What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 10 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 10 of 39

5340-33-116-1344
Expansion Plug

331161344
BA-11262000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2091
Rod End Clevis

330012091
35-71202-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-155-7548
Mending Plate

331557548
746145: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-6954
Loop Clamp

330006954
575414: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-205-3721
Mechanical Stop

332053721
377: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-33-205-1004
Mounting Plate

332051004
TC10060110: RNCC: 3 | RNVC: 2

28 Apr 2006

5340-33-202-6945
Loop Clamp

332026945
9673.250.0248: RNCC: 3 | RNVC: 2
2510900781: RNCC: 5 | RNVC: 2
2510900781: RNCC: 5 | RNVC: 2

26 Sep 2003

5340-33-103-0781
Runner

331030781
3110-000091: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-1970
Rod End Clevis

331571970
-16900259-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5388
Furniture Cup

331065388
C0301061: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0301061: RNCC: 4 | RNVC: 1
030106B: RNCC: 5 | RNVC: 2
00300400743: RNCC: 5 | RNVC: 2

8 Apr 1998

5340-33-205-9692
Mounting Plate

332059692
M18-A3601-0001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-33-203-6628
Bumper

332036628
403051: RNCC: 3 | RNVC: 2
403051: RNCC: 5 | RNVC: 2
2815-33-M28-9170: RNCC: 6 | RNVC: 9

21 Jul 2004

5340-33-003-3002
Tee Hinge

330033002
10-25039-0001: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-33-102-3928
Handwheel

331023928
42320100760: RNCC: 3 | RNVC: 2
MBL1-3-7600: RNCC: 3 | RNVC: 2
MBL1-3-7600: RNCC: 3 | RNVC: 2
42320100760: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1422
Flush Catch

332061422
CAN66033S100D250: RNCC: 2 | RNVC: 2

4 Sep 2007

5340-33-203-8349
Angle Bracket

332038349
NN60670P01: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-33-102-3135
Strap Hinge

331023135
46-1: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-158-2226
Retaining Clip

331582226
0216514-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1845
Mounting Bracket

332111845
VR08010500: RNCC: 3 | RNVC: 2
VR08010500: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-003-3505
Loop Clamp

330033505
R508-E6X12: RNCC: 3 | RNVC: 2

25 Jun 1997

5340-33-108-1127
Handle Grip

331081127
5340001776: RNCC: 3 | RNVC: 2
DIN 98/E20/ALUMINIO: RNCC: 4 | RNVC: 1

28 Dec 2000

5340-33-001-0967
Mounting Bracket

330010967
35-46651-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-145-6032
Turnbuckle

331456032
052061: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4699
Doorknob

331074699
6000486: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-157-7283
Access Cover

331577283
319280: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-7719
Mounting Bracket

332017719
7055.252.0420: RNCC: 3 | RNVC: 2
2510701487: RNCC: 5 | RNVC: 2

22 Oct 2002

5340-33-210-1716
Utility Resilient Mount

332101716
TOM0409934: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-33-004-5145
Mounting Bracket

330045145
62200-G9800: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-161-3586
Mounting Bracket

331613586
581772: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-8605
Mounting Bracket

332038605
CBD50515G08: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-33-107-3899
Loop Clamp

331073899
-09100347-0: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-181-7579
Mechanical Stop

331817579
-06902600-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-6135
Mounting Bracket

331606135
79.03.097.549: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-9033
Mending Plate

331269033
25401023-4: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-157-2020
Rod End Clevis

331572020
-16900195-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3272
Mounting Bracket

331603272
1900360: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0466
Expansion Plug

331540466
3340803249: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-33-003-2831
Bow Handle

330032831
721022501: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-156-2368
Angle Bracket

331562368
-27175-G9601: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-116-2313
Mounting Bracket

331162313
A-128.281/14: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-0505
Plain Solid Disk

331060505
72D.HI/49/2: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-33-154-0450
Expansion Plug

331540450
806222: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-201-8199
Utility Access Door

332018199
2540000602: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-205-8558
Mounting Bracket

332058558
1000732-001: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-181-7489
Mechanical Stop

331817489
-06902346-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-5033
Loop Clamp

331815033
SS-06-0165V: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-5026
Retaining Strap

331815026
SS-06-0134G: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6929
Loop Clamp

330006929
513238: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-001-8914
Expansion Shield

330018914
C-20050-3-0-I-04-13: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-103-5150
Retaining Strap

331035150
1443-16-17: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-004-7629
Angle Bracket

330047629
-010235: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-107-4672
Loop Clamp

331074672
322839: RNCC: 3 | RNVC: 2
322839: RNCC: 5 | RNVC: 2

1 Dec 1999

5340-33-202-4918
Access Cover

332024918
722421725-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-202-4946
Bow Handle

332024946
722433816-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-202-9044
Mounting Plate

332029044
223551702-01: RNCC: 3 | RNVC: 2
223551702: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-103-0018
Mounting Bracket

331030018
919-4-13: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9047
Access Cover

332029047
223551708-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-181-8339
Mounting Plate

331818339
-11100262-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-0404
Turnbuckle Body

331020404
2510-000141: RNCC: 3 | RNVC: 2
2510000141: RNCC: 5 | RNVC: 2
411.090.0455: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-107-9103
Retaining Strap

331079103
18029: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-102-2739
Webbing Strap

331022739
378150: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-108-4457
Utility Access Door

331084457
9644.251.5190: RNCC: 3 | RNVC: 2
2540001260: RNCC: 5 | RNVC: 2
2540001260: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-202-7795
Mounting Plate

332027795
00160003: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-003-5128
Bridge Clamp

330035128
221407310: RNCC: 3 | RNVC: 2
EN221407-310: RNCC: 5 | RNVC: 9

14 Nov 1997

5340-33-201-7759
Retaining Strap

332017759
B34-13: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-158-1424
Mounting Bracket

331581424
501950: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-4930
Turnbuckle

332114930
40-5/8-GANCHO-CANCAMO: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-33-002-5044
Access Cover

330025044
212-11152-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-190-2542
Retaining Strap

331902542
3225: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-114-4759
Bumper

331144759
F-1150281: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-202-6548
Mounting Plate

332026548
222411499-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-001-4092
Door Hook

330014092
92021714: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-106-7329
Mending Plate

331067329
AM12030700: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-108-2659
Mounting Plate

331082659
9644.581.0001: RNCC: 3 | RNVC: 2
2510010821: RNCC: 5 | RNVC: 2
2510010821: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-203-1103
Utility Resilient Mount

332031103
202/15 TYPE A/TEMPSYL: RNCC: 3 | RNVC: 2

30 Jan 2004

5340-33-153-9666
Door Handle

331539666
111121: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-211-2952
Mounting Bracket

332112952
SP08500: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-200-3893
Bow Handle

332003893
CF 461 790 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-002-0105
Padlock

330020105
58 L: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-001-3447
Bumper

330013447
92014681: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-107-9970
Mounting Bracket

331079970
9644.250.2370: RNCC: 3 | RNVC: 2
1005006142: RNCC: 5 | RNVC: 2
1005006142: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-106-5153
Angle Bracket

331065153
-36440-Y9500: RNCC: 3 | RNVC: 2

23 Mar 1998

5340-33-116-3206
Loop Clamp

331163206
3616.008: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-6879
Mounting Bracket

332036879
2123050010: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-105-2391
Access Cover

331052391
-03902427-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-154-4930
Mounting Bracket

331544930
2940000059: RNCC: 3 | RNVC: 2
310433: RNCC: 3 | RNVC: 2
310433: RNCC: 5 | RNVC: 9

2 Oct 1990

5340-33-108-7019
Mounting Plate

331087019
7356.592.0046: RNCC: 3 | RNVC: 2
2510011256: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-126-5773
Rod End Connector

331265773
G59303-R-0500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-5807
Bumper

332035807
MF-GPR-63-4533: RNCC: 3 | RNVC: 2

1 Jun 2004

5340-33-206-3297
Loop Clamp

332063297
CA-56800-0601: RNCC: 3 | RNVC: 2

12 Nov 2007

5340-33-116-7843
Mending Plate

331167843
01.00112/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5762
Plug Button

331455762
73-450: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3012
Pipe Hanger

332003012
35-46388-0006A02: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-33-001-0651
Mounting Bracket

330010651
35-46291-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-003-3504
Loop Clamp

330033504
R508-E7X12: RNCC: 3 | RNVC: 2

25 Jun 1997

5340-33-001-9527
Access Cover

330019527
6302: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-108-0127
Mounting Bracket

331080127
0639.250.9926: RNCC: 3 | RNVC: 2
2530000389: RNCC: 5 | RNVC: 2
2530000389: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-115-8135
Access Cover

331158135
11202604610: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-000-2879
Access Cover

330002879
311696: RNCC: 1 | RNVC: 2
311696: RNCC: 3 | RNVC: 2
5340001026: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-200-6110
Access Cover

332006110
325141: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-002-9623
Butt Hinge

330029623
6317520651: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-203-6305
Mounting Bracket

332036305
213110802: RNCC: 3 | RNVC: 2
213110802: RNCC: 5 | RNVC: 2
3110-33-M28-7144: RNCC: 6 | RNVC: 9

10 Jul 2004

5340-33-116-3831
Mechanical Stop

331163831
EV-2318: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2285
Mounting Bracket

331032285
1055-000199: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-116-1375
Mounting Plate

331161375
BA-17164000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7996
Access Door Hinge

331067996
6.372-052.0-MEISA: RNCC: 3 | RNVC: 2
PCAMI/RP/1206372052: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-206-0813
Plug Button

332060813
48430 6K000: RNCC: 3 | RNVC: 2
48430-6K000: RNCC: 5 | RNVC: 2

27 Jul 2007

5340-33-115-8466
Angle Bracket

331158466
H8/225/PH/1/6: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-201-2980
Access Cover

332012980
222411510-01: RNCC: 3 | RNVC: 2
222411510-01: RNCC: 5 | RNVC: 2

20 Jun 2002

5340-33-202-9069
Mounting Plate

332029069
223552717-01: RNCC: 3 | RNVC: 2
223552717: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-155-6389
Loop Clamp

331556389
313388: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-5135
Turnbuckle Body

330045135
082912: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-001-4541
Compression Cup

330014541
92026473: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-206-2411
Mounting Plate

332062411
10-46395-0401: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-33-160-3804
Retaining Strap

331603804
79.10.009.311: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-5638
Detent Plunger

330015638
92041367: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-208-0477
Utility Guard Rail Section

332080477
0751020101: RNCC: 3 | RNVC: 2

28 Jan 2010

5340-33-160-0649
Retaining Band

331600649
00.213.458.07: RNCC: 3 | RNVC: 2

23 Nov 1995

5340-33-000-7473
Angle Bracket

330007473
533495: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-004-8737
Loop Clamp

330048737
NN58378P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-157-8040
Angle Bracket

331578040
699011: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0656
Mounting Plate

332050656
0227563: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-33-004-8401
Angle Bracket

330048401
NN51424P01: RNCC: 3 | RNVC: 2

13 Dec 1999

5340-33-154-4938
Mounting Bracket

331544938
739900: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-003-2833
Retaining Strap

330032833
721022626: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-116-7515
Angle Bracket

331167515
743426: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7143
Mounting Bracket

330047143
588259: RNCC: 3 | RNVC: 2

13 Sep 1999

5340-33-205-5000
Mounting Bracket

332055000
SP06553: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-33-205-3387
Access Cover

332053387
999001852: RNCC: 3 | RNVC: 2
999001852: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-33-200-1207
Angle Bracket

332001207
323546: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-206-0447
Catch Strike

332060447
-65612-9X000: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-33-116-8644
Mounting Plate

331168644
598/11-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-6980
Access Cover

331556980
754946: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-1457
Mounting Bracket

332041457
2540901465: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-33-102-1853
Mounting Bracket

331021853
52530001460: RNCC: 3 | RNVC: 2
MCL-5-32: RNCC: 3 | RNVC: 2
52530001460: RNCC: 3 | RNVC: 2
MCL-5-32: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-105-0629
Mounting Plate

331050629
PCT0035: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-155-6399
Angle Bracket

331556399
756481: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-5469
Angle Bracket

332005469
500398040: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-200-8270
Mounting Bracket

332008270
7061.252.0080: RNCC: 3 | RNVC: 2
2510700445: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-200-4278
Loop Clamp

332004278
4730700095: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-33-125-7089
Access Cover

331257089
604106588: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-205-5467
Angle Bracket

332055467
95-25942-0602: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-33-115-8786
Access Door Hinge

331158786
H8/225/PH/29/12: RNCC: 3 | RNVC: 2

3 Feb 1993

5340-33-202-7061
Mounting Bracket

332027061
9673.290.5034: RNCC: 3 | RNVC: 2
2910900046: RNCC: 5 | RNVC: 2
2910900046: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-188-7698
Loop Clamp

331887698
1420150: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-200-8886
Mounting Bracket

332008886
W290698446200: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-204-1490
Mounting Bracket

332041490
064.01.08.M01: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-33-155-2509
Access Cover

331552509
FD-970007.03: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-204-9034
Mounting Plate

332049034
35629-31F40: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-204-6130
Protection Bellows

332046130
PS-210191: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-33-001-8441
Expansion Shield

330018441
20050-577C: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-108-4358
Mounting Plate

331084358
9644.471.5032: RNCC: 3 | RNVC: 2
2510900127: RNCC: 5 | RNVC: 2
2510900127: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-154-6514
Loop Clamp

331546514
3090233849: RNCC: 3 | RNVC: 2
3090233849: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-107-8085
Retaining Strap

331078085
110204: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-200-5071
Mounting Plate

332005071
19525300: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-161-1350
Mounting Plate

331611350
05.215.617.XX: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-7205
Mechanical Stop

330027205
0014196: RNCC: 3 | RNVC: 2
NG0014196: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-203-9512
Access Cover

332039512
20880756: RNCC: 3 | RNVC: 2
33R277115: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-206-1965
Mounting Bracket

332061965
CBD58505P28: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-115-9282
Mounting Plate

331159282
01.00364/01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2187
Utility Access Door

332012187
A2810492-402: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-206-0055
Mounting Plate

332060055
W290615104500: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-33-108-4156
Access Cover

331084156
9644.810.0180: RNCC: 3 | RNVC: 2
1005003828: RNCC: 5 | RNVC: 2
1005003828: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-205-1969
Access Cover

332051969
95-21155-0001: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-33-155-7536
Mending Plate

331557536
770209: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-188-7795
Padlock

331887795
1110020: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-103-5005
Webbing Strap

331035005
CINTA PERSIANA: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-4531
Mounting Bracket

331034531
277999: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7052
Retaining Band

330007052
510551: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-153-9677
Door Handle

331539677
619433: RNCC: 3 | RNVC: 2
15100039: RNCC: 5 | RNVC: 9

4 Jan 1990

5340-33-000-1889
Loop Clamp

330001889
3040214249: RNCC: 1 | RNVC: 2
3090214249: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-203-5000
Angle Bracket

332035000
NN60669P01: RNCC: 3 | RNVC: 2

1 May 2004

5340-33-000-7486
Angle Bracket

330007486
577593: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-003-7275
Case Corner

330037275
4172-484: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-105-9663
Mechanical Stop

331059663
1.120.18.02.031: RNCC: 3 | RNVC: 2

21 Sep 1996

5340-33-200-5076
Mounting Plate

332005076
19526300: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-001-4059
Compression Cup

330014059
92021358: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-201-0231
Mending Plate

332010231
2990090023: RNCC: 3 | RNVC: 2
2990090023: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-200-9999
Access Cover

332009999
2510901469: RNCC: 3 | RNVC: 2
2510901469: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-202-7018
Mounting Bracket

332027018
9673.250.1590: RNCC: 3 | RNVC: 2
2510902294: RNCC: 5 | RNVC: 2
2510902294: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-105-2821
Loop Clamp

331052821
-16400156-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-200-0031
Hook Handle

332000031
230815: RNCC: 3 | RNVC: 2

14 Sep 2001

5340-33-203-0349
Mounting Bracket

332030349
1025-900204: RNCC: 3 | RNVC: 2

19 Jan 2004

5340-33-002-8889
Retaining Clip

330028889
0008310078: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-155-7481
Mending Plate

331557481
318523: RNCC: 3 | RNVC: 2
318523: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-7115
Loop Clamp

330047115
NRN50052G08: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-160-6012
Mounting Bracket

331606012
79.03.097.546: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7770
Mending Plate

331577770
596034: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4946
Mounting Bracket

331074946
W290684782500: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-200-8896
Mounting Bracket

332008896
W290698448000: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-001-3198
Retaining Strap

330013198
92010107: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-206-0107
Angle Bracket

332060107
40187400020: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-33-203-9745
Spring Tension Clip

332039745
3798116: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-33-004-2188
Rim Lock Set

330042188
75897813: RNCC: 3 | RNVC: 2
758978: RNCC: 5 | RNVC: 9
15100854: RNCC: 5 | RNVC: 9

3 Sep 1998

5340-33-157-8740
Access Cover

331578740
816604: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-9936
Butt Hinge

331589936
05.220.633.00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-107-3066
Access Cover

331073066
21124686000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-211-1522
Mounting Bracket

332111522
VR03401050: RNCC: 3 | RNVC: 2
VR03401050: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-002-4991
Rod End Clevis

330024991
CA38902-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-103-8659
Angle Bracket

331038659
M6-87.23.4: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-154-2224
Mending Plate

331542224
573408: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-108-2146
Angle Bracket

331082146
9644.100.0136: RNCC: 3 | RNVC: 2
1005005340: RNCC: 5 | RNVC: 2
1005005340: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-206-1369
Stand Base

332061369
46916: RNCC: 3 | RNVC: 2

31 Aug 2007

5340-33-005-0995
Mounting Plate

330050995
471.090.303: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-001-3562
Compression Cup

330013562
92018102: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-001-3751
Compression Cup

330013751
92019903: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-116-4426
Bridge Clamp

331164426
1336: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-106-4952
Door Holder

331064952
-80430-F3600: RNCC: 3 | RNVC: 2

9 Mar 1998

5340-33-157-7902
Angle Bracket

331577902
635698: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3797
Handwheel

332043797
2.25.231.00: RNCC: 3 | RNVC: 2
00423046: RNCC: 5 | RNVC: 2

29 Aug 2005

5340-33-126-5414
Access Cover

331265414
C22326-A1080-C1: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-161-4136
Mounting Bracket

331614136
739092: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7469
Mending Plate

331557469
318762: RNCC: 3 | RNVC: 2
318762: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-116-3211
Loop Clamp

331163211
4115.047: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3612
Bail Handle

330013612
92018238: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-201-0446
Sliding Block

332010446
5340001784: RNCC: 3 | RNVC: 2
5340001784: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-205-0590
Mounting Bracket

332050590
130275: RNCC: 3 | RNVC: 2

19 Apr 2006

5340-33-116-8293
Bridge Clamp

331168293
22 573: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-5964
Doorstop

331575964
619436: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-5687
Door Handle

331555687
751222: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-206-0397
Synchro Clamp

332060397
D0931411543: RNCC: 3 | RNVC: 2

9 Jul 2007

5340-33-115-9871
Metal Grille

331159871
116.130.03.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2869
Access Cover

331072869
122095: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-33-003-6646
Access Cover

330036646
1005002739: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-000-7483
Angle Bracket

330007483
567805: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-106-3622
Access Cover

331063622
589581: RNCC: 3 | RNVC: 2

16 Oct 1997

5340-33-188-8259
Access Door Hinge

331888259
6123019: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-2156
Utility Resilient Mount

332092156
13126-86CA0: RNCC: 3 | RNVC: 9

27 Jul 2011

5340-33-116-3595
Loop Clamp

331163595
3615.043: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-108-4353
Butt Hinge

331084353
9644.251.5835: RNCC: 3 | RNVC: 2
2510900071: RNCC: 5 | RNVC: 2
2510900071: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-187-9311
Access Cover

331879311
-3845002: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-3909
Bridge Clamp

332003909
CF 472 883 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-003-4407
Leather Strap

330034407
SP-00473: RNCC: 3 | RNVC: 2
SP00439: RNCC: 5 | RNVC: 1

5 Sep 1997

5340-33-107-3062
Access Cover

331073062
21124642000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-204-4525
Mounting Bracket

332044525
720302009: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-161-7014
Padlock

331617014
400/50: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-157-7758
Mending Plate

331577758
590325: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-2891
Retaining Clip

332062891
012933: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-33-204-7967
Rod End Clevis

332047967
5037143: RNCC: 3 | RNVC: 2
1.124.92.075: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-33-116-8597
Mounting Bracket

331168597
598/9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1545
Rod End Connector

330011545
35-56176-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-9640
Mounting Bracket

330019640
35-53167-0001-00: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-001-4214
Mounting Bracket

330014214
92023703: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-107-4664
Retaining Strap

331074664
7356.252.0868: RNCC: 3 | RNVC: 2
5340001794: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-201-2272
Metal Grille

332012272
2735.33.04: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-200-9730
Mending Plate

332009730
2510008307: RNCC: 3 | RNVC: 2
2510008307: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-002-9426
Handle Grip

330029426
6315450037: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-180-5615
Turnbuckle

331805615
155258: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-7855
Access Cover

331577855
630992: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9534
Blank Panel

332039534
055-12.01.01.M01: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-33-187-5604
Loop Clamp

331875604
0301165-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1051
Mounting Bracket

330011051
35-46732-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-0600
Retaining Strap

331080600
7356.101.0002: RNCC: 3 | RNVC: 2
1055700019: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-33-003-6707
Mounting Bracket

330036707
2510001355: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-004-2181
Access Cover

330042181
500005898: RNCC: 3 | RNVC: 2
758570: RNCC: 5 | RNVC: 9

3 Sep 1998

5340-33-001-4844
Retaining Strap

330014844
92027406: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-108-0538
Access Cover

331080538
9644.281.5160: RNCC: 3 | RNVC: 2
2990000453: RNCC: 5 | RNVC: 2
2990000453: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-205-0577
Mounting Bracket

332050577
0405950: RNCC: 3 | RNVC: 2

19 Apr 2006

5340-33-103-5151
Retaining Strap

331035151
1443-18-19: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-106-8285
Access Cover

331068285
588609: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-202-2568
Block Clamp

332022568
35-43343-0001: RNCC: 3 | RNVC: 2

14 Mar 2003

5340-33-001-3305
Compression Cup

330013305
92012147: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-005-3442
Bumper

330053442
1160722: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-33-154-0243
Butt Hinge

331540243
136087: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-204-6255
Bridge Clamp

332046255
5032949: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-33-003-2926
Bow Handle

330032926
721023316: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-190-2532
Retaining Strap

331902532
3222: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1259
Retaining Strap

332001259
324237: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-181-7829
Mending Plate

331817829
-07700587-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-4272
Mounting Plate

332044272
W280698402010: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-200-1667
Angle Bracket

332001667
28110703: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-157-8727
Blank Panel

331578727
815136: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-6439
Mounting Plate

331076439
7356.252.4020: RNCC: 3 | RNVC: 2
2510700211: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-108-4158
Access Cover

331084158
9644.810.0200: RNCC: 3 | RNVC: 2
1005003907: RNCC: 5 | RNVC: 2
1005003907: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-000-7508
Angle Bracket

330007508
785092: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-205-2099
Sliding Block

332052099
CBD50514P06: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-33-202-7108
Mounting Bracket

332027108
9673.250.7240: RNCC: 3 | RNVC: 2
2540901093: RNCC: 5 | RNVC: 2
2540901093: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-003-0573
Retaining Clip

330030573
7703081064: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-155-7547
Mending Plate

331557547
737330: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-0271
Butt Hinge

331540271
810515: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-188-8698
Access Cover

331888698
9.325.1.986.001.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-5167
T Bracket

332005167
324174: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-115-5130
Bumper

331155130
8798 990 017: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-205-8624
Lock Bolt

332058624
23-R: RNCC: 3 | RNVC: 2

23 Apr 2007

5340-33-202-2532
Plug Button

332022532
D0942510952: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-33-205-8714
Webbing Strap

332058714
02515040: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-33-001-0516
Mounting Bracket

330010516
35-46193-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-157-8085
Access Cover

331578085
716716: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4765
Loop Clamp

331264765
8545.49: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8001
Angle Bracket

331578001
683577: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-5701
Access Cover

331025701
222302114: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-003-3891
Rod End Clevis

330033891
11.20374-1996: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-108-2378
Mounting Plate

331082378
9644.120.0017: RNCC: 3 | RNVC: 2
2510006258: RNCC: 5 | RNVC: 2
2510006258: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-154-0277
Butt Hinge

331540277
820158: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-204-1379
Mounting Bracket

332041379
064.06.01.21.M03: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-33-116-8335
Mounting Bracket

331168335
22 512: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-002-9381
Handle Grip

330029381
6314270020: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-106-1856
Mounting Bracket

331061856
1777B4146/3.3.07: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-001-6094
Retaining Strap

330016094
HD-1300-RAYAL-1: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-204-9589
Bolt And Spacer Kit

332049589
31280-19F00: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-33-180-6913
Mounting Bracket

331806913
239710: RNCC: 3 | RNVC: 2
239710: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-154-4941
Mounting Bracket

331544941
807102: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-161-3637
Bumper

331613637
615495: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-003-7015
Access Cover

330037015
4110901220: RNCC: 3 | RNVC: 2
4110901220: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-003-4480
Access Cover

330034480
721023454: RNCC: 3 | RNVC: 2

16 Sep 1997

5340-33-108-2598
Angle Bracket

331082598
9644.251.0209: RNCC: 3 | RNVC: 2
2510010078: RNCC: 5 | RNVC: 2
2510010078: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-154-0248
Butt Hinge

331540248
515415: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-003-1093
Door Holder

330031093
90810-G9500: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-154-6929
Angle Bracket

331546929
321288: RNCC: 3 | RNVC: 2
321288: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-204-5362
Pipe Hanger

332045362
35-46386-0006A02: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-003-7304
Case Corner

330037304
8163-627: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-157-9409
Mounting Bracket

331579409
733054: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-2064
Pipe Hanger

331062064
-78200038-0: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-200-3624
Mounting Bracket

332003624
316451: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-33-154-6525
Loop Clamp

331546525
320338: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-157-7254
Blank Panel

331577254
318349: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-5706
Compression Cup

330015706
92042309: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-108-0013
Mounting Bracket

331080013
9644.250.7330: RNCC: 3 | RNVC: 2
2540000872: RNCC: 5 | RNVC: 2
2540000872: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-161-3145
Caster Frame

331613145
514196.95: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7045
Loop Clamp

330007045
3090224249: RNCC: 1 | RNVC: 2
3090224249: RNCC: 3 | RNVC: 2

9 Sep 1988

5340-33-203-1886
Mending Plate

332031886
9673.250.6014: RNCC: 3 | RNVC: 2
2540901556: RNCC: 5 | RNVC: 2
2540901556: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-33-205-3035
Access Cover

332053035
11360-29F50: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-003-3239
Flange Protector

330033239
221023915: RNCC: 3 | RNVC: 2

28 May 1997

5340-33-103-4532
Mounting Bracket

331034532
278000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-9780
Surface Bolt

331079780
9644.251.8900: RNCC: 3 | RNVC: 2
2590900012: RNCC: 5 | RNVC: 2
2590900012: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-126-1324
Access Cover

331261324
2515.87: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-001-3242
Retaining Strap

330013242
92011603: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-181-0284
Access Cover

331810284
-19243-C6800: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7726
Angle Bracket

331557726
750067: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-5879
Pipe Hanger

332045879
PCMSABMR046: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-33-108-0143
Mounting Bracket

331080143
0639.470.0730: RNCC: 3 | RNVC: 2
2540000674: RNCC: 5 | RNVC: 2
2540000674: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-203-2245
Doorstop

332032245
067.C02.01.04: RNCC: 3 | RNVC: 2
067.C02.03.04: RNCC: 5 | RNVC: 2

17 Feb 2004

5340-33-003-7031
Mounting Plate

330037031
317498: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-203-9798
Lock Spindle

332039798
PCAMI/RP/27A0501020: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-33-188-7437
Angle Bracket

331887437
9045-390D: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-107-4481
Angle Bracket

331074481
W280679500202: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-201-6850
Access Cover

332016850
100 100 17: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-154-5514
Retaining Strap

331545514
318606: RNCC: 3 | RNVC: 2
318606: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-206-4390
Handwheel

332064390
XX-000019005500: RNCC: 3 | RNVC: 2
000019005500: RNCC: 5 | RNVC: 2

16 Jan 2008

5340-33-103-0754
Access Cover

331030754
1005-001907: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6486
Thumb Latch

332026486
9673.250.0530: RNCC: 3 | RNVC: 2
2510900651: RNCC: 5 | RNVC: 2
2510900651: RNCC: 5 | RNVC: 2

22 Sep 2003

5340-33-201-4864
Elastic Strap

332014864
-89351-G970X: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-33-202-1372
Bail Handle

332021372
5023918: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-106-8860
Angle Bracket

331068860
320827: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-003-7032
Mounting Plate

330037032
317917: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-205-2427
Lever Bracket

332052427
CBD56501P36: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-158-4328
Access Cover

331584328
510168: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6711
Retaining Strap

330006711
781424: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-104-8067
Access Cover

331048067
753483: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0007
Mounting Bracket

330020007
35-63641-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-107-4433
Mounting Plate

331074433
W290683627300: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-000-7491
Angle Bracket

330007491
639866: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-106-3683
Swivel Caster

331063683
1892: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-158-1891
Access Cover

331581891
635473: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7460
Mending Plate

331557460
512142: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-8416
Access Cover

331558416
8380190126: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-155-7754
Angle Bracket

331557754
743359: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-7537
Mending Plate

331557537
753667: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-210-8347
Rod End Clevis

332108347
M361A1412204: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-33-201-0099
Access Cover

332010099
2540900184: RNCC: 3 | RNVC: 2
2540900184: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-161-3128
Mechanical Stop

331613128
512716: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-201-3557
Access Door Hinge

332013557
92492939022: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-201-4461
Mounting Bracket

332014461
W290684423000: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-33-203-1067
Lock-Release Lever

332031067
1025-901874: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-108-3615
Mounting Plate

331083615
-01601137-0: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-188-7513
Loop Clamp

331887513
6.0402.09.2.0001: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-205-2955
Bridge Clamp

332052955
09404-06429: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-005-1784
Access Cover

330051784
SP06567: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-192-3770
Retaining Strap

331923770
140.110: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-4401
Angle Bracket

330014401
92026264: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-106-6449
Loop Clamp

331066449
0816112: RNCC: 3 | RNVC: 2
0816112: RNCC: 5 | RNVC: 2

3 Dec 1998

5340-33-106-6525
Mending Plate

331066525
-85136-G9600: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-33-154-0260
Butt Hinge

331540260
814897: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-157-8156
Angle Bracket

331578156
735896: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4180
Expansion Plug

330014180
92023132: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-107-7439
Mounting Bracket

331077439
W290684023000: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-155-7532
Mending Plate

331557532
767335: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-3921
Access Cover

332003921
CF 485 280: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-108-2254
Access Cover

331082254
9644.101.0470: RNCC: 3 | RNVC: 2
1005006568: RNCC: 5 | RNVC: 2
1005006568: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-9932
Mounting Bracket

331069932
7356.412.0170: RNCC: 3 | RNVC: 2
4150032: RNCC: 5 | RNVC: 2
58141: RNCC: 5 | RNVC: 2

25 May 1999

5340-33-001-3872
Retaining Strap

330013872
92020249: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-206-1763
Stand Base

332061763
2003710: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-33-107-2483
Access Cover

331072483
20315910: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-204-7562
Mounting Bracket

332047562
5037574: RNCC: 3 | RNVC: 2
1.124.93.034: RNCC: 5 | RNVC: 2

10 Jan 2006

5340-33-002-0096
Padlock

330020096
40 E: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-204-3477
Bumper

332043477
PS-401016: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-33-206-4267
Mounting Bracket

332064267
XX-000019001500: RNCC: 3 | RNVC: 2
000019001500: RNCC: 5 | RNVC: 2

9 Jan 2008

5340-33-116-6385
Loop Clamp

331166385
10X18: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-1737
Mounting Bracket

330031737
1010-000140: RNCC: 3 | RNVC: 2

1 May 1996

5340-33-201-4307
Turnbuckle Body

332014307
1025-901377: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-116-7611
Loop Clamp

331167611
3090217010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0103
Mounting Bracket

332050103
19621430: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-155-7702
Angle Bracket

331557702
692059: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-211-2950
Mounting Bracket

332112950
SP08497: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-106-7457
Loop Clamp

331067457
98475751: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-102-2453
Runner

331022453
1005-000947: RNCC: 3 | RNVC: 2
WK-W 9033.0105: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-33-201-4230
Mounting Plate

332014230
A2810436-401: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-157-8019
Access Cover

331578019
697011: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-107-6365
Mounting Plate

331076365
7060.252.0011: RNCC: 3 | RNVC: 2
5365700005: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-200-3489
Flush Catch Claw

332003489
880301227: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-33-115-8144
Access Cover

331158144
92282201398: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-200-1155
Mounting Bracket

332001155
7053.252.0127: RNCC: 3 | RNVC: 2
2510700124: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-205-1131
Door Closer

332051131
2025782: RNCC: 3 | RNVC: 2

4 May 2006

5340-33-003-4410
Leather Strap

330034410
SP-00478: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-200-8812
Bow Handle

332008812
9644.250.0808: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-157-0142
Access Cover

331570142
-16830-G5500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2274
Mounting Bracket

331892274
01070080: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-005-0579
Angle Bracket

330050579
NN60186G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-155-7744
Angle Bracket

331557744
750616: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-105-1005
Mechanical Stop

331051005
220901010: RNCC: 3 | RNVC: 2
EN 220901-10: RNCC: 5 | RNVC: 2

5 Jul 1996

5340-33-106-4776
Retaining Bail

331064776
0151131: RNCC: 3 | RNVC: 2
ALMCTI-1000000151131: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-003-7269
Case Corner

330037269
4168-585: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-200-2550
Handwheel

332002550
323206001400: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-33-106-6164
Loop Clamp

331066164
1101157: RNCC: 3 | RNVC: 2

14 Sep 1998

5340-33-001-0797
Mounting Bracket

330010797
35-46433-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-7225
Retaining Strap

332057225
J28265177-001: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-33-200-9331
Butt Hinge

332009331
35-14147-0004-01: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-201-4242
Angle Bracket

332014242
A2810473-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-200-9674
Access Cover

332009674
109-0329-04: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-33-001-9634
Access Cover

330019634
35-22925-0005: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-116-3925
Mounting Bracket

331163925
EV-2384: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-6440
Mounting Bracket

330046440
171857119: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-155-7440
Mending Plate

331557440
140497: RNCC: 3 | RNVC: 2
35100013: RNCC: 5 | RNVC: 9

18 Oct 1990

5340-33-155-9248
Threaded Rod End

331559248
5340001067: RNCC: 3 | RNVC: 2
312206: RNCC: 3 | RNVC: 2
312206: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-145-6430
Loop Clamp

331456430
TAB. E4-41: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0494
Mounting Bracket

330010494
35-46177-0203: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-190-5482
Access Cover

331905482
K43191043-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-8871
Mounting Bracket

332008871
W290698420000: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-201-4407
Clamping Catch

332014407
791400324: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-155-7445
Mending Plate

331557445
544528: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-102-1653
Mounting Bracket

331021653
MBCE-4-7: RNCC: 3 | RNVC: 2
52420000070: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-158-2217
Retaining Clip

331582217
0216505-6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-8390
Bumper

331548390
05/2.288: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-181-2169
Loop Clamp

331812169
SS-06-0097G: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-4261
Bumper

330044261
-02311020-0: RNCC: 3 | RNVC: 2

25 Mar 1999

5340-33-202-8542
Snap Hook

332028542
2.13.064: RNCC: 3 | RNVC: 2
NM M-140 M.TIPO 1.GRAN-FJ: RNCC: 5 | RNVC: 1

12 Nov 2003

5340-33-205-1858
Metal Grille

332051858
SPA-11110101-01: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-33-001-0641
Mounting Bracket

330010641
35-46284-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-188-8322
Doorknob

331888322
6102034: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-202-7812
Lock-Release Lever

332027812
2540-901181: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-202-1343
Access Cover

332021343
CN31703.21.203-02-01: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-106-5323
Furniture Cup

331065323
A0203060: RNCC: 3 | RNVC: 2
PCAMI/RP/28A0203060: RNCC: 4 | RNVC: 1

8 Apr 1998

5340-33-106-9456
Loop Clamp

331069456
420812-6: RNCC: 3 | RNVC: 2
4730-000530: RNCC: 5 | RNVC: 2
9644.251.5284: RNCC: 5 | RNVC: 2

18 May 1999

5340-33-206-0823
Buckle

332060823
120-1072-04: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-33-107-0090
Mounting Bracket

331070090
228-108: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000551: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-145-5260
Access Cover

331455260
70-156: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2303
Rod End Connector

330012303
35-82202-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-7845
Angle Bracket

331167845
01.00110/00: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-114-4867
Access Cover

331144867
3.50 TTG-5: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-211-5730
Flush Catch

332115730
CAN66049-8-27: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-33-181-2900
Retaining Strap

331812900
SS-06-0251G: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-9212
Expansion Shield

330019212
C-20050-15-0-I-04-15: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-205-4295
Access Cover

332054295
5041009: RNCC: 3 | RNVC: 2
1.143.92.020: RNCC: 5 | RNVC: 2

22 Sep 2006

5340-33-205-9350
Snap Hook

332059350
400/12-SPN-3: RNCC: 3 | RNVC: 2

23 May 2007

5340-33-205-3809
Mounting Bracket

332053809
MAM-HE-05-02-06: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-33-156-2174
Angle Bracket

331562174
-16419-Y9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-106-8861
Angle Bracket

331068861
7356.592.0008: RNCC: 3 | RNVC: 2
2510008871: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-001-1780
Mending Plate

330011780
35-62507-1701: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-102-0218
Rod End Connector

331020218
2510-000406: RNCC: 3 | RNVC: 2
411.090.0576: RNCC: 5 | RNVC: 2
2510000406: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-33-145-6432
Loop Clamp

331456432
TAB. C9-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-182-0009
Mending Plate

331820009
-74600094-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-104-9086
Flush Bolt

331049086
-01601354-0: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-166-0436
Access Cover

331660436
TO-201: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-104-8081
Loop Clamp

331048081
731595: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-0566
Flush Catch Claw

332020566
1025-900867: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-106-2115
Angle Bracket

331062115
634595: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-160-7525
Plug Button

331607525
5.446.599: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-9884
Mounting Plate

332029884
223551103-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-116-7923
Access Cover

331167923
00.00420/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5767
Lock-Release Lever

331455767
14-109: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-0572
Section Block Clamp

330050572
NN57879G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-205-7328
Access Cover

332057328
1.120.34.05.001: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-33-116-0358
T Bracket

331160358
13205000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3821
Bumper

330013821
92020155: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-155-8977
Mending Plate

331558977
313418: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-154-0453
Expansion Plug

331540453
807900: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-103-3275
Loop Clamp

331033275
101.240: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-105-9637
Mechanical Stop

331059637
1.120.27.11.000: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-33-105-2687
Loop Clamp

331052687
-018024: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-33-211-2987
Metal Grille

332112987
5061372: RNCC: 3 | RNVC: 2
1.164.02.017: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-001-3377
Compression Cup

330013377
92014608: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-204-5385
Access Cover

332045385
203531800: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-157-7793
Angle Bracket

331577793
616743: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6941
Loop Clamp

330006941
554778: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-108-5334
Mounting Bracket

331085334
9644.810.0510: RNCC: 3 | RNVC: 2
2510007959: RNCC: 5 | RNVC: 2
2510007959: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-204-5244
Angle Bracket

332045244
9.325.1.601.001.4: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-33-105-1189
Retaining Strap

331051189
CMA90100-3/7: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-155-3739
Access Cover

331553739
196588: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-154-5682
Mending Plate

331545682
733935: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-203-7228
Mounting Bracket

332037228
324-2-E: RNCC: 3 | RNVC: 2

10 Sep 2004

5340-33-201-9891
Mounting Bracket

332019891
1025-901585: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-202-9119
Mounting Bracket

332029119
1025-901759: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-108-2443
Mounting Bracket

331082443
9644.120.0250: RNCC: 3 | RNVC: 2
2510007036: RNCC: 5 | RNVC: 2
2510007036: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-000-6939
Loop Clamp

330006939
542642: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-205-4315
Access Cover

332054315
W290607801300: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-33-200-3648
Bridge Clamp

332003648
C 4196 684: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-208-5981
Utility Resilient Mount

332085981
R0095242: RNCC: 3 | RNVC: 2

20 Oct 2010

5340-33-158-7173
Access Cover

331587173
-37446233: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9345
Catch Strike

332009345
35-22069-0003: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-108-4761
Cushioning Pad

331084761
9644.251.6139: RNCC: 3 | RNVC: 2
9330900016: RNCC: 5 | RNVC: 2
9330900016: RNCC: 5 | RNVC: 2

2 Apr 2001

Load More Results