What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 98 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 98 of 178

5340-12-378-2046
Access Cover

123782046
9997023-205710.000.0: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-12-323-9094
Flush Lock

123239094
200-9005-0342.1.0011-0428-0004: RNCC: 3 | RNVC: 2
1000-U7/U249/13/990: RNCC: 3 | RNVC: 2
02962000/02611270/02005480: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-12-344-5897
Butt Hinge Leaf

123445897
J5282005-005: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-324-9705
Nonmetallic Bumper

123249705
60476-001: RNCC: 3 | RNVC: 2
60 476-001: RNCC: 5 | RNVC: 9

17 Apr 1991

5340-12-339-8300
Pad Eye

123398300
2654-330500.01: RNCC: 2 | RNVC: 2
2654-330500.01: RNCC: 3 | RNVC: 2
K6084-1200.01: RNCC: 5 | RNVC: 9
2654-330 500.01: RNCC: 5 | RNVC: 9
2654-330 500.01: RNCC: 5 | RNVC: 9

23 Jan 1996

5340-12-322-6459
Angle Bracket

123226459
42205252: RNCC: 3 | RNVC: 2
42205252EZ5003-09: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-357-5926
Mending Plate

123575926
2500261-991410.001.0: RNCC: 2 | RNVC: 2
2500261-991410.001.0: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-12-362-6648
Mounting Plate

123626648
2500262-830031.000.0: RNCC: 2 | RNVC: 2
2500262-830031.000.0: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-192-8624
Nonmetallic Bumper

121928624
4609870240: RNCC: 3 | RNVC: 2
721 1 87 047 1: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-302-6160
Double Angle Bracket

123026160
YK03331851: RNCC: 3 | RNVC: 2
H.B.913SV 1056 1975 03 33 1851: RNCC: 5 | RNVC: 9
03331851: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-349-8049
Padlock Set

123498049
51 25 1 455 109: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-701-2689
Mounting Bracket

127012689
5.12.4805.1100.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-316-4772
Angle Bracket

123164772
22012.0.11.000.05: RNCC: 2 | RNVC: 2
22012.0.11.000.05: RNCC: 3 | RNVC: 2

19 Jan 1989

5340-12-385-5572
Webbing Strap

123855572
10187-188411.001.0: RNCC: 2 | RNVC: 2
10187-188411.001.0: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-340-7735
Webbing Strap

123407735
5801984-981118.000.0: RNCC: 2 | RNVC: 2
5801984-981118.000.0: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-353-9826
Quick Release Plunger

123539826
GN617.1-8-A-NI: RNCC: 3 | RNVC: 2

23 May 2001

5340-12-363-5103
Door Handle Unit

123635103
1123-U8-6: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-302-8340
Mending Plate

123028340
4900123-620021.03: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-171-1866
Mending Plate

121711866
81415010205: RNCC: 3 | RNVC: 2
23250-014601-001-0: RNCC: 5 | RNVC: 9
23250-014601.001.0: RNCC: 5 | RNVC: 9

16 Sep 1977

5340-12-357-3659
Dust And Moisture Seal Boot

123573659
D35KCP002: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-12-176-8298
Nonmetallic Bumper

121768298
51961010041: RNCC: 3 | RNVC: 2

20 Dec 1978

5340-12-323-5077
Plain Solid Disk

123235077
1107680: RNCC: 3 | RNVC: 2
4003.165.00.00.059: RNCC: 5 | RNVC: 2
4003.165.00/59: RNCC: 5 | RNVC: 2
1107680: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-350-4338
Section Block Clamp

123504338
JN0413CC30: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-316-8704
Mounting Bracket

123168704
1916121-1: RNCC: 3 | RNVC: 2

20 Feb 1989

5340-12-186-0423
Expansion Shield

121860423
9-35: RNCC: 3 | RNVC: 9
00110010: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-394-0256
Mounting Bracket

123940256
L311M1603110: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-307-6636
Dust And Moisture Seal Protective Plug

123076636
A11A330010011: RNCC: 3 | RNVC: 2

14 Jul 1986

5340-12-316-2625
Strap Hinge

123162625
1000175-6000.02: RNCC: 2 | RNVC: 2
1000175-6000.02: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-12-314-6709
Electrical-Mechanical Equipment Post

123146709
512214-3762.000: RNCC: 3 | RNVC: 2
512214-3762: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-328-9053
Headless Straight Rod

123289053
SK2504-17: RNCC: 3 | RNVC: 2
2490556: RNCC: 5 | RNVC: 2
5000821600: RNCC: 5 | RNVC: 2
SK2504-17: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-344-8926
Bow Handle

123448926
U15.143200.00-00: RNCC: 3 | RNVC: 2

8 Jan 1998

5340-12-374-9099
Butt Hinge

123749099
1914.025.00.0: RNCC: 3 | RNVC: 2
71617202001: RNCC: 5 | RNVC: 2
A10.0130.00: RNCC: 5 | RNVC: 2
7161720200: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-12-380-4720
Mounting Bracket

123804720
01.130.935.7: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-700-9241
Loop Clamp

127009241
VG95211-ML-127009241: RNCC: 2 | RNVC: 2
200N7-130: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-311-2534
Electrical-Mechanical Equipment Post

123112534
61637-625: RNCC: 3 | RNVC: 2
KB-61637-625: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-368-1328
Angle Bracket

123681328
5161-370202A00C: RNCC: 2 | RNVC: 2
5161-370202A00C: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-702-4198
Mounting Bracket

127024198
VG95211-ML-127024198: RNCC: 2 | RNVC: 2
5.12.7070.1220.11: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-341-6258
Angle Bracket

123416258
81482400016: RNCC: 3 | RNVC: 2
81-48240-0016: RNCC: 5 | RNVC: 2
81.48240.0016: RNCC: 5 | RNVC: 2

3 Oct 1996

5340-12-363-8471
Angle Bracket

123638471
J28230028-403: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-702-2239
Mounting Bracket

127022239
VG95211-ML-127022239: RNCC: 2 | RNVC: 2
30.7601.70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-173-2726
Handwheel

121732726
000975-1611-0003-0000-00: RNCC: 3 | RNVC: 9

3 Apr 1978

5340-12-353-8223
Loop Clamp

123538223
JN0205-267: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-350-5562
Mounting Bracket

123505562
2500239-150000.002.0: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-12-333-9167
Mounting Bracket

123339167
404-5-27: RNCC: 3 | RNVC: 2
404-5.27: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-12-340-9200
Webbing Strap

123409200
55.05.99/0: RNCC: 3 | RNVC: 2
2988-005100.900.0: RNCC: 5 | RNVC: 2
55.05.00/0-5000MM: RNCC: 5 | RNVC: 2

3 Jul 1996

5340-12-091-7015

5340-12-362-9257
Cremone Bolt

123629257
3.30.0124.0: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-12-300-6683
Angle Bracket

123006683
4424261140: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-362-1578
Mounting Bracket

123621578
2300298-972014.000.0: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-358-6452
Angle Bracket

123586452
2500262-394300.026.0: RNCC: 2 | RNVC: 2
2500262-394300.026.0: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-392-2133
Spring Holder

123922133
DW 400 877 A: RNCC: 3 | RNVC: 2
DW 400 877 A: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-376-2847
Rim Lock

123762847
1-36-37198-550: RNCC: 3 | RNVC: 2
1-36-37198-550: RNCC: 5 | RNVC: 9

5 Sep 2008

5340-12-360-2752
Angle Bracket

123602752
000611-216000.00: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-364-6680
Helical Compression Spring Seat

123646680
2D0407183A: RNCC: 3 | RNVC: 2
9013231185: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-12-355-4597
Angle Bracket

123554597
0008350312: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-12-357-1016
Loop Clamp

123571016
EN4114F04WH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-373-9055
Loop Clamp

123739055
5546780: RNCC: 2 | RNVC: 2
5546780: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-12-305-3604
Nonmetallic Bumper

123053604
2019880211: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-12-345-5986
Double Angle Bracket

123455986
03768300: RNCC: 3 | RNVC: 2
03768300.662: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-12-351-0463
Mending Plate

123510463
78024 97001: RNCC: 2 | RNVC: 2
7802497001: RNCC: 3 | RNVC: 2
78024 97001: RNCC: 5 | RNVC: 9

19 Jun 2000

5340-12-351-7526
Door Button

123517526
8424210: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-351-4792
Dust And Moisture Seal Protective Cap

123514792
6010700055: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-12-387-7211
Pipe Hanger

123877211
83621217: RNCC: 3 | RNVC: 2
EMBAS00003: RNCC: 5 | RNVC: 2

26 Jan 2012

5340-12-199-1355
Resilient Mount

121991355
622701-01: RNCC: 3 | RNVC: 9
5112-58-02.02: RNCC: 5 | RNVC: 2
03411067: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-386-8190
Manual Control Lever

123868190
M4-0057B RED FP: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-12-186-6206
Expansion Plug

121866206
DIN443-17: RNCC: 2 | RNVC: 2
06150900210: RNCC: 5 | RNVC: 2
17DIN443: RNCC: 5 | RNVC: 2

21 Jan 1981

5340-12-155-0544
Clamping Catch

121550544
VG95136A34X35: RNCC: 2 | RNVC: 2
VG95136-A34X35: RNCC: 3 | RNVC: 2
VG95136A34X35: RNCC: 3 | RNVC: 2
602K0151-000-00.3: RNCC: 3 | RNVC: 2
500.071: RNCC: 3 | RNVC: 2
0008900489: RNCC: 5 | RNVC: 2
VG95136A34X35: RNCC: 5 | RNVC: 9
602K0151: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-6903
Access Door Hinge

123706903
365/1611-16-11-00: RNCC: 3 | RNVC: 2
E19286: RNCC: 5 | RNVC: 2

11 Dec 2006

5340-12-188-1795
Halter

121881795
409037025: RNCC: 3 | RNVC: 2
38 702-038: RNCC: 5 | RNVC: 2
38702-038: RNCC: 5 | RNVC: 2
409.037025: RNCC: 5 | RNVC: 2
409-037025: RNCC: 5 | RNVC: 9

11 Jun 1981

5340-12-357-4925
Mounting Bracket

123574925
A-087118-031: RNCC: 3 | RNVC: 2
A087118-031: RNCC: 5 | RNVC: 2

26 Jun 2002

5340-12-317-7982
Dust And Moisture Seal Protective Cap-Plug

123177982
84053/1200-15: RNCC: 3 | RNVC: 2
84053-2201: RNCC: 5 | RNVC: 9
84053/1200-15: RNCC: 5 | RNVC: 9

12 May 1989

5340-12-164-3638
Nonmetallic Bumper

121643638
2360-262310.10.0: RNCC: 3 | RNVC: 2
2360-262310.10.0: RNCC: 5 | RNVC: 2
2360-262310-10-0: RNCC: 5 | RNVC: 2
2360-262310.10.0: RNCC: 5 | RNVC: 2
2360-262310-10-0: RNCC: 5 | RNVC: 9
2360-262310.10.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-7992
Mounting Bracket

123267992
790-11.13.000-99E: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-12-330-4870
Door Button

123304870
6600153-982120.004.0: RNCC: 2 | RNVC: 2
6600153-982120.004.0: RNCC: 3 | RNVC: 2

22 Dec 1992

5340-12-312-2521
Double Angle Bracket

123122521
1697471: RNCC: 3 | RNVC: 2
75E5.21.51-4: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-12-352-0605
Mounting Bracket

123520605
3108809: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-12-367-2259
Dust And Moisture Seal Protective Cap

123672259
028145291B: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-159-0325
Angle Bracket

121590325
8381594040: RNCC: 3 | RNVC: 2
600462: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-394-1204
Mounting Bracket

123941204
M5537360420200: RNCC: 3 | RNVC: 2

6 Nov 2013

5340-12-355-9608
Coat And Hat Hook

123559608
6210025: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-350-0061
Dust And Moisture Seal Protective Plug

123500061
88960020079: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-338-4632
Turnbuckle

123384632
LN9185 K 07 M: RNCC: 2 | RNVC: 2
LN9185M7K: RNCC: 5 | RNVC: 9

13 Jul 1995

5340-12-334-8133
Retaining Strap

123348133
52.0099.793.03: RNCC: 2 | RNVC: 2
52.0099.793.03: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-355-9333
Access Cover

123559333
321190: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-12-020-7574

5340-12-324-5247
Sealing Plug Assembly

123245247
LW32-MB1-0: RNCC: 3 | RNVC: 2

26 Feb 1991

5340-12-303-9882
Retaining Strap

123039882
K6270: RNCC: 3 | RNVC: 2
KLPKSF88.30-2: RNCC: 5 | RNVC: 2

29 May 1985

5340-12-195-6312
Dust And Moisture Seal Protective Cap

121956312
ST004-D: RNCC: 3 | RNVC: 2
141324: RNCC: 5 | RNVC: 9

21 Mar 1983

5340-12-379-6143
Casement Fastener

123796143
520580: RNCC: 3 | RNVC: 2
03-07313-00-15-06A: RNCC: 5 | RNVC: 2

17 Aug 2009

5340-12-341-9171
Resilient Mount

123419171
DIN95363-D35X15-M8X20-CR57ST: RNCC: 2 | RNVC: 2
3225040212: RNCC: 5 | RNVC: 2
3225040212: RNCC: 5 | RNVC: 2

15 Nov 1996

5340-12-368-8386
Dust And Moisture Seal Protective Cap

123688386
81960020503: RNCC: 3 | RNVC: 2
81.96002-0503: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-12-344-4051
Nonmetallic Bumper

123444051
R50317: RNCC: 3 | RNVC: 2
R50317: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-170-1170
Mending Plate

121701170
510075144: RNCC: 3 | RNVC: 2

27 Jun 1977

5340-12-197-3680
Metal Runner

121973680
C42145-A7-C878: RNCC: 3 | RNVC: 2
5800579-800801.028: RNCC: 5 | RNVC: 2

17 Oct 1983

5340-12-166-5952
Helical Compression Spring Retainer

121665952
WW 425 443 B: RNCC: 2 | RNVC: 2
WW 425 443 B: RNCC: 3 | RNVC: 9
WW 425 443 B: RNCC: 5 | RNVC: 2
WW425443A: RNCC: 5 | RNVC: 9
WW 425 443 A: RNCC: 5 | RNVC: 9
WW425443A: RNCC: 5 | RNVC: 9
WW 425 443 A: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-391-9989
Access Cover

123919989
5030004-851210.002.0: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-12-378-6266
Angle Bracket

123786266
58R052-67126-2: RNCC: 2 | RNVC: 2
58R052-67126-2: RNCC: 3 | RNVC: 2

27 Apr 2009

5340-12-313-5338
Helical Compression Spring Seat

123135338
1420500010: RNCC: 3 | RNVC: 2
1 420 500 010: RNCC: 5 | RNVC: 2
0128 8451: RNCC: 5 | RNVC: 2

13 Apr 1988

5340-12-368-5089
Webbing Strap

123685089
1030099-185113.000.0: RNCC: 2 | RNVC: 2
1030099-185113.000.0: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-12-319-8676
Loop Clamp

123198676
52311: RNCC: 3 | RNVC: 2

10 Nov 1989

5340-12-344-1086
Access Cover

123441086
8702000041: RNCC: 3 | RNVC: 2

12 Sep 1997

5340-12-126-3583
Leather Strap

121263583
NO PRIMARY REF 12-126-3583: RNCC: 3 | RNVC: 2
DIN6408-A16X315-ANGEBRAEUNT,GENI: RNCC: 5 | RNVC: 9
DIN6408-A16X315-GEBRAEUNT,GENIE.: RNCC: 5 | RNVC: 9
DIN6408-A16X315-GEBRAEUNT,GENIE.: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-8482
Double Angle Bracket

123638482
J28630074-401: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-316-1820
Catch Strike

123161820
7400001-201610.06: RNCC: 3 | RNVC: 2
7400001-201610.06: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-354-4296
Flush Catch Claw

123544296
VG95211-ML-123544296: RNCC: 2 | RNVC: 2
M20650: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-12-364-4435
Access Cover

123644435
2300425-182514.000.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-702-5544
Loop Clamp

127025544
VG95211-ML-127025544: RNCC: 2 | RNVC: 2
5.51.7220.0560.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-4392
Mounting Bracket

123144392
P-296814-443: RNCC: 3 | RNVC: 2
P296814-443: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-703-3158
Angle Bracket

127033158
VG95211-ML-127033158: RNCC: 2 | RNVC: 2
5.12.6101.1040.91: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-147-1569
Retaining Strap

121471569
DIN72573-3X6-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-3X6-ST-ZN: RNCC: 3 | RNVC: 2
DIN72573-3X6-ST: RNCC: 5 | RNVC: 9
005320: RNCC: 5 | RNVC: 9
3X6DIN72573ST: RNCC: 5 | RNVC: 9
3X6DIN72573STR0H: RNCC: 5 | RNVC: 9
DIN72573-3X6-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-0663
Crank Handle

123510663
2339-210000A10B: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-12-307-5843
Angle Bracket

123075843
P-244539-755: RNCC: 3 | RNVC: 2
P244539-755: RNCC: 5 | RNVC: 2

4 Jul 1986

5340-12-301-2041
Angle Bracket

123012041
A-245476-757: RNCC: 3 | RNVC: 2
A245476-757: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-328-9611
Electrical-Mechanical Equipment Post

123289611
VG95148B8XM4X22,7-NRST: RNCC: 2 | RNVC: 2
CF 802 542 A: RNCC: 2 | RNVC: 2
CF 802 542 A: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-309-5625
Transom Chain

123095625
5800267-1483.3: RNCC: 2 | RNVC: 2
DIN5686-0,8-100MM LANG VERZINKT: RNCC: 2 | RNVC: 2
C22155-A3-C324: RNCC: 5 | RNVC: 2

4 Feb 1987

5340-12-333-5330
Resilient Mount

123335330
DIN95363-C40X30-NBR60ST: RNCC: 2 | RNVC: 2
520023-M8.NBR60.ST: RNCC: 5 | RNVC: 2
VG95363-C40X30-NBR60ST: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-12-351-2156
Mechanical Stop

123512156
3060-00-311130.05: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-339-2581
Door Button

123392581
1048-U1: RNCC: 3 | RNVC: 2
0.26.0610.0 XX130: RNCC: 3 | RNVC: 2
200-9205: RNCC: 3 | RNVC: 2

31 Oct 1995

5340-12-166-8434
Rigid Caster

121668434
BK-STARU-BS180RO: RNCC: 3 | RNVC: 2
100ABSTARUS180MM: RNCC: 5 | RNVC: 9
226-69-7Z0LL: RNCC: 5 | RNVC: 9

23 Oct 1976

5340-12-358-9667
Access Cover

123589667
J53230181-407: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-198-9437
Access Door

121989437
NO PRIMARY REF 12-198-9437: RNCC: 3 | RNVC: 2
15-1.6770-1-8 AUSF.1: RNCC: 5 | RNVC: 9
1.6899-15-1.6770 AUSF.1: RNCC: 5 | RNVC: 9
1.6899-15-1.6770-1-8 AUSF 1: RNCC: 5 | RNVC: 9
15-1-6770-1-8-1: RNCC: 5 | RNVC: 9
15-1.6770 AUSF.1: RNCC: 5 | RNVC: 9

14 Mar 1984

5340-12-326-3995
Nonmetallic Bumper

123263995
714-001300-915-0: RNCC: 2 | RNVC: 2
714-001300-915-0: RNCC: 3 | RNVC: 2
PLATTE650X25X2-5.5701.9: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-12-353-0868
Angle Bracket

123530868
529-120800.10.0: RNCC: 3 | RNVC: 2
1111445: RNCC: 5 | RNVC: 2

25 Jan 2001

5340-12-357-7828
Webbing Strap

123577828
20020/4-2-01253U: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-12-316-6938
Resilient Mount

123166938
H95-216-100-138-6-FF: RNCC: 3 | RNVC: 2
1.794923: RNCC: 5 | RNVC: 2

2 Feb 1989

5340-12-348-2729
Dust And Moisture Seal Protective Cap

123482729
HP-006-5-01-0: RNCC: 3 | RNVC: 2

20 May 1999

5340-12-341-2141
Mounting Bracket

123412141
2300211-208242.009.0: RNCC: 2 | RNVC: 2
2300211-208242.009.0: RNCC: 3 | RNVC: 2

9 Aug 1996

5340-12-378-3418
Rod End Connector

123783418
SK1121-181004.001.0: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-302-9340
Bridge Clamp

123029340
2382-020000.003.0: RNCC: 2 | RNVC: 2
2382-020000.003.0: RNCC: 3 | RNVC: 2
2382-020000.003.0: RNCC: 5 | RNVC: 2
2382-020000.003.0: RNCC: 5 | RNVC: 9

8 Feb 1985

5340-12-168-1136
Hand Crank

121681136
DIN468-D125X17-GT: RNCC: 2 | RNVC: 2
WW412215CR: RNCC: 5 | RNVC: 2
WW 412 215 CR: RNCC: 5 | RNVC: 2
WW412215CR: RNCC: 5 | RNVC: 2
D125X17DIN468GT: RNCC: 5 | RNVC: 2
WW412215CR: RNCC: 5 | RNVC: 2

18 Feb 1977

5340-12-320-0048
Extension Drawer Slide

123200048
GM301-305-X-LE: RNCC: 3 | RNVC: 2

27 Nov 1989

5340-12-389-8428
Loop Clamp

123898428
DIN3016-1-A1-28X25-W1-2: RNCC: 2 | RNVC: 2
7116892: RNCC: 5 | RNVC: 2

30 Aug 2012

5340-12-306-1600
Mending Plate

123061600
957-100000-16-0: RNCC: 3 | RNVC: 2
957-100000-16-0: RNCC: 5 | RNVC: 9

31 Jan 1986

5340-12-344-6240
Dust And Moisture Seal Protective Cap

123446240
04.A1.10-100.01: RNCC: 3 | RNVC: 2
04.A1.10 I-100.01: RNCC: 5 | RNVC: 2
DWG 04.A1.10-100.02 PE-SCHUTZKAP: RNCC: 5 | RNVC: 9

17 Nov 1997

5340-12-155-8409
Nonmetallic Bumper

121558409
250146-193440-01-0: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-1104
Runner

123501104
2300348-060086.000.0: RNCC: 2 | RNVC: 2
2300348-060086.000.0: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-12-701-9193
Loop Clamp

127019193
VG95211-ML-127019193: RNCC: 2 | RNVC: 2
T-2-34-15-20-BP GOST 17679-80: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-347-5783
Access Cover

123475783
2300421-181155.000.5: RNCC: 2 | RNVC: 2
99156395: RNCC: 3 | RNVC: 2
2300421-181155.000.5: RNCC: 5 | RNVC: 2
2300421-181155.000.5: RNCC: 5 | RNVC: 9
99156395: RNCC: 5 | RNVC: 9

11 Jan 1999

5340-12-027-5858

5340-12-358-7085
Dust And Moisture Seal Protective Cover

123587085
2800-392800.008.0: RNCC: 2 | RNVC: 2
2800-392800.008.0: RNCC: 3 | RNVC: 2

7 Nov 2002

5340-12-022-3442

5340-12-386-1409
Rod End Clevis

123861409
2500262-970642.000.0: RNCC: 2 | RNVC: 2
2500262-970642.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-346-7608
Metallic Bumper

123467608
09.999.130.0: RNCC: 3 | RNVC: 2

8 Sep 1998

5340-12-349-4509
Spacing Threaded Standoff

123494509
5.04.301: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-305-1259
Dust And Moisture Seal Protective Cap

123051259
01TC34602: RNCC: 3 | RNVC: 2

30 Sep 1985

5340-12-364-4495
Spacing Threaded Standoff

123644495
54.1107.500.04: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-350-4454
Clamping Catch

123504454
505.099: RNCC: 3 | RNVC: 2
7769644: RNCC: 5 | RNVC: 2

31 Mar 2000

5340-12-301-5591
Manual Control Handle

123015591
00738900: RNCC: 3 | RNVC: 2
00738900.344: RNCC: 5 | RNVC: 9

24 Oct 1984

5340-12-328-6821
Angle Bracket

123286821
160-73447: RNCC: 3 | RNVC: 2
160-73447: RNCC: 5 | RNVC: 9

13 Jun 1992

5340-12-303-5768
Angle Bracket

123035768
52.0262.074.00: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-365-7073
Angle Bracket

123657073
5411870140: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-303-9908
Bow Handle

123039908
8450020108: RNCC: 3 | RNVC: 2
84500 20108: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-043-7142

5340-12-313-2455
Rod End Connector

123132455
2300013-5560.11: RNCC: 2 | RNVC: 2
2300013-5560.11: RNCC: 3 | RNVC: 2
2300013-5560.11: RNCC: 5 | RNVC: 2
2300013-5560.11: RNCC: 5 | RNVC: 9

15 Mar 1988

5340-12-331-9862
Protection Bellows

123319862
H1750: RNCC: 3 | RNVC: 2
H1750A: RNCC: 5 | RNVC: 2
0003530290: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-12-332-8487
Hinge Torsion Bar

123328487
81671650043: RNCC: 2 | RNVC: 2
81671650043: RNCC: 3 | RNVC: 2
81.67165.0043: RNCC: 5 | RNVC: 2

27 Sep 1993

5340-12-174-9167
Flush Lock

121749167
6000138: RNCC: 3 | RNVC: 2
375944196: RNCC: 5 | RNVC: 9
375944196: RNCC: 5 | RNVC: 9

7 Aug 1978

5340-12-373-5387
Retaining Clip

123735387
0080980000: RNCC: 3 | RNVC: 2
008098 0000: RNCC: 5 | RNVC: 2

13 Nov 2007

5340-12-357-1693
Dust And Moisture Seal Protective Cover

123571693
42.000.108: RNCC: 3 | RNVC: 9

14 May 2002

5340-12-122-6438
Stift

121226438
4049900738: RNCC: 3 | RNVC: 2
654041123700: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-5021
Manual Control Handle

121875021
15670: RNCC: 3 | RNVC: 2
ZG 15670: RNCC: 5 | RNVC: 2
ZG15670: RNCC: 5 | RNVC: 2
DRWG. NO. 15670: RNCC: 5 | RNVC: 9

10 Apr 1981

5340-12-198-3368
Dust And Moisture Seal Protective Cap

121983368
330148-9002.000: RNCC: 2 | RNVC: 2
330148-9002.000: RNCC: 3 | RNVC: 2
330148-9002.000: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-331-1831
Mounting Plate

123311831
702-445100-901-0: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-12-701-7165
Mounting Plate

127017165
VG95211-ML-127017165: RNCC: 2 | RNVC: 2
5.12.7601.8110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-189-4193
Nonmetallic Bumper

121894193
DIN95364-A18X7,5-NR40ST: RNCC: 2 | RNVC: 2
1.18.7,5.4.40NR/ST: RNCC: 5 | RNVC: 2
1.18.7,5.4.40NRST: RNCC: 5 | RNVC: 2
81130-18X7,5-M6X16.NR40.ST: RNCC: 5 | RNVC: 2
57810430007: RNCC: 5 | RNVC: 2
811.030.018.007,5.06X16.NR40.ST: RNCC: 5 | RNVC: 2
781 043 WEICH: RNCC: 5 | RNVC: 2
781043WEICH: RNCC: 5 | RNVC: 2
VG95364-A18X7,5-NR40ST: RNCC: 5 | RNVC: 9

24 Sep 1981

5340-12-147-2542
Elbow Catch

121472542
AW7100-264-1: RNCC: 3 | RNVC: 2
132197: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-329-6026
Nonmetallic Bumper

123296026
A-616830-007: RNCC: 3 | RNVC: 2
A616830-007: RNCC: 5 | RNVC: 2

8 Sep 1992

5340-12-185-0334
Butt Hinge Leaf

121850334
F01-240141-03-0: RNCC: 3 | RNVC: 2

4 Sep 1980

5340-12-329-7608
Runner

123297608
2300248-81000.02: RNCC: 2 | RNVC: 2
2300248-81000.02: RNCC: 3 | RNVC: 2
2300248-81000.02: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-12-359-0477
Angle Bracket Set

123590477
3815530440: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-174-7856
Angle Bracket

121747856
02515523: RNCC: 3 | RNVC: 2
2515523EE5088-55: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-183-7240
Loop Clamp

121837240
LN9491BK14: RNCC: 2 | RNVC: 2

15 May 1980

5340-12-370-4474
Spring Tension Clip

123704474
191611797B: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-12-349-4047
Mending Plate

123494047
564.F90.354.0: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-342-4776
Butt Hinge

123424776
6417200637: RNCC: 3 | RNVC: 2
A10.0680.00: RNCC: 5 | RNVC: 2
A10.0680.00 E: RNCC: 5 | RNVC: 2

17 Feb 1997

5340-12-374-1828
Dust And Moisture Seal Protective Cap

123741828
9016840154: RNCC: 3 | RNVC: 2
A 901 684 01 54: RNCC: 5 | RNVC: 2

28 Jan 2008

5340-12-386-1111
Frame Se Connector

123861111
2481-395410.000.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-377-3403
Retaining Strap

123773403
700325028201: RNCC: 3 | RNVC: 2
1/2G28MMN325: RNCC: 5 | RNVC: 2

12 Jan 2009

5340-12-304-9741
Support Hook

123049741
3099350183: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-12-361-0025
Mounting Plate

123610025
40530: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-324-3748
Electronic Equipment Hardware Kit

123243748
2.300.043.9: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-12-197-9129
Angle Bracket

121979129
CF 339 010 B: RNCC: 3 | RNVC: 2
CF 339 010 B: RNCC: 5 | RNVC: 2
CF 339 010: RNCC: 5 | RNVC: 9
CF 339 010 A: RNCC: 5 | RNVC: 9
CF 339 010: RNCC: 5 | RNVC: 9
CF 339 010 A: RNCC: 5 | RNVC: 9

1 Dec 1983

5340-12-701-3972
Loop Clamp

127013972
5.12.5311.2960.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-380-4708
Flush Lock

123804708
01.130.938.9: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-300-8440
Angle Bracket

123008440
4254752227: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-374-0186
Retaining Clip

123740186
955181: RNCC: 3 | RNVC: 2
955181: RNCC: 5 | RNVC: 2
955181: RNCC: 5 | RNVC: 2

10 Jan 2008

5340-12-194-3749
Retaining Strap

121943749
65.7096.200.08-A001: RNCC: 3 | RNVC: 2
253794: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-380-8379
Angle Bracket

123808379
601254-621010.02: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-342-5960
Access Cover

123425960
4303650168: RNCC: 3 | RNVC: 2
4103610168: RNCC: 5 | RNVC: 2

5 Mar 1997

5340-12-327-9063
Nonmetallic Bumper

123279063
A11A742420114: RNCC: 3 | RNVC: 2

18 Mar 1992

5340-12-328-9691
Lock-Release Lever

123289691
1907814: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-364-3977
Butt Hinge

123643977
7661411: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-12-304-7860
Mending Plate

123047860
0224 2668: RNCC: 3 | RNVC: 2
02242668EE0148-29: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-344-0622
Mending Plate

123440622
482 107: RNCC: 3 | RNVC: 2
482107: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-349-3443
Nonmetallic Solid Wheel

123493443
37 13 12 01: RNCC: 3 | RNVC: 2
37131201: RNCC: 5 | RNVC: 2

29 Oct 1999

5340-12-362-9639
Cushioning Pad

123629639
017007840: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-12-328-6740
Resilient Mount

123286740
701407140B: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-040-4364

5340-12-386-1780
Extension Drawer Slide

123861780
01.103.102.0: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-198-7075
Spring Tension Clip

121987075
V22.918.345000-0: RNCC: 3 | RNVC: 2

20 Feb 1984

5340-12-326-5657
Retaining Strap

123265657
4900059-751990.004.0: RNCC: 3 | RNVC: 2

8 Oct 1991

5340-12-184-7737
Angle Bracket

121847737
211 260 835 A: RNCC: 3 | RNVC: 2
211260835A: RNCC: 5 | RNVC: 9

16 Aug 1980

5340-12-361-4759
Dust And Moisture Seal Protective Plug

123614759
N 3774: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-343-6898
Runner

123436898
13.4.751 D: RNCC: 3 | RNVC: 2
13.4.751: RNCC: 5 | RNVC: 2
1230: RNCC: 5 | RNVC: 2
1230: RNCC: 5 | RNVC: 9

15 Jul 1997

5340-12-368-9783
Multiple Angle Bracket

123689783
7803221195AA: RNCC: 3 | RNVC: 2
1030010-721160.000.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-306-4007
Mending Plate

123064007
V22.917.34-1: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-317-8890
Turnbuckle Body

123178890
3512 712 52523: RNCC: 3 | RNVC: 2
89050400000049: RNCC: 3 | RNVC: 2
ART.NR.8907: RNCC: 5 | RNVC: 2

23 May 1989

5340-12-163-0582
Mending Plate

121630582
135M37022: RNCC: 3 | RNVC: 2
135M37022E1: RNCC: 5 | RNVC: 2
135M37022E1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-5517
Retaining Strap

123055517
54.0028.326.16: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-362-4082
Access Cover

123624082
54.0053.801.00: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-12-700-8693
Loop Clamp

127008693
VG95211-ML-127008693: RNCC: 2 | RNVC: 2
155N464-450: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-357-8103
Mounting Bracket

123578103
8854 118-141: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-12-300-8537
Dust And Moisture Seal Protective Plug

123008537
550/010: RNCC: 3 | RNVC: 2
GPN550/010: RNCC: 5 | RNVC: 2
11.02229: RNCC: 5 | RNVC: 9
550001000: RNCC: 5 | RNVC: 9
550010: RNCC: 5 | RNVC: 9
GPN550-010: RNCC: 5 | RNVC: 9

5 Sep 1984

5340-12-368-5057
Angle Bracket

123685057
J21220133-405: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-12-313-0001
Compression Cup

123130001
480000008: RNCC: 3 | RNVC: 2
50.96401-0035: RNCC: 5 | RNVC: 2
50964010035: RNCC: 5 | RNVC: 2
50964010035: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-356-2624
Mounting Bracket

123562624
2125-121413B00C: RNCC: 2 | RNVC: 2
2125-121413B00C: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-344-2142
Angle Bracket

123442142
1216 1532: RNCC: 3 | RNVC: 2
6.232.0.650.029.4: RNCC: 5 | RNVC: 9

30 Sep 1997

5340-12-379-0808
Friction Catch

123790808
3.77.0410.0: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-354-8175
Electronic Equipment Hardware Kit

123548175
R05329-801: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-123-3795
Retaining Strap

121233795
81974010113: RNCC: 3 | RNVC: 2
00004305660: RNCC: 5 | RNVC: 2
00.00430-5660: RNCC: 5 | RNVC: 2
R5660: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-1277
Access Cover

123051277
5801759-011000.000: RNCC: 2 | RNVC: 2
5801759-011000.000: RNCC: 3 | RNVC: 2
5801759-011000.000: RNCC: 5 | RNVC: 9

30 Sep 1985

5340-12-702-2188
Mounting Bracket

127022188
VG95211-ML-127022188: RNCC: 2 | RNVC: 2
30.7225.56: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-364-8692
Section Block Clamp

123648692
210/16PP: RNCC: 3 | RNVC: 2
1130005348: RNCC: 5 | RNVC: 2

10 Nov 2004

5340-12-320-9378
Double Angle Bracket

123209378
2300007-060000.002.0: RNCC: 2 | RNVC: 2
2300007-060000.002.0: RNCC: 3 | RNVC: 2
2300007-060000.002.0: RNCC: 5 | RNVC: 2
600538: RNCC: 5 | RNVC: 2
2300007-060000.001.0: RNCC: 5 | RNVC: 9

7 Mar 1990

5340-12-334-2816
Butt Hinge

123342816
100001: RNCC: 3 | RNVC: 2
2901.001.003: RNCC: 3 | RNVC: 2
2822149UD7103-03-30MM: RNCC: 5 | RNVC: 2
81.97201.2121: RNCC: 5 | RNVC: 2
81972012121: RNCC: 5 | RNVC: 2
23230-032008.005.0: RNCC: 5 | RNVC: 9

21 Apr 1994

5340-12-174-6850
Expansion Shield

121746850
FA12/50-1: RNCC: 3 | RNVC: 2
FA12-50-1: RNCC: 5 | RNVC: 2
FA12/50: RNCC: 5 | RNVC: 2
50212: RNCC: 5 | RNVC: 2
2502121: RNCC: 5 | RNVC: 9

19 Jul 1978

5340-12-701-6140
Mounting Plate

127016140
VG95211-ML-127016140: RNCC: 2 | RNVC: 2
5.12.7010.1540.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-371-4833
Angle Bracket

123714833
23302-201000.19: RNCC: 2 | RNVC: 2
23302-201000.19: RNCC: 3 | RNVC: 2
4-6012-037: RNCC: 5 | RNVC: 2
6012037: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-347-5802
Flush Bolt

123475802
88.8110.0755: RNCC: 3 | RNVC: 2
999999-01631-4-5051: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-701-8710
Angle Bracket

127018710
VG95211-ML-127018710: RNCC: 2 | RNVC: 2
7 OST1 10218-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-336-7162
Access Cover

123367162
2300348-091720.005.0: RNCC: 2 | RNVC: 2
2300348-091720.005.0: RNCC: 3 | RNVC: 2
1806946: RNCC: 5 | RNVC: 2
2300348-091720-005-0: RNCC: 5 | RNVC: 9

13 Dec 1994

5340-12-385-9769
Access Hole Frame

123859769
2500262-196410.000.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-353-2116
Mounting Bracket

123532116
2500238-042910.000.0: RNCC: 2 | RNVC: 2
2500238-042910.000.0: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-130-8946

5340-12-127-5075
Retaining Strap

121275075
3039950720: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-357-5294
Rim Lock Set

123575294
0008907467: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-376-4621
Mounting Bracket

123764621
5700.7132: RNCC: 3 | RNVC: 2
BK206434: RNCC: 5 | RNVC: 2
80061442: RNCC: 5 | RNVC: 2

1 Oct 2008

5340-12-300-9748
Loop Clamp

123009748
3609951101: RNCC: 3 | RNVC: 2

14 Sep 1984

5340-12-328-9071
Bow Handle

123289071
2V4497-A: RNCC: 3 | RNVC: 2
2V4497-A: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-392-5815
Mounting Plate

123925815
M2557426622200: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-366-0359
Mounting Bracket

123660359
9304293768: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-350-4373
Section Block Clamp

123504373
JN0413DG40: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-382-1317
Spacing Threaded Standoff

123821317
05.13.173: RNCC: 3 | RNVC: 2

12 May 2010

5340-12-305-1261
Mending Plate

123051261
409059310: RNCC: 3 | RNVC: 2
409.059 310: RNCC: 5 | RNVC: 2
5800.4049: RNCC: 5 | RNVC: 2
5800.4049E: RNCC: 5 | RNVC: 2

30 Sep 1985

5340-12-094-1047

5340-12-311-9408
Double Angle Bracket

123119408
2507-350400.001.0: RNCC: 2 | RNVC: 2
2507-350400.001.0: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-12-194-2887
Retaining Strap

121942887
1018167UND LACK.NACH RAL 6014: RNCC: 3 | RNVC: 2
B4 3030 4: RNCC: 5 | RNVC: 2
554.6060: RNCC: 5 | RNVC: 2
5546060: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-12-380-2817
Extension Drawer Slide

123802817
60005370.1: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-197-9386
Metal Runner

121979386
CF 325 711 B: RNCC: 2 | RNVC: 2
CF 325 711 B: RNCC: 3 | RNVC: 2
CF 325 711 A: RNCC: 5 | RNVC: 2
CF 325 711 B: RNCC: 5 | RNVC: 2
CF 325 711 A: RNCC: 5 | RNVC: 2

2 Dec 1983

5340-12-310-7667
Mending Plate

123107667
2.456707: RNCC: 3 | RNVC: 2
2-456707: RNCC: 5 | RNVC: 2
2-456707: RNCC: 5 | RNVC: 2

29 Jun 1987

5340-12-341-9260
Retaining Strap

123419260
AK199K: RNCC: 3 | RNVC: 2
0005460283: RNCC: 5 | RNVC: 2

16 Nov 1996

5340-12-315-3542
Sealing Plug Assembly

123153542
1463203351: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-344-0590
Double Angle Bracket

123440590
7620275: RNCC: 3 | RNVC: 2
762.0275: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-335-6194
Runner

123356194
1204-051: RNCC: 3 | RNVC: 2
F300 0T 001 3335: RNCC: 6 | RNVC: 9

6 Sep 1994

5340-12-389-7826
Mounting Plate

123897826
82062300068: RNCC: 3 | RNVC: 2
82.06230-0068: RNCC: 5 | RNVC: 2

23 Aug 2012

5340-12-371-3662
Multiple Angle Bracket

123713662
J94320249-001: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-12-146-4348
Retaining Strap

121464348
116-001-491: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-122-6258
Retaining Strap

121226258
41-4011-1003-00: RNCC: 3 | RNVC: 2
414041100300: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-162-7827
Pipe Bracket

121627827
1918-741711-009: RNCC: 2 | RNVC: 2
1918-741711-009: RNCC: 5 | RNVC: 2
1918-741711.009: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-4561
Angle Bracket

123054561
2500121-231000.04: RNCC: 2 | RNVC: 2
2500121-231000.04: RNCC: 3 | RNVC: 2
2500121-231000.04: RNCC: 5 | RNVC: 9

8 Nov 1985

5340-12-183-6357
Helical Compression Spring Seat

121836357
42009783: RNCC: 3 | RNVC: 2
42009783EE5041-04: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-304-9648
Door Button

123049648
E4-2032190: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-12-702-1869
Mounting Bracket

127021869
VG95211-ML-127021869: RNCC: 2 | RNVC: 2
30.7207.140: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-357-5721
Access Cover

123575721
3860-130000-00: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-701-6693
Blank Panel

127016693
VG95211-ML-127016693: RNCC: 2 | RNVC: 2
5.12.7211.0491.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-0796
Loop Clamp

123190796
DIN3016-1-D1-14-14X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.2X14/15: RNCC: 3 | RNVC: 2
DIN3016-D1-14-14X15-W1-2: RNCC: 3 | RNVC: 2
4730002327: RNCC: 5 | RNVC: 2
DIN3016-D1-14-14X15-W1-2: RNCC: 5 | RNVC: 9

5 Sep 1989

5340-12-335-2743
Webbing Strap

123352743
79017/026-1200-0900: RNCC: 3 | RNVC: 2
58R059-619-5: RNCC: 5 | RNVC: 2
DIN60060-2-25X900X300-C4/HAKEN: RNCC: 5 | RNVC: 9

3 Aug 1994

5340-12-161-6217
Resilient Mount

121616217
DIN95363-A15X15-M4X8-M4X12-NR70: RNCC: 2 | RNVC: 2
500014-M4X8-M4X12-NR70.ST: RNCC: 5 | RNVC: 2
5P29-50-6: RNCC: 5 | RNVC: 9
5800427-0050-006: RNCC: 5 | RNVC: 9
VG95363-A15X15-M4X8-M4X12-NR70ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-5559
Bridge Clamp

121965559
2360-261671.00.0: RNCC: 2 | RNVC: 2
2360-261671.00.0: RNCC: 3 | RNVC: 2
2360-261671.00.0: RNCC: 5 | RNVC: 2
2360-261671-00-0: RNCC: 5 | RNVC: 9

18 Jul 1983

5340-12-316-6475
Access Door

123166475
4092408: RNCC: 3 | RNVC: 2
1161971: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-322-2208
Mounting Bracket

123222208
1773668: RNCC: 3 | RNVC: 2
1773668: RNCC: 5 | RNVC: 2

2 Aug 1990

5340-12-360-4786
Mounting Plate

123604786
82010302: RNCC: 3 | RNVC: 2
82010302: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-362-7227
Dirt And Liquid Deflector

123627227
S533M6163250: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-381-1244
Butt Hinge

123811244
0008360652: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-12-385-4229
Angle Bracket

123854229
5502030743: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-123-1903

5340-12-394-1215
Mending Plate

123941215
AZ8162T570: RNCC: 3 | RNVC: 2

6 Nov 2013

5340-12-040-4735
Retaining Strap

120404735
14X2: RNCC: 3 | RNVC: 2
14X2: RNCC: 5 | RNVC: 2
14X2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-9234
Lock-Release Lever

121989234
7002183: RNCC: 3 | RNVC: 2
7002183: RNCC: 5 | RNVC: 2

13 Mar 1984

5340-12-321-9643
Mounting Bracket

123219643
4062400440: RNCC: 3 | RNVC: 2

12 Jul 1990

5340-12-352-2822
Mechanical Stop

123522822
6246201: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-12-326-4896
Mending Plate

123264896
272.346 196: RNCC: 2 | RNVC: 2
272.346.196: RNCC: 3 | RNVC: 2
272.346 196: RNCC: 5 | RNVC: 9

24 Sep 1991

5340-12-322-4002
Flush Lock

123224002
4471: RNCC: 3 | RNVC: 2
7404719: RNCC: 5 | RNVC: 2

17 Aug 1990

5340-12-191-9636
Spring Tension Clip

121919636
4960846: RNCC: 3 | RNVC: 2
496.0846: RNCC: 5 | RNVC: 2

17 Mar 1982

5340-12-318-2438
Door Button

123182438
3127250179: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-12-179-5590
Angle Bracket

121795590
2243410EE0148-48: RNCC: 3 | RNVC: 2
0224 3410: RNCC: 5 | RNVC: 2
2243410: RNCC: 5 | RNVC: 9

6 Jul 1979

5340-12-358-8931
Angle Bracket

123588931
3805462843: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-352-7369
Access Cover

123527369
13842001: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-12-350-7546
Angle Bracket

123507546
105-90022.40: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-357-9175
Seal Retaining Plate

123579175
2300042-250620.001: RNCC: 2 | RNVC: 2
2300042-250620.001: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-360-1537
Mounting Bracket

123601537
9425205223: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-194-9457
Retaining Strap

121949457
P-295514-015: RNCC: 3 | RNVC: 2
P295514-015: RNCC: 5 | RNVC: 2

21 Dec 1982

5340-12-308-0000
Ball Socket Seat

123080000
8-9444.03: RNCC: 2 | RNVC: 2
8-9444.03: RNCC: 3 | RNVC: 2
8-9444.03: RNCC: 5 | RNVC: 9

19 Aug 1986

5340-12-347-2989
Support Hook

123472989
B-301847: RNCC: 3 | RNVC: 2
301 847: RNCC: 5 | RNVC: 2

24 Nov 1998

5340-12-361-6558
Dust And Moisture Seal Protective Plug

123616558
300F031: RNCC: 3 | RNVC: 2
4337202700: RNCC: 5 | RNVC: 2
4 337 2027 00: RNCC: 5 | RNVC: 2
GPN300F031: RNCC: 5 | RNVC: 2
4 337 2027 00: RNCC: 5 | RNVC: 9

30 Oct 2003

5340-12-392-2072
Butt Hinge Leaf

123922072
DF 304 460 A: RNCC: 3 | RNVC: 2
DF 304 460 A: RNCC: 5 | RNVC: 2

15 May 2013

5340-12-179-4157
Resilient Mount

121794157
021199231C: RNCC: 3 | RNVC: 9

27 Jun 1979

5340-12-333-8672
Rod End Clevis

123338672
3524200047: RNCC: 3 | RNVC: 2
352 420 0047: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-332-6280
Friction Catch Stud

123326280
81671650063: RNCC: 2 | RNVC: 2
81671650063: RNCC: 3 | RNVC: 2
81.67165.0065: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-300-5827
Transom Chain

123005827
4359307552: RNCC: 3 | RNVC: 2

17 Aug 1984

5340-12-317-2890
Mounting Plate

123172890
4312 712 46920: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-328-3773
Angle Bracket

123283773
160-284530.90: RNCC: 3 | RNVC: 2
160-284530-90: RNCC: 5 | RNVC: 2
160-284530.90: RNCC: 5 | RNVC: 9

12 May 1992

5340-12-128-0441

5340-12-310-2959
Rod End Connector

123102959
23223-395000.04.0: RNCC: 2 | RNVC: 2
23223-395000.04.0: RNCC: 3 | RNVC: 2

6 May 1987

5340-12-358-6823
Access Cover

123586823
2800-394100.004.0: RNCC: 2 | RNVC: 2
2800-394100.004.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-392-6426
Loop Clamp

123926426
EFP15001-5: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-338-9590
Electronic Equipment Hardware Kit

123389590
8 695 720 371: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-12-701-8759
Mounting Plate

127018759
7.76.7600.1512.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-346-6275
Access Cover

123466275
7632116.0.E: RNCC: 3 | RNVC: 2

18 Aug 1998

5340-12-178-2939
Dust And Moisture Seal Protective Cap-Plug

121782939
025-0498-000: RNCC: 3 | RNVC: 2
5801506-7069-003: RNCC: 5 | RNVC: 2
2433928724: RNCC: 5 | RNVC: 2
5801506-7069-003: RNCC: 5 | RNVC: 9
24339 28724: RNCC: 5 | RNVC: 9

12 Apr 1979

5340-12-384-5262
Manual Control Lever

123845262
F1.1189-30-10-10.16-00: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-12-365-3057
Access Cover

123653057
367224-01: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-12-361-3337
Mounting Plate

123613337
51095400023: RNCC: 3 | RNVC: 2
51.09540-0023: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-198-1440
Webbing Strap

121981440
5801999-321000.00: RNCC: 2 | RNVC: 2
5801999-321000.00: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-198-3637
Metal Runner

121983637
1880128: RNCC: 3 | RNVC: 2
75D10.34-10: RNCC: 5 | RNVC: 2

19 Jan 1984

5340-12-358-5886
Double Angle Bracket

123585886
J92228078-001: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-159-2976
Retaining Clip

121592976
52-0039-501-21: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-3008
Webbing Strap

123583008
79017/026-4000-0800: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-12-328-9606
Double Angle Bracket

123289606
C42080-A26-C135: RNCC: 2 | RNVC: 2
C42080-A26-C135: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-324-6325
Webbing Strap

123246325
79057-0600-GB82517: RNCC: 3 | RNVC: 2
79057-600 GB 82517: RNCC: 3 | RNVC: 2
79057-0600-GB82517: RNCC: 5 | RNVC: 9
79057-600-GB82517: RNCC: 5 | RNVC: 9

8 Mar 1991

5340-12-358-5889
Angle Bracket

123585889
J92228102-003: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-339-3029
Resilient Mount

123393029
M25B: RNCC: 3 | RNVC: 2
M25B: RNCC: 3 | RNVC: 2
M25: RNCC: 5 | RNVC: 2
S05-05-0025: RNCC: 5 | RNVC: 2

7 Nov 1995

5340-12-316-3577
Access Cover

123163577
105-142241.02: RNCC: 3 | RNVC: 2
105-142241-02: RNCC: 5 | RNVC: 2

12 Jan 1989

5340-12-313-2194
Rod End Clevis

123132194
DIN71752-G5X10A3PMITES-BOLZENA3P: RNCC: 2 | RNVC: 2
AFKB100200058001/024: RNCC: 3 | RNVC: 2
DIN71752-G5X10A3PMITES-BOLZENA3P: RNCC: 3 | RNVC: 2
DIN71752-G5X10-FKB5X10 GELBVERZ.: RNCC: 5 | RNVC: 2
G5X10 MIT FKB5X10VERZINKT: RNCC: 5 | RNVC: 2

11 Mar 1988

5340-12-146-3886
Angle Bracket

121463886
C30324A350C42: RNCC: 3 | RNVC: 2
C30324-A350-C42: RNCC: 5 | RNVC: 2
FGSCHRK350T42: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-372-2086
Mounting Plate

123722086
J32320170-405: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-701-9004
Antipilferage Seal Locking Wire

127019004
VG95211-ML-127019004: RNCC: 2 | RNVC: 2
MM-0,3 GOST 2112-79: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4883
Mounting Bracket

127024883
VG95211-ML-127024883: RNCC: 2 | RNVC: 2
5.51.5101.0270.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7470
Angle Bracket

127017470
VG95211-ML-127017470: RNCC: 2 | RNVC: 2
5.12.7614.8770.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-027-3240
Latch Assy

120273240
H75-3-125: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-3727
Loop Clamp

127023727
VG95211-ML-127023727: RNCC: 2 | RNVC: 2
5.12.5101.0034.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-394-1068
Rigid Caster

123941068
SK961-182000.000.0: RNCC: 3 | RNVC: 2
83131138: RNCC: 6 | RNVC: 9

5 Nov 2013

5340-12-345-1353
Nut And Bolt Retainer

123451353
0860401: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-12-320-0774
Electrical-Mechanical Equipment Post

123200774
0925701: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-345-2427
Plug Button

123452427
07.0878: RNCC: 3 | RNVC: 2
CAE00502: RNCC: 5 | RNVC: 2

16 Feb 1998

5340-12-388-6290
Access Cover

123886290
5800150909: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-350-1917
Mechanical Stop

123501917
057-41: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-12-304-1244
Angle Bracket

123041244
5802161-642131.01: RNCC: 2 | RNVC: 2
5802161-642131.01: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-325-5081
Handle Grip

123255081
3515420: RNCC: 3 | RNVC: 2
3515420: RNCC: 5 | RNVC: 2
106403: RNCC: 5 | RNVC: 2
106403: RNCC: 5 | RNVC: 9
3515420: RNCC: 5 | RNVC: 9

12 Jun 1991

5340-12-321-0666
Mounting Bracket

123210666
0213 4439: RNCC: 3 | RNVC: 2
02134439KZ0150-40: RNCC: 5 | RNVC: 2

22 Mar 1990

5340-12-374-2764
Access Cover

123742764
3132228: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-12-360-0086
Mounting Bracket

123600086
9425409973: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-315-7131
Mending Plate

123157131
81155010673: RNCC: 3 | RNVC: 2
81.15501.0673: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-347-0080
Access Cover

123470080
1307 301 139: RNCC: 3 | RNVC: 2
1307301139: RNCC: 5 | RNVC: 9

12 Oct 1998

5340-12-150-7097

5340-12-175-2143
Angle Bracket

121752143
51061400022: RNCC: 3 | RNVC: 2

30 Aug 1978

5340-12-191-7366
Dust And Moisture Seal Protective Cap

121917366
A13X12,1N13018: RNCC: 3 | RNVC: 2
913018013100: RNCC: 5 | RNVC: 2

1 Mar 1982

5340-12-371-3560
Angle Bracket

123713560
2 0000-272: RNCC: 3 | RNVC: 2
2 0000-272: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-12-322-8619
Protection Bellows

123228619
1218 8285: RNCC: 3 | RNVC: 2
6.226.9.652.019.4: RNCC: 5 | RNVC: 2

28 Sep 1990

5340-12-349-8221
Handle Grip

123498221
32 72 1 458 395: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-392-2113
Mounting Plate

123922113
DW 012 960 A: RNCC: 3 | RNVC: 2
DW 012 960 A: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-338-9989
Flush Lock

123389989
6912 N: RNCC: 3 | RNVC: 2
6.101.027.50: RNCC: 5 | RNVC: 2

25 Sep 1995

5340-12-309-7095
Lock-Release Lever

123097095
2300121-983120.000.0: RNCC: 2 | RNVC: 2
2300121-983120.000.0: RNCC: 3 | RNVC: 2

18 Feb 1987

5340-12-302-6794
Mending Plate

123026794
YK03320830: RNCC: 3 | RNVC: 2
03320830: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 32 0830: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-347-0984
Nonmetallic Bumper

123470984
100N017120: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-12-366-2193
Mounting Bracket

123662193
058729: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-12-193-3983
Dust And Moisture Seal Protective Cap

121933983
01TC30659: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-353-7645
Mounting Bracket

123537645
15001838: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-320-4672
Headless Straight Rod

123204672
8-4086.00: RNCC: 2 | RNVC: 2
8-4086.00: RNCC: 3 | RNVC: 2
8-4086.00: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-12-306-4000
Mending Plate

123064000
V22.917.26-1: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-198-3558
Runner

121983558
2300109-970100.090.0: RNCC: 2 | RNVC: 2
2300109-970100.090.0: RNCC: 3 | RNVC: 2
2300109-970100.090.0: RNCC: 3 | RNVC: 2
2300109-970100.090.0: RNCC: 5 | RNVC: 9

19 Jan 1984

5340-12-386-6051
Spacing Threaded Standoff

123866051
2500262-735112.001.0: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-386-1067
Frame Se Connector

123861067
2481-395640.001.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-335-9841
Nonmetallic Bumper

123359841
B-311180B16B: RNCC: 3 | RNVC: 2

10 Oct 1994

5340-12-193-0014
Flare Lock Fastener

121930014
13681: RNCC: 3 | RNVC: 2
0049889478: RNCC: 5 | RNVC: 2
721 1 76 312 1: RNCC: 5 | RNVC: 9

11 Jun 1982

5340-12-309-5643
Metal Runner

123095643
WW 306 826 B: RNCC: 2 | RNVC: 2
WW 306 826 B: RNCC: 3 | RNVC: 9

4 Feb 1987

5340-12-382-2573
Access Cover

123822573
4100036-441000.000.4: RNCC: 2 | RNVC: 2
4100036-441000.000.4: RNCC: 3 | RNVC: 2

28 May 2010

5340-12-335-7795
Butt Hinge

123357795
2782-360600.002.0: RNCC: 2 | RNVC: 2
2782-360600.002.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-320-3825
Helical Compression Spring Seat

123203825
4900059-751530.009.0: RNCC: 3 | RNVC: 2
1227771: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-355-9913
Manual Control Lever

123559913
7132.996.2: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-702-7563
Plug Button

127027563
50-06101580085: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-318-9064
Electrical-Mechanical Equipment Post

123189064
5801352-5800.003: RNCC: 2 | RNVC: 2
VG95148C8XM4X85-ST: RNCC: 2 | RNVC: 2
VG95148C8XM4X85-ST: RNCC: 3 | RNVC: 2
5801352-5800.003: RNCC: 5 | RNVC: 2

24 Aug 1989

5340-12-188-8032
Mending Plate

121888032
5801479-3320.01: RNCC: 2 | RNVC: 2
5801479-3320.01: RNCC: 3 | RNVC: 2
5801479-3320-01: RNCC: 5 | RNVC: 2
5801479-3320-01: RNCC: 5 | RNVC: 9
5801479-3320.01: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-300-8538
Dust And Moisture Seal Protective Plug

123008538
550/012: RNCC: 3 | RNVC: 2
GPN550/012: RNCC: 5 | RNVC: 2
11.05687: RNCC: 5 | RNVC: 9
550001200: RNCC: 5 | RNVC: 9
550012: RNCC: 5 | RNVC: 9
GPN550-012: RNCC: 5 | RNVC: 9

5 Sep 1984

5340-12-310-4505
Retaining Strap

123104505
DIN1592-19BK: RNCC: 2 | RNVC: 2
DIN1592-19: RNCC: 3 | RNVC: 2
DIN1592-19BK: RNCC: 3 | RNVC: 2
DIN1592-19: RNCC: 3 | RNVC: 2
19DIN1592: RNCC: 5 | RNVC: 2
DIN1592-19: RNCC: 5 | RNVC: 2
DIN1592-19BK: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-196-1302
Rod End Clevis

121961302
21-5160-053: RNCC: 3 | RNVC: 2

1 Jun 1983

5340-12-304-7208
Double Angle Bracket

123047208
2300125-181000.004.0: RNCC: 2 | RNVC: 2
2300125-181000.004.0: RNCC: 3 | RNVC: 2
2300125-181000.004.0: RNCC: 5 | RNVC: 2
2300125-181000.004.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-702-3896
Mounting Plate

127023896
VG95211-ML-127023896: RNCC: 2 | RNVC: 2
5.12.5111.4010.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-393-5157
Dust And Moisture Seal Protective Plug

123935157
05619: RNCC: 3 | RNVC: 2

20 Sep 2013

5340-12-383-9812
Manual Control Lever

123839812
1558571: RNCC: 3 | RNVC: 2
01558571: RNCC: 5 | RNVC: 2

5 Jan 2011

5340-12-372-8760
Pad Eye

123728760
2300211-300311.000.0: RNCC: 2 | RNVC: 2
2300211-300311.000.0: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-12-344-4693
Access Cover

123444693
2500255-332100.08.0: RNCC: 2 | RNVC: 2
2500255-332100.08.0: RNCC: 3 | RNVC: 2

30 Oct 1997

5340-12-359-2489
Mounting Bracket

123592489
8-750051.000: RNCC: 2 | RNVC: 2
8-750051.000: RNCC: 3 | RNVC: 2
9943245: RNCC: 5 | RNVC: 2

15 Jan 2003

5340-12-335-4720
Electronic Equipment Hardware Kit

123354720
8 695 720 531: RNCC: 3 | RNVC: 2

22 Aug 1994

5340-12-353-9590
Strap Fastener Loop

123539590
71101: RNCC: 3 | RNVC: 2

22 May 2001

5340-12-350-4892
Angle Bracket

123504892
10063-710000.16: RNCC: 3 | RNVC: 2
10063-710000.16: RNCC: 5 | RNVC: 9

5 Apr 2000

5340-12-175-3361
Dust And Moisture Seal Protective Plug

121753361
005301115: RNCC: 3 | RNVC: 2

11 Sep 1978

5340-12-387-8340
Mounting Bracket

123878340
7093039: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-179-8088
Pad Eye

121798088
81411402248: RNCC: 3 | RNVC: 2

1 Aug 1979

5340-12-188-3877
Dust And Moisture Seal Protective Plug

121883877
600B940: RNCC: 3 | RNVC: 2
GPN600B940: RNCC: 5 | RNVC: 2
600094000: RNCC: 5 | RNVC: 9
B940: RNCC: 5 | RNVC: 9
B940GPN600: RNCC: 5 | RNVC: 9
GPN600,B940: RNCC: 5 | RNVC: 9

6 Jul 1981

5340-12-300-2342

5340-12-310-4042
Electrical-Mechanical Equipment Post

123104042
VG95148A6XM3X5-5.2201: RNCC: 2 | RNVC: 2
5.33.050: RNCC: 3 | RNVC: 2
VG95148A6XM3X5-5.2201: RNCC: 3 | RNVC: 2
VG95148A6XM3X5-PA6.6: RNCC: 5 | RNVC: 2

19 May 1987

5340-12-366-4923
Manual Control Handle

123664923
6-30-MAB-03.13: RNCC: 3 | RNVC: 2

28 Apr 2005

5340-12-384-8725
Mounting Plate

123848725
F1.1642-37-04-40.00-02: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-702-4526
Mounting Bracket

127024526
VG95211-ML-127024526: RNCC: 2 | RNVC: 2
5.51.0602.1650.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-7927
Access Cover

123217927
P-888598-001: RNCC: 3 | RNVC: 2
P888598-001: RNCC: 5 | RNVC: 2

27 Jun 1990

5340-12-339-7833
Mounting Plate

123397833
87-401.00-00.00-77: RNCC: 3 | RNVC: 2
87-401.00-00.00-77/4: RNCC: 5 | RNVC: 2

17 Jan 1996

5340-12-336-7552
Caster Frame

123367552
1000232-01-02-02-00-002: RNCC: 2 | RNVC: 2
1000232-01-02-02-00-002: RNCC: 5 | RNVC: 2

20 Dec 1994

5340-12-367-0732
Mounting Bracket

123670732
PIKVI60/60VA: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-12-179-5486
Angle Bracket

121795486
C381-A27-C49: RNCC: 2 | RNVC: 2
C381A27C49: RNCC: 3 | RNVC: 2
C381-A27-C49: RNCC: 5 | RNVC: 2
C381A27C49: RNCC: 5 | RNVC: 2
C381-A27-C49: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-315-7936
Expansion Plug

123157936
51916060068: RNCC: 3 | RNVC: 2
51.91606-0053: RNCC: 5 | RNVC: 2
51.91606-0068: RNCC: 5 | RNVC: 2
51916060053: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-314-5826
Rim Lock Set

123145826
7002074: RNCC: 3 | RNVC: 2
7002-074: RNCC: 5 | RNVC: 2

20 Jul 1988

5340-12-319-2492
Mounting Plate

123192492
22009.0.06.300.03: RNCC: 2 | RNVC: 2
22009.0.06.300.03: RNCC: 3 | RNVC: 2

15 Sep 1989

5340-12-193-3081
Nonmetallic Bumper

121933081
4618250096: RNCC: 3 | RNVC: 2
721 1 85 618 1: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-322-0088
Mending Plate

123220088
2782-363000.005.0: RNCC: 2 | RNVC: 2
2782-363000.005.0: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-333-8819
Mounting Bracket

123338819
404-2: RNCC: 3 | RNVC: 2

21 Feb 1994

5340-12-166-0104
Retaining Strap

121660104
DIN72573-2X10-ST: RNCC: 2 | RNVC: 2
DIN72573-2X10-ST: RNCC: 3 | RNVC: 2
2X10DIN72573ST: RNCC: 5 | RNVC: 2
017 6074 906322: RNCC: 5 | RNVC: 9
0176074906322: RNCC: 5 | RNVC: 9
22-75949-02: RNCC: 5 | RNVC: 9
22/75949.02: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-317-4296
Detent Plunger

123174296
0223 6578: RNCC: 3 | RNVC: 2
2236578: RNCC: 5 | RNVC: 2
89233136: RNCC: 5 | RNVC: 2
223 6578: RNCC: 5 | RNVC: 2
223-6578: RNCC: 5 | RNVC: 2
02236578: RNCC: 5 | RNVC: 9

6 Apr 1989

5340-12-161-6851
Leather Strap

121616851
308: RNCC: 3 | RNVC: 2
1405: RNCC: 3 | RNVC: 2
2524900: RNCC: 5 | RNVC: 2
3240010: RNCC: 5 | RNVC: 2
100375-019100.33: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-9256
Filler Opening Cap

123289256
DT80: RNCC: 3 | RNVC: 2
DT 80: RNCC: 5 | RNVC: 2
81.12210-0053: RNCC: 5 | RNVC: 2
81122100053: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-153-6022
Loop Clamp

121536022
42.14.001: RNCC: 3 | RNVC: 2
2211410014: RNCC: 5 | RNVC: 2
42-14-001: RNCC: 5 | RNVC: 2
42.14.001: RNCC: 5 | RNVC: 9
22114 10014: RNCC: 5 | RNVC: 9
42-14-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-2586
Webbing Strap

123342586
79017/026-0500-0250: RNCC: 3 | RNVC: 2
79017/026-500-250: RNCC: 5 | RNVC: 2
DIN60060-2-25X250X250-C4/D2: RNCC: 5 | RNVC: 9

19 Apr 1994

5340-12-357-0287
Retaining Strap

123570287
1/2D9-15MMN325: RNCC: 3 | RNVC: 2
700325015102: RNCC: 5 | RNVC: 9

25 Apr 2002

5340-12-173-6603
Loop Clamp

121736603
81286400001: RNCC: 3 | RNVC: 2
71-102-1000: RNCC: 5 | RNVC: 2
81.28640-0001: RNCC: 5 | RNVC: 2

28 Apr 1978

5340-12-702-2087
Blank Panel

127022087
VG95211-ML-127022087: RNCC: 2 | RNVC: 2
30.7211.670.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-177-7201
Webbing Strap

121777201
52-1405-410-11: RNCC: 3 | RNVC: 2

14 Feb 1979

5340-12-187-0314
Electrical-Mechanical Equipment Post

121870314
ENMET6-20: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-376-6748
Flush Lock

123766748
0962-330-700: RNCC: 3 | RNVC: 2
D0962-330-700: RNCC: 5 | RNVC: 2
142431111109: RNCC: 6 | RNVC: 9
47160: RNCC: 6 | RNVC: 9

28 Oct 2008

5340-12-363-9065
Double Angle Bracket

123639065
J29120364-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-383-2832
Handle Grip

123832832
NYX-DT-0828-10: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-12-314-6725
Dust And Moisture Seal Protective Cap

123146725
512214-3712.000: RNCC: 3 | RNVC: 2
512214-3712: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-320-7770
Casement Fastener

123207770
408-00.12.621-25: RNCC: 3 | RNVC: 2
408-00.12.621-25: RNCC: 5 | RNVC: 9

15 Feb 1990

5340-12-342-6988
Pawl Fastener

123426988
RDRS2/50: RNCC: 3 | RNVC: 2
RDRS 2-50: RNCC: 5 | RNVC: 2

18 Mar 1997

5340-12-338-8759
Dust And Moisture Seal Protective Plug

123388759
270R6030: RNCC: 3 | RNVC: 2
GPN270R6030: RNCC: 5 | RNVC: 2
270R6030: RNCC: 5 | RNVC: 2
91664566: RNCC: 5 | RNVC: 2
GPN270-R6030: RNCC: 5 | RNVC: 9
GPN270,R6030: RNCC: 5 | RNVC: 9

4 Sep 1995

5340-12-702-5470
Mounting Bracket

127025470
VG95211-ML-127025470: RNCC: 2 | RNVC: 2
5.51.7211.0420.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-3956
Mounting Bracket

123303956
P-616778-011: RNCC: 3 | RNVC: 2
P616778-011: RNCC: 5 | RNVC: 2

10 Dec 1992

5340-12-340-7742
Angle Bracket

123407742
5801984-100080.001.0: RNCC: 2 | RNVC: 2
5801984-100080.001.0: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-359-0939
Loop Clamp

123590939
DIN3016-1-D1-16X20-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Dec 2002

5340-12-701-2663
Angle Bracket

127012663
VG95211-ML-127012663: RNCC: 2 | RNVC: 2
5.12.4805.0004.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-370-7514
Loop Clamp

123707514
DIN3016-1-D1-32X20-W1-2-EPDM: RNCC: 2 | RNVC: 2
06673003236: RNCC: 5 | RNVC: 2
06.67300-3236: RNCC: 6 | RNVC: 9

15 Dec 2006

5340-12-702-5376
Angle Bracket

127025376
VG95211-ML-127025376: RNCC: 2 | RNVC: 2
5.51.7204.1253.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-8464
Loop Clamp

127018464
VG95211-ML-127018464: RNCC: 2 | RNVC: 2
5153A-8: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-9887
Double Angle Bracket

123229887
702-141100-956-0: RNCC: 3 | RNVC: 2

16 Oct 1990

5340-12-318-0151
Mounting Bracket

123180151
704-121477-000-0: RNCC: 3 | RNVC: 2

5 Jun 1989

5340-12-315-1147
Angle Bracket

123151147
R04443-101: RNCC: 3 | RNVC: 2

17 Sep 1988

5340-12-701-5469
Mounting Bracket

127015469
VG95211-ML-127015469: RNCC: 2 | RNVC: 2
5.12.6111.8013.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-2118
Mending Plate

123082118
30.3230-07.4: RNCC: 3 | RNVC: 2
30.3230-07.4: RNCC: 5 | RNVC: 9

15 Sep 1986

5340-12-702-9131
Retaining Strap

127029131
VG95211-ML-127029131: RNCC: 2 | RNVC: 2
2.11.7204.8490.00: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-171-1468
Dust And Moisture Seal Protective Cap

121711468
8977528904: RNCC: 3 | RNVC: 2
81.96410-0287: RNCC: 5 | RNVC: 2
81964100287: RNCC: 5 | RNVC: 2

12 Sep 1977

5340-12-303-0475
Mending Plate

123030475
6600117-612000.01: RNCC: 2 | RNVC: 2
6600117-612000.01: RNCC: 5 | RNVC: 9

22 Feb 1985

5340-12-166-3547
Nonmetallic Bumper

121663547
81.96210.0216: RNCC: 3 | RNVC: 2
SKK3840: RNCC: 3 | RNVC: 2
HQ8.71: RNCC: 3 | RNVC: 9
81962100216: RNCC: 5 | RNVC: 2
81.96210-0216: RNCC: 5 | RNVC: 2
SKK3840: RNCC: 5 | RNVC: 9

31 Aug 1976

5340-12-360-2807
Spring Loaded Cylinder Fastener

123602807
03090-2308: RNCC: 3 | RNVC: 2
NLM03090-2308: RNCC: 5 | RNVC: 2

5 May 2003

5340-12-352-4954
Angle Bracket

123524954
521910-190210.001.0: RNCC: 2 | RNVC: 2
521910-190210.001.0: RNCC: 3 | RNVC: 2
1519897: RNCC: 5 | RNVC: 2
22013.0.08.100.01: RNCC: 5 | RNVC: 9

22 Nov 2000

5340-12-363-6906
Spring Loaded Cylinder Fastener

123636906
GN613-10-AK: RNCC: 3 | RNVC: 2

15 Jul 2004

5340-12-345-9796
Dust And Moisture Seal Protective Plug

123459796
C41105-A85-B14: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-131-1191
Nonmetallic Bumper

121311191
82200-1047009: RNCC: 3 | RNVC: 2
39265: RNCC: 5 | RNVC: 2
8441129: RNCC: 5 | RNVC: 2
1047009: RNCC: 5 | RNVC: 2
4700003: RNCC: 5 | RNVC: 2
0039-048: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-167-3328
Rod End Connector

121673328
000969-4982-0002-0005-0B: RNCC: 3 | RNVC: 9

14 Dec 1976

5340-12-303-4317
Retaining Strap

123034317
KMR MKL 048.001-02: RNCC: 3 | RNVC: 2

22 Mar 1985

5340-12-338-0249
Mounting Bracket

123380249
G-102035: RNCC: 3 | RNVC: 2

12 May 1995

5340-12-359-4709
Manual Control Lever

123594709
3141400632: RNCC: 3 | RNVC: 2

7 Feb 2003

5340-12-311-1819
Leather Strap

123111819
81968015020: RNCC: 3 | RNVC: 2

4 Aug 1987

5340-12-127-1275
Retaining Strap

121271275
4049950232: RNCC: 3 | RNVC: 2
224041114500: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-6480
Spacing Threaded Standoff

123926480
19.228.30.060: RNCC: 3 | RNVC: 2
7422006865: RNCC: 5 | RNVC: 2
7422006865: RNCC: 5 | RNVC: 9

26 Jun 2013

5340-12-339-7649
Dust And Moisture Seal Protective Plug

123397649
140303: RNCC: 3 | RNVC: 2
140303: RNCC: 5 | RNVC: 9

15 Jan 1996

5340-12-316-0757
Access Cover

123160757
717900203: RNCC: 3 | RNVC: 2
717.9002.03: RNCC: 5 | RNVC: 2

21 Dec 1988

5340-12-364-2621
Mounting Bracket

123642621
4375280040: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-360-8584
Dust And Moisture Seal Protective Cover

123608584
NHM180X005MAL: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-12-359-5151
Dust And Moisture Seal Protective Plug

123595151
6389972586: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-12-324-0831
Angle Bracket

123240831
66.3579.314.02-A002: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-12-375-8245
Loop Clamp

123758245
29143A: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-391-4457
Access Cover

123914457
I001657TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-176-2390
Loop Clamp

121762390
PAN4231K3030: RNCC: 3 | RNVC: 2

15 Nov 1978

5340-12-325-6265
Angle Bracket

123256265
5801984-981511.006.0: RNCC: 2 | RNVC: 2
5801984-981511.006.0: RNCC: 3 | RNVC: 2
5801984-981511.006.0: RNCC: 5 | RNVC: 2

24 Jun 1991

5340-12-326-4289
Retaining Strap

123264289
K12AC: RNCC: 3 | RNVC: 2
3: RNCC: 5 | RNVC: 2

13 Sep 1991

5340-12-335-7793
Butt Hinge Leaf

123357793
2782-360000.006.0: RNCC: 2 | RNVC: 2
2782-360000.006.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-361-5706
Extension Drawer Slide

123615706
1.110.794.0: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-372-8268
Butt Hinge Leaf

123728268
A121842.01: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-12-350-5910
Manual Control Handle

123505910
160-88727: RNCC: 3 | RNVC: 2
160-88727: RNCC: 5 | RNVC: 9

18 Apr 2000

5340-12-360-7813
Mounting Bracket

123607813
0106384: RNCC: 3 | RNVC: 2
0003513: RNCC: 5 | RNVC: 9

9 Jul 2003

5340-12-330-3616
Dust And Moisture Seal Protective Plug

123303616
V40X20L,86SCHWARZ: RNCC: 3 | RNVC: 2
270R4020: RNCC: 3 | RNVC: 2
7444.0.07.00: RNCC: 3 | RNVC: 2
304024008: RNCC: 5 | RNVC: 2
0009874545: RNCC: 5 | RNVC: 2
7497: RNCC: 5 | RNVC: 2
GPN270R4020: RNCC: 5 | RNVC: 2
GPN270R4020: RNCC: 5 | RNVC: 2

5 Dec 1992

5340-12-386-5384
Mounting Plate

123865384
1.314-201000.06: RNCC: 2 | RNVC: 2
1.314-201000.06: RNCC: 5 | RNVC: 2

8 Sep 2011

5340-12-363-3282
Mounting Bracket

123633282
1837-194520.000.0: RNCC: 3 | RNVC: 2

27 May 2004

5340-12-362-3174
Mounting Plate

123623174
03.320.09.35.0: RNCC: 3 | RNVC: 2
3KK909: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-12-386-2279
Access Cover

123862279
2800-392830.010.0: RNCC: 2 | RNVC: 2
2800-392830.010.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-301-8446
Dust And Moisture Seal Protective Plug

123018446
1109870844: RNCC: 3 | RNVC: 2
7405236: RNCC: 5 | RNVC: 2
S721 1 99 026 1: RNCC: 5 | RNVC: 9
S7211990261: RNCC: 5 | RNVC: 9

13 Nov 1984

5340-12-332-9022
Pawl Fastener

123329022
2.0120.0945: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-12-315-0424
Dust And Moisture Seal Protective Cap

123150424
65011: RNCC: 3 | RNVC: 2
206957: RNCC: 5 | RNVC: 2

9 Sep 1988

5340-12-175-7961
Angle Bracket

121757961
81974850290: RNCC: 3 | RNVC: 2

18 Oct 1978

5340-12-391-9061
Spring Tension Clip

123919061
0009910198: RNCC: 3 | RNVC: 2

17 Apr 2013

5340-12-310-4039
Angle Bracket

123104039
2300227-321000.001: RNCC: 2 | RNVC: 2
2300227-321000.001: RNCC: 3 | RNVC: 2

19 May 1987

5340-12-319-7485
Bow Handle

123197485
TMT190.185.022: RNCC: 3 | RNVC: 2

31 Oct 1989

5340-12-388-8465
Dust And Moisture Seal Protective Cap

123888465
0005337131: RNCC: 3 | RNVC: 2

27 Apr 2012

5340-12-389-0239
Access Cover

123890239
X58401100008: RNCC: 3 | RNVC: 2

16 May 2012

5340-12-353-8171
Access Cover

123538171
422 188 00 02: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-332-9949
Dust And Moisture Seal Protective Cap

123329949
1120-80646: RNCC: 3 | RNVC: 2

19 Oct 1993

5340-12-370-3625
Handwheel

123703625
100097005-314: RNCC: 3 | RNVC: 2

30 Oct 2006

5340-12-191-2391
Rubber Bumper

121912391
171412303C: RNCC: 3 | RNVC: 9

19 Jan 1982

5340-12-192-7845
Electrical-Mechanical Equipment Post

121927845
0871591: RNCC: 3 | RNVC: 2
087.1591: RNCC: 5 | RNVC: 2

24 May 1982

5340-12-349-6594
Retaining Bail

123496594
2715.1320: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-170-2496
Retaining Strap

121702496
PAN4231DD3420: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-327-3264
Filler Opening Cap

123273264
1020180802: RNCC: 3 | RNVC: 2

13 Jan 1992

5340-12-177-6151
Clamping Catch

121776151
14L11-1AA: RNCC: 3 | RNVC: 2

9 Feb 1979

5340-12-194-8703

5340-12-379-2517
Mounting Bracket

123792517
0105862: RNCC: 3 | RNVC: 2

8 Jul 2009

5340-12-164-5807
Loop Clamp

121645807
689724495: RNCC: 3 | RNVC: 2
24495: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-180-3163
Expansion Shield

121803163
12332P0MFL: RNCC: 3 | RNVC: 2
71800: RNCC: 3 | RNVC: 9
N92075D2: RNCC: 5 | RNVC: 2
01245157: RNCC: 5 | RNVC: 2
1245157EE8928-63: RNCC: 5 | RNVC: 2
02-1958: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-187-4634
Double Angle Bracket

121874634
2300109-063113.001.0: RNCC: 2 | RNVC: 2
2300109-063113.001.0: RNCC: 3 | RNVC: 2
2300109-063113.001.0: RNCC: 3 | RNVC: 2
2300109-063113-001-0: RNCC: 5 | RNVC: 9
2300109-063113-001-0: RNCC: 5 | RNVC: 9
2300109-063113.001.0: RNCC: 5 | RNVC: 9
2300109-063113-001-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-182-8916
Compression Cup

121828916
H110-2-BRF-88NBR/101: RNCC: 3 | RNVC: 2
H110-2-88NBR101BRF: RNCC: 5 | RNVC: 2
H110-2-14PA101BRF: RNCC: 5 | RNVC: 2

4 Mar 1980

5340-12-328-1157
Mending Plate

123281157
5803578-139000.01: RNCC: 2 | RNVC: 2
5803578-139000.01: RNCC: 3 | RNVC: 2

8 Apr 1992

5340-12-703-3431
Retaining Strap

127033431
VG95211-ML-127033431: RNCC: 2 | RNVC: 2
N1119-484: RNCC: 3 | RNVC: 2

4 Apr 2000

Load More Results