What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 83 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 83 of 178

5340-12-170-7334
Loop Clamp

121707334
HNY17V: RNCC: 3 | RNVC: 2
42096066: RNCC: 5 | RNVC: 2
211-65179: RNCC: 5 | RNVC: 2
203017101: RNCC: 5 | RNVC: 9

3 Aug 1977

5340-12-350-1890
Angle Bracket

123501890
2125-115400.07B: RNCC: 2 | RNVC: 2
2125-115400.07B: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-12-328-6145
Angle Bracket

123286145
81155010709: RNCC: 3 | RNVC: 2
81.15501-0709: RNCC: 5 | RNVC: 2

6 Jun 1992

5340-12-318-2354
Dust And Moisture Seal Protective Cap-Plug

123182354
SK-178-004: RNCC: 3 | RNVC: 2
SK-178-001: RNCC: 3 | RNVC: 2
SK 178 001: RNCC: 5 | RNVC: 2
SK 178-001: RNCC: 5 | RNVC: 2
SK 178-004: RNCC: 5 | RNVC: 2

22 Jun 1989

5340-12-702-6452
Loop Clamp

127026452
VG95211-ML-127026452: RNCC: 2 | RNVC: 2
987S50-52-15-BP: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-356-6824
Manual Control Handle

123566824
J94330202-001: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-12-130-1100
Strap Fastener Loop

121301100
DIN6406-D25-ST-VERZINKT: RNCC: 2 | RNVC: 2
3220054: RNCC: 3 | RNVC: 2
D25DIN6406STVERZINKT: RNCC: 5 | RNVC: 2
51083: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-349-7498
Angle Bracket

123497498
FAST-202290.02: RNCC: 2 | RNVC: 2
FAST-202290.02: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-356-1752
Angle Bracket

123561752
ED41-0900-00215-142: RNCC: 2 | RNVC: 2
ED41-0900-00215-142: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-333-0934
Mending Plate

123330934
4895403: RNCC: 3 | RNVC: 2
4895402: RNCC: 5 | RNVC: 9

28 Oct 1993

5340-12-394-0782
Dust And Moisture Seal Protective Cap

123940782
CTP40490P013: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-354-1199
Access Cover

123541199
03759310: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-321-4836
Retaining Strap

123214836
272.368.278: RNCC: 3 | RNVC: 2
272.368 278: RNCC: 5 | RNVC: 9

23 May 1990

5340-12-358-9203
Angle Bracket

123589203
3872930041: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-198-6301
Escutcheon Plate

121986301
281847725: RNCC: 3 | RNVC: 9

14 Feb 1984

5340-12-313-3724
Mending Plate

123133724
110300721-22: RNCC: 3 | RNVC: 2

26 Mar 1988

5340-12-197-5586
Rod End Clevis

121975586
1809112000: RNCC: 3 | RNVC: 2
0002521014: RNCC: 5 | RNVC: 2

2 Nov 1983

5340-12-197-8060
Angle Bracket

121978060
2564201: RNCC: 3 | RNVC: 2

23 Nov 1983

5340-12-010-0874

5340-12-302-0118
Nonmetallic Bumper

123020118
54.0028.323.04: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-12-305-5637
Angle Bracket

123055637
384590: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-366-2903
Bow Handle

123662903
S991M5007801: RNCC: 2 | RNVC: 2
S991M5007801: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-356-1429
Dust And Moisture Seal Protective Cap

123561429
1014-2112: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-379-6218
Butt Hinge

123796218
530324: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-12-364-3971
Dust And Moisture Seal Protective Plug

123643971
46512330480: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-342-8760
Resilient Mount

123428760
3531550150: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-12-320-4779
Electrical-Mechanical Equipment Post

123204779
54.0061.210.03: RNCC: 3 | RNVC: 2

18 Jan 1990

5340-12-319-7798
Mounting Bracket

123197798
3818102914: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-12-319-8064
Bow Handle

123198064
CF 832 110 AE: RNCC: 2 | RNVC: 2
CF 832 110 AE: RNCC: 3 | RNVC: 2
CF 832 110 AE: RNCC: 5 | RNVC: 2

7 Nov 1989

5340-12-306-0843
Double Angle Bracket

123060843
54.0061.100.01: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-320-1492
Dust And Moisture Seal Protective Cap

123201492
51579S0006: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-12-357-5825
Retaining Strap

123575825
5VC4 763: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-180-3165
Retaining Strap

121803165
02536956: RNCC: 3 | RNVC: 2
2536956EE5006-75: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-175-0990
Nonmetallic Bumper

121750990
4408110097: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-186-4277
Helical Compression Spring Seat

121864277
8730720076: RNCC: 3 | RNVC: 2

30 Dec 1980

5340-12-353-2918
Handle Grip

123532918
2435.034: RNCC: 3 | RNVC: 2

1 Mar 2001

5340-12-162-8881

5340-12-315-1892
Dust And Moisture Seal Protective Plug

123151892
1532640055: RNCC: 3 | RNVC: 2
153 264 00 55: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-359-1957
Angle Bracket

123591957
9483160152: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-326-3052
Double Angle Bracket

123263052
3964750040: RNCC: 3 | RNVC: 2
396 475 00 40: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-12-350-4447
Dust And Moisture Seal Protective Cap

123504447
12102102: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-314-9130
Buckle

123149130
NO PRIMARY REF 12-314-9130: RNCC: 3 | RNVC: 2
02896B-VERZINKT: RNCC: 5 | RNVC: 9

26 Aug 1988

5340-12-163-9742
Rod End Clevis

121639742
FA2-976-06: RNCC: 3 | RNVC: 2
1918-123141-006: RNCC: 5 | RNVC: 2
1918-123141-006: RNCC: 5 | RNVC: 9
1918-123141.006: RNCC: 5 | RNVC: 9
FA297606: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-6352
Loop Holder

127026352
VG95211-ML-127026352: RNCC: 2 | RNVC: 2
84-7605-241: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-189-0848
Access Cover

121890848
009-078.931-000: RNCC: 3 | RNVC: 2
009-078-931: RNCC: 5 | RNVC: 2
009-078.931: RNCC: 5 | RNVC: 2
009-078-931-000: RNCC: 5 | RNVC: 2
009-078-931: RNCC: 5 | RNVC: 9
009-078.931: RNCC: 5 | RNVC: 9

26 Aug 1981

5340-12-354-4297
Retaining Bail

123544297
E31477- 00: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-12-300-4595
Sealing Plug Assembly

123004595
E4-2016450: RNCC: 3 | RNVC: 2
E4-2016450: RNCC: 5 | RNVC: 9
E4-2016450: RNCC: 5 | RNVC: 9

3 Aug 1984

5340-12-348-9479
Mounting Plate

123489479
680003/7327-29-00-13: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-12-194-9930
Mending Plate

121949930
2500067-105000.01: RNCC: 2 | RNVC: 2
2500067-105000.01: RNCC: 3 | RNVC: 2
2500067-105000-01: RNCC: 5 | RNVC: 9

28 Dec 1982

5340-12-352-6322
Webbing Strap

123526322
8310-0008: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-375-0147
Access Cover

123750147
279.662 605: RNCC: 2 | RNVC: 2
279.662 605: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-12-315-1897
Double Angle Bracket

123151897
6212850840: RNCC: 3 | RNVC: 2
621 285 08 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-310-2674
Cane Bolt

123102674
2300088-310610.01: RNCC: 2 | RNVC: 2
9851203: RNCC: 3 | RNVC: 2
9851203: RNCC: 5 | RNVC: 9

30 Apr 1987

5340-12-348-0162
Manual Control Lever

123480162
9050244: RNCC: 3 | RNVC: 2
9050244: RNCC: 5 | RNVC: 2

26 Mar 1999

5340-12-348-2392
Access Cover

123482392
2606.502.101: RNCC: 3 | RNVC: 2
2806.502.101: RNCC: 5 | RNVC: 9

11 May 1999

5340-12-353-0297
Access Cover

123530297
0115 2713: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-375-1377
Dust And Moisture Seal Boot

123751377
L623M1001201: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-379-5117
Angle Bracket

123795117
0049811: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-12-197-0765
Retaining Strap

121970765
4356847035: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-366-1109
Fuehrungs- Schiene

123661109
279.663 749: RNCC: 2 | RNVC: 2
279.663 749: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-317-6600
Mounting Bracket

123176600
3383500138: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-12-343-5106
Mounting Plate

123435106
4618100511: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-12-393-2935
Double Angle Bracket

123932935
J92228359-401: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-328-9514
Retaining Clip

123289514
2653-183000.11: RNCC: 2 | RNVC: 2
2653-183000.11: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-366-5730
Nonmetallic Bumper

123665730
680003/7323-08-00-39: RNCC: 3 | RNVC: 2
474494: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-393-6075
Pipe Hanger

123936075
11.43343-0087: RNCC: 3 | RNVC: 2
11.43343-0087: RNCC: 5 | RNVC: 2
433.10.055: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-12-154-7974
Retaining Strap

121547974
51-0288-244-01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-9951
Dust And Moisture Seal Protective Cap

127029951
VG95211-ML-127029951: RNCC: 2 | RNVC: 2
2610S51-20: RNCC: 3 | RNVC: 2
0500823197099: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-335-8572
Mounting Plate

123358572
073-291000-911-0: RNCC: 2 | RNVC: 2
073-291000-911-0: RNCC: 3 | RNVC: 2

26 Sep 1994

5340-12-384-2124
Angle Bracket

123842124
82669120018: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-12-321-3252
Dust And Moisture Seal Protective Plug

123213252
191971908B: RNCC: 3 | RNVC: 9

4 May 1990

5340-12-323-6113
Mounting Bracket

123236113
6030700740: RNCC: 3 | RNVC: 2

12 Dec 1990

5340-12-172-2220
Detent Plunger

121722220
4214270174: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-12-371-4752
Multiple Angle Bracket

123714752
6794910541: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-12-361-4812
Dust And Moisture Seal Protective Plug

123614812
1510150: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-373-7052
Mounting Plate

123737052
X00002013: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-12-378-4002
Retaining Strap

123784002
0347 6288: RNCC: 3 | RNVC: 2
05710610: RNCC: 5 | RNVC: 2
CV155306: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-12-197-8061
Angle Bracket

121978061
2794601: RNCC: 3 | RNVC: 2

23 Nov 1983

5340-12-310-7795
Retaining Strap

123107795
1194200600: RNCC: 3 | RNVC: 2

30 Jun 1987

5340-12-043-2707

5340-12-044-0039

5340-12-327-0430
Mounting Bracket

123270430
6175220048: RNCC: 3 | RNVC: 2

25 Nov 1991

5340-12-362-7354
Angle Bracket

123627354
S537M3024101: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-338-7642
Access Door

123387642
6700017-202930.00: RNCC: 2 | RNVC: 2
6700017-202930.00: RNCC: 3 | RNVC: 2

23 Aug 1995

5340-12-382-8733
Access Cover

123828733
21-020-01-0104092: RNCC: 3 | RNVC: 2

18 Aug 2010

5340-12-161-0874
Rod End Clevis

121610874
160-23041-06: RNCC: 3 | RNVC: 2
160-23041-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-6220
Electrical-Mechanical Equipment Post

121966220
4183301: RNCC: 3 | RNVC: 2

25 Jul 1983

5340-12-313-8661
Angle Bracket

123138661
4254760336: RNCC: 3 | RNVC: 2
425 476 03 36: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-383-3461
Mounting Bracket

123833461
1147184: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-12-349-2069
Dust And Moisture Seal Boot

123492069
110199: RNCC: 3 | RNVC: 2
110199: RNCC: 5 | RNVC: 2
00110199: RNCC: 5 | RNVC: 2

7 Oct 1999

5340-12-040-4197

5340-12-314-6721
Mounting Bracket

123146721
512214-3501.000: RNCC: 3 | RNVC: 2
512214-3501: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-187-6765
Nut And Bolt Locking Plate

121876765
5560536/4: RNCC: 3 | RNVC: 2
5070302025: RNCC: 5 | RNVC: 2
5560536-4: RNCC: 5 | RNVC: 2
5560536/4C: RNCC: 5 | RNVC: 2

27 Apr 1981

5340-12-196-9811
Mending Plate

121969811
4900059-211403.000.0: RNCC: 3 | RNVC: 2
4900059-211403-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-340-0944
Access Cover

123400944
1206 1420: RNCC: 3 | RNVC: 2
12061420EE0112-90: RNCC: 5 | RNVC: 2
30.68-053/4.4: RNCC: 5 | RNVC: 2

27 Feb 1996

5340-12-384-6493
Loop Clamp

123846493
1000007600725: RNCC: 3 | RNVC: 2
S001299: RNCC: 5 | RNVC: 2
5340PL0962779: RNCC: 6 | RNVC: 9

16 Mar 2011

5340-12-330-8635
Snap Hook

123308635
53068: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-12-388-0314
Access Cover

123880314
5840980743: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-12-350-4556
Section Block Clamp

123504556
JN0413CEJ56: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-176-4065
Angle Bracket

121764065
PAN5315C: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-358-9223
Mounting Bracket

123589223
3854260846: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-352-0388
Mending Plate

123520388
2300387-700620.007: RNCC: 2 | RNVC: 2
9907336: RNCC: 3 | RNVC: 2
2300387-700620.007: RNCC: 5 | RNVC: 9
9907336: RNCC: 5 | RNVC: 9

9 Oct 2000

5340-12-154-6085
Loop Clamp

121546085
28209950701E0: RNCC: 3 | RNVC: 2
8209950701: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-165-7284
Plain Solid Disk

121657284
306T23007: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-148-2338
Handwheel

121482338
12709-24000: RNCC: 2 | RNVC: 2
333008-9024.000: RNCC: 3 | RNVC: 2
12709-24000: RNCC: 5 | RNVC: 2
12709-24000: RNCC: 5 | RNVC: 9
333008-9024.000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-3097
Loop Clamp

123153097
90094131: RNCC: 3 | RNVC: 2

11 Oct 1988

5340-12-198-5864
Mending Plate

121985864
2500138-200300.00: RNCC: 2 | RNVC: 2
2500138-200300.00: RNCC: 3 | RNVC: 2
2500138-200300.00: RNCC: 5 | RNVC: 9
2500138-200300.00: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-384-4303
Lock Bar

123844303
F1.1189-40-10-10.00-02: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-354-8909
Mounting Bracket

123548909
5400049-111820.14: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-12-178-7869
Retaining Strap

121787869
06670630206: RNCC: 3 | RNVC: 2
2X13-6M7-750-60A4C: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-340-5454
Mounting Bracket

123405454
5901423640: RNCC: 3 | RNVC: 2
5901423640: RNCC: 5 | RNVC: 2
590 142 36 40: RNCC: 5 | RNVC: 2
5901423640: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-172-6621
Dust And Moisture Seal Protective Cap-Plug

121726621
610U11: RNCC: 3 | RNVC: 2
0970112: RNCC: 5 | RNVC: 2
9560111100: RNCC: 5 | RNVC: 2
GPN610U11: RNCC: 5 | RNVC: 2
0056-039: RNCC: 5 | RNVC: 2
GPN610U11: RNCC: 5 | RNVC: 2
U11: RNCC: 5 | RNVC: 9
U11GPN610: RNCC: 5 | RNVC: 9
610001100: RNCC: 5 | RNVC: 9
GPN610,U11: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-354-3626
Corner Brace

123543626
00411829: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-12-011-6415

5340-12-340-3928
Resilient Mount

123403928
9894114: RNCC: 3 | RNVC: 9
463-6111600.000: RNCC: 5 | RNVC: 9

4 Apr 1996

5340-12-332-8686
Mounting Bracket

123328686
1890595-40010: RNCC: 3 | RNVC: 2

28 Sep 1993

5340-12-387-3549
Loop Clamp

123873549
2140284: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-378-3596
Double Angle Bracket

123783596
41229020: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-385-5370
Liquid Holding Unit Filler Neck

123855370
5580101966: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-353-7075
Access Cover

123537075
47365210500: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-385-3483
Roller Holder

123853483
4000008826: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-374-3650
Manual Control Lever

123743650
3NG2490444: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-12-317-5942
Rod End Connector

123175942
9141280029: RNCC: 3 | RNVC: 2
4128-01-12-00: RNCC: 5 | RNVC: 2

20 Apr 1989

5340-12-366-9736
Angle Bracket

123669736
2300421-181057.001: RNCC: 2 | RNVC: 2
2300421-181057.001: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-356-1716
Block Clamp

123561716
J29120251-001: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-350-3832
Doorstop

123503832
J52424538-001: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-392-6529
Extension Drawer Slide

123926529
DZ2601-0025: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-386-4095
Bumper

123864095
4090758-201110.03: RNCC: 3 | RNVC: 2
01141078: RNCC: 5 | RNVC: 2

31 Aug 2011

5340-12-393-7179
Clamping Catch

123937179
501.117L: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-180-3118
Bow Handle

121803118
581K0124: RNCC: 3 | RNVC: 2
02589866: RNCC: 5 | RNVC: 2
2589866EE5505-34: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-194-7756
Resilient Mount

121947756
1341104000: RNCC: 3 | RNVC: 2
3319.50427: RNCC: 5 | RNVC: 2
331950427: RNCC: 5 | RNVC: 2
B462K2BAM40G1: RNCC: 5 | RNVC: 2
2K2-BAM-40-G1: RNCC: 5 | RNVC: 2
2K2-BAM-40-G1: RNCC: 5 | RNVC: 9
2K2BAM40G1: RNCC: 5 | RNVC: 9
2K2BAM40G1: RNCC: 5 | RNVC: 9
B462K2BAM40G1: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-12-319-3310
Mending Plate

123193310
5803662-200020.00: RNCC: 2 | RNVC: 2
7802018220: RNCC: 3 | RNVC: 2
78020 18220: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-312-3324
Extension Drawer Slide

123123324
GC3630-1027: RNCC: 3 | RNVC: 2

17 Dec 1987

5340-12-185-0089
Access Cover

121850089
073370: RNCC: 3 | RNVC: 2
073370-452-40-01-16: RNCC: 5 | RNVC: 2
073370-452-40-01-16: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-12-352-5704
Webbing Strap

123525704
79017/026-1700-0300: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-700-2244
Nonmetallic Bumper

127002244
51-2611330010: RNCC: 2 | RNVC: 2
765-69-29: RNCC: 3 | RNVC: 2
765.69.29: RNCC: 3 | RNVC: 2

13 Nov 1991

5340-12-316-0002
Nonmetallic Bumper

123160002
1164760284: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-393-9441
Dust And Moisture Seal Protective Cap

123939441
7190537: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-12-358-9867
Dust And Moisture Seal Protective Cover

123589867
54.0094.277.00: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-12-371-0035
Mounting Bracket

123710035
02700243100 AND 3630000: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-12-310-7646
Access Cover

123107646
5800046-9162.01: RNCC: 2 | RNVC: 2
5800046-9162.01: RNCC: 3 | RNVC: 2
5800046-9162.01: RNCC: 5 | RNVC: 9

29 Jun 1987

5340-12-328-9416
Access Cover

123289416
42026987: RNCC: 3 | RNVC: 2
4202 6987: RNCC: 5 | RNVC: 2
42026987KZ5010-96: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-195-4213
Beam Gripping Clamp

121954213
97454844: RNCC: 3 | RNVC: 2
97454844: RNCC: 5 | RNVC: 9

23 Feb 1983

5340-12-148-4712

5340-12-025-5868

5340-12-306-8636
Catch Strike

123068636
544325032: RNCC: 3 | RNVC: 2

11 Apr 1986

5340-12-364-7786
Friction Catch Stud

123647786
54.0084.174.02: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-328-9459
Snap Hook

123289459
VE01456: RNCC: 3 | RNVC: 2
01456: RNCC: 5 | RNVC: 2
71097: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-350-2772
Door Handle

123502772
83626410002: RNCC: 3 | RNVC: 2

10 Mar 2000

5340-12-387-0134
Manual Control Lever

123870134
T251D4678210: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-12-198-1573
Mending Plate

121981573
RP981778: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-386-5368
Mounting Plate

123865368
1.314-201150.01: RNCC: 2 | RNVC: 2
1.314-201150.01: RNCC: 5 | RNVC: 2

8 Sep 2011

5340-12-348-9175
Block Clamp

123489175
1626-180200.003.0: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-025-0606

5340-12-326-4345
Loop Clamp

123264345
LN9490A5: RNCC: 2 | RNVC: 2

16 Sep 1991

5340-12-370-1742
Retaining Strap

123701742
65933: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-12-176-3276
Loop Clamp

121763276
LN9490B40: RNCC: 2 | RNVC: 2

23 Nov 1978

5340-12-303-0400
Angle Bracket

123030400
4254201786: RNCC: 3 | RNVC: 2

21 Feb 1985

5340-12-360-1298
Mounting Bracket

123601298
9424306010: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-356-0198
Loop Clamp

123560198
EN4114F17WH1: RNCC: 2 | RNVC: 2

15 Jan 2002

5340-12-355-5761
Webbing Strap

123555761
17.108.3713.04: RNCC: 2 | RNVC: 2
17.108.3713.04: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-022-9404

5340-12-369-6620
Manual Control Lever

123696620
63043: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-390-0626
Access Cover

123900626
DF 407 281 AE: RNCC: 3 | RNVC: 2
DF 407 281 AE: RNCC: 5 | RNVC: 2

28 Sep 2012

5340-12-042-0996

5340-12-323-7986
Escutcheon Plate

123237986
6645Z-STAHL,VERZINKT: RNCC: 3 | RNVC: 2

19 Dec 1990

5340-12-316-2390
Angle Bracket

123162390
3878910531: RNCC: 3 | RNVC: 2

3 Jan 1989

5340-12-386-3003
Dust And Moisture Seal Protective Cap

123863003
800567: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-12-343-1925
Mounting Bracket

123431925
13826020: RNCC: 3 | RNVC: 2
93160469: RNCC: 5 | RNVC: 2

15 May 1997

5340-12-041-0863

5340-12-340-0626
Access Cover

123400626
5655201: RNCC: 3 | RNVC: 2
EZ56552: RNCC: 5 | RNVC: 2

22 Feb 1996

5340-12-339-5798
Key Holder

123395798
52017100: RNCC: 3 | RNVC: 9

7 Dec 1995

5340-12-026-1038

5340-12-701-1765
Mounting Bracket

127011765
VG95211-ML-127011765: RNCC: 2 | RNVC: 2
5.12.0246.0220.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-146-7267
Catch Strike

121467267
DIN3133-K30X107BK: RNCC: 2 | RNVC: 2
6020118: RNCC: 3 | RNVC: 2
25704-190413T4: RNCC: 5 | RNVC: 2
TW931-2021-14: RNCC: 5 | RNVC: 2
DIN3133-3-130BK: RNCC: 5 | RNVC: 2
DIN3133-K30X107-BK: RNCC: 5 | RNVC: 2
51176: RNCC: 5 | RNVC: 2
25704-190413T4: RNCC: 5 | RNVC: 9
DIN3133-B30: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-5796
Dust And Moisture Seal Protective Plug

121785796
900A11: RNCC: 3 | RNVC: 2
900001100: RNCC: 5 | RNVC: 2
A11GPN900: RNCC: 5 | RNVC: 2
GPN900,A11: RNCC: 5 | RNVC: 2
GPN900A11: RNCC: 5 | RNVC: 2

3 May 1979

5340-12-382-3994
Lock Spindle

123823994
200-9112: RNCC: 3 | RNVC: 2

15 Jun 2010

5340-12-365-6479
Doorknob

123656479
3553 18041: RNCC: 3 | RNVC: 2

21 Jan 2005

5340-12-380-8735
Mounting Bracket

123808735
8909990142: RNCC: 3 | RNVC: 2

8 Dec 2009

5340-12-361-4342
Loop Clamp

123614342
1504310: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-380-4713
Mending Plate

123804713
NO1284: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-385-4660
Angle Bracket

123854660
5841533640: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-394-4402
Antipilferage Seal Locking Wire

123944402
K04279: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-340-1549
Mounting Bracket

123401549
81418606060: RNCC: 3 | RNVC: 2
81.41860.6060: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-374-7673
Multiple Angle Bracket

123747673
G24300-N5300-Y912: RNCC: 3 | RNVC: 2
G24300-N5300-Y912: RNCC: 5 | RNVC: 9

18 Mar 2008

5340-12-354-5951
Dust And Moisture Seal Protective Plug

123545951
10066: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-365-2607
Section Block Clamp

123652607
300.040.711: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-349-2838
Butt Hinge Leaf

123492838
J52423522-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-359-7643
Spacing Threaded Standoff

123597643
T631P3003130: RNCC: 3 | RNVC: 2
T631P3003130: RNCC: 5 | RNVC: 9

10 Mar 2003

5340-12-090-4325

5340-12-372-3436
Mounting Bracket

123723436
15004788: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-12-011-4918

5340-12-393-6625
Bumper

123936625
227896: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-357-6242
Nonmetallic Bumper

123576242
0019877540: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-153-6535

5340-12-180-9589
Bridge Clamp

121809589
02332: RNCC: 3 | RNVC: 2
02332: RNCC: 5 | RNVC: 9

12 Oct 1979

5340-12-365-7555
Cushioning Pad

123657555
CBD45419P16: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-325-6559
Mounting Plate

123256559
3012930240: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-327-2887
Bail Handle

123272887
0448602: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-12-175-3207
Dust And Moisture Seal Protective Cap

121753207
8980120004: RNCC: 3 | RNVC: 2
02964621: RNCC: 5 | RNVC: 2
2964621EY5157-55: RNCC: 5 | RNVC: 2

11 Sep 1978

5340-12-372-4998
Butt Hinge

123724998
10060038: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-320-9966
Kunst Gleitschiene

123209966
9000 1125: RNCC: 3 | RNVC: 2

14 Mar 1990

5340-12-090-7019

5340-12-187-6156
Mounting Bracket

121876156
5800700740: RNCC: 3 | RNVC: 2

21 Apr 1981

5340-12-357-0094
Mounting Bracket

123570094
8812030144: RNCC: 2 | RNVC: 2
8812030144: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-377-3761
Mounting Bracket

123773761
41244702: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-325-1547
Manual Control Lever

123251547
04410-45: RNCC: 3 | RNVC: 2
441-45: RNCC: 5 | RNVC: 9
NLM441-45: RNCC: 5 | RNVC: 9
NLM4410-45: RNCC: 5 | RNVC: 9

8 May 1991

5340-12-356-1861
Dust And Moisture Seal Protective Cap

123561861
623.01453-4B: RNCC: 3 | RNVC: 2
21417: RNCC: 5 | RNVC: 2
01453: RNCC: 5 | RNVC: 2

30 Jan 2002

5340-12-701-9777
Retaining Strap

127019777
VG95211-ML-127019777: RNCC: 2 | RNVC: 2
115N464-726: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-2762
Loop Clamp

123072762
B12/10B12/16/25BX111TAN15836: RNCC: 3 | RNVC: 2
B12/10B12/16/25BX111TAN15836: RNCC: 3 | RNVC: 2
B12-10B12-16-25BX111TAN15836: RNCC: 5 | RNVC: 2
B12-10B12-16-25BX111TAN15836: RNCC: 5 | RNVC: 2

28 May 1986

5340-12-343-4109
Lock-Release Lever

123434109
02208.50: RNCC: 3 | RNVC: 2
WDS117-255X50: RNCC: 5 | RNVC: 2

17 Jun 1997

5340-12-356-5079
Mounting Bracket

123565079
J92220346-001: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-321-4047
Double Angle Bracket

123214047
5801846-1131.001: RNCC: 2 | RNVC: 2
5801846-1131.001: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-334-8166
Nonmetallic Solid Wheel

123348166
4900123-1020.05: RNCC: 2 | RNVC: 2
4900123-1020.05: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-342-8707
Loop Clamp

123428707
DIN3015-L-KP-5-G-32-PP: RNCC: 2 | RNVC: 2
RAPG-532: RNCC: 3 | RNVC: 2
532PPH: RNCC: 3 | RNVC: 2
5017-233: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-12-346-6908
Dust And Moisture Seal Protective Cap

123466908
000-964-37-16: RNCC: 3 | RNVC: 2
000-964-37-16: RNCC: 5 | RNVC: 2

26 Aug 1998

5340-12-339-2889
Clamping Catch

123392889
1000192-03 2 83000.01: RNCC: 2 | RNVC: 2
1000192-03 2 83000.01: RNCC: 3 | RNVC: 2
1000192-03 2 83000.01: RNCC: 5 | RNVC: 9

6 Nov 1995

5340-12-312-5290
Mending Plate

123125290
P-087196-005: RNCC: 3 | RNVC: 2
P087196-005: RNCC: 5 | RNVC: 2

14 Jan 1988

5340-12-700-3040
Nonmetallic Bumper

127003040
51-200869004: RNCC: 2 | RNVC: 2
2A28/7-7: RNCC: 3 | RNVC: 2
2A28-7-7: RNCC: 5 | RNVC: 9

6 Dec 1991

5340-12-366-4259
Mounting Bracket

123664259
2 0071-185: RNCC: 3 | RNVC: 2
2 0071-185: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-12-197-5864
Mending Plate

121975864
A-231150-005: RNCC: 3 | RNVC: 2
A231150-005: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-303-9912
Bow Handle

123039912
8450030019: RNCC: 3 | RNVC: 2
84500 30019: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-349-1760
Access Cover

123491760
181741001: RNCC: 2 | RNVC: 2
181741001: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-189-1847
Mounting Bracket

121891847
8331595940: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-170-2505
Retaining Strap

121702505
PAN4231EEE5422: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-300-2695
Mending Plate

123002695
A11A121110451: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-361-0423
Stand Base

123610423
1120-147: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-197-7468
Plug Button

121977468
3531201: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-320-8749
Retaining Strap

123208749
8935111104: RNCC: 3 | RNVC: 9

28 Feb 1990

5340-12-363-6488
Spring Tension Clip

123636488
0009932615: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-12-361-9451
Mounting Bracket

123619451
6500460: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-12-161-6733
Friction Catch

121616733
1213-223: RNCC: 3 | RNVC: 2
1213-223: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-010-6776

5340-12-305-5826
Nonmetallic Bumper

123055826
CF 471 224: RNCC: 3 | RNVC: 2

25 Nov 1985

5340-12-094-4342

5340-12-022-5106

5340-12-367-1251
Loop Clamp

123671251
0420101524020: RNCC: 3 | RNVC: 2
5001865009: RNCC: 5 | RNVC: 2

11 Jul 2005

5340-12-315-8858
Angle Bracket

123158858
4614920241: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-374-3832
Bumper

123743832
L521M3041211: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-318-6997
Door Button

123186997
4355900287: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-12-315-1222
Mounting Bracket

123151222
10123286600: RNCC: 3 | RNVC: 2
000 545 01 49: RNCC: 5 | RNVC: 2
0005450149: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-304-9736
Spring Tension Clip

123049736
SC0-5551: RNCC: 3 | RNVC: 2
3099880078: RNCC: 5 | RNVC: 2
SC05551: RNCC: 5 | RNVC: 2

12 Sep 1985

5340-12-302-1485
Angle Bracket

123021485
5801998-270000.03: RNCC: 2 | RNVC: 2
5801998-270000.03: RNCC: 3 | RNVC: 2
5801998-270000.03: RNCC: 5 | RNVC: 9

6 Dec 1984

5340-12-352-8135
Mounting Plate

123528135
5400049-128330.03: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-12-359-8350
Mending Plate

123598350
1361044-12220-02: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-338-8484
Handle Grip

123388484
SZ2485000: RNCC: 3 | RNVC: 2
SZ 2485: RNCC: 5 | RNVC: 2
SZ2485: RNCC: 5 | RNVC: 2
88-5003: RNCC: 5 | RNVC: 2

31 Aug 1995

5340-12-308-7908
Access Cover

123087908
1281-16200.06: RNCC: 2 | RNVC: 2
159421: RNCC: 3 | RNVC: 2
1281-16200.06: RNCC: 5 | RNVC: 2

18 Nov 1986

5340-12-368-4176
Section Block Clamp

123684176
PAN4274-12: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-12-310-0462
Dust And Moisture Seal Protective Plug

123100462
910/2179: RNCC: 3 | RNVC: 2
GPN910-2179: RNCC: 5 | RNVC: 2
910217900: RNCC: 5 | RNVC: 2
94.995: RNCC: 5 | RNVC: 2
138993: RNCC: 5 | RNVC: 2

1 Apr 1987

5340-12-325-5155
Dust And Moisture Seal Boot

123255155
4162342: RNCC: 3 | RNVC: 2
5014-017: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-12-340-0597
Door Hook

123400597
ZN4260-702: RNCC: 3 | RNVC: 2
8499880002: RNCC: 5 | RNVC: 2

22 Feb 1996

5340-12-351-7622
Dust And Moisture Seal Protective Plug

123517622
EN3789-10: RNCC: 2 | RNVC: 2

21 Aug 2000

5340-12-318-5108
Mending Plate

123185108
23182-7000.06: RNCC: 3 | RNVC: 2
29653: RNCC: 5 | RNVC: 2
23182-7000.06: RNCC: 5 | RNVC: 2
23182-7000.06: RNCC: 5 | RNVC: 9

21 Jul 1989

5340-12-349-0957
Butt Hinge Leaf

123490957
NO PRIMARY REF 12-349-0957: RNCC: 3 | RNVC: 2
J52822821-001: RNCC: 5 | RNVC: 9

23 Sep 1999

5340-12-342-6658
Butt Hinge Leaf

123426658
101.101704: RNCC: 3 | RNVC: 2
10.1704: RNCC: 5 | RNVC: 9
101.10.1704: RNCC: 5 | RNVC: 9

13 Mar 1997

5340-12-354-5156
Swivel Caster

123545156
LK-STARU-BS100RO-TF: RNCC: 3 | RNVC: 2

24 Jul 2001

5340-12-339-5270
Catch Strike

123395270
DIN3133-G18X45ZN8: RNCC: 2 | RNVC: 2
G18X45DIN3133-ST-ZN8: RNCC: 5 | RNVC: 2
DIN3133-G18X45-ZN8: RNCC: 5 | RNVC: 2

30 Nov 1995

5340-12-305-2028
Metal Runner

123052028
5801763-010000.001: RNCC: 2 | RNVC: 2
5801763-010000.001: RNCC: 3 | RNVC: 2

7 Oct 1985

5340-12-702-2060
Mounting Plate

127022060
VG95211-ML-127022060: RNCC: 2 | RNVC: 2
30.7211.420: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-305-9929
Mending Plate

123059929
5801761-120000.002: RNCC: 2 | RNVC: 2
5801761-120000.002: RNCC: 3 | RNVC: 2

17 Jan 1986

5340-12-154-5904
Angle Bracket

121545904
BD2-521: RNCC: 3 | RNVC: 9
BD0002T521: RNCC: 5 | RNVC: 2
BD0002T521: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-169-4641
Loop Clamp

121694641
PAN4263-10: RNCC: 3 | RNVC: 2

18 May 1977

5340-12-199-7633
Helical Compression Spring Retainer

121997633
F01-167-07: RNCC: 3 | RNVC: 2

29 May 1984

5340-12-181-4504
Electrical-Mechanical Equipment Post

121814504
VG95148B13XM8X50-ST: RNCC: 2 | RNVC: 2
VG95148B13XM8X50-ST: RNCC: 3 | RNVC: 2
2163782EF0150-57: RNCC: 3 | RNVC: 2
0216 3782: RNCC: 5 | RNVC: 2
2163782: RNCC: 5 | RNVC: 9

22 Nov 1979

5340-12-355-7431
Angle Bracket

123557431
4618604614: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-12-319-5838
Mounting Plate

123195838
105-45071.15: RNCC: 3 | RNVC: 2

13 Oct 1989

5340-12-315-3023
Mounting Bracket

123153023
4031442740: RNCC: 3 | RNVC: 2
403 144 27 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-381-5982
Dust And Moisture Seal Protective Plug

123815982
82960020054: RNCC: 3 | RNVC: 2
82.96002.0054: RNCC: 5 | RNVC: 2

9 Mar 2010

5340-12-320-1185
Kunst Gleitschiene

123201185
1083401: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-359-9439
Dust And Moisture Seal Protective Plug

123599439
04167010: RNCC: 3 | RNVC: 2
05821265: RNCC: 5 | RNVC: 2

21 Mar 2003

5340-12-174-6106
Platte

121746106
610186LI: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-12-308-6325
Electrical-Mechanical Equipment Post

123086325
7084601: RNCC: 3 | RNVC: 2

30 Oct 1986

5340-12-328-9095
Loop Clamp

123289095
2653-330130.00: RNCC: 1 | RNVC: 2
2653-330130.00: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-349-4493
Flush Lock

123494493
580B387: RNCC: 3 | RNVC: 2
T521M10X1001: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-12-359-6870
Mounting Bracket

123596870
9454290640: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-325-8986
Protection Bellows

123258986
3962680096: RNCC: 3 | RNVC: 2

19 Jul 1991

5340-12-349-7830
Retaining Strap

123497830
T290M2202266: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-309-8039
Mending Plate

123098039
71-11064-02: RNCC: 3 | RNVC: 2

4 Mar 1987

5340-12-177-1201
Butt Hinge Leaf

121771201
81658042004: RNCC: 3 | RNVC: 2
81.65804-2004: RNCC: 5 | RNVC: 2
E00001213006: RNCC: 5 | RNVC: 2
00001213006: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-337-7906
Multiple Angle Bracket

123377906
465-064000.001: RNCC: 3 | RNVC: 9
9893582: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-12-342-2729
Helical Compression Spring Seat

123422729
418785 201 11 07 90: RNCC: 3 | RNVC: 2
P36288-40R: RNCC: 5 | RNVC: 2
R3628840: RNCC: 5 | RNVC: 2
R63288-40: RNCC: 5 | RNVC: 2
F300 0T 019 2813: RNCC: 6 | RNVC: 9

14 Jan 1997

5340-12-383-5001
Clamping Catch

123835001
10F25576630: RNCC: 3 | RNVC: 2
DKV-340-01-00: RNCC: 5 | RNVC: 2

28 Oct 2010

5340-12-306-4014
Mending Plate

123064014
V22.917.390217-01: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-371-8999
Retaining Clip

123718999
TL5120-0037-11: RNCC: 2 | RNVC: 2
L934850: RNCC: 3 | RNVC: 2

29 May 2007

5340-12-313-3321
Pad Eye

123133321
23182-9507.01: RNCC: 2 | RNVC: 2
23182-9507.01: RNCC: 3 | RNVC: 2

23 Mar 1988

5340-12-164-4547
Retaining Strap

121644547
4229950042: RNCC: 3 | RNVC: 2
4039950042: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-3587
Angle Bracket

123503587
160-88118: RNCC: 3 | RNVC: 2
160-88118: RNCC: 5 | RNVC: 2

21 Mar 2000

5340-12-383-5140
Access Cover

123835140
1603010: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-12-188-6910
Hasp Staple

121886910
81.66740.0017: RNCC: 3 | RNVC: 2
81667400017: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-330-0185
Loop Clamp

123300185
LN9491BK13: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-391-4656
Headless Straight Rod

123914656
I001667: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-315-1153
Webbing Strap

123151153
2300174-970343: RNCC: 2 | RNVC: 2

17 Sep 1988

5340-12-125-0375
Ring

5340-12-140-8565
Verbindungs Platte

5340-12-131-4670
Karabiner- Haken

5340-12-344-1867
Mounting Bracket

123441867
2996.73.57: RNCC: 3 | RNVC: 2
2996.7357: RNCC: 5 | RNVC: 2

24 Sep 1997

5340-12-393-5501
Helical Compression Spring Seat

123935501
T60006R080714: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-393-2939
Bumper

123932939
SK2006: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-386-2052
Shimmy Damper

123862052
0501 212 759: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-387-3544
Bumper

123873544
48560706165: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-333-1254
Access Cover

123331254
88371020001: RNCC: 3 | RNVC: 2
88.37102.0001: RNCC: 5 | RNVC: 2

2 Nov 1993

5340-12-163-0034
Retaining Strap

121630034
5909953968: RNCC: 3 | RNVC: 2
5909953968: RNCC: 5 | RNVC: 2
5909953968: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-349-8484
Mounting Plate

123498484
A1Z10283924: RNCC: 2 | RNVC: 2
A1Z10283924: RNCC: 3 | RNVC: 2
20361701: RNCC: 5 | RNVC: 2

17 Jan 2000

5340-12-308-6792
Resilient Mount

123086792
28202232912: RNCC: 3 | RNVC: 2
8202232912: RNCC: 3 | RNVC: 2

7 Nov 1986

5340-12-320-7334
Angle Bracket

123207334
54.0062.980.04: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-198-1311
Catch Strike

121981311
DIN3133-K15X46-SW: RNCC: 2 | RNVC: 2
0633600: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-332-6725
Loop Clamp

123326725
15857: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-12-366-7307
Mounting Bracket

123667307
BD5.250.862.230: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-320-7209
Access Cover

123207209
CF 454 476 AE: RNCC: 2 | RNVC: 2
CF 454 476 AE: RNCC: 3 | RNVC: 2
CF 454 476 AE: RNCC: 5 | RNVC: 2

9 Feb 1990

5340-12-167-7834
Mending Plate

121677834
2217028708: RNCC: 3 | RNVC: 2
22170 28708: RNCC: 5 | RNVC: 9

19 Jan 1977

5340-12-330-3171
Headless Straight Rod

123303171
5219A015: RNCC: 2 | RNVC: 2
5219A015: RNCC: 3 | RNVC: 2
5219A015: RNCC: 5 | RNVC: 2
5219A015: RNCC: 5 | RNVC: 2
5219A015: RNCC: 5 | RNVC: 9

2 Dec 1992

5340-12-333-5211
Zugangs- Deckel

5340-12-331-9619
Access Cover

123319619
1249 301 068: RNCC: 3 | RNVC: 2
7381915: RNCC: 5 | RNVC: 2
1249301068: RNCC: 5 | RNVC: 2
5000242304: RNCC: 5 | RNVC: 2
1249301068: RNCC: 5 | RNVC: 9

9 Jul 1993

5340-12-353-8841
Door Holder

123538841
209436: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-365-0687
Double Angle Bracket

123650687
4606200614: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-319-7715
Nonmetallic Bumper

123197715
64 035 025A: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-12-158-7536
Mending Plate

121587536
8370781141: RNCC: 3 | RNVC: 2
600611: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-360-9341
Spacing Threaded Standoff

123609341
12859002: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-380-5357
Access Cover

123805357
S533M6034215: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-092-0932

5340-12-353-1568
Mounting Bracket

123531568
5062302740: RNCC: 3 | RNVC: 2
506 230 27 40: RNCC: 5 | RNVC: 2

5 Feb 2001

5340-12-367-3046
Loop Clamp

123673046
14.45.280: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-12-318-1628
Loop Clamp

123181628
54.0026.895.00: RNCC: 3 | RNVC: 2
54002689500: RNCC: 5 | RNVC: 2

16 Jun 1989

5340-12-318-0182
Multiple Angle Bracket

123180182
81256020009: RNCC: 3 | RNVC: 2
81.25602.0009: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-190-6675
Door Holder

121906675
YN161-9251ITEM7: RNCC: 3 | RNVC: 2
YN161-9251ITEM 7: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-165-6828
Retaining Strap

121656828
2225514: RNCC: 3 | RNVC: 2
2225-51-4: RNCC: 5 | RNVC: 2

15 Jun 1976

5340-12-339-4000
Access Cover

123394000
2500253-196700.002.0: RNCC: 2 | RNVC: 2
2500253-196700.002.0: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-12-327-8102
Mending Plate

123278102
C42080-A34-C51: RNCC: 2 | RNVC: 2
C42080-A34-C51: RNCC: 3 | RNVC: 2

7 Mar 1992

5340-12-352-2171
Retaining Strap

123522171
J28230089-001: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-198-5592
Angle Bracket

121985592
NO PRIMARY REF 12-198-5592: RNCC: 3 | RNVC: 2
5514 123844: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-164-6025
Casement Fastener

121646025
681-22220: RNCC: 3 | RNVC: 2
681-22220: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-4149
Hand Crank

123074149
790-17.15.000-02: RNCC: 3 | RNVC: 2

13 Jun 1986

5340-12-347-6024
Mounting Bracket

123476024
8854 130-141: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-354-9600
Mounting Plate

123549600
SK161282-601: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-12-316-1988
Lock-Release Lever

123161988
4900286-201120.00: RNCC: 2 | RNVC: 2
4900286-201120.00: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-164-6854
Compression Cup

121646854
369015120: RNCC: 3 | RNVC: 2
FB04-0022-0006: RNCC: 3 | RNVC: 2
PTFEMANSCHETTE45X22X4: RNCC: 5 | RNVC: 2
15120: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-8864
Helical Compression Spring Seat

123108864
03571900: RNCC: 3 | RNVC: 2

6 Jul 1987

5340-12-187-6687
Door Button

121876687
81971505007: RNCC: 3 | RNVC: 2
81.97150.5007: RNCC: 5 | RNVC: 2
81.97150.5007: RNCC: 5 | RNVC: 9
BK7018: RNCC: 5 | RNVC: 9

27 Apr 1981

5340-12-300-7463
Nonmetallic Bumper

123007463
A11A532440005: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-316-7577
Kunst Gleitschiene

123167577
5800777-8220.06: RNCC: 2 | RNVC: 2
5800777-8220.06: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-366-5840
Webbing Strap

123665840
4618902294: RNCC: 3 | RNVC: 2

11 May 2005

5340-12-301-4342
Pad Eye

123014342
5210263402: RNCC: 3 | RNVC: 2

13 Oct 1984

5340-12-353-2159
Retaining Strap

123532159
19005324: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-381-6326
Rod End Connector

123816326
2902310016: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-12-159-5961
Butt Hinge

121595961
31-5030-046: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-171-3316
Expansion Plug

121713316
81916010016: RNCC: 3 | RNVC: 2
81.91601-0016: RNCC: 5 | RNVC: 2
1480559026: RNCC: 5 | RNVC: 2

30 Sep 1977

5340-12-177-2494
Retaining Strap

121772494
PAN4286-50: RNCC: 3 | RNVC: 2

22 Jan 1979

5340-12-177-6973
Retaining Strap

121776973
1000086-101200.04: RNCC: 2 | RNVC: 2
1000086-101200.04: RNCC: 3 | RNVC: 2
1000086-101200-04: RNCC: 5 | RNVC: 9
1000086-101200.04: RNCC: 5 | RNVC: 9
1000086-101200-04: RNCC: 5 | RNVC: 9
1000086-101200-04: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-350-4457
Section Block Clamp

123504457
J29120352-005: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-366-5721
Spring Loaded Cylinder Fastener

123665721
2212.208: RNCC: 3 | RNVC: 2
EH2212-208: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-361-6750
Webbing Strap

123616750
5085-002550A00C: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-372-4672
Dust And Moisture Seal Protective Cap

123724672
6000900262: RNCC: 3 | RNVC: 2
81.96002-0522: RNCC: 5 | RNVC: 2
81960020522: RNCC: 5 | RNVC: 2

19 Jul 2007

5340-12-363-8485
Mounting Bracket

123638485
J32320321-401: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-370-8026
Snap-In Threaded Standoff

123708026
81910200735: RNCC: 3 | RNVC: 2
81.91020-0735: RNCC: 5 | RNVC: 2

21 Dec 2006

5340-12-191-0709
Dust And Moisture Seal Protective Cap

121910709
1404CLK-M4-SCHWARZ: RNCC: 3 | RNVC: 2
1404CLK SCHWARZ: RNCC: 5 | RNVC: 2
1404CLK: RNCC: 5 | RNVC: 2

11 Jan 1982

5340-12-386-2821
Access Cover

123862821
009-221.100-015: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-12-366-0131
Mounting Bracket

123660131
9436101336: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-365-8538
Nut And Bolt Locking Plate

123658538
14888: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-174-9165
Flush Lock

121749165
0309944737: RNCC: 3 | RNVC: 9
0309944737: RNCC: 5 | RNVC: 9
309944737: RNCC: 5 | RNVC: 9
309944737: RNCC: 5 | RNVC: 9

7 Aug 1978

5340-12-148-1654
Rod End Clevis

121481654
DIN71752-G14X28-C15E: RNCC: 2 | RNVC: 2
DIN71752-G14X28-C15E: RNCC: 3 | RNVC: 2
G14X28DIN71752C15E: RNCC: 3 | RNVC: 2
DIN71752-G14X28-C15E: RNCC: 3 | RNVC: 2
100200140028/001-C15E: RNCC: 5 | RNVC: 2
G14X28DIN71752C15E: RNCC: 5 | RNVC: 2
DIN71752-G14X28-C15E: RNCC: 5 | RNVC: 2
100200140028/001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-149-5429
Compression Cup

121495429
TDUOH90-23 90X12X35-90NBR/108: RNCC: 3 | RNVC: 2
TDU0H90-23: RNCC: 5 | RNVC: 2
TDU0H90-23-90NBR108: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-1330
Mounting Plate

123681330
5161-390000A01B: RNCC: 2 | RNVC: 2
5161-390000A01B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-324-0938
Double Angle Bracket

123240938
5801408-22405.001: RNCC: 2 | RNVC: 2
5801408-22405.001: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-12-199-5337
Nonmetallic Bumper

121995337
2500057-506000.02: RNCC: 2 | RNVC: 2
2500057-506000.02: RNCC: 3 | RNVC: 2
2500057-506000.02: RNCC: 3 | RNVC: 2
2500057-506000.02: RNCC: 3 | RNVC: 2
2500057-506000.02: RNCC: 3 | RNVC: 2
PLATTE 240X35X3-CR75: RNCC: 5 | RNVC: 2
2500057-506000.02: RNCC: 5 | RNVC: 9
2500057-506000-02: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-172-7203
Mending Plate

121727203
4592038261: RNCC: 3 | RNVC: 2
23290-033260-004: RNCC: 5 | RNVC: 9
23290-033260.004: RNCC: 5 | RNVC: 9

14 Feb 1978

5340-12-384-3972
Mounting Plate

123843972
41030384: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-12-040-1335

5340-12-340-3300
Mounting Bracket

123403300
6707430221: RNCC: 3 | RNVC: 2
670 743 02 21: RNCC: 5 | RNVC: 2

26 Mar 1996

5340-12-389-0669
Expansion Shield

123890669
062010: RNCC: 3 | RNVC: 2
07401301: RNCC: 5 | RNVC: 2
062010: RNCC: 5 | RNVC: 2
2500601082: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-179-5671
Double Angle Bracket

121795671
81624602005: RNCC: 3 | RNVC: 2
81.62460.2005: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-130-9247
Nonmetallic Bumper

121309247
6175601: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-191-8966
Resilient Mount

121918966
PAN5173C02: RNCC: 3 | RNVC: 2

16 Mar 1982

5340-12-315-3799
Screw Hook

123153799
3700012H-RECHTS-TZN600: RNCC: 3 | RNVC: 2

18 Oct 1988

5340-12-380-2367
Access Cover

123802367
4000017-181943.000: RNCC: 2 | RNVC: 2
4000017-181943.000: RNCC: 3 | RNVC: 2

8 Oct 2009

5340-12-370-5657
Rod End Clevis

123705657
ED41-2098-00040-111: RNCC: 2 | RNVC: 2
ED41-2098-00040-111: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-12-194-5034
Lock-Release Lever

121945034
5800686-1127: RNCC: 3 | RNVC: 2

10 Nov 1982

5340-12-179-6717
Loop Clamp

121796717
4199159: RNCC: 3 | RNVC: 2
S12BE03-01-34-000: RNCC: 5 | RNVC: 2

16 Jul 1979

5340-12-318-7918
Angle Bracket

123187918
5803667-12000: RNCC: 2 | RNVC: 2
7802004120: RNCC: 3 | RNVC: 2
5803667-12000: RNCC: 5 | RNVC: 2
78020 04120: RNCC: 5 | RNVC: 9

17 Aug 1989

5340-12-322-2350
Electrical-Mechanical Equipment Post

123222350
54.1058.390.03: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-358-6852
Runner

123586852
EZ102473: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-314-5460
Dust And Moisture Seal Protective Plug

123145460
0009978786: RNCC: 3 | RNVC: 2
4B76527: RNCC: 3 | RNVC: 2
000 997 87 86: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-315-1151
Double Angle Bracket

123151151
2300174-970260: RNCC: 2 | RNVC: 2

17 Sep 1988

5340-12-317-0682
Mounting Bracket

123170682
6171870640: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-359-2455
Threaded Rod End

123592455
VS8550T014: RNCC: 3 | RNVC: 2
VS8550T014: RNCC: 5 | RNVC: 9

15 Jan 2003

5340-12-362-2845
Loop Clamp

123622845
LN9490BM17: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-303-6384
Resilient Mount

123036384
81962106035: RNCC: 3 | RNVC: 2
B3003510: RNCC: 3 | RNVC: 9
81.96210.6035: RNCC: 5 | RNVC: 2

16 Apr 1985

5340-12-364-2451
Mounting Bracket

123642451
4183320340: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-163-6105

5340-12-020-7309

5340-12-393-8328
Mounting Plate

123938328
160-24966-43: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-333-4167
Plug Button

123334167
33707: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-342-7926
Dust And Moisture Seal Protective Cap

123427926
4274 139: RNCC: 3 | RNVC: 2

1 Apr 1997

5340-12-023-3100

5340-12-312-6803
Pad Eye

123126803
1068949: RNCC: 2 | RNVC: 2
1068949: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-12-176-6077
Mending Plate

121766077
183807289: RNCC: 3 | RNVC: 2

11 Dec 1978

5340-12-175-8550
Mending Plate

121758550
51974800184: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-305-4635
Metal Runner

123054635
5801758-4700.01: RNCC: 2 | RNVC: 2
5801758-4700.01: RNCC: 3 | RNVC: 2

8 Nov 1985

5340-12-300-9098
Sash Pole

123009098
4703UND4711-150MM: RNCC: 3 | RNVC: 2

11 Sep 1984

5340-12-319-3831
Mending Plate

123193831
5801411-2714: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-350-4050
Mechanic Equipment Hardware Kit

123504050
21101-371: RNCC: 3 | RNVC: 2

28 Mar 2000

5340-12-360-1307
Mounting Bracket

123601307
9424602435: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-301-2107
Flush Lock

123012107
3814600004: RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-355-4308
Flush Lock

123554308
13.304.00.23: RNCC: 3 | RNVC: 2
7006857: RNCC: 5 | RNVC: 2

14 Nov 2001

5340-12-309-3098
Dust And Moisture Seal Protective Cap

123093098
060359: RNCC: 3 | RNVC: 2
06.71819.0116: RNCC: 5 | RNVC: 2

13 Jan 1987

5340-12-379-6417
Dust And Moisture Seal Protective Cap

123796417
976148: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-185-4522
Angle Bracket

121854522
1626756-1M: RNCC: 3 | RNVC: 2

7 Oct 1980

5340-12-179-9826
Webbing Strap

121799826
3818900594: RNCC: 3 | RNVC: 2

14 Aug 1979

5340-12-361-0837
Angle Bracket

123610837
J27620019-003: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-347-7348
Permanent Magnet

123477348
0018-4877-050: RNCC: 3 | RNVC: 2
0018-4877-050: RNCC: 5 | RNVC: 9

3 Feb 1999

5340-12-174-1936
Resilient Mount

121741936
DIN95367-A1-NR55-ST: RNCC: 2 | RNVC: 2
077-10-1960: RNCC: 5 | RNVC: 2
38451BSTN5590: RNCC: 5 | RNVC: 2
81700.NR55.ST: RNCC: 5 | RNVC: 2
DACHELEMENT-KLEIN-55NR/ST: RNCC: 5 | RNVC: 2
711001-NR55.ST: RNCC: 5 | RNVC: 2
38451SM550: RNCC: 5 | RNVC: 2
38451,NR55ST: RNCC: 5 | RNVC: 2
VG95367-A1-NR55ST: RNCC: 5 | RNVC: 9
38451SM550: RNCC: 5 | RNVC: 9

12 Jun 1978

5340-12-377-2182
Mending Plate

123772182
312902: RNCC: 3 | RNVC: 2
5183-16-10-11/37: RNCC: 5 | RNVC: 2

17 Dec 2008

5340-12-330-4903
Nonmetallic Bumper

123304903
247: RNCC: 3 | RNVC: 2
5M 6668.220-15: RNCC: 5 | RNVC: 2
5M6668-220-15: RNCC: 5 | RNVC: 2
ART.247: RNCC: 5 | RNVC: 2
NR. 247: RNCC: 5 | RNVC: 2

22 Dec 1992

5340-12-180-0305
Nonmetallic Bumper

121800305
2300109-188005.013.0: RNCC: 2 | RNVC: 2
2300109-188005.013.0: RNCC: 3 | RNVC: 2
2300109-188005.013.0: RNCC: 3 | RNVC: 2
2300109-188005.013.0: RNCC: 3 | RNVC: 2
2300109-188005-013-0: RNCC: 5 | RNVC: 2
2300109-188005-013-0: RNCC: 5 | RNVC: 9
2300109-188005.013.0: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-12-331-6310
Angle Bracket

123316310
702-147700-907-0: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-12-356-8448
Angle Bracket

123568448
ED88-0100-01001-117: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-375-6887
Access Cover

123756887
397-012-008: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-314-1625
Double Angle Bracket

123141625
4354267640: RNCC: 3 | RNVC: 2
435 426 76 40: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-316-7576
Kunst Gleitschiene

123167576
5800777-8220.05: RNCC: 2 | RNVC: 2
5800777-8220.05: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-375-4455
Webbing Strap

123754455
T15037: RNCC: 3 | RNVC: 2

3 Jun 2008

5340-12-314-0984
Spring Tension Clip

123140984
RFK 11855 ZI GE: RNCC: 3 | RNVC: 2
15122051: RNCC: 5 | RNVC: 2
15122051: RNCC: 5 | RNVC: 2
15122051: RNCC: 5 | RNVC: 2

7 Jun 1988

5340-12-184-0287
Mending Plate

121840287
183801981: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-12-302-1365
Nonmetallic Bumper

123021365
4178903: RNCC: 3 | RNVC: 2
S12B.F01.13.00.004: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-375-2123
Access Cover

123752123
L282M2006222: RNCC: 3 | RNVC: 2

5 May 2008

5340-12-324-7422
Mounting Bracket

123247422
NO23220: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-12-378-4290
Doorstop

123784290
65000340: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-126-3506
Leather Strap

121263506
NO PRIMARY REF 12-126-3506: RNCC: 3 | RNVC: 2
DIN6408-A25X500-ANGEBRAEUNT,GENA: RNCC: 5 | RNVC: 9
DIN6408-A25X500-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9
DIN6408-A25X500-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9
A25X500DIN6408ANGEBRAEUNTGENAEHT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-6981
Dust And Moisture Seal Protective Cap

123126981
7525: RNCC: 3 | RNVC: 2
BW206724: RNCC: 5 | RNVC: 1
174-870-0071: RNCC: 5 | RNVC: 2
TEMA7525: RNCC: 5 | RNVC: 2
UB206724: RNCC: 5 | RNVC: 2
2522 4511-115: RNCC: 5 | RNVC: 2

28 Jan 1988

5340-12-330-2129
Helical Compression Spring Seat

123302129
536077-0677.000: RNCC: 2 | RNVC: 2
536077-0677.000: RNCC: 3 | RNVC: 2
536077-0677.000: RNCC: 5 | RNVC: 9

14 Nov 1992

5340-12-186-6457
Retaining Strap

121866457
LN29836A12: RNCC: 2 | RNVC: 2

23 Jan 1981

5340-12-384-7122
Manual Control Handle

123847122
4624364: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-12-044-5673

5340-12-172-8903
Nonmetallic Solid Wheel

121728903
4253010011: RNCC: 3 | RNVC: 2

2 Mar 1978

5340-12-702-2055
Mounting Plate

127022055
VG95211-ML-127022055: RNCC: 2 | RNVC: 2
30.7211.370: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-342-5329
Lock-Release Lever

123425329
2300421-181975.000: RNCC: 2 | RNVC: 2
9908349: RNCC: 3 | RNVC: 2
2300421-181975.000: RNCC: 5 | RNVC: 2
2300421-181975.000: RNCC: 5 | RNVC: 9
9908349: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-383-3321
Access Cover

123833321
51061120018: RNCC: 3 | RNVC: 2
51.06112-0018: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-12-358-6244
Spring Tension Clip

123586244
63449030: RNCC: 3 | RNVC: 2
094.91: RNCC: 5 | RNVC: 2

30 Oct 2002

5340-12-348-7900
Access Cover

123487900
NN31220P01: RNCC: 3 | RNVC: 2

19 Aug 1999

5340-12-359-7107
Mounting Plate

123597107
9473250426: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-042-5545

5340-12-363-2914
Friction Catch

123632914
599.076.996.004: RNCC: 3 | RNVC: 2
81971120027: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-182-7802
Quick Release Plunger

121827802
1204 207 087: RNCC: 3 | RNVC: 2
0003216356: RNCC: 5 | RNVC: 2
1204207087: RNCC: 5 | RNVC: 9
0003216356: RNCC: 5 | RNVC: 9
3216356: RNCC: 5 | RNVC: 9

25 Feb 1980

5340-12-188-9690
Electrical-Mechanical Equipment Post

121889690
9427986: RNCC: 3 | RNVC: 2
046710015000: RNCC: 5 | RNVC: 2
F300 0T 001 2847: RNCC: 6 | RNVC: 9

12 Aug 1981

5340-12-392-7205
Angle Bracket

123927205
L214M1046210: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-12-303-1844
Loop Clamp

123031844
2300106-240300.05: RNCC: 2 | RNVC: 2
2300106-240300.05: RNCC: 3 | RNVC: 2
2300106-240300.05: RNCC: 5 | RNVC: 9
2300106-240300.05: RNCC: 5 | RNVC: 9

4 Mar 1985

5340-12-155-9775
Snap Hook

121559775
188-1 1/8IN VERNICKELT: RNCC: 3 | RNVC: 9
188A115: RNCC: 5 | RNVC: 9
188A1 1-8IN: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-7820
Electrical-Mechanical Equipment Post

121787820
10450-03: RNCC: 3 | RNVC: 2
477112-003: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-363-9088
Section Block Clamp

123639088
J29120260-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-310-7605
Angle Bracket

123107605
4900278-103700.01: RNCC: 2 | RNVC: 2
4900278-103700.01: RNCC: 3 | RNVC: 2

29 Jun 1987

5340-12-123-8973
Retaining Strap

121238973
111905471: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-011-6092

5340-12-376-2647
Loop Clamp

123762647
60550: RNCC: 3 | RNVC: 2

3 Sep 2008

5340-12-365-6047
Mounting Bracket

123656047
9436891814: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-314-8427
Mounting Bracket

123148427
81808007: RNCC: 3 | RNVC: 2
8180800700: RNCC: 5 | RNVC: 2

17 Aug 1988

5340-12-394-3423
Mounting Bracket

123943423
11.28043-0287: RNCC: 3 | RNVC: 2
11.28043-0287: RNCC: 5 | RNVC: 2

22 Nov 2013

5340-12-028-0602

5340-12-192-7204
Dust And Moisture Seal Protective Cap

121927204
025-0479-000: RNCC: 3 | RNVC: 2
C334-Z21-C666: RNCC: 5 | RNVC: 2

17 May 1982

5340-12-178-1532
Access Cover

121781532
2343901: RNCC: 3 | RNVC: 2
5340-12-310-3335: RNCC: 6 | RNVC: 9

22 Mar 1979

5340-12-356-5097
Nonmetallic Bumper

123565097
1282 INDEX4: RNCC: 3 | RNVC: 2
983556-31851: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-311-5756
Electrical-Mechanical Equipment Post

123115756
6600133-231000.004: RNCC: 2 | RNVC: 2
VG95148B6XM3X22-NRST: RNCC: 2 | RNVC: 2
006 229 910-948: RNCC: 3 | RNVC: 2
VG95148B6XM3X22-NRST: RNCC: 3 | RNVC: 2
6600133-231000.004: RNCC: 5 | RNVC: 2

21 Sep 1987

5340-12-302-0387
Butt Hinge Leaf

123020387
3818990051: RNCC: 3 | RNVC: 2

28 Nov 1984

5340-12-355-1140
Spring Holder

123551140
140606: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-196-7153
Angle Bracket

121967153
5802017-170000.00: RNCC: 2 | RNVC: 2
2-02-006: RNCC: 3 | RNVC: 2
5802017-170000.00: RNCC: 3 | RNVC: 2
5802017-170000.00: RNCC: 5 | RNVC: 2
5802017-170000.00: RNCC: 5 | RNVC: 9

8 Aug 1983

5340-12-384-6823
Access Cover

123846823
866411001: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-12-315-7935
Expansion Plug

123157935
51916060067: RNCC: 3 | RNVC: 2
51.91606-0067: RNCC: 5 | RNVC: 2
51916060045: RNCC: 5 | RNVC: 2
51.91606-0045: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-305-0506
Angle Bracket

123050506
5801759-141000.004: RNCC: 2 | RNVC: 2
5801759-141000.004: RNCC: 3 | RNVC: 2
5801759-141000.004: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-156-5504
Butt Hinge Leaf

121565504
42161-28110.02: RNCC: 3 | RNVC: 2
49418142: RNCC: 5 | RNVC: 2
42161-28110-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-8171
Mounting Plate

123638171
GSERD2010.07.05.06: RNCC: 3 | RNVC: 2
GSERD-DP-2010.07.05.06: RNCC: 5 | RNVC: 2

28 Jul 2004

5340-12-356-9659
Angle Bracket

123569659
ED41-1310-00006-110: RNCC: 3 | RNVC: 2

19 Apr 2002

5340-12-317-3207
Access Cover

123173207
4900064-412111.002: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-369-2164
Dust And Moisture Seal Protective Cap-Plug

123692164
D0066003-002: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-12-175-0986
Nonmetallic Bumper

121750986
4259870340: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-326-5670
Butt Hinge Leaf

123265670
1512-9330.00: RNCC: 3 | RNVC: 2
1512-9330.00: RNCC: 5 | RNVC: 2

8 Oct 1991

5340-12-317-6950
Dust And Moisture Seal Protective Cap

123176950
54.3025.486.00: RNCC: 2 | RNVC: 2
54.3025.486.00: RNCC: 3 | RNVC: 2

2 May 1989

5340-12-388-6343
Helical Compression Spring Seat

123886343
5030611118: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-352-6343
Mounting Bracket

123526343
1219 0922: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-340-2058
Access Cover

123402058
23961: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-12-372-0025
Lock-Release Lever

123720025
2608386: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-357-5484
Mounting Bracket

123575484
908491901: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-304-5413
Nonmetallic Bumper

123045413
4062910086: RNCC: 3 | RNVC: 2

29 Jul 1985

5340-12-324-3990
Door Holder

123243990
4427200242: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-12-323-0115
Loop Clamp

123230115
6744920040: RNCC: 3 | RNVC: 2
674 492 00 40: RNCC: 5 | RNVC: 2

16 Oct 1990

5340-12-316-9863
Spring Loaded Cylinder Fastener

123169863
4200061-17141: RNCC: 2 | RNVC: 2
BK7023: RNCC: 3 | RNVC: 2
4200061-17141: RNCC: 3 | RNVC: 2
BK7023: RNCC: 5 | RNVC: 9

1 Mar 1989

5340-12-382-6700
Retaining Band

123826700
SPB-MRA-M380: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-12-703-1982
Dust And Moisture Seal Protective Cap

127031982
VG95211-ML-127031982: RNCC: 2 | RNVC: 2
3AB-9212-116: RNCC: 3 | RNVC: 2
0501013707290: RNCC: 5 | RNVC: 2

21 Oct 1998

5340-12-198-1436
Angle Bracket

121981436
5801999-351000.00: RNCC: 2 | RNVC: 2
5801999-351000.00: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-156-2945
Plain Solid Disk

121562945
8373018-00: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-155-1655
Rod End Clevis

121551655
160-22794-02: RNCC: 3 | RNVC: 2
160-22794-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-193-3377
Pad Eye

121933377
5801417-0120.003: RNCC: 3 | RNVC: 2
5801417-0120-003: RNCC: 5 | RNVC: 2

13 Jul 1982

5340-12-703-3506
Mounting Bracket

127033506
VG95211-ML-127033506: RNCC: 2 | RNVC: 2
SD-76-202-10: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-300-2815
Retaining Clip

123002815
3149110078: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-337-7699
Loop Clamp

123377699
4609955610: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-366-0757
Dust And Moisture Seal Protective Cap-Plug

123660757
610U7RAL3000: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-186-0394
Retaining Strap

121860394
1246-13.2: RNCC: 2 | RNVC: 2
1246-13.2: RNCC: 3 | RNVC: 2
1246-13-2: RNCC: 5 | RNVC: 2

25 Nov 1980

5340-12-310-2812
Mending Plate

123102812
S35444-01-6-157: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-701-7396
Loop Clamp

127017396
VG95211-ML-127017396: RNCC: 2 | RNVC: 2
5.12.7611.0033.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-4819
Dust And Moisture Seal Protective Cap

127004819
22600-000100-00: RNCC: 3 | RNVC: 2
22600-000100-00: RNCC: 5 | RNVC: 9

15 Sep 1992

5340-12-393-7647
Mounting Bracket

123937647
11.31097-0006: RNCC: 3 | RNVC: 2
11.31097-0006: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-356-3685
Angle Bracket

123563685
136-0003.14: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-369-2869
Mending Plate

123692869
839-03-05-000-02: RNCC: 3 | RNVC: 2
839-03-05-000-02: RNCC: 5 | RNVC: 2

14 Jun 2006

5340-12-378-1127
Clamping Catch

123781127
V951L03-1X5BT: RNCC: 3 | RNVC: 2

13 Mar 2009

Load More Results