What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 1 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 1 of 39

5340-33-102-5897
Dust And Moisture Seal Protective Cap

331025897
364-D: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-7234
Manual Control Handle

331547234
315341: RNCC: 3 | RNVC: 2
315341: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-206-0408
Multiple Angle Bracket

332060408
NN60958P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-211-3858
Utility Resilient Mount

332113858
12.2010.0103: RNCC: 3 | RNVC: 2
0738629: RNCC: 5 | RNVC: 2

14 Oct 2013

5340-33-003-2428
Manual Control Lever

330032428
0013439: RNCC: 3 | RNVC: 2

4 Feb 1997

5340-33-001-9460
Access Cover

5340-33-001-9571
Access Cover

5340-33-200-6541
Utility Resilient Mount

5340-33-158-8644
Access Cover

5340-33-154-6552
Rigid Connecting Link

5340-33-156-2191
Pintle Hook Latch

5340-33-001-9385
Access Cover

5340-33-200-4291
Mounting Plate

5340-33-200-4303
Mounting Plate

5340-33-155-6402
Angle Bracket

5340-33-209-9822
Mounting Plate

5340-33-002-0319
Mounting Bracket

5340-33-181-1177
Leaf Spring Assembly Shackle

5340-33-106-4918
Horn Button Cover

5340-33-200-4307
Angle Bracket

5340-33-000-4409
Key Washer

5340-33-106-3884
Dust And Moisture Seal Boot

5340-33-002-0284
Angle Bracket

5340-33-002-0283
Angle Bracket

5340-33-000-4396
Key Washer

5340-33-002-0321
Mounting Bracket

5340-33-000-4404
Key Washer

5340-33-002-3804
Clip Para Sujeccion

5340-33-202-1667
Access Cover

5340-33-000-4426
Key Washer

5340-33-002-0714
Access Cover

5340-33-204-0415
Stop Plate

5340-33-200-4297
Mounting Plate

5340-33-200-4314
Mounting Plate

5340-33-001-9400
Access Cover

5340-33-202-1666
Access Cover

5340-33-200-4310
Mounting Plate

5340-33-209-0784
Electrical Switch Retainer

5340-33-001-9394
Access Cover

5340-33-155-6462
Helical Compression Spring Seat

5340-33-002-0275
Mounting Bracket

5340-33-001-7367
Access Cover

5340-33-004-5272
Valve Seat

5340-33-001-9401
Access Cover

5340-33-002-0320
Mounting Bracket

5340-33-002-0322
Mounting Bracket

5340-33-000-4407
Key Washer

5340-33-202-1846
Crank Handle

5340-33-001-9397
Access Cover

5340-33-200-4289
Mounting Plate

5340-33-200-4372
Mechanic Equipment Hardware Kit

5340-33-000-4412
Key Washer

5340-33-158-5575
Friction Clutch Housing

5340-33-106-3918
Tirador-Llave Combi

5340-33-204-0935
Bow Handle

5340-33-154-5364
Dust And Moisture Seal Protective Plug

5340-33-001-9391
Access Cover

5340-33-200-4316
Mounting Plate

5340-33-105-5390
Trinquete Soporte

5340-33-160-5804
Mounting Plate

5340-33-000-4423
Key Washer

5340-33-001-9522
Access Cover

5340-33-154-0676
Door Holder

5340-33-200-3969
Handle Assembly.

5340-33-200-4295
Angle Bracket

5340-33-106-9680
Safety Disc

5340-33-105-7354
Lever Bracket

5340-33-200-4312
Multiple Angle Bracket

5340-33-001-9402
Access Cover

5340-33-161-5257
Door Handle

5340-33-002-0713
Access Cover

5340-33-000-4432
Key Washer

5340-33-001-9516
Access Cover

5340-33-001-9399
Access Cover

5340-33-000-4408
Key Washer

5340-33-004-4331
Plate Spacer

5340-33-105-8956
Handle Grip

5340-33-158-8646
Access Cover

5340-33-104-0065
Machine Thread Plug

5340-33-102-2697
Hand Crank

5340-33-200-4293
Mounting Plate

5340-33-200-4135
Friction Catch

5340-33-000-4427
Key Washer

5340-33-000-4411
Key Washer

5340-33-155-6401
Angle Bracket

5340-33-203-9553
Nonrotating Shaft Eye Bracket

5340-33-200-4305
Angle Bracket

5340-33-102-1309
Electrical Tie Down Mounting Base

5340-33-155-6467
Helical Compression Spring Seat

5340-33-001-9392
Access Cover

5340-33-000-4422
Key Washer

5340-33-002-0291
Mounting Bracket

5340-33-002-0708
Coperchio

5340-33-207-6571
Engine Mount Bracket

5340-33-202-1747
Access Cover

5340-33-001-9396
Access Cover

5340-33-106-0089
Pedal Pad

5340-33-002-0338
Access Cover

5340-33-000-6312
Hose Clamp

5340-33-001-9390
Access Cover

5340-33-003-5052
Access Cover

5340-33-001-9393
Access Cover

5340-33-001-9515
Access Cover

5340-33-205-8313
Metal Grille

5340-33-001-9513
Access Cover

5340-33-206-9209
Window Regulator Handle

5340-33-208-0313
Webbing Strap

5340-33-004-4332
Plate Spacer

5340-33-001-7366
Fl Mounting Plate

5340-33-001-9398
Access Cover

5340-33-001-9514
Access Cover

5340-33-207-6525
Vehicular Headlight Nest

5340-33-001-9395
Access Cover

5340-33-004-5266
Machine Thread Plug

5340-33-108-2996
Weapon System Resilient Mount

5340-33-201-4360
Access Cover

332014360
723581420-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-200-2274
Mounting Plate

332002274
723571445-01: RNCC: 3 | RNVC: 2
723571445-01: RNCC: 5 | RNVC: 2

15 Nov 2001

5340-33-202-6547
Access Cover

332026547
723551346-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-207-6306
Mounting Plate

332076306
R0095462: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-202-4922
Dust And Moisture Seal Protective Cap-Plug

332024922
222421774-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-202-9063
Compression Cup

332029063
723551751-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-207-6528
Access Cover

332076528
R0092875: RNCC: 3 | RNVC: 2
R0092875-0103: RNCC: 5 | RNVC: 9

21 Jul 2009

5340-33-202-6552
Access Cover

332026552
223551343-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-202-9041
Access Cover

332029041
223551361-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-0230
Mounting Bracket

332020230
723591718-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-202-6551
Mounting Plate

332026551
223551342-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-201-4362
Access Cover

332014362
223581209-01: RNCC: 3 | RNVC: 2
223581209-01: RNCC: 5 | RNVC: 2

17 Jul 2002

5340-33-202-6549
Mounting Plate

332026549
223551340-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-202-9885
Spacing Threaded Standoff

332029885
723551105-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-4370
Bail Handle

332014370
223591110-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-202-4919
Dust And Moisture Seal Protective Cap-Plug

332024919
722421776-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-202-9850
Dust And Moisture Seal Protective Cap-Plug

332029850
723591769-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-9577
Mounting Bracket

332029577
223552776-01: RNCC: 3 | RNVC: 2
223552776: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-207-6448
Bow Handle

332076448
R0094624: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-201-5526
Door Handle

332015526
223561305-01: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-33-202-0231
Access Cover

332020231
723591719-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-202-6546
Bow Handle

332026546
223551350-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-202-9043
Vent Plug

332029043
723551408-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-9851
Mounting Bracket

332029851
223553710-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-5177
Manual Control Handle

332025177
722421A30-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-202-9579
Mounting Bracket

332029579
223552778-01: RNCC: 3 | RNVC: 2
223552778: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-207-6531
Access Cover

332076531
R0092874: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-202-5179
Mounting Bracket

332025179
722421302-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-207-8752
Bumper

332078752
95-94507-0402: RNCC: 3 | RNVC: 2

12 Nov 2009

5340-33-207-8708
Butt Hinge

332078708
20749100: RNCC: 3 | RNVC: 2
DIN 7956: RNCC: 4 | RNVC: 1
EN-1935: RNCC: 4 | RNVC: 1

11 Nov 2009

5340-33-201-3839
Access Cover

332013839
223581332-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-201-4080
Access Cover

332014080
723581612-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-211-5284
Antipilferage Seal

332115284
445820.0100: RNCC: 3 | RNVC: 2
0705154: RNCC: 5 | RNVC: 2

24 Nov 2013

5340-33-204-0778
Antipilferage Seal

332040778
NG0002641: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-33-116-7614
Loop Clamp

331167614
579282: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-9621
Hinge Torsion Bar

330029621
6317520152: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-201-4657
Angle Bracket

332014657
J92563485-001: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-201-0975
Lock-Release Lever

332010975
CE300010-2801: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-205-5289
Angle Bracket

332055289
W280614901511: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-33-206-1304
Mounting Plate

332061304
PCMSABMR070: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-210-8288
Mounting Bracket

332108288
S258A4012134: RNCC: 3 | RNVC: 2

26 Feb 2013

5340-33-116-6148
Angle Bracket

331166148
15 A-107: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-5052
Detent Plunger

331145052
5TG 4-45: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-107-2665
Strap Fastener Loop

331072665
9PPEB2590: RNCC: 3 | RNVC: 2
PCAMI/RP/43E000LL25: RNCC: 6 | RNVC: 9

21 Sep 1999

5340-33-103-1757
Detent Plunger

331031757
1005-004453: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7959
Hook Handle

331067959
REM-200-6-2-4: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-200-2146
Mending Plate

332002146
J57166551-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-001-0102
Mounting Bracket

330010102
35-34163-0105: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-8046
Lever Bracket

331168046
01.00530/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-2609
Access Cover

331262609
GCH-3MS/005/3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3994
Angle Bracket

332013994
A2811305-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-116-5644
Bridge Clamp

331165644
31512-ZE1-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9916
Mounting Plate

332029916
CS-EF2-AG1050107-2: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-102-4010
Leather Strap

331024010
MD51-7-2: RNCC: 3 | RNVC: 2
MD51-7-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-6702
Access Cover

331806702
208535: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-6308
Access Cover

331086308
203616: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-107-7106
Protection Bellows

331077106
160070: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-155-8731
Ball Socket Seat

331558731
5340001033: RNCC: 3 | RNVC: 2
513092: RNCC: 3 | RNVC: 2
513092: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-201-7213
Access Cover

332017213
1025901146: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-206-1959
Mounting Plate

332061959
CBD58505P50: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-126-0617
Angle Bracket

331260617
8866.14: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-000-1884
Loop Clamp

330001884
529984: RNCC: 1 | RNVC: 2
529984: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-154-5531
Retaining Strap

331545531
321690: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-155-7498
Mending Plate

331557498
786771: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-107-3057
Access Cover

331073057
21124567000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-108-2183
Mounting Bracket

331082183
9644.100.1210: RNCC: 3 | RNVC: 2
1005005688: RNCC: 5 | RNVC: 2
1005005688: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-7384
Mounting Bracket

331067384
U01006: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-204-2108
Swivel Caster

332042108
36-014 FD: RNCC: 3 | RNVC: 2
9-1151: RNCC: 5 | RNVC: 2

12 May 2005

5340-33-158-8952
Loop Clamp

331588952
SS-06-0074G: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-4462
Utility Guard Rail Section

332094462
0663.10.3002.00: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-33-107-7474
Mounting Plate

331077474
W290684071400: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-161-2575
Mounting Plate

331612575
2530000471: RNCC: 3 | RNVC: 2
311670: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-003-8090
Mounting Bracket

330038090
1055-001660: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-33-160-3678
Retaining Strap

331603678
NM-4518: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9275
Mounting Plate

331159275
01.00118/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9494
Mounting Bracket

332019494
J92661141-003: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-211-5008
Rod End Clevis

332115008
10-61076-0201: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-001-0463
Mounting Bracket

330010463
35-46126-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-5190
Lock-Release Lever

332055190
4312-712-6609E: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-33-001-1342
Mounting Bracket

330011342
35-53175-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-7844
Angle Bracket

331167844
DSH-717: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0777
Mounting Bracket

330010777
35-46387-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1463
Mounting Bracket

330011463
35-54419-0003: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-0204
Detent Plunger

330000204
1005-000010: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-116-5519
Access Cover

331165519
28410-ZE1-811: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3082
Key Blank

332053082
37146-01F00: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-001-1779
Mending Plate

330011779
35-62507-1601: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-105-9608
Mounting Plate

331059608
A52-01-09: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-33-201-4227
Mounting Plate

332014227
A2810429-402: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-205-0777
Rim Lock Set

332050777
95700-44810: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-203-6152
Access Cover

332036152
387919: RNCC: 3 | RNVC: 2
387919: RNCC: 5 | RNVC: 2
4310-33-M32-2128: RNCC: 6 | RNVC: 9

22 Jun 2004

5340-33-201-4011
Angle Bracket

332014011
A2810483-402: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-200-7691
Retaining Strap

332007691
J92563750-401: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-33-103-1581
Mounting Bracket

331031581
1005-004423: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1584
Mounting Bracket

331031584
1005-004565: RNCC: 3 | RNVC: 2
3278: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-205-4113
Loop Clamp

332054113
PS-610421: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-203-8106
Rod End Clevis

332038106
35-81578-0101: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-33-206-2183
Buckle

332062183
SLL-25: RNCC: 3 | RNVC: 2
SLL-25AB: RNCC: 5 | RNVC: 2
SLL-25 ACETAL BLACK: RNCC: 5 | RNVC: 2

1 Oct 2007

5340-33-116-0656
Loop Clamp

331160656
BM-14256000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4404
Mounting Bracket

330034404
SP-00466: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-201-2177
Utility Access Door

332012177
A2810435-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-206-0959
Loop Clamp

332060959
PS-610575: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-33-004-4550
Access Cover

330044550
CLT0049-10: RNCC: 3 | RNVC: 2

17 May 1999

5340-33-156-4619
Bow Handle

331564619
-73940-08M00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-2466
Mounting Bracket

331022466
1005-001715: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-203-7007
Access Cover

332037007
204800205: RNCC: 3 | RNVC: 2
204800205: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-203-1780
Lock-Release Lever

332031780
9673.250.5244: RNCC: 3 | RNVC: 2
2540900602: RNCC: 5 | RNVC: 2
2540900602: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-189-2279
Mounting Bracket

331892279
01220082: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-1880
Catch Strike

331081880
571674: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-202-9126
Mounting Bracket

332029126
1025-901768: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-108-2491
Access Cover

331082491
9644.250.0714: RNCC: 3 | RNVC: 2
2510008152: RNCC: 5 | RNVC: 2
2510008152: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-202-4029
Angle Bracket

332024029
0110680000200: RNCC: 3 | RNVC: 2

9 May 2003

5340-33-211-2434
Mounting Bracket

332112434
S531A2091116: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-33-001-5254
Compression Cup

330015254
92032203: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-205-0098
Access Cover

332050098
0602527: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-108-0231
Mounting Bracket

331080231
9644.251.6274: RNCC: 3 | RNVC: 2
2540900395: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-001-7739
Access Cover

330017739
4060-CIEGA: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-33-103-1222
Rod End Clevis

331031222
375.093.3199: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6539
Loop Clamp

331546539
562952: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-106-8260
Access Cover

331068260
196929: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-001-8032
Access Cover

330018032
35-22836-0002-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-154-0259
Butt Hinge

331540259
814896: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-003-2933
Buckle

330032933
721023563: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-204-5359
Pipe Hanger

332045359
35-46385-0006A02: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-102-1827
Clamping Catch

331021827
52530000560: RNCC: 3 | RNVC: 2
MCL-5-56: RNCC: 3 | RNVC: 2
52530000560: RNCC: 3 | RNVC: 2
MCL-5-56: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-3822
Access Hole Frame

330033822
212-81111-01-1: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-33-102-1467
Rod End Clevis

331021467
B-2-30: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-000-6979
Loop Clamp

330006979
764539: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-002-4671
Rod End Connector

330024671
TAN16723-10B: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-107-1646
Case Leg

331071646
PCAMI/RP/0306107017: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-000-0289
Snap Hook

330000289
5340000001: RNCC: 1 | RNVC: 2
5340-000001: RNCC: 3 | RNVC: 2

19 Sep 1985

5340-33-202-3167
Angle Bracket

332023167
A2811717-402: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-33-204-5293
Lock-Release Lever

332045293
95-21079-0101: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-33-200-1855
Access Cover

332001855
J57461615-002: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-002-0108
Padlock

330020108
60 L: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-204-7510
Mounting Plate

332047510
5037131: RNCC: 3 | RNVC: 2
1.124.92.017: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-000-0657
Access Cover

330000657
6.305.0972.015.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-004-8269
Access Cover

330048269
SERIE 6000-2: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-33-107-9396
Plug Button

331079396
SE141521930A: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-001-1763
Mounting Bracket

330011763
35-62181-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-104-6447
Door Handle

331046447
10.12.14.0082.0: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-116-2351
Handwheel

331162351
A-415.443: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-2674
Utility Access Door

332002674
100402070000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-205-4624
Mechanical Stop

332054624
CBD50514P08: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-33-203-2769
Mounting Bracket

332032769
9673.250.5390: RNCC: 3 | RNVC: 2
2510900638: RNCC: 5 | RNVC: 2
2510900638: RNCC: 5 | RNVC: 2

20 Feb 2004

5340-33-188-7699
Loop Clamp

331887699
1420160: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-105-6347
Loop Clamp

331056347
0848586: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-200-0728
Retaining Strap

332000728
4400056: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-33-202-7051
Access Cover

332027051
9673.250.0950: RNCC: 3 | RNVC: 2
2510901238: RNCC: 5 | RNVC: 2
2510901238: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-155-9241
Mounting Bracket

331559241
649111: RNCC: 3 | RNVC: 2
649111: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-155-7490
Mending Plate

331557490
527141: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-3136
Mounting Bracket

332003136
28150302: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-33-157-7903
Angle Bracket

331577903
635788: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-7211
Beam Gripping Clamp

330017211
35-43724-0101: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-115-8519
Access Cover

331158519
H8/225/PH/29/8: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-116-0902
Mounting Bracket

331160902
BL-18134080: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2245
Mechanical Stop

332012245
109-1269-03: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-102-3071
Buckle

331023071
579-045868.8: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-205-9694
Mounting Plate

332059694
M18-A3307-0001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-33-200-3009
Pipe Hanger

332003009
35-46390-0005A01: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-33-005-3335
Mending Plate

330053335
180078: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-33-116-1595
Mounting Bracket

331161595
3 131 336: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8529
Access Cover

331158529
H8/225/PH/1/9: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-002-4828
Doorknob

330024828
212-21191-07-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-102-2489
Strap Hinge

331022489
1005-001066: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-201-1546
Handle Grip

332011546
212-56124-13.1: RNCC: 3 | RNVC: 2

17 May 2002

5340-33-126-5764
Rod End Connector

331265764
G38212-R-0400: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1977
Mounting Plate

330011977
35-66580-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-1993
Mounting Bracket

332041993
INS7053/001: RNCC: 3 | RNVC: 2

9 May 2005

5340-33-205-1942
Mounting Plate

332051942
SPA-11511201-01: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-33-114-4754
Access Cover

331144754
5TG 5-24: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-211-3859
Plug Button

332113859
114-54-43260: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-33-204-5468
Mounting Bracket

332045468
M.A.S. 841-25.3-2: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-33-202-5649
Block Clamp

332025649
95-51038-0001: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-107-0737
Angle Bracket

331070737
25401056-5: RNCC: 3 | RNVC: 2
PCAMI/RP/0554010565: RNCC: 6 | RNVC: 9

14 Jun 1999

5340-33-202-3110
Rod End Clevis

332023110
35-23317-0013A03: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-33-002-4815
Mounting Plate

330024815
212-62014-13-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-201-4012
Angle Bracket

332014012
A2810535-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-200-1849
Access Cover

332001849
J57461515-001: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-001-1390
Mounting Bracket

330011390
35-54201-0602: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-003-3508
Loop Clamp

330033508
R508-E3X12: RNCC: 3 | RNVC: 2

25 Jun 1997

5340-33-116-2349
Handle Grip

331162349
SS. 3/43: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-5059
Mounting Bracket

331145059
5TG 5-243: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-145-6380
Shimmy Damper

331456380
TAB. B1-28: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9269
Mounting Plate

331159269
01.00726/01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-7847
Angle Bracket

331167847
02.00760/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2182
Angle Bracket

331562182
-21541-03C00: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-000-7487
Angle Bracket

330007487
578944: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-158-2228
Retaining Clip

331582228
0216516-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0568
Access Cover

331070568
192890: RNCC: 3 | RNVC: 2
192890: RNCC: 6 | RNVC: 9

14 Jun 1999

5340-33-002-9237
Loop Clamp

330029237
6310180244: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-181-7195
Retaining Strap

331817195
-06400428-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-1337
Angle Bracket

330031337
TIPO B: RNCC: 3 | RNVC: 2

11 Sep 1995

5340-33-200-3659
Access Cover

332003659
C 6623 249: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-181-8465
Access Cover

331818465
-11900611-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-2865
Angle Bracket

330032865
721022306: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-204-1774
Rod Retainer Clip

332041774
09209-05016: RNCC: 3 | RNVC: 2
09209-05016: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-33-107-6875
Mounting Bracket

331076875
CF 354 652 A: RNCC: 3 | RNVC: 2
59.51.045: RNCC: 5 | RNVC: 2

3 May 2000

5340-33-106-3757
Access Cover

331063757
F15D750000: RNCC: 3 | RNVC: 2

21 Nov 1997

5340-33-190-3872
Loop Clamp

331903872
2510000042: RNCC: 3 | RNVC: 2
2221-0: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-181-7702
Access Cover

331817702
-07201041-3: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-0751
Door Handle

330030751
01605025-2: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-161-4464
Rod End Clevis

331614464
100.23.06.01.12.0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-1778
Loop Clamp

331071778
4730002503: RNCC: 3 | RNVC: 2
DIN 3016 D1 36X20 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-116-8089
Rod End Clevis

331168089
D-564: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-9773
Mending Plate

331889773
3 170 328: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-115-9405
Loop Clamp

331159405
6.0402.10.1.2020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-9710
Mounting Plate

331079710
0639.250.7669: RNCC: 3 | RNVC: 2
2510005023: RNCC: 5 | RNVC: 2
2510005023: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-158-5627
Rim Lock Set

331585627
-01601297-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5603
Loop Clamp

331875603
0301164-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2808
Locking Stay

331052808
-12100267-1: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-000-7024
Loop Clamp

330007024
3090202649: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-154-6496
Loop Clamp

331546496
3090211211: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-190-5481
Access Cover

331905481
K43191036-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-4365
Snap Hook

331064365
09523940: RNCC: 3 | RNVC: 2

12 Jan 1998

5340-33-202-6822
Mounting Bracket

332026822
9673.590.5042: RNCC: 3 | RNVC: 2
2510901635: RNCC: 5 | RNVC: 2
2510901635: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-201-3844
Access Cover

332013844
223581411-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-200-7714
Antipilferage Seal

332007714
PRECINTO PLOMO: RNCC: 3 | RNVC: 2

11 Mar 2002

5340-33-103-8655
Antipilferage Seal

331038655
04021909: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-204-7722
Antipilferage Seal

332047722
80 2390 10MM: RNCC: 3 | RNVC: 2
BS-33FCI0423: RNCC: 5 | RNVC: 2

17 Jan 2006

5340-33-108-5183
Loop Clamp

331085183
814786: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-189-2360
Rim Lock

331892360
0900025: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-3334
Expansion Plug

330013334
92012625: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-156-2044
Door Handle

331562044
631 760 04 59: RNCC: 3 | RNVC: 2
6317600459: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-33-106-7318
Access Cover

331067318
AM81020400: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-107-1936
Hinged Hasp

331071936
0188590: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-108-4728
Mounting Plate

331084728
9644.590.5001: RNCC: 3 | RNVC: 2
5975000906: RNCC: 5 | RNVC: 2
5975000906: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-201-8108
Mounting Bracket

332018108
319798: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-116-7042
Mending Plate

331167042
407.707: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-200-9864
Mending Plate

332009864
2510900299: RNCC: 3 | RNVC: 2
2510900299: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-155-7519
Mending Plate

331557519
739205: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-6690
Retaining Strap

332026690
9673.250.0418: RNCC: 3 | RNVC: 2
1005900451: RNCC: 5 | RNVC: 2
1005900451: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-000-7039
Loop Clamp

330007039
3090216449: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-7574
Access Cover

331577574
551775: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-1794
Locking Stay

331051794
77 02 146 786: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-203-9125
Strap Fastener Loop

332039125
171PLAST01: RNCC: 3 | RNVC: 2
4300000000FT7: RNCC: 5 | RNVC: 2

10 Jan 2005

5340-33-153-9669
Door Handle

331539669
507049: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-005-1562
Threaded Rod End

330051562
201601604: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-33-203-2073
Access Cover

332032073
2510900558: RNCC: 3 | RNVC: 2
2510900558: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-204-4954
Mounting Bracket

332044954
R25E120300: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-33-155-7456
Mending Plate

331557456
521144: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-5516
Access Cover

332035516
80060006: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-001-5390
Angle Bracket

330015390
92040406: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-8910
Mounting Bracket

332008910
W290698605500: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-205-9278
Retaining Strap

332059278
4720900017: RNCC: 3 | RNVC: 2
9682.101.1170: RNCC: 5 | RNVC: 2

21 May 2007

5340-33-200-6493
Access Door Hinge

332006493
235022: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-33-002-1581
Angle Bracket

330021581
921.262.37: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-156-2819
Mounting Bracket

331562819
-74420-G970X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-4934
Mounting Bracket

331544934
584574: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-155-5204
Access Cover

331555204
680171: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-106-9418
Mounting Plate

331069418
584732: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-157-8531
Access Cover

331578531
781635: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-201-4803
Mounting Bracket

332014803
NN60593P01: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-157-8231
Access Cover

331578231
741314: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-1782
Mounting Bracket

332051782
28513000530: RNCC: 3 | RNVC: 2

31 May 2006

5340-33-187-5607
Loop Clamp

331875607
0301168-6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6720
Retaining Strap

330006720
812400: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-154-0196
Bow Handle

331540196
572186: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-200-9040
Mounting Bracket

332009040
3465700087: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-106-7390
Pawl Fastener

331067390
U01436: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-201-8049
Mounting Bracket

332018049
320528: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-116-5077
Angle Bracket

331165077
5660761: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1642
Rod End Clevis

331161642
4 200 329: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-1761
Angle Bracket

331891761
02100020: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-5608
Retaining Strap

331585608
SS-06-0168A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-5795
Access Cover

331815795
-01201399: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7017
Loop Clamp

330007017
838823: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-206-5275
Utility Access Door

332065275
CF 209 048 DX: RNCC: 3 | RNVC: 2

19 Feb 2008

5340-33-201-8165
Access Cover

332018165
9644.101.0137: RNCC: 3 | RNVC: 2
1005006599: RNCC: 5 | RNVC: 2
1005006599: RNCC: 5 | RNVC: 2

28 Oct 2002

5340-33-201-8803
Utility Access Door

332018803
T15D020200: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-190-3886
Loop Clamp

331903886
2237: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-002-9810
Door Closer

330029810
0160263: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-205-0144
Access Cover

332050144
19651120: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-33-003-2948
Stand Base

330032948
721024341: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-107-9964
Mounting Bracket

331079964
9644.250.1970: RNCC: 3 | RNVC: 2
1005006043: RNCC: 5 | RNVC: 2
1005006043: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-33-204-1376
Mounting Bracket

332041376
064.08.02.08.M04: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-33-107-9498
Rod End Clevis

331079498
SP08095: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-202-5899
Angle Bracket

332025899
738360: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-33-211-2749
Angle Bracket

332112749
SP06790: RNCC: 3 | RNVC: 2

4 Aug 2013

5340-33-001-4097
Angle Bracket

330014097
92021719: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-003-4800
Mending Plate

330034800
105 6951: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-33-157-0160
Access Cover

331570160
-33140-G9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-6422
Access Cover

332006422
315538: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-33-181-0474
Mechanical Stop

331810474
-16648-37502: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6677
Retaining Strap

330006677
559902: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-001-4210
Angle Bracket

330014210
92023225: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-004-8743
Loop Clamp

330048743
NN60162P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-158-1496
Runner

331581496
619077: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7704
Angle Bracket

331557704
645858: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-8137
Angle Bracket

332008137
7063.252.0096: RNCC: 3 | RNVC: 2
2540700101: RNCC: 5 | RNVC: 2

13 Mar 2002

5340-33-202-0715
Access Cover

332020715
L3022.40.07: RNCC: 3 | RNVC: 2

3 Jan 2003

5340-33-115-8150
Access Cover

331158150
92130313003: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-154-4157
Loop Clamp

331544157
3090215249: RNCC: 3 | RNVC: 2
3090215249: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-005-0055
Rod Retainer Clip

330050055
1180215: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-116-2880
Retaining Strap

331162880
102917267: RNCC: 3 | RNVC: 9

18 Sep 1992

5340-33-000-0661
Access Cover

330000661
6.302.0.787.022.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-001-4499
Compression Cup

330014499
92026425: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-181-7191
Angle Bracket

331817191
-06400424-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-7422
Flush Bolt

330037422
631 720 04 35: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-188-2611
Rod End Clevis

331882611
-228321: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-2460
Strap Fastener Loop

330032460
221023560: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-157-7150
Angle Bracket

331577150
313913: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-6016
Mounting Bracket

331456016
71402021-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4184
Access Cover

330034184
11.28951-2600-SE: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-108-4461
Cushioning Pad

331084461
9644.251.5523: RNCC: 3 | RNVC: 2
2540001388: RNCC: 5 | RNVC: 2
2540001388: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-187-5551
Loop Clamp

331875551
0201613-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3945
Angle Bracket

331613945
731419: RNCC: 3 | RNVC: 2
15100428: RNCC: 5 | RNVC: 9

31 Oct 1996

5340-33-004-7132
Pipe Hanger

330047132
5.481.691: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-202-7570
Swivel Caster

332027570
2007332: RNCC: 3 | RNVC: 2

13 Oct 2003

5340-33-202-6703
Access Cover

332026703
5034115: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-107-9604
Mounting Bracket

331079604
00.442.07.600: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-189-2291
Mounting Bracket

331892291
0350030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-2547
Rod End Clevis

332052547
35-23317-0015: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-33-107-4143
Mounting Plate

331074143
7062.252.0630: RNCC: 3 | RNVC: 2
2510700579: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-002-0090
Mortise Lock Set

330020090
C.P.2.: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-181-8300
Mounting Plate

331818300
-10200416-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-4431
Mounting Plate

332004431
WW 321 501 D: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-205-3639
Rod End Connector

332053639
5032024: RNCC: 3 | RNVC: 2
1.128.71.010: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-33-001-4460
Lock-Release Lever

330014460
92026346: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-182-0098
Angle Bracket

331820098
-79900072-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-2691
Mounting Plate

331082691
9644.251.1320: RNCC: 3 | RNVC: 2
2510900278: RNCC: 5 | RNVC: 2
2510900278: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-202-9446
Mounting Bracket

332029446
319585: RNCC: 3 | RNVC: 2

10 Dec 2003

5340-33-161-4251
Angle Bracket

331614251
165305: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-181-8494
Access Cover

331818494
-11902275-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-4890
Access Cover

330014890
92027541: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-115-8133
Access Cover

331158133
14202801580: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-003-2846
Retaining Strap

330032846
721024502: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-116-3424
Bumper

331163424
8960.012: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-4934
Access Cover

331874934
194477: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-4710
Mounting Bracket

331034710
6330.057: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-8967
Utility Access Door

332058967
VA75011300: RNCC: 3 | RNVC: 2

8 May 2007

5340-33-200-5333
Loop Clamp

332005333
4730002215: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-33-000-7493
Angle Bracket

330007493
642018: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-204-3693
Mounting Bracket

332043693
W290698493700: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-33-004-7631
Access Door Hinge

330047631
-01105983-0B: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-200-8921
Mounting Plate

332008921
W290698608200: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-200-8815
Mounting Plate

332008815
W280698606103: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-202-6613
Access Cover

332026613
9673.250.0810: RNCC: 3 | RNVC: 2
2510900826: RNCC: 5 | RNVC: 2
2510900826: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-203-5520
Access Cover

332035520
80060010: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-002-4776
Flush Catch Claw

330024776
CA33200-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-002-0887
Retaining Strap

330020887
317484: RNCC: 3 | RNVC: 2
317484: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-33-108-0072
Mounting Bracket

331080072
9644.251.3050: RNCC: 3 | RNVC: 2
2540900503: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-202-6753
Access Cover

332026753
5032007: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-181-7809
Angle Bracket

331817809
-07700272-3: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-1596
Mounting Bracket

331161596
4 001 207: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-144-6353
Mounting Bracket

331446353
G 514551: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8532
Access Cover

331158532
6022C02290: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-204-7940
Mounting Bracket

332047940
295277-1: RNCC: 3 | RNVC: 2

24 Jan 2006

5340-33-154-0467
Expansion Plug

331540467
3340804049: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-33-211-2953
Angle Bracket

332112953
SP08502: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-211-2984
Mounting Plate

332112984
5061374: RNCC: 3 | RNVC: 2
1.164.02.031: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-115-8132
Access Cover

331158132
10205002510: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-102-5907
Friction Catch

331025907
253-B: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-7442
Mounting Bracket

331077442
W290684024800: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-154-6537
Loop Clamp

331546537
550469.01: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-157-6951
Angle Bracket

331576951
146963: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3695
Mounting Bracket

331613695
585023: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-6608
Angle Bracket

332006608
7562.252.0098: RNCC: 3 | RNVC: 2
2530000977: RNCC: 5 | RNVC: 2

21 Feb 2002

5340-33-105-5474
Retaining Strap

331055474
120880: RNCC: 3 | RNVC: 2

30 Mar 1996

5340-33-210-9428
Block Clamp

332109428
1025902324: RNCC: 3 | RNVC: 2
9743.100.0335: RNCC: 5 | RNVC: 2

10 Apr 2013

5340-33-002-8802
Door Handle

330028802
737360000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-181-7180
Angle Bracket

331817180
-06400365-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-2570
Angle Bracket

332112570
TP252807: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-33-157-8967
Mending Plate

331578967
313919: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7411
Permanent Magnet

332027411
D0941311330: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-33-203-1806
Mounting Bracket

332031806
9673.250.7670: RNCC: 3 | RNVC: 2
2540901036: RNCC: 5 | RNVC: 2
2540901036: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-114-7565
Bumper

331147565
TRAXLER 5 664: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-33-107-9761
Mounting Bracket

331079761
9644.250.8210: RNCC: 3 | RNVC: 2
2540001197: RNCC: 5 | RNVC: 2
2540001197: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-200-1011
Utility Access Door

332001011
SHN2010200: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-001-3798
Expansion Plug

330013798
92020125: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-106-0886
Bow Handle

331060886
R 800521: RNCC: 3 | RNVC: 2

25 Feb 1997

5340-33-107-7492
Mounting Plate

331077492
W290684073700: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-126-4009
Shimmy Damper

331264009
64.010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-4037
Metal Grille

331264037
6.302.0.995.003.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-153-9673
Door Handle

331539673
586287: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-108-1881
Catch Strike

331081881
571675: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-108-4762
Cushioning Pad

331084762
9644.251.6203: RNCC: 3 | RNVC: 2
9330900019: RNCC: 5 | RNVC: 2
9330900019: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-154-0202
Bow Handle

331540202
812409: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-211-4796
Mounting Bracket

332114796
0853722300002: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-180-7506
Retaining Clip

331807506
4042: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-187-5609
Loop Clamp

331875609
0301170-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-144-6267
Angle Bracket

331446267
E 103 397: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-107-2290
Leather Strap

331072290
32530001050: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-33-154-2213
Mending Plate

331542213
193683: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-154-0264
Butt Hinge

331540264
619042: RNCC: 3 | RNVC: 2

21 Dec 1989

Load More Results