What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 96 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 96 of 178

5340-12-322-3480
Flush Lock

123223480
4607200835: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-183-1046
Mounting Bracket

121831046
42013508: RNCC: 3 | RNVC: 2
42013508EE5059-80: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-305-5629
Angle Bracket

123055629
502505: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-309-8311
Loop Clamp

123098311
3274920040: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-310-2800
Friction Catch Stud

123102800
5030076: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-361-4323
Mounting Bracket

123614323
2894700: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-300-9416
Metal Runner

123009416
1423-910.88(3): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-337-2347
Access Cover

123372347
181004405: RNCC: 2 | RNVC: 2
181004405: RNCC: 3 | RNVC: 2
B 18 100 4405: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-346-4588
Headless Straight Rod

123464588
0001-220000-905-0: RNCC: 3 | RNVC: 2
0001-220000-905-0: RNCC: 5 | RNVC: 9

28 Jul 1998

5340-12-358-0567
Mounting Bracket

123580567
0109885578: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-12-392-4162
Pipe Hanger

123924162
I006860: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-356-0610
Mounting Bracket

123560610
6031550735: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-12-321-0237
Electrical-Mechanical Equipment Post

123210237
42064568: RNCC: 3 | RNVC: 2
42064568EE52-9055: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-12-364-5156
Flush Lock

123645156
622623: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-377-9974
Dust And Moisture Seal Protective Plug

123779974
98428459: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-315-9594
Angle Bracket

123159594
3892810140: RNCC: 3 | RNVC: 2
389 281 01 40: RNCC: 5 | RNVC: 2

9 Dec 1988

5340-12-365-6896
Spring Tension Clip

123656896
2109880578: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-12-386-7522
Block Clamp

123867522
5801391624: RNCC: 3 | RNVC: 2
CV192365A: RNCC: 5 | RNVC: 2
5801391624: RNCC: 5 | RNVC: 2

28 Sep 2011

5340-12-027-0221

5340-12-312-1295
Ball Socket Seat

123121295
0009914722: RNCC: 3 | RNVC: 2
0009914722: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-12-171-2046
Electrical-Mechanical Equipment Post

121712046
1000025-216000-11: RNCC: 3 | RNVC: 2
1000025-216000.11: RNCC: 3 | RNVC: 2
1000025-216000-11: RNCC: 5 | RNVC: 9
1000025-216000.11: RNCC: 5 | RNVC: 9

16 Sep 1977

5340-12-186-9746
Resilient Mount

121869746
155005-5,1-HD.ST-51: RNCC: 3 | RNVC: 2
5110-0-HDS: RNCC: 5 | RNVC: 2
9GP401740-00: RNCC: 5 | RNVC: 2
835.5110-0-HDS: RNCC: 5 | RNVC: 2
401740-00: RNCC: 5 | RNVC: 2
VG95406-C1-2-Q-ST: RNCC: 5 | RNVC: 9
5110-0HDS: RNCC: 5 | RNVC: 9
5110-0-HDS: RNCC: 5 | RNVC: 9

23 Feb 1981

5340-12-339-7090
Mending Plate

123397090
2500255-199900.004.0: RNCC: 2 | RNVC: 2
2500255-199900.004.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-189-5946
Electrical-Mechanical Equipment Post

121895946
VG95148C5XM3X6,8-NRST: RNCC: 2 | RNVC: 2
65.7112.450.03-A001: RNCC: 3 | RNVC: 2
VG95148C5XM3X6,8-NRST: RNCC: 3 | RNVC: 2
256599: RNCC: 5 | RNVC: 2
65-7112-450-03A001: RNCC: 5 | RNVC: 2
65.7112.450.03A001: RNCC: 5 | RNVC: 2

7 Oct 1981

5340-12-312-8606
Luggage Handle

123128606
9090/190CSW+2765MZ-FMN41: RNCC: 3 | RNVC: 2
9090(15X0,3)190C601-2765MZ(EZ34-: RNCC: 5 | RNVC: 1
9090(15X0,3)190C601-2765MZ-FMN41: RNCC: 5 | RNVC: 2
91625826: RNCC: 5 | RNVC: 2

16 Feb 1988

5340-12-357-7192
Mending Plate

123577192
DIN5295-A25ZN: RNCC: 2 | RNVC: 2

16 Jul 2002

5340-12-301-2065
Angle Bracket

123012065
A-295051-001: RNCC: 3 | RNVC: 2
A295051-001: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-150-0146
Helical Compression Spring Seat

121500146
4-36-315-4: RNCC: 3 | RNVC: 2
436315: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-9879
Angle Bracket

121969879
A-230129-163: RNCC: 3 | RNVC: 2
A230129-163: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-177-2343
Rod End Clevis

121772343
2300002-031122.000: RNCC: 2 | RNVC: 2
2300002-031122.000: RNCC: 3 | RNVC: 2
2300002-031122: RNCC: 5 | RNVC: 9

22 Jan 1979

5340-12-150-6412
Loop Clamp

121506412
DIN3016-2-G1-90X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-90X15-W1-2: RNCC: 3 | RNVC: 2
SP90/15SKZ: RNCC: 3 | RNVC: 2
1410000090: RNCC: 5 | RNVC: 2
SP90-15SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-90X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G90X15-W1: RNCC: 5 | RNVC: 9
VG95931G90X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-1842
Plug Button

123021842
207-2286-001: RNCC: 3 | RNVC: 2
4039970086: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-407-1721
Angle Bracket

5340-12-314-1241
Retaining Band

123141241
6205204641: RNCC: 3 | RNVC: 2
620 520 46 41: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-362-2400
Loop Clamp

123622400
2909990399: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-12-333-5165
Spring Tension Clip

123335165
5802017-701800.07: RNCC: 2 | RNVC: 2
5802017-701800.07: RNCC: 3 | RNVC: 2

29 Dec 1993

5340-12-369-8504
Lock Key

123698504
341065817: RNCC: 3 | RNVC: 2

21 Aug 2006

5340-12-330-1669
Access Cover

123301669
272.379 945: RNCC: 3 | RNVC: 2

11 Nov 1992

5340-12-322-8094
Plain Solid Disk

123228094
8470 032 152: RNCC: 3 | RNVC: 2
8470032152: RNCC: 5 | RNVC: 2
8470032152: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-346-4799
Access Cover

123464799
52.1950.500.03: RNCC: 3 | RNVC: 2
52.1950.500.03: RNCC: 5 | RNVC: 9

29 Jul 1998

5340-12-336-2839
Access Cover

123362839
4620 335 037: RNCC: 3 | RNVC: 2
4620335037: RNCC: 5 | RNVC: 2

7 Nov 1994

5340-12-306-1330
Flush Lock

123061330
4062600087: RNCC: 3 | RNVC: 2

30 Jan 1986

5340-12-322-3251
Nonmetallic Solid Wheel

123223251
23335-30000-3: RNCC: 3 | RNVC: 2
1036987: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-323-5381
Mounting Plate

123235381
679701330: RNCC: 3 | RNVC: 2
53.0856.10: RNCC: 5 | RNVC: 2

5 Dec 1990

5340-12-328-8755
Nonmetallic Solid Wheel

123288755
2653-330200.01: RNCC: 2 | RNVC: 2
2653-330200.01: RNCC: 3 | RNVC: 2
2653-330200.01: RNCC: 5 | RNVC: 9

27 Jun 1992

5340-12-315-1117
Nonmetallic Bumper

123151117
5550780538: RNCC: 3 | RNVC: 2
5550780538: RNCC: 5 | RNVC: 2
5550780538: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-348-1237
Rigid Caster

123481237
LFR5301NPP-VA: RNCC: 3 | RNVC: 9
0720001: RNCC: 5 | RNVC: 9

19 Apr 1999

5340-12-367-9253
Dust And Moisture Seal Protective Cap

123679253
210ZL9X20: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-346-2540
Door Holder

123462540
10.0065.210: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-12-381-5048
Mounting Bracket

123815048
4043000801: RNCC: 3 | RNVC: 2

24 Feb 2010

5340-12-387-8539
Mounting Bracket

123878539
7093669: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-321-6319
Filler Opening Cap

123216319
00154-008-000: RNCC: 3 | RNVC: 2
154-08-00: RNCC: 5 | RNVC: 9

8 Jun 1990

5340-12-333-7278
Pipe Hanger

123337278
SPGU6000.95/30B-W1: RNCC: 3 | RNVC: 2
SPGU6000.95/30B: RNCC: 5 | RNVC: 2
SPGU6000-95-30W1: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-12-193-6205
Detent Plunger

121936205
5801082-211.002: RNCC: 3 | RNVC: 2

12 Aug 1982

5340-12-350-1672
Mounting Bracket

123501672
2125-115100.10B: RNCC: 2 | RNVC: 2
2125-115100.10B: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-12-011-0509

5340-12-369-4974
Abdeckung

123694974
588.91-735100-001: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-12-365-5825
Angle Bracket

123655825
J28130105-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-306-3196
Helical Compression Spring Retainer

123063196
E4-2007610: RNCC: 3 | RNVC: 2
E4-2007610: RNCC: 5 | RNVC: 9

19 Feb 1986

5340-12-178-2298
Mending Plate

121782298
C326-A17-C9: RNCC: 2 | RNVC: 2
C326A17C9: RNCC: 3 | RNVC: 2
C326A17C9: RNCC: 5 | RNVC: 2
C326-A17-C9: RNCC: 5 | RNVC: 2
C326-A17-C9: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-340-2416
Resilient Mount

123402416
17/1691-70 SHORE: RNCC: 3 | RNVC: 2
17/1691-70: RNCC: 3 | RNVC: 2
523185: RNCC: 5 | RNVC: 2
523185: RNCC: 5 | RNVC: 2
TYP 17-1691 70 SHORE: RNCC: 5 | RNVC: 2

16 Mar 1996

5340-12-173-1662
Extension Drawer Slide Section

121731662
5801113-111111: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-12-337-1520
Lock-Release Lever

123371520
11.49043-0496: RNCC: 3 | RNVC: 2
11.49043-0496: RNCC: 5 | RNVC: 2
111.018: RNCC: 5 | RNVC: 2
11490430498: RNCC: 5 | RNVC: 2
F11.49043-0496: RNCC: 5 | RNVC: 2

25 Jan 1995

5340-12-370-5069
Gleitschienensatz

123705069
65-003-03: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-702-2167
Angle Bracket

127022167
VG95211-ML-127022167: RNCC: 2 | RNVC: 2
30.7222.620: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-317-8906
Mounting Plate

123178906
7159201: RNCC: 3 | RNVC: 2

23 May 1989

5340-12-310-2885
Angle Bracket

123102885
1081427: RNCC: 2 | RNVC: 2
1081427: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-316-4840
Access Cover

123164840
3893200684: RNCC: 3 | RNVC: 2
389 320 06 84: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-314-2032
Mending Plate

123142032
272.317 741: RNCC: 2 | RNVC: 2
272.317.741: RNCC: 3 | RNVC: 2
272.317 741: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-027-6237

5340-12-320-7982
Mounting Bracket

123207982
0224 6243: RNCC: 3 | RNVC: 2
2246243KZ150-47: RNCC: 5 | RNVC: 2

16 Feb 1990

5340-12-349-7431
Angle Bracket

123497431
T290M2001205: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-338-8442
Mounting Bracket

123388442
01483400: RNCC: 3 | RNVC: 2
01483400.0893: RNCC: 5 | RNVC: 2

30 Aug 1995

5340-12-379-3988
Dust And Moisture Seal Protective Cap

123793988
21VD130: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-367-9745
Rod End Connector

123679745
54.1094.927.00: RNCC: 3 | RNVC: 2

14 Nov 2005

5340-12-315-0312
Permanent Magnet

123150312
6850703: RNCC: 3 | RNVC: 2
6850703: RNCC: 5 | RNVC: 9

9 Sep 1988

5340-12-348-5081
Angle Bracket

123485081
0852 2010: RNCC: 3 | RNVC: 2
8522010: RNCC: 5 | RNVC: 2

6 Jul 1999

5340-12-352-7127
Access Cover

123527127
64416344: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-362-9172
Dust And Moisture Seal Protective Cap

123629172
14.14.920: RNCC: 3 | RNVC: 2

15 Apr 2004

5340-12-359-7392
Metal Grille

123597392
272.496.192: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-324-7136
Nonmetallic Bumper

123247136
54.0070.043.00: RNCC: 2 | RNVC: 2
54.0070.043.00: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-357-3342
Mounting Bracket

123573342
8812370140: RNCC: 2 | RNVC: 2
8812370140: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-12-312-6805
Mounting Bracket

123126805
1068948: RNCC: 2 | RNVC: 2
1068948: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-12-314-7458
Retaining Strap

123147458
443971848B: RNCC: 3 | RNVC: 2

5 Aug 1988

5340-12-367-8354
Mounting Plate

123678354
5550180041: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-374-9348
Dust And Moisture Seal Protective Cap-Plug

123749348
279.657 686: RNCC: 2 | RNVC: 2
279.657 686: RNCC: 3 | RNVC: 2

8 Apr 2008

5340-12-358-0565
Spring Tension Clip

123580565
0099880878: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-12-356-7507
Spring Tension Clip

123567507
D9259018020000: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-347-9505
Mounting Bracket

123479505
54.0058.147.00: RNCC: 2 | RNVC: 2
54.0058.147.00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-125-1762

5340-12-194-8604
Angle Bracket

121948604
03579300: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-12-179-5471
Angle Bracket

121795471
C280-A9-C123: RNCC: 2 | RNVC: 2
C280A9C123: RNCC: 3 | RNVC: 2
C280-A9-C123: RNCC: 5 | RNVC: 2
C280A9C123: RNCC: 5 | RNVC: 2
C280-A9-C123: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-154-8184
Turnbuckle

121548184
SP-DIN1480-M12X265-OE/OE-TZN400: RNCC: 3 | RNVC: 2
5L3853.001-02: RNCC: 5 | RNVC: 2
5L3853-001-02: RNCC: 5 | RNVC: 2
5L3853-001-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-352-4994
Mechanic Equipment Hardware Kit

123524994
2201987000: RNCC: 3 | RNVC: 2
220198-7000: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-332-7323
Handle Grip

123327323
00009198800: RNCC: 3 | RNVC: 9
KW10.300-1010: RNCC: 5 | RNVC: 9

13 Sep 1993

5340-12-321-0872
Loop Clamp

123210872
DIN3016-1-B1-27X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-27X9-W1-2: RNCC: 3 | RNVC: 2
RS0.27/9: RNCC: 3 | RNVC: 2
RS0.27/9-W1: RNCC: 5 | RNVC: 2
VG95931-B27X9-W1: RNCC: 5 | RNVC: 9
DIN3016-B1-27X9-W1-2: RNCC: 5 | RNVC: 9

26 Mar 1990

5340-12-344-3989
Mounting Bracket

123443989
P-296883-051: RNCC: 3 | RNVC: 2
P296883-051: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-701-4814
Mounting Bracket

127014814
VG95211-ML-127014814: RNCC: 2 | RNVC: 2
5.12.5811.2060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-0938
Dust And Moisture Seal Protective Plug

123190938
7200.1-1118: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-12-327-5535
Retaining Strap

123275535
1044192-1.4301: RNCC: 3 | RNVC: 2
H78550-B100-1.4301: RNCC: 5 | RNVC: 2
SN78550-B10-V2A: RNCC: 5 | RNVC: 2
H78550-B100-V2A: RNCC: 5 | RNVC: 2
WN78555/B-10-1.4301: RNCC: 5 | RNVC: 2

3 Feb 1992

5340-12-309-1821
Angle Bracket

123091821
P-245174-751: RNCC: 3 | RNVC: 2
P245174-751: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-167-0394
Resilient Mount

121670394
845-5718005.NR50.ST: RNCC: 3 | RNVC: 2
5718005/11MN50: RNCC: 3 | RNVC: 2
52-56318-4: RNCC: 5 | RNVC: 2
5718005.50: RNCC: 5 | RNVC: 2
395928114: RNCC: 5 | RNVC: 2
395928114: RNCC: 5 | RNVC: 9
395928114: RNCC: 5 | RNVC: 9
571800513: RNCC: 5 | RNVC: 9

11 Nov 1976

5340-12-701-6111
Angle Bracket

127016111
VG95211-ML-127016111: RNCC: 2 | RNVC: 2
5.12.7010.1400.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-180-6672
Dust And Moisture Seal Protective Plug

121806672
HK030CK11-111: RNCC: 3 | RNVC: 2
0287 3609: RNCC: 5 | RNVC: 2
2873609: RNCC: 5 | RNVC: 2
2873609EZ8928-63: RNCC: 5 | RNVC: 2
3ATE N14471: RNCC: 5 | RNVC: 2
41-4901-0030-0: RNCC: 5 | RNVC: 2
41.4901-0030.0: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-320-5679
Retaining Strap

123205679
LN29836B2-32: RNCC: 2 | RNVC: 2
LN29836-2-32: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-320-6497
Loop Clamp

123206497
DIN3015-LA-K-0R-12-PP-W1: RNCC: 2 | RNVC: 2
RAPR3-012: RNCC: 3 | RNVC: 2
SP112PP-DP-AS: RNCC: 3 | RNVC: 2
HRL0A12PP STMBL: RNCC: 3 | RNVC: 2
RAPR3-012: RNCC: 5 | RNVC: 2
DIN3015-LA0R-12PP-W1-K: RNCC: 5 | RNVC: 2
FV 3024287: RNCC: 5 | RNVC: 2
FVBR90-46-60-60-0014: RNCC: 5 | RNVC: 2
FV 3024287: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-323-0773
Loop Clamp

123230773
2500075-230820.000.0: RNCC: 2 | RNVC: 2
2500075-230820.000.0: RNCC: 3 | RNVC: 2

22 Oct 1990

5340-12-365-1688
Dust And Moisture Seal Protective Cap-Plug

123651688
EP280-O27: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-315-4055
Turnbuckle

123154055
BF1: RNCC: 3 | RNVC: 2
09-50: RNCC: 5 | RNVC: 2

19 Oct 1988

5340-12-393-7324
Retaining Strap

123937324
1030115-203200.00: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-362-3796
Mounting Bracket

123623796
971097608: RNCC: 3 | RNVC: 2

13 Feb 2004

5340-12-313-5538
Dust And Moisture Seal Protective Plug

123135538
IS07: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-337-9945
Mounting Bracket

123379945
7184401: RNCC: 3 | RNVC: 2
GZ71844: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-319-9757
Dust And Moisture Seal Protective Plug Set

123199757
9151840595: RNCC: 3 | RNVC: 2

24 Nov 1989

5340-12-094-5210

5340-12-183-1901
Detent Plunger

121831901
23111-1669.03: RNCC: 2 | RNVC: 2
23111-1669-03: RNCC: 3 | RNVC: 2
23111-1669.03: RNCC: 3 | RNVC: 2
23111-1669-03: RNCC: 5 | RNVC: 9
23111-1669.03: RNCC: 5 | RNVC: 9
23111-1669-03: RNCC: 5 | RNVC: 9

25 Mar 1980

5340-12-186-8402
Angle Bracket

121868402
64448034: RNCC: 3 | RNVC: 2
4448/034: RNCC: 5 | RNVC: 9
5801352-7600-01: RNCC: 5 | RNVC: 9
5801352-7600.01: RNCC: 5 | RNVC: 9
5801352-7600-01: RNCC: 5 | RNVC: 9
5801352-7600.01: RNCC: 5 | RNVC: 9
5801352-7600-01: RNCC: 5 | RNVC: 9
5801352-7600.01: RNCC: 5 | RNVC: 9

11 Feb 1981

5340-12-352-8131
Mechanical Stop

123528131
5400049-128210.01: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-12-700-8552
Loop Clamp

127008552
VG95211-ML-127008552: RNCC: 2 | RNVC: 2
155N1119-654: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-5843
Double Angle Bracket

123655843
J28230199-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-372-6088
Section Block Clamp

123726088
J49130004-001: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-12-123-3166
Leather Strap

121233166
F5565-10-01.06: RNCC: 3 | RNVC: 2
5565-10-01.06: RNCC: 3 | RNVC: 2
F5565-10-01-06: RNCC: 5 | RNVC: 2
5565-10-01-06: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-306-0363
Bow Handle

123060363
C42300-A67-B41: RNCC: 3 | RNVC: 2
35631414: RNCC: 3 | RNVC: 2
62.6750.440.00-A001: RNCC: 3 | RNVC: 2
202277: RNCC: 5 | RNVC: 2

22 Jan 1986

5340-12-305-6456
Snap Hook

123056456
2834010V: RNCC: 3 | RNVC: 2
DX-5002-40 VERNICKELT: RNCC: 3 | RNVC: 9
5002-40: RNCC: 5 | RNVC: 2
5002/40: RNCC: 5 | RNVC: 2
5002-40: RNCC: 5 | RNVC: 9
5002-40 VERNICKELT: RNCC: 5 | RNVC: 9

28 Nov 1985

5340-12-325-3987
Angle Bracket

123253987
360.112: RNCC: 3 | RNVC: 2
1002-2400-5302: RNCC: 5 | RNVC: 2
D1002-2400-5302: RNCC: 5 | RNVC: 2

3 Jun 1991

5340-12-333-1673
Retaining Strap

123331673
U100-3731-002: RNCC: 2 | RNVC: 2
U100-3731-002: RNCC: 3 | RNVC: 2

5 Nov 1993

5340-12-183-2786
Mending Plate

121832786
844-30-110000006-0B: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-184-3250
Loop Clamp

121843250
TS12: RNCC: 3 | RNVC: 2
DZ0803724: RNCC: 5 | RNVC: 2
0803724: RNCC: 5 | RNVC: 2
250870000009: RNCC: 5 | RNVC: 2
5N.3821.021.09: RNCC: 5 | RNVC: 2
5N.3821.021.09: RNCC: 5 | RNVC: 2
TS12: RNCC: 5 | RNVC: 9
5N3821-021-09: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-362-6409
Access Cover

123626409
TC-1660-03.200.241: RNCC: 3 | RNVC: 2

13 Mar 2004

5340-12-164-5621
Retaining Strap

121645621
23290-185001.001: RNCC: 2 | RNVC: 2
23290-185001.001: RNCC: 3 | RNVC: 2
23290-185001.001: RNCC: 5 | RNVC: 9
23290-185001-001: RNCC: 5 | RNVC: 9
23290-185001.001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-6055
Mounting Plate

123366055
1000232-01-00-00-00-007: RNCC: 2 | RNVC: 2
1000232-01-00-00-00-007: RNCC: 5 | RNVC: 2

30 Nov 1994

5340-12-342-0864
Angle Bracket

123420864
5802017-000120.00: RNCC: 2 | RNVC: 2
5802017-000120.00: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-12-170-0353
Friction Catch Stud

121700353
6030059: RNCC: 3 | RNVC: 2
181847441A: RNCC: 5 | RNVC: 2
44195: RNCC: 5 | RNVC: 2
030419: RNCC: 5 | RNVC: 2
0102873: RNCC: 5 | RNVC: 2
4150-560: RNCC: 5 | RNVC: 2
164-0365: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-12-338-3224
Nonmetallic Bumper

123383224
71-10973-00: RNCC: 3 | RNVC: 2
71-10973-00: RNCC: 5 | RNVC: 2
71-10973: RNCC: 5 | RNVC: 2

23 Jun 1995

5340-12-300-9005
Elastic Cord Assembly

123009005
3403/80CM: RNCC: 3 | RNVC: 2
7390: RNCC: 3 | RNVC: 2
BEG5340-12-300-9005: RNCC: 3 | RNVC: 2
3403/80: RNCC: 5 | RNVC: 2
JD5340-12-300-9005: RNCC: 5 | RNVC: 2
3403/80/LA: RNCC: 5 | RNVC: 9

11 Sep 1984

5340-12-312-2399
Cane Bolt

123122399
100000063: RNCC: 2 | RNVC: 2
100000063: RNCC: 3 | RNVC: 2

8 Dec 1987

5340-12-359-7308
Access Cover

123597308
S281M2021206: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-364-6462
Dust And Moisture Seal Protective Plug

123646462
300F141ROD: RNCC: 3 | RNVC: 2

16 Oct 2004

5340-12-360-9928
Helical Compression Spring Retainer

123609928
15075801: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-353-4908
Access Cover

123534908
4040150030: RNCC: 3 | RNVC: 2
404 015 00 30: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-356-1495
Retaining Strap

123561495
4638350498: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-357-2574
Nonmetallic Bumper

123572574
0003240908: RNCC: 3 | RNVC: 2

27 May 2002

5340-12-359-3211
Mounting Bracket

123593211
34327654660: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-388-8602
Dust And Moisture Seal Protective Plug

123888602
2315-3025: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-360-0032
Mounting Bracket

123600032
9414308658: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-158-1305
Clamping Catch

121581305
38840: RNCC: 3 | RNVC: 2
5800357-805000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-2785
Loop Clamp

121682785
LN9491B13: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-336-9588
Nonmetallic Bumper

123369588
1420026004: RNCC: 3 | RNVC: 2
F300 0T 016 6686: RNCC: 6 | RNVC: 9

29 Dec 1994

5340-12-321-4081
Access Hole Frame

123214081
140.00.02: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-094-6991

5340-12-386-5124
Manual Control Lever

123865124
T671M1021102: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-12-380-2967
Mounting Bracket

123802967
4256311714: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-12-337-9942
Multiple Angle Bracket

123379942
7147801: RNCC: 3 | RNVC: 2
EZ71478: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-365-5310
Nonmetallic Bumper

123655310
4007290: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-12-121-7169
Loop Clamp

121217169
23172630500: RNCC: 3 | RNVC: 2
23172630500000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-5936
Butt Hinge

123515936
7802494900: RNCC: 3 | RNVC: 2
78024 94900: RNCC: 5 | RNVC: 9

7 Aug 2000

5340-12-123-8774
Rubber Bumper

121238774
111837231: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-337-3639
Detent Plunger

123373639
81482250032: RNCC: 3 | RNVC: 2
81.48225.0032: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-347-2879
Swivel Caster

123472879
71594: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-12-354-8589
Mounting Bracket

123548589
0705.111-268: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-370-5651
Pad Eye

123705651
ED41-2010-00020-047: RNCC: 2 | RNVC: 2
ED41-2010-00020-047: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-12-139-6469
Rod End Clevis

121396469
2526-0154-01: RNCC: 2 | RNVC: 2
2526-0154-01: RNCC: 5 | RNVC: 2
2526-0154-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-5442
Angle Bracket

121835442
5801441-10520.003: RNCC: 2 | RNVC: 2
5801441-10520.003: RNCC: 3 | RNVC: 2
5801441-10520-003: RNCC: 5 | RNVC: 2
5801441-10520-003: RNCC: 5 | RNVC: 9
5801441-10520.003: RNCC: 5 | RNVC: 9

26 Apr 1980

5340-12-406-4335
Mounting Plate

5340-12-151-3232
Spring Tension Clip

121513232
6420-408-017-3: RNCC: 3 | RNVC: 2
6420-408-017-2: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-303-2628
Lock-Release Lever

123032628
P-886742-001: RNCC: 3 | RNVC: 2
P886742-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-363-2830
Snap Hook

123632830
100-25: RNCC: 3 | RNVC: 2

20 May 2004

5340-12-381-2962
Mounting Plate

123812962
424-04-K3: RNCC: 3 | RNVC: 2
4250473100295: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-369-7419
Sliding Block

123697419
PZ302-2002 PAINTED GREEN 383: RNCC: 3 | RNVC: 2
PZ302-2002MIL: RNCC: 5 | RNVC: 2

14 Aug 2006

5340-12-305-0186
Angle Bracket

123050186
5801759-010000.002: RNCC: 2 | RNVC: 2
5801759-010000.002: RNCC: 3 | RNVC: 2
5801759-010000.060: RNCC: 5 | RNVC: 9

17 Sep 1985

5340-12-186-7646
Bow Handle

121867646
100000105: RNCC: 2 | RNVC: 2
100000105: RNCC: 3 | RNVC: 2
5801357-1000.12: RNCC: 5 | RNVC: 2
4618990077: RNCC: 5 | RNVC: 2
5801357-1000.12: RNCC: 5 | RNVC: 2
5801357-1000.12: RNCC: 5 | RNVC: 9
5801357-1000.12: RNCC: 5 | RNVC: 9
5801357-1000-12: RNCC: 5 | RNVC: 9
10 0000 105: RNCC: 5 | RNVC: 9
5801357-1000-12: RNCC: 5 | RNVC: 9

2 Feb 1981

5340-12-353-8155
Multiple Eye Pad

123538155
16001430: RNCC: 3 | RNVC: 2

11 May 2001

5340-12-358-8901
Multiple Angle Bracket

123588901
3521800740: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-196-7639
Detent Plunger

121967639
1120-31547W2.03: RNCC: 3 | RNVC: 2

15 Aug 1983

5340-12-344-2379
Access Cover

123442379
2500255-531500.003.0: RNCC: 2 | RNVC: 2
2500255-531500.003.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-183-4878
Bow Handle

121834878
1000093-32290.00.0: RNCC: 2 | RNVC: 2
1000093-32290.00.0: RNCC: 3 | RNVC: 2
1000093-32290-00-0: RNCC: 5 | RNVC: 2
1000093-32290.00.0: RNCC: 5 | RNVC: 9
1000093-32290-00-0: RNCC: 5 | RNVC: 9

22 Apr 1980

5340-12-143-0845
Resilient Mount

121430845
25704-190502.00.0: RNCC: 2 | RNVC: 2
25704-190502.00.0: RNCC: 3 | RNVC: 2
845-25704-190502.00.0: RNCC: 3 | RNVC: 2
25704-190502-00-0: RNCC: 5 | RNVC: 2
25704-190502.00.0: RNCC: 5 | RNVC: 9
25704-190502-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-6846
Manual Control Lever

123816846
9.0224: RNCC: 3 | RNVC: 2
434659: RNCC: 5 | RNVC: 2
90224: RNCC: 5 | RNVC: 2
418-1771: RNCC: 5 | RNVC: 2

17 Mar 2010

5340-12-189-6219
Handwheel

121896219
5500-314-009-0: RNCC: 3 | RNVC: 2
5500-314-009-0-520: RNCC: 5 | RNVC: 2
90X9 WN71.4-5: RNCC: 5 | RNVC: 2
8599970310: RNCC: 5 | RNVC: 2

8 Oct 1981

5340-12-318-1630
Mounting Plate

123181630
54.0026.897.00: RNCC: 3 | RNVC: 2
54002689700: RNCC: 5 | RNVC: 2

16 Jun 1989

5340-12-326-4452
Mounting Plate

123264452
3964620224: RNCC: 3 | RNVC: 2

17 Sep 1991

5340-12-336-0534
Handle Grip

123360534
1000089-99100.01: RNCC: 2 | RNVC: 2
1000089-99100.01: RNCC: 3 | RNVC: 2

17 Oct 1994

5340-12-343-7811
Spacing Threaded Standoff

123437811
05.13.103: RNCC: 3 | RNVC: 2

28 Jul 1997

5340-12-391-5061
Access Cover

123915061
I010070TAN686A: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-12-334-2241
Angle Bracket

123342241
66.3567.509.00-A001: RNCC: 3 | RNVC: 2

14 Apr 1994

5340-12-319-7444
Clamping Catch

123197444
6100125-0260: RNCC: 2 | RNVC: 2
V17L12-1X1AA: RNCC: 3 | RNVC: 2
0745231213: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-370-8391
Door Handle

123708391
8120-0033: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-12-340-3134
Extension Drawer Slide

123403134
GM 501-1312: RNCC: 3 | RNVC: 2
558-7338: RNCC: 5 | RNVC: 2
GM5001-1312: RNCC: 5 | RNVC: 9

23 Mar 1996

5340-12-316-9618
Bow Handle

123169618
GN225-25: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-190-2164
Casement Fastener

121902164
4689694: RNCC: 3 | RNVC: 2
468.9694: RNCC: 5 | RNVC: 2
5801443-151090: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-393-8463
Mounting Bracket

123938463
11.29225-0014: RNCC: 3 | RNVC: 2
11.29225-0014: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-320-8113
Bow Handle

123208113
GN225-18: RNCC: 3 | RNVC: 2

19 Feb 1990

5340-12-309-3875
Resilient Mount

123093875
0118060/11MN60: RNCC: 3 | RNVC: 2
011806015: RNCC: 5 | RNVC: 9

21 Jan 1987

5340-12-179-3828
Angle Bracket

121793828
5800828-14771: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-12-380-6905
Rod End Clevis

123806905
V6570-07010-111: RNCC: 3 | RNVC: 2

19 Nov 2009

5340-12-184-7734
Angle Bracket

121847734
5801315-0000.022: RNCC: 2 | RNVC: 2
181260837: RNCC: 3 | RNVC: 2
5801315-0000.022: RNCC: 5 | RNVC: 2
5801315-0000.022: RNCC: 5 | RNVC: 2
5801315-0000.022: RNCC: 5 | RNVC: 9
5801315-0000.022: RNCC: 5 | RNVC: 9

16 Aug 1980

5340-12-335-3448
Catch Strike

123353448
6700018-201710.00: RNCC: 2 | RNVC: 2
6700018-201710.00: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-146-6697
Retaining Strap

121466697
REM05-227: RNCC: 3 | RNVC: 2
REM05-227: RNCC: 5 | RNVC: 2
REM05-227: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-321-1299
Lock-Release Lever

123211299
23290-181033.002: RNCC: 2 | RNVC: 2
23290-181033.002: RNCC: 3 | RNVC: 2
23290-181033.002: RNCC: 5 | RNVC: 9
9842730: RNCC: 5 | RNVC: 9

30 Mar 1990

5340-12-300-3494
Plug Button

123003494
903.101: RNCC: 3 | RNVC: 2
0008241999: RNCC: 5 | RNVC: 2
903-101: RNCC: 5 | RNVC: 2

26 Jul 1984

5340-12-380-4546
Mounting Plate

123804546
569SK0409: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-317-1629
Mounting Plate

123171629
217005-3001: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-392-8690
Handle Grip

123928690
L135M2902214: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-303-9026
Shimmy Damper

123039026
7111402: RNCC: 3 | RNVC: 2
7111401: RNCC: 5 | RNVC: 2

17 May 1985

5340-12-354-8656
Access Cover

123548656
7760 040 116: RNCC: 3 | RNVC: 2
06440P005022: RNCC: 5 | RNVC: 2
7760040116: RNCC: 5 | RNVC: 9

30 Aug 2001

5340-12-300-2718
Mending Plate

123002718
A11A243143511: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-316-2928
Bow Handle

123162928
4085704: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-183-8111
Nonmetallic Bumper

121838111
N0200251: RNCC: 3 | RNVC: 2
7404519: RNCC: 5 | RNVC: 2

23 May 1980

5340-12-333-4531
Lock-Release Lever

123334531
050541: RNCC: 3 | RNVC: 2

17 Dec 1993

5340-12-176-4536
Butt Hinge Leaf

121764536
81658010043: RNCC: 3 | RNVC: 2
81.65801-0043: RNCC: 5 | RNVC: 2
00001317155: RNCC: 5 | RNVC: 2

29 Nov 1978

5340-12-155-2580
Spring Tension Clip

121552580
160-25564-05: RNCC: 3 | RNVC: 2
160-25564-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-7472
Shelf Bracket

123067472
4900189-251000.01: RNCC: 2 | RNVC: 2
4900189-251000.01: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-12-376-4569
Dust And Moisture Seal Protective Cap

123764569
5803969-204060.00: RNCC: 2 | RNVC: 2
65.7238.141.00-A001: RNCC: 3 | RNVC: 2
AN00940571: RNCC: 5 | RNVC: 2

1 Oct 2008

5340-12-178-1469
Handle Grip

121781469
1241-3016.002: RNCC: 2 | RNVC: 2
1241-3016.002: RNCC: 3 | RNVC: 2
1241-3016.002: RNCC: 3 | RNVC: 2
1241-3016-002: RNCC: 5 | RNVC: 2
1241-3016-002: RNCC: 5 | RNVC: 9
1241-3016.002: RNCC: 5 | RNVC: 9

22 Mar 1979

5340-12-304-8527
Electrical-Mechanical Equipment Post

123048527
VG95148B8XM5X43-ST: RNCC: 2 | RNVC: 2
VG95148B8XM5X43-ST: RNCC: 3 | RNVC: 2
P769279943303000: RNCC: 3 | RNVC: 2

28 Aug 1985

5340-12-351-4217
Ball Socket Seat

123514217
506-10033: RNCC: 3 | RNVC: 2

25 Jul 2000

5340-12-191-5531
Retaining Strap

121915531
6200027-1100.01: RNCC: 2 | RNVC: 2

10 Feb 1982

5340-12-363-9788
Retaining Bail

123639788
TL4240-0064-14: RNCC: 2 | RNVC: 2
R55125: RNCC: 3 | RNVC: 2
DGY2034018: RNCC: 3 | RNVC: 2
4200-278-1194: RNCC: 5 | RNVC: 9

7 Aug 2004

5340-12-190-4346
Nonmetallic Bumper

121904346
5801435-501000.01: RNCC: 3 | RNVC: 2
5801435-501000-01: RNCC: 5 | RNVC: 2
5801435-501000.01: RNCC: 5 | RNVC: 9

26 Nov 1981

5340-12-357-5766
Rod End Connector

123575766
0009901566: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-040-1866

5340-12-389-1187
Plug Button

123891187
9999261-182200.000.0: RNCC: 3 | RNVC: 2

29 May 2012

5340-12-343-0960
Mounting Bracket

123430960
5080-211: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-350-8359
Clamping Catch

123508359
58R119-11362: RNCC: 3 | RNVC: 2

26 May 2000

5340-12-177-7191
Webbing Strap

121777191
52-1405-125-09: RNCC: 3 | RNVC: 2

14 Feb 1979

5340-12-184-8322
Spring Tension Clip

121848322
5801505-319-006: RNCC: 3 | RNVC: 2
5801505-319.006: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-161-6846
Turnbuckle Body

121616846
100332-16000.50: RNCC: 2 | RNVC: 2
100332-16000-50: RNCC: 5 | RNVC: 2
100332-16000.50: RNCC: 5 | RNVC: 2
100332-16000-50: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-170-3075
Loop Clamp

121703075
PAN4264-10: RNCC: 3 | RNVC: 2

7 Jul 1977

5340-12-305-6394
Retaining Strap

123056394
06756071: RNCC: 3 | RNVC: 9
FE756-071: RNCC: 3 | RNVC: 9

28 Nov 1985

5340-12-161-8770
Pipe Bracket

121618770
5803725-000400.00: RNCC: 2 | RNVC: 2
5801266-11700: RNCC: 5 | RNVC: 9
5801266-11700: RNCC: 5 | RNVC: 9
5801266-117000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-1738
Access Cover

123561738
ED41-1310-00031-101: RNCC: 2 | RNVC: 2
ED41-1310-00031-101: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-309-1643
Angle Bracket

123091643
KM.S01-210150.001: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-351-2246
Nonmetallic Bumper

123512246
2500113-2200.11: RNCC: 2 | RNVC: 2
2500113-2200.11: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-320-5990
Strap Hinge Leaf

123205990
100330-2500.09: RNCC: 2 | RNVC: 2
1064845: RNCC: 3 | RNVC: 2
100330-2500.09: RNCC: 5 | RNVC: 9
1064845: RNCC: 5 | RNVC: 9

30 Jan 1990

5340-12-335-3881
Runner

123353881
347-150-053A: RNCC: 2 | RNVC: 2
347-150-053A: RNCC: 3 | RNVC: 2

16 Aug 1994

5340-12-331-9804
Mounting Bracket

123319804
160-74328-04: RNCC: 3 | RNVC: 2
160-74328-04: RNCC: 5 | RNVC: 9

13 Jul 1993

5340-12-316-6757
Mounting Bracket

123166757
5800777-3290: RNCC: 2 | RNVC: 2
5800777-3290: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-314-1166
Mounting Bracket

123141166
512214-3207.000: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-12-340-1041
Resilient Mount

123401041
5718013/11MN70: RNCC: 3 | RNVC: 2
92990856010: RNCC: 5 | RNVC: 2
5718013: RNCC: 5 | RNVC: 2
5718013-11MN70: RNCC: 5 | RNVC: 2

27 Feb 1996

5340-12-359-4766
Bow Handle

123594766
864-9819-029: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-12-392-2775
Mounting Bracket

123922775
7000151: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-367-6256
Angle Bracket

123676256
2309274000: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-12-351-2386
Mounting Bracket

123512386
T672M1035206: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-12-332-6727
Plug Button

123326727
32921: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-12-374-2633
Mounting Bracket

123742633
L523M1001211: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-350-4446
Door Button

123504446
11966902: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-349-8853
Mounting Bracket

123498853
54.2551.475.00: RNCC: 2 | RNVC: 2
54.2551.475.00: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-375-0671
Angle Bracket

123750671
1166160020: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-12-327-3584
Dust And Moisture Seal Protective Cap

123273584
01002130: RNCC: 3 | RNVC: 2
7300998: RNCC: 5 | RNVC: 2
0008681230: RNCC: 5 | RNVC: 2
811 857 845: RNCC: 5 | RNVC: 2
911 803 259 00: RNCC: 5 | RNVC: 2
7022 0100 2130: RNCC: 5 | RNVC: 2
702201002130: RNCC: 5 | RNVC: 2

15 Jan 1992

5340-12-319-5281
Retaining Strap

123195281
347263: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-357-2790
Retaining Band

123572790
85974605001: RNCC: 3 | RNVC: 2
85.97460.5001: RNCC: 5 | RNVC: 2

29 May 2002

5340-12-353-7704
Mounting Plate

123537704
CBD45017P05: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-355-1429
Mounting Bracket

123551429
4614630040: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-317-4704
Counterbalance Weight

123174704
3124111194: RNCC: 3 | RNVC: 2

11 Apr 1989

5340-12-144-9604
Butt Hinge

121449604
LN9172KFF105: RNCC: 2 | RNVC: 2
LN9172FF105: RNCC: 5 | RNVC: 2
30X105LN9172: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-386-0768
Mending Plate

123860768
5530720238: RNCC: 3 | RNVC: 2

5 Aug 2011

5340-12-199-6414
Buckle

121996414
5351000000: RNCC: 3 | RNVC: 2

18 May 1984

5340-12-197-7044
Flush Lock

121977044
296L: RNCC: 3 | RNVC: 2

15 Nov 1983

5340-12-384-4215
Butt Hinge

123844215
T621P1002368: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-365-3243
Mounting Bracket

123653243
5803499-643100.00: RNCC: 2 | RNVC: 2
5803499-643100.00: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-320-7034
Angle Bracket

123207034
CF 348 063: RNCC: 2 | RNVC: 2
CF 348 063: RNCC: 3 | RNVC: 2
CF 348 063: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-357-2771
Plain Solid Disk

123572771
S-5106: RNCC: 3 | RNVC: 2

29 May 2002

5340-12-328-9253
Loop Clamp

123289253
3144910240: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-381-7854
Mounting Plate

123817854
4100037-980690.001.0: RNCC: 2 | RNVC: 2
4100037-980690.001.0: RNCC: 3 | RNVC: 2
4100037-980690.001.0: RNCC: 5 | RNVC: 9

31 Mar 2010

5340-12-372-0817
Spacing Threaded Standoff

123720817
42.004.26.413: RNCC: 3 | RNVC: 2
3094269: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-12-304-4311
Dust And Moisture Seal Protective Cap

123044311
4/0953/7009/1: RNCC: 2 | RNVC: 2
4/0953/7009/1: RNCC: 3 | RNVC: 2

17 Jul 1985

5340-12-330-3029
Spring Tension Clip

123303029
6738260214: RNCC: 3 | RNVC: 2

28 Nov 1992

5340-12-328-9649
Dust And Moisture Seal Protective Cap

123289649
2500179-360000.004.0: RNCC: 2 | RNVC: 2
2500179-360000.004.0: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-303-5779
Angle Bracket

123035779
52.0261.901.08: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-304-2658
Retaining Strap

123042658
2300005-2420.03: RNCC: 2 | RNVC: 2
9822249: RNCC: 3 | RNVC: 2
2300005-2420.03: RNCC: 5 | RNVC: 9
9822249: RNCC: 5 | RNVC: 9

4 Jul 1985

5340-12-393-4279
Extension Drawer Slide

123934279
NT-35-270: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-12-376-5482
Angle Bracket

123765482
81624102403: RNCC: 3 | RNVC: 2
81.62410-2403: RNCC: 5 | RNVC: 2

15 Oct 2008

5340-12-304-8042
Swivel Caster

123048042
155H/LK-STARU/160LR: RNCC: 3 | RNVC: 2
01TC35186: RNCC: 5 | RNVC: 2
137E/LK-STARU/160LR: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-350-1722
Loop Clamp

123501722
JN0206-50F: RNCC: 3 | RNVC: 2
JN0206-50: RNCC: 5 | RNVC: 2

23 Feb 2000

5340-12-371-7040
Door Button

123717040
0002044-030: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-373-3998
Retaining Strap

123733998
08160064: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-12-366-3202
Mounting Plate

123663202
4483558: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-12-309-2793
Kunst Gleitschiene

123092793
P-896360-029: RNCC: 3 | RNVC: 2
P896360-029: RNCC: 5 | RNVC: 2

9 Jan 1987

5340-12-321-3169
Spring Tension Clip

123213169
545-5074-A: RNCC: 3 | RNVC: 2
545-5074: RNCC: 5 | RNVC: 2

4 May 1990

5340-12-316-1348
Dust And Moisture Seal Protective Cap

123161348
HP-006-5-00000-73-0-KU: RNCC: 3 | RNVC: 2
HP006-5-00000-73-0KU: RNCC: 5 | RNVC: 2

24 Dec 1988

5340-12-301-1200
Loop Clamp

123011200
P-856295-003: RNCC: 3 | RNVC: 2
P856295-003: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-162-7582
Resilient Mount

121627582
DIN95363-A50X45-NR45ST: RNCC: 2 | RNVC: 2
1.50.45.1.45NR/ST: RNCC: 5 | RNVC: 2
1.50.45.1.45NRST: RNCC: 5 | RNVC: 2
81962100132: RNCC: 5 | RNVC: 2
811.000.050.045.10X25.NR65.ST: RNCC: 5 | RNVC: 2
81100-50X45-M10X25.NR65.ST: RNCC: 5 | RNVC: 2
81.96210-0132: RNCC: 5 | RNVC: 2
AM5-20: RNCC: 5 | RNVC: 9
VG95363-A50X45-NR45ST: RNCC: 5 | RNVC: 9
VG95363A50X45NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-5567
Butt Hinge Leaf

123225567
MEM3-1264G1: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-370-7280
Angle Bracket

123707280
453 8741-111: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-12-195-6580
Loop Clamp

121956580
DIN3016-2-G1-32X12-W5: RNCC: 2 | RNVC: 2
SP32/12SKZ-W5: RNCC: 3 | RNVC: 2
DIN3016-G1-32X12-W5: RNCC: 3 | RNVC: 2
1310700032: RNCC: 5 | RNVC: 2
SP32-12ZY1-4571: RNCC: 5 | RNVC: 2
SP32/12ZY-1.4571: RNCC: 5 | RNVC: 2
SP32/12ZY-W5: RNCC: 5 | RNVC: 2
DIN3016-G1-32X12-W5: RNCC: 5 | RNVC: 9
VG95931-G32X12-1.4571: RNCC: 5 | RNVC: 9
VG95931-G32X12-W5: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-179-2690
Snap Hook

121792690
DIN5287-A25NI: RNCC: 2 | RNVC: 2
DIN5287-A25-VERNICKELT: RNCC: 3 | RNVC: 2
4293 1/2-25 VERNICKELT: RNCC: 3 | RNVC: 9
4293 1/2-25MM-VERNICKELT: RNCC: 5 | RNVC: 2
A25DIN5287STVERNICKELT: RNCC: 5 | RNVC: 2
02254-25MMVERNI: RNCC: 5 | RNVC: 9
HKD1306: RNCC: 5 | RNVC: 9
4293 1/2-25MM-VERNICKELT: RNCC: 5 | RNVC: 9

20 Jun 1979

5340-12-317-0730
Angle Bracket

123170730
2300279-5000.56: RNCC: 2 | RNVC: 2
2300279-5000.56: RNCC: 3 | RNVC: 2
2300279-5000.56: RNCC: 5 | RNVC: 9

9 Mar 1989

5340-12-701-1747
Mounting Bracket

127011747
VG95211-ML-127011747: RNCC: 2 | RNVC: 2
5.12.0246.0070.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-4047
Loop Clamp

123084047
DIN3016-1-E2-12-17X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-12-17X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.12-17/15: RNCC: 3 | RNVC: 2
04209102012: RNCC: 5 | RNVC: 2
4209102012: RNCC: 5 | RNVC: 2
RSGU12-17-15: RNCC: 5 | RNVC: 9
DIN3016-E2-12-17X15-W1-2: RNCC: 5 | RNVC: 9

7 Oct 1986

5340-12-333-6262
Rim Lock

123336262
6000576: RNCC: 3 | RNVC: 2
600 0576: RNCC: 5 | RNVC: 2

14 Jan 1994

5340-12-309-8885
Loop Clamp

123098885
E32-823110B00F: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-12-330-4392
Nonmetallic Bumper

123304392
C22136-A1200-C51: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-12-385-2457
Locking Stay

123852457
TRIO3835-15: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-309-7937
Access Cover

123097937
6128916: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-360-8919
Double Angle Bracket

123608919
P70162400004: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-335-3512
Dust And Moisture Seal Protective Plug

123353512
11.42969: RNCC: 3 | RNVC: 2
93-6187: RNCC: 5 | RNVC: 2
93-6187: RNCC: 5 | RNVC: 2

11 Aug 1994

5340-12-377-8614
Access Cover

123778614
4000017-188416.015: RNCC: 2 | RNVC: 2
4000017-188416.015: RNCC: 3 | RNVC: 2

17 Feb 2009

5340-12-349-2665
Access Door Hinge

123492665
1039-U19: RNCC: 3 | RNVC: 2
91790758: RNCC: 5 | RNVC: 2

19 Oct 1999

5340-12-352-2739
Rod End Connector

123522739
160-88114-04: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-388-9513
Mechanical Stop

123889513
F1.1611-26-19-10.00-13: RNCC: 3 | RNVC: 2

9 May 2012

5340-12-308-7118
Electrical-Mechanical Equipment Post

123087118
VG95148A14XM4X18-AL: RNCC: 2 | RNVC: 2
5836612: RNCC: 3 | RNVC: 2
VG95148A14XM4X18-AL: RNCC: 3 | RNVC: 2

10 Nov 1986

5340-12-331-4490
Mounting Bracket

123314490
702-342210-000-0: RNCC: 2 | RNVC: 2
702-342210-000-0: RNCC: 3 | RNVC: 2

5 May 1993

5340-12-308-8926
Loop Clamp

123088926
1281-16210.13: RNCC: 2 | RNVC: 2
159440: RNCC: 3 | RNVC: 2
1281-16210.13: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-12-700-8768
Loop Clamp

127008768
VG95211-ML-127008768: RNCC: 2 | RNVC: 2
1667S-50-33: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-2090
Handle Grip

123102090
38012-0910: RNCC: 2 | RNVC: 2
38012-0910: RNCC: 3 | RNVC: 2
38012-0910: RNCC: 5 | RNVC: 9

21 Apr 1987

5340-12-350-2962
Shimmy Damper

123502962
SVC-003-03 HDS: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-12-309-5622
Access Cover

123095622
2500121-610000.10: RNCC: 2 | RNVC: 2
15.7105.392.02-A001: RNCC: 3 | RNVC: 2
15.7105.392.02: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-327-5093
Angle Bracket

123275093
6309401: RNCC: 3 | RNVC: 2
630.9401: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-12-327-6611
Filler Opening Cap

123276611
00003500520: RNCC: 3 | RNVC: 2

14 Feb 1992

5340-12-194-4908
Angle Bracket

121944908
5544096: RNCC: 3 | RNVC: 2
554.4096: RNCC: 5 | RNVC: 2

9 Nov 1982

5340-12-040-2038

5340-12-309-7932
Access Cover

123097932
5058938: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-310-0576
Expansion Plug

123100576
177D20002: RNCC: 3 | RNVC: 2

2 Apr 1987

5340-12-388-0672
Mounting Plate

123880672
5000161655: RNCC: 3 | RNVC: 2
CV135642: RNCC: 5 | RNVC: 2
0161655: RNCC: 5 | RNVC: 2
0161655: RNCC: 5 | RNVC: 9

22 Feb 2012

5340-12-331-3646
Turnbuckle

123313646
6 211 020 009: RNCC: 3 | RNVC: 2
6211 020 009: RNCC: 5 | RNVC: 2
450.200.200.009: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-12-353-5517
Mounting Plate

123535517
4900059-751098.000.0/3+4: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-12-317-4285
Strap Fastener Loop

123174285
6030030: RNCC: 3 | RNVC: 2
2647297: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-316-8275
Butt Hinge Leaf

123168275
2300279-9710.06: RNCC: 2 | RNVC: 2
2300279-9710.06: RNCC: 3 | RNVC: 2
2300279-9710.06: RNCC: 5 | RNVC: 9
9871551: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-176-8297
Retaining Band

121768297
51061405047: RNCC: 3 | RNVC: 2

20 Dec 1978

5340-12-317-5079
Resilient Mount

123175079
0115975: RNCC: 3 | RNVC: 2

13 Apr 1989

5340-12-135-3829

5340-12-331-8972
Casement Fastener

123318972
4641001: RNCC: 3 | RNVC: 2
EZ46410: RNCC: 5 | RNVC: 2

2 Jul 1993

5340-12-148-7787
Electrical-Mechanical Equipment Post

121487787
27 716-001: RNCC: 3 | RNVC: 2
27716: RNCC: 5 | RNVC: 2
27716-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-7009
Spring Tension Clip

121777009
1000086-120000.05: RNCC: 2 | RNVC: 2
1000086-120000-05: RNCC: 5 | RNVC: 2
1000086-120000-05: RNCC: 5 | RNVC: 9
1000086-120000-05: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-354-4088
Rod End Connector

123544088
804756-02: RNCC: 3 | RNVC: 2
06440P003005: RNCC: 5 | RNVC: 2

9 Jul 2001

5340-12-197-0426
Tee Hinge

121970426
4357407037: RNCC: 3 | RNVC: 2
4357407037: RNCC: 3 | RNVC: 9

13 Sep 1983

5340-12-321-5762
Mounting Bracket

123215762
718F02001: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-300-2694
Mending Plate

123002694
A11A121110441: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-194-1148
Electronic Equipment Hardware Kit

121941148
SK50: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-12-332-6728
Plug Button

123326728
21849: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-12-307-0638
Angle Bracket

123070638
P-296883-265: RNCC: 3 | RNVC: 2
P296883-265: RNCC: 5 | RNVC: 2

5 May 1986

5340-12-373-1595
Block Clamp

123731595
RBP4-533.7: RNCC: 3 | RNVC: 2
RBP4-533-7: RNCC: 5 | RNVC: 2

4 Oct 2007

5340-12-178-9428
Loop Clamp

121789428
DIN71555-60,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-60,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
60,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-60-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
60-5DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-60-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-60-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
5500200060: RNCC: 5 | RNVC: 2
93616300: RNCC: 5 | RNVC: 2

28 May 1979

5340-12-303-2437
Mending Plate

123032437
P-886683-003: RNCC: 3 | RNVC: 2
P886683-003: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-181-6831
Clamping Catch

121816831
6020079: RNCC: 3 | RNVC: 2

10 Dec 1979

5340-12-181-4234
Mounting Bracket

121814234
81252455070: RNCC: 3 | RNVC: 2
81.25245.5070: RNCC: 5 | RNVC: 2

22 Nov 1979

5340-12-388-3494
Mechanical Stop

123883494
865344340: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-12-322-8086
Plain Solid Disk

123228086
8470 032 144: RNCC: 3 | RNVC: 2
8470032144: RNCC: 5 | RNVC: 2
8470032144: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-335-5330
Helical Compression Spring Seat

123355330
6010530325: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-393-4996
Angle Bracket

123934996
4373311340: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-701-1869
Butt Hinge

127011869
VG95211-ML-127011869: RNCC: 2 | RNVC: 2
5.12.0420.1070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-2406
Bow Handle

123932406
GN528.2-PA-179-SW: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-12-700-6549
Pawl Fastener

127006549
VG95211-ML-127006549: RNCC: 2 | RNVC: 2
P 225.000: RNCC: 3 | RNVC: 2
0501410057799: RNCC: 5 | RNVC: 2
0501400059879: RNCC: 5 | RNVC: 2
P225.000: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-313-7980
Retaining Strap

123137980
1684046-100.06: RNCC: 3 | RNVC: 2

6 May 1988

5340-12-381-7640
Mounting Bracket

123817640
ZG 1013-1010410: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-12-199-7610
Angle Bracket

121997610
1120-31702W6-020.05: RNCC: 3 | RNVC: 2

29 May 1984

5340-12-173-6278
Handwheel

121736278
DIN390-B63-AL: RNCC: 2 | RNVC: 2
B63DIN390AL: RNCC: 5 | RNVC: 2

26 Apr 1978

5340-12-353-6812
Angle Bracket

123536812
PJ22510/97-015-03-07: RNCC: 3 | RNVC: 2

25 Apr 2001

5340-12-142-9910
Resilient Mount

121429910
DIN95363-F20X20-M5-NR45ST: RNCC: 2 | RNVC: 2
81180-20X20-M5.NR45.ST: RNCC: 5 | RNVC: 2
25704-350000T171: RNCC: 5 | RNVC: 2
25704-350000T171: RNCC: 5 | RNVC: 9
BE4-00-24N: RNCC: 5 | RNVC: 9
N1086-18: RNCC: 5 | RNVC: 9
VG95363-F20X20-M5-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-153-6285
Mending Plate

121536285
100355-415000.02: RNCC: 2 | RNVC: 2
100355-415000.02: RNCC: 3 | RNVC: 2
100355-415000-02: RNCC: 5 | RNVC: 2
100355-415000-02: RNCC: 5 | RNVC: 9
100355-415000-02: RNCC: 5 | RNVC: 9
100355-415000.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-2824
Pipe Bracket

123022824
6204201486: RNCC: 3 | RNVC: 2

13 Dec 1984

5340-12-198-1534
Pipe Bracket

121981534
4585038841: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-362-0722
Mounting Bracket

123620722
2653-974310.00: RNCC: 2 | RNVC: 2
2653-974310.00: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-328-5611
Mounting Bracket

123285611
52.3108.001.29: RNCC: 2 | RNVC: 2
52.3108.001.29: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-12-320-9091
Mounting Plate

123209091
0223 1152: RNCC: 3 | RNVC: 2
02231152ED0150-15: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-12-188-9336
Loop Clamp

121889336
4060940042: RNCC: 3 | RNVC: 2
406 094 00 42: RNCC: 5 | RNVC: 2
4060940042: RNCC: 5 | RNVC: 2

10 Aug 1981

5340-12-305-1140
Double Angle Bracket

123051140
4900059-982114.003.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-303-0335
Angle Bracket

123030335
1028282: RNCC: 3 | RNVC: 2
1-2518-6-4: RNCC: 5 | RNVC: 2
028282: RNCC: 5 | RNVC: 9

21 Feb 1985

5340-12-301-2410
Access Cover

123012410
4179107: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-043-7154

5340-12-179-4746
Retaining Clip

121794746
K6065: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-12-320-0299
Loop Clamp

123200299
12H4100: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-12-361-3339
Mounting Bracket

123613339
51111610041: RNCC: 3 | RNVC: 2
51.11161-0041: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-341-7773
Spring Tension Clip

123417773
4230 0600: RNCC: 3 | RNVC: 2
42300600: RNCC: 5 | RNVC: 2
42300600: RNCC: 5 | RNVC: 2
42300600EE5508-29: RNCC: 5 | RNVC: 2

25 Oct 1996

5340-12-701-8443
Loop Clamp

127018443
VG95211-ML-127018443: RNCC: 2 | RNVC: 2
5149A-34: RNCC: 3 | RNVC: 2
0500812916879: RNCC: 5 | RNVC: 2
1666S50-34N: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-300-3342

5340-12-300-8470
Nonmetallic Bumper

123008470
3634130012: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-131-5486

5340-12-183-1264
Buckle

121831264
R28329: RNCC: 3 | RNVC: 2
R28329: RNCC: 5 | RNVC: 9

20 Mar 1980

5340-12-172-8670
Friction Catch

121728670
236A: RNCC: 3 | RNVC: 2

27 Feb 1978

5340-12-315-3912
Mounting Bracket

123153912
100314-1400.02: RNCC: 2 | RNVC: 2
100314-1400.02: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-388-7938
Bow Handle

123887938
117.40.644: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-185-2336
Helical Compression Spring Seat

121852336
1393001-20320: RNCC: 2 | RNVC: 2

23 Sep 1980

5340-12-180-0502
Helical Compression Spring Seat

121800502
0287 0871: RNCC: 3 | RNVC: 2
2870871: RNCC: 5 | RNVC: 2
2870871KZ0693-60: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-027-1088

5340-12-193-1536
Expansion Plug

121931536
DIN470-30-ST-PHR: RNCC: 2 | RNVC: 2
900059030000: RNCC: 5 | RNVC: 2
B30N59ADBL8400: RNCC: 5 | RNVC: 2
30DIN470-ST-PHR: RNCC: 5 | RNVC: 2

24 Jun 1982

5340-12-159-8643
Rod End Clevis

121598643
DIN71752-G5X10LH-9SMN28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X10LH-9SMNPB28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X10LH-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X10LH-A3P: RNCC: 3 | RNVC: 2
110200050010/024: RNCC: 3 | RNVC: 2
DIN71752-G5X10LH-A3P: RNCC: 3 | RNVC: 2
63 12 2 306 464: RNCC: 5 | RNVC: 2
DIN71752-G5X10LH-A2P: RNCC: 5 | RNVC: 2
G5X10LINKSDIN71752-A2P: RNCC: 5 | RNVC: 2
G5X10LINKSDIN71752VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-4303
Mounting Bracket

127014303
VG95211-ML-127014303: RNCC: 2 | RNVC: 2
5.12.5312.8001.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-0594
Angle Bracket

127020594
VG95211-ML-127020594: RNCC: 2 | RNVC: 2
3 OST1 10218-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-310-1286
Mending Plate

123101286
A-230130-003: RNCC: 3 | RNVC: 2
A230130-003: RNCC: 5 | RNVC: 2

9 Apr 1987

5340-12-356-2769
Mounting Bracket

123562769
2500266-196910.000.0: RNCC: 3 | RNVC: 2

7 Feb 2002

5340-12-317-7138
Loop Clamp

123177138
DIN3015-S-KP-3-R-42-PA6: RNCC: 2 | RNVC: 2
HRS3KP42PA: RNCC: 3 | RNVC: 2
RCNR-342: RNCC: 3 | RNVC: 2
5042PA: RNCC: 3 | RNVC: 2
RCNR-342: RNCC: 5 | RNVC: 2
DIN3015-S-KP-3-R-42-PA: RNCC: 5 | RNVC: 2
DIN3015SKP3R-42PA: RNCC: 5 | RNVC: 2
5042PA: RNCC: 5 | RNVC: 2
VG95934KL3-42-PA: RNCC: 5 | RNVC: 9

3 May 1989

5340-12-164-5745
Catch Strike

121645745
730024-51.2: RNCC: 2 | RNVC: 2
730024-51-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-4236
Mounting Bracket

123444236
A-616743-045: RNCC: 3 | RNVC: 2
A616743-045: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-311-6587
Lock-Release Lever

123116587
3641801: RNCC: 3 | RNVC: 2

1 Oct 1987

5340-12-350-2213
Nonmetallic Bumper

123502213
10063-110100.02: RNCC: 3 | RNVC: 2
10063-110100.02: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-322-8286
Manual Control Handle

123228286
5838.04.051: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-326-2079
Angle Bracket

123262079
3963020340: RNCC: 3 | RNVC: 2
396 302 03 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-368-9821
Support Hook

123689821
7803221194AA: RNCC: 3 | RNVC: 2
1030010-721000.011.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-364-4823
Extension Drawer Slide

123644823
54.1105.205.00: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-351-7684
Staub- Und F Kappe

5340-12-351-7687
Staub- Und F Kappe

5340-12-315-6076
Nonmetallic Bumper

123156076
0700-0000-032: RNCC: 3 | RNVC: 2
0700/0000-032: RNCC: 5 | RNVC: 2
700-0000.032/34: RNCC: 5 | RNVC: 2

11 Nov 1988

5340-12-373-4669
Dust And Moisture Seal Protective Cover

123734669
T18-0004-002: RNCC: 3 | RNVC: 2

6 Nov 2007

5340-12-338-1335
Access Cover

123381335
160-75856: RNCC: 3 | RNVC: 2
15160-75856: RNCC: 5 | RNVC: 2
160-75856: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-308-8651
Mending Plate

123088651
0A846.92-01-02-00-005: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-12-345-3110
Mounting Plate

123453110
5803674-203310.00: RNCC: 2 | RNVC: 2
7804232540: RNCC: 3 | RNVC: 2
5803674-203310.00: RNCC: 5 | RNVC: 2
78042 32540: RNCC: 5 | RNVC: 9

2 Mar 1998

5340-12-181-9575
Electrical-Mechanical Equipment Post

121819575
4545733: RNCC: 3 | RNVC: 2
5801604-020000-004: RNCC: 5 | RNVC: 9
5801604-020000.004: RNCC: 5 | RNVC: 9

28 Dec 1979

5340-12-326-5522
Door Handle

123265522
2016.1100: RNCC: 3 | RNVC: 2
KS/RAT/62: RNCC: 5 | RNVC: 2

7 Oct 1991

5340-12-701-7051
Angle Bracket

127017051
VG95211-ML-127017051: RNCC: 2 | RNVC: 2
5.12.7240.2520.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-6508
Access Door Hinge

123386508
1032-U1: RNCC: 3 | RNVC: 2
0.55.0228.0: RNCC: 3 | RNVC: 2
216-9003: RNCC: 3 | RNVC: 2
0745211014: RNCC: 5 | RNVC: 2

9 Aug 1995

5340-12-701-4365
Rod End Connector

127014365
VG95211-ML-127014365: RNCC: 2 | RNVC: 2
5.12.5313.2011.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-2727
Helical Compression Spring Seat

123422727
418698 526 06 04 08: RNCC: 3 | RNVC: 2
418698526060408: RNCC: 5 | RNVC: 2
N36288-37: RNCC: 5 | RNVC: 2
N3628837: RNCC: 5 | RNVC: 2
P36288-37N: RNCC: 5 | RNVC: 2

14 Jan 1997

5340-12-320-4720
Mending Plate

123204720
33019-004-016: RNCC: 3 | RNVC: 2
33019-04-16: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-193-3109
Spring Tension Clip

121933109
4607920080: RNCC: 3 | RNVC: 2
700.1.87.522.1: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-185-7848
Metal Runner

121857848
5-043-145-9: RNCC: 3 | RNVC: 2

30 Oct 1980

5340-12-392-3146
Rod End Clevis

123923146
4100095-982139.000.0: RNCC: 2 | RNVC: 2
4100095-982139.000.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-310-8849
Webbing Strap

123108849
97-2 2+3+4: RNCC: 3 | RNVC: 2
97-2 2+3+4: RNCC: 5 | RNVC: 9

3 Jul 1987

5340-12-144-7509
Rod End Clevis

121447509
160-53021-02: RNCC: 3 | RNVC: 2
160-53021-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-8367
Spring Tension Clip

121918367
100800000012/024: RNCC: 3 | RNVC: 2
12MBO08 VERZINKT: RNCC: 3 | RNVC: 2
1008000012-023: RNCC: 3 | RNVC: 2
12MBO08 GELBVERZ.: RNCC: 5 | RNVC: 2
SL12VERZINKT: RNCC: 5 | RNVC: 2
12N12002DBL8451-11: RNCC: 5 | RNVC: 2
912002012001: RNCC: 5 | RNVC: 2
17499074: RNCC: 5 | RNVC: 2
74990: RNCC: 5 | RNVC: 2
12SXN08VERZINKT: RNCC: 5 | RNVC: 2

9 Mar 1982

5340-12-154-8472
Retaining Strap

121548472
51.2407.000-04: RNCC: 3 | RNVC: 2
51-2407-000-04: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-5454
Angle Bracket

123285454
52.3108.828.00: RNCC: 2 | RNVC: 2
52.3108.828.00: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-374-2517
Mounting Bracket

123742517
L521M3083208: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-373-7085
Loop Clamp

123737085
06152078121: RNCC: 3 | RNVC: 2
0 615 2078 121: RNCC: 5 | RNVC: 2

29 Nov 2007

5340-12-356-4985
Dust And Moisture Seal Protective Plug

123564985
735M14X1,5: RNCC: 3 | RNVC: 2
909735142: RNCC: 5 | RNVC: 2
GPN735-M14X1,5: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-184-6751
Butt Hinge Leaf

121846751
CF407970A: RNCC: 3 | RNVC: 2
CF 407 970 A: RNCC: 5 | RNVC: 2
CF407970A: RNCC: 5 | RNVC: 2
CF 407 970 A: RNCC: 5 | RNVC: 2

12 Aug 1980

5340-12-391-4660
Access Cover

123914660
I001693TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-316-6737
Mending Plate

123166737
5800777-8320.01: RNCC: 2 | RNVC: 2
5800777-8320.01: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-305-4964
Furniture Glide

123054964
0009301000: RNCC: 3 | RNVC: 2

14 Nov 1985

5340-12-391-4236
Access Cover

123914236
I006496: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-381-0564
Butt Hinge

123810564
218-9301: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-12-377-4219
Webbing Strap

123774219
T311M3043112: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-381-1842
Padlock

123811842
T70SB: RNCC: 3 | RNVC: 2

19 Jan 2010

5340-12-382-4520
Dust And Moisture Seal Protective Plug

123824520
H249491: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-12-382-4615
Multiple Angle Bracket

123824615
250386: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-12-361-9778
Mounting Plate

123619778
1030017-971000.01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-185-2283
Webbing Strap

121852283
18187158900041: RNCC: 3 | RNVC: 2

23 Sep 1980

5340-12-358-8754
Casement Fastener

123588754
226.30.717: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-302-0319
Detent Plunger

123020319
8936749: RNCC: 3 | RNVC: 2
8936749: RNCC: 5 | RNVC: 2

28 Nov 1984

5340-12-350-2867
Access Cover

123502867
VG95211-ML-123502867: RNCC: 2 | RNVC: 2
V6507-75010-042: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-190-0445
Retaining Strap

121900445
F1144086-0044: RNCC: 3 | RNVC: 2
F11.44086-0044: RNCC: 5 | RNVC: 2
F11.44086-0044: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-162-5011
Retaining Strap

121625011
100356-211000-02: RNCC: 2 | RNVC: 2
100356-211000.02: RNCC: 5 | RNVC: 2
100356-211000-02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-3118
Mounting Plate

123933118
11.31157-0001: RNCC: 3 | RNVC: 2
11.31157-0001: RNCC: 5 | RNVC: 2

6 Sep 2013

5340-12-182-6567
Dust And Moisture Seal Protective Plug

121826567
S51651-0000: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-12-371-6570
Manual Control Lever

123716570
2048370000: RNCC: 3 | RNVC: 2

3 May 2007

5340-12-325-1267
Spring Tension Clip

123251267
03779900: RNCC: 3 | RNVC: 2

6 May 1991

5340-12-022-0100

5340-12-360-2037
Mounting Bracket

123602037
300.034.201: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-355-5467
Mounting Plate

123555467
8470203121: RNCC: 3 | RNVC: 2
06440P004082: RNCC: 5 | RNVC: 2

22 Nov 2001

5340-12-185-4413
Nonmetallic Bumper

121854413
CF419354: RNCC: 3 | RNVC: 2
CF 419 354: RNCC: 5 | RNVC: 2
CF419354: RNCC: 5 | RNVC: 2
CF419354: RNCC: 5 | RNVC: 2
CF 419 354: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-352-2332
Mounting Bracket

123522332
3000.110-510: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-365-9299
Mounting Bracket

123659299
9424314140: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-315-2538
Mounting Bracket

123152538
3818100242: RNCC: 3 | RNVC: 2
381 810 02 42: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-324-3310
Filler Opening Cap

123243310
3635280010: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-12-326-4690
Bow Handle

123264690
5810010: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-12-332-1341
Spring Tension Clip

123321341
1H0868243: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-702-7569
Plug Button

127027569
50-06101190095: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-192-8672
Electronic Equipment Hardware Kit

121928672
15 178 058: RNCC: 3 | RNVC: 2
15-178-058: RNCC: 5 | RNVC: 2

1 Jun 1982

5340-12-320-1035
Mending Plate

123201035
C249-A15-C193: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-358-7819
Mounting Bracket

123587819
J92226498-403: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-309-3953
Rubber Bumper

123093953
17111460702: RNCC: 3 | RNVC: 9

21 Jan 1987

5340-12-332-2576
Plain Solid Disk

123322576
2410030022: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-320-0298
Bail Handle

123200298
CF832320AE: RNCC: 2 | RNVC: 2
CF832320AE: RNCC: 3 | RNVC: 2
CF 832 320 AE: RNCC: 5 | RNVC: 2

29 Nov 1989

5340-12-305-1143
Double Angle Bracket

123051143
4900059-982114.005.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-308-5719
Handle Grip

123085719
0061.1544.6: RNCC: 3 | RNVC: 2

24 Oct 1986

5340-12-094-5669

5340-12-311-1019
Spring Tension Clip

123111019
4312 715 02330: RNCC: 2 | RNVC: 2
4312 715 02330: RNCC: 3 | RNVC: 2
337-7194-0000: RNCC: 5 | RNVC: 2

27 Jul 1987

5340-12-390-2704
Bumper

123902704
DIN95364-A25X28-M6X30-NR55ST: RNCC: 2 | RNVC: 2

24 Oct 2012

5340-12-318-6113
Double Angle Bracket

123186113
0240 5913: RNCC: 3 | RNVC: 2
02405913: RNCC: 5 | RNVC: 2
2405913KZ0147-20: RNCC: 5 | RNVC: 2

1 Aug 1989

5340-12-196-2122
Dust And Moisture Seal Protective Plug

121962122
3347000032: RNCC: 3 | RNVC: 2
504487: RNCC: 5 | RNVC: 2
3347000032: RNCC: 5 | RNVC: 2
3 347 000 032: RNCC: 5 | RNVC: 2
1650360: RNCC: 5 | RNVC: 2
31665-3: RNCC: 5 | RNVC: 2

13 Jun 1983

5340-12-359-9114
Angle Bracket

123599114
1868-250001.003.0: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-12-361-4129
Mounting Plate

123614129
2500262-744000.003.0: RNCC: 2 | RNVC: 2
2500262-744000.003.0: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-381-7456
Mounting Bracket

123817456
8605001.5.200.00: RNCC: 3 | RNVC: 2
8605001520002: RNCC: 5 | RNVC: 2

25 Mar 2010

5340-12-359-9673
Mending Plate

123599673
2500261-820000.014.0: RNCC: 2 | RNVC: 2
2500261-820000.014.0: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-370-2490
Loop Clamp

123702490
P76795-R: RNCC: 3 | RNVC: 2

11 Oct 2006

5340-12-379-5186
Angle Bracket

123795186
102D066130.000.0: RNCC: 2 | RNVC: 2
102D066130.000.0: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-12-307-8661
Dust And Moisture Seal Protective Plug

123078661
1900508205: RNCC: 3 | RNVC: 2
1 900 508 205: RNCC: 5 | RNVC: 2

5 Aug 1986

5340-12-373-9006
Mending Plate

123739006
2500267-322500.07.0: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-12-380-2682
Angle Bracket

123802682
81517105550: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-12-391-3365
Mounting Plate

123913365
ASPD02: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-328-9264
Filler Opening Cap

123289264
1245000406: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-333-6356
Coat And Hat Hook

123336356
52.0277.605.00: RNCC: 3 | RNVC: 2

17 Jan 1994

5340-12-372-8320
Dust And Moisture Seal Protective Cover

123728320
10088277: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-12-372-8386
Section Block Clamp

123728386
5909957968: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-12-394-6364
Block Clamp

123946364
01147261: RNCC: 3 | RNVC: 2

20 Dec 2013

5340-12-361-4808
Dust And Moisture Seal Protective Plug

123614808
6739880135: RNCC: 3 | RNVC: 2
673 988 01 35: RNCC: 5 | RNVC: 9

7 Oct 2003

5340-12-345-8662
Support Hook

123458662
81779400325: RNCC: 3 | RNVC: 2
69 000 558: RNCC: 5 | RNVC: 2
81.77940-0325: RNCC: 5 | RNVC: 2

7 May 1998

5340-12-702-1873
Mounting Bracket

127021873
VG95211-ML-127021873: RNCC: 2 | RNVC: 2
30.7207.211: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-8248
Nonmetallic Bumper

127028248
52-04007300367: RNCC: 2 | RNVC: 2

22 Dec 1995

5340-12-342-2128
Access Cover

123422128
78013-51121: RNCC: 3 | RNVC: 9

7 Jan 1997

5340-12-179-0710
Access Cover

121790710
2300061-181950.001: RNCC: 2 | RNVC: 2
2300061-181950.001: RNCC: 3 | RNVC: 2
2300061-181950-001: RNCC: 5 | RNVC: 9
2300061-181950.001: RNCC: 5 | RNVC: 9

6 Jun 1979

5340-12-175-9825
Cremone Bolt

121759825
6000003: RNCC: 3 | RNVC: 2

2 Nov 1978

5340-12-300-2809
Butt Hinge Leaf

123002809
3096890652: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-182-9687
Sealing Plug Assembly

121829687
269102010600: RNCC: 3 | RNVC: 2
269102010600: RNCC: 5 | RNVC: 2

11 Mar 1980

5340-12-315-8530
Retaining Strap

123158530
1000091-0000.42: RNCC: 3 | RNVC: 2
1000091-0000.42: RNCC: 5 | RNVC: 9

2 Dec 1988

5340-12-311-7674
Clamping Catch

123117674
PROTEX-356: RNCC: 3 | RNVC: 2
7409523: RNCC: 5 | RNVC: 2

15 Oct 1987

5340-12-191-7508
Loop Clamp

121917508
2111241: RNCC: 3 | RNVC: 2
5VC4328: RNCC: 3 | RNVC: 2
F 3051/KL: RNCC: 3 | RNVC: 2
2111748: RNCC: 5 | RNVC: 2
3051/KL: RNCC: 5 | RNVC: 2

1 Mar 1982

5340-12-162-5378
Dust And Moisture Seal Protective Cap

121625378
9279938309: RNCC: 3 | RNVC: 2
8063-136: RNCC: 5 | RNVC: 2
8063136: RNCC: 5 | RNVC: 2
8430706: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-162-4653
Nonmetallic Bumper

121624653
4-00136-20010: RNCC: 3 | RNVC: 2
14021-11310: RNCC: 5 | RNVC: 2
894487: RNCC: 5 | RNVC: 2
4-00136-20010: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-2562
Mending Plate

123002562
1300062-152000.01: RNCC: 2 | RNVC: 2
7835153: RNCC: 3 | RNVC: 2
7835-153: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-360-4692
Mounting Bracket

123604692
2500261-187941.000.0: RNCC: 2 | RNVC: 2
2500261-187941.000.0: RNCC: 3 | RNVC: 2

23 May 2003

5340-12-313-4610
Lock-Release Lever

123134610
2300013-5650.00: RNCC: 2 | RNVC: 2
2300013-5650.00: RNCC: 3 | RNVC: 2
2300013-5650.00: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-371-8719
Double Angle Bracket

123718719
7103846: RNCC: 3 | RNVC: 2

24 May 2007

5340-12-328-9312
Protection Bellows

123289312
366 356: RNCC: 3 | RNVC: 2
366356: RNCC: 5 | RNVC: 2
22992001: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-348-6652
Nonmetallic Bumper

123486652
300667: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-322-3285
Nonmetallic Bumper

123223285
9000 9233: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-12-348-6603
Handwheel

123486603
306115: RNCC: 3 | RNVC: 2

30 Jul 1999

5340-12-355-0891
Angle Bracket

123550891
T551M1004201: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-12-157-3418
Angle Bracket

121573418
4037644: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-359-6462
Nonmetallic Bumper

123596462
4040CR: RNCC: 3 | RNVC: 2
SN5002271: RNCC: 5 | RNVC: 2

25 Feb 2003

Load More Results