What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 15 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 15 of 39

5340-33-205-0541
Mounting Bracket

332050541
0405747: RNCC: 3 | RNVC: 2

18 Apr 2006

5340-33-203-2099
Bridge Clamp

332032099
2540901601: RNCC: 3 | RNVC: 2
2540901601: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-000-2927
Detent Plunger

330002927
311364: RNCC: 1 | RNVC: 2
311364: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-003-4316
Mounting Bracket

330034316
159-822: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-106-4007
Mending Plate

331064007
-33173-C6200: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-154-4155
Loop Clamp

331544155
3090214449: RNCC: 3 | RNVC: 2
3090214449: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-106-5800
Pad Eye

331065800
1399094: RNCC: 3 | RNVC: 2
1399094: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-157-7317
Angle Bracket

331577317
320671: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-157-8553
Angle Bracket

331578553
785156: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4229
Access Cover

332044229
W280698401511: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-155-7529
Mending Plate

331557529
753774: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-9514
Access Cover

332039514
20880758: RNCC: 3 | RNVC: 2
33R277117: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-204-0408
Access Cover

332040408
X211473002: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-33-203-9535
Blank Panel

332039535
055-13.01.01.M01: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-33-155-7475
Mending Plate

331557475
313123: RNCC: 3 | RNVC: 2
313123: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-6783
Mending Plate

332026783
9644.250.5882: RNCC: 3 | RNVC: 2
2540001006: RNCC: 5 | RNVC: 2
2540001006: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-205-6312
Loop Clamp

332056312
1025900171: RNCC: 3 | RNVC: 2
9682.101.0823: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-33-108-4218
Access Cover

331084218
0639.590.1014: RNCC: 3 | RNVC: 2
2510004891: RNCC: 5 | RNVC: 2
2510004891: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-003-1972
Retaining Strap

330031972
221601204: RNCC: 3 | RNVC: 2

12 Oct 1996

5340-33-160-7485
Retaining Clip

331607485
75.518.406: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-9026
Mounting Bracket

331079026
1-KPB-001000: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-201-9874
Angle Bracket

332019874
1025-901696: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-004-2046
Mounting Bracket

330042046
311423: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-005-3688
Angle Bracket

330053688
2510700125: RNCC: 3 | RNVC: 2
7053.252.0125: RNCC: 5 | RNVC: 2

16 Jul 2001

5340-33-107-7447
Mounting Bracket

331077447
W290684033000: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-002-9142
Retaining Strap

330029142
3779977790: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-106-8877
Mounting Bracket

331068877
584731: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-204-2978
Mounting Bracket

332042978
785170: RNCC: 3 | RNVC: 2

24 Jun 2005

5340-33-108-0678
Angle Bracket

331080678
7053.252.0270: RNCC: 3 | RNVC: 2
2510700053: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-155-7722
Angle Bracket

331557722
750078: RNCC: 3 | RNVC: 2
750078: RNCC: 6 | RNVC: 9

18 Oct 1990

5340-33-154-7179
Bow Handle

331547179
312971: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-206-4159
Angle Bracket

332064159
00280906: RNCC: 3 | RNVC: 2

28 Dec 2007

5340-33-206-3077
Access Cover

332063077
185079: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-33-205-2429
Stand Base

332052429
CBD56501G16: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-160-6493
Bow Handle

331606493
95.517.653: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-4151
Mounting Bracket

332044151
W280698446201: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-155-0598
Mounting Bracket

331550598
97.504.523.80: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-203-5232
Access Cover

332035232
999006208: RNCC: 3 | RNVC: 2
999006208: RNCC: 5 | RNVC: 2

7 May 2004

5340-33-200-6049
Access Cover

332006049
D510A.04: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-004-9732
Retaining Clip

330049732
3073: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-33-157-1996
Rod End Clevis

331571996
-06300153-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4006
Angle Bracket

332014006
A2810464-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-002-9530
Door Closer

330029530
6317200316: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-103-3939
Access Cover

331033939
544924.95: RNCC: 3 | RNVC: 2
544924.95: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-001-3813
Strap Fastener Loop

330013813
92020147: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-8456
Access Cover

331578456
754200: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-0158
Access Cover

332000158
CBD50527K01: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-33-001-3271
Compression Cup

330013271
92012108: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-000-7514
Angle Bracket

330007514
781669: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-200-3623
Clamp Bolt Assembly

332003623
316450: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-33-116-7274
Mechanical Stop

331167274
1420243: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-8177
Cushioning Pad

332018177
1005005943: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-160-3870
Lock-Release Lever

331603870
95.609.907: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2353
Angle Bracket

331562353
-90570-C8200: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-204-6737
Support Hook

332046737
AGB115025C3I: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-33-188-9471
Bow Handle

331889471
1720040: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-157-7637
Angle Bracket

331577637
562625: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-107-2613
Access Cover

331072613
23184514000: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-155-9014
Access Cover

331559014
316222: RNCC: 3 | RNVC: 2
316222: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-202-3605
Spring Tension Clip

332023605
17890474: RNCC: 3 | RNVC: 2

22 Apr 2003

5340-33-157-9454
Mending Plate

331579454
751459: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-4332
Access Cover

331584332
542193: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6509
Loop Clamp

331546509
3090221011: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-108-2162
Access Cover

331082162
9644.100.0790: RNCC: 3 | RNVC: 2
1005005494: RNCC: 5 | RNVC: 2
1005005494: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-001-4697
Mounting Bracket

330014697
92026713: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-000-6931
Loop Clamp

330006931
516794: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-104-6465
Lock-Release Lever

331046465
10.20.56.0104.0: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-204-8595
Access Cover

332048595
42404000090: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-203-6519
Mounting Bracket

332036519
9356.592.7240: RNCC: 3 | RNVC: 2
2510-904091: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-001-3413
Compression Cup

330013413
92014645: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-126-6194
Mounting Plate

331266194
PT17454: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-0593
Angle Bracket

330050593
NN58998P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-108-4219
Access Cover

331084219
0639.590.1012: RNCC: 3 | RNVC: 2
2510004892: RNCC: 5 | RNVC: 2
2510004892: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-0089
Mounting Bracket

331070089
228-111: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000549: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-116-5283
Retaining Strap

331165283
4305789: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8904
Mounting Bracket

332008904
W290698604300: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-202-9968
Angle Bracket

332029968
MHC2120930: RNCC: 3 | RNVC: 2
MHC1120930: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-206-2094
Mounting Bracket

332062094
6387430103: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-33-106-6013
Mounting Bracket

331066013
920661: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-105-9339
Turnbuckle

331059339
16480: RNCC: 3 | RNVC: 2

28 Aug 1996

5340-33-116-4493
Loop Clamp

331164493
10205002980: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-201-7893
Section Block Clamp

332017893
NN60509G01: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-107-9225
Access Cover

331079225
120018: RNCC: 3 | RNVC: 2

26 Sep 2000

5340-33-187-5536
Loop Clamp

331875536
0201409-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-3440
Angle Bracket

330033440
404094: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-001-4936
Expansion Plug

330014936
92027587: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-158-1050
Angle Bracket

331581050
517584: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-6996
Access Cover

332016996
9644.101.0104: RNCC: 3 | RNVC: 2
1005006572: RNCC: 5 | RNVC: 2
1005006572: RNCC: 5 | RNVC: 2

4 Oct 2002

5340-33-004-7905
Loop Clamp

330047905
1344864: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-33-161-2592
Mounting Bracket

331612592
2930000237: RNCC: 3 | RNVC: 2
317243: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-209-9482
Utility Resilient Mount

332099482
M18210: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-33-202-9957
Mounting Bracket

332029957
MHC2010400: RNCC: 3 | RNVC: 2

19 Dec 2003

5340-33-202-7796
Mounting Plate

332027796
76560099: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-200-3135
Mounting Bracket

332003135
28150301: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-33-106-8221
Mounting Bracket

331068221
W280675300306: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-181-8201
Mounting Plate

331818201
-0921246: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-158-4338
Access Cover

331584338
634601: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-1827
Mounting Bracket

331051827
194039: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-157-7604
Access Cover

331577604
555355: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-2474
Mounting Bracket

332052474
CBD56501P68: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-001-4296
Compression Cup

330014296
92026091: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-6489
Loop Clamp

331546489
3090201611: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-107-6168
Mounting Bracket

331076168
0639.250.9617: RNCC: 3 | RNVC: 2
2530000644: RNCC: 5 | RNVC: 2
2530000644: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-106-3999
Catch Strike

331063999
-83610-G9600: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-33-202-6629
Retaining Strap

332026629
9673.250.0303: RNCC: 3 | RNVC: 2
2510901094: RNCC: 5 | RNVC: 2
2510901094: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-107-4335
Mounting Plate

331074335
W290683139200: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-203-9189
Blank Panel

332039189
055-12.01: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-33-106-8195
Mending Plate

331068195
7356.252.0007: RNCC: 3 | RNVC: 2
2990000052: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-188-8573
Rod End Clevis

331888573
1070070: RNCC: 3 | RNVC: 2

18 Sep 1995

5340-33-107-6621
Mechanical Stop

331076621
-68643-S0100: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-205-5778
Mounting Bracket

332055778
CBD58504P44: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-155-8969
Angle Bracket

331558969
312927: RNCC: 3 | RNVC: 2
312927: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-001-4197
Expansion Plug

330014197
92023212: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-145-6363
Access Cover

331456363
71300046-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9350
Corner Brace

331159350
6.325.1.637.002.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-1849
Expansion Shield

331041849
N-8/10118: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-108-0227
Mounting Bracket

331080227
9644.251.8940: RNCC: 3 | RNVC: 2
2540900368: RNCC: 5 | RNVC: 2
2540900368: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-200-4290
Mounting Plate

332004290
7054.252.0032: RNCC: 3 | RNVC: 2
2540700041: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-202-9152
Lock-Release Lever

332029152
1025-901801: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-209-3153
Mounting Plate

332093153
INS003002050040000: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-33-103-5137
Mending Plate

331035137
1391: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-116-3169
Access Cover

331163169
6685.047: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-9522
Door Closer

330029522
6317200116: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-107-9966
Mounting Bracket

331079966
9644.250.0878: RNCC: 3 | RNVC: 2
1005006097: RNCC: 5 | RNVC: 2
1005006097: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-001-1935
Mounting Bracket

330011935
35-66112-0801: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-002-8418
Retaining Strap

330028418
SE127115138A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-154-0449
Expansion Plug

331540449
801302: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-003-6638
Rod End Clevis

330036638
1005002559: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-108-1813
Access Cover

331081813
7054.252.0420: RNCC: 3 | RNVC: 2
2510700876: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-108-5286
Lock Bolt

331085286
9644.100.0304: RNCC: 3 | RNVC: 2
1005002890: RNCC: 5 | RNVC: 2
1005002890: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-202-1368
Angle Bracket

332021368
5030848: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-161-2576
Mounting Plate

331612576
311864: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-200-9891
Mounting Bracket

332009891
2510900866: RNCC: 3 | RNVC: 2
2510900866: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-114-5047
Mounting Bracket

331145047
5TG 5-220: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-000-2882
Access Cover

330002882
646433: RNCC: 1 | RNVC: 2

22 May 1987

5340-33-204-6959
Stand Base

332046959
WW 186 108 BX: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-33-106-9985
Stand Base

331069985
PCAMI/RP/0700000717: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-105-7276
Bow Handle

331057276
-73940-08M10: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-209-7786
Utility Guard Rail Section

332097786
0664.20.7006.00: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-33-200-1649
Mounting Bracket

332001649
28110303: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-105-0611
Webbing Strap

331050611
PCT0022: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-201-4218
Angle Bracket

332014218
A2812114-401: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-202-6689
Mounting Plate

332026689
9673.250.0413: RNCC: 3 | RNVC: 2
1005900448: RNCC: 5 | RNVC: 2
1005900448: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-154-3836
Access Cover

331543836
770353: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-211-3326
Snap Hook

332113326
Q79020006060000: RNCC: 3 | RNVC: 2

23 Sep 2013

5340-33-188-4700
Mounting Plate

331884700
0940990: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-4951
Elastic Strap

331084951
99.08.54: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-108-4503
Strap Fastener Loop

331084503
9644.251.6409: RNCC: 3 | RNVC: 2
2590900074: RNCC: 5 | RNVC: 2
2590900074: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-154-0395
Synchro Clamp

331540395
528355: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-154-0205
Bow Handle

331540205
900060: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-107-8495
Mounting Bracket

331078495
-82610-9502: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-106-9288
Rod End Clevis

331069288
1958243: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-154-6082
Butt Hinge

331546082
320239: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-108-4228
Mounting Bracket

331084228
0639.590.3004: RNCC: 3 | RNVC: 2
2510007514: RNCC: 5 | RNVC: 2
2510007514: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-154-6551
Loop Clamp

331546551
750664: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-211-1836
Mounting Bracket

332111836
VR06020400: RNCC: 3 | RNVC: 2
VR06020400: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-154-6462
Angle Bracket

331546462
315900: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-108-5294
Angle Bracket

331085294
9644.100.0087: RNCC: 3 | RNVC: 2
1005005283: RNCC: 5 | RNVC: 2
1005005283: RNCC: 5 | RNVC: 2

27 Apr 2001

5340-33-000-9795
Handle Grip

330009795
35-21215-0402: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-6701
Utility Resilient Mount

332066701
137001: RNCC: 3 | RNVC: 2
CONE TYPE 10 45SH: RNCC: 5 | RNVC: 2
0042166: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-33-155-7506
Mending Plate

331557506
698765: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-7511
Mending Plate

331557511
751665: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-7452
Mending Plate

331557452
542459: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-7941
Angle Bracket

331577941
645132: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4741
Mounting Bracket

330014741
92026767: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-6568
Door Handle

331546568
736235: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-107-4462
Loop Clamp

331074462
W267000010004: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-202-3048
Rim Lock Set

332023048
27482012: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-33-154-5552
Retaining Strap

331545552
754632: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-155-6926
Blank Panel

331556926
757137: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-104-8044
Mounting Plate

331048044
755724: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-6083
Cushioning Pad

332016083
9330000226: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-33-001-3240
Angle Bracket

330013240
92011601: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-115-9257
Expansion Plug

331159257
01.00327/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-6711
Access Cover

330046711
721110515: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-33-211-6325
Loop Clamp

332116325
21108: RNCC: 3 | RNVC: 2

13 Dec 2013

5340-33-107-9362
Mounting Bracket

331079362
311955: RNCC: 3 | RNVC: 2

26 Sep 2000

5340-33-156-5028
Loop Clamp

331565028
-20565-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4191
Stand Base

332014191
02.11.50.CT: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-205-8527
Mounting Bracket

332058527
2555-401: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-004-7795
Mounting Plate

330047795
-0941041: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-201-6199
Cushioning Pad

332016199
2510901007: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-33-005-1577
Threaded Rod End

330051577
114317605: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-33-154-6943
Angle Bracket

331546943
752697: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-002-8449
Retaining Strap

330028449
SE128141539A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-205-8303
Mounting Bracket

332058303
99464914: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-105-9226
Mechanical Stop

331059226
250515: RNCC: 3 | RNVC: 2

12 Oct 1996

5340-33-203-9511
Access Cover

332039511
20880755: RNCC: 3 | RNVC: 2
33R277114: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-200-2722
Mounting Plate

332002722
100421000900: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-108-5382
Mechanical Stop

331085382
9644.251.6340: RNCC: 3 | RNVC: 2
2510010441: RNCC: 5 | RNVC: 2
2510010441: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-211-4662
Metal Grille

332114662
VR12010520: RNCC: 3 | RNVC: 2
VR12010520: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-126-3791
Retaining Strap

331263791
9.302.1.977.001.5: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-116-8638
Plain Solid Disk

331168638
2106/29: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-5302
Angle Bracket

332025302
MHC2120800: RNCC: 3 | RNVC: 2
MHC1120800: RNCC: 5 | RNVC: 2

4 Aug 2003

5340-33-200-8525
Access Cover

332008525
9644.250.5850: RNCC: 3 | RNVC: 2
2530000794: RNCC: 5 | RNVC: 2
2530000794: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-200-4306
Angle Bracket

332004306
7063.252.0073: RNCC: 3 | RNVC: 2
2540700079: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-154-6934
Angle Bracket

331546934
500006480: RNCC: 3 | RNVC: 2
731894: RNCC: 5 | RNVC: 9

3 Dec 1990

5340-33-201-0028
Access Cover

332010028
2510901809: RNCC: 3 | RNVC: 2
2510901809: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-201-2275
Doorstop

332012275
2735.33.10: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-202-6687
Mounting Plate

332026687
9673.250.0411: RNCC: 3 | RNVC: 2
1005900445: RNCC: 5 | RNVC: 2
1005900445: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-125-0478
Expansion Shield

331250478
TACO 12X50: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-33-108-0073
Mounting Plate

331080073
9644.251.6536: RNCC: 3 | RNVC: 2
2540900506: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-211-1521
Mounting Bracket

332111521
VR03401040: RNCC: 3 | RNVC: 2
VR03401040: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-108-2662
Mounting Bracket

331082662
9644.120.0680: RNCC: 3 | RNVC: 2
2510010895: RNCC: 5 | RNVC: 2
2510010895: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-189-2327
Metal Grille

331892327
01600100: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-108-0338
Retaining Strap

331080338
7356.252.1720: RNCC: 3 | RNVC: 2
2510700474: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-33-200-1173
Retaining Strap

332001173
7059.252.0098: RNCC: 3 | RNVC: 2
2510701134: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-202-7107
Mounting Bracket

332027107
9673.250.7250: RNCC: 3 | RNVC: 2
2540901090: RNCC: 5 | RNVC: 2
2540901090: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-160-5763
Mechanical Stop

331605763
78.42.332.000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0004
Mounting Bracket

331080004
0639.250.8030: RNCC: 3 | RNVC: 2
2540000638: RNCC: 5 | RNVC: 2
2540000638: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-209-3058
Mounting Bracket

332093058
606ME130000: RNCC: 3 | RNVC: 2

27 Sep 2011

5340-33-000-7495
Angle Bracket

330007495
695290: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-155-9185
Mounting Bracket

331559185
313159: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-155-9234
Mounting Bracket

331559234
583770: RNCC: 3 | RNVC: 2
583770: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-160-4317
Mending Plate

331604317
79.03.079.007: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-9598
Butt Hinge

330029598
6317430351: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-204-4329
Mounting Bracket

332044329
500005558: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-201-6355
Access Cover

332016355
723561722-01: RNCC: 3 | RNVC: 2

19 Sep 2002

5340-33-103-8651
Mending Plate

331038651
M6-87.24.2: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-107-0968
Loop Clamp

331070968
139799: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-205-4177
Webbing Strap

332054177
235394: RNCC: 3 | RNVC: 2

18 Sep 2006

5340-33-203-5521
Bow Handle

332035521
80060012: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-210-9510
Handwheel

332109510
VDSIMGR: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-33-180-5215
Loop Clamp

331805215
RTC0602: RNCC: 3 | RNVC: 2
RTC0602: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-160-3832
Mounting Plate

331603832
95.605.402: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-1358
Handle Grip

332011358
906 509: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-206-1849
Mechanical Stop

332061849
CBD58505P07: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-126-2339
Angle Bracket

331262339
H11930/2/18: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-0460
Access Cover

332020460
1025-900201: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-202-6213
Cushioning Pad

332026213
9673.250.0393: RNCC: 3 | RNVC: 2
1005900374: RNCC: 5 | RNVC: 2
1005900374: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-203-8474
Access Cover

332038474
248900235: RNCC: 3 | RNVC: 2
248900235: RNCC: 5 | RNVC: 2

1 Dec 2004

5340-33-000-0740
Eye Hook

330000740
2063700 OTAN: RNCC: 1 | RNVC: 2
17849: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-001-3220
Hinged Hasp

330013220
92011011: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-201-5673
Access Cover

332015673
126157: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-107-1948
Hinged Hasp

331071948
36883107: RNCC: 3 | RNVC: 2
-36883106: RNCC: 5 | RNVC: 2

6 Jul 1999

5340-33-102-5909
Friction Catch Stud

331025909
254-B: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3168
Access Cover

331163168
2650.008: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3749
Compression Cup

330013749
92019901: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-156-5047
Loop Clamp

331565047
-33159-C8000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-4823
Door Handle

331064823
2.880.441.0 - MEISA: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-155-5218
Access Cover

331555218
683100: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-002-8078
Door Handle

330028078
0004382204: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-160-3797
Retaining Strap

331603797
91.500.631: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8171
Mounting Plate

331168171
102.011.068: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3144
Vent Plug

332003144
28160103: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-33-204-6404
Detent Plunger

332046404
0850482030200: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-003-2909
Angle Bracket

330032909
721023722: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-108-1515
Mechanical Stop

331081515
00.29.02.02: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-33-209-3080
Mounting Plate

332093080
191442946: RNCC: 3 | RNVC: 2
191442946: RNCC: 5 | RNVC: 2

27 Sep 2011

5340-33-106-7483
Mechanical Stop

331067483
1005.002363: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-202-4940
Utility Resilient Mount

332024940
222422130-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-001-1327
Mounting Bracket

330011327
35-53161-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-3977
Caster Wheel

331073977
RE-25-2-5-1: RNCC: 3 | RNVC: 2
RE-50-2-8-1: RNCC: 5 | RNVC: 2
REM-25-2-5-1: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-203-8007
Mounting Bracket

332038007
S788020200: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-33-211-2993
Mounting Plate

332112993
5061542: RNCC: 3 | RNVC: 2
1.164.91.004: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-203-5193
Loop Clamp

332035193
GE12012010: RNCC: 3 | RNVC: 2

7 May 2004

5340-33-108-1711
Mounting Bracket

331081711
2510700961: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-190-3945
Runner

331903945
1200-500: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6719
Retaining Strap

330006719
804738: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-107-2469
Mounting Bracket

331072469
16334075: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-160-6499
Threaded Rod End

331606499
95.596.165: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-2886
Retaining Strap

330032886
721022902: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-203-3079
Angle Bracket

332033079
5035550: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-33-161-3395
Mechanical Stop

331613395
549233: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-3059
Angle Bracket

332003059
723571426-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-33-001-1219
Rod End Clevis

330011219
35-49200-0801: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-202-4943
Access Cover

332024943
722422854-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-116-8639
Retaining Strap

331168639
598/5123H2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-7134
Mounting Bracket

332037134
33206-94510-0101: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-33-188-8010
Strapping

331888010
KF-898: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-155-7741
Angle Bracket

331557741
311953: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-126-3233
Access Cover

331263233
6.302.0.986.006.5: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-107-8916
Bridge Clamp

331078916
SERIE STANDARD II 18,0: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-211-2997
Mounting Plate

332112997
5061546: RNCC: 3 | RNVC: 2
1.164.91.008: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-203-9482
Handwheel

332039482
20560047: RNCC: 3 | RNVC: 2
33R288278: RNCC: 5 | RNVC: 1

26 Jan 2005

5340-33-200-9766
Runner

332009766
2510008365: RNCC: 3 | RNVC: 2
2510008365: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-161-2959
Access Cover

331612959
194951: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-107-6743
Mounting Bracket

331076743
77 02 046 681: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-106-9393
Retaining Strap

331069393
4730002510: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-157-7318
Access Cover

331577318
320717: RNCC: 3 | RNVC: 2
320717: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-0589
Mounting Bracket

332020589
1025-900702: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-000-7014
Loop Clamp

330007014
838816: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-004-5216
Access Cover

330045216
1235522332: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-004-8245
Mounting Bracket

330048245
NN60441P12: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-155-7720
Angle Bracket

331557720
736841: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-9933
Mounting Bracket

332029933
223553710-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-9517
Access Cover

332019517
223591313-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-202-9068
Mounting Plate

332029068
223552716-01: RNCC: 3 | RNVC: 2
223552716: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-202-9871
Access Cover

332029871
223551811-01: RNCC: 3 | RNVC: 2
223551811-01: RNCC: 5 | RNVC: 2

18 Dec 2003

5340-33-000-0655
Access Cover

330000655
6.302.0.950.005.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-203-8251
Runner

332038251
40172690160: RNCC: 3 | RNVC: 2

11 Nov 2004

5340-33-181-7192
Angle Bracket

331817192
-06400425-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-0713
Mounting Bracket

331550713
M 43: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-106-7754
Access Cover

331067754
59925-T: RNCC: 3 | RNVC: 2
3350161: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-000-8444
Bow Handle

330008444
T-057040-25: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-33-000-4234
Expansion Plug

330004234
3340801871: RNCC: 1 | RNVC: 2
7145001: RNCC: 3 | RNVC: 2
91105427: RNCC: 5 | RNVC: 9

28 Dec 1987

5340-33-102-9725
Plug Button

331029725
323499: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-200-2670
Thumb Latch

332002670
100402013000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-200-3622
Angle Bracket

332003622
316449: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-33-000-7008
Loop Clamp

330007008
804042: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-206-4132
Flush Catch Claw

332064132
903.107.04: RNCC: 3 | RNVC: 2

28 Dec 2007

5340-33-003-2952
Corner Brace

330032952
721024514: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-116-3626
Mounting Bracket

331163626
2085.029: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-2350
Bumper

330042350
221603191: RNCC: 3 | RNVC: 2
EN221603191: RNCC: 5 | RNVC: 9

5 Oct 1998

5340-33-211-4688
Mounting Bracket

332114688
VR03307030: RNCC: 3 | RNVC: 2
VR03307030: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-000-7046
Loop Clamp

330007046
3090225049: RNCC: 1 | RNVC: 2
3090225049: RNCC: 3 | RNVC: 2

9 Sep 1988

5340-33-160-4313
Mending Plate

331604313
75.482.704: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-33-004-2352
Mounting Bracket

330042352
221603190: RNCC: 3 | RNVC: 2
EN221603-190: RNCC: 5 | RNVC: 9

5 Oct 1998

5340-33-001-4437
Lock-Release Lever

330014437
92026323: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-108-0035
Mounting Plate

331080035
9644.251.5375: RNCC: 3 | RNVC: 2
2540001331: RNCC: 5 | RNVC: 2
2540001331: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-003-7531
Bow Handle

330037531
1745262: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-205-9657
Runner

332059657
T130515: RNCC: 3 | RNVC: 2
07HMIR077: RNCC: 5 | RNVC: 2

4 Jun 2007

5340-33-001-0831
Mounting Bracket

330010831
35-46445-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-209-3088
Latch Bar

332093088
ZH 28 / 18-8: RNCC: 3 | RNVC: 2
C 3768 196 XQ: RNCC: 5 | RNVC: 2

27 Sep 2011

5340-33-116-0647
Loop Clamp

331160647
3313000007: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-4676
Utility Guard Rail Section

332094676
0664.10.8001.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-201-8175
Cushioning Pad

332018175
1005005860: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-201-0120
Access Cover

332010120
2540900255: RNCC: 3 | RNVC: 2
2540900255: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-116-2352
Handwheel

331162352
410.781: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-7193
Loop Clamp

332047193
E74089991005102: RNCC: 3 | RNVC: 2
36990-85C10: RNCC: 5 | RNVC: 2

16 Dec 2005

5340-33-161-4099
Mounting Bracket

331614099
739997: RNCC: 3 | RNVC: 2
28100266: RNCC: 5 | RNVC: 9

20 Jul 1995

5340-33-108-0005
Mounting Bracket

331080005
0639.250.8060: RNCC: 3 | RNVC: 2
2540000639: RNCC: 5 | RNVC: 2
2540000639: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-002-0001
Mounting Bracket

330020001
35-53342-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-161-6250
Access Cover

331616250
J-465: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-33-202-0713
Metal Grille

332020713
L3022.20.04/1.0: RNCC: 3 | RNVC: 2

3 Jan 2003

5340-33-004-4253
Bow Handle

330044253
-01605185-0: RNCC: 3 | RNVC: 2
-01606336-0: RNCC: 5 | RNVC: 2

25 Mar 1999

5340-33-202-6857
Expansion Plug

332026857
D0941311259: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-33-001-3911
Expansion Plug

330013911
92020319: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-115-9746
Access Cover

331159746
101.053.06.01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2469
Retaining Strap

331082469
9644.250.0591: RNCC: 3 | RNVC: 2
2510007402: RNCC: 5 | RNVC: 2
2510007402: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-154-5555
Retaining Strap

331545555
792509: RNCC: 3 | RNVC: 2
91105556: RNCC: 5 | RNVC: 9

4 Dec 1990

5340-33-201-8182
Cushioning Pad

332018182
1005006127: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-205-9251
Mounting Bracket

332059251
620164-1: RNCC: 3 | RNVC: 2

18 May 2007

5340-33-000-9754
Access Cover

330009754
35-21068-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-0061
Mounting Bracket

331070061
PCAMI/RP/0700000855: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-200-4661
Synchro Clamp

332004661
35-56350-0405: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-201-9298
Mounting Plate

332019298
BMR01000101-00P01: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-33-205-2991
Webbing Strap

332052991
09462-00008: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-203-9310
Angle Bracket

332039310
PS-601000: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-33-102-4014
Webbing Strap

331024014
MB51-8-1510: RNCC: 3 | RNVC: 2
MB51-8-1510: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-6550
Handwheel

330026550
C-2150B-20-06: RNCC: 3 | RNVC: 2

15 Jun 1995

5340-33-161-2400
Access Cover

331612400
736937: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-203-1093
Lock Bolt

332031093
5340-900080: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-158-8960
Loop Clamp

331588960
SS-06-0162T: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5457
Angle Bracket

331455457
85-511: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-000-0771
Rod End Clevis

330000771
16554: RNCC: 3 | RNVC: 2
14415067: RNCC: 6 | RNVC: 9

10 Jul 1986

5340-33-204-3345
Mounting Bracket

332043345
PCMSABMR044: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-33-103-1185
Mounting Bracket

331031185
375.093.3060: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1829
Mounting Bracket

332111829
VR03403000: RNCC: 3 | RNVC: 2
VR03403000: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-202-0976
Mounting Plate

332020976
44P31098-03-03 IZQDA: RNCC: 3 | RNVC: 2

10 Jan 2003

5340-33-001-0932
Mounting Bracket

330010932
35-46641-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-126-9032
Angle Bracket

331269032
25401040-3: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-001-4061
Bumper

330014061
92021360: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-158-1077
T Plate

331581077
528606: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-1427
Mounting Plate

332011427
SP05900: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-115-5061
Access Cover

331155061
110.056.02.00: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-106-8186
Mending Plate

331068186
196180: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-154-0674
Door Holder

331540674
682280: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-115-6083
Plain Solid Disk

331156083
92282218716: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-205-4015
Mounting Plate

332054015
5039836: RNCC: 3 | RNVC: 2
1.143.60.913: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-108-0014
Mounting Bracket

331080014
9644.250.7350: RNCC: 3 | RNVC: 2
2540000877: RNCC: 5 | RNVC: 2
2540000877: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-181-8156
Rod End Clevis

331818156
-09100961-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-2770
Loop Clamp

330012770
CAN67282D4M: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-0228
Access Cover

332010228
2990000451: RNCC: 3 | RNVC: 2
2990000451: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-201-0073
Mounting Bracket

332010073
9644.251.0070: RNCC: 3 | RNVC: 2
2510009933: RNCC: 5 | RNVC: 2
2510009933: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-154-6936
Angle Bracket

331546936
747060: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-000-6998
Loop Clamp

330006998
801548: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-004-5571
Mounting Bracket

330045571
NN53379G01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-160-7467
Retaining Clip

331607467
79.10.020.455: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5656
Mounting Plate

331065656
0466238: RNCC: 3 | RNVC: 2
0466238: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-108-4453
Webbing Strap

331084453
9644.250.6305: RNCC: 3 | RNVC: 2
2540001237: RNCC: 5 | RNVC: 2
2540001237: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-002-9629
Clamping Catch

330029629
6317600340: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-105-5622
Mechanical Stop

331055622
126468.61: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-107-0851
Rim Lock

331070851
871945: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-158-2233
Retaining Clip

331582233
0216525-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-7541
Plug Button

331607541
75.483.894: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-0445
Expansion Plug

331540445
194520: RNCC: 3 | RNVC: 2
194519: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-33-189-2043
Elastic Strap

331892043
01100090: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6738
Access Hole Frame

332026738
5034132: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-161-3057
Retaining Strap

331613057
503847: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-189-2335
Strapping

331892335
01610031: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-4332
Mounting Bracket

332044332
500005887: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-154-0204
Bow Handle

331540204
883771: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-004-8947
Block Clamp

330048947
NN58368P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-206-1195
Door Handle

332061195
SHN2220900: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-33-000-7505
Angle Bracket

330007505
770366: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-004-2846
Mounting Bracket

330042846
NN60092P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-126-2302
Mounting Plate

331262302
H11930/6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-9401
Bow Handle

331079401
SE141558740A: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-204-4687
Webbing Strap

332044687
TT01441001: RNCC: 3 | RNVC: 2
4830740003: RNCC: 5 | RNVC: 2

19 Sep 2005

5340-33-107-3029
Bow Handle

331073029
21124502000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-206-1188
Mounting Bracket

332061188
CBN60525P32: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-33-107-3417
Mounting Bracket

331073417
61.12.181: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-108-2474
Mending Plate

331082474
9644.250.0608: RNCC: 3 | RNVC: 2
2510007426: RNCC: 5 | RNVC: 2
2510007426: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-206-3393
Friction Catch

332063393
903.101.12: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-33-204-8612
Track Stop

332048612
14525000690: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-202-4629
Door Holder

332024629
AH0064: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-33-204-4653
Mounting Bracket

332044653
CBD50537P03: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-33-107-4619
Angle Bracket

331074619
7356.592.0052: RNCC: 3 | RNVC: 2
2510011260: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-189-1600
Access Cover

331891600
610602227: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-0134
Access Cover

331570134
-16827-V7200: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3541
Expansion Plug

330013541
92016062: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-7489
Angle Bracket

331577489
537121: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9949
Loop Clamp

332019949
4122401466: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-107-6288
Mounting Bracket

331076288
7356.252.2990: RNCC: 3 | RNVC: 2
2510700803: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-003-7534
Access Door Hinge

330037534
791323: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-154-6947
Angle Bracket

331546947
754599: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-190-3955
Mounting Bracket

331903955
1822: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-203-8469
Mounting Plate

332038469
368900064: RNCC: 3 | RNVC: 2
368900064: RNCC: 5 | RNVC: 2

1 Dec 2004

5340-33-004-5148
Mounting Bracket

330045148
753586: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-000-7035
Loop Clamp

330007035
3090214649: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-6309
Loop Clamp

330006309
568655: RNCC: 1 | RNVC: 2

14 Jun 1988

5340-33-181-0955
Metal Grille

331810955
-76816-G971X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-125-9919
Mounting Bracket

331259919
12102: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-145-5548
Block Clamp

331455548
15-255: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-204-4156
Mounting Bracket

332044156
W280698401580: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-204-1711
Threaded Rod End

332041711
064.02.01.05.07: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-33-160-3807
Retaining Strap

331603807
91.504.593: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-2246
Mending Plate

331542246
762911: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-154-6511
Loop Clamp

331546511
3090221549: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-154-5542
Retaining Strap

331545542
648395: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-001-5204
Access Cover

330015204
92030405: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-157-7388
Access Cover

331577388
510843: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8365
Catch Strike

331078365
230103: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-33-004-7122
Loop Clamp

330047122
NRN50052G11: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-161-2582
Angle Bracket

331612582
313063: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-005-1299
Threaded Rod End

330051299
114320603: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-33-108-4436
Mounting Bracket

331084436
9644.250.8270: RNCC: 3 | RNVC: 2
2540001054: RNCC: 5 | RNVC: 2
2540001054: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-157-7349
Blank Panel

331577349
322307: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2360
Angle Bracket

331562360
-64829-G9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-000-7026
Loop Clamp

330007026
3090211449: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-005-0148
Loop Clamp

330050148
SE022115040A: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-205-6464
Mounting Plate

332056464
1025901985: RNCC: 3 | RNVC: 2
9743.100.0604: RNCC: 5 | RNVC: 2

30 Jan 2007

5340-33-204-1068
Locking Stay

332041068
064.06.12: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-33-202-2755
Mounting Bracket

332022755
876283: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-33-202-6481
Mounting Bracket

332026481
9673.120.0280: RNCC: 3 | RNVC: 2
2510900610: RNCC: 5 | RNVC: 2
2510900610: RNCC: 5 | RNVC: 2

22 Sep 2003

5340-33-201-5726
Access Cover

332015726
185059: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-160-6199
Mounting Bracket

331606199
95.544.097: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-5545
Retaining Clip

331585545
-01201428-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2671
Access Cover

331082671
9644.121.0090: RNCC: 3 | RNVC: 2
2510011021: RNCC: 5 | RNVC: 2
2510011021: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-155-7526
Mending Plate

331557526
731791: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-1834
Loop Clamp

331081834
7054.292.0005: RNCC: 3 | RNVC: 2
4730700085: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-003-8103
Mounting Bracket

330038103
730092011: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-33-106-4561
Mechanical Stop

331064561
-80532-G9600: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-33-157-8449
Access Cover

331578449
753897: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8757
Mounting Bracket

332038757
114253-77410: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-33-004-8736
Loop Clamp

330048736
NN58377P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-204-0810
Webbing Strap

332040810
02512452: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-33-204-0814
Webbing Strap

332040814
02512439: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-33-157-8463
Mending Plate

331578463
754493: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-2506
Mounting Plate

332052506
M502945000000: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-33-106-5916
Bumper

331065916
42045518: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-189-1859
Mounting Bracket

331891859
02170030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7535
Mending Plate

331557535
750618: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-107-9307
Retaining Strap

331079307
7057.252.0034: RNCC: 3 | RNVC: 2
2510700299: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-200-6358
Access Cover

332006358
730220102: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-33-180-5620
Retaining Strap

331805620
156389: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-154-6531
Loop Clamp

331546531
321418: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-160-3808
Retaining Strap

331603808
26.141.539: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-5025
Angle Bracket

331075025
W290684601600: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-160-3283
Handwheel

331603283
401.372: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5196
Loop Clamp

331875196
276053: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-103-2507
Mounting Bracket

331032507
1055-000588: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9953
Mounting Bracket

332039953
999111222: RNCC: 3 | RNVC: 2
999111222: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-155-6161
Access Cover

331556161
815443: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-181-1156
Retaining Strap

331811156
-24210-C6300: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-1151
Retaining Strap

331811151
-20525-C8200: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-9215
Mounting Bracket

331559215
315851: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-000-2880
Access Cover

330002880
525237: RNCC: 1 | RNVC: 2

22 May 1987

5340-33-189-1655
Access Door Hinge

331891655
610602801: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3072
Hasp Staple

332013072
971210041: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-33-157-8004
Angle Bracket

331578004
690014: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4445
Mounting Plate

332004445
WW 321 606 -X: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-107-4531
Strap Fastener Loop

331074531
DESR 50: RNCC: 3 | RNVC: 2
PCAMI/RP/43E0DESR50: RNCC: 6 | RNVC: 9

4 Nov 1999

5340-33-108-2460
Mounting Bracket

331082460
9644.120.0370: RNCC: 3 | RNVC: 2
2510007119: RNCC: 5 | RNVC: 2
2510007119: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-002-8114
Door Closer

330028114
0004452092: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-155-7533
Mending Plate

331557533
713082: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-8375
Blank Panel

331578375
751286: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0310
Door Holder

331070310
9052923: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-202-4949
Mounting Plate

332024949
222421763-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-201-9514
Mounting Plate

332019514
223591310-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-202-9836
Mounting Plate

332029836
723552762-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-1655
Mounting Plate

332021655
223561779-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-188-7866
Expansion Plug

331887866
7139-615C: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-114-5122
Mounting Bracket

331145122
6 ILA 2-171: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-106-8875
Mounting Bracket

331068875
7356.252.0696: RNCC: 3 | RNVC: 2
2510011189: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-205-0657
Mounting Plate

332050657
0226010: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-33-154-0265
Butt Hinge

331540265
640881: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-003-7691
Handle Grip

330037691
0094427800: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-201-0703
Bow Handle

332010703
0850159: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-33-200-9795
Sliding Block

332009795
2510008638: RNCC: 3 | RNVC: 2
2510008638: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-126-5762
Rod End Connector

331265762
G38212-R-0300: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2489
Mounting Bracket

331032489
1055-000510: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-1455
Detent Plunger

330001455
1005-000992: RNCC: 3 | RNVC: 2
WK-W 9033.011206: RNCC: 5 | RNVC: 2

13 Mar 1997

5340-33-205-0788
Bridge Clamp

332050788
59671-03D00: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-002-7195
Mounting Bracket

330027195
NG0013304: RNCC: 3 | RNVC: 2
0013304: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-161-6125
Angle Bracket

331616125
MMCH4414M: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-206-4503
Mechanical Stop

332064503
10-22021-2503: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-33-157-8560
Angle Bracket

331578560
785345: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7301
Sliding Door Track

331577301
320056: RNCC: 3 | RNVC: 2

24 Jul 1995

Load More Results