What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 86 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 86 of 178

5340-12-361-4826
Mounting Bracket

123614826
2654-336220.05: RNCC: 2 | RNVC: 2
2654-336220.05: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-169-7534
Spring Tension Clip

121697534
A11A141010212: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-359-2664
Flush Lock

123592664
6708906367: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-12-300-8438
Angle Bracket

123008438
4254260740: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-192-3161
Spring Tension Clip

121923161
42300055: RNCC: 3 | RNVC: 2
42300055EE5508-49: RNCC: 5 | RNVC: 2
42300055: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-329-7611
Runner

123297611
2300248-81000.05: RNCC: 2 | RNVC: 2
2300248-81000.05: RNCC: 3 | RNVC: 2
2300248-81000.05: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-12-344-3517
Retaining Strap

123443517
28201870445: RNCC: 3 | RNVC: 2
28201870445 E0: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-360-2980
Loop Clamp

123602980
0009300112: RNCC: 3 | RNVC: 2
0009300112: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-319-5334
Mending Plate

123195334
5802006-201800.03: RNCC: 2 | RNVC: 2
5802006-201800.03: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-164-5441
Mounting Bracket

121645441
23290-181289.000: RNCC: 2 | RNVC: 2
9804828: RNCC: 3 | RNVC: 2
23290-181289.000: RNCC: 5 | RNVC: 9
9804828: RNCC: 5 | RNVC: 9
23290-181289: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-8469
Angle Bracket

123938469
11.29225-0045: RNCC: 3 | RNVC: 2
11.29225-0045: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-329-0168
Electrical-Mechanical Equipment Post

123290168
C42080-A26-C84: RNCC: 2 | RNVC: 2
C42080-A26-C84: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-12-385-6754
Access Door Hinge

123856754
F1.1189-40-30-10.20-00: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-193-8270
Angle Bracket

121938270
30-92101-0129: RNCC: 3 | RNVC: 2
30.92101-0129: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-12-354-8495
Loop Clamp

123548495
RS1100.33/15: RNCC: 3 | RNVC: 2
15210049: RNCC: 5 | RNVC: 2
15210049: RNCC: 5 | RNVC: 2

30 Aug 2001

5340-12-134-5186
Loop Clamp

121345186
0144-39-07-16: RNCC: 3 | RNVC: 2
0336 0170: RNCC: 5 | RNVC: 2
3360170EE0144-39: RNCC: 5 | RNVC: 2
3360170: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-0910
Mounting Bracket

127020910
VG95211-ML-127020910: RNCC: 2 | RNVC: 2
30.5311.510: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-4040
Angle Bracket

123154040
1461332326: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-091-3395

5340-12-391-4272
Mounting Bracket

123914272
I007131TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-324-4749
Retaining Band

123244749
0960501: RNCC: 3 | RNVC: 2

20 Feb 1991

5340-12-335-5328
Helical Compression Spring Seat

123355328
1030530825: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-179-7239
Webbing Strap

121797239
72570161: RNCC: 3 | RNVC: 2
72782836: RNCC: 5 | RNVC: 2

23 Jul 1979

5340-12-179-7719
Catch Strike

121797719
4257520811: RNCC: 3 | RNVC: 2
A4257520811: RNCC: 5 | RNVC: 2
4257520811: RNCC: 5 | RNVC: 2
A4257520811: RNCC: 5 | RNVC: 2
4257520811: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-307-2307
Flush Lock

123072307
316-05-1: RNCC: 3 | RNVC: 2
320-22312-04: RNCC: 5 | RNVC: 2

23 May 1986

5340-12-349-0885
Retaining Clip

123490885
WRYUG2419: RNCC: 3 | RNVC: 2
ST46409: RNCC: 5 | RNVC: 9

22 Sep 1999

5340-12-308-7662
Metal Runner

123087662
351271266751: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-12-348-1244
Runner

123481244
4312 713 0206: RNCC: 3 | RNVC: 9
43127130206: RNCC: 5 | RNVC: 9
43127130206: RNCC: 5 | RNVC: 9

19 Apr 1999

5340-12-360-4122
Mounting Plate

123604122
3514322700: RNCC: 3 | RNVC: 2
3514322700: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-179-2445
Mounting Bracket

121792445
2483201: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-386-8774
Mounting Bracket

123868774
05720263: RNCC: 3 | RNVC: 2
04296837: RNCC: 5 | RNVC: 2
CV191792: RNCC: 5 | RNVC: 2
05720263: RNCC: 5 | RNVC: 2

11 Oct 2011

5340-12-091-3438

5340-12-346-4131
Dust And Moisture Seal Protective Plug

123464131
750PG16: RNCC: 3 | RNVC: 2
GPN750PG16: RNCC: 5 | RNVC: 2

23 Jul 1998

5340-12-183-8124
Loop Clamp

121838124
181885559: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-145-1618

5340-12-330-7711
Mounting Plate

123307711
WW 201 124 AR: RNCC: 3 | RNVC: 2
WW 201 124 AR: RNCC: 5 | RNVC: 2
WW201124AR: RNCC: 5 | RNVC: 2
WW201124AR: RNCC: 5 | RNVC: 2

5 Feb 1993

5340-12-385-5379
Lever Bracket

123855379
F11.20870-0002: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-356-7046
Rod End Clevis

123567046
33036-003-026: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-179-1793
Platte

121791793
5800828-13512-005: RNCC: 3 | RNVC: 2
5800828-13512.005: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-351-2019
Mounting Bracket

123512019
8854 131-281: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-12-179-7393
Access Cover

121797393
5801113-56: RNCC: 3 | RNVC: 2

25 Jul 1979

5340-12-184-4753
Clamping Catch

121844753
PAN5105-040196: RNCC: 3 | RNVC: 2

29 Jul 1980

5340-12-340-1333
Butt Hinge Leaf

123401333
181407601: RNCC: 3 | RNVC: 2
E181407601: RNCC: 5 | RNVC: 2

2 Mar 1996

5340-12-332-0529
Loop Clamp

123320529
A11B741122160: RNCC: 3 | RNVC: 2

19 Jul 1993

5340-12-378-5239
Dust And Moisture Seal Protective Plug

123785239
0134 0157: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-12-349-9090
Double Angle Bracket

123499090
A1Z10283625: RNCC: 2 | RNVC: 2
A1Z10283625: RNCC: 3 | RNVC: 2
20361254: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-354-8492
Strap Hinge Leaf

123548492
J52423272-003: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-313-5915
Retaining Band

123135915
588.90-222000-025: RNCC: 3 | RNVC: 2
122031: RNCC: 5 | RNVC: 2

19 Apr 1988

5340-12-382-0739
Halter

123820739
161005: RNCC: 3 | RNVC: 2
044368: RNCC: 5 | RNVC: 2
01-200.23-00.00-23: RNCC: 5 | RNVC: 2

5 May 2010

5340-12-342-2417
Access Cover

123422417
11059880021: RNCC: 3 | RNVC: 2
11.05988-0021: RNCC: 5 | RNVC: 2
11059880021: RNCC: 5 | RNVC: 2
11.05988-0021: RNCC: 5 | RNVC: 2
11.05988-0021: RNCC: 5 | RNVC: 2

9 Jan 1997

5340-12-166-6424
Mending Plate

121666424
14021-20002-04: RNCC: 3 | RNVC: 2
893549: RNCC: 5 | RNVC: 2

30 Sep 1976

5340-12-329-4188
Electrical-Mechanical Equipment Post

123294188
1300555-580000-14-01: RNCC: 2 | RNVC: 2
VS5023T058: RNCC: 3 | RNVC: 2
VS5023T058: RNCC: 5 | RNVC: 9

18 Aug 1992

5340-12-302-1751
Mending Plate

123021751
08-033-52: RNCC: 3 | RNVC: 2
83352: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-371-7287
Angle Bracket

123717287
81669120134: RNCC: 3 | RNVC: 2
81.66912-0134: RNCC: 5 | RNVC: 2
81.66912.0134: RNCC: 5 | RNVC: 2

9 May 2007

5340-12-199-5331
Webbing Strap

121995331
2300088-104179.00: RNCC: 2 | RNVC: 2
9864260: RNCC: 3 | RNVC: 2
2300088-104179.00: RNCC: 3 | RNVC: 9
2300088-104179.00: RNCC: 5 | RNVC: 9
2300088-104179.00: RNCC: 5 | RNVC: 9
9864260: RNCC: 5 | RNVC: 9
000-C1-25X2,0X800-PE-RAL6031: RNCC: 6 | RNVC: 9

9 May 1984

5340-12-335-8614
Bridge Clamp

123358614
0286103: RNCC: 3 | RNVC: 2
EZ02861: RNCC: 5 | RNVC: 2

26 Sep 1994

5340-12-365-9064
Plain Solid Disk

123659064
05081002: RNCC: 3 | RNVC: 2

17 Feb 2005

5340-12-365-6105
Rod End Clevis

123656105
202780: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-343-9267
Mounting Bracket

123439267
6064190: RNCC: 3 | RNVC: 2
606.4190: RNCC: 5 | RNVC: 9

14 Aug 1997

5340-12-365-0518
Mounting Plate

123650518
5160-541000A01B: RNCC: 2 | RNVC: 2
5160-541000A01B: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-123-3029
Escutcheon Plate

121233029
01237555: RNCC: 3 | RNVC: 2
1237555EE8929-29: RNCC: 5 | RNVC: 2
N92082D: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-023-2154

5340-12-180-3162
Retaining Strap

121803162
90.403.00.192: RNCC: 3 | RNVC: 2
42484991: RNCC: 5 | RNVC: 2
42484991EY5505-31: RNCC: 5 | RNVC: 2
90-403-00-19-2: RNCC: 5 | RNVC: 2
90.403.00.19.2: RNCC: 5 | RNVC: 2
0008330281: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-173-7912
Loop Clamp

121737912
P-296652-403: RNCC: 3 | RNVC: 2
P296652-403: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-317-1802
Nonmetallic Bumper

123171802
59007501: RNCC: 3 | RNVC: 2
GF40/63 QUALITAET4085: RNCC: 3 | RNVC: 2
4603170612: RNCC: 5 | RNVC: 2
85.106.FGF.1B.3: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-164-4425
Support Hook

121644425
2360-181130.27.0: RNCC: 2 | RNVC: 2
2360-181130-27-0: RNCC: 5 | RNVC: 2
2360-181130.27.0: RNCC: 5 | RNVC: 2
2360-181130.27.0: RNCC: 5 | RNVC: 2
2360-181130-27-0: RNCC: 5 | RNVC: 9
2360-181130.27.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-4403
Retaining Strap

121954403
DIN3016-1-F2-14-14X15-W1-2-CR: RNCC: 2 | RNVC: 2
4229215014: RNCC: 3 | RNVC: 2
DIN3016-F14-14X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1200.14-14/15: RNCC: 5 | RNVC: 2
RSGU1200.2X14/15: RNCC: 5 | RNVC: 2
RSGU2.2X14/15: RNCC: 5 | RNVC: 9
DIN3016-F14-14X15-W1-2: RNCC: 5 | RNVC: 9
DIN3016-F2-14-14X15-W1-2: RNCC: 5 | RNVC: 9

24 Feb 1983

5340-12-186-6947
Angle Bracket

121866947
25704-190820.05.0: RNCC: 2 | RNVC: 2
25704-190820.05.0: RNCC: 3 | RNVC: 2
25704-190820-05-0: RNCC: 5 | RNVC: 2
25704-190820-05-0: RNCC: 5 | RNVC: 9
25704-190820.05.0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-335-1049
Pipe Hanger

123351049
273.608: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-12-393-0086
Nut And Bolt Head Protective Cap

123930086
93361: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-358-8758
Dust And Moisture Seal Protective Cap

123588758
701420: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-195-2414
Retaining Strap

121952414
BSN2X12X20X2: RNCC: 3 | RNVC: 2
5220000012: RNCC: 5 | RNVC: 2

27 Jan 1983

5340-12-351-2243
Angle Bracket

123512243
2500113-2770.11: RNCC: 2 | RNVC: 2
2500113-2770.11: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-166-0871
Access Cover

121660871
02528: RNCC: 3 | RNVC: 2
02528: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-348-0412
Angle Bracket

123480412
4185441338: RNCC: 3 | RNVC: 2
418 544 13 38: RNCC: 5 | RNVC: 2

30 Mar 1999

5340-12-388-6867
Dust And Moisture Seal Protective Cap

123886867
4700368134: RNCC: 3 | RNVC: 2

13 Apr 2012

5340-12-179-9825
Webbing Strap

121799825
3827900696: RNCC: 3 | RNVC: 2

14 Aug 1979

5340-12-386-8193
Webbing Strap

123868193
2244/90.49: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-12-182-2178
Retaining Strap

121822178
5801215-1021-004: RNCC: 3 | RNVC: 2
5801215-1021.004: RNCC: 5 | RNVC: 2

21 Jan 1980

5340-12-340-7918
Spring Tension Clip

123407918
23182-7011.01: RNCC: 2 | RNVC: 2
23182-7011.01: RNCC: 3 | RNVC: 2
29718: RNCC: 5 | RNVC: 2

13 Jun 1996

5340-12-172-8873
Headless Straight Rod

121728873
2300005-4721-03: RNCC: 3 | RNVC: 2
2300005-4721-03: RNCC: 5 | RNVC: 9
2300005-4721-03: RNCC: 5 | RNVC: 9

2 Mar 1978

5340-12-197-7575
Webbing Strap

121977575
GE10056D-9500-1500: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-331-6318
Pad Eye

123316318
U100-3222-000: RNCC: 2 | RNVC: 2
U100-3222-000: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-12-355-4278
Mounting Bracket

123554278
1304 333 011: RNCC: 3 | RNVC: 2
1304333011: RNCC: 5 | RNVC: 9

14 Nov 2001

5340-12-094-4204

5340-12-177-2943
Pipe Bracket

121772943
51974010350: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-358-8257
Access Cover

123588257
3892610420: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-351-5102
Multiple Angle Bracket

123515102
4616100936: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-353-9528
Handle Grip

123539528
590619-8110.000: RNCC: 3 | RNVC: 2
590619-8110.000: RNCC: 5 | RNVC: 2
590619-8110.000: RNCC: 5 | RNVC: 9

22 May 2001

5340-12-325-7212
Access Cover

123257212
2500075-065169.000.0: RNCC: 3 | RNVC: 2
2500075-065169.000.0: RNCC: 5 | RNVC: 9

2 Jul 1991

5340-12-382-8380
Mounting Bracket

123828380
10113-012100.011.0: RNCC: 2 | RNVC: 2
10113-012100.011.0: RNCC: 3 | RNVC: 2

13 Aug 2010

5340-12-150-2459
Rod End Clevis

121502459
7-29-7-02-80-05-01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-3240
Retaining Strap

123223240
45146: RNCC: 3 | RNVC: 2
44-510-1: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-196-9972
Angle Bracket

121969972
4900059-212066.000.0: RNCC: 3 | RNVC: 2
4900059-212066-000-0: RNCC: 5 | RNVC: 2

8 Sep 1983

5340-12-300-2834
Handle Grip

123002834
DIN39-E13-ST: RNCC: 2 | RNVC: 2
DIN39E13: RNCC: 5 | RNVC: 2
E13DIN39-ST: RNCC: 5 | RNVC: 2

20 Jul 1984

5340-12-301-6173
Nut And Bolt Locking Plate

123016173
9590203201: RNCC: 3 | RNVC: 2
7391-949: RNCC: 5 | RNVC: 2
7391949: RNCC: 5 | RNVC: 2
230880: RNCC: 5 | RNVC: 2

26 Oct 1984

5340-12-337-0291
Dust And Moisture Seal Protective Plug

123370291
88960020071: RNCC: 3 | RNVC: 2
300V141: RNCC: 3 | RNVC: 2
GPN300V141: RNCC: 5 | RNVC: 2
V141: RNCC: 5 | RNVC: 9
88.96002.0071: RNCC: 5 | RNVC: 9
GPN300-V141: RNCC: 5 | RNVC: 9

12 Jan 1995

5340-12-702-4814
Headless Straight Rod

127024814
VG95211-ML-127024814: RNCC: 2 | RNVC: 2
5.51.0607.0040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-184-2195
Angle Bracket

121842195
5801357-1100.06: RNCC: 2 | RNVC: 2
5801357-1100.06: RNCC: 3 | RNVC: 2
5801357-1100-06: RNCC: 5 | RNVC: 9
5801357-1100-06: RNCC: 5 | RNVC: 9
5801357-1100-06: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-331-7396
Mounting Bracket

123317396
480-7347-02-00-00-10: RNCC: 3 | RNVC: 2
480/7347-02-00-00/10: RNCC: 5 | RNVC: 2

16 Jun 1993

5340-12-344-8641
Angle Bracket

123448641
5803514-201100.01: RNCC: 2 | RNVC: 2
55.0205.622.01: RNCC: 3 | RNVC: 2
5803514-201100.01: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-370-1086
Barrel Bolt

123701086
1000-U51: RNCC: 3 | RNVC: 2
05.10060-1601: RNCC: 5 | RNVC: 2

21 Sep 2006

5340-12-348-9868
Runner

123489868
245/7346-46-00-91: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-133-2969

5340-12-302-0854
Dust And Moisture Seal Protective Cap

123020854
B13X18,1N13018: RNCC: 3 | RNVC: 2
913018013201: RNCC: 5 | RNVC: 2

30 Nov 1984

5340-12-354-1393
Mounting Bracket

123541393
6735204341: RNCC: 3 | RNVC: 2

8 Jun 2001

5340-12-346-1635
Mounting Bracket

123461635
TA3024P001: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-12-344-6549
Dust And Moisture Seal Protective Cap

123446549
54.0053.046.01: RNCC: 3 | RNVC: 2
3039A158-001: RNCC: 5 | RNVC: 2

24 Nov 1997

5340-12-373-9342
Mending Plate

123739342
81612100468: RNCC: 3 | RNVC: 2
81.61210-0468: RNCC: 5 | RNVC: 2

20 Dec 2007

5340-12-317-5941
Rod End Connector

123175941
9141270035: RNCC: 3 | RNVC: 2
4127-01-12-00: RNCC: 5 | RNVC: 2

20 Apr 1989

5340-12-345-8842
Manual Control Handle

123458842
4153-466: RNCC: 3 | RNVC: 2
4153466: RNCC: 5 | RNVC: 2

12 May 1998

5340-12-330-0188
Loop Clamp

123300188
LN9491BK24: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-314-6644
Mending Plate

123146644
WW 426 920: RNCC: 3 | RNVC: 9

27 Jul 1988

5340-12-350-5935
Runner

123505935
54.1038.130.12: RNCC: 2 | RNVC: 2
54.1038.130.12: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-313-3591
Resilient Mount

123133591
782002.NR55.ST: RNCC: 3 | RNVC: 2
782002MITTEL: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-12-359-9441
Double Angle Bracket

123599441
04153800: RNCC: 3 | RNVC: 2
05821267: RNCC: 5 | RNVC: 2

21 Mar 2003

5340-12-093-6755

5340-12-091-0762

5340-12-198-4832
Extension Drawer Slide

121984832
036.15044: RNCC: 3 | RNVC: 2
5801999-191000.01: RNCC: 5 | RNVC: 2
102-833-2: RNCC: 5 | RNVC: 2
5801999-191000.01: RNCC: 5 | RNVC: 9

1 Feb 1984

5340-12-187-8160
Catch Strike

121878160
2300109-970400.077.0: RNCC: 2 | RNVC: 2
2300109-970400.077.0: RNCC: 3 | RNVC: 2
2300109-970400.077.0: RNCC: 3 | RNVC: 2
2300109-970400-077-0: RNCC: 5 | RNVC: 2
2300109-970400-077-0: RNCC: 5 | RNVC: 2
2300109-970400-077-0: RNCC: 5 | RNVC: 9
2300109-970400.077.0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-359-7338
Mounting Bracket

123597338
S281M3041101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-359-0464
Webbing Strap

123590464
4357928296: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-373-1292
Dust And Moisture Seal Protective Cap

123731292
93192918: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-12-177-2126
Detent Plunger

121772126
3123531049: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-12-374-8759
Bow Handle

123748759
353 6310-801: RNCC: 3 | RNVC: 2
353 6310-801: RNCC: 5 | RNVC: 2

2 Apr 2008

5340-12-190-8869
Retaining Strap

121908869
3624522055: RNCC: 3 | RNVC: 2
36245 22055: RNCC: 5 | RNVC: 9

21 Dec 1981

5340-12-342-3671
Buckle

123423671
42.020.000: RNCC: 3 | RNVC: 9
TGS 25: RNCC: 5 | RNVC: 9

29 Jan 1997

5340-12-389-9330
Access Cover

123899330
1121-92026: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-12-317-1662
Angle Bracket

123171662
C249-A11-B59: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-331-4718
Protection Bellows

123314718
9265406: RNCC: 3 | RNVC: 2
86 001 1000 30 000: RNCC: 5 | RNVC: 2

7 May 1993

5340-12-366-0601
Double Angle Bracket

123660601
NN60760P01: RNCC: 3 | RNVC: 2

4 Mar 2005

5340-12-128-1216

5340-12-165-0469
Pad Eye

121650469
565-01-04-00-00-003: RNCC: 3 | RNVC: 2
042839: RNCC: 5 | RNVC: 2
565-01-040000003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-366-9475
Manual Control Lever

123669475
8-14-01: RNCC: 3 | RNVC: 2
431012M700207: RNCC: 5 | RNVC: 9

23 Jun 2005

5340-12-188-0042
Fusible Plug

121880042
1.045 1570: RNCC: 3 | RNVC: 2
3-60-15051REP42: RNCC: 5 | RNVC: 2
3.60-15051REP42: RNCC: 5 | RNVC: 2
1-0451570: RNCC: 5 | RNVC: 2

25 May 1981

5340-12-164-8508
Mending Plate

121648508
29 543-001: RNCC: 3 | RNVC: 2
29543-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-5874
Double Angle Bracket

121985874
23114-4122.01: RNCC: 2 | RNVC: 2
23114-4122.01: RNCC: 3 | RNVC: 2
23114-4122.01: RNCC: 5 | RNVC: 2
23114-4122-01: RNCC: 5 | RNVC: 9
23114-4122.01: RNCC: 5 | RNVC: 9
23114-4122-01: RNCC: 5 | RNVC: 9
23114-4122.01: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-196-2487
Resilient Mount

121962487
UP3.60: RNCC: 3 | RNVC: 9
86031031ED5055-13: RNCC: 5 | RNVC: 2
42204406: RNCC: 5 | RNVC: 2
86031031: RNCC: 5 | RNVC: 2

16 Jun 1983

5340-12-377-7701
Bow Handle

123777701
54.1328.348.00: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-346-6108
Mounting Bracket

123466108
8680.1019: RNCC: 3 | RNVC: 2

17 Aug 1998

5340-12-365-1597
Mending Plate

123651597
207571: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-327-4363
Rod End Clevis

123274363
6346564: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-362-5480
Access Cover

123625480
P70177103000: RNCC: 3 | RNVC: 2

6 Mar 2004

5340-12-307-2332
Retaining Strap

123072332
140-322000-901-0: RNCC: 3 | RNVC: 2

23 May 1986

5340-12-198-8221
Nonmetallic Bumper

121988221
5801758-0300.10: RNCC: 2 | RNVC: 2
5801758-0300.10: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-192-1182
Retaining Strap

121921182
4540754: RNCC: 3 | RNVC: 2
454.0754: RNCC: 5 | RNVC: 2
5801602-010100-012: RNCC: 5 | RNVC: 9

24 Mar 1982

5340-12-192-2099
Double Angle Bracket

121922099
4682290: RNCC: 3 | RNVC: 2
468.2290: RNCC: 5 | RNVC: 2
5801443-127202: RNCC: 5 | RNVC: 9

31 Mar 1982

5340-12-373-4671
Dust And Moisture Seal Protective Cover

123734671
T18-0004-001: RNCC: 3 | RNVC: 2

6 Nov 2007

5340-12-387-0131
Mounting Bracket

123870131
4461-0496: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-12-344-5827
Lock-Release Lever

123445827
272.322.429: RNCC: 3 | RNVC: 2
272.322 429: RNCC: 5 | RNVC: 9
272.322 429.EZ: RNCC: 5 | RNVC: 9

11 Nov 1997

5340-12-040-5846

5340-12-365-8315
Mounting Bracket

123658315
0006951114: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-12-357-2632
Dust And Moisture Seal Protective Plug

123572632
2410508007: RNCC: 3 | RNVC: 2
1480508038: RNCC: 5 | RNVC: 9

28 May 2002

5340-12-321-1150
Shimmy Damper

123211150
049433: RNCC: 3 | RNVC: 2
03082501110250: RNCC: 5 | RNVC: 2

28 Mar 1990

5340-12-338-8011
Mounting Plate

123388011
6700017-203610.00: RNCC: 2 | RNVC: 2
6700017-203610.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-185-0916
Lock-Release Lever

121850916
0210601503: RNCC: 3 | RNVC: 2
02106-15: RNCC: 5 | RNVC: 2
02106.15-GRAU: RNCC: 5 | RNVC: 2
144L03400: RNCC: 5 | RNVC: 2

9 Sep 1980

5340-12-301-0666
Electrical-Mechanical Equipment Post

123010666
54.0028.576.07: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-379-4496
Electronic Equipment Hardware Kit

123794496
146273: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-12-344-9787
Access Cover

123449787
14-405577: RNCC: 3 | RNVC: 2
14-405577: RNCC: 5 | RNVC: 2

16 Jan 1998

5340-12-379-3909
Window Retaining Plate

123793909
374813: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-385-4269
Mechanical Stop

123854269
07718003: RNCC: 3 | RNVC: 2
0002370035: RNCC: 5 | RNVC: 2

1 Jun 2011

5340-12-701-4764
Rod End Clevis

127014764
VG95211-ML-127014764: RNCC: 2 | RNVC: 2
5.12.5811.0522.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-191-4173
Catch Strike

121914173
02-0899-180710.01.0: RNCC: 3 | RNVC: 2
02-0899-180710-01-0: RNCC: 5 | RNVC: 9

2 Feb 1982

5340-12-318-9674
Electronic Equipment Hardware Kit

123189674
870/005-120: RNCC: 3 | RNVC: 2
870/005-120: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-301-4708
Pad Eye

123014708
2500109-190000.02.0: RNCC: 3 | RNVC: 2
2500109-190000-02-0: RNCC: 5 | RNVC: 2
2500109-190000-02-0: RNCC: 5 | RNVC: 9
2500109-190000.02.0: RNCC: 5 | RNVC: 9

18 Oct 1984

5340-12-173-8992
Electrical-Mechanical Equipment Post

121738992
L8950007: RNCC: 3 | RNVC: 2

22 May 1978

5340-12-338-5324
Retaining Strap

123385324
52.3104.200.00: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-12-332-2581
Plain Solid Disk

123322581
2410030031: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-355-9269
Nonmetallic Bumper

123559269
1002000-4000: RNCC: 2 | RNVC: 2
1002000-4000: RNCC: 3 | RNVC: 2

7 Jan 2002

5340-12-128-0257

5340-12-094-6570

5340-12-185-6692
Mending Plate

121856692
03424868: RNCC: 3 | RNVC: 2
3424868EF5091-29: RNCC: 5 | RNVC: 2

23 Oct 1980

5340-12-178-9260
Dust And Moisture Seal Protective Plug

121789260
H17: RNCC: 3 | RNVC: 2
N25-00025: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-366-8984
Mounting Bracket

123668984
TC-1664-05.020.170B: RNCC: 2 | RNVC: 2
TC-1664-05.020.170B: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-315-5438
Electrical-Mechanical Equipment Post

123155438
5803471-201350.02: RNCC: 2 | RNVC: 2
65.7789.431.02-A001: RNCC: 3 | RNVC: 2

5 Nov 1988

5340-12-168-3364
Rigid Caster

121683364
1000031-12120-04: RNCC: 2 | RNVC: 2
1000031-12120.04: RNCC: 5 | RNVC: 9

10 Mar 1977

5340-12-314-1626
Double Angle Bracket

123141626
4354267140: RNCC: 3 | RNVC: 2
435 426 71 40: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-330-7797
Plug Button

123307797
0853 1219.022: RNCC: 3 | RNVC: 2
8531219.022: RNCC: 3 | RNVC: 2

8 Feb 1993

5340-12-330-9864
Support Hook

123309864
14002003: RNCC: 3 | RNVC: 2
14002003: RNCC: 5 | RNVC: 2
14002003: RNCC: 5 | RNVC: 9

5 Mar 1993

5340-12-359-9335
Mounting Plate

123599335
2500261-187070.001.0: RNCC: 2 | RNVC: 2
2500261-187070.001.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-177-5270
Mounting Bracket

121775270
009-039.502-002: RNCC: 3 | RNVC: 2
12791-520000-002: RNCC: 5 | RNVC: 2
009-039-502-002: RNCC: 5 | RNVC: 9
12791-520000-002: RNCC: 5 | RNVC: 9
12791-520000.002: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-700-9246
Loop Clamp

127009246
VG95211-ML-127009246: RNCC: 2 | RNVC: 2
200N7-220: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-1869
Loop Clamp

121981869
RANE18-216GLATT-RANE7-216GLATT: RNCC: 3 | RNVC: 2
RANG18-216-RANG7-216: RNCC: 3 | RNVC: 2
95-75596: RNCC: 5 | RNVC: 2
RANE18-216GLATT-RANE7-216GLATT: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-361-5648
Loop Clamp

123615648
444904: RNCC: 3 | RNVC: 2
3729346: RNCC: 3 | RNVC: 2
RAC100-105-ST: RNCC: 5 | RNVC: 2
HSL105: RNCC: 5 | RNVC: 9

17 Oct 2003

5340-12-315-2696
Mounting Bracket

123152696
54.0026.047.00: RNCC: 3 | RNVC: 2

7 Oct 1988

5340-12-385-3499
Mechanic Equipment Hardware Kit

123853499
JSE0043100: RNCC: 3 | RNVC: 2
62800335: RNCC: 5 | RNVC: 2
IMT01025: RNCC: 5 | RNVC: 2

25 May 2011

5340-12-333-3069
Rigid Caster

123333069
201497: RNCC: 3 | RNVC: 2
201497: RNCC: 5 | RNVC: 2

23 Nov 1993

5340-12-304-4636
Webbing Strap

123044636
2300005-4112.00: RNCC: 2 | RNVC: 2
2300005-4112.00: RNCC: 3 | RNVC: 2
2300005-4112.00: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-12-300-8450
Pad Eye

123008450
4355510143: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-365-0714
Mounting Bracket

123650714
4618909514: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-026-9428

5340-12-356-8443
Angle Bracket

123568443
ED88-0100-01001-107: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-389-2112
Mounting Bracket

123892112
WJ200UM-01-20: RNCC: 3 | RNVC: 2
1026069-CH-10-162: RNCC: 5 | RNVC: 2
1026069-CH-10-162: RNCC: 5 | RNVC: 2

6 Jun 2012

5340-12-702-1848
Angle Bracket

127021848
VG95211-ML-127021848: RNCC: 2 | RNVC: 2
30.7206.160: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-4682
Access Door

123384682
2163-8851-080: RNCC: 3 | RNVC: 2
2163-8851-080: RNCC: 5 | RNVC: 9

14 Jul 1995

5340-12-300-7366
Loop Clamp

123007366
5801997-321000.00: RNCC: 2 | RNVC: 2
5801997-321000.00: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-303-4896
Mending Plate

123034896
6100109-2320: RNCC: 2 | RNVC: 2
6100109-2320: RNCC: 3 | RNVC: 2

27 Mar 1985

5340-12-358-9515
Retaining Strap

123589515
5801964-104000.001: RNCC: 2 | RNVC: 2
5801964-104000.001: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-360-7898
Cane Bolt

123607898
352607: RNCC: 3 | RNVC: 2
10-0076-619: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-12-316-1817
Mounting Bracket

123161817
7400001-201400.02: RNCC: 3 | RNVC: 2
7400001-201400.02: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-156-8019
Retaining Strap

121568019
300-35-24: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-373-8932
Expansion Plug

123738932
DIN470-63-ST-A3L: RNCC: 2 | RNVC: 2

17 Dec 2007

5340-12-702-7934
Support Hook

127027934
25-08301122504: RNCC: 2 | RNVC: 2

20 Dec 1995

5340-12-315-4773
Mending Plate

123154773
100314-1000.03: RNCC: 2 | RNVC: 2
100314-1000.03: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-12-181-6083
Dust And Moisture Seal Protective Cap

121816083
250/51: RNCC: 3 | RNVC: 2
GPN250/51: RNCC: 5 | RNVC: 2
13-396: RNCC: 5 | RNVC: 2
250-51: RNCC: 5 | RNVC: 9
250-51GPN250: RNCC: 5 | RNVC: 9
250051000: RNCC: 5 | RNVC: 9
51GPN250: RNCC: 5 | RNVC: 9
GPN250-51: RNCC: 5 | RNVC: 9

10 Dec 1979

5340-12-349-4059
Access Cover

123494059
590601-0207.000: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-317-4797
Bow Handle

123174797
311813787: RNCC: 3 | RNVC: 2
311813787: RNCC: 5 | RNVC: 2
311813787: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-150-8466
Retaining Strap

121508466
8330780324: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-392-3604
Pipe Hanger

123923604
I008057: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-394-6173
Bow Handle

123946173
29.20.470: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-390-8093
Access Cover

123908093
0035312081: RNCC: 3 | RNVC: 2

13 Dec 2012

5340-12-383-4636
Catch Strike

123834636
35056: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-12-334-2712
Mounting Bracket

123342712
54.0072.146.00: RNCC: 3 | RNVC: 2
54007214600: RNCC: 5 | RNVC: 9

20 Apr 1994

5340-12-168-2786
Loop Clamp

121682786
LN9491B22: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-372-5200
Dust And Moisture Seal Protective Cover

123725200
10021058: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-12-355-4032
Handle Grip

123554032
4B42703: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-189-0412
Dust And Moisture Seal Protective Plug

121890412
300V7: RNCC: 3 | RNVC: 2
GPN300V7: RNCC: 5 | RNVC: 2
301000700: RNCC: 5 | RNVC: 9
GPN300,V7: RNCC: 5 | RNVC: 9
V7: RNCC: 5 | RNVC: 9
V7GPN300: RNCC: 5 | RNVC: 9

20 Aug 1981

5340-12-330-6230
Rod End Clevis

123306230
1782503: RNCC: 3 | RNVC: 2
EZ17825: RNCC: 5 | RNVC: 9

19 Jan 1993

5340-12-339-7818
Mounting Plate

123397818
6735577: RNCC: 2 | RNVC: 2
6735577: RNCC: 3 | RNVC: 2
6535577: RNCC: 5 | RNVC: 9
6735577: RNCC: 5 | RNVC: 9

17 Jan 1996

5340-12-375-2742
Spring Holder

123752742
6703203602: RNCC: 3 | RNVC: 2

14 May 2008

5340-12-026-2726

5340-12-135-7263

5340-12-325-1708
Webbing Strap

123251708
01807-1-01258-500MM: RNCC: 3 | RNVC: 2
01807-1-01258-LE500MM: RNCC: 5 | RNVC: 2
SE01807+VE01258-LE=500MM: RNCC: 5 | RNVC: 2
79016/009-500: RNCC: 5 | RNVC: 9
DIN60060-1-50X500-C2/D5: RNCC: 5 | RNVC: 9

10 May 1991

5340-12-173-8554
Section Block Clamp

121738554
PAN4271-12: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-344-4025
Metallic Bumper

123444025
2300436-140000.001.0: RNCC: 3 | RNVC: 2

23 Oct 1997

5340-12-702-2186
Mounting Bracket

127022186
VG95211-ML-127022186: RNCC: 2 | RNVC: 2
30.7225.54: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-320-3971
Mending Plate

123203971
0223 9072: RNCC: 3 | RNVC: 2
02239072ED0150-01: RNCC: 5 | RNVC: 2
89233145: RNCC: 5 | RNVC: 2
2239072: RNCC: 5 | RNVC: 2

10 Jan 1990

5340-12-389-0990
Mounting Bracket

123890990
235-1006: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-701-9948
Loop Clamp

127019948
VG95211-ML-127019948: RNCC: 2 | RNVC: 2
155N464-583: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-186-5303
Plug Button

121865303
8701550176: RNCC: 3 | RNVC: 2

14 Jan 1981

5340-12-365-1600
Mechanic Equipment Hardware Kit

123651600
8070: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-365-1689
Dust And Moisture Seal Protective Cap-Plug

123651689
EP280-O29: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-379-5191
Access Cover

123795191
120D014650.002.0: RNCC: 2 | RNVC: 2
120D014650.002.0: RNCC: 3 | RNVC: 2
1319683: RNCC: 5 | RNVC: 2

3 Aug 2009

5340-12-371-4221
Flush Bolt

123714221
409.124 851: RNCC: 3 | RNVC: 2

27 Mar 2007

5340-12-305-3435
Nonmetallic Bumper

123053435
RP969246: RNCC: 3 | RNVC: 2

24 Oct 1985

5340-12-381-6707
Mounting Bracket

123816707
310302013H: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-12-338-6505
Butt Hinge

123386505
4303610045: RNCC: 3 | RNVC: 2

9 Aug 1995

5340-12-321-0079
Access Cover

123210079
GE5008G005: RNCC: 3 | RNVC: 2
GE5008G005: RNCC: 5 | RNVC: 9

16 Mar 1990

5340-12-316-1556
Spring Tension Clip

123161556
4609330007: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-145-9298

5340-12-310-9521
Access Cover

123109521
78203 44200: RNCC: 2 | RNVC: 2
7820344200: RNCC: 3 | RNVC: 2
78203 44200: RNCC: 5 | RNVC: 9

13 Jul 1987

5340-12-381-9162
Mounting Bracket

123819162
000605-203700.04: RNCC: 2 | RNVC: 2
000605-203700.04: RNCC: 3 | RNVC: 2
39021: RNCC: 5 | RNVC: 2

16 Apr 2010

5340-12-199-7424
Angle Bracket

121997424
5801999-633227.02: RNCC: 2 | RNVC: 2
5801999-633227.02: RNCC: 3 | RNVC: 2

26 May 1984

5340-12-196-9894
Permanent Magnet

121969894
H16: RNCC: 3 | RNVC: 2
4356897003: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-363-9883
Angle Bracket

123639883
GSERD2010.06.03.07: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-090-7303

5340-12-702-4244
Mounting Bracket

127024244
VG95211-ML-127024244: RNCC: 2 | RNVC: 2
5.12.7208.1040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-149-7752
Resilient Mount

121497752
5800603-0973.000: RNCC: 2 | RNVC: 2
835.5800603.0973.000: RNCC: 3 | RNVC: 2
7409590039: RNCC: 5 | RNVC: 2
74095 90039: RNCC: 5 | RNVC: 9
ST5800603-0973.000: RNCC: 5 | RNVC: 9
5800603-0973-000: RNCC: 5 | RNVC: 9
ST5800603-0973-000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-2949
Spring Loaded Cylinder Fastener

123652949
GN617-6-AK-NI: RNCC: 3 | RNVC: 2

16 Dec 2004

5340-12-151-4429
Electrical-Mechanical Equipment Post

121514429
23111-3602.09: RNCC: 2 | RNVC: 2
23111-3602.09: RNCC: 3 | RNVC: 2
23111-3602-09: RNCC: 5 | RNVC: 2
23111-3602-09: RNCC: 5 | RNVC: 9
23111-3602.09: RNCC: 5 | RNVC: 9
23111-3602-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5183
Retaining Strap

127025183
VG95211-ML-127025183: RNCC: 2 | RNVC: 2
5.51.6501.1722.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3466
Mounting Bracket

127013466
VG95211-ML-127013466: RNCC: 2 | RNVC: 2
5.12.5111.3633.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-1281
Angle Bracket

123011281
A-243799-012: RNCC: 3 | RNVC: 2
A243799-012: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-320-3996
Mounting Bracket

123203996
P-296828-010: RNCC: 3 | RNVC: 2
P296828-010: RNCC: 5 | RNVC: 2

11 Jan 1990

5340-12-306-6632
Mending Plate

123066632
704-144100-911-0: RNCC: 3 | RNVC: 2
704-144100-911-0: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-12-310-0594
Mending Plate

123100594
P-896288-003: RNCC: 3 | RNVC: 2
P896288-003: RNCC: 5 | RNVC: 2

2 Apr 1987

5340-12-151-1373
Angle Bracket

121511373
521A07002: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-368-3705
Angle Bracket

123683705
5621500773: RNCC: 3 | RNVC: 2
562 150 0773: RNCC: 5 | RNVC: 2

28 Feb 2006

5340-12-315-7130
Angle Bracket

123157130
81974860719: RNCC: 3 | RNVC: 2
81.97486.0719: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-333-5145
Spring Tension Clip

123335145
0019883178: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-020-7424

5340-12-387-0598
Pipe Hanger

123870598
58180558: RNCC: 3 | RNVC: 2
58180558: RNCC: 5 | RNVC: 2
CV192108: RNCC: 5 | RNVC: 2

2 Nov 2011

5340-12-194-5868
Door Closer

121945868
41-42-200-515-700N: RNCC: 3 | RNVC: 2
41-42-200-515/700N794: RNCC: 5 | RNVC: 9

18 Nov 1982

5340-12-702-5509
Angle Bracket

127025509
VG95211-ML-127025509: RNCC: 2 | RNVC: 2
5.51.7215.0070.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-150-6317
Loop Clamp

121506317
G11TAN15802-0: RNCC: 3 | RNVC: 2
G11TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-192-6779
Shimmy Damper

121926779
4605040012: RNCC: 3 | RNVC: 2
1312-73: RNCC: 5 | RNVC: 2
721 1 17 037 1: RNCC: 5 | RNVC: 9

17 May 1982

5340-12-308-2919
Pad Eye

123082919
P-875193-007: RNCC: 3 | RNVC: 2
P875193-007: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-341-9502
Resilient Mount

123419502
DIN95369-A1-6-M8-CR-ST: RNCC: 2 | RNVC: 2
151001-M8-CR.ST-70: RNCC: 5 | RNVC: 2
151001-M8-CR.ST-70: RNCC: 5 | RNVC: 2
C1050-M8: RNCC: 5 | RNVC: 2
VG95369-A1-3-M8-CR-ST: RNCC: 5 | RNVC: 9
C1050-M8: RNCC: 5 | RNVC: 9

20 Nov 1996

5340-12-199-1169
Angle Bracket

121991169
A-920267-003: RNCC: 3 | RNVC: 2
A920267-003: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-301-1946
Access Cover

123011946
TK-BA35-5340-351: RNCC: 2 | RNVC: 2
M0423 5670: RNCC: 3 | RNVC: 2
1423-960.08(4): RNCC: 5 | RNVC: 9

27 Sep 1984

5340-12-321-9429
Metal Runner

123219429
702-241500-953-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-175-3061
Loop Clamp

121753061
RS0.8120.70/20D: RNCC: 3 | RNVC: 2
4608120070: RNCC: 5 | RNVC: 2
RS0-8120-070-20D: RNCC: 5 | RNVC: 2
RS0-8120-70-20D: RNCC: 5 | RNVC: 2
RS0.8120-070/20D: RNCC: 5 | RNVC: 2
909620351: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-323-8487
Spring Loaded Cylinder Fastener

123238487
2300123-000011.000.0: RNCC: 2 | RNVC: 2
2300123-000011.000.0: RNCC: 3 | RNVC: 2
2300123-000011.000.0: RNCC: 3 | RNVC: 2
790-00.40.001-17E: RNCC: 5 | RNVC: 2

27 Dec 1990

5340-12-360-2110
Door Button

123602110
NO PRIMARY REF 12-360-2110: RNCC: 3 | RNVC: 2
81971206014: RNCC: 5 | RNVC: 2

17 Apr 2003

5340-12-183-7753
Butt Hinge Leaf

121837753
181831405A: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-348-6821
Access Cover

123486821
181705405: RNCC: 2 | RNVC: 2
181705405: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-199-5371
Mending Plate

121995371
0954118000: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-355-3670
Webbing Strap

123553670
1666398: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-12-185-1627
Friction Catch

121851627
4090-50X9: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-12-314-0975
Metal Runner

123140975
272.301 840: RNCC: 2 | RNVC: 2
272.301.840: RNCC: 3 | RNVC: 2
272.301 840: RNCC: 5 | RNVC: 9

7 Jun 1988

5340-12-303-9479
Rim Lock

123039479
4047600050: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-375-5560
Angle Bracket

123755560
L258M2854101: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-12-311-2260
Handle Grip

123112260
AGS50739: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-12-366-6057
Nonmetallic Bumper

123666057
GF46/79 QUALITAET1/2150: RNCC: 3 | RNVC: 2
4633170012: RNCC: 5 | RNVC: 2

12 May 2005

5340-12-313-2013
Access Hole Frame

123132013
42329/1020-03: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-12-170-0508
Angle Bracket

121700508
231-797: RNCC: 3 | RNVC: 2
2303-0000-1201: RNCC: 5 | RNVC: 2

22 Jun 1977

5340-12-168-7574
Butt Hinge

121687574
1400003-13072-00: RNCC: 3 | RNVC: 2

6 Apr 1977

5340-12-388-2767
Mounting Plate

123882767
F1.1697-00-01-13.00-08: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-12-391-5119
Loop Clamp

123915119
DIN3015-LE-2R-15-PP-W5: RNCC: 2 | RNVC: 2

15 Mar 2013

5340-12-350-4459
Section Block Clamp

123504459
J29120358-001: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-167-9642
Nonmetallic Bumper

121679642
78303: RNCC: 3 | RNVC: 2
52150998: RNCC: 5 | RNVC: 9

7 Feb 1977

5340-12-306-7210
Retaining Strap

123067210
1014161: RNCC: 3 | RNVC: 2
014367: RNCC: 5 | RNVC: 2

24 Mar 1986

5340-12-378-3639
Mounting Plate

123783639
41046300: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-356-7548
Runner

123567548
2125-131210.04B: RNCC: 2 | RNVC: 2
2125-131210.04B: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-155-2527
Butt Hinge Leaf

121552527
160-25542-25: RNCC: 3 | RNVC: 2
160-25542-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-7043
Manual Control Lever

123567043
33036-003-015: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-381-0031
Webbing Strap

123810031
320.001-124: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-12-333-2210
Mending Plate

123332210
590860-0018.000: RNCC: 2 | RNVC: 2
590860-0018.000: RNCC: 3 | RNVC: 2

11 Nov 1993

5340-12-702-6376
Mounting Bracket

127026376
VG95211-ML-127026376: RNCC: 2 | RNVC: 2
84.5800.170: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-173-4509
Butt Hinge Leaf

121734509
EL1301-250-157: RNCC: 3 | RNVC: 2

18 Apr 1978

5340-12-352-8132
Angle Bracket

123528132
5400049-128300.04: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-12-316-8303
Access Cover

123168303
5803596-3000.01: RNCC: 2 | RNVC: 2
5803596-3000.01: RNCC: 3 | RNVC: 2
5803596-3000.01: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-337-4196
Helical Compression Spring Seat

123374196
01242401: RNCC: 3 | RNVC: 2
01242401.873: RNCC: 5 | RNVC: 2

1 Mar 1995

5340-12-333-5719
Support Hook

123335719
6151801: RNCC: 3 | RNVC: 2

6 Jan 1994

5340-12-311-5781
Cremone Bolt

123115781
100000060: RNCC: 2 | RNVC: 2
331282: RNCC: 3 | RNVC: 2
10 0000 060: RNCC: 5 | RNVC: 2
00 0000 945: RNCC: 5 | RNVC: 2
100000060: RNCC: 5 | RNVC: 2

21 Sep 1987

5340-12-352-5864
Spacing Threaded Standoff

123525864
18H2026: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-317-4810
Mounting Plate

123174810
6375394: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-12-011-0453

5340-12-350-8910
Angle Bracket

123508910
J53223376-001: RNCC: 3 | RNVC: 2

31 May 2000

5340-12-346-9486
Webbing Strap

123469486
588.00-009000-130: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-12-363-4689
Angle Bracket

123634689
J28130095-003: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-190-6836
Electrical-Mechanical Equipment Post

121906836
NO PRIMARY REF 12-190-6836: RNCC: 3 | RNVC: 2
7801136911: RNCC: 5 | RNVC: 9
7801 136911: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-175-0165
Hasp Staple

121750165
44-25743: RNCC: 3 | RNVC: 2

16 Aug 1978

5340-12-185-0008
Platte

121850008
F01-212310-03-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-178-9097
Mending Plate

121789097
5561487/4: RNCC: 3 | RNVC: 2
5561487-4: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-195-6587
Loop Clamp

121956587
DIN3016-1-A1-12X12-W5: RNCC: 2 | RNVC: 2
RS1.12/12-W5: RNCC: 3 | RNVC: 2
DIN3016-A1-12X12-W5: RNCC: 3 | RNVC: 2
RS1100-12-12-1-4571: RNCC: 5 | RNVC: 2
4110712012: RNCC: 5 | RNVC: 2
RS1.12/12-1.4571: RNCC: 5 | RNVC: 2
VG95931-A12X12-1.4571: RNCC: 5 | RNVC: 9
DIN3016-A1-12X12-W5: RNCC: 5 | RNVC: 9
VG95931-A12X12-W5: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-321-0310
Access Cover

123210310
2654-335160.01: RNCC: 2 | RNVC: 2
2654-335160.01: RNCC: 3 | RNVC: 2
2654-335 160.01: RNCC: 5 | RNVC: 9
679-06010600.01: RNCC: 5 | RNVC: 9
679-06010600.01: RNCC: 5 | RNVC: 9

19 Mar 1990

5340-12-177-3787
Nonmetallic Bumper

121773787
105-22705.15: RNCC: 3 | RNVC: 2
105-22705-15: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-195-6966
Friction Catch

121956966
5800043-1990: RNCC: 2 | RNVC: 2
5800043-1990: RNCC: 3 | RNVC: 2
5800043-1990.00: RNCC: 5 | RNVC: 2
5800043-1990.00: RNCC: 5 | RNVC: 9
5800043-1990.00: RNCC: 5 | RNVC: 9
5800043-1990-00: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-343-7221
Angle Bracket

123437221
23302-182500.06: RNCC: 2 | RNVC: 2
2609256: RNCC: 3 | RNVC: 2
WRYUG2030: RNCC: 3 | RNVC: 2
99702609256: RNCC: 5 | RNVC: 2

17 Jul 1997

5340-12-375-7675
Bumper

123757675
5530780038: RNCC: 3 | RNVC: 2

3 Jul 2008

5340-12-359-4710
Access Cover

123594710
3270150504: RNCC: 3 | RNVC: 2

7 Feb 2003

5340-12-359-6873
Mounting Bracket

123596873
9454291340: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-379-8111
Dust And Moisture Seal Protective Plug

123798111
05756845: RNCC: 3 | RNVC: 2
05756845: RNCC: 5 | RNVC: 2
CV168863: RNCC: 5 | RNVC: 2

3 Sep 2009

5340-12-379-9483
Mounting Bracket

123799483
96500048: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-372-9682
Angle Bracket

123729682
L632M1008101: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-12-151-1252
Retaining Strap

121511252
121G08019: RNCC: 3 | RNVC: 2
8209952925: RNCC: 5 | RNVC: 2
121G08019E1: RNCC: 5 | RNVC: 2
28209952925E0: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-351-0525
Multiple Angle Bracket

123510525
4376160114: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-359-2348
Retaining Strap

123592348
9424920640: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-302-6543
Angle Bracket

123026543
1017400: RNCC: 3 | RNVC: 2
017400: RNCC: 5 | RNVC: 9

21 Jan 1985

5340-12-365-9423
Mounting Bracket

123659423
9305030340: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-12-309-3251
Mending Plate

123093251
1000104-104000.03: RNCC: 2 | RNVC: 2
1000104-104000.03: RNCC: 5 | RNVC: 9

15 Jan 1987

5340-12-391-2796
Clamp Bolt Assembly

123912796
I000295: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-12-379-9753
Lock-Release Lever

123799753
58290287: RNCC: 3 | RNVC: 2
CV169192: RNCC: 5 | RNVC: 2
58290287: RNCC: 5 | RNVC: 2

16 Sep 2009

5340-12-188-8768
Helical Compression Spring Seat

121888768
0289 1131: RNCC: 3 | RNVC: 2
2891131: RNCC: 5 | RNVC: 2
2891131EE0704-51: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-12-123-8102
Retaining Clip

121238102
111109425: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-388-7332
Mortise Bolt

123887332
11302: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-12-303-9923
Electrical-Mechanical Equipment Post

123039923
8450050008: RNCC: 3 | RNVC: 2
84500 50008: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-388-1637
Spacing Threaded Standoff

123881637
9140004055ENG: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-022-9428

5340-12-040-1035

5340-12-366-8980
Nonmetallic Bumper

123668980
STTC-1664-02.010.040A: RNCC: 2 | RNVC: 2
STTC-1664-02.010.040A: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-363-8497
Angle Bracket

123638497
J92226427-003: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-343-1676
Loop Clamp

123431676
588.20-000001-001: RNCC: 3 | RNVC: 2

13 May 1997

5340-12-307-3275
Angle Bracket

123073275
0335 7466: RNCC: 3 | RNVC: 2
3357466EE0141-15: RNCC: 5 | RNVC: 2
0141-15-13-12: RNCC: 5 | RNVC: 2
3357466: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-12-302-6299
Retaining Strap

123026299
5801101-21.006: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-378-9399
Mechanic Equipment Hardware Kit

123789399
E36216-00: RNCC: 3 | RNVC: 2
E36216-00: RNCC: 5 | RNVC: 2

2 Jun 2009

5340-12-347-5741
Webbing Strap

123475741
5803688-102010.00: RNCC: 2 | RNVC: 2
5803688-102010.00: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-345-9798
Dust And Moisture Seal Protective Plug

123459798
C42121-Z78-C47: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-357-1697
Mounting Bracket

123571697
0069884278: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-323-7366
Lock-Release Lever

123237366
9000 8139: RNCC: 3 | RNVC: 2

12 Dec 1990

5340-12-315-2947
Pipe Bracket

123152947
811971849: RNCC: 3 | RNVC: 2
811971849: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-701-7670
Angle Bracket

127017670
VG95211-ML-127017670: RNCC: 2 | RNVC: 2
5.12.7702.0500.54: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-5817
Retaining Strap

123055817
100332-019410.01: RNCC: 2 | RNVC: 2
100332-019410.01: RNCC: 3 | RNVC: 2

25 Nov 1985

5340-12-152-5325
Spring Tension Clip

121525325
162318401: RNCC: 3 | RNVC: 2
E7101-22-03-02: RNCC: 3 | RNVC: 2
7101-22-03-02: RNCC: 5 | RNVC: 2
7101-22-03.02: RNCC: 5 | RNVC: 2
7101-22-03.02: RNCC: 5 | RNVC: 9
E7101-22-03-02: RNCC: 5 | RNVC: 9
7101-22-03-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-3320
Mending Plate

123083320
553-23000.000: RNCC: 3 | RNVC: 2

29 Sep 1986

5340-12-171-7695
Nonmetallic Bumper

121717695
490126-22404-07: RNCC: 3 | RNVC: 2
895372: RNCC: 5 | RNVC: 2

11 Nov 1977

5340-12-193-9479
Sealing Plug Assembly

121939479
160-736900.04: RNCC: 3 | RNVC: 2
160-736900-04: RNCC: 5 | RNVC: 2
160-736900.04: RNCC: 5 | RNVC: 9

16 Sep 1982

5340-12-302-7955
Rod End Clevis

123027955
NO PRIMARY REF 12-302-7955: RNCC: 3 | RNVC: 2
DIN71751-A8X32-A3P: RNCC: 5 | RNVC: 9
100200086002/001: RNCC: 5 | RNVC: 9
100200086002/024: RNCC: 5 | RNVC: 9
DIN71751-A8X32: RNCC: 5 | RNVC: 9
DIN71751-A8X32-A3P: RNCC: 5 | RNVC: 9
A8X32DIN71751ST: RNCC: 5 | RNVC: 9
DIN71751-A8X32: RNCC: 5 | RNVC: 9
DIN71751-A8X32-A3P: RNCC: 5 | RNVC: 9
DIN71751-A8X32: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-150-8862
Retaining Strap

121508862
100298-300.01: RNCC: 2 | RNVC: 2
100298-300.01: RNCC: 3 | RNVC: 2
100298-300-01: RNCC: 3 | RNVC: 2
100298-300.01: RNCC: 5 | RNVC: 9
100298-300.01: RNCC: 5 | RNVC: 9
100298-300-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-4199
Angle Bracket

123174199
P-145502-023: RNCC: 3 | RNVC: 2
P145502-023: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-702-4785
Mounting Bracket

127024785
VG95211-ML-127024785: RNCC: 2 | RNVC: 2
5.51.0605.0504.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-197-0641
Resilient Mount

121970641
251501131A: RNCC: 3 | RNVC: 9

14 Sep 1983

5340-12-373-3543
Access Cover

123733543
L524M2017101: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-12-122-5431
Druck- Manschette

5340-12-121-7648
Krampe Mit Platte

5340-12-123-9015
Gurt

5340-12-360-3718
Loop Clamp

123603718
0009552278: RNCC: 3 | RNVC: 2
0009552278: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-198-3299
Retaining Strap

121983299
4139 306 303: RNCC: 3 | RNVC: 2
4139306303: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-369-4349
Padlock

123694349
235Z/60: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-12-359-8278
Helical Compression Spring Retainer

123598278
300.022.229: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-195-5405
Loop Clamp

121955405
311251269: RNCC: 3 | RNVC: 9

9 Mar 1983

5340-12-363-5819
Mounting Plate

123635819
BRR22257: RNCC: 3 | RNVC: 2

6 Jul 2004

5340-12-332-6290
Retaining Strap

123326290
81254410354: RNCC: 2 | RNVC: 2
81254410354: RNCC: 3 | RNVC: 2
81.25441.0354: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-312-2518
Extension Drawer Slide

123122518
1179799: RNCC: 3 | RNVC: 2
97C9.829.01: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-12-319-6666
Sash Pulley

123196666
M522110: RNCC: 3 | RNVC: 9
M522110: RNCC: 5 | RNVC: 2

24 Oct 1989

5340-12-309-7933
Access Cover

123097933
6126224: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-366-7956
Access Hole Frame

123667956
81651300001: RNCC: 3 | RNVC: 2
81.65130-0001: RNCC: 5 | RNVC: 2

8 Jun 2005

5340-12-163-3422
Helical Compression Spring Seat

121633422
3420120002: RNCC: 3 | RNVC: 2
0003015143: RNCC: 5 | RNVC: 2
WMS2218-505X: RNCC: 5 | RNVC: 2
0003015093: RNCC: 5 | RNVC: 2
3015143: RNCC: 5 | RNVC: 9
3015093: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-2758
Mending Plate

127002758
51-270441054: RNCC: 2 | RNVC: 2
765-65-SB280: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-12-326-7868
Butt Hinge Leaf

123267868
279.826 685: RNCC: 3 | RNVC: 2
1392253-330007.006: RNCC: 5 | RNVC: 9

24 Oct 1991

5340-12-140-8946
Resilient Mount

121408946
9GP 099 030-00: RNCC: 3 | RNVC: 2
099030-00: RNCC: 5 | RNVC: 2
9GP099030-00: RNCC: 5 | RNVC: 9
A99030: RNCC: 5 | RNVC: 9
Z707-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-7203
Mounting Bracket

121907203
NO PRIMARY REF 12-190-7203: RNCC: 3 | RNVC: 2
7631 137287: RNCC: 5 | RNVC: 9
7631137287: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-338-8872
Mending Plate

123388872
4900319-302000.01: RNCC: 2 | RNVC: 2
4900319-302000.01: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-385-0820
Rod End Clevis

123850820
F1.4351-00-20-20.00-02: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-12-358-6053
Mounting Bracket

123586053
VR-B11-0062-005: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-322-1915
Dust And Moisture Seal Protective Cap

123221915
246504: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-12-023-0706

5340-12-302-0826
Retaining Strap

123020826
3875460344: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-137-1055

5340-12-132-9041

5340-12-194-0315
Loop Clamp

121940315
3641550028: RNCC: 3 | RNVC: 2
A3141550528: RNCC: 5 | RNVC: 2
A3141550528: RNCC: 5 | RNVC: 2
3141550528: RNCC: 5 | RNVC: 2

27 Sep 1982

5340-12-358-7361
Buckle

123587361
P20595NM: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-312-0503
Shimmy Damper

123120503
082643: RNCC: 3 | RNVC: 2

13 Nov 1987

5340-12-335-0745
Mounting Bracket

123350745
0048-200000A20B: RNCC: 2 | RNVC: 2
0048-200000A20B: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-12-375-7872
Access Cover

123757872
03-130823/0: RNCC: 3 | RNVC: 2
03-130823/0: RNCC: 5 | RNVC: 9

3 Jul 2008

5340-12-307-2336
Retaining Strap

123072336
140-821000-901-0: RNCC: 3 | RNVC: 2

23 May 1986

5340-12-348-2527
Mounting Bracket

123482527
1682-180040.000.0: RNCC: 2 | RNVC: 2
1682-180040.000.0: RNCC: 3 | RNVC: 2

17 May 1999

5340-12-331-8163
Mechanical Stop

123318163
2300304.000000.000.0-1: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-194-2114
Strap Hinge

121942114
5549523: RNCC: 3 | RNVC: 2
554.9523: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-317-8385
Flush Catch Claw

123178385
7163501: RNCC: 3 | RNVC: 2

18 May 1989

5340-12-385-4395
Angle Bracket

123854395
5501311241: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-374-2968
Retaining Strap

123742968
5324443: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-379-9106
Angle Bracket

123799106
58060100: RNCC: 3 | RNVC: 2
CV169092: RNCC: 5 | RNVC: 2
58060100: RNCC: 5 | RNVC: 2

11 Sep 2009

5340-12-352-5710
Mechanical Stop

123525710
15001: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-340-7217
Barrel Bolt

123407217
138895: RNCC: 3 | RNVC: 2

30 May 1996

5340-12-344-2340
Angle Bracket

123442340
1227 9820: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-354-8292
Mounting Bracket

123548292
2300279-4508.00: RNCC: 2 | RNVC: 2
2300279-4508.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-305-4580
Key Blank

123054580
6014710093: RNCC: 3 | RNVC: 2

8 Nov 1985

5340-12-330-1808
Dust And Moisture Seal Boot

123301808
4616710636: RNCC: 3 | RNVC: 2

11 Nov 1992

5340-12-192-2240
Retaining Strap

121922240
8339950420: RNCC: 3 | RNVC: 2

1 Apr 1982

5340-12-179-8092
Retaining Strap

121798092
81429020015: RNCC: 3 | RNVC: 2

1 Aug 1979

5340-12-301-2639
Flush Catch Claw

123012639
4178778: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-12-386-0513
Clamping Catch Fastener

123860513
896258: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-12-094-4369

5340-12-094-9187

5340-12-028-4847

5340-12-361-3344
Mounting Bracket

123613344
51125400241: RNCC: 3 | RNVC: 2
51.12540-0241: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-355-5285
Access Cover

123555285
2125-025210.25B: RNCC: 2 | RNVC: 2
2125-025210.25B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-199-7545
Buckle

121997545
1300391-000000.06: RNCC: 2 | RNVC: 2
49.005.00000.06E: RNCC: 3 | RNVC: 2

26 May 1984

5340-12-121-0266
Rod End Clevis

121210266
81954200005: RNCC: 3 | RNVC: 2
00003702326: RNCC: 5 | RNVC: 2
G2326: RNCC: 5 | RNVC: 2
00.00370-2326: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-004-0170

5340-12-004-3438

5340-12-191-8498
Retaining Strap

121918498
02522566: RNCC: 3 | RNVC: 2
2522566EE5017-90: RNCC: 5 | RNVC: 2

15 Mar 1982

5340-12-392-8710
Mounting Bracket

123928710
L133M6201209: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-383-7757
Double Angle Bracket

123837757
867012209: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-309-8079
Nut And Bolt Locking Plate

123098079
3229940025: RNCC: 3 | RNVC: 2

4 Mar 1987

5340-12-301-6090
Mending Plate

123016090
2300107-500000.16: RNCC: 2 | RNVC: 2
2300107-500000.16: RNCC: 3 | RNVC: 2
2300107-500000.16: RNCC: 5 | RNVC: 9
2300107-500000.16: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-346-1697
Mounting Bracket

123461697
4209619065: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-12-393-3422
Handle Ferrule

123933422
4188691: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-365-1249
Manual Control Lever

123651249
1108870127: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-389-3825
Dust And Moisture Seal Protective Cap

123893825
32321-51: RNCC: 3 | RNVC: 2

28 Jun 2012

5340-12-376-2230
Butt Hinge

123762230
10065005: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-12-194-4103
Slide Keeper

121944103
281827161: RNCC: 3 | RNVC: 2

3 Nov 1982

5340-12-348-8547
Dust And Moisture Seal Protective Cover

123488547
2300387-660900.003: RNCC: 2 | RNVC: 2
2300387-660900.003: RNCC: 3 | RNVC: 2
2300387-660900.003: RNCC: 5 | RNVC: 9

27 Aug 1999

5340-12-394-1336
Mounting Plate

123941336
11.28044-1132: RNCC: 3 | RNVC: 2
11.28044-1132: RNCC: 5 | RNVC: 2

6 Nov 2013

5340-12-308-1317
Padlock

123081317
234 40 MM BUEGEL: RNCC: 3 | RNVC: 9
234: RNCC: 5 | RNVC: 9

4 Sep 1986

5340-12-388-4182
Dust And Moisture Seal Protective Cover

123884182
011303: RNCC: 3 | RNVC: 2

21 Mar 2012

5340-12-381-6680
Access Cover

123816680
311102002H: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-12-365-7588
Mounting Bracket

123657588
5161-233120B01B: RNCC: 2 | RNVC: 2
5161-233120B01B: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-302-0967
Bow Handle

123020967
9835447: RNCC: 3 | RNVC: 2
2300164-291410.000: RNCC: 5 | RNVC: 9
9835447: RNCC: 5 | RNVC: 9
2300164-291410-000: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-12-379-8914
Manual Control Lever

123798914
242-4924-14-00-00: RNCC: 3 | RNVC: 2

10 Sep 2009

5340-12-172-5708
Access Cover

121725708
30-79350-0188: RNCC: 3 | RNVC: 2

30 Jan 1978

5340-12-702-8507
Rod End Connector

127028507
52-04066101317: RNCC: 2 | RNVC: 2

3 Jan 1996

5340-12-701-8467
Loop Clamp

127018467
VG95211-ML-127018467: RNCC: 2 | RNVC: 2
5156A-14: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-7973
Mending Plate

121977973
1121-98251W2.08: RNCC: 3 | RNVC: 2

23 Nov 1983

5340-12-094-5563

5340-12-184-3616
Nonmetallic Bumper

121843616
V22411E6630S11: RNCC: 3 | RNVC: 2
V22411-E6630-S11: RNCC: 5 | RNVC: 2
C22234-A7-C115: RNCC: 5 | RNVC: 2
C22234A7C115: RNCC: 5 | RNVC: 2
173-58032-01: RNCC: 5 | RNVC: 2

19 Jul 1980

5340-12-305-2171
Dust And Moisture Seal Protective Cap-Plug

123052171
5135039: RNCC: 3 | RNVC: 2
5135-039: RNCC: 5 | RNVC: 2

9 Oct 1985

5340-12-146-0916
Resilient Mount

121460916
510030-M8X33.NR65.ST: RNCC: 3 | RNVC: 2
30391950102: RNCC: 3 | RNVC: 9
DIN95363-B40X20-M8X33-NR65ST: RNCC: 4 | RNVC: 1
30391950102000: RNCC: 5 | RNVC: 9
VG95363-B40X20-M8X33-NR65ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-174-7620
Rod End Clevis

121747620
DIN71752-G6X12-9SMN28K-A2P: RNCC: 2 | RNVC: 2
DIN71752-G6X12-9SMNPB28K-A2P: RNCC: 2 | RNVC: 2
DIN71752-G6X12-A2P: RNCC: 2 | RNVC: 2
DIN71752-G6X12-A2P: RNCC: 3 | RNVC: 2
100200060012/023: RNCC: 3 | RNVC: 2
DIN71752-G6X12-A2P: RNCC: 3 | RNVC: 2
G6X12DIN71752-9S20K: RNCC: 5 | RNVC: 2
G6X12DIN71752-9SMNPB28K: RNCC: 5 | RNVC: 2
G6X12DIN71752: RNCC: 5 | RNVC: 9
1002006012: RNCC: 5 | RNVC: 9

1 Aug 1978

5340-12-389-7312
Rod End Clevis

123897312
DIN71752-G4X16-10S20K: RNCC: 2 | RNVC: 2
071752004003: RNCC: 3 | RNVC: 2
DBL8451.22: RNCC: 5 | RNVC: 2

17 Aug 2012

5340-12-157-1796
Resilient Mount

121571796
1206018000: RNCC: 3 | RNVC: 2
DRUCK-ZUG,DZV-440,D2: RNCC: 5 | RNVC: 2
VBE424-47: RNCC: 5 | RNVC: 2
D2: RNCC: 5 | RNVC: 9
DRUCK-ZUG,INDEX DZV-440: RNCC: 5 | RNVC: 9
DVZ440: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-9992
Belt-Strap Keeper

123799992
601241-302500.00: RNCC: 2 | RNVC: 2
601241-302500.00: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-198-0556
Retaining Strap

121980556
8100146-2000-04: RNCC: 2 | RNVC: 2
16205-146-2000-04: RNCC: 3 | RNVC: 2

15 Dec 1983

5340-12-342-2732
Helical Compression Spring Seat

123422732
421364 442 22 34 00: RNCC: 3 | RNVC: 2
P36288-45W: RNCC: 5 | RNVC: 2
W36288-45: RNCC: 5 | RNVC: 2
W3628845: RNCC: 5 | RNVC: 2

14 Jan 1997

5340-12-184-7857
Metal Runner

121847857
5801392-1011-006: RNCC: 3 | RNVC: 2
5801392-1011.006: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-360-3243
Mounting Plate

123603243
3511160812: RNCC: 3 | RNVC: 2
3511160812: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-091-0890

5340-12-094-6984

5340-12-360-2984
Loop Clamp

123602984
0009313900: RNCC: 3 | RNVC: 2
0009313900: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-004-3880

5340-12-004-0053

5340-12-380-7021
Bumper

123807021
503144: RNCC: 3 | RNVC: 2

20 Nov 2009

5340-12-311-2421
Electrical-Mechanical Equipment Post

123112421
AFG002441: RNCC: 3 | RNVC: 2

7 Aug 1987

5340-12-360-0968
Mounting Plate

123600968
9418810160: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-381-1634
Webbing Strap

123811634
1284730: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-12-307-2578
Helical Compression Spring Seat

123072578
03393010: RNCC: 3 | RNVC: 2

27 May 1986

5340-12-183-1034
Mounting Bracket

121831034
42022211: RNCC: 3 | RNVC: 2
42022211EZ5048-75: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-324-0619
Metal Runner

123240619
0069877025: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-12-358-8914
Mounting Bracket

123588914
3835040040: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-196-4577
Electrical-Mechanical Equipment Post

121964577
18H310: RNCC: 3 | RNVC: 2

11 Jul 1983

5340-12-326-4403
Access Door

123264403
3097502102: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-329-0517
Dust And Moisture Seal Protective Cap

123290517
MP4/SK: RNCC: 3 | RNVC: 9
MP4/SK: RNCC: 5 | RNVC: 2

14 Jul 1992

5340-12-121-7273
Auf Band- Schelle

5340-12-197-7659
Angle Bracket

121977659
A-145401-032: RNCC: 3 | RNVC: 2
A145401-032: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-305-1957
Angle Bracket

123051957
5801763-070000.002: RNCC: 2 | RNVC: 2
5801763-070000.002: RNCC: 3 | RNVC: 2

4 Oct 1985

5340-12-151-4961
Spring Loaded Cylinder Fastener

121514961
23111-4025.00: RNCC: 2 | RNVC: 2
602K0589: RNCC: 3 | RNVC: 2
23111-4025.00: RNCC: 3 | RNVC: 2
23111-4025-00: RNCC: 5 | RNVC: 2
23111-4025-00: RNCC: 5 | RNVC: 9
23111-4025.00: RNCC: 5 | RNVC: 9
1122071: RNCC: 5 | RNVC: 9
23111-4025-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-151-8158
Mending Plate

121518158
BD7001T961: RNCC: 3 | RNVC: 2
BD7001T961: RNCC: 3 | RNVC: 9
1292001-000141-961: RNCC: 5 | RNVC: 9
1292001-000141.961: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-8380
Mending Plate

123298380
590860-0017.000: RNCC: 3 | RNVC: 2

6 Oct 1992

5340-12-163-5651
Loop Clamp

121635651
LN9490BM32: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-180-6637
Access Cover

121806637
0287 6872: RNCC: 3 | RNVC: 2
2876872: RNCC: 5 | RNVC: 2
2876872ED0704-78: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-040-2030

5340-12-302-1848
Retaining Strap

123021848
6175010320: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-318-7978
Spring Tension Clip

123187978
04158639: RNCC: 3 | RNVC: 2
04158639EE5516-34: RNCC: 5 | RNVC: 2

17 Aug 1989

5340-12-316-7125
Mounting Bracket

123167125
4090119: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-319-4798
Mounting Bracket

123194798
504541: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-026-9928

5340-12-044-3806

5340-12-095-0288

5340-12-155-1120
Rod End Connector

121551120
160-24765-60: RNCC: 3 | RNVC: 2
160-24765-60: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-9624
Manual Control Handle

123489624
34362-2: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-12-348-0677
Angle Bracket

123480677
58R059-84419-2: RNCC: 2 | RNVC: 2
58R059-84419-2: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-352-9422
Helical Compression Spring Retainer

123529422
D343: RNCC: 3 | RNVC: 2
543031009206: RNCC: 5 | RNVC: 2
543031009218: RNCC: 5 | RNVC: 2

10 Jan 2001

Load More Results