What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 84 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 84 of 178

5340-12-364-4494
Multiple Angle Bracket

123644494
54.1105.200.01: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-159-8051
Nut And Bolt Locking Plate

121598051
0730 749 066: RNCC: 3 | RNVC: 2
0730749066: RNCC: 5 | RNVC: 2
0730749066: RNCC: 5 | RNVC: 9
100CP0478: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-348-6400
Angle Bracket

123486400
NN31197P01: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-12-331-1852
Flush Lock

123311852
225.13.711: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-12-171-2099

5340-12-365-1541
Spring Tension Clip

123651541
18 400.678: RNCC: 3 | RNVC: 2
6119950265: RNCC: 5 | RNVC: 2

2 Dec 2004

5340-12-366-8137
Thumb Latch

123668137
SACS11905: RNCC: 3 | RNVC: 2
T524M00T0003: RNCC: 5 | RNVC: 2

13 Jun 2005

5340-12-346-6102
Mending Plate

123466102
2930.1200: RNCC: 3 | RNVC: 2

17 Aug 1998

5340-12-312-3510
Retaining Strap

123123510
071555060500: RNCC: 3 | RNVC: 9

18 Dec 1987

5340-12-360-8914
Mounting Bracket

123608914
P70158200008: RNCC: 2 | RNVC: 2
P70158200008: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-351-7530
Retaining Strap

123517530
2300387-700250.001: RNCC: 2 | RNVC: 2
9907437: RNCC: 3 | RNVC: 2
2300387-700250.001: RNCC: 5 | RNVC: 9
9907437: RNCC: 5 | RNVC: 9

18 Aug 2000

5340-12-362-2846
Loop Clamp

123622846
LN9490BM19: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-379-4490
Webbing Strap

123794490
2011046: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-12-336-5474
Dust And Moisture Seal Protective Plug

123365474
11256477002: RNCC: 3 | RNVC: 2
1125 647 7002: RNCC: 5 | RNVC: 2

24 Nov 1994

5340-12-336-0263
Multiple Angle Bracket

123360263
1680318000: RNCC: 3 | RNVC: 2

13 Oct 1994

5340-12-092-0920

5340-12-349-8861
Angle Bracket

123498861
A1Z10283523: RNCC: 2 | RNVC: 2
A1Z10283523: RNCC: 3 | RNVC: 2
20361029: RNCC: 5 | RNVC: 2

20 Jan 2000

5340-12-198-5013
Loop Clamp

121985013
160-744720: RNCC: 3 | RNVC: 2
160-744720: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-198-4143
Nonmetallic Bumper

121984143
27 0322 349: RNCC: 2 | RNVC: 2
27 0322 349: RNCC: 3 | RNVC: 2
9837775: RNCC: 3 | RNVC: 2
27 0322 349: RNCC: 5 | RNVC: 9
9837775: RNCC: 5 | RNVC: 9
270322349: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-198-5025
Double Angle Bracket

121985025
160-744968: RNCC: 3 | RNVC: 2
160-744968: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-316-8302
Angle Bracket

123168302
2300279-5090.00: RNCC: 2 | RNVC: 2
2300279-5090.00: RNCC: 3 | RNVC: 2
2300279-5090.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-348-1591
Angle Bracket

123481591
7731416: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-12-327-3754
Runner

123273754
81671650054: RNCC: 2 | RNVC: 2
81671650054: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-322-8082
Access Cover

123228082
8470 002 107: RNCC: 3 | RNVC: 2
8470002107: RNCC: 5 | RNVC: 2
8470002107: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-382-4610
Rod End Clevis

123824610
700739: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-12-041-2983

5340-12-393-5816
Block Clamp

123935816
160-72091: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-153-8363
Nut And Bolt Locking Plate

121538363
100355-450000.05: RNCC: 2 | RNVC: 2
100355-450000.05: RNCC: 3 | RNVC: 2
100355-450000-05: RNCC: 5 | RNVC: 2
100355-450000-05: RNCC: 5 | RNVC: 9
100355-450000-05: RNCC: 5 | RNVC: 9
100355-450000.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-5359
Angle Bracket

121965359
556-862100-000: RNCC: 3 | RNVC: 2

18 Jul 1983

5340-12-168-3136
Resilient Mount

121683136
CS4-90: RNCC: 3 | RNVC: 9
2485682KZ5012-58: RNCC: 5 | RNVC: 2
SKK2479-2: RNCC: 5 | RNVC: 2
02485681: RNCC: 5 | RNVC: 2
02485682: RNCC: 5 | RNVC: 2
2485681UD5012-58: RNCC: 5 | RNVC: 2

7 Mar 1977

5340-12-363-5176
Multiple Angle Bracket

123635176
SK796-194320.003.0: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-329-6663
Loop Clamp

123296663
DIN3015-L-KP-1-R-8-AL: RNCC: 2 | RNVC: 2
RAAR-108: RNCC: 3 | RNVC: 2
108A-AL: RNCC: 3 | RNVC: 2
RAAR-108: RNCC: 5 | RNVC: 2

16 Sep 1992

5340-12-193-5236
Nonmetallic Bumper

121935236
542-115.00-90: RNCC: 3 | RNVC: 9
5421150090: RNCC: 5 | RNVC: 9

29 Jul 1982

5340-12-373-0378
Angle Bracket

123730378
P-855273-003: RNCC: 3 | RNVC: 2

19 Sep 2007

5340-12-340-4772
Resilient Mount

123404772
DIN95363-A30X15-M8X23-NR60ST: RNCC: 2 | RNVC: 2
500030-M8X23.NR60.ST: RNCC: 5 | RNVC: 2
5218151/11MN60: RNCC: 5 | RNVC: 2
12032323EE0112-47: RNCC: 5 | RNVC: 2
3.000.0.085.006.4: RNCC: 5 | RNVC: 2
1203 2323: RNCC: 5 | RNVC: 2

19 Apr 1996

5340-12-365-2516
Rod End Clevis

123652516
2500075-192380.002.0: RNCC: 3 | RNVC: 2
2500075-192380-002-0: RNCC: 5 | RNVC: 9

11 Dec 2004

5340-12-373-6579
Mending Plate

123736579
8381594740: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-12-303-6128
Dust And Moisture Seal Protective Plug

123036128
81960020101: RNCC: 3 | RNVC: 2
81.96002.0101: RNCC: 5 | RNVC: 2

12 Apr 1985

5340-12-377-3723
Angle Bracket

123773723
10053160: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-091-7285

5340-12-187-9970
Loop Clamp

121879970
4039950044: RNCC: 3 | RNVC: 2

25 May 1981

5340-12-321-2523
Helical Compression Spring Seat

123212523
2420222019: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-166-1985
Furniture Leg Tip

121661985
KBJ90402: RNCC: 3 | RNVC: 2
KZ0435291: RNCC: 5 | RNVC: 2

12 Aug 1976

5340-12-021-7897

5340-12-344-6681
Angle Bracket

123446681
78028 34301: RNCC: 2 | RNVC: 2
7802834301: RNCC: 3 | RNVC: 2
78028 34301: RNCC: 5 | RNVC: 9

26 Nov 1997

5340-12-043-5485

5340-12-307-4868
Mounting Bracket

123074868
5577073: RNCC: 3 | RNVC: 2

23 Jun 1986

5340-12-300-8127
Loop Clamp

123008127
PAN4231BBCDC6620: RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-387-5686
Access Cover

123875686
BD9102G222: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-346-6511
Dust And Moisture Seal Protective Cap

123466511
8363468: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-12-361-4387
Barrel Bolt

123614387
5981-181715.000.0: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-193-0327
Electrical-Mechanical Equipment Post

121930327
VG95148B4XM2,5X13-2.0380-E3A: RNCC: 2 | RNVC: 2
VG95148B4XM2,5X13-2.0380-E3A: RNCC: 3 | RNVC: 2
774-010-23: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-12-378-3416
Mounting Plate

123783416
9997001-828000.006.0: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-356-5188
Rod End Clevis

123565188
L45-115-2: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-195-4731
Webbing Strap

121954731
2300088-104147.00: RNCC: 2 | RNVC: 2
27 0322 333: RNCC: 2 | RNVC: 2
9848834: RNCC: 3 | RNVC: 2
2300088-104147.00: RNCC: 3 | RNVC: 2
2300088-104147.00: RNCC: 5 | RNVC: 9
27 0322 333: RNCC: 5 | RNVC: 9
9848834: RNCC: 5 | RNVC: 9
2300088-104147.00: RNCC: 5 | RNVC: 9
000-C1-25X2,0X500-PE-RAL6031: RNCC: 6 | RNVC: 9

2 Mar 1983

5340-12-384-6829
Manual Control Lever

123846829
F1.1189-40-10-10.16-00: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-12-314-9159
Electrical-Mechanical Equipment Post

123149159
VG95148B5XM2,5X22-NRST: RNCC: 2 | RNVC: 2
VG95148B5XM2,5X22-NRST: RNCC: 3 | RNVC: 2
52.9352.100.55: RNCC: 3 | RNVC: 2
C121-A44-C319: RNCC: 5 | RNVC: 2

26 Aug 1988

5340-12-312-4447
Electrical-Mechanical Equipment Post

123124447
04.54071-18.00.002: RNCC: 3 | RNVC: 2
5800590-4107.002: RNCC: 5 | RNVC: 2

7 Jan 1988

5340-12-356-7526
Retaining Strap

123567526
2300013-1211.00: RNCC: 2 | RNVC: 2
2300013-1211.00: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-198-1140
Mending Plate

121981140
5801813-20000: RNCC: 2 | RNVC: 2
7800180359: RNCC: 3 | RNVC: 2
5801813-20000: RNCC: 5 | RNVC: 2
78001 80359: RNCC: 5 | RNVC: 9

21 Dec 1983

5340-12-325-3807
Access Door

123253807
BHEG 411 146 116: RNCC: 3 | RNVC: 2
BHEG411-146-116: RNCC: 5 | RNVC: 2

29 May 1991

5340-12-350-4181
Butt Hinge Leaf

123504181
J52424120-401: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-334-7932
Protection Bellows

123347932
81964010145: RNCC: 3 | RNVC: 2
908 028: RNCC: 3 | RNVC: 2
81.96401-0145: RNCC: 5 | RNVC: 2

21 Jun 1994

5340-12-341-2942
Mounting Bracket

123412942
5803708-112420.00: RNCC: 2 | RNVC: 2
7804191320: RNCC: 3 | RNVC: 2
5803708-112420.00: RNCC: 5 | RNVC: 2
78041 91320: RNCC: 5 | RNVC: 9

21 Aug 1996

5340-12-143-6024
Spring Tension Clip

121436024
2556-0600.05: RNCC: 2 | RNVC: 2
2556-0600-05: RNCC: 5 | RNVC: 2
2556-0600.05: RNCC: 5 | RNVC: 2
2556-0600-05: RNCC: 5 | RNVC: 2
2556-0600-05: RNCC: 5 | RNVC: 2
2556-0600-05: RNCC: 5 | RNVC: 9
2556-0600-05: RNCC: 5 | RNVC: 9
2556-0600-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-0305
Dust And Moisture Seal Protective Cap

121840305
4607-2400.01: RNCC: 3 | RNVC: 2
1000119-1300-01: RNCC: 5 | RNVC: 2
4607-2400-01: RNCC: 5 | RNVC: 2
1000119-1300-01: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-12-170-3773
Electrical-Mechanical Equipment Post

121703773
81904900176: RNCC: 3 | RNVC: 2
8062 030 109: RNCC: 5 | RNVC: 2
81.90490-0176: RNCC: 5 | RNVC: 2
8062030109: RNCC: 5 | RNVC: 2
8062030109: RNCC: 5 | RNVC: 9

8 Jul 1977

5340-12-304-7695
Electrical-Mechanical Equipment Post

123047695
VG95148C5XM2,5X9,5-ST: RNCC: 2 | RNVC: 2
52.9352.101.05: RNCC: 3 | RNVC: 2
VG95148C5XM2,5X9,5-ST: RNCC: 3 | RNVC: 2

20 Aug 1985

5340-12-198-8883
Retaining Strap

121988883
8371590586: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-180-2729
Resilient Mount

121802729
3575472: RNCC: 3 | RNVC: 2
3575472: RNCC: 5 | RNVC: 2

31 Aug 1979

5340-12-358-8191
Section Block Clamp

123588191
DKAE004: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-198-5357
Rim Lock

121985357
T80: RNCC: 3 | RNVC: 2

7 Feb 1984

5340-12-330-7763
Electrical-Mechanical Equipment Post

123307763
2924450341: RNCC: 3 | RNVC: 2

8 Feb 1993

5340-12-172-2168
Flush Lock

121722168
3202ZRECHTS: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-12-357-8890
Mechanical Stop

123578890
11794101: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-359-0473
Angle Bracket

123590473
3605840051: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-321-3940
Festhalte- Klipp

5340-12-147-6965
Doppelt Abg Halter

5340-12-348-4600
Metal Grille

123484600
100055583: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-311-3569
Lock-Release Lever

123113569
AGS50734: RNCC: 3 | RNVC: 2

21 Aug 1987

5340-12-379-9384
Elastic Strap

123799384
1550573: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-388-0647
Loop Clamp

123880647
6209950065: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-12-359-4382
Schlingen- Klemme

5340-12-180-3601
Dust And Moisture Seal Protective Cap

5340-12-028-5714

5340-12-122-2300

5340-12-374-2497
Mounting Plate

123742497
L523M1002211: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-312-9179
Snap Hook

123129179
05796085: RNCC: 3 | RNVC: 9

18 Feb 1988

5340-12-392-6697
Frame Se Connector

123926697
L121P5001245: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-12-365-1241
Dust And Moisture Seal Protective Plug

123651241
1239870544: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-369-9628
Spring Tension Clip

123699628
1028982: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-12-312-3521
Protection Bellows

123123521
0004630396: RNCC: 3 | RNVC: 9

18 Dec 1987

5340-12-345-4460
Mounting Bracket

123454460
54.0053.171.00: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-347-2115
Support Hook

123472115
54.1100.188.00: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-310-9095
Resilient Mount

123109095
RU51878: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-12-186-8032
Mending Plate

121868032
4545679: RNCC: 3 | RNVC: 2
5801604-020000-003: RNCC: 5 | RNVC: 9
5801604-020000.003: RNCC: 5 | RNVC: 9

6 Feb 1981

5340-12-188-3374
Extension Drawer Slide

121883374
409042856: RNCC: 3 | RNVC: 2
409-042856: RNCC: 5 | RNVC: 2
38 702-034: RNCC: 5 | RNVC: 2
38702-034: RNCC: 5 | RNVC: 2

1 Jul 1981

5340-12-159-3088
Bow Handle

121593088
100330-2500.31: RNCC: 2 | RNVC: 2
02700023100: RNCC: 3 | RNVC: 2
100330-2500.31: RNCC: 5 | RNVC: 2
2000410: RNCC: 5 | RNVC: 2
100330-2500-31: RNCC: 5 | RNVC: 9
100330-2500.31: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-6045
Pipe Bracket

123936045
11.40886-0027: RNCC: 3 | RNVC: 2
11.40886-0027: RNCC: 5 | RNVC: 2
408.02.011: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-12-354-4409
Mounting Plate

123544409
VG95211-ML-123544409: RNCC: 2 | RNVC: 2
E20851: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-177-3411
Strap Fastener Loop

121773411
6030028: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-166-0313
Expansion Shield

121660313
S16: RNCC: 3 | RNVC: 2
50116: RNCC: 5 | RNVC: 2
2501161: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-342-8122
Lock-Release Lever

123428122
2900920005: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-12-346-1186
Mounting Bracket

123461186
250041: RNCC: 3 | RNVC: 2

15 Jun 1998

5340-12-343-8950
Loop Clamp

123438950
249167796: RNCC: 3 | RNVC: 2
ZIPUG 315: RNCC: 5 | RNVC: 2

12 Aug 1997

5340-12-367-4400
Loop Clamp

123674400
883 11: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-333-1403
Retaining Strap

123331403
88413050006: RNCC: 3 | RNVC: 2
88.41305.0006: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-12-357-5425
Angle Bracket

123575425
5582230: RNCC: 2 | RNVC: 2
5582230: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-393-2158
Mounting Bracket

123932158
L219M3024205: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-12-359-0562
Mounting Bracket

123590562
3022218: RNCC: 3 | RNVC: 2
CLIPFIX35: RNCC: 5 | RNVC: 2
5L.4194.009.39: RNCC: 5 | RNVC: 2

12 Dec 2002

5340-12-348-2755
Access Cover

123482755
8909990061: RNCC: 3 | RNVC: 2

20 May 1999

5340-12-309-7940
Access Cover

123097940
6127359: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-163-9749
Pipe Bracket

121639749
2461000160: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-392-0784
Spring Holder

123920784
5281.230.057.800: RNCC: 3 | RNVC: 2

2 May 2013

5340-12-162-5031
Access Door

121625031
1918-111125.007: RNCC: 2 | RNVC: 2
1918-111125-007: RNCC: 5 | RNVC: 2
1918-111125-007: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-7174
Loop Clamp

123797174
DIN3015-ZA2R-15-15-PA: RNCC: 2 | RNVC: 2
RBN215X: RNCC: 3 | RNVC: 2
100256661: RNCC: 5 | RNVC: 2

26 Aug 2009

5340-12-701-7986
Mounting Bracket

127017986
VG95211-ML-127017986: RNCC: 2 | RNVC: 2
5.12.8102.2740.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-369-7857
Mechanical Stop

123697857
SK872-182280.000.0: RNCC: 3 | RNVC: 2
7083554: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-12-184-8353
Angle Bracket

121848353
5801505-3152-002: RNCC: 3 | RNVC: 2
5801505-3152.002: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-317-3694
Ball Socket Seat

123173694
00446-007-000: RNCC: 3 | RNVC: 2
446-07: RNCC: 5 | RNVC: 9

3 Apr 1989

5340-12-381-3661
Rod End Clevis

123813661
DIN71751-A10X40-A4: RNCC: 2 | RNVC: 2

5 Feb 2010

5340-12-188-4655
Spring Tension Clip

121884655
023-100100-08-0: RNCC: 3 | RNVC: 2

13 Jul 1981

5340-12-304-2174
Mending Plate

123042174
1300392-105000.003: RNCC: 2 | RNVC: 2
279.995622: RNCC: 3 | RNVC: 2
279.995622: RNCC: 5 | RNVC: 9
279.995622: RNCC: 5 | RNVC: 9

26 Jun 1985

5340-12-363-9084
Angle Bracket

123639084
J28130126-403: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-349-6075
Retaining Strap

123496075
2500238-150930.000.0: RNCC: 2 | RNVC: 2
2500238-150930.000.0: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-346-7512
Barrel Bolt

123467512
2043.0102: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-378-4287
Clamping Catch

123784287
5812: RNCC: 3 | RNVC: 2
006059: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-12-027-5678

5340-12-317-6982
Retaining Strap

123176982
3228300014: RNCC: 3 | RNVC: 2

2 May 1989

5340-12-366-2905
Dust And Moisture Seal Protective Plug

123662905
GPN600B775: RNCC: 3 | RNVC: 2
600B775: RNCC: 5 | RNVC: 2

6 Apr 2005

5340-12-702-2151
Mounting Bracket

127022151
VG95211-ML-127022151: RNCC: 2 | RNVC: 2
30.7222.1080: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-6342
Lock-Release Lever

123326342
1820413-1120: RNCC: 3 | RNVC: 2

31 Aug 1993

5340-12-328-4094
Mending Plate

123284094
4200081-061800.006: RNCC: 2 | RNVC: 2
4200081-061800.006: RNCC: 3 | RNVC: 2
4200081-061800.006: RNCC: 5 | RNVC: 9
9875107: RNCC: 5 | RNVC: 9

15 May 1992

5340-12-334-0982
Access Cover

123340982
01274710: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-12-384-8721
Cushioning Pad

123848721
211003: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-379-3907
Bow Handle

123793907
502811: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-382-1426
Loop Clamp

123821426
8834: RNCC: 3 | RNVC: 2

14 May 2010

5340-12-194-5351
Dust And Moisture Seal Protective Plug

121945351
300V241: RNCC: 3 | RNVC: 2
301024100: RNCC: 5 | RNVC: 9
GPN300,V241: RNCC: 5 | RNVC: 9
V241: RNCC: 5 | RNVC: 9
V241GPN300: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-190-8765
Helical Compression Spring Seat

121908765
2410320069: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-309-3938
Chain Bolt

123093938
11311460668: RNCC: 3 | RNVC: 9

21 Jan 1987

5340-12-163-5661
Loop Clamp

121635661
LN9490BM24: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-375-6686
Angle Bracket

123756686
6421840040: RNCC: 3 | RNVC: 2
6421840240: RNCC: 5 | RNVC: 2

23 Jun 2008

5340-12-365-0211
Angle Bracket

123650211
5160-520300A02B: RNCC: 2 | RNVC: 2
5160-520300A02B: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-377-1732
Mounting Bracket

123771732
0000944555: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-378-7928
Retaining Bail

123787928
9830010600: RNCC: 3 | RNVC: 2

13 May 2009

5340-12-372-5012
Strap Hinge

123725012
10017177: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-301-8864
Mounting Bracket

123018864
20-4220-066: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-702-6454
Loop Clamp

127026454
VG95211-ML-127026454: RNCC: 2 | RNVC: 2
987S50-80-15-BP: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-0827
Dust And Moisture Seal Protective Cap

123110827
1000/1081: RNCC: 3 | RNVC: 2
M30NR630SCHWARZ: RNCC: 3 | RNVC: 2
100108100: RNCC: 5 | RNVC: 2
GPN1000/1081: RNCC: 5 | RNVC: 2
M4ZS460D7315: RNCC: 5 | RNVC: 2
GPN1000-1081: RNCC: 5 | RNVC: 2

23 Jul 1987

5340-12-164-5225
Ball Socket Seat

121645225
23290-184000.008: RNCC: 2 | RNVC: 2
23290-184000.008: RNCC: 3 | RNVC: 2
23290-184000-008: RNCC: 5 | RNVC: 9
23290-184000.008: RNCC: 5 | RNVC: 9
23290-184000.008: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-2734
Extension Drawer Slide

123342734
6700018-632000.01: RNCC: 2 | RNVC: 2
6700018-632000.01: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-12-700-8700
Loop Clamp

127008700
VG95211-ML-127008700: RNCC: 2 | RNVC: 2
155N464-78: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-377-5484
Access Cover

123775484
4100036-031230.000: RNCC: 2 | RNVC: 2
4100036-031230.000: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-12-121-0352
Nonmetallic Bumper

121210352
VG95092B33X25,5X40X6X17NR70: RNCC: 2 | RNVC: 2
82200-B33X25,5X40X6X17.NR70: RNCC: 3 | RNVC: 2
18184FZKN7090: RNCC: 3 | RNVC: 2
B33X25,5X40X6X17.70NR: RNCC: 5 | RNVC: 2
00013616554: RNCC: 5 | RNVC: 2
81.96020-0005: RNCC: 5 | RNVC: 2
81960200005: RNCC: 5 | RNVC: 2
18184TEFSCHWARZ: RNCC: 5 | RNVC: 2
00.01361-6554: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-9807
Mending Plate

123759807
233284: RNCC: 3 | RNVC: 2
93112-000.04: RNCC: 5 | RNVC: 2

29 Jul 2008

5340-12-324-4443
Cane Bolt

123244443
718040903: RNCC: 3 | RNVC: 2

18 Feb 1991

5340-12-375-6690
Mounting Bracket

123756690
L258M2113101: RNCC: 3 | RNVC: 2

23 Jun 2008

5340-12-353-2098
Spacing Threaded Standoff

123532098
54.0084.611.03: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-374-2971
Section Block Clamp

123742971
5324444: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-374-2821
Loop Clamp

123742821
5307726: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-12-375-2612
Bail Handle

123752612
423-7644: RNCC: 3 | RNVC: 2

8 May 2008

5340-12-178-6843
Double Angle Bracket

121786843
3120720140: RNCC: 3 | RNVC: 2
3120720140: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-375-1520
Manual Control Lever

123751520
04.06.11: RNCC: 3 | RNVC: 2
570659177: RNCC: 5 | RNVC: 2

25 Apr 2008

5340-12-301-6797
Friction Catch Stud

123016797
7820211780: RNCC: 3 | RNVC: 2

1 Nov 1984

5340-12-130-9064

5340-12-387-8519
Mounting Bracket

123878519
7092763: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-372-2568
Retaining Strap

123722568
796.290: RNCC: 3 | RNVC: 2

2 Jul 2007

5340-12-342-1579
Mounting Bracket

123421579
5611500573: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-360-9079
Door Button

123609079
62710263: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-12-356-0492
Mounting Plate

123560492
2339-150130A00C: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-194-5504
Rod End Clevis

121945504
20-7230-038: RNCC: 3 | RNVC: 2

15 Nov 1982

5340-12-349-3899
Access Cover

123493899
VG95211-ML-123493899: RNCC: 2 | RNVC: 2
T524M1226051: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-369-3298
Helical Compression Spring Seat

123693298
NO PRIMARY REF 12-369-3298: RNCC: 3 | RNVC: 2
7084151: RNCC: 5 | RNVC: 2

22 Jun 2006

5340-12-350-5502
Retaining Strap

123505502
700346085200: RNCC: 3 | RNVC: 2
BD9-85MMN346: RNCC: 5 | RNVC: 2

12 Apr 2000

5340-12-324-6840
Mending Plate

123246840
52820-W8.03: RNCC: 3 | RNVC: 2
55338-01: RNCC: 5 | RNVC: 2

15 Mar 1991

5340-12-308-2360
Webbing Strap

123082360
2300218-106200.00: RNCC: 2 | RNVC: 2
2300218-106200.00: RNCC: 3 | RNVC: 2

18 Sep 1986

5340-12-155-2394
Butt Hinge Leaf

121552394
160-26762-12: RNCC: 3 | RNVC: 2
160-26762-12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-5712
Lock-Release Lever

123705712
V6520-03011-106: RNCC: 2 | RNVC: 2
V6520-03011-106: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-12-362-6213
Nonmetallic Bumper

123626213
12.7382-01-11-00.00-22: RNCC: 2 | RNVC: 2
12.7382-01-11-00.00-22: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-366-5386
Dust And Moisture Seal Protective Cap

123665386
TR-01110: RNCC: 3 | RNVC: 2

4 May 2005

5340-12-373-6960
Catch Strike

123736960
X00009755: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-12-300-8536
Dust And Moisture Seal Protective Plug

123008536
550/008: RNCC: 3 | RNVC: 2
GPN550/008: RNCC: 5 | RNVC: 2
550008: RNCC: 5 | RNVC: 9
11.02228: RNCC: 5 | RNVC: 9
550000800: RNCC: 5 | RNVC: 9
GPN550-008: RNCC: 5 | RNVC: 9

5 Sep 1984

5340-12-380-7680
Swivel Caster

123807680
7477PJO060P30-10: RNCC: 3 | RNVC: 2
4031582311860: RNCC: 5 | RNVC: 2

26 Nov 2009

5340-12-314-8659
Mending Plate

123148659
1900037-00-18: RNCC: 2 | RNVC: 2
352855: RNCC: 3 | RNVC: 2

20 Aug 1988

5340-12-351-8962
Door Button

123518962
5801698-1300.02: RNCC: 2 | RNVC: 2
5801698-1300.02: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-198-1442
Webbing Strap

121981442
5801999-392000.00: RNCC: 3 | RNVC: 2
000-B3-20X2,0X200-PE-RAL6031: RNCC: 6 | RNVC: 9

22 Dec 1983

5340-12-176-3306
Access Cover

121763306
30-79510-0021: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-186-4073
Loop Clamp

121864073
81974200075: RNCC: 3 | RNVC: 2

23 Dec 1980

5340-12-315-8266
Access Cover

123158266
54.0026.110.00: RNCC: 3 | RNVC: 2
54002611000: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-311-8861
Dust And Moisture Seal Protective Cap

123118861
162602: RNCC: 2 | RNVC: 2
162602: RNCC: 3 | RNVC: 2
162602: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-165-4591
Butt Hinge

121654591
PAN2404A: RNCC: 3 | RNVC: 2

18 May 1976

5340-12-378-1894
Rigid Caster

123781894
663.07.920: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-321-4031
Access Cover

123214031
108158: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-376-6901
Nut And Bolt Locking Plate

123766901
063921: RNCC: 3 | RNVC: 2

29 Oct 2008

5340-12-366-0130
Mounting Bracket

123660130
9436101236: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-343-2105
Manual Control Handle

123432105
98444271: RNCC: 3 | RNVC: 2

20 May 1997

5340-12-194-2448
Loop Clamp

121942448
803253143B: RNCC: 3 | RNVC: 2

14 Oct 1982

5340-12-309-7769
Access Cover

123097769
5058884: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-318-7986
Double Angle Bracket

123187986
4354925141: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-352-5859
Mechanic Equipment Hardware Kit

123525859
5803786-201850.00: RNCC: 2 | RNVC: 2
65.7162.249.00: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-199-5507
Bridge Clamp

121995507
1241-8002.007: RNCC: 2 | RNVC: 2
1241-8002.007: RNCC: 3 | RNVC: 2
1241-8002-007: RNCC: 5 | RNVC: 2

10 May 1984

5340-12-381-6803
Dust And Moisture Seal Protective Plug

123816803
504027648: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-309-1012
Access Cover

123091012
4642 301 186: RNCC: 3 | RNVC: 2
4642301186: RNCC: 5 | RNVC: 2
4642 301 144: RNCC: 5 | RNVC: 9
4642301144: RNCC: 5 | RNVC: 9

15 Dec 1986

5340-12-337-9666
Mounting Bracket

123379666
601 159 41 40: RNCC: 3 | RNVC: 2
6011594140: RNCC: 5 | RNVC: 2

8 May 1995

5340-12-122-2385

5340-12-377-3988
Spring Tension Clip

123773988
2019880481: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-355-6258
Handle Grip

123556258
1000042-115000.01: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-12-357-9165
Cushioning Pad

123579165
2300042-255162.002: RNCC: 2 | RNVC: 2
2300042-255162.002: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-340-5051
Friction Catch Stud

123405051
5L.3741.008.34: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-12-324-4046
Access Cover

123244046
1060401: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-12-357-9051
Helical Compression Spring Seat

123579051
200.04.525: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-390-3234
Bow Handle

123903234
OA-12.180.04: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-309-8884
Loop Clamp

123098884
E32-821090A00C: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-12-188-1330
Angle Bracket

121881330
81085400006: RNCC: 3 | RNVC: 2
81.08540-0006: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-12-701-1181
Loop Clamp

127011181
VG95211-ML-127011181: RNCC: 2 | RNVC: 2
4727A-16-20: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-6681
Electrical-Mechanical Equipment Post

123276681
C230ZZ30002-000: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-12-162-7823
Pipe Bracket

121627823
1918-121195.024: RNCC: 2 | RNVC: 2
1918-121195-024: RNCC: 5 | RNVC: 2
1918-121195-024: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-9065
Handwheel

123519065
DIN950-D4-125X12-GG: RNCC: 2 | RNVC: 2

14 Sep 2000

5340-12-356-8186
Angle Bracket

123568186
ED88-0100-01001-145: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-12-304-6734
Retaining Strap

123046734
R1: RNCC: 3 | RNVC: 2
H3220-B1X6: RNCC: 3 | RNVC: 2
R085: RNCC: 5 | RNVC: 2
0116 3549: RNCC: 5 | RNVC: 2
01163549ES8932-20: RNCC: 5 | RNVC: 2
B1X6H3220: RNCC: 5 | RNVC: 2
H3220-B1X6: RNCC: 5 | RNVC: 2
1X9WN8508RST1304: RNCC: 5 | RNVC: 9
WN8508-1X9-RST1304: RNCC: 5 | RNVC: 9

12 Aug 1985

5340-12-320-9942
Angle Bracket

123209942
0415 1405: RNCC: 3 | RNVC: 2
04151405ED0150-39: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-12-354-1779
Mending Plate

123541779
03887000: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-185-7149
Mounting Plate

121857149
535031017: RNCC: 3 | RNVC: 2

25 Oct 1980

5340-12-365-9870
Angle Bracket Set

123659870
280006000060: RNCC: 3 | RNVC: 2

23 Feb 2005

5340-12-043-4224

5340-12-334-4075
Flush Lock

123344075
1000433.000.B02: RNCC: 3 | RNVC: 2
600E484: RNCC: 5 | RNVC: 2
10 0050 099: RNCC: 5 | RNVC: 2
100050099: RNCC: 5 | RNVC: 2
0007430035: RNCC: 5 | RNVC: 2
10 0050: RNCC: 5 | RNVC: 9

4 May 1994

5340-12-362-5385
Angle Bracket

123625385
ED41-1388-00001-104: RNCC: 2 | RNVC: 2
ED41-1388-00001-104: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-328-9546
Electrical-Mechanical Equipment Post

123289546
5802259-1112.001: RNCC: 2 | RNVC: 2
5802259-1112.001: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-390-0425
Snap Hook

123900425
500-03-43: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-303-1526
Metal Runner

123031526
052-03068J: RNCC: 3 | RNVC: 2
52-3068J: RNCC: 5 | RNVC: 2

28 Feb 1985

5340-12-161-3000
Retaining Clip

121613000
160-80061-04: RNCC: 3 | RNVC: 2
160-80061-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-5897
Dust And Moisture Seal Protective Cap

121915897
90 012: RNCC: 3 | RNVC: 2
06.05.01.00.52: RNCC: 5 | RNVC: 2
90012: RNCC: 5 | RNVC: 2
0605010052: RNCC: 5 | RNVC: 9
6100123-0088: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-314-5931
Access Cover

123145931
512214-0338.000: RNCC: 3 | RNVC: 2
512214-0338: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-392-0043
Access Cover

123920043
I006148TAN686A: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-326-2669
Pipe Hanger

123262669
3964900240: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-12-325-7037
Nonmetallic Bumper

123257037
4B81462: RNCC: 3 | RNVC: 2
0004340550: RNCC: 5 | RNVC: 2

1 Jul 1991

5340-12-330-9197
Mounting Plate

123309197
251444571200: RNCC: 3 | RNVC: 2
251444571200: RNCC: 5 | RNVC: 2

25 Feb 1993

5340-12-378-4269
Mounting Bracket

123784269
500377006: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-321-2539
Double Angle Bracket

123212539
0223 9962: RNCC: 3 | RNVC: 2
02239962KZ0150-44: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-12-394-1139
Dust And Moisture Seal Protective Cap

123941139
CTP40290P007: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-392-7212
Spacing Threaded Standoff

123927212
1302470: RNCC: 3 | RNVC: 2
CV198981: RNCC: 5 | RNVC: 2
20K.790.014: RNCC: 5 | RNVC: 2

2 Jul 2013

5340-12-313-1875
Bow Handle

123131875
102241124: RNCC: 3 | RNVC: 2
102241124: RNCC: 5 | RNVC: 9

10 Mar 1988

5340-12-327-3593
Loop Clamp

123273593
LN9490BK9: RNCC: 2 | RNVC: 2

15 Jan 1992

5340-12-198-6961
Mending Plate

121986961
43711148-301: RNCC: 3 | RNVC: 2

17 Feb 1984

5340-12-177-2746
Detent Plunger

121772746
5800822-051-013: RNCC: 3 | RNVC: 2
5800822-051.013: RNCC: 5 | RNVC: 2

24 Jan 1979

5340-12-354-8352
Mounting Bracket

123548352
5400049-116821.02: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-331-5397
Padlock

123315397
DIN7465-E1-30-BK-GLEICHSCHLIESZ: RNCC: 2 | RNVC: 2
116/30MM GLEICHSCHLIESZEND: RNCC: 3 | RNVC: 2
85/30KA: RNCC: 3 | RNVC: 2
85/30MM KA: RNCC: 5 | RNVC: 2
ML60070: RNCC: 5 | RNVC: 2

17 May 1993

5340-12-184-4311
Dust And Moisture Seal Protective Plug

121844311
300F27: RNCC: 3 | RNVC: 2
F27GPN300: RNCC: 5 | RNVC: 2
GPN300F27: RNCC: 5 | RNVC: 2
41801037: RNCC: 5 | RNVC: 2
300002700: RNCC: 5 | RNVC: 2
F27: RNCC: 5 | RNVC: 2
GPN300,F27: RNCC: 5 | RNVC: 2
F27-1017105: RNCC: 5 | RNVC: 2

24 Jul 1980

5340-12-184-5061
Loop Clamp

121845061
TS8: RNCC: 3 | RNVC: 2
5800583-096190-105: RNCC: 5 | RNVC: 2
5800583-096190.105: RNCC: 5 | RNVC: 2
5N3821-021-06: RNCC: 5 | RNVC: 2
250870000006: RNCC: 5 | RNVC: 2
5N.3821.021.06: RNCC: 5 | RNVC: 2
5N.3821.021.06: RNCC: 5 | RNVC: 2
0803701: RNCC: 5 | RNVC: 2
DZ0803701: RNCC: 5 | RNVC: 2
TS8: RNCC: 5 | RNVC: 9

29 Jul 1980

5340-12-161-0264
Rod End Clevis

121610264
160-24771-03: RNCC: 3 | RNVC: 2
160-24771-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-352-6310
Metal Grille

123526310
8320-0016: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-702-8590
Access Cover

127028590
53-04045105394: RNCC: 2 | RNVC: 2

5 Jan 1996

5340-12-155-4762
Spring Tension Clip

121554762
160-73105-06: RNCC: 3 | RNVC: 2
160-73105-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-367-0431
Mounting Bracket

123670431
PIKWVF15/15: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-185-0582
Nonmetallic Bumper

121850582
1393005-10900.01: RNCC: 2 | RNVC: 2
1393005-10900-01: RNCC: 5 | RNVC: 9

6 Sep 1980

5340-12-357-9042
Screw Thread Insert And Tool Assortment

123579042
6251.780.002.000: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-187-5457
Dust And Moisture Seal Protective Plug

121875457
600B570: RNCC: 3 | RNVC: 2
GPN600B570: RNCC: 5 | RNVC: 2
GPN600,B570: RNCC: 5 | RNVC: 9
600057000: RNCC: 5 | RNVC: 9
B570: RNCC: 5 | RNVC: 9
B570GPN600: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-318-1076
Angle Bracket

123181076
6171510041: RNCC: 3 | RNVC: 2

13 Jun 1989

5340-12-175-2144
Loop Clamp

121752144
51974010019: RNCC: 3 | RNVC: 2
5000045582: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-338-4533
Detent Plunger

123384533
81307050003: RNCC: 3 | RNVC: 2
81.30705.0003: RNCC: 5 | RNVC: 2
0501 307 080: RNCC: 5 | RNVC: 2
0501307080: RNCC: 5 | RNVC: 2

12 Jul 1995

5340-12-333-4906
Spring Tension Clip

123334906
0004280373: RNCC: 3 | RNVC: 2

22 Dec 1993

5340-12-394-6436
Spring Tension Clip

123946436
183073601: RNCC: 2 | RNVC: 2
183073601: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-332-5976
Dust And Moisture Seal Protective Cap

123325976
532117-9010.982: RNCC: 2 | RNVC: 2
532117-9010.982: RNCC: 3 | RNVC: 2
532117-9010.982: RNCC: 5 | RNVC: 9

26 Aug 1993

5340-12-388-9535
Mending Plate

123889535
3085.310.122: RNCC: 3 | RNVC: 2

9 May 2012

5340-12-042-0717

5340-12-380-4273
Angle Bracket

123804273
105-60504.25: RNCC: 3 | RNVC: 2

29 Oct 2009

5340-12-196-5487
Electrical-Mechanical Equipment Post

121965487
1102: RNCC: 3 | RNVC: 2
731150: RNCC: 5 | RNVC: 2
971151: RNCC: 5 | RNVC: 2
SB.03.115: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-351-6137
Webbing Strap

123516137
7802494698: RNCC: 3 | RNVC: 2
78024 94698: RNCC: 5 | RNVC: 9

8 Aug 2000

5340-12-317-1803
Nonmetallic Bumper

123171803
4603170126: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-301-2738
Mending Plate

123012738
2300106-260100.09: RNCC: 2 | RNVC: 2
2300106-260100.09: RNCC: 3 | RNVC: 2
2300106-260100.09: RNCC: 5 | RNVC: 9
2300106-260100.09: RNCC: 5 | RNVC: 9

3 Oct 1984

5340-12-361-5041
Air Inlet-Outlet Frame

123615041
0093.1023: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-12-361-3768
Handle Grip

123613768
T952M0002228: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-12-134-3044

5340-12-361-8037
Quick Release Plunger

123618037
GN615-M6-BN: RNCC: 3 | RNVC: 2
6.339-097.0: RNCC: 3 | RNVC: 2
BNM6HWN205S: RNCC: 5 | RNVC: 2
RBN410.1-BN-M6: RNCC: 5 | RNVC: 2

19 Nov 2003

5340-12-184-2194
Angle Bracket

121842194
5801357-1100.02: RNCC: 2 | RNVC: 2
5801357-1100.02: RNCC: 3 | RNVC: 2
5801357-1100-02: RNCC: 5 | RNVC: 9
5801357-1100-02: RNCC: 5 | RNVC: 9
5801357-1100-02: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-311-8468
Loop Clamp

123118468
LN9490BK14: RNCC: 2 | RNVC: 2
LN9490BR14: RNCC: 5 | RNVC: 2

22 Oct 1987

5340-12-359-2709
Access Cover

123592709
2904.03.00:00: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-12-195-7123
Metal Runner

121957123
5800043-2120.01: RNCC: 2 | RNVC: 2
5800043-2120-01: RNCC: 3 | RNVC: 2
5800043-2120.01: RNCC: 5 | RNVC: 2
5800043-2120-01: RNCC: 5 | RNVC: 9
5800043-2120.01: RNCC: 5 | RNVC: 9

31 Mar 1983

5340-12-182-1854
Plain Solid Disk

121821854
009-520.102-080: RNCC: 2 | RNVC: 2
5208-102.080: RNCC: 2 | RNVC: 2
009-520.102-080: RNCC: 3 | RNVC: 2
009-520-102-080: RNCC: 5 | RNVC: 2
5208-102-080: RNCC: 5 | RNVC: 9
5208-102.080: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-701-8309
Pawl Fastener

127018309
VG95211-ML-127018309: RNCC: 2 | RNVC: 2
50 OST1 13105-78: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-0336
Angle Bracket

123610336
J32320216-401: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-350-8837
Loop Clamp

123508837
36311-213: RNCC: 3 | RNVC: 2

30 May 2000

5340-12-359-7215
Loop Clamp

123597215
ARS-M8-33: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-189-0599
Lock-Release Lever

121890599
1121-70756: RNCC: 3 | RNVC: 2

24 Aug 1981

5340-12-308-7049
Access Door

123087049
0535501: RNCC: 3 | RNVC: 2

10 Nov 1986

5340-12-393-4053
Dust And Moisture Seal Protective Cap

123934053
119210: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-332-7400
Door Handle

123327400
265 121: RNCC: 3 | RNVC: 2
265.121: RNCC: 5 | RNVC: 2
265121: RNCC: 5 | RNVC: 2
265 121: RNCC: 5 | RNVC: 9

14 Sep 1993

5340-12-355-4366
Spacing Threaded Standoff

123554366
DIK-M3X20: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-010-8516

5340-12-363-5032
Mounting Plate

123635032
T947M4005111: RNCC: 2 | RNVC: 2
T947M4005111: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-198-2788
Detent Plunger

121982788
27 0319 151: RNCC: 2 | RNVC: 2
27 0319 151: RNCC: 5 | RNVC: 2
27 0319 151: RNCC: 5 | RNVC: 9
9849692: RNCC: 5 | RNVC: 9
270319151: RNCC: 5 | RNVC: 9

10 Jan 1984

5340-12-388-8664
Helical Compression Spring Retainer

123888664
5080610718: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-302-7901
Mending Plate

123027901
178.E76.80A-91: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-161-6378
Helical Compression Spring Seat

121616378
51041030057: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-151-5054
Clamping Catch

121515054
23111-4119.00: RNCC: 2 | RNVC: 2
23111-4119.00: RNCC: 3 | RNVC: 2
23111-4119-00: RNCC: 5 | RNVC: 2
23111-4119-00: RNCC: 5 | RNVC: 9
23111-4119-00: RNCC: 5 | RNVC: 9
23111-4119.00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-7098
Mounting Bracket

127027098
25-08301007514: RNCC: 2 | RNVC: 2

5 Dec 1995

5340-12-174-2779
Casement Fastener

121742779
CH12432: RNCC: 3 | RNVC: 2
4284-150: RNCC: 5 | RNVC: 9
CH12432: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-130-4749

5340-12-335-6528
Catch Strike

123356528
5 304 553: RNCC: 3 | RNVC: 2

8 Sep 1994

5340-12-327-0816
Mounting Plate

123270816
5801984-985500.001.0: RNCC: 2 | RNVC: 2
5801984-985500.001.0: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-12-334-8355
Nonmetallic Bumper

123348355
52.3109.807.03: RNCC: 2 | RNVC: 2
52.3109.807.03: RNCC: 3 | RNVC: 2

27 Jun 1994

5340-12-326-2476
Double Angle Bracket

123262476
3964290240: RNCC: 3 | RNVC: 2
396 429 02 40: RNCC: 5 | RNVC: 2

21 Aug 1991

5340-12-332-6756
Angle Bracket

123326756
81974870473: RNCC: 2 | RNVC: 2
81974870473: RNCC: 3 | RNVC: 2
81.97487.0473: RNCC: 5 | RNVC: 2

3 Sep 1993

5340-12-326-2946
Multiple Angle Bracket

123262946
3964750203: RNCC: 3 | RNVC: 2
396 475 02 03 KZ: RNCC: 5 | RNVC: 2

27 Aug 1991

5340-12-318-8271
Spring Tension Clip

123188271
000.931.49.21: RNCC: 3 | RNVC: 2
0009314921: RNCC: 5 | RNVC: 2
000-931-49-10: RNCC: 5 | RNVC: 9

18 Aug 1989

5340-12-184-5555
Electrical-Mechanical Equipment Post

121845555
5801338-02122-004: RNCC: 3 | RNVC: 2
5801338-02122.004: RNCC: 5 | RNVC: 2

31 Jul 1980

5340-12-312-9971
Angle Bracket

123129971
401843-00: RNCC: 3 | RNVC: 2
9XD401843-00: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-198-4320
Webbing Strap

121984320
2500138-160300.00: RNCC: 2 | RNVC: 2
2500138-160300.00: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-12-190-2166
Electrical-Mechanical Equipment Post

121902166
VG95148C5,5XM2,5X14-AL: RNCC: 2 | RNVC: 2
VG95148C5,5XM2,5X14-AL: RNCC: 3 | RNVC: 2
4675743: RNCC: 3 | RNVC: 2
467.5743: RNCC: 5 | RNVC: 2
5801443-151000.002: RNCC: 5 | RNVC: 9
5801443-151000-002: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-347-6376
Access Cover

123476376
1H0121321C: RNCC: 3 | RNVC: 2

19 Jan 1999

5340-12-354-8314
Tee Hinge

123548314
361.85.609: RNCC: 3 | RNVC: 2
4018001: RNCC: 5 | RNVC: 9

29 Aug 2001

5340-12-357-2588
Dust And Moisture Seal Boot

123572588
000 545 85 83: RNCC: 3 | RNVC: 2
0005458583: RNCC: 5 | RNVC: 9

27 May 2002

5340-12-309-8306
Spring Tension Clip

123098306
3228800065: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-364-2471
Mounting Bracket

123642471
4375451140: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-352-2590
Pipe Hanger

123522590
T535M1802101: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-351-4487
Access Cover

123514487
T311M1167101: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-12-361-9885
Dust And Moisture Seal Protective Cap-Plug

123619885
63 6090 310 067: RNCC: 3 | RNVC: 2

12 Dec 2003

5340-12-333-5796
Mounting Bracket

123335796
5802017-600506.00: RNCC: 2 | RNVC: 2
5802017-600506.00: RNCC: 3 | RNVC: 2

7 Jan 1994

5340-12-028-5926

5340-12-178-0453
Nonmetallic Bumper

121780453
3853260068: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-12-311-6062
Butt Hinge Leaf

123116062
LN9372BG1230: RNCC: 2 | RNVC: 2

24 Sep 1987

5340-12-322-5879
Kunst Gleitschiene

123225879
0786173: RNCC: 3 | RNVC: 2
0786173: RNCC: 5 | RNVC: 9

4 Sep 1990

5340-12-320-7062
Electrical-Mechanical Equipment Post

123207062
C121-A44-C54: RNCC: 2 | RNVC: 2
C121-A44-C54: RNCC: 3 | RNVC: 2
VG95148B6XM3X40-NRST: RNCC: 5 | RNVC: 2

8 Feb 1990

5340-12-310-0604
Double Angle Bracket

123100604
0C846.91-10-31-09-000: RNCC: 3 | RNVC: 2

2 Apr 1987

5340-12-151-3668
Spring Tension Clip

121513668
100318-22.02: RNCC: 2 | RNVC: 2
100318-22-02: RNCC: 5 | RNVC: 2
100318-22-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-8044
Compression Cup

121908044
H40-11-88NBR/101: RNCC: 3 | RNVC: 2
H40-11-88NBR101: RNCC: 5 | RNVC: 2
270491: RNCC: 5 | RNVC: 2
454-01-270491: RNCC: 5 | RNVC: 2

15 Dec 1981

5340-12-338-3493
Resilient Mount

123383493
DIN95363-B50X20-M10X10-NR55ST: RNCC: 2 | RNVC: 2
7004153: RNCC: 5 | RNVC: 2
510034-M10X10.NR55.ST: RNCC: 5 | RNVC: 2
7004 153: RNCC: 5 | RNVC: 9

26 Jun 1995

5340-12-188-6180
Electrical-Mechanical Equipment Post

121886180
36 177-001: RNCC: 3 | RNVC: 2
36177-001: RNCC: 5 | RNVC: 2

21 Jul 1981

5340-12-392-6515
Extension Drawer Slide

123926515
DZ2601-0030: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-338-0747
Access Door

123380747
230-385.06: RNCC: 3 | RNVC: 2
PK-HH-21A: RNCC: 5 | RNVC: 9

18 May 1995

5340-12-356-9081
Retaining Strap

123569081
160-77870-06: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-12-327-8036
Friction Catch

123278036
38002-11.0299: RNCC: 2 | RNVC: 2
38002-11.0299: RNCC: 3 | RNVC: 2
38002-11.0299: RNCC: 5 | RNVC: 9

6 Mar 1992

5340-12-329-8690
Butt Hinge Leaf

123298690
VG95211-ML-123298690: RNCC: 2 | RNVC: 2
65207-09001Y111: RNCC: 3 | RNVC: 2
65207-09001Y111: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-334-3523
Dust And Moisture Seal Protective Cap

123343523
9800-00-00.03: RNCC: 3 | RNVC: 2

29 Apr 1994

5340-12-338-8856
Corner Brace

123388856
6700017-205700.02: RNCC: 2 | RNVC: 2
6700017-205700.02: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-195-5776
Helical Compression Spring Seat

121955776
23098: RNCC: 3 | RNVC: 2
23098: RNCC: 5 | RNVC: 9

14 Mar 1983

5340-12-386-5807
Support Hook

123865807
2500262-191311.000.0: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-337-6781
Loop Clamp

123376781
DIN3015-LC-K-4G-30-PA-W1: RNCC: 2 | RNVC: 2
RANG1-430: RNCC: 3 | RNVC: 2
SP430PAH-LI: RNCC: 3 | RNVC: 2
SP430-PAH-LI: RNCC: 5 | RNVC: 2

27 Mar 1995

5340-12-348-4127
Dust And Moisture Seal Boot

123484127
N/S1-6LBN/310: RNCC: 3 | RNVC: 2
S/1-6/310/1: RNCC: 5 | RNVC: 2

16 Jun 1999

5340-12-315-0240
Double Angle Bracket

123150240
P-296820-406: RNCC: 3 | RNVC: 2
P296820-406: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-187-7089
Retaining Strap

121877089
VG95933BR-22-W1-BK: RNCC: 2 | RNVC: 2
1/1G22MMN325: RNCC: 3 | RNVC: 2
1-1G22MMN325: RNCC: 5 | RNVC: 9

29 Apr 1981

5340-12-180-6108
Loop Clamp

121806108
DIN3016-1-B1-52X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-52X15-W1-2: RNCC: 3 | RNVC: 2
RS0.52/15: RNCC: 3 | RNVC: 2
4100015052: RNCC: 5 | RNVC: 2
RS52-15: RNCC: 5 | RNVC: 2
RS52/15: RNCC: 5 | RNVC: 2
DIN3016-B1-52X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-B52X15-W1: RNCC: 5 | RNVC: 9
VG95931B52X15W1: RNCC: 5 | RNVC: 9

21 Sep 1979

5340-12-329-5372
Mending Plate

123295372
2500229-190000.026.0: RNCC: 2 | RNVC: 2
2500229-190000.026.0: RNCC: 3 | RNVC: 2

28 Aug 1992

5340-12-316-6399
Butt Hinge Leaf

123166399
1000192-01 4 10000.01: RNCC: 2 | RNVC: 2
1000192-01 4 10000.01: RNCC: 3 | RNVC: 2
1000192-01 4 10000.01: RNCC: 5 | RNVC: 9

30 Jan 1989

5340-12-367-1923
Butt Hinge

123671923
S252M3172210: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-330-4127
Plug Button

123304127
281827529: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-12-376-2650
Flush Lock

123762650
10065003: RNCC: 3 | RNVC: 2

3 Sep 2008

5340-12-179-5218
Nonmetallic Bumper

121795218
2486201: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-197-8000
Resilient Mount

121978000
19601014: RNCC: 3 | RNVC: 2
V1119601014: RNCC: 5 | RNVC: 2
V1119601014: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-198-1902
Lock-Release Lever

121981902
42040115: RNCC: 3 | RNVC: 2

28 Dec 1983

5340-12-364-6607
Multiple Angle Bracket

123646607
54.1107.400.03: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-314-7844
Mounting Bracket

123147844
3906001: RNCC: 3 | RNVC: 2
33906.001: RNCC: 5 | RNVC: 9
3906.001: RNCC: 5 | RNVC: 9

10 Aug 1988

5340-12-139-6443
Helical Compression Spring Seat

121396443
1000500060: RNCC: 3 | RNVC: 2
30353581300000: RNCC: 5 | RNVC: 9
WMS50L14X: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-5128
Fusible Plug

121865128
050703: RNCC: 3 | RNVC: 2
050703E: RNCC: 5 | RNVC: 2
050703: RNCC: 5 | RNVC: 2

12 Jan 1981

5340-12-336-7123
Access Cover

123367123
4132101: RNCC: 3 | RNVC: 2
41321: RNCC: 5 | RNVC: 2
GZ41321B: RNCC: 5 | RNVC: 2

13 Dec 1994

5340-12-366-0361
Mounting Bracket

123660361
9305420540: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-390-8501
Locking Shackle

123908501
346968: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-12-321-5793
Mending Plate

123215793
435.07.0008: RNCC: 2 | RNVC: 2
435.07.0008: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-325-3537
Loop Clamp

123253537
6764920040: RNCC: 3 | RNVC: 2

28 May 1991

5340-12-181-6842
Headless Straight Rod

121816842
D00006502244: RNCC: 3 | RNVC: 2
00006502244: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-369-9376
Hand Crank

123699376
90430159: RNCC: 3 | RNVC: 2
142474: RNCC: 5 | RNVC: 2
0142474: RNCC: 5 | RNVC: 2
90247150: RNCC: 5 | RNVC: 2

29 Aug 2006

5340-12-360-3729
Dust And Moisture Seal Protective Cap

123603729
0009626506: RNCC: 3 | RNVC: 2
0009626506: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-382-8284
Loop Clamp

123828284
DPO4X: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-12-199-2731
Recess Handle

121992731
151.35.252: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-173-4292
Retaining Strap

121734292
4173948: RNCC: 3 | RNVC: 2

14 Apr 1978

5340-12-365-5856
Angle Bracket

123655856
J29120107-002: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-391-4984
Loop Clamp

123914984
DIN3015-LE-2R-16-PP-W5: RNCC: 2 | RNVC: 2

14 Mar 2013

5340-12-147-2021
Retaining Strap

121472021
BSN18X20X2: RNCC: 3 | RNVC: 2
2376-7000-24: RNCC: 5 | RNVC: 2
527-71-01-923: RNCC: 5 | RNVC: 2
15200000018: RNCC: 5 | RNVC: 2
2376-7000-24: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-338-8013
Mounting Plate

123388013
6700017-202441.00: RNCC: 2 | RNVC: 2
6700017-202441.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-175-8557
Retaining Clip

121758557
06718190011: RNCC: 3 | RNVC: 2
06.71819-0011: RNCC: 5 | RNVC: 2
060009: RNCC: 5 | RNVC: 2

23 Oct 1978

5340-12-329-0737
Nonmetallic Bumper

123290737
C42080-A15-F24: RNCC: 2 | RNVC: 2
C42080-A15-F24: RNCC: 3 | RNVC: 2

17 Jul 1992

5340-12-356-5562
Helical Compression Spring Seat

123565562
J94330217-001: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-177-5172
Webbing Strap

121775172
2300002-226200.000: RNCC: 2 | RNVC: 2
2300002-226200.000: RNCC: 3 | RNVC: 2
2300002-226200: RNCC: 5 | RNVC: 2
2300002-226200: RNCC: 5 | RNVC: 9
2300002-226200: RNCC: 5 | RNVC: 9
2300002-226200: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-145-2287
Retaining Strap

121452287
DIN72573-4X15-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-4X15-ST-ZN: RNCC: 3 | RNVC: 2
945557: RNCC: 5 | RNVC: 2
DIN72573-4X15-ST: RNCC: 5 | RNVC: 9
4X15DIN72573ST: RNCC: 5 | RNVC: 9
4X15DIN72573STR0H: RNCC: 5 | RNVC: 9
DIN72573-4X15-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-369-2310
Access Cover

123692310
03469201: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-12-311-6824
Access Cover

123116824
5801669-7320.00: RNCC: 2 | RNVC: 2
5801669-7320.00: RNCC: 3 | RNVC: 2
5801669-7320.00: RNCC: 5 | RNVC: 2
5801669-7320.00: RNCC: 5 | RNVC: 9

6 Oct 1987

5340-12-146-2895
Webbing Strap

121462895
4047901896: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-300-7723
Angle Bracket

123007723
4355222340: RNCC: 3 | RNVC: 2

29 Aug 1984

5340-12-171-0466
Loop Clamp

121710466
311261695: RNCC: 3 | RNVC: 9

1 Sep 1977

5340-12-040-6194

5340-12-319-3814
Double Angle Bracket

123193814
5802006-621000.05: RNCC: 2 | RNVC: 2
5802006-621000.05: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-175-1838
Loop Clamp

121751838
02454894: RNCC: 3 | RNVC: 2
2454894EE5071-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-376-3776
Pipe Hanger

123763776
A11A741122150: RNCC: 3 | RNVC: 2
A11A741122150: RNCC: 5 | RNVC: 2

22 Sep 2008

5340-12-182-1594
Mounting Bracket

121821594
4114320440: RNCC: 3 | RNVC: 2
411 432 04 40: RNCC: 5 | RNVC: 2

16 Jan 1980

5340-12-356-6178
Access Cover

123566178
0337 3128: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-356-3703
Mounting Plate

123563703
2339-010094A01B: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-197-0572
Retaining Clip

121970572
52.2862.000.12: RNCC: 3 | RNVC: 2
52-2862-000-12: RNCC: 5 | RNVC: 2

14 Sep 1983

5340-12-361-7872
Mounting Plate

123617872
1960-000000.001.0: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-357-4534
Dust And Moisture Seal Protective Plug

123574534
2800-230810.001.0: RNCC: 2 | RNVC: 2
2800-230810.001.0: RNCC: 3 | RNVC: 2

24 Jun 2002

5340-12-309-9317
Access Door

123099317
1865-010200.00.0: RNCC: 3 | RNVC: 9
1865-010200.00.0: RNCC: 5 | RNVC: 9

19 Mar 1987

5340-12-350-5698
Plug Button

123505698
C42166-A148-C21: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-12-363-8926
Runner

123638926
J92227008-001: RNCC: 3 | RNVC: 2

3 Aug 2004

5340-12-348-0795
Nonmetallic Bumper

123480795
4613330114: RNCC: 3 | RNVC: 2

9 Apr 1999

5340-12-300-3112
Door Hook

123003112
3097400316: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-197-2593
Expansion Plug

121972593
3603320129: RNCC: 3 | RNVC: 2

5 Oct 1983

5340-12-309-2870
Angle Bracket

123092870
81.41720.5142: RNCC: 3 | RNVC: 2

9 Jan 1987

5340-12-300-9166
Retaining Clip

123009166
3093150031: RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-178-3033
Nonmetallic Bumper

121783033
3853200077: RNCC: 3 | RNVC: 2

12 Apr 1979

5340-12-180-7041
Clamping Catch

121807041
6020120GALZN5C: RNCC: 3 | RNVC: 2

28 Sep 1979

5340-12-021-2347

5340-12-379-4752
Mounting Plate

123794752
1543923: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-12-196-2651
Angle Bracket

121962651
03713800: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-385-0133
Mounting Bracket

123850133
3084 307 185: RNCC: 3 | RNVC: 2

19 Apr 2011

5340-12-362-7279
Dust And Moisture Seal Protective Cap

123627279
05890-08: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-026-1435

5340-12-025-9834

5340-12-198-7892
Bow Handle

121987892
3356985236: RNCC: 3 | RNVC: 2

27 Feb 1984

5340-12-364-5001
Webbing Strap

123645001
4377900796: RNCC: 3 | RNVC: 2

2 Oct 2004

5340-12-349-6187
Rod End Connector

123496187
2356100500: RNCC: 3 | RNVC: 2
2356100500: RNCC: 5 | RNVC: 2

9 Dec 1999

5340-12-324-3311
Nonmetallic Bumper

123243311
4413220144: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-12-194-2547
Shimmy Damper

121942547
803253147: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-12-360-8917
Headless Straight Rod

123608917
P70162101300: RNCC: 2 | RNVC: 2
P70162101300: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-342-5802
Access Cover

123425802
MB 007570: RNCC: 3 | RNVC: 2

3 Mar 1997

5340-12-320-0669
Electrical-Mechanical Equipment Post

123200669
3512 712 43630: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-309-9358
Retaining Strap

123099358
401383-01: RNCC: 3 | RNVC: 2

20 Mar 1987

5340-12-331-2964
Mounting Plate

123312964
U100-1703-001: RNCC: 2 | RNVC: 2
U100-1703-001: RNCC: 3 | RNVC: 2
U100-1703-001: RNCC: 5 | RNVC: 2

19 Apr 1993

5340-12-377-5264
Rigid Caster

123775264
SF-2072.03-39: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-12-182-1551
Mounting Bracket

121821551
5801506-5520.002: RNCC: 2 | RNVC: 2
3518028010: RNCC: 3 | RNVC: 2
5801506-5520-002: RNCC: 5 | RNVC: 2
5801506-5520-002: RNCC: 5 | RNVC: 9
35180 28010: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-182-0964
Resilient Mount

121820964
992956100100: RNCC: 3 | RNVC: 2
99-2956-1001-00: RNCC: 5 | RNVC: 2

14 Jan 1980

5340-12-350-7548
Angle Bracket

123507548
105-94104.08: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-317-0690
Mounting Bracket

123170690
4613500138: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-316-2951
Rod End Clevis

123162951
5186302: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-190-0202
Helical Compression Spring Seat

121900202
2D19266: RNCC: 3 | RNVC: 2

3 Nov 1981

5340-12-023-0915

5340-12-050-2517

5340-12-702-6121
Loop Clamp

127026121
VG95211-ML-127026121: RNCC: 2 | RNVC: 2
5893A-9,5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-2505
Mounting Plate

123542505
105-072-298-1: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-12-390-7526
Manual Control Lever

123907526
1-4527-033-00: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-12-311-5351
Angle Bracket

123115351
F01-240000-60-0: RNCC: 3 | RNVC: 2

15 Sep 1987

5340-12-300-4452
Sealing Plug Assembly

123004452
3.3304-1000.1: RNCC: 3 | RNVC: 2
3330410001: RNCC: 5 | RNVC: 2
0004310935: RNCC: 5 | RNVC: 2
3-3304-1000-1: RNCC: 5 | RNVC: 2

1 Aug 1984

5340-12-363-6870
Loop Clamp

123636870
DIN3016-1-D1-40X15-W1-2-EPDM: RNCC: 2 | RNVC: 2
RSGU1.40/15-W1: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-199-2786
Retaining Strap

121992786
VG95933ER-22-W1-BK: RNCC: 2 | RNVC: 2
1/2D22MMN325: RNCC: 3 | RNVC: 2
1-2D22MMN325: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-12-196-2764
Angle Bracket

121962764
P-231225-403: RNCC: 3 | RNVC: 2
P231225-403: RNCC: 5 | RNVC: 2

22 Jun 1983

5340-12-148-3200
Handwheel

121483200
VG85088-A-100X9-GT: RNCC: 2 | RNVC: 2
VG85088-A-100X9-GT: RNCC: 3 | RNVC: 2
VG85088-A-100X9-GT: RNCC: 3 | RNVC: 2
1205 0965: RNCC: 3 | RNVC: 2
VG85088-A-100X9-GT: RNCC: 3 | RNVC: 9
12050965: RNCC: 5 | RNVC: 2
3.415.0.403.001.4: RNCC: 5 | RNVC: 2
A100X9VG85088-GTW40: RNCC: 5 | RNVC: 9
A100X9VG85088GTW40: RNCC: 5 | RNVC: 9
3-415-0-403-001-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-1388
Retaining Strap

123081388
4016080072: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-134-3472

5340-12-365-9941
Mounting Bracket

123659941
9305530240: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-12-330-2349
Retaining Strap

123302349
5057507: RNCC: 3 | RNVC: 9

18 Nov 1992

5340-12-323-1844
Ball Socket Seat

123231844
400130246: RNCC: 2 | RNVC: 2
400130246: RNCC: 3 | RNVC: 2

30 Oct 1990

5340-12-375-4688
Mounting Bracket

123754688
1520788: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-352-9893
Dust And Moisture Seal Protective Cap

123529893
M01502: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-319-9302
Access Cover

123199302
3617004: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-702-2092
Mounting Bracket

127022092
VG95211-ML-127022092: RNCC: 2 | RNVC: 2
30.7215.10040: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-356-3300
Helical Compression Spring Retainer

123563300
3011R-301200.02: RNCC: 2 | RNVC: 2
3011R-301200.02: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-310-7830
Clamping Catch

123107830
2220320008: RNCC: 3 | RNVC: 2
22203 20008: RNCC: 5 | RNVC: 9

30 Jun 1987

5340-12-352-9882
Mounting Plate

123529882
F02722: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-197-3953
Nonmetallic Bumper

121973953
64414011: RNCC: 3 | RNVC: 2
421-59-55-4: RNCC: 5 | RNVC: 2
421.59-55.4: RNCC: 5 | RNVC: 2
4414/011: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-198-5449
Loop Clamp

121985449
23114-5100.10: RNCC: 2 | RNVC: 2
23114-5100.10: RNCC: 3 | RNVC: 2
23114-5100-10: RNCC: 5 | RNVC: 9
23114-5100.10: RNCC: 5 | RNVC: 9
23114-5100-10: RNCC: 5 | RNVC: 9

8 Feb 1984

5340-12-303-5834
Pipe Bracket

123035834
P-616781-001: RNCC: 3 | RNVC: 2
P616781-001: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-344-4258
Mounting Bracket

123444258
P-296881-471: RNCC: 3 | RNVC: 2
P296881-471: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-359-0934
Loop Clamp

123590934
DIN3016-1-D2-6-6X15-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Dec 2002

5340-12-021-3771

5340-12-365-7362
Angle Bracket

123657362
9438853014: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-12-330-1334
Mounting Bracket

123301334
272.332 390: RNCC: 2 | RNVC: 2
272.332.390: RNCC: 3 | RNVC: 2
272.332 390: RNCC: 5 | RNVC: 9

6 Nov 1992

5340-12-353-7757
Double Angle Bracket

123537757
1AJ0057T01: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-354-6060
Mounting Plate

123546060
5564760041: RNCC: 3 | RNVC: 2

8 Aug 2001

5340-12-300-2038
Angle Bracket

123002038
CF 491 631: RNCC: 3 | RNVC: 2
CF 491 631: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-136-1424

5340-12-360-7094
Mounting Bracket

123607094
000611-244000.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-025-4392

5340-12-194-2111
Angle Bracket

121942111
5544180: RNCC: 3 | RNVC: 2
554.4180: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-319-7111
Mounting Plate

123197111
136M19032: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-12-311-8705
Electrical-Mechanical Equipment Post

123118705
272.1329.30-54: RNCC: 3 | RNVC: 2
272.1329.30-54: RNCC: 5 | RNVC: 9

26 Oct 1987

5340-12-320-2499
Nonmetallic Solid Wheel

123202499
1083201: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-12-393-8530
Mounting Bracket

123938530
L5537005322000: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-301-7924
Expansion Shield

123017924
11988: RNCC: 3 | RNVC: 2
01242276: RNCC: 5 | RNVC: 2
A3,2X1N92075T: RNCC: 5 | RNVC: 2
PL-TUE11988PE181FL: RNCC: 5 | RNVC: 2
0124 2276: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-199-2518
Lock-Release Lever

121992518
5801758-1310.00: RNCC: 2 | RNVC: 2
5801758-1310.00: RNCC: 3 | RNVC: 2
5801758-1310.00: RNCC: 3 | RNVC: 2
5801758-1310.00: RNCC: 3 | RNVC: 2
5801758-1310.00: RNCC: 5 | RNVC: 2
5801758-1310.00: RNCC: 5 | RNVC: 9
5801758-1310.00: RNCC: 5 | RNVC: 9

6 Apr 1984

5340-12-311-6568
Clamping Catch

123116568
8100219-1700: RNCC: 2 | RNVC: 2
4446 1050 00: RNCC: 3 | RNVC: 2
8100219-1700: RNCC: 5 | RNVC: 9

1 Oct 1987

5340-12-313-3677
Mounting Bracket

123133677
4200081-151611.000: RNCC: 3 | RNVC: 9
9844941: RNCC: 5 | RNVC: 9
4200081-151611.000: RNCC: 5 | RNVC: 9

25 Mar 1988

5340-12-349-9093
Double Angle Bracket

123499093
58R090-10903: RNCC: 2 | RNVC: 2
58R090-10903: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-12-311-1012
Mounting Bracket

123111012
NO PRIMARY REF 12-311-1012: RNCC: 3 | RNVC: 2
910.16-L60GG: RNCC: 5 | RNVC: 9
9090738: RNCC: 5 | RNVC: 9

27 Jul 1987

5340-12-362-2717
Mounting Bracket

123622717
J92228012-403: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-124-3268
Expansion Plug

121243268
DIN443-20-ST-PHR: RNCC: 2 | RNVC: 2
0948391792: RNCC: 5 | RNVC: 2
000443020000: RNCC: 5 | RNVC: 2
20DIN443PHR: RNCC: 5 | RNVC: 2
948391792: RNCC: 5 | RNVC: 9
0948391792: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-2230
Electrical-Mechanical Equipment Post

121882230
VG95148C8XM4X20-ST: RNCC: 2 | RNVC: 2
0801-52: RNCC: 3 | RNVC: 2
VG95148C8XM4X20-ST: RNCC: 3 | RNVC: 2

16 Jun 1981

5340-12-311-8748
Butt Hinge

123118748
219-9002: RNCC: 3 | RNVC: 2
1055-U6: RNCC: 3 | RNVC: 2

26 Oct 1987

5340-12-191-2237
Compression Cup

121912237
103-620-69: RNCC: 3 | RNVC: 2

19 Jan 1982

5340-12-381-9912
Runner

123819912
000605-204410.04: RNCC: 2 | RNVC: 2
000605-204410.04: RNCC: 3 | RNVC: 2
39207: RNCC: 5 | RNVC: 2

26 Apr 2010

5340-12-387-8486
Loop Clamp

123878486
7092778: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-381-9078
Double Angle Bracket

123819078
000605-203340.06: RNCC: 2 | RNVC: 2

16 Apr 2010

5340-12-315-3534
Sealing Plug Assembly

123153534
1463203359: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-333-1240
Lock-Release Lever

123331240
81671655013: RNCC: 2 | RNVC: 2
81671655013: RNCC: 3 | RNVC: 2
81.67165.5013: RNCC: 5 | RNVC: 2

2 Nov 1993

5340-12-188-9337
Loop Clamp

121889337
4060940242: RNCC: 3 | RNVC: 2
406 094 02 42: RNCC: 5 | RNVC: 2
4060940242: RNCC: 5 | RNVC: 2

10 Aug 1981

5340-12-702-4228
Angle Bracket

127024228
VG95211-ML-127024228: RNCC: 2 | RNVC: 2
5.12.7206.1693.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-1652
Angle Bracket

123011652
A-243825-025: RNCC: 3 | RNVC: 2
A243825-025: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-702-6116
Loop Clamp

127026116
VG95211-ML-127026116: RNCC: 2 | RNVC: 2
5893A-13,5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-4716
Loop Clamp

123084716
2300223-180090.02.0: RNCC: 2 | RNVC: 2
2300223-180090.02.0: RNCC: 3 | RNVC: 2

14 Oct 1986

5340-12-370-0221
Loop Clamp

123700221
DIN 3016-1-D1-15X12-W1-2-EDPM: RNCC: 2 | RNVC: 2
80030863: RNCC: 5 | RNVC: 2

5 Sep 2006

5340-12-390-2753
Loop Clamp

123902753
LNGF 16,4/6,4 PP: RNCC: 3 | RNVC: 2
SP0451143: RNCC: 5 | RNVC: 2
LNGF 16,4/6,4 PP: RNCC: 5 | RNVC: 2

24 Oct 2012

5340-12-173-7911
Spring Tension Clip

121737911
P-296652-009: RNCC: 3 | RNVC: 2
P296652-009: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-148-9154
Loop Clamp

121489154
DIN3016-1-B1-24X15-W1-2: RNCC: 2 | RNVC: 2
RS0.24/15: RNCC: 3 | RNVC: 2
DIN3016-B1-24X15-W1-2: RNCC: 3 | RNVC: 2
RS24/15: RNCC: 5 | RNVC: 2
RS24-15: RNCC: 5 | RNVC: 2
12151704: RNCC: 5 | RNVC: 2
4100015024: RNCC: 5 | RNVC: 2
VG95931B24X15W1: RNCC: 5 | RNVC: 9
VG95931-B24X15-W1: RNCC: 5 | RNVC: 9
DIN3016-B1-24X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7152
Angle Bracket

127017152
VG95211-ML-127017152: RNCC: 2 | RNVC: 2
5.12.7601.4040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-3367
Spring Tension Clip

123593367
18122345848: RNCC: 3 | RNVC: 2

24 Jan 2003

5340-12-319-4795
Butt Hinge Leaf

123194795
502279: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-175-5446
Detent Plunger

121755446
WW407766: RNCC: 3 | RNVC: 9
WW407766: RNCC: 5 | RNVC: 2
WW 407 766: RNCC: 5 | RNVC: 2
WW 407 766: RNCC: 5 | RNVC: 9

27 Sep 1978

5340-12-314-4011
Butt Hinge Leaf

123144011
272.309 494: RNCC: 2 | RNVC: 2
272.309.494: RNCC: 3 | RNVC: 2
272.309 494: RNCC: 5 | RNVC: 9

2 Jul 1988

5340-12-322-8824
Retaining Strap

123228824
1202 7900: RNCC: 3 | RNVC: 2
12027900EE0111-21: RNCC: 5 | RNVC: 2
1202 7900: RNCC: 5 | RNVC: 9
3.602.0.977.041.4: RNCC: 5 | RNVC: 9
3.602.0.977.041.4: RNCC: 5 | RNVC: 9

2 Oct 1990

5340-12-315-3019
Angle Bracket

123153019
4032230841: RNCC: 3 | RNVC: 2
403 223 08 41: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-129-6632

5340-12-364-1464
Permanent Magnet

123641464
FG32L: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-12-382-2561
Butt Hinge

123822561
2500171-423100.02: RNCC: 2 | RNVC: 2
2500171-423100.02: RNCC: 3 | RNVC: 2

28 May 2010

Load More Results