What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 12 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 12 of 39

5340-33-004-8744
Loop Clamp

330048744
NN60163G01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-155-9163
Mounting Bracket

331559163
312485: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-004-9110
Threaded Rod End

330049110
35-46128-0005: RNCC: 3 | RNVC: 2

15 Feb 2000

5340-33-206-1416
Angle Bracket

332061416
2686-001: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-33-001-0712
Mounting Bracket

330010712
35-46352-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1794
Mounting Bracket

330011794
35-62537-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-211-3571
Butt Hinge Leaf

332113571
212-81425-02-1: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-33-104-7958
Access Cover

331047958
119-13-00-00: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-33-116-3547
Mending Plate

331163547
6330.061: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-4615
Mounting Plate

332054615
1025901957: RNCC: 3 | RNVC: 2
9743.100.0373: RNCC: 5 | RNVC: 2

19 Oct 2006

5340-33-211-6201
Mounting Bracket

332116201
D0921510114: RNCC: 3 | RNVC: 2

11 Dec 2013

5340-33-102-0681
Clamping Catch

331020681
19: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-001-4790
Retaining Strap

330014790
92026829: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-157-8512
Access Cover

331578512
770871: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1137
Rod End Clevis

330011137
35-49100-0601: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-2408
Mounting Plate

331032408
1055-000320: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6705
Door Holder

331546705
731488: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-002-9968
Retaining Clip

330029968
2072153: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-211-4088
Angle Bracket

332114088
62021204: RNCC: 3 | RNVC: 2

23 Oct 2013

5340-33-161-2563
Mounting Bracket

331612563
2510-004040: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-001-6471
Retaining Strap

330016471
35-43352-0001-00: RNCC: 3 | RNVC: 2
35-43352-0001: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-33-211-5025
Angle Bracket

332115025
J29165231-002: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-107-3870
Loop Clamp

331073870
ZC-92238280: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-202-7017
Mounting Bracket

332027017
9673.250.7830: RNCC: 3 | RNVC: 2
2510901906: RNCC: 5 | RNVC: 2
2510901906: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-000-6918
Loop Clamp

330006918
148232: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-211-5357
Bumper

332115357
UTE SP08900: RNCC: 3 | RNVC: 2

26 Nov 2013

5340-33-103-1221
Rod End Clevis

331031221
375.093.3136: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4176
Compression Cup

330014176
92023128: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-126-6189
Mounting Plate

331266189
PT17461: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-9053
Access Cover

331079053
9DVC041100: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-107-8766
Mounting Plate

331078766
7054.252.0166: RNCC: 3 | RNVC: 2
2510700853: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-33-003-2974
Mechanical Stop

330032974
212-21100-37-1: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-33-003-3555
Access Cover

330033555
11.12588-0044: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-000-0792
Rim Latch

330000792
97-50-361-11: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-000-0480
Retaining Band

330000480
CR17/75/CI: RNCC: 3 | RNVC: 2

26 May 1986

5340-33-145-5320
Mounting Bracket

331455320
74-606: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-202-5639
Threaded Rod End

332025639
95-21365-3901: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-200-0130
Mounting Bracket

332000130
NN60441P13: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-33-201-6122
Retaining Strap

332016122
320497: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-33-000-7025
Loop Clamp

330007025
3090202849: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-205-6120
Access Cover

332056120
1025900552: RNCC: 3 | RNVC: 2
9682.101.0344: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-200-7441
Access Cover

332007441
IN-050B-Q03I.23: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-33-002-9917
Retaining Clip

330029917
1216905: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-201-6362
Mounting Plate

332016362
222411452-01: RNCC: 3 | RNVC: 2

19 Sep 2002

5340-33-005-3449
Loop Clamp

330053449
3630-008: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-33-200-3263
Access Cover

332003263
223571522-01: RNCC: 3 | RNVC: 2
223571522-01: RNCC: 5 | RNVC: 2

18 Dec 2001

5340-33-201-9544
Mounting Plate

332019544
223591731-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-201-4361
Access Cover

332014361
223581204-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-000-9797
Mounting Bracket

330009797
35-21215-1101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-126-0611
Angle Bracket

331260611
0814-03: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-116-5520
Access Cover

331165520
11500-ZE1-610: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6727
Strap Hinge

330036727
2510003168: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-206-2014
Mounting Plate

332062014
CBD58505G73: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-107-8692
Hinged Hasp

331078692
PCAMI/RP/2400000103: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-106-6475
Angle Bracket

331066475
REM-25-3-16: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-33-211-4983
Block Clamp

332114983
J29167125-404: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-001-1072
Lock-Release Lever

330011072
35-46751-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0028
Mending Plate

330010028
35-32243-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-003-4176
Pipe Hanger

330034176
11.43386-0305: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-201-8947
Mounting Bracket

332018947
EN 220904-11: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-205-4425
Access Cover

332054425
5040993: RNCC: 3 | RNVC: 2
1.143.92.064: RNCC: 5 | RNVC: 2

29 Sep 2006

5340-33-201-4005
Angle Bracket

332014005
A2810455-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-114-4843
Split Tubular Clip

331144843
10 ILA 8-47: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-181-8464
Access Cover

331818464
-11900610-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-145-5282
Mounting Plate

331455282
80-026: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-002-4939
Hand Crank

330024939
212-46120-21-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-000-0451
Angle Bracket

330000451
H350GS/D102: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-001-0157
Loop Clamp

330010157
35-43127-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-2212
Access Door Hinge

332012212
A2810427-402: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-200-3994
Mounting Plate

332003994
CF 826 320 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-002-5002
Clamping Catch

330025002
CA38901-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-160-7536
Plug Button

331607536
79.03.074.165: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-6586
Rod End Clevis

331166586
15 M-17: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8740
Mounting Bracket

332038740
202202: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-33-201-2174
Utility Access Door

332012174
A2810424-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-202-9855
Access Cover

332029855
723553714-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-6541
Mounting Plate

332026541
223551395-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-201-9552
Mounting Bracket

332019552
223591105-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-200-3149
Mounting Bracket

332003149
28170104: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-33-102-0929
Retaining Strap

331020929
E-0-35: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-102-2213
Angle Bracket

331022213
45-2: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-004-2855
Mounting Bracket

330042855
NN60064P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-107-4700
Flush Catch Claw

331074700
6000487: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-154-9607
Door Handle

331549607
3936745: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-003-6703
Leather Strap

330036703
2510001344: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-155-0424
Mounting Bracket

331550424
TSR9: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-107-1314
Access Cover

331071314
610602233: RNCC: 3 | RNVC: 2
PCAMI/RP/0310602233: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-116-7048
Angle Bracket

331167048
A-128.124: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-2077
Mounting Bracket

331612077
2530-000260: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-204-7058
Mounting Bracket

332047058
PS-901370: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-33-115-8137
Access Cover

331158137
92095902429: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-003-4143
Retaining Strap

330034143
11.43284-0150: RNCC: 3 | RNVC: 2
11.43284-0150: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-106-6855
Flush Catch

331066855
4PB4122-1105P001: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-33-001-0016
Mounting Bracket

330010016
35-32062-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-106-3050
Access Cover

331063050
15487-1: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-116-6151
Angle Bracket

331166151
15-K-29: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-9619
Angle Bracket

331059619
8.007: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-33-187-5547
Loop Clamp

331875547
0201609-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2199
Mounting Plate

331052199
-14902208-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-002-0004
Mounting Bracket

330020004
35-63634-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-205-3716
Stand Base

332053716
EP.65000-24-3: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-33-001-6577
Rim Latch

330016577
35-22042-0201: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-116-8047
Lever Bracket

331168047
DSH-138: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-3439
Pipe Hanger

331073439
FIG.852-10 MM: RNCC: 3 | RNVC: 2
PCAMI/RP/0900001030: RNCC: 6 | RNVC: 9

27 Sep 1999

5340-33-115-8468
Angle Bracket

331158468
H8/225/PH/4/3: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-003-6538
Plug Button

330036538
1278332038: RNCC: 3 | RNVC: 2
196250: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-103-5147
Retaining Strap

331035147
1443-10-11: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-200-5920
Angle Bracket

332005920
WW 386 490 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-116-1589
Mounting Bracket

331161589
3 106 442: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1974
Stand Base

332061974
CBD58505P64: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-145-6439
Loop Clamp

331456439
TAB. C6-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8153
Access Cover

331158153
92277500387: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-116-8593
Mounting Bracket

331168593
598/50-14: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-2136
Access Door Hinge

331062136
683817: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-180-7328
Access Cover

331807328
303828: RNCC: 3 | RNVC: 2
303828: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-001-0970
Mounting Bracket

330010970
35-46653-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-181-5034
Loop Clamp

331815034
SS-06-0166V: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-3076
Rod End Clevis

332003076
35-23317-0209: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-33-002-0011
Mounting Bracket

330020011
35-63645-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-106-8874
Mounting Bracket

331068874
7356.252.0580/5: RNCC: 3 | RNVC: 2
2510009628: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-211-3001
Mounting Plate

332113001
5061552: RNCC: 3 | RNVC: 2
1.164.91.012: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-200-3660
Access Cover

332003660
C 6623 250: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-104-7550
Handle Grip

331047550
6730.020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-3692
Threaded Rod End

331073692
738563: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-108-2388
Mounting Bracket

331082388
9644.120.0150: RNCC: 3 | RNVC: 2
2510006476: RNCC: 5 | RNVC: 2
2510006476: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-108-0030
Mounting Plate

331080030
9644.251.5369: RNCC: 3 | RNVC: 2
2540001326: RNCC: 5 | RNVC: 2
2540001326: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-33-107-9289
Mounting Bracket

331079289
7057.252.0066: RNCC: 3 | RNVC: 2
2510700180: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-001-7417
Shelf Bracket

330017417
92026018: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-33-000-6978
Loop Clamp

330006978
761699: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-116-6389
Loop Clamp

331166389
28-30: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-001-4504
Access Cover

330014504
92026435: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-103-0895
Access Cover

331030895
411.091.1402: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-9397
Door Handle

331549397
4474198: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-154-5536
Retaining Strap

331545536
547069: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-157-0198
Access Cover

331570198
-48471-G970X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-9558
Access Cover

331059558
582791: RNCC: 3 | RNVC: 2
582791: RNCC: 5 | RNVC: 2

18 Sep 1996

5340-33-004-5238
Access Cover

330045238
176220: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-005-3248
Access Cover

330053248
776013: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-33-108-5543
Retaining Strap

331085543
9644.251.6128: RNCC: 3 | RNVC: 2
2540900346: RNCC: 5 | RNVC: 2
2540900346: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-116-3726
Plain Solid Disk

331163726
8990.008: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-5037
Loop Clamp

331815037
SS-06-0229G: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-1622
Mounting Bracket

330011622
35-61100-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-145-5616
Access Cover

331455616
85-432: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-160-5808
Mechanical Stop

331605808
95.536.955: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3365
Mounting Plate

332003365
4762821: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-33-161-4305
Mounting Plate

331614305
537687E1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8671
Angle Bracket

331578671
812674: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-6361
Access Cover

331456361
996457: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4492
Detent Plunger

332004492
WW 434 333 CU: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-108-2166
Access Cover

331082166
9644.100.0830: RNCC: 3 | RNVC: 2
1005005508: RNCC: 5 | RNVC: 2
1005005508: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-003-6772
Mounting Bracket

330036772
312433: RNCC: 3 | RNVC: 2
312433: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-108-2661
Mounting Bracket

331082661
9644.581.0030: RNCC: 3 | RNVC: 2
2510010823: RNCC: 5 | RNVC: 2
2510010823: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-000-7028
Loop Clamp

330007028
3090211849: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-107-1325
Rim Lock Set

331071325
61060280201: RNCC: 3 | RNVC: 2
PCAMI/RP/0306028021: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-102-2467
Mounting Bracket

331022467
1005-000954: RNCC: 3 | RNVC: 2
WK-W 9033.010101: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-33-180-6916
Loop Clamp

331806916
240087: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-4157
Access Cover

331084157
9644.810.0190: RNCC: 3 | RNVC: 2
1005003829: RNCC: 5 | RNVC: 2
1005003829: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-161-3407
Rod End Clevis

331613407
549434.95: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8461
Access Cover

331578461
754354: RNCC: 3 | RNVC: 2
500005802: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-204-4501
Rod End Connector

332044501
TOM0203311: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-154-4165
Loop Clamp

331544165
3090234049: RNCC: 3 | RNVC: 2
3090234049: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-107-4475
Retaining Strap

331074475
W280677500023: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-155-7742
Angle Bracket

331557742
616467: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-5320
Lock Bolt

331085320
9644.250.0409: RNCC: 3 | RNVC: 2
2510006802: RNCC: 5 | RNVC: 2
2510006802: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-004-2651
Access Door Hinge

330042651
730096337: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-107-3073
Mounting Plate

331073073
21124804500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-107-9742
Mounting Bracket

331079742
9644.251.6590: RNCC: 3 | RNVC: 2
2510010805: RNCC: 5 | RNVC: 2
2510010805: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-107-0840
Rim Lock

331070840
24255-G9500: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-210-3428
Utility Resilient Mount

332103428
SPS 020 140001: RNCC: 3 | RNVC: 2
016063: RNCC: 5 | RNVC: 2

10 Sep 2012

5340-33-108-2181
Mounting Plate

331082181
9644.100.0273: RNCC: 3 | RNVC: 2
1005005648: RNCC: 5 | RNVC: 2
1005005648: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-104-7577
Support Hook

331047577
6720.47301: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-7384
Access Cover

332057384
709051376: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-33-157-7952
Angle Bracket

331577952
646117: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-7958
Loop Clamp

331167958
DSH-339: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2864
Retaining Strap

330012864
CAN68089-2221: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-0806
Webbing Strap

332040806
00515010: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-33-201-0983
Lock-Release Lever

332010983
CE300020-2101: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-108-5346
Lock-Release Lever

331085346
9644.250.2070: RNCC: 3 | RNVC: 2
2510008539: RNCC: 5 | RNVC: 2
2510008539: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-205-0300
Hinge Torsion Bar

332050300
0309437: RNCC: 3 | RNVC: 2

10 Apr 2006

5340-33-202-2070
Angle Bracket

332022070
NN60668P01: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-004-8169
Handwheel

330048169
05.09.125.01.02.00: RNCC: 3 | RNVC: 2

5 Nov 1999

5340-33-106-8223
Access Cover

331068223
W280675300307: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-201-7205
Mounting Bracket

332017205
1025-901324: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-157-5403
Loop Clamp

331575403
3090510011: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-2235
Mending Plate

331542235
682864: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-106-5241
Bow Handle

331065241
631 760 02 60: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-33-000-7807
Leather Strap

330007807
526200060900000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-001-3967
Bumper

330013967
92020616: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-154-4159
Loop Clamp

331544159
4730001095: RNCC: 3 | RNVC: 2
3090216049: RNCC: 3 | RNVC: 2
3090216049: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-002-9766
Retaining Strap

330029766
6319971090: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-202-9155
Plain Solid Disk

332029155
1025-901805: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-33-107-0308
Access Door Hinge

331070308
C2030: RNCC: 3 | RNVC: 2
5400401120105: RNCC: 5 | RNVC: 2

25 May 1999

5340-33-205-4613
Mounting Plate

332054613
1025901938: RNCC: 3 | RNVC: 2
9743.100.0128: RNCC: 5 | RNVC: 2

19 Oct 2006

5340-33-202-6250
Mending Plate

332026250
9673.250.0469: RNCC: 3 | RNVC: 2
1005900552: RNCC: 5 | RNVC: 2
1005900552: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-181-0288
Access Cover

331810288
-32117-T8000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6246
Mounting Plate

332026246
9673.250.0365: RNCC: 3 | RNVC: 2
1005900404: RNCC: 5 | RNVC: 2
1005900404: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-004-8948
Block Clamp

330048948
NN58381P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-204-1844
Mounting Plate

332041844
2510903345: RNCC: 3 | RNVC: 2
2510903345: RNCC: 5 | RNVC: 2

27 Apr 2005

5340-33-001-3570
Angle Bracket

330013570
92018110: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-161-3306
Mending Plate

331613306
538067: RNCC: 3 | RNVC: 2
538067: RNCC: 3 | RNVC: 2
538067: RNCC: 6 | RNVC: 9

24 Jul 1995

5340-33-107-4492
Mounting Plate

331074492
W280682500004: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-33-003-4261
Access Door Hinge

330034261
159-725: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-204-3857
Mounting Bracket

332043857
PS-210088: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-33-002-9694
Retaining Clip

330029694
6318310183: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-187-5591
Loop Clamp

331875591
0301152-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3729
Vent Plug

331163729
9695.015: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4436
Mounting Plate

331074436
W290683631000: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-108-2212
Access Cover

331082212
9644.101.0024: RNCC: 3 | RNVC: 2
1005006340: RNCC: 5 | RNVC: 2
1005006340: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-3998
Mending Plate

331063998
-33174-C6200: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-33-158-9751
Mounting Bracket

331589751
00.157.141.08: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3523
Shelf Bracket

330013523
92016041: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-2685
Mending Plate

332022685
98153384: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-33-200-9834
Mounting Plate

332009834
2510010733: RNCC: 3 | RNVC: 2
2510010733: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-161-2353
Mounting Plate

331612353
5310-001957: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-116-7924
Access Cover

331167924
01.00384/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-1669
Angle Bracket

330051669
NN60191G01: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-33-157-8551
Angle Bracket

331578551
784267: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8454
Access Cover

331578454
754175: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5596
Access Cover

331065596
462444BA: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-33-001-9149
Expansion Shield

330019149
C-20050-2-0-I-09-9: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-001-1438
Mounting Bracket

330011438
35-54301-0203: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-190-5279
Access Cover

331905279
237.50: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-160-4344
Locking Stay

331604344
79.20.020.609: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-5543
Access Cover

332025543
W290684801100: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-33-001-3938
Access Cover

330013938
92020512: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-106-6024
Mounting Bracket

331066024
630531: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-203-4661
Loop Clamp

332034661
14201200130: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-33-201-0027
Access Cover

332010027
2510901808: RNCC: 3 | RNVC: 2
2510901808: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-200-5394
Webbing Strap

332005394
600000002830: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-203-0847
Mounting Bracket

332030847
1025-901887: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-33-154-7490
Strap Hinge

331547490
731928: RNCC: 3 | RNVC: 2
15100592: RNCC: 5 | RNVC: 9

3 Dec 1990

5340-33-106-7269
Mounting Bracket

331067269
AM81010100: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-154-6706
Door Holder

331546706
816242: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-204-4089
Access Cover

332044089
500.031.00: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-155-7494
Mending Plate

331557494
762899: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-205-5935
Mounting Plate

332055935
5030944: RNCC: 3 | RNVC: 2
1.108.11.027-A: RNCC: 5 | RNVC: 2

29 Dec 2006

5340-33-000-7070
Retaining Band

330007070
900461: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-154-8725
Access Cover

331548725
9 120 144 100: RNCC: 3 | RNVC: 2
9120144114: RNCC: 5 | RNVC: 2

13 Jun 1990

5340-33-203-1765
Mending Plate

332031765
067.G.03.02: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-33-200-4088
Loop Clamp

332004088
Q 314 176 116: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-102-1279
Access Cover

331021279
112219-W: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-102-5916
Mounting Plate

331025916
276-C: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-1242
Mounting Plate

330021242
5340-000630: RNCC: 3 | RNVC: 2

8 Jun 1993

5340-33-205-7050
Bumper

332057050
6686 025: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-33-102-2529
Butt Hinge

331022529
559-046903.1: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-201-4002
Angle Bracket

332014002
A2810451-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-001-1193
Mounting Bracket

330011193
35-49133-0203: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1338
Mounting Bracket

330011338
35-53173-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-6308
Loop Clamp

330006308
558673: RNCC: 1 | RNVC: 2

14 Jun 1988

5340-33-182-0072
Mending Plate

331820072
-78000013-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-9158
Mounting Bracket

331559158
312190: RNCC: 3 | RNVC: 2
312190: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-33-205-3644
Lock Bolt

332053644
5032361: RNCC: 3 | RNVC: 2
1.128.72.006: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-33-004-9081
Beam Gripping Clamp

330049081
0301951-4: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-33-187-2559
Retaining Strap

331872559
G2 PIT 13,5: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-9978
Snap Hook

332029978
05741/555: RNCC: 3 | RNVC: 2

19 Dec 2003

5340-33-211-2960
Angle Bracket

332112960
SP08554: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-116-0932
Shimmy Damper

331160932
BA-12327000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4433
Compression Cup

330014433
92026319: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-203-3023
Access Cover

332033023
9673.250.5800: RNCC: 3 | RNVC: 2
2540900572: RNCC: 5 | RNVC: 2
2540900572: RNCC: 5 | RNVC: 2

25 Feb 2004

5340-33-116-1367
Retaining Strap

331161367
CA-15163000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-166-0439
Access Cover

331660439
NM-4623: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-6974
Angle Bracket

332016974
TOM0818806: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-33-157-8199
Blank Panel

331578199
738520: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3000
Rod End Clevis

331613000
3031601212: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-5623
Mounting Plate

332035623
80010109: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-155-9208
Mounting Bracket

331559208
315180: RNCC: 3 | RNVC: 2
315180: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-33-001-4724
Lock-Release Lever

330014724
92026741: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-002-9018
Loop Clamp

330029018
3093211833: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-2150
Angle Bracket

330012150
35-72500-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-2045
Access Door Hinge

332002045
J57166336-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-001-6096
Retaining Strap

330016096
HD-1300-RAYAL-8: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-203-3535
Rod End Clevis

332033535
CS-EF2-AG1040904-2: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-33-187-5532
Loop Clamp

331875532
0201405-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-9968
Mechanical Stop

331069968
-01606055-0: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-107-8664
Buckle

331078664
300HN13040: RNCC: 3 | RNVC: 2
PCAMI/RP/2605830492: RNCC: 6 | RNVC: 9

10 Jul 2000

5340-33-126-4355
Mounting Bracket

331264355
S22717-N1000-B405: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9579
Snap Hook

332009579
701-30: RNCC: 3 | RNVC: 2
5340900002: RNCC: 5 | RNVC: 2

18 Apr 2002

5340-33-201-4212
Angle Bracket

332014212
A2811812-401: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-33-202-9837
Mounting Plate

332029837
723552762-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-001-0993
Mounting Bracket

330010993
35-46688-0005: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-3931
Expansion Plug

330013931
92020347: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-155-6396
Angle Bracket

331556396
544986.61: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-189-1780
Access Cover

331891780
02290010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-136-5021
Elastic Strap

331365021
SCH-MB1-TOA-113: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-33-001-1604
Angle Bracket

330011604
35-61016-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-5196
Buckle

332005196
19582015: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-206-2101
Rod End Clevis

332062101
35-42323-0003: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-33-204-3992
Turnbuckle

332043992
44-1/2-CANCAMO-OVALADO-HORQUILLA: RNCC: 3 | RNVC: 2
BS-33P024719: RNCC: 5 | RNVC: 2
4030-33-P02-4719: RNCC: 6 | RNVC: 9

8 Sep 2005

5340-33-203-6866
Utility Access Door

332036866
2123010210: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-200-9783
Access Cover

332009783
2510008485: RNCC: 3 | RNVC: 2
2510008485: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-104-7258
Angle Bracket

331047258
N2020604: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6581
Mounting Plate

330036581
196928: RNCC: 3 | RNVC: 2
4139306305: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-001-3682
Compression Cup

330013682
92019218: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-2238
Mending Plate

331542238
690935: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-116-8390
Retaining Clip

331168390
XA: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-4154
Loop Clamp

331544154
3090213949: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-204-3123
Retaining Strap

332043123
706200338: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-205-9693
Mounting Plate

332059693
M18-A7300-0001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-33-000-9687
Access Cover

330009687
35-13325-0701: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-2165
Access Cover

331082165
9644.100.0810: RNCC: 3 | RNVC: 2
1005005507: RNCC: 5 | RNVC: 2
1005005507: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-200-0209
Webbing Strap

332000209
1804/8-2-1209: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-204-5290
Door Hook And Eye

332045290
95-23316-0003: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-33-103-0913
Loop Clamp

331030913
411.090.0573: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-2864
Retaining Strap

330032864
721021001: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-002-9199
Retaining Strap

330029199
6159970190: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-158-8645
Access Cover

331588645
-01201474-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0966
Loop Clamp

331070966
41379: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-203-8347
Angle Bracket

332038347
NN60852P01: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-33-107-1798
Retaining Strap

331071798
01500927-1: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-202-9260
Mounting Bracket

332029260
DW 101 434 B: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-189-1871
Turnbuckle

331891871
02260051: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-8655
Angle Bracket

332008655
7562.252.0265: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-126-6078
Bail Handle

331266078
F22029-V2576: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8413
Mounting Bracket

332008413
0640.120.0001: RNCC: 3 | RNVC: 2
2510004670: RNCC: 5 | RNVC: 2
2510004670: RNCC: 5 | RNVC: 2

4 Apr 2002

5340-33-154-0661
Access Cover

331540661
646596: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-005-0622
Section Block Clamp

330050622
NN60444G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-000-6712
Retaining Strap

330006712
781486: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-155-7514
Mending Plate

331557514
737329: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-5949
Retaining Strap

332005949
WW 488 342 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-206-1269
Mounting Bracket

332061269
632636: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-33-205-0780
Mending Plate

332050780
12773-24F00: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-161-2402
Access Cover

331612402
315453: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-203-8942
Access Cover

332038942
703696001: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-33-156-5030
Loop Clamp

331565030
-74430-G970X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-2806
Swivel Caster

332022806
S-165: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-33-200-6246
Access Cover

332006246
CE300020-2001: RNCC: 3 | RNVC: 2

8 Feb 2002

5340-33-204-4598
Section Block Clamp

332044598
CBD50503P18: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-211-2957
Mounting Bracket

332112957
SP08528: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-005-0604
Angle Bracket

330050604
NN60149P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-200-8029
Mounting Bracket

332008029
7057.252.0002: RNCC: 3 | RNVC: 2
2510700023: RNCC: 5 | RNVC: 2

13 Mar 2002

5340-33-003-6799
Mounting Bracket

330036799
316124: RNCC: 3 | RNVC: 2
316124: RNCC: 5 | RNVC: 2

27 May 1998

5340-33-201-1440
Angle Bracket

332011440
SP05889: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-001-4042
Angle Bracket

330014042
92021323: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-211-4679
Mechanical Stop

332114679
VR03304000: RNCC: 3 | RNVC: 2
VR03304000: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-004-8741
Angle Bracket

330048741
NN60116P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-201-4178
Butt Hinge

332014178
-57240-G9600: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-200-4715
Mounting Bracket

332004715
115.02.41: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-200-7960
Mounting Bracket

332007960
321937: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-201-5274
Mounting Plate

332015274
7644.100.0002: RNCC: 3 | RNVC: 2
1055001778: RNCC: 5 | RNVC: 2
1055001778: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-157-8155
Angle Bracket

331578155
735892: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5214
Access Cover

330045214
75221242/2: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-001-0029
Mending Plate

330010029
35-32244-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-2432
Mechanical Stop

331082432
9644.250.0557: RNCC: 3 | RNVC: 2
2510006957: RNCC: 5 | RNVC: 2
2510006957: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-000-7057
Retaining Band

330007057
550583: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-004-7076
Angle Bracket

330047076
NN60231: RNCC: 1 | RNVC: 2
NN60231P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-205-3149
Access Cover

332053149
40084010090: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-33-000-6672
Retaining Strap

330006672
552925: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-004-7899
Mounting Bracket

330047899
NN60082P02: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-33-160-3138
Rod End Clevis

331603138
116631050: RNCC: 3 | RNVC: 9

11 Jul 1995

5340-33-201-6245
Angle Bracket

332016245
9644.281.5112: RNCC: 3 | RNVC: 2
2930900049: RNCC: 5 | RNVC: 2
2930900049: RNCC: 5 | RNVC: 2

17 Sep 2002

5340-33-160-3682
Eye Hook

331603682
1670270: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-181-1415
Retaining Strap

331811415
-24222-22R00: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-0103
Padlock

330020103
58 C: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-200-4576
Retaining Strap

332004576
WW 486 822 A: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-107-1762
Loop Clamp

331071762
4730002543: RNCC: 3 | RNVC: 2
DIN 3016 D1 24X25 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-201-9064
Doorstop

332019064
212-21100-21.1: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-000-6681
Retaining Strap

330006681
567843: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-001-3819
Angle Bracket

330013819
92020153: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-211-1834
Mounting Bracket

332111834
VR05010200: RNCC: 3 | RNVC: 2
VR05010200: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-190-3869
Loop Clamp

331903869
1201: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-107-1098
Catch Strike

331071098
77 00 519 754: RNCC: 3 | RNVC: 2

29 Jun 1999

5340-33-000-7021
Loop Clamp

330007021
3090111411: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-6311
Loop Clamp

330006311
644318: RNCC: 3 | RNVC: 2
644318: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-33-202-6821
Mounting Bracket

332026821
9673.590.5039: RNCC: 3 | RNVC: 2
2510901633: RNCC: 5 | RNVC: 2
2510901633: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-126-4767
Loop Clamp

331264767
3615.43: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-154-3283
Mechanical Stop

331543283
3921024500: RNCC: 3 | RNVC: 2

7 Feb 1990

5340-33-107-9731
Mounting Bracket

331079731
9644.250.7970: RNCC: 3 | RNVC: 2
2510009322: RNCC: 5 | RNVC: 2
2510009322: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-003-5053
Access Cover

330035053
0638610: RNCC: 3 | RNVC: 2
0638616: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-155-6236
Access Cover

331556236
821119: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-000-6667
Retaining Strap

330006667
524512: RNCC: 1 | RNVC: 2
524512: RNCC: 3 | RNVC: 2
5340001086: RNCC: 3 | RNVC: 2

6 Sep 1988

5340-33-157-9047
Expansion Plug

331579047
320344: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-8391
Loop Clamp

331818391
-11500306-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-1497
Mounting Bracket

330011497
35-56143-0103: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-158-4329
Access Cover

331584329
580469: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-7912
Mounting Bracket

331077912
61.11.174: RNCC: 3 | RNVC: 2

12 Jun 2000

5340-33-154-7719
Synchro Clamp

331547719
643055.01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7719
Angle Bracket

331557719
690485: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-103-0758
Mounting Plate

331030758
2510-001029: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-7817
Access Cover

331817817
-07700466-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-4026
Mounting Plate

332054026
5040093: RNCC: 3 | RNVC: 2
1.143.31.067: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-204-8936
Mounting Bracket

332048936
51311-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-002-8743
Retaining Strap

330028743
265601K10: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-211-2938
Bow Handle

332112938
1270000231: RNCC: 3 | RNVC: 2

12 Aug 2013

5340-33-206-2022
Section Block Clamp

332062022
CBD58505P90: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-206-4592
Mounting Bracket

332064592
H081 1050: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-33-108-1911
Utility Access Door

331081911
98495211: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-155-5732
Door Handle

331555732
754360: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-103-1468
Access Cover

331031468
1005-004366: RNCC: 3 | RNVC: 2
2421: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-115-9262
Retaining Strap

331159262
DSH-333: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-2733
Plain Solid Disk

331022733
1005-001657: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-002-5036
Access Cover

330025036
212-13502-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-116-8650
Mounting Plate

331168650
598/9-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4247
Loop Clamp

331264247
C22136-N1000-C46: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-106-4293
Bow Handle

331064293
01210041: RNCC: 3 | RNVC: 2

29 Jan 1998

5340-33-000-0654
Access Cover

330000654
9.302.1.972.005.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-116-1356
Retaining Strap

331161356
AA-15161120: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-9252
Handle Grip

330029252
6312600040: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-103-1220
Turnbuckle

331031220
375.093.3275: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-3277
Angle Bracket

331063277
1288660: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-200-5082
Mending Plate

332005082
19527203: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-160-5774
Mechanical Stop

331605774
97.501.453: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-4755
Mounting Plate

330044755
712258: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-200-8031
Mounting Plate

332008031
7057.252.0019: RNCC: 3 | RNVC: 2
2510700135: RNCC: 5 | RNVC: 2

13 Mar 2002

5340-33-003-2908
Angle Bracket

330032908
721023781: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-157-8488
Angle Bracket

331578488
761654: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8608
Mounting Plate

332008608
7356.252.0627: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-004-2840
Angle Bracket

330042840
NN60091P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-211-2401
Mounting Bracket

332112401
IS-DMP02: RNCC: 3 | RNVC: 2
EI00695: RNCC: 5 | RNVC: 2

20 Jul 2013

5340-33-115-8160
Access Cover

331158160
92282218712: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-211-1847
Mounting Bracket

332111847
VR08020200: RNCC: 3 | RNVC: 2
VR08020200: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-205-9290
Angle Bracket

332059290
1025901993: RNCC: 3 | RNVC: 2
9743.100.0616: RNCC: 5 | RNVC: 2

21 May 2007

5340-33-002-0087
Mounting Bracket

330020087
291AS221-1: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-102-1626
Angle Bracket

331021626
MBCE-4-41: RNCC: 3 | RNVC: 2
MBCE-4-41: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-200-2057
Retaining Band

332002057
J57167681-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-201-6505
Mounting Bracket

332016505
1025-901045: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-187-3107
Rod End Clevis

331873107
558421: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7253
Blank Panel

331577253
318348: RNCC: 3 | RNVC: 2
318348: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-8315
Hinge Torsion Bar

332018315
313512: RNCC: 3 | RNVC: 2

29 Oct 2002

5340-33-204-7514
Mounting Plate

332047514
5038123: RNCC: 3 | RNVC: 2
1.124.60.050.04-A: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-202-6200
Access Cover

332026200
9673.100.0040: RNCC: 3 | RNVC: 2
1005900017: RNCC: 5 | RNVC: 2
1005900017: RNCC: 5 | RNVC: 2

12 Sep 2003

5340-33-204-6296
Mounting Plate

332046296
5030416: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-33-200-5055
Access Door Hinge

332005055
19523209: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-126-6110
Clamping Catch

331266110
C22123-N1000-C801: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-2031
Loop Clamp

331552031
3000-240203: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-200-3995
Mounting Plate

332003995
CF 826 321 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-004-9342
Angle Bracket

330049342
NN60284G01: RNCC: 3 | RNVC: 2

6 Mar 2000

5340-33-003-5059
Threaded Rod End

330035059
0848182: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-002-1576
Angle Bracket

330021576
921.203.05: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-203-7394
Expansion Plug

332037394
0141882941200: RNCC: 3 | RNVC: 2

15 Sep 2004

5340-33-192-3774
Retaining Strap

331923774
640.250: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-001-4711
Angle Bracket

330014711
92026728: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-106-8964
Angle Bracket

331068964
322857: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-161-2564
Access Cover

331612564
2510-004043: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-001-1811
Mounting Bracket

330011811
35-63071-0601: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-202-1635
Cushioning Pad

332021635
723561725-02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-181-8427
Mending Plate

331818427
-11500528-2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-2735
Mounting Plate

330042735
SE127128015 A: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-187-5542
Loop Clamp

331875542
0201604-7: RNCC: 3 | RNVC: 2
08014-84C50: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-108-4499
Webbing Strap

331084499
9644.251.6224: RNCC: 3 | RNVC: 2
2590900062: RNCC: 5 | RNVC: 2
2590900062: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-210-2817
Loop Clamp

332102817
191151950: RNCC: 3 | RNVC: 2
191151950: RNCC: 5 | RNVC: 2

19 Jul 2012

5340-33-107-0975
Loop Clamp

331070975
509727: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-160-6336
Mounting Bracket

331606336
95.553.920: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-5283
Access Cover

331905283
9207.160: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-0196
Retaining Strap

332010196
2910900097: RNCC: 3 | RNVC: 2
2910900097: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-002-0065
Retaining Band

330020065
35-94106-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-003-4171
Pipe Hanger

330034171
11.43386-0306: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-166-1410
Retaining Clip

331661410
661-130-420: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-9858
Mending Plate

332009858
2510900113: RNCC: 3 | RNVC: 2
2510900113: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-108-2180
Mounting Bracket

331082180
9644.100.1170: RNCC: 3 | RNVC: 2
1005005645: RNCC: 5 | RNVC: 2
1005005645: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-200-5169
Access Cover

332005169
325081: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-188-9134
Access Cover

331889134
4200141: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-200-3426
Mounting Plate

332003426
102 232/D: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-33-181-1168
Retaining Strap

331811168
-92553-C9400: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-9804
Door Handle

330029804
0138142: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-192-3780
Retaining Strap

331923780
141.160: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-1169
Angle Bracket

332001169
7059.252.0008: RNCC: 3 | RNVC: 2
2510700755: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-211-1828
Mounting Bracket

332111828
VR03401070: RNCC: 3 | RNVC: 2
VR03401070: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-004-1995
Locking Stay

330041995
746592: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-200-5692
Access Door Hinge

332005692
SPA800020: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-200-7229
Mounting Bracket

332007229
W290602000000: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-155-3693
Access Cover

331553693
193078: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-004-2190
Access Cover

330042190
759363: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-108-4182
Mounting Bracket

331084182
9644.250.1850: RNCC: 3 | RNVC: 2
1005006014: RNCC: 5 | RNVC: 2
1005006014: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-157-7490
Angle Bracket

331577490
537122: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-181-9697
Bow Handle

331819697
-60088250-R1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-4811
Catch Strike

331544811
136467: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-001-3888
Angle Bracket

330013888
92020269: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-205-2148
Extension Handle

332052148
CBD50509P80: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-211-4859
Snap Hook

332114859
MOSQUETON: RNCC: 3 | RNVC: 2

18 Nov 2013

5340-33-203-2722
Cushioning Pad

332032722
9673.250.5983: RNCC: 3 | RNVC: 2
2540901524: RNCC: 5 | RNVC: 2
2540901524: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-201-5658
Access Cover

332015658
125303: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-108-5333
Catch Strike

331085333
9644.810.0077: RNCC: 3 | RNVC: 2
2510007891: RNCC: 5 | RNVC: 2
2510007891: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-160-7528
Plug Button

331607528
79.03.074.217: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-7269
Expansion Plug

332007269
1 423 401 021: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-200-6407
Mounting Bracket

332006407
7562.252.0330: RNCC: 3 | RNVC: 2
2530000968: RNCC: 5 | RNVC: 2

14 Feb 2002

5340-33-204-4879
Access Cover

332044879
999005150: RNCC: 3 | RNVC: 2
999005150: RNCC: 5 | RNVC: 2

21 Sep 2005

5340-33-107-1822
Door Handle

331071822
385011101: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-115-9835
Rod End Clevis

331159835
101.603.00.01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-7181
Mounting Bracket

332017181
1025-900120: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-201-6485
Mounting Bracket

332016485
1025-901623: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-205-4383
Angle Bracket

332054383
19643002: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-33-154-0672
Door Holder

331540672
571194: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-004-2857
Angle Bracket

330042857
NN60134P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-205-8529
Mounting Bracket

332058529
2543-401: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-161-3294
Access Cover

331613294
527709: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-4639
Access Cover

331554639
584428: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-211-6369
Mounting Plate

332116369
53204-94117001: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-33-200-1312
Retaining Strap

332001312
324119: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-202-9999
Mounting Bracket

332029999
GUIVADZ63060X000: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-33-116-7955
Loop Clamp

331167955
DSH-332: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4658
Angle Bracket

332014658
J92563485-002: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-106-4583
Angle Bracket

331064583
5340000647: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-33-204-4957
Lock-Release Lever

332044957
F01A0367AG01: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-33-157-7943
Mending Plate

331577943
645185: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-107-7475
Mounting Plate

331077475
W290684071500: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-158-2241
Retaining Clip

331582241
0216533-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0000
Mounting Bracket

332030000
GUIVADZ63250X000: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-33-204-4641
Mounting Plate

332044641
J92563811-001: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-33-108-4267
Mounting Bracket

331084267
9644.250.2310: RNCC: 3 | RNVC: 2
2510008571: RNCC: 5 | RNVC: 2
2510008571: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-004-5234
Access Cover

330045234
9045-836: RNCC: 3 | RNVC: 2

14 Jun 1999

Load More Results