What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 93 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 93 of 178

5340-12-346-8238
Rigid Caster

123468238
5.031.065.9: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-12-328-9701
Webbing Strap

123289701
2653-183010.00: RNCC: 2 | RNVC: 2
2653-183010.00: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-322-3405
Manual Control Handle

123223405
287.68.25.0: RNCC: 3 | RNVC: 9
287-68-250: RNCC: 5 | RNVC: 9

13 Aug 1990

5340-12-330-4974
Snap Hook

123304974
VG85266D130: RNCC: 2 | RNVC: 2
DIN5299-D130BK-1.3952.9: RNCC: 5 | RNVC: 2
D130VG85266: RNCC: 5 | RNVC: 2

23 Dec 1992

5340-12-193-7401
Nonmetallic Bumper

121937401
20.103-111/1/T.31: RNCC: 3 | RNVC: 2

25 Aug 1982

5340-12-364-4457
Spacing Threaded Standoff

123644457
43 613-055: RNCC: 3 | RNVC: 2
5.13.123: RNCC: 5 | RNVC: 2

28 Sep 2004

5340-12-701-6417
Mounting Plate

127016417
VG95211-ML-127016417: RNCC: 2 | RNVC: 2
5.12.7203.1001.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-7566
Loop Clamp

123587566
RSGU 1.3X4/12-W1: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-703-3257
Angle Bracket

127033257
VG95211-ML-127033257: RNCC: 2 | RNVC: 2
5.12.7904.8050.11: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-374-1960
Access Cover

123741960
1506185: RNCC: 3 | RNVC: 2
548-060205.03.0: RNCC: 5 | RNVC: 2
15009714: RNCC: 5 | RNVC: 2

29 Jan 2008

5340-12-303-3692
Rod End Clevis

123033692
DIN71752-G8X32-1.4571: RNCC: 2 | RNVC: 2
DIN71752-G8X32-1.4571: RNCC: 3 | RNVC: 2
DIN71752-G8X32-1.4571: RNCC: 3 | RNVC: 2
100245710832/000: RNCC: 3 | RNVC: 2
DIN71752-G8X32-X10CRNIMOTI1810: RNCC: 5 | RNVC: 2
G8X32DIN71752-1.4571: RNCC: 5 | RNVC: 2

19 Mar 1985

5340-12-333-0674
Nonmetallic Bumper

123330674
DIN95364-B50X28-M10X34-NR65ST: RNCC: 2 | RNVC: 2
25333/S-BSTN6590: RNCC: 5 | RNVC: 2
25333/S-NR65ST: RNCC: 5 | RNVC: 2
560006-M10X34.NR65.ST: RNCC: 5 | RNVC: 2
8 498 047: RNCC: 5 | RNVC: 2
25333-23-29: RNCC: 5 | RNVC: 2
VG95364-B50X28-M10X34-NR65ST: RNCC: 5 | RNVC: 9

26 Oct 1993

5340-12-320-6093
Mounting Bracket

123206093
P-296827-403: RNCC: 3 | RNVC: 2
P296827-403: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-12-134-8421
Expansion Plug

121348421
DIN470-30-ST-BL: RNCC: 2 | RNVC: 2
30DIN470: RNCC: 5 | RNVC: 2
30DIN470R0H: RNCC: 5 | RNVC: 2
30DIN470STBL: RNCC: 5 | RNVC: 2
N0116031: RNCC: 5 | RNVC: 2
N116031: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-4250
Casement Fastener

123134250
8708053-101: RNCC: 2 | RNVC: 2
272.338.007: RNCC: 3 | RNVC: 2
272.338 007: RNCC: 5 | RNVC: 9

30 Mar 1988

5340-12-700-9226
Loop Clamp

127009226
VG95211-ML-127009226: RNCC: 2 | RNVC: 2
200N-210: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-324-9977
Webbing Strap

123249977
79017/026-0900-0200: RNCC: 3 | RNVC: 2
79017/026-900-200: RNCC: 3 | RNVC: 2
79017/026-0900-0200: RNCC: 5 | RNVC: 9

22 Apr 1991

5340-12-337-4393
Mending Plate

123374393
9892557: RNCC: 3 | RNVC: 9
454-250420-001: RNCC: 5 | RNVC: 9

3 Mar 1995

5340-12-323-5731
Double Angle Bracket

123235731
160-25541-65: RNCC: 3 | RNVC: 2
160-25541.65: RNCC: 5 | RNVC: 2
160-25541-65: RNCC: 5 | RNVC: 2
160-25541.65: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-191-1104
Bail Handle

121911104
VG95529-120-3ST: RNCC: 2 | RNVC: 2
2901-2909: RNCC: 3 | RNVC: 2
VG95529-120-3ST: RNCC: 3 | RNVC: 2

13 Jan 1982

5340-12-386-2836
Mechanical Stop

123862836
009-221.120-016: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-12-391-6421
Bow Handle

123916421
R2-08.120.01: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-12-702-2028
Mounting Plate

127022028
VG95211-ML-127022028: RNCC: 2 | RNVC: 2
30.7211.1190: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-1583
Rod End Connector

123651583
AFG0538701: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-360-0010
Mounting Bracket

123600010
9414293169: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-149-1181
Retaining Strap

121491181
ELP0S124: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-301-2386
Mending Plate

123012386
4178800: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-394-0250
Mounting Bracket

123940250
L313M2851101: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-369-9505
Access Cover

123699505
62051: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-12-310-4325
Pad Eye

123104325
4355510243: RNCC: 3 | RNVC: 2

21 May 1987

5340-12-158-5185

5340-12-361-0510
Double Angle Bracket

123610510
J21520053-401: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-194-9385
Double Angle Bracket

121949385
66.3851.210.01-A002: RNCC: 3 | RNVC: 2
161552: RNCC: 5 | RNVC: 2
66-3851-210-01A002: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-370-0426
Webbing Strap

123700426
79010/022: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-12-180-6651
Plain Solid Disk

121806651
0287 3964: RNCC: 3 | RNVC: 2
2873964: RNCC: 5 | RNVC: 2
2873964EE0704-01: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-328-9387
Leakproof Seal Plug

123289387
0295 0804: RNCC: 3 | RNVC: 2
02950804EE0704-98: RNCC: 5 | RNVC: 2
2950804EE0704-98: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-321-1005
Expansion Plug

123211005
DIN442-70-ST-PHR: RNCC: 2 | RNVC: 2
50126500: RNCC: 3 | RNVC: 2

27 Mar 1990

5340-12-176-0266
Multiple Angle Bracket

121760266
2300074-9704.07: RNCC: 2 | RNVC: 2
2300074-9704.07: RNCC: 3 | RNVC: 2
2300074-9704-07: RNCC: 5 | RNVC: 2
HT23/7891/01: RNCC: 5 | RNVC: 9
2300074-9704-07: RNCC: 5 | RNVC: 9
2300074-9704-07: RNCC: 5 | RNVC: 9
2300074-9704.07: RNCC: 5 | RNVC: 9

6 Nov 1978

5340-12-177-9907
Dust And Moisture Seal Protective Cap-Plug

121779907
TL4-248: RNCC: 3 | RNVC: 2
H112: RNCC: 5 | RNVC: 9

13 Mar 1979

5340-12-702-1861
Mounting Bracket

127021861
VG95211-ML-127021861: RNCC: 2 | RNVC: 2
30.7206.340: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-151-4432
Nonmetallic Bumper

121514432
23111-3601.14: RNCC: 2 | RNVC: 2
15-2105: RNCC: 3 | RNVC: 2
23111-3601.14: RNCC: 3 | RNVC: 2
23111-3601-14: RNCC: 5 | RNVC: 2
23111-3601-14: RNCC: 5 | RNVC: 9
23111-3601-14: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-5523
Angle Bracket

123265523
8440.1000: RNCC: 3 | RNVC: 2
KS/RAT/36: RNCC: 5 | RNVC: 2

7 Oct 1991

5340-12-388-1202
Mounting Bracket

123881202
F1.1697-00-01-19.00-03: RNCC: 3 | RNVC: 2

24 Feb 2012

5340-12-301-6379
Mending Plate

123016379
43712270-601: RNCC: 2 | RNVC: 2
43712270-601: RNCC: 3 | RNVC: 2
43712270-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-312-4620
Lock-Release Lever

123124620
1000093-31752.00.0: RNCC: 2 | RNVC: 2
1000093-31752.00.0: RNCC: 3 | RNVC: 2

8 Jan 1988

5340-12-335-0220
Mounting Plate

123350220
4-188348: RNCC: 3 | RNVC: 2

12 Jul 1994

5340-12-375-2652
Butt Hinge

123752652
1.54.0151.0: RNCC: 3 | RNVC: 2
825-859: RNCC: 5 | RNVC: 2

13 May 2008

5340-12-394-4404
Mending Plate

123944404
304-S1-WPEM: RNCC: 3 | RNVC: 2
1571090: RNCC: 5 | RNVC: 2

3 Dec 2013

5340-12-376-3201
Access Cover

123763201
BK207841-D: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-12-320-1183
Mending Plate

123201183
1004501: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-349-8847
Double Angle Bracket

123498847
54.1038.062.01: RNCC: 2 | RNVC: 2
54.1038.062.01: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-346-2522
Nut And Bolt Retainer

123462522
797724: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-12-393-7412
Bumper

123937412
1094805: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-043-3033

5340-12-350-8427
Dust And Moisture Seal Protective Cap-Plug

123508427
400.35.01: RNCC: 3 | RNVC: 2

29 May 2000

5340-12-346-7661
Loop Clamp

123467661
6L.3821.01500-A001: RNCC: 3 | RNVC: 2

8 Sep 1998

5340-12-323-3832
Angle Bracket

123233832
28W097: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-12-321-4275
Mounting Bracket

123214275
0216 6433: RNCC: 3 | RNVC: 2

17 May 1990

5340-12-377-5157
Access Door Hinge

123775157
450310: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-12-340-0085
Mounting Bracket

123400085
1.4260-153: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-12-306-0668
Lock-Release Lever

123060668
5801984-981711.001.0: RNCC: 2 | RNVC: 2
5801984-981711.001.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-180-4060
Mounting Bracket

121804060
CF 311 677 -X: RNCC: 3 | RNVC: 2
CF 311 677 -X: RNCC: 5 | RNVC: 2
CF 311 677 -X: RNCC: 5 | RNVC: 2
CF3116770X: RNCC: 5 | RNVC: 9
CF3116770X: RNCC: 5 | RNVC: 9
CF3116770X: RNCC: 5 | RNVC: 9

10 Sep 1979

5340-12-348-5138
Mechanic Equipment Hardware Kit

123485138
Y 0380-00: RNCC: 3 | RNVC: 2
Y 0380-00: RNCC: 3 | RNVC: 2

7 Jul 1999

5340-12-132-7628
Helical Compression Spring Seat

121327628
0122 2187: RNCC: 3 | RNVC: 2
01222187: RNCC: 5 | RNVC: 9
6-1217-10-0-019-4: RNCC: 5 | RNVC: 9
6.1217.10.0.019.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-2905
Angle Bracket

123262905
704-152241-000-8: RNCC: 3 | RNVC: 2

27 Aug 1991

5340-12-329-0111
Dust And Moisture Seal Boot

123290111
51976010233: RNCC: 3 | RNVC: 2
3911123019: RNCC: 3 | RNVC: 2
51.97601-0233: RNCC: 5 | RNVC: 2
39 111 23 019: RNCC: 5 | RNVC: 2

8 Jul 1992

5340-12-190-3086
Metal Runner

121903086
5801544-0120.004: RNCC: 3 | RNVC: 2
5801544-0120-004: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-326-2053
Rod End Clevis

123262053
7002086: RNCC: 3 | RNVC: 2
4-7002-086: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-315-1554
Loop Clamp

123151554
DIN3016-1-E1-5X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-5X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.5/15-W1: RNCC: 3 | RNVC: 2
09400015005: RNCC: 5 | RNVC: 2
9400015005: RNCC: 5 | RNVC: 2
DIN3016-E1-5X15W1-2: RNCC: 5 | RNVC: 9
DIN3016-E1-5X15-W1-2: RNCC: 5 | RNVC: 9
DIN3016-E1-5X15W1-2: RNCC: 5 | RNVC: 9
RSGU0.5/15: RNCC: 5 | RNVC: 9
VG95931-E5X15-W1: RNCC: 5 | RNVC: 9

23 Sep 1988

5340-12-701-7307
Angle Bracket

127017307
VG95211-ML-127017307: RNCC: 2 | RNVC: 2
5.12.7607.8220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-144-3455
Resilient Mount

121443455
DIN95368-C1-1-NR60-ST-MIT SCHRAU: RNCC: 2 | RNVC: 2
786026S1.NR60.ST-MIT SCHRAUBEN: RNCC: 5 | RNVC: 2
13100511: RNCC: 5 | RNVC: 2
10089-250: RNCC: 5 | RNVC: 2
VG95368-C1-1-NR60ST-MIT SCHRAUBE: RNCC: 5 | RNVC: 9
13100106: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-7671
Metal Runner

123037671
4900278-103300.00: RNCC: 2 | RNVC: 2
4900278-103300.00: RNCC: 3 | RNVC: 2

25 Apr 1985

5340-12-320-7064
Mending Plate

123207064
C249-A37-B46: RNCC: 2 | RNVC: 2
C249-A37-B46: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-310-9124
Access Cover

123109124
P-855337-401: RNCC: 3 | RNVC: 2
P855337-401: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-12-146-8179
Resilient Mount

121468179
DIN95363-E30X20-NR55ST: RNCC: 2 | RNVC: 2
1.30.20.3B.55NR/ST: RNCC: 5 | RNVC: 2
81170-30X20-M8X20.NR55.ST: RNCC: 5 | RNVC: 2
BI4-40-25N: RNCC: 5 | RNVC: 9
N1118-31-260: RNCC: 5 | RNVC: 9
VG95363-E30X20-NR55ST: RNCC: 5 | RNVC: 9
VG95363E30X20NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-6735
Resilient Mount

123156735
2300007-031500.000.0: RNCC: 2 | RNVC: 2
13200209: RNCC: 3 | RNVC: 2
2300007-031500.000.0: RNCC: 5 | RNVC: 2
845-2300007-031500.000.0: RNCC: 5 | RNVC: 2
2300007-031500.000.0: RNCC: 5 | RNVC: 2
2300007-031500.000.0: RNCC: 5 | RNVC: 2
2300007-031500-00-0: RNCC: 5 | RNVC: 9
2300007-031500.00.0: RNCC: 5 | RNVC: 9

18 Nov 1988

5340-12-173-1783
Loop Clamp

121731783
DIN3016-1-A1-51X20-W1-2: RNCC: 2 | RNVC: 2
RS1.51/20: RNCC: 3 | RNVC: 2
DIN3016-A1-51X20-W1-2: RNCC: 3 | RNVC: 2
4110020051: RNCC: 5 | RNVC: 2
RS1100-51-20: RNCC: 5 | RNVC: 2
RS1100.51/20: RNCC: 5 | RNVC: 2
DIN3016-A1-51X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A51X20-W1: RNCC: 5 | RNVC: 9
VG95931A51X20W1: RNCC: 5 | RNVC: 9

22 Mar 1978

5340-12-343-5059
Angle Bracket

123435059
4900347-200600.01: RNCC: 2 | RNVC: 2
4900347-200600.01: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-12-342-0005
Nonmetallic Bumper

123420005
0005838-011: RNCC: 3 | RNVC: 2
0005838-011-ZG: RNCC: 5 | RNVC: 2
0005838-011: RNCC: 5 | RNVC: 9
0005838-011-ZG: RNCC: 5 | RNVC: 9

28 Nov 1996

5340-12-328-5350
Angle Bracket

123285350
2300354-789900-006: RNCC: 2 | RNVC: 2
07655-780001-99: RNCC: 5 | RNVC: 9

28 May 1992

5340-12-168-2787
Loop Clamp

121682787
LN9491B28: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-393-2090
Installations Guard

123932090
121W161100.005.0: RNCC: 2 | RNVC: 2
121W161100.005.0: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-12-318-5218
Expansion Plug

123185218
DIN443-B25-1.0501: RNCC: 2 | RNVC: 2
N0119191: RNCC: 5 | RNVC: 2
N0119191: RNCC: 5 | RNVC: 2

21 Jul 1989

5340-12-161-0600
Loop Clamp

121610600
160-76982-12: RNCC: 3 | RNVC: 2
160-76982-12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-0377
Latch Bar

123540377
DBT442-30: RNCC: 3 | RNVC: 2

29 May 2001

5340-12-193-5771
Webbing Strap

121935771
810126-200: RNCC: 2 | RNVC: 2
810126-200: RNCC: 3 | RNVC: 2
810126-200: RNCC: 5 | RNVC: 9
810126-200: RNCC: 5 | RNVC: 9

4 Aug 1982

5340-12-381-9575
Access Cover

123819575
601254-202300.01: RNCC: 3 | RNVC: 2

21 Apr 2010

5340-12-340-9902
Angle Bracket

123409902
20-5170-107: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-12-363-8479
Angle Bracket

123638479
J28230161-003: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-168-5469
Helical Compression Spring Retainer

121685469
WW 304 866 G: RNCC: 2 | RNVC: 2
WW 304 866 G: RNCC: 3 | RNVC: 9
WW304866F: RNCC: 5 | RNVC: 2
WW 304 866 F: RNCC: 5 | RNVC: 2
WW 304 866 G: RNCC: 5 | RNVC: 2
WW304866F: RNCC: 5 | RNVC: 2
WW 304 866 F: RNCC: 5 | RNVC: 9
WW304866F: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-327-6780
Electrical-Mechanical Equipment Post

123276780
CF 802 072 A: RNCC: 2 | RNVC: 2
CF 802 072 A: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-301-5171
Dust And Moisture Seal Protective Plug

123015171
1000163-371040.008.0: RNCC: 2 | RNVC: 2
1000163-371040.008.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-306-2040
Nonmetallic Bumper

123062040
A-226991: RNCC: 3 | RNVC: 2
A-226 991: RNCC: 5 | RNVC: 2

5 Feb 1986

5340-12-322-6553
Manual Control Handle

123226553
3.0073.2-392: RNCC: 3 | RNVC: 2
TYP 392: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-355-4214
Double Angle Bracket

123554214
51.6816.010.95: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-301-4174
Rod End Clevis

123014174
4178880: RNCC: 3 | RNVC: 2

12 Oct 1984

5340-12-010-8454

5340-12-381-2714
Retaining Strap

123812714
10060370: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-12-312-7277
Mounting Bracket

123127277
3818990410: RNCC: 3 | RNVC: 2
381 899 04 10: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-011-6311

5340-12-322-2656
Mending Plate

123222656
400130245: RNCC: 2 | RNVC: 2
400130245: RNCC: 3 | RNVC: 2

7 Aug 1990

5340-12-044-1827

5340-12-340-2165
Angle Bracket

123402165
10363: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-12-302-7034
Mending Plate

123027034
178.E17.80B: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-147-9796

5340-12-129-4975
Nonmetallic Bumper

121294975
4700070: RNCC: 3 | RNVC: 2
0007660013: RNCC: 5 | RNVC: 2
44105: RNCC: 5 | RNVC: 2
972724001: RNCC: 5 | RNVC: 9
232: RNCC: 5 | RNVC: 9
978254140: RNCC: 5 | RNVC: 9
978254140: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-4898
Container Adapter

123224898
10361001: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-307-2805
Mounting Bracket

123072805
5577144: RNCC: 3 | RNVC: 2

28 May 1986

5340-12-197-7974
Mending Plate

121977974
1121-98251W2.09: RNCC: 3 | RNVC: 2

23 Nov 1983

5340-12-198-4223
Mending Plate

121984223
27 0323 072: RNCC: 2 | RNVC: 2
9859255: RNCC: 3 | RNVC: 9
27 0323 072: RNCC: 5 | RNVC: 2
27 0323 072: RNCC: 5 | RNVC: 9
270323072: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-149-5978
Gurtgewebe- Riemen

5340-12-149-6149
Federkraft- Klipp

5340-12-149-6839
Eins Schnappriegel

5340-12-150-6479
Spannschlosz

5340-12-150-7255
Spannschlosz

5340-12-375-0173
Angle Bracket

123750173
S259M8057236: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-12-381-8377
Mending Plate

123818377
000605-212000.03: RNCC: 2 | RNVC: 2
000605-212000.03: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-12-302-6151
Double Angle Bracket

123026151
YK03230866: RNCC: 3 | RNVC: 2
03230866: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 23 0866: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-356-3701
Mounting Bracket

123563701
SP20988: RNCC: 3 | RNVC: 2
96.2.032.0004: RNCC: 5 | RNVC: 9

19 Feb 2002

5340-12-302-5514
Rigid Caster

123025514
03140846: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 14 0846: RNCC: 5 | RNVC: 2

11 Jan 1985

5340-12-302-9063
Leather Strap

123029063
1865-210000.00.0: RNCC: 3 | RNVC: 9
1865-210000.00.0: RNCC: 3 | RNVC: 9

6 Feb 1985

5340-12-302-5529
Headless Straight Rod

123025529
YK03210785: RNCC: 3 | RNVC: 2
03210785: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 21 0785: RNCC: 5 | RNVC: 9

11 Jan 1985

5340-12-701-6462
Mounting Bracket

127016462
VG95211-ML-127016462: RNCC: 2 | RNVC: 2
5.12.7204.0950.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-362-6230
Zug Ersatzteilsatz

123626230
Y598101-188499.000.0: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-340-4078
Mechanical Stop

123404078
400-100000.01.0: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-163-0803
Clamping Catch

121630803
16409-105MIT0ESEVERZINKT: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-308-7593
Retaining Strap

123087593
KM.S01-110000.006: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-12-334-2866
Loop Clamp

123342866
76 NR.480-0220-11-00-00: RNCC: 3 | RNVC: 2
480-0220-11-00-00-76: RNCC: 5 | RNVC: 2
8652414: RNCC: 5 | RNVC: 2
VG85529-76-1.0038: RNCC: 5 | RNVC: 9

22 Apr 1994

5340-12-375-8816
Mechanical Stop

123758816
21.7381-01-11-00.00-28: RNCC: 3 | RNVC: 2

16 Jul 2008

5340-12-390-5343
Dust And Moisture Seal Protective Plug

123905343
350I29: RNCC: 3 | RNVC: 2
7088126: RNCC: 5 | RNVC: 2

21 Nov 2012

5340-12-350-4375
Section Block Clamp

123504375
JN0413EF40: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-702-4520
Manual Control Handle

127024520
VG95211-ML-127024520: RNCC: 2 | RNVC: 2
5.51.0602.1561.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-394-1086
Mounting Bracket

123941086
1572800: RNCC: 3 | RNVC: 2
592-200220.01.0: RNCC: 5 | RNVC: 2

5 Nov 2013

5340-12-308-2909
Angle Bracket

123082909
P-875230-002: RNCC: 3 | RNVC: 2
P875230-002: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-371-2713
Retaining Strap

123712713
SK861-060000.012.0: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-318-5917
Rod End Clevis

123185917
42073072: RNCC: 3 | RNVC: 2
42073072KZ5063-28: RNCC: 5 | RNVC: 2

31 Jul 1989

5340-12-361-5598
Compression Cup

123615598
1221-2178-04-00-01: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-126-1197
Leather Strap

121261197
NO PRIMARY REF 12-126-1197: RNCC: 3 | RNVC: 2
1440LX20BX5DALSRINGGEFERTIGT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-182-9762
Mending Plate

121829762
7800124021: RNCC: 3 | RNVC: 2
5801525-4200-01: RNCC: 5 | RNVC: 9
78001 24021: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-328-9736
Permanent Magnet

123289736
92.622-SCHWARZ: RNCC: 3 | RNVC: 2
OM30 SCHWARZ: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-384-4880
Access Cover

123844880
S933M1011101: RNCC: 3 | RNVC: 2

28 Feb 2011

5340-12-300-6735
Double Angle Bracket

123006735
4354920641: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-146-9645
Nut And Bolt Locking Plate

121469645
4072 302 007: RNCC: 3 | RNVC: 2
4072302007: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-6769
Webbing Strap

121806769
R20235: RNCC: 3 | RNVC: 2
R20235: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-179-6350
Dust And Moisture Seal Protective Cap

121796350
0009978386: RNCC: 1 | RNVC: 2
64 6390 310 509: RNCC: 3 | RNVC: 2
0009978386: RNCC: 3 | RNVC: 2
646390310067: RNCC: 5 | RNVC: 2

13 Jul 1979

5340-12-091-3532

5340-12-193-0012
Spring Tension Clip

121930012
4617920314: RNCC: 3 | RNVC: 2
726 1 75 058 1: RNCC: 5 | RNVC: 9

11 Jun 1982

5340-12-334-7913
Dust And Moisture Seal Protective Cap

123347913
SK-GL: RNCC: 3 | RNVC: 2
SK-JL: RNCC: 5 | RNVC: 9

21 Jun 1994

5340-12-390-1903
Multiple Angle Bracket

123901903
42-14063-400: RNCC: 3 | RNVC: 2

12 Oct 2012

5340-12-364-3503
Resilient Mount

123643503
DIN95363-A20X15-M6X10-NR40ST: RNCC: 2 | RNVC: 2

14 Sep 2004

5340-12-702-1675
Angle Bracket

127021675
VG95211-ML-127021675: RNCC: 2 | RNVC: 2
30.7100.2232: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-357-7808
Recess Handle

123577808
0019192560: RNCC: 3 | RNVC: 2
29107-01: RNCC: 5 | RNVC: 2

23 Jul 2002

5340-12-318-6456
Retaining Strap

123186456
4-68570: RNCC: 3 | RNVC: 2
268933: RNCC: 5 | RNVC: 2

3 Aug 1989

5340-12-386-1325
Manual Control Lever

123861325
2481-391332.001.0: RNCC: 2 | RNVC: 2
2481-391332.001.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-168-5471
Helical Compression Spring Retainer

121685471
WW304698B: RNCC: 3 | RNVC: 9
WW304698B: RNCC: 5 | RNVC: 2
WW 304 698 B: RNCC: 5 | RNVC: 2
WW304698B: RNCC: 5 | RNVC: 2
WW 304 698 B: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-386-6184
Mounting Plate

123866184
2500262-735111.001.0: RNCC: 2 | RNVC: 2
2500262-735111.001.0: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-12-145-3287

5340-12-322-3485
Plug Button

123223485
4618990018: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-327-0235
Angle Bracket

123270235
60227-650: RNCC: 3 | RNVC: 2

22 Nov 1991

5340-12-326-2074
Angle Bracket

123262074
3965461743: RNCC: 3 | RNVC: 2
396 546 17 43: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-329-8694
Butt Hinge Leaf

123298694
VG95211-ML-123298694: RNCC: 2 | RNVC: 2
65207-09003Y104: RNCC: 3 | RNVC: 2
65207-09003Y104: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-374-1289
Bow Handle

123741289
GN565-26-300-SW: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-12-167-3012
Snap Hook

121673012
NO PRIMARY REF 12-167-3012: RNCC: 3 | RNVC: 2
02616A: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-355-9504
Mending Plate

123559504
J92220539-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-315-1198
Nonmetallic Bumper

123151198
02451386: RNCC: 3 | RNVC: 2
245 1386: RNCC: 5 | RNVC: 2
2451386ED5095-04: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-363-6229
Loop Clamp

123636229
DIN3015-LD-5R-38-PA-W5: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-354-0376
Retaining Bail

123540376
DF442-06: RNCC: 3 | RNVC: 2

29 May 2001

5340-12-333-4332
Dust And Moisture Seal Protective Cap

123334332
1000121-1.2: RNCC: 2 | RNVC: 2
1000121-1.2: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-131-4149
Loop Clamp

121314149
DIN71555-60,5: RNCC: 2 | RNVC: 2
DIN71555-60,5: RNCC: 3 | RNVC: 2
60,5/71555BL: RNCC: 3 | RNVC: 2
DIN71555-60-5: RNCC: 5 | RNVC: 2
60-5DIN71555: RNCC: 5 | RNVC: 2
DIN71555-60-5: RNCC: 5 | RNVC: 2
5500100060: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-352-5896
Dust And Moisture Seal Protective Plug

123525896
117-10020K: RNCC: 3 | RNVC: 2
08400.0-00: RNCC: 5 | RNVC: 2

29 Nov 2000

5340-12-174-2354
Catch Strike

121742354
72L14-2-1AB: RNCC: 3 | RNVC: 2
61214-1-2AA: RNCC: 5 | RNVC: 2
61L14-1-1AA: RNCC: 5 | RNVC: 2
5M.3741.220.34: RNCC: 5 | RNVC: 2
12440855-9: RNCC: 5 | RNVC: 2
5M3741-220-34: RNCC: 5 | RNVC: 9

15 Jun 1978

5340-12-164-3959
Angle Bracket

121643959
2360-394500.00.0: RNCC: 2 | RNVC: 2
2360-394500.00.0: RNCC: 3 | RNVC: 2
2360-394500.00.0: RNCC: 5 | RNVC: 2
2360-394500-00-0: RNCC: 5 | RNVC: 9
2360-394500.00.0: RNCC: 5 | RNVC: 9
2360-394500-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-8445
Dust And Moisture Seal Protective Plug

123578445
320GL763: RNCC: 3 | RNVC: 2
GPN320GL763: RNCC: 5 | RNVC: 2

1 Aug 2002

5340-12-357-8892
Access Cover

123578892
11795202: RNCC: 3 | RNVC: 2
11795201: RNCC: 5 | RNVC: 2

8 Aug 2002

5340-12-381-0415
Block Clamp

123810415
GM 824 078: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-325-6422
Access Door

123256422
100013031: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-310-5094
Rubber Bumper

123105094
6053849: RNCC: 3 | RNVC: 9

27 May 1987

5340-12-043-1388

5340-12-315-1644
Shimmy Damper

123151644
085421: RNCC: 3 | RNVC: 2
085.4210314150: RNCC: 5 | RNVC: 2

24 Sep 1988

5340-12-301-1049
Dust And Moisture Seal Protective Cap

123011049
913018010101: RNCC: 3 | RNVC: 2
A10X12,3N13018: RNCC: 5 | RNVC: 2

21 Sep 1984

5340-12-311-4208
Retaining Clip

123114208
1447021100: RNCC: 3 | RNVC: 2
1447 021 100: RNCC: 5 | RNVC: 2

1 Sep 1987

5340-12-702-4222
Angle Bracket

127024222
VG95211-ML-127024222: RNCC: 2 | RNVC: 2
5.12.7205.1050.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-300-3003
Pad Eye

123003003
250146-193800.01.0: RNCC: 2 | RNVC: 2
250146-193800.01.0: RNCC: 3 | RNVC: 2
250146-193800-01-0: RNCC: 5 | RNVC: 2

21 Jul 1984

5340-12-303-1622
Dust And Moisture Seal Protective Cap-Plug

123031622
T4: RNCC: 3 | RNVC: 2
C 4098 657 07: RNCC: 5 | RNVC: 2
C 4098 657 07: RNCC: 5 | RNVC: 2
C 4098 657 -7: RNCC: 5 | RNVC: 2

1 Mar 1985

5340-12-192-8495
Nonmetallic Bumper

121928495
8-4101.01: RNCC: 2 | RNVC: 2
VG95092B15X8X30X8,5X13PUR60: RNCC: 2 | RNVC: 2
8-4101.01: RNCC: 3 | RNVC: 2
842.2.015.030.008,5.PUR60: RNCC: 3 | RNVC: 2
8-4101-01: RNCC: 5 | RNVC: 2
8-4101-01: RNCC: 5 | RNVC: 9
8-4101.01: RNCC: 5 | RNVC: 9
8-4101.01: RNCC: 5 | RNVC: 9

27 May 1982

5340-12-701-6126
Mounting Plate

127016126
VG95211-ML-127016126: RNCC: 2 | RNVC: 2
5.12.7010.1470.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-352-0539
Loop Clamp

123520539
23223-150000.05.0: RNCC: 2 | RNVC: 2
23223-150000.05.0: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-165-9647
Hand Crank

121659647
2996-54-14: RNCC: 3 | RNVC: 2

23 Jul 1976

5340-12-366-9975
Nonmetallic Bumper

123669975
1257030: RNCC: 3 | RNVC: 2
2197 2114-133: RNCC: 5 | RNVC: 2

28 Jun 2005

5340-12-331-2849
Pipe Hanger

123312849
U100-1707-000: RNCC: 2 | RNVC: 2
U100-1707-000: RNCC: 3 | RNVC: 2
U100-1707-000: RNCC: 3 | RNVC: 2
U100-1707-000: RNCC: 5 | RNVC: 2

16 Apr 1993

5340-12-165-6979
Nonmetallic Solid Wheel

121656979
20-6290-023: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-198-7710
Angle Bracket

121987710
4900123-1310.03: RNCC: 2 | RNVC: 2
4900123-1310.03: RNCC: 3 | RNVC: 2
4900123-1310.03: RNCC: 5 | RNVC: 9

24 Feb 1984

5340-12-377-8037
Retaining Bail

123778037
401-0112-23-20-001: RNCC: 3 | RNVC: 2

12 Feb 2009

5340-12-382-6345
Access Cover

123826345
V6550-03031-047: RNCC: 3 | RNVC: 2

19 Jul 2010

5340-12-359-9437
Dust And Moisture Seal Protective Plug

123599437
05039402: RNCC: 3 | RNVC: 2
05722566: RNCC: 5 | RNVC: 2

21 Mar 2003

5340-12-303-9472
Butt Hinge

123039472
3228800228: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-360-1297
Mounting Bracket

123601297
9424304557: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-384-8783
Turnbuckle Body

123848783
M2727012420000: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-367-2149
Manual Control Handle

123672149
RD99-00-023000.03: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-702-0230
Loop Clamp

127020230
VG95211-ML-127020230: RNCC: 2 | RNVC: 2
200N7-170: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-381-6676
Mounting Bracket

123816676
GSB-05: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-12-162-8728
Angle Bracket

121628728
21 606-001: RNCC: 3 | RNVC: 2
21606-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-371-7655
Dust And Moisture Seal Protective Plug

123717655
81960026005: RNCC: 3 | RNVC: 2
81.96002-6005: RNCC: 5 | RNVC: 2
81.96002.6005: RNCC: 5 | RNVC: 2

14 May 2007

5340-12-189-1834
Angle Bracket

121891834
23111-3390.00: RNCC: 2 | RNVC: 2
23111-3390.00: RNCC: 3 | RNVC: 2
1119505: RNCC: 5 | RNVC: 2
23111-3390-00: RNCC: 5 | RNVC: 9
1119 505: RNCC: 5 | RNVC: 9
1119505: RNCC: 5 | RNVC: 9
23111-3390.00: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-377-0355
Mounting Bracket

123770355
1030027-060000.006.0: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-12-701-7303
Mounting Bracket

127017303
VG95211-ML-127017303: RNCC: 2 | RNVC: 2
5.12.7607.8090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-5907
Mending Plate

123035907
704-125130-905-0: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-300-1582
Bridge Clamp

123001582
P-296805-405: RNCC: 3 | RNVC: 2
P296805-405: RNCC: 5 | RNVC: 2

7 Jul 1984

5340-12-383-2598
Retaining Clip

123832598
4135-0030: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-12-326-4961
Kunst Gleitschiene

123264961
5801984-981110.009.0: RNCC: 2 | RNVC: 2
5801984-981110.009.0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-12-337-0290
Butt Hinge

123370290
88626906003: RNCC: 3 | RNVC: 2
88.62690.6003: RNCC: 5 | RNVC: 2
A00.0075.00: RNCC: 5 | RNVC: 2

12 Jan 1995

5340-12-184-2335
Retaining Clip

121842335
211827401A: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-194-2188
Lock-Release Lever

121942188
300.570.02: RNCC: 3 | RNVC: 2
30057002: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-386-1842
Spacing Threaded Standoff

123861842
120D010600.010.0: RNCC: 2 | RNVC: 2
120D010600.010.0: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-355-1449
Retaining Band

123551449
3228900671: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-309-7925
Access Cover

123097925
6131603: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-378-3670
Mounting Plate

123783670
41208989: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-190-8754
Helical Compression Spring Seat

121908754
2410320055: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-377-1259
Retaining Band

123771259
41271176: RNCC: 3 | RNVC: 2
41271176EA50-7122: RNCC: 5 | RNVC: 2

12 Dec 2008

5340-12-185-2052
Bow Handle

121852052
C 3782 241: RNCC: 3 | RNVC: 2
C3782241: RNCC: 5 | RNVC: 2
C3782241: RNCC: 5 | RNVC: 2
C 3782 241: RNCC: 5 | RNVC: 2
3236AHS980MM: RNCC: 5 | RNVC: 9

20 Sep 1980

5340-12-386-2281
Angle Bracket

123862281
2481-393300.028.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-199-4381
Handwheel

121994381
1686621047: RNCC: 3 | RNVC: 9
1 686 621 047: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-369-5753
Friction Catch

123695753
88.007.2: RNCC: 3 | RNVC: 2
88007.2: RNCC: 5 | RNVC: 2
G3 400 103 2084DT: RNCC: 5 | RNVC: 2

26 Jul 2006

5340-12-302-7853
Metal Runner

123027853
CF 339 600 B: RNCC: 2 | RNVC: 2
CF 339 600 B: RNCC: 3 | RNVC: 2
CF 339 600 B: RNCC: 5 | RNVC: 2
CF 339 600 A: RNCC: 5 | RNVC: 9
CF 339 600 A: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-300-9363
Angle Bracket

123009363
1423-910.85(5): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-701-3096
Rod End Connector

127013096
5.12.5101.6760.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-388-3930
Sliding Block

123883930
1.32.FM6: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-316-4767
Bow Handle

123164767
22013.0.08.220.00: RNCC: 2 | RNVC: 2
22013.0.08.220.00: RNCC: 3 | RNVC: 2

19 Jan 1989

5340-12-167-5492
Dust And Moisture Seal Protective Cap

121675492
3554810: RNCC: 3 | RNVC: 2
2853-3148-00: RNCC: 5 | RNVC: 2
3554810: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-185-4400
Metal Runner

121854400
CF307383A: RNCC: 3 | RNVC: 2
CF 307 383 A: RNCC: 5 | RNVC: 2
CF307383A: RNCC: 5 | RNVC: 2
CF307383A: RNCC: 5 | RNVC: 2
CF 307 383 A: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-319-7445
Electrical-Mechanical Equipment Post

123197445
6100125-11200.002: RNCC: 2 | RNVC: 2
4240010101: RNCC: 3 | RNVC: 2

31 Oct 1989

5340-12-342-5196
Mounting Bracket

123425196
2300421-181042.000: RNCC: 2 | RNVC: 2
2300421-181042.000: RNCC: 3 | RNVC: 2
2300421-181042.000: RNCC: 5 | RNVC: 9
9915755: RNCC: 5 | RNVC: 9

24 Feb 1997

5340-12-304-3570
Double Angle Bracket

123043570
NO PRIMARY REF 12-304-3570: RNCC: 3 | RNVC: 2
5712161236: RNCC: 5 | RNVC: 9
5712 161236: RNCC: 5 | RNVC: 9

10 Jul 1985

5340-12-378-2850
Spacing Threaded Standoff

123782850
J04823262-028: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-12-346-2526
Rod Retainer Clip

123462526
93-57-5-08-0320: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-12-702-5894
Loop Clamp

127025894
VG95211-ML-127025894: RNCC: 2 | RNVC: 2
5.51.9205.0552.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-1282
Angle Bracket

123011282
A-243799-009: RNCC: 3 | RNVC: 2
A243799-009: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-165-3201
Dust And Moisture Seal Protective Cap

121653201
307.161-10322.05: RNCC: 3 | RNVC: 2
582-15-00-00-00-005: RNCC: 5 | RNVC: 2
582-15-000000005: RNCC: 5 | RNVC: 2
0307161-10322-05: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-136-8981
Retaining Strap

121368981
8403392: RNCC: 3 | RNVC: 2
0047-174: RNCC: 5 | RNVC: 2
0047174: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-5134
Flush Bolt

121775134
2300002-181970.003: RNCC: 2 | RNVC: 2
2300002-181970.003: RNCC: 3 | RNVC: 2
2300002-181970-003: RNCC: 5 | RNVC: 9
2300002-181970.003: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-199-3852
Loop Clamp

121993852
DIN3016-2-G1-82X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-82X15-W1-2: RNCC: 3 | RNVC: 2
SP82/15SKZ-W1: RNCC: 3 | RNVC: 2
1410000082: RNCC: 5 | RNVC: 2
SP82-15SKZ: RNCC: 5 | RNVC: 2
SP82/15SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-82X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G82X15-W1: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-371-5058
Caster Wheel

123715058
SPO 125/20G: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-12-312-5431
Access Cover

123125431
2300194-181730.001: RNCC: 2 | RNVC: 2
2300194-181730.001: RNCC: 3 | RNVC: 2
2300194-181730.001: RNCC: 5 | RNVC: 9
9843737: RNCC: 5 | RNVC: 9
2300194-181730.001: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-177-5161
Flush Bolt

121775161
2300002-181012.000: RNCC: 2 | RNVC: 2
2300002-181012.000: RNCC: 3 | RNVC: 2
2300002-181012: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-376-6782
Loop Clamp

123766782
RSGU1.13/15-W5-SILIKON: RNCC: 3 | RNVC: 2
09418195013: RNCC: 5 | RNVC: 2

28 Oct 2008

5340-12-338-5286
Access Cover

123385286
01005: RNCC: 3 | RNVC: 2
MM 2110 G 110: RNCC: 5 | RNVC: 2
01005: RNCC: 5 | RNVC: 9
MM 2110 G 110: RNCC: 5 | RNVC: 9
MM 2110 G 110-3: RNCC: 5 | RNVC: 9

24 Jul 1995

5340-12-176-8133
Double Angle Bracket

121768133
2300002-143300.005: RNCC: 2 | RNVC: 2
2300002-143300.005: RNCC: 3 | RNVC: 2
2300002-143300.005: RNCC: 3 | RNVC: 2
2300002-143300-005: RNCC: 5 | RNVC: 9
2300002-143300.005: RNCC: 5 | RNVC: 9
2300002-143300-005: RNCC: 5 | RNVC: 9

20 Dec 1978

5340-12-333-0701
Access Cover

123330701
29926: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-12-340-9318
Access Cover

123409318
2500034-199000.00.0: RNCC: 2 | RNVC: 2
2500034-199000.00.0: RNCC: 3 | RNVC: 2

5 Jul 1996

5340-12-196-4680
Casement Fastener

121964680
P-855943-013: RNCC: 3 | RNVC: 2
P855943-013: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-305-4986
Mending Plate

123054986
DIN3015-S-DP-4-W1-ZN: RNCC: 2 | RNVC: 2
HRS4DPSTZN: RNCC: 3 | RNVC: 2
DPAL6S-VERZINKT: RNCC: 3 | RNVC: 2
DP-C4-VERZINKT: RNCC: 3 | RNVC: 2
DPAL6S-VERZINKT: RNCC: 5 | RNVC: 2
DP-C4-VERZINKT: RNCC: 5 | RNVC: 2
DIN3015-SDP4-W1-ZN: RNCC: 5 | RNVC: 2
VG95934DP4-W1-ZN: RNCC: 5 | RNVC: 9

14 Nov 1985

5340-12-192-3989
Resilient Mount

121923989
DIN95363-D40X30-NR70ST: RNCC: 2 | RNVC: 2
81960200119: RNCC: 5 | RNVC: 2
1.40.30.1A.70NR/ST: RNCC: 5 | RNVC: 2
81160-40X30-M8X20.NR70.ST: RNCC: 5 | RNVC: 2
81.96020.0119: RNCC: 5 | RNVC: 2
5000020495: RNCC: 5 | RNVC: 2
BK6.21-27N: RNCC: 5 | RNVC: 9
VG95363-D40X30-NR70ST: RNCC: 5 | RNVC: 9
5000020495: RNCC: 5 | RNVC: 9

20 Apr 1982

5340-12-337-2183
Metallic Bumper

123372183
605.73-01-01-05-003: RNCC: 3 | RNVC: 2

3 Feb 1995

5340-12-365-1584
Lock-Release Lever

123651584
AFG072983-02: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-311-7635
Handle Grip

123117635
DG21-10.1SZ: RNCC: 3 | RNVC: 2

15 Oct 1987

5340-12-328-7756
Mounting Plate

123287756
VG95211-ML-123287756: RNCC: 2 | RNVC: 2
VP928821: RNCC: 3 | RNVC: 2

20 Jun 1992

5340-12-331-2963
Mounting Bracket

123312963
U100-1703-000: RNCC: 2 | RNVC: 2
U100-1703-000: RNCC: 3 | RNVC: 2
U100-1703-000: RNCC: 5 | RNVC: 2

19 Apr 1993

5340-12-350-9114
Spring Tension Clip

123509114
8842 420-041: RNCC: 3 | RNVC: 2

5 Jun 2000

5340-12-313-2228
Lock-Release Lever

123132228
270436: RNCC: 3 | RNVC: 2

11 Mar 1988

5340-12-300-8050
Angle Bracket

123008050
4252601560: RNCC: 3 | RNVC: 2

31 Aug 1984

5340-12-131-5600

5340-12-356-1759
Mechanical Stop

123561759
ED41-0800-00205-111: RNCC: 2 | RNVC: 2
ED41-0800-00205-111: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-356-0287
Webbing Strap

123560287
79057-3000: RNCC: 3 | RNVC: 2

15 Jan 2002

5340-12-379-9392
Loop Clamp

123799392
FX08 92-112 C6-W4: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-380-7732
Angle Bracket

123807732
601243-201300.04: RNCC: 2 | RNVC: 2
601243-201300.04: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-12-366-9016
Dust And Moisture Seal Protective Plug

123669016
5600-15: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-310-3441
Mounting Bracket

123103441
6100132-420000.00: RNCC: 2 | RNVC: 2
6100132-420000.00: RNCC: 3 | RNVC: 2

13 May 1987

5340-12-320-2240
Mounting Bracket

123202240
217208-2000: RNCC: 3 | RNVC: 2

20 Dec 1989

5340-12-356-8461
Angle Bracket

123568461
ED88-0100-01001-155: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-306-2922
Spring Tension Clip

123062922
6100135-1100.006: RNCC: 2 | RNVC: 2
0745252333: RNCC: 3 | RNVC: 2

17 Feb 1986

5340-12-365-7888
Mounting Plate

123657888
CBD32047P02: RNCC: 3 | RNVC: 2

3 Feb 2005

5340-12-176-3241
Loop Clamp

121763241
LN9491BK40: RNCC: 2 | RNVC: 2

23 Nov 1978

5340-12-332-1284
Butt Hinge Leaf

123321284
1H0823302: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-388-7525
Mounting Bracket

123887525
215.131567: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-195-9322
Compression Cup

121959322
YK6.0495.15.9.0002: RNCC: 3 | RNVC: 2
12152260: RNCC: 5 | RNVC: 9
6.0495.15.9.0002: RNCC: 5 | RNVC: 9

3 May 1983

5340-12-340-3539
Extension Drawer Slide

123403539
5.043.003.9: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-12-391-9576
Mounting Bracket

123919576
4100095-982148.000.0: RNCC: 2 | RNVC: 2
4100095-982148.000.0: RNCC: 3 | RNVC: 2

22 Apr 2013

5340-12-307-9404
Mending Plate

123079404
5801434-511000.02: RNCC: 2 | RNVC: 2
7800541002: RNCC: 3 | RNVC: 2
78005 41002: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-389-2638
Dust And Moisture Seal Boot

123892638
D0132469-001: RNCC: 3 | RNVC: 2
D0132469-001: RNCC: 5 | RNVC: 2

14 Jun 2012

5340-12-153-6474
Expansion Plug

121536474
DIN443-12-ST-A3P: RNCC: 2 | RNVC: 2
0110 7613: RNCC: 5 | RNVC: 2
1107613EY8828-60: RNCC: 5 | RNVC: 2
12DIN443A4C: RNCC: 5 | RNVC: 2
12DIN443VZK: RNCC: 5 | RNVC: 2
12DIN443VERZINKT: RNCC: 5 | RNVC: 2
1107613: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-8761
Schlosz Schluessel

123168761
1004-24: RNCC: 3 | RNVC: 2
204-0118: RNCC: 3 | RNVC: 2

20 Feb 1989

5340-12-151-6911
Nonmetallic Solid Wheel

121516911
VG95211-ML-121516911: RNCC: 2 | RNVC: 2
160-45017-05: RNCC: 3 | RNVC: 2
160-45017-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-3216
Mending Plate

123173216
4900064-4122.033: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-158-2112
Resilient Mount

121582112
VG95446T05H003Z: RNCC: 2 | RNVC: 2
56025013: RNCC: 3 | RNVC: 2
313069: RNCC: 5 | RNVC: 2
37G17-0045-04.001: RNCC: 5 | RNVC: 9
C40165-A373-C135: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-385-6675
Dust And Moisture Seal Protective Plug

123856675
735073010100: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-360-0988
Retaining Band

123600988
9424291640: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-138-5448
Retaining Clip

121385448
C20326-A64-C13: RNCC: 3 | RNVC: 2
C20326A64C13: RNCC: 5 | RNVC: 2
TFS70-12077: RNCC: 5 | RNVC: 9
TSEND64T13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-9269
Angle Bracket

127029269
VG95211-ML-127029269: RNCC: 2 | RNVC: 2
5.12.7616.8500.06: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-303-5832
Pipe Bracket

123035832
P-616783-013: RNCC: 3 | RNVC: 2
P616783-013: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-199-7504
Nonmetallic Bumper

121997504
60200-027: RNCC: 3 | RNVC: 2
007.1660: RNCC: 3 | RNVC: 2

26 May 1984

5340-12-363-8481
Mounting Bracket

123638481
J28630017-404: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-163-8815
Access Cover

121638815
1292053-010024: RNCC: 3 | RNVC: 2
558-0016: RNCC: 5 | RNVC: 2
1292053-010024: RNCC: 5 | RNVC: 9
558-0016: RNCC: 5 | RNVC: 9
1292053-010024: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-4035
Mounting Bracket

123834035
1354574: RNCC: 3 | RNVC: 2
1MTA-010103-00A: RNCC: 5 | RNVC: 2

15 Oct 2010

5340-12-321-8461
Metal Runner

123218461
C117-A44-C72: RNCC: 2 | RNVC: 2
C117-A44-C72: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-313-8839
Access Cover

123138839
JS1101-03: RNCC: 3 | RNVC: 2
JS1101-03: RNCC: 5 | RNVC: 2

17 May 1988

5340-12-322-5054
Mounting Bracket

123225054
810-013.00.00.00: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-194-0760
Nonmetallic Bumper

121940760
588.70-510200-007: RNCC: 3 | RNVC: 2

29 Sep 1982

5340-12-387-8255
Pipe Hanger

123878255
X59418400003: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-351-7534
Webbing Strap

123517534
81653055035: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-347-2207
Dust And Moisture Seal Protective Cap

123472207
251895010200: RNCC: 3 | RNVC: 2
251895010200: RNCC: 5 | RNVC: 2
251895010200: RNCC: 5 | RNVC: 2
0008310629: RNCC: 5 | RNVC: 2

12 Nov 1998

5340-12-388-9463
Access Cover

123889463
5840980034: RNCC: 3 | RNVC: 2

9 May 2012

5340-12-365-8534
Mechanical Stop

123658534
05130800: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-368-2501
Flush Lock

123682501
255-9851: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-12-321-8025
Access Cover

123218025
5806.2032: RNCC: 3 | RNVC: 2
409061797: RNCC: 3 | RNVC: 2
409.061 797: RNCC: 5 | RNVC: 2

28 Jun 1990

5340-12-348-0313
Double Angle Bracket

123480313
58R059-846113: RNCC: 2 | RNVC: 2
58R059-846113: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-394-0248
Blank Panel

123940248
L331M3001103: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-381-8791
Door Button

123818791
ZH 28: RNCC: 3 | RNVC: 2

14 Apr 2010

5340-12-703-3453
Mounting Bracket

127033453
VG95211-ML-127033453: RNCC: 2 | RNVC: 2
S32-6175-127G: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-313-7258
Access Cover

123137258
510252-0530.000: RNCC: 3 | RNVC: 2

29 Apr 1988

5340-12-356-2411
Bow Handle

123562411
2339-010094A00C: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-701-9671
Mounting Bracket

127019671
VG95211-ML-127019671: RNCC: 2 | RNVC: 2
01.7204.7536: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-355-9946
Access Cover

123559946
8320-0002: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-161-0235
Flush Lock

121610235
3SI1726-00-37: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-010-9048

5340-12-702-1846
Mounting Plate

127021846
VG95211-ML-127021846: RNCC: 2 | RNVC: 2
30.7206.155: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-8720
Mounting Bracket

123488720
245/7346-51-11-00: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-312-4736
Access Cover

123124736
2300013-0100.06: RNCC: 2 | RNVC: 2
2300013-0100.06: RNCC: 3 | RNVC: 2
2300013-0100.06: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-197-5239
Bridge Clamp

121975239
CF 478 142 AU: RNCC: 3 | RNVC: 2
CF 478 142 -U: RNCC: 5 | RNVC: 2
CF 478 142 AU: RNCC: 5 | RNVC: 2
CF 478 142 -U: RNCC: 5 | RNVC: 2

28 Oct 1983

5340-12-195-7990
Electrical-Mechanical Equipment Post

121957990
VG95148A6XM3X10-5.2201: RNCC: 2 | RNVC: 2
VG95148A6XM3X10-5.2201: RNCC: 3 | RNVC: 2
EL33.10: RNCC: 3 | RNVC: 9
EL33-10: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-145-0457
Retaining Strap

121450457
1212 5306: RNCC: 3 | RNVC: 2
12125306: RNCC: 5 | RNVC: 2
30.3220-08.4: RNCC: 5 | RNVC: 2
30-3220-08-4: RNCC: 5 | RNVC: 9
30.3220-08.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-8411
Lock-Release Lever

123398411
1.4677-118: RNCC: 3 | RNVC: 2
193783782: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-340-0623
Escutcheon Plate

123400623
1.63.0553.0: RNCC: 3 | RNVC: 2
1.63.553.0: RNCC: 5 | RNVC: 2

22 Feb 1996

5340-12-330-2222
Furniture Glide

123302222
5.031.012.0: RNCC: 3 | RNVC: 2

17 Nov 1992

5340-12-327-3828
Nonmetallic Bumper

123273828
23176-261000.12.0: RNCC: 2 | RNVC: 2
98407501: RNCC: 3 | RNVC: 2
23176-261000.12.0: RNCC: 3 | RNVC: 2
23176-261000.12.0: RNCC: 5 | RNVC: 2
98407501: RNCC: 5 | RNVC: 2

16 Jan 1992

5340-12-367-6861
Mounting Bracket

123676861
2300109-970197.000.0: RNCC: 3 | RNVC: 2

26 Sep 2005

5340-12-384-9822
Dust And Moisture Seal Protective Cover

123849822
1000286-381000.001.0: RNCC: 2 | RNVC: 2
1000286-381000.001.0: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-12-368-9813
Angle Bracket

123689813
7803221154AA: RNCC: 3 | RNVC: 2
1030010-721124.000.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-300-9371
Angle Bracket

123009371
1423-310.01(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-349-8293
Dust And Moisture Seal Protective Plug

123498293
RU51656: RNCC: 3 | RNVC: 2
RU51656: RNCC: 5 | RNVC: 2
0: RNCC: 5 | RNVC: 2
CAPLUG-NO 0 RED: RNCC: 5 | RNVC: 2

12 Jan 2000

5340-12-184-7228
Handle Grip

121847228
CF407658A: RNCC: 3 | RNVC: 2
CF407658A: RNCC: 5 | RNVC: 2
CF 407 658 A: RNCC: 5 | RNVC: 2
CF 407 658 A: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-321-8267
Dust And Moisture Seal Protective Cap-Plug

123218267
900A8,9: RNCC: 3 | RNVC: 2
50421600: RNCC: 5 | RNVC: 2
05728536: RNCC: 5 | RNVC: 2
9000 4135: RNCC: 5 | RNVC: 2
50421600.984: RNCC: 5 | RNVC: 9

29 Jun 1990

5340-12-374-2530
Mechanical Stop

123742530
L533M1247328: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-307-3276
Bridge Clamp

123073276
0240 5845: RNCC: 3 | RNVC: 2
02405845: RNCC: 5 | RNVC: 2
2405845EE0147-33: RNCC: 5 | RNVC: 2
02405845: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-12-323-2219
Strap Hinge

123232219
100016617: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-192-9054
Turnbuckle

121929054
PAN4531A04B0528: RNCC: 3 | RNVC: 2

3 Jun 1982

5340-12-306-0671
Butt Hinge Leaf

123060671
5801984-981721.000.0: RNCC: 2 | RNVC: 2
5801984-981721.000.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-348-1918
Catch Strike

123481918
578008.3.010.4: RNCC: 3 | RNVC: 9

4 May 1999

5340-12-186-2921
Mending Plate

121862921
CF415262A: RNCC: 3 | RNVC: 2
CF415262A: RNCC: 5 | RNVC: 2
CF 415 262 A: RNCC: 5 | RNVC: 2
CF 415 262 A: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-393-6640
Mounting Bracket

123936640
4100098-982404.000.0: RNCC: 2 | RNVC: 2
4100098-982404.000.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-198-1270
Pipe Bracket

121981270
NO PRIMARY REF 12-198-1270: RNCC: 3 | RNVC: 2
DIN41112-L35-VERNICKELT: RNCC: 5 | RNVC: 9
L35DIN41112VERNICKELT: RNCC: 5 | RNVC: 9

22 Dec 1983

5340-12-365-5886
Angle Bracket

123655886
J32320062-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-318-2909
Pipe Bracket

123182909
28.07.809.048.02: RNCC: 3 | RNVC: 2
287-809-048-020: RNCC: 5 | RNVC: 2

28 Jun 1989

5340-12-394-6189
Rim Lock

123946189
3111-0030: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-386-3296
Mechanical Stop

123863296
009-221.128-007: RNCC: 2 | RNVC: 2
009-221.128-007: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-701-9926
Loop Clamp

127019926
VG95211-ML-127019926: RNCC: 2 | RNVC: 2
155N464-419: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-362-6356
Access Cover

123626356
160-41283-15: RNCC: 3 | RNVC: 2

13 Mar 2004

5340-12-338-7997
Mending Plate

123387997
6700017-630070.01: RNCC: 2 | RNVC: 2
6700017-630070.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-184-7211
Nonmetallic Bumper

121847211
9043 3 253-01: RNCC: 3 | RNVC: 2
90433253-01: RNCC: 5 | RNVC: 2
9043 3 253-01: RNCC: 5 | RNVC: 9
90433253-01: RNCC: 5 | RNVC: 9

14 Aug 1980

5340-12-701-8486
Loop Clamp

127018486
VG95211-ML-127018486: RNCC: 2 | RNVC: 2
5166A-8-1: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-4438
Butt Hinge Leaf

121954438
P-296878-003: RNCC: 3 | RNVC: 2
P296878-003: RNCC: 5 | RNVC: 2

24 Feb 1983

5340-12-701-1744
Mounting Bracket

127011744
VG95211-ML-127011744: RNCC: 2 | RNVC: 2
5.12.0246.0061.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5705
Mounting Bracket

127025705
VG95211-ML-127025705: RNCC: 2 | RNVC: 2
5.51.7701.1520.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-305-1845
Loop Clamp

123051845
1000173-382193.000.0: RNCC: 2 | RNVC: 2
85023-00.93.00.0: RNCC: 3 | RNVC: 2
85023-00.93.00.0: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-316-3459
Nonmetallic Bumper

123163459
10032 U 26,0 MM MITTELLOCH: RNCC: 3 | RNVC: 2
DIN9835-PUR100X32X26: RNCC: 3 | RNVC: 2
2300035-200000.19: RNCC: 5 | RNVC: 9
DIN9835-PUR100X32-26MMMITTELLOCH: RNCC: 5 | RNVC: 9
2300035-200000.19: RNCC: 5 | RNVC: 9

11 Jan 1989

5340-12-197-5838
Mending Plate

121975838
A-230129-147: RNCC: 3 | RNVC: 2
A230129-147: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-166-2520
Loop Clamp

121662520
DIN3016-1-D2-13-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-13-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.13-16/15: RNCC: 3 | RNVC: 2
RSGU1100-13-16-15: RNCC: 5 | RNVC: 2
RSGU1100.13-16/15: RNCC: 5 | RNVC: 2
4219102013: RNCC: 5 | RNVC: 2
DIN3016-D2-13-16X15-W1-2: RNCC: 5 | RNVC: 9

19 Aug 1976

5340-12-356-6969
Friction Catch Stud Receptacle

123566969
027517215: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-185-0703
Angle Bracket

121850703
556-865210-020: RNCC: 3 | RNVC: 2

6 Sep 1980

5340-12-311-6814
Lock-Release Lever

123116814
02410000010S1: RNCC: 3 | RNVC: 2
520128: RNCC: 5 | RNVC: 2
02410-00: RNCC: 5 | RNVC: 9

6 Oct 1987

5340-12-199-2057
Spring Loaded Cylinder Fastener

121992057
5801435-060420.00: RNCC: 2 | RNVC: 2
5801435-060420.00: RNCC: 3 | RNVC: 2
5801435-060420.00: RNCC: 3 | RNVC: 2
5801435-060420-00: RNCC: 5 | RNVC: 2
5801435-060420-00: RNCC: 5 | RNVC: 2
5801435-060420.00: RNCC: 5 | RNVC: 9

4 Apr 1984

5340-12-300-9100
Sash Pole

123009100
4703UND4711-280MM: RNCC: 3 | RNVC: 2

11 Sep 1984

5340-12-331-9014
Webbing Strap

123319014
79017/026-1500-0460: RNCC: 3 | RNVC: 2
79017/026-1500-460: RNCC: 5 | RNVC: 2

5 Jul 1993

5340-12-303-9323
Handrail Bracket

123039323
200452: RNCC: 3 | RNVC: 2
200452: RNCC: 5 | RNVC: 2
24K03-0084-00.021: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-700-6575
Dust And Moisture Seal Protective Plug

127006575
VG95211-ML-127006575: RNCC: 2 | RNVC: 2
062.09.1013: RNCC: 3 | RNVC: 2
0501410093149: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-158-7410
Expansion Plug

121587410
DIN443-38-ST-PHR: RNCC: 2 | RNVC: 2
50140800: RNCC: 5 | RNVC: 2
38DIN443PHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-383-8880
Access Cover

123838880
601241-206500.01: RNCC: 2 | RNVC: 2
601241-206500.01: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-198-0951
Double Angle Bracket

121980951
5801411-33112.003: RNCC: 3 | RNVC: 2
5801411-33112.003: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-183-4732
Dust And Moisture Seal Protective Cap

121834732
0287 1922: RNCC: 3 | RNVC: 2
2871922: RNCC: 5 | RNVC: 2

22 Apr 1980

5340-12-338-8173
Retaining Strap

123388173
08 56 651: RNCC: 3 | RNVC: 2
90298879: RNCC: 5 | RNVC: 2
856651: RNCC: 5 | RNVC: 2

28 Aug 1995

5340-12-316-2941
Mending Plate

123162941
5183800: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-315-8275
Angle Bracket

123158275
54.0026.040.09: RNCC: 3 | RNVC: 2
54002604009: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-371-9844
Block Clamp

123719844
7005138: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-12-186-5273
Mending Plate

121865273
4030910595: RNCC: 3 | RNVC: 2

14 Jan 1981

5340-12-344-6769
Mechanic Equipment Hardware Kit

123446769
78027 61025: RNCC: 2 | RNVC: 2
7802761025: RNCC: 3 | RNVC: 2
78027 61025: RNCC: 5 | RNVC: 9

27 Nov 1997

5340-12-376-2125
Webbing Strap

123762125
07.0917.40: RNCC: 3 | RNVC: 2

26 Aug 2008

5340-12-307-6865
Electrical-Mechanical Equipment Post

123076865
RP988761: RNCC: 3 | RNVC: 2

16 Jul 1986

5340-12-381-5255
Nut And Bolt Locking Plate

123815255
105-61101.45: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-12-360-6678
Snap-In Plain Standoff

123606678
3244211902: RNCC: 3 | RNVC: 2
3244211902: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-144-4573
Retaining Strap

121444573
8381501573: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-043-3011

5340-12-043-2674

5340-12-135-7255

5340-12-352-2970
Helical Compression Spring Seat

123522970
5205388: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-370-5029
Nonmetallic Solid Wheel

123705029
3800-420: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-367-2261
Loop Clamp

123672261
191253141F: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-382-1746
Mounting Bracket

123821746
8731590140: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-302-2409
Retaining Strap

123022409
6175460344: RNCC: 3 | RNVC: 2

11 Dec 1984

5340-12-368-2833
Lock-Release Lever

123682833
11899: RNCC: 3 | RNVC: 2

8 Feb 2006

5340-12-043-8741

5340-12-300-9101
Sash Pole

123009101
4703UND4711-220MM: RNCC: 3 | RNVC: 2

11 Sep 1984

5340-12-148-3731
Resilient Mount

121483731
420-204-B-05.09: RNCC: 3 | RNVC: 2
83104701: RNCC: 3 | RNVC: 2
420-204B0509: RNCC: 5 | RNVC: 2
420-204B05-09: RNCC: 5 | RNVC: 2
420-204-B-05.09: RNCC: 5 | RNVC: 2
29E02-04-05-09: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-315-9790
Mending Plate

123159790
P-M11199-001: RNCC: 3 | RNVC: 2
PM11199-001: RNCC: 5 | RNVC: 2

10 Dec 1988

5340-12-192-6123
Mending Plate

121926123
632-761161.04.0: RNCC: 3 | RNVC: 2
632-761161-04-0: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-355-7443
Rod End Clevis

123557443
P-876418-401: RNCC: 3 | RNVC: 2
P876418-401: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-353-7184
Angle Bracket

123537184
J92224241-002: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-155-0722
Hinge Torsion Bar

121550722
786048: RNCC: 3 | RNVC: 2
75-0-23: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-154-5133
Loop Clamp

121545133
4TAN15801-3-1364-5: RNCC: 3 | RNVC: 2
4TAN15801: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-303-1620
Dust And Moisture Seal Protective Cap-Plug

123031620
T8D: RNCC: 3 | RNVC: 2
C 4098 657 25: RNCC: 5 | RNVC: 2
C 4098 657 25: RNCC: 5 | RNVC: 2

1 Mar 1985

5340-12-323-9061
Clamping Catch

123239061
14L16-1-1AA: RNCC: 3 | RNVC: 2
5L.3741.005.99: RNCC: 5 | RNVC: 2

8 Jan 1991

5340-12-175-4681
Mending Plate

121754681
PAN5506-2: RNCC: 3 | RNVC: 2

19 Sep 1978

5340-12-337-3779
Split Tubular Clip

123373779
81259370017: RNCC: 3 | RNVC: 2
81.25937.0004: RNCC: 5 | RNVC: 2
81.25937.0017: RNCC: 5 | RNVC: 2
C 265 462 380 A: RNCC: 5 | RNVC: 2
81259370004: RNCC: 5 | RNVC: 2
2 261 024 304: RNCC: 5 | RNVC: 2
2260410790: RNCC: 5 | RNVC: 2
2261024304: RNCC: 5 | RNVC: 2
C 335 002 431: RNCC: 5 | RNVC: 2
5010143086: RNCC: 5 | RNVC: 2

22 Feb 1995

5340-12-369-8949
Access Cover

123698949
6.311.098.001 (224): RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-300-9409
Mending Plate

123009409
1423-351.02(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-358-6964
Dust And Moisture Seal Protective Cap

123586964
2800-392000.016.0: RNCC: 2 | RNVC: 2
2800-392000.016.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-358-4267
Loop Clamp

123584267
4000A-800000.001.0: RNCC: 2 | RNVC: 2
4000A-800000.001.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-393-7849
Flush Catch Claw

123937849
4100098-723320.003.0: RNCC: 2 | RNVC: 2
4100098-723320.003.0: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-191-4468
Angle Bracket

121914468
1232950340: RNCC: 3 | RNVC: 2
721 1 16 035 1: RNCC: 5 | RNVC: 9

3 Feb 1982

5340-12-375-1893
Turnbuckle

123751893
L243M3012101: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-12-168-5474
Plain Solid Disk

121685474
WW 419 733 A: RNCC: 2 | RNVC: 2
WW 419 733 A: RNCC: 3 | RNVC: 2
WW 419 733 A: RNCC: 5 | RNVC: 2
WW419733A: RNCC: 5 | RNVC: 2
WW419733A: RNCC: 5 | RNVC: 2
WW 419 733 A: RNCC: 5 | RNVC: 9
WW419733A: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-701-2763
Lock-Release Lever

127012763
5.12.4901.3420.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-9747
Access Cover

123589747
2500273-324600.00.0: RNCC: 2 | RNVC: 2
2500273-324600.00.0: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-392-3292
Mounting Plate

123923292
4100095-982140.012.0: RNCC: 2 | RNVC: 2
4100095-982140.012.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-190-6693
Access Cover

121906693
ZG 8106 G 031: RNCC: 3 | RNVC: 9
ZG8106G031: RNCC: 5 | RNVC: 2
ZG8106G031: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-155-4005
Rod End Clevis

121554005
160-62162-09: RNCC: 3 | RNVC: 2
160-62162-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-8563
Loop Clamp

127008563
VG95211-ML-127008563: RNCC: 2 | RNVC: 2
155N1119-673: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-180-6344
Double Angle Bracket

121806344
C320-A62-C59: RNCC: 2 | RNVC: 2
C320A62C59: RNCC: 3 | RNVC: 2
C320-A62-C59: RNCC: 5 | RNVC: 2
C320A62C59: RNCC: 5 | RNVC: 2
C320-A62-C59: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-369-8140
Double Angle Bracket

123698140
D0046497-001: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-12-338-8581
Lock-Release Lever

123388581
763236-00: RNCC: 2 | RNVC: 2
65.7789.788.15-A002: RNCC: 3 | RNVC: 2

31 Aug 1995

5340-12-357-6599
Section Block Clamp

123576599
5232-000000-06: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-12-374-4870
Angle Bracket

123744870
353 6924-001: RNCC: 3 | RNVC: 2
353 6924-001: RNCC: 5 | RNVC: 2

21 Feb 2008

5340-12-135-6754
Butt Hinge

121356754
DIN7955-B90-ST-BK: RNCC: 2 | RNVC: 2
SB90DIN7955: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-4798
Protection Bellows

123184798
BSKV6-1008: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-12-702-6260
Butt Hinge

127026260
VG95211-ML-127026260: RNCC: 2 | RNVC: 2
76.5505.612: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-196-5159
Dust And Moisture Seal Protective Plug

121965159
500B43: RNCC: 3 | RNVC: 2
GPN500B43: RNCC: 5 | RNVC: 2
81.96002-0523: RNCC: 5 | RNVC: 2
81960020523: RNCC: 5 | RNVC: 2
500004300: RNCC: 5 | RNVC: 9
B43: RNCC: 5 | RNVC: 9
GPN500,B43: RNCC: 5 | RNVC: 9

13 Jul 1983

5340-12-143-7929
Resilient Mount

121437929
845-25082A-70X45X130-M16X35CR55S: RNCC: 3 | RNVC: 2
3754891: RNCC: 5 | RNVC: 2
8E32399-0-082: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-2352
Manual Control Handle

121862352
GN310-12-125-E: RNCC: 3 | RNVC: 2
E12X125GN310: RNCC: 5 | RNVC: 2

6 Dec 1980

5340-12-313-7904
Helical Compression Spring Retainer

123137904
1079758: RNCC: 3 | RNVC: 2
1-1683-10-4: RNCC: 5 | RNVC: 2
079758: RNCC: 5 | RNVC: 9

5 May 1988

5340-12-701-6922
Mounting Plate

127016922
VG95211-ML-127016922: RNCC: 2 | RNVC: 2
5.12.7220.2633.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-1323
Access Hole Frame

123181323
704-125115-000-0: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-701-1755
Mounting Bracket

127011755
VG95211-ML-127011755: RNCC: 2 | RNVC: 2
5.12.0246.0130.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4940
Rod End Connector

127014940
VG95211-ML-127014940: RNCC: 2 | RNVC: 2
5.12.5850.1654.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-125-1351
Retaining Strap

121251351
1740341: RNCC: 3 | RNVC: 2
0047-010: RNCC: 5 | RNVC: 2
0047010: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-2212
Angle Bracket

123072212
56.0049.790.04: RNCC: 3 | RNVC: 2
56-0049-790-04: RNCC: 5 | RNVC: 2

22 May 1986

5340-12-319-3308
Mending Plate

123193308
5803659-20200: RNCC: 2 | RNVC: 2
7802013220: RNCC: 3 | RNVC: 2
78020 13220: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-180-0398
Resilient Mount

121800398
6213020085: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-317-1813
Double Angle Bracket

123171813
4606820086: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-364-1553
Mounting Bracket

123641553
64415046: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-050-0777

5340-12-327-1695
Swivel Caster

123271695
6.435-071.0: RNCC: 3 | RNVC: 2
6.435-071: RNCC: 5 | RNVC: 9
6-435-071: RNCC: 5 | RNVC: 9

10 Dec 1991

5340-12-190-7178
Extension Drawer Slide Section

121907178
NO PRIMARY REF 12-190-7178: RNCC: 3 | RNVC: 2
6935 132724: RNCC: 5 | RNVC: 9
6935132724: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-341-1503
Double Angle Bracket

123411503
P-297201-003: RNCC: 3 | RNVC: 2
P297201-003: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-12-330-2252
Access Cover

123302252
6600153-982115.001.0: RNCC: 2 | RNVC: 2
6600153-982115.001.0: RNCC: 3 | RNVC: 2

18 Nov 1992

5340-12-324-0558
Metal Runner

123240558
1.220.841.0: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-12-187-8945
Helical Compression Spring Seat

121878945
1460500003: RNCC: 3 | RNVC: 2
1 460 500 003: RNCC: 5 | RNVC: 2
7701011352: RNCC: 5 | RNVC: 2
7701011352: RNCC: 5 | RNVC: 9

18 May 1981

5340-12-391-0389
Mounting Bracket

123910389
2300559-820115.000.0: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-394-3353
Mounting Bracket

123943353
1002677-7: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-12-187-0301
Ball Socket Seat

121870301
3192670005: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-349-6606
Dust And Moisture Seal Protective Cap

123496606
63 12 2 306 376: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-389-3679
Door Handle

123893679
10222-181836.000.0: RNCC: 2 | RNVC: 2
10222-181836.000.0: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-12-356-4563
Metallic Solid Wheel

123564563
2500262-990210.002.0: RNCC: 2 | RNVC: 2
2500262-990210.002.0: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-385-7973
Mounting Plate

123857973
2500262-531000.028.0: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-12-319-2059
Mending Plate

123192059
4900064-412272: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-12-328-9799
Turnbuckle Body

123289799
LN29601C14-1010: RNCC: 2 | RNVC: 2
36X1X1010M12X1-5LN29601: RNCC: 5 | RNVC: 2

4 Jul 1992

5340-12-322-3988
Dust And Moisture Seal Protective Cap

123223988
295 083-BRAUN: RNCC: 3 | RNVC: 2
9000 9223: RNCC: 5 | RNVC: 2

17 Aug 1990

5340-12-309-4612
Mending Plate

123094612
5803457-3000.01: RNCC: 2 | RNVC: 2
7802085301: RNCC: 3 | RNVC: 2
78020 85301: RNCC: 5 | RNVC: 9

27 Jan 1987

5340-12-329-0189
Bow Handle

123290189
R04148-101: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-12-700-1846
Mounting Bracket

127001846
765-14-81: RNCC: 2 | RNVC: 2

31 Oct 1991

5340-12-306-3072
Handrail Bracket

123063072
6100135-1530: RNCC: 2 | RNVC: 2
4002011218: RNCC: 3 | RNVC: 2

18 Feb 1986

5340-12-321-6028
Double Angle Bracket

123216028
372250: RNCC: 3 | RNVC: 2
2500073-1006.02: RNCC: 5 | RNVC: 9

6 Jun 1990

5340-12-135-7160
Rod End Clevis

121357160
1204 6042: RNCC: 3 | RNVC: 2
31.3013-69.4: RNCC: 5 | RNVC: 2
12046042: RNCC: 5 | RNVC: 2
31-3013-69-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-6189
Rod End Connector

123936189
A-0261-004-06: RNCC: 3 | RNVC: 2

27 Sep 2013

5340-12-321-4665
Metallic Bumper

123214665
7068-12720-004-2: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-701-7833
Mounting Bracket

127017833
VG95211-ML-127017833: RNCC: 2 | RNVC: 2
5.12.7801.1010.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-7095
Mounting Bracket

123607095
000611-244100.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-152-3144
Retaining Strap

121523144
5800400-0820-002: RNCC: 3 | RNVC: 2
6P358-836-2: RNCC: 5 | RNVC: 2
5800400-0820-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7067
Mounting Plate

127017067
VG95211-ML-127017067: RNCC: 2 | RNVC: 2
5.12.7240.3012.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-9360
Rod End Clevis

123599360
2500261-183430.001.0: RNCC: 2 | RNVC: 2
2500261-183430.001.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-700-8692
Loop Clamp

127008692
VG95211-ML-127008692: RNCC: 2 | RNVC: 2
155N464-4-K: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-4912
Mounting Bracket

123384912
465-068520.000: RNCC: 3 | RNVC: 2
9 890 437: RNCC: 5 | RNVC: 2

18 Jul 1995

5340-12-316-2473
Escutcheon Plate

123162473
NO PRIMARY REF 12-316-2473: RNCC: 3 | RNVC: 2
M/6315/0/4: RNCC: 5 | RNVC: 9

4 Jan 1989

5340-12-345-2774
Mounting Bracket

123452774
39-2117-000100.003.0: RNCC: 2 | RNVC: 2
39-2117-000100.003.0: RNCC: 3 | RNVC: 2

24 Feb 1998

5340-12-391-7438
Loop Clamp

123917438
DIN3016-1-D1-50X25-W1-2-NBR: RNCC: 2 | RNVC: 2

3 Apr 2013

5340-12-339-7035
Nonmetallic Bumper

123397035
2500255-000400.007.0: RNCC: 2 | RNVC: 2
2500255-000400.007.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-170-8550
Compression Cup

121708550
H320-1-88NBR/101: RNCC: 3 | RNVC: 2
H320-1-88NBR101: RNCC: 5 | RNVC: 2

17 Aug 1977

5340-12-150-9295
Retaining Clip

121509295
C20136-A14-C515: RNCC: 3 | RNVC: 2
C20136A14C515: RNCC: 5 | RNVC: 2
TFS72-54515: RNCC: 5 | RNVC: 9
TDRUCK4T1515: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-4100
Metal Runner

121944100
66.3851.105.02-A001: RNCC: 3 | RNVC: 2
161360: RNCC: 5 | RNVC: 2
66-3851-105-02A001: RNCC: 5 | RNVC: 9

3 Nov 1982

5340-12-309-3903
Snap Hook

123093903
VE01215-1: RNCC: 3 | RNVC: 2
01215-1: RNCC: 5 | RNVC: 2
H01215-1 0037 00: RNCC: 5 | RNVC: 2
028251: RNCC: 5 | RNVC: 2
HV-134: RNCC: 5 | RNVC: 2
HV-134: RNCC: 5 | RNVC: 9

21 Jan 1987

5340-12-344-4239
Angle Bracket

123444239
A-616776-001: RNCC: 3 | RNVC: 2
A616776-001: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-343-9495
Spacing Threaded Standoff

123439495
C41107-A467-C357: RNCC: 3 | RNVC: 2
35627125: RNCC: 3 | RNVC: 2
C41107A467C357: RNCC: 5 | RNVC: 2
VG95148C5,5XM3X17,6-NRST: RNCC: 5 | RNVC: 2

19 Aug 1997

5340-12-141-3306
Support Hook

121413306
3210011: RNCC: 3 | RNVC: 2
7101-70-01.08: RNCC: 5 | RNVC: 2
49035: RNCC: 5 | RNVC: 2
7101-70-01-08: RNCC: 5 | RNVC: 2
163692701: RNCC: 5 | RNVC: 2
7101-70-01.08: RNCC: 5 | RNVC: 9
2509FKUE603-042: RNCC: 5 | RNVC: 9
7101-70-01-08: RNCC: 5 | RNVC: 9
931-1: RNCC: 5 | RNVC: 9
931/0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-9738
Bow Handle

123009738
1000091-4000.06: RNCC: 2 | RNVC: 2
GN-565-26-128-SW: RNCC: 5 | RNVC: 2
1000091-4000.06: RNCC: 5 | RNVC: 2

14 Sep 1984

5340-12-325-7593
Schlosz Schluessel

123257593
SCHLUESSEL 4010LI-BC0264: RNCC: 3 | RNVC: 2
BC0264: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-323-1835
Multiple Angle Bracket

123231835
42081891: RNCC: 3 | RNVC: 2
42081891ED50-3125: RNCC: 5 | RNVC: 2

30 Oct 1990

5340-12-321-3813
Retaining Strap

123213813
5801846-1131.002: RNCC: 2 | RNVC: 2
5801846-1131.002: RNCC: 3 | RNVC: 2

11 May 1990

5340-12-302-5160
Resilient Mount

123025160
DIN95363-A70X45-M10X13-M10X23NR: RNCC: 2 | RNVC: 2
81100-70X45-M10X13-M10X23NR60.ST: RNCC: 5 | RNVC: 2
595-564.00-95: RNCC: 5 | RNVC: 2
5955640095: RNCC: 5 | RNVC: 2
595-564.00-95: RNCC: 5 | RNVC: 9
5955640095: RNCC: 5 | RNVC: 9
VG95363-A70X45-M10X13-M10X23NR60: RNCC: 5 | RNVC: 9

9 Jan 1985

5340-12-329-7103
Loop Clamp

123297103
R315: RNCC: 3 | RNVC: 2
R0464: RNCC: 5 | RNVC: 2
51.97401-6063: RNCC: 5 | RNVC: 2
51.97401-6037: RNCC: 5 | RNVC: 2
51974016037: RNCC: 5 | RNVC: 2
R0464C: RNCC: 5 | RNVC: 9

22 Sep 1992

5340-12-311-3051
Ball Socket Seat

123113051
DIN71804-C13-ZNPHRF: RNCC: 3 | RNVC: 2
DIN71804-C13-A3P: RNCC: 5 | RNVC: 9
DIN71804-C13-ZNPHRF: RNCC: 5 | RNVC: 9

14 Aug 1987

5340-12-390-7209
Mounting Plate

123907209
X58320200004: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-12-300-8484
Retaining Strap

123008484
4254030005: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-334-2753
Bow Handle

123342753
P209277700603062: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-12-143-4223
Spring Tension Clip

121434223
TWH1069: RNCC: 3 | RNVC: 2
TWH1069: RNCC: 5 | RNVC: 2
TWH1069: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-1450
Manual Control Handle

121951450
54.2895.002.86: RNCC: 3 | RNVC: 2

17 Jan 1983

5340-12-300-4026
Leather Strap

123004026
4258900194: RNCC: 3 | RNVC: 2

28 Jul 1984

5340-12-094-9749

5340-12-358-6963
Dust And Moisture Seal Protective Cover

123586963
2481-392450.000.0: RNCC: 2 | RNVC: 2
2481-392450.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-344-4026
Mounting Plate

123444026
2300436-240012.000.0: RNCC: 2 | RNVC: 2
2300436-240012.000.0: RNCC: 3 | RNVC: 2

23 Oct 1997

5340-12-198-7165
Dust And Moisture Seal Protective Plug

121987165
JJ53067: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-327-6729
Retaining Strap

123276729
A11A742420131: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-12-327-4429
Access Cover

123274429
6887618: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-360-0991
Mounting Bracket

123600991
9424296140: RNCC: 3 | RNVC: 2

7 Apr 2003

Load More Results