What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 17 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 17 of 39

5340-33-105-9607
Mounting Plate

331059607
A52-01-08: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-33-202-9573
Mounting Bracket

332029573
223552775-01: RNCC: 3 | RNVC: 2
223552775: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-205-3031
Access Cover

332053031
13502-10F00: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-201-6353
Block Clamp

332016353
223561704-01: RNCC: 3 | RNVC: 2

19 Sep 2002

5340-33-201-9519
Access Cover

332019519
723591332-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-201-9848
Access Cover

332019848
223591327-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-005-3455
Support Hook

330053455
505050501: RNCC: 3 | RNVC: 2
VM-GANCHOT: RNCC: 5 | RNVC: 2
PCAMI/TG/CP05530006: RNCC: 6 | RNVC: 9

2 Jul 2001

5340-33-107-8663
Buckle

331078663
300HN13030: RNCC: 3 | RNVC: 2
PCAMI/RP/2605830109: RNCC: 6 | RNVC: 9

10 Jul 2000

5340-33-116-4688
Bolt And Spacer Kit

331164688
92095204924: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-201-6484
T Bracket

332016484
1025-901447: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-125-7293
Access Cover

331257293
9.3021.97.2.0094: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-200-4428
Access Cover

332004428
WW 321 489 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-003-1216
Expansion Plug

330031216
70100122-0: RNCC: 3 | RNVC: 2
-0650610: RNCC: 5 | RNVC: 2

29 Aug 1995

5340-33-181-1148
Retaining Strap

331811148
-16754-61501: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-9968
Mounting Bracket

330009968
35-23371-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-145-6366
Access Cover

331456366
236P-0539: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1246
Retaining Clip

331071246
610104001: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010401: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-116-8265
Mending Plate

331168265
M4T403-01-18: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-3734
Mounting Plate

330043734
1.077.91.008: RNCC: 3 | RNVC: 2
5016834: RNCC: 5 | RNVC: 2

25 Feb 1999

5340-33-200-2269
Mounting Plate

332002269
723571430-01: RNCC: 3 | RNVC: 2
723571430-01: RNCC: 5 | RNVC: 2

15 Nov 2001

5340-33-001-0570
Mounting Bracket

330010570
35-46244-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-154-0251
Butt Hinge

331540251
571892: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-204-6779
Angle Bracket

332046779
PS-610167: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-33-103-5323
Mending Plate

331035323
9505-3-5-10: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-201-4763
Access Cover

332014763
J52464000-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-200-6251
Access Cover

332006251
CE300161-0001: RNCC: 3 | RNVC: 2

8 Feb 2002

5340-33-103-2414
Mounting Plate

331032414
1055-000326: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0048
Mounting Bracket

330010048
35-32344-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-7209
Mounting Bracket

332017209
1025-900927: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-145-5638
Mounting Bracket

331455638
03-273: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7453
Mending Plate

331557453
515912: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-6656
Mounting Bracket

332026656
9673.250.1210: RNCC: 3 | RNVC: 2
1005900333: RNCC: 5 | RNVC: 2
1005900333: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-103-1864
Mounting Bracket

331031864
2510-001985: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-6598
Mounting Bracket

330016598
35-53168-0001: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-116-0350
Angle Bracket

331160350
HB-15178000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-7471
Slide Keeper

332057471
35-82273-1402: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-33-156-5049
Loop Clamp

331565049
-62416-01C00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-8898
Mounting Plate

332028898
1272050111: RNCC: 3 | RNVC: 2

25 Nov 2003

5340-33-126-2463
Access Cover

331262463
1125-6: RNCC: 3 | RNVC: 9

28 Jul 1995

5340-33-201-3648
Bow Handle

332013648
01.723.30: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-200-2892
Mounting Plate

332002892
723571414-01: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-33-201-8176
Cushioning Pad

332018176
1005005942: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-154-2219
Mending Plate

331542219
565311: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-205-6138
Retaining Strap

332056138
1025900340: RNCC: 3 | RNVC: 2
9682.101.1150: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-154-6945
Angle Bracket

331546945
753208: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-9909
Mounting Bracket

330019909
35-46633-1302: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-001-5596
Retaining Strap

330015596
92041324: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-155-7496
Mending Plate

331557496
683572: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-189-1695
Support Hook

331891695
6122013: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-0780
Runner

331030780
2510-001006: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1876
Angle Bracket

332111876
10-65031-0501: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-106-8217
Mounting Bracket

331068217
W280675300305: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-161-7034
Padlock

331617034
302/50: RNCC: 3 | RNVC: 2
F12203030: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-33-153-9672
Door Handle

331539672
509487: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-116-5287
Rim Lock Set

331165287
4449306: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8013
Angle Bracket

331578013
692601: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-9287
Mounting Bracket

331079287
7057.252.0065: RNCC: 3 | RNVC: 2
2510700178: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-000-6714
Retaining Strap

330006714
783728: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-154-6473
Angle Bracket

331546473
821912: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-202-4942
Access Cover

332024942
722422855-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-201-9547
Mounting Bracket

332019547
223591740-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-211-4993
Mounting Bracket

332114993
10-44130-0201: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-116-7839
Mending Plate

331167839
DSH-127: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3582
Access Cover

332003582
223571523-01: RNCC: 3 | RNVC: 2
223571523-01: RNCC: 5 | RNVC: 2

16 Jan 2002

5340-33-211-1918
Angle Bracket

332111918
INS030216002000000: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-180-5545
Pad Eye

331805545
242139: RNCC: 3 | RNVC: 2
138764: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-187-5588
Loop Clamp

331875588
0301128-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4963
Loop Clamp

331264963
W280456501320: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2357
Retaining Strap

331892357
01060290: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-7707
Angle Bracket

330047707
-02305040-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-003-0754
Retaining Strap

330030754
01605234-0: RNCC: 3 | RNVC: 2
61706-0: RNCC: 5 | RNVC: 2
BN-61706: RNCC: 5 | RNVC: 2

29 Aug 1995

5340-33-136-5031
Loop Clamp

331365031
CMD-MB1-TOA-113: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-33-001-0786
Turnbuckle

330010786
35-46400-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-002-1234
Turnbuckle Body

330021234
2530-000187: RNCC: 3 | RNVC: 2

8 Jun 1993

5340-33-103-0963
Mounting Bracket

331030963
411.091.0606: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5316
Mounting Plate

331065316
A0201020: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-33-145-5450
Angle Bracket

331455450
04-214: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-0729
Retaining Strap

330030729
0023092007: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-153-9668
Door Handle

331539668
507048: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-107-3016
Mounting Plate

331073016
21124231000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-107-6392
Mounting Bracket

331076392
7060.252.0140: RNCC: 3 | RNVC: 2
2510700314: RNCC: 5 | RNVC: 2

17 Mar 2000

5340-33-160-0616
Retaining Clip

331600616
5903.22: RNCC: 3 | RNVC: 2

23 Nov 1995

5340-33-103-5156
Retaining Strap

331035156
1443-28-29: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-154-6064
Catch Strike

331546064
320099: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-205-4098
Access Cover

332054098
5039949: RNCC: 3 | RNVC: 2
1.143.51.030: RNCC: 5 | RNVC: 2

15 Sep 2006

5340-33-205-6244
Access Cover

332056244
35-13310-0501A01: RNCC: 3 | RNVC: 2

17 Jan 2007

5340-33-001-2300
Rod End Connector

330012300
35-82200-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-7602
Mechanical Stop

331077602
SP08040: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-002-0102
Padlock

330020102
55 LD: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-181-8338
Mounting Plate

331818338
-11100258-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-9892
Mounting Bracket

332019892
1025-901586: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-201-2178
Utility Access Door

332012178
A2810435-402: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-001-1295
Mounting Bracket

330011295
35-52235-0701: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-158-5537
Retaining Clip

331585537
-922150-M1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3679
Compression Cup

330013679
92019215: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-201-6980
Mounting Bracket

332016980
TOM0820033: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-33-000-7496
Angle Bracket

330007496
500006075: RNCC: 3 | RNVC: 2
695993: RNCC: 5 | RNVC: 9

21 Sep 1988

5340-33-107-6294
Strap Hinge

331076294
7060.252.0115: RNCC: 3 | RNVC: 2
2510700795: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-003-4041
Access Hole Frame

330034041
11.28944-1775: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-200-8858
Mounting Plate

332008858
W290698420200: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-156-4572
Self-Locking Insert

331564572
-55060-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7947
Mending Plate

331577947
645437: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-3553
Angle Bracket

331813553
-01601084-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-1481
Mounting Bracket

331021481
B-2-75: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-205-0139
Mounting Bracket

332050139
0227313: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-33-126-2406
Catch Strike

331262406
H2L083: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6968
Loop Clamp

330006968
594245: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-106-6025
Mounting Bracket

331066025
755278: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-108-2567
Elbow Catch

331082567
9644.251.0830: RNCC: 3 | RNVC: 2
2510009784: RNCC: 5 | RNVC: 2
2510009784: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-206-2956
Angle Bracket

332062956
J57166502-003: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-33-204-4453
Filler Opening Cap

332044453
M.A.S. 841-13.18-25: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-001-0030
Mending Plate

330010030
35-32244-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-7652
Detent Plunger

332027652
709051508: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-33-000-6945
Loop Clamp

330006945
562031: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-106-3340
Angle Bracket

331063340
768802: RNCC: 3 | RNVC: 2

11 Sep 1997

5340-33-200-8926
Mounting Plate

332008926
W290698609000: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-181-5579
Mounting Plate

331815579
-01200054: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-7892
Extension Handle

332057892
27020: RNCC: 3 | RNVC: 2
8414366270205: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-33-180-9377
Loop Clamp

331809377
155208: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-4455
Webbing Strap

331084455
9644.250.6299: RNCC: 3 | RNVC: 2
2540001242: RNCC: 5 | RNVC: 2
2540001242: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-161-2814
Access Cover

331612814
1415522036: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-180-6919
Loop Clamp

331806919
240429: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-1255
Mounting Plate

332041255
1005900558: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-33-204-6889
Flush Catch

332046889
PS-902280: RNCC: 3 | RNVC: 2

7 Dec 2005

5340-33-116-8494
Mending Plate

331168494
5156/21: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-002-1546
Mounting Bracket

330021546
318548: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-204-4955
Mounting Bracket

332044955
R25E120400: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-33-205-9591
Access Cover

332059591
709032711: RNCC: 3 | RNVC: 2

31 May 2007

5340-33-102-3765
Access Cover

331023765
MD51-4-12: RNCC: 3 | RNVC: 2
MD51-4-12: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-5020
Angle Bracket

332115020
J00860101-402: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-106-5377
Furniture Cup

331065377
C0302120: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0302120: RNCC: 4 | RNVC: 1
030212: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-201-4414
Utility Access Door

332014414
720123525: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-107-9983
Mounting Bracket

331079983
9644.250.2760: RNCC: 3 | RNVC: 2
1005900073: RNCC: 5 | RNVC: 2
1005900073: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-33-108-2610
Mounting Plate

331082610
9644.251.0327: RNCC: 3 | RNVC: 2
2510010326: RNCC: 5 | RNVC: 2
2510010326: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-161-3780
Mounting Bracket

331613780
628061: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-202-2626
Mounting Bracket

332022626
W280602000101: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-33-161-4287
Access Cover

331614287
200176: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-180-8084
Access Cover

331808084
576718: RNCC: 3 | RNVC: 2
576718: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-200-6766
Access Cover

332006766
WW 300 713 AR: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-204-9658
Mounting Plate

332049658
0223424: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-33-108-6278
Access Cover

331086278
9644.251.6559: RNCC: 3 | RNVC: 2
2540900520: RNCC: 5 | RNVC: 2
2540900520: RNCC: 5 | RNVC: 2

30 Apr 2001

5340-33-180-5589
Retaining Strap

331805589
153699: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-161-2579
Mounting Bracket

331612579
312108: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-161-2311
Mounting Bracket

331612311
313095: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-204-9439
Access Cover

332049439
201690: RNCC: 3 | RNVC: 2
201690: RNCC: 5 | RNVC: 2
299033M288865: RNCC: 6 | RNVC: 9

24 Feb 2006

5340-33-155-7690
Angle Bracket

331557690
554790: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-7478
Angle Bracket

330007478
552174: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-201-4811
Angle Bracket

332014811
NN60542P01: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-156-2329
Angle Bracket

331562329
-20654-Y9501: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-204-3112
Retaining Strap

332043112
706200014: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-001-6929
Loop Clamp

330016929
CA82900-0001: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-154-6086
Butt Hinge

331546086
810508: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-105-7268
Retaining Strap

331057268
-57235-01C01: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-106-6825
Mounting Bracket

331066825
1PP4136-1009P003: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-33-201-4104
Angle Bracket

332014104
A2811732-403: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-201-2201
Access Door Hinge

332012201
A2810427-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-200-3918
Bridge Clamp

332003918
CF 481 928: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-000-6961
Loop Clamp

330006961
583952: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-200-1414
Mounting Plate

332001414
9644.251.0610: RNCC: 3 | RNVC: 2
2510009954: RNCC: 5 | RNVC: 2
2510009954: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-33-211-2848
Angle Bracket

332112848
TP252569: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-155-2014
Access Cover

331552014
711 7209: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-180-6846
Lever Bracket

331806846
232608: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-203-1495
Access Cover

332031495
9673.250.5900: RNCC: 3 | RNVC: 2
2540900582: RNCC: 5 | RNVC: 2
2540900582: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-200-1237
Mounting Bracket

332001237
324212: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-200-1558
Pipe Hanger

332001558
95-46387-0002A02: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-33-108-6260
Mounting Plate

331086260
9644.250.5464: RNCC: 3 | RNVC: 2
2510007247: RNCC: 5 | RNVC: 2
2510007247: RNCC: 5 | RNVC: 2

30 Apr 2001

5340-33-003-4105
Loop Clamp

330034105
R508-38: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-201-2182
Utility Access Door

332012182
A2810489-003: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-201-4228
Mounting Plate

332014228
A2810436-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-181-1170
Retaining Strap

331811170
-93686-C7610: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-5274
Metal Grille

331615274
312700: RNCC: 3 | RNVC: 2
312700: RNCC: 3 | RNVC: 2
2510005663: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-106-5598
Loop Clamp

331065598
2990000151: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-158-8637
Access Cover

331588637
-01201421-4: RNCC: 3 | RNVC: 2
-01201421-3: RNCC: 5 | RNVC: 2
-01201421-6: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-105-1197
Mounting Bracket

331051197
CMA90100-3/5-2: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-107-1232
Access Door Hinge

331071232
610103101: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010311: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-115-9277
Mounting Plate

331159277
DSH-109: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1687
Mounting Bracket

330011687
35-61297-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-7513
Mounting Plate

332047513
5038122: RNCC: 3 | RNVC: 2
1.124.60.050.03-A: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-205-3856
Access Cover

332053856
5032410: RNCC: 3 | RNVC: 2
1.128.72.034: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-33-188-8568
Hook Handle

331888568
1060051: RNCC: 3 | RNVC: 2

18 Sep 1995

5340-33-154-5534
Retaining Strap

331545534
322427: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-201-4084
Bail Handle

332014084
222433313-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-202-9055
Mounting Plate

332029055
223551758-01: RNCC: 3 | RNVC: 2
223551758: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-201-2973
Access Cover

332012973
222433522-01: RNCC: 3 | RNVC: 2
222433522-01: RNCC: 5 | RNVC: 2

20 Jun 2002

5340-33-102-2933
Mounting Bracket

331022933
976-1G-1: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-001-1056
Mounting Bracket

330011056
35-46735-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-002-4050
Mounting Bracket

330024050
DTM-24KT: RNCC: 3 | RNVC: 2
DTM-24PT: RNCC: 3 | RNVC: 2
PMR/DTM: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-33-209-2806
Bumper

332092806
MCG 11112-BP-100: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-33-126-4201
Angle Bracket

331264201
C22136-N1000-C223: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-001-6102
Retaining Strap

330016102
IA-340-360: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-126-2308
Access Cover

331262308
H11930/2/21/2: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-202-9839
Mounting Plate

332029839
723552765-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-4209
Angle Bracket

332014209
A2811763-003: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-33-201-2202
Access Door Hinge

332012202
A2810497-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-001-0998
Mounting Bracket

330010998
35-46689-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-002-0557
Mounting Bracket

330020557
C-20030-4/2-I-05-19: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-161-6114
Access Cover

331616114
6371-039: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-188-8699
Access Cover

331888699
9.325.1.986.002.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0091
Mortise Lock Set

330020091
C.P.3.: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-190-3537
Mounting Bracket

331903537
3-89261: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-000-2472
Expansion Plug

330002472
3340801471: RNCC: 1 | RNVC: 2
3340801471: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-116-1594
Mounting Bracket

331161594
3 015 134: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-7324
Doorknob

330037324
P-S-E-0005: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-108-4187
Webbing Strap

331084187
9644.250.0798: RNCC: 3 | RNVC: 2
1005006027: RNCC: 5 | RNVC: 2
1005006027: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-202-7075
Mounting Bracket

332027075
9673.290.5360: RNCC: 3 | RNVC: 2
2910900130: RNCC: 5 | RNVC: 2
2910900130: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-156-4623
Door Handle

331564623
-82606-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0617
Mounting Bracket

332050617
0309045: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-33-003-6731
Mounting Bracket

330036731
2510003177: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-202-9971
Angle Bracket

332029971
MHC2120950: RNCC: 3 | RNVC: 2
MHC1120950: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-154-6926
Angle Bracket

331546926
318697: RNCC: 3 | RNVC: 2
318697: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-181-5882
Mechanical Stop

331815882
-01201877: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-9998
Mounting Bracket

330019998
35-51235-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-003-4037
Loop Clamp

330034037
11.28986-0076: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-106-5332
Locking Stay

331065332
C0601080: RNCC: 3 | RNVC: 2
PCAMI/RP/32C0601080: RNCC: 4 | RNVC: 1
060108: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-001-8519
Expansion Shield

330018519
20050-57CC: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-181-0281
Access Cover

331810281
-19217-99000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-9543
Access Cover

332019543
223591710-02: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-201-1827
Mounting Bracket

332011827
222432712-01: RNCC: 3 | RNVC: 2

29 May 2002

5340-33-116-0899
Mounting Bracket

331160899
BA-18134000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9937
Swivel Caster

332029937
14-29-125S: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-5591
Track Stop

332025591
95-21407-0001: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-200-8580
Plain Solid Disk

332008580
7062.252.0054: RNCC: 3 | RNVC: 2
2510700676: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-106-8022
Pipe Hanger

331068022
4.042-400.0-MEISA: RNCC: 3 | RNVC: 2
PCAMI/RP/1204042400: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-202-6692
Mounting Bracket

332026692
9673.250.1550: RNCC: 3 | RNVC: 2
1005900454: RNCC: 5 | RNVC: 2
1005900454: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-004-5232
Access Cover

330045232
920579: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-115-9273
Mounting Plate

331159273
DSH-725: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-1777
Plug Button

332011777
35-15050-0201: RNCC: 3 | RNVC: 2

27 May 2002

5340-33-108-6995
Webbing Strap

331086995
324259: RNCC: 3 | RNVC: 2
324259: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-154-2242
Mending Plate

331542242
743323: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-206-3341
Retaining Strap

332063341
14501401: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-33-108-5293
Angle Bracket

331085293
9644.100.0075: RNCC: 3 | RNVC: 2
1005005195: RNCC: 5 | RNVC: 2
1005005195: RNCC: 5 | RNVC: 2

27 Apr 2001

5340-33-157-8529
Loop Clamp

331578529
781390: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-000-7065
Retaining Band

330007065
642599: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-154-2227
Mending Plate

331542227
575959: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-3823
Access Cover

330013823
92020157: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-155-7525
Mending Plate

331557525
753869: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-7002
Loop Clamp

330007002
802459: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-6988
Loop Clamp

330006988
780944: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-7910
Access Cover

331577910
639008: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6943
Loop Clamp

330006943
561839: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-106-3650
Access Cover

331063650
7139-28: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-114-4749
Mounting Bracket

331144749
5TG 5-2: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-0815
Mounting Bracket

330010815
35-46439-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-003-4895
Lock Bolt

330034895
105 6919: RNCC: 3 | RNVC: 2

6 Nov 1997

5340-33-116-5286
Mounting Plate

331165286
4008763: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4704
Angle Bracket

330014704
92026720: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-9712
Mounting Plate

332009712
2510003218: RNCC: 3 | RNVC: 2
2510003218: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-145-6367
Access Cover

331456367
236P-0738: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-0185
Mounting Plate

332000185
J29169053-401: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-157-0170
Access Cover

331570170
-68240-Y9505: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3665
Retaining Strap

330013665
92019104: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-6245
Mounting Bracket

332026245
9673.250.0383: RNCC: 3 | RNVC: 2
1005900383: RNCC: 5 | RNVC: 2
1005900383: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-001-0107
Mounting Bracket

330010107
35-34184-0105: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-8469
Mounting Plate

331078469
-10005-22J00: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-154-0249
Butt Hinge

331540249
571232: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-154-4152
Loop Clamp

331544152
3090201949: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-189-2045
Elastic Strap

331892045
01100110: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-005-3880
Lock-Release Lever

330053880
3PP4083-6053P1: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-203-7618
Mounting Bracket

332037618
TOM1000077: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-33-003-6762
Mounting Bracket

330036762
311731: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-154-7479
Bow Handle

331547479
323009: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-160-7540
Plug Button

331607540
79.03.074.169: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-6878
Detent Plunger

331076878
CF 475 519 A: RNCC: 3 | RNVC: 2
59.51.052: RNCC: 5 | RNVC: 2

3 May 2000

5340-33-158-4008
Mounting Bracket

331584008
-04200312-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-3831
Access Cover

331543831
569030: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-003-2454
Webbing Strap

330032454
221023140: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-001-3707
Compression Cup

330013707
92019311: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-145-5452
Angle Bracket

331455452
70-705: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3826
Compression Cup

330013826
92020160: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-9636
Retaining Clip

331549636
90221828: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-104-1067
Strap End Clip

331041067
315572: RNCC: 3 | RNVC: 2

11 Mar 1997

5340-33-157-8650
Access Cover

331578650
809657: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0893
Webbing Strap

330020893
317861: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-155-7476
Mending Plate

331557476
550346: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-107-9286
Mounting Bracket

331079286
7057.252.0064: RNCC: 3 | RNVC: 2
2510700177: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-161-2852
Loop Clamp

331612852
1420326070: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6497
Loop Clamp

331546497
3090211249: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-161-6156
Mounting Bracket

331616156
108.128A: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8559
Angle Bracket

331578559
785344: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4450
Mounting Bracket

331084450
9644.250.8760: RNCC: 3 | RNVC: 2
2540001223: RNCC: 5 | RNVC: 2
2540001223: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-3034
Bow Handle

331073034
21124504500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-205-4292
Rod End Clevis

332054292
1025901992: RNCC: 3 | RNVC: 2
9743.100.0615: RNCC: 5 | RNVC: 2

22 Sep 2006

5340-33-204-8909
Mounting Plate

332048909
992.100.095: RNCC: 3 | RNVC: 2

20 Feb 2006

5340-33-206-8601
Utility Resilient Mount

332068601
122043: RNCC: 3 | RNVC: 2
M18119: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-33-004-2849
Angle Bracket

330042849
NN60176P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-200-9966
Access Cover

332009966
2510901428: RNCC: 3 | RNVC: 2
2510901428: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-4647
Access Cover

330014647
92026605: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-205-0122
Angle Bracket

332050122
19653110: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-116-0644
Loop Clamp

331160644
1313000003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8020
Mounting Bracket

332038020
9356.252.7502: RNCC: 3 | RNVC: 2
2590.900284: RNCC: 5 | RNVC: 2

27 Oct 2004

5340-33-157-7407
Angle Bracket

331577407
515442: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-200-2672
Utility Access Door

332002672
100402020000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-126-9035
Locking Stay

331269035
25401025-2: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-190-2535
Retaining Strap

331902535
3214: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-188-8321
Doorknob

331888321
6101034: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-188-8327
Door Closer

331888327
6102037: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-204-6416
Retaining Strap

332046416
0850483001200: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-115-8656
Loop Clamp

331158656
RNSL94: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-204-4959
Mounting Bracket

332044959
GAEL320000: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-33-210-8211
Angle Bracket

332108211
INS003138990100000: RNCC: 3 | RNVC: 2

16 Feb 2013

5340-33-211-4914
Access Cover

332114914
0738150530: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-33-200-8036
Bridge Clamp

332008036
1005.002558: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-200-6908
Sliding Block

332006908
17516224: RNCC: 3 | RNVC: 2

25 Feb 2002

5340-33-200-9731
Lock-Release Lever

332009731
2510008308: RNCC: 3 | RNVC: 2
2510008308: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-205-3171
Stand Base

332053171
220173155: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-33-200-9827
Mounting Plate

332009827
2510009527: RNCC: 3 | RNVC: 2
2510009527: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-201-0255
Crank Handle

332010255
3465010299: RNCC: 3 | RNVC: 2
3465010299: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-004-2848
Angle Bracket

330042848
NN60068P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-203-6916
Utility Access Door

332036916
ETRS021510: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-33-002-9452
Butt Hinge

330029452
6316250451: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-205-5688
Cushioning Pad

332055688
W267005000003: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-33-107-1799
Retaining Strap

331071799
01205140-0: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-002-4861
Access Cover

330024861
212-24100-60-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-106-7743
Angle Bracket

331067743
34789: RNCC: 3 | RNVC: 2
4350169: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-002-9812
Mounting Plate

330029812
0174342: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-161-5384
Mounting Bracket

331615384
318450: RNCC: 3 | RNVC: 2
318450: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2155
Access Door Hinge

331072155
PCAMI/RP/0400000510: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-33-205-7931
Mounting Plate

332057931
800920: RNCC: 3 | RNVC: 2
800920: RNCC: 5 | RNVC: 2
2990-33-M20-2473: RNCC: 6 | RNVC: 9

28 Mar 2007

5340-33-103-2410
Mounting Plate

331032410
1055-000322: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0024
Mounting Plate

332060024
MB-64: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-33-103-2256
Rod End Clevis

331032256
1055-000150: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2781
Access Cover

332012781
A2810570-001: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-33-145-5270
Access Cover

331455270
78-056: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-5110
Access Cover

331165110
3066704: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9129
Mounting Plate

332009129
709031102: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-004-2833
Angle Bracket

330042833
NN60075P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-000-7006
Loop Clamp

330007006
803601: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-160-5988
Lever Bracket

331605988
95.607.297: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3116
Angle Bracket

331163116
8865.090: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7048
Loop Clamp

332027048
9673.250.0920: RNCC: 3 | RNVC: 2
2510901093: RNCC: 5 | RNVC: 2
2510901093: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-106-1359
Mending Plate

331061359
631 628 01 28: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-33-155-0620
Rod End Connector

331550620
7348747: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-002-9613
Clamping Catch

330029613
6317500584: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-200-3137
Mounting Bracket

332003137
28150303: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-33-158-5609
Rim Lock

331585609
158387: RNCC: 3 | RNVC: 2
158387: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-201-5264
Mounting Plate

332015264
9644.101.0560: RNCC: 3 | RNVC: 2
1005006550: RNCC: 5 | RNVC: 2
1005006550: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-155-7455
Mending Plate

331557455
320352: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-0462
Angle Bracket

330000462
H350GS/D021/5/II: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-155-7713
Angle Bracket

331557713
642126: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-210-9301
Mounting Bracket

332109301
105051: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-33-201-0168
Bridge Clamp

332010168
2590900136: RNCC: 3 | RNVC: 2
2590900136: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-108-5318
Mounting Bracket

331085318
9644.250.2790: RNCC: 3 | RNVC: 2
1005900076: RNCC: 5 | RNVC: 2
1005900076: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-154-6488
Loop Clamp

331546488
3090201511: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-108-0472
Mechanical Stop

331080472
9644.281.5018: RNCC: 3 | RNVC: 2
2520000421: RNCC: 5 | RNVC: 2
2520000421: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-187-9903
Mending Plate

331879903
FA 020021.01: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-004-4040
Access Cover

330044040
0081.032: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-160-5794
Mechanical Stop

331605794
79.03.088.018: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-5207
Flange Protector

331805207
NRC3449: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-4346
Mounting Bracket

331264346
C22156-N1000-B18: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8472
Angle Bracket

331078472
-11710-G9900: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-108-0234
Mounting Bracket

331080234
9644.251.9530: RNCC: 3 | RNVC: 2
2540900433: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-104-8641
Blank Panel

331048641
757145: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-104-0775
Access Door Hinge

331040775
154319: RNCC: 3 | RNVC: 2

23 Jun 1995

5340-33-000-1982
Access Cover

330001982
645309: RNCC: 1 | RNVC: 2
645309: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-001-5397
Angle Bracket

330015397
92040416: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-190-2539
Retaining Strap

331902539
3221: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-202-9118
Mounting Bracket

332029118
1025-901760: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-7709
Mounting Bracket

332027709
INS0470/0097: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-203-8745
Utility Access Door

332038745
PCAMI/RP/27A0502020: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-33-115-5585
Access Hole Frame

331155585
H8/225/PH/20/1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5253
Furniture Cup

331065253
A0101050: RNCC: 3 | RNVC: 2
PCAMI/RP/27A0101050: RNCC: 4 | RNVC: 1
010105: RNCC: 5 | RNVC: 1

3 Apr 1998

5340-33-126-1374
Mounting Bracket

331261374
C22156-N1000-C2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5007
Loop Clamp

331565007
-01555-00401: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4092
Angle Bracket

332014092
A2810567-403: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-116-0335
Mending Plate

331160335
BL-11281010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-2839
Mechanical Stop

331612839
180600.95: RNCC: 3 | RNVC: 2
180600 95: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-202-6691
Mounting Bracket

332026691
9673.250.0419: RNCC: 3 | RNVC: 2
1005900452: RNCC: 5 | RNVC: 2
1005900452: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-001-3473
Retaining Strap

330013473
92014811: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-0192
Access Cover

331570192
-16829-V0700: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3548
Catch Strike

332013548
92492914053: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-104-7759
Turnbuckle

331047759
9.2021.65.0.0064: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7237
Roller Holder

331067237
1PP4122-1106P001: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-153-9688
Door Handle

331539688
810720: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-202-9863
Mounting Bracket

332029863
223551806-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-9850
Mounting Plate

332019850
223591742-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-211-2603
Access Cover

332112603
BRIDA 8-12 IN: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-33-102-1911
Mending Plate

331021911
MCL-5-47: RNCC: 3 | RNVC: 2
52530000470: RNCC: 3 | RNVC: 2
MCL-5-47: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-001-0664
Mounting Bracket

330010664
35-46298-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-6977
Loop Clamp

330006977
739252: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-106-6156
Retaining Strap

331066156
-80520-G9600: RNCC: 3 | RNVC: 2

14 Sep 1998

5340-33-190-5281
Access Cover

331905281
136.110: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-5146
Retaining Strap

331035146
1443-8-9: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-002-0064
Retaining Strap

330020064
35-71102-0101: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-000-1980
Access Cover

330001980
579503: RNCC: 1 | RNVC: 2
579503: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-000-6689
Retaining Strap

330006689
590302: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-200-2773
Hook Handle

332002773
100441020002: RNCC: 3 | RNVC: 2
6100341050002: RNCC: 5 | RNVC: 2

21 Nov 2001

5340-33-001-3694
Mounting Bracket

330013694
92019231: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-203-9481
Angle Bracket

332039481
20410416: RNCC: 3 | RNVC: 2
33R288302: RNCC: 5 | RNVC: 1

26 Jan 2005

5340-33-160-3800
Retaining Strap

331603800
26.199.659: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0375
Loop Clamp

332040375
09403-12310: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-33-157-7768
Angle Bracket

331577768
595446: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-5114
Mortise Lock Set

331615114
230067: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-6081
Mounting Bracket

331606081
93.502.074: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0098
Padlock

330020098
45 P: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-181-1179
Mortise Lock Set

331811179
-90502-G9600: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-3061
Webbing Strap

332043061
220301050: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-33-190-3954
Mounting Bracket

331903954
1821: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-002-0646
Mounting Plate

330020646
GRF3H2: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-102-2878
Case Corner

331022878
976-A-10: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-004-5188
Expansion Plug

330045188
6720478DER: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-157-0129
Access Cover

331570129
-87371-Y9550: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7369
Access Cover

331577369
508072: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-8882
Expansion Shield

330018882
C-20050-12-1-I-01-24: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-160-3677
Retaining Strap

331603677
EV-2501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0419
Locking Stay

330000419
H350GS/D00615: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-203-3457
Mounting Plate

332033457
CS-EF2-AG1040901: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-161-2171
Access Cover

331612171
2540-000177: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-33-201-2200
Access Cover

332012200
A2810586-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-116-1373
Mounting Plate

331161373
BA-11261101: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-9128
Utility Resilient Mount

332069128
002174: RNCC: 3 | RNVC: 2

16 Sep 2008

5340-33-200-4279
Loop Clamp

332004279
4730700097: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-33-155-7728
Angle Bracket

331557728
750071: RNCC: 3 | RNVC: 2
750071: RNCC: 6 | RNVC: 9

18 Oct 1990

5340-33-155-7743
Angle Bracket

331557743
5340001034: RNCC: 3 | RNVC: 2
311934: RNCC: 3 | RNVC: 2
311934: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-9019
Mounting Plate

332029019
223551372-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-002-7104
Retaining Strap

330027104
NG-14403-1789: RNCC: 3 | RNVC: 2
0014403: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-116-3728
Plain Solid Disk

331163728
8990.019: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4773
Access Cover

332014773
J52464021-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-206-4105
Stand Base

332064105
STB XBA 2200: RNCC: 3 | RNVC: 2

27 Dec 2007

5340-33-001-0995
Mounting Bracket

330010995
35-46689-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-0817
Retaining Strap

331020817
E-0-16: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-106-4000
Locking Stay

331064000
-90450-04C28: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-102-1505
Access Cover

331021505
B-2-58: RNCC: 3 | RNVC: 2

6 Nov 1990

5340-33-116-0903
Mounting Bracket

331160903
BJ-18134070: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-1766
Mending Plate

332031766
067.G.05.02: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-33-157-1998
Rod End Clevis

331571998
-16900237-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1339
Mounting Bracket

330011339
35-53174-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-1645
Mounting Bracket

331071645
PCAMI/RP/0306101141: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-001-0646
Mounting Bracket

330010646
35-46288-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-211-1233
Access Cover

332111233
VR01180100: RNCC: 3 | RNVC: 1
VR01180100: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-106-1999
Rod End Clevis

331061999
1777B4146/1.4.14: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-200-4034
Mending Plate

332004034
MC 365-39/E: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-201-0208
Mounting Bracket

332010208
2930000474: RNCC: 3 | RNVC: 2
2930000474: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-107-6338
Mounting Bracket

331076338
7060.252.0160: RNCC: 3 | RNVC: 2
2510700229: RNCC: 5 | RNVC: 2

17 Mar 2000

5340-33-154-6670
Access Cover

331546670
770863: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-106-5624
Bumper

331065624
02311007-0: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-203-6871
Utility Access Door

332036871
2123010250-1: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-211-2985
Metal Grille

332112985
5061371: RNCC: 3 | RNVC: 2
1.164.02.015: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-158-2235
Retaining Clip

331582235
0216527-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-5851
Mending Plate

331815851
-01201639-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-4404
Mounting Plate

332004404
WW 186 096 B: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-001-1170
Rod End Clevis

330011170
35-49114-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-6517
Rod End Clevis

330016517
35-45000-0101-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-116-5530
Access Cover

331165530
28410-ZE2-003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-1629
Snap Hook

330031629
ISNH30: RNCC: 3 | RNVC: 2
960420-BA-30: RNCC: 5 | RNVC: 2
ISNH30: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-33-205-3666
Mounting Plate

332053666
5035171: RNCC: 3 | RNVC: 2
1.128.33.029: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-33-201-4008
Angle Bracket

332014008
A2810483-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-116-7115
Access Cover

331167115
A-128.353: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8778
Access Cover

331078778
50.28.004.B: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-211-2990
Mounting Plate

332112990
5061539: RNCC: 3 | RNVC: 2
1.164.91.001: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-187-2273
Loop Clamp

331872273
24,0.104: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-1422
Access Cover

332051422
1.120.29.03.010: RNCC: 3 | RNVC: 2

12 May 2006

5340-33-156-0160
Pipe Hanger

331560160
-77300037-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1587
Mounting Bracket

331161587
3 127 416: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1465
Mounting Bracket

332111465
VR03020900: RNCC: 3 | RNVC: 2
VR03020900: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-33-161-6757
Plain Solid Disk

331616757
91207: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-190-5715
Access Hole Frame

331905715
S43311989-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-9936
Access Cover

332019936
8867 049-101: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-003-3956
Access Cover

330033956
11.16088-0028: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-126-2405
Expansion Plug

331262405
209: RNCC: 3 | RNVC: 2
PFCP-12: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-204-6206
Rod End Clevis

332046206
5032859: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-33-002-2644
Rod End Connector

330022644
573486: RNCC: 3 | RNVC: 2
EN 573486: RNCC: 5 | RNVC: 2
573486: RNCC: 5 | RNVC: 2

18 Apr 1994

5340-33-145-5451
Angle Bracket

331455451
70-259: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-3363
Mechanical Stop

332063363
CA-56800-5103: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-33-200-6265
Access Cover

332006265
CE600025-000: RNCC: 3 | RNVC: 2

8 Feb 2002

5340-33-154-8274
Door Handle

331548274
4474346: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-001-3409
Compression Cup

330013409
92014641: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-158-7204
Access Cover

331587204
6.0690.12.5.0414: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-105-0493
Rod End Clevis

331050493
REM-25-4-3-7: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-001-0621
Mounting Bracket

330010621
35-46272-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-002-0066
Webbing Strap

330020066
35-81394-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-000-0991
Detent Plunger

330000991
C4300/064: RNCC: 1 | RNVC: 2

29 Aug 1996

5340-33-160-3676
Retaining Strap

331603676
BW-131: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-4969
Block Clamp

332114969
J00860105-401: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-205-9330
Mechanical Stop

332059330
5029723: RNCC: 3 | RNVC: 2
2.159.003: RNCC: 5 | RNVC: 2

23 May 2007

5340-33-206-0005
Mounting Plate

332060005
J92563811-002: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-33-001-1476
Mounting Bracket

330011476
35-55001-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0492
Mounting Bracket

330010492
35-46175-0007: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-4467
Retaining Band

332044467
PS-610080: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-001-1938
Mounting Bracket

330011938
35-66113-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-102-5910
Friction Catch Stud

331025910
273-C: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-6928
Blank Panel

331556928
755959: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-8196
Utility Access Door

332018196
2540000599: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-202-4779
Bridge Clamp

332024779
U-025.066 (CJTO): RNCC: 3 | RNVC: 2
5004979: RNCC: 5 | RNVC: 2

7 Jul 2003

5340-33-155-4193
Access Cover

331554193
521643: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-155-7541
Mending Plate

331557541
594801: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-156-2339
Angle Bracket

331562339
-51024-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-158-9569
Access Cover

331589569
00.227.016.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0161
Angle Bracket

332050161
19692910: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-33-204-4087
Mounting Bracket

332044087
W280698406005: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-155-5225
Access Cover

331555225
683812: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-000-6946
Loop Clamp

330006946
562256: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-155-6455
Bow Handle

331556455
324236: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-8206
Mounting Bracket

330048206
NN60476P04: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-107-9621
Mounting Bracket

331079621
00.910.07.670: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-204-0446
Mounting Plate

332040446
114250-51080: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-33-201-0164
Mounting Bracket

332010164
2540901193: RNCC: 3 | RNVC: 2
2540901193: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-201-9894
Mounting Bracket

332019894
1025-901705: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-000-7003
Loop Clamp

330007003
802763: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-116-8646
Mounting Plate

331168646
598/2-5: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-005-3259
Rigid Caster

330053259
RAL-200-2-4-0: RNCC: 3 | RNVC: 2

25 Jun 2001

Load More Results