What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 82 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 82 of 178

5340-12-365-1654
Mounting Bracket

123651654
1837-199810.000.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-349-6613
Butt Hinge

123496613
71 60 7 651 217: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-321-4027
Mounting Bracket

123214027
2782-363020.000.0: RNCC: 2 | RNVC: 2
2782-363020.000.0: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-323-1419
Spring Holder

123231419
432313: RNCC: 2 | RNVC: 2
432313: RNCC: 3 | RNVC: 2
432313: RNCC: 5 | RNVC: 2
432313: RNCC: 5 | RNVC: 9

26 Oct 1990

5340-12-092-2650

5340-12-044-5789

5340-12-040-1012

5340-12-322-2691
Mounting Bracket

123222691
1246851: RNCC: 3 | RNVC: 2
1246851: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-347-3505
Mounting Bracket

123473505
4965.05.06: RNCC: 2 | RNVC: 2
4965.05.06: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-374-2661
Access Cover

123742661
L521M3032102: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-12-183-1177
Pipe Hanger Extension Bar

121831177
0288 8718: RNCC: 3 | RNVC: 2
2888718: RNCC: 5 | RNVC: 2
2888718EE0693-79: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-342-4982
Resilient Mount

123424982
701419081A: RNCC: 3 | RNVC: 9

19 Feb 1997

5340-12-385-0426
Mounting Bracket

123850426
3084 301 015: RNCC: 3 | RNVC: 2

21 Apr 2011

5340-12-361-4926
Mounting Bracket

123614926
1504181: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-175-7598
Resilient Mount

121757598
331923566: RNCC: 3 | RNVC: 2
331923566: RNCC: 3 | RNVC: 2
331923566: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-12-309-1019
Nonmetallic Solid Wheel

123091019
501243: RNCC: 3 | RNVC: 2

15 Dec 1986

5340-12-316-4170
Nonmetallic Bumper

123164170
5187656: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-321-5778
Manual Control Lever

123215778
10 0012 620: RNCC: 3 | RNVC: 2
100012620: RNCC: 5 | RNVC: 2

5 Jun 1990

5340-12-307-2462
Electrical-Mechanical Equipment Post

123072462
RP988656: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-300-3131
Nonmetallic Bumper

123003131
3097520077: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-360-2751
Angle Bracket

123602751
000611-208000.00: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-316-2990
Helical Compression Spring Seat

123162990
6270829: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-331-8005
Angle Bracket

123318005
2421332037: RNCC: 3 | RNVC: 2
93159979: RNCC: 5 | RNVC: 2
2421332037: RNCC: 5 | RNVC: 2

22 Jun 1993

5340-12-157-9281
Spring Tension Clip

121579281
123181: RNCC: 3 | RNVC: 2
123181: RNCC: 5 | RNVC: 2
123181: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-388-2171
Mounting Bracket

123882171
5840986139: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-381-4418
Mounting Bracket

123814418
6628801714: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-354-1197
Access Cover

123541197
00995400: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-374-2893
Loop Clamp

123742893
5561857: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-381-8076
Mounting Bracket

123818076
905 908 018: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-12-094-6318

5340-12-384-6022
Plug Button

123846022
518582: RNCC: 3 | RNVC: 2
518582001: RNCC: 5 | RNVC: 2

11 Mar 2011

5340-12-387-7010
Section Block Clamp

123877010
700325035200: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-363-5797
Angle Bracket

123635797
0418 0999: RNCC: 3 | RNVC: 2
571296177: RNCC: 5 | RNVC: 2

6 Jul 2004

5340-12-372-4859
Door Handle Unit

123724859
10060041: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-309-4640
Mending Plate

123094640
501783: RNCC: 3 | RNVC: 2
501783: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-12-311-6733
Catch Strike

123116733
6030086: RNCC: 3 | RNVC: 2
704225277: RNCC: 5 | RNVC: 2
U401800837: RNCC: 5 | RNVC: 2

5 Oct 1987

5340-12-380-1744
Mounting Bracket

123801744
4374211194: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-12-357-3593
Plug Button

123573593
024.02.708: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-12-179-0200
Access Cover

121790200
01TC30517: RNCC: 3 | RNVC: 2

30 May 1979

5340-12-342-1567
Angle Bracket

123421567
536A08005: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-313-7930
Turnbuckle

123137930
BSAH003: RNCC: 3 | RNVC: 2
ZBTSPE005.001: RNCC: 5 | RNVC: 2

5 May 1988

5340-12-314-5436
Mending Plate

123145436
4354263440: RNCC: 3 | RNVC: 2
435 426 34 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-311-1414
Strap Fastener Loop

123111414
AGS30679: RNCC: 3 | RNVC: 2

30 Jul 1987

5340-12-371-9715
Multiple Angle Bracket

123719715
S282M4015102: RNCC: 2 | RNVC: 2
S282M4015102: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-352-7146
Access Cover

123527146
64416374: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-311-8567
Mending Plate

123118567
07.679.76.025: RNCC: 3 | RNVC: 2
0002030393: RNCC: 5 | RNVC: 2
0002030393: RNCC: 5 | RNVC: 2
0002030393: RNCC: 5 | RNVC: 2

26 Oct 1987

5340-12-025-1148

5340-12-027-8135

5340-12-093-6753

5340-12-315-2530
Catch Strike

123152530
3817520411: RNCC: 3 | RNVC: 2
381 752 04 11: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-323-2765
Access Cover

123232765
42316973: RNCC: 3 | RNVC: 2

9 Nov 1990

5340-12-380-3640
Mounting Bracket

123803640
4256871714: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-12-326-0413
Butt Hinge

123260413
6737200337: RNCC: 3 | RNVC: 2

1 Aug 1991

5340-12-386-2136
Ball Socket Seat

123862136
113400600: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-179-7604
Angle Bracket

121797604
81429064004: RNCC: 3 | RNVC: 2
81.42906.4004: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-183-9897
Retaining Strap

121839897
03441712: RNCC: 3 | RNVC: 2
3441712EE5535-40: RNCC: 5 | RNVC: 2

10 Jun 1980

5340-12-183-9055
Loop Clamp

121839055
2250136: RNCC: 3 | RNVC: 9

29 May 1980

5340-12-307-4013
Handle Grip

123074013
11211953400: RNCC: 3 | RNVC: 2

12 Jun 1986

5340-12-302-2597
Pipe Bracket

123022597
6204292440: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-302-2637
Gummi- Riemen

123022637
4608681114: RNCC: 3 | RNVC: 2

13 Dec 1984

5340-12-328-3348
Bow Handle

123283348
C2174 2Z 09553: RNCC: 2 | RNVC: 2
C2174 2Z 09553: RNCC: 3 | RNVC: 2

7 May 1992

5340-12-165-7464
Resilient Mount

121657464
E1E 11S 63 AC: RNCC: 3 | RNVC: 2
E1E11S63AC: RNCC: 5 | RNVC: 2
VE11HDS63AC: RNCC: 5 | RNVC: 2
35 343-002: RNCC: 5 | RNVC: 2
35343-002: RNCC: 5 | RNVC: 2
VE11HDS63ACE1E11S63AC: RNCC: 5 | RNVC: 9
VG95406-L2-5-Q-H-NMST: RNCC: 5 | RNVC: 9

24 Jun 1976

5340-12-376-8089
Retaining Strap

123768089
700325010103: RNCC: 3 | RNVC: 2
MMN325-2/1 D9-10-S235JRG1: RNCC: 5 | RNVC: 2

10 Nov 2008

5340-12-321-9662
Dust And Moisture Seal Protective Plug

123219662
1463203416: RNCC: 3 | RNVC: 2
1463203416: RNCC: 5 | RNVC: 2
1463203381: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-12-338-8547
Double Angle Bracket

123388547
463-611400.001: RNCC: 3 | RNVC: 9
9895611: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-197-0136
Webbing Strap

121970136
01151-2-SCHLAUFE-FE420MM-LE780MM: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1120-420: RNCC: 3 | RNVC: 2
4900059-323439.000.0: RNCC: 3 | RNVC: 2
4900059-323439-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-25X420X780-C3/SCHLAUF: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-176-4885
Antipilferage Seal

121764885
1423240001: RNCC: 3 | RNVC: 2
1 423 240 001: RNCC: 5 | RNVC: 2
0128 8730: RNCC: 5 | RNVC: 2
1288730EY0147-17: RNCC: 5 | RNVC: 2
81.90711-0305: RNCC: 5 | RNVC: 2
81907110305: RNCC: 5 | RNVC: 2
WPL3S1X: RNCC: 5 | RNVC: 2
0009880770: RNCC: 5 | RNVC: 2
1423240001: RNCC: 5 | RNVC: 2
1288730: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-198-0943
Angle Bracket

121980943
5801411-33012.002: RNCC: 3 | RNVC: 2
5801411-33012.002: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-351-4007
Rim Lock Set

123514007
5801698-1340.00: RNCC: 2 | RNVC: 2
5801698-1340.00: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-12-360-7665
Clamping Catch

123607665
D0066013-001: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-336-0258
Access Cover

123360258
9873720: RNCC: 3 | RNVC: 9
457-151167.000: RNCC: 5 | RNVC: 9

13 Oct 1994

5340-12-309-0198
Electrical-Mechanical Equipment Post

123090198
VG95148C7XM4X11-CUZN39PB2F44: RNCC: 2 | RNVC: 2
VG95148C7XM4X11-CUZN39PB2F44: RNCC: 3 | RNVC: 2
5.127-010.0: RNCC: 3 | RNVC: 2
5.127-010: RNCC: 5 | RNVC: 9

8 Dec 1986

5340-12-309-2807
Loop Clamp

123092807
NO PRIMARY REF 12-309-2807: RNCC: 3 | RNVC: 2
LM-5022: RNCC: 5 | RNVC: 9

9 Jan 1987

5340-12-331-5110
Mending Plate

123315110
U100-3220-001: RNCC: 2 | RNVC: 2
U100-3220-001: RNCC: 3 | RNVC: 2
U100-3220-001: RNCC: 5 | RNVC: 2

12 May 1993

5340-12-358-6982
Mounting Plate

123586982
2481-390140.000.0: RNCC: 2 | RNVC: 2
2481-390140.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-176-1920
Clamping Catch

121761920
C3753146L: RNCC: 3 | RNVC: 2
C 3753 146 L: RNCC: 5 | RNVC: 2
26200: RNCC: 5 | RNVC: 2
C3753146L: RNCC: 5 | RNVC: 2
C 3753 146 L: RNCC: 5 | RNVC: 2

13 Nov 1978

5340-12-330-5207
Electrical-Mechanical Equipment Post

123305207
2 914 830 012: RNCC: 3 | RNVC: 2
2914830012: RNCC: 5 | RNVC: 2

4 Jan 1993

5340-12-345-7660
Angle Bracket

123457660
4200081-151412.001: RNCC: 2 | RNVC: 2
4200081-151412.001: RNCC: 5 | RNVC: 2
9844896: RNCC: 5 | RNVC: 9
4200081-151412.001: RNCC: 5 | RNVC: 9

23 Apr 1998

5340-12-382-1740
Mounting Bracket

123821740
135M55009E1: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-159-0472
Spring Tension Clip

121590472
2191331050: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-384-1406
Multiple Angle Bracket

123841406
82612430038: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-12-126-3444

5340-12-392-0084
Runner

123920084
109048-20402: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-322-2348
Mending Plate

123222348
54.3050.000.09: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-302-5108
Spring Tension Clip

123025108
50.043: RNCC: 3 | RNVC: 2

9 Jan 1985

5340-12-040-1014

5340-12-188-9691
Butt Hinge Leaf

121889691
9434840: RNCC: 3 | RNVC: 2
046871006100: RNCC: 5 | RNVC: 2
F300 0T 001 2855: RNCC: 6 | RNVC: 9

12 Aug 1981

5340-12-373-5954
Mounting Bracket

123735954
JSE0040201: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-12-355-8165
Loop Clamp

123558165
EN4113S20WR: RNCC: 2 | RNVC: 2

18 Dec 2001

5340-12-184-1838
Pipe Bracket

121841838
183905471: RNCC: 3 | RNVC: 2

3 Jul 1980

5340-12-382-5599
Shipping And Storage Container Twistlock

123825599
10002438: RNCC: 3 | RNVC: 2

8 Jul 2010

5340-12-386-7490
Mounting Bracket

123867490
T251M4924101: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-010-4747

5340-12-360-2956
Headless Straight Rod

123602956
000611-266100.00: RNCC: 3 | RNVC: 2

6 May 2003

5340-12-355-3513
Dust And Moisture Seal Protective Cap-Plug

123553513
610U2RAL3000: RNCC: 3 | RNVC: 2
610U2 ROT: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-12-386-0606
Mounting Bracket

123860606
862904307: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-12-353-1486
Angle Bracket

123531486
8712001440: RNCC: 3 | RNVC: 2
871 200 14 40: RNCC: 5 | RNVC: 2

2 Feb 2001

5340-12-319-6725
Handle Grip

123196725
620-4: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-365-1587
Retaining Strap

123651587
300.007.894: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-166-1400
Retaining Strap

121661400
160-25853-01: RNCC: 3 | RNVC: 2
160-25853-01: RNCC: 5 | RNVC: 9

31 Jul 1976

5340-12-318-5850
Dust And Moisture Seal Protective Cap

123185850
4358517027: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-306-2631
Dust And Moisture Seal Protective Plug

123062631
11111335090: RNCC: 3 | RNVC: 9

12 Feb 1986

5340-12-337-9335
Angle Bracket

123379335
461 843 06 12: RNCC: 3 | RNVC: 2
4618430612: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-330-1543
Access Cover

123301543
11069701: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-12-361-4930
Bow Handle

123614930
1502407: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-310-8865
Helical Compression Spring Seat

123108865
03613100: RNCC: 3 | RNVC: 2

6 Jul 1987

5340-12-024-9116

5340-12-387-3334
Lock Key

123873334
28520490: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-12-172-8681
Spring Tension Clip

121728681
4067230434: RNCC: 3 | RNVC: 2

27 Feb 1978

5340-12-199-1422
Dust And Moisture Seal Protective Plug

121991422
81906010015: RNCC: 3 | RNVC: 2

29 Mar 1984

5340-12-393-3307
Permanent Magnet

123933307
152036430: RNCC: 3 | RNVC: 2
152036430: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-12-306-8992
Dust And Moisture Seal Protective Cap

123068992
IS 08: RNCC: 3 | RNVC: 2
IS08: RNCC: 5 | RNVC: 2

16 Apr 1986

5340-12-174-8016
Rod End Clevis

121748016
A11A271430712: RNCC: 3 | RNVC: 2

3 Aug 1978

5340-12-302-3034
Pad Eye

123023034
3953230140: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-12-328-8943
Webbing Strap

123288943
01026-1-SCHLAUFE -800MM: RNCC: 3 | RNVC: 2
221-00-470-3: RNCC: 3 | RNVC: 2
79017/SCHLAUFE-0800: RNCC: 3 | RNVC: 2
79018/SCHLAUFE-0800: RNCC: 3 | RNVC: 2
DIN60060-1-50X800-C5/SCHLAUFE: RNCC: 5 | RNVC: 9
221-00-470-3: RNCC: 5 | RNVC: 9

30 Jun 1992

5340-12-383-3532
Loop Clamp

123833532
DIN3016-1-D1-6X12-W1-2-EPDM: RNCC: 2 | RNVC: 2
06673000616: RNCC: 3 | RNVC: 2
06.67300-0616: RNCC: 5 | RNVC: 2

8 Oct 2010

5340-12-312-8931
Loop Clamp

123128931
DIN3016-2-G1-14X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-14X9-W1-2: RNCC: 3 | RNVC: 2
SP14/9ZY: RNCC: 3 | RNVC: 2
01210000014: RNCC: 5 | RNVC: 2
1210000014: RNCC: 5 | RNVC: 2
DIN3016-G1-14X9-W1-2: RNCC: 5 | RNVC: 9
VG95931-G14X9-W1: RNCC: 5 | RNVC: 9

17 Feb 1988

5340-12-322-5087
Mounting Bracket

123225087
2079-111000.09B: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-180-4678
Nonmetallic Bumper

121804678
6017660297: RNCC: 3 | RNVC: 2
2315237: RNCC: 3 | RNVC: 2
9110-29: RNCC: 5 | RNVC: 2
9223382180: RNCC: 5 | RNVC: 2
3817660297: RNCC: 5 | RNVC: 2
7211660951: RNCC: 5 | RNVC: 2
3817660297: RNCC: 5 | RNVC: 2

12 Sep 1979

5340-12-164-4018
Dust And Moisture Seal Protective Plug

121644018
81960020075: RNCC: 3 | RNVC: 2
81.96002-0075: RNCC: 5 | RNVC: 2
3464210011: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-8277
Nonmetallic Bumper

121778277
2300002-204010.004: RNCC: 2 | RNVC: 2
2300002-204010.004: RNCC: 3 | RNVC: 2
2300002-204010.004: RNCC: 3 | RNVC: 2
2300002-204010.004: RNCC: 3 | RNVC: 2
2300002-204010-004: RNCC: 5 | RNVC: 9
2300002-204010.004: RNCC: 5 | RNVC: 9

28 Feb 1979

5340-12-199-8289
Dust And Moisture Seal Protective Plug

121998289
536116-8012: RNCC: 2 | RNVC: 2
536116-8012: RNCC: 3 | RNVC: 2
536116-8012: RNCC: 5 | RNVC: 9
536116-8012.000: RNCC: 5 | RNVC: 9
536116-8012: RNCC: 5 | RNVC: 9
536116-8012.000: RNCC: 5 | RNVC: 9

2 Jun 1984

5340-12-026-6539

5340-12-392-3576
Spring Tension Clip

123923576
4000004: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-091-0483

5340-12-346-1637
Mounting Bracket

123461637
40205: RNCC: 3 | RNVC: 2
040205: RNCC: 5 | RNVC: 2

22 Jun 1998

5340-12-093-7871

5340-12-372-0391
Mounting Bracket

123720391
S281M3018102: RNCC: 2 | RNVC: 2
S281M3018102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-320-2744
Nonmetallic Bumper

123202744
1221401: RNCC: 3 | RNVC: 2

22 Dec 1989

5340-12-179-5095
Angle Bracket

121795095
4065421140: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-325-3206
Mounting Plate

123253206
3661320740: RNCC: 3 | RNVC: 2

24 May 1991

5340-12-168-5014
Window Regulator Handle

121685014
WN1137: RNCC: 3 | RNVC: 2
101256802: RNCC: 5 | RNVC: 2

15 Mar 1977

5340-12-357-3886
Section Block Clamp

123573886
T290M0004205: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-12-197-0763
Friction Catch

121970763
4408875006: RNCC: 3 | RNVC: 9

15 Sep 1983

5340-12-357-3591
Bow Handle

123573591
114.22.209: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-12-146-2894
Webbing Strap

121462894
4047901796: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-148-7964
Spring Tension Clip

121487964
SC05030: RNCC: 3 | RNVC: 2
2201029101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-136-1425

5340-12-190-9562
Dust And Moisture Seal Protective Plug

121909562
V6/141: RNCC: 3 | RNVC: 2

29 Dec 1981

5340-12-393-5179
Mending Plate

123935179
11.29251-0025: RNCC: 3 | RNVC: 2
11.29251-0025: RNCC: 5 | RNVC: 2

20 Sep 2013

5340-12-319-3826
Bridge Clamp

123193826
C334-A3-C4: RNCC: 2 | RNVC: 2
C334-A3-C4: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-188-7769
Catch Strike

121887769
5801479-3020.03: RNCC: 2 | RNVC: 2
5801479-3020.03: RNCC: 3 | RNVC: 2
5801479-3020-03: RNCC: 5 | RNVC: 2
5801479-3020-03: RNCC: 5 | RNVC: 9
5801479-3020.03: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-150-7311
Webbing Strap

121507311
59068-200.000: RNCC: 2 | RNVC: 2
59068-200.000: RNCC: 3 | RNVC: 2
59068-200-000: RNCC: 5 | RNVC: 9
59068-200.000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-1783
Mending Plate

123031783
531139-1111: RNCC: 3 | RNVC: 2
1264-1311-215: RNCC: 5 | RNVC: 2
1264-1311-215: RNCC: 5 | RNVC: 9
531139-1111: RNCC: 5 | RNVC: 9
531139-1111.000: RNCC: 5 | RNVC: 9

1 Mar 1985

5340-12-702-1684
Mounting Plate

127021684
VG95211-ML-127021684: RNCC: 2 | RNVC: 2
30.7101.110: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-335-0400
Retaining Strap

123350400
289G-00-T5A: RNCC: 3 | RNVC: 2

14 Jul 1994

5340-12-180-8842
Hasp Staple

121808842
320.131121: RNCC: 3 | RNVC: 2
13-1121: RNCC: 5 | RNVC: 9
936: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-315-1413
Angle Bracket

123151413
C50-02-001: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-12-391-4825
Dust And Moisture Seal Protective Plug

123914825
310-036: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-308-8345
Mending Plate

123088345
1281-52400.09: RNCC: 2 | RNVC: 2
160425: RNCC: 3 | RNVC: 2
1281-52400.09: RNCC: 5 | RNVC: 2

21 Nov 1986

5340-12-151-2257
Ball Socket Seat

121512257
1344-01-03-01-61: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-314-2031
Rod End Clevis

123142031
272.317 745: RNCC: 2 | RNVC: 2
272.317.745: RNCC: 3 | RNVC: 2
272.317 745: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-195-3514
Strap Hinge

121953514
3227200337: RNCC: 3 | RNVC: 2

9 Feb 1983

5340-12-345-4380
Mounting Bracket

123454380
54.0053.183.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-199-3295
Retaining Strap

121993295
3149950348: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-170-3832
Nut And Bolt Locking Plate

121703832
E20432: RNCC: 3 | RNVC: 2

8 Jul 1977

5340-12-373-7250
Angle Bracket

123737250
8831530240: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-12-173-3548
Rod End Clevis

121733548
01TL30157: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-12-381-6556
Angle Bracket

123816556
41214669: RNCC: 3 | RNVC: 2

12 Mar 2010

5340-12-355-4596
Angle Bracket

123554596
0008271812: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-12-182-9766
Loop Clamp

121829766
LN9490BM4: RNCC: 2 | RNVC: 2

11 Mar 1980

5340-12-182-4131
Double Angle Bracket

121824131
6360780285: RNCC: 3 | RNVC: 2

30 Jan 1980

5340-12-329-3220
Mounting Bracket

123293220
2896 716 M1: RNCC: 3 | RNVC: 2
374 948 118: RNCC: 5 | RNVC: 2

5 Aug 1992

5340-12-361-0865
Retaining Clip

123610865
F00RJ00322: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-355-4019
Mounting Bracket

123554019
4615454240: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-316-9646
Mounting Bracket

123169646
3121420012: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-363-8476
Mounting Bracket

123638476
J28230102-001: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-337-6769
Nonmetallic Bumper

123376769
347-120-003: RNCC: 2 | RNVC: 2
347-120-003: RNCC: 3 | RNVC: 2

27 Mar 1995

5340-12-194-9928
Mending Plate

121949928
2500067-102000.02: RNCC: 2 | RNVC: 2
2500067-102000.02: RNCC: 3 | RNVC: 2
2500067-102000-02: RNCC: 5 | RNVC: 9

28 Dec 1982

5340-12-385-5538
Mounting Bracket

123855538
5241422540: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-327-2503
Mounting Bracket

123272503
4615201941: RNCC: 3 | RNVC: 2

20 Dec 1991

5340-12-349-6593
Multiple Eye Pad

123496593
2940.1302: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-351-5409
Mounting Plate

123515409
7802781801: RNCC: 2 | RNVC: 2
7802781801: RNCC: 5 | RNVC: 2
78027 81801: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-12-350-7643
Shimmy Damper

123507643
49.1552.0139: RNCC: 3 | RNVC: 2

17 May 2000

5340-12-092-3052

5340-12-361-0850
Mounting Plate

123610850
64415057: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-349-8924
Retaining Strap

123498924
T212M2003101: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-322-6132
Access Door

123226132
10 0021 033: RNCC: 2 | RNVC: 2
10 0021 033: RNCC: 3 | RNVC: 2

6 Sep 1990

5340-12-387-8661
Angle Bracket

123878661
7092961: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-355-0384
Angle Bracket

123550384
5400049-669113.00: RNCC: 2 | RNVC: 2
5400049-669113.00: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-148-2751
Resilient Mount

121482751
DIN95363-C15X15-NR40ST: RNCC: 2 | RNVC: 2
1.015.015C-40SH: RNCC: 5 | RNVC: 2
C20234-A12-B156: RNCC: 5 | RNVC: 2
C20234A12B156: RNCC: 5 | RNVC: 2
1.015.015C-40SHORE A: RNCC: 5 | RNVC: 2
520007-M4.NR40.ST: RNCC: 5 | RNVC: 2
VG95363-C15X15-NR40ST: RNCC: 5 | RNVC: 9
TLOCH12TZ156: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-7776
Resilient Mount Plate

123017776
C42080-A3-B19: RNCC: 2 | RNVC: 2
C42080-A3-B19: RNCC: 3 | RNVC: 2

8 Nov 1984

5340-12-339-0615
Dust And Moisture Seal Protective Cap

123390615
SIZ890-9F621-02: RNCC: 3 | RNVC: 2
SIZ 890-F9621-02: RNCC: 5 | RNVC: 2

5 Oct 1995

5340-12-701-2736
Retaining Bail

127012736
VG95211-ML-127012736: RNCC: 2 | RNVC: 2
5.12.4806.1584.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-158-6958
Compression Cup

121586958
H180-1-88NBR/101: RNCC: 3 | RNVC: 2
H180-1-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-171-5179
Loop Clamp

121715179
DIN3016-1-B1-30X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-30X20-W1-2: RNCC: 3 | RNVC: 2
RS0.30/20: RNCC: 3 | RNVC: 2
4100020030: RNCC: 5 | RNVC: 2
RS30-20: RNCC: 5 | RNVC: 2
RS30/20: RNCC: 5 | RNVC: 2
DIN3016-B1-30X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-B30X20-W1: RNCC: 5 | RNVC: 9
VG95931B30X20W1: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-367-2614
Hand Crank

123672614
4.481-157.0: RNCC: 3 | RNVC: 2

26 Jul 2005

5340-12-183-5606
Halter

121835606
10540-02: RNCC: 3 | RNVC: 2
484074: RNCC: 5 | RNVC: 2
10540-01: RNCC: 5 | RNVC: 2

29 Apr 1980

5340-12-390-4705
Padlock

123904705
180IB/50HB63: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-387-9135
Bumper

123879135
7091044: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-330-4403
Mounting Bracket

123304403
9000 3009: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-12-153-1876
Loop Clamp

121531876
P204271900405606: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-387-9380
Loop Clamp

123879380
028131548A: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-092-0911

5340-12-330-0411
Lock-Release Lever

123300411
11256401900: RNCC: 3 | RNVC: 2

24 Oct 1992

5340-12-328-9280
Runner

123289280
CF 344 311 AR: RNCC: 2 | RNVC: 2
CF 344 311 AR: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-378-2452
Mounting Bracket

123782452
41225777: RNCC: 3 | RNVC: 2

23 Mar 2009

5340-12-126-0309

5340-12-191-7363
Resilient Mount

121917363
3875040112: RNCC: 3 | RNVC: 2

1 Mar 1982

5340-12-041-0472

5340-12-313-3511
Cane Bolt

123133511
1070436: RNCC: 2 | RNVC: 2
1070436: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-12-314-4311
Mounting Bracket

123144311
6245400173: RNCC: 3 | RNVC: 2
624 540 01 73: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-388-6347
Mounting Bracket

123886347
5842001040: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-010-8500

5340-12-364-6593
Angle Bracket

123646593
54.0084.157.01: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-360-2108
Spring Tension Clip

123602108
06438090041: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-328-5457
Mending Plate

123285457
52.3108.015.11: RNCC: 2 | RNVC: 2
52.3108.015.11: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-353-6450
Retaining Bail

123536450
320 0008: RNCC: 3 | RNVC: 2
0766223: RNCC: 5 | RNVC: 2

23 Apr 2001

5340-12-042-1616

5340-12-314-4913
Shimmy Damper

123144913
082961: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-12-040-1048

5340-12-323-4962
Expansion Plug

123234962
51916060049: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-12-146-0501
Retaining Strap

121460501
6188821: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-363-6765
Catch Strike

123636765
4607431003: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-315-3398
Access Cover

123153398
23182-8031.02: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-325-6976
Metal Grille

123256976
64455002: RNCC: 3 | RNVC: 2
4455/002: RNCC: 5 | RNVC: 9

1 Jul 1991

5340-12-311-1005
Spring Tension Clip

123111005
5800024-4100.003: RNCC: 2 | RNVC: 2
2425024703: RNCC: 3 | RNVC: 2
378.14010: RNCC: 5 | RNVC: 2
53.0517.008.08: RNCC: 5 | RNVC: 2
5800024-4100.003: RNCC: 5 | RNVC: 9
53.0517.008.08: RNCC: 5 | RNVC: 9
24250 24703: RNCC: 5 | RNVC: 9

27 Jul 1987

5340-12-348-8860
Mounting Bracket

123488860
245/7346-46-14-00: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-12-319-4688
Butt Hinge

123194688
5802006-201210.01: RNCC: 2 | RNVC: 2
5802006-201210.01: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-314-1228
Ball Socket Seat

123141228
N3860: RNCC: 3 | RNVC: 2
000 335 00 74: RNCC: 5 | RNVC: 2
0003350074: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-172-2165
Butt Hinge

121722165
3416LINKS: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-12-305-1997
Plug Button

123051997
A165072: RNCC: 3 | RNVC: 2
A165072: RNCC: 5 | RNVC: 2

7 Oct 1985

5340-12-305-5520
Loop Clamp

123055520
54.0028.380.02: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-372-0462
Mounting Bracket

123720462
S281M3039102: RNCC: 2 | RNVC: 2
S281M3039102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-325-5100
Friction Catch

123255100
6030068: RNCC: 3 | RNVC: 2
603 0068: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-12-372-0154
Butt Hinge

123720154
2608320: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-12-181-2296
Mounting Bracket

121812296
BT2541: RNCC: 3 | RNVC: 2
2000767-24: RNCC: 5 | RNVC: 2
2000767-24: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-370-9864
Retaining Strap

123709864
DF Z00 359 AE: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-12-371-8716
Webbing Strap

123718716
7099834: RNCC: 3 | RNVC: 2

24 May 2007

5340-12-375-5735
Helical Compression Spring Seat

123755735
S259M6056220: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-12-171-4608
Angle Bracket

121714608
42223-520-01: RNCC: 2 | RNVC: 2
42223-520-01: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-300-9120
Spring Loaded Cylinder Fastener

123009120
5400026-1210: RNCC: 2 | RNVC: 2
5400026-1210: RNCC: 3 | RNVC: 2

11 Sep 1984

5340-12-357-2796
Mounting Plate

123572796
46251-002: RNCC: 3 | RNVC: 2

29 May 2002

5340-12-328-3699
Dust And Moisture Seal Protective Cap

123283699
350-103-015: RNCC: 3 | RNVC: 2

12 May 1992

5340-12-195-6958
Angle Bracket

121956958
5800043-1100.07: RNCC: 2 | RNVC: 2
5800043-1100-07: RNCC: 3 | RNVC: 2
5800043-1100.07: RNCC: 5 | RNVC: 2
5800043-1100.07: RNCC: 5 | RNVC: 2
5800043-1100.07: RNCC: 5 | RNVC: 9
5800043-1100-07: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-349-2845
Butt Hinge Leaf

123492845
J52423624-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-010-2880

5340-12-372-9176
Spring Tension Clip

123729176
L258M2073204: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-12-369-0197
Access Cover

123690197
160-13523-03: RNCC: 3 | RNVC: 2

15 May 2006

5340-12-333-0433
Catch Strike

123330433
160-24714-08: RNCC: 3 | RNVC: 2
15160-24714-08: RNCC: 5 | RNVC: 2
160-24714-08: RNCC: 5 | RNVC: 9

21 Oct 1993

5340-12-373-2033
Mending Plate

123732033
2300061-051939.003: RNCC: 2 | RNVC: 2
2300061-051939.003: RNCC: 3 | RNVC: 2
9948587: RNCC: 5 | RNVC: 9

9 Oct 2007

5340-12-326-7831
Webbing Strap

123267831
902982-102: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-390-7708
Lock Key Set

123907708
6.123-213.0: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-12-701-3907
Loop Clamp

127013907
VG95211-ML-127013907: RNCC: 2 | RNVC: 2
5.12.5311.1000.15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-9537
Rod End Clevis

127019537
VG95211-ML-127019537: RNCC: 2 | RNVC: 2
5.12.6401.0051.05: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-700-9019
Loop Clamp

127009019
VG95211-ML-127009019: RNCC: 2 | RNVC: 2
2.11.6100.8050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-155-4801
Rod End Clevis

121554801
160-70046-02: RNCC: 3 | RNVC: 2
160-70046-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-330-3669
Loop Clamp

123303669
DIN3016-1-D1-35X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-35X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.35/12-W1: RNCC: 3 | RNVC: 2
DIN3016-D1-35X12-W1-2: RNCC: 5 | RNVC: 9

8 Dec 1992

5340-12-389-3468
Bail Handle

123893468
GN425.2-120-CR: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-12-701-7394
Loop Clamp

127017394
VG95211-ML-127017394: RNCC: 2 | RNVC: 2
5.12.7611.0031.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7598
Angle Bracket

127017598
VG95211-ML-127017598: RNCC: 2 | RNVC: 2
5.12.7701.1080.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-376-2117
Flush Lock

123762117
10065002: RNCC: 3 | RNVC: 2

26 Aug 2008

5340-12-333-4900
Dust And Moisture Seal Protective Cap

123334900
K25057: RNCC: 3 | RNVC: 2
0009881735: RNCC: 5 | RNVC: 2
000 988 1735: RNCC: 5 | RNVC: 2

22 Dec 1993

5340-12-392-2774
Butt Hinge

123922774
7000140: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-320-3012
Mounting Bracket

123203012
0241 4172: RNCC: 3 | RNVC: 2
02414172KZ0147-20: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-368-8749
Mounting Plate

123688749
4607430711: RNCC: 3 | RNVC: 2

3 May 2006

5340-12-328-6309
Snap Hook

123286309
4220-80: RNCC: 3 | RNVC: 9

11 Jun 1992

5340-12-371-5605
Ball Socket Seat

123715605
701711166: RNCC: 3 | RNVC: 2
701 711 166: RNCC: 5 | RNVC: 2

18 Apr 2007

5340-12-309-6958
Loop Clamp

123096958
F125600276: RNCC: 3 | RNVC: 2
774215377: RNCC: 5 | RNVC: 2

17 Feb 1987

5340-12-361-4748
Webbing Strap

123614748
187513803: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-180-2133
Angle Bracket

121802133
02523254: RNCC: 3 | RNVC: 2
2523254EE5022-71: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-123-2876
Retaining Strap

121232876
K15568: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-356-0051
Elbow Catch

123560051
2105451381: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-360-1418
Dust And Moisture Seal Protective Plug

123601418
600B413: RNCC: 3 | RNVC: 2
GPN600B413: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-368-1957
Retaining Clip

123681957
19534: RNCC: 3 | RNVC: 2

5 Jan 2006

5340-12-374-5199
Retaining Clip

123745199
2411700: RNCC: 3 | RNVC: 2

22 Feb 2008

5340-12-146-6578
Pipe Bracket

121466578
AWENTW2789A14: RNCC: 3 | RNVC: 2
AWENTW2789A14: RNCC: 5 | RNVC: 2
AWENTW2789A14: RNCC: 5 | RNVC: 2
AWENTW2789A14: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-094-0935

5340-12-020-5339

5340-12-410-6082

5340-12-192-8909
Angle Bracket

121928909
4353300574: RNCC: 3 | RNVC: 2

2 Jun 1982

5340-12-320-4766
Mending Plate

123204766
40 0165 472: RNCC: 3 | RNVC: 2
40 0165 472: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-367-4784
Angle Bracket

123674784
9414295540: RNCC: 3 | RNVC: 2

24 Aug 2005

5340-12-392-8017
Protection Bellows

123928017
M49172355204: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-12-357-9028
Dust And Moisture Seal Protective Cover

123579028
2300042-255161.000: RNCC: 2 | RNVC: 2
2300042-255161.000: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-198-1351
Mending Plate

121981351
1121-98251W4.01: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-180-9078
Escutcheon Plate

121809078
81626420025: RNCC: 3 | RNVC: 2

11 Oct 1979

5340-12-181-9630
Rod End Clevis

121819630
01TC30617: RNCC: 3 | RNVC: 2

28 Dec 1979

5340-12-327-8026
Dust And Moisture Seal Boot

123278026
0770 026 051: RNCC: 3 | RNVC: 2
Y045 253 00: RNCC: 5 | RNVC: 2
0770026051: RNCC: 5 | RNVC: 2
0770 026 051: RNCC: 5 | RNVC: 2

6 Mar 1992

5340-12-178-6753
Retaining Strap

121786753
8739951668: RNCC: 3 | RNVC: 2
8739951668: RNCC: 5 | RNVC: 2
8739951668: RNCC: 5 | RNVC: 9

9 May 1979

5340-12-344-0607
Lock Key

123440607
571509408: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-12-379-9110
Section Block Clamp

123799110
58080160: RNCC: 3 | RNVC: 2
CV169111: RNCC: 5 | RNVC: 2
58080160: RNCC: 5 | RNVC: 2

11 Sep 2009

5340-12-339-8529
Access Cover

123398529
4466 351 081: RNCC: 3 | RNVC: 2
4466351081: RNCC: 5 | RNVC: 2

24 Jan 1996

5340-12-196-2849
Angle Bracket

121962849
03713900: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-339-4494
Mounting Plate

123394494
4139 306 179: RNCC: 3 | RNVC: 2
4139306179: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-182-0607
Mounting Plate

121820607
81664400052: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-12-323-7533
Dashpot

123237533
055492: RNCC: 3 | RNVC: 2
055492 01 26 220: RNCC: 5 | RNVC: 2
0111102615220DAEM: RNCC: 5 | RNVC: 2
055492220N: RNCC: 5 | RNVC: 9

13 Dec 1990

5340-12-316-4741

5340-12-129-9479

5340-12-389-5113
Magnetic Base

123895113
8027-00: RNCC: 3 | RNVC: 2

16 Jul 2012

5340-12-333-5804
Mounting Bracket

123335804
G32960-W0183-B131: RNCC: 3 | RNVC: 2

7 Jan 1994

5340-12-311-0606
Mending Plate

123110606
5802284-121120.02: RNCC: 2 | RNVC: 2
4312 712 63200: RNCC: 3 | RNVC: 2
4312 712 6320E: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-12-300-0898
Mending Plate

123000898
272.304 946: RNCC: 2 | RNVC: 2
272.304.946: RNCC: 3 | RNVC: 2
272.1769.21-05: RNCC: 5 | RNVC: 9
272.1769.21-05: RNCC: 5 | RNVC: 9
272.304 946: RNCC: 5 | RNVC: 9

30 Jun 1984

5340-12-374-4836
Manual Control Lever

123744836
353 7651-001: RNCC: 3 | RNVC: 2
353 7651-001: RNCC: 5 | RNVC: 2

21 Feb 2008

5340-12-195-8066
Double Angle Bracket

121958066
160-26694-03: RNCC: 3 | RNVC: 2
160-26694-03: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-334-9324
Hand Crank

123349324
0640000005: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-12-325-0486
Rod End Clevis

123250486
1161001100: RNCC: 3 | RNVC: 2

26 Apr 1991

5340-12-316-2319
Handle Grip

123162319
BK7022: RNCC: 3 | RNVC: 2
100703: RNCC: 5 | RNVC: 2
BK7022: RNCC: 5 | RNVC: 9

3 Jan 1989

5340-12-134-0263
Nonmetallic Bumper

121340263
0260014000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-305-2800
Resilient Mount

123052800
1113301575: RNCC: 3 | RNVC: 2

16 Oct 1985

5340-12-359-6586
Mounting Bracket

123596586
9485200541: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-12-333-8484
Runner

123338484
532104-8448.000: RNCC: 2 | RNVC: 2
532104-8448.000: RNCC: 3 | RNVC: 2
532104-8448.000: RNCC: 5 | RNVC: 9

17 Feb 1994

5340-12-321-8813
Angle Bracket

123218813
4353512940: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-12-352-7545
Angle Bracket

123527545
562 187 22 40: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-12-349-2445
Dust And Moisture Seal Protective Plug

123492445
4419970086: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-12-382-1738
Angle Bracket

123821738
5502033840: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-377-1736
Mounting Bracket

123771736
41297689: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-365-1219
Retaining Strap

123651219
2205040740: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-347-4432
Hand Crank

123474432
142466: RNCC: 3 | RNVC: 9

11 Dec 1998

5340-12-317-3898
Electrical-Mechanical Equipment Post

123173898
7165802: RNCC: 3 | RNVC: 2

4 Apr 1989

5340-12-352-5902
Spacing Threaded Standoff

123525902
863001T: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-136-2991
Retaining Strap

121362991
114M80012E1: RNCC: 3 | RNVC: 2
28399950820E0: RNCC: 5 | RNVC: 2
114M80012: RNCC: 5 | RNVC: 2
8399950820: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-337-7692
Angle Bracket

123377692
4607200023: RNCC: 3 | RNVC: 2
460 720 00 23: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-12-350-4337
Section Block Clamp

123504337
JN0413C18: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-185-9272
Bow Handle

121859272
2421401: RNCC: 3 | RNVC: 2

8 Nov 1980

5340-12-390-8443
Mounting Bracket

123908443
X58317500001: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-12-363-0508
Angle Bracket

123630508
81657400065: RNCC: 3 | RNVC: 2
81.65740.0065: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-378-0211
Angle Bracket

123780211
504097969: RNCC: 3 | RNVC: 2

5 Mar 2009

5340-12-331-3968
Mounting Bracket

123313968
5802017-707810.00: RNCC: 2 | RNVC: 2
5802017-707810.00: RNCC: 3 | RNVC: 2

3 May 1993

5340-12-353-5080
Kunst Gleitschiene

123535080
2995.06.82: RNCC: 2 | RNVC: 2
2995.06.82: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-12-348-0672
Mounting Plate

123480672
58R059-836: RNCC: 2 | RNVC: 2
58R059-836: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-377-9515
Access Cover

123779515
5559778: RNCC: 3 | RNVC: 2

2 Mar 2009

5340-12-381-6372
Dust And Moisture Seal Protective Plug

123816372
504000770: RNCC: 3 | RNVC: 2

11 Mar 2010

5340-12-154-4989

5340-12-135-3830

5340-12-367-9568
Dust And Moisture Seal Protective Cap

123679568
E37198-00: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-378-1688
Mounting Bracket

123781688
5555998: RNCC: 3 | RNVC: 2

17 Mar 2009

5340-12-141-3636

5340-12-306-4850
Helical Compression Spring Seat

123064850
272 343 38 05: RNCC: 3 | RNVC: 2
2723433805: RNCC: 5 | RNVC: 2

4 Mar 1986

5340-12-195-8920
Quick Release Plunger

121958920
7061801: RNCC: 3 | RNVC: 2
GZ70618: RNCC: 5 | RNVC: 2
3511 191 65371: RNCC: 5 | RNVC: 2
70618: RNCC: 5 | RNVC: 2

27 Apr 1983

5340-12-381-7451
Dust And Moisture Seal Protective Cover

123817451
GPN320GL35: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-12-351-3253
Door Handle

123513253
2210A: RNCC: 3 | RNVC: 2
109217: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-12-361-4335
Access Cover

123614335
1508940: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-316-2937
Access Cover

123162937
1167043: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-375-0670
Pad Eye

123750670
4538033-801: RNCC: 3 | RNVC: 2
4538033-801: RNCC: 5 | RNVC: 2

18 Apr 2008

5340-12-340-2610
Access Cover

123402610
176A47504: RNCC: 3 | RNVC: 2
176A47504 D1: RNCC: 5 | RNVC: 2

20 Mar 1996

5340-12-340-5461
Double Angle Bracket

123405461
5900961140: RNCC: 3 | RNVC: 2
5900961140: RNCC: 5 | RNVC: 2
5900961140: RNCC: 5 | RNVC: 2
590 096 11 40: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-172-0942
Butt Hinge

121720942
145-50X50MM: RNCC: 3 | RNVC: 2

19 Dec 1977

5340-12-340-4982
Antipilferage Seal Locking Wire

123404982
T13028: RNCC: 3 | RNVC: 2
T13028: RNCC: 5 | RNVC: 9

24 Apr 1996

5340-12-335-9891
Door Handle

123359891
2016.1104: RNCC: 3 | RNVC: 2
2016 1104: RNCC: 5 | RNVC: 2

10 Oct 1994

5340-12-321-2579
Webbing Strap

123212579
81968024023: RNCC: 3 | RNVC: 2
81.96802.4023: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-12-358-9600
Dust And Moisture Seal Protective Cap

123589600
6418680339: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-322-3336
Retaining Strap

123223336
4229950122: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-314-2465
Expansion Plug

123142465
4039970820: RNCC: 3 | RNVC: 2
403 997 08 20: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-313-0356
Access Cover

123130356
2300248-90000.20: RNCC: 2 | RNVC: 2
2300248-90000.20: RNCC: 3 | RNVC: 2
2300248-90000.20: RNCC: 5 | RNVC: 2

1 Mar 1988

5340-12-164-4788
Extension Drawer Slide

121644788
5800820-132.015: RNCC: 3 | RNVC: 2
C42334-A192-C14: RNCC: 5 | RNVC: 2
C42334A192C14: RNCC: 5 | RNVC: 2
5800820-132-015: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-341-1932
Clamping Catch

123411932
DIN3133-D50ZN5: RNCC: 2 | RNVC: 2
D50DIN3133VERZINKT: RNCC: 5 | RNVC: 2
DIN3133-D50-ZN5: RNCC: 5 | RNVC: 2

7 Aug 1996

5340-12-192-5633
Spring Tension Clip

121925633
C42117-A322-B12: RNCC: 3 | RNVC: 2
C42117A322B12: RNCC: 5 | RNVC: 2

5 May 1982

5340-12-301-5871
Nonmetallic Bumper

123015871
9590202501: RNCC: 3 | RNVC: 2
7391942: RNCC: 5 | RNVC: 2
7391-942: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-701-1944
Angle Bracket

127011944
VG95211-ML-127011944: RNCC: 2 | RNVC: 2
5.12.0602.0531.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-364-2340
Mounting Plate

123642340
1019-0098: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-159-0508
Spring Tension Clip

121590508
69000-029: RNCC: 3 | RNVC: 2
5L3711-001-44: RNCC: 5 | RNVC: 2
BESTNR5123: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-7624
Retaining Strap

127017624
VG95211-ML-127017624: RNCC: 2 | RNVC: 2
5.12.7701.2411.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-4156
Dust And Moisture Seal Protective Cap

123544156
VG95211-ML-123544156: RNCC: 2 | RNVC: 2
2287898: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-322-6670
Electrical-Mechanical Equipment Post

123226670
00584-20220-04-002: RNCC: 3 | RNVC: 2

11 Sep 1990

5340-12-363-4401
Butt Hinge

123634401
058-003-0001: RNCC: 3 | RNVC: 2

16 Jun 2004

5340-12-179-3321
Dust And Moisture Seal Protective Cap

121793321
1361013-34003-03: RNCC: 3 | RNVC: 2

22 Jun 1979

5340-12-323-2116
Mounting Bracket

123232116
15 0004 017: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-043-7047

5340-12-022-0572

5340-12-377-1596
Mounting Bracket

123771596
41282690: RNCC: 3 | RNVC: 2

15 Dec 2008

5340-12-379-9111
Section Block Clamp

123799111
58080161: RNCC: 3 | RNVC: 2
58080161: RNCC: 5 | RNVC: 2
CV169112: RNCC: 5 | RNVC: 2

11 Sep 2009

5340-12-367-4254
Access Cover

123674254
181001001: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-12-090-5403

5340-12-337-2919
Helical Compression Spring Seat

123372919
04029201: RNCC: 3 | RNVC: 2
04029200: RNCC: 5 | RNVC: 2
04029201.874: RNCC: 5 | RNVC: 2

13 Feb 1995

5340-12-341-9156
Handle Grip

123419156
3218370170: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-12-040-1846

5340-12-360-4802
Dust And Moisture Seal Protective Plug

123604802
7777700010: RNCC: 3 | RNVC: 2
7777700010: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-328-9389
Nonmetallic Bumper

123289389
272.305 694: RNCC: 2 | RNVC: 2
272.305.694: RNCC: 3 | RNVC: 2
272.305 694: RNCC: 5 | RNVC: 9

2 Jul 1992

5340-12-311-3303
Angle Bracket

123113303
9030206: RNCC: 3 | RNVC: 2
181870018000: RNCC: 5 | RNVC: 2

18 Aug 1987

5340-12-378-8188
Access Cover

123788188
8691500004: RNCC: 3 | RNVC: 2
1125827013: RNCC: 5 | RNVC: 2
869 150 00 04: RNCC: 5 | RNVC: 2

15 May 2009

5340-12-377-1244
Mounting Plate

123771244
060.04.0242: RNCC: 3 | RNVC: 2
300.062.483: RNCC: 5 | RNVC: 2

12 Dec 2008

5340-12-179-5768
Spring Tension Clip

121795768
0009888678: RNCC: 3 | RNVC: 2

9 Jul 1979

5340-12-344-3513
Loop Clamp

123443513
111A32006: RNCC: 3 | RNVC: 2
111A32006 E1: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-182-1980
Bow Handle

121821980
4118150336: RNCC: 3 | RNVC: 2

18 Jan 1980

5340-12-331-6532
Lock-Release Lever

123316532
2909990144: RNCC: 3 | RNVC: 2
290 999 0144: RNCC: 5 | RNVC: 2

3 Jun 1993

5340-12-385-3515
Bow Handle

123853515
51.000.145: RNCC: 3 | RNVC: 2
51.000.145: RNCC: 5 | RNVC: 2

25 May 2011

5340-12-360-2844
Metal Grille

123602844
4110610343: RNCC: 3 | RNVC: 2

5 May 2003

5340-12-355-4867
Mounting Bracket

123554867
4615041440: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-187-9950
Double Angle Bracket

121879950
03060002: RNCC: 3 | RNVC: 2
29.07.15BB: RNCC: 5 | RNVC: 9
03060002.294: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-352-2846
Helical Compression Spring Retainer

123522846
5201607: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-12-319-7584
Expansion Shield

123197584
S7: RNCC: 3 | RNVC: 2
56106: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-303-1011
Dust And Moisture Seal Protective Cap

123031011
171711167B: RNCC: 3 | RNVC: 9

25 Feb 1985

5340-12-302-9755
Sealing Plug Assembly

123029755
0289 3519: RNCC: 3 | RNVC: 2
2893519: RNCC: 5 | RNVC: 2

13 Feb 1985

5340-12-122-6271
Spring Tension Clip

121226271
4045460275: RNCC: 3 | RNVC: 2
604041111800: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-374-3917
Rim Lock

123743917
100227: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-179-7595
Mounting Plate

121797595
81429062001: RNCC: 3 | RNVC: 2
81.42906.2001: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-094-1049

5340-12-358-7973
Turnbuckle Body

123587973
3812920033: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-193-9097
Resilient Mount

121939097
PAN5173C04: RNCC: 3 | RNVC: 2

13 Sep 1982

5340-12-391-5063
Loop Clamp

123915063
I006031TAN686A: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-12-385-1341
Webbing Strap

123851341
I011012: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-182-3268
Retaining Strap

121823268
2300033-610400-01: RNCC: 2 | RNVC: 2
2300033-610400-01: RNCC: 5 | RNVC: 9
2300033-610400.01: RNCC: 5 | RNVC: 9

25 Jan 1980

5340-12-334-6128
Multiple Angle Bracket

123346128
0002-100822A01B: RNCC: 2 | RNVC: 2
0002-100822A01B: RNCC: 3 | RNVC: 2

30 May 1994

5340-12-325-7885
Filler Opening Cap

123257885
025121321B: RNCC: 3 | RNVC: 2

9 Jul 1991

5340-12-357-3449
Compression Cup

123573449
0000940991: RNCC: 2 | RNVC: 2
0000940991: RNCC: 3 | RNVC: 2
15010092: RNCC: 5 | RNVC: 2

11 Jun 2002

5340-12-300-6736
Double Angle Bracket

123006736
4354920741: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-311-5128
Dust And Moisture Seal Protective Cap

123115128
2410500018: RNCC: 3 | RNVC: 2
0000740637: RNCC: 3 | RNVC: 2
23310148094: RNCC: 5 | RNVC: 2
OD20596: RNCC: 5 | RNVC: 2
2410500018: RNCC: 5 | RNVC: 2

11 Sep 1987

5340-12-135-6501

5340-12-195-8776
Angle Bracket

121958776
1241-8002.002: RNCC: 2 | RNVC: 2
1241-8002.002: RNCC: 3 | RNVC: 2
1241-8002-002: RNCC: 5 | RNVC: 2
1241-8002.002: RNCC: 5 | RNVC: 9

26 Apr 1983

5340-12-184-2526
Angle Bracket

121842526
5801357-1300.18: RNCC: 2 | RNVC: 2
5801357-1300.18: RNCC: 3 | RNVC: 2
5801357-1300-18: RNCC: 5 | RNVC: 2
5801357-1300-18: RNCC: 5 | RNVC: 9
5801357-1300-18: RNCC: 5 | RNVC: 9

10 Jul 1980

5340-12-347-8391
Verriegelun Buegel

123478391
14021-17011.06: RNCC: 3 | RNVC: 2
14021-17011-06: RNCC: 5 | RNVC: 2

19 Feb 1999

5340-12-171-9178
Loop Clamp

121719178
BRSP8012.114/48SKZ: RNCC: 3 | RNVC: 2
81.97445-0063: RNCC: 5 | RNVC: 2
2518012114: RNCC: 5 | RNVC: 2
BRSP8012-114-48SKZ: RNCC: 5 | RNVC: 2
81974450063: RNCC: 5 | RNVC: 2

29 Nov 1977

5340-12-332-5975
Dust And Moisture Seal Protective Cap

123325975
532116-9011.984: RNCC: 2 | RNVC: 2
532113-9011.984: RNCC: 3 | RNVC: 2
532113-9011.984: RNCC: 5 | RNVC: 9

26 Aug 1993

5340-12-164-7645
Pipe Bracket

121647645
23302-052900.00: RNCC: 2 | RNVC: 2
8403470: RNCC: 3 | RNVC: 2
0047703: RNCC: 5 | RNVC: 2
0047-703: RNCC: 5 | RNVC: 2
23302-052900: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-143-2947
Resilient Mount

121432947
VG95446T05H002Z: RNCC: 2 | RNVC: 2
56025012: RNCC: 3 | RNVC: 2
37G17-0045-03.001: RNCC: 5 | RNVC: 2
313064: RNCC: 5 | RNVC: 2
BG4-24-95S2: RNCC: 5 | RNVC: 9
BG4.24/95S2: RNCC: 5 | RNVC: 9
C40165-A373-C134: RNCC: 5 | RNVC: 9
5800820-1111.009: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-8534
Helical Compression Spring Seat

123378534
57762: RNCC: 3 | RNVC: 2
57762-16.10.78: RNCC: 5 | RNVC: 2
57762-341: RNCC: 5 | RNVC: 9

24 Apr 1995

5340-12-315-2875
Shimmy Damper

123152875
050490: RNCC: 3 | RNVC: 2
03-14-200-101-2500: RNCC: 5 | RNVC: 2

8 Oct 1988

5340-12-196-7803
Dust And Moisture Seal Protective Cap-Plug

121967803
4255040166: RNCC: 3 | RNVC: 2

16 Aug 1983

5340-12-182-6753
Key Blank

121826753
899: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-12-316-1526
Loop Clamp

123161526
3814921941: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-360-8726
Cremone Bolt

123608726
502603: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-12-166-9651
Dust And Moisture Seal Protective Cap

121669651
194946202: RNCC: 3 | RNVC: 9
194946202: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-026-0797

5340-12-360-7104
Access Cover

123607104
0002217-807: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-353-7079
Mounting Bracket

123537079
49005031100: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-388-2125
Angle Bracket

123882125
5841533840: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-367-6776
Spring Tension Clip

123676776
6674712241: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-12-307-4866
Mounting Bracket

123074866
5577115: RNCC: 3 | RNVC: 2

23 Jun 1986

5340-12-373-5797
Mounting Plate

123735797
1000287-208000.04: RNCC: 2 | RNVC: 2
1000287-208000.04: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-12-302-7036
Access Cover

123027036
178.E5.80: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-313-6814
Plug Button

123136814
025649: RNCC: 3 | RNVC: 2

26 Apr 1988

5340-12-198-0499
Access Cover

121980499
43711193-601: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-366-4358
Angle Bracket

123664358
105069: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-12-332-9991
Mounting Plate

123329991
160-75772: RNCC: 3 | RNVC: 2
160-75772: RNCC: 5 | RNVC: 9

20 Oct 1993

5340-12-125-4887

5340-12-352-1002
Mending Plate

123521002
5201204: RNCC: 3 | RNVC: 2

17 Oct 2000

5340-12-382-1042
Retaining Strap

123821042
2197812: RNCC: 3 | RNVC: 2

10 May 2010

5340-12-319-8908
Flush Lock

123198908
507100701: RNCC: 3 | RNVC: 2
3097603005: RNCC: 5 | RNVC: 2

14 Nov 1989

5340-12-352-1547
Blank Panel

123521547
F1RE9811: RNCC: 3 | RNVC: 2

23 Oct 2000

5340-12-329-4954
Angle Bracket

123294954
4618310042: RNCC: 3 | RNVC: 2

25 Aug 1992

5340-12-337-8963
Webbing Strap

123378963
4617900179: RNCC: 3 | RNVC: 2

2 May 1995

5340-12-090-5000

5340-12-180-2407
Rod End Clevis

121802407
DIN71752-G10X20-9SMN28K-PHOSPHAT: RNCC: 2 | RNVC: 2
DIN71752-G10X20-9SMNPB28K-PHOSPH: RNCC: 2 | RNVC: 2
DIN71752-G10X20-PHOSPHATIERT: RNCC: 2 | RNVC: 2
100200100020/002: RNCC: 3 | RNVC: 2
DIN71752-G10X20-PHOSPHATIERT: RNCC: 3 | RNVC: 2
DIN71752-G10X20-PHOSPHATIERT: RNCC: 3 | RNVC: 2
071752010000: RNCC: 5 | RNVC: 2
G10X20DIN71752PH0SPHATIERT: RNCC: 5 | RNVC: 2
071752010000: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-374-4458
Spacing Threaded Standoff

123744458
79257378: RNCC: 3 | RNVC: 2

18 Feb 2008

5340-12-364-5491
Mounting Plate

123645491
54.1107.513.01: RNCC: 3 | RNVC: 2

8 Oct 2004

5340-12-387-9293
Retaining Strap

123879293
7093776: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-373-3049
Butt Hinge

123733049
L713M1053215: RNCC: 3 | RNVC: 2

19 Oct 2007

5340-12-315-4112
Spring Tension Clip

123154112
171721570A: RNCC: 3 | RNVC: 2
171721570A: RNCC: 5 | RNVC: 2
960.10.45.509: RNCC: 5 | RNVC: 2

20 Oct 1988

5340-12-044-1125

5340-12-374-2672
Access Cover

123742672
3132174: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-12-374-3032
Retaining Strap

123743032
5324898: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-349-6079
Headless Straight Rod

123496079
T524M1513226: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-373-1472
Nonmetallic Bumper

123731472
S533M50X1007: RNCC: 2 | RNVC: 2
S533M50X1007: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-12-178-2300
Retaining Clip

121782300
C107-A103-C96: RNCC: 2 | RNVC: 2
C107A103C96: RNCC: 3 | RNVC: 2
C107-A103-C96: RNCC: 5 | RNVC: 2
C107A103C96: RNCC: 5 | RNVC: 2
C107-A103-C96: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-700-4375
Hand Crank

127004375
865.93.SB194: RNCC: 2 | RNVC: 2

26 May 1992

5340-12-143-2957
Webbing Strap

121432957
RELGH394TZ55: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-308-0197
Double Angle Bracket

123080197
2300005-3700.01: RNCC: 2 | RNVC: 2
2300005-3700.01: RNCC: 3 | RNVC: 2
2300005-3700.01: RNCC: 5 | RNVC: 9

21 Aug 1986

5340-12-307-6529
Webbing Strap

123076529
4983045: RNCC: 3 | RNVC: 2

11 Jul 1986

5340-12-335-0498
Angle Bracket

123350498
0048-200000A01B: RNCC: 2 | RNVC: 2
0048-200000A01B: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-092-3929

5340-12-391-4118
Lock-Release Lever

123914118
06460-2081X30: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-12-393-2999
Mounting Plate

123932999
500210: RNCC: 3 | RNVC: 2
3005: RNCC: 5 | RNVC: 2

5 Sep 2013

5340-12-374-5760
Cremone Bolt

123745760
1099-U1: RNCC: 3 | RNVC: 2

27 Feb 2008

5340-12-308-1890
Flush Lock

123081890
4607200535: RNCC: 3 | RNVC: 2

11 Sep 1986

5340-12-366-4051
Mounting Bracket

123664051
943278803: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-12-386-5781
Dust And Moisture Seal Protective Cap-Plug

123865781
800071: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-306-0951
Resilient Mount

123060951
35343-010: RNCC: 3 | RNVC: 2
E1E 31S 38 BL: RNCC: 3 | RNVC: 2
E1E31S38BL: RNCC: 5 | RNVC: 2
35 343-010: RNCC: 5 | RNVC: 9

27 Jan 1986

5340-12-392-6758
Dust And Moisture Seal Protective Cap

123926758
GPN200Z8X30-RAL3000: RNCC: 3 | RNVC: 2
200Z8X30-RAL3000: RNCC: 5 | RNVC: 2
9560155180: RNCC: 5 | RNVC: 2
200Z8X30-RAL3000: RNCC: 5 | RNVC: 2

27 Jun 2013

5340-12-151-7794
Retaining Strap

121517794
BD7001T913: RNCC: 3 | RNVC: 2
BD7001T913: RNCC: 3 | RNVC: 9
1292001-000148-913: RNCC: 5 | RNVC: 9
1292001-000148.913: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-3357
Headless Straight Rod

121843357
5801352-1870.00: RNCC: 2 | RNVC: 2
5801352-1870.00: RNCC: 3 | RNVC: 2
5801352-1870-00: RNCC: 5 | RNVC: 9
5801352-1870-00: RNCC: 5 | RNVC: 9
5801352-1870-00: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-304-4313
Dust And Moisture Seal Protective Cap

123044313
290/016: RNCC: 3 | RNVC: 2
GPN290/290016: RNCC: 5 | RNVC: 2
290016: RNCC: 5 | RNVC: 9
290016000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-304-1387
Plug Button

123041387
4.021-1611-0008: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-135-6764
Butt Hinge

121356764
DIN7954-B60-ST-ZN: RNCC: 2 | RNVC: 2
51GZ-60X46X1,4: RNCC: 3 | RNVC: 2
DIN7954-B60-ST-BK: RNCC: 5 | RNVC: 9
B60DIN7954: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-2452
Mounting Bracket

127022452
VG95211-ML-127022452: RNCC: 2 | RNVC: 2
30.7800.3: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-4763
Retaining Clip

123014763
7820211772: RNCC: 3 | RNVC: 2
78202 11772: RNCC: 5 | RNVC: 9

18 Oct 1984

5340-12-377-1992
Rigid Caster

123771992
301102: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-174-6443
Access Cover

121746443
65-7058-616-01: RNCC: 3 | RNVC: 2
H38-1337-50: RNCC: 5 | RNVC: 2

17 Jul 1978

5340-12-701-6242
Mounting Plate

127016242
VG95211-ML-127016242: RNCC: 2 | RNVC: 2
5.12.7030.1600.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-2876
Shimmy Damper

123152876
056057: RNCC: 3 | RNVC: 2
03-14-200-101-2000: RNCC: 5 | RNVC: 2

8 Oct 1988

5340-12-306-8278
Retaining Strap

123068278
C42334-A228-C90: RNCC: 3 | RNVC: 2

8 Apr 1986

5340-12-179-3700
Bow Handle

121793700
5800820-135: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-12-373-8716
Mending Plate

123738716
J51520030-015: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-12-023-1829

5340-12-194-3752
Retaining Strap

121943752
65.7096.200.04-A001: RNCC: 3 | RNVC: 2
253790: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-169-7542
Spring Tension Clip

121697542
A11A336250004: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-304-2837
Flush Lock

123042837
191827573: RNCC: 3 | RNVC: 9
321827573: RNCC: 5 | RNVC: 9

5 Jul 1985

5340-12-373-4196
Dust And Moisture Seal Protective Cap

123734196
02415373: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-12-370-2371
Manual Control Handle

123702371
306B.AKA1.3160.00: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-12-349-4495
Escutcheon Plate

123494495
T521M1302213: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-393-6061
Nut And Bolt Head Protective Cap

123936061
000060500: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-12-360-0986
Angle Bracket

123600986
9424290240: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-333-0023
Runner

123330023
5900046-1200.03: RNCC: 2 | RNVC: 2
21-1200.03: RNCC: 3 | RNVC: 2
21-1200-03: RNCC: 3 | RNVC: 2
21-1200.03: RNCC: 5 | RNVC: 9
21-1200-03: RNCC: 5 | RNVC: 9

20 Oct 1993

5340-12-199-4191
Angle Bracket

121994191
2300088-511002.00: RNCC: 2 | RNVC: 2
2300088-511002-00: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-195-5063
Handwheel

121955063
DIN390-B100-GTW: RNCC: 2 | RNVC: 2
B100DIN390-GTW: RNCC: 5 | RNVC: 2

7 Mar 1983

5340-12-181-1989
Retaining Strap

121811989
44-21606: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-357-7765
Section Block Clamp

123577765
J29120258-001: RNCC: 3 | RNVC: 2
008008450: RNCC: 5 | RNVC: 2

23 Jul 2002

5340-12-349-2370
Plain Solid Disk

123492370
58121: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-12-173-4303
Dust And Moisture Seal Protective Plug

121734303
01TC30492: RNCC: 3 | RNVC: 2

14 Apr 1978

5340-12-327-4690
Nonmetallic Bumper

123274690
702-143218-902-0: RNCC: 2 | RNVC: 2
702-143218-902-0: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-12-365-2537
Access Cover

123652537
2500278-193121.000.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-378-3875
Dust And Moisture Seal Protective Cap

123783875
A125NO20975: RNCC: 3 | RNVC: 2
0553039: RNCC: 5 | RNVC: 2

1 Apr 2009

5340-12-366-5765
Flange Protector

123665765
5403: RNCC: 3 | RNVC: 2

10 May 2005

5340-12-180-0495
Manual Control Handle

121800495
81618526001: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-374-8414
Loop Clamp

123748414
MBBN3126-08A2: RNCC: 3 | RNVC: 2

31 Mar 2008

Load More Results