What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 94 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 94 of 178

5340-12-363-9859
Dust And Moisture Seal Boot

123639859
GSC-15-80760-00: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-703-3473
Mending Plate

127033473
VG95211-ML-127033473: RNCC: 2 | RNVC: 2
S32-6175-260B/02: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-178-9077
Electrical-Mechanical Equipment Post

121789077
VG95148B6XM3X20-NRST: RNCC: 2 | RNVC: 2
C121-A44-C42: RNCC: 2 | RNVC: 2
C121A44C42: RNCC: 3 | RNVC: 2
VG95148B6XM3X20-NRST: RNCC: 3 | RNVC: 2
C121-A44-C42: RNCC: 3 | RNVC: 2
C121A44C42: RNCC: 5 | RNVC: 2
C121-A44-C42: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-196-3873
Rod End Clevis

121963873
23303-160330.00: RNCC: 2 | RNVC: 2
619-27.00.400-02: RNCC: 3 | RNVC: 2
619-27-00-400-02: RNCC: 5 | RNVC: 2
23303-160330-00: RNCC: 5 | RNVC: 9

4 Jul 1983

5340-12-198-5444
Retaining Strap

121985444
23114-2405.43: RNCC: 2 | RNVC: 2
23114-2405.43: RNCC: 3 | RNVC: 2
23114-2405-43: RNCC: 5 | RNVC: 9
23114-2405-43: RNCC: 5 | RNVC: 9
23114-2405.43: RNCC: 5 | RNVC: 9

8 Feb 1984

5340-12-347-7107
Double Angle Bracket

123477107
212243-4002: RNCC: 3 | RNVC: 2
212243 4002: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-12-326-3356
Headless Straight Rod

123263356
2702098400: RNCC: 3 | RNVC: 2
27020-98400: RNCC: 5 | RNVC: 9

2 Sep 1991

5340-12-310-0056
Access Cover

123100056
E32-821040A00C: RNCC: 3 | RNVC: 2

27 Mar 1987

5340-12-026-9713

5340-12-328-9107
Multiple Angle Bracket

123289107
P.ZT01.1000.02: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-371-8068
Retaining Strap

123718068
050547: RNCC: 3 | RNVC: 2
050 547 F: RNCC: 5 | RNVC: 2

18 May 2007

5340-12-385-6783
Mounting Bracket

123856783
2903030002: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-386-3541
Loop Clamp

123863541
04110715030: RNCC: 3 | RNVC: 2
04110715000 TEIL 04110715030: RNCC: 5 | RNVC: 2
40004237: RNCC: 5 | RNVC: 2

26 Aug 2011

5340-12-198-3301
Spring Holder

121983301
3523170240: RNCC: 3 | RNVC: 2

16 Jan 1984

5340-12-377-1863
Mounting Bracket

123771863
8605059.1.101.00: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-361-9777
Retaining Band

123619777
1030014-971120.000.0: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-368-9807
Multiple Angle Bracket

123689807
7803221180: RNCC: 3 | RNVC: 2
1030010-721130.000.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-386-2297
Manual Control Lever

123862297
2481-391251.001.0: RNCC: 2 | RNVC: 2
2481-391251.001.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-141-7101
Retaining Strap

121417101
3131310003: RNCC: 3 | RNVC: 2
3 131 310 003: RNCC: 5 | RNVC: 2
1441310001: RNCC: 5 | RNVC: 2
FPBE1Z2X594: RNCC: 5 | RNVC: 2
162528101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-4197
Extension Drawer Slide

123554197
2.045.402.9: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-386-7801
Resilient Mount Plate

123867801
1030124-620516.000.0: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-12-317-2523
Mending Plate

123172523
CF 446 826 A: RNCC: 3 | RNVC: 2
CF 446 826 A: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-355-4354
Mechanical Stop

123554354
9153.006.4: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-385-9524
Access Cover

123859524
2500262-735114.000.0: RNCC: 3 | RNVC: 2

25 Jul 2011

5340-12-311-9407
Mending Plate

123119407
2507-350400.002.0: RNCC: 2 | RNVC: 2
2507-350400.002.0: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-12-325-9773
Manual Control Handle

123259773
3 9216-7: RNCC: 3 | RNVC: 2

26 Jul 1991

5340-12-382-0218
Webbing Strap

123820218
2 0098-557: RNCC: 3 | RNVC: 2

28 Apr 2010

5340-12-302-5513
Rigid Caster

123025513
03140845: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 14 0845: RNCC: 5 | RNVC: 2

11 Jan 1985

5340-12-197-9133
Bridge Clamp

121979133
CF 478 193 A: RNCC: 3 | RNVC: 2
CF 478 193 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-394-2473
Webbing Strap

123942473
4100097-986156.000.0: RNCC: 2 | RNVC: 2
4100097-986156.000.0: RNCC: 3 | RNVC: 2

14 Nov 2013

5340-12-197-9124
Angle Bracket

121979124
CF 482 390 A: RNCC: 3 | RNVC: 2
CF 482 390: RNCC: 5 | RNVC: 2
CF 482 390 A: RNCC: 5 | RNVC: 2
CF 482 390: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-197-9126
Angle Bracket

121979126
CF 478 234 B: RNCC: 3 | RNVC: 2
CF 478 234 B: RNCC: 5 | RNVC: 2
CF 478 234: RNCC: 5 | RNVC: 9
CF 478 234 A: RNCC: 5 | RNVC: 9
CF 478 234: RNCC: 5 | RNVC: 9
CF 478 234 A: RNCC: 5 | RNVC: 9

1 Dec 1983

5340-12-361-8291
Dust And Moisture Seal Protective Cover

123618291
570985808: RNCC: 3 | RNVC: 2
1 830 508 016: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-12-365-2304
Access Cover

123652304
2500267-730300.002.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-343-6897
Runner

123436897
13.4.110 F: RNCC: 3 | RNVC: 2
1270: RNCC: 5 | RNVC: 2
13.4.110: RNCC: 5 | RNVC: 2
1270: RNCC: 5 | RNVC: 9

15 Jul 1997

5340-12-341-1250
Flush Lock

123411250
260 5 123: RNCC: 3 | RNVC: 2
2605123: RNCC: 5 | RNVC: 2

31 Jul 1996

5340-12-372-9746
Mounting Plate

123729746
2300211-300310.000.0: RNCC: 2 | RNVC: 2
2300211-300310.000.0: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-12-381-1356
Loop Clamp

123811356
6.373-747.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-166-4000
Dust And Moisture Seal Protective Plug

121664000
TL4-178: RNCC: 3 | RNVC: 2
990680015: RNCC: 5 | RNVC: 9
BM20HN16438: RNCC: 5 | RNVC: 9
990680015: RNCC: 5 | RNVC: 9
BM20HN16438: RNCC: 5 | RNVC: 9

3 Sep 1976

5340-12-138-5449
Retaining Clip

121385449
C20136A4C804: RNCC: 3 | RNVC: 2
TFS72-53804: RNCC: 5 | RNVC: 2
TFS72-53804: RNCC: 5 | RNVC: 2
C20136-A4-C804: RNCC: 5 | RNVC: 2
TDRUCK4T804: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-343-4990
Retaining Strap

123434990
5092-231: RNCC: 3 | RNVC: 2
L07C.T14.55.00.00: RNCC: 5 | RNVC: 2
T14.55.00.000: RNCC: 5 | RNVC: 2
F300 0T 022 4962: RNCC: 6 | RNVC: 9

26 Jun 1997

5340-12-338-7275
Lock-Release Lever

123387275
6700017-205500.04: RNCC: 2 | RNVC: 2
6700017-205500.04: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-12-386-2998
Cushioning Pad

123862998
30-032-01-0117158: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-12-177-9009
Pipe Hanger

121779009
PAN4280-32: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-304-4519
Sealing Plug Assembly

123044519
MB700-160: RNCC: 3 | RNVC: 2

18 Jul 1985

5340-12-174-6604
Compression Cup

121746604
000 000 012 012: RNCC: 3 | RNVC: 2
89280004: RNCC: 5 | RNVC: 2
0003381463: RNCC: 5 | RNVC: 2
02966893: RNCC: 5 | RNVC: 2
2966893EY5065-10: RNCC: 5 | RNVC: 2
000000012012: RNCC: 5 | RNVC: 2

19 Jul 1978

5340-12-190-2595
Retaining Strap

121902595
1481303006: RNCC: 3 | RNVC: 2
1 481 303 006: RNCC: 5 | RNVC: 2
SVBE46G4X594: RNCC: 5 | RNVC: 2
SVBE46G4X594: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-151-6956
Resilient Mount

121516956
DIN95363-A25X15-NR45ST: RNCC: 2 | RNVC: 2
500026-M6X20.NR45.ST: RNCC: 5 | RNVC: 2
20292A/A-BSTN4590: RNCC: 5 | RNVC: 2
VG95363-A25X15-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-9840
Handwheel

123289840
234661-7: RNCC: 3 | RNVC: 2
8-0860-234661-7: RNCC: 5 | RNVC: 2
NKU91: RNCC: 5 | RNVC: 2
1540.7191: RNCC: 5 | RNVC: 2

4 Jul 1992

5340-12-346-4610
Retaining Strap

123464610
06671500111: RNCC: 3 | RNVC: 2
MAN217-28: RNCC: 5 | RNVC: 2

28 Jul 1998

5340-12-347-6144
Spring Tension Clip

123476144
30-002-01-0039779: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-12-343-7902
Mounting Plate

123437902
00-28-10-16-14: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-12-309-4965
Webbing Strap

123094965
5400029-500: RNCC: 2 | RNVC: 2
5400029-500: RNCC: 5 | RNVC: 9

28 Jan 1987

5340-12-163-2890
Double Angle Bracket

121632890
03015600: RNCC: 3 | RNVC: 2
03015600-274: RNCC: 5 | RNVC: 9
03015600.274: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-2041
Dust And Moisture Seal Boot

127002041
765-05-SB369K: RNCC: 2 | RNVC: 2

5 Nov 1991

5340-12-188-1296
Detent Plunger

121881296
24176-01: RNCC: 3 | RNVC: 2
24176-01: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-12-379-4374
Dust And Moisture Seal Protective Cap

123794374
64168901769051: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-322-6022
Ball Socket Seat

123226022
81417400004: RNCC: 3 | RNVC: 2
81.41740.0004: RNCC: 5 | RNVC: 2

5 Sep 1990

5340-12-377-3468
Loop Clamp

123773468
41288279: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-361-4747
Webbing Strap

123614747
M20966: RNCC: 3 | RNVC: 2
909143806: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-364-5724
Mounting Bracket

123645724
T257M2120101: RNCC: 2 | RNVC: 2
T257M2120101: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-12-393-7703
Pipe Bracket

123937703
1103350: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-387-8643
Loop Clamp

123878643
7093679: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-346-2711
Anschlagecke

123462711
10.0000.091: RNCC: 2 | RNVC: 2
10.0000.091: RNCC: 3 | RNVC: 2

6 Jul 1998

5340-12-354-4422
Nonmetallic Bumper

123544422
4NT2180759: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-390-0278
Loop Clamp

123900278
310760: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-326-2346
Nonmetallic Bumper

123262346
585235005: RNCC: 3 | RNVC: 2

20 Aug 1991

5340-12-303-6871
Electrical-Mechanical Equipment Post

123036871
7820400510: RNCC: 3 | RNVC: 2
78204 00510: RNCC: 5 | RNVC: 9

23 Apr 1985

5340-12-342-2803
Nonmetallic Bumper

123422803
1079870040: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-12-303-5788
Mending Plate

123035788
52.0261.532.00: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-184-2196
Angle Bracket

121842196
5801357-1100.04: RNCC: 2 | RNVC: 2
5801357-1100.04: RNCC: 3 | RNVC: 2
5801357-1100-04: RNCC: 5 | RNVC: 2
5801357-1100-04: RNCC: 5 | RNVC: 9
5801357-1100-04: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-318-1666
Mounting Plate

123181666
C42315-A62-C23: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-317-8150
Resilient Mount

123178150
HB44-CBM15: RNCC: 3 | RNVC: 2
080A13000: RNCC: 5 | RNVC: 2
HB44-CBM15: RNCC: 5 | RNVC: 9

17 May 1989

5340-12-360-3726
Dust And Moisture Seal Protective Cap

123603726
0009625054: RNCC: 3 | RNVC: 2
0009625054: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-350-8446
Mounting Plate

123508446
105-911547: RNCC: 3 | RNVC: 2

29 May 2000

5340-12-374-7303
Retaining Strap

123747303
705410333: RNCC: 3 | RNVC: 2

12 Mar 2008

5340-12-310-7499
Door Handle

123107499
628961: RNCC: 3 | RNVC: 2
00.391.000: RNCC: 5 | RNVC: 2
0628961: RNCC: 5 | RNVC: 2
628961: RNCC: 5 | RNVC: 2
550061: RNCC: 5 | RNVC: 2

26 Jun 1987

5340-12-133-2964

5340-12-190-3015
Webbing Strap

121903015
23114-4179.02: RNCC: 2 | RNVC: 2
23114-4179.02: RNCC: 3 | RNVC: 2
23114-4179-02: RNCC: 5 | RNVC: 9
23114-4179.02: RNCC: 5 | RNVC: 9
23114-4179-02: RNCC: 5 | RNVC: 9
23114-4179.02: RNCC: 5 | RNVC: 9
000-E1-25X2,5X500-BW-RAL6031: RNCC: 6 | RNVC: 9

17 Nov 1981

5340-12-363-8486
Double Angle Bracket

123638486
J32320323-401: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-302-1671
Spring Tension Clip

123021671
601-09.01: RNCC: 3 | RNVC: 2
601-09-01: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-179-1304
Dust And Moisture Seal Protective Cap

121791304
2300061-241000.003: RNCC: 2 | RNVC: 2
2300061-241000.003: RNCC: 3 | RNVC: 2
2300061-241000.003: RNCC: 3 | RNVC: 2
2300061-241000-003: RNCC: 5 | RNVC: 9
2300061-241000.003: RNCC: 5 | RNVC: 9

8 Jun 1979

5340-12-308-7070
Angle Bracket

123087070
P-295435-042: RNCC: 3 | RNVC: 2
P295435-042: RNCC: 5 | RNVC: 2

10 Nov 1986

5340-12-170-8743
Butt Hinge

121708743
DIN7954-B50-ST-BK: RNCC: 2 | RNVC: 2
B50DIN7954: RNCC: 5 | RNVC: 2

17 Aug 1977

5340-12-354-4718
Hand Crank

123544718
J0433823D311-000A0: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-12-194-3861
Angle Bracket

121943861
62.6637.150.05-A001: RNCC: 3 | RNVC: 2
762824: RNCC: 5 | RNVC: 2
62-6637-150-05A001: RNCC: 5 | RNVC: 9

28 Oct 1982

5340-12-340-0594
Bail Handle

123400594
ZN4260-800: RNCC: 3 | RNVC: 2
8499970044: RNCC: 5 | RNVC: 2

22 Feb 1996

5340-12-349-7764
Snap-In Threaded Standoff

123497764
12 31 1 340 933: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-177-3167
Nonmetallic Bumper

121773167
CF 446 603: RNCC: 2 | RNVC: 2
CF 446 603: RNCC: 3 | RNVC: 2
CF 446 603: RNCC: 3 | RNVC: 2
SCHEIBE D 20,0MMX S 6,0MM.CR74: RNCC: 5 | RNVC: 2
CF 446 603: RNCC: 5 | RNVC: 2
CF446603: RNCC: 5 | RNVC: 2
CF446603: RNCC: 5 | RNVC: 2
CF446603: RNCC: 5 | RNVC: 2
CF 446 603: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-191-3356
Pad Eye

121913356
4602660240: RNCC: 3 | RNVC: 2
460 266 02 40: RNCC: 5 | RNVC: 2
460 266 02 40: RNCC: 5 | RNVC: 2
721 1 13 018 1: RNCC: 5 | RNVC: 9

26 Jan 1982

5340-12-319-4337
Mounting Bracket

123194337
2782-360100.003.0: RNCC: 2 | RNVC: 2
2782-360100.003.0: RNCC: 3 | RNVC: 2

2 Oct 1989

5340-12-307-9967
Compression Cup

123079967
0061.1578.0: RNCC: 3 | RNVC: 2

18 Aug 1986

5340-12-330-7460
Clamping Catch

123307460
068129797B: RNCC: 3 | RNVC: 2
068 129 797 B: RNCC: 5 | RNVC: 2
068129797B: RNCC: 5 | RNVC: 2

3 Feb 1993

5340-12-322-9457
Dust And Moisture Seal Protective Cap

123229457
1000121-1.1: RNCC: 2 | RNVC: 2
1000121-1.1: RNCC: 3 | RNVC: 2
1000121-1.1: RNCC: 5 | RNVC: 9

10 Oct 1990

5340-12-323-0946
Lock-Release Lever

123230946
1202 9809: RNCC: 3 | RNVC: 2
3.603.0.640.001.4: RNCC: 5 | RNVC: 2

23 Oct 1990

5340-12-392-2926
Cushioning Pad

123922926
7000112: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-361-6493
Access Cover

123616493
172018100201: RNCC: 3 | RNVC: 2
172.018.100.201.000: RNCC: 5 | RNVC: 9

29 Oct 2003

5340-12-359-1939
Mounting Bracket

123591939
9414750540: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-350-1723
Double Angle Bracket

123501723
203428: RNCC: 3 | RNVC: 2
203428: RNCC: 5 | RNVC: 2

23 Feb 2000

5340-12-316-6294
Butt Hinge

123166294
5800046-9392.00: RNCC: 2 | RNVC: 2
5800046-9392.00: RNCC: 3 | RNVC: 2
5800046-9392.00: RNCC: 5 | RNVC: 9
5800046-9392.00: RNCC: 5 | RNVC: 9

30 Jan 1989

5340-12-352-7135
Access Cover

123527135
64416355: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-326-5526
Angle Bracket

123265526
8440.1006: RNCC: 3 | RNVC: 2

7 Oct 1991

5340-12-310-5041
Angle Bracket

123105041
6204925441: RNCC: 3 | RNVC: 2

27 May 1987

5340-12-371-4716
Hasp Staple

123714716
64110307: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-12-354-3634
Mounting Plate

123543634
0008360011: RNCC: 3 | RNVC: 2
A0008360011: RNCC: 5 | RNVC: 2
A0008360011: RNCC: 5 | RNVC: 2
A 000 836 00 11: RNCC: 5 | RNVC: 9

4 Jul 2001

5340-12-341-2236
Clamping Catch

123412236
4608601169: RNCC: 3 | RNVC: 2
721 1 83 541 0: RNCC: 5 | RNVC: 9

10 Aug 1996

5340-12-323-5112
Catch Strike

123235112
00 7203 322: RNCC: 3 | RNVC: 2
01.07022-3400.003.4: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-302-7867
Angle Bracket

123027867
CF 491 522 A: RNCC: 3 | RNVC: 2
CF 491 522 A: RNCC: 5 | RNVC: 2
CF 491 522: RNCC: 5 | RNVC: 9
CF 491 522: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-352-4974
Mounting Bracket

123524974
521910-970170.001.0: RNCC: 2 | RNVC: 2
521910-970170.001.0: RNCC: 3 | RNVC: 2
1520479: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-701-7879
Mounting Bracket

127017879
5.12.7805.1090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-166-6521
Helical Compression Spring Retainer

121666521
WW407126A: RNCC: 3 | RNVC: 9
WW 407 126 A: RNCC: 5 | RNVC: 2
WW407126A: RNCC: 5 | RNVC: 2
WW 407 126 A: RNCC: 5 | RNVC: 9

30 Sep 1976

5340-12-309-0632
Furniture Leg Tip

123090632
7716.0: RNCC: 3 | RNVC: 2

11 Dec 1986

5340-12-191-4624
Shimmy Damper

121914624
1152680650: RNCC: 3 | RNVC: 2
721 1 20 020 2: RNCC: 5 | RNVC: 9

4 Feb 1982

5340-12-148-9920
Handwheel

121489920
NO PRIMARY REF 12-148-9920: RNCC: 3 | RNVC: 2
160X14DIN951A3GE: RNCC: 5 | RNVC: 9
160X14DIN951A3GG: RNCC: 5 | RNVC: 9
C160X14DIN951GG: RNCC: 5 | RNVC: 9
DIN951-C160X14-GG: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-7761
Resilient Mount Adapter

123167761
S05-101082: RNCC: 3 | RNVC: 2

10 Feb 1989

5340-12-309-1121
Webbing Strap

123091121
2500045-5015.00: RNCC: 2 | RNVC: 2
2500045-5015.00: RNCC: 3 | RNVC: 2
9864027: RNCC: 5 | RNVC: 9
9864027: RNCC: 5 | RNVC: 9
000-C2-20X1,2X625-PE-RAL6031: RNCC: 6 | RNVC: 9

15 Dec 1986

5340-12-372-8926
Handwheel

123728926
4080-022: RNCC: 3 | RNVC: 2

3 Sep 2007

5340-12-368-3530
Mounting Bracket

123683530
13570-2513-02-06-0034: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-12-171-2752
Dust And Moisture Seal Protective Cap

121712752
8977535504: RNCC: 3 | RNVC: 2
81.96410-0293: RNCC: 5 | RNVC: 2
81964100293: RNCC: 5 | RNVC: 2
1695959: RNCC: 5 | RNVC: 2
8475082: RNCC: 5 | RNVC: 2
42483673: RNCC: 5 | RNVC: 2
42483673EY5072-28: RNCC: 5 | RNVC: 2
0606616: RNCC: 5 | RNVC: 2
606616: RNCC: 5 | RNVC: 9

26 Sep 1977

5340-12-304-7092
Nonmetallic Solid Wheel

123047092
20-6510-117: RNCC: 3 | RNVC: 2

14 Aug 1985

5340-12-195-2147
Manual Control Handle

121952147
910-191-203: RNCC: 3 | RNVC: 9

26 Jan 1983

5340-12-351-6211
Mounting Bracket

123516211
J28230072-402: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-12-381-2957
Mounting Plate

123812957
424-04-IBU4: RNCC: 3 | RNVC: 2
4250473100516: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-161-2572
Retaining Clip

121612572
160-73210-01: RNCC: 3 | RNVC: 2
160-73210-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-386-5067
Access Cover

123865067
120D182042.000.0: RNCC: 2 | RNVC: 2
120D182042.000.0: RNCC: 3 | RNVC: 2
1792898: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-337-9948
Double Angle Bracket

123379948
4667801: RNCC: 3 | RNVC: 2
EZ46678: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-161-1933
Loop Clamp

121611933
160-75120-01: RNCC: 3 | RNVC: 2
160-75120-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-121-7604
Nonmetallic Bumper

121217604
VG95092B16X6X25X3X9-PUR55: RNCC: 2 | RNVC: 2
VG95092B16X6X25X3X9-PUR55: RNCC: 3 | RNVC: 2
2217-56255-00: RNCC: 3 | RNVC: 9
22175625500000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-335-3456
Mending Plate

123353456
6700018-203500.01: RNCC: 2 | RNVC: 2
6700018-203500.01: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-702-1560
Mounting Bracket

127021560
VG95211-ML-127021560: RNCC: 2 | RNVC: 2
30.6113.195: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-197-4506
Metal Runner

121974506
30819-088: RNCC: 3 | RNVC: 2
30819-088: RNCC: 5 | RNVC: 2

24 Oct 1983

5340-12-700-8544
Loop Clamp

127008544
VG95211-ML-127008544: RNCC: 2 | RNVC: 2
155N1119-623: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-151-6309
Barrel Bolt

121516309
7722-20PR: RNCC: 3 | RNVC: 2
61014-72-77: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-4837
Mounting Plate

123874837
550131-0000.01: RNCC: 3 | RNVC: 2

28 Dec 2011

5340-12-375-8671
Dust And Moisture Seal Protective Cap-Plug

123758671
16 293.520: RNCC: 3 | RNVC: 2
PS-913277: RNCC: 5 | RNVC: 2

15 Jul 2008

5340-12-302-8659
Angle Bracket

123028659
2300088-311101.00: RNCC: 2 | RNVC: 2
2300088-311101.00: RNCC: 3 | RNVC: 2

5 Feb 1985

5340-12-338-8170
Nonmetallic Bumper

123388170
08 52 719: RNCC: 3 | RNVC: 2
852719: RNCC: 5 | RNVC: 2
90128194: RNCC: 5 | RNVC: 2

28 Aug 1995

5340-12-316-3513
Detent Plunger

123163513
6375445: RNCC: 3 | RNVC: 2

12 Jan 1989

5340-12-316-2911
Rod End Clevis

123162911
6372008: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-381-6912
Access Cover

123816912
314103006H: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-12-373-4011
Retaining Strap

123734011
93805418: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-12-196-3841
Mending Plate

121963841
66.3851.550.01-A001: RNCC: 3 | RNVC: 2
121673: RNCC: 5 | RNVC: 2

4 Jul 1983

5340-12-358-0154
Flush Lock

123580154
0007400435: RNCC: 3 | RNVC: 2
000 740 04 35: RNCC: 5 | RNVC: 2

2 Sep 2002

5340-12-352-7148
Access Cover

123527148
64416376: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-011-2092

5340-12-317-8084
Resilient Mount

123178084
DIN95363-A40X40-CR55ST: RNCC: 2 | RNVC: 2
331052648: RNCC: 5 | RNVC: 2
81100-40X40-M8X25.CR55.ST: RNCC: 5 | RNVC: 2
VG95363-A40X40-CR55ST: RNCC: 5 | RNVC: 9

17 May 1989

5340-12-361-3175
Dust And Moisture Seal Protective Cover

123613175
597.51-240000-000: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-12-305-4403
Clamping Catch

123054403
DIN3133-D70-G18X19ZN5: RNCC: 2 | RNVC: 2

6 Nov 1985

5340-12-339-1074
Mounting Bracket

123391074
6000010-1000.00: RNCC: 2 | RNVC: 2
6000010-1000.00: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-12-180-3121
Spring Tension Clip

121803121
11922: RNCC: 3 | RNVC: 2
N92034L1: RNCC: 5 | RNVC: 2
01-1518: RNCC: 5 | RNVC: 2
01236765: RNCC: 5 | RNVC: 2
1236765EE8928-80: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-365-0209
Track Stop

123650209
5160-311160A01B: RNCC: 2 | RNVC: 2
5160-311160A01B: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-349-7184
Mounting Bracket

123497184
5803568-201510.00: RNCC: 2 | RNVC: 2
5803568-201510.00: RNCC: 3 | RNVC: 2

29 Dec 1999

5340-12-166-6063
Helical Compression Spring Retainer

121666063
WW405755E: RNCC: 3 | RNVC: 9
WW405755E: RNCC: 5 | RNVC: 2
WW 405 755 E: RNCC: 5 | RNVC: 2
WW 405 755 E: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-340-7556
Nonmetallic Bumper

123407556
1928300048: RNCC: 3 | RNVC: 2
1 928 300 048: RNCC: 5 | RNVC: 2
1 928.300.048: RNCC: 5 | RNVC: 2

5 Jun 1996

5340-12-340-0706
Mending Plate

123400706
1216 1531: RNCC: 3 | RNVC: 2
6.232.0.650.027.4: RNCC: 5 | RNVC: 9

23 Feb 1996

5340-12-358-6958
Angle Bracket

123586958
2500262-733000.017.0: RNCC: 2 | RNVC: 2
2500262-733000.017.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-342-6209
Mounting Plate

123426209
6 223 002 222: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-338-8441
T Bracket

123388441
52.3137.005.03: RNCC: 3 | RNVC: 2

30 Aug 1995

5340-12-371-6734
Snap Hook

123716734
00508-I-05: RNCC: 3 | RNVC: 9

4 May 2007

5340-12-387-4336
Manual Control Handle

123874336
3161766: RNCC: 3 | RNVC: 2
8.316.001.004.01.04: RNCC: 5 | RNVC: 2

15 Dec 2011

5340-12-139-3976
Loop Clamp

121393976
1671312004: RNCC: 3 | RNVC: 2
WBE50Z5X: RNCC: 5 | RNVC: 2
1671312004: RNCC: 5 | RNVC: 9
8.716: RNCC: 5 | RNVC: 9
WBE50Z5X: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-136-8239

5340-12-314-6564
Access Cover

123146564
272.336 729: RNCC: 2 | RNVC: 2
272.336.729: RNCC: 3 | RNVC: 2
272.336 729: RNCC: 5 | RNVC: 9

27 Jul 1988

5340-12-316-9649
Detent Plunger

123169649
3212620674: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-373-7349
Mounting Bracket

123737349
T947M4005216: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-12-357-9158
Dust And Moisture Seal Protective Cover

123579158
2300042-255650.000: RNCC: 2 | RNVC: 2
2300042-255650.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-371-0376
Access Cover

123710376
E0006960001: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-12-011-4441

5340-12-165-0758

5340-12-300-6621
Bow Handle

123006621
1000091-3120: RNCC: 2 | RNVC: 2
1000091-3120: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-329-0060
Loop Clamp

123290060
2300232-827100.002.0: RNCC: 2 | RNVC: 2
2300232-827100.002.0: RNCC: 3 | RNVC: 2

8 Jul 1992

5340-12-386-2383
Angle Bracket

123862383
2481-390107.001.0: RNCC: 2 | RNVC: 2
2481-390107.001.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-388-1844
Section Block Clamp

123881844
1030124-206400.005.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-358-6968
Access Cover

123586968
2500262-394230.003.0: RNCC: 2 | RNVC: 2
2500262-394230.003.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-338-9723
Dust And Moisture Seal Protective Plug

123389723
700M16X1,5 RAL9005: RNCC: 3 | RNVC: 2
GPN700M16X1,5 SCHWARZ: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-12-194-4106
V Halte- Schlaufe

5340-12-309-8882
Support Hook

123098882
E32-821060A03G: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-12-165-6973
Pad Eye

121656973
20-4250-003: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-193-5661
Rod End Clevis

121935661
NO PRIMARY REF 12-193-5661: RNCC: 3 | RNVC: 2
10-106: RNCC: 5 | RNVC: 9
10.106: RNCC: 5 | RNVC: 9
DIN71751-A16X32-A3P: RNCC: 5 | RNVC: 9
DIN71751-A16X32-A3P: RNCC: 5 | RNVC: 9

4 Aug 1982

5340-12-308-6120
Casement Fastener

123086120
V965L23-2R1AG: RNCC: 3 | RNVC: 2
V65L23-2R1AB: RNCC: 5 | RNVC: 2

29 Oct 1986

5340-12-164-9177
Angle Bracket

121649177
681-25160-02: RNCC: 3 | RNVC: 2
681-25160-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-3430
Retaining Strap

123503430
105-61701.49: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-300-6671
Double Angle Bracket

123006671
4355410611: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-316-4254
Headless Grooved Rod

123164254
22012.0.04.000.05: RNCC: 2 | RNVC: 2
22012.0.04.000.05: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-339-1066
Key Blank

123391066
12 03 14 9: RNCC: 3 | RNVC: 2
1203149: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-12-325-7992
Nonmetallic Bumper

123257992
5801984-980600.001.0: RNCC: 2 | RNVC: 2
PLATTE25X5X540MM.MOOSGUMMI 60SHA: RNCC: 3 | RNVC: 2
5801984-980600.001.0: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-388-6791
Mounting Bracket

123886791
10199-188000.001.0: RNCC: 2 | RNVC: 2
10199-188000.001.0: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-12-356-3690
Hand Crank

123563690
1350.6,5.342.00: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-352-4970
Mounting Bracket

123524970
521910-970133.000.0: RNCC: 2 | RNVC: 2
521910-970133.000.0: RNCC: 3 | RNVC: 2
1271551: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-335-3294
Metallic Bumper

123353294
1421030004: RNCC: 3 | RNVC: 2
1 421 030 004: RNCC: 5 | RNVC: 2

10 Aug 1994

5340-12-309-2989
Double Angle Bracket

123092989
0A846.91-42-03-00-001: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-12-387-5935
Mounting Plate

123875935
V6555-03402-043: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-329-1976
Dust And Moisture Seal Protective Cap

123291976
307.161-10412.04: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-12-317-6531
Resilient Mount

123176531
C249-A11-B65: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-12-308-9630
Retaining Strap

123089630
2859070322: RNCC: 3 | RNVC: 2

2 Dec 1986

5340-12-316-5973
Access Cover

123165973
6380494: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-322-2039
Mounting Bracket

123222039
40 0176 444: RNCC: 2 | RNVC: 2
40 0176 444: RNCC: 3 | RNVC: 2
40 0176 444: RNCC: 5 | RNVC: 9

1 Aug 1990

5340-12-310-0598
Sliding Door Hanger

123100598
HELM424: RNCC: 3 | RNVC: 2
HELM424: RNCC: 5 | RNVC: 2
HELM424: RNCC: 5 | RNVC: 9

2 Apr 1987

5340-12-380-5681
Snap-In Plain Standoff

123805681
HP3260BWSS25: RNCC: 3 | RNVC: 2

10 Nov 2009

5340-12-010-5332

5340-12-027-6890

5340-12-382-6703
Bumper

123826703
NR. 7518: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-12-313-8651
Double Angle Bracket

123138651
4355440338: RNCC: 3 | RNVC: 2
435 544 03 38: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-381-8199
Retaining Band

123818199
MC 7715: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-12-302-0305
Angle Bracket

123020305
C42080-A32-B27: RNCC: 2 | RNVC: 2
C42080-A32-B27: RNCC: 3 | RNVC: 2
C42080-A32-C86: RNCC: 5 | RNVC: 9

28 Nov 1984

5340-12-316-5318
Butt Hinge

123165318
5800044-9492.00: RNCC: 2 | RNVC: 2
5800044-9492.00: RNCC: 3 | RNVC: 2
5800044-9492.00: RNCC: 5 | RNVC: 9

24 Jan 1989

5340-12-373-0637
Angle Bracket

123730637
DWAB350: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-12-380-4319
Retaining Strap

123804319
105-45028.59: RNCC: 3 | RNVC: 2

29 Oct 2009

5340-12-333-1177
Clamping Catch

123331177
2 000 028: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-12-325-7984
Nonmetallic Bumper

123257984
5801984-982100.004.0: RNCC: 2 | RNVC: 2
PLATTE320X150X6MM.MOOSGUMMI 35SH: RNCC: 3 | RNVC: 2
5801984-982100.004.0: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-344-2376
Access Cover

123442376
2500255-531400.003.0: RNCC: 2 | RNVC: 2
2500255-531400.003.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-330-7459
Plug Button

123307459
036121324B: RNCC: 3 | RNVC: 2
036 121 324 B: RNCC: 5 | RNVC: 2
036121324B: RNCC: 5 | RNVC: 2

3 Feb 1993

5340-12-180-9391
Support Hook

121809391
24027351: RNCC: 3 | RNVC: 2
24027351: RNCC: 5 | RNVC: 9
W 3654 206 Q: RNCC: 5 | RNVC: 9
W3654206Q: RNCC: 5 | RNVC: 9

12 Oct 1979

5340-12-319-6540
Mending Plate

123196540
6200.062.1: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-328-2895
Extension Drawer Slide

123282895
1.350.411.9: RNCC: 3 | RNVC: 2

5 May 1992

5340-12-371-4641
Loop Clamp

123714641
6744911541: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-12-335-9564
Manual Control Lever

123359564
YFV 4RA 0010 B4: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-12-161-2101
Retaining Strap

121612101
160-740673: RNCC: 3 | RNVC: 2
160-740673: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-2335
Access Cover

123342335
5801357-7001.00: RNCC: 2 | RNVC: 2
5801357-7001.00: RNCC: 3 | RNVC: 2

18 Apr 1994

5340-12-331-8317
Protection Bellows

123318317
5899: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-12-351-5091
Mounting Bracket

123515091
4618900332: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-390-6196
Bumper

123906196
509167: RNCC: 3 | RNVC: 2
7113053: RNCC: 5 | RNVC: 2

28 Nov 2012

5340-12-345-3718
Spacing Threaded Standoff

123453718
54.0053.300.03: RNCC: 3 | RNVC: 2

10 Mar 1998

5340-12-349-6117
Spacing Threaded Standoff

123496117
46 52 2 314 427: RNCC: 3 | RNVC: 2
46522314427: RNCC: 5 | RNVC: 2

8 Dec 1999

5340-12-305-5974
Butt Hinge Leaf

123055974
4066570051: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-354-5379
Retaining Bail

123545379
CBD45307P03: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-130-9065

5340-12-328-8764
Angle Bracket

123288764
2300232-820650.000.0: RNCC: 2 | RNVC: 2
2300232-820650.000.0: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-300-8556
Double Angle Bracket

123008556
1423-910.79(5): RNCC: 3 | RNVC: 2

5 Sep 1984

5340-12-319-8439
Mounting Bracket

123198439
2300264-262190.01.0: RNCC: 2 | RNVC: 2
2300264-262190.01.0: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-326-9916
Mounting Bracket

123269916
2300232-977085.000.0: RNCC: 2 | RNVC: 2
2300232-977085.000.0: RNCC: 3 | RNVC: 2

18 Nov 1991

5340-12-312-4435
Angle Bracket

123124435
DS2801.0: RNCC: 3 | RNVC: 2

7 Jan 1988

5340-12-358-9571
Nonmetallic Bumper

123589571
U100-3216-002: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-195-8071
Mending Plate

121958071
160-71312-09: RNCC: 3 | RNVC: 2
160-71312-09: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-340-8125
Expansion Shield

123408125
8078: RNCC: 3 | RNVC: 2
EXA 12/15-A4: RNCC: 5 | RNVC: 2

18 Jun 1996

5340-12-184-2525
Angle Bracket

121842525
5801357-1300.24: RNCC: 2 | RNVC: 2
5801357-1300.24: RNCC: 3 | RNVC: 2
5801357-1300-24: RNCC: 5 | RNVC: 2
5801357-1300-24: RNCC: 5 | RNVC: 9
5801357-1300-24: RNCC: 5 | RNVC: 9

10 Jul 1980

5340-12-190-5593
Mending Plate

121905593
1200037-122.002: RNCC: 3 | RNVC: 2
1200037-122-002: RNCC: 5 | RNVC: 2

2 Dec 1981

5340-12-327-6784
Runner

123276784
4900223-200000.01: RNCC: 2 | RNVC: 2
4900223-200000.01: RNCC: 5 | RNVC: 9

18 Feb 1992

5340-12-329-1239
Loop Clamp

123291239
160-634090-05: RNCC: 3 | RNVC: 2
160-634090-05: RNCC: 5 | RNVC: 9

18 Jul 1992

5340-12-192-9801
Dust And Moisture Seal Protective Cap

121929801
12461: RNCC: 3 | RNVC: 2
0009880527: RNCC: 5 | RNVC: 2
02-2118: RNCC: 5 | RNVC: 2

9 Jun 1982

5340-12-304-4363
Angle Bracket

123044363
537161-3222.000: RNCC: 3 | RNVC: 2
537161-3222.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-198-7812
Angle Bracket

121987812
5801758-1000.07: RNCC: 2 | RNVC: 2
5801758-1000.07: RNCC: 3 | RNVC: 2
5801758-1000.07: RNCC: 3 | RNVC: 2
5801758-1000.07: RNCC: 3 | RNVC: 2
5801758-1000.07: RNCC: 5 | RNVC: 9
5801758-1000.07: RNCC: 5 | RNVC: 9

27 Feb 1984

5340-12-314-1160
Nonmetallic Bumper

123141160
105-23366.06: RNCC: 3 | RNVC: 2
105-23366-06: RNCC: 5 | RNVC: 2
GPLV79-13: RNCC: 5 | RNVC: 2

8 Jun 1988

5340-12-161-1221
Rod End Clevis

121611221
160-62145-01: RNCC: 3 | RNVC: 2
160-62145-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-2208
Mending Plate

123202208
5802298-210000.07: RNCC: 2 | RNVC: 2
5802298-210000.07: RNCC: 3 | RNVC: 2

19 Dec 1989

5340-12-702-6003
Loop Clamp

127026003
VG95211-ML-127026003: RNCC: 2 | RNVC: 2
5152A-26: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-0330
Mending Plate

123400330
DIN3015-L-VS-3-W4: RNCC: 2 | RNVC: 2
SIG3-W4: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-12-198-1907
Helical Compression Spring Seat

121981907
1420220005: RNCC: 3 | RNVC: 2
VDPM00696: RNCC: 5 | RNVC: 2
0128 8548: RNCC: 5 | RNVC: 2
1 420 220 005: RNCC: 5 | RNVC: 2
81115330001: RNCC: 5 | RNVC: 2
1420220005: RNCC: 5 | RNVC: 2
01288548EY0148-17: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-182-1828
Electrical-Mechanical Equipment Post

121821828
VG95148C5,5XM3X6,8-3.0615.71: RNCC: 2 | RNVC: 2
4583835: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X6,8-3.0615.71: RNCC: 3 | RNVC: 2
5801505-211000-004: RNCC: 5 | RNVC: 2
5801505-211000-004: RNCC: 5 | RNVC: 9
5801505-211000.004: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-358-9236
Angle Bracket

123589236
3184291540: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-168-9931
Support Hook

121689931
101007101: RNCC: 3 | RNVC: 2

13 Apr 1977

5340-12-331-8973
Casement Fastener

123318973
4641101: RNCC: 3 | RNVC: 2
EZ46411: RNCC: 5 | RNVC: 2

2 Jul 1993

5340-12-193-7974
Angle Bracket

121937974
GLZ9300118R1: RNCC: 3 | RNVC: 2

31 Aug 1982

5340-12-328-1568
Access Cover

123281568
4609300335: RNCC: 3 | RNVC: 2
7212744702: RNCC: 5 | RNVC: 9

11 Apr 1992

5340-12-391-4587
Mounting Plate

123914587
I007165TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-315-2520
Dust And Moisture Seal Protective Plug

123152520
0009872544: RNCC: 3 | RNVC: 2
000 987 25 44: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-190-8778
Helical Compression Spring Seat

121908778
2420326013: RNCC: 3 | RNVC: 2
8690740078: RNCC: 5 | RNVC: 2

21 Dec 1981

5340-12-363-9902
Section Block Clamp

123639902
0418 6664: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-387-7133
Plug Button

123877133
808702: RNCC: 3 | RNVC: 2

26 Jan 2012

5340-12-311-8449
Metal Runner

123118449
2300074-4183.01: RNCC: 2 | RNVC: 2
2300074-4183.01: RNCC: 3 | RNVC: 2
2300074-4183.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-189-5234
Loop Clamp

121895234
PAN4231DBBD5620: RNCC: 3 | RNVC: 2

5 Oct 1981

5340-12-135-2655

5340-12-194-0396
Access Cover

121940396
8345027-01: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-353-7916
Plain Solid Disk

123537916
26.04-55.4: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-327-6248
Schlosz Schluessel

123276248
0.078.467.9: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-12-322-2568
Helical Compression Spring Seat

123222568
1607-14: RNCC: 3 | RNVC: 2

6 Aug 1990

5340-12-329-1259
Lock-Release Lever

123291259
2300232-825200.003.0: RNCC: 2 | RNVC: 2
2300232-825200.003.0: RNCC: 3 | RNVC: 2
1529798: RNCC: 5 | RNVC: 2

21 Jul 1992

5340-12-306-8957
Mending Plate

123068957
1000173-312000.008.0: RNCC: 2 | RNVC: 2
1000173-312000.008.0: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-176-9573
Detent Plunger

121769573
CF446585A: RNCC: 3 | RNVC: 2
CF 446 585 A: RNCC: 5 | RNVC: 2
CF446585A: RNCC: 5 | RNVC: 2
CF 446 585 A: RNCC: 5 | RNVC: 2
CF446585A: RNCC: 5 | RNVC: 2
CF 446 585 A: RNCC: 5 | RNVC: 2

3 Jan 1979

5340-12-388-9530
Webbing Strap

123889530
17578/30FR: RNCC: 3 | RNVC: 2
17578/30FR: RNCC: 5 | RNVC: 2

9 May 2012

5340-12-182-4238
Butt Hinge Leaf

121824238
A40X3X1008HAN16515-3-1354-6: RNCC: 3 | RNVC: 2

1 Feb 1980

5340-12-361-6687
Manual Control Lever

123616687
GLD99-00-213000: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-330-4378
Angle Bracket

123304378
015-8543-000: RNCC: 3 | RNVC: 2
5L.4595.012.92: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-12-388-1759
Mounting Bracket

123881759
F1.1697-00-01-19.00-06: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-172-4793
Plain Solid Disk

121724793
601547: RNCC: 3 | RNVC: 2
4230-03-06-16-11: RNCC: 5 | RNVC: 2
4230-03-06-16-11: RNCC: 5 | RNVC: 9

23 Jan 1978

5340-12-324-8797
Mounting Plate

123248797
4900344-201600.00: RNCC: 2 | RNVC: 2
4900344-201600.00: RNCC: 3 | RNVC: 2

4 Apr 1991

5340-12-165-6575
Dust And Moisture Seal Protective Cap

121656575
11-02202: RNCC: 3 | RNVC: 2
9561490060: RNCC: 5 | RNVC: 2
110220200: RNCC: 5 | RNVC: 2

11 Jun 1976

5340-12-197-5852
Mending Plate

121975852
A-230129-207: RNCC: 3 | RNVC: 2
A230129-207: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-359-9332
Access Door Hinge

123599332
2500261-187073.000.0: RNCC: 2 | RNVC: 2
2500261-187073.000.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-182-3031
Butt Hinge Leaf

121823031
A25X3X208HAN16515-3-3214-7: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-365-1596
Rod End Clevis

123651596
D10: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-379-5178
Protection Bellows

123795178
120D014620.003.0: RNCC: 2 | RNVC: 2
120D014620.003.0: RNCC: 3 | RNVC: 2
1319670: RNCC: 5 | RNVC: 2

3 Aug 2009

5340-12-305-5001
Butt Hinge Leaf

123055001
81637310166: RNCC: 3 | RNVC: 2
81.63731.0166: RNCC: 5 | RNVC: 2
431.7.00: RNCC: 5 | RNVC: 9

14 Nov 1985

5340-12-358-7875
Manual Control Lever

123587875
0008353443: RNCC: 3 | RNVC: 2
90.704.28.90.7: RNCC: 5 | RNVC: 2

14 Nov 2002

5340-12-386-1504
Manual Control Lever

123861504
2481-395001.001.0: RNCC: 2 | RNVC: 2
2481-395001.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-358-6967
Mechanical Stop

123586967
2481-514200.008.0: RNCC: 2 | RNVC: 2
2481-514200.008.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-302-5523
Resilient Mount

123025523
YK03240475: RNCC: 3 | RNVC: 2
03240475: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 24 0475: RNCC: 5 | RNVC: 9

11 Jan 1985

5340-12-378-1404
Section Block Clamp

123781404
2300232-828000.008.0: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-12-386-5400
Double Angle Bracket

123865400
5561870340: RNCC: 3 | RNVC: 2

8 Sep 2011

5340-12-144-0085
Retaining Strap

121440085
BD75MMN346: RNCC: 3 | RNVC: 2
700346075200: RNCC: 5 | RNVC: 2
BD75MMN346: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-010-8124

5340-12-360-8338
Double Angle Bracket

123608338
4275000931: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-336-2587
Nut And Bolt Locking Plate

123362587
0730 749 092: RNCC: 3 | RNVC: 2
0730749092: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-364-8350
Mounting Plate

123648350
5172370835: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-12-353-7643
Dust And Moisture Seal Protective Plug

123537643
08002352: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-300-0380
Angle Bracket

123000380
5802017-603000.11: RNCC: 2 | RNVC: 2
5802017-603000.11: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-12-306-3067
Spring Tension Clip

123063067
KLS22: RNCC: 3 | RNVC: 2
0745252015: RNCC: 5 | RNVC: 2
10608002022: RNCC: 5 | RNVC: 2

18 Feb 1986

5340-12-380-3780
Dust And Moisture Seal Boot

123803780
4229870145: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-190-9393
Retaining Band

121909393
4068800014: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-344-0510
Mounting Bracket

123440510
2996.73.56: RNCC: 3 | RNVC: 2
2996.7356: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-371-8629
Mounting Bracket

123718629
7103845: RNCC: 3 | RNVC: 2
7094385: RNCC: 5 | RNVC: 2

23 May 2007

5340-12-388-5416
Mounting Bracket

123885416
030.322: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-328-4954
Metallic Bumper

123284954
2653-054230.02: RNCC: 2 | RNVC: 2
2653-054230.02: RNCC: 3 | RNVC: 2

26 May 1992

5340-12-166-0543
Loop Clamp

121660543
8379951101: RNCC: 3 | RNVC: 2
4799-030: RNCC: 5 | RNVC: 2
4799030: RNCC: 5 | RNVC: 2

29 Jul 1976

5340-12-350-2510
Angle Bracket

123502510
2125-114130.32B: RNCC: 2 | RNVC: 2
2125-114130.32B: RNCC: 3 | RNVC: 2

8 Mar 2000

5340-12-354-8914
Mounting Bracket

123548914
5400049-118653.00: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-12-316-6755
Access Cover

123166755
5800777-1290.01: RNCC: 2 | RNVC: 2
5800777-1290.01: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-389-0608
Loop Clamp

123890608
DAN116-02: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-329-6296
Angle Bracket

123296296
C22136-A1200-C6: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-12-174-4938
Hand Crank

121744938
D7301-25-40: RNCC: 3 | RNVC: 9
D7301-25-40: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-319-2884
Mounting Bracket

123192884
1700002-120: RNCC: 2 | RNVC: 2
500512: RNCC: 3 | RNVC: 2
500512: RNCC: 5 | RNVC: 2

19 Sep 1989

5340-12-338-7247
Mounting Bracket

123387247
2300013-3210.03: RNCC: 2 | RNVC: 2
7900621-00100.03: RNCC: 3 | RNVC: 2
2300013-3210.03: RNCC: 5 | RNVC: 2
2300013-3210.03: RNCC: 5 | RNVC: 9
9911195: RNCC: 5 | RNVC: 9

21 Aug 1995

5340-12-383-5567
Clamping Catch

123835567
3114-0007: RNCC: 3 | RNVC: 2
3114-0007: RNCC: 5 | RNVC: 2

8 Nov 2010

5340-12-342-6208
Mounting Plate

123426208
U100-3810-001: RNCC: 2 | RNVC: 2
U100-3810-001: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-363-1922
Nonmetallic Bumper

123631922
J0423752H525-001A0-006: RNCC: 3 | RNVC: 2

12 May 2004

5340-12-391-8941
Loop Clamp

123918941
0019953502: RNCC: 3 | RNVC: 2
F14LS-96-0484VAA: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-12-198-5594
Angle Bracket

121985594
NO PRIMARY REF 12-198-5594: RNCC: 3 | RNVC: 2
5513 123950: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-306-3652
Nonmetallic Bumper

123063652
47020-001: RNCC: 3 | RNVC: 2
47 020-001: RNCC: 5 | RNVC: 9

24 Feb 1986

5340-12-337-7873
Sealing Plug Assembly

123377873
2300002-122400.016: RNCC: 2 | RNVC: 2
9903443: RNCC: 3 | RNVC: 2
2300002-122400.016: RNCC: 5 | RNVC: 2
2300002-122400.016: RNCC: 5 | RNVC: 9
9903443: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-12-321-8062
Angle Bracket

123218062
2300002-065600.001: RNCC: 2 | RNVC: 2
2300002-065600-001: RNCC: 3 | RNVC: 2
2300002-065600.001: RNCC: 3 | RNVC: 2
2300002-065600.001: RNCC: 5 | RNVC: 9
9832087: RNCC: 5 | RNVC: 9
2300002-065 600.001: RNCC: 5 | RNVC: 9
2300002-065600-001: RNCC: 5 | RNVC: 9

28 Jun 1990

5340-12-187-1057
Retaining Strap

121871057
53-1195-017-00: RNCC: 3 | RNVC: 2

5 Mar 1981

5340-12-365-6357
Angle Bracket

123656357
J92228341-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-154-3404
Webbing Strap

121543404
VG95211-ML-121543404: RNCC: 2 | RNVC: 2
160-72083: RNCC: 3 | RNVC: 2
160-72083: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-0708
Bail Handle

121980708
10505-014: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-12-329-0637
Helical Compression Spring Seat

123290637
100418-0907.00.01: RNCC: 2 | RNVC: 2
100418-0907.00.01: RNCC: 3 | RNVC: 2
100418-0907.00.01: RNCC: 5 | RNVC: 9

15 Jul 1992

5340-12-172-4619
Case Corner

121724619
DIN7469-A28ZN: RNCC: 2 | RNVC: 2
A28DIN7469VERZINKT: RNCC: 5 | RNVC: 2

23 Jan 1978

5340-12-328-4631
Webbing Strap

123284631
70701-140049-99: RNCC: 2 | RNVC: 2
70701-140049-99: RNCC: 5 | RNVC: 9

21 May 1992

5340-12-350-7294
Lock Key

123507294
5803937-005: RNCC: 3 | RNVC: 2

11 May 2000

5340-12-388-1209
Shimmy Damper

123881209
F1.1697-00-01-11.00-03: RNCC: 3 | RNVC: 2

24 Feb 2012

5340-12-301-7905
Dust And Moisture Seal Protective Plug

123017905
EUV516071: RNCC: 3 | RNVC: 2
0005421281: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-330-2984
Access Door

123302984
913300201: RNCC: 3 | RNVC: 2
9133.002-00: RNCC: 5 | RNVC: 2
9133.002-01: RNCC: 5 | RNVC: 2
913300200: RNCC: 5 | RNVC: 2

28 Nov 1992

5340-12-190-6823
Pad Eye

121906823
NO PRIMARY REF 12-190-6823: RNCC: 3 | RNVC: 2
5710137171: RNCC: 5 | RNVC: 9
5710 137171: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-190-7230
Angle Bracket

121907230
NO PRIMARY REF 12-190-7230: RNCC: 3 | RNVC: 2
7512136157: RNCC: 5 | RNVC: 9
7512 136157: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-313-6412
Turnbuckle Body

123136412
DIN1479-SPM20-ST-B3C: RNCC: 2 | RNVC: 2
5500020KADMIERT: RNCC: 3 | RNVC: 2
DIN1479-SPM20-ST-B3C: RNCC: 5 | RNVC: 2
SPM20DIN1479B3C: RNCC: 5 | RNVC: 2

21 Apr 1988

5340-12-198-4552
Bow Handle

121984552
CF 802 219 AE: RNCC: 3 | RNVC: 2
CF 802 219 AE: RNCC: 3 | RNVC: 2
CF 445 793-R: RNCC: 5 | RNVC: 2
CF 445 793-R: RNCC: 5 | RNVC: 2

30 Jan 1984

5340-12-333-4903
Protection Bellows

123334903
3.3303-7700.1: RNCC: 3 | RNVC: 2
0002951383: RNCC: 5 | RNVC: 2

22 Dec 1993

5340-12-347-2988
Access Cover

123472988
B-371507: RNCC: 3 | RNVC: 2
371 507: RNCC: 5 | RNVC: 2

24 Nov 1998

5340-12-353-0489
Angle Bracket

123530489
16001569: RNCC: 3 | RNVC: 2
6481.013.4: RNCC: 5 | RNVC: 2

23 Jan 2001

5340-12-190-4225
Rod End Clevis

121904225
2412120004: RNCC: 3 | RNVC: 2
2 412 120 004: RNCC: 5 | RNVC: 2
8690740540: RNCC: 5 | RNVC: 2

25 Nov 1981

5340-12-392-4879
Mounting Bracket

123924879
10222-189915.000.0: RNCC: 2 | RNVC: 2
10222-189915.000.0: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-167-5898
Dust And Moisture Seal Protective Plug

121675898
700M12X1: RNCC: 3 | RNVC: 2
9561490110: RNCC: 5 | RNVC: 2
GPN700M12X1FORMA: RNCC: 5 | RNVC: 2
GPN700 FORM A M12X1: RNCC: 5 | RNVC: 9
41311: RNCC: 5 | RNVC: 9
GPN700,M12X1 FORM A: RNCC: 5 | RNVC: 9
GPN700M12X1F0RMA: RNCC: 5 | RNVC: 9
700121000: RNCC: 5 | RNVC: 9
AM12X1GPN700: RNCC: 5 | RNVC: 9
M12X1GPN700F0RMA: RNCC: 5 | RNVC: 9

3 Jan 1977

5340-12-364-4449
Mounting Bracket

123644449
2300425-970488.000.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-190-9147
Spring Tension Clip

121909147
4-123352: RNCC: 3 | RNVC: 2

22 Dec 1981

5340-12-350-7179
Spring Loaded Cylinder Fastener

123507179
GN613-8-G-NI: RNCC: 3 | RNVC: 2

10 May 2000

5340-12-364-7685
Dust And Moisture Seal Protective Plug

123647685
620U17B: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-389-8635
Expansion Shield

123898635
072095: RNCC: 3 | RNVC: 2
UX6X50R: RNCC: 5 | RNVC: 2

6 Sep 2012

5340-12-388-3858
Mechanical Stop

123883858
X00034972: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-386-8636
Retaining Clip

123868636
0.820.0548: RNCC: 3 | RNVC: 2
0.820.0548: RNCC: 5 | RNVC: 2

10 Oct 2011

5340-12-368-5094
Webbing Strap

123685094
1030099-971060.000.0: RNCC: 2 | RNVC: 2
1030099-971060.000.0: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-12-369-1458
Spring Tension Clip

123691458
499 22 4: RNCC: 3 | RNVC: 2

30 May 2006

5340-12-362-8980
Bridge Clamp

123628980
5509952968: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-12-198-2917
Mending Plate

121982917
C42080-A6-C80: RNCC: 3 | RNVC: 2

11 Jan 1984

5340-12-389-9376
Lock Key

123899376
KV1017-KURZ: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-12-347-3522
Clamping Catch

123473522
2300148-188502.002: RNCC: 2 | RNVC: 2
9843931: RNCC: 3 | RNVC: 2
2300148-188502.002: RNCC: 5 | RNVC: 2
9843931: RNCC: 5 | RNVC: 9
2300148-188502.002: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-12-702-8057
Strap Fastener Loop

127028057
50-40700900035: RNCC: 2 | RNVC: 2
1385722202001665: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-322-0098
Mounting Bracket

123220098
23290-151071.000: RNCC: 2 | RNVC: 2
98599006: RNCC: 3 | RNVC: 2
23290-151071.000: RNCC: 5 | RNVC: 9
98599006: RNCC: 5 | RNVC: 9

17 Jul 1990

5340-12-393-5812
Section Block Clamp

123935812
160-72085-02: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-316-5517
Access Cover

123165517
NO PRIMARY REF 12-316-5517: RNCC: 3 | RNVC: 2
667 2042 000: RNCC: 5 | RNVC: 9
6672042000: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-12-363-1152
Angle Bracket

123631152
2125-121070A63B: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-390-7482
Double Angle Bracket

123907482
8902830051: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-12-309-3937
Retaining Band

123093937
11311460814: RNCC: 3 | RNVC: 9

21 Jan 1987

5340-12-368-1630
Loop Clamp

123681630
357253141A: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-159-3107
Strap End Clip

121593107
NO PRIMARY REF 12-159-3107: RNCC: 3 | RNVC: 2
20VG4862: RNCC: 5 | RNVC: 9
VG4862-20: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-8472
Angle Bracket

123638472
J28230030-403: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-343-7052
Runner

123437052
11311335576: RNCC: 3 | RNVC: 2
1 335 576: RNCC: 5 | RNVC: 2
11131335576: RNCC: 5 | RNVC: 2

16 Jul 1997

5340-12-178-0148
Mounting Bracket

121780148
1121-70321-12: RNCC: 3 | RNVC: 2
1121-70321.12: RNCC: 5 | RNVC: 2

14 Mar 1979

5340-12-136-0652
Door Button

121360652
113837640A: RNCC: 3 | RNVC: 2
113837640: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-388-7706
Angle Bracket

123887706
601251-621050.02: RNCC: 2 | RNVC: 2
601251-621050.02: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-317-1815
Dust And Moisture Seal Protective Plug

123171815
1169871444: RNCC: 3 | RNVC: 2
9223387580: RNCC: 5 | RNVC: 2
6551-50: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-165-7854
Dust And Moisture Seal Protective Plug

121657854
0116 9034: RNCC: 3 | RNVC: 2
1169034EF8975-65: RNCC: 5 | RNVC: 2
4797248: RNCC: 5 | RNVC: 2
2H9X12X7-5H7565: RNCC: 5 | RNVC: 2
1169034: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-385-3072
Mounting Bracket

123853072
F1.4211-50-40-10.00-00: RNCC: 3 | RNVC: 2
G31732: RNCC: 5 | RNVC: 2

19 May 2011

5340-12-198-6130
Angle Bracket

121986130
23114-2800.01: RNCC: 2 | RNVC: 2
23114-2800.01: RNCC: 3 | RNVC: 2
23114-2800.01: RNCC: 5 | RNVC: 9
23114-2800-01: RNCC: 5 | RNVC: 9
23114-2800-01: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-313-3676
Clamping Catch

123133676
4200081-151541.001: RNCC: 3 | RNVC: 2
4200081-151841.001: RNCC: 5 | RNVC: 9

25 Mar 1988

5340-12-155-2581
Butt Hinge

121552581
160-25564-08: RNCC: 3 | RNVC: 2
160-25564-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-343-4997
Mounting Bracket

123434997
5022-045: RNCC: 3 | RNVC: 2
F300 0T 022 4683: RNCC: 6 | RNVC: 9

26 Jun 1997

5340-12-332-0101
Catch Strike

123320101
V951L50-1AF: RNCC: 3 | RNVC: 2
4000.010: RNCC: 5 | RNVC: 2
919220: RNCC: 5 | RNVC: 2
FT NL 4000.010: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-12-335-4831
Lock-Release Lever

123354831
214959: RNCC: 3 | RNVC: 2
214105: RNCC: 5 | RNVC: 2
93089-110.13: RNCC: 5 | RNVC: 2
214105: RNCC: 5 | RNVC: 2
93083/01-110.13: RNCC: 5 | RNVC: 9

22 Aug 1994

5340-12-365-6305
Angle Bracket

123656305
J28130107-401: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-301-2717
Helical Compression Spring Seat

123012717
062900-200.22.10.00: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-12-329-0243
Electrical-Mechanical Equipment Post

123290243
58R068-4-5: RNCC: 2 | RNVC: 2
58R068-4-5: RNCC: 3 | RNVC: 2

10 Jul 1992

5340-12-312-5691
Catch Strike

123125691
4607430403: RNCC: 3 | RNVC: 2
603E038: RNCC: 3 | RNVC: 2
721 1 66 600 1: RNCC: 5 | RNVC: 9

19 Jan 1988

5340-12-188-3857
Escutcheon Plate

121883857
06161190004: RNCC: 3 | RNVC: 2
2011: RNCC: 5 | RNVC: 2
N01.224.2: RNCC: 5 | RNVC: 2

6 Jul 1981

5340-12-322-0126
Nonmetallic Solid Wheel

123220126
A200-7: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-302-7981
Angle Bracket

123027981
YK03330684: RNCC: 3 | RNVC: 2
03330684: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 33 0684: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-385-5335
Mounting Plate

123855335
10187-188412.001.0: RNCC: 2 | RNVC: 2
10187-188412.001.0: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-330-7812
Angle Bracket

123307812
6600153-982200.003.0: RNCC: 2 | RNVC: 2
6600153-982200.003.0: RNCC: 3 | RNVC: 2

9 Feb 1993

5340-12-388-7575
Mounting Bracket

123887575
10199-186000.001.0: RNCC: 2 | RNVC: 2
10199-186000.001.0: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-166-5773
Bail Handle

121665773
14021-20002-06: RNCC: 3 | RNVC: 2
893551: RNCC: 5 | RNVC: 2

28 Sep 1976

5340-12-304-4355
Mending Plate

123044355
537161-3011.000: RNCC: 3 | RNVC: 2
537161-3011.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-302-9533
Retaining Strap

123029533
DIN72571-1X8-ST-GALCD5C: RNCC: 2 | RNVC: 2
DIN72571-1X8-ST-GALCD5C: RNCC: 3 | RNVC: 2
1X8DIN72571STGALCD5C: RNCC: 5 | RNVC: 2

12 Feb 1985

5340-12-370-9703
Loop Clamp

123709703
81974202017: RNCC: 3 | RNVC: 2
81.97420-2017: RNCC: 5 | RNVC: 2
81.97420.2017: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-12-367-2567
Angle Bracket

123672567
635748-112: RNCC: 3 | RNVC: 2

26 Jul 2005

5340-12-700-9023
Mounting Bracket

127009023
VG95211-ML-127009023: RNCC: 2 | RNVC: 2
2.11.6100.8070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-316-7186
Mounting Plate

123167186
5600023-190370.005.0: RNCC: 2 | RNVC: 2
5600023-190370.005.0: RNCC: 3 | RNVC: 2
22012.0.02.320.05: RNCC: 3 | RNVC: 2
1519314: RNCC: 5 | RNVC: 2
22012.0.02.320.05: RNCC: 5 | RNVC: 9

7 Feb 1989

5340-12-383-9483
Dust And Moisture Seal Protective Cover

123839483
5.050-595.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-315-6762
Mounting Bracket

123156762
20446713: RNCC: 3 | RNVC: 2
1.421054: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-335-3298
Mounting Bracket

123353298
900-951302.00.0: RNCC: 3 | RNVC: 2

10 Aug 1994

5340-12-191-5983
Friction Catch Stud Receptacle

121915983
8-2417.00: RNCC: 2 | RNVC: 2
8-2417.00: RNCC: 3 | RNVC: 2
8-2417.00: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-193-5328
Webbing Strap

121935328
4617920062: RNCC: 3 | RNVC: 2
721 1 76 229 1: RNCC: 5 | RNVC: 9

2 Aug 1982

5340-12-322-7566
Ball Socket Seat

123227566
5200.111.400.009.1: RNCC: 3 | RNVC: 9
5200.111.400.009: RNCC: 5 | RNVC: 9
5200111400009: RNCC: 5 | RNVC: 9
52001114000091: RNCC: 5 | RNVC: 9

19 Sep 1990

5340-12-166-5992
Helical Compression Spring Retainer

121665992
WW 401 527 H: RNCC: 1 | RNVC: 2
WW 401 527 H: RNCC: 3 | RNVC: 2
WW 401 527 H: RNCC: 3 | RNVC: 2
WW 401 527 H: RNCC: 3 | RNVC: 2
WW401527H: RNCC: 5 | RNVC: 9
WW 401 527 H: RNCC: 5 | RNVC: 9
WW401527H: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-382-5354
Mounting Plate

123825354
0.0.406.32: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-12-176-9572
Mending Plate

121769572
CF 446 599 A: RNCC: 2 | RNVC: 2
CF 446 599 A: RNCC: 3 | RNVC: 2
CF 446 599 A: RNCC: 5 | RNVC: 2
CF 446 599 A: RNCC: 5 | RNVC: 2
CF 446 599: RNCC: 5 | RNVC: 9
CF 446 599: RNCC: 5 | RNVC: 9
CF446599: RNCC: 5 | RNVC: 9
CF 446 599: RNCC: 5 | RNVC: 9
CF446599: RNCC: 5 | RNVC: 9
CF 446 599: RNCC: 5 | RNVC: 9

3 Jan 1979

5340-12-184-9440
Angle Bracket

121849440
CF455305A: RNCC: 3 | RNVC: 2
CF 455 305 A: RNCC: 5 | RNVC: 2
CF455305A: RNCC: 5 | RNVC: 2
CF 455 305 A: RNCC: 5 | RNVC: 2

28 Aug 1980

5340-12-325-7995
Nonmetallic Bumper

123257995
5801984-981314.003.0: RNCC: 2 | RNVC: 2
PLATTE210X30X5MM.MOOSGUMMI 60SHA: RNCC: 3 | RNVC: 2
5801984-981314.003.0: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-330-3611
Dust And Moisture Seal Protective Plug

123303611
7451.0.07.00: RNCC: 3 | RNVC: 2
V50X30L,86SCHWARZ: RNCC: 3 | RNVC: 2
270R5030: RNCC: 3 | RNVC: 2
GPN270R5030: RNCC: 5 | RNVC: 2
304024003: RNCC: 5 | RNVC: 2
0009874145: RNCC: 5 | RNVC: 2

5 Dec 1992

5340-12-380-8391
Rod End Clevis

123808391
1557919: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-333-4835
Access Cover

123334835
391955: RNCC: 3 | RNVC: 2

22 Dec 1993

5340-12-180-4388
Double Angle Bracket

121804388
02489223: RNCC: 3 | RNVC: 2
2489223EE5008-43: RNCC: 5 | RNVC: 2

12 Sep 1979

5340-12-382-6860
Retaining Bail

123826860
5300.230.153.001: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-342-0270
Dust And Moisture Seal Protective Plug

123420270
H3A: RNCC: 3 | RNVC: 2

3 Dec 1996

5340-12-331-2209
Clamping Catch

123312209
0286502: RNCC: 3 | RNVC: 2

2 Apr 1993

5340-12-313-3364
Mending Plate

123133364
5801699-8420.00: RNCC: 2 | RNVC: 2
5801699-8420.00: RNCC: 3 | RNVC: 2
5801699-8420.00: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-356-6223
Spacing Threaded Standoff

123566223
2125-125214.01B: RNCC: 2 | RNVC: 2
2125-125214.01B: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-306-0822
Pad Eye

123060822
C42117-A248-C397: RNCC: 3 | RNVC: 2
H38-4729-50: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-368-4746
Double Angle Bracket

123684746
J92228317-405: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-12-323-5643
Webbing Strap

123235643
5803505-000800.00: RNCC: 2 | RNVC: 2
5803505-000800.00: RNCC: 3 | RNVC: 2
5803505-000800.00: RNCC: 5 | RNVC: 2

7 Dec 1990

5340-12-314-2055
Angle Bracket

123142055
272.1771.211-01: RNCC: 2 | RNVC: 2
272.1771.211-01: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-363-3255
Rod End Clevis

123633255
2653-185741.00: RNCC: 2 | RNVC: 2
2653-185741.00: RNCC: 3 | RNVC: 2

27 May 2004

5340-12-347-6029
Mounting Bracket

123476029
8854 130-201: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-388-7701
Angle Bracket

123887701
601251-201205.01: RNCC: 2 | RNVC: 2
601251-201205.01: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-144-9374
Loop Clamp

121449374
10TAN15801-3-1364-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-178-2323
Ball Socket Seat

121782323
DIN71805-B10LINKS: RNCC: 2 | RNVC: 2
DIN71805-B10-LINKS: RNCC: 3 | RNVC: 2
071805010205: RNCC: 5 | RNVC: 2
B10DIN71805LINKS: RNCC: 5 | RNVC: 2
B10LINKSDIN71805: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-387-8638
Mounting Bracket

123878638
7093037: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-185-4948
Bail Handle

121854948
38787: RNCC: 2 | RNVC: 2
38787: RNCC: 3 | RNVC: 2
38787: RNCC: 5 | RNVC: 9

11 Oct 1980

5340-12-338-8003
Angle Bracket

123388003
3600018-620050.01: RNCC: 2 | RNVC: 2
3600018-620050.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-369-8822
Mounting Bracket

123698822
30296749: RNCC: 2 | RNVC: 2
30296749: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-358-7966
Mounting Bracket

123587966
1213 7494: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-368-9678
Retaining Band

123689678
1470124: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-040-6989

5340-12-185-3949
Electrical-Mechanical Equipment Post

121853949
544255015: RNCC: 3 | RNVC: 2

3 Oct 1980

5340-12-199-0593
Spring Tension Clip

121990593
3146970011: RNCC: 3 | RNVC: 2

22 Mar 1984

5340-12-383-2708
Mending Plate

123832708
320051: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-332-2577
Plain Solid Disk

123322577
2410030023: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-010-8475

5340-12-387-3540
Dust And Moisture Seal Protective Cap

123873540
R900170485: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-392-1544
Rod End Clevis

123921544
5281.240.031.800: RNCC: 3 | RNVC: 2

8 May 2013

5340-12-392-2180
Metallic Solid Wheel

123922180
SPK100K: RNCC: 3 | RNVC: 2

16 May 2013

5340-12-360-1305
Mounting Bracket

123601305
9424601835: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-383-0231
Mounting Plate

123830231
310838: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-12-170-6447
Dust And Moisture Seal Protective Cap-Plug

121706447
610U18: RNCC: 3 | RNVC: 2
GPN610U18: RNCC: 5 | RNVC: 2
CPN610U18: RNCC: 5 | RNVC: 2
GPN610U18: RNCC: 5 | RNVC: 2
GPN 610-U18: RNCC: 5 | RNVC: 2
9789400180: RNCC: 5 | RNVC: 2
U18: RNCC: 5 | RNVC: 9
610001800: RNCC: 5 | RNVC: 9
GPN610,U18: RNCC: 5 | RNVC: 9
U18GPN610: RNCC: 5 | RNVC: 9

22 Jul 1977

5340-12-156-5483
Spring Tension Clip

121565483
42161-27500.08: RNCC: 3 | RNVC: 2
42161-27500-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-163-9983
Access Cover

121639983
V22.228.530000-26: RNCC: 3 | RNVC: 2
V2-228-530000-26: RNCC: 5 | RNVC: 2
V2.228.530000-26: RNCC: 5 | RNVC: 2
V22-228-530000-26EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-5163
Mounting Bracket

121775163
2300002-181043.003: RNCC: 2 | RNVC: 2
2300002-181043.003: RNCC: 3 | RNVC: 2
2300002-181043-003: RNCC: 5 | RNVC: 9
2300002-181043.003: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-321-4070
Quick Release Plunger

123214070
GN614-8-NI: RNCC: 3 | RNVC: 2
03070-08: RNCC: 3 | RNVC: 2
2208.008: RNCC: 3 | RNVC: 2
RBN410.4-8: RNCC: 3 | RNVC: 2
8-HWN-208: RNCC: 5 | RNVC: 2
NLM03070-08: RNCC: 5 | RNVC: 2
8HWN208: RNCC: 5 | RNVC: 9
307-08: RNCC: 5 | RNVC: 9
307.08: RNCC: 5 | RNVC: 9
NLM3070-08: RNCC: 5 | RNVC: 9

16 May 1990

5340-12-144-5355
Door Handle

121445355
0021-3515-300: RNCC: 3 | RNVC: 2
0021-3515-690: RNCC: 5 | RNVC: 2
21-3515-30: RNCC: 5 | RNVC: 2
0021-3515-300: RNCC: 5 | RNVC: 9
0021-3515-690: RNCC: 5 | RNVC: 9
21-3515-30: RNCC: 5 | RNVC: 9
21-3515-69: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-5114
Manual Control Handle

121775114
2300002-181181.000: RNCC: 2 | RNVC: 2
2300002-181181.000: RNCC: 3 | RNVC: 2
2300002-181181: RNCC: 5 | RNVC: 2
2300002-181181: RNCC: 5 | RNVC: 9
1073 352: RNCC: 5 | RNVC: 9
2300002-181181: RNCC: 5 | RNVC: 9
1073 352: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-383-9793
Turnbuckle

123839793
1552805: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-12-306-0745
Mending Plate

123060745
5801984-982600.002.0: RNCC: 2 | RNVC: 2
5801984-982600.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-305-1139
Angle Bracket

123051139
4900059-982114.002.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-332-0780
Mounting Bracket

123320780
201.704.50.0.0: RNCC: 3 | RNVC: 2

21 Jul 1993

5340-12-700-8894
Loop Clamp

127008894
2-10-12-8-2 CHIM.PAS. OST1 1112-: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-149-7733
Webbing Strap

121497733
5800603-0954.000: RNCC: 2 | RNVC: 2
ST5800603-0954.000: RNCC: 5 | RNVC: 2
7409590020: RNCC: 5 | RNVC: 2
ST5800603-0954-000: RNCC: 5 | RNVC: 9
5800603-0954-000: RNCC: 5 | RNVC: 9
74095 90020: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-1912
Butt Hinge Leaf

121971912
P-855941-007: RNCC: 3 | RNVC: 2
P855941-007: RNCC: 5 | RNVC: 2

28 Sep 1983

5340-12-313-6317
Nonmetallic Bumper

123136317
NO PRIMARY REF 12-313-6317: RNCC: 3 | RNVC: 2
6731 168769: RNCC: 5 | RNVC: 9

21 Apr 1988

5340-12-342-2400
Helical Compression Spring Seat

123422400
11200720139: RNCC: 3 | RNVC: 2
11.20072-0139: RNCC: 5 | RNVC: 2
11200720139: RNCC: 5 | RNVC: 2
200.07.021: RNCC: 5 | RNVC: 2

9 Jan 1997

5340-12-316-8868
Double Angle Bracket

123168868
01800-0000-01-02: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-350-8242
Nonmetallic Bumper

123508242
2300387-151165.001: RNCC: 2 | RNVC: 2
9909579: RNCC: 3 | RNVC: 2
2300387-151165.001: RNCC: 5 | RNVC: 9
9909579: RNCC: 5 | RNVC: 9

25 May 2000

5340-12-357-6347
Double Angle Bracket

123576347
J28130066-401: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-315-7459
Mounting Bracket

123157459
8332240241: RNCC: 1 | RNVC: 2
8332240241: RNCC: 3 | RNVC: 2
9867285: RNCC: 3 | RNVC: 2
9867285: RNCC: 5 | RNVC: 9
2300279-1180.09: RNCC: 5 | RNVC: 9
2300279-1180.09: RNCC: 5 | RNVC: 9

25 Nov 1988

5340-12-187-5480
Electrical-Mechanical Equipment Post

121875480
6.226.0.355.021.4: RNCC: 3 | RNVC: 2
6-226-0-355-021-4: RNCC: 5 | RNVC: 9
6.226.0.355.021.4: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-313-6274
Electrical-Mechanical Equipment Post

123136274
510252-0316.000: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-346-0052
Mounting Plate

123460052
1203 4053: RNCC: 3 | RNVC: 2
12034053EE0111-90: RNCC: 5 | RNVC: 2
3.602.0.650.012.4: RNCC: 5 | RNVC: 9

28 May 1998

5340-12-326-5211
Angle Bracket

123265211
2300232-184940.000.0: RNCC: 2 | RNVC: 2
2300232-184940.000.0: RNCC: 3 | RNVC: 2

30 Sep 1991

5340-12-701-3906
Loop Clamp

127013906
VG95211-ML-127013906: RNCC: 2 | RNVC: 2
5.12.5311.1000.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-9622
Mending Plate

121979622
CF 493 567: RNCC: 3 | RNVC: 2
CF 493 567: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-12-356-5661
Caster Frame

123565661
0.0.390.15: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-393-3718
Webbing Strap

123933718
4100094-982185.000.0: RNCC: 2 | RNVC: 2
4100094-982185.000.0: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-302-7878
Nonmetallic Bumper

123027878
CF 491 233: RNCC: 3 | RNVC: 2
CF 491 233: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-360-0752
Manual Control Handle

123600752
9417510170: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-350-4342
Section Block Clamp

123504342
JN0413GJ48: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-345-4106
Double Angle Bracket

123454106
8712033240: RNCC: 2 | RNVC: 2
8712033240: RNCC: 3 | RNVC: 2
871 203 32 40: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-12-393-0278
Mounting Bracket

123930278
1030105-259000.022.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-351-2238
Mounting Bracket

123512238
9125.959.4: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-393-0178
Access Cover

123930178
1030105-182000.001.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-374-3905
Mounting Plate

123743905
4373520573: RNCC: 3 | RNVC: 2
7088519: RNCC: 5 | RNVC: 2
A 437 352 05 73: RNCC: 5 | RNVC: 9

13 Feb 2008

5340-12-328-0920
T Bracket

123280920
7002013: RNCC: 3 | RNVC: 2

4 Apr 1992

5340-12-369-6280
Spacing Threaded Standoff

123696280
AM308/5: RNCC: 3 | RNVC: 2
340970: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-12-336-5943
Double Angle Bracket

123365943
GE5008T030: RNCC: 3 | RNVC: 2
GE 5008 T 030: RNCC: 5 | RNVC: 9
GE5008T030: RNCC: 5 | RNVC: 9

29 Nov 1994

5340-12-347-3593
Permanent Magnet

123473593
371 569-2: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-364-2627
Mounting Bracket

123642627
4256801514: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-306-4008
Mending Plate

123064008
V22.917.38-0: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-339-1686
Handle Grip

123391686
42048474: RNCC: 3 | RNVC: 2
42048474ED5052-80: RNCC: 5 | RNVC: 2

20 Oct 1995

5340-12-391-7451
Access Cover

123917451
0000150630: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-12-313-7581
Extension Drawer Slide Section

123137581
81623102085: RNCC: 3 | RNVC: 2
81.62310.2085: RNCC: 5 | RNVC: 2

3 May 1988

5340-12-193-0497
Retaining Strap

121930497
5802303140: RNCC: 3 | RNVC: 2

16 Jun 1982

5340-12-333-7106
Lock-Release Lever

123337106
15 0004 388: RNCC: 2 | RNVC: 2
15 0004 388: RNCC: 3 | RNVC: 2
150004388: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-12-320-1316
Loop Clamp

123201316
PAN4231D3220: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-391-6606
Protection Bellows

123916606
8977544304: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-12-330-4878
Spring Tension Clip

123304878
50248: RNCC: 3 | RNVC: 2
50 248: RNCC: 5 | RNVC: 2

22 Dec 1992

5340-12-340-1342
Webbing Strap

123401342
MZA E0 02: RNCC: 3 | RNVC: 2
2329-5000.00: RNCC: 5 | RNVC: 9
MZA E0 02.00: RNCC: 5 | RNVC: 9
MZA E0 02.01: RNCC: 5 | RNVC: 9

2 Mar 1996

5340-12-322-3176
Mending Plate

123223176
54.3050.000.11: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-12-360-0993
Retaining Band

123600993
9424298840: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-325-8038
Multiple Angle Bracket

123258038
3661590140: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-12-310-8873
Access Cover

123108873
53.0428.050.02: RNCC: 2 | RNVC: 2
53.0428.050.02: RNCC: 3 | RNVC: 2

6 Jul 1987

5340-12-305-7636
Nonmetallic Bumper

123057636
106059: RNCC: 3 | RNVC: 2

10 Dec 1985

Load More Results