What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 14 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 14 of 39

5340-33-200-5016
Mending Plate

332005016
19516600: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-201-4805
Eye Hook

332014805
NN60595P01: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-205-4930
Stand Base

332054930
WW MDB 020 AA: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-33-155-9020
Access Cover

331559020
646773: RNCC: 3 | RNVC: 2
646773: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-116-6263
Access Cover

331166263
102.010.003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7027
Loop Clamp

330007027
3090211549: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-7479
Angle Bracket

330007479
554863: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-001-3952
Compression Cup

330013952
92020526: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-202-0176
Mounting Plate

332020176
00.35.55: RNCC: 3 | RNVC: 2

13 Dec 2002

5340-33-206-4104
Stand Base

332064104
STB XBA 1000: RNCC: 3 | RNVC: 2

27 Dec 2007

5340-33-205-1386
Threaded Rod End

332051386
1.120.28.01.014: RNCC: 3 | RNVC: 2

12 May 2006

5340-33-161-3467
Angle Bracket

331613467
571066: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-33-200-6572
Rod End Clevis

332006572
L13006: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-33-157-7680
Blank Panel

331577680
571532: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-4434
Utility Guard Rail Section

332094434
0662.20.3005.00: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-33-107-7451
Mounting Bracket

331077451
W290684037300: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-001-4438
Lock-Release Lever

330014438
92026324: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-209-4217
Utility Guard Rail Section

332094217
0661.10.9500: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-33-108-2578
Mending Plate

331082578
9644.251.0154: RNCC: 3 | RNVC: 2
2510009945: RNCC: 5 | RNVC: 2
2510009945: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-114-3966
Mounting Bracket

331143966
WW 200743: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-157-8497
Angle Bracket

331578497
767821: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-4324
Locking Stay

331604324
95.533.022: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-8980
Mounting Bracket

332018980
020268: RNCC: 3 | RNVC: 2
020268: RNCC: 5 | RNVC: 2
1400000020628: RNCC: 5 | RNVC: 2

11 Nov 2002

5340-33-211-2068
Retaining Strap

332112068
212-83228-1: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-106-3572
Mounting Bracket

331063572
1777B4146/3.6.13.39: RNCC: 3 | RNVC: 2

25 Nov 1997

5340-33-154-5527
Retaining Strap

331545527
320866: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-202-0303
Pipe Hanger

332020303
1025-901474: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-106-9409
Mounting Plate

331069409
324267: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-108-4360
Catch Strike

331084360
9644.251.6083: RNCC: 3 | RNVC: 2
2510900275: RNCC: 5 | RNVC: 2
2510900275: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-1265
Mounting Bracket

330011265
35-51073-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-166-1226
Loop Clamp

331661226
301005-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-4621
Door Handle

331564621
-82671-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0110
Access Cover

332050110
19623302: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-206-1766
Mounting Bracket

332061766
PCMSABMR095: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-33-204-4162
Mounting Bracket

332044162
W280698400201: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-004-8204
Angle Bracket

330048204
NN60174P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-108-2390
Mechanical Stop

331082390
9644.250.0332: RNCC: 3 | RNVC: 2
2510006546: RNCC: 5 | RNVC: 2
2510006546: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-200-2771
Access Door Hinge

332002771
100441010001: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-107-9529
Clevis And U-Bolt

331079529
SP08903: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-200-8933
Mounting Bracket

332008933
7562.252.0256: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-205-8968
Utility Access Door

332058968
GE75011300: RNCC: 3 | RNVC: 2

8 May 2007

5340-33-205-6551
Mounting Plate

332056551
1025901942: RNCC: 3 | RNVC: 2
9743.100.0345: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-33-200-4965
Bridge Clamp

332004965
19513200: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-206-0876
Stand Base

332060876
589B10015MAS: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-33-107-3030
Bow Handle

331073030
21124502500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-158-2240
Retaining Clip

331582240
0216532-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4253
Leather Strap

330034253
159-385: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-160-7472
Retaining Clip

331607472
75.515.213: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-6804
Mounting Bracket

330036804
316992: RNCC: 3 | RNVC: 2
316992: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-156-2188
Angle Bracket

331562188
-85200-C6000: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-205-4099
Access Cover

332054099
W290620308900: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-157-8109
Blank Panel

331578109
731782: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-7959
Mounting Bracket

332007959
321476: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-004-2838
Angle Bracket

330042838
NN60190P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-157-8508
Angle Bracket

331578508
770748: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4205
Access Cover

330034205
11.28951-1524: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-004-4146
Self-Locking Insert

330044146
0265.10402: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-211-6071
Mounting Bracket

332116071
0918289000600: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-204-0809
Webbing Strap

332040809
02512558: RNCC: 3 | RNVC: 2
02517011: RNCC: 5 | RNVC: 2

10 Mar 2005

5340-33-158-2227
Retaining Clip

331582227
0216515-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-1388
Beam Gripping Clamp

332051388
1.120.26.02.005: RNCC: 3 | RNVC: 2

12 May 2006

5340-33-115-8167
Access Cover

331158167
92095901810: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-201-1902
Retaining Clip

332011902
SP07281: RNCC: 3 | RNVC: 2

30 May 2002

5340-33-107-4277
Access Cover

331074277
-96980-G970X: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-33-004-7799
Retaining Strap

330047799
-10205009-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-003-4788
Utility Access Door

330034788
105 6911: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-33-108-2448
Mounting Bracket

331082448
9644.120.0310: RNCC: 3 | RNVC: 2
2510007044: RNCC: 5 | RNVC: 2
2510007044: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-106-7309
Door Closer

331067309
00.431.553.00: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-202-9070
Mounting Plate

332029070
223552718-01: RNCC: 3 | RNVC: 2
223552718: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-202-9828
Mounting Plate

332029828
723552731-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-203-5016
Access Cover

332035016
95-22814-0001: RNCC: 3 | RNVC: 2

4 May 2004

5340-33-202-9026
Access Cover

332029026
223551375-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-6526
Mounting Plate

332026526
722411453-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-211-4685
Vent Plug

332114685
VR03306000: RNCC: 3 | RNVC: 2
VR03306000: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-000-7063
Retaining Band

330007063
591551: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-201-6475
Mounting Bracket

332016475
1025-900483: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-136-5019
Access Cover

331365019
2N066047: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-4627
Thumb Latch

331064627
2030180: RNCC: 3 | RNVC: 2
ALMCTI-1000002030180: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-200-1556
Pipe Hanger

332001556
95-46386-0002A02: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-33-004-2841
Angle Bracket

330042841
NN60112P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-154-6474
Angle Bracket

331546474
821913: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-108-2687
Utility Access Door

331082687
9644.251.0374: RNCC: 3 | RNVC: 2
2510900085: RNCC: 5 | RNVC: 2
2510900085: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-202-5244
Angle Bracket

332025244
MHC2030110: RNCC: 3 | RNVC: 2
MHC1030110: RNCC: 5 | RNVC: 2

1 Aug 2003

5340-33-203-8594
Mounting Plate

332038594
2123020010: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-33-204-7139
Loop Clamp

332047139
2020382: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-33-202-6780
Mounting Bracket

332026780
9673.590.5081: RNCC: 3 | RNVC: 2
2510903202: RNCC: 5 | RNVC: 2
2510903202: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-204-4343
Mounting Bracket

332044343
500006460: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-204-0784
Bumper

332040784
M2.00001: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-33-157-7979
Mending Plate

331577979
648794: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-6911
Bridge Clamp

332056911
2007999: RNCC: 3 | RNVC: 2

23 Feb 2007

5340-33-187-5587
Loop Clamp

331875587
0301127-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3841
Door Closer

331603841
95.605.959: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3417
Compression Cup

330013417
92014650: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-127-0292
Access Door Hinge

331270292
X 10869-403: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-33-204-6184
Access Cover

332046184
PS-210189: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-33-201-3121
Mounting Plate

332013121
111-30-11370: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-33-201-9542
Access Cover

332019542
223591710-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-200-6323
Threaded Rod End

332006323
IN-050V-G02I.19: RNCC: 3 | RNVC: 2

13 Feb 2002

5340-33-116-0713
Mechanical Stop

331160713
CA-18588100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-1795
Catch Strike

332031795
9673.250.5475: RNCC: 3 | RNVC: 2
2540900853: RNCC: 5 | RNVC: 2
2540900853: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-202-6967
Mounting Bracket

332026967
9673.250.1540: RNCC: 3 | RNVC: 2
2540901127: RNCC: 5 | RNVC: 2
2540901127: RNCC: 5 | RNVC: 2

26 Sep 2003

5340-33-115-9281
Mounting Plate

331159281
01.00350/01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-4650
Access Cover

332024650
MF-89-28-20-72: RNCC: 3 | RNVC: 2

26 Jun 2003

5340-33-004-4625
Retaining Strap

330044625
R508-15: RNCC: 3 | RNVC: 2

19 May 1999

5340-33-116-0534
Access Cover

331160534
OB-18297000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6016
Access Cover

332026016
550280: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-33-205-8523
Mounting Bracket

332058523
2938-001: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-003-3468
Mounting Bracket

330033468
302459: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-181-3537
Mounting Plate

331813537
-10100509-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-0031
Mending Plate

330010031
35-32244-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-0171
Mounting Plate

332010171
2590900144: RNCC: 3 | RNVC: 2
2590900144: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-211-1835
Mounting Bracket

332111835
VR06020100: RNCC: 3 | RNVC: 2
VR06020100: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-158-9937
Threaded Rod End

331589937
97.501.527.80: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-6536
Mounting Plate

332036536
CBD50523P09: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-33-145-6435
Loop Clamp

331456435
TAB. C11-17: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-6126
Angle Bracket

331616126
MMCH4415M: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-202-7078
Mounting Bracket

332027078
9673.250.6480: RNCC: 3 | RNVC: 2
2540900817: RNCC: 5 | RNVC: 2
2540900817: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-157-8535
Angle Bracket

331578535
782052: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-1272
Utility Access Door

332041272
M2.00008: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-33-155-7540
Mending Plate

331557540
818895: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-115-8178
Access Cover

331158178
92290217619: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-205-9046
Strap Hinge

332059046
3026: RNCC: 3 | RNVC: 2

9 May 2007

5340-33-204-1648
Bumper

332041648
2510903346: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-33-204-7515
Mounting Plate

332047515
5038129: RNCC: 3 | RNVC: 2
1.124.60.079.03-A: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-106-5134
Mounting Bracket

331065134
021.04.02.02: RNCC: 3 | RNVC: 2

23 Mar 1998

5340-33-211-5010
Loop Clamp

332115010
AC600032: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-200-8911
Mounting Bracket

332008911
W290698605600: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-155-9013
Access Cover

331559013
316221: RNCC: 3 | RNVC: 2
316221: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-001-5526
Angle Bracket

330015526
92041215: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-203-4818
Webbing Strap

332034818
23184855000: RNCC: 3 | RNVC: 2

24 Apr 2004

5340-33-002-1602
Mounting Plate

330021602
921.330.06: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-001-1058
Mounting Bracket

330011058
35-46736-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0638
Mounting Bracket

330010638
35-46284-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-3687
Access Cover

332053687
201530300: RNCC: 3 | RNVC: 2
201530300: RNCC: 5 | RNVC: 2
4320-33-M30-0358: RNCC: 6 | RNVC: 9

30 Aug 2006

5340-33-181-1155
Retaining Strap

331811155
-24220-H5007: RNCC: 3 | RNVC: 2
-24220-R8000: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-104-7959
Access Cover

331047959
119-14-00-00: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-33-116-7047
Angle Bracket

331167047
24.13.17.0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0656
Access Cover

330000656
6.305.0.787.011.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-188-7697
Loop Clamp

331887697
02200180: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-106-5909
Retaining Clip

331065909
1349209: RNCC: 3 | RNVC: 2
1349209: RNCC: 5 | RNVC: 2

4 Sep 1998

5340-33-200-5849
Cushioning Pad

332005849
CR 406 809: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-001-3645
Angle Bracket

330013645
92018700: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-004-5208
Mending Plate

330045208
718222: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-157-7408
Angle Bracket

331577408
515443: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-203-9017
Latch Bar

332039017
055-03.06.02: RNCC: 3 | RNVC: 2
055-11.03.02: RNCC: 5 | RNVC: 2

4 Jan 2005

5340-33-200-1172
Angle Bracket

332001172
7059.252.0093: RNCC: 3 | RNVC: 2
2510701118: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-000-7059
Retaining Band

330007059
558315: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-180-7908
Mounting Bracket

331807908
552583K1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-6871
Corner Brace

331586871
-60089717-K3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-1652
Mounting Bracket

331021652
MBCE-4-69: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-2045
Plug Button

331812045
-01300515-0: RNCC: 3 | RNVC: 2
01300639-0: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-189-1853
Mounting Bracket

331891853
02030100: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-154-0270
Butt Hinge

331540270
810514: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-003-0049
Loop Clamp

330030049
000054778900: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-211-2002
Mounting Plate

332112002
098242949: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-001-4293
Bumper

330014293
92026088: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-154-0267
Butt Hinge

331540267
802957: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-102-5780
Butt Hinge

331025780
272-C: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-7354
Clamp Bolt Assembly

331087354
DW 301 480 A: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-126-3186
Corner Brace

331263186
6.302.0.972.008.4: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-33-126-3188
Angle Bracket

331263188
6.302.0.637.008.5: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-33-106-6773
Catch Strike

331066773
-80502-H8510: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-33-157-8045
Angle Bracket

331578045
699681: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4038
Bail Handle

330014038
92021311: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-116-7117
Access Cover

331167117
104.162.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-5518
Access Cover

331165518
28410-ZE1-003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2391
Mounting Bracket

331032391
1055-000408: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1488
Mounting Bracket

330011488
35-56140-0003: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-205-7995
Mounting Bracket

332057995
4933900102: RNCC: 3 | RNVC: 2
9682.101.4500/702: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-33-161-2158
Catch Strike

331612158
1015-000516: RNCC: 3 | RNVC: 2

29 Jun 1993

5340-33-160-7531
Plug Button

331607531
79.03.077.055: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-7467
Mounting Plate

331077467
W290684070400: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-201-0434
Elastic Strap

332010434
5340001563: RNCC: 3 | RNVC: 2
5340001563: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-201-7204
Mounting Bracket

332017204
1025-901319: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-203-6512
Mounting Bracket

332036512
9356.252.7110: RNCC: 3 | RNVC: 2
2510-903921: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-201-3413
Mounting Bracket

332013413
7356.252.2820: RNCC: 3 | RNVC: 2
1055001772: RNCC: 5 | RNVC: 2

27 Jun 2002

5340-33-154-0276
Butt Hinge

331540276
820157: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-204-6918
Angle Bracket

332046918
CA82700-0101: RNCC: 3 | RNVC: 2

9 Dec 2005

5340-33-001-6493
Access Cover

330016493
D56990-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-126-0624
Access Cover

331260624
0116-01: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-000-6699
Retaining Strap

330006699
680002: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-190-2538
Retaining Strap

331902538
3220: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-107-6390
Mounting Bracket

331076390
7060.252.0170: RNCC: 3 | RNVC: 2
2510700800: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-107-4350
Utility Access Door

331074350
W290683139300: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-201-1022
Butt Hinge

332011022
35-14149-0004A02: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-116-3164
Access Cover

331163164
2515.070: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-1904
Metal Grille

331891904
02120130: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-9287
Angle Bracket

332059287
41025901994: RNCC: 3 | RNVC: 2
9743.100.0617: RNCC: 5 | RNVC: 2

21 May 2007

5340-33-108-2583
Mounting Bracket

331082583
9644.251.0370: RNCC: 3 | RNVC: 2
2510009950: RNCC: 5 | RNVC: 2
2510009950: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-107-0624
Access Door Hinge

331070624
9072918: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-8496
Mounting Bracket

331078496
-82870-G2500: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-160-3773
Plug Button

331603773
95.634.161: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-6494
Threaded Rod End

331606494
79.01.584.616: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-3187
Angle Bracket

331263187
9.303.1.637.002.4: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-33-107-0843
Rim Lock

331070843
01605002-1: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-105-1175
Access Cover

331051175
CMA90100-1/8: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-116-8344
Rod End Clevis

331168344
22 504: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-102-3925
Handle Grip

331023925
42320100100: RNCC: 3 | RNVC: 2
MBL-3-10: RNCC: 3 | RNVC: 2
MBL-3-1000: RNCC: 3 | RNVC: 2
42320100100: RNCC: 3 | RNVC: 2
MBL-3-10: RNCC: 3 | RNVC: 2
MBL-3-1000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2985
Loop Clamp

330012985
CAN68505: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-108-2748
Access Cover

331082748
9644.251.0455: RNCC: 3 | RNVC: 2
2510901148: RNCC: 5 | RNVC: 2
2510901148: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-154-5515
Retaining Strap

331545515
318948: RNCC: 3 | RNVC: 2
5340001081: RNCC: 3 | RNVC: 2
318948: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-157-8034
Angle Bracket

331578034
698649: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0689
Angle Bracket

331080689
323738: RNCC: 3 | RNVC: 2
323738: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-108-2021
Mounting Bracket

331082021
GE12240000: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-33-180-5538
Butt Hinge

331805538
138294: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-190-3871
Loop Clamp

331903871
1203: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-200-1968
Retaining Band

332001968
J57166521-002: RNCC: 3 | RNVC: 2

2 Nov 2001

5340-33-002-8448
Retaining Strap

330028448
SE128141538A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-201-9881
Access Cover

332019881
1025-900234: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-201-4196
Retaining Bail

332014196
99.08.118: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-108-6967
Mounting Bracket

331086967
7058.252.0005: RNCC: 3 | RNVC: 2
2510701097: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-155-7735
Angle Bracket

331557735
512583: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-107-9288
Mounting Bracket

331079288
7057.252.0051: RNCC: 3 | RNVC: 2
2510700179: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-205-2434
Access Cover

332052434
40154010061: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-004-3202
Access Hole Frame

330043202
631 630 10 23: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-201-7110
Mounting Bracket

332017110
1025-901668: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-33-001-4461
Bumper

330014461
92026347: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-156-4638
Rod End Connector

331564638
-14875-H1900: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0475
Mounting Plate

331080475
9644.281.5080: RNCC: 3 | RNVC: 2
2520000427: RNCC: 5 | RNVC: 2
2520000427: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-001-4795
Angle Bracket

330014795
92026834: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-106-5597
Access Cover

331065597
462443BA: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-33-187-5529
Loop Clamp

331875529
0201402-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5235
Access Cover

330045235
551857: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-209-7664
Utility Guard Rail Section

332097664
0661.10.4502.00: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-181-2529
Handle Grip

331812529
-07701201-1: RNCC: 3 | RNVC: 2
-07701078-1: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-107-9763
Mounting Bracket

331079763
9644.250.8420: RNCC: 3 | RNVC: 2
2540001201: RNCC: 5 | RNVC: 2
2540001201: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-201-2179
Utility Access Door

332012179
A2810437-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-206-1765
Mounting Plate

332061765
PCMSABMR094: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-33-206-1771
Mounting Plate

332061771
PCMSABMR098: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-33-205-8520
Mounting Bracket

332058520
2862-101: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-102-2509
Snap Hook

331022509
1005-001720: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-156-5043
Loop Clamp

331565043
-99601-20500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-0230
Access Cover

331570230
-76830-G2591: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-1662
Handwheel

331891662
6122011: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-004-2831
Angle Bracket

330042831
NN60073P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-003-0765
Door Handle

330030765
01611003-1: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-000-1291
Detent Plunger

330001291
1005-000805: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-001-0684
Mounting Bracket

330010684
35-46336-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-9550
Access Cover

332019550
723591776-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-201-3840
Access Cover

332013840
223581350-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-002-5303
Threaded Rod End

330025303
CA250-05-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-115-9272
Mounting Plate

331159272
01.00432/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-5038
Detent Plunger

331145038
5TG 4-28: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-107-9163
Angle Bracket

331079163
120074: RNCC: 3 | RNVC: 2

26 Sep 2000

5340-33-000-1891
Loop Clamp

330001891
3090216949: RNCC: 1 | RNVC: 2
3090216949: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-211-4684
Mounting Bracket

332114684
VR03305050: RNCC: 3 | RNVC: 2
VR03305050: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-157-5066
Self-Locking Insert

331575066
-74500029-0: RNCC: 3 | RNVC: 2
403 070 00 55: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-001-3363
Mounting Bracket

330013363
92014013: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-102-1516
Mounting Bracket

331021516
B-3-29A: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-9157
Expansion Shield

330019157
C-20050-4-0-I-03-9: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-201-3845
Access Cover

332013845
223581726-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-201-9539
Mounting Plate

332019539
223591703-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-103-2422
Angle Bracket

331032422
1055-000333: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0050
Mounting Bracket

330010050
35-32344-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-181-5829
Mounting Bracket

331815829
-01201441-4: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-5149
Loop Clamp

331165149
4008078: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-33-116-0540
Access Cover

331160540
BM-11259000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3444
Access Cover

332053444
CGD-11101102-01: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-33-158-7842
Turnbuckle

331587842
445-008: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-201-2947
Access Cover

332012947
222411531-01: RNCC: 3 | RNVC: 2
222411531-01: RNCC: 5 | RNVC: 2

20 Jun 2002

5340-33-001-9637
Rod End Connector

330019637
35-25127-2101: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-33-105-9665
Mending Plate

331059665
1.120.18.04.006: RNCC: 3 | RNVC: 2

21 Sep 1996

5340-33-106-7994
Strap Fastener Loop

331067994
6.371-027.0-MEISA: RNCC: 3 | RNVC: 2
PCAMI/RP/1206371027: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-104-7881
Expansion Plug

331047881
1 410 551 036: RNCC: 3 | RNVC: 2
514378: RNCC: 5 | RNVC: 2

21 Aug 1995

5340-33-155-7773
Angle Bracket

331557773
574956: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-5521
Retaining Strap

331545521
319683: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-154-6528
Loop Clamp

331546528
320483: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-001-1937
Mounting Bracket

330011937
35-66112-1001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-9929
Door Closer

330009929
35-22790-1201-00: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-5951
Access Cover

332005951
WW 493 367 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-201-4611
Angle Bracket

332014611
J28265130-401: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-201-4762
Access Cover

332014762
J52463000-002: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-105-7710
Turnbuckle Body

331057710
739178: RNCC: 3 | RNVC: 2

19 Jun 1996

5340-33-001-6539
Mounting Bracket

330016539
CA86200-0001: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-203-5835
Filler Opening Cap

332035835
TONDIAA49: RNCC: 3 | RNVC: 2
PCAMI/RP/08000000000A11: RNCC: 5 | RNVC: 2

1 Jun 2004

5340-33-166-0428
Access Cover

331660428
BW-63: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-1446
Mounting Bracket

332011446
113-0923-04: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-116-2771
Loop Clamp

331162771
5.53: RNCC: 3 | RNVC: 9

13 Sep 1995

5340-33-188-9828
Rod End Clevis

331889828
3 122 061: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-108-0598
Access Cover

331080598
7356.591.0015: RNCC: 3 | RNVC: 2
1055700009: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-33-205-3540
Mounting Plate

332053540
5033804: RNCC: 3 | RNVC: 2
1.128.72.002: RNCC: 5 | RNVC: 2

23 Aug 2006

5340-33-107-8463
Mending Plate

331078463
-06902206-0: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-001-1048
Mounting Bracket

330011048
35-46731-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-6834
Mounting Plate

332046834
PS-510021: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-33-116-3882
Mounting Bracket

331163882
GP-2025330: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-1207
Detent Plunger

330001207
1005-000679: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-205-0787
Bridge Clamp

332050787
56211-29F00: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-203-5284
Access Cover

332035284
247704000: RNCC: 3 | RNVC: 2
247704000: RNCC: 5 | RNVC: 2
4320-33-M32-7263: RNCC: 6 | RNVC: 9

8 May 2004

5340-33-001-2786
Loop Clamp

330012786
CAN67311-7: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-115-8164
Access Cover

331158164
92290217499: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-160-6489
Bow Handle

331606489
5.482.478: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-4665
Retaining Strap

331074665
7356.252.0869: RNCC: 3 | RNVC: 2
5340001795: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-205-9953
Flush Catch Claw

332059953
WQ 884 407: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-33-211-1831
Angle Bracket

332111831
VR03405000: RNCC: 3 | RNVC: 2
VR03405000: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-211-0885
Mounting Bracket

332110885
212-81245-04-1: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-33-005-3283
Mounting Plate

330053283
MM-86: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-33-105-0576
Mounting Bracket

331050576
REM-50-4-2: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-001-1939
Mounting Bracket

330011939
35-66113-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-157-8819
Blank Panel

331578819
900496: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-6115
Angle Bracket

332056115
1025902025: RNCC: 3 | RNVC: 2
9743.100.9004: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-161-5163
Mounting Bracket

331615163
317683: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-33-157-7847
Blank Panel

331577847
630131: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4486
Mounting Plate

331074486
W280680200001: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-33-155-7546
Mending Plate

331557546
632793: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-160-5679
Loop Clamp

331605679
91.515.415: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7528
Mending Plate

331557528
807920: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-7746
Angle Bracket

331067746
34790: RNCC: 3 | RNVC: 2
4350489: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-201-1043
Rod End Clevis

332011043
323883: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-202-7688
Access Cover

332027688
SP05031: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-107-3986
Rod End Clevis

331073986
RE-25-4-3-7: RNCC: 3 | RNVC: 2
RE-50-4-1-7: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-002-0010
Mounting Bracket

330020010
35-63644-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-103-2572
Lever Bracket

331032572
A-5-24: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-7159
Lever Bracket

331817159
-06300184-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6211
Mounting Bracket

332026211
9673.250.1220: RNCC: 3 | RNVC: 2
1005900334: RNCC: 5 | RNVC: 2
1005900334: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-116-1640
Rod End Clevis

331161640
3 129 185: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-9793
Access Cover

331889793
3 170 071: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-187-5590
Loop Clamp

331875590
0301130-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9357
Angle Bracket

331159357
9.325.1.630.005.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-5881
Mounting Plate

332005881
CF 826 040 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-155-7709
Angle Bracket

331557709
616468: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-2720
Screw Hook

332012720
132: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-33-204-3060
Mounting Bracket

332043060
220301020: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-33-108-4430
Mounting Bracket

331084430
9644.250.8010: RNCC: 3 | RNVC: 2
2540001038: RNCC: 5 | RNVC: 2
2540001038: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-1156
Access Cover

332001156
7053.252.0128: RNCC: 3 | RNVC: 2
2510700127: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-181-0152
Mending Plate

331810152
-14332-36W00: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-187-4976
Access Cover

331874976
204436: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-4153
Loop Clamp

331544153
3090213649: RNCC: 3 | RNVC: 2
3090213649: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-201-4197
Angle Bracket

332014197
A2811733-403: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-156-4634
Hinged Hasp

331564634
-82570-G2500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-4514
Access Cover

331604514
95.612.452: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-5120
Retaining Strap

331035120
1303: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-116-3546
Mending Plate

331163546
6275.038: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-4269
Access Cover

331064269
820734: RNCC: 3 | RNVC: 2
23100298: RNCC: 5 | RNVC: 9

5 Jan 1998

5340-33-155-9250
Rod End Clevis

331559250
881324: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-200-9799
Runner

332009799
2510008642: RNCC: 3 | RNVC: 2
2510008642: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-126-8122
Mounting Plate

331268122
583506: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-3142
Access Cover

330043142
500300021: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-001-3210
Retaining Strap

330013210
92010800: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-107-6729
Mounting Bracket

331076729
SE024563354A: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-158-2054
Mounting Bracket

331582054
202288: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-107-0510
Bow Handle

331070510
00.605.152.00: RNCC: 3 | RNVC: 2

26 May 1999

5340-33-114-4831
Mounting Bracket

331144831
10ILA 1-58: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-107-0617
Access Door Hinge

331070617
401220203: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-188-8439
Angle Bracket

331888439
1220081: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-116-2354
Rod End Clevis

331162354
50.139.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-6228
Access Cover

331556228
820330: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-156-5012
Loop Clamp

331565012
-27466-Q0100: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-001-4307
Retaining Strap

330014307
92026102: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-201-7871
Angle Bracket

332017871
NN60529G01: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-126-8116
Mounting Plate

331268116
579483: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1520
Mounting Bracket

332111520
VR03401030: RNCC: 3 | RNVC: 2
VR03401030: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-205-5215
Handle Grip

332055215
4143 30 125: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-33-002-1580
Access Cover

330021580
921.261.02: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-002-9243
Loop Clamp

330029243
6312410045: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-002-5159
Doorknob

330025159
212-46120-24-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-001-1120
Mounting Bracket

330011120
35-47111-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-7519
Mounting Plate

332047519
5038125: RNCC: 3 | RNVC: 2
1.124.60.077.01-A: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-154-6541
Loop Clamp

331546541
615399: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-003-6857
Access Cover

330036857
CM30660004400: RNCC: 3 | RNVC: 2

1 Jun 1998

5340-33-003-4476
Access Cover

330034476
721010510: RNCC: 3 | RNVC: 2

16 Sep 1997

5340-33-188-9826
Rod End Clevis

331889826
3 170 193: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-190-3870
Loop Clamp

331903870
1202: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-001-3466
Mounting Bracket

330013466
92014803: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-204-4655
Mending Plate

332044655
CBD50537P07: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-33-103-5145
Retaining Strap

331035145
1443-6-7: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-000-6659
Retaining Strap

330006659
145305: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-145-5903
Mounting Plate

331455903
0921062: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7127
Loop Clamp

330047127
NRN50052G21: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-181-1181
Mortise Lock Set

331811181
-90506-G9602: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8444
Access Cover

331578444
753788: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-4737
Access Cover

330044737
120785: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-211-3006
Mounting Plate

332113006
5061559: RNCC: 3 | RNVC: 2
1.164.91.018: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-201-4067
Angle Bracket

332014067
A2810556-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-104-7549
Handle Grip

331047549
6730.019: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6681
Mounting Bracket

330036681
1137.11.906: RNCC: 3 | RNVC: 2
1137.11.906: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-155-1697
Rod End Clevis

331551697
22,30.02: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-155-7477
Mending Plate

331557477
313259: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-0296
Stand Base

332020296
1025-901444: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-160-3684
Rim Lock

331603684
1710055: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-2658
Access Cover

330042658
730096303: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-202-1025
Sliding Block

332021025
880250102: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-33-004-6079
Mounting Plate

330046079
521481: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-33-116-7840
Mending Plate

331167840
01.00573/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-3416
Bail Handle

330043416
M51EN00040997: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-33-204-6477
Spring Tension Clip

332046477
5036086: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-33-003-2247
Mounting Plate

330032247
721010503: RNCC: 3 | RNVC: 2

27 Jan 1997

5340-33-115-8528
Access Cover

331158528
20701: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-003-4312
Mounting Plate

330034312
159-738: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-002-9596
Hinge Torsion Bar

330029596
6317430252: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-206-1917
Mounting Bracket

332061917
PN3110834-2: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-33-106-5632
Bumper

331065632
02311019-0: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-105-7297
Flush Bolt

331057297
-82503-Y9500: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-156-2369
Angle Bracket

331562369
-64828-G9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-203-9979
Access Cover

332039979
204900203: RNCC: 3 | RNVC: 2
204900203: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-161-3549
Access Cover

331613549
566100: RNCC: 3 | RNVC: 2
41100007: RNCC: 5 | RNVC: 9

20 Jul 1995

5340-33-004-2353
Stand Base

330042353
221601138: RNCC: 3 | RNVC: 2
EN221601-138: RNCC: 5 | RNVC: 9

5 Oct 1998

5340-33-106-4008
Rim Lock Set

331064008
-80501-G970X: RNCC: 3 | RNVC: 2
80501-G9800: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-001-7962
Access Cover

330017962
C-18040-1-0-CR-29: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-33-209-2542
Retaining Bail

332092542
PS-210717: RNCC: 3 | RNVC: 9

7 Sep 2011

5340-33-001-6382
Mounting Bracket

330016382
D56363-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-106-8078
Turnbuckle

331068078
RE-25-2-2-27: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-004-5280
Locking Stay

330045280
052032: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-206-1203
Utility Access Door

332061203
SEOD211320: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-33-157-8453
Access Cover

331578453
754170: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4279
Mounting Plate

331084279
9644.470.5044: RNCC: 3 | RNVC: 2
2510010166: RNCC: 5 | RNVC: 2
2510010166: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-201-4656
Angle Bracket

332014656
J92561475-001: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-154-6933
Angle Bracket

331546933
638428: RNCC: 3 | RNVC: 2
638428: RNCC: 5 | RNVC: 9

3 Dec 1990

5340-33-001-3497
Access Cover

330013497
92016015: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-155-7463
Mending Plate

331557463
2520000276: RNCC: 3 | RNVC: 2
312680: RNCC: 3 | RNVC: 2
312680: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-104-0433
Turnbuckle

331040433
12 0159: RNCC: 3 | RNVC: 2
120434X: RNCC: 5 | RNVC: 2

25 Jul 1995

5340-33-001-0434
Mounting Bracket

330010434
35-46110-1601: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-7586
Retaining Strap

332057586
H000000163: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-33-154-2234
Mending Plate

331542234
642072: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-107-3092
Access Cover

331073092
21124820000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-004-4739
Angle Bracket

330044739
191960: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-108-0491
Mounting Bracket

331080491
0639.280.0590: RNCC: 3 | RNVC: 2
2930000211: RNCC: 5 | RNVC: 2
2930000211: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-205-8974
Access Cover

332058974
1025900451: RNCC: 3 | RNVC: 2
9682.101.1216: RNCC: 5 | RNVC: 2

8 May 2007

5340-33-106-8266
Access Cover

331068266
193198: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-202-5286
Mounting Plate

332025286
MHC2150350: RNCC: 3 | RNVC: 2
MHC1150350: RNCC: 5 | RNVC: 2

4 Aug 2003

5340-33-206-2304
Mounting Bracket

332062304
0783620000600: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-33-116-5282
Retaining Strap

331165282
4615971: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-5284
Retaining Strap

331165284
5957704: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-9349
Loop Clamp

332059349
98151993: RNCC: 3 | RNVC: 2

23 May 2007

5340-33-201-7717
Mounting Bracket

332017717
7055.252.0320: RNCC: 3 | RNVC: 2
2510701466: RNCC: 5 | RNVC: 2

22 Oct 2002

5340-33-189-2154
Access Cover

331892154
01210022: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-201-1397
Mounting Bracket

332011397
7054.252.2070: RNCC: 3 | RNVC: 2
2540700053: RNCC: 5 | RNVC: 2

16 May 2002

5340-33-205-7049
Lock-Release Lever

332057049
6686 150: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-33-156-2331
Angle Bracket

331562331
-21558-Y9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-106-1084
Loop Clamp

331061084
0856297: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-33-155-9308
Retaining Strap

331559308
640237: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-211-4780
Mounting Bracket

332114780
0853789000400: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-202-4975
Access Cover

332024975
MHC2090100: RNCC: 3 | RNVC: 2
MHC1090100: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-33-003-4798
Access Cover

330034798
105 6931: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-33-161-5022
Access Cover

331615022
195831: RNCC: 3 | RNVC: 2
1278 340 047: RNCC: 3 | RNVC: 2
195831: RNCC: 5 | RNVC: 2

15 Mar 1994

5340-33-106-8194
Mending Plate

331068194
7356.252.0005: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-209-6820
Utility Resilient Mount

332096820
M1810801: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-33-161-5141
Bumper

331615141
320081: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-202-7118
Metal Grille

332027118
9673.250.5801: RNCC: 3 | RNVC: 2
2540901137: RNCC: 5 | RNVC: 2
2540901137: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-203-3383
Webbing Strap

332033383
5036345: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-003-6790
Door Hook

330036790
314210: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-154-6485
Loop Clamp

331546485
3090110611: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-157-5426
Loop Clamp

331575426
546069: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3930
Mounting Plate

332003930
CF 494 879 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-181-8249
Retaining Band

331818249
-10100354-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5387
Furniture Cup

331065387
C0301060: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0301060: RNCC: 4 | RNVC: 1
030106: RNCC: 5 | RNVC: 2
00300400748: RNCC: 5 | RNVC: 2

8 Apr 1998

5340-33-204-0836
Utility Access Door

332040836
PS-901856: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-33-211-4007
Mounting Plate

332114007
906 771: RNCC: 3 | RNVC: 2
SAD 92: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-33-157-8011
Mending Plate

331578011
691888: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-2843
Retaining Strap

330032843
721023646: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-201-2509
Retaining Strap

332012509
1025-900969: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-157-8680
Angle Bracket

331578680
813326: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-2432
Mending Plate

330002432
3110430620: RNCC: 1 | RNVC: 2
5320000439: RNCC: 3 | RNVC: 2
3110430620: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-181-8289
Angle Bracket

331818289
-10200286-3: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-114-4028
Clamping Catch

331144028
WN 300308-U: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-6738
Mounting Bracket

330036738
2510003407: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-204-3027
Webbing Strap

332043027
13878-86CA0: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-33-201-1941
Pipe Hanger

332011941
C537C1142201: RNCC: 3 | RNVC: 2

30 May 2002

5340-33-000-6937
Loop Clamp

330006937
537120: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-204-7073
Roller Holder

332047073
40201655100: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-33-001-4439
Compression Cup

330014439
92026325: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-5687
Mending Plate

331545687
751852: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-116-7043
Mending Plate

331167043
100.949.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-9316
Mounting Plate

331059316
271361: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-33-205-0370
Mounting Plate

332050370
0224130: RNCC: 3 | RNVC: 2

17 Apr 2006

5340-33-000-9866
Lock-Release Lever

330009866
35-22070-2501: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-203-7025
Access Cover

332037025
999008881: RNCC: 3 | RNVC: 2
999008881: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-204-9039
Mounting Plate

332049039
27640-29F11: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-002-9803
Door Handle

330029803
0138141: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-106-3190
Rod End Clevis

331063190
L13001: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-105-9702
Retaining Strap

331059702
880301177: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-203-3395
Webbing Strap

332033395
5036346: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-157-8608
Angle Bracket

331578608
805684: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-5215
Access Cover

331555215
682869: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-156-2338
Angle Bracket

331562338
-62201-G970X: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-181-8081
Retaining Strap

331818081
-09100416-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-3606
Utility Access Door

332083606
CF 209 082 - X: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-33-157-0196
Access Cover

331570196
-77100015-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-7597
Mounting Bracket

332047597
5037213: RNCC: 3 | RNVC: 2
1.124.11.054: RNCC: 5 | RNVC: 2

11 Jan 2006

5340-33-160-3770
Plug Button

331603770
95.603.936: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-1302
Retaining Strap

331041302
W290622593100: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-33-155-7468
Mending Plate

331557468
313976: RNCC: 3 | RNVC: 2
313976: RNCC: 5 | RNVC: 9

18 Oct 1990

5340-33-106-4527
Turnbuckle

331064527
-13070-21002: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-33-108-4464
Mounting Bracket

331084464
9644.251.6680: RNCC: 3 | RNVC: 2
2540001394: RNCC: 5 | RNVC: 2
2540001394: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-4309
Mounting Plate

332004309
7063.252.0084: RNCC: 3 | RNVC: 2
2540700103: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-108-4445
Mounting Bracket

331084445
9644.250.6155: RNCC: 3 | RNVC: 2
2540001211: RNCC: 5 | RNVC: 2
2540001211: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-157-8455
Access Cover

331578455
754196: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3217
Access Cover

332013217
165059: RNCC: 3 | RNVC: 2

24 Jun 2002

5340-33-107-6457
Mounting Bracket

331076457
7356.252.4280: RNCC: 3 | RNVC: 2
2510700808: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-156-5050
Loop Clamp

331565050
-46289-G2501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-3214
Angle Bracket

332113214
TP252806: RNCC: 3 | RNVC: 2

7 Sep 2013

5340-33-001-4177
Retaining Strap

330014177
92023129: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-155-7542
Mending Plate

331557542
738557: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-4340
Support Hook

332044340
P03040: RNCC: 3 | RNVC: 2
500006007: RNCC: 5 | RNVC: 2

14 Sep 2005

5340-33-200-9838
Angle Bracket

332009838
2510011076: RNCC: 3 | RNVC: 2
2510011076: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-4763
Angle Bracket

330014763
92026792: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-154-7492
Butt Hinge

331547492
810509: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-4170
Access Cover

330014170
92023122: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-5486
Angle Bracket

330015486
92040704: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-108-3614
Loop Clamp

331083614
-01556-1101M: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-157-7311
Blank Panel

331577311
320321: RNCC: 3 | RNVC: 2
320321: RNCC: 3 | RNVC: 2

11 Jul 1995

Load More Results