What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 81 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 81 of 178

5340-12-368-8359
Manual Control Lever

123688359
724012008: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-12-318-5842
Nonmetallic Bumper

123185842
4357437441: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-347-6107
Door Handle

123476107
81.8158.8002 + 88.8110.0753: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-12-318-1633
Angle Bracket

123181633
54.0026.187.02: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-043-9895

5340-12-301-1972
Shelf Bracket

123011972
TK-BA35-5340-269: RNCC: 2 | RNVC: 2
M0205 6100: RNCC: 3 | RNVC: 2
1513-850.19(3): RNCC: 5 | RNVC: 9

27 Sep 1984

5340-12-318-2461
Mending Plate

123182461
4080-009: RNCC: 3 | RNVC: 9

22 Jun 1989

5340-12-188-5097
Dust And Moisture Seal Protective Cap

121885097
VG95211-ML-121885097: RNCC: 2 | RNVC: 2
4025090295: RNCC: 3 | RNVC: 2

15 Jul 1981

5340-12-176-6264
Nonmetallic Bumper

121766264
5800820-11124: RNCC: 3 | RNVC: 2
5800820-11124: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-322-4720
Angle Bracket

123224720
43711566-601: RNCC: 3 | RNVC: 2

24 Aug 1990

5340-12-383-7046
Bumper

123837046
50041998: RNCC: 3 | RNVC: 2
04397471: RNCC: 5 | RNVC: 2
50041998: RNCC: 5 | RNVC: 2

26 Nov 2010

5340-12-307-9284
Plug Button

123079284
2996.60.74: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-134-3480

5340-12-357-2791
Mounting Bracket

123572791
0005460146: RNCC: 3 | RNVC: 2

29 May 2002

5340-12-312-4741
Angle Bracket

123124741
2300013-4529.00: RNCC: 2 | RNVC: 2
2300013-4529.00: RNCC: 3 | RNVC: 2
2300013-4529.00: RNCC: 5 | RNVC: 9
2300013-4529.00: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-158-0797
Handwheel

121580797
510111040: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-332-5245
Nut And Bolt Retainer

123325245
4660401: RNCC: 3 | RNVC: 2
46604 01: RNCC: 5 | RNVC: 2

18 Aug 1993

5340-12-333-2108
Double Angle Bracket

123332108
81429025160: RNCC: 2 | RNVC: 2
81429025160: RNCC: 3 | RNVC: 2
81.42902.5160: RNCC: 5 | RNVC: 2

10 Nov 1993

5340-12-319-9700
Mounting Bracket

123199700
4617780129: RNCC: 3 | RNVC: 2
7211763011: RNCC: 3 | RNVC: 9

23 Nov 1989

5340-12-319-9834
Rod End Connector

123199834
09 0004 117: RNCC: 3 | RNVC: 2

24 Nov 1989

5340-12-321-7213
Webbing Strap

123217213
4618900181: RNCC: 3 | RNVC: 2

19 Jun 1990

5340-12-381-7785
Mounting Plate

123817785
1690-513100.002.0: RNCC: 3 | RNVC: 2

30 Mar 2010

5340-12-369-4138
Cushioning Pad

123694138
1 609 202 430: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-12-197-9119
Angle Bracket

121979119
CF 325 697 B: RNCC: 3 | RNVC: 2
CF 325 697 A: RNCC: 5 | RNVC: 2
CF 325 697 B: RNCC: 5 | RNVC: 2
CF 325 697 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-158-4157
Leather Strap

121584157
1213-320-8: RNCC: 3 | RNVC: 2
1213-320-8: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-335-4973
Runner

123354973
785105: RNCC: 3 | RNVC: 2
E)MS NR.785105: RNCC: 5 | RNVC: 2
785105: RNCC: 5 | RNVC: 9

23 Aug 1994

5340-12-322-0740
Mounting Bracket

123220740
1427-71: RNCC: 3 | RNVC: 2

20 Jul 1990

5340-12-180-4696
Mounting Bracket

121804696
3828990114: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-303-9291
Flush Lock

123039291
191823509: RNCC: 3 | RNVC: 9

21 May 1985

5340-12-303-5782
Mending Plate

123035782
52.0261.500.01: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-366-0280
Angle Bracket

123660280
S259M7016212: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-375-4521
Access Cover

123754521
0730361172: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-044-2948

5340-12-020-7371

5340-12-191-0337
Retaining Clip

121910337
B32042: RNCC: 3 | RNVC: 2
33669000: RNCC: 5 | RNVC: 2
321971847: RNCC: 5 | RNVC: 2

7 Jan 1982

5340-12-311-9347
Nonmetallic Bumper

123119347
780.68.31: RNCC: 3 | RNVC: 9
501717977: RNCC: 5 | RNVC: 2

30 Oct 1987

5340-12-176-0995
Dust And Moisture Seal Protective Plug

121760995
1483480000: RNCC: 3 | RNVC: 2
02401: RNCC: 5 | RNVC: 2

8 Nov 1978

5340-12-374-5521
Mounting Bracket

123745521
453 6516-801: RNCC: 3 | RNVC: 2
453 6516-801: RNCC: 5 | RNVC: 2

26 Feb 2008

5340-12-350-5932
Door Button

123505932
54.1038.130.25: RNCC: 2 | RNVC: 2
54.1038.130.25: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-333-6475
Webbing Strap

123336475
5802017-701140.00: RNCC: 2 | RNVC: 2
5802017-701140.00: RNCC: 5 | RNVC: 2

18 Jan 1994

5340-12-094-0934

5340-12-327-7748
Expansion Shield

123277748
6739880025: RNCC: 3 | RNVC: 9

28 Feb 1992

5340-12-301-6369
Angle Bracket

123016369
43712231-601: RNCC: 2 | RNVC: 2
43712231-601: RNCC: 3 | RNVC: 2
43712231-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-175-2150
Angle Bracket

121752150
51974800249: RNCC: 3 | RNVC: 2

30 Aug 1978

5340-12-198-1999
Angle Bracket

121981999
6065501: RNCC: 3 | RNVC: 2

29 Dec 1983

5340-12-312-9210
Access Cover

123129210
164354: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-163-8845
Handwheel

121638845
513701303: RNCC: 3 | RNVC: 2
01303: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-9581
Strap Bolt

123289581
2300232-971570.001.0: RNCC: 2 | RNVC: 2
2300232-971570.001.0: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-375-9341
Lock-Release Lever

123759341
2229756: RNCC: 3 | RNVC: 2
02229755-1-B: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-12-319-6150
Mounting Plate

123196150
B-A: RNCC: 3 | RNVC: 2
602793614: RNCC: 5 | RNVC: 2

18 Oct 1989

5340-12-311-2817
Plug Button

123112817
46712300161: RNCC: 3 | RNVC: 9

12 Aug 1987

5340-12-361-4028
Access Cover

123614028
701810903: RNCC: 3 | RNVC: 2

23 Sep 2003

5340-12-376-2285
Spring Tension Clip

123762285
000000005649: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-12-345-8783
Mounting Bracket

123458783
52.0271.915.03: RNCC: 3 | RNVC: 2

11 May 1998

5340-12-393-7764
Block Clamp

123937764
ECS6088G1C20: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-370-5155
Retaining Strap

123705155
3464920040: RNCC: 3 | RNVC: 2
346 492 00 40: RNCC: 5 | RNVC: 2

16 Nov 2006

5340-12-192-6436
Helical Compression Spring Seat

121926436
2410122000: RNCC: 3 | RNVC: 2

11 May 1982

5340-12-364-5723
Mounting Bracket

123645723
T257M2110101: RNCC: 2 | RNVC: 2
T257M2110101: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-12-394-1899
Loop Clamp

123941899
F9259085000200: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-323-2469
Mounting Bracket

123232469
6031870740: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-12-388-0770
Mounting Plate

123880770
8491810003: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-360-6681
Split Tubular Clip

123606681
0009642343: RNCC: 3 | RNVC: 2
0009642343: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-358-7923
Webbing Strap

123587923
2500271-71200.17: RNCC: 2 | RNVC: 2
185045: RNCC: 3 | RNVC: 2
2500271-71200.17: RNCC: 5 | RNVC: 9

14 Nov 2002

5340-12-194-4486
Metal Runner

121944486
5800256-68020: RNCC: 3 | RNVC: 2
5800256-68020: RNCC: 5 | RNVC: 9

4 Nov 1982

5340-12-185-1210
Mending Plate

121851210
2702044400: RNCC: 3 | RNVC: 2
27020 44400: RNCC: 5 | RNVC: 9

11 Sep 1980

5340-12-303-0241
Mending Plate

123030241
0008354114: RNCC: 3 | RNVC: 2

21 Feb 1985

5340-12-041-9812

5340-12-043-2672

5340-12-312-3024
Mending Plate

123123024
53.0428.005.04: RNCC: 2 | RNVC: 2
53.0428.005.04: RNCC: 3 | RNVC: 2

14 Dec 1987

5340-12-375-4303
Loop Holder

123754303
T13272: RNCC: 3 | RNVC: 2

2 Jun 2008

5340-12-022-9427

5340-12-351-4484
Spring Tension Clip

123514484
T672M1030207: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-12-329-7629
Angle Bracket

123297629
81082400013: RNCC: 3 | RNVC: 2
81.08240.0013: RNCC: 5 | RNVC: 9

24 Sep 1992

5340-12-315-9590
Angle Bracket

123159590
6203010240: RNCC: 3 | RNVC: 2
620 301 02 40: RNCC: 5 | RNVC: 2

9 Dec 1988

5340-12-024-7436

5340-12-369-2151
Section Block Clamp

123692151
70319: RNCC: 3 | RNVC: 2
AT 16/3: RNCC: 5 | RNVC: 2

6 Jun 2006

5340-12-319-6544
Mending Plate

123196544
6100.040.2: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-385-9615
Access Cover

123859615
2500262-393710.001.0: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-12-387-4005
Double Angle Bracket

123874005
1030229-171198.003.0: RNCC: 3 | RNVC: 2

9 Dec 2011

5340-12-392-8015
Mounting Bracket

123928015
121W066001.002.0: RNCC: 2 | RNVC: 2
121W066001.002.0: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-12-348-2228
Helical Compression Spring Seat

123482228
2433124373: RNCC: 3 | RNVC: 2
2 433 124 373: RNCC: 5 | RNVC: 2

10 May 1999

5340-12-348-0315
Mounting Bracket

123480315
58R059-84619-4: RNCC: 2 | RNVC: 2
58R059-84619-4: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-344-0498
Mending Plate

123440498
2996.10.64: RNCC: 3 | RNVC: 2
2996.1064: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-365-4742
Retaining Bail

123654742
54.1067.543.04: RNCC: 3 | RNVC: 2

7 Jan 2005

5340-12-372-0622
Angle Bracket

123720622
8411629: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-320-4397
Dust And Moisture Seal Protective Plug

123204397
620U10B: RNCC: 3 | RNVC: 2
GPN620,U10B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-336-9125
Mounting Bracket

123369125
5801392-910117: RNCC: 3 | RNVC: 2

23 Dec 1994

5340-12-140-7910

5340-12-304-2567
Webbing Strap

123042567
5802079-810: RNCC: 2 | RNVC: 2
5802079-810: RNCC: 3 | RNVC: 2
5802079-810: RNCC: 5 | RNVC: 9

3 Jul 1985

5340-12-360-4053
Seal Retaining Plate

123604053
6710013: RNCC: 3 | RNVC: 2

19 May 2003

5340-12-361-4140
Manual Control Lever

123614140
BD8237G001: RNCC: 3 | RNVC: 2
BD8237G001: RNCC: 5 | RNVC: 9

25 Sep 2003

5340-12-337-3658
Webbing Strap

123373658
81669506005: RNCC: 3 | RNVC: 2
81.66950.6005: RNCC: 5 | RNVC: 2
81.66950.6003: RNCC: 5 | RNVC: 9

21 Feb 1995

5340-12-306-8637
Lock-Release Lever

123068637
544325033: RNCC: 3 | RNVC: 2

11 Apr 1986

5340-12-334-4071
Quick Release Plunger

123344071
2207.318: RNCC: 3 | RNVC: 2
1079843W00: RNCC: 5 | RNVC: 2

4 May 1994

5340-12-360-0066
Mounting Bracket

123600066
9415406973: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-370-9507
Bow Handle

123709507
80806: RNCC: 3 | RNVC: 2

19 Jan 2007

5340-12-334-0372
Dust And Moisture Seal Protective Cap

123340372
01TC34485: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-12-190-8959
Resilient Mount

121908959
61003: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-094-9191

5340-12-346-4073
Rod End Connector

123464073
2300002-185810.000: RNCC: 2 | RNVC: 2
2300002-185810.000: RNCC: 3 | RNVC: 2

22 Jul 1998

5340-12-186-0337
Loop Clamp

121860337
81974200019: RNCC: 3 | RNVC: 2

25 Nov 1980

5340-12-300-8444
Pad Eye

123008444
3520721940: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-302-7620
Metal Runner

123027620
2537301: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-197-3183
Nut And Bolt Locking Plate

121973183
3164660173: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-12-323-4781
Resilient Mount

123234781
1212 9064: RNCC: 3 | RNVC: 2
12129064KZ0111-47: RNCC: 5 | RNVC: 2
3.602.9.085.043.6: RNCC: 5 | RNVC: 2

29 Nov 1990

5340-12-317-6632
Nut And Bolt Locking Plate

123176632
1269 302 164: RNCC: 3 | RNVC: 2
8781312: RNCC: 5 | RNVC: 2
1269302164: RNCC: 5 | RNVC: 2
2199490: RNCC: 5 | RNVC: 2
1269302164: RNCC: 5 | RNVC: 2
91619468: RNCC: 5 | RNVC: 2
0696468: RNCC: 5 | RNVC: 2
81.90801-0277: RNCC: 5 | RNVC: 2
81908010277: RNCC: 5 | RNVC: 2

26 Apr 1989

5340-12-192-5163
Access Cover

121925163
5080763: RNCC: 3 | RNVC: 2

3 May 1982

5340-12-185-3730
Dust And Moisture Seal Protective Cap

121853730
1520500012: RNCC: 3 | RNVC: 2

30 Sep 1980

5340-12-346-7533
Access Cover

123467533
8474.1009: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-348-6707
Handle Grip

123486707
0907601: RNCC: 2 | RNVC: 2
0907601: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-372-5100
Verbindungsstueck

123725100
10021064: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-12-353-7626
Nonmetallic Solid Wheel

123537626
47067905900: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-372-7126
Mounting Bracket

123727126
D4075088: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-12-384-5945
Mounting Bracket

123845945
1681038341: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-316-7243
Access Door

123167243
0008302742: RNCC: 3 | RNVC: 2
000 830 27 42: RNCC: 5 | RNVC: 2

7 Feb 1989

5340-12-348-2105
Helical Compression Spring Seat

123482105
074289: RNCC: 3 | RNVC: 2
1211-134: RNCC: 5 | RNVC: 2
1211-134: RNCC: 5 | RNVC: 2

6 May 1999

5340-12-385-0406
Spacing Threaded Standoff

123850406
5592030262: RNCC: 3 | RNVC: 2
5562030162 TEIL 5592030262: RNCC: 5 | RNVC: 2

21 Apr 2011

5340-12-020-4010

5340-12-194-7445
Retaining Strap

121947445
160-75409: RNCC: 3 | RNVC: 2
160-75409: RNCC: 5 | RNVC: 9

3 Dec 1982

5340-12-380-5595
Mounting Plate

123805595
1759353: RNCC: 3 | RNVC: 2

9 Nov 2009

5340-12-196-9897
Spring Tension Clip

121969897
4358687034: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-12-365-8507
Threaded Rod End

123658507
MBCS1138: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-042-1173

5340-12-322-2708
Door Holder

123222708
40 0165 551: RNCC: 2 | RNVC: 2
40 0165 551: RNCC: 3 | RNVC: 2
40 0165 551: RNCC: 5 | RNVC: 9

7 Aug 1990

5340-12-090-7521

5340-12-353-1805
Retaining Strap

123531805
L496420: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-040-2028

5340-12-194-2115
Lock-Release Lever

121942115
5549617: RNCC: 3 | RNVC: 2
554.9617: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-360-1541
Mounting Bracket

123601541
9425244240: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-180-0574
Webbing Strap

121800574
3818600194: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-387-4848
Webbing Strap

123874848
57.000.050: RNCC: 3 | RNVC: 2

28 Dec 2011

5340-12-363-7420
Access Cover

123637420
0224 8658: RNCC: 3 | RNVC: 2

20 Jul 2004

5340-12-359-6013
Access Cover

123596013
15778801: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-363-7598
Angle Bracket

123637598
81675400002: RNCC: 3 | RNVC: 2

22 Jul 2004

5340-12-369-9491
Access Cover

123699491
62055: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-12-365-3907
Mounting Bracket

123653907
2500267-331121.000.0: RNCC: 2 | RNVC: 2
2500267-331121.000.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-338-3889
Retaining Strap

123383889
1201604: RNCC: 3 | RNVC: 2
BG/S: RNCC: 5 | RNVC: 2

30 Jun 1995

5340-12-319-5029
Mending Plate

123195029
4900059-748100.004.0: RNCC: 3 | RNVC: 2
1227039: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-386-1977
Access Cover

123861977
2500262-748100.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-354-7699
Mending Plate

123547699
5.001-685.0: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-12-388-1303
Mounting Bracket

123881303
10194-203000.011.0: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-301-1980
Pipe Bracket

123011980
1423-910.36(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-358-8141
Mounting Bracket

123588141
4.042-890.0: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-12-179-4001
Resilient Mount

121794001
57351390243: RNCC: 3 | RNVC: 2
5 735 139 02 43: RNCC: 5 | RNVC: 2
0008900501: RNCC: 5 | RNVC: 2
735139S2: RNCC: 5 | RNVC: 2
0008900501: RNCC: 5 | RNVC: 2

27 Jun 1979

5340-12-339-7820
Mounting Bracket

123397820
6735125: RNCC: 2 | RNVC: 2
6735125: RNCC: 3 | RNVC: 2
6735125: RNCC: 5 | RNVC: 9

17 Jan 1996

5340-12-384-9746
Bumper

123849746
8C9425: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-163-9814
Mending Plate

121639814
2500006-4640: RNCC: 2 | RNVC: 2
2500006-4640: RNCC: 3 | RNVC: 2
TK6092-4640: RNCC: 3 | RNVC: 2
2500006-4640: RNCC: 5 | RNVC: 9
2500006-4640: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-325-7588
Schlosz Schluessel

123257588
SCHLUESSEL 4010LI-BC0286: RNCC: 3 | RNVC: 2
BC0286: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-172-3183
Loop Clamp

121723183
SCH812-TRANSPARENT: RNCC: 3 | RNVC: 2
60012: RNCC: 5 | RNVC: 2
SCH812: RNCC: 5 | RNVC: 2
2600121: RNCC: 5 | RNVC: 9

10 Jan 1978

5340-12-309-8491
Retaining Strap

123098491
840529-10.00: RNCC: 3 | RNVC: 2

11 Mar 1987

5340-12-388-0247
Dust And Moisture Seal Protective Cover

123880247
0626-267: RNCC: 3 | RNVC: 2
F2-0626-267: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-12-316-4770
Bow Handle

123164770
22013.0.08.231.00: RNCC: 2 | RNVC: 2
22013.0.08.231.00: RNCC: 3 | RNVC: 2

19 Jan 1989

5340-12-169-2031
Mending Plate

121692031
CF 409 752 A: RNCC: 2 | RNVC: 2
CF 409 752 A: RNCC: 3 | RNVC: 2
CF409752A: RNCC: 5 | RNVC: 2
CF409752A: RNCC: 5 | RNVC: 2
CF409752A: RNCC: 5 | RNVC: 2
CF 409 752 A: RNCC: 5 | RNVC: 2
CF 409 752 A: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-366-7645
Loop Clamp

123667645
DIN3015-Z-KP-1-R-8-8-PA: RNCC: 2 | RNVC: 2

6 Jun 2005

5340-12-313-2620
Mending Plate

123132620
4.0064: RNCC: 3 | RNVC: 2
08121093: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-197-0524
Hinge Torsion Bar

121970524
01000101: RNCC: 3 | RNVC: 2
0008630251: RNCC: 5 | RNVC: 2
65547: RNCC: 5 | RNVC: 2
16931: RNCC: 5 | RNVC: 2

14 Sep 1983

5340-12-197-0423
Bridge Clamp

121970423
4359317132: RNCC: 3 | RNVC: 2
4359317132: RNCC: 3 | RNVC: 9

13 Sep 1983

5340-12-366-0461
Retaining Strap

123660461
CBD45419P12: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-173-4293
Clamping Catch

121734293
4178708: RNCC: 3 | RNVC: 2

14 Apr 1978

5340-12-011-4404

5340-12-026-4931

5340-12-358-9206
Double Angle Bracket

123589206
4244760136: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-123-8775
Escutcheon Plate

121238775
113837235A: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-153-8122
Stopfen

121538122
1513203033: RNCC: 3 | RNVC: 2
05546: RNCC: 5 | RNVC: 2
FWM05546: RNCC: 5 | RNVC: 2
1513203033: RNCC: 5 | RNVC: 2
VDPM00768: RNCC: 5 | RNVC: 2
FWM05546: RNCC: 5 | RNVC: 9
05546: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-6533
Vent Plug

123266533
251482990200: RNCC: 3 | RNVC: 2
251482990200: RNCC: 5 | RNVC: 2
251482990200: RNCC: 5 | RNVC: 2
251482990200: RNCC: 5 | RNVC: 2

18 Oct 1991

5340-12-373-0772
Protection Bellows

123730772
9123 6609: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-12-354-1793
Angle Bracket

123541793
03878601: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-393-4011
Access Cover

123934011
115394: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-362-4757
Nonmetallic Bumper

123624757
SJ5780: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-362-8023
Mounting Plate

123628023
10020925: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-352-0595
Plain Solid Disk

123520595
3360045: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-334-2229
Retaining Strap

123342229
54.0072.122.00: RNCC: 3 | RNVC: 2

14 Apr 1994

5340-12-302-4880
Loop Clamp

123024880
100109-6920: RNCC: 2 | RNVC: 2
100109-6920: RNCC: 3 | RNVC: 2
100109-6920: RNCC: 5 | RNVC: 9

7 Jan 1985

5340-12-179-6869
Angle Bracket

121796869
81615402013: RNCC: 3 | RNVC: 2

18 Jul 1979

5340-12-357-5779
Spring Tension Clip

123575779
0019831113: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-144-9324
Buckle

121449324
TAN16625: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-197-5152
Bow Handle

121975152
5670-80MM-MMCH: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-197-0222
Dust And Moisture Seal Protective Plug

121970222
7434.0: RNCC: 3 | RNVC: 2

12 Sep 1983

5340-12-331-8075
Access Cover

123318075
10137801: RNCC: 2 | RNVC: 2
10137801: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-378-9214
Rigid Caster

123789214
B-POEV 160 R-SB: RNCC: 3 | RNVC: 2

28 May 2009

5340-12-333-4874
Spacing Threaded Standoff

123334874
0384893D02: RNCC: 3 | RNVC: 2

22 Dec 1993

5340-12-300-3109
Dust And Moisture Seal Protective Plug

123003109
3099870344: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-315-5094
Access Door

123155094
3000-318000.07: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-12-179-0692
Nonmetallic Bumper

121790692
CF 432 171: RNCC: 2 | RNVC: 2
CF 432 171: RNCC: 3 | RNVC: 2
CF 432 171: RNCC: 5 | RNVC: 2
CF432171: RNCC: 5 | RNVC: 2
CF 432 171: RNCC: 5 | RNVC: 2
CF432171: RNCC: 5 | RNVC: 2
CF432171: RNCC: 5 | RNVC: 2

6 Jun 1979

5340-12-364-5233
Fuehrungs- Schiene

123645233
54.1105.194.00: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-191-7367
Loop Clamp

121917367
3819950044: RNCC: 3 | RNVC: 2

1 Mar 1982

5340-12-384-3473
Loop Clamp

123843473
038 480 011 018: RNCC: 3 | RNVC: 2
99707033507: RNCC: 5 | RNVC: 2

15 Feb 2011

5340-12-304-0660
Retaining Band

123040660
1000042-190300.02M01: RNCC: 3 | RNVC: 2

7 Jun 1985

5340-12-361-4471
Helical Compression Spring Seat

123614471
8690170350: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-12-388-0623
Bow Handle

123880623
714095: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-12-359-8461
Mounting Bracket

123598461
0130 7829: RNCC: 3 | RNVC: 2
1421910076: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-327-3983
Loop Clamp

123273983
LN9490BK4: RNCC: 2 | RNVC: 2

21 Jan 1992

5340-12-314-0988
Angle Bracket

123140988
029127701: RNCC: 3 | RNVC: 2

7 Jun 1988

5340-12-198-7891
Nonmetallic Bumper

121987891
3354320218: RNCC: 3 | RNVC: 2

27 Feb 1984

5340-12-377-0282
Handwheel

123770282
10032072: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-12-310-3165
Clamping Catch

123103165
81418600040: RNCC: 3 | RNVC: 2
KN513: RNCC: 3 | RNVC: 2
81.41860.0040: RNCC: 5 | RNVC: 2
1052456: RNCC: 5 | RNVC: 2

8 May 1987

5340-12-305-6270
Loop Clamp

123056270
136A45012: RNCC: 3 | RNVC: 2

28 Nov 1985

5340-12-373-0843
Mounting Plate

123730843
DPAI 386: RNCC: 3 | RNVC: 2

25 Sep 2007

5340-12-352-6775
Angle Bracket

123526775
5400049-725040.02: RNCC: 2 | RNVC: 2
5400049-725040.02: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-321-1296
Angle Bracket

123211296
75/2: RNCC: 3 | RNVC: 2
75/2: RNCC: 5 | RNVC: 2
75/2: RNCC: 5 | RNVC: 9

30 Mar 1990

5340-12-305-5066
Helical Compression Spring Retainer

123055066
379241: RNCC: 3 | RNVC: 2

15 Nov 1985

5340-12-361-0799
Mounting Bracket

123610799
0853 9350.050: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-303-9915
Bow Handle

123039915
8450040006: RNCC: 3 | RNVC: 2
84500 40006: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-177-7969
Dust And Moisture Seal Protective Plug

121777969
SP5R0T: RNCC: 3 | RNVC: 2
SP5R0T: RNCC: 5 | RNVC: 2

21 Feb 1979

5340-12-181-1730
Loop Clamp

121811730
251156200011: RNCC: 3 | RNVC: 2
6153004: RNCC: 5 | RNVC: 2
251156200011: RNCC: 5 | RNVC: 2
2540001309: RNCC: 5 | RNVC: 2

29 Oct 1979

5340-12-300-8051
Dust And Moisture Seal Protective Cap

123008051
3854000020: RNCC: 3 | RNVC: 2

31 Aug 1984

5340-12-372-0046
Mounting Plate

123720046
2660443: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-022-8014

5340-12-328-9153
Dust And Moisture Seal Protective Cap

123289153
MH0354: RNCC: 3 | RNVC: 2
62500.331.020: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-348-6781
Double Angle Bracket

123486781
182149: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-024-6519

5340-12-367-7616
Mounting Plate

123677616
5592370935: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-12-354-1192
Dust And Moisture Seal Protective Plug

123541192
03756700: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-043-2719

5340-12-379-3006
Angle Bracket

123793006
0069313: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-331-4820
Catch Strike

123314820
4682010258: RNCC: 3 | RNVC: 2

10 May 1993

5340-12-381-9001
Helical Compression Spring Seat

123819001
18.0032.0014: RNCC: 3 | RNVC: 2

15 Apr 2010

5340-12-358-7374
Nonmetallic Bumper

123587374
2719-514210.004.0: RNCC: 2 | RNVC: 2
2719-514210.004.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-363-6507
Dust And Moisture Seal Protective Plug

123636507
2300007-261800.000.0: RNCC: 2 | RNVC: 2
2300007-261800.000.0: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-12-320-7035
Strap Hinge Leaf

123207035
CF 493 050 A: RNCC: 2 | RNVC: 2
CF 493 050 A: RNCC: 3 | RNVC: 2
CF 493 050 A: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-190-7010
Nonmetallic Bumper

121907010
CF 482 249 A: RNCC: 3 | RNVC: 2
CF 482 249 A: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-12-358-6809
Mounting Bracket

123586809
2719-305000.010.0: RNCC: 2 | RNVC: 2
2719-305000.010.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-388-0790
Section Block Clamp

123880790
10124-207000.002.0: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-349-8207
Dust And Moisture Seal Protective Plug

123498207
46 63 1 453 058: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-334-9492
T Plate

123349492
4102612038: RNCC: 3 | RNVC: 2
4102012038: RNCC: 5 | RNVC: 9

5 Jul 1994

5340-12-389-0678
Retaining Strap

123890678
B.AKA1.3331.11: RNCC: 2 | RNVC: 2
B.AKA1.3331.11: RNCC: 3 | RNVC: 2
306B.AKA1.3331.11: RNCC: 5 | RNVC: 2
306B.AKA1.3331.11: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-184-9968
Nonmetallic Bumper

121849968
CF449261A: RNCC: 3 | RNVC: 2
CF 449 261 A: RNCC: 5 | RNVC: 2
CF449261A: RNCC: 5 | RNVC: 2
CF 449 261 A: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-358-6957
Access Cover

123586957
2500262-733300.001.0: RNCC: 2 | RNVC: 2
2500262-733300.001.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-328-8762
Angle Bracket

123288762
2300232-820640.000.0: RNCC: 2 | RNVC: 2
2300232-820640.000.0: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-337-8883
Mounting Bracket

123378883
460 820 09 14: RNCC: 3 | RNVC: 2
S 721 1 85 437 2: RNCC: 3 | RNVC: 9
4608200914: RNCC: 5 | RNVC: 2

28 Apr 1995

5340-12-323-9533
Pad Eye

123239533
CF 842 071 A: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-349-8062
Handle Grip

123498062
32 72 2 310 823: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-323-5768
Rod End Clevis

123235768
5200.111.470.000.3: RNCC: 3 | RNVC: 9
5200111470000: RNCC: 5 | RNVC: 9

10 Dec 1990

5340-12-306-0692
Mending Plate

123060692
5801984-983000.001.0: RNCC: 2 | RNVC: 2
5801984-983000.001.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-365-3745
Mounting Bracket

123653745
2500267-730203.005.0: RNCC: 2 | RNVC: 2
2500267-730203.005.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-319-2125
Access Cover

123192125
6530.004.4: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-377-3211
Access Cover

123773211
01267-1: RNCC: 3 | RNVC: 2

8 Jan 2009

5340-12-311-8659
Dust And Moisture Seal Protective Cap

123118659
3900021901: RNCC: 3 | RNVC: 2
1-3900001390: RNCC: 5 | RNVC: 2

26 Oct 1987

5340-12-174-7142
Retaining Strap

121747142
65-7058-740-04: RNCC: 3 | RNVC: 2

25 Jul 1978

5340-12-381-0387
Bumper

123810387
5.767-005.0: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-191-6022
Escutcheon Plate

121916022
8-2801.08: RNCC: 2 | RNVC: 2
8-2801.08: RNCC: 3 | RNVC: 2
8-2801.08: RNCC: 3 | RNVC: 2
8-2801.08: RNCC: 5 | RNVC: 9
8-2853-04: RNCC: 5 | RNVC: 9
8-2853-04: RNCC: 5 | RNVC: 9
8-2853.04: RNCC: 5 | RNVC: 9
8-2853.04: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-701-5938
Mounting Plate

127015938
VG95211-ML-127015938: RNCC: 2 | RNVC: 2
5.12.6501.1254.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-8528
Rod End Clevis

123008528
1300062-180000.06: RNCC: 2 | RNVC: 2
7835168: RNCC: 3 | RNVC: 2
7835-168: RNCC: 5 | RNVC: 2

5 Sep 1984

5340-12-357-5344
Mounting Bracket

123575344
2500266-194530.000.0: RNCC: 2 | RNVC: 2
2500266-194530.000.0: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-315-5016
Nonmetallic Bumper

123155016
342 2967: RNCC: 3 | RNVC: 2
342 2967 E 5098-13: RNCC: 5 | RNVC: 2

29 Oct 1988

5340-12-340-8448
Nonmetallic Bumper

123408448
183072311: RNCC: 2 | RNVC: 2
183072311: RNCC: 3 | RNVC: 2
E183072311: RNCC: 5 | RNVC: 2

21 Jun 1996

5340-12-025-5117

5340-12-381-5859
Liquid Holding Unit Filler Neck

123815859
310901001H: RNCC: 3 | RNVC: 2

8 Mar 2010

5340-12-326-1381
Mending Plate

123261381
272.359.032: RNCC: 3 | RNVC: 2
272.359 032: RNCC: 5 | RNVC: 9

12 Aug 1991

5340-12-317-1810
Mounting Bracket

123171810
4606400351: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-325-7106
Plain Solid Disk

123257106
5501740052: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-043-2681

5340-12-357-1022
Loop Clamp

123571022
EN4114F20NH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-311-5180
Dust And Moisture Seal Protective Cap

123115180
PAN3863T04: RNCC: 3 | RNVC: 2

11 Sep 1987

5340-12-389-1650
Handle Grip

123891650
0430 9725: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-373-3416
Nonmetallic Bumper

123733416
4617210014: RNCC: 3 | RNVC: 2
461 721 00 14: RNCC: 5 | RNVC: 2
A4617210014: RNCC: 5 | RNVC: 9

24 Oct 2007

5340-12-385-7261
Angle Bracket

123857261
4000009501: RNCC: 3 | RNVC: 2

4 Jul 2011

5340-12-333-4723
Resilient Mount

123334723
786021S9WEICH: RNCC: 3 | RNVC: 2
0009889510: RNCC: 5 | RNVC: 2
0009889510: RNCC: 5 | RNVC: 2

21 Dec 1993

5340-12-179-4916
Strap Fastener Loop

121794916
183813768: RNCC: 3 | RNVC: 2

2 Jul 1979

5340-12-374-2205
Access Cover

123742205
3123611: RNCC: 3 | RNVC: 2

30 Jan 2008

5340-12-379-6954
Clamping Catch

123796954
407-7442: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-12-358-9204
Angle Bracket

123589204
3852952140: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-394-0322
Angle Bracket

123940322
105-894066.12: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-321-9112
Nonmetallic Bumper

123219112
100.370: RNCC: 2 | RNVC: 2
100.370: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-304-5738
Plug Button

123045738
123005: RNCC: 3 | RNVC: 2
123005: RNCC: 5 | RNVC: 2
123005: RNCC: 5 | RNVC: 9

1 Aug 1985

5340-12-384-0210
Genera Guide Rail

123840210
BG005: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-12-180-9137
Clamping Catch

121809137
81669255011: RNCC: 3 | RNVC: 2

11 Oct 1979

5340-12-359-8481
Dust And Moisture Seal Protective Cap-Plug

123598481
610U17RAL3000: RNCC: 3 | RNVC: 2
GPN610-U17RAL3000: RNCC: 5 | RNVC: 9
610U17ROT: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-326-3788
Strap Hinge

123263788
1490-5270.06: RNCC: 3 | RNVC: 2
1490-5270.06: RNCC: 5 | RNVC: 2

9 Sep 1991

5340-12-308-5516
Loop Clamp

123085516
2705701: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-12-145-9283

5340-12-305-1782

5340-12-331-8307
Loop Clamp

123318307
HBD.A7.060.0020.0XV453: RNCC: 3 | RNVC: 2
HBD A7 060 0020 0 XV453: RNCC: 5 | RNVC: 2

24 Jun 1993

5340-12-359-6872
Mounting Bracket

123596872
9454291240: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-349-6247
Loop Clamp

123496247
2024GR: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-12-317-7332
Angle Bracket

123177332
3794801: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-090-5510

5340-12-341-6512
Mounting Plate

123416512
03644600: RNCC: 3 | RNVC: 2
03644600.503: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-382-8552
Mounting Bracket

123828552
SW4031G048: RNCC: 3 | RNVC: 2

17 Aug 2010

5340-12-122-2210

5340-12-324-7081
Bridge Clamp

123247081
52820-W10.05: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-326-6084
Access Cover

123266084
00935520: RNCC: 3 | RNVC: 2
00935520.530: RNCC: 5 | RNVC: 2

14 Oct 1991

5340-12-310-0932
Hand- Kurbel

5340-12-360-0181
Butt Hinge

123600181
1039-U13: RNCC: 3 | RNVC: 2

28 Mar 2003

5340-12-309-9339
Mending Plate

123099339
3875531340: RNCC: 3 | RNVC: 2

20 Mar 1987

5340-12-314-2063
Angle Bracket

123142063
272.1768.212: RNCC: 2 | RNVC: 2
272.1768.212: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-122-2970
Loop Clamp

121222970
3159955044: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-363-5055
Rod End Clevis

123635055
085740: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-024-1013

5340-12-175-8394
Retaining Strap

121758394
06670630217: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-353-6514
Dust And Moisture Seal Protective Plug

123536514
300V5: RNCC: 3 | RNVC: 2
GPN 300-V 5: RNCC: 5 | RNVC: 9

23 Apr 2001

5340-12-318-0010
Mending Plate

123180010
81415010257: RNCC: 3 | RNVC: 2
81.41501.0257: RNCC: 5 | RNVC: 2

2 Jun 1989

5340-12-359-3206
Mending Plate

123593206
33177650081: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-180-4509
Double Angle Bracket

121804509
4254100026: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-327-5005
Mounting Bracket

123275005
6887660: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-368-2349
Rod End Clevis

123682349
000000.296728: RNCC: 3 | RNVC: 2
47.9990.6026: RNCC: 5 | RNVC: 2

12 Jan 2006

5340-12-374-5766
Seal Retaining Plate

123745766
353 8276-801: RNCC: 3 | RNVC: 2
353 8276-801: RNCC: 5 | RNVC: 2

27 Feb 2008

5340-12-366-5628
Mounting Bracket

123665628
2 0073-393: RNCC: 3 | RNVC: 2
2 0073-393: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-388-7896
Elastic Strap

123887896
10199-186420.000.0: RNCC: 2 | RNVC: 2
10199-186420.000.0: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-302-7870
Mending Plate

123027870
CF 493 361 A: RNCC: 3 | RNVC: 2
CF 493 361 A: RNCC: 3 | RNVC: 2
CF 493 361: RNCC: 5 | RNVC: 2
CF 493 361: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-195-8951
Nonmetallic Bumper

121958951
2-89VG85529: RNCC: 2 | RNVC: 2

28 Apr 1983

5340-12-300-0063
Mending Plate

123000063
5801998-663210.06: RNCC: 2 | RNVC: 2
5801998-663210.06: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-360-4098
Manual Control Lever

123604098
0009025189: RNCC: 3 | RNVC: 2
0009025189: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-169-7811
Retaining Strap

121697811
06671500101: RNCC: 3 | RNVC: 2
6MAN217: RNCC: 5 | RNVC: 2

10 Jun 1977

5340-12-180-8992
Platte

121808992
100234: RNCC: 3 | RNVC: 2

11 Oct 1979

5340-12-314-1250
Angle Bracket

123141250
6205401173: RNCC: 3 | RNVC: 2
620 540 11 73: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-300-7443

5340-12-386-0431
Flush Lock

123860431
60004568: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-141-6241
Dust And Moisture Seal Protective Cap

121416241
0960134000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-163-7414
Loop Clamp

121637414
LN9491B12: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-377-5387
Retaining Strap

123775387
41011718: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-12-324-5289
Metal Runner

123245289
9029539: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-12-363-6238
Angle Bracket

123636238
ATF4900830: RNCC: 3 | RNVC: 2

9 Jul 2004

5340-12-336-7082
Handle Grip

123367082
M33134: RNCC: 3 | RNVC: 2
M33134: RNCC: 5 | RNVC: 9

12 Dec 1994

5340-12-343-2785
Protection Bellows

123432785
0004907865: RNCC: 3 | RNVC: 2

28 May 1997

5340-12-357-0252
Permanent Magnet

123570252
2394989310: RNCC: 3 | RNVC: 2

25 Apr 2002

5340-12-026-0747

5340-12-025-3201

5340-12-386-0466
Dust And Moisture Seal Protective Plug

123860466
255/48: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-377-3071
Liquid Holding Unit Filler Neck

123773071
056992: RNCC: 3 | RNVC: 2

7 Jan 2009

5340-12-393-2548
Mounting Bracket

123932548
2321454000: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-12-392-4339
Bumper

123924339
9493220044: RNCC: 3 | RNVC: 2

7 Jun 2013

5340-12-320-5552
Resilient Mount

123205552
811412323D: RNCC: 3 | RNVC: 9

24 Jan 1990

5340-12-360-3725
Dust And Moisture Seal Protective Cap

123603725
0009625035: RNCC: 3 | RNVC: 2
0009625035: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-392-4102
Spring Loaded Cylinder Fastener

123924102
22120.0205: RNCC: 3 | RNVC: 2
EH2212.205: RNCC: 5 | RNVC: 9
2212.205: RNCC: 5 | RNVC: 9

5 Jun 2013

5340-12-303-8544
Loop Clamp

123038544
4922 25013: RNCC: 3 | RNVC: 2

9 May 1985

5340-12-348-6793
Support Hook

123486793
1649801: RNCC: 2 | RNVC: 2
1649801: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-351-5050
Nonmetallic Bumper

123515050
4616980197: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-194-5110
Mending Plate

121945110
SM518: RNCC: 3 | RNVC: 2

10 Nov 1982

5340-12-188-0621
Retaining Strap

121880621
056013709: RNCC: 3 | RNVC: 2

1 Jun 1981

5340-12-011-4909

5340-12-327-6315
Angle Bracket

123276315
09.211.00.010: RNCC: 3 | RNVC: 2

11 Feb 1992

5340-12-094-6303

5340-12-329-5885
Mounting Bracket

123295885
158177: RNCC: 2 | RNVC: 2
158177: RNCC: 3 | RNVC: 2
158177: RNCC: 3 | RNVC: 2
158177: RNCC: 5 | RNVC: 9

4 Sep 1992

5340-12-370-1520
Rod End Clevis

123701520
189105905: RNCC: 2 | RNVC: 2
189105905: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-391-4883
Snap Hook

123914883
740.430-BLACK: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-043-5451

5340-12-352-3154
Loop Clamp

123523154
5559780: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-12-351-8497
Angle Bracket

123518497
5400051-773212.00: RNCC: 2 | RNVC: 2
5400051-773212.00: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-12-374-3359
Mechanical Stop

123743359
2006873: RNCC: 3 | RNVC: 2

8 Feb 2008

5340-12-334-9369
Mounting Bracket

123349369
1000042-195230: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-12-167-3281
Mending Plate

121673281
CF 414 710: RNCC: 2 | RNVC: 2
CF 414 710: RNCC: 3 | RNVC: 2
CF414710: RNCC: 5 | RNVC: 2
CF 414 710: RNCC: 5 | RNVC: 2
CF 414 710: RNCC: 5 | RNVC: 2
CF414710: RNCC: 5 | RNVC: 2
CF414710: RNCC: 5 | RNVC: 2

14 Dec 1976

5340-12-143-4856

5340-12-364-2623
Double Angle Bracket

123642623
4055411340: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-149-1031
Loop Clamp

121491031
28201870284: RNCC: 3 | RNVC: 2
8201870284: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-2816
Retaining Clip

123482816
874 297 44: RNCC: 3 | RNVC: 2

21 May 1999

5340-12-379-9479
Mounting Bracket

123799479
96500036: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-394-1495
Dust And Moisture Seal Protective Cap

123941495
CTP40490P008: RNCC: 3 | RNVC: 2

7 Nov 2013

5340-12-384-1316
Mounting Bracket

123841316
12.51.04: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-12-356-7677
Rod Retainer Clip

123567677
0009943760: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-361-1519
Double Angle Bracket

123611519
187474904: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-12-177-9979
Spring Tension Clip

121779979
02197: RNCC: 3 | RNVC: 2
02197: RNCC: 5 | RNVC: 9

13 Mar 1979

5340-12-092-3439

5340-12-139-3538

5340-12-355-1432
Multiple Angle Bracket

123551432
4604901740: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-314-1620
Retaining Strap

123141620
0009950368: RNCC: 3 | RNVC: 2
000 995 03 68: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-322-6580
Flare Lock Fastener

123226580
281853695B: RNCC: 3 | RNVC: 2
281.853.695B: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-386-7487
Mounting Bracket

123867487
T251M4923101: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-382-4613
Loop Clamp

123824613
806277183: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-12-010-2335

5340-12-042-5746

5340-12-199-4133
Nonmetallic Bumper

121994133
3093200644: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-041-5718

5340-12-370-8722
Webbing Strap

123708722
01-300 02503: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-12-383-9267
Mounting Plate

123839267
314133400000: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-12-345-4815
Helical Compression Spring Seat

123454815
4723433896: RNCC: 3 | RNVC: 2
472.343.38.96: RNCC: 5 | RNVC: 2

24 Mar 1998

5340-12-338-2611
Catch Strike

123382611
1429L9-1BP: RNCC: 3 | RNVC: 2

13 Jun 1995

5340-12-365-1773
Clamping Catch

123651773
8451171151: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-313-6474
Elbow Catch

123136474
HA22111: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-349-8838
Angle Bracket

123498838
54.1038.035.37: RNCC: 2 | RNVC: 2
54.1038.035.37: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-381-2829
Loop Clamp

123812829
RAN006X: RNCC: 3 | RNVC: 2
1516847: RNCC: 5 | RNVC: 2
15013646: RNCC: 5 | RNVC: 2
RAN006X: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-12-319-4179
Shimmy Damper

123194179
082996: RNCC: 3 | RNVC: 2

29 Sep 1989

5340-12-136-5234

5340-12-041-8681

5340-12-346-6071
Manual Control Lever

123466071
KM2401522: RNCC: 3 | RNVC: 2
KM 240.1522: RNCC: 5 | RNVC: 2

17 Aug 1998

5340-12-362-6542
Electronic Equipment Hardware Kit

123626542
2319224000: RNCC: 3 | RNVC: 2

16 Mar 2004

5340-12-027-5703

5340-12-343-1906
Casement Fastener

123431906
9843 6401: RNCC: 3 | RNVC: 2
98436401: RNCC: 5 | RNVC: 2

15 May 1997

5340-12-360-0621
Butt Hinge

123600621
9417200837: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-12-307-7018
Headless Straight Rod

123077018
RP988975: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-334-4168
Access Cover

123344168
RU51901: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-360-9331
Mounting Bracket

123609331
12669601: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-334-8802
Helical Compression Spring Seat

123348802
F6374274: RNCC: 3 | RNVC: 2
F6 374274: RNCC: 5 | RNVC: 2
F607530374274: RNCC: 5 | RNVC: 9

30 Jun 1994

5340-12-360-4766
Mounting Plate

123604766
72080109: RNCC: 3 | RNVC: 2
72080109: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-354-3092
Dust And Moisture Seal Protective Plug

123543092
700088025000: RNCC: 3 | RNVC: 2
25MMN88: RNCC: 5 | RNVC: 2

29 Jun 2001

5340-12-357-5277
Retaining Clip

123575277
4205631Z01: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-356-7288
Angle Bracket

123567288
5802375440: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-12-306-0127
Double Angle Bracket

123060127
2499801: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-359-5977
Manual Control Handle

123595977
7891.00.04: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-314-4016
Angle Bracket

123144016
272.315 312: RNCC: 2 | RNVC: 2
272.315.312: RNCC: 3 | RNVC: 2
272.315 312: RNCC: 5 | RNVC: 9

2 Jul 1988

5340-12-387-1412
Mounting Bracket

123871412
5262000140: RNCC: 3 | RNVC: 2

9 Nov 2011

5340-12-300-6749
Mending Plate

123006749
4355450082: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-312-8325
Pad Eye

123128325
1173801: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-12-381-2256
Snap Hook

123812256
H-029: RNCC: 3 | RNVC: 2

22 Jan 2010

5340-12-321-2576
Webbing Strap

123212576
81968024024: RNCC: 3 | RNVC: 2
81.96802.4024: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-12-390-8051
Section Block Clamp

123908051
7073140: RNCC: 3 | RNVC: 2

13 Dec 2012

5340-12-310-4270
Angle Bracket

123104270
3824521013: RNCC: 3 | RNVC: 2
38245 21013: RNCC: 5 | RNVC: 9

21 May 1987

5340-12-322-3338
Angle Bracket

123223338
6170760535: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-344-0114
Handwheel

123440114
2996.11.94: RNCC: 3 | RNVC: 2
2996.1194: RNCC: 5 | RNVC: 2

28 Aug 1997

5340-12-351-3847
Mechanical Stop

123513847
10063-500000.06: RNCC: 3 | RNVC: 2
10063-500000.06: RNCC: 5 | RNVC: 9

20 Jul 2000

5340-12-326-5394
Electrical-Mechanical Equipment Post

123265394
1666299: RNCC: 3 | RNVC: 2
934.63219: RNCC: 5 | RNVC: 2
1666299: RNCC: 5 | RNVC: 2
00.934.63219.000: RNCC: 5 | RNVC: 2
065.151.11.00.00: RNCC: 5 | RNVC: 2

2 Oct 1991

5340-12-198-8863
Angle Bracket

121988863
8370920340: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-313-8102
Angle Bracket

123138102
3874297240: RNCC: 3 | RNVC: 2
387 429 72 40: RNCC: 5 | RNVC: 2

7 May 1988

5340-12-377-3728
Dust And Moisture Seal Protective Plug

123773728
0009870315: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-308-9121
Plain Solid Disk

123089121
4463 341 034: RNCC: 3 | RNVC: 2
4463341034: RNCC: 5 | RNVC: 2
2258040: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-342-2772
Resilient Mount

123422772
1202-3A: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-12-325-3990
Double Angle Bracket

123253990
525461016: RNCC: 3 | RNVC: 2
52 546 1016: RNCC: 5 | RNVC: 2

3 Jun 1991

5340-12-359-7340
Mounting Bracket

123597340
S281M3043101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-367-9216
Spring Holder

123679216
215844: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-12-094-0945

5340-12-387-9403
Dust And Moisture Seal Protective Cap

123879403
4000002772: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-367-3914
Nonmetallic Bumper

123673914
001748257001: RNCC: 3 | RNVC: 2
93163020: RNCC: 5 | RNVC: 2
1748257001: RNCC: 5 | RNVC: 2

15 Aug 2005

5340-12-322-9996
Elbow Catch

123229996
6731269: RNCC: 3 | RNVC: 2
6731269: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-12-355-7837
Plain Solid Disk

123557837
105-46631.28: RNCC: 3 | RNVC: 2

13 Dec 2001

5340-12-377-0746
Cushioning Pad

123770746
1030027-972060.002.0: RNCC: 3 | RNVC: 2
1030027-972060.002.0: RNCC: 5 | RNVC: 2

11 Dec 2008

5340-12-363-1139
Spring Loaded Cylinder Fastener

123631139
GN617-5-A-NI: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-370-7207
Eye Hook

123707207
10-222A/2: RNCC: 3 | RNVC: 2

13 Dec 2006

5340-12-300-0680
Ball Socket Seat

123000680
422301-1.8: RNCC: 3 | RNVC: 2
0008110072: RNCC: 5 | RNVC: 2
157400: RNCC: 5 | RNVC: 2

29 Jun 1984

5340-12-341-8516
Catch Strike

123418516
049129357: RNCC: 3 | RNVC: 2
K35085-1: RNCC: 5 | RNVC: 2

5 Nov 1996

5340-12-158-7036
Helical Compression Spring Seat

121587036
436314: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-190-3123
Retaining Strap

121903123
0159096: RNCC: 3 | RNVC: 2
DZ0159096: RNCC: 5 | RNVC: 2
ZBS59100: RNCC: 5 | RNVC: 2

19 Nov 1981

5340-12-372-8124
Nonmetallic Bumper

123728124
6100 GI 70 SHORE: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-12-352-0502
Spacing Threaded Standoff

123520502
CBD45301P05: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-323-4793
Webbing Strap

123234793
KK15690: RNCC: 3 | RNVC: 9
KK15690ZURRGURT-TEIL1: RNCC: 5 | RNVC: 9

29 Nov 1990

5340-12-347-9945
Dust And Moisture Seal Protective Cap

123479945
211415109A: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-12-329-1991
Angle Bracket

123291991
2300248-70000.12: RNCC: 2 | RNVC: 2
2300248-70000.12: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-12-348-6144
Mounting Bracket

123486144
NN31142G01: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-12-302-0386
Hinge Torsion Bar

123020386
3819770018: RNCC: 3 | RNVC: 2

28 Nov 1984

5340-12-329-3101

5340-12-388-0053
Mounting Bracket

123880053
7093675: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-389-4942
Electromagnetic Lock

123894942
DL1L-EX-X20(ANSO).10: RNCC: 3 | RNVC: 2

13 Jul 2012

5340-12-333-4833
Retaining Bail

123334833
391741: RNCC: 3 | RNVC: 2

22 Dec 1993

5340-12-376-1899
Rigid Caster

123761899
3478DPR200P63: RNCC: 3 | RNVC: 2
4031582306309: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-12-024-0701

5340-12-301-6078
Angle Bracket

123016078
2300107-310500.12: RNCC: 2 | RNVC: 2
2300107-310500.12: RNCC: 3 | RNVC: 2
2300107-310500.12: RNCC: 5 | RNVC: 9
2300107-310500.12: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-130-1154

5340-12-315-3014
Angle Bracket

123153014
6204296340: RNCC: 3 | RNVC: 2
620 429 63 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-196-2653
Pad Eye

121962653
03569200: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-143-2031
Handrad

5340-12-143-7737
Daempfungslagerung

5340-12-141-5292
Blatt- Feder

5340-12-161-9909
Einbau- Schlosz

5340-12-183-8128
Support Hook

121838128
111857723A: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-373-6593
Mounting Bracket

123736593
X00011523: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-12-340-7917
Turnbuckle Body

123407917
23182-7001.03: RNCC: 2 | RNVC: 2
23182-7001.03: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-12-161-6711
Extension Handle

121616711
100332-11210: RNCC: 2 | RNVC: 2
100332-11210: RNCC: 5 | RNVC: 2
100332-11210: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-0213
Double Angle Bracket

123650213
5160-545000A01B: RNCC: 2 | RNVC: 2
5160-545000A01B: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-356-4989
Dust And Moisture Seal Protective Plug

123564989
735M33X2: RNCC: 3 | RNVC: 2
909735147: RNCC: 5 | RNVC: 2
GPN735-M33X2: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-349-8727
Mounting Plate

123498727
A1Z10283946: RNCC: 2 | RNVC: 2
A1Z10283946: RNCC: 3 | RNVC: 2
20361792: RNCC: 5 | RNVC: 2

19 Jan 2000

5340-12-327-2147
Door Handle

123272147
1000227-2000.03: RNCC: 2 | RNVC: 2
1000227-2000.03: RNCC: 3 | RNVC: 2

17 Dec 1991

5340-12-325-1799
Mounting Bracket

123251799
54.0024.768.00: RNCC: 2 | RNVC: 2
54.0024.768.00: RNCC: 3 | RNVC: 2

14 May 1991

5340-12-196-2148
Dust And Moisture Seal Protective Plug

121962148
4069875044: RNCC: 3 | RNVC: 2

13 Jun 1983

5340-12-169-9652
Double Angle Bracket

121699652
101252501: RNCC: 3 | RNVC: 2

15 Jun 1977

5340-12-302-0846
Catch Strike

123020846
3817520141: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-344-8642
Multiple Angle Bracket

123448642
5803514-663120.03: RNCC: 2 | RNVC: 2
55.0205.341.03: RNCC: 3 | RNVC: 2
5803514-663120.03: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-301-2409
Angle Bracket

123012409
4179210: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-091-2891

5340-12-363-5212
Spring Tension Clip

123635212
6H0881635: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-197-2223
Double Angle Bracket

121972223
075-103022-422: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-337-4268
Escutcheon Plate

123374268
0974853: RNCC: 3 | RNVC: 2
974853: RNCC: 5 | RNVC: 2
0974853: RNCC: 5 | RNVC: 2

2 Mar 1995

5340-12-174-2893
Pipe Bracket

121742893
1G0056: RNCC: 3 | RNVC: 2
4255060040: RNCC: 5 | RNVC: 2

21 Jun 1978

5340-12-092-4424

5340-12-168-9873
Dust And Moisture Seal Protective Cap

121689873
25014209: RNCC: 3 | RNVC: 2
974634001: RNCC: 5 | RNVC: 2
974634001: RNCC: 5 | RNVC: 9
974634001: RNCC: 5 | RNVC: 9

13 Apr 1977

5340-12-022-0891

5340-12-022-3138

5340-12-337-7748
Angle Bracket

123377748
201263: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-311-7899
Manual Control Handle

123117899
52.3108.196.00: RNCC: 2 | RNVC: 2
52.3108.196.00: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-12-387-4330
Clamping Catch

123874330
10014533: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-12-393-6430
Section Block Clamp

123936430
06.67690-0661: RNCC: 3 | RNVC: 2
06.67690-0661: RNCC: 5 | RNVC: 2

30 Sep 2013

5340-12-175-8796
Retaining Strap

121758796
3098990061: RNCC: 3 | RNVC: 2

25 Oct 1978

5340-12-184-8532
Loop Clamp

121848532
5429875: RNCC: 3 | RNVC: 2

23 Aug 1980

5340-12-370-3176
Mounting Bracket

123703176
130 7861: RNCC: 3 | RNVC: 2

25 Oct 2006

5340-12-301-2847
Double Angle Bracket

123012847
2300106-240400.04: RNCC: 2 | RNVC: 2
2300106-240400.04: RNCC: 3 | RNVC: 2
2300106-240400.04: RNCC: 5 | RNVC: 9
2300106-240400.04: RNCC: 5 | RNVC: 9

5 Oct 1984

5340-12-043-3114

5340-12-042-0929

5340-12-321-6488
Coat And Hat Hook

123216488
1137901: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-122-5505
Retaining Strap

121225505
4043310040: RNCC: 3 | RNVC: 2
012010120900: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-347-2944
Webbing Strap

123472944
020050.1300.025: RNCC: 2 | RNVC: 2

24 Nov 1998

5340-12-094-6540

5340-12-350-4225
Dust And Moisture Seal Boot

123504225
RC003201: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-359-7892
Angle Bracket

123597892
2500261-180330.001.0: RNCC: 2 | RNVC: 2
2500261-180330.001.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-390-9492
Access Cover

123909492
598101-180000.005.0: RNCC: 2 | RNVC: 2
598101-180000.005.0: RNCC: 3 | RNVC: 2

9 Jan 2013

5340-12-371-5487
Mounting Bracket

123715487
SK861-060175.000.0: RNCC: 3 | RNVC: 2
1589322: RNCC: 5 | RNVC: 9

17 Apr 2007

5340-12-359-8325
Mounting Bracket

123598325
2500261-180000.209.0: RNCC: 2 | RNVC: 2
2500261-180000.209.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-165-6830
Retaining Strap

121656830
2225409: RNCC: 3 | RNVC: 2
2225-40-9: RNCC: 5 | RNVC: 2

15 Jun 1976

5340-12-701-1557
Mounting Bracket

127011557
VG95211-ML-127011557: RNCC: 2 | RNVC: 2
5.12.0220.1830.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-4201
Angle Bracket

123174201
P-145502-049: RNCC: 3 | RNVC: 2
P145502-049: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-364-6646
Access Door Hinge

123646646
2500262-192900.002.0: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-701-6578
Angle Bracket

127016578
VG95211-ML-127016578: RNCC: 2 | RNVC: 2
5.12.7208.8500.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5226
Mounting Bracket

127015226
VG95211-ML-127015226: RNCC: 2 | RNVC: 2
5.12.6100.8021.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-0130
Webbing Strap

121970130
01803-2-SCHLAUFE-FE480MM-LE630MM: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-1110-480: RNCC: 3 | RNVC: 2
4900059-212076.000.0: RNCC: 3 | RNVC: 2
4900059-212076-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-50X480X630-C1/SCHLAUF: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-308-4306
Angle Bracket

123084306
588.90-200002-001: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-12-316-3903
Retaining Strap

123163903
DIN1592-19ZN: RNCC: 2 | RNVC: 2
DIN1592-19ZN: RNCC: 3 | RNVC: 2
DIN1592-19ZN: RNCC: 3 | RNVC: 2
19DIN1592-A3C: RNCC: 5 | RNVC: 2
DIN1592-19ZN: RNCC: 5 | RNVC: 2
DIN1592-19ZN: RNCC: 5 | RNVC: 2

13 Jan 1989

5340-12-357-6928
Lock-Release Lever

123576928
06450-4102: RNCC: 3 | RNVC: 2
63306: RNCC: 3 | RNVC: 2
NLM06450-4102: RNCC: 5 | RNVC: 2
NLM06450-4102: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-390-5509
Lock-Release Lever

123905509
V6530-12050-101: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-12-311-9916
Mending Plate

123119916
P-875896-003: RNCC: 3 | RNVC: 2
P875896-003: RNCC: 5 | RNVC: 2

9 Nov 1987

5340-12-330-5618
Dust And Moisture Seal Protective Cap

123305618
3909-8: RNCC: 3 | RNVC: 2

11 Jan 1993

5340-12-387-9659
Dust And Moisture Seal Protective Cap

123879659
SKM ZUBS 2 FS: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-12-347-3196
Dust And Moisture Seal Protective Plug

123473196
800M30X1,5: RNCC: 3 | RNVC: 2
GPN800M30X1,5: RNCC: 5 | RNVC: 2
757509: RNCC: 5 | RNVC: 2

26 Nov 1998

5340-12-349-8226
Dust And Moisture Seal Protective Cap

123498226
31 42 2 314 711: RNCC: 3 | RNVC: 2

12 Jan 2000

Load More Results