What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 92 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 92 of 178

5340-12-132-8069
Retaining Strap

121328069
6.253.0.977.003.4: RNCC: 3 | RNVC: 9
6-253-0-977-003-4: RNCC: 5 | RNVC: 9
KD4-18611: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-5249
Loop Clamp

123295249
DIN3015-L-KP-5-R-25-PP: RNCC: 2 | RNVC: 2
RAPR-525: RNCC: 3 | RNVC: 2
525PP: RNCC: 3 | RNVC: 2
HRL5KP25PP: RNCC: 3 | RNVC: 2
RAPR-525: RNCC: 5 | RNVC: 2

27 Aug 1992

5340-12-332-8527
Elastic Strap

123328527
752-201100-00-0: RNCC: 3 | RNVC: 2

27 Sep 1993

5340-12-362-2783
Mending Plate

123622783
0328142030: RNCC: 3 | RNVC: 2
3KK905: RNCC: 5 | RNVC: 2
03.281.42.03.0: RNCC: 5 | RNVC: 2

2 Feb 2004

5340-12-335-5348
Mounting Bracket

123355348
6020720540: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-183-1031
Angle Bracket

121831031
02486379: RNCC: 3 | RNVC: 2
2486379EE5048-75: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-184-7135
Clamp Bolt Assembly

121847135
5564841: RNCC: 3 | RNVC: 2

14 Aug 1980

5340-12-343-2475
Loop Clamp

123432475
N10258101: RNCC: 3 | RNVC: 2

22 May 1997

5340-12-366-5230
Mounting Bracket

123665230
2 0067-376: RNCC: 3 | RNVC: 2
2 0067-376: RNCC: 5 | RNVC: 2

3 May 2005

5340-12-377-1017
Cushioning Pad

123771017
1030027-972370.002.0: RNCC: 3 | RNVC: 2
1030027-972370.002.0: RNCC: 5 | RNVC: 2

11 Dec 2008

5340-12-349-8201
Verriegelun Buegel

123498201
52 53 2 313 419: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-196-9535
Double Angle Bracket

121969535
A-295057-019: RNCC: 3 | RNVC: 2
A295057-019: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-702-5409
Mounting Bracket

127025409
VG95211-ML-127025409: RNCC: 2 | RNVC: 2
5.51.7209.0008.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-5999
Retaining Strap

123155999
DIN3016-1-F1-69X25-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-69X25-W5: RNCC: 3 | RNVC: 2
RSGU2.69/25-W5: RNCC: 3 | RNVC: 2
67210385: RNCC: 5 | RNVC: 2
DIN3016-F1-69X25-W5: RNCC: 5 | RNVC: 9
VG95931F69X25W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-347-6101
Webbing Strap

123476101
002-000/0100-0-013A: RNCC: 3 | RNVC: 2
10-12BN/406: RNCC: 5 | RNVC: 2
10-12BN/407: RNCC: 5 | RNVC: 2

14 Jan 1999

5340-12-186-6987
Bridge Clamp

121866987
2300109-059130-003-0: RNCC: 3 | RNVC: 2
2300109-059130.003.0: RNCC: 3 | RNVC: 2
2300109-059130-003-0: RNCC: 5 | RNVC: 9
2300109-059130.003.0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-349-1907
Metal Grille

123491907
88521 15474: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-349-6207
Helical Compression Spring Seat

123496207
11 34 1 340 919: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-12-325-6262
Angle Bracket

123256262
5801984-981110.003.0: RNCC: 2 | RNVC: 2
5801984-981110.003.0: RNCC: 3 | RNVC: 2

24 Jun 1991

5340-12-322-3907
Bow Handle

123223907
4608100254: RNCC: 3 | RNVC: 2
721 1 83 604 0: RNCC: 3 | RNVC: 9
46081002549007: RNCC: 5 | RNVC: 2

17 Aug 1990

5340-12-327-3758
Runner

123273758
81671656034: RNCC: 2 | RNVC: 2
81671656034: RNCC: 3 | RNVC: 2
81.67165.6034: RNCC: 5 | RNVC: 2

16 Jan 1992

5340-12-387-0765
Double Angle Bracket

123870765
5242033040: RNCC: 3 | RNVC: 2

3 Nov 2011

5340-12-002-1132

5340-12-135-6832

5340-12-340-2640
Retaining Strap

123402640
177M56007: RNCC: 3 | RNVC: 2
177M56007 F1: RNCC: 5 | RNVC: 2

20 Mar 1996

5340-12-365-9312
Manual Control Handle

123659312
5.034-542.0: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-389-3807
Mounting Bracket

123893807
1.315-200000.01: RNCC: 2 | RNVC: 2
1.315-200000.01: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-12-331-2885
Rigid Caster

123312885
8 109 126: RNCC: 3 | RNVC: 2

16 Apr 1993

5340-12-161-9428
Resilient Mount

121619428
0118040/11MN60: RNCC: 3 | RNVC: 2
0118040.60: RNCC: 5 | RNVC: 2
011804015: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-179-5087
Nonmetallic Bumper

121795087
82200-FT474/81.307/011.NR55: RNCC: 3 | RNVC: 2
FT474/81.307/011-FLCN5590: RNCC: 3 | RNVC: 2
FT474-81-307-011: RNCC: 5 | RNVC: 2
0002411513: RNCC: 5 | RNVC: 2
FT474/81.307/011: RNCC: 5 | RNVC: 9

4 Jul 1979

5340-12-332-4192
Double Angle Bracket

123324192
480-7345-02-10-00-28: RNCC: 3 | RNVC: 2
480/7345-02-10-00-28: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-339-8637
Mounting Plate

123398637
87-401.50-00.00-15: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-004-0157

5340-12-005-1103

5340-12-002-1183

5340-12-340-6905
Webbing Strap

123406905
704-129112-902-0: RNCC: 3 | RNVC: 2

23 May 1996

5340-12-701-9587
Rod End Clevis

127019587
VG95211-ML-127019587: RNCC: 2 | RNVC: 2
5.12.8101.2920.00: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-347-5855
Permanent Magnet

123475855
6.686-040.0: RNCC: 3 | RNVC: 2
6.686-040: RNCC: 5 | RNVC: 9

11 Jan 1999

5340-12-191-6206
Nonmetallic Bumper

121916206
1-213-008-3433: RNCC: 3 | RNVC: 9
02982531: RNCC: 5 | RNVC: 2

16 Feb 1982

5340-12-163-9105
Nonmetallic Bumper

121639105
554 904: RNCC: 3 | RNVC: 2
80NO17110: RNCC: 5 | RNVC: 2
80NO17110N: RNCC: 5 | RNVC: 2
NO 17110-080N: RNCC: 5 | RNVC: 2
80N017110: RNCC: 5 | RNVC: 2
83103-80NO17110.N: RNCC: 5 | RNVC: 2
80NO16951: RNCC: 5 | RNVC: 2
554904: RNCC: 5 | RNVC: 2
924.10.06.0: RNCC: 5 | RNVC: 9
924.10.060: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5181
Retaining Strap

127025181
VG95211-ML-127025181: RNCC: 2 | RNVC: 2
5.51.6501.1700.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-322-7812
Angle Bracket

123227812
42107040: RNCC: 3 | RNVC: 2
4210 7040EC50-3443: RNCC: 5 | RNVC: 2

21 Sep 1990

5340-12-701-2492
Mounting Bracket

127012492
VG95211-ML-127012492: RNCC: 2 | RNVC: 2
5.12.3600.8250.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-9316
Flush Bolt

123819316
5371-140100A15K: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-12-195-2608
Dust And Moisture Seal Protective Cap

121952608
PAN3861-06: RNCC: 3 | RNVC: 2

31 Jan 1983

5340-12-361-6241
Loop Clamp

123616241
DIN3015-ZH2R-16-18-PA-W5: RNCC: 2 | RNVC: 2

27 Oct 2003

5340-12-364-6648
Access Door Hinge

123646648
2500306-190900.004.0: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-147-2023
Retaining Strap

121472023
BSN20X20X2ZWL: RNCC: 3 | RNVC: 2
2376-7000-28: RNCC: 5 | RNVC: 2
0082130000: RNCC: 5 | RNVC: 2
15210000020: RNCC: 5 | RNVC: 2
5210000020: RNCC: 5 | RNVC: 2
BSN20X20X2ZWEILASCHIG: RNCC: 5 | RNVC: 2
0082130000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-352-6321
Webbing Strap

123526321
8310-0004: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-308-1887
Dust And Moisture Seal Protective Plug

123081887
700M26X1,5: RNCC: 3 | RNVC: 2
779008977: RNCC: 5 | RNVC: 2
GPN700-AM26X1,5: RNCC: 5 | RNVC: 2
700AM26X1-5: RNCC: 5 | RNVC: 2
GPN700AM26X1-5: RNCC: 5 | RNVC: 2
GPN700,M26X1,5 F.A.: RNCC: 5 | RNVC: 9
700261500: RNCC: 5 | RNVC: 9
GPN700,M26X1,5 FORM A: RNCC: 5 | RNVC: 9

11 Sep 1986

5340-12-185-3490
Retaining Strap

121853490
02-0899-180350-01-0: RNCC: 3 | RNVC: 2

30 Sep 1980

5340-12-362-3833
Manual Control Handle

123623833
2500261-993213.000.0: RNCC: 2 | RNVC: 2
2500261-993213.000.0: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-12-391-4132
Runner

123914132
3080675: RNCC: 3 | RNVC: 2
03080675: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-12-174-6107
Platte

121746107
610186RE: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-12-183-1033
Mounting Bracket

121831033
42022212: RNCC: 3 | RNVC: 2
42022212EZ5048-75: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-372-1837
Nonmetallic Bumper

123721837
L524M1019214: RNCC: 3 | RNVC: 2

25 Jun 2007

5340-12-375-4454
Dust And Moisture Seal Protective Cap

123754454
T15118: RNCC: 3 | RNVC: 2

3 Jun 2008

5340-12-393-6499
Mounting Bracket

123936499
122W161680.005.0: RNCC: 2 | RNVC: 2
122W161680.005.0: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-12-363-5148
Butt Hinge Leaf

123635148
1030020-185920.000.0: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-335-4721
Electronic Equipment Hardware Kit

123354721
8 695 720 741: RNCC: 3 | RNVC: 2

22 Aug 1994

5340-12-320-3821
Retaining Band

123203821
4900059-751540.005.0: RNCC: 3 | RNVC: 2
1503497: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-365-3914
Mounting Bracket

123653914
2500075-730203.002.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-379-8907
Angle Bracket

123798907
120D152300.005.0: RNCC: 2 | RNVC: 2
120D152300.005.0: RNCC: 3 | RNVC: 2

10 Sep 2009

5340-12-162-4783
Cremone Bolt

121624783
4-63316: RNCC: 3 | RNVC: 2
144548: RNCC: 5 | RNVC: 2
4-63316: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-5373
Mending Plate

123055373
CF 482 208 B: RNCC: 3 | RNVC: 2
CF 482 208 B: RNCC: 5 | RNVC: 2
CF 482 208 A: RNCC: 5 | RNVC: 9
CF 482 208 A: RNCC: 5 | RNVC: 9

19 Nov 1985

5340-12-388-9762
Retaining Bail

123889762
122W167170.000.0: RNCC: 2 | RNVC: 2
122W167170.000.0: RNCC: 3 | RNVC: 2

11 May 2012

5340-12-701-1974
Mounting Bracket

127011974
5.12.0602.8152.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-7881
Runner

123587881
3855400773: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-181-1728
Mounting Bracket

121811728
582K0028-1: RNCC: 3 | RNVC: 2
0007661069: RNCC: 5 | RNVC: 2

29 Oct 1979

5340-12-342-2645
Helical Compression Spring Seat

123422645
008525 520 08 10 01: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-12-353-9263
Detent Plunger

123539263
0000170974: RNCC: 3 | RNVC: 2
0000170974: RNCC: 5 | RNVC: 2
0000170974: RNCC: 5 | RNVC: 2
000 017 09 74: RNCC: 5 | RNVC: 2

18 May 2001

5340-12-186-5355
Electrical-Mechanical Equipment Post

121865355
MB0887964: RNCC: 3 | RNVC: 2

14 Jan 1981

5340-12-191-7362
Spring Tension Clip

121917362
1235040246: RNCC: 3 | RNVC: 2

1 Mar 1982

5340-12-329-0211
Webbing Strap

123290211
2950-520.00: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-12-303-8545
Pipe Bracket

123038545
AB 40065: RNCC: 3 | RNVC: 2
AB 40065: RNCC: 5 | RNVC: 2

9 May 1985

5340-12-181-3527
Mending Plate

121813527
3537528708: RNCC: 3 | RNVC: 2
35375 28708: RNCC: 5 | RNVC: 9

14 Nov 1979

5340-12-351-7697
Expansion Shield

123517697
250-706: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-091-2522

5340-12-192-5519
Shimmy Damper

121925519
CF 447 170: RNCC: 3 | RNVC: 2
CF447170: RNCC: 5 | RNVC: 2
CF 447 170: RNCC: 5 | RNVC: 2
CF447170: RNCC: 5 | RNVC: 2
CF447170: RNCC: 5 | RNVC: 2

4 May 1982

5340-12-043-3089

5340-12-043-2715

5340-12-197-9123
Angle Bracket

121979123
CF 339 011 B: RNCC: 3 | RNVC: 2
CF 339 011 A: RNCC: 5 | RNVC: 2
CF 339 011 A: RNCC: 5 | RNVC: 2
CF 339 011 B: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-334-3366
Extension Drawer Slide

123343366
1.019.400.7: RNCC: 3 | RNVC: 2

28 Apr 1994

5340-12-340-5786
Buckle

123405786
P20568NM: RNCC: 3 | RNVC: 2
P 20568 NM: RNCC: 5 | RNVC: 2
P20 568 NM: RNCC: 5 | RNVC: 2

7 May 1996

5340-12-333-5724
Access Door

123335724
6 001 466: RNCC: 3 | RNVC: 2
6001466: RNCC: 5 | RNVC: 2

6 Jan 1994

5340-12-324-9436
Filler Opening Cap

123249436
0.1200.2.02: RNCC: 3 | RNVC: 2
79.290.400: RNCC: 5 | RNVC: 2

12 Apr 1991

5340-12-372-5478
Retaining Clip

123725478
026109150A: RNCC: 3 | RNVC: 2
026 109 150 A: RNCC: 5 | RNVC: 2

26 Jul 2007

5340-12-381-4531
Adapter

123814531
Z=30384: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-191-2423
Metal Runner

121912423
0994359: RNCC: 3 | RNVC: 2
75D10.11.40-4: RNCC: 5 | RNVC: 2

19 Jan 1982

5340-12-393-8554
Swivel Caster

123938554
LH-ALEV125K-1-ST: RNCC: 3 | RNVC: 2
4047526612382: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-359-4610
Bow Handle

123594610
2300397-970107.000.0: RNCC: 3 | RNVC: 2
5120700108: RNCC: 5 | RNVC: 2

6 Feb 2003

5340-12-303-3615
Handle Grip

123033615
714-001300-919-0: RNCC: 3 | RNVC: 2
714-001300-919-0: RNCC: 5 | RNVC: 2
37L33-1-1AA: RNCC: 5 | RNVC: 9

18 Mar 1985

5340-12-336-0810
Spacing Threaded Standoff

123360810
VG95148C5,5XM3X25-NRST: RNCC: 2 | RNVC: 2
H61550-C3250-R865: RNCC: 3 | RNVC: 2
VG95148-C5,5XM3X25-NRST: RNCC: 3 | RNVC: 2
SN61550-CM3X25-A2-70-F: RNCC: 5 | RNVC: 2
SN61550-CM3X25-A2-70: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-12-701-7971
Mounting Plate

127017971
VG95211-ML-127017971: RNCC: 2 | RNVC: 2
5.12.8102.2576.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-167-2855
Catch Strike

121672855
66.3523.300.04-A001: RNCC: 3 | RNVC: 2
66-3523-300-04A001: RNCC: 5 | RNVC: 2
C22123-Z83-C5: RNCC: 5 | RNVC: 2

8 Dec 1976

5340-12-194-8606
Resilient Mount

121948606
3347147EE5062-57: RNCC: 3 | RNVC: 2
E33045269: RNCC: 5 | RNVC: 2
03347147: RNCC: 5 | RNVC: 2
3347147EE5062-57: RNCC: 5 | RNVC: 2
33045269: RNCC: 5 | RNVC: 2
334-7147EE5062-57: RNCC: 5 | RNVC: 9
330 45 269: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-12-190-5657
Mounting Bracket

121905657
1641352: RNCC: 3 | RNVC: 2
1641-352: RNCC: 5 | RNVC: 2
8474888: RNCC: 5 | RNVC: 2
3-1641-352: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-361-7896
Loop Clamp

123617896
DIN3016-D1-22X15-W5: RNCC: 2 | RNVC: 2
RSGU1.22/15-W5: RNCC: 3 | RNVC: 2
103170: RNCC: 5 | RNVC: 2

18 Nov 2003

5340-12-367-9527
Webbing Strap

123679527
SR 220-872/LT0.8M: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-300-7988
Angle Bracket

123007988
23114-3040.03: RNCC: 2 | RNVC: 2
23114-3040.03: RNCC: 3 | RNVC: 2
23114-3040-03: RNCC: 5 | RNVC: 9
23114-3040-03: RNCC: 5 | RNVC: 9
23114-3040.03: RNCC: 5 | RNVC: 9
23114-3040.03: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-188-8703
Resilient Mount

121888703
DIN95363-C40X50-M10-NR55ST: RNCC: 2 | RNVC: 2
520000-40X50-M10.NR55.ST: RNCC: 5 | RNVC: 2
AK9-00: RNCC: 5 | RNVC: 9
AK9.00: RNCC: 5 | RNVC: 9
AK9.00-25N: RNCC: 5 | RNVC: 9
VG95363-C40X50-M10-NR55ST: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-12-301-6124
Dust And Moisture Seal Protective Plug

123016124
80385720301C: RNCC: 3 | RNVC: 2
803857203-01C: RNCC: 5 | RNVC: 2

26 Oct 1984

5340-12-370-4209
Access Cover

123704209
491-190010.004: RNCC: 2 | RNVC: 2
491-190010.004: RNCC: 3 | RNVC: 2

6 Nov 2006

5340-12-004-0654

5340-12-192-6499
Headless Straight Rod

121926499
02-0899-181100.01.0: RNCC: 3 | RNVC: 2
02-0899-181100-01-0: RNCC: 5 | RNVC: 2

12 May 1982

5340-12-365-3722
Mounting Bracket

123653722
2300397-183230.001.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-371-5488
Double Angle Bracket

123715488
2300425-192540.000.0: RNCC: 3 | RNVC: 2
1589661: RNCC: 5 | RNVC: 9

17 Apr 2007

5340-12-164-3329
Resilient Mount

121643329
DIN95363-A20X15-M6X15-NR55+/-3S: RNCC: 2 | RNVC: 2
500021-M6X15.NR55+/-3.ST: RNCC: 5 | RNVC: 2
8064-097: RNCC: 5 | RNVC: 2
8064097: RNCC: 5 | RNVC: 2
8430735: RNCC: 5 | RNVC: 2
AE3-22-15C: RNCC: 5 | RNVC: 9
VG95363-A20X15-M6X15-NR55+/-3ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-2627
Mending Plate

123032627
P-886742-003: RNCC: 3 | RNVC: 2
P886742-003: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-317-4187
Angle Bracket

123174187
P-145502-060: RNCC: 3 | RNVC: 2
P145502-060: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-374-6757
Helical Compression Spring Seat

123746757
SK950-162710.001.0: RNCC: 3 | RNVC: 2

6 Mar 2008

5340-12-315-0787
Loop Clamp

123150787
DIN3015-LB-K-1R-12-PP-W1: RNCC: 2 | RNVC: 2
HRL1B12PP STMBL: RNCC: 3 | RNVC: 2
RAPR2-112: RNCC: 3 | RNVC: 2
SP112A-PP-IS: RNCC: 3 | RNVC: 2
RAPR2-112: RNCC: 5 | RNVC: 2
HR1LB12.0/1: RNCC: 5 | RNVC: 2
DIN3015-LB1R-12PP-W1-K: RNCC: 5 | RNVC: 2
SP112A-PP-IS: RNCC: 5 | RNVC: 2

14 Sep 1988

5340-12-170-9908
Dust And Moisture Seal Protective Cap

121709908
81964100180: RNCC: 3 | RNVC: 2
81.96410-0180: RNCC: 5 | RNVC: 2
02822051: RNCC: 5 | RNVC: 2
2822051EE7103-02: RNCC: 5 | RNVC: 2
23230-022001-004-0: RNCC: 5 | RNVC: 9
23230-022001.004.0: RNCC: 5 | RNVC: 9

29 Aug 1977

5340-12-186-0428
Expansion Shield

121860428
9-50: RNCC: 3 | RNVC: 9
00110011: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-361-4161
Access Cover

123614161
8-01 200.00: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-301-9487
Helical Compression Spring Retainer

123019487
4-141861: RNCC: 3 | RNVC: 2

21 Nov 1984

5340-12-702-4608
Mounting Bracket

127024608
VG95211-ML-127024608: RNCC: 2 | RNVC: 2
5.51.0603.1010.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-183-2028
Retaining Strap

121832028
2760101: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-367-1679
Webbing Strap

123671679
01155-2-01422-1,4M: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-12-195-4028
Loop Clamp

121954028
96364044: RNCC: 3 | RNVC: 2

21 Feb 1983

5340-12-393-2428
Mechanical Stop

123932428
4100098-722030.005.0: RNCC: 2 | RNVC: 2
4100098-722030.005.0: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-12-337-8245
Angle Bracket

123378245
731.42.202: RNCC: 3 | RNVC: 2
461 840 04 14: RNCC: 3 | RNVC: 2
4618400414: RNCC: 5 | RNVC: 2

19 Apr 1995

5340-12-322-1166
Mounting Bracket

123221166
9000 8166: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-192-3084
Hasp Staple

121923084
3494: RNCC: 3 | RNVC: 2

13 Apr 1982

5340-12-347-3611
Nonmetallic Bumper

123473611
2125-111300.16B: RNCC: 2 | RNVC: 2
2125-111300.16B: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-330-6112
Clamping Catch

123306112
984.000.0004: RNCC: 3 | RNVC: 2
984 000 0004: RNCC: 5 | RNVC: 2
88-1068: RNCC: 5 | RNVC: 9

18 Jan 1993

5340-12-305-2824
Angle Bracket

123052824
5801758-1800.01: RNCC: 2 | RNVC: 2
5801758-1800.01: RNCC: 3 | RNVC: 2

16 Oct 1985

5340-12-304-0508
Dust And Moisture Seal Protective Cap

123040508
320271: RNCC: 3 | RNVC: 2
7102-0016-320271: RNCC: 5 | RNVC: 2

4 Jun 1985

5340-12-388-3798
Rod End Clevis

123883798
U100-3422-004: RNCC: 2 | RNVC: 2
U100-3422-004: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-12-702-1997
Mounting Bracket

127021997
VG95211-ML-127021997: RNCC: 2 | RNVC: 2
30.7210.570.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-043-2709

5340-12-391-8193
Access Cover

123918193
I001871TAN686A: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-12-300-4027
Double Angle Bracket

123004027
4258300014: RNCC: 3 | RNVC: 2
425 830 00 14: RNCC: 5 | RNVC: 2

28 Jul 1984

5340-12-300-3139
Double Angle Bracket

123003139
4065810040: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-349-1865
Rope Cleat

123491865
SN22: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-349-7667
Multiple Angle Bracket

123497667
0044-602100A14B: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-364-2049
Double Angle Bracket

123642049
4273310140: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-130-3530

5340-12-150-9077
Mending Plate

121509077
BD2E22: RNCC: 3 | RNVC: 9
BD0002E022: RNCC: 5 | RNVC: 2
BD0002E022: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-179-3000
Butt Hinge Leaf

121793000
3816890352: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-386-0705
Mounting Bracket

123860705
869104701: RNCC: 3 | RNVC: 2

5 Aug 2011

5340-12-185-0285
Angle Bracket

121850285
CF486930: RNCC: 3 | RNVC: 2
CF 486 930: RNCC: 5 | RNVC: 2
CF486930: RNCC: 5 | RNVC: 2
CF 486 930: RNCC: 5 | RNVC: 2

4 Sep 1980

5340-12-184-9969
Mending Plate

121849969
CF455459: RNCC: 3 | RNVC: 2
CF455459: RNCC: 5 | RNVC: 2
CF 455 459: RNCC: 5 | RNVC: 2
CF 455 459: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-302-5532
Mending Plate

123025532
YK03240840: RNCC: 3 | RNVC: 2
03240840: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 24 0840: RNCC: 5 | RNVC: 9

11 Jan 1985

5340-12-341-7188
Helical Compression Spring Seat

123417188
1460522304: RNCC: 3 | RNVC: 2
1460522304: RNCC: 5 | RNVC: 2
1 460 522 304: RNCC: 5 | RNVC: 2
146052204: RNCC: 5 | RNVC: 2
1460522304: RNCC: 5 | RNVC: 2
146052304: RNCC: 5 | RNVC: 2
CBU1934: RNCC: 5 | RNVC: 2

18 Oct 1996

5340-12-300-8732
Double Angle Bracket

123008732
1423-320.05(4): RNCC: 3 | RNVC: 2

6 Sep 1984

5340-12-354-4421
Access Cover

123544421
4NG2182916AUSF.1: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-703-3037
Mending Plate

127033037
VG95211-ML-127033037: RNCC: 2 | RNVC: 2
5.12.0410.1222.98: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-701-7114
Loop Clamp

127017114
VG95211-ML-127017114: RNCC: 2 | RNVC: 2
5.12.7601.3051.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-6127
Flush Lock

127006127
VG95211-ML-127006127: RNCC: 2 | RNVC: 2
5.12.4003.0010.92: RNCC: 3 | RNVC: 2
0501400368209: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-12-391-2983
Mending Plate

123912983
9999015-161100.009.0: RNCC: 2 | RNVC: 2
9999015-161100.009.0: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-12-354-8639
Manual Control Lever

123548639
1954367/3: RNCC: 3 | RNVC: 2
1954367: RNCC: 5 | RNVC: 9
1954367-3: RNCC: 5 | RNVC: 9

30 Aug 2001

5340-12-386-4320
Loop Clamp

123864320
DIN3016-1-D1-35X20-W1-2-NBR: RNCC: 2 | RNVC: 2

1 Sep 2011

5340-12-390-2047
Loop Clamp

123902047
DIN3016-1-D1-120X25-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Oct 2012

5340-12-702-5224
Angle Bracket

127025224
VG95211-ML-127025224: RNCC: 2 | RNVC: 2
5.51.7010.0130.15: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-176-0985
Expansion Plug

121760985
DIN470-12STPHR: RNCC: 2 | RNVC: 2
6151010107: RNCC: 5 | RNVC: 2
12DIN470PHR: RNCC: 5 | RNVC: 2
12DIN470STPHR: RNCC: 5 | RNVC: 2

8 Nov 1978

5340-12-342-8101
Mounting Bracket

123428101
5010-085: RNCC: 3 | RNVC: 2

3 Apr 1997

5340-12-186-4358
Nonmetallic Bumper

121864358
5801225-21000.03: RNCC: 2 | RNVC: 2
5801225-21000-03: RNCC: 3 | RNVC: 2
5801225-21000.03: RNCC: 3 | RNVC: 2
5801225-21000.03: RNCC: 5 | RNVC: 9

30 Dec 1980

5340-12-308-0513
Loop Clamp

123080513
2602-08.02: RNCC: 3 | RNVC: 2

26 Aug 1986

5340-12-373-7375
Mending Plate

123737375
106-4121-02-00-11: RNCC: 3 | RNVC: 2
158207: RNCC: 5 | RNVC: 2

4 Dec 2007

5340-12-365-8525
Mounting Plate

123658525
5000-5341.A3-3: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-168-1655
Helical Compression Spring Retainer

121681655
WW 410 008 A: RNCC: 2 | RNVC: 2
WW 410 008 A: RNCC: 3 | RNVC: 2
WW 410 008 A: RNCC: 5 | RNVC: 2
WW410008A: RNCC: 5 | RNVC: 2
WW410008A: RNCC: 5 | RNVC: 2
WW410008A: RNCC: 5 | RNVC: 2
WW 410 008 A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-354-0830
Access Cover

123540830
MAB500.BW.001.011.4.M: RNCC: 3 | RNVC: 2
18H5003: RNCC: 5 | RNVC: 2
MAB500.001.020-4-M: RNCC: 5 | RNVC: 9

1 Jun 2001

5340-12-172-9788
Detent Plunger

121729788
4259910220: RNCC: 3 | RNVC: 2

9 Mar 1978

5340-12-168-2377
Mending Plate

121682377
WW410717: RNCC: 3 | RNVC: 2
WW 410 717: RNCC: 5 | RNVC: 2
WW410717: RNCC: 5 | RNVC: 2
WW410717: RNCC: 5 | RNVC: 2

28 Feb 1977

5340-12-323-4499
Dust And Moisture Seal Protective Cap

123234499
51360200: RNCC: 3 | RNVC: 9

27 Nov 1990

5340-12-387-8634
Spring Tension Clip

123878634
7093025: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-359-9915
Mechanical Stop

123599915
CBD45312P02: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-041-9779

5340-12-315-9152
Mounting Bracket

123159152
2300264-261000.02.0: RNCC: 2 | RNVC: 2
2300264-261000.02.0: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-12-316-5940
Mounting Bracket

123165940
1000192-01 2 30000.10: RNCC: 2 | RNVC: 2
1000192-01 2 30000.10: RNCC: 3 | RNVC: 2
1000192-01 2 30000.10: RNCC: 5 | RNVC: 9

26 Jan 1989

5340-12-390-9733
Dust And Moisture Seal Protective Cap

123909733
GPN210ZL15X20: RNCC: 3 | RNVC: 2
210 ZL 15 X 20: RNCC: 5 | RNVC: 2

11 Jan 2013

5340-12-393-6680
Mounting Plate

123936680
4100098-982410.004.0: RNCC: 2 | RNVC: 2
4100098-982410.004.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-199-6854
Dust And Moisture Seal Protective Plug

121996854
300F312: RNCC: 3 | RNVC: 2
GPN300F312: RNCC: 5 | RNVC: 2
1203 4902: RNCC: 5 | RNVC: 2
3.0219.01.9.0061: RNCC: 5 | RNVC: 2
0728343: RNCC: 5 | RNVC: 2
300031200: RNCC: 5 | RNVC: 9
F312: RNCC: 5 | RNVC: 9
F312GPN300: RNCC: 5 | RNVC: 9
GPN300,F312: RNCC: 5 | RNVC: 9
728343: RNCC: 5 | RNVC: 9

22 May 1984

5340-12-348-5603
Bridge Clamp

123485603
9840025200: RNCC: 3 | RNVC: 2
94100101: RNCC: 5 | RNVC: 2

16 Jul 1999

5340-12-317-3546
Hinge Torsion Bar

123173546
2510361110: RNCC: 3 | RNVC: 2

30 Mar 1989

5340-12-165-0143

5340-12-352-2665
Dust And Moisture Seal Protective Cap

123522665
348.79.313: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-300-1252
Flare Lock Fastener

123001252
90053803: RNCC: 3 | RNVC: 2
90053803: RNCC: 5 | RNVC: 2

5 Jul 1984

5340-12-300-9358
Mending Plate

123009358
1423-849.10(5): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-321-7663
Dust And Moisture Seal Protective Cap

123217663
800M45X2: RNCC: 3 | RNVC: 2
779010677: RNCC: 5 | RNVC: 2
GPN800,M45X2 FORM A: RNCC: 5 | RNVC: 2

25 Jun 1990

5340-12-306-0748
Angle Bracket

123060748
5801984-981511.002.0: RNCC: 2 | RNVC: 2
5801984-981511.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-198-1097
Electrical-Mechanical Equipment Post

121981097
5801999-171000.01: RNCC: 3 | RNVC: 2
VG95148A25XM6X620-AL: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-331-4561
Bow Handle

123314561
GN565-26-400-SW: RNCC: 3 | RNVC: 2
GN565-26-400SW: RNCC: 5 | RNVC: 2

6 May 1993

5340-12-701-7351
Retaining Strap

127017351
VG95211-ML-127017351: RNCC: 2 | RNVC: 2
5.12.7608.8070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-1283
Angle Bracket

127011283
VG95211-ML-127011283: RNCC: 2 | RNVC: 2
5-22-750 OST1 12562-76: RNCC: 3 | RNVC: 2
OST 1 12562-76 5-22-750: RNCC: 5 | RNVC: 2
0500800288299: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-338-8644
Casement Fastener

123388644
200-0410: RNCC: 3 | RNVC: 2
1000-21: RNCC: 3 | RNVC: 2
0.20.0540.0: RNCC: 3 | RNVC: 2

1 Sep 1995

5340-12-702-5190
Mounting Plate

127025190
VG95211-ML-127025190: RNCC: 2 | RNVC: 2
5.51.6501.1749.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-2418
Butt Hinge

123652418
2500278-191700.003.0: RNCC: 3 | RNVC: 2

10 Dec 2004

5340-12-371-3248
Mounting Plate

123713248
708-121100-961-0: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-12-316-6397
Butt Hinge Leaf

123166397
1000192-01 4 00000.01: RNCC: 2 | RNVC: 2
1000192-01 4 00000.01: RNCC: 3 | RNVC: 2
1000192-01400000.01: RNCC: 5 | RNVC: 9
1000192-01400000.01: RNCC: 5 | RNVC: 9
1000192-01 4 00000.01: RNCC: 5 | RNVC: 9
1000192-01400000.01: RNCC: 5 | RNVC: 9

30 Jan 1989

5340-12-700-2757
Mounting Bracket

127002757
51-270437004: RNCC: 2 | RNVC: 2
765-65-SB228: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-12-338-6960
Expansion Plug

123386960
DIN443-A15-ST-A3P: RNCC: 2 | RNVC: 2
000443015000: RNCC: 5 | RNVC: 2
DIN443-A15-DBL8451.11: RNCC: 5 | RNVC: 2
A15DIN443-A3P: RNCC: 5 | RNVC: 2
DIN443-A15-ST-VERZINKT: RNCC: 5 | RNVC: 2
DIN443-A15-ST-ZN: RNCC: 5 | RNVC: 2

16 Aug 1995

5340-12-186-7704
Handwheel

121867704
25704-191329.00.0: RNCC: 2 | RNVC: 2
25704-191329-00-0: RNCC: 5 | RNVC: 2
25704-191329-00-0: RNCC: 5 | RNVC: 9
25704-191329.00.0: RNCC: 5 | RNVC: 9

4 Feb 1981

5340-12-389-6662
Mechanic Equipment Hardware Kit

123896662
5801525-5600.00: RNCC: 2 | RNVC: 2
5801525-5600.00: RNCC: 3 | RNVC: 2

8 Aug 2012

5340-12-121-0380
Spring Tension Clip

121210380
81976400003: RNCC: 3 | RNVC: 2
00083616044: RNCC: 5 | RNVC: 2
8F16044: RNCC: 5 | RNVC: 2
00.08361-6044: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-7544
Runner

123567544
2125-115100.06B: RNCC: 2 | RNVC: 2
2125-115100.06B: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-357-9033
Eye Hook

123579033
E31615-00: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-179-3983
Buckle

121793983
DIN5292-20-ST-GELBOLIV: RNCC: 2 | RNVC: 2
3220078: RNCC: 3 | RNVC: 2
20DIN5292STEINBRENNLACKIERT6014: RNCC: 5 | RNVC: 2

27 Jun 1979

5340-12-328-6172
Manual Control Handle

123286172
4985064-210: RNCC: 2 | RNVC: 2
4985064-210: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-351-5099
Retaining Bail

123515099
4618900432: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-311-3501
Access Cover

123113501
272.309.849: RNCC: 3 | RNVC: 2
272.309 849: RNCC: 5 | RNVC: 9

21 Aug 1987

5340-12-301-7299
Dust And Moisture Seal Protective Cap

123017299
81964100254: RNCC: 3 | RNVC: 2
81.96410.0254: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-360-0450
Mounting Plate

123600450
9416500137: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-150-7252

5340-12-319-5834
Resilient Mount

123195834
CF 447 770 -R: RNCC: 2 | RNVC: 2
64105013: RNCC: 3 | RNVC: 2
CF 447 770 -R: RNCC: 5 | RNVC: 2
0064105013: RNCC: 5 | RNVC: 2
CF 447 770 -R: RNCC: 5 | RNVC: 2
CF 447 770 -R: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-365-1337
Mounting Bracket

123651337
1837-190830.002.0: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-359-8964
Access Cover

123598964
1868.250007.000.0: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-12-386-1495
Manual Control Lever

123861495
2481-395231.001.0: RNCC: 2 | RNVC: 2
2481-395231.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-180-7890
Platte

121807890
CF 420 950 D: RNCC: 2 | RNVC: 2
CF 420 950 D: RNCC: 3 | RNVC: 2
CF 420 950 C: RNCC: 5 | RNVC: 2
CF 420 950 D: RNCC: 5 | RNVC: 2
CF420950C: RNCC: 5 | RNVC: 2
CF 420 950 C: RNCC: 5 | RNVC: 2
CF 420 950 D: RNCC: 5 | RNVC: 2
CF420950C: RNCC: 5 | RNVC: 2
CF 420 950 C: RNCC: 5 | RNVC: 2
CF420950C: RNCC: 5 | RNVC: 2

4 Oct 1979

5340-12-340-0625
Bail Handle

123400625
90.51.9: RNCC: 3 | RNVC: 2
262.01: RNCC: 3 | RNVC: 2

22 Feb 1996

5340-12-185-7690
Pipe Bracket

121857690
UNIVERSALSCHELLEPG16: RNCC: 3 | RNVC: 2

30 Oct 1980

5340-12-359-6035
Mounting Bracket

123596035
9433231140: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-185-4021
Bow Handle

121854021
C 3782 240: RNCC: 3 | RNVC: 2
C 3782 240: RNCC: 5 | RNVC: 2
C3782240: RNCC: 5 | RNVC: 2
C3782240: RNCC: 5 | RNVC: 2
3236AHS400MM: RNCC: 5 | RNVC: 9

3 Oct 1980

5340-12-144-8647
Butt Hinge Leaf

121448647
A25X3X208HAN16515W3355-7: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-6334
Metal Runner

123026334
1-2733-6-4: RNCC: 2 | RNVC: 2
1-2733-6-4: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-305-3732
Turnbuckle

123053732
950.264.1.4: RNCC: 3 | RNVC: 9
950.99.224.34.04: RNCC: 5 | RNVC: 9

28 Oct 1985

5340-12-351-9538
Angle Bracket

123519538
2300311-682000.003.0: RNCC: 2 | RNVC: 2
2300311-682000.003.0: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-12-304-3326
Mortise Lock Set

123043326
1 15 603: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-701-6245
Mounting Plate

127016245
VG95211-ML-127016245: RNCC: 2 | RNVC: 2
5.12.7030.8350.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-328-6295
Catch Strike

123286295
E2.17.00.04/5: RNCC: 3 | RNVC: 2
2-17-00-04/5: RNCC: 5 | RNVC: 2

10 Jun 1992

5340-12-702-4311
Mounting Bracket

127024311
VG95211-ML-127024311: RNCC: 2 | RNVC: 2
5.12.8700.8032.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-382-1801
Access Cover

123821801
MRL 52 / 2890436-1: RNCC: 3 | RNVC: 2

19 May 2010

5340-12-328-3715
Nonmetallic Bumper

123283715
2300232-822320.000.0: RNCC: 2 | RNVC: 2
13-SK-15808.06.00: RNCC: 3 | RNVC: 2

12 May 1992

5340-12-156-5444
Webbing Strap

121565444
42161-10110: RNCC: 3 | RNVC: 2
000-D6-25X2,5X580-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-306-0677
Angle Bracket

123060677
5801984-200520.005.0: RNCC: 2 | RNVC: 2
5801984-200520.005.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-317-9173
Strap Hinge Leaf

123179173
1000192-01 2 10300: RNCC: 2 | RNVC: 2
1000192-01 2 10300: RNCC: 3 | RNVC: 2
1000192-01 2 10300: RNCC: 5 | RNVC: 9

26 May 1989

5340-12-168-4264
Retaining Strap

121684264
DIN1592-13ZN: RNCC: 2 | RNVC: 2
DIN1592-13ZN: RNCC: 3 | RNVC: 2
DIN1592-13ZN: RNCC: 3 | RNVC: 2
26-2815012: RNCC: 5 | RNVC: 2
00006290020: RNCC: 5 | RNVC: 2
48035: RNCC: 5 | RNVC: 2
DIN1592-13ZN: RNCC: 5 | RNVC: 2
48035: RNCC: 5 | RNVC: 2
00006290020: RNCC: 5 | RNVC: 9
13DIN1592: RNCC: 5 | RNVC: 9

10 Mar 1977

5340-12-325-9175
Loop Clamp

123259175
71-112: RNCC: 3 | RNVC: 2

23 Jul 1991

5340-12-355-0871
Mounting Plate

123550871
4802-0001: RNCC: 2 | RNVC: 2
4802-0001: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-12-124-1197
Rod End Clevis

121241197
DIN71752-G5X20-10S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X20-9SMN28K-A3C: RNCC: 2 | RNVC: 2
DIN71752-G5X20-9SMNPB28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X20-10S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G5X20-10S20K-A3P: RNCC: 3 | RNVC: 2
G5X20DIN71752-10S20K: RNCC: 5 | RNVC: 2
100200050020/024-10S20K: RNCC: 5 | RNVC: 2
G5X20DIN71752-10S20K: RNCC: 5 | RNVC: 9
DIN71752-G5X20-10S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-3829
Access Cover

123193829
C117-A44-B17: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-301-3823
Angle Bracket

123013823
P-855270-401: RNCC: 3 | RNVC: 2
P855270-401: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-363-8949
Webbing Strap

123638949
599.076.005.003: RNCC: 3 | RNVC: 2
81.65752-0010: RNCC: 5 | RNVC: 2
81657520010: RNCC: 5 | RNVC: 2

3 Aug 2004

5340-12-357-4013
Section Block Clamp

123574013
J29120082-002: RNCC: 3 | RNVC: 2
008013310: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-12-378-3404
Mounting Bracket

123783404
9997023-206200.012.0: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-192-6557
Casement Fastener

121926557
7820211760: RNCC: 3 | RNVC: 2
78202 11760: RNCC: 5 | RNVC: 9

12 May 1982

5340-12-358-8932
Angle Bracket

123588932
3875420540: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-358-8917
Angle Bracket

123588917
3522031140: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-357-6931
Quick Release Plunger

123576931
2205504: RNCC: 3 | RNVC: 2
EH2205.504: RNCC: 5 | RNVC: 2
2205.504: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-360-0470
Access Cover

123600470
9416891339: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-301-8414
Dust And Moisture Seal Protective Cap

123018414
0730 361 103: RNCC: 3 | RNVC: 2
0730361103: RNCC: 5 | RNVC: 2
0009971120: RNCC: 5 | RNVC: 2

13 Nov 1984

5340-12-176-8427
Resilient Mount

121768427
33531230276: RNCC: 3 | RNVC: 9

20 Dec 1978

5340-12-166-3366
Pipe Bracket

121663366
269012061100: RNCC: 3 | RNVC: 2
269012061100: RNCC: 5 | RNVC: 2

26 Aug 1976

5340-12-315-0383
Nonmetallic Bumper

123150383
15.4611.1029: RNCC: 3 | RNVC: 2

9 Sep 1988

5340-12-332-7996
Mounting Plate

123327996
512222-1101.000: RNCC: 3 | RNVC: 2
512222-1101: RNCC: 5 | RNVC: 2

21 Sep 1993

5340-12-177-2794
Retaining Strap

121772794
4029955225: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-338-2634
Mounting Plate

123382634
2.72-26360: RNCC: 3 | RNVC: 2
8139: RNCC: 5 | RNVC: 9

13 Jun 1995

5340-12-339-2502
Plain Solid Disk

123392502
04042100: RNCC: 3 | RNVC: 2
04042100.894: RNCC: 5 | RNVC: 2

30 Oct 1995

5340-12-347-5779
Handwheel

123475779
35.006 25MM IT6: RNCC: 3 | RNVC: 2
0101220204: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-351-7590
Pad Eye

123517590
6301.150.126.000: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-357-3820
Mounting Plate

123573820
925954 3000: RNCC: 3 | RNVC: 2

14 Jun 2002

5340-12-393-3791
Angle Bracket

123933791
4100094-982172.001.0: RNCC: 2 | RNVC: 2
4100094-982172.001.0: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-12-346-4206
Mounting Bracket

123464206
2300348-970450.003.0: RNCC: 2 | RNVC: 2
2300348-970450.003.0: RNCC: 3 | RNVC: 2
1808567: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-188-4657
Retaining Clip

121884657
023-150000-24-0: RNCC: 3 | RNVC: 2

13 Jul 1981

5340-12-393-3004
Access Cover

123933004
4100094-982224.000.0: RNCC: 2 | RNVC: 2
4100094-982224.000.0: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-388-9782
Flush Lock

123889782
1.65.3201: RNCC: 3 | RNVC: 2

11 May 2012

5340-12-388-2910
Mounting Bracket

123882910
1622656: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-12-043-9467

5340-12-318-1207
Retaining Strap

123181207
DMAF003: RNCC: 3 | RNVC: 2
DM AF 003: RNCC: 5 | RNVC: 2

13 Jun 1989

5340-12-344-4742
Mounting Bracket

123444742
P-295615-005: RNCC: 3 | RNVC: 2
P295615-005: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-195-8269
Angle Bracket

121958269
43-1785-190880.00.0: RNCC: 3 | RNVC: 2

20 Apr 1983

5340-12-340-9582
Retaining Clamp Assembly

123409582
19.116.221-02: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-12-198-5485
Angle Bracket

121985485
25704-196800.03.0: RNCC: 2 | RNVC: 2
25704-196800.03.0: RNCC: 3 | RNVC: 2
25704-196800-03-0: RNCC: 5 | RNVC: 2
25704-196800-03-0: RNCC: 5 | RNVC: 9
25704-196800.03.0: RNCC: 5 | RNVC: 9

8 Feb 1984

5340-12-702-5344
Angle Bracket

127025344
VG95211-ML-127025344: RNCC: 2 | RNVC: 2
5.51.7204.0210.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-152-0001
Clamping Catch

121520001
5800407-0021-000: RNCC: 2 | RNVC: 2
3P103-21: RNCC: 5 | RNVC: 2
5800407-0021-000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9964
Loop Clamp

127019964
VG95211-ML-127019964: RNCC: 2 | RNVC: 2
155N464-700: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-319-1986
Mounting Bracket

123191986
2654-332141.00: RNCC: 2 | RNVC: 2
2654-332141.00: RNCC: 3 | RNVC: 2
2654-332 141.00: RNCC: 5 | RNVC: 9
679-02010401: RNCC: 5 | RNVC: 9
679-02010401: RNCC: 5 | RNVC: 9

13 Sep 1989

5340-12-148-9172
Handle Grip

121489172
DIN39-E36X15-ST: RNCC: 2 | RNVC: 2
E36X15DIN39ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-9704
Angle Bracket

123079704
33A47-0025-00.001: RNCC: 3 | RNVC: 2
FS26415: RNCC: 5 | RNVC: 9

15 Aug 1986

5340-12-190-7172
Extension Drawer Slide Section

121907172
NO PRIMARY REF 12-190-7172: RNCC: 3 | RNVC: 2
6935 132725: RNCC: 5 | RNVC: 9
6935132725: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-340-0839
Spacing Threaded Standoff

123400839
2W132D004-2000.02: RNCC: 2 | RNVC: 2
2W132D004-2000.02: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-360-8922
Clamping Catch

123608922
P70170101001: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-331-5108
Mending Plate

123315108
U100-3210-002: RNCC: 2 | RNVC: 2
U100-3210-002: RNCC: 3 | RNVC: 2
U100-3210-002: RNCC: 5 | RNVC: 2

12 May 1993

5340-12-377-3741
Mechanical Stop

123773741
315022: RNCC: 3 | RNVC: 2
5283-05-10-03/37: RNCC: 5 | RNVC: 2

13 Jan 2009

5340-12-323-8352
Access Cover

123238352
1229-601: RNCC: 2 | RNVC: 2
JB-381: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-317-1986
Nonmetallic Bumper

123171986
3227230072: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-159-6501
Retaining Band

121596501
43U742-5A: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-159-4881
Angle Bracket

121594881
117571807: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-352-9103
Dust And Moisture Seal Boot

123529103
0501 315 790: RNCC: 3 | RNVC: 2
81964200522: RNCC: 5 | RNVC: 2
0501315790: RNCC: 5 | RNVC: 2

5 Jan 2001

5340-12-322-3633
Retaining Band

123223633
1200306: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-376-8015
Butt Hinge

123768015
365123: RNCC: 3 | RNVC: 2

7 Nov 2008

5340-12-092-0946

5340-12-197-4037
Retaining Band

121974037
TK-BA35-5340-032: RNCC: 2 | RNVC: 2
41121-124: RNCC: 3 | RNVC: 2
14-028: RNCC: 5 | RNVC: 2
41121-124: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-373-7663
Surface Bolt

123737663
J040G8015H518-000A0-017: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-12-381-2874
Genera Guide Rail

123812874
424-02-FV: RNCC: 3 | RNVC: 2
4250473100196: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-353-6870
Multiple Angle Bracket

123536870
J92222433-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-177-2495
Retaining Strap

121772495
PAN4173-90: RNCC: 3 | RNVC: 2

22 Jan 1979

5340-12-193-4373
Dust And Moisture Seal Protective Plug

121934373
300V32: RNCC: 3 | RNVC: 2
300V32: RNCC: 5 | RNVC: 2
GPN300V32: RNCC: 5 | RNVC: 2
GPN300V32: RNCC: 5 | RNVC: 2
301003200: RNCC: 5 | RNVC: 9
GPN300,V32: RNCC: 5 | RNVC: 9
V32: RNCC: 5 | RNVC: 9
V32GPN300: RNCC: 5 | RNVC: 9

21 Jul 1982

5340-12-317-0502
Helical Compression Spring Seat

123170502
3124231189: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-315-3588
Double Angle Bracket

123153588
1000173-190000.003.0: RNCC: 2 | RNVC: 2
1000173-190000.003.0: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-12-182-2228
Angle Bracket

121822228
CF 465 953: RNCC: 2 | RNVC: 2
CF 465 953: RNCC: 3 | RNVC: 2
CF465953: RNCC: 5 | RNVC: 2
CF 465 953: RNCC: 5 | RNVC: 2
CF 465 953: RNCC: 5 | RNVC: 2
CF465953: RNCC: 5 | RNVC: 2
CF465953: RNCC: 5 | RNVC: 2

21 Jan 1980

5340-12-359-7369
Mounting Bracket

123597369
S282M4015101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-357-5283
Flush Lock

123575283
0007206535: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-125-2851

5340-12-146-9703
Loop Clamp

121469703
4072 311 087: RNCC: 3 | RNVC: 2
4072311087: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-374-4573
Sliding Door Hanger

123744573
9017601047: RNCC: 3 | RNVC: 2
2D1843436B: RNCC: 3 | RNVC: 2

19 Feb 2008

5340-12-378-6612
Spring Loaded Cylinder Fastener

123786612
03091-1308: RNCC: 3 | RNVC: 2

29 Apr 2009

5340-12-309-2614
Plain Solid Disk

123092614
249-43458: RNCC: 3 | RNVC: 2

7 Jan 1987

5340-12-384-2165
Dust And Moisture Seal Protective Cap

123842165
2301704: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-315-0663
Tubular Fairlead Half

123150663
15368601: RNCC: 3 | RNVC: 2
335603: RNCC: 5 | RNVC: 2

13 Sep 1988

5340-12-192-1839
Hand Crank

121921839
BO13673: RNCC: 3 | RNVC: 2

29 Mar 1982

5340-12-323-4448
Dust And Moisture Seal Protective Plug

123234448
8097 040 110: RNCC: 3 | RNVC: 2
8097040110: RNCC: 5 | RNVC: 2
8097040110: RNCC: 5 | RNVC: 9

27 Nov 1990

5340-12-320-4405
Dust And Moisture Seal Protective Plug

123204405
620U6B: RNCC: 3 | RNVC: 2
GPN620,U6B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-339-9276
Key Blank

123399276
SZ2532000: RNCC: 3 | RNVC: 2
3524 E: RNCC: 5 | RNVC: 2
SZ2532: RNCC: 5 | RNVC: 2

1 Feb 1996

5340-12-318-1324
Access Hole Frame

123181324
704-125116-000-0: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-165-8965
Loop Clamp

121658965
2250241: RNCC: 3 | RNVC: 2
2037-16-24MM: RNCC: 5 | RNVC: 2
428623: RNCC: 5 | RNVC: 2
2250-24-1: RNCC: 5 | RNVC: 9

13 Jul 1976

5340-12-323-9198
Electrical-Mechanical Equipment Post

123239198
VG95148B4XM2X10-2.0380-E2A: RNCC: 2 | RNVC: 2
VG95148B4XM2X10-2.0380-E2A: RNCC: 3 | RNVC: 2
18H2404: RNCC: 3 | RNVC: 2
5.01.103: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-12-393-5479
Dust And Moisture Seal Protective Cap

123935479
GPN200Z16X20-RAL3000: RNCC: 3 | RNVC: 2
200-Z16X20: RNCC: 5 | RNVC: 1
9560166030: RNCC: 5 | RNVC: 2
GPN200Z16X20-RAL3000: RNCC: 5 | RNVC: 2
200Z16X20-RAL3000: RNCC: 5 | RNVC: 2

24 Sep 2013

5340-12-190-5579
Mending Plate

121905579
NO PRIMARY REF 12-190-5579: RNCC: 3 | RNVC: 2
25/80572.00: RNCC: 5 | RNVC: 9
25-80572-00: RNCC: 5 | RNVC: 9
027 7120 580572: RNCC: 5 | RNVC: 9
0277120580572: RNCC: 5 | RNVC: 9

2 Dec 1981

5340-12-132-7351
Retaining Strap

121327351
VG95933FR-22-MS-BK: RNCC: 2 | RNVC: 2
1/2G22MMN325-CUZN37F29: RNCC: 3 | RNVC: 2
1-2G22MMN325MS: RNCC: 5 | RNVC: 2
1/2G22MMN325MS: RNCC: 5 | RNVC: 2
700325022202: RNCC: 5 | RNVC: 2
378118: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-0837
Lock-Release Lever

123280837
1000192-00 0 04200.01: RNCC: 2 | RNVC: 2
1000192-00 0 04200.01: RNCC: 3 | RNVC: 2
1000192-00 0 04200.01: RNCC: 5 | RNVC: 9

3 Apr 1992

5340-12-321-9431
Metal Runner

123219431
702-241500-956-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-314-2529
Loop Clamp

123142529
DIN3015-S-A-5-E-76-PP-W1: RNCC: 2 | RNVC: 2
HRES5S76PP STMBL: RNCC: 3 | RNVC: 2
RCEG1-576: RNCC: 3 | RNVC: 2
SPAL7076PPR-DPAL-AS: RNCC: 3 | RNVC: 2
HRE5SS76PP: RNCC: 5 | RNVC: 2
HRES5S76PP ST BL: RNCC: 5 | RNVC: 2
RCEG1-576: RNCC: 5 | RNVC: 2
DIN3015-SA5E-76PP-W1: RNCC: 5 | RNVC: 2
SPAL7076PPR-DPAL-AS: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-373-4690
Ball Socket Seat

123734690
1393001-30100-01: RNCC: 2 | RNVC: 2
1393001-30100.01: RNCC: 5 | RNVC: 2

6 Nov 2007

5340-12-311-7860
Electrical-Mechanical Equipment Post

123117860
23303-140000.36: RNCC: 2 | RNVC: 2
619-22.00.147-02: RNCC: 3 | RNVC: 2
23303-140000.36: RNCC: 5 | RNVC: 9

16 Oct 1987

5340-12-357-5714
Dust And Moisture Seal Protective Cap

123575714
3720-000000-04: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-372-8893
Spring Tension Clip

123728893
53970: RNCC: 3 | RNVC: 2
0009956665: RNCC: 5 | RNVC: 2

3 Sep 2007

5340-12-387-9123
Retaining Strap

123879123
0004436-801: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-393-2080
Manual Control Handle

123932080
8442418: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-12-348-5737
Mounting Plate

123485737
NN31021G01: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-12-346-9495
Mounting Bracket

123469495
1400988-3000.05: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-12-348-7772
Verbindungsstueck

123487772
1734801: RNCC: 2 | RNVC: 2
1734801: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-12-312-5469
Angle Bracket

123125469
81420305084: RNCC: 3 | RNVC: 2
81.42030.5084: RNCC: 5 | RNVC: 2

15 Jan 1988

5340-12-380-7930
Retaining Bail

123807930
1127: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-12-308-0990
Loop Clamp

123080990
51.2474.065.08: RNCC: 3 | RNVC: 2

2 Sep 1986

5340-12-306-0125
Mending Plate

123060125
2478201: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-306-0140
Angle Bracket

123060140
2696801: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-023-0951

5340-12-327-9485
Electrical-Mechanical Equipment Post

123279485
G24930-A12-C11: RNCC: 3 | RNVC: 2

21 Mar 1992

5340-12-314-6723
Mounting Bracket

123146723
512214-3500.000: RNCC: 3 | RNVC: 2
512214-3500: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-368-4875
Angle Bracket

123684875
J53230022-004: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-12-324-9673
Filler Opening Cap

123249673
NO PRIMARY REF 12-324-9673: RNCC: 3 | RNVC: 2
50152100: RNCC: 5 | RNVC: 2
04040-00-058: RNCC: 5 | RNVC: 9

16 Apr 1991

5340-12-332-6610
Angle Bracket

123326610
81974870532: RNCC: 2 | RNVC: 2
81974870532: RNCC: 3 | RNVC: 2
81.97487-0532: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-312-4738
Lock-Release Lever

123124738
2300013-0435.00: RNCC: 2 | RNVC: 2
2300013-0435.00: RNCC: 3 | RNVC: 2
2300013-0435.00: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-317-1284
Nut And Bolt Locking Plate

123171284
1100112: RNCC: 3 | RNVC: 2
320308-04: RNCC: 5 | RNVC: 2

10 Mar 1989

5340-12-318-8304
Angle Bracket

123188304
6100125-5200: RNCC: 2 | RNVC: 2
4205615333: RNCC: 3 | RNVC: 2

21 Aug 1989

5340-12-339-0513
Dust And Moisture Seal Protective Plug

123390513
11.00153.5.2: RNCC: 3 | RNVC: 2
B439: RNCC: 5 | RNVC: 2
0009977786: RNCC: 5 | RNVC: 2

4 Oct 1995

5340-12-312-4569
Flush Lock

123124569
1 76 348: RNCC: 3 | RNVC: 9
176348: RNCC: 3 | RNVC: 9

8 Jan 1988

5340-12-307-4144
Mending Plate

123074144
151-252000-903-0: RNCC: 3 | RNVC: 2

13 Jun 1986

5340-12-363-6222
Mending Plate

123636222
DIN3015-LDP-0-W5: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-368-5542
Mechanical Stop

123685542
S533M50X1002: RNCC: 2 | RNVC: 2
SACS10442: RNCC: 3 | RNVC: 2
S533M50X1002: RNCC: 5 | RNVC: 2

24 Mar 2006

5340-12-028-0708

5340-12-367-9247
Dust And Moisture Seal Protective Cap

123679247
210ZL13X20: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-369-4024
Runner

123694024
3039608: RNCC: 3 | RNVC: 2
3039.608: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-352-5685
Spacing Threaded Standoff

123525685
5.04.501: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-388-2075
Retaining Bail

123882075
1030105-206100.004.0: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-312-7773
Door Button

123127773
100000898: RNCC: 2 | RNVC: 2
100000898: RNCC: 3 | RNVC: 2

4 Feb 1988

5340-12-387-6961
Mounting Bracket

123876961
GE9101T990: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-360-3003
Dust And Moisture Seal Protective Plug

123603003
0009620121: RNCC: 3 | RNVC: 2
0009620121: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-175-2668
Angle Bracket

121752668
WW310352: RNCC: 3 | RNVC: 2
WW310352: RNCC: 5 | RNVC: 2
WW 310 352: RNCC: 5 | RNVC: 2
WW310352: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-148-5011

5340-12-382-2282
Mounting Bracket

123822282
5232030744: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-197-0755
Lock-Release Lever

121970755
4357437069: RNCC: 3 | RNVC: 2
4357437069: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-12-011-0270

5340-12-300-8465
Angle Bracket

123008465
4253130242: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-329-0629
Spring Tension Clip

123290629
6525040038: RNCC: 3 | RNVC: 2

15 Jul 1992

5340-12-351-8430
Mechanical Stop

123518430
10063-540000.05: RNCC: 3 | RNVC: 2
10063-540000.05: RNCC: 5 | RNVC: 9

1 Sep 2000

5340-12-320-8348
Access Cover

123208348
1000042-190200.23M01: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-12-361-0324
Angle Bracket

123610324
J28130093-401: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-329-4346
Nonmetallic Bumper

123294346
1300555-211200-02-00: RNCC: 2 | RNVC: 2
VS5024T041: RNCC: 3 | RNVC: 2
VS5024T041: RNCC: 5 | RNVC: 9

19 Aug 1992

5340-12-702-1405
Mounting Bracket

127021405
VG95211-ML-127021405: RNCC: 2 | RNVC: 2
30.6100.128: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-182-0430
Electrical-Mechanical Equipment Post

121820430
3422028721: RNCC: 3 | RNVC: 2
5801506-5000-001: RNCC: 5 | RNVC: 2
5801506-5000-001: RNCC: 5 | RNVC: 9
34220 28721: RNCC: 5 | RNVC: 9

9 Jan 1980

5340-12-145-2538
Resilient Mount

121452538
741493: RNCC: 3 | RNVC: 2
493: RNCC: 3 | RNVC: 2
SCHEIBENFEDER-741493.NR60.ST: RNCC: 3 | RNVC: 2
57414930042: RNCC: 5 | RNVC: 2
741493: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-341-8007
Access Cover

123418007
22TAN22511: RNCC: 3 | RNVC: 2
TAN22511-22: RNCC: 5 | RNVC: 2

30 Oct 1996

5340-12-339-2085
Nut And Bolt Retainer

123392085
320316-01: RNCC: 3 | RNVC: 2
1100063: RNCC: 5 | RNVC: 2

25 Oct 1995

5340-12-164-1042
Loop Clamp

121641042
DIN3016-G1-110X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-110X12-W1-2: RNCC: 3 | RNVC: 2
SP110/12SKZ: RNCC: 3 | RNVC: 2
1310005110: RNCC: 5 | RNVC: 2
SP110-12ZY: RNCC: 5 | RNVC: 2
VG95931G110X12W1: RNCC: 5 | RNVC: 9
VG95931-G110X12-W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-0828
Nonmetallic Bumper

123130828
P-896284-003: RNCC: 3 | RNVC: 2
P896284-003: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-196-7599
Double Angle Bracket

121967599
P-296841-409: RNCC: 3 | RNVC: 2
P296841-409: RNCC: 5 | RNVC: 2

11 Aug 1983

5340-12-338-0740
Turnbuckle

123380740
S-17045-1A-31: RNCC: 3 | RNVC: 2
S-16105-21: RNCC: 5 | RNVC: 2
S17045-1A/31: RNCC: 5 | RNVC: 2

18 May 1995

5340-12-349-6073
Access Cover

123496073
2500238-150020.000.0: RNCC: 2 | RNVC: 2
2500238-150020.000.0: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-141-8133
Helical Compression Spring Seat

121418133
1410500101: RNCC: 3 | RNVC: 2
1 410 500 101: RNCC: 5 | RNVC: 2
02232027: RNCC: 5 | RNVC: 2
81.11131-0010: RNCC: 5 | RNVC: 2
81111310010: RNCC: 5 | RNVC: 2
WMS50S6X: RNCC: 5 | RNVC: 2
0029973440: RNCC: 5 | RNVC: 2
6-0690-12-8-1019: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-8828
Angle Bracket

127018828
VG95211-ML-127018828: RNCC: 2 | RNVC: 2
9 OST1 10218-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-149-6949
Dust And Moisture Seal Protective Cap

121496949
14056-4000-05: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-198-9644
Strap End Clip

121989644
NO PRIMARY REF 12-198-9644: RNCC: 3 | RNVC: 2
10VG4862: RNCC: 5 | RNVC: 9
VG4862-10: RNCC: 5 | RNVC: 9

16 Mar 1984

5340-12-176-3876
Door Button

121763876
2300013-3624-00: RNCC: 2 | RNVC: 2
9809897: RNCC: 3 | RNVC: 2
2300013-3624-00: RNCC: 5 | RNVC: 9
9809897: RNCC: 5 | RNVC: 9
2300013-3624-00: RNCC: 5 | RNVC: 9

27 Nov 1978

5340-12-340-6087
Support Hook

123406087
011155: RNCC: 3 | RNVC: 2

10 May 1996

5340-12-352-2959
Loop Clamp

123522959
5308397: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-365-0685
Mounting Plate

123650685
4636100011: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-360-4767
Manual Control Lever

123604767
82003002: RNCC: 3 | RNVC: 2
82003002: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-365-0628
Nonmetallic Bumper

123650628
6110940185: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-326-5113
Runner

123265113
3968900422: RNCC: 3 | RNVC: 2

26 Sep 1991

5340-12-326-1388
Angle Bracket

123261388
0414 7312: RNCC: 3 | RNVC: 2
4147312ED0148-43: RNCC: 5 | RNVC: 2

12 Aug 1991

5340-12-181-2594
Mending Plate

121812594
81907502272: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-12-316-1706
Lock-Release Lever

123161706
4607200216: RNCC: 3 | RNVC: 2

28 Dec 1988

5340-12-319-3207
Helical Compression Spring Seat

123193207
HE41139C: RNCC: 3 | RNVC: 2

22 Sep 1989

5340-12-351-9259
Mounting Plate

123519259
111G10026: RNCC: 3 | RNVC: 2

15 Sep 2000

5340-12-375-5703
Handle Grip

123755703
S259M6077213: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-12-185-1155
Clamping Catch

121851155
PAN5113E: RNCC: 3 | RNVC: 2

11 Sep 1980

5340-12-315-8277
Mounting Bracket

123158277
54.0026.043.00: RNCC: 3 | RNVC: 2
54002604300: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-393-7403
Mounting Actuator Plate

123937403
G36500: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-302-6744
Mending Plate

123026744
5801101-2110.002: RNCC: 3 | RNVC: 2
5801101-2110.002: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-334-2316
Webbing Strap

123342316
79017/026-5000-0250: RNCC: 3 | RNVC: 2
79017/026-5000-250: RNCC: 5 | RNVC: 2
DIN60060-2-25X250X4750-C4/D2: RNCC: 5 | RNVC: 9

18 Apr 1994

5340-12-351-3618
Access Cover

123513618
72.012-123.030: RNCC: 3 | RNVC: 2

18 Jul 2000

5340-12-193-8319
Mending Plate

121938319
2300094-180500.01.0: RNCC: 3 | RNVC: 2
2300094-180500.01.0: RNCC: 5 | RNVC: 2
2300094-180500-01-0: RNCC: 5 | RNVC: 9
2300094-180500.01.0: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-12-702-2393
Retaining Strap

127022393
VG95211-ML-127022393: RNCC: 2 | RNVC: 2
30.7702.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-5150
Elastic Cord Assembly

123015150
1513-918.128-300MM: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-357-4285
Webbing Strap

123574285
8100295-210: RNCC: 2 | RNVC: 2
8100295-210: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-12-306-6676
Expansion Shield

123066676
06757086: RNCC: 3 | RNVC: 9
FE757-086: RNCC: 3 | RNVC: 9

19 Mar 1986

5340-12-139-3357
Platte

121393357
C20302-A10-C66: RNCC: 3 | RNVC: 2
C20302A10C66: RNCC: 5 | RNVC: 2
TFS31-98976: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-6568
Bow Handle

123196568
503889: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-177-0543
Nut And Bolt Locking Plate

121770543
51908010043: RNCC: 3 | RNVC: 2
5000270002: RNCC: 5 | RNVC: 2

9 Jan 1979

5340-12-304-1914
Hand Crank

123041914
DIN469-F80X12-GT: RNCC: 2 | RNVC: 2

21 Jun 1985

5340-12-385-6838
Extension Handle

123856838
IBUV M6 1000: RNCC: 3 | RNVC: 2
4007220660782: RNCC: 5 | RNVC: 2

29 Jun 2011

5340-12-355-1433
Double Angle Bracket

123551433
4604922841: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-334-6083
Support Hook

123346083
8 691 322 821: RNCC: 3 | RNVC: 2

30 May 1994

5340-12-319-5552
Electrical-Mechanical Equipment Post

123195552
4900059-751521.006.0: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-357-7965
Handle Grip

123577965
1661-182700.000.0: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-378-9751
Dust And Moisture Seal Protective Plug

123789751
R-3700523-460: RNCC: 3 | RNVC: 2
R-3700523-460: RNCC: 5 | RNVC: 9

8 Jun 2009

5340-12-131-5619

5340-12-040-0950

5340-12-390-2755
Mounting Plate

123902755
316476: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-12-317-3254
Flare Lock Fastener

123173254
RP650542: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-360-3530
Spring Tension Clip

123603530
0009550500: RNCC: 3 | RNVC: 2
0009550500: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-092-2667

5340-12-348-0317
Mounting Bracket

123480317
58R059-84615-2: RNCC: 2 | RNVC: 2
58R059-84615-2: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-011-5096

5340-12-349-8818
Snap Hook

123498818
215.131420: RNCC: 3 | RNVC: 2
13.1420: RNCC: 5 | RNVC: 9

20 Jan 2000

5340-12-171-1025
Access Cover

121711025
1250 307 376: RNCC: 3 | RNVC: 2
02967822: RNCC: 5 | RNVC: 2
2967822EY5055-53: RNCC: 5 | RNVC: 2
7701015064: RNCC: 5 | RNVC: 2
7701015064: RNCC: 5 | RNVC: 9
1250307376: RNCC: 5 | RNVC: 9

7 Sep 1977

5340-12-390-2651
Bumper

123902651
314588: RNCC: 3 | RNVC: 2

23 Oct 2012

5340-12-196-2249
Resilient Mount

121962249
81962105011: RNCC: 3 | RNVC: 2

14 Jun 1983

5340-12-197-5314
Rod End Clevis

121975314
1809115100: RNCC: 3 | RNVC: 2
0002522414: RNCC: 5 | RNVC: 2

28 Oct 1983

5340-12-381-3634
Pipe Hanger

123813634
10184-243010.000.0: RNCC: 2 | RNVC: 2
10184-243010.000.0: RNCC: 3 | RNVC: 2

5 Feb 2010

5340-12-307-4228
Elastic Cord Assembly

123074228
7358: RNCC: 3 | RNVC: 2
2996.62.66: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-12-358-8904
Mounting Bracket

123588904
6505200333: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-310-1746
Butt Hinge

123101746
4617200637: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-12-315-1221
Mending Plate

123151221
7315 003 185: RNCC: 3 | RNVC: 2
000 265 01 85: RNCC: 5 | RNVC: 2
0002650185: RNCC: 5 | RNVC: 2
7315003185: RNCC: 5 | RNVC: 9

17 Sep 1988

5340-12-306-8634
Spring Tension Clip

123068634
525631031: RNCC: 3 | RNVC: 2

11 Apr 1986

5340-12-338-3141
Mounting Plate

123383141
03420700: RNCC: 3 | RNVC: 2
03420700.273: RNCC: 5 | RNVC: 2
034 207 00: RNCC: 5 | RNVC: 9

21 Jun 1995

5340-12-313-2189
Angle Bracket

123132189
2493834: RNCC: 3 | RNVC: 2
2493834EZ5022-71: RNCC: 5 | RNVC: 2

11 Mar 1988

5340-12-302-0631
Angle Bracket

123020631
3818310214: RNCC: 3 | RNVC: 2

29 Nov 1984

5340-12-168-2808
Loop Clamp

121682808
LN9490B15: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-183-6325
Retaining Strap

121836325
42022343: RNCC: 3 | RNVC: 2
42022343EE5022-59: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-094-0303

5340-12-319-6874
Angle Bracket

123196874
620-103: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-12-179-1504
Electrical-Mechanical Equipment Post

121791504
CF 418 487 A: RNCC: 2 | RNVC: 2
VG95148A10XM3X20-AL: RNCC: 2 | RNVC: 2
VG95148A10XM3X20-AL: RNCC: 3 | RNVC: 2
CF 418 487 A: RNCC: 3 | RNVC: 2
CF 418 487 A: RNCC: 5 | RNVC: 2
CF418487A: RNCC: 5 | RNVC: 2
CF 418 487 A: RNCC: 5 | RNVC: 2
CF418487A: RNCC: 5 | RNVC: 2
CF418487A: RNCC: 5 | RNVC: 2

11 Jun 1979

5340-12-373-0548
Retaining Strap

123730548
1601091-0700: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-12-363-4701
Double Angle Bracket

123634701
J21520171-401: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-192-3160
Catch Strike

121923160
80001894: RNCC: 3 | RNVC: 2
80001894EE5511-29: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-363-0462
Manual Control Handle

123630462
GD-E32: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-195-7379
Compression Cup

121957379
1-003-76-51-08: RNCC: 3 | RNVC: 2
1-003-76-51-08: RNCC: 5 | RNVC: 9

6 Apr 1983

5340-12-359-6069
Runner

123596069
6000004-312400: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-342-0866
Angle Bracket

123420866
6700019-201410.01: RNCC: 2 | RNVC: 2
6700019-201410.01: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-12-197-3555
Angle Bracket

121973555
5801352-7320.03: RNCC: 3 | RNVC: 2
5801352-7320-03: RNCC: 5 | RNVC: 2
5801352-7320-03: RNCC: 5 | RNVC: 9
5801352-7320.03: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-146-8255
Loop Clamp

121468255
B541-117A2E: RNCC: 3 | RNVC: 2
2741027103: RNCC: 5 | RNVC: 2
5800334-6000-262: RNCC: 5 | RNVC: 2
27410 27103: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-377-6306
Block Clamp

123776306
312335: RNCC: 3 | RNVC: 2
5281-07-10-00/37: RNCC: 5 | RNVC: 2

29 Jan 2009

5340-12-366-8760
Butt Hinge

123668760
S257M6037211: RNCC: 2 | RNVC: 2
S257M6037211: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-190-0396
Dust And Moisture Seal Protective Plug

121900396
8060 040 114: RNCC: 3 | RNVC: 2
8060040114: RNCC: 5 | RNVC: 2
8198911: RNCC: 5 | RNVC: 2
01268650: RNCC: 5 | RNVC: 2
1268650EY8751-13: RNCC: 5 | RNVC: 2
8060040114: RNCC: 5 | RNVC: 9

4 Nov 1981

5340-12-363-2691
Angle Bracket

123632691
160-31061-09: RNCC: 3 | RNVC: 2

19 May 2004

5340-12-153-6793
Bow Handle

121536793
5810014: RNCC: 3 | RNVC: 2
1018269: RNCC: 5 | RNVC: 2
1BKA6: RNCC: 5 | RNVC: 2
47806: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-6423
Elastic Strap

123566423
705403801: RNCC: 3 | RNVC: 2
70 540 3801: RNCC: 5 | RNVC: 2

19 Mar 2002

5340-12-183-1054
Mending Plate

121831054
42002468EE5048-75: RNCC: 3 | RNVC: 2
42002468: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-307-3360
Mending Plate

123073360
42035041E5021-68: RNCC: 3 | RNVC: 2

5 Jun 1986

5340-12-164-1039
Loop Clamp

121641039
DIN3016-1-E2-14-14X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-14-14X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.2X14/15: RNCC: 3 | RNVC: 2
4209215014: RNCC: 5 | RNVC: 2
RSGU2X14-15: RNCC: 5 | RNVC: 2
RSGU2X14/15: RNCC: 5 | RNVC: 2
DIN3016-E2-14-14X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-128-8396
Resilient Mount

121288396
845-A26.13819/1.4-CR45.MS: RNCC: 3 | RNVC: 2
1201 8719: RNCC: 3 | RNVC: 2
12018719: RNCC: 5 | RNVC: 2
A26.13819/1.4: RNCC: 5 | RNVC: 2
A26-13819-1-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-4925
Access Cover

123934925
1-91573-2-FT001-Y01-AA: RNCC: 3 | RNVC: 2
106417: RNCC: 5 | RNVC: 2

19 Sep 2013

5340-12-703-1099
Pawl Fastener

127031099
VG95211-ML-127031099: RNCC: 2 | RNVC: 2
155N1137-1: RNCC: 3 | RNVC: 2
0500802793879: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-164-9128
Loop Clamp

121649128
F13TAN15802-1-4544-9: RNCC: 3 | RNVC: 2
F13TAN15802N: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-700-2765
Butt Hinge Leaf

127002765
51-270455034: RNCC: 2 | RNVC: 2
765-65-207SL: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-12-161-3074
Dust And Moisture Seal Protective Cap

121613074
160-88550-01: RNCC: 3 | RNVC: 2
160-88550-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-7678
Angle Bracket

121837678
5801225-60000.09: RNCC: 2 | RNVC: 2
5801225-60000-09: RNCC: 3 | RNVC: 2
5801225-60000.09: RNCC: 3 | RNVC: 2
5801225-60000.09: RNCC: 5 | RNVC: 9

20 May 1980

5340-12-350-6026
Mending Plate

123506026
205388: RNCC: 3 | RNVC: 2
94095-117.04: RNCC: 5 | RNVC: 2

19 Apr 2000

5340-12-326-9646
Angle Bracket

123269646
5802161-202110.00: RNCC: 2 | RNVC: 2
5802161-202110.00: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-12-393-7705
Lock-Release Lever

123937705
1103334: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-360-0060
Mounting Bracket

123600060
9415403373: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-321-3584
Loop Clamp

123213584
600721570: RNCC: 3 | RNVC: 2
81.97640.0185: RNCC: 5 | RNVC: 2
81976400185: RNCC: 5 | RNVC: 2

9 May 1990

5340-12-362-9255
Mechanic Equipment Hardware Kit

123629255
21101-487: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-12-374-2909
Loop Clamp

123742909
5324692: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-199-7987
Shimmy Damper

121997987
0021600306060: RNCC: 3 | RNVC: 2
0306060: RNCC: 5 | RNVC: 2

31 May 1984

5340-12-182-9715
Webbing Strap

121829715
5801697-13100.00: RNCC: 2 | RNVC: 2
5801697-13100.00: RNCC: 3 | RNVC: 2
5801697-13100-00: RNCC: 5 | RNVC: 2
5801697-13100.00: RNCC: 5 | RNVC: 9
000-F1-25X2,5X1200-PE-RAL6031: RNCC: 6 | RNVC: 9

11 Mar 1980

5340-12-328-0976
Nonmetallic Bumper

123280976
DIN95364-A15X6-M4X10-NR55ST: RNCC: 2 | RNVC: 2
D15X6-M4X10-55SHORE: RNCC: 5 | RNVC: 2
530011-M4X10.NR55.ST: RNCC: 5 | RNVC: 2
350-402-009: RNCC: 5 | RNVC: 2
VG95364-A15X6-M4X10-NR55ST: RNCC: 5 | RNVC: 9

7 Apr 1992

5340-12-332-4326
Mending Plate

123324326
0851 7753.072: RNCC: 3 | RNVC: 2
0851 7564.088: RNCC: 5 | RNVC: 2
8517564FA T.88: RNCC: 5 | RNVC: 9
8517753FA T.72: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-317-6799
Retaining Strap

123176799
1000173-380000.002.0: RNCC: 2 | RNVC: 2
1000173-380000.002.0: RNCC: 3 | RNVC: 2

28 Apr 1989

5340-12-331-0349
Dust And Moisture Seal Protective Cap

123310349
GR4016T910: RNCC: 3 | RNVC: 2
GR4016T910: RNCC: 5 | RNVC: 9
2305732: RNCC: 5 | RNVC: 9
GR 4016 T 910: RNCC: 5 | RNVC: 9

15 Mar 1993

5340-12-388-6397
Sash Pole

123886397
122W187660.000.0: RNCC: 2 | RNVC: 2
122W187660.000.0: RNCC: 3 | RNVC: 2
122W187660.000.0: RNCC: 5 | RNVC: 9

5 Apr 2012

5340-12-128-1271

5340-12-188-9133
Retaining Strap

121889133
SP05375: RNCC: 3 | RNVC: 2
20.4.100.6001: RNCC: 5 | RNVC: 9
2041006001: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-351-5065
Mounting Bracket

123515065
4615401773: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-332-4718
Mending Plate

123324718
0851 7753.101: RNCC: 3 | RNVC: 2
8517753FA T.101: RNCC: 5 | RNVC: 9

13 Aug 1993

5340-12-309-2447
Manual Control Handle

123092447
09.21249.010-3: RNCC: 3 | RNVC: 2

6 Jan 1987

5340-12-199-7058
Pawl Fastener

121997058
0287 8742: RNCC: 3 | RNVC: 2
2878742: RNCC: 5 | RNVC: 2
2878742ED0693-60: RNCC: 5 | RNVC: 2

24 May 1984

5340-12-173-6609
Angle Bracket

121736609
4354920041: RNCC: 3 | RNVC: 2

28 Apr 1978

5340-12-159-3106
Buckle

121593106
3220064: RNCC: 3 | RNVC: 2
32116: RNCC: 5 | RNVC: 2
81968052003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-338-8171
Spring Tension Clip

123388171
001845-U: RNCC: 3 | RNVC: 2
08 56 563: RNCC: 3 | RNVC: 2
856563: RNCC: 5 | RNVC: 2
90323550: RNCC: 5 | RNVC: 2

28 Aug 1995

5340-12-393-5694
Mounting Plate

123935694
4100098-722060.001.0: RNCC: 2 | RNVC: 2
4100098-722060.001.0: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-307-8158
Mending Plate

123078158
2500179-350700.011.0: RNCC: 2 | RNVC: 2
2500179-350700.011.0: RNCC: 3 | RNVC: 2

29 Jul 1986

5340-12-164-1172
Mending Plate

121641172
4-73700: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-313-6812
Access Cover

123136812
5.035.211.0: RNCC: 3 | RNVC: 2

26 Apr 1988

Load More Results