Hardware, Commercial - Denmark (DK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Denmark (DK) - NCB is 22

Page 11 of 31

NSN Format for Hardware, Commercial
Codified by Denmark

534022XXXXXXX
Group
FSG
ClassNCBIdentifier
FSC
Federal Supply Class
NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Denmark (DK)
FSC 5340 Hardware, Commercial - Denmark (DK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340 Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?
FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?
NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?
FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?
NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340 Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items
A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 34 Items
A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 77 Items
A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 18 Items
Holder,Spring 61 Items
What is a Rod End Connector? 17 Items
A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 80 Items
A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 26 Items
An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 34 Items
A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items
A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 201 Items
A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 28 Items
A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 28 Items
A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 27 Items
A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Flush Lock? 12 Items
A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 29 Items
A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Mortise Lock Set? 28 Items
A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 35 Items
A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items
A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 11 Items
A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 46 Items
A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 21 Items
A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 63 Items
An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 45 Items
A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Plug Button? 29 Items
A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items
A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 15 Items
A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items
A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 38 Items
A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 284 Items
A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 159 Items
A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 91 Items
A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 90 Items
A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 10 Items
A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Support Hook? 39 Items
A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Nut And Bolt Retainer? 14 Items
A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 25 Items
A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT&#59; DIAPHRAGM, VALVE, SPECIAL SHAPED&#59; DISK, VALVE, NONMETALLIC&#59; FILTERING DISK FLUID&#59; and INSULATOR, DISK.
What is an Angle Bracket? 331 Items
An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 16 Items
An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 70 Items
A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 25 Items
A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 458 Items
A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 26 Items
A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 38 Items
A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 18 Items
A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items
A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 10 Items
A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Retaining Band? 28 Items
A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 10 Items
A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 38 Items
A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 51 Items
A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 80 Items
A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items
A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 28 Items
A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 122 Items
A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 112 Items
A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Shop Set Installation Hardware Kit? 94 Items
A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Cushioning Pad? 18 Items
A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 21 Items
A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 45 Items
A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items
An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Hand Carrying Strap Assembly? 12 Items
A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 55 Items
A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 25 Items
A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 22 Items
An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 13 Items
A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 43 Items
A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 15 Items
A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 24 Items
A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 13 Items
A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 43 Items
A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 20 Items
An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Access Cover? 383 Items
An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 26 Items
A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is an Antipilferage Seal? 19 Items
An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 103 Items
A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 22 Items
A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 36 Items
A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Metallic Solid Wheel? 19 Items
A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 1997 Items
A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 22 Items
An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Retaining Bail? 13 Items
A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 13 Items
A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 512 Items
A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Mechanical Stop? 20 Items
A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Multiple Angle Bracket? 50 Items
A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Handle Ferrule? 26 Items
A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 16 Items
A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 34 Items
A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 17 Items
A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items
A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 105 Items
A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items
A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 16 Items
A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 57 Items
A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 34 Items
A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 27 Items
A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Slotted Nut Locking Device? 16 Items
A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 26 Items
An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 157 Items
An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM&#59; SPRING (as modified)&#59; BUMPER, NONMETALLIC&#59; BUMPER, RUBBER&#59; BUSHING, NONMETALLIC&#59; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 58 Items
A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 19 Items
An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 20 Items
A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 12 Items
A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 13 Items
A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Manual Control Lever? 49 Items
A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items
A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Utility Guard Rail Section? 16 Items
An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 56 Items
A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified)&#59; BUSHING, NONMETALLIC&#59; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Stock Items From Supply Class 5340 Page 11 of 31

226164372
123223
RNCC: 3 | RNVC: 2
226066544
6063438
RNCC: 3 | RNVC: 2
226258155
05876-000
RNCC: 3 | RNVC: 2
221209997
3143-135
RNCC: 3 | RNVC: 2
226192176
09251190-I
RNCC: 3 | RNVC: 2
223068050
1221217
RNCC: 3 | RNVC: 2
F6400-007166
RNCC: 5 | RNVC: 2
226245325
234472
RNCC: 3 | RNVC: 2
222852125
074.125
RNCC: 3 | RNVC: 2
IN074125
RNCC: 3 | RNVC: 2
226107110
LT 206
RNCC: 3 | RNVC: 2
226247885
1340062
RNCC: 3 | RNVC: 2
226193190
224-04-09-001
RNCC: 3 | RNVC: 2
221211634
19J709071P1
RNCC: 3 | RNVC: 2
J709071P1
RNCC: 3 | RNVC: 2
226163939
TG:C022434R00
RNCC: 3 | RNVC: 2
226188959
TG 344184
RNCC: 3 | RNVC: 2
226257049
973073
RNCC: 3 | RNVC: 2
226215078
MT1124/12/0/40
RNCC: 3 | RNVC: 2
2 0140-787
RNCC: 5 | RNVC: 2
226210965
548113
RNCC: 3 | RNVC: 2
226037677
505590
RNCC: 3 | RNVC: 2
226206941
000E0403
RNCC: 3 | RNVC: 2
221210033
13143035
RNCC: 3 | RNVC: 2
222102427
DUT NR. 35
RNCC: 3 | RNVC: 2
226105292
3131088
RNCC: 3 | RNVC: 2
222511367
8322727
RNCC: 3 | RNVC: 2
222510588
104918
RNCC: 3 | RNVC: 2
226007977
AB-20024
RNCC: 3 | RNVC: 2
226204937
TG-344620
RNCC: 3 | RNVC: 2
226252215
345158-00
RNCC: 3 | RNVC: 2
226105554
417870
RNCC: 3 | RNVC: 2
226075741
DAEKSEL,DECK SOCKET D62A/D62B
RNCC: 3 | RNVC: 2
226113125
EI 100-NK
RNCC: 3 | RNVC: 2
222226399
43-9470-10MM4KT
RNCC: 3 | RNVC: 2
439470-10MM4KT
RNCC: 3 | RNVC: 2
VVS43-9470-10MM4KT
RNCC: 3 | RNVC: 2
43-9470-100
RNCC: 3 | RNVC: 2
45-4230-0
RNCC: 6 | RNVC: 9
226183626
836862079
RNCC: 3 | RNVC: 2
226166646
331 101 668
RNCC: 3 | RNVC: 2
226256699
234701
RNCC: 3 | RNVC: 2
222604815
6108652
RNCC: 3 | RNVC: 2
226009721
030 0301 0030
RNCC: 3 | RNVC: 2
221191195
322-25118-00
RNCC: 3 | RNVC: 2
226245525
TT54385-03
RNCC: 3 | RNVC: 2
226058226
528801342
RNCC: 3 | RNVC: 2
223056861
704535
RNCC: 3 | RNVC: 2
F6281-005191
RNCC: 5 | RNVC: 2
226127812
20.43.03
RNCC: 3 | RNVC: 2
226195367
274740
RNCC: 3 | RNVC: 2
226185975
052480 8 005
RNCC: 3 | RNVC: 2
221269072
TG-340602
RNCC: 3 | RNVC: 2
226262559
582077
RNCC: 3 | RNVC: 2
226176708
2820215
RNCC: 3 | RNVC: 2
221257629
362-32-053
RNCC: 3 | RNVC: 2
226108959
40-501-00-0004
RNCC: 3 | RNVC: 2
221262951
820-002133
RNCC: 3 | RNVC: 2
226179225
2512-DK
RNCC: 3 | RNVC: 2
221189525
SL-28662
RNCC: 3 | RNVC: 2
226233016
100005646
RNCC: 3 | RNVC: 2
533-SG323
RNCC: 6 | RNVC: 9
226059570
TS73V
RNCC: 3 | RNVC: 2
226237032
TT54285
RNCC: 3 | RNVC: 2
226241571
0300302000
RNCC: 3 | RNVC: 2
226111281
043145
RNCC: 3 | RNVC: 2
221208015
31.0289-01
RNCC: 3 | RNVC: 2
226105351
CY 057 N
RNCC: 3 | RNVC: 2
226172787
30505-06-1709
RNCC: 3 | RNVC: 2
223025963
9099031-001
RNCC: 3 | RNVC: 2
221257713
660-009B12G3-106
RNCC: 3 | RNVC: 2
244165-003
RNCC: 5 | RNVC: 2
221205744
TG-229061
RNCC: 3 | RNVC: 2
221246170
916320-30114
RNCC: 3 | RNVC: 2
320-91630114
RNCC: 5 | RNVC: 2
226251023
4440-7010
RNCC: 3 | RNVC: 2
4440-7010
RNCC: 5 | RNVC: 2
221209531
2333-012
RNCC: 3 | RNVC: 2
222508672
080211001
RNCC: 3 | RNVC: 2
226141272
24VE2/3ANICD
RNCC: 3 | RNVC: 2
221212389
802023
RNCC: 3 | RNVC: 2
222691976
04.02-0049
RNCC: 3 | RNVC: 2
221186938
TI-ER00129E/21
RNCC: 2 | RNVC: 2
226255160
308599
RNCC: 3 | RNVC: 2
221211491
6657244
RNCC: 3 | RNVC: 2
6657244
RNCC: 5 | RNVC: 2
5000816284
RNCC: 5 | RNVC: 2
89471805
RNCC: 5 | RNVC: 2
221211490
6656134
RNCC: 3 | RNVC: 2
6656134
RNCC: 5 | RNVC: 2
89471803
RNCC: 5 | RNVC: 2
5000816165
RNCC: 5 | RNVC: 2
226015237
0542 12 12
RNCC: 5 | RNVC: 2
226241342
64090
RNCC: 3 | RNVC: 2
221215698
251.1.1.3.7
RNCC: 3 | RNVC: 2
223017722
AS216616-12X300-8SPEC2644-1
RNCC: 2 | RNVC: 2
0008842-000
RNCC: 3 | RNVC: 2
226155624
04-9596-4441-01
RNCC: 3 | RNVC: 2
226171450
30802-05E-090
RNCC: 3 | RNVC: 2
226159665
714-4244-102
RNCC: 3 | RNVC: 2
226195009
05-1627-10-180
RNCC: 3 | RNVC: 2
62507012
RNCC: 3 | RNVC: 2
226067892
SL-34940
RNCC: 3 | RNVC: 2
226245991
132601-02
RNCC: 3 | RNVC: 2
221240164
TG-338917
RNCC: 3 | RNVC: 2
226193846
41 50 61
RNCC: 3 | RNVC: 2
226168907
66282030349
RNCC: 3 | RNVC: 2
226063194
7139001628
RNCC: 3 | RNVC: 2
221257377
446022
RNCC: 3 | RNVC: 2
226152243
X99249
RNCC: 3 | RNVC: 2
7331394005627
RNCC: 5 | RNVC: 2
221209668
2145-011
RNCC: 3 | RNVC: 2
226260607
410.542.000.021.4
RNCC: 3 | RNVC: 2
221209165
33.0220-00
RNCC: 3 | RNVC: 2
K15271
RNCC: 3 | RNVC: 2
222569313
601237
RNCC: 3 | RNVC: 2
5372
RNCC: 5 | RNVC: 2
5372POS32
RNCC: 5 | RNVC: 2
226204863
16.65210
RNCC: 3 | RNVC: 2
226183886
380821
RNCC: 3 | RNVC: 2
226105507
416847
RNCC: 3 | RNVC: 2
226236454
198010
RNCC: 3 | RNVC: 2
221256114
IN174146
RNCC: 3 | RNVC: 2
226260730
410.542.000.011
RNCC: 3 | RNVC: 2
226134921
2838173
RNCC: 3 | RNVC: 2
226216825
1216985
RNCC: 3 | RNVC: 2
226036554
K2
RNCC: 3 | RNVC: 2
226050257
564428
RNCC: 3 | RNVC: 2
221271458
07-95-13
RNCC: 3 | RNVC: 2
221266468
TG-131717
RNCC: 3 | RNVC: 2
221504370
TG-127066 POS A,1,2,3,4,5
RNCC: 3 | RNVC: 2
226201237
344495
RNCC: 3 | RNVC: 2
226036594
TT21253-04
RNCC: 3 | RNVC: 2
223064121
1254943
RNCC: 3 | RNVC: 2
F6400-013687
RNCC: 5 | RNVC: 2
226243541
113470011
RNCC: 3 | RNVC: 2
3470ITP100P63
RNCC: 5 | RNVC: 2
226254175
0741437
RNCC: 3 | RNVC: 2
226063199
7139001016
RNCC: 3 | RNVC: 2
221246637
TG-231601
RNCC: 3 | RNVC: 2
226197603
TG-450431
RNCC: 3 | RNVC: 2
226203600
TG-450635
RNCC: 3 | RNVC: 2
223065198
28X12,2X1,25
RNCC: 3 | RNVC: 2
0576909-000
RNCC: 3 | RNVC: 2
M1182-192164
RNCC: 5 | RNVC: 2
221256093
IN174077
RNCC: 3 | RNVC: 2
226030114
10021203
RNCC: 3 | RNVC: 2
226109386
259548-001
RNCC: 3 | RNVC: 2
226193132
216-03-09-001
RNCC: 3 | RNVC: 2
226139540
PL341N/25
RNCC: 3 | RNVC: 2
PL 341/25N,PROFIL NA77QQ
RNCC: 5 | RNVC: 2
222102420
DUT NR. 16
RNCC: 3 | RNVC: 2
226209760
008E7848
RNCC: 3 | RNVC: 2
226246585
85049102
RNCC: 3 | RNVC: 2
226181217
RM01-5948
RNCC: 3 | RNVC: 2
221264386
SL-33432
RNCC: 3 | RNVC: 2
226113236
BFH-48-0.50
RNCC: 3 | RNVC: 2
222508740
081304502
RNCC: 3 | RNVC: 2
226241286
234540
RNCC: 3 | RNVC: 2
223076150
1276753-001
RNCC: 3 | RNVC: 2
F6400-013886
RNCC: 5 | RNVC: 2
223017693
AS216518-8
RNCC: 2 | RNVC: 2
M1150-150010
RNCC: 5 | RNVC: 2
226234335
6039-005
RNCC: 3 | RNVC: 2
223056740
134883A
RNCC: 3 | RNVC: 2
F6281-012631
RNCC: 5 | RNVC: 2
221191807
TI-IU05289XA
RNCC: 4 | RNVC: 1
226139921
031881504
RNCC: 3 | RNVC: 2
226121028
TG-340560
RNCC: 3 | RNVC: 2
226246695
TT54322-01
RNCC: 3 | RNVC: 2
223058688
6815044-060
RNCC: 3 | RNVC: 2
GL35020-1
RNCC: 3 | RNVC: 2
F6400-022672
RNCC: 5 | RNVC: 2
226176599
91007-0007-045
RNCC: 3 | RNVC: 2
91007-07-045
RNCC: 6 | RNVC: 9
226192150
504689
RNCC: 3 | RNVC: 2
0504689
RNCC: 5 | RNVC: 2
226139537
467932
RNCC: 3 | RNVC: 2
221194453
52093
RNCC: 3 | RNVC: 2
226184517
99328
RNCC: 3 | RNVC: 2
226084643
DBI DUT NR. 36
RNCC: 3 | RNVC: 2
226115821
043287
RNCC: 3 | RNVC: 2
226234252
7414 VK
RNCC: 3 | RNVC: 2
226193376
0747966
RNCC: 3 | RNVC: 2
AC82210-25
RNCC: 5 | RNVC: 2
226245106
BAM00461
RNCC: 3 | RNVC: 2
226232201
344910
RNCC: 3 | RNVC: 2
226190633
RAYRIM-NR9-0
RNCC: 3 | RNVC: 2
134-752
RNCC: 5 | RNVC: 2
226183842
63 878
RNCC: 3 | RNVC: 2
226144078
9141402900
RNCC: 3 | RNVC: 2
222604649
6097402
RNCC: 3 | RNVC: 2
226118056
28714
RNCC: 3 | RNVC: 2
226209815
1217357
RNCC: 3 | RNVC: 2
226150737
1016
RNCC: 3 | RNVC: 2
226143323
181597
RNCC: 3 | RNVC: 2
222604750
6107114
RNCC: 3 | RNVC: 2
226166396
18.506
RNCC: 3 | RNVC: 2
221185181
6124934-001
RNCC: 3 | RNVC: 2
221211282
J710035P1
RNCC: 3 | RNVC: 2
221215322
295518
RNCC: 3 | RNVC: 2
223003173
F1281-404653
RNCC: 3 | RNVC: 2
M1503-171550
RNCC: 5 | RNVC: 2
221251927
402051730
RNCC: 3 | RNVC: 2
402051730
RNCC: 5 | RNVC: 2
226008361
7603420615
RNCC: 3 | RNVC: 2
226018481
13.46007.00
RNCC: 3 | RNVC: 2
226014990
CE05073016
RNCC: 3 | RNVC: 2
226154803
192100317051
RNCC: 3 | RNVC: 2
192100317051
RNCC: 5 | RNVC: 2
226178958
741B0231
RNCC: 3 | RNVC: 2
0498402498
RNCC: 5 | RNVC: 2
226102892
TG-232775
RNCC: 3 | RNVC: 2
223067906
5803148-001
RNCC: 3 | RNVC: 2
222604816
6108652-2
RNCC: 3 | RNVC: 2
222540518
NB31A32
RNCC: 3 | RNVC: 2
C 352A-4
RNCC: 3 | RNVC: 2
226147013
2536 UNF 1 1/16X12
RNCC: 3 | RNVC: 2
226234334
6039-004
RNCC: 3 | RNVC: 2
226072153
003753
RNCC: 3 | RNVC: 2
226012237
1234 11 25
RNCC: 3 | RNVC: 2
221260477
437016
RNCC: 3 | RNVC: 2
226154787
0509103
RNCC: 3 | RNVC: 2
221215870
TG-336147
RNCC: 3 | RNVC: 2
226208134
S-657
RNCC: 3 | RNVC: 2
35-S-657
RNCC: 5 | RNVC: 2
223066091
52657-2
RNCC: 3 | RNVC: 2
226241714
0921693
RNCC: 3 | RNVC: 2
221186939
TI-ER00129E/20
RNCC: 2 | RNVC: 2
226188944
TG 450133
RNCC: 3 | RNVC: 2
222692847
43076M
RNCC: 3 | RNVC: 2
221017352
7L-101-02
RNCC: 3 | RNVC: 2
TG-438598
RNCC: 3 | RNVC: 2
ERICS-21
RNCC: 3 | RNVC: 2
226109429
2000,80,080
RNCC: 3 | RNVC: 2
226092634
275.24.00.11
RNCC: 3 | RNVC: 2
226142018
160B4336
RNCC: 3 | RNVC: 2
226098422
3359
RNCC: 3 | RNVC: 2
3359
RNCC: 3 | RNVC: 2
221263681
1706-0-23-0
RNCC: 3 | RNVC: 2
221196964
TG-222411
RNCC: 3 | RNVC: 2
223058221
700197
RNCC: 3 | RNVC: 2
F6281-004495
RNCC: 5 | RNVC: 2
221253795
TR-0189X
RNCC: 4 | RNVC: 1
221271758
40-05-04
RNCC: 3 | RNVC: 2
221223588
909090
RNCC: 3 | RNVC: 2
223054649
54947
RNCC: 3 | RNVC: 2
226066355
4130 0120 018
RNCC: 3 | RNVC: 2
226143401
BE26888
RNCC: 3 | RNVC: 2
226240126
51079-0012-00
RNCC: 3 | RNVC: 2
223064594
1262675-000
RNCC: 3 | RNVC: 2
F6400-012255
RNCC: 5 | RNVC: 2
226174191
00C42173
RNCC: 3 | RNVC: 2
226178396
N16030866
RNCC: 3 | RNVC: 2
226088424
0891090
RNCC: 3 | RNVC: 2
222847580
683/2/02617
RNCC: 3 | RNVC: 2
226220666
GLZ R 2
RNCC: 3 | RNVC: 2
226262647
424033
RNCC: 3 | RNVC: 2
226127420
TG-341607
RNCC: 3 | RNVC: 2
226062760
310-91810403
RNCC: 3 | RNVC: 2
226250873
51226
RNCC: 3 | RNVC: 2
226200417
WN525 115-25
RNCC: 3 | RNVC: 2
221254388
226 000 702
RNCC: 3 | RNVC: 2
226224890
TG-234617
RNCC: 3 | RNVC: 2
222604792
6108628
RNCC: 3 | RNVC: 2
226248580
TG-234809
RNCC: 3 | RNVC: 2
226163998
298951
RNCC: 3 | RNVC: 2
226085336
6312
RNCC: 3 | RNVC: 2
222690725
412.119
RNCC: 3 | RNVC: 2
226143512
030E4672
RNCC: 3 | RNVC: 2
226047481
5746737205
RNCC: 5 | RNVC: 2
226234406
LAEDERSNOR,RUNDSKAARET,3MM,NATUR
RNCC: 3 | RNVC: 2
226240125
234729
RNCC: 3 | RNVC: 2
226231469
TG-234660
RNCC: 3 | RNVC: 2
221256145
IN174224
RNCC: 3 | RNVC: 2
226255395
ST0071
RNCC: 3 | RNVC: 2
226223080
D09312-001 REV A
RNCC: 3 | RNVC: 2
2 0187-530
RNCC: 5 | RNVC: 2
223057668
F1281-427183
RNCC: 3 | RNVC: 2
226067207
TG-340630
RNCC: 3 | RNVC: 2
223073434
7.408004-01
RNCC: 3 | RNVC: 2
50007308-2
RNCC: 5 | RNVC: 2
221251205
97.370.005-3
RNCC: 3 | RNVC: 2
97.370.005-6.3
RNCC: 5 | RNVC: 2
221251555
417500
RNCC: 3 | RNVC: 2
226205981
100995
RNCC: 3 | RNVC: 2
226154054
90033710
RNCC: 3 | RNVC: 2
226208310
460190421
RNCC: 3 | RNVC: 2
221245771
0106868
RNCC: 3 | RNVC: 2
0104143
RNCC: 6 | RNVC: 9
226213203
0742559
RNCC: 3 | RNVC: 2
226201571
234505
RNCC: 3 | RNVC: 2
221188640
J708992G1
RNCC: 3 | RNVC: 2
MN 6005
RNCC: 5 | RNVC: 2
226189601
22.557
RNCC: 3 | RNVC: 2
226099166
TT15171
RNCC: 3 | RNVC: 2
226143531
030E4902
RNCC: 3 | RNVC: 2
226105324
416828
RNCC: 3 | RNVC: 2
226140477
805270
RNCC: 3 | RNVC: 2
221239103
TR-0662E
RNCC: 2 | RNVC: 2
221151635
9104419
RNCC: 3 | RNVC: 2
222852098
074.055
RNCC: 3 | RNVC: 2
IN074055
RNCC: 3 | RNVC: 2
226030102
10021003
RNCC: 3 | RNVC: 2
226220577
DPE 20 10 20
RNCC: 3 | RNVC: 2
693796
RNCC: 5 | RNVC: 2
226190285
754700
RNCC: 3 | RNVC: 2
226026681
354005140
RNCC: 3 | RNVC: 2
226081797
413480
RNCC: 3 | RNVC: 2
226205417
TG-344475
RNCC: 3 | RNVC: 2
221226909
TG-337726
RNCC: 3 | RNVC: 2
226190606
K690AC
RNCC: 3 | RNVC: 2
226111343
043193
RNCC: 3 | RNVC: 2
226177832
TG.344096
RNCC: 3 | RNVC: 2
226184648
00-554990
RNCC: 3 | RNVC: 2
221138955
630001
RNCC: 3 | RNVC: 2
TYPFWEISZ
RNCC: 5 | RNVC: 9
F
RNCC: 5 | RNVC: 9
226069449
0113
RNCC: 3 | RNVC: 2
226199619
20055416
RNCC: 3 | RNVC: 2
226174524
0219746
RNCC: 3 | RNVC: 2
226179938
2 0066-977
RNCC: 3 | RNVC: 2
223044627
1204141-000
RNCC: 3 | RNVC: 2
F6400-010597
RNCC: 5 | RNVC: 2
226176486
90451-0075-059
RNCC: 3 | RNVC: 2
90451-75-059
RNCC: 6 | RNVC: 9
221241334
VN7L/S
RNCC: 3 | RNVC: 2
6853439-058
RNCC: 5 | RNVC: 2
226253658
51245
RNCC: 3 | RNVC: 2
226163662
14013055
RNCC: 3 | RNVC: 2
14013055
RNCC: 3 | RNVC: 2
222547308
31391
RNCC: 3 | RNVC: 2
226193684
344237
RNCC: 3 | RNVC: 2
226076742
2327
RNCC: 3 | RNVC: 2
226031215
SXK1089155
RNCC: 3 | RNVC: 2
SXK1089155
RNCC: 5 | RNVC: 2
226245374
UVHGM25 80
RNCC: 3 | RNVC: 2
226081155
1412-3/4L
RNCC: 3 | RNVC: 2
221503111
58232048
RNCC: 3 | RNVC: 2
1.7/8IN-BOEJLE
RNCC: 5 | RNVC: 2
82308
RNCC: 5 | RNVC: 2
3277490823083
RNCC: 5 | RNVC: 2
1859
RNCC: 5 | RNVC: 9
226155554
MFT803
RNCC: 3 | RNVC: 2
226105347
CY 304 N
RNCC: 3 | RNVC: 2
226050174
2420-4327.00
RNCC: 3 | RNVC: 2
226073837
099 940
RNCC: 3 | RNVC: 2
221256149
IN174238
RNCC: 3 | RNVC: 2
226228671
110550
RNCC: 3 | RNVC: 2
BERA55ZINK
RNCC: 3 | RNVC: 2
55
RNCC: 5 | RNVC: 2
221246187
916100-30107-A
RNCC: 3 | RNVC: 2
100-91630107
RNCC: 5 | RNVC: 2
226231931
344874
RNCC: 3 | RNVC: 2
226115962
078306
RNCC: 3 | RNVC: 2
226205978
100993
RNCC: 3 | RNVC: 2
226143532
160B4347
RNCC: 3 | RNVC: 2
226203327
TG-234373
RNCC: 3 | RNVC: 2
226224914
TG-234634
RNCC: 3 | RNVC: 2
226220953
236401
RNCC: 3 | RNVC: 2
221503608
58232076
RNCC: 3 | RNVC: 2
3IN-BOEJLE
RNCC: 5 | RNVC: 2
3277490823175
RNCC: 5 | RNVC: 2
82317
RNCC: 5 | RNVC: 2
1867
RNCC: 5 | RNVC: 9
00023-401-C-3
RNCC: 5 | RNVC: 9
226106472
045
RNCC: 5 | RNVC: 2
226025892
060 125
RNCC: 3 | RNVC: 2
226249268
397720
RNCC: 3 | RNVC: 2
226124700
690526006084
RNCC: 3 | RNVC: 2
226062663
824236
RNCC: 3 | RNVC: 2
226046029
16D1700-233
RNCC: 3 | RNVC: 2
226105550
416865
RNCC: 3 | RNVC: 2
222581132
2034028-0
RNCC: 3 | RNVC: 2
226178963
2 0119-865
RNCC: 3 | RNVC: 2
226248096
4460991071
RNCC: 3 | RNVC: 2
226251777
EN43AG20060157
RNCC: 3 | RNVC: 2
226252068
TT54317
RNCC: 3 | RNVC: 2
226254476
0320074
RNCC: 3 | RNVC: 2
226250872
51220
RNCC: 3 | RNVC: 2
221218128
9998261150
RNCC: 3 | RNVC: 2
226251402
RP692138
RNCC: 3 | RNVC: 2
226255260
0542 25 20
RNCC: 3 | RNVC: 2
221167667
TG-439460
RNCC: 3 | RNVC: 2
226224300
CUP10637
RNCC: 3 | RNVC: 2
226242820
10074
RNCC: 3 | RNVC: 2
223017705
AS216519-6
RNCC: 2 | RNVC: 2
M1150-168010
RNCC: 5 | RNVC: 2
226064695
66-111-23
RNCC: 3 | RNVC: 2
226225211
234454-08
RNCC: 3 | RNVC: 2
226240901
RM 01-160-0
RNCC: 3 | RNVC: 2
226081182
893 867 299
RNCC: 3 | RNVC: 2
226244460
345186
RNCC: 3 | RNVC: 2
226204929
TG344624
RNCC: 3 | RNVC: 2
226105695
416774
RNCC: 3 | RNVC: 2
226139538
805415
RNCC: 3 | RNVC: 2
226178442
450100
RNCC: 3 | RNVC: 2
226201580
01229855
RNCC: 3 | RNVC: 2
01229855
RNCC: 3 | RNVC: 2
226051159
TG340796
RNCC: 3 | RNVC: 2
221151064
250X250X4CM,BRINELHAARDH.200-300
RNCC: 3 | RNVC: 2
221232368
TG-338035
RNCC: 3 | RNVC: 2
226253524
VSGP2518J
RNCC: 3 | RNVC: 2
222850363
89 11 07 ITEM 093 SMK VBE SPEC
RNCC: 2 | RNVC: 2
VENSTRE VINKELSAET, SAILOR RT146
RNCC: 5 | RNVC: 1
226046611
1-31-040
RNCC: 3 | RNVC: 2
226155955
60400024
RNCC: 3 | RNVC: 2
222584331
A53101100
RNCC: 3 | RNVC: 2
223057547
67581
RNCC: 3 | RNVC: 2
F6281-004275
RNCC: 5 | RNVC: 2
226130658
193263
RNCC: 3 | RNVC: 2
226089073
4.468.566.025
RNCC: 3 | RNVC: 2
226003589
VVS019047069
RNCC: 3 | RNVC: 2
226178135
TG.344117
RNCC: 3 | RNVC: 2
222574403
032F0086
RNCC: 3 | RNVC: 2
32F0086
RNCC: 3 | RNVC: 2
32F0086
RNCC: 5 | RNVC: 2
DAN BIND 8 KATALOG RU-02 SIDE 28
RNCC: 6 | RNVC: 9
226002656
36101-ZE1-010
RNCC: 3 | RNVC: 2
226127809
20.43.02
RNCC: 3 | RNVC: 2
226116267
358246
RNCC: 3 | RNVC: 2
222692838
43027M
RNCC: 3 | RNVC: 2
221211052
239 000 005
RNCC: 3 | RNVC: 2
226054952
200613
RNCC: 3 | RNVC: 2
226210772
X20.16.07
RNCC: 3 | RNVC: 2
221218874
TYPE 105, 90X105X105MM
RNCC: 3 | RNVC: 2
5701953071059
RNCC: 5 | RNVC: 2
226171991
234194
RNCC: 3 | RNVC: 2
226177860
TG.234147
RNCC: 3 | RNVC: 2
226168582
0220465
RNCC: 3 | RNVC: 2
223056736
134864
RNCC: 3 | RNVC: 2
F6281-002304
RNCC: 5 | RNVC: 2
226193549
0751986
RNCC: 3 | RNVC: 2
AC82200-58
RNCC: 5 | RNVC: 2
226250308
51215-0200
RNCC: 3 | RNVC: 2
222573349
4727309-01
RNCC: 3 | RNVC: 2
472730901
RNCC: 3 | RNVC: 2
222692844
430483M
RNCC: 3 | RNVC: 2
221209808
D10391-001
RNCC: 3 | RNVC: 2
D10391-001
RNCC: 5 | RNVC: 9
226252337
51237-1000
RNCC: 3 | RNVC: 2
223037848
F1250-402792
RNCC: 3 | RNVC: 2
B-20,2
RNCC: 3 | RNVC: 2
M1503-752202
RNCC: 5 | RNVC: 2
223058395
50004444-000
RNCC: 3 | RNVC: 2
IN5000444-000
RNCC: 6 | RNVC: 9
226081159
1412-3/4R
RNCC: 3 | RNVC: 2
221186948
TI-ER00129E/10
RNCC: 2 | RNVC: 2
221255667
TG-231902
RNCC: 3 | RNVC: 2
226246017
4281010
RNCC: 3 | RNVC: 2
226147009
2530 UNF 3/4X16
RNCC: 3 | RNVC: 2
221226892
SL-31972
RNCC: 3 | RNVC: 2
221210877
D11292-010
RNCC: 3 | RNVC: 2
D11292-010
RNCC: 5 | RNVC: 9
226183833
41625200
RNCC: 3 | RNVC: 2
226234902
0230117
RNCC: 3 | RNVC: 2
226227143
70191652
RNCC: 3 | RNVC: 2
SPARE PARTS 2179 082
RNCC: 6 | RNVC: 9
226205087
TG-132505
RNCC: 3 | RNVC: 2
222840377
SGA 12
RNCC: 3 | RNVC: 2
226203708
01238915
RNCC: 3 | RNVC: 2
226250119
106972
RNCC: 3 | RNVC: 2
226246876
51214
RNCC: 3 | RNVC: 2
226111704
043032
RNCC: 3 | RNVC: 2
226005808
N90847501
RNCC: 3 | RNVC: 2
226177872
TG.343071
RNCC: 3 | RNVC: 2
226025983
A32,41
RNCC: 3 | RNVC: 2
221183715
AM910
RNCC: 3 | RNVC: 2
226262652
424039
RNCC: 3 | RNVC: 2
226202351
904102
RNCC: 3 | RNVC: 2
226132127
110P0150
RNCC: 3 | RNVC: 2
5703302018647
RNCC: 3 | RNVC: 2
1028001213
RNCC: 5 | RNVC: 2
226197502
C043501
RNCC: 3 | RNVC: 2
226234352
234757
RNCC: 3 | RNVC: 2
226229926
51113
RNCC: 3 | RNVC: 2
222508716
080787001
RNCC: 3 | RNVC: 2
226104943
1599844
RNCC: 3 | RNVC: 2
226221244
12462
RNCC: 3 | RNVC: 2
226047026
370798
RNCC: 3 | RNVC: 2
221210865
D10124-001
RNCC: 3 | RNVC: 2
D10124-001
RNCC: 5 | RNVC: 9
226203331
TG-234375
RNCC: 3 | RNVC: 2