What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 90 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 90 of 178

5340-12-388-9677
Mending Plate

123889677
122W163820.003.0: RNCC: 2 | RNVC: 2
122W163820.003.0: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-144-9344
Loop Clamp

121449344
1-4HAN22401: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-6123
Helical Compression Spring Seat

123226123
1617961: RNCC: 3 | RNVC: 2
R900147042: RNCC: 3 | RNVC: 2
0004021 4 147042: RNCC: 5 | RNVC: 2
1416522: RNCC: 5 | RNVC: 2
1416522: RNCC: 5 | RNVC: 2
147042: RNCC: 5 | RNVC: 9

6 Sep 1990

5340-12-305-5679
Mending Plate

123055679
4069125310: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-175-0991
Hinged Hasp

121750991
4046120132: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-010-8642

5340-12-701-5363
Angle Bracket

127015363
VG95211-ML-127015363: RNCC: 2 | RNVC: 2
5.12.6105.3390.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-4203
Snap Hook

123234203
3120707 V: RNCC: 3 | RNVC: 2
245S70X7VERZINKT: RNCC: 3 | RNVC: 2
245 S-70X7 VERZINKT: RNCC: 3 | RNVC: 9
245S70X7MM: RNCC: 5 | RNVC: 2
245S-70X7VERZINKT: RNCC: 5 | RNVC: 9

23 Nov 1990

5340-12-703-3078
Mending Plate

127033078
VG95211-ML-127033078: RNCC: 2 | RNVC: 2
5.12.2210.1608.01: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-701-6515
Angle Bracket

127016515
VG95211-ML-127016515: RNCC: 2 | RNVC: 2
5.12.7206.1740.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-2031
Angle Bracket

123012031
A-244829-763: RNCC: 3 | RNVC: 2
A244829-763: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-361-6760
Metal Grille

123616760
8320-0025: RNCC: 2 | RNVC: 2
8320-0025: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-342-5151
Mounting Bracket

123425151
2300421-041000.010: RNCC: 2 | RNVC: 2
9908386: RNCC: 3 | RNVC: 2
2300421-041000.010: RNCC: 5 | RNVC: 2
2300421-041000.010: RNCC: 5 | RNVC: 9
9908386: RNCC: 5 | RNVC: 9

21 Feb 1997

5340-12-164-3049
Retaining Strap

121643049
23290-031008: RNCC: 2 | RNVC: 2
23290-031008: RNCC: 3 | RNVC: 2
23290-031008: RNCC: 5 | RNVC: 9
23290-031008: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-4012
Lock-Release Lever

123084012
6900108-170: RNCC: 2 | RNVC: 2
774-049-50: RNCC: 3 | RNVC: 2

7 Oct 1986

5340-12-146-2850
Strap Fastener Loop

121462850
1013-81-31-66: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-2651
Lock-Release Lever

123022651
556-8204060.000: RNCC: 3 | RNVC: 2
4900075-4060-00: RNCC: 5 | RNVC: 9
4900075-4060.00: RNCC: 5 | RNVC: 9

13 Dec 1984

5340-12-335-8547
Nonmetallic Bumper

123358547
254-002: RNCC: 3 | RNVC: 2
15-020: RNCC: 5 | RNVC: 2
81.96410-0307: RNCC: 5 | RNVC: 2
81964100307: RNCC: 5 | RNVC: 2

23 Sep 1994

5340-12-325-0444
Padlock Set

123250444
R967/0001: RNCC: 2 | RNVC: 2
R967/0001: RNCC: 5 | RNVC: 2

24 Apr 1991

5340-12-355-9498
Mounting Bracket

123559498
J92220478-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-338-8021
Mounting Plate

123388021
6700017-202531.00: RNCC: 2 | RNVC: 2
6700017-202531.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-703-3428
Retaining Strap

127033428
VG95211-ML-127033428: RNCC: 2 | RNVC: 2
N1119-177: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-330-4616
Mounting Plate

123304616
30-79350-0174: RNCC: 3 | RNVC: 2
30.79350-0174: RNCC: 5 | RNVC: 2

17 Dec 1992

5340-12-315-1218
Angle Bracket

123151218
4220700566: RNCC: 3 | RNVC: 2
422 070 05 66: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-090-2239

5340-12-327-5804
Handle Grip

123275804
11227910600: RNCC: 3 | RNVC: 2

4 Feb 1992

5340-12-136-3994

5340-12-320-1529
Lock-Release Lever

123201529
1385401: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-12-191-9361
Grooved Clamp Coupling

121919361
HSS114: RNCC: 3 | RNVC: 2
3919713236676: RNCC: 5 | RNVC: 9

16 Mar 1982

5340-12-361-9977
Door Button

123619977
1000-U225: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-179-7236
Platte

121797236
5946110: RNCC: 3 | RNVC: 2

23 Jul 1979

5340-12-314-4323
Angle Bracket

123144323
6205230019: RNCC: 3 | RNVC: 2
620 523 00 19: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-339-1676
Dust And Moisture Seal Protective Cap

123391676
0116 4715: RNCC: 3 | RNVC: 2
1164715EE8928-70: RNCC: 5 | RNVC: 2
1164715: RNCC: 5 | RNVC: 2
C17X16H2870: RNCC: 5 | RNVC: 2
1164715: RNCC: 5 | RNVC: 2

20 Oct 1995

5340-12-359-1518
Mounting Bracket

123591518
ZG5200G434: RNCC: 3 | RNVC: 2
ZG5200G434ST: RNCC: 5 | RNVC: 9
ZG5200G434: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-197-0770
Access Hole Frame

121970770
3818370030: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-393-2151
Mounting Bracket

123932151
L135M2905215: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-12-196-0739
Mending Plate

121960739
409.038145: RNCC: 3 | RNVC: 2
409-038145: RNCC: 5 | RNVC: 2
409.038145: RNCC: 5 | RNVC: 9

25 May 1983

5340-12-166-9154
Angle Bracket

121669154
66-3524-122-02A001: RNCC: 3 | RNVC: 2

29 Oct 1976

5340-12-199-6870
Dust And Moisture Seal Protective Cap

121996870
1193-18.00: RNCC: 3 | RNVC: 2
1193-18-00: RNCC: 5 | RNVC: 2

23 May 1984

5340-12-343-5313
Support Hook

123435313
5092-355: RNCC: 3 | RNVC: 2
F300 0T 022 5028: RNCC: 6 | RNVC: 9

1 Jul 1997

5340-12-172-7814
Access Door

121727814
42011930: RNCC: 3 | RNVC: 2
42011929UE5042-36: RNCC: 5 | RNVC: 2
42011929: RNCC: 5 | RNVC: 2
42011930KZ5042-36: RNCC: 5 | RNVC: 2
2300032-210200: RNCC: 5 | RNVC: 9
2300032-210200: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-348-9112
Turnbuckle

123489112
245/9713-17-12-00: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-159-8030
Buckle

121598030
14021-14021-00: RNCC: 3 | RNVC: 2
893710: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-181-4627
Retaining Strap

121814627
4H050-4300: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-12-300-2818
Handwheel

123002818
3149180126: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-377-9200
Access Cover

123779200
313805: RNCC: 3 | RNVC: 2
0851-04-18-01/37: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-12-339-6854
Turnbuckle Body

123396854
480-1551-08-00-01: RNCC: 3 | RNVC: 2
480 1551 08 00 01: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-144-3333

5340-12-307-2454
Double Angle Bracket

123072454
RP981989: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-366-7790
Mounting Plate

123667790
6455240940: RNCC: 3 | RNVC: 2

7 Jun 2005

5340-12-378-0798
Door Button

123780798
1000-S568: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-701-1491
Mounting Plate

127011491
VG95211-ML-127011491: RNCC: 2 | RNVC: 2
5.12.0200.1550.14: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5890
Rod End Clevis

127025890
VG95211-ML-127025890: RNCC: 2 | RNVC: 2
5.51.9205.0431.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-2180
Double Angle Bracket

123082180
2300223-060000.05.0: RNCC: 2 | RNVC: 2
2300223-060000.05.0: RNCC: 3 | RNVC: 2

15 Sep 1986

5340-12-381-1378
Spring Tension Clip

123811378
6.375-550.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-321-3702
Mending Plate

123213702
3787260: RNCC: 3 | RNVC: 2
151-400000-901-0: RNCC: 5 | RNVC: 2
3787260EE3480-41: RNCC: 5 | RNVC: 2

10 May 1990

5340-12-346-2175
Bow Handle

123462175
VG95211-ML-123462175: RNCC: 2 | RNVC: 2
0.050.406.0: RNCC: 3 | RNVC: 2

30 Jun 1998

5340-12-701-7368
Retaining Strap

127017368
VG95211-ML-127017368: RNCC: 2 | RNVC: 2
5.12.7608.8330.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6311
Mounting Bracket

127016311
VG95211-ML-127016311: RNCC: 2 | RNVC: 2
5.12.7050.0080.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-141-9376
Resilient Mount

121419376
DIN95368-B1-1-NR45-ST: RNCC: 2 | RNVC: 2
57860250040: RNCC: 5 | RNVC: 2
786025WEICH: RNCC: 5 | RNVC: 2
64105009.NR45.ST: RNCC: 5 | RNVC: 2
K56WEICH: RNCC: 5 | RNVC: 2
KONUS-LAGER-786025.NR45.ST: RNCC: 5 | RNVC: 2
786025WEICH: RNCC: 5 | RNVC: 2
VG95368-B1-1-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-372-8336
Bow Handle

123728336
82614415010: RNCC: 3 | RNVC: 2
82.61441-5010: RNCC: 5 | RNVC: 2
82.61441.5010: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-12-300-0301
Mending Plate

123000301
2300109-990180.003.0: RNCC: 2 | RNVC: 2
2300109-990180.003.0: RNCC: 3 | RNVC: 2
2300109-990180-003-0: RNCC: 5 | RNVC: 2
2300109-990180-003-0: RNCC: 5 | RNVC: 9
2300109-990180.003.0: RNCC: 5 | RNVC: 9

27 Jun 1984

5340-12-701-4536
Loop Clamp

127014536
VG95211-ML-127014536: RNCC: 2 | RNVC: 2
5.12.5314.1000.57: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-394-3150
Webbing Strap

123943150
90618: RNCC: 3 | RNVC: 2
20200-036: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-12-324-0709
Access Cover

123240709
2896 695 M1: RNCC: 3 | RNVC: 2
374 948 102: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-12-316-5514
Mending Plate

123165514
5186315: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-12-379-5350
Access Cover

123795350
S533M5047211: RNCC: 3 | RNVC: 2
10307752: RNCC: 6 | RNVC: 9

5 Aug 2009

5340-12-341-5707
Dust And Moisture Seal Protective Cap

123415707
19.1-3001: RNCC: 3 | RNVC: 2
19.1-3001: RNCC: 5 | RNVC: 2

21 Sep 1996

5340-12-352-2847
Bridge Clamp

123522847
5090804: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-12-199-0030
Compression Cup

121990030
R5030: RNCC: 3 | RNVC: 2
01278505: RNCC: 5 | RNVC: 2
127-8505E8751-28: RNCC: 5 | RNVC: 9
8751-28-57-12: RNCC: 5 | RNVC: 9

20 Mar 1984

5340-12-199-1192
Catch Strike

121991192
2300088-510501.04: RNCC: 2 | RNVC: 2
2300088-510501.04: RNCC: 3 | RNVC: 2
2300088-510501-04: RNCC: 5 | RNVC: 9
2300088-510501.04: RNCC: 5 | RNVC: 9

28 Mar 1984

5340-12-338-2283
Pipe Hanger

123382283
70909-670: RNCC: 3 | RNVC: 2
KB-70909-670: RNCC: 5 | RNVC: 2

7 Jun 1995

5340-12-357-8453
Webbing Strap

123578453
79017/026-3500-1100: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-177-0835
Headless Straight Rod

121770835
3800042-00.03: RNCC: 2 | RNVC: 2
3800042-00.03: RNCC: 3 | RNVC: 2
3800042-00-03: RNCC: 5 | RNVC: 9
3800042-00.03: RNCC: 5 | RNVC: 9
3800042-00.03: RNCC: 5 | RNVC: 9

12 Jan 1979

5340-12-171-7864
Nonmetallic Bumper

121717864
35629586: RNCC: 3 | RNVC: 2
63.7214.424.02-A001: RNCC: 3 | RNVC: 2
584072: RNCC: 5 | RNVC: 2
63-7214-424-02A001: RNCC: 5 | RNVC: 9

14 Nov 1977

5340-12-199-3629
Angle Bracket

121993629
3105040140: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-323-9486
Electrical-Mechanical Equipment Post

123239486
0213 4906: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-393-5674
Multiple Angle Bracket

123935674
4374215094: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-393-7775
Nut And Bolt Locking Plate

123937775
M5757021220200: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-199-6471
Electrical-Mechanical Equipment Post

121996471
3422028740: RNCC: 3 | RNVC: 2
5801943-0200.004: RNCC: 5 | RNVC: 2

18 May 1984

5340-12-192-8673
Electronic Equipment Hardware Kit

121928673
15 299 021: RNCC: 3 | RNVC: 2
15-299-021: RNCC: 5 | RNVC: 2

1 Jun 1982

5340-12-362-9568
Angle Bracket

123629568
J28230062-403: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-12-305-1945
Electronic Equipment Hardware Kit

123051945
5801763-121000.000: RNCC: 2 | RNVC: 2
5801763-121000.000: RNCC: 3 | RNVC: 2
5801763-121000.000: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-388-2937
Elastic Strap

123882937
5768-200230A00C: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-12-306-4497
Lock-Release Lever

123064497
43711539-301: RNCC: 3 | RNVC: 2

28 Feb 1986

5340-12-147-9066
Rod End Clevis

121479066
100109-1600.07: RNCC: 2 | RNVC: 2
100109-1600-07: RNCC: 5 | RNVC: 2
100109-1600.07: RNCC: 5 | RNVC: 2
100109-1600-07: RNCC: 5 | RNVC: 9
122505139: RNCC: 8 | RNVC: 2

30 May 1969

5340-12-130-9880

5340-12-301-1389
Rubber Bumper

123011389
251829597: RNCC: 3 | RNVC: 9

22 Sep 1984

5340-12-307-9473
Mending Plate

123079473
8-9716.01: RNCC: 2 | RNVC: 2
8-9716.01: RNCC: 3 | RNVC: 2
9811757: RNCC: 5 | RNVC: 9
8-9716.01: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-339-8544
Mounting Bracket

123398544
1.8535-5: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-12-386-1327
Manual Control Lever

123861327
2481-391860.003.0: RNCC: 2 | RNVC: 2
2481-391860.003.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-341-8579
Clamping Catch

123418579
2300348-970465.000.0: RNCC: 2 | RNVC: 2
2300348-970465.000.0: RNCC: 3 | RNVC: 2
1570581: RNCC: 5 | RNVC: 2

6 Nov 1996

5340-12-355-7441
Mechanical Stop

123557441
P-876113-046: RNCC: 3 | RNVC: 2
P876113-046: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-701-3074
Mounting Plate

127013074
VG95211-ML-127013074: RNCC: 2 | RNVC: 2
5.12.5101.6480.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-334-8258
Rod End Clevis

123348258
14-058-402/2: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-701-2051
Loop Clamp

127012051
VG95211-ML-127012051: RNCC: 2 | RNVC: 2
5.12.0604.0050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-6959
Casement Fastener

123426959
U100-3113-101: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-12-702-4164
Mounting Bracket

127024164
VG95211-ML-127024164: RNCC: 2 | RNVC: 2
5.12.7001.1031.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-391-0337
Dust And Moisture Seal Protective Cover

123910337
NO PRIMARY REF 12-391-0337: RNCC: 3 | RNVC: 2
N252.25.1H/A: RNCC: 5 | RNVC: 2

16 Jan 2013

5340-12-172-9408
Mending Plate

121729408
81411402115: RNCC: 3 | RNVC: 2
23245-150602-003-0: RNCC: 5 | RNVC: 9
23245-150602.003.0: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-360-0377
Mounting Bracket

123600377
2500261-184000.021.0: RNCC: 2 | RNVC: 2
2500261-184000.021.0: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-701-6204
Mounting Plate

127016204
VG95211-ML-127016204: RNCC: 2 | RNVC: 2
5.12.7020.1020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-353-0184
Webbing Strap

123530184
VG95211-ML-123530184: RNCC: 2 | RNVC: 2
CBD45015G01: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-12-176-3802
Butt Hinge

121763802
631378: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-319-3850
Nonmetallic Bumper

123193850
5801411-6909.006: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-324-9674
Tee Hinge

123249674
539868: RNCC: 3 | RNVC: 2
0431.059.3: RNCC: 5 | RNVC: 2
A13.0237.00: RNCC: 5 | RNVC: 2
0539868: RNCC: 5 | RNVC: 2

16 Apr 1991

5340-12-341-7477
Loop Clamp

123417477
2500255-320900.02.0: RNCC: 2 | RNVC: 2
2500255-320900.02.0: RNCC: 3 | RNVC: 2

23 Oct 1996

5340-12-355-3555
Clamping Catch

123553555
606-M: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-12-317-0688
Mounting Bracket

123170688
4603100075: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-375-8612
Retaining Clip

123758612
0009913695: RNCC: 3 | RNVC: 2

14 Jul 2008

5340-12-356-1925
Butt Hinge Leaf

123561925
ED41-1310-00032-043: RNCC: 2 | RNVC: 2
ED41-1310-00032-043: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-12-338-1082
Retaining Strap

123381082
160-76154: RNCC: 3 | RNVC: 2
15160-76154: RNCC: 5 | RNVC: 2
160-76154: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-171-8438
Resilient Mount

121718438
DIN95363-B25X20-M6X13-NR45ST: RNCC: 2 | RNVC: 2
81110-25X20-M6X13.NR45.ST: RNCC: 5 | RNVC: 2
81962100252: RNCC: 5 | RNVC: 2
E7101-67-02-02: RNCC: 5 | RNVC: 2
81.96210-0252: RNCC: 5 | RNVC: 2
E7101-67-02.02: RNCC: 5 | RNVC: 2
VG95363-B25X20-M6X13-NR45ST: RNCC: 5 | RNVC: 9
E7101-67-02-02: RNCC: 5 | RNVC: 9
E7101-67-02.02: RNCC: 5 | RNVC: 9

22 Nov 1977

5340-12-367-7757
Loop Clamp

123677757
FX08-18-28-C6-W4: RNCC: 3 | RNVC: 2
FX08 18-28 C6-W4: RNCC: 5 | RNVC: 2

12 Oct 2005

5340-12-195-6963
Angle Bracket

121956963
5800043-1300-06: RNCC: 3 | RNVC: 2
5800043-1300.06: RNCC: 5 | RNVC: 2
5800043-1300-06: RNCC: 5 | RNVC: 9
5800043-1300.06: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-150-6292
Rod End Clevis

121506292
B8LN29607: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-370-6211
Clamping Catch

123706211
341-SS: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-12-358-7662
Mounting Bracket

123587662
9412608662: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-394-3131
Mounting Bracket

123943131
3662002540: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-12-350-4372
Section Block Clamp

123504372
JN0413CJG60: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-190-0305
Electrical-Mechanical Equipment Post

121900305
VG95148B4XM2X17-NRST: RNCC: 2 | RNVC: 2
VG95148B4XM2X17-NRST: RNCC: 3 | RNVC: 2
3410022006: RNCC: 3 | RNVC: 2
34100 22006: RNCC: 5 | RNVC: 9

4 Nov 1981

5340-12-177-8009
Mounting Bracket

121778009
VG95211-ML-121778009: RNCC: 2 | RNVC: 2
1121-31502W4.04: RNCC: 3 | RNVC: 2
1121-31502W4-04: RNCC: 5 | RNVC: 2

21 Feb 1979

5340-12-702-1726
Mounting Bracket

127021726
VG95211-ML-127021726: RNCC: 2 | RNVC: 2
30.7173.150: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-325-7594
Schlosz Schluessel

123257594
SCHLUESSEL 4010LI-BC0073: RNCC: 3 | RNVC: 2
BC0073: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-385-0815
Helical Compression Spring Retainer

123850815
F1.1692-50-10-00.00-03: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-12-319-0880
Headless Straight Rod

123190880
2654-332000.01: RNCC: 2 | RNVC: 2
2654-332000.01: RNCC: 3 | RNVC: 2
2654-332 000.01: RNCC: 5 | RNVC: 9
679-02000000.01: RNCC: 5 | RNVC: 9
679-02000000.01: RNCC: 5 | RNVC: 9

6 Sep 1989

5340-12-166-4999
Webbing Strap

121664999
2500045-4014.00: RNCC: 2 | RNVC: 2
2500045-4014.00: RNCC: 3 | RNVC: 2
2500045-4014.00: RNCC: 3 | RNVC: 2
2500045-4014.00: RNCC: 5 | RNVC: 9
2500045-4014-00: RNCC: 5 | RNVC: 9
2500045-4014-00: RNCC: 5 | RNVC: 9
2500045-4014-00: RNCC: 5 | RNVC: 9

16 Sep 1976

5340-12-344-8634
Mounting Bracket

123448634
5803514-204110.00: RNCC: 2 | RNVC: 2
55.0205.618.00: RNCC: 3 | RNVC: 2
5803514-204110.00: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-198-0950
Angle Bracket

121980950
5801411-331123: RNCC: 3 | RNVC: 2
5801411-331123: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-179-1083
Access Cover

121791083
30-79350-0196: RNCC: 3 | RNVC: 2

6 Jun 1979

5340-12-368-1479
Nonmetallic Bumper

123681479
9705000012: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-329-4952
Access Cover

123294952
43707390-601: RNCC: 3 | RNVC: 2

25 Aug 1992

5340-12-374-6997
Retaining Clip

123746997
0009881769: RNCC: 3 | RNVC: 2
7079077: RNCC: 5 | RNVC: 2

7 Mar 2008

5340-12-179-8388
Platte

121798388
CF432627: RNCC: 3 | RNVC: 2
CF 432 627: RNCC: 5 | RNVC: 2
CF432627: RNCC: 5 | RNVC: 2
CF 432 627: RNCC: 5 | RNVC: 2
CF432627: RNCC: 5 | RNVC: 2
CF 432 627: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-092-0897

5340-12-134-7497

5340-12-336-2808
Bow Handle

123362808
SW8001G055: RNCC: 3 | RNVC: 2
SW8001G055: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-352-6346
Mounting Bracket

123526346
1221 2385: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-341-5515
Nonmetallic Bumper

123415515
500.677: RNCC: 2 | RNVC: 2
500.677: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-12-050-2949

5340-12-170-2508
Section Block Clamp

121702508
PAN4272-8: RNCC: 3 | RNVC: 2
PAN4272-8: RNCC: 5 | RNVC: 2

5 Jul 1977

5340-12-701-9755
Dust And Moisture Seal Protective Cap

127019755
VG95211-ML-127019755: RNCC: 2 | RNVC: 2
1-4-2 OST1 10066-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-302-9266
Strap Fastener Loop

123029266
4-128926: RNCC: 3 | RNVC: 2
269472: RNCC: 5 | RNVC: 2

8 Feb 1985

5340-12-344-3994
Mounting Bracket

123443994
P-296883-197: RNCC: 3 | RNVC: 2
P296883-197: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-702-4126
Mounting Bracket

127024126
VG95211-ML-127024126: RNCC: 2 | RNVC: 2
5.12.6402.0382.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5241
Mounting Bracket

127025241
VG95211-ML-127025241: RNCC: 2 | RNVC: 2
5.51.7010.0152.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-151-4819
Handle Grip

121514819
AM386-70-4: RNCC: 3 | RNVC: 2
23111-99-0889: RNCC: 5 | RNVC: 2
7362955: RNCC: 5 | RNVC: 9
23111-99-0889: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-148-3221
Hand Crank

121483221
VG85086-B-175X14-GT: RNCC: 2 | RNVC: 2
VG85086-B-175X14-GT: RNCC: 3 | RNVC: 2
VG85086-B-175X14-GT: RNCC: 3 | RNVC: 2
VG85086-B-175X14-GT: RNCC: 3 | RNVC: 9
604145: RNCC: 5 | RNVC: 2
61820090: RNCC: 5 | RNVC: 2
B175X14VG85086GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-7030
Electrical-Mechanical Equipment Post

123027030
01.4.3880-1: RNCC: 3 | RNVC: 2
01-4-3880-1: RNCC: 5 | RNVC: 2

24 Jan 1985

5340-12-300-1237
Webbing Strap

123001237
01802-1-1300MM: RNCC: 3 | RNVC: 2
79036-1300: RNCC: 5 | RNVC: 2
01802-1-1300: RNCC: 5 | RNVC: 2
ST1000042-132200POS-NR4: RNCC: 5 | RNVC: 2
DIN60060-1-25X1300-C1: RNCC: 5 | RNVC: 9
01802-1: RNCC: 5 | RNVC: 9

5 Jul 1984

5340-12-345-2402
Mounting Bracket

123452402
4139 306 027: RNCC: 3 | RNVC: 2
4139306027: RNCC: 5 | RNVC: 9

16 Feb 1998

5340-12-313-4794
Helical Compression Spring Retainer

123134794
AS418-39-2-1: RNCC: 3 | RNVC: 2

7 Apr 1988

5340-12-328-1170
Mending Plate

123281170
54.0058.900.01: RNCC: 3 | RNVC: 2

8 Apr 1992

5340-12-322-2331
Mounting Bracket

123222331
272.332 907: RNCC: 2 | RNVC: 2
272.332.907: RNCC: 3 | RNVC: 2
272.332 907: RNCC: 5 | RNVC: 9

3 Aug 1990

5340-12-331-9097
Snap Hook

123319097
71098: RNCC: 3 | RNVC: 2

6 Jul 1993

5340-12-132-9174

5340-12-346-9080
Mounting Bracket

123469080
8664.1211: RNCC: 3 | RNVC: 2

25 Sep 1998

5340-12-027-7556

5340-12-352-6592
Sliding Door Track

123526592
5400049-725000.03: RNCC: 2 | RNVC: 2
5400049-725000.03: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-12-362-6157
Mounting Bracket

123626157
10020872: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-391-4593
Mounting Plate

123914593
I007170TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-391-4319
Mounting Bracket

123914319
I010722TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-315-8863
Loop Clamp

123158863
0009951765: RNCC: 3 | RNVC: 2
000 995 17 65: RNCC: 5 | RNVC: 2
000 995 17 65: RNCC: 5 | RNVC: 2
721 115 01 71: RNCC: 5 | RNVC: 2

6 Dec 1988

5340-12-185-2049
Bail Handle

121852049
C3782219: RNCC: 3 | RNVC: 2
C 3782 219: RNCC: 5 | RNVC: 2
C 3782 219: RNCC: 5 | RNVC: 2
C3782219: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-024-0704

5340-12-188-8159
Retaining Strap

121888159
450900-6614: RNCC: 3 | RNVC: 2

30 Jul 1981

5340-12-193-1791
Loop Clamp

121931791
300.101: RNCC: 3 | RNVC: 2
023932: RNCC: 5 | RNVC: 2
0029973390: RNCC: 5 | RNVC: 2

29 Jun 1982

5340-12-377-5162
Access Door Hinge

123775162
521010: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-12-350-5588
Dust And Moisture Seal Protective Cap

123505588
10063-821100.05: RNCC: 3 | RNVC: 2
10063-821100.05: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-357-8164
Angle Bracket

123578164
2300388-250500.010: RNCC: 2 | RNVC: 2
9947606: RNCC: 3 | RNVC: 2
2300388-250500.010: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-376-8378
Dust And Moisture Seal Protective Plug

123768378
5369970635: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-12-043-5746

5340-12-333-7573
Access Cover

123337573
15 0004 709: RNCC: 2 | RNVC: 2
15 0004 709: RNCC: 3 | RNVC: 2
150004709: RNCC: 5 | RNVC: 2

2 Feb 1994

5340-12-337-7025
Nonmetallic Bumper

123377025
1500.127.3: RNCC: 3 | RNVC: 2
15127-3: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-12-355-3671
Webbing Strap

123553671
1666401: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-12-384-0769
Mechanic Equipment Hardware Kit

123840769
9257421000: RNCC: 3 | RNVC: 2
9257421000: RNCC: 5 | RNVC: 2
19485: RNCC: 5 | RNVC: 2

19 Jan 2011

5340-12-370-9381
Mounting Bracket

123709381
61040: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-12-322-3531
Retaining Strap

123223531
9000 8287: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-371-9863
Section Block Clamp

123719863
01TC35591: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-12-375-1272
Mounting Plate

123751272
29966062: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-387-8331
Support Hook

123878331
7092970: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-328-9068
Nonmetallic Bumper

123289068
22001-11: RNCC: 3 | RNVC: 2
22001-11: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-165-4682
Clamping Catch

121654682
PAN5105-040142: RNCC: 3 | RNVC: 2

18 May 1976

5340-12-164-3889
Webbing Strap

121643889
490126-22104-00: RNCC: 3 | RNVC: 2
490126-22104-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-157-6821
Spring Tension Clip

121576821
5148-497: RNCC: 3 | RNVC: 2
5148-497: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-341-4032
Resilient Mount

123414032
1221/2141-01-10-02: RNCC: 3 | RNVC: 2
1221/2141-01-10-02: RNCC: 3 | RNVC: 2
1221/2141-01-10-02: RNCC: 5 | RNVC: 2
36/01/2141-01-10-02: RNCC: 5 | RNVC: 2

31 Aug 1996

5340-12-188-8038
Nonmetallic Bumper

121888038
5801479-3070.02: RNCC: 2 | RNVC: 2
DIN95364-D25X17-M6X13-NR55ST: RNCC: 2 | RNVC: 2
5801479-3070.02: RNCC: 5 | RNVC: 2
5801479-3070-02: RNCC: 5 | RNVC: 2
5801479-3070.02: RNCC: 5 | RNVC: 2
551001-M6X13.NR55.ST: RNCC: 5 | RNVC: 2
5801479-3070-02: RNCC: 5 | RNVC: 9
VG95364-D25X17-M6X13-NR55ST: RNCC: 5 | RNVC: 9
5801479-3070.02: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-303-8718
Nonmetallic Bumper

123038718
NO PRIMARY REF 12-303-8718: RNCC: 3 | RNVC: 2
6731 167640: RNCC: 5 | RNVC: 9

10 May 1985

5340-12-701-8553
Loop Clamp

127018553
VG95211-ML-127018553: RNCC: 2 | RNVC: 2
5891A-22: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-179-6297
Angle Bracket

121796297
4355440343: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-332-2545
Nonmetallic Bumper

123322545
2013010285: RNCC: 3 | RNVC: 2

26 Jul 1993

5340-12-163-9567
Plain Solid Disk

121639567
105-45041.16: RNCC: 3 | RNVC: 2
105-45041-16: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-361-3692
Angle Bracket

123613692
51058400088: RNCC: 3 | RNVC: 2
51.05840-0088: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-12-302-7919
Electrical-Mechanical Equipment Post

123027919
178.E70.80A-151/RO2: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-178-9254
Mounting Bracket

121789254
10500-01: RNCC: 3 | RNVC: 2
477181: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-188-9017
Mending Plate

121889017
BD8101T033: RNCC: 3 | RNVC: 2
BD8101T033: RNCC: 5 | RNVC: 9
BD8101T033: RNCC: 5 | RNVC: 9

6 Aug 1981

5340-12-359-3216
Dust And Moisture Seal Protective Cap

123593216
51257650987: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-354-4879
Butt Hinge

123544879
217-9302: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-12-353-9946
Loop Clamp

123539946
EN4113F16WH: RNCC: 2 | RNVC: 2

28 May 2001

5340-12-349-3933
Dust And Moisture Seal Protective Cap

123493933
7820421440: RNCC: 3 | RNVC: 2
78204 21440: RNCC: 5 | RNVC: 9

9 Nov 1999

5340-12-380-5776
Mounting Bracket

123805776
2192139-1: RNCC: 3 | RNVC: 2

10 Nov 2009

5340-12-183-2767
Quick Release Plunger

121832767
CF 417 387 -U: RNCC: 2 | RNVC: 2
CF 417 387 -U: RNCC: 3 | RNVC: 2
CF 417 387 -U: RNCC: 5 | RNVC: 2
CF4173870U: RNCC: 5 | RNVC: 2
CF 417 387 -U: RNCC: 5 | RNVC: 2
CF4173870U: RNCC: 5 | RNVC: 2
CF4173870U: RNCC: 5 | RNVC: 2

3 Apr 1980

5340-12-383-0558
Mechanical Stop

123830558
107W621000.001.0: RNCC: 2 | RNVC: 2
107W621000.001.0: RNCC: 3 | RNVC: 2
1918173: RNCC: 5 | RNVC: 2

8 Sep 2010

5340-12-379-4995
Retaining Bail

123794995
120D011400.012.0: RNCC: 2 | RNVC: 2
120D011400.012.0: RNCC: 3 | RNVC: 2
1319652: RNCC: 5 | RNVC: 2

30 Jul 2009

5340-12-311-0893
Pipe Bracket

123110893
Z1 D 186: RNCC: 3 | RNVC: 2

24 Jul 1987

5340-12-175-3308
Hinge Torsion Bar

121753308
WW402960D: RNCC: 3 | RNVC: 9
WW 402 960 D: RNCC: 5 | RNVC: 2
WW402960D: RNCC: 5 | RNVC: 2
WW 402 960 D: RNCC: 5 | RNVC: 9

11 Sep 1978

5340-12-300-0473
Retaining Strap

123000473
5055760: RNCC: 3 | RNVC: 2
50-5-5760: RNCC: 5 | RNVC: 2
50.5.5760: RNCC: 5 | RNVC: 2

27 Jun 1984

5340-12-314-8478
Mounting Bracket

123148478
P-146244-010: RNCC: 3 | RNVC: 2
P146244-010: RNCC: 5 | RNVC: 2

17 Aug 1988

5340-12-188-9582
Catch Strike

121889582
5801433-020000.17.0: RNCC: 3 | RNVC: 2
5801433-020000-17-0: RNCC: 5 | RNVC: 2
5801433-020000-17-0: RNCC: 5 | RNVC: 9
5801433-020000.17.0: RNCC: 5 | RNVC: 9

12 Aug 1981

5340-12-322-4884
Mounting Bracket

123224884
8100397-2300-01: RNCC: 2 | RNVC: 2
8100397-2300-01: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-343-9530
Mounting Bracket

123439530
2300392-020000.003: RNCC: 2 | RNVC: 2
9917959: RNCC: 3 | RNVC: 2
2300392-020000.003: RNCC: 5 | RNVC: 9
9917959: RNCC: 5 | RNVC: 9

19 Aug 1997

5340-12-095-0125

5340-12-180-6660
Loop Clamp

121806660
0287 6500: RNCC: 3 | RNVC: 2
2876500EE0704-79: RNCC: 5 | RNVC: 2
2876500: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-347-1019
Dust And Moisture Seal Protective Plug

123471019
25385778601C: RNCC: 3 | RNVC: 2
253857786: RNCC: 5 | RNVC: 9

27 Oct 1998

5340-12-126-5159

5340-12-349-8725
Multiple Angle Bracket

123498725
A1Z10283847: RNCC: 2 | RNVC: 2
A1Z10283847: RNCC: 3 | RNVC: 2
20361622: RNCC: 5 | RNVC: 2

19 Jan 2000

5340-12-025-0011

5340-12-360-7143
Access Cover

123607143
701 819 162: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-010-8485

5340-12-309-7928
Access Cover

123097928
6131612: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-168-5347
Tee Hinge

121685347
271829171A: RNCC: 3 | RNVC: 2

18 Mar 1977

5340-12-362-6981
Access Cover

123626981
222546: RNCC: 3 | RNVC: 2
222546: RNCC: 5 | RNVC: 9
MM9241G040: RNCC: 5 | RNVC: 9

19 Mar 2004

5340-12-183-2078
Nonmetallic Bumper

121832078
56-0049-424-02: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-183-6302
Access Cover

121836302
30-79510-0029: RNCC: 3 | RNVC: 2

6 May 1980

5340-12-356-1229
Friction Catch

123561229
2339-060040A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-375-7874
Mounting Plate

123757874
03-134959/00: RNCC: 3 | RNVC: 2
03-134959/00: RNCC: 5 | RNVC: 9

3 Jul 2008

5340-12-149-3712
Resilient Mount

121493712
A52X30M10X28-18NA70WNB611: RNCC: 3 | RNVC: 2
A52X30M10X28-18NA70: RNCC: 5 | RNVC: 2
6115817: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-0788
Butt Hinge Leaf

121890788
105-23397: RNCC: 3 | RNVC: 2

25 Aug 1981

5340-12-129-6907

5340-12-360-0449
Retaining Strap

123600449
9416250114: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-196-6278
Angle Bracket

121966278
0260600130: RNCC: 3 | RNVC: 2

25 Jul 1983

5340-12-379-0696
Dust And Moisture Seal Protective Cap

123790696
D0066004-003: RNCC: 3 | RNVC: 2

19 Jun 2009

5340-12-316-4008
Mounting Bracket

123164008
5801998-415000.00: RNCC: 2 | RNVC: 2
5801998-415000.00: RNCC: 3 | RNVC: 2
5801998-415000.00: RNCC: 5 | RNVC: 9

16 Jan 1989

5340-12-341-7184
Nonmetallic Bumper

123417184
0700-0000.016: RNCC: 3 | RNVC: 2

18 Oct 1996

5340-12-322-1171
Manual Control Lever

123221171
42445/6100-01: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-140-3669
Buckle

121403669
DIN5291-50-ST-VERNICKELT: RNCC: 2 | RNVC: 2
50DIN5291STVERNICKELT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-302-2954
Lock-Release Lever

123022954
2300002-181251.001: RNCC: 2 | RNVC: 2
2300002-181251.001: RNCC: 3 | RNVC: 2
2300002-181251-001: RNCC: 5 | RNVC: 9
2300002-181251.001: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-146-6695
Loop Clamp

121466695
REM0202-268: RNCC: 3 | RNVC: 2
REM0202-268: RNCC: 5 | RNVC: 2
REM0202-268: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-157-1797
Resilient Mount

121571797
1200000009: RNCC: 3 | RNVC: 2
352250015781: RNCC: 5 | RNVC: 2
VBE424-48: RNCC: 5 | RNVC: 2
HERMA,432TGM,OELSCHUTZ,H19: RNCC: 5 | RNVC: 2
H19AUSFTGM0ELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9
H19TGM-OELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9
HERMAHPTGM4320ELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-4111
Angle Bracket

121964111
5802079-1200: RNCC: 2 | RNVC: 2
5802079-1200: RNCC: 3 | RNVC: 2

5 Jul 1983

5340-12-163-3849
Dust And Moisture Seal Protective Cap-Plug

121633849
610U27: RNCC: 3 | RNVC: 2
GPN610U27: RNCC: 5 | RNVC: 2
U27: RNCC: 5 | RNVC: 2
9789400270: RNCC: 5 | RNVC: 2
GPN610,U27: RNCC: 5 | RNVC: 9
610002700: RNCC: 5 | RNVC: 9
U27GPN610: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-386-8390
Spring Tension Clip

123868390
00654012: RNCC: 3 | RNVC: 2
CV190393: RNCC: 5 | RNVC: 2
00654012: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-320-1032
Mending Plate

123201032
C249-A15-C117: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-328-9503
Resilient Mount

123289503
154-114X75X33-OE: RNCC: 3 | RNVC: 2
NOVEBRA TYP VT, OBERES ELEMENT: RNCC: 5 | RNVC: 2
VT,OBERES ELEMENT: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-315-2818
Multiple Angle Bracket

123152818
5802121-110000.02: RNCC: 2 | RNVC: 2
65.7789.461.02-A001: RNCC: 3 | RNVC: 2

8 Oct 1988

5340-12-324-6839
Mending Plate

123246839
52820-W8.04: RNCC: 3 | RNVC: 2
55339-01: RNCC: 5 | RNVC: 2

15 Mar 1991

5340-12-165-3208
Angle Bracket

121653208
307.161-10000.20: RNCC: 3 | RNVC: 2
0307161-10000-20: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-349-0958
Butt Hinge

123490958
J52822822-001: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-12-195-9563
Tee Hinge

121959563
591-19/RW24: RNCC: 3 | RNVC: 2
591-19-24: RNCC: 5 | RNVC: 2

5 May 1983

5340-12-190-7189
Double Angle Bracket

121907189
NO PRIMARY REF 12-190-7189: RNCC: 3 | RNVC: 2
7532 137781: RNCC: 5 | RNVC: 9
7532137781: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-330-3920
Retaining Strap

123303920
1016 024: RNCC: 3 | RNVC: 9
13 9000 479: RNCC: 5 | RNVC: 9
13 9000 479: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-12-330-4135
Recess Handle

123304135
151.35.207: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-12-364-2462
Nonmetallic Bumper

123642462
4375040012: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-352-2960
Loop Clamp

123522960
5555074: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-197-8475
Angle Bracket

121978475
107828: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-12-311-4381
Detent Plunger

123114381
1935210K34: RNCC: 3 | RNVC: 2

2 Sep 1987

5340-12-301-8529
Mending Plate

123018529
2000888: RNCC: 2 | RNVC: 2
400087: RNCC: 3 | RNVC: 2
2000888: RNCC: 5 | RNVC: 2
2000888: RNCC: 5 | RNVC: 9

14 Nov 1984

5340-12-328-5456
Mounting Bracket

123285456
52.3108.821.00: RNCC: 2 | RNVC: 2
52.3108.821.00: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-325-8902
Dust And Moisture Seal Boot

123258902
818020124(GR13): RNCC: 3 | RNVC: 2
4380429: RNCC: 5 | RNVC: 2
0043804292: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-326-4322
Loop Clamp

123264322
272.375.995: RNCC: 3 | RNVC: 2
272.375 995: RNCC: 5 | RNVC: 9

16 Sep 1991

5340-12-196-2538
Retaining Strap

121962538
03689600: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-196-0277
Dust And Moisture Seal Protective Plug

121960277
0009972186: RNCC: 3 | RNVC: 9
14171.5409: RNCC: 5 | RNVC: 2

17 May 1983

5340-12-345-9023
Plug Button

123459023
E24541: RNCC: 3 | RNVC: 2

14 May 1998

5340-12-381-1367
Loop Clamp

123811367
6.373-740.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-318-7459
Electrical-Mechanical Equipment Post

123187459
M511257-5: RNCC: 3 | RNVC: 9
M511257-5: RNCC: 5 | RNVC: 2

14 Aug 1989

5340-12-346-4296
Access Cover

123464296
2360-264170.01.0: RNCC: 3 | RNVC: 2

24 Jul 1998

5340-12-364-4441
Turnbuckle Body

123644441
2300397-970111.000.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-302-5511
Rigid Caster

123025511
03140439: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 14 0439: RNCC: 5 | RNVC: 2

11 Jan 1985

5340-12-390-6138
Spring Holder

123906138
10187-188320.008.0: RNCC: 3 | RNVC: 2

28 Nov 2012

5340-12-307-9354
Butt Hinge

123079354
4022.7201.2: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-701-3591
Mounting Bracket

127013591
5.12.5111.5720.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-159-3265
Retaining Strap

121593265
1392152-050011.047: RNCC: 2 | RNVC: 2
1392152-050011.047: RNCC: 3 | RNVC: 2
1392152-050011.047: RNCC: 5 | RNVC: 9
1392152-050011-047: RNCC: 5 | RNVC: 9
1392152-050011-047: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-8339
Double Angle Bracket

123088339
1281-50000.01: RNCC: 2 | RNVC: 2
160251: RNCC: 3 | RNVC: 2
1281-50000.01: RNCC: 5 | RNVC: 2

21 Nov 1986

5340-12-164-5431
Helical Compression Spring Seat

121645431
23290-182000.016: RNCC: 2 | RNVC: 2
23290-182000.016: RNCC: 3 | RNVC: 2
23290-182000-016: RNCC: 5 | RNVC: 9
23290-182000.016: RNCC: 5 | RNVC: 9
23290-182000.016: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-1215
Elastic Cord Assembly

123001215
7389: RNCC: 3 | RNVC: 2
3404/50CM: RNCC: 3 | RNVC: 2
JD5340-12-300-1215: RNCC: 5 | RNVC: 2
BEG5340-12-300-1215: RNCC: 5 | RNVC: 2
2512-44.11: RNCC: 5 | RNVC: 9
2512-44-11: RNCC: 5 | RNVC: 9

5 Jul 1984

5340-12-363-7047
Detent Plunger

123637047
0202-001-210: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-147-9029
Resilient Mount

121479029
0335 8696: RNCC: 3 | RNVC: 2
0144-05-16-10: RNCC: 5 | RNVC: 2
3358696KZ0144-05: RNCC: 5 | RNVC: 2
3358696: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-152-1117
Nonmetallic Bumper

121521117
845-7VS14-20: RNCC: 3 | RNVC: 2
790000-122942: RNCC: 5 | RNVC: 2
7VS14-20: RNCC: 5 | RNVC: 2
7VS14-20: RNCC: 5 | RNVC: 9
VS14-20: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-6101
Mounting Bracket

123596101
2500294-050-01: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-181-6132
Loop Clamp

121816132
TS7: RNCC: 3 | RNVC: 2
0803699: RNCC: 5 | RNVC: 2
DZ0803699: RNCC: 5 | RNVC: 2
5N.3821.021.05: RNCC: 5 | RNVC: 2
5N3821-021-05: RNCC: 5 | RNVC: 2
5N.3821.021.05: RNCC: 5 | RNVC: 2
250870000005: RNCC: 5 | RNVC: 2
5800583-096190.104: RNCC: 5 | RNVC: 2
5800583-096190-104: RNCC: 5 | RNVC: 2
TS7: RNCC: 5 | RNVC: 9

10 Dec 1979

5340-12-199-8928
Retaining Strap

121998928
ARC.68-S6-14: RNCC: 3 | RNVC: 2
ARC68-S6-14: RNCC: 5 | RNVC: 2

14 Jun 1984

5340-12-361-0344
Angle Bracket

123610344
J92220366-003: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-393-8464
Mounting Bracket

123938464
11.29225-0008: RNCC: 3 | RNVC: 2
11.29225-0008: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-300-4510
Plug Button

123004510
E3-2005301: RNCC: 3 | RNVC: 2
E3-2005301: RNCC: 5 | RNVC: 9
E3-2005301: RNCC: 5 | RNVC: 9

2 Aug 1984

5340-12-169-1410
Support Hook

121691410
160-24748-03: RNCC: 3 | RNVC: 2
160-24748-03: RNCC: 5 | RNVC: 9

18 Apr 1977

5340-12-315-9514
Dust And Moisture Seal Protective Cap

123159514
250/18: RNCC: 3 | RNVC: 2
GPN250-18: RNCC: 5 | RNVC: 2
HN49-01-GPN250/18: RNCC: 5 | RNVC: 2
GPN250/18: RNCC: 5 | RNVC: 2
250001800: RNCC: 5 | RNVC: 9

9 Dec 1988

5340-12-166-0876
Helical Compression Spring Seat

121660876
E143-023: RNCC: 3 | RNVC: 2

29 Jul 1976

5340-12-353-7735
Mending Plate

123537735
5060180092: RNCC: 3 | RNVC: 2
506 018 00 92: RNCC: 5 | RNVC: 2

10 May 2001

5340-12-344-3518
Retaining Strap

123443518
28201800445: RNCC: 3 | RNVC: 2
28201800445 E0: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-359-6032
Mounting Bracket

123596032
9432600362: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-360-4797
Access Cover

123604797
3515700500: RNCC: 3 | RNVC: 2
3515700500: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-388-2424
Loop Clamp

123882424
5917184036: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-12-025-5855

5340-12-305-5998
Retaining Strap

123055998
4069955020: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-388-6260
Elastic Strap

123886260
5000114783: RNCC: 3 | RNVC: 2
0114783: RNCC: 5 | RNVC: 2
CV168136: RNCC: 5 | RNVC: 2
0114783: RNCC: 5 | RNVC: 2

5 Apr 2012

5340-12-323-1133
Access Cover

123231133
509406: RNCC: 3 | RNVC: 2
509406: RNCC: 5 | RNVC: 2
509406: RNCC: 5 | RNVC: 9

24 Oct 1990

5340-12-310-7462
Pipe Bracket

123107462
255.149: RNCC: 3 | RNVC: 2
553139177: RNCC: 5 | RNVC: 2
026098: RNCC: 5 | RNVC: 2

26 Jun 1987

5340-12-326-3412
Lock-Release Lever

123263412
1000025-265110.02: RNCC: 2 | RNVC: 2
1000025-265110.02: RNCC: 3 | RNVC: 2
1000025-265110.02: RNCC: 5 | RNVC: 9

3 Sep 1991

5340-12-360-3247
Mounting Bracket

123603247
3513631407: RNCC: 3 | RNVC: 2
3513631407: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-179-8647
Buegel

121798647
350215: RNCC: 3 | RNVC: 9

3 Aug 1979

5340-12-181-1077
Nonmetallic Bumper

121811077
81960200139: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-331-9415
Plug Button

123319415
553 4272: RNCC: 3 | RNVC: 2
5534272: RNCC: 5 | RNVC: 2
553 4272: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-12-183-8113
Expansion Shield

121838113
48188179900041: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-042-1313

5340-12-341-5264
Mounting Bracket

123415264
6821453: RNCC: 3 | RNVC: 2
682.1453: RNCC: 5 | RNVC: 2
0682.1453.00: RNCC: 5 | RNVC: 2

13 Sep 1996

5340-12-135-6765

5340-12-332-6000
Swivel Caster

123326000
20-5120-772: RNCC: 3 | RNVC: 2

26 Aug 1993

5340-12-332-8131
Mending Plate

123328131
81974870630: RNCC: 2 | RNVC: 2
81974870630: RNCC: 3 | RNVC: 2
81.97487.0630: RNCC: 5 | RNVC: 2

22 Sep 1993

5340-12-328-1571
Access Cover

123281571
4617470687: RNCC: 3 | RNVC: 2
7214571108: RNCC: 5 | RNVC: 9

11 Apr 1992

5340-12-392-4166
Helical Compression Spring Seat

123924166
E224836: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-382-1731
Angle Bracket

123821731
5231550027: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-364-1462
Mortise Lock

123641462
501397: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-12-322-2375
Hand Crank

123222375
10 0021 027: RNCC: 2 | RNVC: 2
10 0021 027: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-326-0447
Manual Control Handle

123260447
108176: RNCC: 3 | RNVC: 9
510400754: RNCC: 5 | RNVC: 9

1 Aug 1991

5340-12-184-7798
Platte

121847798
5801505-31733-002: RNCC: 3 | RNVC: 2
5801505-31733.002: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-340-7614
Dust And Moisture Seal Protective Cap

123407614
CIRS 16 STF-103: RNCC: 3 | RNVC: 2

6 Jun 1996

5340-12-152-1105
Clamping Catch

121521105
6100008-63-09: RNCC: 2 | RNVC: 2
6100008-63-09: RNCC: 5 | RNVC: 2
6100008-63-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-7333
Rod End Clevis

123097333
9380041: RNCC: 3 | RNVC: 2
1139-430.02.00.049-001: RNCC: 5 | RNVC: 2

20 Feb 1987

5340-12-392-0796
Bridge Clamp

123920796
9KX960383-45: RNCC: 3 | RNVC: 2
0009933607: RNCC: 5 | RNVC: 2

2 May 2013

5340-12-353-3965
Manual Control Lever

123533965
521-140104.00.0: RNCC: 2 | RNVC: 2
521-140104.00.0: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-348-6648
Mounting Plate

123486648
245/9713-14-00-00: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-195-2657
Mending Plate

121952657
03432620: RNCC: 3 | RNVC: 2
343 2620: RNCC: 5 | RNVC: 2
3432620EE5022-71: RNCC: 5 | RNVC: 2
5167-71-19-26: RNCC: 5 | RNVC: 2
5167-71-19.26: RNCC: 5 | RNVC: 2

31 Jan 1983

5340-12-358-9309
Expansion Plug

123589309
DIN470-25-ST-A3P: RNCC: 2 | RNVC: 2

29 Nov 2002

5340-12-363-0898
Access Cover

123630898
160-771538: RNCC: 3 | RNVC: 2

4 May 2004

5340-12-365-9303
Mounting Bracket

123659303
9425532840: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-392-1999
Lock-Release Lever

123921999
109048-40280: RNCC: 3 | RNVC: 2

15 May 2013

5340-12-384-7573
Mounting Plate

123847573
WTG545131: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-12-371-8060
Electronic Equipment Hardware Kit

123718060
4060600: RNCC: 3 | RNVC: 2

18 May 2007

5340-12-198-7253
Barrel Bolt

121987253
27 0319 150: RNCC: 2 | RNVC: 2
9849681: RNCC: 3 | RNVC: 2
27 0319 150: RNCC: 5 | RNVC: 9
9849681: RNCC: 5 | RNVC: 9
270319150: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-187-2211
Nonmetallic Bumper

121872211
81960200113: RNCC: 3 | RNVC: 2
5000273054: RNCC: 5 | RNVC: 2
5000273054: RNCC: 5 | RNVC: 9

11 Mar 1981

5340-12-177-6155
Angle Bracket

121776155
2300002-151190.001: RNCC: 2 | RNVC: 2
2300002-151190.001: RNCC: 3 | RNVC: 2
2300002-151190-001: RNCC: 5 | RNVC: 9
2300002-151190.001: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-361-3332
Angle Bracket

123613332
51081400036: RNCC: 3 | RNVC: 2
51.08140-0036: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-388-9508
Access Cover

123889508
81416100169: RNCC: 3 | RNVC: 2
81.41610-0169: RNCC: 5 | RNVC: 2

9 May 2012

5340-12-179-1307
Nonmetallic Bumper

121791307
2300061-291100.009: RNCC: 2 | RNVC: 2
80700-2300061-291100.009: RNCC: 3 | RNVC: 2
2300061-291100.009: RNCC: 5 | RNVC: 2
2300061-291100-009: RNCC: 5 | RNVC: 9
2300061-291100.009: RNCC: 5 | RNVC: 9

8 Jun 1979

5340-12-153-5471
Nut And Bolt Locking Plate

121535471
100355-161000.08: RNCC: 2 | RNVC: 2
100355-161000-08: RNCC: 3 | RNVC: 2
100355-161000-08: RNCC: 5 | RNVC: 9
100355-161000-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-5338
Resilient Mount

121875338
1205121010: RNCC: 3 | RNVC: 2
15717: RNCC: 5 | RNVC: 2
WILMA,455/944,W34: RNCC: 5 | RNVC: 2
W34: RNCC: 5 | RNVC: 9
WILMA,INDEX455/944: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-302-5992
Access Cover

123025992
1-2650-15-2: RNCC: 2 | RNVC: 2
1-2650-15-2: RNCC: 3 | RNVC: 2
1-2650-15-2,L=2130: RNCC: 5 | RNVC: 9
1-2650-15-2,L=2130: RNCC: 5 | RNVC: 9

16 Jan 1985

5340-12-366-4971
Angle Bracket

123664971
2 0073-003: RNCC: 3 | RNVC: 2
2 0073-003: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-12-193-5623
Loop Clamp

121935623
DIN3016-2-G1-42X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-42X15-W1-2: RNCC: 3 | RNVC: 2
SP42/15SKZ: RNCC: 3 | RNVC: 2
102062042153: RNCC: 5 | RNVC: 2
102062042153: RNCC: 5 | RNVC: 2
1410000042: RNCC: 5 | RNVC: 2
SP42-15SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-42X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G42X15-W1: RNCC: 5 | RNVC: 9
VG95931G42X15-W1: RNCC: 5 | RNVC: 9

3 Aug 1982

5340-12-341-9093
Angle Bracket

123419093
03693600-GE: RNCC: 3 | RNVC: 2
03693600-GELB LACKIERT: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-12-301-2673
Rod End Clevis

123012673
25704-191354.00.0: RNCC: 2 | RNVC: 2
25704-191354.00.0: RNCC: 3 | RNVC: 2
25704-191354-00-0: RNCC: 5 | RNVC: 2
25704-191354-00-0: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-12-194-8275
Mending Plate

121948275
5801995-190600.02.0: RNCC: 3 | RNVC: 2
5801995-190600.02.0: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-12-136-2097
Resilient Mount

121362097
DIN95363-A50X30-NR60ST: RNCC: 2 | RNVC: 2
00702: RNCC: 5 | RNVC: 2
1.50.30.1.60NR/ST: RNCC: 5 | RNVC: 2
1.50.30.1.60NRST: RNCC: 5 | RNVC: 2
811.000.050.030.10X25.NR60.ST: RNCC: 5 | RNVC: 2
81100-50X30-M10X25.NR60.ST: RNCC: 5 | RNVC: 2
81.96210-0042: RNCC: 5 | RNVC: 2
81962100042: RNCC: 5 | RNVC: 2
VG95363-A50X30-NR60ST: RNCC: 5 | RNVC: 9
VG95363A50X30NR60ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-3720
Retaining Clip

123133720
1239884078: RNCC: 3 | RNVC: 2

26 Mar 1988

5340-12-382-8499
Loop Clamp

123828499
1816011089: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-12-187-5714
Retaining Strap

121875714
5809952968: RNCC: 3 | RNVC: 2

15 Apr 1981

5340-12-352-2268
Double Angle Bracket

123522268
5062033540: RNCC: 3 | RNVC: 2
506 203 35 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-169-3893
Resilient Mount

121693893
GE1450: RNCC: 3 | RNVC: 9

11 May 1977

5340-12-357-8640
Angle Bracket

123578640
2300042-255307.000: RNCC: 2 | RNVC: 2
2300042-255307.000: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-12-356-9436
Access Cover

123569436
8802000541: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-027-3446

5340-12-154-2088

5340-12-125-2030

5340-12-318-7860
Helical Compression Spring Seat

123187860
1000500005: RNCC: 3 | RNVC: 2
1 000 500 005: RNCC: 5 | RNVC: 2

16 Aug 1989

5340-12-340-6386
Access Door

123406386
1 575 010 100 K: RNCC: 3 | RNVC: 2
908592603: RNCC: 5 | RNVC: 2
C 90 859 2603: RNCC: 5 | RNVC: 2

15 May 1996

5340-12-176-7251
Detent Plunger

121767251
WW414461A: RNCC: 3 | RNVC: 9
WW 414 461 A: RNCC: 5 | RNVC: 2
WW414461A: RNCC: 5 | RNVC: 2
WW 414 461 A: RNCC: 5 | RNVC: 9

15 Dec 1978

5340-12-174-4315
Webbing Strap

121744315
KMPRP50-00: RNCC: 3 | RNVC: 9

29 Jun 1978

5340-12-300-1180
Mending Plate

123001180
C249-A34-C64: RNCC: 2 | RNVC: 2
C249-A34-C64: RNCC: 3 | RNVC: 2

5 Jul 1984

5340-12-326-6098
Butt Hinge

123266098
1056-U18: RNCC: 3 | RNVC: 2
218-9108: RNCC: 3 | RNVC: 2
160.14.0003 SCHWARZ: RNCC: 5 | RNVC: 2
C191-25/1056U18: RNCC: 5 | RNVC: 2

14 Oct 1991

5340-12-130-1860
Snap Hook

121301860
DIN5299-C160BK: RNCC: 2 | RNVC: 2
DIN5299-C160-ROH: RNCC: 3 | RNVC: 2
245-160X13 BLANK: RNCC: 3 | RNVC: 9
C160DIN5299BL: RNCC: 5 | RNVC: 2
C160DIN5299BLANK: RNCC: 5 | RNVC: 2
245-160X13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-3210
Angle Bracket

123173210
4900064-41212.008: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-334-2858
Expansion Plug

123342858
DIN443-10-ST-A3P: RNCC: 2 | RNVC: 2
DIN443-10-ST-FE/ZN8C: RNCC: 2 | RNVC: 2
DIN443-10-ST-ZN: RNCC: 5 | RNVC: 2
06150900203: RNCC: 5 | RNVC: 2
50325500: RNCC: 5 | RNVC: 2
10DIN443-VERZINKT: RNCC: 5 | RNVC: 2
10DIN443-ZN: RNCC: 5 | RNVC: 2
0630 361 077: RNCC: 5 | RNVC: 2
0630361077: RNCC: 5 | RNVC: 9

21 Apr 1994

5340-12-162-5383
Pipe Bracket

121625383
8469854: RNCC: 3 | RNVC: 2
8082-422: RNCC: 5 | RNVC: 2
8082422: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-2741
Angle Bracket

123012741
2300106-220500.01: RNCC: 2 | RNVC: 2
2300106-220500.01: RNCC: 3 | RNVC: 2
2300106-220500.01: RNCC: 5 | RNVC: 9
2300106-220500.01: RNCC: 5 | RNVC: 9

3 Oct 1984

5340-12-385-6839
Access Cover

123856839
F1.1692-50-20-00.00-12: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-703-3449
Mounting Bracket

127033449
VG95211-ML-127033449: RNCC: 2 | RNVC: 2
S32-6175-103G: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-341-9564
Hand Crank

123419564
5803708-113300.00: RNCC: 2 | RNVC: 2
7804191580: RNCC: 3 | RNVC: 2
78041 91580: RNCC: 5 | RNVC: 9

21 Nov 1996

5340-12-024-8460

5340-12-177-6560
Retaining Band

121776560
3818600814: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-12-094-6699

5340-12-360-2770
Spacing Threaded Standoff

123602770
0009128513: RNCC: 3 | RNVC: 2
0009128513: RNCC: 5 | RNVC: 2

30 Apr 2003

5340-12-043-9053

5340-12-366-0593
Retaining Clip

123660593
7H0827564: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-321-5032
Angle Bracket

123215032
060.20.0001: RNCC: 2 | RNVC: 2
060.20.0001: RNCC: 3 | RNVC: 2

25 May 1990

5340-12-356-1906
Dust And Moisture Seal Protective Plug

123561906
600B775RAL3000: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-321-8574
Bow Handle

123218574
42206074: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-302-2573
Loop Clamp

123022573
6204920640: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-350-4561
Section Block Clamp

123504561
JN0413CJE56: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-365-0642
Mounting Bracket

123650642
4614300058: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-353-0188
Access Cover

123530188
CBD45038P01: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-12-359-9703
Mounting Bracket

123599703
9412910340: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-387-8632
Rod End Clevis

123878632
7093334: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-316-0243
Mending Plate

123160243
01TL12709: RNCC: 3 | RNVC: 2

15 Dec 1988

5340-12-375-1322
Mounting Bracket

123751322
975240208: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-348-9842
Headless Straight Rod

123489842
4253000215: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-357-2939
Plain Solid Disk

123572939
A705501: RNCC: 3 | RNVC: 2

4 Jun 2002

5340-12-394-0754
Dust And Moisture Seal Protective Cap

123940754
CTP40490P002: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-356-3262
Track Stop

123563262
25081BAN: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-387-9137
Pipe Hanger

123879137
7093690: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-190-7339
Mending Plate

121907339
CF 455 458: RNCC: 3 | RNVC: 2
CF 455 458: RNCC: 5 | RNVC: 2
CF455458: RNCC: 5 | RNVC: 2
CF455458: RNCC: 5 | RNVC: 2

10 Dec 1981

5340-12-357-2938
Dust And Moisture Seal Protective Plug

123572938
A705502: RNCC: 3 | RNVC: 2

4 Jun 2002

5340-12-360-9394
Angle Bracket

123609394
PIK WVF60/60: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-368-3733
Multiple Angle Bracket

123683733
2300484-188150.001: RNCC: 2 | RNVC: 2
2300484-188150.001: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-12-335-3905
Dust And Moisture Seal Protective Cap

123353905
2642140: RNCC: 3 | RNVC: 2
E27-25A: RNCC: 5 | RNVC: 2

16 Aug 1994

5340-12-379-0812
Recess Handle

123790812
213-0703.03: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-310-9929
Double Angle Bracket

123109929
NGE 108-2580: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-349-8926
Retaining Strap

123498926
VG95211-ML-123498926: RNCC: 2 | RNVC: 2
T214M1004101: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-164-5235
Helical Compression Spring Retainer

121645235
23290-183023: RNCC: 2 | RNVC: 2
23290-183023: RNCC: 3 | RNVC: 2
23290-183023: RNCC: 5 | RNVC: 9
23290-183023: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-3280
Mending Plate

123133280
1900037-00-05: RNCC: 2 | RNVC: 2
352758: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-192-3152
Butt Hinge

121923152
42316264: RNCC: 3 | RNVC: 2
42316264KZ5611-18: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-177-0671
Platte

121770671
5800822-1201-008: RNCC: 3 | RNVC: 2
5800822-1201.008: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-316-0075
Mounting Bracket

123160075
54.0046.913.00: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-391-6663
Locking Shackle

123916663
2902310043: RNCC: 3 | RNVC: 2
8902310007: RNCC: 5 | RNVC: 9

26 Mar 2013

5340-12-197-9399
Spring Tension Clip

121979399
21570: RNCC: 3 | RNVC: 2
0005620073: RNCC: 5 | RNVC: 2

2 Dec 1983

5340-12-372-8395
Manual Control Handle

123728395
11221903400: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-12-372-9721
Mounting Bracket

123729721
206227: RNCC: 3 | RNVC: 2
206227: RNCC: 5 | RNVC: 2

12 Sep 2007

5340-12-189-4570
Handle Grip

121894570
0260017100: RNCC: 3 | RNVC: 2
S000260017100000: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-12-191-7418
Pad Eye

121917418
65.7725.010.04: RNCC: 3 | RNVC: 2
65-7725-010-04: RNCC: 5 | RNVC: 2

1 Mar 1982

5340-12-187-1055
Retaining Strap

121871055
53-1195-010-11: RNCC: 3 | RNVC: 2

5 Mar 1981

5340-12-303-0474
Metal Runner

123030474
2W111A008-1230: RNCC: 3 | RNVC: 2

22 Feb 1985

5340-12-385-8555
Spring Tension Clip

123858555
X130-20L: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-12-351-3621
Access Cover

123513621
72.012-113.060: RNCC: 3 | RNVC: 2

18 Jul 2000

5340-12-175-5413
Rod End Clevis

121755413
1809034101: RNCC: 3 | RNVC: 2
01272061: RNCC: 5 | RNVC: 2
1272061EY8751-52: RNCC: 5 | RNVC: 2

27 Sep 1978

5340-12-701-8561
Loop Clamp

127018561
VG95211-ML-127018561: RNCC: 2 | RNVC: 2
5893A-28: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-2143
Dust And Moisture Seal Protective Cap

123192143
9151830399: RNCC: 3 | RNVC: 2
467-407/5183-03-27-00: RNCC: 5 | RNVC: 2

14 Sep 1989

5340-12-195-6698
Clamping Catch

121956698
23111-4655.00: RNCC: 2 | RNVC: 2
23111-4655.00: RNCC: 3 | RNVC: 2
23111-4655-00: RNCC: 5 | RNVC: 9
23111-4655.00: RNCC: 5 | RNVC: 9
23111-4655-00: RNCC: 5 | RNVC: 9
23111-4655.00: RNCC: 5 | RNVC: 9

28 Mar 1983

5340-12-300-6755
Angle Bracket

123006755
4356197040: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-187-5490
Rod End Clevis

121875490
6.226.0.681.001.4: RNCC: 3 | RNVC: 2
6-226-0-681-001-4: RNCC: 5 | RNVC: 9
6.226.0.681.001.4: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-341-3178
Loop Clamp

123413178
DIN3016-2-G1-32X7-W5: RNCC: 2 | RNVC: 2
DIN3016-G1-32X7-W5: RNCC: 3 | RNVC: 2
SP32/7 ZY-W5: RNCC: 3 | RNVC: 2
SP32/7ZY-W5: RNCC: 5 | RNVC: 2
SP32/7ZY-W5: RNCC: 5 | RNVC: 2
DIN3016-G1-32X7-W5: RNCC: 5 | RNVC: 9
DIN3016-G1-32X7W5: RNCC: 5 | RNVC: 9

23 Aug 1996

5340-12-178-1273
Loop Clamp

121781273
DIN3016-2-G1-95X20-W1-2: RNCC: 2 | RNVC: 2
SP95/20SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-95X20-W1-2: RNCC: 3 | RNVC: 2
DIN3016-G1-95X20-W1-2: RNCC: 5 | RNVC: 2
1510000095: RNCC: 5 | RNVC: 2
SP95-20SKZ: RNCC: 5 | RNVC: 2
12151757: RNCC: 5 | RNVC: 2
6-0402-20-3-0095: RNCC: 5 | RNVC: 9
VG95931G95X20W1: RNCC: 5 | RNVC: 9
VG95931-G95X20-W1: RNCC: 5 | RNVC: 9

22 Mar 1979

5340-12-171-1867
Nonmetallic Bumper

121711867
82200-FT469-81.010/122.NR55: RNCC: 3 | RNVC: 2
FT469/81.010/122-FLCN5590: RNCC: 3 | RNVC: 2
81960200216: RNCC: 3 | RNVC: 2
FT469-81-010-122-55SH: RNCC: 5 | RNVC: 2
FT469-81010-122-55SH: RNCC: 5 | RNVC: 2
MOTORLAGER GR.1.2-55SHORE A: RNCC: 5 | RNVC: 2
81.96020-0216: RNCC: 5 | RNVC: 2
01261323: RNCC: 5 | RNVC: 2
1261323EZ8771-79: RNCC: 5 | RNVC: 2

16 Sep 1977

5340-12-379-3589
Angle Bracket

123793589
0069312: RNCC: 3 | RNVC: 2

15 Jul 2009

5340-12-359-0425
Dust And Moisture Seal Protective Plug

123590425
320GL22: RNCC: 3 | RNVC: 2
GPN320GL22: RNCC: 5 | RNVC: 2

12 Dec 2002

5340-12-197-8161
Handwheel

121978161
01F104BBAH59AGAL: RNCC: 3 | RNVC: 2
K2601F104BBAH59AGAL: RNCC: 5 | RNVC: 2
K2601F104BBAH59AGAL: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-315-8278
Mounting Bracket

123158278
54.0026.044.00: RNCC: 3 | RNVC: 2
54002604400: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-353-5071
Mending Plate

123535071
CBD30115P05: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-12-329-4840
Mounting Bracket

123294840
4618200714: RNCC: 3 | RNVC: 2

22 Aug 1992

5340-12-315-7230
Double Angle Bracket

123157230
3522030940: RNCC: 3 | RNVC: 2
352 203 09 40: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-374-1725
Angle Bracket

123741725
BSAR025: RNCC: 3 | RNVC: 2

25 Jan 2008

5340-12-359-9211
Angle Bracket

123599211
3206291: RNCC: 3 | RNVC: 2
1322440: RNCC: 5 | RNVC: 9

20 Mar 2003

5340-12-319-6956
Metal Runner

123196956
409033383: RNCC: 3 | RNVC: 2

26 Oct 1989

5340-12-199-3298
Retaining Strap

121993298
3529950022: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-153-6533

5340-12-126-5124

5340-12-376-3153
Nut And Bolt Locking Plate

123763153
832B06014/1: RNCC: 3 | RNVC: 2

11 Sep 2008

5340-12-338-2314
Lock-Release Lever

123382314
366.673: RNCC: 3 | RNVC: 2
366 673: RNCC: 5 | RNVC: 2
4.526.13: RNCC: 5 | RNVC: 9

8 Jun 1995

5340-12-386-1314
Angle Bracket

123861314
2481-390104.001.0: RNCC: 2 | RNVC: 2
2481-390104.001.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-338-4688
Dust And Moisture Seal Protective Cap

123384688
R51794: RNCC: 3 | RNVC: 2
R51794: RNCC: 5 | RNVC: 2
R 51 794: RNCC: 5 | RNVC: 2
R51794: RNCC: 5 | RNVC: 9
R 51 794: RNCC: 5 | RNVC: 9

14 Jul 1995

5340-12-308-6165
Compression Cup

123086165
0061.2073.7: RNCC: 3 | RNVC: 2

29 Oct 1986

5340-12-319-5770
Mounting Plate

123195770
4900059-751790.022.0: RNCC: 3 | RNVC: 2
1227979: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-319-2132
Lock-Release Lever

123192132
7213.998.9: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-320-6585
Dust And Moisture Seal Protective Cap

123206585
34211236794: RNCC: 3 | RNVC: 2
05.1502.20: RNCC: 5 | RNVC: 2
1236794: RNCC: 5 | RNVC: 2
34 21 1 236 794: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-159-6500
Retaining Band

121596500
43Z620-3: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-386-5040
Mounting Plate

123865040
120D180000.080.0: RNCC: 2 | RNVC: 2
120D180000.080.0: RNCC: 3 | RNVC: 2
1900772: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-332-0102
Resilient Mount

123320102
DIN95363-B15X10-M4X13-CR55ST: RNCC: 2 | RNVC: 2
FT NL 4000.005: RNCC: 5 | RNVC: 2
510010-M4X13.CR55.ST: RNCC: 5 | RNVC: 2
4000.005: RNCC: 5 | RNVC: 2
919390: RNCC: 5 | RNVC: 2
VG95363-B15X10-M4X13-CR55ST: RNCC: 5 | RNVC: 9

15 Jul 1993

5340-12-315-4783
Angle Bracket

123154783
5802005-201900.09: RNCC: 2 | RNVC: 2
65.7789.255.07-A001: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-12-331-2235
Resilient Mount

123312235
9GP 004 028-01: RNCC: 3 | RNVC: 2
9GP 004 028-017: RNCC: 5 | RNVC: 2
0366930: RNCC: 5 | RNVC: 2
004028-01: RNCC: 5 | RNVC: 2
004028-01: RNCC: 5 | RNVC: 2
8GP 004 028-017: RNCC: 5 | RNVC: 9
004 028-01: RNCC: 5 | RNVC: 9
9GP004028-01: RNCC: 5 | RNVC: 9

2 Apr 1993

5340-12-343-7145
Hinge Torsion Bar

123437145
P-231995-049: RNCC: 3 | RNVC: 2
P231995-049: RNCC: 5 | RNVC: 2

17 Jul 1997

5340-12-366-7622
Mounting Bracket

123667622
580-122934.000: RNCC: 2 | RNVC: 2
580-122934.000: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-338-2610
Catch Strike

123382610
V951L52-6AG: RNCC: 3 | RNVC: 2

13 Jun 1995

5340-12-155-7572
Flush Lock

121557572
66-3501-199-00: RNCC: 3 | RNVC: 2
5801172-16: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-351-4393
Seal Retaining Plate

123514393
VG95211-ML-123514393: RNCC: 2 | RNVC: 2
4653 310 006: RNCC: 3 | RNVC: 2
4653310006: RNCC: 5 | RNVC: 9

26 Jul 2000

5340-12-166-1291
Nonmetallic Bumper

121661291
NO PRIMARY REF 12-166-1291: RNCC: 3 | RNVC: 2
22-58450-00: RNCC: 5 | RNVC: 9
22/58450.00: RNCC: 5 | RNVC: 9
6731 558450: RNCC: 5 | RNVC: 9
6731558450: RNCC: 5 | RNVC: 9

31 Jul 1976

5340-12-308-0809
Mending Plate

123080809
E4-2038680: RNCC: 2 | RNVC: 2
E4-2038680: RNCC: 3 | RNVC: 2
E4-2038680: RNCC: 5 | RNVC: 9

29 Aug 1986

5340-12-380-7611
Mounting Bracket

123807611
531737: RNCC: 3 | RNVC: 2
03-07313-00-15-37: RNCC: 5 | RNVC: 2

26 Nov 2009

5340-12-388-7893
Quick Release Plunger

123887893
03092-02308: RNCC: 3 | RNVC: 2
NLM03092-02308: RNCC: 5 | RNVC: 9

24 Apr 2012

5340-12-319-6395
Mending Plate

123196395
F11.43386-0040: RNCC: 3 | RNVC: 2

19 Oct 1989

5340-12-348-8700
Mounting Bracket

123488700
4256801214: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-197-0430
Mending Plate

121970430
4357437011: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-12-041-9823

5340-12-172-2166
Door Hook

121722166
229G150MM: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-12-352-2360
Loop Clamp

123522360
5303832: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-12-346-7606
Detent Plunger

123467606
2205508: RNCC: 3 | RNVC: 2
EH2205.508: RNCC: 5 | RNVC: 9

8 Sep 1998

5340-12-190-4273
Bridge Clamp

121904273
3614522043: RNCC: 3 | RNVC: 2
36145 22043: RNCC: 5 | RNVC: 9

26 Nov 1981

5340-12-351-5133
Clamping Catch

123515133
4617700026: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-337-7888
Angle Bracket

123377888
201251: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-12-384-2823
Loop Clamp

123842823
040 480 018 018: RNCC: 3 | RNVC: 2
99707033509: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-12-367-1731
Nonmetallic Bumper

123671731
12.2104.0808: RNCC: 3 | RNVC: 2
0738437: RNCC: 5 | RNVC: 2

15 Jul 2005

5340-12-312-6802
Double Angle Bracket

123126802
1077852: RNCC: 2 | RNVC: 2
1077852: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-12-330-5384
Plug Button

123305384
251419669A: RNCC: 3 | RNVC: 2

6 Jan 1993

5340-12-175-7960
Mending Plate

121757960
81974850195: RNCC: 3 | RNVC: 2

18 Oct 1978

5340-12-092-0459

5340-12-177-1701
Resilient Mount

121771701
SMS59SCHWINGUNGSDAEMPFERA40X40: RNCC: 3 | RNVC: 9

17 Jan 1979

5340-12-345-7956
Dust And Moisture Seal Protective Plug

123457956
TA3014P010: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-348-6849
Runner

123486849
306313: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-346-1106
Metal Grille

123461106
52.3221.020.04: RNCC: 3 | RNVC: 2

15 Jun 1998

5340-12-302-7872
Lock-Release Lever

123027872
CF 493 110 -R: RNCC: 3 | RNVC: 2
CF 493 110 -R: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-389-3144
Dust And Moisture Seal Protective Cap

123893144
268291: RNCC: 3 | RNVC: 2
WI 0610 G 105: RNCC: 5 | RNVC: 2

20 Jun 2012

5340-12-180-6345
Dust And Moisture Seal Protective Cap

121806345
C107-A105-C30: RNCC: 2 | RNVC: 2
C107A105C30: RNCC: 3 | RNVC: 2
C107-A105-C30: RNCC: 5 | RNVC: 2
C107A105C30: RNCC: 5 | RNVC: 2
C107-A105-C30: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-126-8010
Turnbuckle Body

121268010
DIN1478-SPM6-ST-A3P: RNCC: 2 | RNVC: 2
SPMU-DIN1478-M6-A3P: RNCC: 3 | RNVC: 2
5000006V: RNCC: 5 | RNVC: 2
AM6DIN1478GALZN6: RNCC: 5 | RNVC: 2
AM6DIN1478VERZINKT: RNCC: 5 | RNVC: 2
SPM6DIN1478VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-139-3368
Halter

121393368
C22106-A6-C299: RNCC: 3 | RNVC: 2
C22106A6C229: RNCC: 5 | RNVC: 2
C22106A0006C229: RNCC: 5 | RNVC: 9
TFS70-26854: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-3667
Mounting Bracket

123113667
18070-01: RNCC: 3 | RNVC: 2

24 Aug 1987

5340-12-304-1775
Loop Clamp

123041775
WN 414 25-40-ST: RNCC: 3 | RNVC: 2
WN41425-40-ST: RNCC: 5 | RNVC: 9
WN 414 25-40-ST: RNCC: 5 | RNVC: 9

20 Jun 1985

5340-12-332-4196
Mechanical Stop

123324196
480-7346-06-11-00: RNCC: 3 | RNVC: 2
480/7346-06-11-00: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-183-2071
Nonmetallic Bumper

121832071
56-0049-404-06: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-302-8326
Friction Catch

123028326
4900123-1944.00: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-360-2991
Loop Clamp

123602991
0009550504: RNCC: 3 | RNVC: 2
0009550504: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-332-0550
Mounting Bracket

123320550
480-7383-02-00-00-26,27,44: RNCC: 3 | RNVC: 2
480/7383-02-00-00/26,27,44: RNCC: 5 | RNVC: 2

20 Jul 1993

5340-12-352-6313
Metal Grille

123526313
8320-0017: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-352-5871
Bow Handle

123525871
050-010114D: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-354-8235
Turnbuckle

123548235
9997010-015130.00: RNCC: 2 | RNVC: 2
9997010-015130.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-355-5362
Mechanical Stop

123555362
2125-131100.11B: RNCC: 2 | RNVC: 2
2125-131100.11B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-166-5710
Handle Grip

121665710
471-29: RNCC: 3 | RNVC: 2

24 Sep 1976

5340-12-300-0401
Sealing Plug Assembly

123000401
8372060057: RNCC: 3 | RNVC: 2
4799129: RNCC: 5 | RNVC: 2

27 Jun 1984

5340-12-312-1294
Loop Clamp

123121294
1074900141: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-12-389-9256
Door Closer

123899256
207147: RNCC: 3 | RNVC: 2
207147: RNCC: 5 | RNVC: 2

13 Sep 2012

5340-12-358-2418
Helical Compression Spring Seat

123582418
16.20.09: RNCC: 3 | RNVC: 2

1 Oct 2002

5340-12-043-2656

5340-12-199-1911
Clamping Catch

121991911
2922A-70MM: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-311-1002
Handle Grip

123111002
271: RNCC: 3 | RNVC: 2

27 Jul 1987

Load More Results