What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 88 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 88 of 178

5340-12-343-7548
Mending Plate

123437548
6674710541: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-12-136-8250

5340-12-312-3792
Angle Bracket

123123792
100000542: RNCC: 2 | RNVC: 2
100000542: RNCC: 3 | RNVC: 2

22 Dec 1987

5340-12-319-3812
Mounting Bracket

123193812
5802006-662000.01: RNCC: 2 | RNVC: 2
5802006-662000.01: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-325-1226
Angle Bracket

123251226
4139 319 094: RNCC: 3 | RNVC: 2
4139319094: RNCC: 5 | RNVC: 2
100CP3448: RNCC: 5 | RNVC: 2
4139 319 094: RNCC: 5 | RNVC: 2

6 May 1991

5340-12-365-0394
Mounting Bracket

123650394
4632850140: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-363-0900
Access Cover

123630900
160-772212: RNCC: 3 | RNVC: 2

4 May 2004

5340-12-143-0086
Loop Clamp

121430086
DIN3016-1-A2-15-15X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-15-15X15-W1-2: RNCC: 3 | RNVC: 2
RS1.2X15/15: RNCC: 3 | RNVC: 2
RS1100.2X15/15: RNCC: 5 | RNVC: 2
4217215015: RNCC: 5 | RNVC: 2
0142898: RNCC: 5 | RNVC: 9
142898: RNCC: 5 | RNVC: 9
DIN3016-A2-15-15X15-W1-2: RNCC: 5 | RNVC: 9
RS1100-2X15-15: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-380-2974
Manual Control Lever

123802974
18054-WDS-D 109-21: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-12-333-4233
Access Cover

123334233
702-241870-000-0: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-701-4367
Mounting Bracket

127014367
VG95211-ML-127014367: RNCC: 2 | RNVC: 2
5.12.5313.2021.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-8424
Cushioning Pad

123658424
M-51-036-01.0: RNCC: 3 | RNVC: 2

11 Feb 2005

5340-12-311-2950
Access Cover

123112950
987-111500.01.0: RNCC: 3 | RNVC: 2
987-111500.01.0: RNCC: 5 | RNVC: 9

13 Aug 1987

5340-12-364-3931
Angle Bracket

123643931
5981-181900.002.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-163-3164
Loop Clamp

121633164
DIN3016-1-A1-27,5X12-W1-2: RNCC: 2 | RNVC: 2
RS1.27,5/12: RNCC: 3 | RNVC: 2
DIN3016-A1-27,5X12-W1-2: RNCC: 3 | RNVC: 2
RS1100-27-5-12: RNCC: 5 | RNVC: 2
RS1100.27,5/12: RNCC: 5 | RNVC: 2
VG95931-A27,5X12-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-27,5X12-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5706
Mounting Bracket

127025706
VG95211-ML-127025706: RNCC: 2 | RNVC: 2
5.51.7701.2410.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-5065
Retaining Bail

127015065
VG95211-ML-127015065: RNCC: 2 | RNVC: 2
5.12.5850.8004.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-7032
Mounting Bracket

123497032
2500238-050314.005.0: RNCC: 2 | RNVC: 2
2500238-050314.005.0: RNCC: 3 | RNVC: 2

27 Dec 1999

5340-12-321-3789
Loop Clamp

123213789
1212 6626: RNCC: 3 | RNVC: 2
31.1776-05.4: RNCC: 5 | RNVC: 2

11 May 1990

5340-12-319-2588
Mounting Bracket

123192588
S1309LIG22: RNCC: 3 | RNVC: 2
S1309: RNCC: 5 | RNVC: 9

15 Sep 1989

5340-12-361-3361
Access Cover

123613361
51981120235: RNCC: 3 | RNVC: 2
51.98112-0235: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-389-1250
Webbing Strap

123891250
5768-200031A01K: RNCC: 3 | RNVC: 2

29 May 2012

5340-12-328-0675
Angle Bracket

123280675
2805100925: RNCC: 3 | RNVC: 2
805-10-66-01-01: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-12-161-1712
Turnbuckle Body

121611712
160-741009-02: RNCC: 3 | RNVC: 2
160-741009-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-3094
Double Angle Bracket

123333094
NO PRIMARY REF 12-333-3094: RNCC: 3 | RNVC: 2
21-4140: RNCC: 5 | RNVC: 9

23 Nov 1993

5340-12-317-3433
Detent Plunger

123173433
431271259531: RNCC: 3 | RNVC: 2
4900226-113000.02: RNCC: 5 | RNVC: 2
4900226-113000.02: RNCC: 5 | RNVC: 9

30 Mar 1989

5340-12-368-2593
Dust And Moisture Seal Protective Cover

123682593
F1042-1SKA: RNCC: 3 | RNVC: 2

18 Jan 2006

5340-12-326-9901
Folding Stay

123269901
10.02 20 01: RNCC: 3 | RNVC: 2
10.0220010: RNCC: 5 | RNVC: 2
GI-1305-1324: RNCC: 5 | RNVC: 9
GI-1305-1324: RNCC: 5 | RNVC: 9

18 Nov 1991

5340-12-185-6360
Loop Clamp

121856360
0287 9321: RNCC: 3 | RNVC: 2
2879321: RNCC: 5 | RNVC: 2
2879321EE0704-79: RNCC: 5 | RNVC: 2

21 Oct 1980

5340-12-358-0732
Mounting Plate

123580732
2300042-255400.012: RNCC: 2 | RNVC: 2
2300042-255400.012: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-358-4248
Mending Plate

123584248
4000A-341270.000.0: RNCC: 2 | RNVC: 2
4000A-341270.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-334-2310
Webbing Strap

123342310
79017/026-0800-0500: RNCC: 3 | RNVC: 2
79017/026-800-500: RNCC: 5 | RNVC: 2
DIN60060-2-25X500X300-C4/D2: RNCC: 5 | RNVC: 9

18 Apr 1994

5340-12-389-1282
Handle Ferrule

123891282
9999260-180063.001.0: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-305-0585
Double Angle Bracket

123050585
A-296712-455: RNCC: 3 | RNVC: 2
A296712-455: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-166-0434
Dust And Moisture Seal Protective Cap

121660434
100429-41020-14-0: RNCC: 2 | RNVC: 2
100429-41020-14-0: RNCC: 5 | RNVC: 2

29 Jul 1976

5340-12-306-5176
Pawl

123065176
1865-131100.07.0: RNCC: 3 | RNVC: 9

6 Mar 1986

5340-12-393-8428
Rod End Clevis

123938428
GN751-5-20-M5-B: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-701-2273
Mounting Bracket

127012273
VG95211-ML-127012273: RNCC: 2 | RNVC: 2
5.12.2010.5083.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-157-7341
Retaining Strap

121577341
VG95933DR-12-W1-BK: RNCC: 2 | RNVC: 2
2/1G12MMN325: RNCC: 3 | RNVC: 2
2-1G12MMN325: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-384-6944
Loop Clamp

123846944
10102421: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-387-8631
Section Block Clamp

123878631
7098375: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-373-9376
Extension Drawer Slide

123739376
3036.868: RNCC: 3 | RNVC: 2

20 Dec 2007

5340-12-304-7857
Mending Plate

123047857
0224 3240: RNCC: 3 | RNVC: 2
02243240EE0148-29: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-126-0857

5340-12-362-8345
Mounting Plate

123628345
9240024000: RNCC: 3 | RNVC: 2
924002 4000: RNCC: 5 | RNVC: 2

6 Apr 2004

5340-12-347-4871
Mounting Bracket

123474871
5220.230.231.000: RNCC: 3 | RNVC: 2
5220.230.231.000: RNCC: 5 | RNVC: 2

16 Dec 1998

5340-12-357-7101
Manual Control Handle

123577101
0019192860: RNCC: 3 | RNVC: 2
928462-03: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-362-8341
Mounting Bracket

123628341
2323951000: RNCC: 3 | RNVC: 2
232395 1000: RNCC: 5 | RNVC: 2

6 Apr 2004

5340-12-369-3240
Angle Bracket

123693240
D0065927-002: RNCC: 3 | RNVC: 2
D0065927-001: RNCC: 5 | RNVC: 2

21 Jun 2006

5340-12-163-9380
Door Button

121639380
NO PRIMARY REF 12-163-9380: RNCC: 3 | RNVC: 2
5790 124023: RNCC: 5 | RNVC: 9
5790124023: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-9886
Mending Plate

123289886
DIN3015-Z-DP-2-W1: RNCC: 2 | RNVC: 2
DP-B2: RNCC: 3 | RNVC: 2
GD-2D: RNCC: 3 | RNVC: 2
DP-B2: RNCC: 5 | RNVC: 2
18351 B: RNCC: 5 | RNVC: 2
0874960: RNCC: 5 | RNVC: 2
GD-2D: RNCC: 5 | RNVC: 2
18351: RNCC: 5 | RNVC: 2

7 Jul 1992

5340-12-183-2075
Nonmetallic Bumper

121832075
56-0049-410-04: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-190-6830
Pad Eye

121906830
NO PRIMARY REF 12-190-6830: RNCC: 3 | RNVC: 2
5710 135489: RNCC: 5 | RNVC: 9
5710135489: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-356-2482
Detent Plunger

123562482
11.20000-0555POS035: RNCC: 3 | RNVC: 2
F11.20041-0074: RNCC: 5 | RNVC: 2

5 Feb 2002

5340-12-701-4554
Loop Clamp

127014554
VG95211-ML-127014554: RNCC: 2 | RNVC: 2
5.12.5314.1003.99: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-8078
Retaining Strap

121718078
06671500108: RNCC: 3 | RNVC: 2
20MAN217: RNCC: 5 | RNVC: 2

18 Nov 1977

5340-12-011-6413

5340-12-304-3362
Dust And Moisture Seal Protective Cap

123043362
10 08 201: RNCC: 3 | RNVC: 9
1008201: RNCC: 5 | RNVC: 9

5 Jul 1985

5340-12-020-0843

5340-12-702-5210
Mounting Bracket

127025210
VG95211-ML-127025210: RNCC: 2 | RNVC: 2
5.51.7004.0100.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-325-7817
Mounting Plate

123257817
M-28-009-03.0/05: RNCC: 3 | RNVC: 2

9 Jul 1991

5340-12-193-9379
Spring Tension Clip

121939379
50250: RNCC: 3 | RNVC: 2
C 6706 716: RNCC: 5 | RNVC: 2
50 250: RNCC: 5 | RNVC: 2
MA2292/13: RNCC: 5 | RNVC: 2
C 6706 716: RNCC: 5 | RNVC: 2

15 Sep 1982

5340-12-306-0706
Mending Plate

123060706
5801984-201010.004.0: RNCC: 2 | RNVC: 2
5801984-201010.004.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-352-2710
Dust And Moisture Seal Protective Plug

123522710
5600023-200200.003.0: RNCC: 2 | RNVC: 2
5600023-200200.003.0: RNCC: 3 | RNVC: 2
1519530: RNCC: 5 | RNVC: 2
22014.0.06.000.07: RNCC: 5 | RNVC: 9

31 Oct 2000

5340-12-133-5387
Turnbuckle

121335387
DIN1480-SPM18X200-HAKEN-OESE-A3P: RNCC: 2 | RNVC: 2
SP-DIN1480-M18X200-H/OE-TZN600: RNCC: 3 | RNVC: 2
4000018V: RNCC: 5 | RNVC: 2
SP-DIN1480-M18X200-H/OE-A3P: RNCC: 5 | RNVC: 2
SP-DIN1480-M18X200-H/OE-ZN: RNCC: 5 | RNVC: 2
NR.010 M18X200 VERZINKT: RNCC: 5 | RNVC: 2
DIN1480 SP-RH M18X200 GALZN: RNCC: 5 | RNVC: 2
DIN1480 M18X200 GALZN HAKEN OESE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-146-9061
Mending Plate

121469061
2360-390000.27.0: RNCC: 2 | RNVC: 2
2360-390000.27.0: RNCC: 3 | RNVC: 2
2360-390000.27.0: RNCC: 3 | RNVC: 2
2360-390000-27-0: RNCC: 5 | RNVC: 2
2360-390000.27.0: RNCC: 5 | RNVC: 2
2360-390000.27.0: RNCC: 5 | RNVC: 9
2360-390000-27-0: RNCC: 5 | RNVC: 9
2360-390000.27.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-9824
Manual Control Handle

123689824
SK861-970010.000.0: RNCC: 3 | RNVC: 2

10 May 2006

5340-12-339-7087
Mending Plate

123397087
2500255-190000.019.0: RNCC: 2 | RNVC: 2
2500255-190000.019.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-305-9807
Door Button

123059807
1865-010250.01.0: RNCC: 3 | RNVC: 9

16 Jan 1986

5340-12-347-4374
Nonmetallic Bumper

123474374
176813: RNCC: 3 | RNVC: 9

10 Dec 1998

5340-12-338-1470
Friction Catch Stud

123381470
0906902: RNCC: 3 | RNVC: 2
EZ09069: RNCC: 5 | RNVC: 2

30 May 1995

5340-12-314-5434
Mending Plate

123145434
4354290640: RNCC: 3 | RNVC: 2
435 429 06 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-011-5815

5340-12-010-4325

5340-12-125-2487

5340-12-354-5976
Mending Plate

123545976
2125-113340.00C: RNCC: 2 | RNVC: 2
2125-113340.00C: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-333-9170
Mending Plate

123339170
404-26: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-12-383-1423
Dust And Moisture Seal Protective Plug

123831423
926A0600-01: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-12-313-7985
Retaining Strap

123137985
1684046-100.10: RNCC: 3 | RNVC: 2

6 May 1988

5340-12-192-9355
Rod End Clevis

121929355
PAN4552-2L: RNCC: 3 | RNVC: 2

7 Jun 1982

5340-12-159-0510
Electrical-Mechanical Equipment Post

121590510
VG95148B14XM6X77-AL: RNCC: 2 | RNVC: 2
VG95148B14XM6X77-AL: RNCC: 3 | RNVC: 2
51-2401-015-04: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-382-6606
Mounting Bracket

123826606
244377: RNCC: 3 | RNVC: 2
32936: RNCC: 5 | RNVC: 2

21 Jul 2010

5340-12-181-1729
Loop Clamp

121811729
251156000009: RNCC: 3 | RNVC: 2
251156000009: RNCC: 5 | RNVC: 2

29 Oct 1979

5340-12-357-8816
Retaining Bail

123578816
2300042-255500.004: RNCC: 2 | RNVC: 2
2300042-255500.004: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-12-379-5757
Strap Hinge

123795757
S537M3004211: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-12-387-8513
Spring Tension Clip

123878513
7093784: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-332-2582
Plain Solid Disk

123322582
2410030032: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-374-0753
Mounting Bracket

123740753
WTG200441: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-12-024-3276

5340-12-372-0538
Mounting Bracket

123720538
15004056: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-176-3573
Angle Bracket

121763573
8411662: RNCC: 3 | RNVC: 2
1646-090: RNCC: 5 | RNVC: 2
1646090: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-333-9810
Mechanic Equipment Hardware Kit

123339810
U100-3460-000: RNCC: 2 | RNVC: 2
U100-3460-000: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-12-320-2153
Angle Bracket

123202153
5057600-00422: RNCC: 3 | RNVC: 2

19 Dec 1989

5340-12-126-4066
Helical Compression Spring Seat

121264066
14016419400: RNCC: 3 | RNVC: 2
50-03: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-337-2797
Double Angle Bracket

123372797
326-55-0100-14: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-12-390-7012
Dust And Moisture Seal Protective Cover

123907012
F1.4553-30-01-37.00.00: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-183-1804
Dust And Moisture Seal Protective Cap

121831804
PAN3860-08: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-386-5839
Mounting Plate

123865839
2500262-063200.000.0: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-330-7033
Webbing Strap

123307033
7300038-5000: RNCC: 2 | RNVC: 2
79017/026/SCHLAUFE-2795-2260SCHE: RNCC: 3 | RNVC: 2
79017/026/SCHLAUFE2795-2260/271: RNCC: 3 | RNVC: 2
6.373-467.0: RNCC: 5 | RNVC: 2
79017/026/SCHLAUFE2795-2260/271: RNCC: 5 | RNVC: 9
6.373-467: RNCC: 5 | RNVC: 9

28 Jan 1993

5340-12-394-3724
Snap Hook

123943724
4293 1/2 I-40: RNCC: 3 | RNVC: 2

26 Nov 2013

5340-12-701-2013
Lock-Release Lever

127012013
VG95211-ML-127012013: RNCC: 2 | RNVC: 2
5.12.0603.0490.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-1697
Mounting Bracket

127011697
VG95211-ML-127011697: RNCC: 2 | RNVC: 2
5.12.0237.2520.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-4389
Lock Bolt

123614389
5981-188410.000.0: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-701-6024
Retaining Strap

127016024
VG95211-ML-127016024: RNCC: 2 | RNVC: 2
5.12.6601.1070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-325-6249
Double Angle Bracket

123256249
5801984-985000.002.0: RNCC: 2 | RNVC: 2
7800755002: RNCC: 3 | RNVC: 2
5801984-985000.002.0: RNCC: 5 | RNVC: 2
5801984-985000.002.0: RNCC: 5 | RNVC: 2
78007 55002: RNCC: 5 | RNVC: 9

24 Jun 1991

5340-12-342-0117
Dust And Moisture Seal Protective Cap

123420117
07.9214-001.1/00: RNCC: 3 | RNVC: 2
07/9214-001.1: RNCC: 5 | RNVC: 2
07-9214-0011: RNCC: 5 | RNVC: 2

29 Nov 1996

5340-12-358-1346
Detent Plunger

123581346
4000A-310410.001.0: RNCC: 2 | RNVC: 2
4000A-310410.001.0: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-318-7647
Mending Plate

123187647
704-126100-912-0: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-171-3392
Angle Bracket

121713392
2382-390000.07.0: RNCC: 2 | RNVC: 2
2382-390000.07.0: RNCC: 3 | RNVC: 2
2382-390000.07.0: RNCC: 5 | RNVC: 2
2382-390000-07-0: RNCC: 5 | RNVC: 9
2382-390000.07.0: RNCC: 5 | RNVC: 9

30 Sep 1977

5340-12-388-6157
Butt Hinge

123886157
E698: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-383-2516
Access Cover

123832516
0002218-802: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-12-351-0523
Snap Hook

123510523
0009881196: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-151-1302
Retaining Strap

121511302
BD70MMN346MS: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-393-3321
Permanent Magnet

123933321
152036401: RNCC: 3 | RNVC: 2
152036401: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-12-344-3392
Mending Plate

123443392
81429400214: RNCC: 3 | RNVC: 2
81.42940.0214: RNCC: 5 | RNVC: 2

17 Oct 1997

5340-12-306-3951
Angle Bracket

123063951
0240.2: RNCC: 3 | RNVC: 2
GT13.1: RNCC: 5 | RNVC: 2

25 Feb 1986

5340-12-302-4102
Helical Compression Spring Seat

123024102
1015.4.012001.4: RNCC: 3 | RNVC: 2
0791598: RNCC: 5 | RNVC: 2
1015.4012001.4: RNCC: 5 | RNVC: 2

28 Dec 1984

5340-12-328-8827
Casement Fastener

123288827
0.25.0103.4/0.25.0567.0: RNCC: 3 | RNVC: 2
0.25.103.4+0.25.567.0: RNCC: 5 | RNVC: 2

27 Jun 1992

5340-12-315-6765
Angle Bracket

123156765
22327304: RNCC: 3 | RNVC: 2
4.453703: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-340-0055
Loop Clamp

123400055
1215 1015: RNCC: 3 | RNVC: 2
12151015EE0120-21: RNCC: 5 | RNVC: 2
6.000.9.977.519.4: RNCC: 5 | RNVC: 9

13 Feb 1996

5340-12-164-7190
Dust And Moisture Seal Protective Cap-Plug

121647190
900A9: RNCC: 3 | RNVC: 2
GPN900A9: RNCC: 5 | RNVC: 2
81.96002-0516: RNCC: 5 | RNVC: 2
81960020516: RNCC: 5 | RNVC: 2
01167311: RNCC: 5 | RNVC: 2
900000900: RNCC: 5 | RNVC: 9
A9: RNCC: 5 | RNVC: 9
A9GPN900: RNCC: 5 | RNVC: 9
GPN900,A9: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-3843
Shimmy Damper

123143843
16-4-271-200-A30-B30-700N: RNCC: 3 | RNVC: 2
11394 016 829 D 700N: RNCC: 5 | RNVC: 2
16-4-271-200-A15-B16-700N: RNCC: 5 | RNVC: 2

1 Jul 1988

5340-12-195-8508
Electrical-Mechanical Equipment Post

121958508
VG95148A8XM4X19,8-AL: RNCC: 2 | RNVC: 2
VG95148A8XM4X19,8-AL: RNCC: 3 | RNVC: 2
5951179: RNCC: 3 | RNVC: 2
595.1179: RNCC: 5 | RNVC: 2

25 Apr 1983

5340-12-122-0324
Turnbuckle

121220324
27-103-03H05: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-190-2718
Nonmetallic Solid Wheel

121902718
02-0899-180620.01.0: RNCC: 3 | RNVC: 2
02-0899-180620-01-0: RNCC: 5 | RNVC: 2

17 Nov 1981

5340-12-383-5721
Loop Clamp

123835721
242950: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-12-367-6417
Dust And Moisture Seal Protective Cover

123676417
281843821A: RNCC: 3 | RNVC: 2

17 Sep 2005

5340-12-360-0455
Support Hook

123600455
9416800151: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-360-1410
Dust And Moisture Seal Protective Cap

123601410
280ER10: RNCC: 3 | RNVC: 2
GPN280ER10: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-381-5754
Webbing Strap

123815754
7092376: RNCC: 3 | RNVC: 2

5 Mar 2010

5340-12-187-4949
Retaining Strap

121874949
2300109-120000.004.0: RNCC: 2 | RNVC: 2
2300109-120000.004.0: RNCC: 3 | RNVC: 2
2300109-120000.004.0: RNCC: 5 | RNVC: 2
2300109-120000.004.0: RNCC: 5 | RNVC: 2
2300109-120000.004.0: RNCC: 5 | RNVC: 9
2300109-120000-004-0: RNCC: 5 | RNVC: 9

10 Apr 1981

5340-12-316-4751
Angle Bracket

123164751
P-050301-001: RNCC: 3 | RNVC: 2
P050301-001: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-346-2439
Loop Clamp

123462439
1201 9564: RNCC: 3 | RNVC: 2
A26.617-240/3.4: RNCC: 5 | RNVC: 9

2 Jul 1998

5340-12-182-1494
Retaining Strap

121821494
5800823-03964: RNCC: 3 | RNVC: 2
5800823-03964: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-700-8789
Loop Clamp

127008789
VG95211-ML-127008789: RNCC: 2 | RNVC: 2
1730S-52-20: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-324-4138
Retaining Strap

123244138
23182-9708: RNCC: 2 | RNVC: 2
30060: RNCC: 3 | RNVC: 2
23182-9708: RNCC: 5 | RNVC: 9

14 Feb 1991

5340-12-026-2472

5340-12-359-8113
Spacing Threaded Standoff

123598113
2264062: RNCC: 3 | RNVC: 2
2264.062: RNCC: 5 | RNVC: 2
EH2264.062: RNCC: 5 | RNVC: 2

12 Mar 2003

5340-12-126-5107

5340-12-323-9423
Access Cover

123239423
060.20.0093: RNCC: 3 | RNVC: 2
060.20.0003: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-044-4626

5340-12-092-0923

5340-12-154-5431
Dust And Moisture Seal Protective Cap-Plug

121545431
021: RNCC: 3 | RNVC: 2
610U21: RNCC: 3 | RNVC: 2
GPN610U21: RNCC: 5 | RNVC: 2
9560111460: RNCC: 5 | RNVC: 2
318.422: RNCC: 5 | RNVC: 2
U21: RNCC: 5 | RNVC: 9
U21GPN610: RNCC: 5 | RNVC: 9
610002100: RNCC: 5 | RNVC: 9
GPN610,U21: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-8241
Bow Handle

123168241
VG95149A102X28X10XM4ST-NI: RNCC: 2 | RNVC: 2
3555613: RNCC: 3 | RNVC: 2

16 Feb 1989

5340-12-170-8863
Helical Compression Spring Retainer

121708863
7000502-1: RNCC: 3 | RNVC: 2
47014014: RNCC: 5 | RNVC: 2
81.52170-0004: RNCC: 5 | RNVC: 2
81521700004: RNCC: 5 | RNVC: 2

19 Aug 1977

5340-12-165-8054
Hinge Torsion Bar

121658054
2360-189373.01.0: RNCC: 2 | RNVC: 2
2360-189373.01.0: RNCC: 3 | RNVC: 2
2360-189373-01-0: RNCC: 5 | RNVC: 2
2360-189373.01.0: RNCC: 5 | RNVC: 2
2360-189373.01.0: RNCC: 5 | RNVC: 2
2360-189373-01-0: RNCC: 5 | RNVC: 9
2360-189373.01.0: RNCC: 5 | RNVC: 9
2360-189373.01.0: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-12-305-5351
Angle Bracket

123055351
P-296819-055: RNCC: 3 | RNVC: 2
P296819-055: RNCC: 5 | RNVC: 2

19 Nov 1985

5340-12-196-9009
Butt Hinge

121969009
A-243818-413: RNCC: 3 | RNVC: 2
A243818-413: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-164-4420
Rod End Connector

121644420
2360-185000.04.0: RNCC: 2 | RNVC: 2
2360-185000.04.0: RNCC: 3 | RNVC: 2
2360-185000.04.0: RNCC: 3 | RNVC: 2
2360-185000.04.0: RNCC: 3 | RNVC: 2
2360-185000-04-0: RNCC: 5 | RNVC: 2
2360-185000-04-0: RNCC: 5 | RNVC: 2
2360-185000-04-0: RNCC: 5 | RNVC: 9
2360-185000.04.0: RNCC: 5 | RNVC: 9
2360-185000.04.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-0465
Loop Clamp

121880465
DIN3016-1-E2-16-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.2X16/15: RNCC: 3 | RNVC: 2
DIN3016-E2-16-16X15-W1-2: RNCC: 3 | RNVC: 2
4209215006: RNCC: 5 | RNVC: 2
RSGU2X6-15: RNCC: 5 | RNVC: 2
RSGU2X6/15: RNCC: 5 | RNVC: 2
DIN3016-E2-16-16X15-W1-2: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-190-9812
Dust And Moisture Seal Protective Cap

121909812
47-1156-000400.004.0: RNCC: 3 | RNVC: 2
47-1156-000400-004-0: RNCC: 5 | RNVC: 2

30 Dec 1981

5340-12-363-3228
Mounting Bracket

123633228
50 03 03-00-F-02-00-00: RNCC: 3 | RNVC: 2

26 May 2004

5340-12-175-7294
Resilient Mount

121757294
DIN95368-C1-3-NR60-ST: RNCC: 2 | RNVC: 2
786030MITTEL: RNCC: 5 | RNVC: 2
KONUS-LAGER-786030.NR60.ST: RNCC: 5 | RNVC: 2
57860300042: RNCC: 5 | RNVC: 2
7860 30 60SHORES: RNCC: 5 | RNVC: 9
VG95368-C1-3-NR60ST: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-12-313-8805
Rod End Clevis

123138805
8519140: RNCC: 3 | RNVC: 2
4-1412-057: RNCC: 5 | RNVC: 2
1412057: RNCC: 5 | RNVC: 2

17 May 1988

5340-12-164-0208
Hand Crank

121640208
VG85086-A-150X12-GT: RNCC: 2 | RNVC: 2
VG85086-A-150X12-GT: RNCC: 3 | RNVC: 2
VG85086-A-150X12-GT: RNCC: 3 | RNVC: 2
VG85086-A-150X12-GT: RNCC: 3 | RNVC: 9
A150X12VG85086GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-6233
Loop Clamp

123636233
DIN3016-1-D1-16X12-W1-2-NBR: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-372-8582
Retaining Strap

123728582
Y000106.00: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-12-394-6164
Multiple Angle Bracket

123946164
129349: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-191-6192
Double Angle Bracket

121916192
42403045: RNCC: 3 | RNVC: 2
42403045EE5035-71: RNCC: 5 | RNVC: 2

16 Feb 1982

5340-12-389-3777
Mounting Bracket

123893777
41210697: RNCC: 3 | RNVC: 2

28 Jun 2012

5340-12-169-2027
Friction Catch Stud

121692027
WW 310 212 D: RNCC: 2 | RNVC: 2
WW 310 212 D: RNCC: 3 | RNVC: 2
WW310212B: RNCC: 5 | RNVC: 2
WW310212C: RNCC: 5 | RNVC: 2
WW 310 212 D: RNCC: 5 | RNVC: 2
WW310212B: RNCC: 5 | RNVC: 2
WW310212C: RNCC: 5 | RNVC: 2
WW 310 212 B: RNCC: 5 | RNVC: 2
WW 310 212 C: RNCC: 5 | RNVC: 2
WW 310 212 D: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-199-5086
Door Button

121995086
100429-32310.06.0: RNCC: 2 | RNVC: 2
100429-32310.06.0: RNCC: 3 | RNVC: 2
100429-32310.06.0: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-300-9380
Double Angle Bracket

123009380
1423-200.22(3): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-302-7869
Mending Plate

123027869
CF 339 384 C: RNCC: 3 | RNVC: 2
CF 339 384 C: RNCC: 3 | RNVC: 2
CF 339 384 B: RNCC: 5 | RNVC: 2
CF 339 384 B: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-701-9539
Rod End Clevis

127019539
VG95211-ML-127019539: RNCC: 2 | RNVC: 2
5.12.6401.0071.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-362-3210
Electronic Equipment Hardware Kit

123623210
18017-0000-00-0: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-329-0569
Protection Bellows

123290569
5077 304 246: RNCC: 3 | RNVC: 2
3.3303-9200.1: RNCC: 5 | RNVC: 2
5077304246: RNCC: 5 | RNVC: 2
03.3303-9200.1: RNCC: 5 | RNVC: 9

15 Jul 1992

5340-12-150-8618
Webbing Strap

121508618
390004-320: RNCC: 2 | RNVC: 2
390004-320: RNCC: 3 | RNVC: 2
390004-320: RNCC: 5 | RNVC: 9
390004-320: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-152-8902
Clamping Catch

121528902
DIN3134-E95-K18X46BK-U: RNCC: 2 | RNVC: 2
DIN3134-E95-K18X48-BK-U: RNCC: 5 | RNVC: 2
DL95DIN3134: RNCC: 5 | RNVC: 2
DL95DIN3134R0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-192-3308
Shimmy Damper

121923308
4603170212: RNCC: 3 | RNVC: 2
721 1 31 135 2: RNCC: 5 | RNVC: 9

15 Apr 1982

5340-12-327-6753
Hand Crank

123276753
C 3789 210: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-363-1688
Caster Wheel

123631688
180960-7: RNCC: 3 | RNVC: 2

7 May 2004

5340-12-382-5183
Hand Crank

123825183
000605-201100.00 KURBEL M LASCHE: RNCC: 3 | RNVC: 2

1 Jul 2010

5340-12-004-0103

5340-12-004-0503

5340-12-339-6851
Turnbuckle Body

123396851
480-1551-05-00-01: RNCC: 3 | RNVC: 2
480 1551 05 00 01: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-360-1413
Dust And Moisture Seal Protective Cap

123601413
280ER15: RNCC: 3 | RNVC: 2
GPN280ER15: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-195-2415
Retaining Strap

121952415
BSS10X25X3: RNCC: 3 | RNVC: 2
5300000010: RNCC: 5 | RNVC: 2
4730000471: RNCC: 5 | RNVC: 2
15300000010: RNCC: 5 | RNVC: 2
S1306P0S19: RNCC: 5 | RNVC: 9

27 Jan 1983

5340-12-301-2398
Plain Solid Disk

123012398
4179369: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-318-1345
Mounting Bracket

123181345
2121329012: RNCC: 3 | RNVC: 2
81.19103.0008: RNCC: 5 | RNVC: 2
81191030008: RNCC: 5 | RNVC: 2

14 Jun 1989

5340-12-181-7399
Loop Clamp

121817399
04-339: RNCC: 3 | RNVC: 2

14 Dec 1979

5340-12-366-3300
Access Cover

123663300
2783574: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-12-330-8021
Hinge Torsion Bar

123308021
4B46143: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-12-343-0966
Mounting Bracket

123430966
5080-241: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-703-1102
Pawl Fastener

127031102
VG95211-ML-127031102: RNCC: 2 | RNVC: 2
7G.ZAB-9208-1348: RNCC: 3 | RNVC: 2
0500862618299: RNCC: 5 | RNVC: 2
7G.3AB-9208-1348: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-385-0462
Dust And Moisture Seal Protective Cap

123850462
F1.1289-37-10-00.00-08: RNCC: 3 | RNVC: 2

21 Apr 2011

5340-12-393-9346
Vent Plug

123939346
310346: RNCC: 3 | RNVC: 2
5184-02-00-06/35: RNCC: 5 | RNVC: 2

23 Oct 2013

5340-12-310-2341
Detent Plunger

123102341
1250 307 601: RNCC: 3 | RNVC: 2
81.32523-0114: RNCC: 5 | RNVC: 2
81325230114: RNCC: 5 | RNVC: 2
1250307601: RNCC: 5 | RNVC: 2
0691776: RNCC: 5 | RNVC: 2
1250307601: RNCC: 5 | RNVC: 2
91090446: RNCC: 5 | RNVC: 2
691776: RNCC: 5 | RNVC: 9

23 Apr 1987

5340-12-334-7038
Mounting Plate

123347038
1300983-50000.01: RNCC: 2 | RNVC: 2
IR0111-50000.01: RNCC: 3 | RNVC: 2

10 Jun 1994

5340-12-171-5809
Nonmetallic Bumper

121715809
1392253-070038.002: RNCC: 3 | RNVC: 2
1392253-070038.002: RNCC: 3 | RNVC: 2
1392253-070038.002: RNCC: 5 | RNVC: 9
1392253-070038-002: RNCC: 5 | RNVC: 9
1392253-070038.002: RNCC: 5 | RNVC: 9
1392253-070038-002: RNCC: 5 | RNVC: 9

26 Oct 1977

5340-12-329-3201
Angle Bracket

123293201
1300555-580000-01-01: RNCC: 2 | RNVC: 2
VS5023T050: RNCC: 3 | RNVC: 2
VS5023T050: RNCC: 5 | RNVC: 9

5 Aug 1992

5340-12-702-5504
Mounting Bracket

127025504
VG95211-ML-127025504: RNCC: 2 | RNVC: 2
5.51.7215.0009.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-3003
Mounting Plate

123213003
15003-001-025: RNCC: 3 | RNVC: 2
15003-01-25: RNCC: 5 | RNVC: 9

30 Apr 1990

5340-12-702-5831
Angle Bracket

127025831
VG95211-ML-127025831: RNCC: 2 | RNVC: 2
5.51.9205.0000.09: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-152-8765
Nonmetallic Bumper

121528765
98602101: RNCC: 3 | RNVC: 2
C34680: RNCC: 3 | RNVC: 2
5990-467: RNCC: 5 | RNVC: 2
5990467: RNCC: 5 | RNVC: 2
837-5990-467: RNCC: 5 | RNVC: 2
837-C34680.NBR60: RNCC: 5 | RNVC: 2
D34743: RNCC: 5 | RNVC: 2
D34743: RNCC: 5 | RNVC: 9
C34680: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-2637
Retaining Band

123032637
P-886672-401: RNCC: 3 | RNVC: 2
P886672-401: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-193-6988
Manual Control Handle

121936988
8-9419-00: RNCC: 2 | RNVC: 2
8-9419.00: RNCC: 2 | RNVC: 2
8-9419.00: RNCC: 3 | RNVC: 2
8-9419.00: RNCC: 5 | RNVC: 9
8-9419-00: RNCC: 5 | RNVC: 9

24 Aug 1982

5340-12-196-9498
Pad Eye

121969498
4900059-323462.000.0: RNCC: 3 | RNVC: 2
4900059-323462-000-0: RNCC: 5 | RNVC: 2
4900059-323462-000.0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-344-4478
Mounting Bracket

123444478
P-296880-055: RNCC: 3 | RNVC: 2
P296880-055: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-384-2906
Antipilferage Seal

123842906
9272894000: RNCC: 3 | RNVC: 2
9272894000: RNCC: 5 | RNVC: 2
23902: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-383-3784
Double Angle Bracket

123833784
82974860011: RNCC: 3 | RNVC: 2
82.97486.0011: RNCC: 5 | RNVC: 2

13 Oct 2010

5340-12-383-7930
Angle Bracket

123837930
601241-621010.02: RNCC: 2 | RNVC: 2
601241-621010.02: RNCC: 3 | RNVC: 2

8 Dec 2010

5340-12-312-7022
Webbing Strap

123127022
5800267-1591: RNCC: 2 | RNVC: 2
5800267-1591: RNCC: 3 | RNVC: 9
5800267-1591: RNCC: 5 | RNVC: 2
C22155-A3-B130: RNCC: 5 | RNVC: 2
5800267-1591: RNCC: 5 | RNVC: 2
000-A2-25X2,0X360-PE-RAL6031: RNCC: 6 | RNVC: 9

28 Jan 1988

5340-12-323-5691
Ball Socket Seat

123235691
01TC30225-01: RNCC: 3 | RNVC: 2

7 Dec 1990

5340-12-367-0437
Mounting Bracket

123670437
PIKVWI15/15: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-172-8456
Dust And Moisture Seal Protective Cap-Plug

121728456
4026010056: RNCC: 3 | RNVC: 2
N25-00043: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-388-0291
Loop Clamp

123880291
F1.1697-00-01-19.00-04: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-12-148-3729
Resilient Mount

121483729
83104601: RNCC: 3 | RNVC: 2
420-204-B-02.04: RNCC: 3 | RNVC: 2
420-204B0204: RNCC: 5 | RNVC: 2
420-204-B-02.04: RNCC: 5 | RNVC: 2
29E02-04-02-04: RNCC: 5 | RNVC: 2
420-204B02-04: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-380-4391
Spacing Threaded Standoff

123804391
GBM3050 15: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-12-367-0434
Mounting Bracket

123670434
PIKVWA30/30VA: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-354-8346
Mounting Plate

123548346
5400049-116822.03: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-300-5357
Flush Catch Claw

123005357
NO PRIMARY REF 12-300-5357: RNCC: 3 | RNVC: 2
61.174.133-13: RNCC: 5 | RNVC: 9

11 Aug 1984

5340-12-330-0841
Dust And Moisture Seal Protective Plug

123300841
600B915: RNCC: 3 | RNVC: 2
GPN600B915: RNCC: 5 | RNVC: 2
GPN600/B915: RNCC: 5 | RNVC: 9
GPN600-B915: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-12-142-7725
Loop Clamp

121427725
110-030.05U08: RNCC: 3 | RNVC: 2
110C3005U8: RNCC: 5 | RNVC: 9
110C30-05U8: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-1231
Rod End Connector

123501231
2125-111630.05B: RNCC: 2 | RNVC: 2
2125-111630.05B: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-12-142-1774
Nonmetallic Bumper

121421774
5800401-8661.001: RNCC: 2 | RNVC: 2
98110301: RNCC: 3 | RNVC: 2
5800401-8661.001: RNCC: 5 | RNVC: 2
5800401-8661.001: RNCC: 5 | RNVC: 2
5800401-8661.001: RNCC: 5 | RNVC: 2
5800401-8661-001: RNCC: 5 | RNVC: 9
8399080 BUTYLKAUTSCHUK: RNCC: 5 | RNVC: 9
5800401-8661-001: RNCC: 5 | RNVC: 9
5800401-8661.001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-4507
Dust And Moisture Seal Protective Plug

123004507
E4-2021600: RNCC: 3 | RNVC: 2
E4-2021600: RNCC: 5 | RNVC: 9
E4-2021600: RNCC: 5 | RNVC: 9

2 Aug 1984

5340-12-306-3320
Kunst Gleitschiene

123063320
029-000124D: RNCC: 3 | RNVC: 2
029-00124D: RNCC: 5 | RNVC: 2
29-0124D: RNCC: 5 | RNVC: 9

19 Feb 1986

5340-12-349-1339
Mounting Bracket

123491339
CZ 63000: RNCC: 3 | RNVC: 2
BOF21287: RNCC: 5 | RNVC: 2
2000: RNCC: 5 | RNVC: 9

29 Sep 1999

5340-12-190-9400
Nonmetallic Solid Wheel

121909400
4213010011: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-366-3106
Access Cover

123663106
4481199: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-12-348-2188
Antipilferage Seal

123482188
010767 0000: RNCC: 3 | RNVC: 2
0107670000: RNCC: 5 | RNVC: 2

10 May 1999

5340-12-359-8282
Mounting Bracket

123598282
300.022.235: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-195-1865
Angle Bracket

121951865
1000126-500000.01: RNCC: 2 | RNVC: 2
1000126-500000.01: RNCC: 3 | RNVC: 2
1000126-500000.01: RNCC: 5 | RNVC: 9
1000126-500000.01: RNCC: 5 | RNVC: 9

24 Jan 1983

5340-12-301-0778
Dust And Moisture Seal Protective Cap

123010778
2502511300: RNCC: 3 | RNVC: 2
VG96924T05E: RNCC: 5 | RNVC: 9

20 Sep 1984

5340-12-359-8000
Dust And Moisture Seal Protective Cap

123598000
81254310083: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-319-7388
Nonmetallic Bumper

123197388
160-72698-01: RNCC: 3 | RNVC: 2
15160-72698.01: RNCC: 5 | RNVC: 2
160-72698-01: RNCC: 5 | RNVC: 9

30 Oct 1989

5340-12-302-8309
Metal Runner

123028309
4900123-1300.03: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-152-4897
Retaining Strap

121524897
6690006-321-04: RNCC: 3 | RNVC: 2
100-4511: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-6604
Angle Bracket

123076604
2300061-051800.012: RNCC: 2 | RNVC: 2
9862326: RNCC: 3 | RNVC: 2
2300061-051800.012: RNCC: 5 | RNVC: 2
9862326: RNCC: 5 | RNVC: 9
2300061-051800.012: RNCC: 5 | RNVC: 9

14 Jul 1986

5340-12-337-7907
Mounting Plate

123377907
465-068340.001: RNCC: 3 | RNVC: 9
9890418: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-12-350-7574
Retaining Band

123507574
81974606037: RNCC: 3 | RNVC: 2
81.97460-6037: RNCC: 5 | RNVC: 2

16 May 2000

5340-12-337-4709
Loop Clamp

123374709
DIN3015-Z-A-3R-18-15-PP-W1: RNCC: 2 | RNVC: 2
RBPR1-218/15: RNCC: 3 | RNVC: 2
SP218/15PP-GD-AS: RNCC: 3 | RNVC: 2
DS218/15 PP: RNCC: 5 | RNVC: 2
DIN3015-Z-A-2R-15-18-PP-W1: RNCC: 5 | RNVC: 2
0934310: RNCC: 5 | RNVC: 2
0934310: RNCC: 5 | RNVC: 9

8 Mar 1995

5340-12-170-5288
Dust And Moisture Seal Protective Cap

121705288
195.454: RNCC: 3 | RNVC: 2
0008242199: RNCC: 5 | RNVC: 2
86038454: RNCC: 5 | RNVC: 2
86038454EE5511-76: RNCC: 5 | RNVC: 2
5516038454: RNCC: 5 | RNVC: 2
0117103: RNCC: 5 | RNVC: 2
000 824 21 99: RNCC: 5 | RNVC: 2
195-454: RNCC: 5 | RNVC: 9
117103: RNCC: 5 | RNVC: 9

20 Jul 1977

5340-12-302-0282
Angle Bracket

123020282
20-5220-090: RNCC: 3 | RNVC: 2

28 Nov 1984

5340-12-356-4945
Access Cover

123564945
027511015: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-12-357-4751
Mending Plate

123574751
A-087118-023: RNCC: 3 | RNVC: 2
A087118-023: RNCC: 5 | RNVC: 2

25 Jun 2002

5340-12-159-3174
Retaining Strap

121593174
DIN72571-1X7-1.4571: RNCC: 2 | RNVC: 2
DIN72571-1X7-1.4571: RNCC: 3 | RNVC: 2
DIN72571-1X7-1.4571: RNCC: 3 | RNVC: 2
1X7DIN72571X5CRNIM0N1810: RNCC: 5 | RNVC: 2
1X7DIN72571-X5CRNIMON1810: RNCC: 5 | RNVC: 2
273.630 970: RNCC: 5 | RNVC: 9
DIN72571-1X7-1.4401: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-171-4384
Dust And Moisture Seal Protective Plug

121714384
81964100282: RNCC: 3 | RNVC: 2
898 011 410 4: RNCC: 5 | RNVC: 2
8980103604: RNCC: 5 | RNVC: 2
A2WN18: RNCC: 5 | RNVC: 2
TL-5-129: RNCC: 5 | RNVC: 2
TL5-129: RNCC: 5 | RNVC: 2
81.96410-0282: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-162-2597
Ball Socket Seat

121622597
4-00136-30100-03: RNCC: 3 | RNVC: 2
14021-11990-03: RNCC: 5 | RNVC: 2
14021-11990-03: RNCC: 5 | RNVC: 9
4-00136-30100-03: RNCC: 5 | RNVC: 9
895108: RNCC: 8 | RNVC: 2

30 May 1969

5340-12-121-3564
Webbing Strap

121213564
9056471558: RNCC: 3 | RNVC: 2
2550-310-1: RNCC: 5 | RNVC: 2
9043 2 038-00: RNCC: 5 | RNVC: 2
90432038-00: RNCC: 5 | RNVC: 2
9043 2 038-00: RNCC: 5 | RNVC: 9
90432038-00: RNCC: 5 | RNVC: 9
5618 046079: RNCC: 5 | RNVC: 9
5618046079: RNCC: 5 | RNVC: 9
6-0925-0003: RNCC: 5 | RNVC: 9
90564 71558: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-8914
Angle Bracket

121978914
A-296710-139: RNCC: 3 | RNVC: 2
A296710-139: RNCC: 5 | RNVC: 2

30 Nov 1983

5340-12-377-7136
Dust And Moisture Seal Protective Plug

123777136
6475633810: RNCC: 3 | RNVC: 2
0029978886: RNCC: 5 | RNVC: 2

5 Feb 2009

5340-12-303-4920
Resilient Mount

123034920
1163500075: RNCC: 3 | RNVC: 2
1165860135: RNCC: 5 | RNVC: 9

27 Mar 1985

5340-12-172-1707
Escutcheon Plate

121721707
3343Z: RNCC: 3 | RNVC: 2

27 Dec 1977

5340-12-307-9286
Plug Button

123079286
2996.60.49: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-348-2851
Spring Tension Clip

123482851
12H4350: RNCC: 3 | RNVC: 2

25 May 1999

5340-12-388-0195
Block Clamp

123880195
5849955368: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-360-9332
Mounting Bracket

123609332
12783803: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-186-9882
Mending Plate

121869882
8730941830: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-370-7988
Nut And Bolt Head Protective Cap

123707988
H1150-M6: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-304-4942
Loop Clamp

123044942
4060900042: RNCC: 3 | RNVC: 2

24 Jul 1985

5340-12-327-5091
Angle Bracket

123275091
6310072: RNCC: 3 | RNVC: 2
631.0072.00: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-12-169-8009
Door Handle

121698009
DIN83104-2: RNCC: 2 | RNVC: 2
4-8000-100-002: RNCC: 3 | RNVC: 2
2DIN83104: RNCC: 5 | RNVC: 2
4-8000-100-002: RNCC: 5 | RNVC: 2

10 Jun 1977

5340-12-377-7427
Angle Bracket

123777427
58R052-6517-1: RNCC: 2 | RNVC: 2
58R052-6517-1: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-12-319-3004
Lock-Release Lever

123193004
5041003001OSOSA: RNCC: 3 | RNVC: 2
0241003001OSOSA: RNCC: 5 | RNVC: 2
504100300/0S0: RNCC: 5 | RNVC: 2
523094: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-12-375-3175
Dust And Moisture Seal Protective Cap

123753175
2008.14,5X12,5RAL9005: RNCC: 3 | RNVC: 2

20 May 2008

5340-12-384-6165
Dust And Moisture Seal Protective Plug

123846165
GL42S: RNCC: 3 | RNVC: 2

14 Mar 2011

5340-12-333-6319
Mounting Plate

123336319
39463: RNCC: 3 | RNVC: 2
GZP 10: RNCC: 5 | RNVC: 2
GZP10: RNCC: 5 | RNVC: 2

17 Jan 1994

5340-12-176-3987
Retaining Band

121763987
CF4071840U: RNCC: 3 | RNVC: 2
CF 407 184 -U: RNCC: 5 | RNVC: 2
CF 407 184 -U: RNCC: 5 | RNVC: 2
CF4071840U: RNCC: 5 | RNVC: 2
CF4071840U: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-374-7861
Stand Base

123747861
E-30E05595: RNCC: 2 | RNVC: 2
E-30E05595: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-12-123-2794
Retaining Strap

121232794
58152: RNCC: 3 | RNVC: 2
0330 3427: RNCC: 5 | RNVC: 2
3303427EF8932-02: RNCC: 5 | RNVC: 2
58152: RNCC: 5 | RNVC: 2
3303427: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-3272
Nonmetallic Bumper

123073272
160-246080-02: RNCC: 3 | RNVC: 2
160-246080-02: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-12-365-6334
Double Angle Bracket

123656334
J53230940-401: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-172-8457
Dust And Moisture Seal Protective Cap-Plug

121728457
4026010063: RNCC: 3 | RNVC: 2
N25-00044: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-365-4758
Access Cover

123654758
1530-050200.000.0: RNCC: 2 | RNVC: 2
1530-050200.000.0: RNCC: 3 | RNVC: 2

7 Jan 2005

5340-12-194-4829
Loop Clamp

121944829
5801082-21109.001: RNCC: 3 | RNVC: 2

9 Nov 1982

5340-12-340-4100
Manual Control Handle

123404100
6700019-201400.09: RNCC: 2 | RNVC: 2
6700019-201400.09: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-365-6354
Angle Bracket

123656354
J92228313-002: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-370-2140
Spring Loaded Cylinder Fastener

123702140
1922-191034.000.0: RNCC: 2 | RNVC: 2
1922-191034.000.0: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-12-369-8566
Spring Loaded Cylinder Fastener

123698566
GN607.1-6-AK-ST: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-12-362-9321
Manual Control Handle

123629321
3.6403-01: RNCC: 3 | RNVC: 2
0009196060: RNCC: 5 | RNVC: 2

16 Apr 2004

5340-12-091-4445

5340-12-361-5072
Butt Hinge

123615072
1054-U16: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-12-339-1391
Mounting Bracket

123391391
10.41.085.00: RNCC: 3 | RNVC: 2
0008631214: RNCC: 3 | RNVC: 2
104108500: RNCC: 5 | RNVC: 9

16 Oct 1995

5340-12-305-3465
Retaining Strap

123053465
823419843: RNCC: 3 | RNVC: 9

24 Oct 1985

5340-12-142-0948

5340-12-364-6461
Spring Loaded Cylinder Fastener

123646461
2212.728: RNCC: 3 | RNVC: 2
EH2212.728: RNCC: 5 | RNVC: 2

16 Oct 2004

5340-12-040-0101

5340-12-303-4372
Flush Lock

123034372
1157200435: RNCC: 3 | RNVC: 2

22 Mar 1985

5340-12-360-1533
Mounting Bracket

123601533
9425002031: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-323-6067
Angle Bracket

123236067
01TC35311: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-350-6049
Loop Clamp

123506049
2996.13.76: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-12-316-9753
Mounting Plate

123169753
1821350017: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-198-2580
Angle Bracket

121982580
2694601: RNCC: 3 | RNVC: 2

5 Jan 1984

5340-12-338-5891
Manual Control Lever

123385891
100372-2017: RNCC: 3 | RNVC: 2
100372-2017: RNCC: 5 | RNVC: 9

31 Jul 1995

5340-12-183-1029
Double Angle Bracket

121831029
42011765: RNCC: 3 | RNVC: 2
42011765EE5048-75: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-352-7134
Access Cover

123527134
64416354: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-317-2775
Nonmetallic Bumper

123172775
24256: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-12-359-0516
Manual Control Lever

123590516
008370844: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-027-9351

5340-12-348-6149
Mounting Bracket

123486149
NN31221P01: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-12-352-2946
Double Angle Bracket

123522946
T537M1021210: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-025-8893

5340-12-364-6582
Angle Bracket

123646582
2339-090040A03B: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-365-7142
Permanent Magnet

123657142
MFS/1656M10: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-194-0399
Rod End Clevis

121940399
8344741-03: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-162-7651
Catch Strike

121627651
91-612-07: RNCC: 3 | RNVC: 2
8450020123: RNCC: 3 | RNVC: 2
1918-722250-013: RNCC: 5 | RNVC: 2
TL100-5: RNCC: 5 | RNVC: 2
TL100-5: RNCC: 5 | RNVC: 9
1918-722250-013: RNCC: 5 | RNVC: 9
1918-722250.013: RNCC: 5 | RNVC: 9
84500 20123: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-3757
Caster Frame

123073757
6100129-30510: RNCC: 2 | RNVC: 2
3781260: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-197-4179
Loop Clamp

121974179
60890: RNCC: 3 | RNVC: 2
2124254: RNCC: 3 | RNVC: 2
60890: RNCC: 5 | RNVC: 2
62640006: RNCC: 5 | RNVC: 2
2640/006: RNCC: 5 | RNVC: 9

20 Oct 1983

5340-12-356-3705
Manual Control Handle

123563705
2339-010093A00C: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-183-9049
Loop Clamp

121839049
2254034: RNCC: 3 | RNVC: 9
N11535: RNCC: 5 | RNVC: 9

29 May 1980

5340-12-355-1069
Double Angle Bracket

123551069
272.401.421: RNCC: 3 | RNVC: 2
272.401 421: RNCC: 5 | RNVC: 9

9 Oct 2001

5340-12-308-1524
Support Hook

123081524
4406172: RNCC: 3 | RNVC: 2

9 Sep 1986

5340-12-353-9991
Mounting Bracket

123539991
506 200 03 40: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-352-2821
Access Cover

123522821
6240402: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-12-377-6915
Support Hook

123776915
54.1100.175.01: RNCC: 3 | RNVC: 2

4 Feb 2009

5340-12-180-8850
Angle Bracket

121808850
2500035-129000-00: RNCC: 2 | RNVC: 2
2500035-129000-00: RNCC: 5 | RNVC: 2
2500035-129000.00: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-328-9242
Plug Button

123289242
PL-AK52145PE181S: RNCC: 3 | RNVC: 2
0662611: RNCC: 5 | RNVC: 2
0521475: RNCC: 5 | RNVC: 2
52145: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-333-0290
Angle Bracket

123330290
328-031000.003: RNCC: 3 | RNVC: 9
00098337370: RNCC: 5 | RNVC: 9
98337370: RNCC: 5 | RNVC: 9

21 Oct 1993

5340-12-701-3661
Pawl Fastener

127013661
VG95211-ML-127013661: RNCC: 2 | RNVC: 2
5.12.5302.1208.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-151-4269
Retaining Strap

121514269
BSN15X20X2: RNCC: 3 | RNVC: 2
15200000015: RNCC: 5 | RNVC: 2
0632 311 153: RNCC: 5 | RNVC: 2
6-472-1071: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-4169
Mounting Bracket

127024169
VG95211-ML-127024169: RNCC: 2 | RNVC: 2
5.12.7020.0310.15: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-328-9052
Butt Hinge Leaf

123289052
SK2405-15: RNCC: 3 | RNVC: 2
SK2405-15: RNCC: 5 | RNVC: 2
2490541: RNCC: 5 | RNVC: 2
5000821586: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-184-2020
Mounting Bracket

121842020
5801357-1300.16D: RNCC: 2 | RNVC: 2
5801357-1300.16D: RNCC: 3 | RNVC: 2
5801357-1300-16D: RNCC: 5 | RNVC: 2
5801357-1300-16D: RNCC: 5 | RNVC: 9
5801357-1300-16D: RNCC: 5 | RNVC: 9

3 Jul 1980

5340-12-370-3320
Manual Control Lever

123703320
1216 1471: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-12-377-3077
Dust And Moisture Seal Protective Cap-Plug

123773077
41260266: RNCC: 3 | RNVC: 2

7 Jan 2009

5340-12-337-3609
Lock-Release Lever

123373609
04009810: RNCC: 3 | RNVC: 2
04009810.873: RNCC: 5 | RNVC: 2

17 Feb 1995

5340-12-336-0560
Dust And Moisture Seal Protective Plug

123360560
63 6390 208 501: RNCC: 3 | RNVC: 2
636390 208 501: RNCC: 5 | RNVC: 2

17 Oct 1994

5340-12-350-4893
Angle Bracket

123504893
10063-710000.10: RNCC: 3 | RNVC: 2
10063-710000.10: RNCC: 5 | RNVC: 9

5 Apr 2000

5340-12-321-8457
Mending Plate

123218457
C249-A37-C86: RNCC: 2 | RNVC: 2
C249-A37-C86: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-359-6342
Angle Bracket

123596342
5801357-1800.32: RNCC: 2 | RNVC: 2
5801357-1800.32: RNCC: 3 | RNVC: 2

24 Feb 2003

5340-12-340-2050
Expansion Plug

123402050
DIN443-A45-ST-BL: RNCC: 2 | RNVC: 2
000443045000: RNCC: 5 | RNVC: 2
A45DIN443: RNCC: 5 | RNVC: 2
A45DIN443-ROH: RNCC: 5 | RNVC: 2
A45DIN443-ST-ROH: RNCC: 5 | RNVC: 2
DIN443-A45: RNCC: 5 | RNVC: 2
DIN443-A45-ST-ROH: RNCC: 5 | RNVC: 2

13 Mar 1996

5340-12-302-7032
Mending Plate

123027032
178.E21.80-145: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-190-3154
Resilient Mount

121903154
ZN70T8K55,2X100: RNCC: 3 | RNVC: 2
ZN70T8K55-2X100: RNCC: 5 | RNVC: 2

19 Nov 1981

5340-12-389-3421
Section Block Clamp

123893421
A11-0033-002: RNCC: 3 | RNVC: 2

22 Jun 2012

5340-12-361-2988
Angle Bracket

123612988
V6560-02016-104: RNCC: 2 | RNVC: 2
V6560-02016-104: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-12-163-2453
Hand Crank

121632453
PI03-180: RNCC: 3 | RNVC: 2
1918-041409: RNCC: 5 | RNVC: 2
1918-041409: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-6105
Mounting Bracket

123226105
2079-111000.11B: RNCC: 3 | RNVC: 2

6 Sep 1990

5340-12-701-9909
Loop Clamp

127019909
VG95211-ML-127019909: RNCC: 2 | RNVC: 2
155N464-183: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-386-2209
Loop Clamp

123862209
DIN3016-1-D1-24X20-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Aug 2011

5340-12-150-7846
Mending Plate

121507846
1206 3765: RNCC: 3 | RNVC: 2
12063765: RNCC: 5 | RNVC: 2
30.20-085/6.4: RNCC: 5 | RNVC: 2
30-20-085-6-4: RNCC: 5 | RNVC: 9
30.20-085/6.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-384-2420
Loop Clamp

123842420
DIN3016-1-D2-6-8X15-W1-2-CR: RNCC: 2 | RNVC: 2

7 Feb 2011

5340-12-306-2996
Mending Plate

123062996
2300163-192513.000.0: RNCC: 3 | RNVC: 2
1283413: RNCC: 5 | RNVC: 2

17 Feb 1986

5340-12-164-9131
Dust And Moisture Seal Protective Cap

121649131
30-79501-0027: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-316-8875
Handle Grip

123168875
01800-0000-01-10: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-319-1578
Mounting Bracket

123191578
2654-332600.04: RNCC: 2 | RNVC: 2
2654-332600.04: RNCC: 3 | RNVC: 2
679-02050000.04: RNCC: 5 | RNVC: 9
679-02050000.04: RNCC: 5 | RNVC: 9
2654-332 600.04: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-346-4728
Retaining Strap

123464728
06670650220: RNCC: 3 | RNVC: 2
M7.750-60-S2X28-6-ST-A4C: RNCC: 5 | RNVC: 2

28 Jul 1998

5340-12-317-9983
Nonmetallic Bumper

123179983
40 0130 086: RNCC: 2 | RNVC: 2
40 0130 086: RNCC: 3 | RNVC: 2
04.54150-0003000.4: RNCC: 5 | RNVC: 2
400130086: RNCC: 5 | RNVC: 2
40 0130 086: RNCC: 5 | RNVC: 9

2 Jun 1989

5340-12-301-3810
Angle Bracket

123013810
P-856232-001: RNCC: 3 | RNVC: 2
P856232-001: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-346-3747
Double Angle Bracket

123463747
2300348-183020.005.0: RNCC: 2 | RNVC: 2
2300348-183020.005.0: RNCC: 3 | RNVC: 2
1808508: RNCC: 5 | RNVC: 2

20 Jul 1998

5340-12-336-0453
Metallic Bumper

123360453
RS12140: RNCC: 3 | RNVC: 2

14 Oct 1994

5340-12-198-9582
Mending Plate

121989582
001-111-22: RNCC: 3 | RNVC: 2

15 Mar 1984

5340-12-359-0518
Manual Control Lever

123590518
0008370444: RNCC: 3 | RNVC: 2
92.263.41.505: RNCC: 5 | RNVC: 2

12 Dec 2002

5340-12-197-6420
Helical Compression Spring Seat

121976420
3171702: RNCC: 3 | RNVC: 2

10 Nov 1983

5340-12-317-4099
Multiple Angle Bracket

123174099
3095405173: RNCC: 3 | RNVC: 2

5 Apr 1989

5340-12-327-3428
Extension Drawer Slide Section

123273428
AWN186-E2: RNCC: 3 | RNVC: 2
AWN186-E2: RNCC: 3 | RNVC: 2
AWN186-E2: RNCC: 5 | RNVC: 9

14 Jan 1992

5340-12-182-3249
Cremone Bolt

121823249
6000415: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-371-5450
Nonmetallic Bumper

123715450
7D0806601: RNCC: 3 | RNVC: 2
7D0 806 601: RNCC: 5 | RNVC: 2

17 Apr 2007

5340-12-179-5069
Angle Bracket

121795069
183807349: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-139-7950

5340-12-344-5888
Lock-Release Lever

123445888
5803513-235100.00: RNCC: 2 | RNVC: 2
55.0205.612.00: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-302-7877
Mending Plate

123027877
CF 493 045: RNCC: 3 | RNVC: 2
CF 493 045 A: RNCC: 3 | RNVC: 2
CF 493 045: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-354-0664
Vent Plug

123540664
00154-020-000: RNCC: 3 | RNVC: 2

30 May 2001

5340-12-349-2833
Butt Hinge Leaf

123492833
J52423272-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-324-8432
Kunst Gleitschiene

123248432
6600133-331110.011: RNCC: 2 | RNVC: 2
002 529 100-116: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-702-5038
Retaining Strap

127025038
VG95211-ML-127025038: RNCC: 2 | RNVC: 2
5.51.6500.0180.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-703-3205
Mending Plate

127033205
VG95211-ML-127033205: RNCC: 2 | RNVC: 2
5.12.6113.0500.03: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-702-5303
Mounting Bracket

127025303
VG95211-ML-127025303: RNCC: 2 | RNVC: 2
5.51.7040.0030.04: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-3308
Mounting Plate

123653308
2382-261555.03.0: RNCC: 3 | RNVC: 2
2382-261555-03-0: RNCC: 5 | RNVC: 9

21 Dec 2004

5340-12-363-3301
Retaining Strap

123633301
DIN3016-1-C1-5X9-W1-2: RNCC: 2 | RNVC: 2

27 May 2004

5340-12-193-2556
Shimmy Damper

121932556
5418 136/101.3: RNCC: 3 | RNVC: 2
5418-136: RNCC: 5 | RNVC: 2
5000515610: RNCC: 5 | RNVC: 2
5000515610: RNCC: 5 | RNVC: 9

5 Jul 1982

5340-12-193-0749
Hand Carrying Strap Assembly

121930749
8-4186.00: RNCC: 2 | RNVC: 2
8-4186.00: RNCC: 3 | RNVC: 9
8-4186-00: RNCC: 5 | RNVC: 9
8-4186.00: RNCC: 5 | RNVC: 9

21 Jun 1982

5340-12-366-4490
Multiple Angle Bracket

123664490
50-3-6294-553: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-12-345-9908
Mounting Bracket

123459908
1204 6616: RNCC: 3 | RNVC: 2
12046616EE0112-90: RNCC: 5 | RNVC: 2
3.603.0.637.011.4: RNCC: 5 | RNVC: 9

27 May 1998

5340-12-010-2330

5340-12-138-4456

5340-12-174-8017
Rod End Clevis

121748017
A11A271430713: RNCC: 3 | RNVC: 2

3 Aug 1978

5340-12-349-8854
Mounting Bracket

123498854
54.1038.180.03: RNCC: 2 | RNVC: 2
54.1038.180.03: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-352-2141
Angle Bracket

123522141
T531M4521230: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-178-6756
Retaining Strap

121786756
8732000540: RNCC: 3 | RNVC: 2
8732000540: RNCC: 5 | RNVC: 2
8732000540: RNCC: 5 | RNVC: 9

9 May 1979

5340-12-319-6565
Manual Control Lever

123196565
504674: RNCC: 3 | RNVC: 2
504674: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-376-4177
Mounting Bracket

123764177
050.030.00.0: RNCC: 3 | RNVC: 2
A901 760 02 28: RNCC: 5 | RNVC: 2
9017600228: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-12-347-2997
Access Cover

123472997
4110610348: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-12-375-7003
Mounting Bracket

123757003
L258M2112101: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-12-180-7369
Retaining Strap

121807369
0287 5790: RNCC: 3 | RNVC: 2
2875790ED0704-79: RNCC: 5 | RNVC: 2
2875790: RNCC: 5 | RNVC: 2

1 Oct 1979

5340-12-315-8687
Angle Bracket

123158687
81651035008: RNCC: 3 | RNVC: 2
81.65103.5008: RNCC: 5 | RNVC: 2

3 Dec 1988

5340-12-300-2801
Retaining Strap

123002801
3049951920: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-197-5158
Door Button

121975158
232-MMCH: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-357-1678
Angle Bracket

123571678
2500266-195800.001.0: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-365-1490
Mounting Plate

123651490
2500075-193680.001.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-702-4468
Mounting Bracket

127024468
VG95211-ML-127024468: RNCC: 2 | RNVC: 2
5.51.0240.0860.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-5159
Retaining Strap

123835159
SMJ 234-001-124-310: RNCC: 3 | RNVC: 2
SMJ234-001-124-310: RNCC: 5 | RNVC: 2

2 Nov 2010

5340-12-352-5901
Mounting Plate

123525901
8350-0107: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-177-2745
Detent Plunger

121772745
5800822-051-010: RNCC: 3 | RNVC: 2
5800822-051.010: RNCC: 5 | RNVC: 2

24 Jan 1979

5340-12-360-7899
Crank Handle

123607899
352610: RNCC: 3 | RNVC: 2
10-0076-622: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-12-321-6148
Angle Bracket

123216148
702-146610-000-0: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-128-0299

5340-12-702-6020
Loop Clamp

127026020
VG95211-ML-127026020: RNCC: 2 | RNVC: 2
5158A-9,5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-390-4529
Access Cover

123904529
2300559-188000.703.0: RNCC: 2 | RNVC: 2
2300559-188000.703.0: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-12-331-3532
Loop Clamp

123313532
2250306: RNCC: 3 | RNVC: 2
2037-18-30: RNCC: 5 | RNVC: 2
2250-30-6: RNCC: 5 | RNVC: 9

27 Apr 1993

5340-12-702-0907
Angle Bracket

127020907
VG95211-ML-127020907: RNCC: 2 | RNVC: 2
30.5311.470: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-4917
Mounting Bracket

123154917
4900153-30100-39: RNCC: 2 | RNVC: 2
4900153-30100-39: RNCC: 3 | RNVC: 2
4900153-30100.39: RNCC: 5 | RNVC: 2
4900153-30100.39: RNCC: 5 | RNVC: 2
4900153-30100-39: RNCC: 5 | RNVC: 2

29 Oct 1988

5340-12-159-6049
Strap Fastener Loop

121596049
25029905: RNCC: 3 | RNVC: 2
14021-14015-0001: RNCC: 5 | RNVC: 2
893717: RNCC: 5 | RNVC: 2
14021-14015-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-0824
Butt Hinge

121640824
100356-208000.04: RNCC: 2 | RNVC: 2
100356-208000.04: RNCC: 3 | RNVC: 2
100356-208000-04: RNCC: 5 | RNVC: 2
100356-208000-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-0647
Double Angle Bracket

123220647
5801846-121.003: RNCC: 3 | RNVC: 2

20 Jul 1990

5340-12-339-0438
Lock-Release Lever

123390438
5801357-1930.01: RNCC: 2 | RNVC: 2
5801357-1930.01: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-164-8507
Nonmetallic Bumper

121648507
28 488-001: RNCC: 3 | RNVC: 2
28488-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-166-6408
Spring Tension Clip

121666408
1200009-0200-002: RNCC: 2 | RNVC: 2
2241424031: RNCC: 5 | RNVC: 2
22414 24031: RNCC: 5 | RNVC: 9

30 Sep 1976

5340-12-365-5837
Mounting Bracket

123655837
J28230121-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-172-1701
Friction Catch

121721701
6078: RNCC: 3 | RNVC: 2

27 Dec 1977

5340-12-197-0422
Angle Bracket

121970422
4356887012: RNCC: 3 | RNVC: 2
4356887012: RNCC: 3 | RNVC: 9

13 Sep 1983

5340-12-339-4498
Access Cover

123394498
4220 301 111: RNCC: 3 | RNVC: 2
4220301111: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-352-8699
Support Hook

123528699
SKH10: RNCC: 3 | RNVC: 2

22 Dec 2000

5340-12-175-3542
Loop Clamp

121753542
LN9490B08: RNCC: 2 | RNVC: 2
LN9490B8: RNCC: 5 | RNVC: 2

11 Sep 1978

5340-12-173-8794
Dust And Moisture Seal Protective Cap

121738794
8950712604: RNCC: 3 | RNVC: 2
0695753: RNCC: 5 | RNVC: 2
695753: RNCC: 5 | RNVC: 9

17 May 1978

5340-12-371-4554
Protection Bellows

123714554
94753: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-12-343-1508
Butt Hinge

123431508
5080-209: RNCC: 3 | RNVC: 2

9 May 1997

5340-12-197-1323
Catch Strike

121971323
5801435-060420.01: RNCC: 3 | RNVC: 2
5801435-060420-01: RNCC: 5 | RNVC: 2

22 Sep 1983

5340-12-361-4143
Hand Crank

123614143
464-0010: RNCC: 3 | RNVC: 2
903811901: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-12-300-2084
Loop Clamp

123002084
0287 1640: RNCC: 3 | RNVC: 2
2871639UE0695-79: RNCC: 5 | RNVC: 2
2871640: RNCC: 5 | RNVC: 2
2871640K70695-79: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-198-5878
Angle Bracket

121985878
23114-5059.02: RNCC: 2 | RNVC: 2
23114-5059.02: RNCC: 3 | RNVC: 2
23114-5059.02: RNCC: 5 | RNVC: 9
23114-5059-02: RNCC: 5 | RNVC: 9
23114-5059-02: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-183-2852
Electrical-Mechanical Equipment Post

121832852
5801441-30120-02: RNCC: 3 | RNVC: 2
5801441-30120-02: RNCC: 5 | RNVC: 9
5801441-30120.02: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-185-7807
Strap Bolt

121857807
5800359-010134: RNCC: 3 | RNVC: 2
5800359-010134: RNCC: 5 | RNVC: 9

30 Oct 1980

5340-12-388-3537
Mounting Bracket

123883537
1030124-060210.000.0: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-12-702-4811
Mounting Bracket

127024811
VG95211-ML-127024811: RNCC: 2 | RNVC: 2
5.51.0607.0030.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-2293
Angle Bracket

127012293
VG95211-ML-127012293: RNCC: 2 | RNVC: 2
5.12.2016.5013.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-0988
Bridge Clamp

121870988
C42326A20C135: RNCC: 3 | RNVC: 2
5800573-1112.032: RNCC: 5 | RNVC: 2
C42326-A20.C135: RNCC: 5 | RNVC: 2
5800573-1112-032: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-166-0442
Double Angle Bracket

121660442
100429-21022-03-0: RNCC: 2 | RNVC: 2
100429-21022-03-0: RNCC: 5 | RNVC: 2

29 Jul 1976

5340-12-701-2816
Rod End Connector

127012816
VG95211-ML-127012816: RNCC: 2 | RNVC: 2
5.12.5101.0780.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-154-1845
Nut And Bolt Locking Plate

121541845
624-625-1-2511-03-10: RNCC: 3 | RNVC: 2
624-625-1-2511-03-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-3551
Mounting Bracket

123443551
A-566924-001: RNCC: 3 | RNVC: 2
A566924-001: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-354-8290
Mounting Bracket

123548290
2300458-417700.000: RNCC: 2 | RNVC: 2
9944330: RNCC: 3 | RNVC: 2
2300458-417700.000: RNCC: 5 | RNVC: 9

29 Aug 2001

5340-12-383-1451
Mounting Bracket

123831451
WM 8195: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-12-309-4088
Mending Plate

123094088
WG 401 960: RNCC: 2 | RNVC: 2
WG 401 960: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-159-4502
Rigid Caster

121594502
122GA254RKU: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-179-8460
Vent Plug

121798460
T12971: RNCC: 3 | RNVC: 2
T12971: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-360-1530
Loop Clamp

123601530
9424920140: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-020-5524

5340-12-043-2668

5340-12-374-2807
Section Block Clamp

123742807
5304197: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-12-339-7913
Angle Bracket

123397913
96.4.971.0033: RNCC: 2 | RNVC: 2
SP22109: RNCC: 3 | RNVC: 2
96.4.971.0033: RNCC: 5 | RNVC: 9

18 Jan 1996

5340-12-327-5421
Angle Bracket

123275421
76.3380.0010: RNCC: 3 | RNVC: 2
K 3355.904: RNCC: 5 | RNVC: 2

30 Jan 1992

5340-12-333-8749
Lever Bracket

123338749
1202 8548: RNCC: 3 | RNVC: 2
3.601.9.640.002.4: RNCC: 5 | RNVC: 9

21 Feb 1994

5340-12-337-4403
Angle Bracket

123374403
1515-000198.001.0: RNCC: 2 | RNVC: 2
1515-000198.001.0: RNCC: 3 | RNVC: 2

3 Mar 1995

5340-12-322-2540
Clamp Bolt Assembly

123222540
40 0176 530: RNCC: 2 | RNVC: 2
40 0176 530: RNCC: 3 | RNVC: 2
04 54150-0003400.3: RNCC: 5 | RNVC: 9
40 0176 530: RNCC: 5 | RNVC: 9

6 Aug 1990

5340-12-364-2994
Multiple Angle Bracket

123642994
5981-183970.001.0: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-335-6512
Handle Grip

123356512
073-149002-000-0: RNCC: 2 | RNVC: 2
073-149002-000-0: RNCC: 3 | RNVC: 2

8 Sep 1994

5340-12-303-2423
Mending Plate

123032423
P-886769-001: RNCC: 3 | RNVC: 2
P886769-001: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-361-6697
Swivel Caster

123616697
LH-GTH-125K-1-ST: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-309-4070
Angle Bracket

123094070
4900059-323461.000.0/5: RNCC: 2 | RNVC: 2
4900059-323461.000.0/5: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-12-191-1128
Shimmy Damper

121911128
2-900-802-4170: RNCC: 3 | RNVC: 9
02982534: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-162-5019
Handle Grip

121625019
100356-301000-60: RNCC: 2 | RNVC: 2
100356-301000-60: RNCC: 5 | RNVC: 2
100356-301000.60: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-180-2130
Loop Clamp

121802130
DIN3016-2-G1-55X25X1,5-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-55X25X1,5-W1-2: RNCC: 3 | RNVC: 2
SP55/25SKMAT1,5: RNCC: 3 | RNVC: 2
42010789: RNCC: 5 | RNVC: 2
42010789EZ5035-51: RNCC: 5 | RNVC: 2
1617002055: RNCC: 5 | RNVC: 2
SP55-25SK: RNCC: 5 | RNVC: 2
DIN3016-G1-55X25X1,5-W1-2: RNCC: 5 | RNVC: 9
VG95931-G55X25-W1: RNCC: 5 | RNVC: 9

30 Aug 1979

5340-12-198-3563
Loop Clamp

121983563
23114-3700.09: RNCC: 2 | RNVC: 2
23114-3700.09: RNCC: 3 | RNVC: 2
23114-3700-09: RNCC: 5 | RNVC: 9
23114-3700.09: RNCC: 5 | RNVC: 9
23114-3700-09: RNCC: 5 | RNVC: 9
23114-3700.09: RNCC: 5 | RNVC: 9

19 Jan 1984

5340-12-306-0143
Angle Bracket

123060143
3508701: RNCC: 3 | RNVC: 2
5340-12-310-3343: RNCC: 6 | RNVC: 9

20 Jan 1986

5340-12-702-1791
Mounting Bracket

127021791
VG95211-ML-127021791: RNCC: 2 | RNVC: 2
30.7204.1020: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-8404
Loop Clamp

123018404
3034930343: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-12-385-4564
Angle Bracket

123854564
5841533940: RNCC: 3 | RNVC: 2

6 Jun 2011

5340-12-149-0923
Retaining Strap

121490923
121G10016E1: RNCC: 3 | RNVC: 2
121G10016: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-372-1369
Spacing Threaded Standoff

123721369
15004786: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-12-310-7825
Clamping Catch

123107825
2220320007: RNCC: 3 | RNVC: 2
22203 20007: RNCC: 5 | RNVC: 9

30 Jun 1987

5340-12-359-6390
Spring Tension Clip

123596390
0049889978: RNCC: 3 | RNVC: 2
004 988 99 78: RNCC: 5 | RNVC: 9

24 Feb 2003

5340-12-131-7472

5340-12-162-4526
Spring Tension Clip

121624526
2241428706: RNCC: 3 | RNVC: 2
22414 28706: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-135-6528

5340-12-321-7831
Mounting Plate

123217831
54.2322.719.01: RNCC: 2 | RNVC: 2
54.2322.719.01: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-12-355-5759
Webbing Strap

123555759
17.108.3506.04: RNCC: 2 | RNVC: 2
17.108.3506.04: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-361-7598
Mounting Bracket

123617598
T290M2001210: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-375-1897
Turnbuckle

123751897
L243M3022101: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-12-010-5411

5340-12-366-9500
Flush Lock

123669500
2016.1452: RNCC: 3 | RNVC: 2
2016.1452: RNCC: 5 | RNVC: 2

23 Jun 2005

5340-12-344-1942
Mechanic Equipment Hardware Kit

123441942
3018883: RNCC: 3 | RNVC: 2
3018.883: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-387-6962
Mounting Bracket

123876962
GE5012G138: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-304-7892
Pipe Bracket

123047892
2300107-310542: RNCC: 2 | RNVC: 2
2300107-310542: RNCC: 3 | RNVC: 2
2300107-310542: RNCC: 5 | RNVC: 9
2300107-310542: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-378-0045
Dust And Moisture Seal Protective Plug

123780045
504054951: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-187-7518
Access Hole Frame

121877518
5801114-271: RNCC: 3 | RNVC: 2

4 May 1981

5340-12-315-1083
Angle Bracket

123151083
1-3201-6-3: RNCC: 3 | RNVC: 2
1-3201-6-3: RNCC: 5 | RNVC: 9
1100 5271: RNCC: 5 | RNVC: 9
1-3201-6-3: RNCC: 5 | RNVC: 9

17 Sep 1988

5340-12-384-4802
Dust And Moisture Seal Protective Plug

123844802
7507/4 S: RNCC: 3 | RNVC: 2

28 Feb 2011

5340-12-371-0388
Dust And Moisture Seal Protective Plug

123710388
18-16-90005: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-12-319-5722
Angle Bracket

123195722
5802295-115000: RNCC: 2 | RNVC: 2
7800591290: RNCC: 3 | RNVC: 2
5802295-115000: RNCC: 5 | RNVC: 2
452-315000-000-0: RNCC: 5 | RNVC: 2
78005 91290: RNCC: 5 | RNVC: 9

13 Oct 1989

5340-12-337-8200
Spacing Threaded Standoff

123378200
VG95148C5,5XM3X19,5-NRST: RNCC: 2 | RNVC: 2
4900008-53.002: RNCC: 3 | RNVC: 2

18 Apr 1995

5340-12-701-1659
Mounting Bracket

127011659
VG95211-ML-127011659: RNCC: 2 | RNVC: 2
5.12.0237.1053.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-5486
Mounting Bracket

121875486
6.226.0.623.017.5: RNCC: 3 | RNVC: 2
6-226-0-623-017-5: RNCC: 5 | RNVC: 9
6.226.0.623.017.5: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-354-8282
Lock Key

123548282
4.873-003.0: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-303-8069
Butt Hinge Leaf

123038069
5801411-69091.001: RNCC: 3 | RNVC: 2
5801411-69091-001: RNCC: 5 | RNVC: 2

6 May 1985

5340-12-338-1079
Retaining Strap

123381079
160-75846: RNCC: 3 | RNVC: 2
15160-75846: RNCC: 5 | RNVC: 2
160-75846: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-187-6210
Plain Solid Disk

121876210
5800358-124100.04: RNCC: 3 | RNVC: 2
5800358-124100-04: RNCC: 5 | RNVC: 9
5800358-124100.04: RNCC: 5 | RNVC: 9

21 Apr 1981

5340-12-309-6103
Pad Eye

123096103
2500001-191323.02.0: RNCC: 2 | RNVC: 2
2500001-191323.02.0: RNCC: 3 | RNVC: 2

9 Feb 1987

5340-12-319-9461
Handwheel

123199461
00422-050-000: RNCC: 3 | RNVC: 2
DIN950-AL-400-V22-D-AL: RNCC: 3 | RNVC: 2
422-50-00: RNCC: 5 | RNVC: 9

20 Nov 1989

5340-12-326-6840
Plain Solid Disk

123266840
2580.980589: RNCC: 3 | RNVC: 2
KS/RAT/57: RNCC: 5 | RNVC: 2

21 Oct 1991

5340-12-339-7819
Mounting Plate

123397819
6735579: RNCC: 2 | RNVC: 2
6735579: RNCC: 3 | RNVC: 2
6535579: RNCC: 5 | RNVC: 9
6735579: RNCC: 5 | RNVC: 9

17 Jan 1996

5340-12-043-0918

5340-12-091-2523

5340-12-381-9372
Angle Bracket

123819372
000605-225000.02: RNCC: 2 | RNVC: 2
000605-225000.02: RNCC: 3 | RNVC: 2
44415: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-12-168-2422
Mending Plate

121682422
4H050-0105: RNCC: 3 | RNVC: 2

28 Feb 1977

5340-12-315-5792
Mounting Bracket

123155792
512214-4021.000: RNCC: 3 | RNVC: 2
512214-4021: RNCC: 5 | RNVC: 2

10 Nov 1988

5340-12-361-0364
Mounting Bracket

123610364
J92226421-401: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-194-6786
Mending Plate

121946786
21-9204-4414: RNCC: 3 | RNVC: 9

25 Nov 1982

5340-12-320-1490
Butt Hinge Leaf

123201490
16177-01: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-12-162-6356
Dust And Moisture Seal Protective Cap

121626356
51-1275-010-15: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-0127
Loop Clamp

127020127
VG95211-ML-127020127: RNCC: 2 | RNVC: 2
2-18 OST1 13337-78: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-370-5808
Helical Compression Spring Retainer

123705808
V6520-03011-148: RNCC: 2 | RNVC: 2
V6520-03011-148: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-12-336-7446
Mounting Bracket

123367446
4900347-202420.03: RNCC: 2 | RNVC: 2
4900347-202420.03: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-12-310-9915
Access Cover

123109915
NGE 108-2000.005: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-135-9151
Butt Hinge

121359151
DIN7954-C50-MS-BK: RNCC: 2 | RNVC: 2
C50DIN7954MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-1228
Dust And Moisture Seal Protective Cover

123651228
14925: RNCC: 3 | RNVC: 2
0005461081: RNCC: 5 | RNVC: 2

30 Nov 2004

5340-12-322-3347
Angle Bracket

123223347
4608800937: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-385-4326
Angle Bracket

123854326
1821331013: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-324-0135
Pad Eye

123240135
605 160: RNCC: 3 | RNVC: 2

16 Jan 1991

Load More Results