What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 87 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 87 of 178

5340-12-154-4992

5340-12-044-0302

5340-12-349-0591
Mounting Plate

123490591
2300387-660561.001: RNCC: 2 | RNVC: 2
9908578: RNCC: 3 | RNVC: 2
2300387-660561.001: RNCC: 5 | RNVC: 9
9908578: RNCC: 5 | RNVC: 9

20 Sep 1999

5340-12-352-2849
Access Cover

123522849
5201579: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-12-300-2698
Mending Plate

123002698
A11A121110551: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-700-8921
Loop Clamp

127008921
2-6-8-4-1 CHIM.PAS. OST1 11125--: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-331-1945
Support Hook

123311945
226.30.780: RNCC: 3 | RNVC: 2
226.45.969: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-12-391-5062
Loop Clamp

123915062
S010039TAN686A: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-12-362-3067
Angle Bracket

123623067
J92228252-005: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-187-6894
Spring Tension Clip

121876894
PAN3089-20: RNCC: 3 | RNVC: 2

29 Apr 1981

5340-12-300-3442
Butt Hinge

123003442
6100128-11200.001: RNCC: 2 | RNVC: 2
4303610015: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-333-5059
Nonmetallic Bumper

123335059
1082410065: RNCC: 3 | RNVC: 2

27 Dec 1993

5340-12-359-0524
Mounting Bracket

123590524
3855400373: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-351-5006
Retaining Strap

123515006
4604702281: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-363-7854
Manual Control Handle

123637854
205-408: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-12-388-7931
Dust And Moisture Seal Protective Plug

123887931
2312-1022: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-310-9504
Turnbuckle

123109504
DIN82004-E16-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-E16-VERZINKT: RNCC: 3 | RNVC: 2
DIN82004-E16-ZN: RNCC: 3 | RNVC: 2
DIN82004-E16-VZK: RNCC: 5 | RNVC: 2

13 Jul 1987

5340-12-332-7994
Mounting Bracket

123327994
512222-8110.000: RNCC: 3 | RNVC: 2
512222-8110: RNCC: 5 | RNVC: 2

21 Sep 1993

5340-12-302-7622
Angle Bracket

123027622
6600117-150000.01: RNCC: 2 | RNVC: 2
6600117-150000.01: RNCC: 5 | RNVC: 9

29 Jan 1985

5340-12-702-6450
Loop Clamp

127026450
VG95211-ML-127026450: RNCC: 2 | RNVC: 2
987S50-42-15-BP: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-312-0160
Electrical-Mechanical Equipment Post

123120160
107375: RNCC: 3 | RNVC: 2
107 375: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-179-7045
Expansion Plug

121797045
81907200004: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-328-7340
Butt Hinge Leaf

123287340
6737510051: RNCC: 3 | RNVC: 2

20 Jun 1992

5340-12-309-0583
Shock Mount Pad

123090583
PG4005T072: RNCC: 3 | RNVC: 2
PG4005T072: RNCC: 5 | RNVC: 9

11 Dec 1986

5340-12-306-1332
Angle Bracket

123061332
3354292440: RNCC: 3 | RNVC: 2

30 Jan 1986

5340-12-010-8501

5340-12-372-4922
Mortise Lock

123724922
10005020: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-343-3330
Hand Crank

123433330
2996.73.94: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-12-196-0741
Cremone Bolt

121960741
409.039710: RNCC: 3 | RNVC: 2
409-039710: RNCC: 5 | RNVC: 2
409.039710: RNCC: 5 | RNVC: 9

25 May 1983

5340-12-369-3335
Helical Compression Spring Retainer

123693335
NO PRIMARY REF 12-369-3335: RNCC: 3 | RNVC: 2
7084163: RNCC: 5 | RNVC: 2

22 Jun 2006

5340-12-361-0373
Angle Bracket

123610373
J92227018-003: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-196-9981
Webbing Strap

121969981
4900059-112010.000.0: RNCC: 2 | RNVC: 2
01026-2-FE400SCHLAUF-LE800-01244: RNCC: 3 | RNVC: 2
4900059-112010.000.0: RNCC: 3 | RNVC: 2
4900059-112010.000.0: RNCC: 3 | RNVC: 2
4900059-112010.000.0: RNCC: 3 | RNVC: 2
221-00-353-3: RNCC: 3 | RNVC: 2
79018/SCHLAUFE/047-1100-400: RNCC: 3 | RNVC: 2
4900059-112010-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-50X400X800-C5/SCHL/D2: RNCC: 5 | RNVC: 9
221-00-353-3: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-701-3518
Rod End Connector

127013518
VG95211-ML-127013518: RNCC: 2 | RNVC: 2
5.12.5111.4410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3248
Angle Bracket

127033248
VG95211-ML-127033248: RNCC: 2 | RNVC: 2
5.12.7608.2080.05: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-359-9230
Mounting Bracket

123599230
250146-351200-03-0: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-317-5150
Double Angle Bracket

123175150
61710008: RNCC: 3 | RNVC: 2

14 Apr 1989

5340-12-345-4855
Retaining Strap

123454855
5800884-901161.002: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-12-378-8095
Dust And Moisture Seal Boot

123788095
738412: RNCC: 3 | RNVC: 2
90523155: RNCC: 5 | RNVC: 2

14 May 2009

5340-12-324-0654
Mounting Bracket

123240654
66.3579.430.02-A001: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-12-316-5512
Spring Holder

123165512
5183805: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-12-326-5089
Mounting Bracket

123265089
5802017-713200.01: RNCC: 2 | RNVC: 2
5802017-713200.01: RNCC: 3 | RNVC: 2

26 Sep 1991

5340-12-359-0547
Mounting Bracket

123590547
3876190040: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-387-8660
Mechanical Stop

123878660
7092963: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-305-2203
Hinge Torsion Bar

123052203
B-115910: RNCC: 3 | RNVC: 2
B-115910: RNCC: 5 | RNVC: 2

9 Oct 1985

5340-12-322-8269
Mounting Bracket

123228269
71.2.238.0004: RNCC: 2 | RNVC: 2
SP18952: RNCC: 3 | RNVC: 2
71.2.238.0004: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-050-4034

5340-12-162-7400
Hand Crank

121627400
81626416004: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-339-4505
Mounting Plate

123394505
4220 306 070: RNCC: 3 | RNVC: 2
4220306070: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-353-9329
Section Block Clamp

123539329
J29120253-001: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-301-9439
Helical Compression Spring Retainer

123019439
20-5010-029: RNCC: 3 | RNVC: 2

20 Nov 1984

5340-12-365-3231
Spring Loaded Cylinder Fastener

123653231
J53226155-405: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-190-3131
Access Cover

121903131
03434823: RNCC: 3 | RNVC: 2
3434823EE5091-18: RNCC: 5 | RNVC: 2
5177-18-04.42: RNCC: 5 | RNVC: 2
E5177-18-04.42: RNCC: 5 | RNVC: 2
434823: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-168-1207
Retaining Strap

121681207
4H050-3301: RNCC: 3 | RNVC: 2

18 Feb 1977

5340-12-328-9525
Pipe Hanger

123289525
2653-250020.00: RNCC: 2 | RNVC: 2
2653-250020.00: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-328-9519
Clamping Catch

123289519
2653-971030.00: RNCC: 2 | RNVC: 2
2653-971030.00: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-322-7671
Bow Handle

123227671
509475: RNCC: 3 | RNVC: 2
509475: RNCC: 5 | RNVC: 2
509475: RNCC: 5 | RNVC: 9

19 Sep 1990

5340-12-357-0089
Mounting Bracket

123570089
8812370540: RNCC: 2 | RNVC: 2
8812370540: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-335-0499
Double Angle Bracket

123350499
0048-221000A01B: RNCC: 2 | RNVC: 2
0048-221000A01B: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-337-9622
Nonmetallic Bumper

123379622
335.101905: RNCC: 3 | RNVC: 2
10.1905: RNCC: 5 | RNVC: 9

5 May 1995

5340-12-377-0074
Multiple Angle Bracket

123770074
504031291: RNCC: 3 | RNVC: 2

3 Dec 2008

5340-12-190-7508
Mending Plate

121907508
1054960: RNCC: 3 | RNVC: 2

10 Dec 1981

5340-12-358-0554
Access Cover

123580554
2300042-250650.005: RNCC: 2 | RNVC: 2
9940752: RNCC: 3 | RNVC: 2
2300042-250650.005: RNCC: 5 | RNVC: 2

6 Sep 2002

5340-12-324-7262
Double Angle Bracket

123247262
2500171-412000.01: RNCC: 2 | RNVC: 2
2500171-412000.01: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-12-372-5104
Access Cover

123725104
10021068: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-12-143-3988

5340-12-337-8947
Mounting Bracket

123378947
1602-101100.000.0: RNCC: 2 | RNVC: 2
1602-101100.000.0: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-12-702-5986
Loop Clamp

127025986
VG95211-ML-127025986: RNCC: 2 | RNVC: 2
5148A-48: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-172-4761
Dust And Moisture Seal Protective Cap

121724761
30-79350-0214: RNCC: 3 | RNVC: 2

23 Jan 1978

5340-12-159-8648
Pipe Bracket

121598648
RS1.25/15A: RNCC: 3 | RNVC: 2
4510015025: RNCC: 5 | RNVC: 2
RS1100-25-15A: RNCC: 5 | RNVC: 2
RS1100.25/15A: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-0791
Mending Plate

121950791
C72165-A421-C99: RNCC: 3 | RNVC: 2
71-01-001-095: RNCC: 5 | RNVC: 2
C72165A421C99: RNCC: 5 | RNVC: 2

11 Jan 1983

5340-12-199-8129
Lock-Release Lever

121998129
8100147-3000-10: RNCC: 2 | RNVC: 2

2 Jun 1984

5340-12-317-3776
Mending Plate

123173776
25704-289700.15.0: RNCC: 2 | RNVC: 2
84027-10.00.15.0: RNCC: 3 | RNVC: 2
84027-10.00.15.0: RNCC: 5 | RNVC: 9

4 Apr 1989

5340-12-349-9407
Mounting Plate

123499407
23176-150000.25.0: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-12-326-8356
Access Cover

123268356
1865-010510.03.0: RNCC: 3 | RNVC: 9

31 Oct 1991

5340-12-197-8305
Electrical-Mechanical Equipment Post

121978305
VG95148B14XM8X58-ST: RNCC: 2 | RNVC: 2
VG95148B14XM8X58-ST: RNCC: 3 | RNVC: 2
1218 8249: RNCC: 3 | RNVC: 2
12188249: RNCC: 5 | RNVC: 9
6-226-0-355-015-4: RNCC: 5 | RNVC: 9
6.226.0.355.015.4: RNCC: 5 | RNVC: 9

25 Nov 1983

5340-12-375-0739
Lock-Release Lever

123750739
SK971-182950.000.0: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-12-309-8951
Retaining Strap

123098951
769-460000.07.0: RNCC: 3 | RNVC: 2
769-460000.07.0: RNCC: 5 | RNVC: 9

16 Mar 1987

5340-12-702-4238
Angle Bracket

127024238
VG95211-ML-127024238: RNCC: 2 | RNVC: 2
5.12.7206.8010.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6055
Mounting Plate

127016055
VG95211-ML-127016055: RNCC: 2 | RNVC: 2
5.12.7001.8001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7305
Loop Clamp

127017305
VG95211-ML-127017305: RNCC: 2 | RNVC: 2
5.12.7607.8110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-7825
Mounting Bracket

123217825
54.0023.100.43: RNCC: 2 | RNVC: 2
54.0023.100.43: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-12-383-2797
Runner

123832797
82626300008: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-12-322-2765
Sealing Plug Assembly

123222765
7368 040 103: RNCC: 3 | RNVC: 2
7368040103: RNCC: 5 | RNVC: 9

7 Aug 1990

5340-12-090-6844

5340-12-375-5706
Mechanical Stop

123755706
S259M6077212: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-12-374-2501
Access Cover

123742501
L533M1247102: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-330-0437
Pad Eye

123300437
0707701: RNCC: 3 | RNVC: 2
8406145: RNCC: 5 | RNVC: 2

27 Oct 1992

5340-12-375-2675
Access Cover

123752675
04903890: RNCC: 3 | RNVC: 2
7420859843: RNCC: 5 | RNVC: 2

13 May 2008

5340-12-322-7377
Mounting Bracket

123227377
4618900814: RNCC: 3 | RNVC: 2

18 Sep 1990

5340-12-091-3323

5340-12-382-2824
Webbing Strap

123822824
4100036-150268.000: RNCC: 2 | RNVC: 2
4100036-150268.000: RNCC: 3 | RNVC: 2

1 Jun 2010

5340-12-702-1844
Mounting Bracket

127021844
VG95211-ML-127021844: RNCC: 2 | RNVC: 2
30.7206.1220: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-142-5458
Spring Loaded Cylinder Fastener

121425458
NO PRIMARY REF 12-142-5458: RNCC: 3 | RNVC: 2
B1-64: RNCC: 5 | RNVC: 9
6100008-75-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-0157
Nonmetallic Bumper

123340157
532104-4087.000: RNCC: 2 | RNVC: 2
532104-4087.000: RNCC: 3 | RNVC: 2
532104-4087.000: RNCC: 5 | RNVC: 9

9 Mar 1994

5340-12-185-2250
Mounting Bracket

121852250
106-220: RNCC: 3 | RNVC: 2

23 Sep 1980

5340-12-329-6593
Manual Control Handle

123296593
389 099: RNCC: 3 | RNVC: 2
271423: RNCC: 5 | RNVC: 2

15 Sep 1992

5340-12-328-9179
Nonmetallic Bumper

123289179
52.3109.808.00: RNCC: 2 | RNVC: 2
52.3109.808.00: RNCC: 3 | RNVC: 2
52.3109.808.00: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-314-3885
Mending Plate

123143885
024012601: RNCC: 3 | RNVC: 2

1 Jul 1988

5340-12-380-3499
Webbing Strap

123803499
4258600081: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-12-319-6535
Dust And Moisture Seal Protective Plug

123196535
435 013: RNCC: 3 | RNVC: 2
V731.06.095: RNCC: 5 | RNVC: 2
731.06.095: RNCC: 5 | RNVC: 2

23 Oct 1989

5340-12-195-7463
Retaining Band

121957463
00413700: RNCC: 3 | RNVC: 2

7 Apr 1983

5340-12-187-5461
Dust And Moisture Seal Protective Plug

121875461
900A18,5: RNCC: 3 | RNVC: 2
900018500: RNCC: 5 | RNVC: 2
A18,5: RNCC: 5 | RNVC: 2
A18,5GPN900: RNCC: 5 | RNVC: 2
GPN900,18,5: RNCC: 5 | RNVC: 2
GPN900A18,5: RNCC: 5 | RNVC: 2
GPN900A18-5: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-187-9647
Extension Drawer Slide

121879647
75C10.35-6: RNCC: 3 | RNVC: 2
75C10.35.6: RNCC: 5 | RNVC: 2

20 May 1981

5340-12-322-9021
Recess Handle

123229021
58.4701.0006: RNCC: 3 | RNVC: 2
1367435: RNCC: 5 | RNVC: 2
2-4701-4: RNCC: 5 | RNVC: 2
63.4702.06.42: RNCC: 5 | RNVC: 2

5 Oct 1990

5340-12-388-0193
Mending Plate

123880193
5840981826: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-180-4834
Sicherheits Schlosz

121804834
3606472: RNCC: 3 | RNVC: 2
SL472: RNCC: 5 | RNVC: 2

12 Sep 1979

5340-12-177-0152
Angle Bracket

121770152
51056400013: RNCC: 3 | RNVC: 2

3 Jan 1979

5340-12-128-6788

5340-12-381-3998
Butt Hinge

123813998
1110-SU148: RNCC: 3 | RNVC: 2
10113570: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-12-317-4816
Rod End Clevis

123174816
1741113A1401: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-12-134-3771
Shimmy Damper

121343771
6186258: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-339-0528
Mounting Plate

123390528
4607510014: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-354-1451
Block Clamp

123541451
JN0093DD34: RNCC: 3 | RNVC: 2

11 Jun 2001

5340-12-125-7637

5340-12-021-7895

5340-12-350-7560
Mending Plate

123507560
105-735227: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-343-9041
Access Cover

123439041
03824101: RNCC: 3 | RNVC: 2
03824100: RNCC: 5 | RNVC: 2
03824100.534: RNCC: 5 | RNVC: 2
03824101.534: RNCC: 5 | RNVC: 2

12 Aug 1997

5340-12-163-9162
Mending Plate

121639162
HP921: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-3056
Nonmetallic Bumper

123503056
11227909901: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-12-183-9047
Loop Clamp

121839047
2101033: RNCC: 3 | RNVC: 9

29 May 1980

5340-12-355-3886
Rod End Clevis

123553886
02.1201.02.12: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-12-325-7179
Resilient Mount

123257179
3660300903: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-350-7281
Angle Bracket

123507281
64416587: RNCC: 3 | RNVC: 2

11 May 2000

5340-12-360-9947
Mounting Bracket

123609947
0853 9350.006: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-368-9523
Angle Bracket

123689523
2341760: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-360-3006
Access Cover

123603006
0009620249: RNCC: 3 | RNVC: 2
0009620249: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-308-8330
Access Cover

123088330
1281-18300.04: RNCC: 2 | RNVC: 2
159658: RNCC: 3 | RNVC: 2
1281-18300.04: RNCC: 5 | RNVC: 2

21 Nov 1986

5340-12-137-9556
Butt Hinge

121379556
DIN7955-A20-ST-BK: RNCC: 2 | RNVC: 2
SA20DIN7955: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-337-9415
Resilient Mount

123379415
DIN95363-B15X30-M4X12-NR55ST: RNCC: 2 | RNVC: 2
510015-M4X12.NR55.ST: RNCC: 5 | RNVC: 2
C249-A15-C78: RNCC: 5 | RNVC: 2
VG95363-B15X30-M4X12-NR55ST: RNCC: 5 | RNVC: 9

4 May 1995

5340-12-342-4761
Mounting Plate

123424761
A22-0001: RNCC: 3 | RNVC: 2
ZE-A22-0001: RNCC: 5 | RNVC: 9

17 Feb 1997

5340-12-343-5517
Mounting Plate

123435517
5017-075: RNCC: 3 | RNVC: 2
F300 0T 022 4369: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-310-3508
Flush Catch Claw

123103508
38012-0112.02: RNCC: 2 | RNVC: 2
38012-0112.02: RNCC: 3 | RNVC: 2
38012-0112.02: RNCC: 5 | RNVC: 9

13 May 1987

5340-12-306-8203
Loop Clamp

123068203
DIN3016-1-A1-25X15-W5: RNCC: 2 | RNVC: 2
RS1.25/15-W5: RNCC: 3 | RNVC: 2
DIN3016-A1-25X15-W5: RNCC: 3 | RNVC: 2
405.256: RNCC: 5 | RNVC: 2
4110715025: RNCC: 5 | RNVC: 2
RS1.25/15-1.4571: RNCC: 5 | RNVC: 2
DIN3016-A1-25X15-W5: RNCC: 5 | RNVC: 9
VG95931-A25X15-W5: RNCC: 5 | RNVC: 9

7 Apr 1986

5340-12-177-6628
Mounting Bracket

121776628
710 009 0Y4: RNCC: 3 | RNVC: 9
F0107-03-01: RNCC: 5 | RNVC: 9
F0107-03-01: RNCC: 5 | RNVC: 9

12 Feb 1979

5340-12-312-5082
Mending Plate

123125082
P-085017-015: RNCC: 3 | RNVC: 2
P085017-015: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-391-4235
Retaining Strap

123914235
I010078: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-338-1760
Mounting Plate

123381760
243.2771: RNCC: 3 | RNVC: 2

31 May 1995

5340-12-391-9052
Access Cover

123919052
DF 106 163 AR: RNCC: 3 | RNVC: 2
DF 106 163 AR: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-12-367-6225
Dust And Moisture Seal Protective Cover

123676225
701863787: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-12-366-7449
Butt Hinge

123667449
4500-020398: RNCC: 3 | RNVC: 2
0.110.001.002: RNCC: 5 | RNVC: 2

2 Jun 2005

5340-12-312-6733
Electrical-Mechanical Equipment Post

123126733
VG95148B5XM3X25-2.0380.30-E2A: RNCC: 2 | RNVC: 2
VG95148B5XM3X25-2.0380.30-E2A: RNCC: 3 | RNVC: 2
ENMET 2-25: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-12-701-6075
Angle Bracket

127016075
VG95211-ML-127016075: RNCC: 2 | RNVC: 2
5.12.7003.1081.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-351-6120
Loop Clamp

123516120
DIN71555-42,3-A4C: RNCC: 2 | RNVC: 2
RS42,3 DIN71555: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-12-358-1012
Angle Bracket

123581012
4038R-100000.014.0: RNCC: 2 | RNVC: 2
4038R-100000.014.0: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-12-343-0181
Nonmetallic Bumper

123430181
5004-050: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-175-8271
Leather Strap

121758271
23111-4162-01: RNCC: 2 | RNVC: 2
23111-4162-01: RNCC: 5 | RNVC: 2
23111-4162-01: RNCC: 5 | RNVC: 9

23 Oct 1978

5340-12-391-7486
Expansion Plug

123917486
9069970120: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-12-027-4883

5340-12-377-3322
Dust And Moisture Seal Protective Cap

123773322
41042446: RNCC: 3 | RNVC: 2

9 Jan 2009

5340-12-322-8106
Spring Holder

123228106
8470 040 203: RNCC: 3 | RNVC: 2
8470040203: RNCC: 5 | RNVC: 2
8470040203: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-305-4434
Dust And Moisture Seal Protective Plug

123054434
2819812135: RNCC: 3 | RNVC: 2
2819812135: RNCC: 5 | RNVC: 2

7 Nov 1985

5340-12-183-8105
Nonmetallic Bumper

121838105
211501191: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-317-1003
Dust And Moisture Seal Protective Cap-Plug Set

123171003
9121750220: RNCC: 3 | RNVC: 2

10 Mar 1989

5340-12-392-6520
Dust And Moisture Seal Protective Cover

123926520
M2917920520600: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-369-0334
Retaining Strap

123690334
306-496: RNCC: 3 | RNVC: 2

16 May 2006

5340-12-393-6624
Mounting Bracket

123936624
056243: RNCC: 2 | RNVC: 2
056243: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-382-7188
Mounting Bracket

123827188
806276243: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-12-168-3017
Loop Clamp

121683017
LN9491B19: RNCC: 2 | RNVC: 2

7 Mar 1977

5340-12-331-2994
Rod End Clevis

123312994
1332121001: RNCC: 3 | RNVC: 2

20 Apr 1993

5340-12-388-7446
Strap Fastener Loop

123887446
DIN5293-28-LA: RNCC: 2 | RNVC: 2
28DIN5293-LA: RNCC: 5 | RNVC: 2

18 Apr 2012

5340-12-308-7238
Electrical-Mechanical Equipment Post

123087238
20-4250-154: RNCC: 3 | RNVC: 2

11 Nov 1986

5340-12-196-8331
Support Hook

121968331
588.70-510100-010: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-165-3210
Retaining Band

121653210
307.161-10000.22: RNCC: 3 | RNVC: 2
0307161-10000-22: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-180-6538
Platte

121806538
81664402079: RNCC: 3 | RNVC: 2

24 Sep 1979

5340-12-180-3127
Nonmetallic Bumper

121803127
2518043EE5038-42: RNCC: 3 | RNVC: 2
0318048: RNCC: 3 | RNVC: 2
02518043: RNCC: 5 | RNVC: 2
2518043EE5038-42: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-319-6954
Metal Runner

123196954
409035063: RNCC: 3 | RNVC: 2
409.035 063: RNCC: 5 | RNVC: 2

26 Oct 1989

5340-12-368-6959
Dust And Moisture Seal Protective Plug

123686959
13.0101.7011: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-12-164-3871
Door Handle

121643871
81626416012: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-393-3592
Manual Control Lever

123933592
06390-1081: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-154-5594
Spring Tension Clip

121545594
W4125746000B2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-197-0520
Hinge Torsion Bar

121970520
65585: RNCC: 3 | RNVC: 2
16921: RNCC: 5 | RNVC: 2

14 Sep 1983

5340-12-181-1974
Electrical-Mechanical Equipment Post

121811974
072770: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-044-0579

5340-12-320-7039
Electrical-Mechanical Equipment Post

123207039
CF 348 062: RNCC: 2 | RNVC: 2
CF 348 062: RNCC: 3 | RNVC: 2
CF 348 062: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-357-2083
Mechanical Stop

123572083
331313: RNCC: 3 | RNVC: 2

22 May 2002

5340-12-172-8894
Dust And Moisture Seal Protective Plug

121728894
049103491: RNCC: 3 | RNVC: 2

2 Mar 1978

5340-12-390-0394
Angle Bracket

123900394
313439: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-179-5853
Dust And Moisture Seal Protective Plug

121795853
049109273: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-153-1940
Handle Grip

121531940
0260017000: RNCC: 3 | RNVC: 2
S000260017000000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-9244
Manual Control Handle

123589244
0009971577: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-165-9513
Friction Catch Stud

121659513
K1610: RNCC: 3 | RNVC: 9
K1610: RNCC: 5 | RNVC: 2
K1610: RNCC: 5 | RNVC: 9

23 Jul 1976

5340-12-353-4260
Spacing Threaded Standoff

123534260
52.6871.280.01: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-147-5778

5340-12-311-2718
Mending Plate

123112718
1216875: RNCC: 3 | RNVC: 2
4300.165.00.00.021: RNCC: 5 | RNVC: 2
4300.165.00/21: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-394-0070
Butt Hinge

123940070
E10236-R9905-C322: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-12-388-0316
Handwheel

123880316
F1.1697-00-03-10.00-08: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-12-199-7694
Retaining Strap

121997694
0335 9331: RNCC: 3 | RNVC: 2
03359331: RNCC: 5 | RNVC: 2
3359331EE0144-20: RNCC: 5 | RNVC: 2

29 May 1984

5340-12-310-4353
Vent Plug

123104353
588.90-211031-000: RNCC: 3 | RNVC: 2

21 May 1987

5340-12-365-5785
Angle Bracket

123655785
J21520085-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-391-7249
Access Cover

123917249
I006709TAN686A: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-12-198-7463
Metal Runner

121987463
4900123-5400.03: RNCC: 2 | RNVC: 2
4900123-5400.03: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-379-9754
Manual Control Handle

123799754
58290267: RNCC: 3 | RNVC: 2
CV169187: RNCC: 5 | RNVC: 2
58290267: RNCC: 5 | RNVC: 2

16 Sep 2009

5340-12-388-8823
Access Cover

123888823
5820150309: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-199-6822
Nonmetallic Bumper

121996822
351271301461: RNCC: 3 | RNVC: 2
35127130146: RNCC: 5 | RNVC: 2

22 May 1984

5340-12-361-9794
Rod End Clevis

123619794
117-84445: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-359-5279
Rod End Clevis

123595279
EL670.01.019: RNCC: 3 | RNVC: 2

13 Feb 2003

5340-12-308-6377
Dust And Moisture Seal Protective Cap

123086377
604813: RNCC: 3 | RNVC: 2
41421-05G1-005: RNCC: 5 | RNVC: 2

30 Oct 1986

5340-12-353-9326
Section Block Clamp

123539326
J29120248-001: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-168-5705
Helical Compression Spring Retainer

121685705
1000025-410000-16: RNCC: 3 | RNVC: 2
1000025-410000.16: RNCC: 3 | RNVC: 2
1000025-410000-16: RNCC: 5 | RNVC: 9
1000025-410000.16: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-365-2241
Bridge Clamp

123652241
2300397-180000.060.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-702-6021
Loop Clamp

127026021
VG95211-ML-127026021: RNCC: 2 | RNVC: 2
5159A-12-2: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-369-3129
Spring Loaded Cylinder Fastener

123693129
2300515-186230.005.0: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-12-344-7523
Dust And Moisture Seal Protective Plug

123447523
37120802: RNCC: 3 | RNVC: 2

4 Dec 1997

5340-12-135-6526

5340-12-387-0132
Dust And Moisture Seal Protective Cap

123870132
31112690: RNCC: 3 | RNVC: 2
CV190672: RNCC: 5 | RNVC: 2
31112689: RNCC: 5 | RNVC: 2

26 Oct 2011

5340-12-316-3690
Angle Bracket

123163690
160-01/82113: RNCC: 3 | RNVC: 2
160-01/82113: RNCC: 5 | RNVC: 9

12 Jan 1989

5340-12-194-3911
Metal Runner

121943911
66.3505.210.03-A001: RNCC: 3 | RNVC: 2
582568: RNCC: 5 | RNVC: 2
66-3505-210-03A001: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-162-5010
Handle Grip

121625010
100356-218200.06: RNCC: 2 | RNVC: 2
100356-218200.06: RNCC: 3 | RNVC: 2
100356-218200-06: RNCC: 5 | RNVC: 9
100356-218200-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-346-6188
Mounting Plate

123466188
5052-180204001: RNCC: 3 | RNVC: 2
5052-18 02 04 001: RNCC: 5 | RNVC: 2

17 Aug 1998

5340-12-391-3473
Spacing Threaded Standoff

123913473
82920100003: RNCC: 3 | RNVC: 2
82.92010-0003: RNCC: 5 | RNVC: 2

7 Mar 2013

5340-12-323-7296
Retaining Strap

123237296
2211224701: RNCC: 3 | RNVC: 2
5800600-0100-002: RNCC: 5 | RNVC: 2
5800600-0100.002: RNCC: 5 | RNVC: 2
22112 24701: RNCC: 5 | RNVC: 9

12 Dec 1990

5340-12-319-5331
Angle Bracket

123195331
5802006-202100.01: RNCC: 2 | RNVC: 2
5802006-202100.01: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-155-1109
Retaining Strap

121551109
160-24622-19: RNCC: 3 | RNVC: 2
160-24622-19: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-1946
Double Angle Bracket

123051946
5801763-211000.001: RNCC: 2 | RNVC: 2
5801763-211000.001: RNCC: 3 | RNVC: 2
5801763-211000.001: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-027-6236

5340-12-189-5235
Loop Clamp

121895235
PAN4231BBD4220: RNCC: 3 | RNVC: 2

5 Oct 1981

5340-12-335-0502
Mounting Bracket

123350502
0048-201300A00C: RNCC: 2 | RNVC: 2
0048-201300A00C: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-382-4582
Dust And Moisture Seal Protective Plug

123824582
GPN320GL13: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-12-192-6470
Retaining Strap

121926470
3149950142: RNCC: 3 | RNVC: 2

12 May 1982

5340-12-333-3327
Access Cover

123333327
10 0000 809: RNCC: 2 | RNVC: 2
10 0000 809: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-12-316-9000
Door Handle

123169000
DIN81317-A-MS1-M: RNCC: 2 | RNVC: 2
4410 MMNI: RNCC: 3 | RNVC: 2
4410 MS: RNCC: 5 | RNVC: 2
63120030: RNCC: 5 | RNVC: 9

22 Feb 1989

5340-12-358-7367
Buckle

123587367
P20599NM: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-360-6777
Clamping Catch

123606777
505.099A: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-12-370-4960
Angle Bracket

123704960
4636180014: RNCC: 3 | RNVC: 2
463 618 00 14: RNCC: 5 | RNVC: 2

14 Nov 2006

5340-12-346-9321
Mounting Bracket

123469321
51.420.00106.000: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-12-346-6431
Dust And Moisture Seal Protective Cap

123466431
53.1622.549.00: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-12-381-6355
Mounting Plate

123816355
504019213: RNCC: 3 | RNVC: 2

11 Mar 2010

5340-12-349-7832
Retaining Strap

123497832
T290M2202268: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-338-8794
Metallic Bumper

123388794
2300002-181041: RNCC: 2 | RNVC: 2
2300002-181041: RNCC: 3 | RNVC: 2
2300002-181041: RNCC: 5 | RNVC: 9

5 Sep 1995

5340-12-311-0518
Mending Plate

123110518
5801357-1750.01: RNCC: 2 | RNVC: 2
5801357-1750.01: RNCC: 3 | RNVC: 2
5801357-1750.01: RNCC: 5 | RNVC: 9

22 Jul 1987

5340-12-142-0911
Ring

121420911
PL-KK12035 PA124S: RNCC: 3 | RNVC: 2
0009972490: RNCC: 5 | RNVC: 2
20931074: RNCC: 5 | RNVC: 2
12035: RNCC: 5 | RNVC: 2
20931074: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-0639
Mounting Bracket

123650639
4603101809: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-372-4121
Dust And Moisture Seal Protective Plug

123724121
11220252200: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-372-9473
Angle Bracket

123729473
L632M1006101: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-12-356-4619
Dust And Moisture Seal Boot

123564619
J94330253-001: RNCC: 3 | RNVC: 2
7669419: RNCC: 5 | RNVC: 2

4 Mar 2002

5340-12-196-8553
Dust And Moisture Seal Protective Cap

121968553
025-8636-020: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-360-1411
Dust And Moisture Seal Protective Cap

123601411
280ER12: RNCC: 3 | RNVC: 2
GPN280ER12: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-354-3080
Mechanical Stop

123543080
4NT2392269: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-12-393-6808
Mounting Plate

123936808
06.66010-5601: RNCC: 3 | RNVC: 2
06.66010-5601: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-313-0019
Mending Plate

123130019
4110344904: RNCC: 3 | RNVC: 2
81.54117.0008: RNCC: 5 | RNVC: 2
81541170008: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-333-8933
Spacing Threaded Standoff

123338933
52.9352.101.88: RNCC: 3 | RNVC: 2

22 Feb 1994

5340-12-360-4229
Bow Handle

123604229
A1Z10273086: RNCC: 3 | RNVC: 2
10273086: RNCC: 5 | RNVC: 2

20 May 2003

5340-12-328-4591
Casement Fastener

123284591
0019885842: RNCC: 3 | RNVC: 2
001 988 58 42: RNCC: 5 | RNVC: 2

21 May 1992

5340-12-346-3721
Access Cover

123463721
8655.2005: RNCC: 3 | RNVC: 2

17 Jul 1998

5340-12-702-1970
Mounting Bracket

127021970
VG95211-ML-127021970: RNCC: 2 | RNVC: 2
30.7210.310: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-385-2381
Mounting Bracket

123852381
F1.1781-40-01-55.00-00: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-325-1728
Access Cover

123251728
12791-120000.033: RNCC: 2 | RNVC: 2
009-039.120-033: RNCC: 3 | RNVC: 2
12791-120000.033: RNCC: 5 | RNVC: 9

13 May 1991

5340-12-342-7412
Mounting Bracket

123427412
1202 8531: RNCC: 3 | RNVC: 2
1202 8531KZ0111-48: RNCC: 5 | RNVC: 2
12028532UD0111-48: RNCC: 5 | RNVC: 2
1202 8532: RNCC: 5 | RNVC: 9
3-601-9-634-002-5: RNCC: 5 | RNVC: 9
3.601.9.634.002.5: RNCC: 5 | RNVC: 9

24 Mar 1997

5340-12-392-5571
Angle Bracket

123925571
4100038-400250.010.0: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-12-382-3801
Lock Key

123823801
09304241-0: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-176-3216
Loop Clamp

121763216
PAN4263-06: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-344-8259
Door Button

123448259
0002001226001: RNCC: 3 | RNVC: 2
HESTAL 691-B: RNCC: 5 | RNVC: 2
81971220020: RNCC: 5 | RNVC: 2

15 Dec 1997

5340-12-305-3803
Angle Bracket

123053803
C-172963: RNCC: 3 | RNVC: 2
E-227959: RNCC: 5 | RNVC: 2
E-227959: RNCC: 5 | RNVC: 2

29 Oct 1985

5340-12-186-0421
Expansion Shield

121860421
7-35: RNCC: 3 | RNVC: 9
00110008: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-371-9850
Section Block Clamp

123719850
01TC35590: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-12-341-1776
Plain Solid Disk

123411776
052193: RNCC: 3 | RNVC: 2

6 Aug 1996

5340-12-340-8847
Lever Bracket

123408847
281843456: RNCC: 3 | RNVC: 2

27 Jun 1996

5340-12-323-2762
Handle Grip

123232762
1483231003: RNCC: 3 | RNVC: 2
42208550: RNCC: 5 | RNVC: 2

9 Nov 1990

5340-12-348-6767
Mounting Bracket

123486767
2300387-660511.000: RNCC: 2 | RNVC: 2
9908606: RNCC: 3 | RNVC: 2
2300387-660511.000: RNCC: 5 | RNVC: 9
9908606: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-317-5149
Nonmetallic Bumper

123175149
21710002: RNCC: 3 | RNVC: 2

14 Apr 1989

5340-12-133-4048

5340-12-354-0864
Escutcheon Plate

123540864
1247.002: RNCC: 3 | RNVC: 2
100.104.1247.002: RNCC: 5 | RNVC: 2

1 Jun 2001

5340-12-388-4403
Section Block Clamp

123884403
5849953768: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-313-9092
Loop Clamp

123139092
LB2 10UL: RNCC: 3 | RNVC: 2
LB2/10-UL: RNCC: 5 | RNVC: 2
LB2 10UL: RNCC: 5 | RNVC: 2

19 May 1988

5340-12-319-1330
Spring Loaded Cylinder Fastener

123191330
2654-332500.00: RNCC: 2 | RNVC: 2
2654-332500.00: RNCC: 3 | RNVC: 2
679-02040000: RNCC: 5 | RNVC: 9
2654-332 500.00: RNCC: 5 | RNVC: 9
679-02040000: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-12-338-3429
Double Angle Bracket

123383429
1854601: RNCC: 3 | RNVC: 2

26 Jun 1995

5340-12-337-8908
Mounting Bracket

123378908
2300088-713208.00: RNCC: 2 | RNVC: 2
9851227: RNCC: 3 | RNVC: 2
2300088-713208.00: RNCC: 5 | RNVC: 9
9851227: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-12-314-4315
Mounting Bracket

123144315
6214911741: RNCC: 3 | RNVC: 2
621 491 17 41: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-094-4039

5340-12-325-7105
Access Cover

123257105
70304: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-350-6787
Mounting Bracket

123506787
2300387-413007.000: RNCC: 2 | RNVC: 2
2300387-413007.000: RNCC: 3 | RNVC: 2
9906862: RNCC: 5 | RNVC: 2
2300387-413007.000: RNCC: 5 | RNVC: 9
9906862: RNCC: 5 | RNVC: 9

4 May 2000

5340-12-091-7280

5340-12-310-0482
Nonmetallic Bumper

123100482
65.7111.660.05-A001: RNCC: 3 | RNVC: 2
368670: RNCC: 5 | RNVC: 2

1 Apr 1987

5340-12-331-6230
Spacing Threaded Standoff

123316230
6268074: RNCC: 3 | RNVC: 2

1 Jun 1993

5340-12-379-9752
Angle Bracket

123799752
58190496: RNCC: 3 | RNVC: 2
CV169142: RNCC: 5 | RNVC: 2
58190496: RNCC: 5 | RNVC: 2

16 Sep 2009

5340-12-300-3498
Pad Eye

123003498
3096750040: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-364-2046
Mounting Bracket

123642046
4373102309: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-378-3229
Angle Bracket

123783229
41033478: RNCC: 3 | RNVC: 2

27 Mar 2009

5340-12-369-7820
Multiple Angle Bracket

123697820
CBD45109P01: RNCC: 3 | RNVC: 2

16 Aug 2006

5340-12-353-1482
Mounting Bracket

123531482
5611532740: RNCC: 3 | RNVC: 2
561 153 27 40: RNCC: 5 | RNVC: 2

2 Feb 2001

5340-12-359-5104
Metallic Bumper

123595104
54.0130.400.00: RNCC: 3 | RNVC: 2
54.0130.400.00: RNCC: 5 | RNVC: 2

12 Feb 2003

5340-12-352-7126
Access Cover

123527126
64416343: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-353-8778
Shimmy Damper

123538778
1023103000: RNCC: 3 | RNVC: 2
ART.NO.1023103000: RNCC: 5 | RNVC: 9

16 May 2001

5340-12-356-8842
Nut And Bolt Locking Plate

123568842
09439180: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-320-2951
Flare Lock Fastener

123202951
0009904292: RNCC: 3 | RNVC: 2

28 Dec 1989

5340-12-346-1616
Mounting Bracket

123461616
105-60512: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-091-2534

5340-12-156-9001

5340-12-344-3777
Lock-Release Lever

123443777
107C530P1GAF: RNCC: 3 | RNVC: 2
107C530P1GAF: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-330-0105
Helical Compression Spring Seat

123300105
2420328034: RNCC: 3 | RNVC: 2
0130 9327: RNCC: 5 | RNVC: 2
01309327EY0148-17: RNCC: 5 | RNVC: 2
2420328034: RNCC: 5 | RNVC: 2

21 Oct 1992

5340-12-330-0956
Luggage Handle

123300956
591260-8130.000: RNCC: 2 | RNVC: 2
591260-8130.000: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-12-315-2519
Mending Plate

123152519
3816104625: RNCC: 3 | RNVC: 2
381 610 46 25: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-354-1213
Access Cover

123541213
00993501: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-383-8841
Casement Fastener

123838841
65000460: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-317-2972
Bow Handle

123172972
3148150336: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-326-6007
Access Cover

123266007
30-92101-0149: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-12-333-2021
Rod End Clevis

123332021
00009191800: RNCC: 3 | RNVC: 9
KW.10.300-4010: RNCC: 5 | RNVC: 9
0919180: RNCC: 5 | RNVC: 9

9 Nov 1993

5340-12-349-7847
Angle Bracket

123497847
FAST-201000.02: RNCC: 2 | RNVC: 2
FAST-201000.02: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-152-2975
Loop Clamp

121522975
5800334-6000-295: RNCC: 3 | RNVC: 2
5800334-6000-295: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-7574
Plug Button

127027574
50-06100920025: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-178-1266
Loop Clamp

121781266
06678400107: RNCC: 3 | RNVC: 2
06.67840-0107: RNCC: 5 | RNVC: 2
06.67840-0107: RNCC: 5 | RNVC: 2
MAN194 A11: RNCC: 5 | RNVC: 2
A11MAN194: RNCC: 5 | RNVC: 9

22 Mar 1979

5340-12-313-6956
Elastic Cord Assembly

123136956
VF4184-00600-042: RNCC: 3 | RNVC: 2
VF4184-00600-042: RNCC: 5 | RNVC: 2

27 Apr 1988

5340-12-154-7187
Turnbuckle

121547187
MS-SP8602-M6: RNCC: 3 | RNVC: 2
M6 SPANNSCHRAUBE NR6611: RNCC: 5 | RNVC: 2
M6 WANTENSPANNER NR1156: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-6142
Multiple Eye Pad

123586142
481-200412: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-317-1858
Nonmetallic Bumper

123171858
136-041.01-035: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-702-6400
Mounting Bracket

127026400
VG95211-ML-127026400: RNCC: 2 | RNVC: 2
84.7220.740: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-7330
Mounting Bracket

123547330
9997010-017100.01: RNCC: 3 | RNVC: 2

21 Aug 2001

5340-12-306-9352
Shimmy Damper

123069352
050768: RNCC: 3 | RNVC: 2
03-10-200-129-0800: RNCC: 5 | RNVC: 2
85-692-9237: RNCC: 6 | RNVC: 9

17 Apr 1986

5340-12-357-0291
Dust And Moisture Seal Protective Plug

123570291
15,2MMN328: RNCC: 3 | RNVC: 2
700328000213: RNCC: 5 | RNVC: 9

25 Apr 2002

5340-12-702-4190
Mounting Bracket

127024190
VG95211-ML-127024190: RNCC: 2 | RNVC: 2
5.12.7070.1130.09: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-194-4081
Nonmetallic Bumper

121944081
A-616782-009: RNCC: 3 | RNVC: 2
A616782-009: RNCC: 5 | RNVC: 2

3 Nov 1982

5340-12-167-1041
Loop Clamp

121671041
RS1.25/12-3.1364T42: RNCC: 3 | RNVC: 2
LRS1100-25-12AL: RNCC: 5 | RNVC: 2
RS1100-25-12-3-1364-5: RNCC: 5 | RNVC: 2
RS1100.25/12-3.1364T42: RNCC: 5 | RNVC: 2

23 Nov 1976

5340-12-161-6850
Mending Plate

121616850
100332-019100.19: RNCC: 2 | RNVC: 2
100332-019100.19: RNCC: 3 | RNVC: 2
100332-90100-19: RNCC: 5 | RNVC: 2
100332-90100.19: RNCC: 5 | RNVC: 2
100332-90100-19: RNCC: 5 | RNVC: 9
100332-90100.19: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-167-3492
Angle Bracket

121673492
100375-18700.05: RNCC: 2 | RNVC: 2
100375-18700.05: RNCC: 5 | RNVC: 2
100375-18700-05: RNCC: 5 | RNVC: 2
100375-18700-05: RNCC: 5 | RNVC: 9

16 Dec 1976

5340-12-164-5696
Retaining Strap

121645696
23290-241000.005: RNCC: 2 | RNVC: 2
23290-241000.005: RNCC: 3 | RNVC: 2
23290-241000-005: RNCC: 5 | RNVC: 9
23290-241000.005: RNCC: 5 | RNVC: 9
23290-241000.005: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-9601
Webbing Strap

121779601
81968024010: RNCC: 3 | RNVC: 2
000-F2-20X2,0X300-PE-RAL0631: RNCC: 6 | RNVC: 9

9 Mar 1979

5340-12-173-0808
Detent Plunger

121730808
5800573-1112-044: RNCC: 3 | RNVC: 2
5800573-1112.044: RNCC: 5 | RNVC: 2
C42326-A20-C37: RNCC: 5 | RNVC: 2
C42326A20C37: RNCC: 5 | RNVC: 2

20 Mar 1978

5340-12-349-4489
Support Hook

123494489
513419-0106.000: RNCC: 3 | RNVC: 2
513419-0106.000: RNCC: 5 | RNVC: 2
513419-0106.000: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-12-378-4012
Access Cover

123784012
0902092-01: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-155-4078
Rod End Clevis

121554078
160-62075-02: RNCC: 3 | RNVC: 2
160-62075-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-9180
Corner Brace

123539180
209489: RNCC: 3 | RNVC: 2
A1-097-287: RNCC: 5 | RNVC: 2

17 May 2001

5340-12-356-7528
Angle Bracket

123567528
523-061102.01.0: RNCC: 2 | RNVC: 2
523-061102.01.0: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-141-7602
Loop Clamp

121417602
DIN3016-2-G1-170X25-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-170X25-W1-2: RNCC: 3 | RNVC: 2
SP170/25SK: RNCC: 3 | RNVC: 2
2332-804-009: RNCC: 5 | RNVC: 2
1610000170: RNCC: 5 | RNVC: 2
SP170-25SK: RNCC: 5 | RNVC: 2
VG95931G170X25W1: RNCC: 5 | RNVC: 9
DIN3016-G1-170X25-W1-2: RNCC: 5 | RNVC: 9
VG95931-G170X25-W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-8451
Access Door

123268451
272.346 276: RNCC: 2 | RNVC: 2
272.346.276: RNCC: 3 | RNVC: 2
8708065-101: RNCC: 5 | RNVC: 9
272.346 276: RNCC: 5 | RNVC: 9

4 Nov 1991

5340-12-340-7337
Clamping Catch

123407337
9840046600: RNCC: 3 | RNVC: 2
80 10 00 76: RNCC: 5 | RNVC: 2
8010007600: RNCC: 5 | RNVC: 2
98400466: RNCC: 5 | RNVC: 2

31 May 1996

5340-12-351-3844
Runner

123513844
10063-312500: RNCC: 3 | RNVC: 2
10063-312500: RNCC: 5 | RNVC: 9

20 Jul 2000

5340-12-191-5540
Spring Loaded Cylinder Fastener

121915540
PAN5115: RNCC: 3 | RNVC: 2

10 Feb 1982

5340-12-352-2265
Angle Bracket

123522265
5062032940: RNCC: 3 | RNVC: 2
506 203 29 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-352-2143
Angle Bracket

123522143
T531M4521235: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-361-9776
Mounting Plate

123619776
1030014-971000.019.0: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-319-2126
Access Cover

123192126
6530.005.4: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-701-9433
Rod End Clevis

127019433
5.12.0430.4025.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-330-7234
Helical Compression Spring Seat

123307234
4B46141: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-12-317-1818
Metal Runner

123171818
4606925127: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-022-3164

5340-12-365-5879
Angle Bracket

123655879
J32320050-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-163-9813
Retaining Band

121639813
TK6092-0100: RNCC: 3 | RNVC: 2
2500006-0100: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-9792
Manuelle Bed Hebel

5340-12-347-9214
Befestigun Schelle

5340-12-359-9665
Spring Loaded Cylinder Fastener

123599665
GN613-10-AK-NI: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-702-8988
Mounting Plate

127028988
25-08301008904: RNCC: 2 | RNVC: 2

16 Jul 1996

5340-12-303-4895
Mending Plate

123034895
6100109-1200: RNCC: 2 | RNVC: 2
6100109-1200: RNCC: 3 | RNVC: 2

27 Mar 1985

5340-12-154-8332
Loop Clamp

121548332
51-2081-250-13: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-9318
Access Cover

123289318
2653-090330.17: RNCC: 2 | RNVC: 2
2653-090330.17: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-177-8177
Retaining Strap

121778177
DIN3016-1-F1-10X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-10X20-W1-2: RNCC: 3 | RNVC: 2
RSGU2.10/20: RNCC: 3 | RNVC: 2
9420020010: RNCC: 5 | RNVC: 2
RSGU1200-10-20: RNCC: 5 | RNVC: 2
RSGU1200.10/20: RNCC: 5 | RNVC: 2
VG95931-F10X20-W1: RNCC: 5 | RNVC: 9
VG95931F10X20W1: RNCC: 5 | RNVC: 9
DIN3016-F1-10X20-W1-2: RNCC: 5 | RNVC: 9

28 Feb 1979

5340-12-310-8844
Angle Bracket

123108844
A-295031-403: RNCC: 3 | RNVC: 2
A295031-403: RNCC: 5 | RNVC: 2

3 Jul 1987

5340-12-173-1782
Loop Clamp

121731782
DIN3016-1-A1-45X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-45X20-W1-2: RNCC: 3 | RNVC: 2
RS1.45/20: RNCC: 3 | RNVC: 2
4110025045: RNCC: 5 | RNVC: 2
RS1100-45-25: RNCC: 5 | RNVC: 2
RS1100.45/20: RNCC: 5 | RNVC: 2
DIN3016-A1-45X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A45X20-W1: RNCC: 5 | RNVC: 9
VG95931A45X25W1: RNCC: 5 | RNVC: 9

22 Mar 1978

5340-12-174-0826
Dust And Moisture Seal Protective Plug

121740826
VG81299W17,1: RNCC: 2 | RNVC: 2
300F15: RNCC: 3 | RNVC: 2
GPN300F15: RNCC: 5 | RNVC: 2
000419020A: RNCC: 5 | RNVC: 2
300-591-302P: RNCC: 5 | RNVC: 2
300001500: RNCC: 5 | RNVC: 9
GPN300,F15: RNCC: 5 | RNVC: 9
F15: RNCC: 5 | RNVC: 9
F15GPN300: RNCC: 5 | RNVC: 9

6 Jun 1978

5340-12-703-2188
Loop Clamp

127032188
VG95211-ML-127032188: RNCC: 2 | RNVC: 2
T11-38-15-20BP GOST 17679-80: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-329-5843
Catch Strike

123295843
95048-104-003-006: RNCC: 3 | RNVC: 2
95048-104-003-006: RNCC: 5 | RNVC: 9

4 Sep 1992

5340-12-314-1047
Double Angle Bracket

123141047
66.3506.233.02-A001: RNCC: 3 | RNVC: 2
325992: RNCC: 5 | RNVC: 2

8 Jun 1988

5340-12-158-6851

5340-12-182-1321
Mounting Bracket

121821321
4063350246: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-306-1087
Clamping Catch

123061087
GT64ZB: RNCC: 3 | RNVC: 2
GT64ZB UND AC161ZB: RNCC: 5 | RNVC: 2

28 Jan 1986

5340-12-199-3622
Mending Plate

121993622
3095041540: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-192-7084
Elbow Catch

121927084
KT0326733: RNCC: 3 | RNVC: 2
KAT20323: RNCC: 5 | RNVC: 9

17 May 1982

5340-12-333-5148
Flare Lock Fastener

123335148
003 988 2078: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-040-0176

5340-12-320-6908
Mounting Bracket

123206908
9000 6103: RNCC: 3 | RNVC: 2

7 Feb 1990

5340-12-314-1884
Mounting Bracket

123141884
025115632: RNCC: 3 | RNVC: 9

15 Jun 1988

5340-12-193-8729
Bridge Clamp

121938729
5545240: RNCC: 3 | RNVC: 2
554.5240: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-090-8062

5340-12-314-1622
Mounting Bracket

123141622
4354300510: RNCC: 3 | RNVC: 2
435 430 05 10: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-324-1356
Mending Plate

123241356
400132383: RNCC: 3 | RNVC: 2

23 Jan 1991

5340-12-306-6631
Mending Plate

123066631
704-144100-913-0: RNCC: 3 | RNVC: 2
704-144100-913-0: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-12-199-5372
Angle Bracket

121995372
0951112100: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-386-8713
Mounting Bracket

123868713
L131M0002101: RNCC: 3 | RNVC: 2

11 Oct 2011

5340-12-185-1461
Loop Clamp

121851461
PAN4268-9-2: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-12-309-7818
Access Door

123097818
2300121-981111.001.0: RNCC: 2 | RNVC: 2
2300121-981111.001.0: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-360-8910
Quick Release Plunger

123608910
EH2208.999-N8: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-377-7805
Locking Shackle

123777805
84120045023: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-342-0564
Retaining Strap

123420564
2143267: RNCC: 3 | RNVC: 2
2955GL-PG16: RNCC: 5 | RNVC: 2

4 Dec 1996

5340-12-310-4860
Mending Plate

123104860
2300227-341100.005: RNCC: 2 | RNVC: 2
2300227-341100.005: RNCC: 3 | RNVC: 2
2300227-341100.005: RNCC: 5 | RNVC: 9

26 May 1987

5340-12-132-4664

5340-12-040-0524

5340-12-387-6508
Mounting Bracket

123876508
DR8642G114: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-12-364-3970
Dust And Moisture Seal Protective Plug

123643970
33311130780: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-365-1751
Latch Bar

123651751
1049-U5: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-364-4418
Access Cover

123644418
217186: RNCC: 3 | RNVC: 2
217186: RNCC: 5 | RNVC: 9

25 Sep 2004

5340-12-194-2218
Mending Plate

121942218
23182-7207: RNCC: 3 | RNVC: 2
23182-7207: RNCC: 5 | RNVC: 9

12 Oct 1982

5340-12-338-1076
Retaining Strap

123381076
160-75785: RNCC: 3 | RNVC: 2
15160-75785: RNCC: 5 | RNVC: 2
160-75785: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-303-2432
Double Angle Bracket

123032432
P-886755-001: RNCC: 3 | RNVC: 2
P886755-001: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-355-1783
Mounting Bracket

123551783
VG95211-ML-123551783: RNCC: 2 | RNVC: 2
5.12.0246.0450.91: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-12-701-6150
Angle Bracket

127016150
VG95211-ML-127016150: RNCC: 2 | RNVC: 2
5.12.7010.1620.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-3783
Dust And Moisture Seal Protective Plug

123053783
P730002-405-32H-001-149E: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-12-309-2999
Angle Bracket

123092999
0A846.91-10-21-02-003: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-12-325-0857
Mounting Plate

123250857
2300061-053000.013: RNCC: 2 | RNVC: 2
2300061-053000.013: RNCC: 3 | RNVC: 2
2300061-053000.013: RNCC: 5 | RNVC: 9

30 Apr 1991

5340-12-183-3902
Mounting Bracket

121833902
1121-95040.54: RNCC: 3 | RNVC: 2
1121-95040-54: RNCC: 5 | RNVC: 2

10 Apr 1980

5340-12-374-1491
Manual Control Lever

123741491
153 6150-623: RNCC: 3 | RNVC: 2
153 6150-623: RNCC: 5 | RNVC: 2

23 Jan 2008

5340-12-303-4113
Angle Bracket

123034113
4252602060: RNCC: 3 | RNVC: 2

20 Mar 1985

5340-12-028-0100

5340-12-010-8456

5340-12-366-0360
Mounting Bracket

123660360
9304295968: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-323-9385
Lock-Release Lever

123239385
1000025-141500.18: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-359-1942
Mounting Bracket

123591942
9415231540: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-316-0071
Mounting Bracket

123160071
54.0042.320.00: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-183-2516
Retaining Strap

121832516
51056400014: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-352-6347
Mounting Bracket

123526347
1221 2387: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-359-8280
Mounting Bracket

123598280
300.022.233: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-301-9964
Coat And Hat Hook

123019964
3358125026: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-301-0662
Butt Hinge Leaf

123010662
54.0028.184.01: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-702-2328
Blank Panel

127022328
VG95211-ML-127022328: RNCC: 2 | RNVC: 2
30.7701.221.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-391-3258
Filler Opening Cap

123913258
9193-060000-00A: RNCC: 3 | RNVC: 2
459939: RNCC: 5 | RNVC: 2

6 Mar 2013

5340-12-303-2622
Angle Bracket

123032622
P-886763-002: RNCC: 3 | RNVC: 2
P886763-002: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-344-4227
Mounting Bracket

123444227
A-616743-017: RNCC: 3 | RNVC: 2
A616743-017: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-301-3822
Butt Hinge Leaf

123013822
P-856073-001: RNCC: 3 | RNVC: 2
P856073-001: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-161-9946
Loop Clamp

121619946
DIN3016-2-G1-40X15-W1-2: RNCC: 2 | RNVC: 2
SP40/15SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-40X15-W1-2: RNCC: 3 | RNVC: 2
1410000040: RNCC: 5 | RNVC: 2
SP40-15SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-40X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G40X15-W1: RNCC: 5 | RNVC: 9
VG95931G40X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-5279
Loop Clamp

123295279
NO PRIMARY REF 12-329-5279: RNCC: 3 | RNVC: 2
58R052-151-26: RNCC: 5 | RNVC: 9
DIN3016-D1-34X15-W5: RNCC: 5 | RNVC: 9
DIN3016-D1-34X15-W5: RNCC: 5 | RNVC: 9
DIN6013-1-D1-34X15-W5: RNCC: 5 | RNVC: 9
RSGU1.34/15-W5: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-12-172-9970
Nonmetallic Bumper

121729970
2300014-262121.01.0: RNCC: 2 | RNVC: 2
2300014.262121.01.0: RNCC: 3 | RNVC: 2
2300014-262121-01-0: RNCC: 5 | RNVC: 2
2300014-262121-01-0: RNCC: 5 | RNVC: 9
2300014-262121.01.0: RNCC: 5 | RNVC: 9

13 Mar 1978

5340-12-311-1304
Mending Plate

123111304
P-085017-003: RNCC: 3 | RNVC: 2
P085017-003: RNCC: 5 | RNVC: 2

29 Jul 1987

5340-12-173-8545
Retaining Strap

121738545
P-296652-015: RNCC: 3 | RNVC: 2
P296652-015: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-354-6124
Bow Handle

123546124
5.034-327.0: RNCC: 3 | RNVC: 2

8 Aug 2001

5340-12-334-0220
Turnbuckle

123340220
5700020V: RNCC: 3 | RNVC: 2
S-17045-3/19: RNCC: 5 | RNVC: 2
S-18136A-34: RNCC: 5 | RNVC: 2

10 Mar 1994

5340-12-148-9321
Webbing Strap

121489321
23176-261320.00.0: RNCC: 2 | RNVC: 2
82300-23176-262320.00.0: RNCC: 3 | RNVC: 2
23176-261320-00-0: RNCC: 5 | RNVC: 2
23176-261320.00.0: RNCC: 5 | RNVC: 2
4515240435: RNCC: 5 | RNVC: 2
23176-261320.00.0: RNCC: 5 | RNVC: 9
23176-261320-00-0: RNCC: 5 | RNVC: 9
82300-G570X100X30-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-373-5198
Multiple Angle Bracket

123735198
2300223-060310.00.0: RNCC: 2 | RNVC: 2
2300223-060310.00.0: RNCC: 3 | RNVC: 2

12 Nov 2007

5340-12-365-3306
Mounting Plate

123653306
2300109-010230.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-394-5360
Mechanical Stop

123945360
314710: RNCC: 3 | RNVC: 2
5184-02-00-32/35: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-321-2495
Retaining Strap

123212495
536L02008: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-320-7331
Mounting Bracket

123207331
54.0062.980.02: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-320-6592
Double Angle Bracket

123206592
46711457390: RNCC: 3 | RNVC: 2
1457390: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-352-6590
Mounting Bracket

123526590
5400049-721050.01: RNCC: 2 | RNVC: 2
5400049-721050.01: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-12-184-0475
Nonmetallic Bumper

121840475
100073: RNCC: 3 | RNVC: 2

19 Jun 1980

5340-12-197-2370
Elastic Cord Assembly

121972370
101706: RNCC: 3 | RNVC: 2

4 Oct 1983

5340-12-344-2380
Access Cover

123442380
2500255-531500.001.0: RNCC: 2 | RNVC: 2
2500255-531500.001.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-360-6778
Extension Drawer Slide

123606778
5.043.810.7: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-12-375-7987
Rod End Clevis

123757987
03-124802/0: RNCC: 3 | RNVC: 2
03-124802/0: RNCC: 5 | RNVC: 9

4 Jul 2008

5340-12-330-2019
Manual Control Handle

123302019
14 ARA F ZK: RNCC: 3 | RNVC: 2
105656: RNCC: 5 | RNVC: 2

13 Nov 1992

5340-12-179-6004
Resilient Mount

121796004
3158900101: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-184-6297
Dust And Moisture Seal Protective Cap

121846297
113201539: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-12-391-3361
Runner

123913361
3066336: RNCC: 3 | RNVC: 2
03066336: RNCC: 5 | RNVC: 2

6 Mar 2013

5340-12-321-1003
Angle Bracket

123211003
03878900: RNCC: 3 | RNVC: 2

27 Mar 1990

5340-12-356-9490
Mounting Plate

123569490
700169000014: RNCC: 3 | RNVC: 2
14MMN169: RNCC: 5 | RNVC: 9

18 Apr 2002

5340-12-356-3282
Mounting Bracket

123563282
167.061.159: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-354-8664
Manual Control Handle

123548664
135909: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-173-8517
Retaining Strap

121738517
PAN4231BCC4118: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-391-4323
Mounting Bracket

123914323
I010721TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-370-4826
Mounting Bracket

123704826
54.1094.673.00: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-12-380-0388
Mounting Bracket

123800388
96500041: RNCC: 3 | RNVC: 2

22 Sep 2009

5340-12-010-8504

5340-12-359-9987
Permanent Magnet

123599987
371 502: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-323-6058
Rod End Clevis

123236058
01TC30218: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-040-6386

5340-12-353-6452
Retaining Bail

123536452
000000-1001.428: RNCC: 3 | RNVC: 2
000000-1001.428: RNCC: 5 | RNVC: 2
000000-1001.428: RNCC: 5 | RNVC: 9

23 Apr 2001

5340-12-364-4822
Spacing Threaded Standoff

123644822
54.1107.450.01: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-314-1781
Retaining Strap

123141781
151-13019: RNCC: 3 | RNVC: 2
RA6: RNCC: 5 | RNVC: 2
RA-6: RNCC: 5 | RNVC: 2

15 Jun 1988

5340-12-187-6354
Metal Runner

121876354
2300109-063132.001.0: RNCC: 2 | RNVC: 2
2300109-063132.001.0: RNCC: 3 | RNVC: 2
2300109-063132.001.0: RNCC: 3 | RNVC: 2
2300109-063132-001-0: RNCC: 5 | RNVC: 9
2300109-063132.001.0: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-12-332-1602
Mending Plate

123321602
702-942710-001-0: RNCC: 2 | RNVC: 2
702-942710-001-0: RNCC: 3 | RNVC: 2

22 Jul 1993

5340-12-306-6615
Angle Bracket

123066615
704-152500-903-0: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-331-7125
Resilient Mount

123317125
H63-146-90-102-4: RNCC: 3 | RNVC: 2

14 Jun 1993

5340-12-702-5204
Mounting Bracket

127025204
VG95211-ML-127025204: RNCC: 2 | RNVC: 2
5.51.7004.0070.06: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-366-1368
Mounting Bracket

123661368
2500267-190000.010.0: RNCC: 2 | RNVC: 2
2500267-190000.010.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-147-1386
Loop Clamp

121471386
6TAN15801-1-4544-9: RNCC: 3 | RNVC: 2
10N6TAN15801: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-171-4578
Helical Compression Spring Retainer

121714578
306-124-81-020: RNCC: 3 | RNVC: 2
039265: RNCC: 5 | RNVC: 2
81.67112-0001: RNCC: 5 | RNVC: 2
81671120001: RNCC: 5 | RNVC: 2
23251-200710-011-0: RNCC: 5 | RNVC: 9
23251-200710.011.0: RNCC: 5 | RNVC: 9

13 Oct 1977

5340-12-351-2121
Dust And Moisture Seal Protective Plug

123512121
24152: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-12-198-4926
Door Button

121984926
4358107012: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-12-382-2268
Dust And Moisture Seal Protective Cap

123822268
P011502: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-353-0305
Dust And Moisture Seal Protective Cover

123530305
1218 8093: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-189-1836
Angle Bracket

121891836
8370781541: RNCC: 3 | RNVC: 2
4798716: RNCC: 5 | RNVC: 2

9 Sep 1981

5340-12-191-5575
Dust And Moisture Seal Protective Cap

121915575
81.96410.0042: RNCC: 3 | RNVC: 2
81964100042: RNCC: 5 | RNVC: 2

10 Feb 1982

5340-12-343-0795
Lock-Release Lever

123430795
CF 842 253 BE: RNCC: 2 | RNVC: 2
CF 842 253 BE: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-302-1750
Handle Grip

123021750
08-033-51: RNCC: 3 | RNVC: 2
83351: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-332-8228
Double Angle Bracket

123328228
1361235-16039-00: RNCC: 3 | RNVC: 2

23 Sep 1993

5340-12-355-1395
Section Block Clamp

123551395
J32320145-001: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-301-2434
Friction Catch

123012434
P-856311-401: RNCC: 3 | RNVC: 2
P856311-401: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-313-1677
Electrical-Mechanical Equipment Post

123131677
5801699-3100.01: RNCC: 2 | RNVC: 2
5801699-3100.01: RNCC: 3 | RNVC: 2

9 Mar 1988

5340-12-359-9358
Manual Control Lever

123599358
2500261-183418.000.0: RNCC: 2 | RNVC: 2
2500261-183418.000.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-363-6207
Loop Clamp

123636207
DIN3016-1-D2-24-24X15-W1-2-NBR: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-197-6742
Angle Bracket

121976742
A-921245-001: RNCC: 3 | RNVC: 2
A921245-001: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-322-3444
Friction Catch

123223444
43712418-601: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-179-1415
Nonmetallic Bumper

121791415
3818110028: RNCC: 3 | RNVC: 2

8 Jun 1979

5340-12-187-9953
Angle Bracket

121879953
03062100: RNCC: 3 | RNVC: 2
03062100.294: RNCC: 5 | RNVC: 9
29.01.07B: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-197-0427
Nonmetallic Bumper

121970427
3097430214: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-12-387-0384
Protection Bellows

123870384
58150129: RNCC: 3 | RNVC: 2
CV190755: RNCC: 5 | RNVC: 2
58150129: RNCC: 5 | RNVC: 2

28 Oct 2011

5340-12-179-7023
Nonmetallic Bumper

121797023
5946900: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-311-2221
Clamping Catch

123112221
DIN3132-D90ZN8: RNCC: 2 | RNVC: 2
0626700: RNCC: 3 | RNVC: 2
D90DIN3132-ST-ZN8: RNCC: 5 | RNVC: 2
DIN3132-D90-ZN8: RNCC: 5 | RNVC: 2
DIN3132-D90-ZN5: RNCC: 5 | RNVC: 9
DIN3132-D90ZN5: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-12-163-3668
Bridge Clamp

121633668
100080-0.27: RNCC: 2 | RNVC: 2
100080-0.27: RNCC: 5 | RNVC: 2
100080-0.27: RNCC: 5 | RNVC: 9
HT11/3891/01: RNCC: 5 | RNVC: 9
100080-0-27: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-6633
Angle Bracket

121726633
03416245: RNCC: 3 | RNVC: 2
5145-72-30-11: RNCC: 5 | RNVC: 2
5145-72-30.11: RNCC: 5 | RNVC: 2
E5145-72-30-11: RNCC: 5 | RNVC: 2
3416245EE5087-72: RNCC: 5 | RNVC: 2

8 Feb 1978

5340-12-372-3969
Mounting Plate

123723969
V6560-08004-107: RNCC: 2 | RNVC: 2
V6560-08004-107: RNCC: 3 | RNVC: 2

13 Jul 2007

5340-12-179-2925
Lock-Release Lever

121792925
06450-3082: RNCC: 3 | RNVC: 2
709-390.000-000: RNCC: 5 | RNVC: 2
645-308: RNCC: 5 | RNVC: 9
NLM645-3082: RNCC: 5 | RNVC: 9
NLM6450-3082: RNCC: 5 | RNVC: 9

20 Jun 1979

5340-12-196-4890
Mending Plate

121964890
5801435-050800.01: RNCC: 2 | RNVC: 2
5801435-050800.01: RNCC: 3 | RNVC: 2
5801435-050800-01: RNCC: 5 | RNVC: 2

12 Jul 1983

5340-12-179-1784
Platte

121791784
5801113-1111-008: RNCC: 3 | RNVC: 2
5801113-1111.008: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-701-4665
Loop Clamp

127014665
VG95211-ML-127014665: RNCC: 2 | RNVC: 2
5.12.5314.8220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-379-6633
Bow Handle

123796633
GN425-8-88: RNCC: 3 | RNVC: 2

20 Aug 2009

5340-12-344-3743
Mounting Bracket

123443743
A-296771-027: RNCC: 3 | RNVC: 2
A296771-027: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-301-0046
Angle Bracket

123010046
P-296895-408: RNCC: 3 | RNVC: 2
P296895-408: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-195-0167
Escutcheon Plate

121950167
5577096: RNCC: 3 | RNVC: 2
557.7096: RNCC: 5 | RNVC: 2

30 Dec 1982

5340-12-318-9893
Folding Stay

123189893
6030246: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-12-335-5011
Butt Hinge Leaf

123355011
8400241107: RNCC: 3 | RNVC: 2
84002 41107: RNCC: 5 | RNVC: 2

24 Aug 1994

5340-12-300-9252
Compression Cup

123009252
3635050180: RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-327-0086
Angle Bracket

123270086
7002586: RNCC: 3 | RNVC: 2

19 Nov 1991

5340-12-134-4448

5340-12-188-5742
Butt Hinge

121885742
5801758-2122.00: RNCC: 2 | RNVC: 2
5801758-2122.00: RNCC: 3 | RNVC: 2
5801758-2122-00: RNCC: 5 | RNVC: 9
5801758-2122.00: RNCC: 5 | RNVC: 9
5801758-2122-00: RNCC: 5 | RNVC: 9

20 Jul 1981

5340-12-184-7174
Access Cover

121847174
5800758-00-03: RNCC: 3 | RNVC: 2
5800758-00-03: RNCC: 5 | RNVC: 9

14 Aug 1980

5340-12-123-2196
Retaining Strap

121232196
03430784: RNCC: 3 | RNVC: 2
3430784EF5093-29: RNCC: 5 | RNVC: 2
5166-29-20-11: RNCC: 5 | RNVC: 2
5166-29-20.11: RNCC: 5 | RNVC: 2
F5166-29-20-11: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-1904
Manual Control Lever

123501904
2125-112232.00C: RNCC: 2 | RNVC: 2
2125-112232.00C: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-12-301-7696
Nonmetallic Bumper

123017696
4179161: RNCC: 3 | RNVC: 2
S12B.K05.00.00.013: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-193-3118
Resilient Mount

121933118
4609885111: RNCC: 3 | RNVC: 2
721 1 49 118 2: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-374-8641
Access Cover

123748641
SK976-172910.000.0: RNCC: 3 | RNVC: 2
1781428: RNCC: 5 | RNVC: 9

1 Apr 2008

5340-12-701-1509
Metal Grille

127011509
VG95211-ML-127011509: RNCC: 2 | RNVC: 2
5.12.0200.1850.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-6510
Hasp Staple

121746510
882: RNCC: 3 | RNVC: 2
6.371-027.0: RNCC: 5 | RNVC: 2
9000 2320: RNCC: 5 | RNVC: 2
0745110151: RNCC: 5 | RNVC: 2
N3472: RNCC: 5 | RNVC: 2

17 Jul 1978

Load More Results