What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 13 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 13 of 39

5340-33-114-4753
Access Cover

331144753
5TG 5-223: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-211-2179
Angle Bracket

332112179
TP252670: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-200-1072
Access Cover

332001072
7063.252.0400: RNCC: 3 | RNVC: 2
2510701232: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-107-9363
Mounting Bracket

331079363
318535: RNCC: 3 | RNVC: 2

26 Sep 2000

5340-33-205-2697
Mounting Plate

332052697
CBD50524P14: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-33-001-3949
Angle Bracket

330013949
92020523: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-106-4611
Retaining Strap

331064611
0120060: RNCC: 3 | RNVC: 2
ALMCTI-1000000120060: RNCC: 5 | RNVC: 1

5 Mar 1998

5340-33-203-9399
Flange Protector

332039399
PS-210128: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-33-001-1930
Mounting Bracket

330011930
35-66100-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0828
Mounting Bracket

330010828
35-46444-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-115-9574
Retaining Strap

331159574
6.324.4.977.004.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9744
Access Cover

331159744
6.987.0.181.003.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-7736
Mounting Bracket

332007736
9DVC041201: RNCC: 3 | RNVC: 2

11 Mar 2002

5340-33-161-3299
Access Cover

331613299
528411: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7067
Retaining Band

330007067
750286: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-158-2237
Retaining Clip

331582237
0216529-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-9312
Bumper

331559312
556872: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-105-8961
Handle Grip

331058961
5340.000256: RNCC: 3 | RNVC: 2

2 Jul 1996

5340-33-211-0089
Mounting Bracket

332110089
27424010: RNCC: 3 | RNVC: 2

10 May 2013

5340-33-001-3298
Compression Cup

330013298
92012140: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-108-0206
Rigid Caster

331080206
9644.251.5986: RNCC: 3 | RNVC: 2
2540900244: RNCC: 5 | RNVC: 2
2540900244: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-204-9651
Mounting Plate

332049651
0223421: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-33-106-9396
Retaining Strap

331069396
4730000512: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-004-3157
Retaining Clip

330043157
77 00 729 283: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-202-7653
Angle Bracket

332027653
709051504: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-33-145-6111
Mounting Plate

331456111
TAB. B1-30: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-8121
Door Handle

330028121
0004459893: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-004-2665
Mounting Bracket

330042665
1055-001497: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-108-2708
Mounting Bracket

331082708
9644.251.0492: RNCC: 3 | RNVC: 2
2510901059: RNCC: 5 | RNVC: 2
2510901059: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-157-7890
Access Cover

331577890
634279: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-116-8094
Threaded Rod End

331168094
01.00124/01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-6152
Mounting Bracket

332056152
CHD-11190001-01: RNCC: 3 | RNVC: 2

16 Jan 2007

5340-33-200-8578
Plain Solid Disk

332008578
7057.252.0095: RNCC: 3 | RNVC: 2
2510700587: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-200-4411
Mounting Plate

332004411
WW 258 039 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-107-7370
Access Cover

331077370
325139: RNCC: 3 | RNVC: 2
325139: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-187-3176
Access Cover

331873176
547334: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-6665
Angle Bracket

331816665
-03500513-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-9934
Access Cover

332029934
723551370-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-155-4532
Access Cover

331554532
571458: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-203-1827
Webbing Strap

332031827
9673.250.5908: RNCC: 3 | RNVC: 2
2540901434: RNCC: 5 | RNVC: 2
2540901434: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-004-5219
Access Cover

330045219
993046: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-116-0898
Mounting Bracket

331160898
13494000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-5021
Rigid Caster

332005021
19517200: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-203-9559
Access Cover

332039559
SP-337-M BR51/20-09 ITEM 12: RNCC: 3 | RNVC: 2
33R272418: RNCC: 5 | RNVC: 1
REP-702 ITEM 3260: RNCC: 5 | RNVC: 2

28 Jan 2005

5340-33-001-3883
Angle Bracket

330013883
92020264: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-000-7806
Leather Strap

330007806
526200060500000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-209-4658
Utility Guard Rail Section

332094658
0663.40.9000.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-154-2223
Mending Plate

331542223
573356: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-105-9216
Mounting Plate

331059216
271362: RNCC: 3 | RNVC: 2

12 Oct 1996

5340-33-200-5904
Mounting Plate

332005904
WG 423 217: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-206-0404
Angle Bracket

332060404
NN60962P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-211-2969
Support Hook

332112969
SP08755: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-000-9761
Mending Plate

330009761
35-21089-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-5670
Access Cover

332025670
II6650-2VO3-080: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-33-107-0845
Rim Lock

331070845
6317200935: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-161-3212
Mending Plate

331613212
521320: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-7514
Door Closer

332017514
500006008: RNCC: 3 | RNVC: 2
AMIV471041: RNCC: 3 | RNVC: 2

21 Oct 2002

5340-33-211-1194
Webbing Strap

332111194
0237751: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-201-3943
T Bracket

332013943
A2811730-003: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-001-1162
Mounting Bracket

330011162
35-49111-0005: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-154-6501
Loop Clamp

331546501
3090212011: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-157-8157
Angle Bracket

331578157
735898: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-0441
Access Cover

331020441
2510-000304: RNCC: 3 | RNVC: 2
411.717.7057: RNCC: 5 | RNVC: 2
2510000304: RNCC: 5 | RNVC: 2

14 Oct 1992

5340-33-002-0107
Padlock

330020107
60 E: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-202-9463
Runner

332029463
-76807-Y9500: RNCC: 3 | RNVC: 2

10 Dec 2003

5340-33-155-7497
Mending Plate

331557497
627120: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-1408
Mending Plate

332001408
9644.100.0107: RNCC: 3 | RNVC: 2
1005005316: RNCC: 5 | RNVC: 2
1005005316: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-33-160-7557
Plug Button

331607557
79.03.074.042: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-3950
Angle Bracket

330013950
92020524: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-104-7592
Bumper

331047592
7320.12301: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1855
Handwheel

332061855
CBD58505G23: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-206-2867
Mounting Plate

332062867
200763624: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-33-205-7383
Access Cover

332057383
709051375: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-33-160-3780
Plug Button

331603780
95.571.233: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0649
Loop Clamp

331160649
AC-15162030: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-4816
Bumper

331614816
682255: RNCC: 3 | RNVC: 2
682255: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-211-2979
Angle Bracket

332112979
TP252805: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-181-2864
Retaining Clip

331812864
SS-06-0311C: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-0822
Webbing Strap

332060822
120-1071-04: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-33-201-4796
Mending Plate

332014796
J57165120-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-161-2590
Mounting Bracket

331612590
2930000223: RNCC: 3 | RNVC: 2
317226: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-155-8968
Angle Bracket

331558968
312921: RNCC: 3 | RNVC: 2
312921: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-155-7756
Angle Bracket

331557756
739114: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-2790
Access Cover

331612790
125589.95: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-7413
Access Cover

331577413
515665: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0165
Mounting Bracket

331080165
9644.251.6440: RNCC: 3 | RNVC: 2
2540001317: RNCC: 5 | RNVC: 2
2540001317: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-106-4407
Mounting Bracket

331064407
32457: RNCC: 3 | RNVC: 2

29 Jan 1998

5340-33-188-8261
Access Door Hinge

331888261
6101038: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6721
Angle Bracket

332026721
5034133: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-003-7623
Permanent Magnet

330037623
0702551: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-201-4007
Angle Bracket

332014007
A2810480-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-202-9267
Mounting Bracket

332029267
DW 405 567 A: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-000-9976
Mounting Bracket

330009976
35-23405-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1636
Mounting Bracket

330011636
35-61117-0103: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-180-7655
Mounting Bracket

331807655
515506: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-105-2223
Bumper

331052223
-04200411-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-001-0843
Mounting Bracket

330010843
35-46511-0008: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-7805
Leather Strap

330007805
526200060400000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-001-0626
Mounting Bracket

330010626
35-46276-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-156-2204
Angle Bracket

331562204
-95812-G9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-155-7523
Mending Plate

331557523
737394: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-181-0287
Access Cover

331810287
-32160-C8050: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-0036
Mending Plate

330010036
35-32261-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-1578
Mounting Bracket

331031578
1005-005320: RNCC: 3 | RNVC: 2
1926: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-001-1440
Angle Bracket

330011440
35-54301-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-108-2109
Mending Plate

331082109
0640.100.0059: RNCC: 3 | RNVC: 2
1005004826: RNCC: 5 | RNVC: 2
1005004826: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-116-3162
Key Blank

331163162
5041.020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1646
Threaded Rod End

331161646
3 121 060: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-1825
Webbing Strap

332031825
9673.250.8210: RNCC: 3 | RNVC: 2
2540901431: RNCC: 5 | RNVC: 2
2540901431: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-160-3836
Mounting Plate

331603836
79.10.020.329: RNCC: 3 | RNVC: 2
91.512.268: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8693
Mechanical Stop

332038693
D56129: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-33-000-6996
Loop Clamp

330006996
783566: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-8816
Blank Panel

331578816
900118: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8609
Angle Bracket

332038609
NN60872P01: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-33-107-1823
Door Handle

331071823
300816: RNCC: 3 | RNVC: 2
300816: RNCC: 6 | RNVC: 9

6 Jul 1999

5340-33-001-3877
Detent Plunger

330013877
92020254: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-106-8185
Mounting Bracket

331068185
588551: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-107-1746
Loop Clamp

331071746
5975000861: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-107-3077
Access Cover

331073077
21124808000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-001-4212
Access Cover

330014212
92023701: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-3218
Retaining Clip

332003218
194375: RNCC: 3 | RNVC: 2

17 Dec 2001

5340-33-202-6114
Mounting Bracket

332026114
999101975: RNCC: 3 | RNVC: 2
999101975: RNCC: 5 | RNVC: 2

4 Sep 2003

5340-33-203-7116
Angle Bracket

332037116
NN60815P01: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-33-206-1738
Hook Handle

332061738
2009308: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-33-180-7378
Mounting Bracket

331807378
330348: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-108-2325
Mounting Bracket

331082325
0640.120.0130: RNCC: 3 | RNVC: 2
2510004581: RNCC: 5 | RNVC: 2
2510004581: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-205-7001
Access Cover

332057001
217ME730020: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-33-206-1872
Butt Hinge

332061872
92491040007: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-108-4380
Mounting Plate

331084380
9644.471.5041: RNCC: 3 | RNVC: 2
2510901236: RNCC: 5 | RNVC: 2
2510901236: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-202-6655
Mounting Bracket

332026655
9673.100.0034: RNCC: 3 | RNVC: 2
1005900295: RNCC: 5 | RNVC: 2
1005900295: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-203-2724
Cushioning Pad

332032724
9673.250.5994: RNCC: 3 | RNVC: 2
2540901533: RNCC: 5 | RNVC: 2
2540901533: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-200-3235
Access Cover

332003235
7053.252.0030: RNCC: 3 | RNVC: 2
2510700004: RNCC: 5 | RNVC: 2

17 Dec 2001

5340-33-116-4810
Threaded Rod End

331164810
10505002880: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-203-2957
Webbing Strap

332032957
5004916: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-33-157-0123
Access Cover

331570123
-74870-Y9553: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1048
Mounting Bracket

332001048
7063.252.0019: RNCC: 3 | RNVC: 2
2540700068: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-107-9959
Mounting Bracket

331079959
9644.250.2160: RNCC: 3 | RNVC: 2
1005005741: RNCC: 5 | RNVC: 2
1005005741: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-33-181-1119
Rod Retainer Clip

331811119
-20555-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-8866
Mounting Bracket

331068866
7356.252.2910: RNCC: 3 | RNVC: 2
2510011186: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-154-6939
Angle Bracket

331546939
750754: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-202-9329
Angle Bracket

332029329
CBD50517P03: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-204-9444
Mending Plate

332049444
0226689: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-33-106-5802
Pad Eye

331065802
1400301: RNCC: 3 | RNVC: 2
1400301: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-116-3260
Mounting Bracket

331163260
6898.002: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2226
Mechanical Stop

331892226
01060030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-005-3674
Mounting Bracket

330053674
7053.252.0146: RNCC: 3 | RNVC: 2
2510700397: RNCC: 5 | RNVC: 2

16 Jul 2001

5340-33-200-8934
Bow Handle

332008934
7562.252.0268: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-107-3022
Access Cover

331073022
21124319000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-206-0693
Angle Bracket

332060693
NN60978G01: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-33-103-0785
Mounting Bracket

331030785
1005-001863: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-4542
Retaining Clip

330024542
RC-3002: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-33-203-1499
Access Cover

332031499
9673.250.5970: RNCC: 3 | RNVC: 2
2540900570: RNCC: 5 | RNVC: 2
2540900570: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-205-5007
Angle Bracket

332055007
W280614901510: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-33-158-1844
Angle Bracket

331581844
507765: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-9662
Mounting Plate

332049662
0223423: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-33-000-6669
Retaining Strap

330006669
529107: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-105-1680
Rod Retainer Clip

331051680
1180214: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-108-4176
Mounting Bracket

331084176
9644.250.0637: RNCC: 3 | RNVC: 2
1005005953: RNCC: 5 | RNVC: 2
1005005953: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-206-3580
Mounting Bracket

332063580
120-1085-04: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-33-000-7498
Angle Bracket

330007498
698081: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-000-6950
Loop Clamp

330006950
563294: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-204-4090
Mounting Bracket

332044090
W280698406503: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-154-4931
Mounting Bracket

331544931
549992: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-001-5482
Access Cover

330015482
92040700: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-155-7770
Angle Bracket

331557770
731420: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-104-6563
Padlock

331046563
92.990.12.16.05: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-206-3535
Filler Opening Cap

332063535
4870 08 001: RNCC: 3 | RNVC: 2

23 Nov 2007

5340-33-200-3983
Mounting Plate

332003983
CF 826 028 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-204-7859
Access Cover

332047859
5037136: RNCC: 3 | RNVC: 2
1.124.92.056: RNCC: 5 | RNVC: 2

20 Jan 2006

5340-33-202-6039
Angle Bracket

332026039
630313: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-33-158-8633
Access Cover

331588633
-024304: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-3336
Mending Plate

330053336
180079: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-33-204-8312
Mechanical Stop

332048312
DF 413 317 AE: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-33-155-7524
Mending Plate

331557524
731762: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-160-7478
Retaining Clip

331607478
95.596.412: RNCC: 3 | RNVC: 2

28 Nov 1995

5340-33-106-5924
Mounting Bracket

331065924
1398051: RNCC: 3 | RNVC: 2
2990000467: RNCC: 5 | RNVC: 2
1398051: RNCC: 5 | RNVC: 2

4 Sep 1998

5340-33-002-8972
Handle Grip

330028972
1238200392: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-104-7575
Mending Plate

331047575
6720.12301: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-160-0156
Rod End Clevis

331600156
1806.09: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-157-7976
Angle Bracket

331577976
648544: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-9960
Access Cover

332059960
46669994: RNCC: 3 | RNVC: 2
46669994: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-33-211-6295
Angle Bracket

332116295
INS030300003000000: RNCC: 3 | RNVC: 2

12 Dec 2013

5340-33-107-8859
Pipe Hanger

331078859
120968: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-188-9825
Rod End Clevis

331889825
3 170 391: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-211-3004
Mounting Plate

332113004
5061557: RNCC: 3 | RNVC: 2
1.164.91.016: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-181-6644
Retaining Strap

331816644
-03500321-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-0859
Mounting Bracket

332030859
IT00100140: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-33-200-4252
Mounting Plate

332004252
BDL 120 BAS: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-33-005-1924
Mounting Bracket

330051924
SP07426: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-207-5972
Utility Access Door

332075972
CF 109 077 DU: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-33-200-6111
Access Cover

332006111
325143: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-181-0389
Loop Clamp

331810389
-15178-C8600: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8502
Access Cover

331578502
770211: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3723
Retaining Strap

330013723
92019328: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-3378
Angle Bracket

330013378
92014609: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-158-8636
Access Cover

331588636
-01201273-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0341
Mending Plate

331160341
(I): RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0969
Mounting Bracket

332060969
T130514: RNCC: 3 | RNVC: 2
07HMIR082: RNCC: 5 | RNVC: 2

6 Aug 2007

5340-33-157-7823
Angle Bracket

331577823
622795: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-4307
Mending Plate

331604307
95.589.877: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-6357
Access Hole Frame

331076357
7060.252.0250: RNCC: 3 | RNVC: 2
2510700240: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-108-2840
Mounting Plate

331082840
9644.251.0093: RNCC: 3 | RNVC: 2
5315002387: RNCC: 5 | RNVC: 2
5315002387: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-157-9422
Mending Plate

331579422
737703: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-9881
Access Cover

331579881
508813: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-2520
Access Door Hinge

332112520
10/12/149: RNCC: 3 | RNVC: 2

27 Jul 2013

5340-33-154-6515
Loop Clamp

331546515
312213: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-157-8093
Angle Bracket

331578093
730894: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2477
Plug Button

331072477
16799477: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-205-5984
Section Block Clamp

332055984
5029782: RNCC: 3 | RNVC: 2
1.108.22.013-A: RNCC: 5 | RNVC: 2

5 Jan 2007

5340-33-116-2310
Mounting Bracket

331162310
A-128.111: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4498
Webbing Strap

331084498
9644.251.6223: RNCC: 3 | RNVC: 2
2590900061: RNCC: 5 | RNVC: 2
2590900061: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-106-5195
Mounting Plate

331065195
021.40.70.20: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-33-203-8924
Mounting Bracket

332038924
1005002533: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-33-158-4325
Access Cover

331584325
519535: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3522
Mounting Bracket

330013522
92016040: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-5212
Access Cover

330045212
996339: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-204-4629
Angle Bracket

332044629
CBD58503P47: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-157-7562
Access Cover

331577562
550402: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-0285
Access Cover

331810285
-25117-G976X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-1172
Access Hole Frame

331811172
-16725-C6800: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-6078
Plain Solid Disk

331156078
92282230594: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-116-2309
Mounting Bracket

331162309
A-128.110: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0423
Mounting Plate

330020423
20030-0/0-CR01: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-106-0166
Loop Clamp

331060166
0301665-5: RNCC: 3 | RNVC: 2
3310961011: RNCC: 3 | RNVC: 2
0301665-5: RNCC: 5 | RNVC: 2

16 Nov 1996

5340-33-204-7295
Access Cover

332047295
800841-SE: RNCC: 3 | RNVC: 2
800841-SE: RNCC: 5 | RNVC: 2

22 Dec 2005

5340-33-154-9949
Bumper

331549949
08 30.058.900: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-6661
Mounting Bracket

330036661
1137.04.012: RNCC: 3 | RNVC: 2
1137.04.012: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-201-0170
Retaining Strap

332010170
2590900138: RNCC: 3 | RNVC: 2
2590900138: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-181-0151
Mending Plate

331810151
-10005-10G01: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-0656
Access Cover

331540656
520928: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-200-6109
Access Cover

332006109
325140: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-161-7038
Padlock

331617038
330/40: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-203-5407
Utility Access Door

332035407
R090508: RNCC: 3 | RNVC: 2
100333040030: RNCC: 5 | RNVC: 2
PCAMI/RP/06100333040030: RNCC: 5 | RNVC: 2

13 May 2004

5340-33-201-4042
Mending Plate

332014042
A2810498-401: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-187-5539
Loop Clamp

331875539
0201601-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-8225
Access Cover

331548225
1 125 884 156: RNCC: 3 | RNVC: 2
1.125.884.155: RNCC: 5 | RNVC: 9

13 Jun 1990

5340-33-003-2057
Bow Handle

330032057
4292 X 02 N: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-33-203-9728
Mounting Bracket

332039728
114385-77400: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-33-004-9617
Doorknob

330049617
8360990: RNCC: 3 | RNVC: 2
EN8360990: RNCC: 5 | RNVC: 2

26 Apr 2000

5340-33-004-1874
Flush Catch

330041874
230092150: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-005-3623
Mounting Bracket

330053623
021.04.02.01: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-157-8048
Angle Bracket

331578048
699791: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-158-2230
Retaining Clip

331582230
0216522-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-3933
Rod End Clevis

331023933
MDL-3-32: RNCC: 3 | RNVC: 2
MDL-3-32: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-8200
Utility Access Door

332018200
2540000603: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-202-6719
Corner Brace

332026719
5034184: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-200-6491
Hook Handle

332006491
230926: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-33-201-5270
Mounting Plate

332015270
9644.101.0700: RNCC: 3 | RNVC: 2
1005006623: RNCC: 5 | RNVC: 2
1005006623: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-115-8140
Access Cover

331158140
92095902716: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-180-7269
Angle Bracket

331807269
276511: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-180-7843
Mounting Plate

331807843
543254: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-9085
Door Handle

330029085
3777600159: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-8115
Access Cover

330018115
35-53410-0005: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-001-0039
Access Cover

330010039
35-32315-1101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0773
Mounting Bracket

330010773
35-46378-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-1996
Rod End Clevis

332061996
35-46117-0003: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-107-4062
Loop Clamp

331074062
W280677500009: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-33-105-1578
Mechanical Stop

331051578
40 646 064 66: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-204-4688
Webbing Strap

332044688
TT01441101: RNCC: 3 | RNVC: 2
4830740002: RNCC: 5 | RNVC: 2

19 Sep 2005

5340-33-103-4567
Mounting Bracket

331034567
4139 348 018: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-1496
Access Cover

332031496
9673.250.5980: RNCC: 3 | RNVC: 2
2540900571: RNCC: 5 | RNVC: 2
2540900571: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-107-1765
Loop Clamp

331071765
190826: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-107-1751
Loop Clamp

331071751
4730002346: RNCC: 3 | RNVC: 2
4730002346: RNCC: 3 | RNVC: 2
0639.280.1018: RNCC: 5 | RNVC: 2

1 Jul 1999

5340-33-203-4997
Angle Bracket

332034997
NN60592P01: RNCC: 3 | RNVC: 2

1 May 2004

5340-33-107-3080
Access Cover

331073080
21124809500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-156-2839
Access Door Hinge

331562839
-65400-C6000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-2295
Expansion Plug

331042295
X0650710: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-7651
Mounting Plate

332047651
5038431: RNCC: 3 | RNVC: 2
1.124.60.006.05.A: RNCC: 5 | RNVC: 2

12 Jan 2006

5340-33-161-5449
Angle Bracket

331615449
513717: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-200-3629
Mounting Bracket

332003629
322497: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-33-116-0654
Loop Clamp

331160654
BJ-15118000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-6434
Loop Clamp

331456434
TAB. C9-14: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3767
Mounting Plate

332043767
5034786: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-001-3807
Angle Bracket

330013807
92020140: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-211-2169
Angle Bracket

332112169
TP252669: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-200-9767
Runner

332009767
2510008366: RNCC: 3 | RNVC: 2
2510008366: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-203-7875
Swivel Caster

332037875
ETRS030411: RNCC: 3 | RNVC: 2

9 Oct 2004

5340-33-204-1751
Mounting Plate

332041751
9673.290.5035: RNCC: 3 | RNVC: 2
2910900067: RNCC: 5 | RNVC: 2
2910900067: RNCC: 5 | RNVC: 2

22 Apr 2005

5340-33-158-9758
Lever Bracket

331589758
2523.09: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4152
Mounting Bracket

332044152
W290698407500: RNCC: 3 | RNVC: 1

13 Sep 2005

5340-33-200-9750
Mounting Plate

332009750
2510008335: RNCC: 3 | RNVC: 2
2510008335: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-154-0268
Butt Hinge

331540268
807554: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-154-6543
Loop Clamp

331546543
638609: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-003-6665
Mounting Bracket

330036665
1137.05.032: RNCC: 3 | RNVC: 2
1137.05.032: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-108-0349
Mounting Bracket

331080349
7356.412.0080: RNCC: 3 | RNVC: 2
4130000008: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-33-155-9171
Mounting Bracket

331559171
312653: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-157-7922
Mending Plate

331577922
641856: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-204-0359
Loop Clamp

332040359
21935-85C00: RNCC: 3 | RNVC: 2
21935-85C00: RNCC: 5 | RNVC: 2

8 Feb 2005

5340-33-160-4305
Mending Plate

331604305
79.03.069.019: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-33-180-5507
Access Cover

331805507
127307: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-156-2187
Angle Bracket

331562187
-16419-Y9503: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-201-7874
Angle Bracket

332017874
NN60712G01: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-155-1734
Mounting Bracket

331551734
22,66.01: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-33-002-9882
Loop Clamp

330029882
0856557: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-4562
Compression Cup

330014562
92026520: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-0255
Butt Hinge

331540255
731366: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-206-4232
Handwheel

332064232
XX-000019009300: RNCC: 3 | RNVC: 2
000019009300: RNCC: 5 | RNVC: 2

4 Jan 2008

5340-33-200-8974
Mounting Bracket

332008974
W290698613000: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-33-201-6559
Access Cover

332016559
1413.1014.00.00: RNCC: 3 | RNVC: 2
1589990580000: RNCC: 5 | RNVC: 2

26 Sep 2002

5340-33-205-8839
Access Cover

332058839
1025901833: RNCC: 3 | RNVC: 2
9682.101.3055: RNCC: 5 | RNVC: 2

3 May 2007

5340-33-004-2835
Angle Bracket

330042835
NN60077P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-160-4322
Mending Plate

331604322
95.606.674: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6706
Mounting Bracket

330036706
2510001354: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-205-6541
Mounting Bracket

332056541
1025900729: RNCC: 3 | RNVC: 2
9682.101.2130: RNCC: 5 | RNVC: 2

1 Feb 2007

5340-33-157-0168
Access Cover

331570168
-74830-Y9551: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2129
Lever Bracket

331082129
9644.100.0310: RNCC: 3 | RNVC: 2
1005005175: RNCC: 5 | RNVC: 2
1005005175: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-108-1879
Mending Plate

331081879
571456: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-004-8205
Angle Bracket

330048205
NN60175P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-200-6199
Mounting Plate

332006199
IN-050-1977/78-E04I.CC12: RNCC: 3 | RNVC: 2

7 Feb 2002

5340-33-205-4967
Mounting Plate

332054967
INS0840/2002: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-33-187-5552
Loop Clamp

331875552
0201614-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-3960
Cushioning Pad

331023960
MB51-8-4: RNCC: 3 | RNVC: 2
MB51-8-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-7559
Plug Button

331607559
95.536.352: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-0649
Mounting Bracket

330010649
35-46289-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-7690
Retaining Strap

332007690
J92563450-401: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-33-001-0757
Mounting Bracket

330010757
35-46372-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-161-1883
Angle Bracket

331611883
5340-000645: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-155-6219
Access Cover

331556219
819356: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-154-6589
Retaining Band

331546589
319679: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-154-6591
Retaining Band

331546591
73960790: RNCC: 3 | RNVC: 2
739607: RNCC: 5 | RNVC: 9

4 Dec 1990

5340-33-004-5220
Access Cover

330045220
995496: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-001-3448
Detent Plunger

330013448
92014688: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-205-6552
Mounting Plate

332056552
1025901943: RNCC: 3 | RNVC: 2
9743.100.0346: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-33-104-0547
Mounting Plate

331040547
552583: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0008
Mounting Plate

331080008
9644.250.5551: RNCC: 3 | RNVC: 2
2540000657: RNCC: 5 | RNVC: 2
2540000657: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-154-8423
Access Cover

331548423
FA.004303.00: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-154-5535
Retaining Strap

331545535
323565: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-155-0604
Access Cover

331550604
7316174: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-116-1379
Mounting Plate

331161379
HI-11261100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1933
Mounting Bracket

330011933
35-66112-0601: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-160-6400
Mounting Bracket

331606400
75.529.986: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8992
Mending Plate

331578992
5340001059: RNCC: 3 | RNVC: 2
317219: RNCC: 3 | RNVC: 2
317219: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-5635
Metal Grille

332035635
80010301: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-200-1196
Mounting Bracket

332001196
316710: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-107-9245
Mounting Bracket

331079245
9644.250.2090: RNCC: 3 | RNVC: 2
2510008618: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-116-7041
Mending Plate

331167041
407.703: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-202-8202
Bow Handle

332028202
909409C500: RNCC: 3 | RNVC: 2

7 Nov 2003

5340-33-154-5679
Mending Plate

331545679
633273: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-180-7237
Access Cover

331807237
272713: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-3844
Bumper

330013844
92020220: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-107-4652
Angle Bracket

331074652
7356.252.4350: RNCC: 3 | RNVC: 2
2510011280: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-000-7055
Retaining Band

330007055
528703: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-116-3596
Loop Clamp

331163596
3617.022: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3792
Compression Cup

330013792
92020119: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-106-6856
Lock-Release Lever

331066856
3PP4083-6053P001: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-33-157-8050
Access Cover

331578050
711369: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-0912
Retaining Strap

332110912
95-54400-0301: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-33-001-1603
Angle Bracket

330011603
35-61016-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-103-2392
Mounting Plate

331032392
1055-000403: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5239
Access Cover

330045239
0455012-0: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-187-5535
Loop Clamp

331875535
0201408-4: RNCC: 3 | RNVC: 2
09401-11413: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-7673
Access Cover

331817673
-07101017-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-2212
Retaining Strap

331022212
41-1: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-116-2350
Strap Hinge

331162350
4-A-128.150: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-5202
Access Cover

330025202
212-51108-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-106-7428
Mounting Bracket

331067428
411.267.7101: RNCC: 3 | RNVC: 2
411.267.7101: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-157-5438
Angle Bracket

331575438
615476: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-9361
Threaded Rod End

331059361
16677: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-156-5033
Loop Clamp

331565033
-54614-C7600: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1570
Mounting Plate

332061570
100421000001: RNCC: 3 | RNVC: 2

7 Sep 2007

5340-33-108-5655
Cushioning Pad

331085655
9644.251.6086: RNCC: 3 | RNVC: 2
9330900007: RNCC: 5 | RNVC: 2
9330900007: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-156-2173
Angle Bracket

331562173
-11233-D9700: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-211-3319
Angle Bracket

332113319
0738001380: RNCC: 3 | RNVC: 2

20 Sep 2013

5340-33-001-0472
Mounting Bracket

330010472
35-46140-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-0337
Mending Plate

331160337
BL-11281020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-6249
Loop Clamp

332116249
21102: RNCC: 3 | RNVC: 2

12 Dec 2013

5340-33-003-6543
Access Cover

330036543
191127: RNCC: 3 | RNVC: 2
1278339003: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-106-1300
Mounting Plate

331061300
580773: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-33-155-7513
Mending Plate

331557513
600037: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-7273
Access Cover

331577273
318987: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-157-7561
Angle Bracket

331577561
549787: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4474
Lock-Release Lever

332004474
WW 358 670 AR: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-209-2668
Mounting Bracket

332092668
1025901455: RNCC: 3 | RNVC: 2
9682.101.4320: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-33-181-7285
Bridge Clamp

331817285
-06601223-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7737
Angle Bracket

331557737
313486: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-0464
Expansion Plug

331540464
3340802849: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-33-001-1560
Mounting Bracket

330011560
35-56242-0005: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-155-7522
Mending Plate

331557522
731639: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-5137
Mounting Bracket

330045137
03600256: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-209-4568
Utility Guard Rail Section

332094568
0663.20.3004.00: RNCC: 3 | RNVC: 2

26 Dec 2011

5340-33-157-8510
Mending Plate

331578510
770836: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-000-6716
Retaining Strap

330006716
800015: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-204-7860
Access Cover

332047860
5037132: RNCC: 3 | RNVC: 2
1.124.92.020: RNCC: 5 | RNVC: 2

20 Jan 2006

5340-33-106-9398
Webbing Strap

331069398
7356.252.0704: RNCC: 3 | RNVC: 2
2510011190: RNCC: 5 | RNVC: 2

7 Apr 1999

5340-33-203-5612
Utility Access Door

332035612
80020101: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-200-3626
Angle Bracket

332003626
322467: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-33-187-5598
Loop Clamp

331875598
0301159-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7077
Angle Bracket

330047077
NN60257: RNCC: 1 | RNVC: 2
NN60257P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-202-6723
Angle Bracket

332026723
5034186: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-107-9255
Mounting Bracket

331079255
7053.252.0016: RNCC: 3 | RNVC: 2
2510700041: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-154-6570
Door Handle

331546570
754036: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-116-2490
Mounting Plate

331162490
105.076.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-7961
Access Cover

331807961
56140: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-003-4032
Rod End Clevis

330034032
11.20374-2373: RNCC: 3 | RNVC: 2
11.20374-2373: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-108-5495
Mounting Plate

331085495
9644.251.5521: RNCC: 3 | RNVC: 2
2540001390: RNCC: 5 | RNVC: 2
2540001390: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-004-2018
Mounting Bracket

330042018
630083: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-155-7716
Angle Bracket

331557716
641345: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-3518
Mounting Bracket

332023518
W290609529000: RNCC: 3 | RNVC: 2

16 Apr 2003

5340-33-200-7184
Plain Solid Disk

332007184
IN-050A-MV01I.09: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-201-8241
Cushioning Pad

332018241
9330000225: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-200-1557
Pipe Hanger

332001557
95-46387-0001A01: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-33-116-5531
Access Cover

331165531
28434-ZE1-711: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3323
Retaining Strap

330013323
92012611: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-108-6997
Mounting Bracket

331086997
42320010400: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-33-109-8000
Bumper

331098000
Q 4 2050 8001: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-33-000-0621
Angle Bracket

330000621
6.325.0.982.007.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-188-9549
Access Cover

331889549
3 031 386: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1371
Rod End Clevis

332021371
5007284: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-105-1150
Bridge Clamp

331051150
544772: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-154-6946
Angle Bracket

331546946
753803: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-125-6669
Mounting Bracket

331256669
00170886: RNCC: 3 | RNVC: 2
00170886: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-106-2130
Access Cover

331062130
920185: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-004-6072
Mending Plate

330046072
75516219: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-33-211-6387
Utility Access Door

332116387
220121315: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-33-205-5857
Mounting Plate

332055857
5030296: RNCC: 3 | RNVC: 2
1.108.11.013-A: RNCC: 5 | RNVC: 2

27 Dec 2006

5340-33-201-0143
Mounting Plate

332010143
2540900532: RNCC: 3 | RNVC: 2
2540900532: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-108-2557
Mounting Plate

331082557
9644.251.0520: RNCC: 3 | RNVC: 2
2510009653: RNCC: 5 | RNVC: 2
2510009653: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-200-5036
Retaining Strap

332005036
19521306: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-000-7029
Loop Clamp

330007029
3090212249: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-126-9504
Mending Plate

331269504
4203144: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-201-4779
Access Cover

332014779
J52464031-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-001-2568
Mounting Bracket

330012568
CA82900-0102: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-108-1418
Access Cover

331081418
2 0045-211: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-33-188-9846
Compression Cup

331889846
3 170 299: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5172
Loop Clamp

331455172
205-040-156-3: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-203-3722
Mounting Plate

332033722
MM-2020: RNCC: 3 | RNVC: 2
186-4568: RNCC: 5 | RNVC: 2

24 Mar 2004

5340-33-115-8169
Access Cover

331158169
92275200973: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-107-0976
Loop Clamp

331070976
110732: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-157-8557
Angle Bracket

331578557
785282: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0003
Mounting Plate

331080003
9644.250.5559: RNCC: 3 | RNVC: 2
2540000637: RNCC: 5 | RNVC: 2
2540000637: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-200-5909
Access Cover

332005909
WW 321 527: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-161-5441
Door Handle

331615441
323538: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6593
Retaining Band

331546593
901310: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-002-2645
Rod End Connector

330022645
573485: RNCC: 3 | RNVC: 2
573485: RNCC: 5 | RNVC: 2
EN 573485: RNCC: 5 | RNVC: 2

18 Apr 1994

5340-33-000-7000
Loop Clamp

330007000
801644: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-004-5176
Angle Bracket

330045176
622325: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-200-1009
Mounting Bracket

332001009
SHL0030300: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-102-0783
Handle Grip

331020783
D-2-1-I: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-203-9954
Mounting Bracket

332039954
999005754: RNCC: 3 | RNVC: 2
999005754: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-201-8302
Mounting Bracket

332018302
9644.251.9160: RNCC: 3 | RNVC: 2
2540900402: RNCC: 5 | RNVC: 2
2540900402: RNCC: 5 | RNVC: 2

28 Oct 2002

5340-33-204-8969
Mounting Bracket

332048969
0850523020000: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-200-7770
Access Cover

332007770
BCL-020-A1I.24A: RNCC: 3 | RNVC: 2

11 Mar 2002

5340-33-104-0566
Handle Grip

331040566
1005-002099: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4956
Compression Cup

330014956
92027618: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-201-2195
Access Cover

332012195
A2810453-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-103-1145
Mounting Plate

331031145
375.093.3032: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1354
Mounting Plate

332021354
5007289: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-201-4063
Angle Bracket

332014063
A2810535-003: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-104-8041
Loop Clamp

331048041
4122200266: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-9209
Mounting Bracket

331559209
315273: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-200-9762
Mounting Bracket

332009762
2510008361: RNCC: 3 | RNVC: 2
2510008361: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-209-2611
Snap Hook

332092611
AHEPSMI1266: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-33-205-7377
Strap Hinge

332057377
TMAA020301: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-33-154-0252
Butt Hinge

331540252
571893: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-201-3165
Mounting Bracket

332013165
211248230000B: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-33-189-2289
Mounting Bracket

331892289
0350010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-2229
Mending Plate

331542229
592836: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-211-0278
Angle Bracket

332110278
TP252500: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-33-161-3385
Rod End Clevis

331613385
549077: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6520
Loop Clamp

331546520
317344: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-205-2466
Angle Bracket

332052466
CBD56501P60: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-105-1485
Access Cover

331051485
631 750 00 02: RNCC: 3 | RNVC: 2
631 750 00 02: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-126-3260
Loop Clamp

331263260
6.321.4.977.011.4: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-211-5022
Angle Bracket

332115022
J29165230-401: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-204-5411
Access Cover

332045411
703531009: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-002-0575
Mounting Bracket

330020575
C-20030-5/3-I-03-14: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-211-1500
Pipe Hanger

332111500
671-6-93-012.0Z: RNCC: 3 | RNVC: 2

28 Jun 2013

5340-33-181-3539
Retaining Clip

331813539
-01601088-0: RNCC: 3 | RNVC: 2
-01601088-1: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-115-9748
Access Cover

331159748
6.987.0.796.002.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8765
Mending Plate

331578765
818553: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-157-8991
Mending Plate

331578991
317214: RNCC: 3 | RNVC: 2
5340001057: RNCC: 3 | RNVC: 2
317214: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9027
Mending Plate

332009027
3465700085: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-33-106-1572
Access Cover

331061572
-01500699-0: RNCC: 3 | RNVC: 2

20 May 1997

5340-33-200-9973
Mending Plate

332009973
2510901438: RNCC: 3 | RNVC: 2
2510901438: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-116-3997
Mounting Bracket

331163997
610600724: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0564
Mending Plate

331540564
805859: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-204-4095
Access Cover

332044095
500.012.00: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-003-6544
Mounting Bracket

330036544
196251: RNCC: 3 | RNVC: 2
1278339004: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-107-5064
Mounting Bracket

331075064
9.302.1.620.001.5: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-003-0007
Door Handle

330030007
000019035500: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-106-5230
Loop Clamp

331065230
631 476 00 73: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-33-203-6139
Access Cover

332036139
203531700: RNCC: 3 | RNVC: 2

22 Jun 2004

5340-33-206-4087
Snap Hook

332064087
M81: RNCC: 3 | RNVC: 2

27 Dec 2007

5340-33-002-0886
Lock-Release Lever

330020886
2510005676: RNCC: 3 | RNVC: 2
311080: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-106-9082
Bridge Clamp

331069082
318861: RNCC: 3 | RNVC: 2

6 Apr 1999

5340-33-001-6840
Mounting Bracket

330016840
35-53342-0001: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-106-5626
Locking Stay

331065626
90450-04C27: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-200-3628
Mounting Bracket

332003628
322496: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-33-157-7429
Access Cover

331577429
521146: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6487
Loop Clamp

331546487
3090111811: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-108-0194
Angle Bracket

331080194
9644.251.5675: RNCC: 3 | RNVC: 2
2540900111: RNCC: 5 | RNVC: 2
2540900111: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-126-6190
Mounting Plate

331266190
PT17064: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5000
Loop Clamp

331565000
SS-06-0340G: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3412
Loop Clamp

332003412
RM-8/40-44: RNCC: 3 | RNVC: 2
92002204044: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-33-155-8978
Mending Plate

331558978
313419: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-107-4357
Mounting Plate

331074357
W290683106100: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-157-0117
Access Cover

331570117
-68260-Y9601: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7339
Loop Clamp

331577339
321372: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-4850
Catch Strike

330044850
203291: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-157-0125
Access Cover

331570125
-89410-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

Load More Results