What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 16 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 16 of 39

5340-33-004-4227
Expansion Plug

330044227
DIN443-B28-MS63: RNCC: 3 | RNVC: 2
DIN443-B28-MS63: RNCC: 5 | RNVC: 2

25 Mar 1999

5340-33-114-3973
Mounting Bracket

331143973
WW 407 728: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-209-7667
Utility Guard Rail Section

332097667
0661.10.4505.00: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-156-2337
Angle Bracket

331562337
-55202-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-181-8425
Mounting Plate

331818425
-11500528-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-9912
Angle Bracket

330009912
35-22202-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-6734
Door Handle

331076734
631 760 11 59: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-155-9240
Mounting Bracket

331559240
647240: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-201-7756
Mounting Bracket

332017756
MAM-EF18-08-00-02: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-154-2251
Mending Plate

331542251
768975: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-126-2929
Rod End Clevis

331262929
1640100: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-154-7486
Butt Hinge

331547486
320764: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-201-7935
Mounting Bracket

332017935
319659: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-33-108-2613
Mounting Bracket

331082613
9644.121.0170: RNCC: 3 | RNVC: 2
2510010334: RNCC: 5 | RNVC: 2
2510010334: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-161-2638
Access Cover

331612638
314323: RNCC: 3 | RNVC: 2
314323: RNCC: 5 | RNVC: 2

5 Jul 1993

5340-33-106-8175
Mounting Bracket

331068175
5975000656: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-204-3917
Expansion Shield

332043917
500.005.00: RNCC: 3 | RNVC: 2

7 Sep 2005

5340-33-001-9908
Mounting Bracket

330019908
35-46633-1301: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-156-2175
Angle Bracket

331562175
-20653-Y9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-104-1283
Angle Bracket

331041283
W290622602500: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-33-203-9906
Access Cover

332039906
A15500003: RNCC: 3 | RNVC: 2
IV33R272232: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-105-6311
Hand Crank

331056311
230262: RNCC: 3 | RNVC: 2
9999991203: RNCC: 5 | RNVC: 2

9 May 1996

5340-33-201-6976
Mounting Bracket

332016976
TOM0818953: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-33-161-3900
Pad Eye

331613900
646547: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-33-107-2471
Access Cover

331072471
16334077: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-204-1718
Angle Bracket

332041718
2510901916: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-33-003-4021
Rod End Clevis

330034021
11.20374-9027: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-001-3197
Compression Cup

330013197
92010106: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-000-6707
Retaining Strap

330006707
761076: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-000-6701
Retaining Strap

330006701
698040: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-001-4376
Access Cover

330014376
92026239: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-105-5791
Loop Clamp

331055791
-09101087-0: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-200-1190
Bow Handle

332001190
7059.252.0510: RNCC: 3 | RNVC: 2
2510700745: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-104-9041
Retaining Strap

331049041
739601: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-157-8095
Access Cover

331578095
731168: RNCC: 3 | RNVC: 2
15100054: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-33-157-7244
Access Cover

331577244
317931: RNCC: 3 | RNVC: 2
317931: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-206-2012
Mounting Plate

332062012
CBD58505P69: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-001-0770
Mounting Bracket

330010770
35-46376-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-210-1564
Clamping Catch

332101564
SRC1110149-001: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-33-156-5024
Loop Clamp

331565024
-01552-00481: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-9695
Mounting Bracket

330009695
35-13393-0104: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-3515
Access Cover

332023515
W290609501300: RNCC: 3 | RNVC: 2

16 Apr 2003

5340-33-161-4521
Access Cover

331614521
G04049: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-0891
Webbing Strap

330020891
2510005671: RNCC: 3 | RNVC: 2
319952: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-154-8496
Access Cover

331548496
20025-42: RNCC: 3 | RNVC: 2
20025.42: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-181-8672
Angle Bracket

331818672
-14200269-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-5819
Bow Handle

332115819
212-81312-1: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-33-201-7882
Angle Bracket

332017882
NN60543P01: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-203-2892
Thumb Latch

332032892
9673.250.5106: RNCC: 3 | RNVC: 2
2510900566: RNCC: 5 | RNVC: 2
2510900566: RNCC: 5 | RNVC: 2

23 Feb 2004

5340-33-209-8478
Utility Resilient Mount

332098478
0861104510: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-202-9963
Angle Bracket

332029963
MHC2120220: RNCC: 3 | RNVC: 2
MHC1120220: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-161-7022
Padlock

331617022
300/30: RNCC: 3 | RNVC: 2
F12003030: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-33-205-3985
Access Cover

332053985
5038792: RNCC: 3 | RNVC: 2
1.143.92.001.01: RNCC: 5 | RNVC: 2

13 Sep 2006

5340-33-200-8716
Retaining Strap

332008716
4730900155: RNCC: 3 | RNVC: 2
DIN 72571/DIA. 4: RNCC: 4 | RNVC: 1

8 Apr 2002

5340-33-201-1813
Mounting Bracket

332011813
222432705-01: RNCC: 3 | RNVC: 2

28 May 2002

5340-33-116-0349
Angle Bracket

331160349
BE-15178000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2049
Angle Bracket

330012049
35-71100-1301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1037
Mounting Bracket

330011037
35-46722-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1329
Access Hole Frame

330011329
35-53163-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-206-0402
Angle Bracket

332060402
NN60960P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-205-6116
Mounting Bracket

332056116
1025901971: RNCC: 3 | RNVC: 2
9743.100.0552: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-105-9337
Loop Clamp

331059337
16446: RNCC: 3 | RNVC: 2

28 Aug 1996

5340-33-107-7369
Access Cover

331077369
325138: RNCC: 3 | RNVC: 2
325138: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-002-9902
Retaining Strap

330029902
1178506: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-116-3947
Mounting Bracket

331163947
EV-2506: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-2144
Plain Solid Disk

331612144
1015-000502: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-33-001-6828
Mounting Bracket

330016828
D56149-00: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-000-0456
Angle Bracket

330000456
H350GS/D099: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-154-5693
Mending Plate

331545693
754569: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-209-3152
Mounting Bracket

332093152
INS003002010060000: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-33-106-7744
Angle Bracket

331067744
34783: RNCC: 3 | RNVC: 2
4350498: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-211-5018
Angle Bracket

332115018
J00860101-401: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-102-0935
Shimmy Damper

331020935
9234-231: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2498
Bow Handle

331032498
1055-000583: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0250
Butt Hinge

331540250
571236: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-003-6704
Leather Strap

330036704
2510001349: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-106-9959
Access Door Hinge

331069959
36.180: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000565: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-160-6495
Threaded Rod End

331606495
DV 9533-267A: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8027
Mending Plate

331578027
697982: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2163
Angle Bracket

331562163
-18452-G9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-156-5034
Loop Clamp

331565034
-46289-G2512: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8036
Bumper

332038036
99.08.126: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-33-203-6359
Shimmy Damper

332036359
303014: RNCC: 3 | RNVC: 2
303014: RNCC: 5 | RNVC: 2

16 Jul 2004

5340-33-107-6339
Mounting Bracket

331076339
7060.252.0190: RNCC: 3 | RNVC: 2
2510700230: RNCC: 5 | RNVC: 2

17 Mar 2000

5340-33-004-2872
Angle Bracket

330042872
NN60187G01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-210-3129
Butt Hinge

332103129
T535S1006221: RNCC: 3 | RNVC: 2

27 Jul 2012

5340-33-161-4364
Mounting Plate

331614364
202292: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-4255
Mounting Plate

330034255
159-423: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-154-2228
Mending Plate

331542228
592835: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-201-6487
Mounting Bracket

332016487
1025-901520: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-201-4083
Access Cover

332014083
223581208-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-200-3962
Mounting Plate

332003962
CF 498 555 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-157-7512
Angle Bracket

331577512
543938: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-003-5080
Door Handle

330035080
95517654TL: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-204-6690
Friction Catch Stud

332046690
PS-902010: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-203-9386
Beam Gripping Clamp

332039386
PS-810013: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-33-001-4374
Access Cover

330014374
92026237: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-4912
Angle Bracket

330014912
92027563: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-2626
Utility Access Door

332002626
100302130000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-200-4480
Mounting Plate

332004480
WW 386 264 AX: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-203-8103
Flush Catch Claw

332038103
99.08.119: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-33-107-7398
Angle Bracket

331077398
W290683111900: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-209-9840
Utility Guard Rail Section

332099840
0664.20.7002.00: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-33-003-6241
Retaining Clip

330036241
315 58: RNCC: 3 | RNVC: 2

25 May 1998

5340-33-001-1686
Access Cover

330011686
35-61291-1601: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1442
Mounting Bracket

330011442
35-54301-0801: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-1750
Loop Clamp

331071750
4730000525: RNCC: 3 | RNVC: 2
DIN 3016 D1 20X43 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-103-1976
Mounting Bracket

331031976
2590-000085: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-107-8659
Buckle

331078659
018HP24131: RNCC: 3 | RNVC: 2
PCAMI/RP/2605830156: RNCC: 6 | RNVC: 9

10 Jul 2000

5340-33-206-1298
Loop Clamp

332061298
500005731: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-33-155-7733
Angle Bracket

331557733
315831: RNCC: 3 | RNVC: 2
315831: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-1686
Loop Clamp

332011686
EN3730F25K0: RNCC: 2 | RNVC: 2

20 May 2002

5340-33-201-4277
Detent Plunger

332014277
1025-900479: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-204-4531
Synchro Clamp

332044531
720124532: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-157-7765
Mending Plate

331577765
594795: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-5732
Access Cover

330015732
92042335: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-202-0486
Stand Base

332020486
1025-900902: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-205-9101
Angle Bracket

332059101
449172: RNCC: 3 | RNVC: 2

10 May 2007

5340-33-205-4262
Metal Grille

332054262
5040400: RNCC: 3 | RNVC: 2
1.143.11.074: RNCC: 5 | RNVC: 2

21 Sep 2006

5340-33-116-8591
Mounting Bracket

331168591
598/1: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-211-2947
Mounting Bracket

332112947
SP08513: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-200-7987
Angle Bracket

332007987
321938: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-158-2236
Retaining Clip

331582236
0216528-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-0801
Corner Brace

331020801
D-4-3D: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-002-0111
Padlock

330020111
75 P: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-115-8650
Loop Clamp

331158650
RN80-85SR: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-001-0623
Mounting Bracket

330010623
35-46272-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-6961
Retaining Strap

331076961
WW 386 404 A: RNCC: 3 | RNVC: 2
59.11.006: RNCC: 5 | RNVC: 2

25 May 2000

5340-33-203-2891
Access Cover

332032891
9673.250.5250: RNCC: 3 | RNVC: 2
2510900565: RNCC: 5 | RNVC: 2
2510900565: RNCC: 5 | RNVC: 2

23 Feb 2004

5340-33-004-2122
Access Cover

330042122
584546: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-200-4506
Mounting Bracket

332004506
WW 458 588 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-204-0645
Webbing Strap

332040645
L63TGGVEO0030MI: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-33-001-4527
Retaining Strap

330014527
92026459: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-188-9243
Access Cover

331889243
3026981: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-160-6300
Mounting Bracket

331606300
79.03.097.545: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0540
Mounting Bracket

332050540
0406012: RNCC: 3 | RNVC: 2

18 Apr 2006

5340-33-204-4551
Mounting Bracket

332044551
0850483000100: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-203-9194
Door Handle

332039194
40.01.05: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-33-160-3690
Bumper

331603690
1670170: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7146
Hinge Torsion Bar

331577146
313513: RNCC: 3 | RNVC: 2
313513: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-3798
Retaining Clip

330023798
S3-CT: RNCC: 3 | RNVC: 2
28258047: RNCC: 5 | RNVC: 2

19 Jan 1995

5340-33-209-0942
Utility Access Door

332090942
5051732: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-33-204-7931
Angle Bracket

332047931
291622-8: RNCC: 3 | RNVC: 2

24 Jan 2006

5340-33-201-7086
Mounting Bracket

332017086
323076: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-33-154-6530
Loop Clamp

331546530
320796: RNCC: 3 | RNVC: 2
320796: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-001-4815
Access Cover

330014815
92027123: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-157-0212
Access Cover

331570212
-68240-Y9502: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7007
Loop Clamp

330007007
803759: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-205-7141
Mounting Bracket

332057141
1025901930: RNCC: 3 | RNVC: 2
9743.100.0113: RNCC: 5 | RNVC: 2

1 Mar 2007

5340-33-106-5386
Furniture Cup

331065386
C0301030: RNCC: 3 | RNVC: 2
PCAMI/RP/29C03301030: RNCC: 4 | RNVC: 1
00300200487: RNCC: 5 | RNVC: 2
030103: RNCC: 5 | RNVC: 2

8 Apr 1998

5340-33-203-3067
Access Cover

332033067
CP-30-P-019: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-33-001-9639
Mounting Bracket

330019639
35-25984-0102A02: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-188-7509
Loop Clamp

331887509
000.925.14.00: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-001-0622
Mounting Bracket

330010622
35-46272-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-106-8869
Mounting Bracket

331068869
7356.252.0695: RNCC: 3 | RNVC: 2
2510011177: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-205-4440
Access Cover

332054440
418 016: RNCC: 3 | RNVC: 2

2 Oct 2006

5340-33-107-4478
Mounting Bracket

331074478
W280677501001: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-211-1473
Mounting Bracket

332111473
VR07202000: RNCC: 3 | RNVC: 2
VR07202000: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-33-202-9323
Mending Plate

332029323
CBD50512P88: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-204-2669
Snap Hook

332042669
27494401: RNCC: 3 | RNVC: 2

3 Jun 2005

5340-33-116-3840
Mechanical Stop

331163840
NM-4611: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2144
Mending Plate

331082144
9644.100.0106: RNCC: 3 | RNVC: 2
1005005315: RNCC: 5 | RNVC: 2
1005005315: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-001-0924
Mounting Bracket

330010924
35-46633-1102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1908
Bumper

330011908
35-65145-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-205-8533
Bail Handle

332058533
BVS-80-17021: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-103-0894
Access Cover

331030894
411.090.9060: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-0293
Stand Base

332020293
1025-901755: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-202-4976
Angle Bracket

332024976
MHC2120500: RNCC: 3 | RNVC: 2
MHC1120500: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-33-181-0956
Metal Grille

331810956
-76817-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-7732
Angle Bracket

331577732
578912: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-4084
Mounting Bracket

331614084
739091: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-1755
Loop Clamp

331071755
4730000427: RNCC: 3 | RNVC: 2
DIN 3016 D1 4X15 W1 2: RNCC: 4 | RNVC: 1

26 Apr 2000

5340-33-200-6911
Sliding Block

332006911
17520062: RNCC: 3 | RNVC: 2

25 Feb 2002

5340-33-200-7740
Mounting Bracket

332007740
9644.250.6860: RNCC: 3 | RNVC: 2
2540000273: RNCC: 5 | RNVC: 2

11 Mar 2002

5340-33-107-2870
Access Cover

331072870
122573: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-33-200-9701
Mounting Plate

332009701
2310900304: RNCC: 3 | RNVC: 2
2310900304: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-1940
Mounting Bracket

330011940
35-66144-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0462
Mounting Bracket

330010462
35-46126-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-004-7794
Mounting Plate

330047794
-0941040: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-001-4848
Bumper

330014848
92027412: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-154-6460
Angle Bracket

331546460
313556: RNCC: 3 | RNVC: 2
313556: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-001-1232
Rod End Clevis

330011232
35-49931-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-9722
Mounting Plate

332009722
2510007865: RNCC: 3 | RNVC: 2
2510007865: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-204-6027
Rim Lock Set

332046027
TDBM/PLA: RNCC: 3 | RNVC: 2

28 Oct 2005

5340-33-211-5021
Angle Bracket

332115021
J00860101-002: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-106-3175
Angle Bracket

331063175
RAL-200-2-12-5: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-107-9029
Mounting Bracket

331079029
1-KPB-004000: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-201-4281
Mounting Bracket

332014281
1025-900773: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-106-4327
Turnbuckle

331064327
RAL-200-10-1: RNCC: 3 | RNVC: 2

29 Jan 1998

5340-33-204-1979
Access Door Hinge

332041979
PCAMI/RP/27A0502041: RNCC: 3 | RNVC: 2

9 May 2005

5340-33-107-6310
Angle Bracket

331076310
7060.252.0071: RNCC: 3 | RNVC: 2
2510700441: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-154-2187
Mounting Plate

331542187
510142: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-4936
Mounting Bracket

331544936
645376: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-153-9694
Door Handle

331539694
883806: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-107-9282
Mounting Bracket

331079282
7057.252.0330: RNCC: 3 | RNVC: 2
2510700171: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-108-2358
Mounting Bracket

331082358
0640.120.0390: RNCC: 3 | RNVC: 2
2510005138: RNCC: 5 | RNVC: 2
2510005138: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-103-1749
Mechanical Stop

331031749
1005-004347: RNCC: 3 | RNVC: 2
2106: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-202-3164
Angle Bracket

332023164
A2811747-001: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-33-204-9217
Mounting Bracket

332049217
1025901729: RNCC: 3 | RNVC: 2
9742.100.0100: RNCC: 5 | RNVC: 2

22 Feb 2006

5340-33-201-8193
Catch Strike

332018193
2510901306: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-108-0211
Mounting Bracket

331080211
9644.251.8350: RNCC: 3 | RNVC: 2
2540900271: RNCC: 5 | RNVC: 2
2540900271: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-108-1360
Retaining Strap

331081360
145964: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-211-2011
Mechanical Stop

332112011
098120549: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-200-9806
Mounting Plate

332009806
2510008830: RNCC: 3 | RNVC: 2
2510008830: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-104-7484
Leather Strap

331047484
101664: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6210
Mounting Bracket

332026210
9673.100.0140: RNCC: 3 | RNVC: 2
1005900298: RNCC: 5 | RNVC: 2
1005900298: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-104-1297
Bridge Clamp

331041297
W290622602100: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-33-155-7539
Mending Plate

331557539
737301: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-6461
Angle Bracket

331546461
315357: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-108-4378
Mounting Plate

331084378
9644.251.9370: RNCC: 3 | RNVC: 2
2510901173: RNCC: 5 | RNVC: 2
2510901173: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-0090
Mounting Bracket

330010090
35-34052-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-1324
Rim Lock Set

331071324
61060280200: RNCC: 3 | RNVC: 2
PCAMI/RP/0306028020: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-106-1416
Support Hook

331061416
012GLPD024: RNCC: 3 | RNVC: 2
PCAMI/RP/36C0100109: RNCC: 4 | RNVC: 1
CTI/CPT0039B/97 GANCHO PLASTICO: RNCC: 4 | RNVC: 1
028GPLD024: RNCC: 5 | RNVC: 2
GANCHO PLASTICO DOBLE TECHO TAM: RNCC: 6 | RNVC: 9
PCAMI/TG/CP/05530002: RNCC: 6 | RNVC: 9

7 Apr 1997

5340-33-202-1997
Retaining Strap

332021997
7055.252.0068: RNCC: 3 | RNVC: 2
2510701616: RNCC: 5 | RNVC: 2

24 Feb 2003

5340-33-103-1625
Rod End Clevis

331031625
1005-004386: RNCC: 3 | RNVC: 2
2527: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-200-1403
Mounting Bracket

332001403
9644.810.0520: RNCC: 3 | RNVC: 2
2510007967: RNCC: 5 | RNVC: 2
2510007967: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-33-200-1661
Mounting Plate

332001661
28110601: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-204-4166
Access Cover

332044166
W280698422002: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-205-0648
Angle Bracket

332050648
0225184: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-33-201-0195
Mounting Plate

332010195
2910900095: RNCC: 3 | RNVC: 2
2910900095: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-154-0673
Door Holder

331540673
571195: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-0468
Mounting Bracket

330010468
35-46136-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-003-4288
Mounting Plate

330034288
159-267: RNCC: 3 | RNVC: 2
SP159-267: RNCC: 5 | RNVC: 1

5 Sep 1997

5340-33-107-0444
Stand Base

331070444
3001033: RNCC: 3 | RNVC: 2
PCAMI/RP/1403001033: RNCC: 6 | RNVC: 9

26 May 1999

5340-33-107-0270
Loop Clamp

331070270
11785051: RNCC: 3 | RNVC: 2
PCAMI/RP/0211785051: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-155-7710
Angle Bracket

331557710
754051: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-0763
Mounting Bracket

331080763
9644.250.6870: RNCC: 3 | RNVC: 2
2540000787: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-190-5491
Access Cover

331905491
43176653-004: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-6147
Angle Bracket

331166147
15 A-31: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-2289
Angle Bracket

331042289
230060: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-6453
Mending Plate

332016453
1025-901745: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-154-0660
Access Cover

331540660
646418: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-211-5098
Retaining Strap

332115098
0602067: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-203-2719
Mounting Bracket

332032719
9673.250.7840: RNCC: 3 | RNVC: 2
2540901118: RNCC: 5 | RNVC: 2
2540901118: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-208-5764
Utility Resilient Mount

332085764
070-514: RNCC: 3 | RNVC: 2

6 Oct 2010

5340-33-157-8545
Angle Bracket

331578545
783569: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-6451
Mounting Bracket

331606451
75.515.134: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6667
Access Cover

331546667
632754: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-200-8909
Mounting Plate

332008909
W290698605100: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-103-1627
Rod End Clevis

331031627
471-090-0004: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4086
Loop Clamp

332004086
Q 314 176 113: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-001-0904
Mounting Bracket

330010904
35-46624-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-7940
Expansion Plug

331077940
61.11.134: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-211-0011
Plug Button

332110011
SK019.297.96: RNCC: 3 | RNVC: 2

10 May 2013

5340-33-154-5362
Expansion Plug

331545362
174903: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-103-5301
Access Cover

331035301
9505-1-3-05: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-200-9183
Loop Clamp

332009183
7,8/8,3 201602-2: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-108-4284
Handwheel

331084284
9644.121.0038: RNCC: 3 | RNVC: 2
2510010329: RNCC: 5 | RNVC: 2
2510010329: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-3866
Access Cover

332003866
CF 228 499 AR: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-203-2726
Mounting Bracket

332032726
9673.250.8630: RNCC: 3 | RNVC: 2
2540901545: RNCC: 5 | RNVC: 2
2540901545: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-002-2757
Handle Grip

330022757
1055-000817: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-33-116-3892
Mounting Bracket

331163892
BW-74: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-0789
Utility Resilient Mount

332080789
135251: RNCC: 3 | RNVC: 2
BRB70-40SH-M12: RNCC: 5 | RNVC: 2

11 Feb 2010

5340-33-108-4225
Access Cover

331084225
0639.250.4230: RNCC: 3 | RNVC: 2
2510007473: RNCC: 5 | RNVC: 2
2510007473: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-114-5112
Support Hook

331145112
6 ILA 1-72: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-155-6400
Angle Bracket

331556400
754944: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-4096
Angle Bracket

332014096
A2811610-401: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-202-6482
Access Cover

332026482
9673.120.0290: RNCC: 3 | RNVC: 2
2510900615: RNCC: 5 | RNVC: 2
2510900615: RNCC: 5 | RNVC: 2

22 Sep 2003

5340-33-107-9972
Mounting Bracket

331079972
9644.250.2380: RNCC: 3 | RNVC: 2
1005006148: RNCC: 5 | RNVC: 2
1005006148: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-204-1398
Mounting Bracket

332041398
064.19.02: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-33-116-7116
Access Cover

331167116
105.728.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-3918
Lock Spindle

331083918
8793 193-001: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-211-4065
Angle Bracket

332114065
62021104: RNCC: 3 | RNVC: 2

21 Oct 2013

5340-33-202-6965
Mounting Bracket

332026965
9644.251.3290: RNCC: 3 | RNVC: 2
2540901061: RNCC: 5 | RNVC: 2
2540901061: RNCC: 5 | RNVC: 2

26 Sep 2003

5340-33-003-4179
Access Cover

330034179
11.28951-2629-SE: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-106-8749
Mending Plate

331068749
7356.611.0001: RNCC: 3 | RNVC: 2
2510007672: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-004-5584
Angle Bracket

330045584
NN60066P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-004-5213
Access Cover

330045213
24323-G9825: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-181-1149
Retaining Strap

331811149
-16688-37501: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-4015
Webbing Strap

331024015
MB51-8-10: RNCC: 3 | RNVC: 2
MB51-8-10: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6400
Mounting Bracket

332046400
0850423000000: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-206-6749
Utility Resilient Mount

332066749
137061: RNCC: 3 | RNVC: 2
M18091: RNCC: 5 | RNVC: 2
CONE TYPE 31 60SH: RNCC: 5 | RNVC: 2
0042165: RNCC: 5 | RNVC: 2

18 Apr 2008

5340-33-211-0227
Utility Access Door

332110227
W290635304100: RNCC: 3 | RNVC: 2

28 May 2013

5340-33-001-0581
Angle Bracket

330010581
35-46257-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-7177
Retaining Strap

332007177
MAM-U-06-01-02: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-33-188-9827
Rod End Clevis

331889827
3 170 192: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-211-0892
Leather Strap

332110892
212-81259-1: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-33-153-9674
Door Handle

331539674
586369: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-190-3948
Runner

331903948
1330-700: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-6969
Mounting Bracket

331086969
7058.252.0050: RNCC: 3 | RNVC: 2
2510701108: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-204-0811
Webbing Strap

332040811
02512453: RNCC: 3 | RNVC: 2
532533M267411: RNCC: 6 | RNVC: 9
532533M267410: RNCC: 6 | RNVC: 9

10 Mar 2005

5340-33-160-3809
Retaining Strap

331603809
79.03.085.034: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2071
Vent Plug

332012071
TAPONJ201-MAM-1: RNCC: 3 | RNVC: 2

4 Jun 2002

5340-33-115-9270
Mounting Plate

331159270
01.00765/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-1620
Retaining Strap

331061620
8-791-034-029: RNCC: 3 | RNVC: 2

20 May 1997

5340-33-200-3655
Access Cover

332003655
C 6623 235: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-201-6029
Mounting Plate

332016029
9644.120.0168: RNCC: 3 | RNVC: 2
2510010912: RNCC: 5 | RNVC: 2
2510010912: RNCC: 5 | RNVC: 2

5 Sep 2002

5340-33-003-7072
Loop Clamp

330037072
5975000042: RNCC: 3 | RNVC: 2
4122400266: RNCC: 3 | RNVC: 2
5975000042: RNCC: 3 | RNVC: 2
4122400266: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-202-5898
Angle Bracket

332025898
738359: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-33-107-4678
Retaining Strap

331074678
322942: RNCC: 3 | RNVC: 2
322942: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-202-6909
Mounting Bracket

332026909
9673.290.5440: RNCC: 3 | RNVC: 2
2910900150: RNCC: 5 | RNVC: 2
2910900150: RNCC: 5 | RNVC: 2

26 Sep 2003

5340-33-108-4463
Retaining Strap

331084463
9644.251.6720: RNCC: 3 | RNVC: 2
2540001391: RNCC: 5 | RNVC: 2
2540001391: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-116-0535
Access Cover

331160535
13215100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3670
Expansion Plug

331603670
401.368: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-158-8950
Loop Clamp

331588950
D-8144: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5909
Mounting Plate

331455909
094176: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9859
Mounting Plate

332009859
2510900191: RNCC: 3 | RNVC: 2
2510900191: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-102-0219
Rod End Clevis

331020219
2510-000408: RNCC: 3 | RNVC: 2
2510000408: RNCC: 5 | RNVC: 2
411.090.0589: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-107-8891
Pipe Hanger

331078891
120969: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-001-2769
Loop Clamp

330012769
CAN67282D4: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-155-7740
Angle Bracket

331557740
579915: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-9969
Mounting Bracket

330009969
35-23374-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-4977
Access Cover

331034977
1005-003709: RNCC: 3 | RNVC: 2

14 Jun 1994

5340-33-160-3768
Plug Button

331603768
97.500.970: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8271
Mounting Bracket

332008271
7061.252.0090: RNCC: 3 | RNVC: 2
2510700446: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-160-3814
Mounting Plate

331603814
91.500.870: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-2754
Detent Plunger

330022754
1055-000940: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-33-201-4243
Angle Bracket

332014243
A2810545-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-105-9595
Mending Plate

331059595
A52-01-02: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-200-1879
Retaining Band

332001879
J57461720-001: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-33-107-2584
Strap Fastener Loop

331072584
W280675600212: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-108-4517
Cushioning Pad

331084517
9644.251.6494: RNCC: 3 | RNVC: 2
2590900114: RNCC: 5 | RNVC: 2
2590900114: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-203-5525
Utility Access Door

332035525
80060019: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-209-4903
Utility Guard Rail Section

332094903
0663.20.3005.00: RNCC: 3 | RNVC: 2

2 Jan 2012

5340-33-115-8155
Access Cover

331158155
10205001570: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-001-2601
Elastic Strap

330012601
CAN510198400: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-003-2910
Angle Bracket

330032910
721023727: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-004-5281
Locking Stay

330045281
052098: RNCC: 3 | RNVC: 2
-52098: RNCC: 5 | RNVC: 2

14 Jun 1999

5340-33-206-1409
Shelf Bracket

332061409
INTA080000: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-33-155-7474
Mending Plate

331557474
321606: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-160-5809
Mechanical Stop

331605809
95.605.961: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1645
Rod End Clevis

331161645
3 193 341: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5396
Detent Plunger

331065396
RAL-200-2-4-4: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-33-204-4853
Access Cover

332044853
204700108: RNCC: 3 | RNVC: 2
204700108: RNCC: 5 | RNVC: 2
4320-33-M23-9557: RNCC: 6 | RNVC: 9
9999-33-R29-4056: RNCC: 6 | RNVC: 9

21 Sep 2005

5340-33-102-2652
Runner

331022652
1005-002832: RNCC: 3 | RNVC: 2
WK-KW 9035.0407: RNCC: 5 | RNVC: 2

1 Mar 1991

5340-33-155-2443
Access Cover

331552443
HB-97007.01: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-103-1467
Access Cover

331031467
1005-004348: RNCC: 3 | RNVC: 2
2108: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-200-8038
Mounting Bracket

332008038
1005.002688: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-201-6304
Bumper

332016304
D0942510858: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-33-000-6703
Retaining Strap

330006703
698042: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-205-6788
Flush Catch Claw

332056788
42900512000: RNCC: 3 | RNVC: 2

20 Feb 2007

5340-33-158-1066
Access Cover

331581066
521089: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-8975
Mending Plate

331558975
313416: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-001-4361
Angle Bracket

330014361
92026224: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-155-7493
Mending Plate

331557493
575964: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-3261
Vent Plug

331613261
529560: RNCC: 3 | RNVC: 2
411.023: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-154-0396
Synchro Clamp

331540396
573091: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-106-9411
Mounting Plate

331069411
7356.592.0240: RNCC: 3 | RNVC: 2
2510008870: RNCC: 5 | RNVC: 2

7 Apr 1999

5340-33-001-8378
Expansion Shield

330018378
20050-573E: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-211-2807
Mounting Plate

332112807
1270000059: RNCC: 3 | RNVC: 2

7 Aug 2013

5340-33-108-5636
Lock Bolt

331085636
9644.251.6170: RNCC: 3 | RNVC: 2
5340001724: RNCC: 5 | RNVC: 2
5340001724: RNCC: 5 | RNVC: 2

27 Apr 2001

5340-33-126-1326
Access Cover

331261326
3790-26: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-106-0510
Metal Grille

331060510
H11930/2/17: RNCC: 3 | RNVC: 2

13 Dec 1996

5340-33-158-5706
Synchro Clamp

331585706
-04200286-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-1648
Angle Bracket

331611648
2510-003961: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-001-8343
Expansion Shield

330018343
20050-571C: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-203-1788
Handle Grip

332031788
9673.250.5321: RNCC: 3 | RNVC: 2
2540900696: RNCC: 5 | RNVC: 2
2540900696: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-003-4317
Mounting Bracket

330034317
159-823: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-154-5519
Retaining Strap

331545519
319479: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-161-3112
Mounting Bracket

331613112
515607: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-2226
Mending Plate

331542226
575954: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-202-4951
Mounting Plate

332024951
222421761-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-202-9862
Mounting Bracket

332029862
223551805-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-204-6888
Flush Catch

332046888
PS-902279: RNCC: 3 | RNVC: 2

7 Dec 2005

5340-33-201-4760
Utility Access Door

332014760
A2810489-403: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-153-9686
Door Handle

331539686
804756: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-108-0017
Mounting Bracket

331080017
9644.250.6172: RNCC: 3 | RNVC: 2
2540001081: RNCC: 5 | RNVC: 2
2540001081: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-154-2252
Mending Plate

331542252
769635: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-153-8086
Runner

331538086
193204: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-33-000-7766
Handwheel

330007766
423201007600000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-202-0582
Friction Catch Stud

332020582
1025-901508: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-189-1667
Turnbuckle

331891667
6122006: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-4620
Bow Handle

331564620
-73940-03C00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3995
Angle Bracket

332013995
A2811305-401: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-126-4202
Angle Bracket

331264202
C22136-N1000-C338: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-001-9635
Mounting Bracket

330019635
35-22983-0101A01: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-203-7138
Mounting Plate

332037138
33206-94511-0201: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-33-107-2369
Bumper

331072369
-01902107-0: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-200-3859
Mounting Plate

332003859
CF 218 126 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-181-6319
Mounting Plate

331816319
-01700273-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-1222
T Bracket

332001222
323966: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-205-4016
Mounting Plate

332054016
5039890: RNCC: 3 | RNVC: 2
1.143.60.929: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-114-4848
Access Cover

331144848
10 ILA 8-45: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-002-0644
Mounting Plate

330020644
GR F3: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-200-7687
Access Cover

332007687
J92561395-001: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-33-005-1322
Mounting Plate

330051322
332A22-1459-20-MAM-1: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-33-001-8026
Access Cover

330018026
35-22821-0002-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-202-7983
Rigid Caster

332027983
14-29-125L: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-33-204-6833
Mounting Plate

332046833
PS-510016: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-33-000-0457
Angle Bracket

330000457
H350GS/D098: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-002-1607
Mounting Plate

330021607
921.331.03: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-004-7741
Loop Clamp

330047741
-06605086-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-116-1588
Mounting Bracket

331161588
3 106 443: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-3587
Mounting Plate

331063587
566006: RNCC: 3 | RNVC: 2

3 Oct 1997

5340-33-000-6718
Retaining Strap

330006718
801469: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-154-4164
Loop Clamp

331544164
3090224449: RNCC: 3 | RNVC: 2
3090224449: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-204-5264
Angle Bracket

332045264
6.302.0.982.002.4: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-33-189-1777
Access Cover

331891777
02100040: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-7324
Access Cover

332057324
1.120.34.11.001: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-33-002-5201
Access Cover

330025201
212-51107-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-116-5647
Bridge Clamp

331165647
31512-ZE2-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-8100
Friction Catch Stud

330038100
730091604: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-33-202-6781
Mounting Bracket

332026781
9673.590.5084: RNCC: 3 | RNVC: 2
2510903203: RNCC: 5 | RNVC: 2
2510903203: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-156-2757
Pipe Hanger

331562757
-20627-G9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6765
Mounting Bracket

330036765
312030: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-201-6118
Mending Plate

332016118
319813: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-33-145-5910
Mounting Plate

331455910
094144: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7544
Mending Plate

331557544
738428: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-104-1348
Angle Bracket

331041348
615 151 06 41: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-8698
Bow Handle

330008698
T-057045-31: RNCC: 3 | RNVC: 2

10 Feb 1989

5340-33-200-4444
Access Cover

332004444
WW 321 604 -R: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-201-3863
Access Cover

332013863
223581419-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-107-9997
Mounting Bracket

331079997
0639.250.0439: RNCC: 3 | RNVC: 2
2540000616: RNCC: 5 | RNVC: 2
2540000616: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-001-6362
Access Cover

330016362
35-53314-0003: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-126-4213
Angle Bracket

331264213
C22234-N1000-C15: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-000-6313
Loop Clamp

330006313
787330: RNCC: 1 | RNVC: 2

14 Jun 1988

5340-33-202-9980
Mending Plate

332029980
MHC113510: RNCC: 3 | RNVC: 2

19 Dec 2003

5340-33-202-6778
Access Cover

332026778
9673.250.0448: RNCC: 3 | RNVC: 2
2510902738: RNCC: 5 | RNVC: 2
2510902738: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-155-7749
Angle Bracket

331557749
2520000269: RNCC: 3 | RNVC: 2
318560: RNCC: 3 | RNVC: 2
318560: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-0244
Butt Hinge

331540244
136761: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-201-5859
Loop Clamp

332015859
631 492 02 40: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-200-4485
Access Cover

332004485
WW 386 395 AR: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-004-7793
Mounting Plate

330047793
-0941039: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-004-8200
Mounting Bracket

330048200
NN54647P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-204-5583
Flush Catch

332045583
H2466 - 1- . 125 - . 270: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-33-000-0992
Detent Plunger

330000992
C11568/043: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-206-2429
Bridge Clamp

332062429
227358020-01: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-33-103-1623
Rod End Connector

331031623
1005-004237: RNCC: 3 | RNVC: 2
1226: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-201-3996
Angle Bracket

332013996
A2811311-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-004-1916
Access Cover

330041916
730092715: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-153-9678
Door Handle

331539678
631982: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-153-9680
Door Handle

331539680
731180: RNCC: 3 | RNVC: 2
15100097: RNCC: 5 | RNVC: 9

4 Jan 1990

5340-33-154-0678
Door Holder

331540678
807592: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-126-2583
Angle Bracket

331262583
8506.005: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1634
Access Cover

332021634
723561722-02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-003-7822
Mounting Bracket

330037822
1055-001496: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-33-201-4215
Angle Bracket

332014215
A2811852-001: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-33-107-0088
Mounting Bracket

331070088
228-107: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000548: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-201-8911
Webbing Strap

332018911
INS0470/0052: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-105-5691
Turnbuckle

331055691
739176: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-204-6201
Loop Clamp

332046201
09407-12404: RNCC: 3 | RNVC: 2
09407-12404: RNCC: 5 | RNVC: 2

7 Nov 2005

5340-33-201-9842
Mounting Plate

332019842
223591320-02: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-201-9534
Access Cover

332019534
223591119-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-202-6540
Mounting Bracket

332026540
723551391-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-200-2923
Angle Bracket

332002923
723571306-01: RNCC: 3 | RNVC: 2
723571306-01: RNCC: 5 | RNVC: 2

27 Nov 2001

5340-33-000-9867
Lock-Release Lever

330009867
35-22070-2601: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-4947
Mounting Plate

332024947
722421780-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-200-3002
Pawl Fastener

332003002
35-94243-0009: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-33-001-2129
Loop Clamp

330012129
35-71402-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0771
Mounting Bracket

330010771
35-46376-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-0465
Access Cover

332060465
M18-A4000-0501: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-33-005-3997
Mounting Bracket

330053997
SG-020-106: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-201-2192
Utility Access Door

332012192
A2810590-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-102-0993
Shimmy Damper

331020993
9236-068: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6545
Access Cover

332026545
223551398-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-201-4079
Access Cover

332014079
222433520-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-116-3886
Hinge Torsion Bar

331163886
GP-28-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1389
Mounting Bracket

330011389
35-54201-0601: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-145-6103
Retaining Clip

331456103
TAB. C6-16: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4617
Angle Bracket

332014617
J29165200-402: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-204-6123
Utility Access Door

332046123
PS-701018: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-33-200-0261
Mechanical Stop

332000261
J29169054-001: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-201-4078
Access Cover

332014078
222433513-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-003-4051
Retaining Strap

330034051
11.28974-0086: RNCC: 3 | RNVC: 2
11.28974-0086: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-201-4069
Angle Bracket

332014069
A2810561-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-106-3236
Caster Frame

331063236
REM-50-2-8-6: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-202-9856
Access Cover

332029856
723553714-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-9515
Mounting Plate

332019515
223591311-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-000-9974
Mounting Bracket

330009974
35-23404-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-0065
Access Cover

331020065
2510-000008: RNCC: 3 | RNVC: 2
2510000008: RNCC: 5 | RNVC: 2
411.097.0092: RNCC: 5 | RNVC: 2

7 Aug 1992

5340-33-203-2870
Swivel Caster

332032870
FPG4 100 ACB5: RNCC: 3 | RNVC: 2
2-1190: RNCC: 5 | RNVC: 2

20 Feb 2004

5340-33-004-6405
Door Closer

330046405
01605071-0: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-116-5521
Access Cover

331165521
21510-883-621: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3582
Lock-Release Lever

332053582
1.120.34.05.002: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-33-210-8715
Cushioning Pad

332108715
PCAMI/AC/ACTO42A/12/6: RNCC: 3 | RNVC: 2
USP-HK-6: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-33-203-5873
Mounting Bracket

332035873
021.40.20.24: RNCC: 3 | RNVC: 2

2 Jun 2004

5340-33-107-4681
Stand Base

331074681
7356.252.4320: RNCC: 3 | RNVC: 2
2510011274: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-001-2767
Loop Clamp

330012767
CAN67282D12M: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-5360
Pipe Hanger

332045360
35-46387-0005A01: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-001-1489
Mounting Bracket

330011489
35-56140-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-202-5243
Access Cover

332025243
MHC2120200: RNCC: 3 | RNVC: 2
MHC1120200: RNCC: 5 | RNVC: 2

1 Aug 2003

5340-33-161-7019
Padlock

331617019
300/15: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-107-0113
Mechanical Stop

331070113
250-18: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000552: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-206-2177
Rod End Clevis

332062177
2403-0504.05: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-33-200-1965
Retaining Band

332001965
J57166521-001: RNCC: 3 | RNVC: 2

2 Nov 2001

5340-33-160-3666
Vent Plug

331603666
TO-3456: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1360
Retaining Strap

331161360
BA-14248000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9846
Access Cover

332019846
223591325-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-145-5899
Loop Clamp

331455899
TAB. H1-43: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4829
Access Cover

332014829
MAM-HE-09-05-02: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-33-116-5524
Access Cover

331165524
21621-883-741: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0139
Rod End Clevis

330010139
35-42328-0501: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-3445
Access Cover

332053445
CGD-11101103-01: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-33-200-4594
Mechanical Stop

332004594
WW 488 167 -X: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-001-0106
Mounting Bracket

330010106
35-34184-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-1575
Mounting Bracket

331031575
1005-004280: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4159
Mounting Bracket

330034159
F11-43286-0195: RNCC: 3 | RNVC: 2
F11.43286-0195: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-205-7787
Surface Bolt

332057787
A901611-004: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-33-001-6622
Access Cover

330016622
35-11468-0001: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-202-9059
Mounting Plate

332029059
723551734-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-107-9495
Loop Clamp

331079495
SP05600-15: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-154-2248
Mending Plate

331542248
766571: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-201-3800
Mounting Bracket

332013800
EMAC054000: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-33-211-2584
Swivel Caster

332112584
4-0709: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-33-116-8173
Mounting Plate

331168173
SA-C-562: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9789
Mounting Plate

332029789
222411497-01: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-33-102-2465
Mounting Bracket

331022465
1005-001825: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-200-1554
Pipe Hanger

332001554
95-46385-0002A02: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-33-126-9069
Access Cover

331269069
20229960-1: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-200-4091
Retaining Strap

332004091
Q 314 177 126: RNCC: 3 | RNVC: 2

22 Jan 2002

Load More Results