What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 91 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 91 of 178

5340-12-197-0429
Bow Handle

121970429
4358157036: RNCC: 3 | RNVC: 2
4358157036: RNCC: 5 | RNVC: 9

13 Sep 1983

5340-12-178-7242
Retaining Band

121787242
81974605132: RNCC: 3 | RNVC: 2

14 May 1979

5340-12-186-3070
Dust And Moisture Seal Protective Cap

121863070
02514669: RNCC: 3 | RNVC: 2
04465411: RNCC: 5 | RNVC: 2
2514669UD5046-04: RNCC: 5 | RNVC: 2
4465411KZ5046-04: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-315-9691
Access Cover

123159691
111-00-8832-0573/06-00-002: RNCC: 2 | RNVC: 2
1000232-06-00-00-00-002: RNCC: 3 | RNVC: 2
111-00-8832-0573/06-00-002: RNCC: 5 | RNVC: 9

9 Dec 1988

5340-12-318-5083
Strap Hinge Leaf

123185083
2002.10.11.000-01: RNCC: 3 | RNVC: 9

21 Jul 1989

5340-12-312-2055
Access Cover

123122055
3390-1100.11: RNCC: 3 | RNVC: 2

3 Dec 1987

5340-12-344-8519
Nonmetallic Bumper

123448519
8100592-5900: RNCC: 3 | RNVC: 2

18 Dec 1997

5340-12-379-5623
Mounting Bracket

123795623
12250000020: RNCC: 3 | RNVC: 2
FK25: RNCC: 5 | RNVC: 2
418-1484: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-12-164-7205
Hinge Torsion Bar

121647205
160-73419-03: RNCC: 3 | RNVC: 2
160-73419-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-338-5320
Access Cover

123385320
8353 552: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-12-194-2452
Nonmetallic Bumper

121942452
281513381: RNCC: 3 | RNVC: 2

14 Oct 1982

5340-12-392-3620
Pipe Hanger

123923620
I010906: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-394-4969
Mounting Bracket

123944969
L321M1028101: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-389-1506
Expansion Shield

123891506
924215: RNCC: 3 | RNVC: 2
924215: RNCC: 5 | RNVC: 2
2500601457: RNCC: 5 | RNVC: 2
07402081: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-187-9951
Halter

121879951
03066501: RNCC: 3 | RNVC: 2
29.07.19AB: RNCC: 5 | RNVC: 9
03066501.294: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-315-3049
Angle Bracket

123153049
6175010420: RNCC: 3 | RNVC: 2
617 501 04 20: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-393-7363
Mechanical Stop

123937363
1094810: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-172-4620
Bow Handle

121724620
220ESL: RNCC: 3 | RNVC: 2
220ESL: RNCC: 5 | RNVC: 9

23 Jan 1978

5340-12-316-1510
Door Handle

123161510
3097661201: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-367-4831
Butt Hinge Leaf

123674831
2695678: RNCC: 3 | RNVC: 2

24 Aug 2005

5340-12-366-3206
Catch Strike

123663206
943275043: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-12-317-4799
Door Button

123174799
251813789: RNCC: 3 | RNVC: 2
251813789: RNCC: 5 | RNVC: 2
251813789: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-173-8525
Loop Clamp

121738525
PAN4231BB2817: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-353-5558
Runner

123535558
11590701: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-12-339-1035
Butt Hinge

123391035
238 215-92000: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-12-339-8426
Bow Handle

123398426
EBAA001: RNCC: 3 | RNVC: 2
EB AA 001: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-317-8850
Access Cover

123178850
40 0166 680: RNCC: 2 | RNVC: 2
40 0166 680: RNCC: 3 | RNVC: 2
40 0166 680: RNCC: 5 | RNVC: 9

23 May 1989

5340-12-334-0954
Flare Lock Fastener

123340954
80186729901C: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-12-339-0308
Mounting Bracket

123390308
0008630224: RNCC: 3 | RNVC: 2
13.09.501.00: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-12-366-1388
Webbing Strap

123661388
42540/5500-09: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-345-8841
Plug Button

123458841
4153-465: RNCC: 3 | RNVC: 2
4153465: RNCC: 5 | RNVC: 2

12 May 1998

5340-12-176-1841
Loop Clamp

121761841
PAN6636B12: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-351-2051
Spacing Threaded Standoff

123512051
3099-00-210000.03: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-12-179-8479
Angle Bracket

121798479
3614028007: RNCC: 3 | RNVC: 2
5801513-0180-002: RNCC: 5 | RNVC: 2
36140 28007: RNCC: 5 | RNVC: 9
5801513-0180-002: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-334-4153
Dust And Moisture Seal Protective Plug

123344153
MB 800-070: RNCC: 3 | RNVC: 2
0895027070: RNCC: 5 | RNVC: 2
037350: RNCC: 5 | RNVC: 2

5 May 1994

5340-12-197-0023
Mending Plate

121970023
4358117011: RNCC: 3 | RNVC: 2

8 Sep 1983

5340-12-336-0431
Multiple Angle Bracket

123360431
160-89027-01: RNCC: 3 | RNVC: 2
160-89027-01: RNCC: 5 | RNVC: 9

14 Oct 1994

5340-12-197-0459
Resilient Mount

121970459
86003318: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-12-344-5544
Angle Bracket

123445544
2396-601100.07: RNCC: 3 | RNVC: 2

6 Nov 1997

5340-12-355-1573
Double Angle Bracket

123551573
2760.1395: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-358-9617
Angle Bracket

123589617
2300074-4160.00: RNCC: 2 | RNVC: 2
2300074-4160.00: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-377-1329
Loop Clamp

123771329
41231087: RNCC: 3 | RNVC: 2
41231087EZ: RNCC: 5 | RNVC: 2

12 Dec 2008

5340-12-390-0479
Mechanic Equipment Hardware Kit

123900479
117-950451: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-180-2136
Angle Bracket

121802136
42035556EZ5035-71: RNCC: 3 | RNVC: 2
42035556: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-172-1254
Casement Fastener

121721254
N00A0800210104A: RNCC: 3 | RNVC: 2
00008210104A: RNCC: 5 | RNVC: 2
N00A0800210104A: RNCC: 5 | RNVC: 9
00008210104A: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-362-6154
Mounting Bracket

123626154
10020830: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-143-0338
Retaining Strap

121430338
2360-012000.34.0: RNCC: 2 | RNVC: 2
2360-012000-34-0: RNCC: 5 | RNVC: 2
2360-012000.34.0: RNCC: 5 | RNVC: 2
2360-012000-34-0: RNCC: 5 | RNVC: 2
2360-012000.34.0: RNCC: 5 | RNVC: 2
2360-012000.34.0: RNCC: 5 | RNVC: 9
2360-012000-34-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-5791
Resilient Mount

121905791
2-01-007411-01: RNCC: 3 | RNVC: 9
C 3695 634: RNCC: 5 | RNVC: 2
C3695634: RNCC: 5 | RNVC: 2
C3695634: RNCC: 5 | RNVC: 2
C 3695 634: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-363-8473
Mounting Bracket

123638473
J28230099-403: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-363-9072
Angle Bracket

123639072
J92226804-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-131-5498

5340-12-329-4703
Mending Plate

123294703
4618202414: RNCC: 3 | RNVC: 2

21 Aug 1992

5340-12-346-2606
Angle Bracket

123462606
55.2502.109.40: RNCC: 3 | RNVC: 2

3 Jul 1998

5340-12-345-6946
Retaining Strap

123456946
20: RNCC: 3 | RNVC: 2
3475504: RNCC: 5 | RNVC: 2

16 Apr 1998

5340-12-345-6070
Angle Bracket

123456070
033251368: RNCC: 3 | RNVC: 2
033 251 368: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-12-302-0837
Nonmetallic Bumper

123020837
3878910323: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-354-9068
Mechanical Stop

123549068
5400049-621150.00: RNCC: 2 | RNVC: 2
5400049-621150.00: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-331-1946
Headless Straight Rod

123311946
226.67.205: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-12-025-8943

5340-12-326-7277
Filler Opening Cap

123267277
0730010374: RNCC: 3 | RNVC: 2
2050000053: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-12-373-4295
Access Cover

123734295
5241880102: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-12-026-5682

5340-12-380-6139
Mounting Bracket

123806139
8832030640: RNCC: 3 | RNVC: 2

12 Nov 2009

5340-12-314-0861
Butt Hinge Leaf

123140861
272.302 817: RNCC: 2 | RNVC: 2
272.302.817: RNCC: 3 | RNVC: 2
272.302 817: RNCC: 5 | RNVC: 9

4 Jun 1988

5340-12-318-4687
Angle Bracket

123184687
81155015415: RNCC: 3 | RNVC: 2
81.15501.5415: RNCC: 5 | RNVC: 2

18 Jul 1989

5340-12-348-4596
Access Cover

123484596
100026476: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-328-5351
Mending Plate

123285351
2300354-889911-001: RNCC: 2 | RNVC: 2
07655-820012-99: RNCC: 5 | RNVC: 9

28 May 1992

5340-12-190-7583
Retaining Strap

121907583
DIN72571-1X4-ST: RNCC: 2 | RNVC: 2
DIN72571-1X4-ST: RNCC: 3 | RNVC: 2
1X4DIN72571ST: RNCC: 5 | RNVC: 2

14 Dec 1981

5340-12-393-7161
Mounting Bracket

123937161
11.29225-0066: RNCC: 3 | RNVC: 2
11.29225-0066: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-305-0825
Access Hole Frame

123050825
5802017-521000.00: RNCC: 2 | RNVC: 2
5802017-521000.00: RNCC: 3 | RNVC: 2

24 Sep 1985

5340-12-157-7300
Nonmetallic Bumper

121577300
4-7820-942: RNCC: 3 | RNVC: 2
7820942: RNCC: 5 | RNVC: 2
1092106-6307: RNCC: 5 | RNVC: 9
016942-4: RNCC: 5 | RNVC: 9
4-7820-942: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-9388
Case Corner

123089388
P-244714-753: RNCC: 3 | RNVC: 2
P244714-753: RNCC: 5 | RNVC: 2

28 Nov 1986

5340-12-192-8505
Clamping Catch

121928505
8-4247.00: RNCC: 2 | RNVC: 2
8-4247.00: RNCC: 3 | RNVC: 2
8-4247.00: RNCC: 3 | RNVC: 9
8-4247-00: RNCC: 5 | RNVC: 2
8-4247-00: RNCC: 5 | RNVC: 9
8-4247.00: RNCC: 5 | RNVC: 9

27 May 1982

5340-12-320-1101
Manual Control Handle

123201101
DIN99-N50-1.4305: RNCC: 2 | RNVC: 2
DIN99-50-M6-N-NI: RNCC: 3 | RNVC: 2
06330-206-1.4305: RNCC: 3 | RNVC: 2
DIN99-N50-A1-50: RNCC: 5 | RNVC: 2
NLM633-206-1.4305: RNCC: 5 | RNVC: 9
NLM6330-206-1.4305: RNCC: 5 | RNVC: 9

7 Dec 1989

5340-12-361-4295
Mounting Plate

123614295
2500262-190540.003.0: RNCC: 2 | RNVC: 2
2500262-190540.003.0: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-197-9885
Resilient Mount

121979885
LV8100416-1000-03: RNCC: 2 | RNVC: 2
H160-267-107-138-8-FF: RNCC: 3 | RNVC: 2
8100146-1000-02: RNCC: 5 | RNVC: 2
CF 2/91042: RNCC: 5 | RNVC: 2
H160-267-107-138-8FF: RNCC: 5 | RNVC: 2
H160-267-110-135-8-FF: RNCC: 5 | RNVC: 2
16205-146-1000-02: RNCC: 5 | RNVC: 9
8100416-1000-03: RNCC: 5 | RNVC: 9
LV 8100146-1000-02: RNCC: 5 | RNVC: 9

8 Dec 1983

5340-12-368-1324
Mounting Bracket

123681324
5161-350000A01B: RNCC: 2 | RNVC: 2
5161-350000A01B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-378-2847
Spacing Threaded Standoff

123782847
J04823252-027: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-12-380-9781
Dust And Moisture Seal Protective Plug

123809781
91693: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-12-394-2413
Helical Compression Spring Seat

123942413
4373250126: RNCC: 3 | RNVC: 2
7130557: RNCC: 5 | RNVC: 2

13 Nov 2013

5340-12-042-3561

5340-12-380-5468
Multiple Angle Bracket

123805468
105-62101.20: RNCC: 3 | RNVC: 2

6 Nov 2009

5340-12-372-1054
Angle Bracket

123721054
7004436: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-12-393-7253
Lock Bolt

123937253
G32998: RNCC: 3 | RNVC: 2
F21.7381-01-13-10.00-44: RNCC: 5 | RNVC: 9

7 Oct 2013

5340-12-196-4760
Bridge Clamp

121964760
C22156-A1000-B816: RNCC: 3 | RNVC: 2
C22156A1000B816: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-155-4765
Nonmetallic Bumper

121554765
160-73008-22: RNCC: 3 | RNVC: 2
160-73008-22: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-4633
Webbing Strap

123284633
2300354-949900.003: RNCC: 2 | RNVC: 2
70701-140069-99: RNCC: 5 | RNVC: 2
70701-140069-99: RNCC: 5 | RNVC: 9

21 May 1992

5340-12-366-9741
Mounting Bracket

123669741
2300421-204831.000: RNCC: 2 | RNVC: 2
2300421-204831.000: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-317-3200
Mounting Bracket

123173200
4900064-4121.002: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-354-8231
Access Cover

123548231
J52423013-001: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-175-5065
Handle Grip

121755065
12709-13100.002: RNCC: 2 | RNVC: 2
333008-0202.000: RNCC: 3 | RNVC: 2
12709-13100.002: RNCC: 5 | RNVC: 2
12709-13100-002: RNCC: 5 | RNVC: 9
333008-0202.000: RNCC: 5 | RNVC: 9
12709-13100-002: RNCC: 5 | RNVC: 9

25 Sep 1978

5340-12-345-3111
Mounting Bracket

123453111
5803674-215200.00: RNCC: 2 | RNVC: 2
7804234820: RNCC: 3 | RNVC: 2
5803674-215200.00: RNCC: 5 | RNVC: 2
78042 34820: RNCC: 5 | RNVC: 9

2 Mar 1998

5340-12-316-2247
Mounting Bracket

123162247
5802261-570000.000: RNCC: 2 | RNVC: 2
5802261-570000.000: RNCC: 3 | RNVC: 2

2 Jan 1989

5340-12-380-7573
Bow Handle

123807573
MBBN737-4L: RNCC: 3 | RNVC: 2

25 Nov 2009

5340-12-379-6037
Webbing Strap

123796037
601241-301420.00: RNCC: 2 | RNVC: 2
601241-301420.00: RNCC: 3 | RNVC: 2

13 Aug 2009

5340-12-319-9222
Dust And Moisture Seal Protective Cap

123199222
193707: RNCC: 3 | RNVC: 2
5000590059: RNCC: 5 | RNVC: 2

17 Nov 1989

5340-12-316-4716
Mounting Bracket

123164716
54.0026.268.00: RNCC: 3 | RNVC: 2
54002626800: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-362-5724
Dust And Moisture Seal Protective Plug

123625724
12151365: RNCC: 3 | RNVC: 2

6 Mar 2004

5340-12-393-6591
Lock Bar

123936591
03099-1040510: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-390-0499
Loop Clamp

123900499
316721: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-316-8927
Friction Catch Stud

123168927
2300279-9745.01: RNCC: 2 | RNVC: 2
2300279-9745.01: RNCC: 3 | RNVC: 2
2300279-9745.01: RNCC: 5 | RNVC: 9
9876311: RNCC: 5 | RNVC: 9

22 Feb 1989

5340-12-380-9730
Dust And Moisture Seal Protective Cap

123809730
2028160: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-12-197-5580
Pad Eye

121975580
3127250380: RNCC: 3 | RNVC: 2

2 Nov 1983

5340-12-042-5884

5340-12-161-0941
Dust And Moisture Seal Protective Plug

121610941
160-26437-58: RNCC: 3 | RNVC: 2
160-26437-58: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-9917
Veh Mounting Rail

123759917
0.0.356.02: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-12-307-5379
Retaining Strap

123075379
6113001: RNCC: 3 | RNVC: 2

30 Jun 1986

5340-12-135-6748

5340-12-040-6384

5340-12-150-8852
Loop Clamp

121508852
100298-110: RNCC: 2 | RNVC: 2
100298-110: RNCC: 5 | RNVC: 2
100298-110: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-357-2710
Antipilferage Seal

123572710
0005421490: RNCC: 3 | RNVC: 2
1324.90 02 03 00: RNCC: 5 | RNVC: 2

28 May 2002

5340-12-043-2697

5340-12-302-1418
Webbing Strap

123021418
503898: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-384-6913
Runner

123846913
S005825: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-184-2337
Lagerung

121842337
211827423: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-334-1089
Retaining Strap

123341089
0A610.54-06-08-00-001: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-12-172-9802
Handle Grip

121729802
651130: RNCC: 3 | RNVC: 2
117-100-0004: RNCC: 5 | RNVC: 2
TK-BA35-5340-041: RNCC: 5 | RNVC: 2

9 Mar 1978

5340-12-337-6804
Nonmetallic Bumper

123376804
E5074-403-28: RNCC: 3 | RNVC: 2

27 Mar 1995

5340-12-182-5039
Manual Control Handle

121825039
589135: RNCC: 3 | RNVC: 2
6-412-845: RNCC: 5 | RNVC: 2
6.412-845.0: RNCC: 5 | RNVC: 2
3922-0005-589135: RNCC: 5 | RNVC: 2
3923-0005-589135: RNCC: 5 | RNVC: 2
4NAN2160: RNCC: 5 | RNVC: 2
4NAN2160-06: RNCC: 5 | RNVC: 2
6.412-845: RNCC: 5 | RNVC: 9

8 Feb 1980

5340-12-196-9026
Angle Bracket

121969026
A-296657-411: RNCC: 3 | RNVC: 2
A296657-411: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-187-4932
Detent Plunger

121874932
DIN6311-S25: RNCC: 2 | RNVC: 2
DIN6311-25-S: RNCC: 5 | RNVC: 2
S25DIN6311: RNCC: 5 | RNVC: 2
S25HWN319: RNCC: 5 | RNVC: 2
07140-12: RNCC: 5 | RNVC: 2
DIN6311-S25: RNCC: 5 | RNVC: 2
02332-25MM: RNCC: 5 | RNVC: 2
S25DIN6311: RNCC: 5 | RNVC: 2
NLM714-12: RNCC: 5 | RNVC: 9
NLM7140-12: RNCC: 5 | RNVC: 9

10 Apr 1981

5340-12-182-8384
Webbing Strap

121828384
820-1195-01-1: RNCC: 3 | RNVC: 2

27 Feb 1980

5340-12-318-7653
Double Angle Bracket

123187653
704-126230-901-0: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-199-9253
Hook Handle

121999253
251.1: RNCC: 3 | RNVC: 2
C123-Z8-C156: RNCC: 5 | RNVC: 2

19 Jun 1984

5340-12-368-5862
Mounting Plate

123685862
2300007-220024.001.0: RNCC: 2 | RNVC: 2
2300007-220024.001.0: RNCC: 3 | RNVC: 2
1712902: RNCC: 5 | RNVC: 9

28 Mar 2006

5340-12-352-5061
Mounting Bracket

123525061
P-295562-003: RNCC: 3 | RNVC: 2
P295562-003: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-12-375-2223
Protection Bellows

123752223
L281M2001227: RNCC: 3 | RNVC: 2

6 May 2008

5340-12-368-6412
Flush Lock

123686412
101797: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-12-327-1503
Angle Bracket

123271503
0289 7449: RNCC: 3 | RNVC: 2

6 Dec 1991

5340-12-335-6517
Extension Drawer Slide

123356517
54.1063.000.82: RNCC: 3 | RNVC: 2
54.1063.000.82: RNCC: 5 | RNVC: 2
54.1063.000.82LV: RNCC: 5 | RNVC: 2
GM501-711/810MM: RNCC: 5 | RNVC: 9

8 Sep 1994

5340-12-358-4242
Access Cover

123584242
2500262-190232.000.0: RNCC: 2 | RNVC: 2
2500262-190232.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-330-3089
Electrical-Mechanical Equipment Post

123303089
2130947: RNCC: 3 | RNVC: 2
75 E 7.297-04: RNCC: 5 | RNVC: 2

1 Dec 1992

5340-12-322-0158
Resilient Mount

123220158
742034S7-60SHORE: RNCC: 3 | RNVC: 2
5718224-11MN60: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-011-5044

5340-12-387-4663
Loop Clamp

123874663
367121-02: RNCC: 3 | RNVC: 2
367 121-02: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-12-374-2812
Spring Holder

123742812
5304234: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-12-321-6529
Mounting Bracket

123216529
0100 308704: RNCC: 3 | RNVC: 2
308704: RNCC: 5 | RNVC: 2

12 Jun 1990

5340-12-162-8527
Loop Clamp

121628527
2217028706: RNCC: 3 | RNVC: 2
22170 28706: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-122-4118
Plain Solid Disk

121224118
3153571152: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-335-0569
Caster Wheel

123350569
950163: RNCC: 3 | RNVC: 2
ITP200X50DIA025: RNCC: 5 | RNVC: 2

18 Jul 1994

5340-12-340-2067
Access Door Hinge

123402067
9894029: RNCC: 3 | RNVC: 9
463-611310.000: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-12-315-3679
Mounting Bracket

123153679
02492931: RNCC: 3 | RNVC: 2
2492931EZ5012-58: RNCC: 5 | RNVC: 2

15 Oct 1988

5340-12-328-8957
Webbing Strap

123288957
065-350000.03: RNCC: 3 | RNVC: 2
065-350000.03: RNCC: 5 | RNVC: 2
065-350000.03: RNCC: 5 | RNVC: 9

30 Jun 1992

5340-12-307-1242
Handwheel

123071242
2510 3896 20: RNCC: 3 | RNVC: 9
2510389620: RNCC: 5 | RNVC: 9

13 May 1986

5340-12-368-5102
Bow Handle

123685102
1030014-122011.000.0: RNCC: 2 | RNVC: 2
1030014-122011.000.0: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-12-365-3908
Helical Compression Spring Seat

123653908
2500267-331100.001.0: RNCC: 2 | RNVC: 2
2500267-331100.001.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-380-7283
Loop Clamp

123807283
215PPH DP AS M W2: RNCC: 3 | RNVC: 2
21244: RNCC: 5 | RNVC: 2
81974456031: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-12-358-6813
Mechanical Stop

123586813
2719-514200.003.0: RNCC: 2 | RNVC: 2
2719-514200.003.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-389-1747
Access Cover

123891747
R.MKA1.3230.00: RNCC: 2 | RNVC: 2
R.MKA1.3230.00: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-358-7378
Angle Bracket

123587378
2500262-394285.006.0: RNCC: 2 | RNVC: 2
2500262-394285.006.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-196-6049
Butt Hinge Leaf

121966049
81626902020: RNCC: 3 | RNVC: 2
81.62690.20: RNCC: 5 | RNVC: 2

21 Jul 1983

5340-12-158-6848

5340-12-371-7869
Access Cover

123717869
4120301031: RNCC: 3 | RNVC: 2
7392081: RNCC: 5 | RNVC: 2

16 May 2007

5340-12-162-6230
An Scharnierlappen

5340-12-162-2199
An Scharnierlappen

5340-12-145-9222
Tuer Griff

5340-12-367-1134
Retaining Band

123671134
13764: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-12-177-2117
Loop Clamp

121772117
3815280443: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-12-161-9910
Einbau- Schlosz

5340-12-307-6579
Angle Bracket

123076579
537161-8507.000: RNCC: 3 | RNVC: 2
537161-8507.000: RNCC: 5 | RNVC: 9
537161-8507: RNCC: 5 | RNVC: 9

14 Jul 1986

5340-12-374-4376
Angle Bracket

123744376
160-20720-03: RNCC: 3 | RNVC: 2
160-20720.03: RNCC: 5 | RNVC: 2

18 Feb 2008

5340-12-190-9566
Dust And Moisture Seal Protective Plug

121909566
V14/131: RNCC: 3 | RNVC: 2

29 Dec 1981

5340-12-194-7051
Spring Loaded Cylinder Fastener

121947051
4900046-10003.00: RNCC: 3 | RNVC: 2
4900046-10003-00: RNCC: 5 | RNVC: 2

30 Nov 1982

5340-12-157-8885
Hinge Torsion Bar

121578885
2509-107-377: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-321-9912
Manual Control Handle

123219912
60817-052: RNCC: 3 | RNVC: 2

16 Jul 1990

5340-12-320-4314
Webbing Strap

123204314
335947-8013.000: RNCC: 2 | RNVC: 2
335947-8013.000: RNCC: 3 | RNVC: 2
335947-8013.000: RNCC: 5 | RNVC: 9
000-B3-22X2,0X110-PE-RAL6031: RNCC: 6 | RNVC: 9

15 Jan 1990

5340-12-300-2605
Double Angle Bracket

123002605
5801411-41252: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-356-0881
Mounting Bracket

123560881
J92228832-002: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-175-0166
Hasp Staple

121750166
44-25742: RNCC: 3 | RNVC: 2

16 Aug 1978

5340-12-377-6120
Retaining Strap

123776120
85156400001: RNCC: 3 | RNVC: 2
85.15640-0001: RNCC: 5 | RNVC: 2
88156400000 TEIL 85156400001: RNCC: 5 | RNVC: 2

28 Jan 2009

5340-12-174-1139
Helical Compression Spring Seat

121741139
8953629804: RNCC: 3 | RNVC: 2
42484340EY5069-28: RNCC: 5 | RNVC: 2
42484340: RNCC: 5 | RNVC: 2
1694-177: RNCC: 5 | RNVC: 2
8461955: RNCC: 5 | RNVC: 2

6 Jun 1978

5340-12-155-5530
Retaining Strap

121555530
160-71190-02: RNCC: 3 | RNVC: 2
160-71190-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-6292
Extension Drawer Slide

123136292
GC202-330RH: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-173-1664
Extension Drawer Slide Section

121731664
5801113-111108: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-12-171-0688
Case Corner

121710688
2837201-10040-03: RNCC: 3 | RNVC: 2

5 Sep 1977

5340-12-305-0508
Angle Bracket

123050508
5801759-161000.000: RNCC: 2 | RNVC: 2
5801759-161000.000: RNCC: 3 | RNVC: 2

20 Sep 1985

5340-12-302-6523
Dust And Moisture Seal Protective Cap

123026523
344991103: RNCC: 3 | RNVC: 2

21 Jan 1985

5340-12-190-8764
Helical Compression Spring Seat

121908764
2410320068: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-304-7856
Angle Bracket

123047856
0214 8937: RNCC: 3 | RNVC: 2
02148937EE0148-22: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-359-1618
Mounting Bracket

123591618
6592810340: RNCC: 3 | RNVC: 2

6 Jan 2003

5340-12-163-5666
Loop Clamp

121635666
LN9490B13: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-319-9292
Mending Plate

123199292
5802006-652100.00: RNCC: 2 | RNVC: 2
5802006-652100.00: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-305-5999
Loop Clamp

123055999
4069955344: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-329-1265
Dust And Moisture Seal Protective Cap

123291265
307.141-90300.06: RNCC: 3 | RNVC: 2

21 Jul 1992

5340-12-310-9750
Angle Bracket

123109750
03386500: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-346-4597
Rod End Clevis

123464597
071752008003: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-12-389-1043
Expansion Shield

123891043
073650: RNCC: 3 | RNVC: 2

29 May 2012

5340-12-321-6371
Dust And Moisture Seal Boot

123216371
25013501604: RNCC: 3 | RNVC: 2
61138080160: RNCC: 5 | RNVC: 2

11 Jun 1990

5340-12-197-0356
Dust And Moisture Seal Protective Plug

121970356
01TC34553: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-12-368-6900
Dust And Moisture Seal Protective Plug

123686900
45150: RNCC: 3 | RNVC: 2
45150: RNCC: 5 | RNVC: 2

6 Apr 2006

5340-12-365-3417
Stand Base

123653417
1601085-2220.03A: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-196-9892
Bow Handle

121969892
3818150436: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-12-393-0883
Angle Bracket

123930883
4000004754: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-12-198-6205
Webbing Strap

121986205
27 0322 323: RNCC: 2 | RNVC: 2
9837747: RNCC: 3 | RNVC: 2
270322323: RNCC: 5 | RNVC: 9
27 0322 323: RNCC: 5 | RNVC: 9
9837747: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-322-2317
Catch Strike

123222317
DIN3133-K25X83ZN12: RNCC: 2 | RNVC: 2

3 Aug 1990

5340-12-350-2089
Webbing Strap

123502089
4609835294: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-192-1353
Plug Button

121921353
1152670114: RNCC: 3 | RNVC: 2

29 Mar 1982

5340-12-090-0310

5340-12-189-4790
Rigid Caster

121894790
WW425920A: RNCC: 3 | RNVC: 9
WW 425 920 A: RNCC: 5 | RNVC: 2
WW425920A: RNCC: 5 | RNVC: 2
WW 425 920 A: RNCC: 5 | RNVC: 9

29 Sep 1981

5340-12-377-8166
Spring Loaded Cylinder Fastener

123778166
GN717-5-B: RNCC: 3 | RNVC: 2
GN717-5-B: RNCC: 5 | RNVC: 9

12 Feb 2009

5340-12-359-4950
Mounting Bracket

123594950
8-750052.000-4: RNCC: 2 | RNVC: 2
8-750052.000-4: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-368-2260
Rigid Caster

123682260
B-ALTH 80K: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-12-333-3936
Webbing Strap

123333936
5803553-226110.00: RNCC: 2 | RNVC: 2
5803553-226110.00: RNCC: 3 | RNVC: 2
000-E6-20X2,0X250-PE-RAL6031: RNCC: 6 | RNVC: 9

10 Dec 1993

5340-12-178-9434
Bow Handle

121789434
2300061-053060: RNCC: 2 | RNVC: 2

28 May 1979

5340-12-182-8971
Retaining Strap

121828971
45MAN217: RNCC: 3 | RNVC: 2
06.67150-0114: RNCC: 5 | RNVC: 2
06671500114: RNCC: 5 | RNVC: 2

4 Mar 1980

5340-12-152-3035
Anchor Strap

121523035
5800400-0100-002: RNCC: 3 | RNVC: 2
6P358-100-2: RNCC: 5 | RNVC: 2
5800400-0100-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-382-6163
Angle Bracket

123826163
29080: RNCC: 3 | RNVC: 2
600-61.5.321-059: RNCC: 5 | RNVC: 2

16 Jul 2010

5340-12-357-6933
Mounting Plate

123576933
3000-00-987000.03: RNCC: 3 | RNVC: 2

15 Jul 2002

5340-12-349-1778
Access Door Hinge

123491778
680003/7323-05-00-15: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-370-7235
Double Angle Bracket

123707235
1404002-000.01: RNCC: 2 | RNVC: 2
1404002-000.01: RNCC: 3 | RNVC: 2

13 Dec 2006

5340-12-317-2131
Mounting Plate

123172131
708-121100-909-0: RNCC: 3 | RNVC: 2
708-121100-909-0: RNCC: 5 | RNVC: 2

17 Mar 1989

5340-12-319-6147
Lock-Release Lever

123196147
E3-2025110: RNCC: 2 | RNVC: 2
E3-2025110: RNCC: 3 | RNVC: 2
E3-2025110: RNCC: 5 | RNVC: 9

18 Oct 1989

5340-12-194-9383
Bow Handle

121949383
66.3867.525.03-A001: RNCC: 3 | RNVC: 2
558540: RNCC: 5 | RNVC: 2
66-3867-525-03A001: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-702-5249
Angle Bracket

127025249
VG95211-ML-127025249: RNCC: 2 | RNVC: 2
5.51.7010.0200.11: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-2503
Resilient Mount

123072503
DIN95363-A25X10M6X8,5M6X12NR55ST: RNCC: 4 | RNVC: 1
811.000.025.010.6X12.6X8,5NR55ST: RNCC: 5 | RNVC: 2
2015040412: RNCC: 5 | RNVC: 2
500025-M6X8,5-M6X12.NR55.ST: RNCC: 5 | RNVC: 2
81100-25X10-M6X12-M6X8,5.NR55.ST: RNCC: 5 | RNVC: 2
472.670: RNCC: 5 | RNVC: 2
E1013-2405-2602: RNCC: 5 | RNVC: 2
VG95363-A25X10-M6X8,5M6X12NR55ST: RNCC: 5 | RNVC: 9

27 May 1986

5340-12-346-1551
Manual Control Handle

123461551
GN-212.5-21-M8-20-E: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-702-4218
Angle Bracket

127024218
VG95211-ML-127024218: RNCC: 2 | RNVC: 2
5.12.7205.1007.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-327-4590
Dust And Moisture Seal Protective Plug

123274590
11257917306: RNCC: 3 | RNVC: 2

23 Jan 1992

5340-12-333-3454
Handle Grip

123333454
81669225011: RNCC: 2 | RNVC: 2
81669225011: RNCC: 3 | RNVC: 2
81.66922.5011: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-12-168-6457
Dust And Moisture Seal Protective Cap

121686457
WW410884BU: RNCC: 3 | RNVC: 2
WW410884BU: RNCC: 5 | RNVC: 2
WW 410 884 BU: RNCC: 5 | RNVC: 2
WW410884BU: RNCC: 5 | RNVC: 2

25 Mar 1977

5340-12-333-4556
Mending Plate

123334556
81675400030: RNCC: 2 | RNVC: 2
81675400030: RNCC: 3 | RNVC: 2
81.67540.0030: RNCC: 5 | RNVC: 2

17 Dec 1993

5340-12-384-6946
Butt Hinge Leaf

123846946
917348: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-348-7341
Access Cover

123487341
42340919: RNCC: 3 | RNVC: 2
42340919: RNCC: 5 | RNVC: 2

11 Aug 1999

5340-12-320-8737
Plain Solid Disk

123208737
1304 307 088: RNCC: 3 | RNVC: 2
1304307088: RNCC: 5 | RNVC: 2

28 Feb 1990

5340-12-365-8949
Retaining Strap

123658949
T214M1004102: RNCC: 2 | RNVC: 2
T214M1004102: RNCC: 3 | RNVC: 2

16 Feb 2005

5340-12-175-1012
Pipe Bracket

121751012
4356157232: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-357-5286
Key Blank

123575286
0007605306: RNCC: 3 | RNVC: 2
9424620032: RNCC: 5 | RNVC: 9
A0007605306: RNCC: 5 | RNVC: 9

28 Jun 2002

5340-12-178-1877
Nonmetallic Bumper

121781877
3004CMV2012005: RNCC: 3 | RNVC: 2
3004CMV20122: RNCC: 5 | RNVC: 2

26 Mar 1979

5340-12-357-8428
Angle Bracket

123578428
T406M3001205: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-334-0126
Angle Bracket

123340126
4623150140: RNCC: 3 | RNVC: 2
7013-A1: RNCC: 5 | RNVC: 2
ZR23150140: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-12-311-3950
Clamping Catch

123113950
6020068: RNCC: 3 | RNVC: 2
7404571: RNCC: 5 | RNVC: 2

27 Aug 1987

5340-12-050-0800

5340-12-347-4437
Nonmetallic Bumper

123474437
436931: RNCC: 3 | RNVC: 9

11 Dec 1998

5340-12-317-6815
Instrument Mounting Clamp

123176815
PAN4258P28: RNCC: 3 | RNVC: 2

28 Apr 1989

5340-12-359-6577
Mounting Bracket

123596577
9455460882: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-12-310-2807
Mending Plate

123102807
1000104-602100.01: RNCC: 3 | RNVC: 2
1000104-602100.01: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-374-3099
Section Block Clamp

123743099
5307778: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-040-2040

5340-12-333-4256
Nonmetallic Bumper

123334256
0049-801057A00C: RNCC: 2 | RNVC: 2
0049-801057A00C: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-315-9591
Retaining Strap

123159591
3975460144: RNCC: 3 | RNVC: 2
397 546 01 44: RNCC: 5 | RNVC: 2

9 Dec 1988

5340-12-364-1957
Cushioning Pad

123641957
GSERD2010.06.05.02: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-354-8968
Retaining Strap

123548968
883SK8948: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-12-365-2574
Rim Lock

123652574
1049-U19: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-317-8383
Detent Plunger

123178383
7143201: RNCC: 3 | RNVC: 2

18 May 1989

5340-12-345-8581
Access Cover

123458581
00996010: RNCC: 3 | RNVC: 2

6 May 1998

5340-12-175-8014
Nonmetallic Bumper

121758014
CF 404 466 A: RNCC: 2 | RNVC: 2
CF 404 466 A: RNCC: 3 | RNVC: 2
CF 404 466 A: RNCC: 5 | RNVC: 2
CF 404 466 A: RNCC: 5 | RNVC: 2
CF404466A: RNCC: 5 | RNVC: 2
CF404466A: RNCC: 5 | RNVC: 2
CF404466A: RNCC: 5 | RNVC: 2

18 Oct 1978

5340-12-301-1963
Double Angle Bracket

123011963
1423-911.07(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-328-9193
Nonmetallic Bumper

123289193
272.305 693: RNCC: 2 | RNVC: 2
272.305.693: RNCC: 3 | RNVC: 2
272.305 693: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-176-2586
Webbing Strap

121762586
183885477: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-328-9196
Plug Button

123289196
2924260043: RNCC: 3 | RNVC: 2
LNT1623501: RNCC: 5 | RNVC: 2
1623501: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-359-8617
Nonmetallic Bumper

123598617
31660B: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-322-7050
Dust And Moisture Seal Protective Plug

123227050
2301767: RNCC: 3 | RNVC: 2
46632301767: RNCC: 5 | RNVC: 2

13 Sep 1990

5340-12-385-9783
Manual Control Lever

123859783
2481-395940.001.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-316-1156
Nonmetallic Bumper

123161156
5803471-201310.07: RNCC: 2 | RNVC: 2
65.7789.421.07-A001: RNCC: 3 | RNVC: 2

23 Dec 1988

5340-12-197-4508
Metal Runner

121974508
30819-166: RNCC: 3 | RNVC: 2
30819-166: RNCC: 5 | RNVC: 2

24 Oct 1983

5340-12-334-9367
Mending Plate

123349367
4900399-460700.02: RNCC: 2 | RNVC: 2
4900399-460700.02: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-12-198-0625
Double Angle Bracket

121980625
80002092: RNCC: 3 | RNVC: 2
80002092EZ5013-02: RNCC: 5 | RNVC: 2

15 Dec 1983

5340-12-345-7999
Dust And Moisture Seal Protective Cap-Plug Set

123457999
5580295: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-192-9402
Access Hole Frame

121929402
3512 117 2350 2: RNCC: 3 | RNVC: 2
3512 117 2350: RNCC: 5 | RNVC: 2
351211723502: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-378-1878
Elastic Strap

123781878
P20614: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-350-4100
Helical Compression Spring Retainer

123504100
20100-06: RNCC: 3 | RNVC: 2
E11200: RNCC: 5 | RNVC: 9

28 Mar 2000

5340-12-177-9908
Nut And Bolt Locking Plate

121779908
1121-50001.11: RNCC: 3 | RNVC: 2
1121-50001-11: RNCC: 5 | RNVC: 2

13 Mar 1979

5340-12-317-1438
Mounting Bracket

123171438
5802196-20140.01: RNCC: 2 | RNVC: 2
5802196-20140.01: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-12-332-8110
Double Angle Bracket

123328110
160-78214-03: RNCC: 3 | RNVC: 2
160-78214-03: RNCC: 5 | RNVC: 9

22 Sep 1993

5340-12-136-2506
Loop Clamp

121362506
81974015003: RNCC: 3 | RNVC: 2
90.16360-2673: RNCC: 5 | RNVC: 2
90163602673: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-165-3262
Nonmetallic Bumper

121653262
307.161-50130.05: RNCC: 3 | RNVC: 2
0307161-50130-05: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-702-2450
Mounting Plate

127022450
VG95211-ML-127022450: RNCC: 2 | RNVC: 2
30.7731.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-3774
Loop Clamp

123603774
RAN2-110: RNCC: 3 | RNVC: 2

15 May 2003

5340-12-336-9546
Case Corner

123369546
81614460004: RNCC: 3 | RNVC: 2
81.61446.0004: RNCC: 5 | RNVC: 2

29 Dec 1994

5340-12-379-7135
Mending Plate

123797135
06671670032: RNCC: 3 | RNVC: 2

25 Aug 2009

5340-12-360-0002
Angle Bracket

123600002
9413210040: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-024-3987

5340-12-070-1109

5340-12-342-6116
Access Cover

123426116
6 223 001 037: RNCC: 3 | RNVC: 2

6 Mar 1997

5340-12-378-4709
Spacing Threaded Standoff

123784709
5.16.401: RNCC: 3 | RNVC: 2

8 Apr 2009

5340-12-328-9360
Butt Hinge

123289360
CF 842 150 A: RNCC: 3 | RNVC: 2
CF842150A: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-322-0091
Angle Bracket

123220091
2782-363000.006.0: RNCC: 2 | RNVC: 2
2782-363000.006.0: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-342-3996
Nonmetallic Bumper

123423996
104-510000-906-0: RNCC: 2 | RNVC: 2
104-510000-906-0: RNCC: 3 | RNVC: 2

3 Feb 1997

5340-12-344-7410
Helical Compression Spring Retainer

123447410
5590980186: RNCC: 3 | RNVC: 2
559 098 01 86: RNCC: 5 | RNVC: 2

3 Dec 1997

5340-12-346-1086
Spring Tension Clip

123461086
4.0198: RNCC: 3 | RNVC: 2

15 Jun 1998

5340-12-350-7036
Loop Clamp

123507036
922.010.4: RNCC: 3 | RNVC: 2

8 May 2000

5340-12-359-8930
Dust And Moisture Seal Protective Cap

123598930
1594648: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-12-090-7477

5340-12-190-4612
Mending Plate

121904612
PH03.07: RNCC: 3 | RNVC: 2
PH0307: RNCC: 5 | RNVC: 2

30 Nov 1981

5340-12-172-8765
Helical Compression Spring Seat

121728765
9730022504: RNCC: 3 | RNVC: 2
1695654: RNCC: 5 | RNVC: 2
8462816: RNCC: 5 | RNVC: 2
0112671: RNCC: 5 | RNVC: 2
112671: RNCC: 5 | RNVC: 9

27 Feb 1978

5340-12-028-4850

5340-12-050-2959

5340-12-348-8545
Nonmetallic Bumper

123488545
2300387-660410.001: RNCC: 2 | RNVC: 2
2300387-660410.001: RNCC: 3 | RNVC: 2
2300387-660410.001: RNCC: 5 | RNVC: 9

27 Aug 1999

5340-12-347-9219
Befestigun Schelle

5340-12-336-9851
Webbing Strap

123369851
2500246-985200.00: RNCC: 2 | RNVC: 2
2768.01-5200.00: RNCC: 3 | RNVC: 2
2500246-985200.00: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-393-2029
Angle Bracket

123932029
06-22-025-35-01: RNCC: 3 | RNVC: 2
H03976: RNCC: 5 | RNVC: 2

16 Aug 2013

5340-12-321-0803
Electrical-Mechanical Equipment Post

123210803
5803576-200100.01: RNCC: 2 | RNVC: 2
5803606-201100.01: RNCC: 2 | RNVC: 2
VG95148B19XM8X106-ST: RNCC: 2 | RNVC: 2
VG95148B19XM8X106-ST: RNCC: 3 | RNVC: 2
5803576-200100.01: RNCC: 5 | RNVC: 2
5803576-200100.01: RNCC: 5 | RNVC: 9
5803606-201100.01: RNCC: 5 | RNVC: 9

26 Mar 1990

5340-12-199-6068
Angle Bracket

121996068
2300002-034811.000: RNCC: 2 | RNVC: 2
2300002-034811.000: RNCC: 3 | RNVC: 2
2300002-034811: RNCC: 5 | RNVC: 9
2300002-034811: RNCC: 5 | RNVC: 9
2300002-034811: RNCC: 5 | RNVC: 9

16 May 1984

5340-12-198-0968
Angle Bracket

121980968
1200096-1131E0001: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-702-2063
Blank Panel

127022063
VG95211-ML-127022063: RNCC: 2 | RNVC: 2
30.7211.441.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-5124
Angle Bracket

123075124
4605240010: RNCC: 3 | RNVC: 2
7005-70: RNCC: 5 | RNVC: 2

25 Jun 1986

5340-12-389-4320
Mounting Bracket

123894320
10199-183000.024.0: RNCC: 2 | RNVC: 2
10199-183000.024.0: RNCC: 3 | RNVC: 2

5 Jul 2012

5340-12-391-6312
Access Cover

123916312
B196804-K: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-308-9620
Nonmetallic Bumper

123089620
1281-64360.06: RNCC: 2 | RNVC: 2
160156: RNCC: 3 | RNVC: 2
1281-64360.06: RNCC: 5 | RNVC: 2

2 Dec 1986

5340-12-368-3528
Access Cover

123683528
13570-2513-02-06-0033: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-12-341-5744
Mending Plate

123415744
347-620-204A: RNCC: 3 | RNVC: 2

24 Sep 1996

5340-12-343-6899
Resilient Mount

123436899
DSM-225M: RNCC: 3 | RNVC: 2

15 Jul 1997

5340-12-329-9665
Angle Bracket

123299665
0852 8128.008: RNCC: 3 | RNVC: 2
8528128.008: RNCC: 5 | RNVC: 2

16 Oct 1992

5340-12-326-9639
Electronic Equipment Hardware Kit

123269639
65.7762.032.00-A001: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-12-357-9190
Mounting Bracket

123579190
2300415-250101.000: RNCC: 2 | RNVC: 2
2300415-250101.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-381-8231
Mounting Plate

123818231
4928178: RNCC: 3 | RNVC: 2
CV172046: RNCC: 5 | RNVC: 2

7 Apr 2010

5340-12-022-9426

5340-12-150-4049

5340-12-359-4803
Mounting Bracket

123594803
15141501: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-12-328-1294
Angle Bracket

123281294
0289 7566: RNCC: 3 | RNVC: 2

9 Apr 1992

5340-12-330-7387
Protection Bellows

123307387
6020940391: RNCC: 3 | RNVC: 2

2 Feb 1993

5340-12-376-0434
Catch Strike

123760434
ECL642.00.30/5: RNCC: 3 | RNVC: 2

6 Aug 2008

5340-12-333-4120
Manual Control Lever

123334120
136-768429-0: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-388-7629
Mounting Bracket

123887629
10199-183020.000.0: RNCC: 2 | RNVC: 2
10199-183020.000.0: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-319-7313
Electrical-Mechanical Equipment Post

123197313
5.05.304: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-12-353-1165
Section Block Clamp

123531165
JN0413CDG52: RNCC: 3 | RNVC: 2

30 Jan 2001

5340-12-702-3722
Rod End Connector

127023722
VG95211-ML-127023722: RNCC: 2 | RNVC: 2
5.12.5001.0280.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-187-7483
Clamping Catch

121877483
3.30.0120.0/3.30.0123.0: RNCC: 3 | RNVC: 2
3-30-120-0EN3-30-123-0: RNCC: 5 | RNVC: 2
3.30.120.0UND3.30.123.0: RNCC: 5 | RNVC: 2

4 May 1981

5340-12-188-6892
Nonmetallic Bumper

121886892
P-897008-001: RNCC: 3 | RNVC: 2
P897008-001: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-331-5622
Nonmetallic Bumper

123315622
8A0253147A: RNCC: 3 | RNVC: 9
191253147C: RNCC: 5 | RNVC: 2

19 May 1993

5340-12-319-7714
Nonmetallic Bumper

123197714
64 035 018A: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-12-325-4986
Dust And Moisture Seal Boot

123254986
3589060: RNCC: 3 | RNVC: 2
5324: RNCC: 5 | RNVC: 2
116 035: RNCC: 5 | RNVC: 2
3589060: RNCC: 5 | RNVC: 2
3589060: RNCC: 5 | RNVC: 9
5324: RNCC: 5 | RNVC: 9

11 Jun 1991

5340-12-358-8748
Retaining Strap

123588748
06860: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-153-8161
Plain Solid Disk

121538161
02752: RNCC: 3 | RNVC: 2
02752: RNCC: 3 | RNVC: 2
FWM02752: RNCC: 5 | RNVC: 2
02752: RNCC: 5 | RNVC: 9
FWM02752: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-346-9078
Mounting Bracket

123469078
2020.0400: RNCC: 3 | RNVC: 2

25 Sep 1998

5340-12-701-7061
Angle Bracket

127017061
VG95211-ML-127017061: RNCC: 2 | RNVC: 2
5.12.7240.2910.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-143-0072
Loop Clamp

121430072
DIN3016-1-E2-14-24X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-14-24X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.14-24/15: RNCC: 3 | RNVC: 2
RSGU14-24/15: RNCC: 5 | RNVC: 2
RSGU0-14-24-15: RNCC: 5 | RNVC: 2
4209104014: RNCC: 5 | RNVC: 2
RSGU14-24-15: RNCC: 5 | RNVC: 2
DIN3016-E2-14-24X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-384-0956
Manual Control Handle

123840956
2300515-187703.000.0: RNCC: 2 | RNVC: 2
2300515-187703.000.0: RNCC: 3 | RNVC: 2

20 Jan 2011

5340-12-309-0022
Resilient Mount

123090022
E1T 2569S01: RNCC: 3 | RNVC: 2
E1T 2569 S01: RNCC: 3 | RNVC: 2
E1T2569S01: RNCC: 5 | RNVC: 2

5 Dec 1986

5340-12-170-2478
Retaining Strap

121702478
81974010698: RNCC: 3 | RNVC: 2
23250-144617-002-0: RNCC: 5 | RNVC: 9
23250-144617.002.0: RNCC: 5 | RNVC: 9

5 Jul 1977

5340-12-324-4108
Mounting Bracket

123244108
GE8143G354: RNCC: 3 | RNVC: 2
GE8143G354: RNCC: 5 | RNVC: 9

13 Feb 1991

5340-12-362-9678
Anschlagecke

123629678
BD5.250.100.420: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-177-9000
Nonmetallic Bumper

121779000
2300002-186000.002: RNCC: 2 | RNVC: 2
2300002-186000.002: RNCC: 3 | RNVC: 2
2300002-186000.002: RNCC: 3 | RNVC: 2
2300002-186000.002: RNCC: 3 | RNVC: 2
2300002-186000-002: RNCC: 5 | RNVC: 9
2300002-186000.002: RNCC: 5 | RNVC: 9

7 Mar 1979

5340-12-363-1177
Webbing Strap

123631177
SE 1802-2-01212: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-390-0711
Access Door Hinge

123900711
2300559-186260.003.0: RNCC: 2 | RNVC: 2
2300559-186260.003.0: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-12-702-5983
Loop Clamp

127025983
VG95211-ML-127025983: RNCC: 2 | RNVC: 2
5148A-3: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3015
Mounting Bracket

127013015
VG95211-ML-127013015: RNCC: 2 | RNVC: 2
5.12.5101.5030.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-1448
Dust And Moisture Seal Protective Plug

123101448
2500179-194200.001.0: RNCC: 2 | RNVC: 2
2500179-194200.001.0: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-12-702-5339
Mounting Plate

127025339
VG95211-ML-127025339: RNCC: 2 | RNVC: 2
5.51.7107.0210.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6042
Mounting Bracket

127016042
VG95211-ML-127016042: RNCC: 2 | RNVC: 2
5.12.6602.1030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-328-3757
Double Angle Bracket

123283757
23176-181667.00.0: RNCC: 2 | RNVC: 2
23176-181667.00.0: RNCC: 3 | RNVC: 2

12 May 1992

5340-12-316-9750
Mounting Plate

123169750
1821350011: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-322-5920
Retaining Strap

123225920
062.00.001C: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-12-379-9433
Retaining Strap

123799433
1558324: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-196-3156
Dust And Moisture Seal Protective Plug

121963156
861.015.4: RNCC: 3 | RNVC: 2

27 Jun 1983

5340-12-143-4256
Loop Clamp

121434256
ZWSPGU8470.8-6/9: RNCC: 3 | RNVC: 2
1338470000: RNCC: 5 | RNVC: 2
ZWSPGU8470-8-6/9: RNCC: 5 | RNVC: 2
0009952044: RNCC: 5 | RNVC: 2
515M12706: RNCC: 5 | RNVC: 2
ZWSPGU470-8-6-9: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-0100
Helical Compression Spring Retainer

123540100
000N18032/1: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-393-3617
Angle Bracket

123933617
4100098-721100.001.0: RNCC: 2 | RNVC: 2
4100098-721100.001.0: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-302-8308
Metal Runner

123028308
4900123-1300.01: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-320-3108
Spacing Threaded Standoff

123203108
35 451 1301: RNCC: 3 | RNVC: 2
35451-130: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-320-2152
Angle Bracket

123202152
5057600-00372: RNCC: 3 | RNVC: 2

19 Dec 1989

5340-12-151-4918
Spring Tension Clip

121514918
23111-9438.02: RNCC: 2 | RNVC: 2
23111-9438-02: RNCC: 5 | RNVC: 2
23111-9438.02: RNCC: 5 | RNVC: 2
23111-9438-02: RNCC: 5 | RNVC: 9
23111-9438.02: RNCC: 5 | RNVC: 9
23111-9438-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-146-1531
Resilient Mount

121461531
GLOCKEN-ELEMENT-27994-M10.NR65ST: RNCC: 3 | RNVC: 2
27994BSTN65-HAMMERSCHLAGLACKGRAU: RNCC: 3 | RNVC: 2
500-01-98: RNCC: 5 | RNVC: 2
27994SM650: RNCC: 5 | RNVC: 9
27994BSTN6590: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-010-1572

5340-12-004-0504

5340-12-005-0088

5340-12-365-1608
Access Cover

123651608
536116-8025.000: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-322-8275
Access Door

123228275
6735131: RNCC: 2 | RNVC: 2
6735131: RNCC: 3 | RNVC: 2
6735131: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-359-5559
Manual Control Handle

123595559
CBD45310P07: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-12-145-8209
Butt Hinge Leaf

121458209
1201: RNCC: 3 | RNVC: 9
1201: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-141-5289
Blatt- Feder

5340-12-143-3527
Buegel- Klemme

5340-12-315-3050
Mounting Bracket

123153050
4220100240: RNCC: 3 | RNVC: 2
422 010 02 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-176-8056
Einfach Abg Halter

5340-12-309-7930
Access Cover

123097930
6148057: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-004-2063

5340-12-337-3819
Mounting Plate

123373819
454-250730.002: RNCC: 3 | RNVC: 9
9892735: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-12-382-3683
Dust And Moisture Seal Protective Cover

123823683
SBR 350-00002: RNCC: 3 | RNVC: 2

11 Jun 2010

5340-12-367-3545
Mechanical Stop

123673545
5161-370100A04B: RNCC: 2 | RNVC: 2
5161-370100A04B: RNCC: 3 | RNVC: 2

10 Aug 2005

5340-12-343-9686
Access Door

123439686
536519-0813.000: RNCC: 2 | RNVC: 2
536519-0813.000: RNCC: 3 | RNVC: 2

20 Aug 1997

5340-12-362-5380
Angle Bracket

123625380
ED41-1388-00001-105: RNCC: 2 | RNVC: 2
ED41-1388-00001-105: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-327-6679
Spacing Threaded Standoff

123276679
PAN5171-12-120: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-12-188-7317
Rod End Clevis

121887317
5801479-3025.01: RNCC: 2 | RNVC: 2
5801479-3025.01: RNCC: 3 | RNVC: 2
5801479-3025-01: RNCC: 5 | RNVC: 2
5801479-3025-01: RNCC: 5 | RNVC: 9
5801479-3025.01: RNCC: 5 | RNVC: 9

28 Jul 1981

5340-12-370-4616
Mounting Plate

123704616
87-401.00-00.00-81: RNCC: 3 | RNVC: 2

9 Nov 2006

5340-12-154-6764
Loop Clamp

121546764
DIN3016-1-D1-24X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-24X15-W5: RNCC: 3 | RNVC: 2
RSGU1.24/15-W5: RNCC: 3 | RNVC: 2
9410715024: RNCC: 5 | RNVC: 2
RSGU1.24/15-1.4571: RNCC: 5 | RNVC: 2
RSGU1100-24-15-1-4571: RNCC: 5 | RNVC: 2
RSGU1100.24/15-1.4571: RNCC: 5 | RNVC: 2
DIN3016-D1-24X15-W5: RNCC: 5 | RNVC: 9
VG95931-D24X15-W5: RNCC: 5 | RNVC: 9
VG95931D24X15W5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-125-3627
Expansion Plug

121253627
DIN443-36-ST-PHR: RNCC: 2 | RNVC: 2
01107626: RNCC: 5 | RNVC: 2
000443036000: RNCC: 5 | RNVC: 2
36DIN443PHR: RNCC: 5 | RNVC: 2
0312475: RNCC: 5 | RNVC: 2
36DIN443PHRE: RNCC: 5 | RNVC: 9
312475: RNCC: 5 | RNVC: 9
6.0215.21.5.0036: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-4748
Mounting Bracket

123164748
P-050272-004: RNCC: 3 | RNVC: 2
P050272-004: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-189-5446
Spring Tension Clip

121895446
P-896024-009: RNCC: 3 | RNVC: 2
P896024-009: RNCC: 5 | RNVC: 2

5 Oct 1981

5340-12-355-4285
Handle Grip

123554285
1762-130140.000.0: RNCC: 2 | RNVC: 2
1762-130140.000.0: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-328-4492
Resilient Mount

123284492
2-49-20-0071-01: RNCC: 3 | RNVC: 9
536K03704: RNCC: 5 | RNVC: 2
536K03704E1: RNCC: 5 | RNVC: 2

20 May 1992

5340-12-186-8049
Retaining Strap

121868049
SN78550-A4-ST-A3G-F: RNCC: 3 | RNVC: 2
1043064-VERZINKT: RNCC: 3 | RNVC: 2
A4SN78550-STVZK: RNCC: 5 | RNVC: 2
H78550-A40-S3: RNCC: 5 | RNVC: 2
H78550A40S3: RNCC: 5 | RNVC: 2
1043064VERZINKT: RNCC: 5 | RNVC: 2
1043064VERZINKTGELBCHR0MATIERT: RNCC: 5 | RNVC: 2

6 Feb 1981

5340-12-192-6138
Butt Hinge Leaf

121926138
F01-23 00 00.05.0: RNCC: 3 | RNVC: 2
F01-230000-05-0: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-196-0594
Bow Handle

121960594
81970010349: RNCC: 3 | RNVC: 2

24 May 1983

5340-12-351-6767
Mounting Bracket

123516767
2300387-640235.000: RNCC: 2 | RNVC: 2
9903987: RNCC: 3 | RNVC: 2
2300387-640235.000: RNCC: 5 | RNVC: 9
9903987: RNCC: 5 | RNVC: 9

15 Aug 2000

5340-12-348-0983
Angle Bracket

123480983
58R059-61321: RNCC: 2 | RNVC: 2
58R059-61321: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-12-339-3044
Access Cover

123393044
3963338: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-12-390-0477
Electronic Equipment Hardware Kit

123900477
105-982877: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-318-7783
Bow Handle

123187783
DL54: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-12-372-3475
Nonmetallic Bumper

123723475
1403231085: RNCC: 3 | RNVC: 2
1403230485 TEIL 1403231085: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-12-356-5007
Door Button

123565007
255-9853: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-12-365-1187
Spring Tension Clip

123651187
0009957614: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-310-5564
Resilient Mount

123105564
E1E 32S 63 AL: RNCC: 3 | RNVC: 2
VE32 HDS 63 AL: RNCC: 5 | RNVC: 2
VE32HDS63AL: RNCC: 5 | RNVC: 2

2 Jun 1987

5340-12-042-5680

5340-12-128-0044

5340-12-314-2911
Webbing Strap

123142911
4900274-208300.00: RNCC: 2 | RNVC: 2
4900274-208300.00: RNCC: 3 | RNVC: 2
000-D6-25X2,0X370-PE-RAL6031: RNCC: 6 | RNVC: 9

23 Jun 1988

5340-12-168-5682
Door Button

121685682
1000025-260500-04: RNCC: 3 | RNVC: 2
1000025-260500.04: RNCC: 3 | RNVC: 2
1000025-260500-04: RNCC: 5 | RNVC: 9
1000025-260500.04: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-349-8040
Access Cover

123498040
51 16 2 313 869: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-359-7955
Mounting Bracket

123597955
2500261-820120.000.0: RNCC: 2 | RNVC: 2
2500261-820120.000.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-328-3985
Lock-Release Lever

123283985
7300.7220.03.0: RNCC: 3 | RNVC: 2

14 May 1992

5340-12-328-8757
Mounting Bracket

123288757
2300232-824100.021.0: RNCC: 2 | RNVC: 2
2300232-824100.021.0: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-195-3933
Nut And Bolt Locking Plate

121953933
720689-001: RNCC: 3 | RNVC: 9

21 Feb 1983

5340-12-173-7414
Retaining Strap

121737414
D0154-15-28-02: RNCC: 3 | RNVC: 2
0154-15-28-02: RNCC: 5 | RNVC: 2
0154-15-28.02: RNCC: 5 | RNVC: 2

5 May 1978

5340-12-300-4667
Handwheel

123004667
DIN951-B160-AL: RNCC: 3 | RNVC: 2
B160DIN951-AL: RNCC: 5 | RNVC: 9
DIN951-B160-AL: RNCC: 5 | RNVC: 9

4 Aug 1984

5340-12-384-8584
Section Block Clamp

123848584
F1.1642-37-04-40.00-01: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-12-090-6711

5340-12-090-5076

5340-12-355-1101
Helical Compression Spring Retainer

123551101
4B54290: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-189-2052
Spring Tension Clip

121892052
23111-4629.01: RNCC: 3 | RNVC: 2
23111-4629.01: RNCC: 5 | RNVC: 9
23111-4629.01: RNCC: 5 | RNVC: 9
23111-4629-01: RNCC: 5 | RNVC: 9
23111-4629-01: RNCC: 5 | RNVC: 9

10 Sep 1981

5340-12-010-8507

5340-12-304-2513
Nonmetallic Bumper

123042513
1300392-210000.003: RNCC: 2 | RNVC: 2
49.004.00000.03E: RNCC: 3 | RNVC: 2

2 Jul 1985

5340-12-358-9450
Bow Handle

123589450
5180-1000-35: RNCC: 3 | RNVC: 2
85.97001.0001: RNCC: 5 | RNVC: 2
85970010001: RNCC: 5 | RNVC: 2

2 Dec 2002

5340-12-134-8186

5340-12-331-1849
Flush Lock

123311849
229.40.405: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-12-330-9362
Mounting Bracket

123309362
54.0024.765.01: RNCC: 2 | RNVC: 2
54.0024.765.01: RNCC: 3 | RNVC: 2

1 Mar 1993

5340-12-050-0762

5340-12-384-3666
Cushioning Pad

123843666
601901: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-12-350-2219
Retaining Bail

123502219
10063-126000: RNCC: 3 | RNVC: 2
10063-126000: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-337-0642
Mounting Plate

123370642
88624015001: RNCC: 3 | RNVC: 2
88.62401.5001: RNCC: 5 | RNVC: 2

17 Jan 1995

5340-12-177-4098
Angle Bracket

121774098
2300002-122570.000: RNCC: 2 | RNVC: 2
2300002-122570.000: RNCC: 3 | RNVC: 2
2300002-122570: RNCC: 5 | RNVC: 9
2300002-122570: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-333-1079
Resilient Mount

123331079
2K22-BAM-130-G1: RNCC: 3 | RNVC: 2
2K22-BAM-130-G1: RNCC: 5 | RNVC: 9

29 Oct 1993

5340-12-182-3033
Butt Hinge Leaf

121823033
B25X3X128HAN16515-3-3214-7: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-348-6289
Retaining Clamp Assembly

123486289
VG95211-ML-123486289: RNCC: 2 | RNVC: 2
A10-23-761-12-0: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-316-9917
Retaining Strap

123169917
3.3505-0500.1: RNCC: 3 | RNVC: 2
522213: RNCC: 5 | RNVC: 2

1 Mar 1989

5340-12-315-9887
Handwheel

123159887
VG85089-A-300X24-RG: RNCC: 2 | RNVC: 2

13 Dec 1988

5340-12-301-9520
Friction Catch

123019520
1403GR.3: RNCC: 3 | RNVC: 2
NO.1403-60X11MM: RNCC: 5 | RNVC: 2

21 Nov 1984

5340-12-348-4621
Mounting Bracket

123484621
027-101052-03-0: RNCC: 3 | RNVC: 2

24 Jun 1999

5340-12-335-3032
T Bracket

123353032
6700018-201300.04: RNCC: 2 | RNVC: 2
6700018-201300.04: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-12-339-0884
Mounting Bracket

123390884
250148-197500.00.0: RNCC: 3 | RNVC: 2

10 Oct 1995

5340-12-702-5827
Pawl Fastener

127025827
VG95211-ML-127025827: RNCC: 2 | RNVC: 2
5.51.9202.0031.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-328-9579
Webbing Strap

123289579
2300232-972200.001.0: RNCC: 2 | RNVC: 2
2300232-972200.001.0: RNCC: 3 | RNVC: 2
2300232-972200.001.0: RNCC: 5 | RNVC: 2
000-E1-25X1,2X700-PE-RAL6031: RNCC: 6 | RNVC: 9

3 Jul 1992

5340-12-323-9988
Nonmetallic Bumper

123239988
702-232100-903-0: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-702-4976
Mounting Bracket

127024976
VG95211-ML-127024976: RNCC: 2 | RNVC: 2
5.51.5811.0210.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-1262
Double Angle Bracket

123081262
P-233022-021: RNCC: 3 | RNVC: 2
P233022-021: RNCC: 5 | RNVC: 2

4 Sep 1986

5340-12-308-2496
Loop Clamp

123082496
DIN71555-68,5ZN: RNCC: 2 | RNVC: 2
DIN71555-68,5-VERZINKT: RNCC: 3 | RNVC: 2
68,5/71555VZ: RNCC: 3 | RNVC: 2
280.14.0457: RNCC: 5 | RNVC: 2
06.67042.0116: RNCC: 5 | RNVC: 2
DIN71555-68,5-VERZINKT: RNCC: 5 | RNVC: 2
5500800068: RNCC: 5 | RNVC: 2
06670420116: RNCC: 5 | RNVC: 2
071555068502: RNCC: 5 | RNVC: 2

18 Sep 1986

5340-12-702-5403
Mounting Bracket

127025403
VG95211-ML-127025403: RNCC: 2 | RNVC: 2
5.51.7204.1940.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-4662
Double Angle Bracket

123214662
7068-10050-001-2: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-362-6647
Mounting Plate

123626647
2500262-190000.011.0: RNCC: 2 | RNVC: 2
2500262-190000.011.0: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-150-0742
Hand Crank

121500742
130644-2000: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-122-2912
Retaining Clip

121222912
3033010007: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-1429
Nonmetallic Bumper

123581429
DAAB006: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-365-4485
Mounting Bracket

123654485
4638812014: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-353-8847
Cremone Bolt

123538847
209429: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-345-5850
Access Cover

123455850
62.7000.162.01-A001: RNCC: 2 | RNVC: 2
62.7000.162.01-A001: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-322-0996
Mounting Bracket

123220996
42208580: RNCC: 3 | RNVC: 2
42208580KZ50-6113: RNCC: 5 | RNVC: 2

24 Jul 1990

5340-12-388-6351
Section Block Clamp

123886351
5809953068: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-344-6234
Dust And Moisture Seal Protective Cap

123446234
3390522105: RNCC: 3 | RNVC: 2
0709373: RNCC: 5 | RNVC: 2
3 390 522 105: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-185-2899
Nonmetallic Bumper

121852899
2033B: RNCC: 3 | RNVC: 2
C 3695 642: RNCC: 5 | RNVC: 2
C3695642: RNCC: 5 | RNVC: 2
C 3695 642: RNCC: 5 | RNVC: 2
C3695642: RNCC: 5 | RNVC: 2

25 Sep 1980

5340-12-344-0501
Mounting Bracket

123440501
2996.72.51: RNCC: 3 | RNVC: 2
2996.7251: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-360-3022
Mounting Bracket

123603022
1864462507: RNCC: 3 | RNVC: 2
1864462507: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-324-0351
Access Cover

123240351
0653901: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-12-385-5065
Double Angle Bracket

123855065
5841750341: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-177-5713
Cremone Bolt

121775713
760315: RNCC: 3 | RNVC: 2

7 Feb 1979

5340-12-365-4920
Spring Tension Clip

123654920
0009950668: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-12-302-1576
Angle Bracket

123021576
3878910814: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-372-4856
Mortise Lock

123724856
10060040: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-177-9417
Helical Compression Spring Retainer

121779417
JJ51142: RNCC: 3 | RNVC: 2

9 Mar 1979

5340-12-302-2599
Nonmetallic Bumper

123022599
6209870039: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-188-6909
Double Angle Bracket

121886909
81523400263: RNCC: 3 | RNVC: 2
81.52340.0263: RNCC: 5 | RNVC: 9

23 Jul 1981

5340-12-182-2505
Double Angle Bracket

121822505
4115420540: RNCC: 3 | RNVC: 2

21 Jan 1980

5340-12-368-8955
Mounting Bracket

123688955
2300495-970177.000.0: RNCC: 3 | RNVC: 2

4 May 2006

5340-12-176-9571
Mounting Bracket

121769571
CF446669A: RNCC: 3 | RNVC: 2
CF 446 669 A: RNCC: 5 | RNVC: 2
CF446669A: RNCC: 5 | RNVC: 2
CF 446 669 A: RNCC: 5 | RNVC: 2
CF446669A: RNCC: 5 | RNVC: 2
CF 446 669 A: RNCC: 5 | RNVC: 2

3 Jan 1979

5340-12-357-7060
Clamping Catch

123577060
313655: RNCC: 3 | RNVC: 2
0006300590: RNCC: 5 | RNVC: 2
6.060.286.00: RNCC: 5 | RNVC: 9

15 Jul 2002

5340-12-337-2348
Access Cover

123372348
181705404: RNCC: 2 | RNVC: 2
181705404: RNCC: 3 | RNVC: 2
C 18 170 5404: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-364-3938
Snap Hook

123643938
0131390: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-360-0031
Mounting Bracket

123600031
9414306810: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-171-7579
Dust And Moisture Seal Protective Cap

121717579
BP13: RNCC: 3 | RNVC: 2

11 Nov 1977

5340-12-385-4666
Multiple Angle Bracket

123854666
SK976-012110.000.0: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-386-1938
Valve Actuator Guard

123861938
9999266-260000.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-330-1741
Friction Catch Stud Receptacle

123301741
1300555-500201-01-01: RNCC: 2 | RNVC: 2
VS5023T030: RNCC: 3 | RNVC: 2
536.00-14.01: RNCC: 5 | RNVC: 2
VS5023T030: RNCC: 5 | RNVC: 9
536.00-14.01: RNCC: 5 | RNVC: 9

11 Nov 1992

5340-12-320-7051
Mounting Bracket

123207051
C249-A29-C38: RNCC: 2 | RNVC: 2
C249-A29-C38: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-194-4911
Clamping Catch

121944911
VG95136B3-35X25-RAL6014: RNCC: 2 | RNVC: 2
602A647-RAL6014: RNCC: 3 | RNVC: 2
VG95136B3-35X25-RAL 6014: RNCC: 3 | RNVC: 2
602K0115-RAL6014: RNCC: 5 | RNVC: 2
555.2622: RNCC: 5 | RNVC: 2
5552622: RNCC: 5 | RNVC: 2
VG95136B3-35X25-RAL 6014: RNCC: 5 | RNVC: 9

9 Nov 1982

5340-12-302-1332
Angle Bracket

123021332
3711552-301: RNCC: 3 | RNVC: 2

4 Dec 1984

5340-12-301-2293
Loop Clamp

123012293
DIN3015-LA-K-2G-15-PP-W1: RNCC: 2 | RNVC: 2
SP215PPH-DP-AS: RNCC: 3 | RNVC: 2
HRGL2A15PP STMBL: RNCC: 3 | RNVC: 2
RAPG3-215: RNCC: 3 | RNVC: 2
H-SP215PP-DP-AS: RNCC: 5 | RNVC: 2
RAPG3-215: RNCC: 5 | RNVC: 2
DIN3015-LA2G-15PP-W1-K: RNCC: 5 | RNVC: 2
HRGL2A15PP ST BL: RNCC: 5 | RNVC: 2
RAPE3-215-GLATT: RNCC: 5 | RNVC: 2
HR2LA15.0/1GLATT: RNCC: 5 | RNVC: 2

28 Sep 1984

5340-12-184-3352
Catch Strike

121843352
5801357-1700.35: RNCC: 2 | RNVC: 2
5801357-1700.35: RNCC: 3 | RNVC: 2
5801357-1700-35: RNCC: 5 | RNVC: 9
5801357-1700-35: RNCC: 5 | RNVC: 9
5801357-1700-35: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-150-6321
Loop Clamp

121506321
G5TAN15802-0: RNCC: 3 | RNVC: 2
G5TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-188-5399
Double Angle Bracket

121885399
2300109-060000.006.0: RNCC: 3 | RNVC: 2
2300109-060000.006.0: RNCC: 3 | RNVC: 2
2300109-060000-006-0: RNCC: 5 | RNVC: 2
2300109-060000-006-0: RNCC: 5 | RNVC: 2
2300109-060000.006.0: RNCC: 5 | RNVC: 9
2300109-060000-006-0: RNCC: 5 | RNVC: 9

16 Jul 1981

5340-12-360-7726
Access Cover

123607726
2500305-183591.000.0: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-306-0666
Kunst Gleitschiene

123060666
5801984-981312.006.0: RNCC: 2 | RNVC: 2
5801984-981312.006.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-192-6630
Pad Eye

121926630
5902040390: RNCC: 3 | RNVC: 2

12 May 1982

5340-12-185-9318
Angle Bracket

121859318
540.3270: RNCC: 3 | RNVC: 2
5403270: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-310-8862
Helical Compression Spring Seat

123108862
03572000: RNCC: 3 | RNVC: 2

6 Jul 1987

5340-12-328-5461
Double Angle Bracket

123285461
52.3108.901.10: RNCC: 2 | RNVC: 2
52.3108.901.10: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-309-4080
Access Cover

123094080
WW 432 202: RNCC: 2 | RNVC: 2
WW 432 202: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-159-1432
Loop Clamp

121591432
AWENTW2269A227: RNCC: 3 | RNVC: 2
AWENTW2269A227: RNCC: 5 | RNVC: 2
AWENTW2269A227: RNCC: 5 | RNVC: 2
AWENTW2269A227: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-353-4421
Nonmetallic Bumper

123534421
2040250: RNCC: 3 | RNVC: 2

23 Mar 2001

5340-12-359-4943
Nonmetallic Bumper

123594943
599019-771994: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-143-8346

5340-12-197-9135
Angle Bracket

121979135
CF 478 191: RNCC: 3 | RNVC: 2
CF 478 191: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-164-4580

5340-12-367-8453
Double Angle Bracket

123678453
2300421-251400.005: RNCC: 2 | RNVC: 2
2300421-251400.005: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-12-094-4125

5340-12-145-5346
Klemme

121455346
3140700066: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-173-4225
Compression Cup

121734225
R3831: RNCC: 3 | RNVC: 2
3138620R1: RNCC: 5 | RNVC: 2
01270183: RNCC: 5 | RNVC: 2
1270183EY8751-28: RNCC: 5 | RNVC: 2

13 Apr 1978

5340-12-197-0482
Extension Drawer Slide Section

121970482
66.3851.220.04-A001: RNCC: 3 | RNVC: 2
161573: RNCC: 5 | RNVC: 2

14 Sep 1983

5340-12-368-9894
Multiple Angle Bracket

123689894
7803221200AA: RNCC: 3 | RNVC: 2
1030010-721170.000.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-355-6268
Spacing Threaded Standoff

123556268
1.220.449.9: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-12-355-4865
Spring Tension Clip

123554865
2019884178: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-309-4618
Nonmetallic Bumper

123094618
4900059-751930.003.0: RNCC: 2 | RNVC: 2
4900059-751930.003.0: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-12-329-5169
Dust And Moisture Seal Protective Plug

123295169
20728: RNCC: 3 | RNVC: 2
WFGST9: RNCC: 5 | RNVC: 2
ST9: RNCC: 5 | RNVC: 2
WFG ST 9: RNCC: 5 | RNVC: 2

26 Aug 1992

5340-12-148-2157
Spannschloszkoerper

Load More Results