What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 95 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 95 of 178

5340-12-319-8999
Mounting Plate

123198999
38C660: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-12-314-0428
Double Angle Bracket

123140428
6154290540: RNCC: 3 | RNVC: 2
615 429 05 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-305-3782
Dust And Moisture Seal Protective Cap

123053782
2819812136: RNCC: 3 | RNVC: 2
2819812136: RNCC: 5 | RNVC: 2

29 Oct 1985

5340-12-183-5662
Pad Eye

121835662
027571301: RNCC: 3 | RNVC: 2

29 Apr 1980

5340-12-314-4099
Access Cover

123144099
00448474: RNCC: 3 | RNVC: 2
00448474: RNCC: 5 | RNVC: 2

2 Jul 1988

5340-12-316-5846
Access Cover

123165846
510252-3346.000: RNCC: 3 | RNVC: 2
510252-3346: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-701-4559
Loop Clamp

127014559
VG95211-ML-127014559: RNCC: 2 | RNVC: 2
5.12.5314.1007.99: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-3941
Clamping Catch

121923941
6.060.028.00: RNCC: 3 | RNVC: 2
42316897: RNCC: 5 | RNVC: 2
42316897KZ5611-04: RNCC: 5 | RNVC: 2

20 Apr 1982

5340-12-312-7902
Mounting Bracket

123127902
5801984-200710.009.0: RNCC: 2 | RNVC: 2
5801984-200710.009.0: RNCC: 3 | RNVC: 2

5 Feb 1988

5340-12-341-0863
Bow Handle

123410863
B10/50: RNCC: 3 | RNVC: 2
025026: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-12-315-5989
Retaining Strap

123155989
DIN3016-1-F1-35X20-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-35X20-W5: RNCC: 3 | RNVC: 2
RSGU2.35/20-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-35X20-W5: RNCC: 5 | RNVC: 9
VG95931F35X20W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-304-4920
Lock-Release Lever

123044920
NO PRIMARY REF 12-304-4920: RNCC: 3 | RNVC: 2
5790 171964: RNCC: 5 | RNVC: 9

24 Jul 1985

5340-12-370-2301
Retaining Strap

123702301
21397-T03: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-12-317-1160
Door Handle

123171160
00365 0000 DA 1-50: RNCC: 3 | RNVC: 2

10 Mar 1989

5340-12-188-4873
Loop Clamp

121884873
H15P: RNCC: 3 | RNVC: 2
22025-017: RNCC: 3 | RNVC: 2
5800583-096190-075: RNCC: 5 | RNVC: 2
5800583-096190.075: RNCC: 5 | RNVC: 2
5N.3821.022.05: RNCC: 5 | RNVC: 2
5N.3821.022.05: RNCC: 5 | RNVC: 2
211-60159: RNCC: 5 | RNVC: 2
273.757 682: RNCC: 5 | RNVC: 2
H15P: RNCC: 5 | RNVC: 2
203015102: RNCC: 5 | RNVC: 9

13 Jul 1981

5340-12-317-3695
Mounting Bracket

123173695
31004-001-016: RNCC: 3 | RNVC: 2
31004-01-16: RNCC: 5 | RNVC: 9

3 Apr 1989

5340-12-180-2148
Angle Bracket

121802148
02521754: RNCC: 3 | RNVC: 2
2521754EE5038-42: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-180-3115
Double Angle Bracket

121803115
42035520: RNCC: 3 | RNVC: 2
42035520EE5035-71: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-348-0391
Detent Plunger

123480391
3978621: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-384-7566
Mounting Bracket

123847566
WTG750490: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-12-164-5516
Angle Bracket

121645516
143072603: RNCC: 3 | RNVC: 2
D143072603: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-1804
Angle Bracket

123221804
00105-210-000: RNCC: 3 | RNVC: 2
105-210-00: RNCC: 5 | RNVC: 9

30 Jul 1990

5340-12-198-4316
Lock-Release Lever

121984316
2500138-040200.00: RNCC: 2 | RNVC: 2
2500138-040200.00: RNCC: 3 | RNVC: 2
2500138-040200.00: RNCC: 5 | RNVC: 9
2500138-040200.00: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-12-344-2378
Access Cover

123442378
2500255-531500.002.0: RNCC: 2 | RNVC: 2
2500255-531500.002.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-300-9414
Hasp Staple

123009414
1423-910.91(3): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-371-4432
Dust And Moisture Seal Protective Cap

123714432
SKS ZUBS 3 FS: RNCC: 3 | RNVC: 2
006403151: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-12-322-8366
Access Cover

123228366
1174301: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-388-7559
Clamping Catch

123887559
101.102745: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-180-4701
Mounting Bracket

121804701
3817500014: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-025-0582

5340-12-168-5221
Retaining Strap

121685221
WW406939: RNCC: 3 | RNVC: 2
WW406939: RNCC: 5 | RNVC: 2
WW 406 939: RNCC: 5 | RNVC: 2
WW406939: RNCC: 5 | RNVC: 2

18 Mar 1977

5340-12-135-9855

5340-12-135-6738

5340-12-363-5760
Bail Handle

123635760
5114.02: RNCC: 3 | RNVC: 2

6 Jul 2004

5340-12-360-3730
Dust And Moisture Seal Protective Cap

123603730
0009626507: RNCC: 3 | RNVC: 2
0009626507: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-304-1249
Electrical-Mechanical Equipment Post

123041249
5802161-642100.04: RNCC: 2 | RNVC: 2
5802161-642100.04: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-372-6302
Retaining Strap

123726302
160.15.0195: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-12-145-5582
Resilient Mount

121455582
23114-0827.03: RNCC: 2 | RNVC: 2
64070028: RNCC: 3 | RNVC: 2
FM2.61/240-5: RNCC: 3 | RNVC: 9
23114-0827-03: RNCC: 5 | RNVC: 2
23114-0827.03: RNCC: 5 | RNVC: 2
23114-0827-03: RNCC: 5 | RNVC: 9
23114-0827-03: RNCC: 5 | RNVC: 9
FM2-61-240-5: RNCC: 5 | RNVC: 9
23114-0827-03: RNCC: 5 | RNVC: 9
1020-1-240: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-3917
Loop Clamp

123903917
DIN3016-1-E2-27-27X15-W1-2-NBR: RNCC: 2 | RNVC: 2

7 Nov 2012

5340-12-171-6362
Escutcheon Plate

121716362
81626420024: RNCC: 3 | RNVC: 2
23230-172447.004.0: RNCC: 5 | RNVC: 2
1203675: RNCC: 5 | RNVC: 2
81.62642-0024: RNCC: 5 | RNVC: 2
81-62642-0024: RNCC: 5 | RNVC: 2
23230-172447-004-0: RNCC: 5 | RNVC: 9
23230-172447.004.0: RNCC: 5 | RNVC: 9

28 Oct 1977

5340-12-312-7597
Loop Clamp

123127597
DIN3015-LC-K-0R-10-PP-W1: RNCC: 2 | RNVC: 2
RAPR1-010: RNCC: 3 | RNVC: 2
HRL0C10PP STMBL: RNCC: 3 | RNVC: 2
SP110PP-LI: RNCC: 3 | RNVC: 2
DIN3015-LC0R-10PP-W1-K: RNCC: 5 | RNVC: 2
GRI010SP110: RNCC: 5 | RNVC: 2
SP110PPLI: RNCC: 5 | RNVC: 2
1019136: RNCC: 5 | RNVC: 2
RAPR1-010: RNCC: 5 | RNVC: 2
SP110PP-LI: RNCC: 5 | RNVC: 2

3 Feb 1988

5340-12-197-7674
Angle Bracket

121977674
A-145401-029: RNCC: 3 | RNVC: 2
A145401-029: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-356-6405
Dust And Moisture Seal Boot

123566405
N/S10-6/405/7: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-304-7211
Double Angle Bracket

123047211
2300126-181400.006.0: RNCC: 2 | RNVC: 2
2300126-181400.006.0: RNCC: 3 | RNVC: 2
2300126-181400.006.0: RNCC: 5 | RNVC: 2
2300126-181400.006.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-341-8809
Dust And Moisture Seal Protective Cap

123418809
250/48,3: RNCC: 3 | RNVC: 2
GPN250/48,3: RNCC: 5 | RNVC: 2

12 Nov 1996

5340-12-169-7984
Nonmetallic Bumper

121697984
1400003-12047-02: RNCC: 3 | RNVC: 2
1400003-12047-02: RNCC: 5 | RNVC: 9
1400003-12047.02: RNCC: 5 | RNVC: 9

10 Jun 1977

5340-12-338-8855
Mounting Plate

123388855
5802017-713400.01: RNCC: 2 | RNVC: 2
5802017-713400.01: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-361-7599
Angle Bracket

123617599
T290M2075102: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-384-8033
Angle Bracket

123848033
70623: RNCC: 3 | RNVC: 2

30 Mar 2011

5340-12-183-7750
Mounting Plate

121837750
181885679: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-365-8327
Dust And Moisture Seal Protective Cover

123658327
9704620057: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-12-305-5683
Angle Bracket

123055683
4068325013: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-371-2643
Loop Clamp

123712643
EN4114F19WR1: RNCC: 2 | RNVC: 2

7 Mar 2007

5340-12-365-2522
Butt Hinge Leaf

123652522
2500278-191740.001.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-359-9224
Mounting Plate

123599224
2500179-00100.002.0: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-166-6383
Helical Compression Spring Seat

121666383
1-60-7-22-10-06-05: RNCC: 3 | RNVC: 2
1-2210-6: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-332-4363
Mounting Bracket

123324363
5-450-910: RNCC: 3 | RNVC: 2
450 910: RNCC: 5 | RNVC: 9
5-450 910: RNCC: 5 | RNVC: 9
5-450910: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-700-9379
Loop Clamp

127009379
VG95211-ML-127009379: RNCC: 2 | RNVC: 2
2272A-8-2: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-1043
Loop Clamp

121641043
DIN3016-G1-111X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-111X12-W1-2: RNCC: 3 | RNVC: 2
SP111/12SKZ: RNCC: 3 | RNVC: 2
1310005111: RNCC: 5 | RNVC: 2
SP111-12SKZ: RNCC: 5 | RNVC: 2
VG95931-G111X12-W1: RNCC: 5 | RNVC: 9
VG95931G111X12W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-2746
Headless Straight Rod

123032746
P-886688-001: RNCC: 3 | RNVC: 2
P886688-001: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-188-0423
Loop Clamp

121880423
DIN3016-2-G1-22X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-22X12-W1-2: RNCC: 3 | RNVC: 2
SP22/12SKZ: RNCC: 3 | RNVC: 2
SP22/12ZY: RNCC: 5 | RNVC: 2
1310005022: RNCC: 5 | RNVC: 2
SP22-12ZY: RNCC: 5 | RNVC: 2
DIN3016-G1-22X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-G22X12-W1: RNCC: 5 | RNVC: 9
VG95931G22X12-W1: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-194-4709
Rod End Clevis

121944709
A-446844-401: RNCC: 3 | RNVC: 2
A446844-401: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-313-1586
Double Angle Bracket

123131586
100330-3730.00: RNCC: 2 | RNVC: 2
9845305: RNCC: 3 | RNVC: 2
9845305: RNCC: 5 | RNVC: 9
100330-3730.00: RNCC: 5 | RNVC: 9

8 Mar 1988

5340-12-390-9503
Access Cover

123909503
7050862: RNCC: 3 | RNVC: 2

9 Jan 2013

5340-12-321-4307
Angle Bracket

123214307
620-U5: RNCC: 3 | RNVC: 2

17 May 1990

5340-12-700-8467
Loop Clamp

127008467
VG95211-ML-127008467: RNCC: 2 | RNVC: 2
14 02 OST1 11149-73: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-8717
Mounting Bracket

123938717
11.29225-0015: RNCC: 3 | RNVC: 2
11.29225-0015: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-12-301-7489
Retaining Strap

123017489
2300107-500000.18: RNCC: 2 | RNVC: 2
2300107-500000.18: RNCC: 3 | RNVC: 2
2300107-500000.18: RNCC: 5 | RNVC: 9
2300107-500000.18: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-331-6015
Nonmetallic Bumper

123316015
VG95092B35X28,5X40X7X20NR70: RNCC: 2 | RNVC: 2
13 9000 468: RNCC: 2 | RNVC: 2
13 9000 468: RNCC: 3 | RNVC: 2
13 9000 468: RNCC: 5 | RNVC: 2

27 May 1993

5340-12-321-9176
Mounting Bracket

123219176
DSBI001: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-320-1189
Kunst Gleitschiene

123201189
0956501: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-011-6333

5340-12-349-5608
Grooved Clamp Coupling Ferrule

123495608
JN0083-25: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-12-702-8513
Permanent Magnet

127028513
52-04007370277: RNCC: 2 | RNVC: 2

3 Jan 1996

5340-12-340-6384
Mounting Bracket

123406384
2W132D001-0000.02: RNCC: 2 | RNVC: 2
2W132D001-0000.02: RNCC: 3 | RNVC: 2

15 May 1996

5340-12-384-2818
Bow Handle

123842818
20808-082: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-12-185-2570
Angle Bracket

121852570
909041-4000: RNCC: 3 | RNVC: 2
81423900012: RNCC: 5 | RNVC: 2

25 Sep 1980

5340-12-340-5785
Buckle

123405785
P 20568: RNCC: 3 | RNVC: 2
P20 568: RNCC: 5 | RNVC: 2

7 May 1996

5340-12-356-5226
Access Cover

123565226
2300395-970162.000.0: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-325-8995
Helical Compression Spring Retainer

123258995
2500194-322611.00.0: RNCC: 2 | RNVC: 2
2500194-322611.00.0: RNCC: 3 | RNVC: 2

19 Jul 1991

5340-12-328-9072
Bow Handle

123289072
2V4650-A: RNCC: 3 | RNVC: 2
2V4650-A: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-326-8828
Spring Loaded Cylinder Fastener

123268828
7500.989.3: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-360-8913
Clamping Catch

123608913
P70144123000: RNCC: 2 | RNVC: 2
P70144123000: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-12-345-7105
Manual Control Lever

123457105
2300211-991470.000.0: RNCC: 2 | RNVC: 2
2300211-991470.000.0: RNCC: 3 | RNVC: 2

17 Apr 1998

5340-12-384-8122
Helical Compression Spring Seat

123848122
0612-222: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-12-351-6317
Manual Control Lever

123516317
12027902: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-12-358-6854
Runner

123586854
EZ102042: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-090-1763

5340-12-382-1627
Mounting Bracket

123821627
5232030644: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-319-4792
Mending Plate

123194792
418598: RNCC: 3 | RNVC: 2
418598: RNCC: 5 | RNVC: 2

5 Oct 1989

5340-12-345-4072
Mending Plate

123454072
54.0053.300.08: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-12-350-3436
Access Cover

123503436
105-60901.20: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-353-7713
Rod End Clevis

123537713
CBD45103P01: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-377-6118
Spring Tension Clip

123776118
KE 90055 9000: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-12-378-3575
Retaining Strap

123783575
41017510: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-091-2529

5340-12-358-8110
Nonmetallic Bumper

123588110
6732910286: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-12-312-7527
Loop Clamp

123127527
4338ELEKTROBRAUN: RNCC: 3 | RNVC: 2
4338: RNCC: 5 | RNVC: 2
6L.3821.012-722975: RNCC: 5 | RNVC: 2

2 Feb 1988

5340-12-364-2472
Angle Bracket

123642472
4405512940: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-348-0193
Friction Catch

123480193
BRAD017: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-199-1279
Dust And Moisture Seal Protective Cap

121991279
3352640096: RNCC: 3 | RNVC: 2

28 Mar 1984

5340-12-344-0503
Mounting Bracket

123440503
2996.13.68: RNCC: 3 | RNVC: 2
2996.1368: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-136-5783

5340-12-176-5509
Butt Hinge Leaf

121765509
LN9172AF915: RNCC: 2 | RNVC: 2

5 Dec 1978

5340-12-164-6023
Mending Plate

121646023
681-22200-02: RNCC: 3 | RNVC: 2
681-22200-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-8356
Lock Key

123548356
8601-0004: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-180-9312
Dust And Moisture Seal Protective Cap

121809312
AFG014751: RNCC: 3 | RNVC: 2
AFG17-01-09-01-14: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-188-5426
Clamping Catch

121885426
PAN5109-21S: RNCC: 3 | RNVC: 2

16 Jul 1981

5340-12-181-9323
Electrical-Mechanical Equipment Post

121819323
5800823-31-005: RNCC: 3 | RNVC: 2
5800823-31.005: RNCC: 5 | RNVC: 2
5800823-31-005: RNCC: 5 | RNVC: 9

28 Dec 1979

5340-12-152-4542
Retaining Strap

121524542
115-03588-4: RNCC: 3 | RNVC: 9
1092105-0100-023: RNCC: 5 | RNVC: 9
1092105-0100-023: RNCC: 5 | RNVC: 9
4-7822-825: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-5763
Angle Bracket

123215763
P-886763-401: RNCC: 3 | RNVC: 2
P886763-401: RNCC: 5 | RNVC: 2

5 Jun 1990

5340-12-188-8293
Manual Control Handle

121888293
2500075-191213.002.0: RNCC: 2 | RNVC: 2
2500075-191213.002.0: RNCC: 3 | RNVC: 2
2500075-191213-002-0: RNCC: 5 | RNVC: 9
2500075-191213-002-0: RNCC: 5 | RNVC: 9
2500075-191213.002.0: RNCC: 5 | RNVC: 9

3 Aug 1981

5340-12-701-5682
Mounting Bracket

127015682
VG95211-ML-127015682: RNCC: 2 | RNVC: 2
5.12.6149.0020.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-070-1639

5340-12-310-0846
Dust And Moisture Seal Protective Cap

123100846
4025090659: RNCC: 3 | RNVC: 2

6 Apr 1987

5340-12-351-8073
Nonmetallic Bumper

123518073
10063-212000.03: RNCC: 3 | RNVC: 2
10063-212000.03: RNCC: 5 | RNVC: 9

28 Aug 2000

5340-12-307-0768
Retaining Strap

123070768
52297: RNCC: 3 | RNVC: 2

6 May 1986

5340-12-307-6834
Mending Plate

123076834
RP658105: RNCC: 3 | RNVC: 2

16 Jul 1986

5340-12-353-9284
Double Angle Bracket

123539284
4618270114: RNCC: 3 | RNVC: 2
46182701146431: RNCC: 5 | RNVC: 2

18 May 2001

5340-12-369-2241
Runner

123692241
200 225: RNCC: 3 | RNVC: 2
FS9P: RNCC: 5 | RNVC: 2

7 Jun 2006

5340-12-135-6711

5340-12-011-6134

5340-12-189-5522
Dust And Moisture Seal Protective Cap

121895522
R21759: RNCC: 3 | RNVC: 2
R21759: RNCC: 5 | RNVC: 9

5 Oct 1981

5340-12-307-3751
Electrical-Mechanical Equipment Post

123073751
431271223791: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-300-3144
Leather Strap

123003144
3097900096: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-369-1421
Double Angle Bracket

123691421
1404001-700.03: RNCC: 2 | RNVC: 2
1404001-700.03: RNCC: 3 | RNVC: 2

30 May 2006

5340-12-362-1478
Angle Bracket

123621478
00M0230000024011: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-12-374-9618
Mechanic Equipment Hardware Kit

123749618
279.662 522: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-12-044-2153

5340-12-091-7919

5340-12-043-8870

5340-12-334-9745
Mounting Bracket

123349745
27 0319 253: RNCC: 2 | RNVC: 2
27 0319 253: RNCC: 3 | RNVC: 2
27 0319 253: RNCC: 5 | RNVC: 9

7 Jul 1994

5340-12-323-4205
Snap Hook

123234205
3121401 V: RNCC: 3 | RNVC: 2
245S140X12VERZINKT: RNCC: 3 | RNVC: 2
245 S-140X12 VERZINKT: RNCC: 3 | RNVC: 9
245S140X12MM: RNCC: 5 | RNVC: 2
245S-140X12VERZINKT: RNCC: 5 | RNVC: 9

23 Nov 1990

5340-12-702-1590
Angle Bracket

127021590
VG95211-ML-127021590: RNCC: 2 | RNVC: 2
30.6409-4: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-320-1489
Butt Hinge Leaf

123201489
16176-01: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-12-354-1252
Dust And Moisture Seal Protective Cap

123541252
800/7/8-14UNF: RNCC: 3 | RNVC: 2
GPN800 7/8-14UNF: RNCC: 5 | RNVC: 2

6 Jun 2001

5340-12-329-0638
Casement Fastener

123290638
TL7330-0029-9: RNCC: 2 | RNVC: 2
37130301: RNCC: 3 | RNVC: 2
8100441-4110: RNCC: 5 | RNVC: 9
TL7330-0029 LFD.NR.9: RNCC: 5 | RNVC: 9
8100441-1100: RNCC: 5 | RNVC: 9

15 Jul 1992

5340-12-309-6220
Loop Clamp

123096220
KMS010-830200.003.0: RNCC: 3 | RNVC: 2

10 Feb 1987

5340-12-701-6782
Angle Bracket

127016782
VG95211-ML-127016782: RNCC: 2 | RNVC: 2
5.12.7211.9100.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-193-7967
Angle Bracket

121937967
8-4902-04: RNCC: 2 | RNVC: 2
8-4902.04: RNCC: 2 | RNVC: 2
8-4902.04: RNCC: 3 | RNVC: 2
8-4902.04: RNCC: 5 | RNVC: 9
8-4902-04: RNCC: 5 | RNVC: 9

31 Aug 1982

5340-12-199-9034
Webbing Strap

121999034
79026/053-0800: RNCC: 3 | RNVC: 2
220-00-0051.4: RNCC: 5 | RNVC: 2
79026/053-800: RNCC: 5 | RNVC: 2

15 Jun 1984

5340-12-332-7813
Extension Drawer Slide Section

123327813
7075685: RNCC: 3 | RNVC: 2

17 Sep 1993

5340-12-156-3558

5340-12-702-5995
Loop Clamp

127025995
VG95211-ML-127025995: RNCC: 2 | RNVC: 2
5150A-16: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-168-5494
Nut And Bolt Locking Plate

121685494
41468: RNCC: 3 | RNVC: 2
909530133: RNCC: 5 | RNVC: 2

18 Mar 1977

5340-12-355-4869
Mounting Bracket

123554869
4615040040: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-355-7426
Multiple Angle Bracket

123557426
4618261314: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-12-355-9396
Section Block Clamp

123559396
5559952668: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-12-191-8311
Retaining Band

121918311
136.190: RNCC: 3 | RNVC: 2
1016-1600-0101: RNCC: 5 | RNVC: 2
E1016-1600-0101: RNCC: 5 | RNVC: 9

8 Mar 1982

5340-12-318-8794
Electronic Equipment Hardware Kit

123188794
870/002-120: RNCC: 3 | RNVC: 2
870/002-120: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-323-7417
Access Cover

123237417
4603510009: RNCC: 3 | RNVC: 2
3009-19: RNCC: 5 | RNVC: 2

12 Dec 1990

5340-12-186-8647
Helical Compression Spring Retainer

121868647
7001-004-110: RNCC: 3 | RNVC: 2
1227-002-001: RNCC: 5 | RNVC: 9

13 Feb 1981

5340-12-186-4389
Resilient Mount

121864389
51962100022: RNCC: 3 | RNVC: 2
500040-M10X15-M10X20.NR60.ST: RNCC: 5 | RNVC: 2
VG95363A50X20-M10X15M10X20NR60ST: RNCC: 5 | RNVC: 9

30 Dec 1980

5340-12-389-0715
Expansion Shield

123890715
NO PRIMARY REF 12-389-0715: RNCC: 3 | RNVC: 2
2500602173: RNCC: 5 | RNVC: 2
924205: RNCC: 5 | RNVC: 2
924205: RNCC: 5 | RNVC: 2

24 May 2012

5340-12-353-8609
Double Angle Bracket

123538609
J92222216-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-193-7276
Loop Clamp

121937276
900729-01: RNCC: 3 | RNVC: 2

25 Aug 1982

5340-12-199-7188
Handle Grip

121997188
43704133-602: RNCC: 2 | RNVC: 2
43704133-602: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-043-6470

5340-12-365-3509
Mounting Bracket

123653509
1837-199810.001.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-364-4801
Access Cover

123644801
2500306-390108.000.0: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-313-2935
Dust And Moisture Seal Protective Plug

123132935
700M20 RAL9005: RNCC: 3 | RNVC: 2
700002080: RNCC: 5 | RNVC: 9
GPN700,M20F.A.RAL9005: RNCC: 5 | RNVC: 9

18 Mar 1988

5340-12-356-1648
T Bracket

123561648
1262777540: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-12-385-8251
Manual Control Lever

123858251
2201032: RNCC: 3 | RNVC: 2
2.201 032: RNCC: 5 | RNVC: 2
Z=2.201 032: RNCC: 5 | RNVC: 2

12 Jul 2011

5340-12-326-8302
Bow Handle

123268302
43.921.07 MIT 5,5MM BOHRUNGEN: RNCC: 3 | RNVC: 2
CF 822 099 AR: RNCC: 5 | RNVC: 2
CF822099AR: RNCC: 5 | RNVC: 2
CF 822 099 AR: RNCC: 5 | RNVC: 2

30 Oct 1991

5340-12-376-3179
Nut And Bolt Locking Plate

123763179
832B06018/1: RNCC: 3 | RNVC: 2

11 Sep 2008

5340-12-336-2877
Access Cover

123362877
CF 469 250 BE: RNCC: 2 | RNVC: 2
CF 469 250 BE: RNCC: 3 | RNVC: 2
CF 469 250 AE: RNCC: 5 | RNVC: 2
CF 469 250 AE: RNCC: 5 | RNVC: 2
CF 469 250 BE B: RNCC: 5 | RNVC: 2
CF 469 250 AE: RNCC: 5 | RNVC: 2
CF 469 250 BE: RNCC: 5 | RNVC: 2

8 Nov 1994

5340-12-323-8709
Access Cover

123238709
9.02.010.106: RNCC: 3 | RNVC: 2
9.02.010.106: RNCC: 5 | RNVC: 2

2 Jan 1991

5340-12-176-1312
Dust And Moisture Seal Protective Plug

121761312
CF 418 943 A: RNCC: 2 | RNVC: 2
CF 418 943 A: RNCC: 3 | RNVC: 2
CF 418 943 A: RNCC: 5 | RNVC: 2
CF418943A: RNCC: 5 | RNVC: 2
CF 418 943 A: RNCC: 5 | RNVC: 2
CF418943A: RNCC: 5 | RNVC: 2
CF418943A: RNCC: 5 | RNVC: 2

9 Nov 1978

5340-12-162-2002
Electrical-Mechanical Equipment Post

121622002
3414028719: RNCC: 3 | RNVC: 2
34140 28719: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-4802
Double Angle Bracket

123044802
2300106-230900.06: RNCC: 2 | RNVC: 2
2300106-230900.06: RNCC: 3 | RNVC: 2
2300106-230900.06: RNCC: 5 | RNVC: 9
2300106-230900.06: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-044-1573

5340-12-327-3547
Mending Plate

123273547
272.332 275: RNCC: 2 | RNVC: 2
272.332.275: RNCC: 3 | RNVC: 2
272.332 275: RNCC: 5 | RNVC: 9

15 Jan 1992

5340-12-025-5942

5340-12-355-3322
Mechanic Equipment Hardware Kit

123553322
160.23.0001: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-350-4376
Section Block Clamp

123504376
JN0413EH44: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-130-9246
Nonmetallic Bumper

121309246
6175600: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-128-0661

5340-12-143-7083

5340-12-333-3209
Mounting Bracket

123333209
0049-801000A11B: RNCC: 2 | RNVC: 2
0049-801000A11B: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-12-171-0458
Loop Clamp

121710458
211251307: RNCC: 3 | RNVC: 9

1 Sep 1977

5340-12-149-4958
Resilient Mount

121494958
845-N688.NR55.ST: RNCC: 3 | RNVC: 2
N688FJ65: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-389-5115
Spring Loaded Cylinder Fastener

123895115
2109042: RNCC: 3 | RNVC: 2
7KK278: RNCC: 5 | RNVC: 2
2109042: RNCC: 5 | RNVC: 2

16 Jul 2012

5340-12-390-0529
Rigid Caster

123900529
40741: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-345-5847
Access Cover

123455847
62.7000.112.00-A001: RNCC: 2 | RNVC: 2
62.7000.112.00-A001: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-332-7388
Butt Hinge

123327388
9205 765 694: RNCC: 3 | RNVC: 2
9205.765.694: RNCC: 5 | RNVC: 2
9205765694: RNCC: 5 | RNVC: 2
9205 765 694: RNCC: 5 | RNVC: 9

14 Sep 1993

5340-12-390-7650
Expansion Shield

123907650
16739: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-12-373-8742
Access Cover

123738742
BD8102G012: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-12-352-2944
Mounting Plate

123522944
T521M0201215: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-378-6267
Mounting Plate

123786267
58R052-67129: RNCC: 2 | RNVC: 2
58R052-67129: RNCC: 3 | RNVC: 2

27 Apr 2009

5340-12-342-1563
Mounting Plate

123421563
136M55050: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-353-1480
Mounting Bracket

123531480
5062033740: RNCC: 3 | RNVC: 2
506 203 37 40: RNCC: 5 | RNVC: 2

2 Feb 2001

5340-12-376-0678
Mounting Bracket

123760678
G1Z2876E0002: RNCC: 3 | RNVC: 2
ND10159: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-12-043-6992

5340-12-044-1991

5340-12-187-4123
Mounting Bracket

121874123
472.3345: RNCC: 3 | RNVC: 2
4723345: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-353-8013
Mending Plate

123538013
19005326: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-344-0589
Double Angle Bracket

123440589
7620252: RNCC: 3 | RNVC: 2
762.0252: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-383-9514
Loop Clamp

123839514
6.373-213.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-702-4253
Dust And Moisture Seal Protective Cap

127024253
VG95211-ML-127024253: RNCC: 2 | RNVC: 2
5.12.7212.8020.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-317-2374
Mounting Plate

123172374
5-440-510: RNCC: 3 | RNVC: 2
440 510: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-359-9672
Quick Release Plunger

123599672
GN615-M10-KSN: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-198-5108
Bow Handle

121985108
VG95149A120X49AL-SW: RNCC: 2 | RNVC: 2
9694002150: RNCC: 3 | RNVC: 2
3280.1303: RNCC: 5 | RNVC: 2

3 Feb 1984

5340-12-162-7618
Angle Bracket

121627618
21 603-002: RNCC: 3 | RNVC: 2
21603-002: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-094-6316

5340-12-315-3036
Rod End Clevis

123153036
1809141000: RNCC: 3 | RNVC: 2
000 252 21 14: RNCC: 5 | RNVC: 2
0002522114: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-307-3483
Angle Bracket

123073483
0300-0596T: RNCC: 3 | RNVC: 2

6 Jun 1986

5340-12-327-3810
Mounting Bracket

123273810
803959849: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-315-3708
Mounting Bracket

123153708
068130173B: RNCC: 3 | RNVC: 2

18 Oct 1988

5340-12-315-3100
Mounting Bracket

123153100
66.3523.535.00-A002: RNCC: 3 | RNVC: 2
254819: RNCC: 5 | RNVC: 2

12 Oct 1988

5340-12-383-3780
Mechanic Equipment Hardware Kit

123833780
9011521A: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-12-181-7103
Butt Hinge Leaf

121817103
50376: RNCC: 3 | RNVC: 2
81913200059: RNCC: 5 | RNVC: 2
M20281: RNCC: 5 | RNVC: 2

12 Dec 1979

5340-12-372-4901
Door Handle Unit

123724901
10060050: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-378-4770
Mounting Bracket

123784770
1043 327 027: RNCC: 3 | RNVC: 2
1043 327 027: RNCC: 5 | RNVC: 2

8 Apr 2009

5340-12-359-8482
Dust And Moisture Seal Protective Cap-Plug

123598482
610U21RAL3000: RNCC: 3 | RNVC: 2
610U21ROT: RNCC: 5 | RNVC: 9
GPN610-U21RAL3000: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-306-3817
Angle Bracket

123063817
4069125214: RNCC: 3 | RNVC: 2

25 Feb 1986

5340-12-302-7137
Spring Tension Clip

123027137
11.009.207-4: RNCC: 3 | RNVC: 2
11-009-207-4: RNCC: 5 | RNVC: 2

24 Jan 1985

5340-12-375-8533
Spring Tension Clip

123758533
D-110-277-V: RNCC: 3 | RNVC: 2
D110277V: RNCC: 5 | RNVC: 2

11 Jul 2008

5340-12-329-3485
Loop Clamp

123293485
47.63.643: RNCC: 3 | RNVC: 2
6.491-147.0: RNCC: 5 | RNVC: 2
03727100: RNCC: 5 | RNVC: 2
03727100.164: RNCC: 5 | RNVC: 2

8 Aug 1992

5340-12-362-7801
Loop Clamp

123627801
DIN3016-1-D2-24-30X20-W1-2-CR: RNCC: 2 | RNVC: 2

31 Mar 2004

5340-12-303-5919
Retaining Strap

123035919
704-127120-000-0: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-186-2260
Electrical-Mechanical Equipment Post

121862260
1246-4402.2: RNCC: 2 | RNVC: 2
VG95148A5XM3X26,5-3.1645.51-EQE1: RNCC: 3 | RNVC: 2
1246-4402.2: RNCC: 3 | RNVC: 2
1246-4402-2: RNCC: 5 | RNVC: 2

6 Dec 1980

5340-12-326-4162
Nonmetallic Bumper

123264162
714-001200-910-0: RNCC: 2 | RNVC: 2
714-001200-910-0: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-12-386-0321
Access Cover

123860321
2005656: RNCC: 3 | RNVC: 2
SK913-050000.001.0: RNCC: 5 | RNVC: 2
4616900327: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-12-702-5252
Mounting Bracket

127025252
VG95211-ML-127025252: RNCC: 2 | RNVC: 2
5.51.7010.0290.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-187-2667
Helical Compression Spring Seat

121872667
895-363-300-4: RNCC: 3 | RNVC: 2
123-1439: RNCC: 5 | RNVC: 2
123-1439: RNCC: 5 | RNVC: 9

23 Mar 1981

5340-12-301-6363
Access Cover

123016363
43712138-601: RNCC: 2 | RNVC: 2
43712138-601: RNCC: 3 | RNVC: 2
43712138-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-308-7215
Double Angle Bracket

123087215
1281-14400.15: RNCC: 2 | RNVC: 2
159278: RNCC: 3 | RNVC: 2
1281-14400.15: RNCC: 5 | RNVC: 2

11 Nov 1986

5340-12-010-2333

5340-12-308-9809
Clamping Catch

123089809
0011031001: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-12-329-8691
Butt Hinge Leaf

123298691
VG95211-ML-123298691: RNCC: 2 | RNVC: 2
65207-09001Y110: RNCC: 3 | RNVC: 2
65207-09001Y110: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-156-5552
Electrical-Mechanical Equipment Post

121565552
VG95148B5,5XM3X37-AL: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X37-AL: RNCC: 3 | RNVC: 2
ZXD11021-37: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-147-5228
Electrical-Mechanical Equipment Post

121475228
15104G8000091033: RNCC: 3 | RNVC: 2
15104G8000091033: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-327-6247
Flush Lock

123276247
0.078.465.9: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-12-312-3168
Angle Bracket

123123168
2300103-262031.00.0: RNCC: 3 | RNVC: 2
2300103-262031.00.0: RNCC: 5 | RNVC: 9

15 Dec 1987

5340-12-166-6514
Helical Compression Spring Retainer

121666514
WW 415 313 H: RNCC: 2 | RNVC: 2
WW 415 313 H: RNCC: 3 | RNVC: 9
WW 415 313 H: RNCC: 5 | RNVC: 2
WW 415 313 G: RNCC: 5 | RNVC: 9
WW415313F: RNCC: 5 | RNVC: 9
WW 415 313 F: RNCC: 5 | RNVC: 9
WW 415 313 G: RNCC: 5 | RNVC: 9
WW 415 313 F: RNCC: 5 | RNVC: 9
WW415313F: RNCC: 5 | RNVC: 9
WW 415 313 G: RNCC: 5 | RNVC: 9

30 Sep 1976

5340-12-362-1679
Butt Hinge

123621679
1110-U5-N: RNCC: 3 | RNVC: 2
10025460: RNCC: 5 | RNVC: 2

19 Jan 2004

5340-12-309-6704
Shock Mount Pad

123096704
FM450-1: RNCC: 3 | RNVC: 2
FM450-1: RNCC: 5 | RNVC: 9

16 Feb 1987

5340-12-330-7775
Plain Solid Disk

123307775
AFG0396648: RNCC: 3 | RNVC: 2
0396648: RNCC: 5 | RNVC: 2

8 Feb 1993

5340-12-351-5036
Multiple Angle Bracket

123515036
4616160213: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-359-6037
Mounting Bracket

123596037
9433236484: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-187-5458
Dust And Moisture Seal Protective Plug

121875458
600B660: RNCC: 3 | RNVC: 2
GPN600B660: RNCC: 5 | RNVC: 2
600066000: RNCC: 5 | RNVC: 9
B660: RNCC: 5 | RNVC: 9
B660GPN600: RNCC: 5 | RNVC: 9
GPN600,B660: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-322-2330
Mending Plate

123222330
272.308 584: RNCC: 2 | RNVC: 2
272.308.584: RNCC: 3 | RNVC: 2
272.308 584: RNCC: 5 | RNVC: 9

3 Aug 1990

5340-12-321-9513
Dust And Moisture Seal Protective Plug

123219513
1500500007: RNCC: 3 | RNVC: 2
1500500007: RNCC: 5 | RNVC: 2
1 500 500 007: RNCC: 5 | RNVC: 2
1500500007: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-12-361-4307
Mounting Plate

123614307
1873-830009.001.0: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-389-9730
Hand Crank

123899730
ZBT006.0006: RNCC: 3 | RNVC: 2

19 Sep 2012

5340-12-334-3836
Electronic Equipment Hardware Kit

123343836
53.1613.451.13: RNCC: 3 | RNVC: 2

3 May 1994

5340-12-126-0307

5340-12-305-5633
Electrical-Mechanical Equipment Post

123055633
379219: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-197-7472
Metal Runner

121977472
4099901: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-336-2847
Angle Bracket

123362847
4620 335 100: RNCC: 3 | RNVC: 2
4620335100: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-364-5725
Mounting Bracket

123645725
T257M2122101: RNCC: 2 | RNVC: 2
T257M2122101: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-12-309-5693
Lock-Release Lever

123095693
6109501: RNCC: 3 | RNVC: 2

4 Feb 1987

5340-12-122-5826
Loop Clamp

121225826
02-4041-1032-00: RNCC: 3 | RNVC: 2
024041103200: RNCC: 5 | RNVC: 2
4044230123: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-316-4009
Mounting Bracket

123164009
5801998-418000.00: RNCC: 2 | RNVC: 2
5801998-418000.00: RNCC: 3 | RNVC: 2
5801998-418000.00: RNCC: 5 | RNVC: 9

16 Jan 1989

5340-12-168-5650
Mending Plate

121685650
1000025-100000-11: RNCC: 3 | RNVC: 2
1000025-100000.11: RNCC: 3 | RNVC: 2
1000025-100000-11: RNCC: 5 | RNVC: 9
1000025-100000.11: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-331-6308
Double Angle Bracket

123316308
702-145310-000-0: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-12-168-5697
Door Button

121685697
1000025-260700.04: RNCC: 3 | RNVC: 2
1000025-260700-04: RNCC: 3 | RNVC: 2
1000025-260700-04: RNCC: 5 | RNVC: 9
1000025-260700.04: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-315-5800
Metal Runner

123155800
512214-3550.000: RNCC: 3 | RNVC: 2
512214-3550: RNCC: 5 | RNVC: 2

10 Nov 1988

5340-12-702-5475
Mounting Plate

127025475
VG95211-ML-127025475: RNCC: 2 | RNVC: 2
5.51.7211.1040.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-174-2297
Hinged Hasp

121742297
7882586: RNCC: 3 | RNVC: 2
7882-586: RNCC: 5 | RNVC: 2
1000025-535930: RNCC: 5 | RNVC: 9

15 Jun 1978

5340-12-197-9328
Nonmetallic Bumper

121979328
DIN95364-C100X45-NR55ST: RNCC: 2 | RNVC: 2
81150-100X45-M16.NR55.ST: RNCC: 5 | RNVC: 2
1.100.45.5.55NR/ST: RNCC: 5 | RNVC: 2
7-125-1910: RNCC: 5 | RNVC: 2
0408115: RNCC: 5 | RNVC: 2
8516233: RNCC: 5 | RNVC: 2
VG95364-C100X45-NR55ST: RNCC: 5 | RNVC: 9
60481: RNCC: 5 | RNVC: 9

2 Dec 1983

5340-12-309-4702
Lock-Release Lever

123094702
AFG0348397: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-12-357-0399
Clamping Catch

123570399
A2527447200000: RNCC: 3 | RNVC: 2
A2527447200000: RNCC: 5 | RNVC: 9

25 Apr 2002

5340-12-361-0012
Lock Bolt

123610012
62171: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-390-0273
Mounting Bracket

123900273
313616: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-389-1327
Expansion Shield

123891327
073690: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-318-9984
Pipe Bracket

123189984
2653-330610.00: RNCC: 2 | RNVC: 2
2653-330610.00: RNCC: 3 | RNVC: 2

30 Aug 1989

5340-12-350-8447
Mounting Bracket

123508447
105-911581: RNCC: 3 | RNVC: 2

29 May 2000

5340-12-391-5694
Dust And Moisture Seal Protective Plug

123915694
2315390: RNCC: 3 | RNVC: 2
02315390: RNCC: 5 | RNVC: 2

20 Mar 2013

5340-12-195-5875

5340-12-386-7795
Mounting Plate

123867795
5802017-719600.04: RNCC: 2 | RNVC: 2
5802017-719600.04: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-12-364-2860
Retaining Bail

123642860
T661P1002234: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-365-9938
Mounting Bracket

123659938
9305452040: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-12-365-1248
Loop Clamp

123651248
4639950010: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-339-0481
Spring Loaded Cylinder Fastener

123390481
07.41.102.11: RNCC: 3 | RNVC: 2
0009310114: RNCC: 5 | RNVC: 2

4 Oct 1995

5340-12-199-3300
Mending Plate

121993300
3094920241: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-132-3183

5340-12-197-0542
Spring Tension Clip

121970542
9165.001.4: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-149-0932
Retaining Strap

121490932
121L21008: RNCC: 3 | RNVC: 2
28209952120: RNCC: 5 | RNVC: 9
8209952120: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-6270
Mounting Plate

123606270
5835300022: RNCC: 3 | RNVC: 2

18 Jun 2003

5340-12-311-8842
Access Cover

123118842
162386: RNCC: 2 | RNVC: 2
162386: RNCC: 3 | RNVC: 2
162386: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-139-6348
Retaining Strap

121396348
C22334A3C17: RNCC: 3 | RNVC: 2
TFS70-26993: RNCC: 5 | RNVC: 2
TTYP68T534: RNCC: 5 | RNVC: 2
C22334-A3-C17: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-194-4264
Split Tubular Clip

121944264
C40121-A143-A2: RNCC: 3 | RNVC: 2
REL.BF.143 B: RNCC: 5 | RNVC: 2
C40121A143A2: RNCC: 5 | RNVC: 2
RELBF143B: RNCC: 5 | RNVC: 2

3 Nov 1982

5340-12-387-8963
Dust And Moisture Seal Boot

123878963
R900879616: RNCC: 3 | RNVC: 2
19 00 186 FIG.A-3/121: RNCC: 5 | RNVC: 2

7 Feb 2012

5340-12-321-4894
Mending Plate

123214894
702-182020-901-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-332-4195
Double Angle Bracket

123324195
480-7347-07-10-00-1: RNCC: 3 | RNVC: 2
480/7347-07-10-00/1: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-142-7874
Nonmetallic Bumper

121427874
59005501: RNCC: 3 | RNVC: 2
30/25KERN-B-QUALITAET RTEII: RNCC: 3 | RNVC: 2
1-791386: RNCC: 5 | RNVC: 2
1.791386: RNCC: 5 | RNVC: 2
30-25KERNBQUALRTE2: RNCC: 5 | RNVC: 2
RT650916S: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-0606
Loop Clamp

123260606
0289 6089: RNCC: 3 | RNVC: 2
02896089KZ0608-79: RNCC: 5 | RNVC: 2

5 Aug 1991

5340-12-316-3997
Resilient Mount

123163997
5187654: RNCC: 3 | RNVC: 2

16 Jan 1989

5340-12-312-1331
Dust And Moisture Seal Protective Plug

123121331
81.96002.0131: RNCC: 3 | RNVC: 2
81960020131: RNCC: 5 | RNVC: 2

25 Nov 1987

5340-12-161-1302

5340-12-360-0040
Nonmetallic Bumper

123600040
9414320018: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-328-9180
Retaining Strap

123289180
52.3108.195.19: RNCC: 2 | RNVC: 2
52.3108.195.19: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-194-3756
Split Tubular Clip

121943756
81424015162: RNCC: 3 | RNVC: 2
81.42401.5162: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-366-1572
Bow Handle

123661572
331245: RNCC: 3 | RNVC: 2

15 Mar 2005

5340-12-352-6460
Dust And Moisture Seal Protective Cap

123526460
1290 306 084: RNCC: 3 | RNVC: 2
42490942: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-12-181-0470
Retaining Strap

121810470
81669132093: RNCC: 3 | RNVC: 2

19 Oct 1979

5340-12-176-3240
Loop Clamp

121763240
LN9491BK20: RNCC: 2 | RNVC: 2

23 Nov 1978

5340-12-302-2627
Mending Plate

123022627
42408178: RNCC: 3 | RNVC: 2
163773103: RNCC: 3 | RNVC: 2
42408178EZ7101-71: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-12-364-2061
Angle Bracket

123642061
4256222231: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-379-9378
Angle Bracket

123799378
1558088: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-391-3420
Block Clamp

123913420
ECS6088G1C08: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-327-0165
Staub- Und Stopfen

5340-12-388-8948
Mounting Bracket

123888948
122W400500.003.0: RNCC: 2 | RNVC: 2
122W400500.003.0: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-317-6898
Mending Plate

123176898
1000173-380003.000.0: RNCC: 2 | RNVC: 2
1000173-380003.000.0: RNCC: 3 | RNVC: 2

2 May 1989

5340-12-329-3748
Dust And Moisture Seal Protective Plug

123293748
0944688: RNCC: 3 | RNVC: 2
0944.688: RNCC: 5 | RNVC: 2
97E2.123.03-4: RNCC: 5 | RNVC: 2

14 Aug 1992

5340-12-315-4588
Hand Crank

123154588
00534100: RNCC: 3 | RNVC: 2

26 Oct 1988

5340-12-304-7506
Angle Bracket

123047506
0214 8644: RNCC: 3 | RNVC: 2
02148644EE0148-40: RNCC: 5 | RNVC: 2
4788751: RNCC: 5 | RNVC: 2

19 Aug 1985

5340-12-353-1567
Mounting Bracket

123531567
5062231140: RNCC: 3 | RNVC: 2
506 223 11 40: RNCC: 5 | RNVC: 2

5 Feb 2001

5340-12-377-1599
Mounting Bracket

123771599
41288112: RNCC: 3 | RNVC: 2

15 Dec 2008

5340-12-374-9914
Angle Bracket

123749914
2 0000-558: RNCC: 3 | RNVC: 2
2 0000-558: RNCC: 5 | RNVC: 2

10 Apr 2008

5340-12-325-7559
Lock-Release Lever

123257559
1000173-191330.000.0: RNCC: 2 | RNVC: 2
1000173-191330.000.0: RNCC: 3 | RNVC: 2

5 Jul 1991

5340-12-359-5411
Hinge Torsion Bar

123595411
1000173-190900.001.0: RNCC: 2 | RNVC: 2
1000173-190900.001.0: RNCC: 3 | RNVC: 2

14 Feb 2003

5340-12-359-8435
Mounting Bracket

123598435
1868-254000.000.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-197-3682
Dust And Moisture Seal Protective Cap

121973682
ME6695: RNCC: 3 | RNVC: 2

17 Oct 1983

5340-12-301-6076
Double Angle Bracket

123016076
2300107-310000.09: RNCC: 2 | RNVC: 2
2300107-310000.09: RNCC: 3 | RNVC: 2
2300107-310000.09: RNCC: 5 | RNVC: 9
2300107-310000.09: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-301-0998
Metal Runner

123010998
54.0028.574.02: RNCC: 3 | RNVC: 2

21 Sep 1984

5340-12-149-1172
Angle Bracket

121491172
521L02030: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-370-2151
Retaining Strap

123702151
21397-T02: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-12-320-1322
Rod End Clevis

123201322
297560: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-328-6739
Resilient Mount

123286739
701407087: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-301-8400
Hand Crank

123018400
3354030130: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-12-149-1006
Loop Clamp

121491006
121M05709D1: RNCC: 3 | RNVC: 2
121M05709: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-1390
Butt Hinge

123081390
3008080038: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-364-4835
Loop Clamp

123644835
465001: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-364-4790
Access Cover

123644790
2654-350730.05: RNCC: 2 | RNVC: 2
2654-350730.05: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-011-5679

5340-12-305-5503
Bridge Clamp

123055503
5802017-600271.01: RNCC: 2 | RNVC: 2
5802017-600271.01: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-383-2807
Electronic Equipment Hardware Kit

123832807
041160030000: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-12-173-5277
Resilient Mount

121735277
171199214: RNCC: 3 | RNVC: 9

19 Apr 1978

5340-12-368-5170
Mortise Lock Set

123685170
234.52.655: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-12-383-3599
Door Holder

123833599
221-9101: RNCC: 3 | RNVC: 2

11 Oct 2010

5340-12-379-4729
Nonmetallic Solid Wheel

123794729
614,002,0342: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-12-188-0178
Retaining Strap

121880178
BSS15X25X3ZWL: RNCC: 3 | RNVC: 2
BSS15X25X3ZWEILASCHIG: RNCC: 5 | RNVC: 2
15310000015: RNCC: 5 | RNVC: 2
5310000015: RNCC: 5 | RNVC: 2

27 May 1981

5340-12-176-4772
Angle Bracket

121764772
8381870146: RNCC: 2 | RNVC: 2
8381870146: RNCC: 3 | RNVC: 2

29 Nov 1978

5340-12-176-2593

5340-12-354-1601
Retaining Bail

123541601
4166212: RNCC: 3 | RNVC: 2
6503.201.10.10.000: RNCC: 5 | RNVC: 2

12 Jun 2001

5340-12-314-2866
Dust And Moisture Seal Protective Cap

123142866
HP020-5-74: RNCC: 3 | RNVC: 2
K-HP30805-2: RNCC: 5 | RNVC: 2

23 Jun 1988

5340-12-148-6276
Butt Hinge

121486276
25858-5100.01: RNCC: 2 | RNVC: 2
25858-5100.01: RNCC: 3 | RNVC: 2
25858-5100.01: RNCC: 5 | RNVC: 9
HT17/3891/01: RNCC: 5 | RNVC: 9
25858-5100-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-5466
Handwheel

121955466
DIN950-F4-250X24-AL-PA-11RAL2000: RNCC: 3 | RNVC: 2
3632-1131: RNCC: 3 | RNVC: 2
F4-250X24DIN950-AL-RILSANRAL2000: RNCC: 5 | RNVC: 2
K3-016-250X24: RNCC: 5 | RNVC: 2

9 Mar 1983

5340-12-156-0775
Spring Tension Clip

121560775
30-5120-049: RNCC: 3 | RNVC: 2
303-100-0052-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-171-1207
Flush Lock

121711207
18390020407: RNCC: 3 | RNVC: 2
81.62680-6056: RNCC: 5 | RNVC: 2
81-62680-6056: RNCC: 5 | RNVC: 2
1203680: RNCC: 5 | RNVC: 2
81626806056: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-701-4304
Mounting Bracket

127014304
VG95211-ML-127014304: RNCC: 2 | RNVC: 2
5.12.5312.8001.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-347-8825
Handwheel

123478825
620003: RNCC: 3 | RNVC: 2
300004: RNCC: 5 | RNVC: 2

3 Mar 1999

5340-12-180-7863
Access Cover

121807863
1246-51: RNCC: 2 | RNVC: 2
1246-51: RNCC: 3 | RNVC: 2
1246-51: RNCC: 5 | RNVC: 9

4 Oct 1979

5340-12-354-8291
Multiple Angle Bracket

123548291
2300458-417730.000: RNCC: 2 | RNVC: 2
9944435: RNCC: 3 | RNVC: 2
2300458-417730.000: RNCC: 5 | RNVC: 9

29 Aug 2001

5340-12-377-0845
Mending Plate

123770845
41226271: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-12-352-7801
Mounting Bracket

123527801
416032987: RNCC: 3 | RNVC: 2
CCC416032987: RNCC: 5 | RNVC: 2

14 Dec 2000

5340-12-377-8871
Angle Bracket

123778871
42086044: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-12-044-4437

5340-12-043-2683

5340-12-361-9978
Door Button

123619978
1000-U229: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-338-9379
Access Cover

123389379
7821072090: RNCC: 3 | RNVC: 2
78210 72090: RNCC: 5 | RNVC: 9

13 Sep 1995

5340-12-319-7799
Bow Handle

123197799
3818150136: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-12-313-1279
Retaining Strap

123131279
109230-2140.013: RNCC: 3 | RNVC: 2

5 Mar 1988

5340-12-392-9877
Mounting Bracket

123929877
4000005460: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-339-2210
Mending Plate

123392210
279.613 994: RNCC: 3 | RNVC: 2
279.613 994: RNCC: 5 | RNVC: 2

26 Oct 1995

5340-12-327-0951
Flush Lock

123270951
3210Z: RNCC: 3 | RNVC: 2
3210Z: RNCC: 5 | RNVC: 2

29 Nov 1991

5340-12-041-6981

5340-12-314-3836
Resilient Mount

123143836
80-270.500: RNCC: 3 | RNVC: 2
8-270.500: RNCC: 5 | RNVC: 2
80-270.500: RNCC: 5 | RNVC: 2
3280 0200: RNCC: 5 | RNVC: 9
8-270.500: RNCC: 5 | RNVC: 9
80-270.500: RNCC: 5 | RNVC: 9
NR.80-270.500: RNCC: 5 | RNVC: 9

1 Jul 1988

5340-12-314-6710
Angle Bracket

123146710
512214-3763.000: RNCC: 3 | RNVC: 2
512214-3763: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-331-9026
Mounting Bracket

123319026
708-135950-000-0: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-12-317-4420
Resilient Mount

123174420
DIN95363-C30X30-NR55ST: RNCC: 2 | RNVC: 2
31660/C-BSTN5590: RNCC: 5 | RNVC: 2
31660/I-BSTN5590: RNCC: 5 | RNVC: 2
81120-30X30-M8.NR55.ST: RNCC: 5 | RNVC: 2
31660/I-CSM550: RNCC: 5 | RNVC: 2
VG95363-C30X30-NR55ST: RNCC: 5 | RNVC: 9

7 Apr 1989

5340-12-330-7036
Mounting Plate

123307036
0853 1224.055: RNCC: 3 | RNVC: 2
8531224.055: RNCC: 5 | RNVC: 2

28 Jan 1993

5340-12-380-7076
Mounting Bracket

123807076
5550781141: RNCC: 3 | RNVC: 2

20 Nov 2009

5340-12-360-0623
Angle Bracket

123600623
9417221014: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-12-317-2995
Retaining Strap

123172995
3229950115: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-303-6295
Resilient Mount

123036295
E1E 31S 77 AL: RNCC: 3 | RNVC: 2
VE31 HDS 77 AL: RNCC: 5 | RNVC: 2
VE31HDS77AL: RNCC: 5 | RNVC: 2

15 Apr 1985

5340-12-365-1210
Retaining Strap

123651210
1079950220: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-010-8535

5340-12-152-2702

5340-12-375-7942
Rod End Clevis

123757942
03-124390/0: RNCC: 3 | RNVC: 2
03-124390/0: RNCC: 5 | RNVC: 9

4 Jul 2008

5340-12-189-6734
Resilient Mount

121896734
52-59518-4: RNCC: 3 | RNVC: 2

12 Oct 1981

5340-12-348-0314
Mounting Bracket

123480314
58R059-84619-3: RNCC: 2 | RNVC: 2
58R059-84619-3: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-316-2893
Rod End Connector

123162893
6378735: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-352-0495
Access Cover

123520495
5502340133: RNCC: 3 | RNVC: 2
550 234 01 33: RNCC: 5 | RNVC: 2

10 Oct 2000

5340-12-044-1148

5340-12-143-6444

5340-12-344-0745
Mounting Plate

123440745
272.415.087: RNCC: 3 | RNVC: 2

8 Sep 1997

5340-12-701-2575
Mounting Bracket

127012575
VG95211-ML-127012575: RNCC: 2 | RNVC: 2
5.12.4203.2114.98: RNCC: 3 | RNVC: 2
0501403266799: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-365-3905
Mounting Bracket

123653905
2500278-190000.081.0: RNCC: 2 | RNVC: 2
2500278-190000.081.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-319-0878
Lock-Release Lever

123190878
2654-332700.02: RNCC: 2 | RNVC: 2
2654-332700.02: RNCC: 3 | RNVC: 2
2654-332 700.02: RNCC: 5 | RNVC: 9
679-02080000.02: RNCC: 5 | RNVC: 9
679-02080000.02: RNCC: 5 | RNVC: 9

6 Sep 1989

5340-12-190-6303
Loop Clamp

121906303
PAN4231BCBC5218: RNCC: 3 | RNVC: 2

7 Dec 1981

5340-12-092-0939

5340-12-369-9631
Dust And Moisture Seal Protective Cap

123699631
SM 149460050: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-12-360-2038
Mounting Bracket

123602038
300.034.202: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-162-9898

5340-12-092-0868

5340-12-390-0331
Loop Clamp

123900331
81264500037: RNCC: 3 | RNVC: 2
81.26450-0037: RNCC: 5 | RNVC: 2
186417: RNCC: 5 | RNVC: 9

26 Sep 2012

5340-12-702-0223
Loop Clamp

127020223
VG95211-ML-127020223: RNCC: 2 | RNVC: 2
200N402-200: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-336-1659
Helical Compression Spring Seat

123361659
0406 1224: RNCC: 3 | RNVC: 2
4061224EE0178-08: RNCC: 5 | RNVC: 2
406-1224: RNCC: 5 | RNVC: 9

3 Nov 1994

5340-12-355-3848
Retaining Strap

123553848
DIN72571-1X6-ST-FE/ZN5: RNCC: 2 | RNVC: 2

9 Nov 2001

5340-12-388-3370
Buckle

123883370
0310-001: RNCC: 3 | RNVC: 2

13 Mar 2012

5340-12-328-9608
Electrical-Mechanical Equipment Post

123289608
C42080-A26-C75: RNCC: 2 | RNVC: 2
C42080-A26-C75: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-187-2556
Strap Hinge

121872556
3900054-810000.01: RNCC: 2 | RNVC: 2
3900054-810000-01: RNCC: 5 | RNVC: 9

23 Mar 1981

5340-12-349-7875
Mounting Plate

123497875
105-61701.32: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-300-8455
Mending Plate

123008455
4255221440: RNCC: 3 | RNVC: 2
425 522 14 40: RNCC: 5 | RNVC: 2

4 Sep 1984

5340-12-347-1806
Webbing Strap

123471806
54.1100.262.00: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-12-301-1291
Hinge Torsion Bar

123011291
54.0028.184.02: RNCC: 3 | RNVC: 2

22 Sep 1984

5340-12-394-5392
Veh Mounting Rail

123945392
4052063132033: RNCC: 3 | RNVC: 2
I012674: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-300-2036
Mending Plate

123002036
CF 491 632: RNCC: 3 | RNVC: 2
CF 491 632: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-330-7037
Access Cover

123307037
1478203: RNCC: 3 | RNVC: 2
EZ14782: RNCC: 5 | RNVC: 2

28 Jan 1993

5340-12-361-7333
Fuehrungs- Schiene

123617333
7802490502: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-12-361-4338
Retaining Strap

123614338
1504306: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-372-0618
Spring Tension Clip

123720618
015311757A: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-319-6091
Dust And Moisture Seal Protective Cap

123196091
03205800: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-12-353-4252
Clamping Catch

123534252
2995.24.34: RNCC: 2 | RNVC: 2
2995.24.34: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-386-4162
Nut And Bolt Locking Plate

123864162
X52314100032: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-353-5196
Rod End Clevis

123535196
CBD45404P03: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-12-358-9618
Mounting Plate

123589618
2300074-4146.05: RNCC: 2 | RNVC: 2
2300074-4146.05: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-010-2349

5340-12-351-6763
Double Angle Bracket

123516763
2300387-700205.000: RNCC: 2 | RNVC: 2
9906439: RNCC: 3 | RNVC: 2
2300387-700205.000: RNCC: 5 | RNVC: 9
9906439: RNCC: 5 | RNVC: 9

15 Aug 2000

5340-12-360-0429
Dust And Moisture Seal Protective Cap

123600429
9415250138: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-322-3345
Double Angle Bracket

123223345
4608890312: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-327-0644
Mounting Bracket

123270644
5803702-110100.00: RNCC: 2 | RNVC: 2
7802180285: RNCC: 3 | RNVC: 2
78021 80285: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-12-316-3691
Angle Bracket

123163691
160-01/82115: RNCC: 3 | RNVC: 2
160-01/82115: RNCC: 5 | RNVC: 9

12 Jan 1989

5340-12-338-9701
Resilient Mount

123389701
DIN95363-D10X10-NR55ST: RNCC: 2 | RNVC: 2
505001-M4X10.NR55.ST: RNCC: 5 | RNVC: 2
BB2.20-55SHORE: RNCC: 5 | RNVC: 9
VG95363-D10X10-M4X10-NR55ST: RNCC: 5 | RNVC: 9
VG95363-D10X10-NR55ST: RNCC: 5 | RNVC: 9
BB2-20: RNCC: 5 | RNVC: 9

20 Sep 1995

5340-12-190-7169
Angle Bracket

121907169
NO PRIMARY REF 12-190-7169: RNCC: 3 | RNVC: 2
7512134992: RNCC: 5 | RNVC: 9
7512 134992: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-182-5772
Loop Clamp

121825772
024-0030-014-020: RNCC: 3 | RNVC: 2
024 000 001 018: RNCC: 3 | RNVC: 2
0240030014020: RNCC: 5 | RNVC: 2
50152807: RNCC: 5 | RNVC: 2
024000001018: RNCC: 5 | RNVC: 2
0003380463: RNCC: 5 | RNVC: 2

12 Feb 1980

5340-12-328-4800
Dust And Moisture Seal Protective Cap

123284800
12765: RNCC: 3 | RNVC: 2
0069976981: RNCC: 5 | RNVC: 2
02-2448: RNCC: 5 | RNVC: 2

22 May 1992

5340-12-386-3454
Mounting Plate

123863454
2481-393300.013.0: RNCC: 2 | RNVC: 2
2481-393300.013.0: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-12-175-2669
Retaining Strap

121752669
WW410216B: RNCC: 3 | RNVC: 2
WW410216B: RNCC: 5 | RNVC: 2
WW410216B: RNCC: 5 | RNVC: 2
WW 410 216 B: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-171-9498
Spacing Threaded Standoff

121719498
PAN6548: RNCC: 3 | RNVC: 2

5 Dec 1977

5340-12-364-2431
Access Cover

123642431
4052620122: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-313-3365
Mending Plate

123133365
5801699-8410.00: RNCC: 2 | RNVC: 2
5801699-8410.00: RNCC: 3 | RNVC: 2
5801699-8410.00: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-348-5907
Mechanic Equipment Hardware Kit

123485907
837 625 44: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-12-325-8052
Mounting Plate

123258052
3874291340: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-12-345-9896
Mounting Bracket

123459896
1AJ0044: RNCC: 3 | RNVC: 2
1AJ0044: RNCC: 3 | RNVC: 2

27 May 1998

5340-12-328-9757
Access Cover

123289757
173603: RNCC: 2 | RNVC: 2
173603: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-187-2208
Nonmetallic Bumper

121872208
81960200048: RNCC: 3 | RNVC: 2
5000253893: RNCC: 5 | RNVC: 2
5000253893: RNCC: 5 | RNVC: 9

11 Mar 1981

5340-12-387-5294
Mounting Bracket

123875294
S345M1006101: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-12-312-1623
Angle Bracket

123121623
105-45041W28: RNCC: 3 | RNVC: 2

27 Nov 1987

5340-12-366-9714
Mounting Bracket

123669714
S537M3019101: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-044-3832

5340-12-379-9377
Angle Bracket

123799377
1558086: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-333-1070
Mounting Plate

123331070
M412126: RNCC: 3 | RNVC: 9

29 Oct 1993

5340-12-305-6154
Manual Control Handle

123056154
0000464850: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-183-6865
Retaining Band

121836865
42010361: RNCC: 3 | RNVC: 2
42010361EZ5044-72: RNCC: 5 | RNVC: 2

13 May 1980

5340-12-385-0850
Nut And Bolt Retainer

123850850
M2747004020000: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-12-093-7124

5340-12-376-2342
Section Block Clamp

123762342
5559951768: RNCC: 3 | RNVC: 2
5559951768: RNCC: 5 | RNVC: 2

29 Aug 2008

5340-12-321-3175
Loop Clamp

123213175
62640143: RNCC: 3 | RNVC: 2
2640/143: RNCC: 5 | RNVC: 9

4 May 1990

5340-12-176-6269
Spring Tension Clip

121766269
5800820-149-005: RNCC: 3 | RNVC: 2
5800820-149.005: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-358-9629
Mounting Plate

123589629
2300392-188910.001: RNCC: 2 | RNVC: 2
2300392-188910.001: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-131-5616
Turnbuckle

121315616
DIN82004-B3-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-B3-ZN: RNCC: 3 | RNVC: 2
B3DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-385-5549
Lock-Release Lever

123855549
233869: RNCC: 3 | RNVC: 2
93434-110.02: RNCC: 5 | RNVC: 2

15 Jun 2011

5340-12-330-7800
Turnbuckle Body

123307800
1702000432: RNCC: 3 | RNVC: 2
4127-01-00-16: RNCC: 5 | RNVC: 2

9 Feb 1993

5340-12-171-8809
Webbing Strap

121718809
81623056015: RNCC: 3 | RNVC: 2
81.62305-6015: RNCC: 5 | RNVC: 2
108180: RNCC: 5 | RNVC: 2

23 Nov 1977

5340-12-388-0377
Mit Klemmverbinder

123880377
GN 272-40-AV-SW: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-12-383-8121
Angle Bracket

123838121
601241-201100.01: RNCC: 2 | RNVC: 2
601241-201100.01: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-12-344-8640
Mounting Bracket

123448640
5803514-218110.00: RNCC: 2 | RNVC: 2
55.0205.640.00: RNCC: 3 | RNVC: 2
5803514-218110.00: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-351-2683
Multiple Angle Bracket

123512683
23290-184410.001: RNCC: 2 | RNVC: 2
9872322: RNCC: 3 | RNVC: 2
23290-184410.001: RNCC: 5 | RNVC: 9
9872322: RNCC: 5 | RNVC: 9

7 Jul 2000

5340-12-340-4112
Retaining Strap

123404112
ZY65X5: RNCC: 3 | RNVC: 2
PL E 7/2 P-32: RNCC: 5 | RNVC: 2
ZY65X5 (IDVCS065-117.895): RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-168-3010
Loop Clamp

121683010
DIN3016-1-A1-20X15-W1-2: RNCC: 2 | RNVC: 2
RS1.20/15: RNCC: 3 | RNVC: 2
DIN3016-A1-20X15-W1-2: RNCC: 3 | RNVC: 2
RS1100-20-15: RNCC: 5 | RNVC: 2
RS1100.20/15: RNCC: 5 | RNVC: 2
VG95931-A20X15-W1: RNCC: 5 | RNVC: 9
VG95931A20X15W1: RNCC: 5 | RNVC: 9
DIN3016-A1-20X15-W1-2: RNCC: 5 | RNVC: 9
4110015020: RNCC: 5 | RNVC: 9

7 Mar 1977

5340-12-338-5551
Protection Bellows

123385551
V6-76: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-12-338-6921
Butt Hinge

123386921
463-223011.004: RNCC: 3 | RNVC: 9
9896440: RNCC: 5 | RNVC: 9

16 Aug 1995

5340-12-340-2216
Double Angle Bracket

123402216
9897654: RNCC: 3 | RNVC: 9
463-151320.002: RNCC: 5 | RNVC: 9

15 Mar 1996

5340-12-702-8246
Lock-Release Lever

127028246
50-40700630055: RNCC: 2 | RNVC: 2
1385722202001673: RNCC: 5 | RNVC: 2

22 Dec 1995

5340-12-314-9023
Strap Fastener Loop

123149023
160-26283-02: RNCC: 3 | RNVC: 2
160-26283-02: RNCC: 5 | RNVC: 9

25 Aug 1988

5340-12-386-5775
Handwheel

123865775
4000000906: RNCC: 3 | RNVC: 2
81.97001-6111: RNCC: 5 | RNVC: 2
81970016111: RNCC: 5 | RNVC: 2

13 Sep 2011

5340-12-370-4155
Helical Compression Spring Seat

123704155
4373220087: RNCC: 3 | RNVC: 2

6 Nov 2006

5340-12-392-4952
Access Cover

123924952
7187368: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-12-360-2103
Mounting Bracket

123602103
88626800011: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-198-4071
Angle Bracket

121984071
27 0318 412: RNCC: 2 | RNVC: 2
9837732: RNCC: 3 | RNVC: 9
27 0318 412: RNCC: 5 | RNVC: 2
27 0318 412: RNCC: 5 | RNVC: 9
270318412: RNCC: 5 | RNVC: 9

25 Jan 1984

5340-12-378-3624
Angle Bracket

123783624
41040890: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-149-7131
Retaining Clip

121497131
R20759: RNCC: 3 | RNVC: 2
R20759: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-126-6677

5340-12-330-0085
Loop Clamp

123300085
LN9490BM22: RNCC: 2 | RNVC: 2

21 Oct 1992

5340-12-333-9117
Angle Bracket

123339117
3226110112: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-12-319-9861
Mounting Bracket

123199861
014587: RNCC: 3 | RNVC: 2

24 Nov 1989

5340-12-387-8547
Mounting Bracket

123878547
7093771: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-385-4328
Cable Retractor

123854328
1002828: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-352-7367
Support Hook

123527367
14020601: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-12-195-2214
Shimmy Damper

121952214
5324010010: RNCC: 3 | RNVC: 2
5324011120: RNCC: 5 | RNVC: 2
5324010010: RNCC: 5 | RNVC: 2

26 Jan 1983

5340-12-328-0013
Lock-Release Lever

123280013
5803578-137420.02: RNCC: 2 | RNVC: 2
5803578-137420.02: RNCC: 3 | RNVC: 2

27 Mar 1992

5340-12-174-9312
Retaining Strap

121749312
52-0164-030-00: RNCC: 3 | RNVC: 2

9 Aug 1978

5340-12-317-3209
Mounting Plate

123173209
4900064-41212.003: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-188-5152
Sicherheits Schlosz

121885152
225.08.603: RNCC: 3 | RNVC: 2
225-08-603: RNCC: 5 | RNVC: 2

15 Jul 1981

5340-12-333-2015
Butt Hinge Leaf

123332015
00098389480: RNCC: 3 | RNVC: 9
328-182600.006: RNCC: 5 | RNVC: 9
9838948: RNCC: 5 | RNVC: 9

9 Nov 1993

5340-12-195-8070
Double Angle Bracket

121958070
160-32133: RNCC: 3 | RNVC: 2
160-32133: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-043-3443

5340-12-375-7370
Loop Clamp

123757370
DIN3016-1-E2-14-24X15-W1-2-NBR: RNCC: 2 | RNVC: 2

1 Jul 2008

5340-12-148-9184
Loop Clamp

121489184
DIN3016-1-E2-7-24X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.7-24/15: RNCC: 3 | RNVC: 2
DIN3016-E2-7-24X15-W1-2: RNCC: 3 | RNVC: 2
23176-060000-54-0: RNCC: 5 | RNVC: 2
4209102007: RNCC: 5 | RNVC: 2
RSGU7-24-15: RNCC: 5 | RNVC: 2
RSGU7-24/15: RNCC: 5 | RNVC: 2
DIN3016-E2-7-24X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-3281
Mending Plate

123193281
1000192-03 2 00000.02: RNCC: 2 | RNVC: 2
1000192-03 2 00000.02: RNCC: 3 | RNVC: 2
1000192-03 2 00000.02: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-356-8463
Angle Bracket

123568463
ED88-0100-01001-159: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-195-1337
Rod End Clevis

121951337
2300128-121182.000.0: RNCC: 2 | RNVC: 2
98.002-16.10.4: RNCC: 3 | RNVC: 2
2300128-121182.000.0: RNCC: 3 | RNVC: 2
2300128-121182.000.0: RNCC: 5 | RNVC: 2
2300128-121182.000.0: RNCC: 5 | RNVC: 9

17 Jan 1983

5340-12-323-5996
Loop Clamp

123235996
DIN3016-1-D2-5-5X12-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.2X5/12: RNCC: 3 | RNVC: 2
DIN3016-D2-5-5X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X5/12-W1: RNCC: 5 | RNVC: 2
DIN3016-D2-5-5X12-W1-2: RNCC: 5 | RNVC: 9

11 Dec 1990

5340-12-359-6585
Mounting Bracket

123596585
9485200441: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-12-313-6375
Access Cover

123136375
4062640212: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-132-1815

5340-12-359-3476
Manual Control Handle

123593476
5000-S0007: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-350-2915
Access Cover

123502915
5582032739: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-350-3636
Strap Hinge Leaf

123503636
105-62582.10: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-368-6937
Block Clamp

123686937
313637: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-12-382-3904
Handle Grip

123823904
24390.0524: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-337-8969
Mounting Bracket

123378969
461 840 02 14: RNCC: 3 | RNVC: 2
4618400214: RNCC: 5 | RNVC: 2

2 May 1995

5340-12-171-5545
Loop Clamp

121715545
LN29849-3: RNCC: 2 | RNVC: 2
204003106: RNCC: 3 | RNVC: 2
3LN29849: RNCC: 5 | RNVC: 2

24 Oct 1977

5340-12-374-7072
Mounting Bracket

123747072
705414303: RNCC: 3 | RNVC: 2

10 Mar 2008

5340-12-319-2566
Retaining Strap

123192566
45695: RNCC: 3 | RNVC: 2
14569580: RNCC: 3 | RNVC: 2

15 Sep 1989

5340-12-310-2677
Angle Bracket

123102677
2300088-411102.02: RNCC: 2 | RNVC: 2
9846702: RNCC: 3 | RNVC: 2
9846702: RNCC: 5 | RNVC: 9

30 Apr 1987

Load More Results