What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 80 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 80 of 178

5340-12-190-2211
Mending Plate

121902211
1000042-156000.02: RNCC: 3 | RNVC: 2
22853: RNCC: 5 | RNVC: 2

12 Nov 1981

5340-12-348-5797
Shimmy Damper

123485797
701407077A: RNCC: 3 | RNVC: 2
701 407 077A: RNCC: 5 | RNVC: 2

21 Jul 1999

5340-12-350-5878
Dust And Moisture Seal Protective Cap

123505878
14030509: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-12-315-5091
Detent Plunger

123155091
2500-311100.08: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-12-333-1804
Access Cover

123331804
81429025165: RNCC: 2 | RNVC: 2
81429025165: RNCC: 3 | RNVC: 2
81.42902.5165: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-12-333-6513
Webbing Strap

123336513
52.0271.000.18: RNCC: 3 | RNVC: 2

18 Jan 1994

5340-12-361-7847
Flush Catch

123617847
2524: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-367-9692
Nut And Bolt Locking Plate

123679692
5849940030: RNCC: 3 | RNVC: 2

13 Nov 2005

5340-12-150-8477

5340-12-349-7604
Mechanical Stop

123497604
46 54 2 316 315: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-304-5534
Mending Plate

123045534
2989120661: RNCC: 3 | RNVC: 2
2 989 120 661: RNCC: 5 | RNVC: 2

30 Jul 1985

5340-12-301-1957
Mending Plate

123011957
1423-911.30(4): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-369-6435
Mending Plate

123696435
03.001.14.86.0: RNCC: 3 | RNVC: 2
03.001.14.86.0: RNCC: 5 | RNVC: 2

4 Aug 2006

5340-12-196-8514
Nut And Bolt Locking Plate

121968514
YK2152198: RNCC: 3 | RNVC: 2
2152198EZ0174-43: RNCC: 5 | RNVC: 2
0215 2198: RNCC: 5 | RNVC: 9
2152198: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-12-308-2897
Angle Bracket

123082897
5802017-701410.00: RNCC: 2 | RNVC: 2
5802017-701410.00: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-370-9492
Retaining Strap

123709492
640310: RNCC: 3 | RNVC: 2

19 Jan 2007

5340-12-309-1425
Access Cover

123091425
5802017-710545.00: RNCC: 2 | RNVC: 2
7801761500: RNCC: 3 | RNVC: 2
78017 61500: RNCC: 5 | RNVC: 9

17 Dec 1986

5340-12-182-9995
Handle Grip

121829995
0020223: RNCC: 3 | RNVC: 2
20223-43394: RNCC: 5 | RNVC: 2

13 Mar 1980

5340-12-310-6216
Loop Clamp

123106216
52.0259.222.01: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-344-0170
Angle Bracket

123440170
2996.73.43: RNCC: 3 | RNVC: 2
2996.7343: RNCC: 5 | RNVC: 2

29 Aug 1997

5340-12-356-0917
Spring Tension Clip

123560917
0009952920: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-343-8902
Access Cover

123438902
160-25541-46: RNCC: 3 | RNVC: 2
160-25541-46: RNCC: 5 | RNVC: 9

11 Aug 1997

5340-12-367-4255
Mending Plate

123674255
181080341: RNCC: 2 | RNVC: 2
181080341: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-12-328-6274
Hand Crank

123286274
1350.11.49.00: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-376-4653
Universal Adjustable Chock

123764653
03085581: RNCC: 3 | RNVC: 2

2 Oct 2008

5340-12-313-8677
Dust And Moisture Seal Protective Cap

123138677
3169970135: RNCC: 3 | RNVC: 2
316 997 01 35: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-362-1586
Air Inlet-Outlet Frame

123621586
52116: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-041-2340

5340-12-166-0136
Nonmetallic Bumper

121660136
03024: RNCC: 3 | RNVC: 2
03024: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-159-1484
Electrical-Mechanical Equipment Post

121591484
AWRSEND6A31: RNCC: 3 | RNVC: 2
AWRSEND6A31: RNCC: 5 | RNVC: 2
AWRSEND6A31: RNCC: 5 | RNVC: 2
AWRSEND6A31: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-331-4739
Resilient Mount

123314739
6706820169: RNCC: 3 | RNVC: 9

7 May 1993

5340-12-300-9737
Nonmetallic Bumper

123009737
162230203: RNCC: 3 | RNVC: 2
0019877440: RNCC: 5 | RNVC: 2

14 Sep 1984

5340-12-157-7002

5340-12-315-3054
Access Cover

123153054
3224620023: RNCC: 3 | RNVC: 2
322 462 00 23: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-128-4602

5340-12-199-4822
Retaining Strap

121994822
7801850035: RNCC: 3 | RNVC: 2
78018 50035: RNCC: 5 | RNVC: 9

1 May 1984

5340-12-182-9756
Loop Clamp

121829756
JJ51253: RNCC: 3 | RNVC: 2

11 Mar 1980

5340-12-361-0768
Runner

123610768
A1Z10294619: RNCC: 2 | RNVC: 2
A1Z10294619: RNCC: 3 | RNVC: 2
10294619: RNCC: 5 | RNVC: 2

19 Aug 2003

5340-12-180-2887
Pad Eye

121802887
3833150232: RNCC: 3 | RNVC: 2

31 Aug 1979

5340-12-373-0000
Handle Grip

123730000
04762861: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-12-145-1593

5340-12-380-9087
Angle Bracket

123809087
5601750341: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-12-372-9958
Bow Handle

123729958
2519: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-12-172-0944
Strap Bolt

121720944
300-90X16: RNCC: 3 | RNVC: 2

19 Dec 1977

5340-12-362-9782
Mounting Bracket

123629782
2300042-992811.000: RNCC: 2 | RNVC: 2
2300042-992811.000: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-360-7091
Mounting Bracket

123607091
000611-216100.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-190-8232
Loop Clamp

121908232
DIN3015-S-A-2-R-21,3-PP-W1: RNCC: 2 | RNVC: 2
HRS2S21,3PP STMBL: RNCC: 3 | RNVC: 2
RCPR1-221,3: RNCC: 3 | RNVC: 2
SPAL4021,3PP-DPAL-AS: RNCC: 3 | RNVC: 2
RCP1-221,3: RNCC: 5 | RNVC: 2
RCPR1-221,3: RNCC: 5 | RNVC: 2
HRS2S21,3PP ST BL: RNCC: 5 | RNVC: 2
DIN3015-SA2R-21,3PP-W1: RNCC: 5 | RNVC: 2
HRZS-21,3.1/1: RNCC: 5 | RNVC: 2
RCP1-221,3: RNCC: 5 | RNVC: 2

16 Dec 1981

5340-12-703-2013
Rod End Clevis

127032013
VG95211-ML-127032013: RNCC: 2 | RNVC: 2
5.12.5101.4855.01: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-318-7331
Mending Plate

123187331
704-123110-907-0: RNCC: 3 | RNVC: 2

11 Aug 1989

5340-12-185-0018
Angle Bracket

121850018
F01-240130-04-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-180-6267
Dust And Moisture Seal Protective Cap

121806267
910.161: RNCC: 3 | RNVC: 2
42483765: RNCC: 5 | RNVC: 2
42483765EY5505-76: RNCC: 5 | RNVC: 2
E 188257401: RNCC: 5 | RNVC: 2
0644253: RNCC: 5 | RNVC: 2
910161: RNCC: 5 | RNVC: 2
188257401: RNCC: 5 | RNVC: 2
644253: RNCC: 5 | RNVC: 9

24 Sep 1979

5340-12-319-1497
Mounting Bracket

123191497
NO PRIMARY REF 12-319-1497: RNCC: 3 | RNVC: 2
LM-2882POS49: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-12-174-6714
Case Corner

121746714
DIN7469-A45ZN: RNCC: 2 | RNVC: 2
A45DIN7469GALZN9: RNCC: 5 | RNVC: 2
A45DIN7469STGALZN9: RNCC: 5 | RNVC: 2
A45DIN7469VERZINKT: RNCC: 5 | RNVC: 2

19 Jul 1978

5340-12-701-7918
Mounting Plate

127017918
VG95211-ML-127017918: RNCC: 2 | RNVC: 2
5.12.7904.0520.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-8403
Retaining Strap

123398403
1.8510-11: RNCC: 3 | RNVC: 2
965011039: RNCC: 5 | RNVC: 9
1.5011-39: RNCC: 5 | RNVC: 9

23 Jan 1996

5340-12-318-0988
Access Cover

123180988
140-133200-902-0: RNCC: 3 | RNVC: 2
66742-625: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-179-1787
Multiple Angle Bracket

121791787
5801113-111120: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-387-1686
Manual Control Handle

123871686
0021-3525-000: RNCC: 3 | RNVC: 2

11 Nov 2011

5340-12-353-0261
Access Cover

123530261
272.402.117: RNCC: 3 | RNVC: 2
272-402-117: RNCC: 5 | RNVC: 2

22 Jan 2001

5340-12-318-9948
Handle Grip

123189948
2654-336 221.03: RNCC: 2 | RNVC: 2
679-08020201.03: RNCC: 3 | RNVC: 2
679-08020201.03: RNCC: 5 | RNVC: 9

30 Aug 1989

5340-12-323-1157
Access Cover

123231157
4502401: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-12-187-5051
Helical Compression Spring Seat

121875051
JJ52769: RNCC: 3 | RNVC: 2

10 Apr 1981

5340-12-326-2198
Access Cover

123262198
3731801JL03H: RNCC: 3 | RNVC: 2

19 Aug 1991

5340-12-360-0029
Mounting Bracket

123600029
9414304357: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-326-3509
Access Cover

123263509
5255330136: RNCC: 2 | RNVC: 2
5255330136: RNCC: 3 | RNVC: 2

4 Sep 1991

5340-12-199-2772
Dust And Moisture Seal Protective Cap

121992772
114L31705: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-193-8777
Grooved Clamp Coupling

121938777
160-634050: RNCC: 3 | RNVC: 2
160-634050: RNCC: 5 | RNVC: 9

8 Sep 1982

5340-12-328-5613
Mending Plate

123285613
52.3108.190.57: RNCC: 2 | RNVC: 2
52.3108.190.57: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-12-319-6424
Retaining Strap

123196424
347911: RNCC: 3 | RNVC: 2

20 Oct 1989

5340-12-130-1984

5340-12-180-0466
Resilient Mount

121800466
3142230112: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-300-3116
Butt Hinge

123003116
3097402337: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-375-0158
Spring Tension Clip

123750158
S259M8057237: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-12-157-9981
Resilient Mount

121579981
009: RNCC: 3 | RNVC: 2
830.735009: RNCC: 3 | RNVC: 2
735009: RNCC: 3 | RNVC: 2
57350090041: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-374-5126
Angle Bracket

123745126
L531M1039233: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-12-341-9813
Butt Hinge Leaf

123419813
DIN31212-J5X6X60: RNCC: 2 | RNVC: 2

23 Nov 1996

5340-12-026-4149

5340-12-358-2587
Spacing Threaded Standoff

123582587
1664115: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-304-7862
Lock-Release Lever

123047862
0224 4378: RNCC: 3 | RNVC: 2
02244378KZ0148-29: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-042-2065

5340-12-044-3499

5340-12-010-8457

5340-12-382-1739
Mounting Bracket

123821739
5232240240: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-381-5330
Double Angle Bracket

123815330
105-896516.12: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-12-342-3674
Buckle

123423674
42.023.305: RNCC: 3 | RNVC: 9
TSR 40: RNCC: 5 | RNVC: 9

29 Jan 1997

5340-12-307-9410
Angle Bracket

123079410
5801434-512300.02: RNCC: 2 | RNVC: 2
7800542302: RNCC: 3 | RNVC: 2
78005 42302: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-332-4198
Runner

123324198
480/7346-08-00-00/25: RNCC: 3 | RNVC: 2
480-7346-08-00-00-25: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-384-6775
Clamp Bracket

123846775
SMJ 428-320-000-001: RNCC: 3 | RNVC: 2
SMJ428-320-000-001: RNCC: 5 | RNVC: 2
S257M60T1001: RNCC: 5 | RNVC: 2

18 Mar 2011

5340-12-195-8017
Support Hook

121958017
2500067-101930.01: RNCC: 2 | RNVC: 2
2500067-101930.01: RNCC: 3 | RNVC: 2
2500067-101930-01: RNCC: 5 | RNVC: 2

19 Apr 1983

5340-12-337-0110
Bail Handle

123370110
0.021.051.9: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-12-361-0794
Mounting Bracket

123610794
0853 9583.002: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-340-6546
Swivel Caster

123406546
SH1.190.012.105: RNCC: 2 | RNVC: 2
SH1.190.012.105: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-352-6338
Mounting Bracket

123526338
1218 8105: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-352-9525
Mending Plate

123529525
CBD45402P22: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-12-392-3597
Mounting Bracket

123923597
7000150: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-346-9341
Air Inlet-Outlet Frame

123469341
8464.1201: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-12-359-7330
Mounting Plate

123597330
S281M3021101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-363-6762
Metallic Bumper

123636762
4637660019: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-175-1003
Dust And Moisture Seal Protective Cap

121751003
614K0513: RNCC: 3 | RNVC: 2
4257230074: RNCC: 5 | RNVC: 2

23 Aug 1978

5340-12-041-2987

5340-12-305-5131
Angle Bracket

123055131
81473400025: RNCC: 3 | RNVC: 2
81.47340.0025: RNCC: 5 | RNVC: 2
5000279621: RNCC: 5 | RNVC: 2

15 Nov 1985

5340-12-370-0114
Spannversch Halter

123700114
90043: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-12-186-3758
Mending Plate

121863758
2241211EE0150-44: RNCC: 3 | RNVC: 2
0224 1211: RNCC: 5 | RNVC: 2
2241211: RNCC: 5 | RNVC: 9

18 Dec 1980

5340-12-353-0302
Dust And Moisture Seal Protective Cover

123530302
1216 1771: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-301-2016
Double Angle Bracket

123012016
A-245476-045: RNCC: 3 | RNVC: 2
A245476-045: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-198-2709
Nonmetallic Bumper

121982709
27 0319 232: RNCC: 2 | RNVC: 2
9849776: RNCC: 3 | RNVC: 2
845.27 0319 232: RNCC: 5 | RNVC: 9
270319232: RNCC: 5 | RNVC: 9
27 0319 232: RNCC: 5 | RNVC: 9
9849776: RNCC: 5 | RNVC: 9

9 Jan 1984

5340-12-319-6228
Mounting Plate

123196228
504246: RNCC: 3 | RNVC: 2

19 Oct 1989

5340-12-180-5764
Strap Fastener Loop

121805764
RM6187: RNCC: 3 | RNVC: 2
R23119: RNCC: 5 | RNVC: 2
R23119: RNCC: 5 | RNVC: 9
RM6187: RNCC: 5 | RNVC: 9

19 Sep 1979

5340-12-394-4967
Mounting Bracket

123944967
L321M1815101: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-350-5930
Door Button

123505930
52.1431.062.20: RNCC: 2 | RNVC: 2
52.1431.062.20: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-389-1754
Spacing Threaded Standoff

123891754
05.06.201: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-094-0959

5340-12-343-8872
Access Cover

123438872
182903: RNCC: 2 | RNVC: 2
182903: RNCC: 5 | RNVC: 2
182903: RNCC: 5 | RNVC: 9

11 Aug 1997

5340-12-348-7712
Dust And Moisture Seal Protective Plug

123487712
800X(SIZEDN100): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-340-6916
Mounting Bracket

123406916
463-611238.000: RNCC: 3 | RNVC: 2
BHAB023: RNCC: 5 | RNVC: 2

24 May 1996

5340-12-130-1164

5340-12-308-7050
Access Cover

123087050
0535601: RNCC: 3 | RNVC: 2

10 Nov 1986

5340-12-311-2607
Electrical-Mechanical Equipment Post

123112607
2300033-610100.10U: RNCC: 2 | RNVC: 2
2300033-610100.10U: RNCC: 5 | RNVC: 9
2300033-610100.10U: RNCC: 5 | RNVC: 9

11 Aug 1987

5340-12-393-7625
Retaining Strap

123937625
9407715015: RNCC: 3 | RNVC: 2
40010418: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-359-7371
Mounting Bracket

123597371
S282M4018101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-302-0435
Sealing Plug Assembly

123020435
RD76X300POLYAMID: RNCC: 3 | RNVC: 2

29 Nov 1984

5340-12-322-1005
Double Angle Bracket

123221005
42025515: RNCC: 3 | RNVC: 2
42025515EE5052-81: RNCC: 5 | RNVC: 2

24 Jul 1990

5340-12-152-5647
Retaining Strap

121525647
7101-60-774-03: RNCC: 3 | RNVC: 2
7101-60-774.03: RNCC: 3 | RNVC: 2
164083029: RNCC: 5 | RNVC: 2
7101-60-774-03: RNCC: 5 | RNVC: 9
7101-60-774.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-129-2794
Manual Control Lever

121292794
10.73.08.02: RNCC: 3 | RNVC: 2
10-73-08-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-8233
Access Cover

123548233
J52423015-001: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-301-4281
Strap Bolt

123014281
4170220: RNCC: 3 | RNVC: 2
AS12.K12.02: RNCC: 5 | RNVC: 2
1202-116: RNCC: 5 | RNVC: 2

13 Oct 1984

5340-12-339-0275
Friction Catch Stud

123390275
2300002-181045: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-12-195-6191
Angle Bracket

121956191
PAN6605-1: RNCC: 3 | RNVC: 2
1BK 509379: RNCC: 5 | RNVC: 2

21 Mar 1983

5340-12-374-5223
Angle Bracket

123745223
L531M1039216: RNCC: 3 | RNVC: 2

22 Feb 2008

5340-12-374-2494
Door Holder

123742494
L523M1001201: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-378-7706
Bow Handle

123787706
1000.8766.00: RNCC: 3 | RNVC: 2
1000.8766.00: RNCC: 5 | RNVC: 2

12 May 2009

5340-12-379-5347
Access Cover

123795347
S533M6037102: RNCC: 3 | RNVC: 2
10307793: RNCC: 6 | RNVC: 9

5 Aug 2009

5340-12-375-2103
Mounting Plate

123752103
L282M2007101: RNCC: 3 | RNVC: 2

5 May 2008

5340-12-300-2806
Catch Strike

123002806
3196880087: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-340-6933
Mounting Bracket

123406933
40 0226 035: RNCC: 3 | RNVC: 2
40 0226 035: RNCC: 5 | RNVC: 9

24 May 1996

5340-12-352-0389
Mending Plate

123520389
2300387-700800.001: RNCC: 2 | RNVC: 2
9914777: RNCC: 3 | RNVC: 2
2300387-700800.001: RNCC: 5 | RNVC: 9
9914777: RNCC: 5 | RNVC: 9

9 Oct 2000

5340-12-179-7766
Loop Clamp

121797766
4258320214: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-179-6384
Nonmetallic Bumper

121796384
3228910101: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-171-1739
Resilient Mount

121711739
DIN95363-E20X20-M5X20-NR70ST: RNCC: 4 | RNVC: 1
505006-M5X20.NR70.ST: RNCC: 5 | RNVC: 2
BE4-40-28A: RNCC: 5 | RNVC: 9
VG95363-E20X20-M5X20-NR70ST: RNCC: 5 | RNVC: 9

14 Sep 1977

5340-12-164-5226
Butt Hinge Leaf

121645226
23290-184000.007: RNCC: 2 | RNVC: 2
23290-184000.007: RNCC: 3 | RNVC: 2
23290-184000-007: RNCC: 5 | RNVC: 2
23290-184000.007: RNCC: 5 | RNVC: 9
23290-184000-007: RNCC: 5 | RNVC: 9
23290-184000.007: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-9091
Double Angle Bracket

123409091
160-26854-19: RNCC: 3 | RNVC: 2
160-26854-19: RNCC: 5 | RNVC: 9

2 Jul 1996

5340-12-328-0234
Mending Plate

123280234
8344717-09: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-12-383-9884
Mounting Bracket

123839884
V6546-01100-175: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-12-364-4434
Access Cover

123644434
2300397-182512.000.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-315-4054
Lock-Release Lever

123154054
CV7: RNCC: 3 | RNVC: 2
06-000/1: RNCC: 5 | RNVC: 2

19 Oct 1988

5340-12-701-4166
Mounting Bracket

127014166
VG95211-ML-127014166: RNCC: 2 | RNVC: 2
5.12.5311.8450.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-5527
Dust And Moisture Seal Protective Cap

121905527
801M22X1,5: RNCC: 3 | RNVC: 2
05481: RNCC: 5 | RNVC: 2
GPN800;M22X1,5 FORM B: RNCC: 5 | RNVC: 2
801221500: RNCC: 5 | RNVC: 2
GPN800,M22X1,5 FORM B: RNCC: 5 | RNVC: 2
GPN800M22X1-5F0RMB: RNCC: 5 | RNVC: 2
M22X1,5GPN800 FORM B: RNCC: 5 | RNVC: 2

2 Dec 1981

5340-12-701-3940
Mounting Bracket

127013940
VG95211-ML-127013940: RNCC: 2 | RNVC: 2
5.12.5311.1381.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-6120
Mounting Bracket

123426120
4205659008: RNCC: 3 | RNVC: 2
4205019008: RNCC: 5 | RNVC: 2

6 Mar 1997

5340-12-322-2526
Retaining Strap

123222526
10040101: RNCC: 2 | RNVC: 2
10040101: RNCC: 3 | RNVC: 2

6 Aug 1990

5340-12-346-9556
Clip Retainer Plate

123469556
105-90931: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-12-349-0694
Mounting Bracket

123490694
1201578: RNCC: 3 | RNVC: 2
USA10: RNCC: 5 | RNVC: 2

20 Sep 1999

5340-12-308-7289
Retaining Strap

123087289
A11A812411201: RNCC: 3 | RNVC: 2

11 Nov 1986

5340-12-376-8139
Spring Tension Clip

123768139
0015331940: RNCC: 3 | RNVC: 2

10 Nov 2008

5340-12-342-1581
Mounting Bracket

123421581
536L02037: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-379-8471
Threaded Rod End

123798471
05920008: RNCC: 3 | RNVC: 2
CV168913: RNCC: 5 | RNVC: 2
05920008: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-305-5677
Angle Bracket

123055677
4219195042: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-379-4050
Loop Clamp

123794050
0009955142: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-308-5092
Handle Grip

123085092
DIN98-E20-ST: RNCC: 2 | RNVC: 2

17 Oct 1986

5340-12-185-9273
Bow Handle

121859273
2421801: RNCC: 3 | RNVC: 2

8 Nov 1980

5340-12-305-5988
Double Angle Bracket

123055988
4048360032: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-302-7907
Mending Plate

123027907
178.E77.80A-91: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-043-2729

5340-12-342-3716
Door Handle

123423716
701837206: RNCC: 3 | RNVC: 9

29 Jan 1997

5340-12-340-5948
Loop Clamp

123405948
PAN4231CBCC5318: RNCC: 3 | RNVC: 2

9 May 1996

5340-12-043-7156

5340-12-316-2964
Access Door

123162964
5191066: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-310-8837
Mounting Bracket

123108837
201276: RNCC: 3 | RNVC: 2

3 Jul 1987

5340-12-315-3674
Rod End Clevis

123153674
42204105: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-12-308-6418
Butt Hinge

123086418
04575: RNCC: 3 | RNVC: 2

31 Oct 1986

5340-12-352-7124
Access Cover

123527124
64416340: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-312-0021
Mending Plate

123120021
01TL12488: RNCC: 3 | RNVC: 2

10 Nov 1987

5340-12-702-2071
Blank Panel

127022071
VG95211-ML-127022071: RNCC: 2 | RNVC: 2
30.7211.511.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-8411
Dust And Moisture Seal Protective Cap

123658411
171 880 747-01C: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-12-357-0685
Mounting Plate

123570685
2500261-030000.010.0: RNCC: 2 | RNVC: 2
2500261-030000.010.0: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-12-701-6436
Angle Bracket

127016436
VG95211-ML-127016436: RNCC: 2 | RNVC: 2
5.12.7204.0250.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-2462
Access Cover

123862462
2500261-068130.002.0: RNCC: 2 | RNVC: 2
2500261-068130.002.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-352-2165
Angle Bracket

123522165
J32120007-001: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-322-3851
Webbing Strap

123223851
151M-5-N/460MM: RNCC: 3 | RNVC: 2
708-137 001-001-0: RNCC: 5 | RNVC: 2
151M-5-N/460MM: RNCC: 5 | RNVC: 9
151M-5-N/460: RNCC: 5 | RNVC: 9
0120/036010-0001.01.00: RNCC: 5 | RNVC: 9

16 Aug 1990

5340-12-701-9750
Rod End Connector

127019750
VG95211-ML-127019750: RNCC: 2 | RNVC: 2
1-2-594 OST1 10232-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-3309
Track Stop

123583309
2500262-194200.001.0: RNCC: 2 | RNVC: 2
2500262-194200.001.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-385-6899
Plug Button

123856899
4100036-330213.000.0: RNCC: 2 | RNVC: 2
4100036-330213.000.0: RNCC: 3 | RNVC: 2

30 Jun 2011

5340-12-375-1815
Spring Holder

123751815
L311M3803206: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-12-319-8675
Loop Clamp

123198675
52309: RNCC: 3 | RNVC: 2

10 Nov 1989

5340-12-321-4208
Retaining Strap

123214208
5559952468: RNCC: 3 | RNVC: 2
5559952468: RNCC: 5 | RNVC: 2
5559952468: RNCC: 5 | RNVC: 2

17 May 1990

5340-12-317-9559
Loop Clamp

123179559
LN9491A16: RNCC: 2 | RNVC: 2

30 May 1989

5340-12-314-1237
Loop Clamp

123141237
6204921140: RNCC: 3 | RNVC: 2
620 492 11 40: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-318-6562
Retaining Strap

123186562
2200473: RNCC: 3 | RNVC: 9

3 Aug 1989

5340-12-357-9170
Mounting Bracket

123579170
2300042-254240.000: RNCC: 2 | RNVC: 2
2300042-254240.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-362-6218
Nonmetallic Bumper

123626218
127382-27-30-2000-11: RNCC: 2 | RNVC: 2
127382-27-30-2000-11: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-182-4614
Retaining Strap

121824614
2410528769: RNCC: 3 | RNVC: 2
5801506-5540-000: RNCC: 5 | RNVC: 2
24105 28769: RNCC: 5 | RNVC: 9
5801506-5540-000: RNCC: 5 | RNVC: 9

4 Feb 1980

5340-12-371-2897
Escutcheon Plate

123712897
8352-0027: RNCC: 2 | RNVC: 2
8352-0027: RNCC: 3 | RNVC: 2

9 Mar 2007

5340-12-332-8098
Mounting Plate

123328098
C72165-A421-C47: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-12-700-1999
Lock-Release Lever

127001999
51-262305044: RNCC: 2 | RNVC: 2
765-50-SB386: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-357-9919
Threaded Rod End

123579919
33021-009-022: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-12-340-0066
Mounting Bracket

123400066
87-401.85-05.03-00: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-12-175-8292
Handle Grip

121758292
12709-13100.003: RNCC: 2 | RNVC: 2
333008-0203.000: RNCC: 3 | RNVC: 2
12709-13100.003: RNCC: 5 | RNVC: 2
12709-13100-003: RNCC: 5 | RNVC: 9
333008-0203.000: RNCC: 5 | RNVC: 9
12709-13100-003: RNCC: 5 | RNVC: 9

23 Oct 1978

5340-12-306-3631
Dust And Moisture Seal Protective Plug

123063631
1300256-140.06: RNCC: 2 | RNVC: 2
774-021-71: RNCC: 3 | RNVC: 2

24 Feb 1986

5340-12-182-2003
Strap Hinge

121822003
2300033-311700-08: RNCC: 2 | RNVC: 2
2300033-311700.08: RNCC: 5 | RNVC: 9
2300033-311700-08: RNCC: 5 | RNVC: 9
FTW302-03-15-07-08B: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-352-6318
Webbing Strap

123526318
8310-0005: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-195-9530
Dust And Moisture Seal Protective Cap

121959530
M261079: RNCC: 3 | RNVC: 9
M261079: RNCC: 5 | RNVC: 2

5 May 1983

5340-12-357-2156
Mounting Bracket

123572156
0005250739: RNCC: 3 | RNVC: 2

22 May 2002

5340-12-385-6816
Angle Bracket

123856816
5502030143: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-353-4917
Spacing Threaded Standoff

123534917
8711590271: RNCC: 3 | RNVC: 2
871 159 02 71: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-356-1447
Bow Handle

123561447
BK100199: RNCC: 3 | RNVC: 2
BK100199: RNCC: 5 | RNVC: 2

28 Jan 2002

5340-12-363-0539
Mounting Plate

123630539
2300042-992137.000: RNCC: 2 | RNVC: 2
2300042-992137.000: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-333-1800
Access Cover

123331800
81429025192: RNCC: 2 | RNVC: 2
81429025192: RNCC: 3 | RNVC: 2
81.42902.5192: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-12-352-8745
Cushioning Pad

123528745
9030901001: RNCC: 3 | RNVC: 2
903 090 1001: RNCC: 5 | RNVC: 2

27 Dec 2000

5340-12-360-8172
Access Cover

123608172
15745301: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-366-7346
Mounting Bracket

123667346
187404309: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-360-4762
Nonmetallic Bumper

123604762
06127525: RNCC: 3 | RNVC: 2
06127525: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-302-1604

5340-12-300-5418

5340-12-339-1865
Quick Release Plunger

123391865
MM 3282 G 003: RNCC: 3 | RNVC: 2
MM 3282 G 003-4: RNCC: 5 | RNVC: 9
3282 G 003-4: RNCC: 5 | RNVC: 9
MM 3282 G 003: RNCC: 5 | RNVC: 9

24 Oct 1995

5340-12-360-9263
Mounting Bracket

123609263
0000.688426: RNCC: 3 | RNVC: 2
999999-01633-4/RECHTS: RNCC: 5 | RNVC: 2

24 Jul 2003

5340-12-702-5711
Mounting Bracket

127025711
VG95211-ML-127025711: RNCC: 2 | RNVC: 2
5.51.7702.0120.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-313-0201
Double Angle Bracket

123130201
P-086149-011: RNCC: 3 | RNVC: 2
P086149-011: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-311-8910
Resilient Mount

123118910
DIN95363-A25X10-NR70ST-M6X16: RNCC: 4 | RNVC: 1
781061HART: RNCC: 5 | RNVC: 2
50.96210-0043: RNCC: 5 | RNVC: 2
1.25.10.1.70NR/ST-M6X16: RNCC: 5 | RNVC: 2
811.000.025.010.06X16.NR70.ST: RNCC: 5 | RNVC: 2
81100-25X10-M6X16.NR70.ST: RNCC: 5 | RNVC: 2
50.96210-0043: RNCC: 5 | RNVC: 2
VG95363-A25X10-M6X16-NR70ST: RNCC: 5 | RNVC: 9
VG95363-A25X10-NR70ST-M6X16: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-191-5651
Friction Catch

121915651
02-0899-180540.01.0: RNCC: 3 | RNVC: 2
02-0899-180540-01-0: RNCC: 5 | RNVC: 2

11 Feb 1982

5340-12-300-4597
Sealing Plug Assembly

123004597
E4-2032090: RNCC: 3 | RNVC: 2
E4-2032090: RNCC: 5 | RNVC: 9

3 Aug 1984

5340-12-161-9880
Spring Tension Clip

121619880
49 0620 78: RNCC: 3 | RNVC: 2
49062078: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-7322
Double Angle Bracket

123177322
3436801: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-376-9192
Mounting Bracket

123769192
160.03.0291: RNCC: 3 | RNVC: 2
300.062.317: RNCC: 5 | RNVC: 2

24 Nov 2008

5340-12-182-5202
Bow Handle

121825202
81970015030: RNCC: 3 | RNVC: 2

8 Feb 1980

5340-12-173-2300
Angle Bracket

121732300
PAN5315B: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-12-145-1594

5340-12-336-2845
Access Cover

123362845
4620 335 088: RNCC: 3 | RNVC: 2
4620335088: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-310-7594
Electrical-Mechanical Equipment Post

123107594
4900278-603000.02: RNCC: 2 | RNVC: 2
4900278-603000.02: RNCC: 3 | RNVC: 2

29 Jun 1987

5340-12-317-9502
Nonmetallic Bumper

123179502
81436010039: RNCC: 3 | RNVC: 2
81.43601.0039: RNCC: 5 | RNVC: 2

29 May 1989

5340-12-386-6008
Mounting Bracket

123866008
0420 6105: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-391-8145
Loop Clamp

123918145
916016052201: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-12-368-6372
Angle Bracket

123686372
34289: RNCC: 3 | RNVC: 2
34289: RNCC: 5 | RNVC: 2

3 Apr 2006

5340-12-373-8769
Clamping Catch

123738769
2300397-970167.000.0: RNCC: 3 | RNVC: 2
1897384: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-12-369-0747
Angle Bracket

123690747
7803221103AA: RNCC: 3 | RNVC: 2
1030010-721000.003.0: RNCC: 5 | RNVC: 2

18 May 2006

5340-12-356-1649
Dust And Moisture Seal Protective Cap

123561649
1269870745: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-12-143-4164
Retaining Strap

121434164
TWH01-027: RNCC: 3 | RNVC: 2
TWH01-027: RNCC: 3 | RNVC: 2
TWH01-027: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-379-2781
Angle Bracket

123792781
0069311: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-12-010-8483

5340-12-381-9910
Runner

123819910
000605-204410.03: RNCC: 2 | RNVC: 2
000605-204410.03: RNCC: 3 | RNVC: 2
39206: RNCC: 5 | RNVC: 2

26 Apr 2010

5340-12-195-0166
Angle Bracket

121950166
5577438: RNCC: 3 | RNVC: 2
557.7438: RNCC: 5 | RNVC: 2

30 Dec 1982

5340-12-325-4175
Handle Grip

123254175
6202680042: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-12-128-4988

5340-12-349-8059
Manual Control Lever

123498059
32 72 2 314 072: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-394-6073
Access Cover

123946073
10.4918.3: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-12-358-9312
Retaining Bail

123589312
2481-396200.001.0: RNCC: 2 | RNVC: 2
2481-396200.001.0: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-173-4606
Turnbuckle

121734606
4178672: RNCC: 3 | RNVC: 2
87.12.00000.0028.0: RNCC: 5 | RNVC: 2
4178672: RNCC: 5 | RNVC: 9

18 Apr 1978

5340-12-354-6693
Retaining Strap

123546693
03.189.08.70.0: RNCC: 3 | RNVC: 2

14 Aug 2001

5340-12-390-7364
Mounting Bracket

123907364
107W175320.000.0: RNCC: 2 | RNVC: 2
107W175320.000.0: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-12-323-8162
Access Door

123238162
10 0021 528: RNCC: 2 | RNVC: 2
10 0021 528: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-324-6895
Mounting Bracket

123246895
272.324 808: RNCC: 3 | RNVC: 2

15 Mar 1991

5340-12-178-7871
Angle Bracket

121787871
81974800671: RNCC: 3 | RNVC: 2

16 May 1979

5340-12-316-8999
Mounting Bracket

123168999
63360160: RNCC: 3 | RNVC: 2
LWN8207: RNCC: 5 | RNVC: 2
63360150: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-12-353-5456
Section Block Clamp

123535456
JN0413FL50: RNCC: 3 | RNVC: 2

5 Apr 2001

5340-12-315-1896
Double Angle Bracket

123151896
6212850940: RNCC: 3 | RNVC: 2
621 285 09 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-360-9061
Angle Bracket

123609061
431271262930: RNCC: 3 | RNVC: 2
4312 712 6293E: RNCC: 5 | RNVC: 2

23 Jul 2003

5340-12-368-4573
Loop Clamp

123684573
DIN3016-1-D1-19X15-W1-2-EPDM: RNCC: 2 | RNVC: 2

14 Mar 2006

5340-12-389-6750
Loop Clamp

123896750
DIN3016-1-D1-30X15-W3-EPDM: RNCC: 2 | RNVC: 2
RSGU1.30/15-W3: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-12-346-4024
Dust And Moisture Seal Protective Cap

123464024
13 230 046: RNCC: 3 | RNVC: 2

21 Jul 1998

5340-12-198-1173
Flush Lock

121981173
251837016: RNCC: 3 | RNVC: 9
251837016A: RNCC: 3 | RNVC: 9

21 Dec 1983

5340-12-010-8455

5340-12-346-6433
Access Cover

123466433
53.1622.512.01: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-12-342-1404
Lock-Release Lever

123421404
136L54515: RNCC: 3 | RNVC: 2
136L54515E1: RNCC: 5 | RNVC: 2
136L54515E1: RNCC: 5 | RNVC: 2
136L54515E1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-320-4771
Helical Compression Spring Seat

123204771
7261004: RNCC: 3 | RNVC: 2
7261 004: RNCC: 5 | RNVC: 2

18 Jan 1990

5340-12-375-8348
Mounting Bracket

123758348
056616: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-316-9826
Dust And Moisture Seal Protective Cap

123169826
20732: RNCC: 3 | RNVC: 2
ST13: RNCC: 5 | RNVC: 2

1 Mar 1989

5340-12-393-8206
Butt Hinge

123938206
1056-U15: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-366-6619
Rim Latch Set

123666619
16007032: RNCC: 3 | RNVC: 2

20 May 2005

5340-12-388-9520
Barrel Bolt

123889520
252.70.731: RNCC: 3 | RNVC: 2

9 May 2012

5340-12-353-8736
Mounting Bracket

123538736
0780200E02: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-120-8057
Retaining Strap

121208057
DIN72571-2X5-ST-ZN: RNCC: 2 | RNVC: 2
DIN72571-2X5-ST-ZN: RNCC: 3 | RNVC: 2
DIN72571-2X5-ST-GESCHWAERZT: RNCC: 5 | RNVC: 9
2X5DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 9
2X5DIN72571STSWGEBR: RNCC: 5 | RNVC: 9
DIN72571-2X5-ST-GESCHWAERZT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-0149
Manual Control Handle

121780149
06430-2083X15: RNCC: 3 | RNVC: 2
NLM6430-2083X15: RNCC: 5 | RNVC: 9
NLM643-1208X15: RNCC: 5 | RNVC: 9
NLM643-2083X15: RNCC: 5 | RNVC: 9

14 Mar 1979

5340-12-150-9580
Pad Eye

121509580
2556-0600.03: RNCC: 2 | RNVC: 2
2556-0600.03: RNCC: 3 | RNVC: 2
2556-0600-03: RNCC: 5 | RNVC: 2
2556-0600-03: RNCC: 5 | RNVC: 2
2556-0600-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-3756
Loop Clamp

121663756
5VC4214: RNCC: 3 | RNVC: 2
2101017: RNCC: 3 | RNVC: 2
3050NLGK: RNCC: 5 | RNVC: 2
3050/LGK: RNCC: 5 | RNVC: 2

31 Aug 1976

5340-12-198-7823
Plug Button

121987823
1686-391200.01: RNCC: 3 | RNVC: 2
1686-391200-01: RNCC: 5 | RNVC: 2
1686-391200.01: RNCC: 5 | RNVC: 9

27 Feb 1984

5340-12-195-6901
Case Corner

121956901
5801557-2120.00: RNCC: 2 | RNVC: 2
5801557-2120.00: RNCC: 3 | RNVC: 2
5801557-2120: RNCC: 5 | RNVC: 2
5801557-2120: RNCC: 5 | RNVC: 9

29 Mar 1983

5340-12-702-4580
Mounting Bracket

127024580
VG95211-ML-127024580: RNCC: 2 | RNVC: 2
5.51.0603.0013.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-310-2066
Angle Bracket

123102066
S35623-01-6-229: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-12-365-9295
Mounting Bracket

123659295
9424292168: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-385-4280
Access Cover

123854280
5580903343: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-370-8651
Permanent Magnet

123708651
169 371 00 03: RNCC: 3 | RNVC: 2
1693710003: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-12-387-7344
Threaded Rod End

123877344
495247: RNCC: 3 | RNVC: 2

27 Jan 2012

5340-12-371-3332
Mending Plate

123713332
1227 9769: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-12-043-7681

5340-12-374-9564
Mounting Bracket

123749564
279.656 982: RNCC: 2 | RNVC: 2
279.656 982: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-12-318-0179
Double Angle Bracket

123180179
51974800654: RNCC: 3 | RNVC: 2
51.97480.0654: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-315-1874
Mounting Bracket

123151874
6202420901: RNCC: 3 | RNVC: 2
620 242 09 01: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-326-4570
Dust And Moisture Seal Protective Cap

123264570
268 781 00 04: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-164-5669

5340-12-340-9966
Flush Lock

123409966
6020404: RNCC: 3 | RNVC: 2
6020404: RNCC: 5 | RNVC: 2

13 Jul 1996

5340-12-176-4916
Butt Hinge Leaf

121764916
WW 306 048 BR: RNCC: 2 | RNVC: 2
WW 306 048 BR: RNCC: 3 | RNVC: 9
WW306048AR: RNCC: 5 | RNVC: 2
WW 306 048 BR: RNCC: 5 | RNVC: 2
WW 306 048 AR: RNCC: 5 | RNVC: 2
WW 306 048 AR: RNCC: 5 | RNVC: 9
WW306048AR: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-186-4276
Rod End Clevis

121864276
873 072 0019: RNCC: 2 | RNVC: 2
8730720019: RNCC: 3 | RNVC: 2

30 Dec 1980

5340-12-347-0047
Angle Bracket

123470047
T671M5045205: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-357-9156
Retaining Strap

123579156
2300042-255400.021: RNCC: 2 | RNVC: 2
2300042-255400.021: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-094-4343

5340-12-374-0721
Angle Bracket

123740721
181430812: RNCC: 2 | RNVC: 2
181430812: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-12-379-7952
Webbing Strap

123797952
2452-60600: RNCC: 3 | RNVC: 2

2 Sep 2009

5340-12-349-3447
Swivel Caster

123493447
32 25 01 01: RNCC: 3 | RNVC: 2
32250101: RNCC: 5 | RNVC: 2

29 Oct 1999

5340-12-318-2563
Mounting Bracket

123182563
RP650626: RNCC: 3 | RNVC: 2

23 Jun 1989

5340-12-375-3133
Compression Cup

123753133
0501 316 333: RNCC: 3 | RNVC: 2
0501316333: RNCC: 5 | RNVC: 2

20 May 2008

5340-12-196-7002
Nonmetallic Bumper

121967002
24251: RNCC: 3 | RNVC: 2

3 Aug 1983

5340-12-306-3570
Mending Plate

123063570
A-230609-001: RNCC: 3 | RNVC: 2
A230609-001: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-309-1827
Angle Bracket

123091827
P-243996-755: RNCC: 3 | RNVC: 2
P243996-755: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-701-9145
Dashpot

127019145
VG95211-ML-127019145: RNCC: 2 | RNVC: 2
SD15-5000-200B: RNCC: 3 | RNVC: 2
SD15-5500-200 B: RNCC: 5 | RNVC: 2
050102405129: RNCC: 5 | RNVC: 2
0501024051290: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-178-9129
Loop Clamp

121789129
5561846: RNCC: 3 | RNVC: 2
5561846/4: RNCC: 5 | RNVC: 2
5561846-4: RNCC: 5 | RNVC: 9

25 May 1979

5340-12-149-7351
Plug Button

121497351
105-071-125-1: RNCC: 3 | RNVC: 2
105-071-125: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-167-1035
Loop Clamp

121671035
DIN3016-2-G1-64X15-W5: RNCC: 2 | RNVC: 2
DIN3016-G1-64X15-W5: RNCC: 3 | RNVC: 2
SP64/15SKZ-W5: RNCC: 3 | RNVC: 2
1410700064: RNCC: 5 | RNVC: 2
SP64/15SKZ-1.4571: RNCC: 5 | RNVC: 2
SP64-15SKZ1-4571: RNCC: 5 | RNVC: 2
DIN3016-G1-64X15-W5: RNCC: 5 | RNVC: 9
VG95931-G64X15-W5: RNCC: 5 | RNVC: 9
VG95931G64X15W5: RNCC: 5 | RNVC: 9

23 Nov 1976

5340-12-341-0362
Mounting Plate

123410362
2500262-195100.000.0: RNCC: 2 | RNVC: 2
2500262-195100.000.0: RNCC: 3 | RNVC: 2

19 Jul 1996

5340-12-310-8563
Dust And Moisture Seal Protective Cap

123108563
MD-012-5-74-KU: RNCC: 3 | RNVC: 2

2 Jul 1987

5340-12-346-4796
Dust And Moisture Seal Protective Cap

123464796
81461130088: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-12-362-9330
Mounting Bracket

123629330
6160700924: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-12-132-3021

5340-12-131-7482

5340-12-358-9593
Tee Hinge

123589593
0006470155: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-358-6291
Mounting Plate

123586291
ST152018: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-358-7912
Mounting Bracket

123587912
6753261040: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-041-0602

5340-12-134-6154

5340-12-307-1581
Retaining Strap

123071581
4217250041: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-372-8527
Dust And Moisture Seal Protective Plug

123728527
R002949.051: RNCC: 3 | RNVC: 2

28 Aug 2007

5340-12-362-8639
Nonmetallic Bumper

123628639
16001648: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-306-6223
Dust And Moisture Seal Protective Cap

123066223
030 000 001 012: RNCC: 3 | RNVC: 2
030000001012: RNCC: 3 | RNVC: 2
000 338 22 56: RNCC: 5 | RNVC: 2
0003382256: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-352-9877
Angle Bracket

123529877
F02260: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-360-3519
Spring Tension Clip

123603519
0009502233: RNCC: 3 | RNVC: 2
0009502233: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-301-0655
Angle Bracket

123010655
54.0028.126.01: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-091-0687

5340-12-367-6771
Retaining Band

123676771
6674700240: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-12-356-4179
Spring Loaded Cylinder Fastener

123564179
028013312: RNCC: 3 | RNVC: 2
028013312: RNCC: 5 | RNVC: 9

26 Feb 2002

5340-12-338-2875
Luggage Handle

123382875
431086: RNCC: 3 | RNVC: 2
591004777: RNCC: 5 | RNVC: 2
1.011: RNCC: 5 | RNVC: 2

14 Jun 1995

5340-12-349-6200
Mounting Bracket

123496200
46712310872: RNCC: 3 | RNVC: 2
46 71 2 310 872: RNCC: 5 | RNVC: 2

9 Dec 1999

5340-12-361-0786
Nonmetallic Bumper

123610786
2300246-261786.02.0: RNCC: 2 | RNVC: 2
2300246-261786.02.0: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-301-4889
Pipe Bracket

123014889
1423-910.09(2): RNCC: 3 | RNVC: 2

19 Oct 1984

5340-12-390-8418
Mounting Plate

123908418
2.045.910.9: RNCC: 3 | RNVC: 2
80088621: RNCC: 5 | RNVC: 2

19 Dec 2012

5340-12-195-0946

5340-12-313-5728
Access Cover

123135728
2300013-5626.00: RNCC: 2 | RNVC: 2
2300013-5626.00: RNCC: 3 | RNVC: 2
2300013-5626.00: RNCC: 5 | RNVC: 9

16 Apr 1988

5340-12-384-2902
Roller Holder

123842902
9241643000: RNCC: 3 | RNVC: 2
9241643000: RNCC: 5 | RNVC: 2
23979: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-354-2724
Access Cover

123542724
1658-381000.004.0: RNCC: 2 | RNVC: 2
1658-381000.004.0: RNCC: 3 | RNVC: 2

26 Jun 2001

5340-12-375-1335
Multiple Angle Bracket

123751335
949635977: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-361-5444
Mounting Bracket

123615444
230.5013: RNCC: 3 | RNVC: 2
230.5013.001: RNCC: 5 | RNVC: 2

16 Oct 2003

5340-12-353-0887
Dust And Moisture Seal Boot

123530887
020301261A: RNCC: 3 | RNVC: 2

25 Jan 2001

5340-12-130-8945

5340-12-145-7390
Escutcheon Plate

121457390
5800179: RNCC: 3 | RNVC: 2
0007660212: RNCC: 5 | RNVC: 2
39047: RNCC: 5 | RNVC: 2
4700011: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-1408
Loop Clamp

123501408
LN9490BK50: RNCC: 2 | RNVC: 2

21 Feb 2000

5340-12-350-4339
Section Block Clamp

123504339
JN0413CCCC54: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-188-6641
Manual Control Handle

121886641
297.309: RNCC: 3 | RNVC: 2

23 Jul 1981

5340-12-159-2225
Dust And Moisture Seal Protective Plug

121592225
344011215: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-090-6689

5340-12-320-1913
Butt Hinge Leaf

123201913
1160430: RNCC: 3 | RNVC: 9

15 Dec 1989

5340-12-322-2710
Mounting Bracket

123222710
10 0014 214: RNCC: 3 | RNVC: 2

7 Aug 1990

5340-12-147-9151
Angle Bracket

121479151
259053: RNCC: 3 | RNVC: 2
259053A3: RNCC: 5 | RNVC: 2
0331 8147: RNCC: 5 | RNVC: 2
3318147KZ0154-46: RNCC: 5 | RNVC: 2
3318147: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-2112
Mounting Bracket

123202112
0241 3443: RNCC: 3 | RNVC: 2
02413443EE0147-17: RNCC: 5 | RNVC: 2

19 Dec 1989

5340-12-356-0916
Spring Tension Clip

123560916
0008310234: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-149-1077
Mending Plate

121491077
121L18006: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-042-4080

5340-12-321-6573
Helical Compression Spring Retainer

123216573
2.72-28416: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-308-5715
Escutcheon Plate

123085715
111827517B: RNCC: 3 | RNVC: 2
4008.1201.3: RNCC: 5 | RNVC: 2
111827517B: RNCC: 5 | RNVC: 2

24 Oct 1986

5340-12-314-5705
Mending Plate

123145705
288135677: RNCC: 3 | RNVC: 2

20 Jul 1988

5340-12-304-5054
Double Angle Bracket

123045054
0224 7342: RNCC: 3 | RNVC: 2
K0002247342: RNCC: 5 | RNVC: 2
02247342EC0148-29: RNCC: 5 | RNVC: 9

26 Jul 1985

5340-12-354-8655
Rod End Connector

123548655
8398 110 118: RNCC: 3 | RNVC: 2
06440P002001: RNCC: 5 | RNVC: 2
8398110118: RNCC: 5 | RNVC: 9

30 Aug 2001

5340-12-331-5396
Angle Bracket

123315396
SZ2583000: RNCC: 3 | RNVC: 2
SZ2583: RNCC: 5 | RNVC: 2

17 May 1993

5340-12-374-2549
Mounting Plate

123742549
L521M1059220: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-390-0754
Bumper

123900754
S252M3356213: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-12-318-8726
Nonmetallic Bumper

123188726
3018471102: RNCC: 3 | RNVC: 2
3018471101: RNCC: 5 | RNVC: 2
81.96210.0244: RNCC: 5 | RNVC: 2
81962100244: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-163-5611
Loop Clamp

121635611
LN9490B20: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-313-1675

5340-12-164-0070
Verbindungs Platte

5340-12-324-2765
Catch Strike

123242765
TL-17-202-07: RNCC: 3 | RNVC: 2
335948-3704.000: RNCC: 3 | RNVC: 2
335948-3704.000: RNCC: 5 | RNVC: 2
TL802-2: RNCC: 5 | RNVC: 9
TL802-2-RAL6031F9: RNCC: 5 | RNVC: 9

1 Feb 1991

5340-12-197-4171
Loop Clamp

121974171
2140063: RNCC: 3 | RNVC: 2
9826C-6: RNCC: 3 | RNVC: 2
62640171: RNCC: 5 | RNVC: 2
N3200: RNCC: 5 | RNVC: 2
2640/171: RNCC: 5 | RNVC: 9
9826C-6: RNCC: 5 | RNVC: 9

20 Oct 1983

5340-12-176-0833
Mending Plate

121760833
81411402219: RNCC: 3 | RNVC: 2
23246-150600-021-0: RNCC: 5 | RNVC: 9
23246-150600.021.0: RNCC: 5 | RNVC: 9

8 Nov 1978

5340-12-301-1297
Nut And Bolt Locking Plate

123011297
P-230129-215: RNCC: 3 | RNVC: 2
P230129-215: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-172-7877
Mending Plate

121727877
7823-507: RNCC: 3 | RNVC: 9
7823507: RNCC: 5 | RNVC: 9
063507-4: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-190-5881
Resilient Mount

121905881
DIN95362-F1-NR55ST: RNCC: 2 | RNVC: 2
V-TEILE,F1,55NR/ST: RNCC: 5 | RNVC: 2
725001-NR55.ST: RNCC: 5 | RNVC: 2
81820-NR55.ST: RNCC: 5 | RNVC: 2
25284BSTN5590: RNCC: 5 | RNVC: 2
25284SM550: RNCC: 5 | RNVC: 2
25284,NR55ST: RNCC: 5 | RNVC: 2
VG95362-F-NR55ST: RNCC: 5 | RNVC: 9
VG95362-F1-NR55ST: RNCC: 5 | RNVC: 9
VG95362FNR55ST: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-303-1213
Spring Tension Clip

123031213
P-145274-009: RNCC: 3 | RNVC: 2
P145274-009: RNCC: 5 | RNVC: 2

26 Feb 1985

5340-12-152-4839
Retaining Strap

121524839
115-03237-4: RNCC: 3 | RNVC: 9
1092105-3701-002: RNCC: 5 | RNVC: 9
1092105-3701-002: RNCC: 5 | RNVC: 9
4-7822-761: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-9146
Nonmetallic Bumper

121839146
VG95092A4,0X1,5X12,5X5,5PVCWEICH: RNCC: 2 | RNVC: 2
E00.600.5.0016: RNCC: 3 | RNVC: 2
82200-A4,0X1,5X12,5X5,5.PVCWEICH: RNCC: 3 | RNVC: 2
A4,0X1,5X12,5X5,5.PVC2WEICH: RNCC: 5 | RNVC: 2
3210: RNCC: 5 | RNVC: 2
E00-600-5-0016: RNCC: 5 | RNVC: 2
2709476022: RNCC: 5 | RNVC: 2
E00-600-5-0016-3210: RNCC: 5 | RNVC: 2
E0060050016: RNCC: 5 | RNVC: 2
27094 76022: RNCC: 5 | RNVC: 9

29 May 1980

5340-12-345-1396
Detent Plunger

123451396
2500266-332100.03.0: RNCC: 3 | RNVC: 2
2500266-332100-03-0: RNCC: 5 | RNVC: 2

4 Feb 1998

5340-12-194-6527
Nonmetallic Bumper

121946527
DIN95364-A100X15-M16X35-NR45ST: RNCC: 2 | RNVC: 2
530000-100X15-M16X35.NR45.ST: RNCC: 5 | RNVC: 2
811.030.100.015.16X35.NR55.ST: RNCC: 5 | RNVC: 2
V5/100A34: RNCC: 5 | RNVC: 2
V5/100A34: RNCC: 5 | RNVC: 2
VG95364-A100X15-M16X35-NR45ST: RNCC: 5 | RNVC: 9
VG95364-A100X15-NR45ST-M16X35: RNCC: 5 | RNVC: 9
W 3695 141-A: RNCC: 5 | RNVC: 9

25 Nov 1982

5340-12-308-5303
Recess Handle

123085303
293.1: RNCC: 3 | RNVC: 2

21 Oct 1986

5340-12-314-4296
Mending Plate

123144296
027072535: RNCC: 3 | RNVC: 2

6 Jul 1988

5340-12-345-3754
Plug Button

123453754
81619610032: RNCC: 3 | RNVC: 2
29519: RNCC: 5 | RNVC: 2

10 Mar 1998

5340-12-374-2531
Mounting Bracket

123742531
L531M1063101: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-194-2084
Plug Button

121942084
2980064: RNCC: 3 | RNVC: 2
298.0064: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-182-0211
Mounting Bracket

121820211
01TC30614: RNCC: 3 | RNVC: 2

7 Jan 1980

5340-12-373-7342
Angle Bracket

123737342
T947M4005206: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-12-391-4632
Access Cover

123914632
I009820TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-197-2655
Catch Strike

121972655
01236577: RNCC: 3 | RNVC: 2
1236577EE8935-37: RNCC: 5 | RNVC: 2
N92014V: RNCC: 5 | RNVC: 2

5 Oct 1983

5340-12-357-8996
Hinge Torsion Bar

123578996
11220201: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-300-8425
Angle Bracket

123008425
4254310240: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-304-7891
Angle Bracket

123047891
2300107-310540: RNCC: 2 | RNVC: 2
2300107-310540: RNCC: 3 | RNVC: 2
2300107-310540: RNCC: 5 | RNVC: 9
2300107-310540: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-179-6966
Angle Bracket

121796966
4354261540: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-359-7118
Mounting Bracket

123597118
9495530040: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-345-9232
Webbing Strap

123459232
381 910 00 14: RNCC: 3 | RNVC: 2
3819100014: RNCC: 5 | RNVC: 2
381 910 00 14: RNCC: 5 | RNVC: 2

18 May 1998

5340-12-359-5850
Manual Control Handle

123595850
9445426940: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-12-394-1903
Mounting Bracket

123941903
L311M1603111: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-371-5662
Retaining Bail

123715662
2300525-970410.000.0: RNCC: 3 | RNVC: 2
1775724: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-382-5767
Rigid Caster

123825767
0.0.418.06: RNCC: 3 | RNVC: 2

12 Jul 2010

5340-12-324-0211
Friction Catch Stud Receptacle

123240211
52.2030.030.02: RNCC: 2 | RNVC: 2
52.2030.030.02: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-12-336-2615
Access Cover

123362615
1419 306 065: RNCC: 3 | RNVC: 2
1419306065: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-180-8571
Mending Plate

121808571
CU 402 898: RNCC: 2 | RNVC: 2
CU 402 898: RNCC: 3 | RNVC: 2
CU 402 898: RNCC: 5 | RNVC: 2
CU402898: RNCC: 5 | RNVC: 2
CU402898: RNCC: 5 | RNVC: 2
CU 402 898: RNCC: 5 | RNVC: 2
CU402898: RNCC: 5 | RNVC: 2

8 Oct 1979

5340-12-324-8804
Hinge Torsion Bar

123248804
2500171-442300.00: RNCC: 2 | RNVC: 2
2500171-442300.00: RNCC: 3 | RNVC: 2

4 Apr 1991

5340-12-183-7583
Handle Grip

121837583
183711891A01C: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-361-4928
Mounting Bracket

123614928
1504301: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-300-6753
Mending Plate

123006753
4359377311: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-382-3309
Mounting Bracket

123823309
3950040999: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-391-3497
Retaining Strap

123913497
26916367: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-367-2037
Dust And Moisture Seal Protective Cap

123672037
CBD32505P03: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-12-179-6981
Double Angle Bracket

121796981
4257900014: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-330-7859
Extension Drawer Slide Section

123307859
PG4001G028: RNCC: 3 | RNVC: 2
PG4001G028: RNCC: 5 | RNVC: 9

9 Feb 1993

5340-12-370-6217
Retaining Clip

123706217
0109886178: RNCC: 3 | RNVC: 2
010 988 61 78: RNCC: 5 | RNVC: 2

30 Nov 2006

5340-12-186-4441
Access Cover

121864441
83071050005: RNCC: 3 | RNVC: 2
1204209003: RNCC: 5 | RNVC: 2

30 Dec 1980

5340-12-311-6512
Dust And Moisture Seal Protective Plug

123116512
600B140: RNCC: 3 | RNVC: 2
GPN600B140: RNCC: 5 | RNVC: 2
600B140: RNCC: 5 | RNVC: 2
GPN600B140: RNCC: 5 | RNVC: 2

1 Oct 1987

5340-12-390-6123
Loop Clamp

123906123
313776: RNCC: 3 | RNVC: 2

28 Nov 2012

5340-12-323-7539
Filler Opening Cap

123237539
CF 472 831 AE: RNCC: 3 | RNVC: 2
CF 472 831 AE: RNCC: 5 | RNVC: 2

13 Dec 1990

5340-12-364-2659
Bow Handle

123642659
45.100.018: RNCC: 3 | RNVC: 9

4 Sep 2004

5340-12-196-2550
Angle Bracket

121962550
00923300: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-367-8356
Mounting Plate

123678356
5500783841: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-133-7788

5340-12-367-9890
Mounting Plate

123679890
10032: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-12-330-2053
Dust And Moisture Seal Protective Cap

123302053
272.362 567: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-12-040-6685

5340-12-180-1103
Plain Solid Disk

121801103
3826600055: RNCC: 3 | RNVC: 2

20 Aug 1979

5340-12-189-7594
Loop Clamp

121897594
PAN4270C24: RNCC: 3 | RNVC: 2
C900525: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-174-6840
Dust And Moisture Seal Protective Plug

121746840
0009972235: RNCC: 3 | RNVC: 2

19 Jul 1978

5340-12-372-0434
Mounting Bracket

123720434
S282M2013102: RNCC: 2 | RNVC: 2
S282M2013102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-010-3866

5340-12-196-8552
Dust And Moisture Seal Protective Cap

121968552
025-8636-014: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-317-6148
Double Angle Bracket

123176148
P-296819-063: RNCC: 3 | RNVC: 2
P296819-063: RNCC: 5 | RNVC: 2

21 Apr 1989

5340-12-383-9014
Retaining Bail

123839014
314 133 300 000: RNCC: 3 | RNVC: 2

20 Dec 2010

5340-12-199-4500
Mending Plate

121994500
8372030374: RNCC: 3 | RNVC: 2

26 Apr 1984

5340-12-355-0385
Mounting Bracket

123550385
5400049-669110.01: RNCC: 2 | RNVC: 2
5400049-669110.01: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-384-4588
Loop Clamp

123844588
1000007600740: RNCC: 3 | RNVC: 2
10025933: RNCC: 5 | RNVC: 2
S001301: RNCC: 5 | RNVC: 2
5340PL0962769: RNCC: 6 | RNVC: 9

24 Feb 2011

5340-12-377-3124
Loop Clamp

123773124
41231081: RNCC: 3 | RNVC: 2
41231081EZ: RNCC: 5 | RNVC: 2

7 Jan 2009

5340-12-123-4575
Retaining Strap

121234575
81974010039: RNCC: 3 | RNVC: 2
R5664: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-193-8723
Angle Bracket

121938723
5548756: RNCC: 3 | RNVC: 2
554.8756: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-375-0374
Dust And Moisture Seal Protective Plug

123750374
5560310033: RNCC: 3 | RNVC: 2

16 Apr 2008

5340-12-349-7842
Mending Plate

123497842
0044-602130B05B: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-125-1384

5340-12-300-9732
Access Cover

123009732
1000151-283000.01: RNCC: 2 | RNVC: 2
1000151-283000.01: RNCC: 3 | RNVC: 2

14 Sep 1984

5340-12-026-9475

5340-12-364-2428
Angle Bracket

123642428
4052611240: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-363-8826
Mechanical Stop

123638826
T531M0536202: RNCC: 3 | RNVC: 2

31 Jul 2004

5340-12-355-4595
Manual Control Handle

123554595
0007430272: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-12-357-1652
Mechanical Stop

123571652
184230302: RNCC: 2 | RNVC: 2
184230302: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-360-4118
Angle Bracket

123604118
3513634208: RNCC: 3 | RNVC: 2
3513634208: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-355-4014
Angle Bracket

123554014
4615404673: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-355-4007
Multiple Angle Bracket

123554007
4615404573: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-366-9717
Mounting Bracket

123669717
BD5.250.746.420: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-377-4332
Access Door Hinge

123774332
8605001.3.592.00: RNCC: 3 | RNVC: 2
8605001359200: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-12-338-2311
Protection Bellows

123382311
217.266.05: RNCC: 3 | RNVC: 2
21726605: RNCC: 5 | RNVC: 2
4.104.01: RNCC: 5 | RNVC: 9

8 Jun 1995

5340-12-301-5161
Metal Runner

123015161
1000163-371017.000.0: RNCC: 2 | RNVC: 2
1000163-371017.000.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-302-5530
Resilient Mount

123025530
YK03200818: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 20 0818: RNCC: 5 | RNVC: 9
03200818: RNCC: 5 | RNVC: 9

11 Jan 1985

5340-12-178-2136
Gurtgewebe- Riemen

5340-12-147-3420
Gurtgewebe- Riemen

5340-12-148-0945
Karabiner- Haken

5340-12-148-1269
Spann- Verschlusz

5340-12-148-6246
Tuer Griff

5340-12-148-7301
Treibstange Riegel

5340-12-355-1141
Manual Control Lever

123551141
130107: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-389-1668
Loop Clamp

123891668
921446: RNCC: 3 | RNVC: 2
921446: RNCC: 5 | RNVC: 2
07410316: RNCC: 5 | RNVC: 9

31 May 2012

5340-12-366-4460
Angle Bracket

123664460
4000004-990100.001: RNCC: 2 | RNVC: 2
4000004-990100.001: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-12-192-8960
Retaining Clip

121928960
4609930025: RNCC: 3 | RNVC: 2
721 1 72 052 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-301-7809
Catch Strike

123017809
4-69041: RNCC: 3 | RNVC: 2
268834: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-376-4414
Lock Key

123764414
208211: RNCC: 3 | RNVC: 2
7 032 240 013: RNCC: 5 | RNVC: 2

30 Sep 2008

5340-12-355-4838
Webbing Strap

123554838
9193.965.4: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-345-2838
Door Button

123452838
1602-208700.000.0: RNCC: 2 | RNVC: 2
1602-208700.000.0: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-12-314-5234
Mounting Bracket

123145234
CF 324 541 A: RNCC: 2 | RNVC: 2
CF 324 541 A: RNCC: 3 | RNVC: 2
CF 324 541 A: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-356-2374
Angle Bracket

123562374
4000A-930420.000.0: RNCC: 2 | RNVC: 2
4000A-930420.000.0: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-320-9193
Loop Clamp

123209193
0218 0382: RNCC: 3 | RNVC: 2
02180382EE0147-48: RNCC: 5 | RNVC: 2

6 Mar 1990

5340-12-301-2391
Mending Plate

123012391
4179261: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-369-3218
Strap Fastener Loop

123693218
0502 103: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-12-185-3926
Mounting Bracket

121853926
CF 407 165: RNCC: 3 | RNVC: 2
CF407165: RNCC: 3 | RNVC: 2
CF407165: RNCC: 5 | RNVC: 2
CF 407 165: RNCC: 5 | RNVC: 2
CF407165: RNCC: 5 | RNVC: 2

3 Oct 1980

5340-12-386-9460
Mortise Lock

123869460
1492.000: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-356-9278
Dust And Moisture Seal Protective Plug

123569278
735084020000: RNCC: 3 | RNVC: 2
20MTN5084: RNCC: 5 | RNVC: 2

17 Apr 2002

5340-12-315-8860
Angle Bracket

123158860
4604925441: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-394-6085
Mounting Plate

123946085
L282M5001206: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-12-197-2311
Ball Socket Seat

121972311
2020540016: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-363-7044
Mounting Bracket

123637044
T621P5002107: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-322-7588
Protection Bellows

123227588
8977546444: RNCC: 3 | RNVC: 2

19 Sep 1990

5340-12-311-8254
Mending Plate

123118254
03083: RNCC: 3 | RNVC: 2

20 Oct 1987

5340-12-175-1004
Nonmetallic Bumper

121751004
3817660097: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-349-1740
Strap Hinge

123491740
2300387-700860.003: RNCC: 2 | RNVC: 2
9914723: RNCC: 3 | RNVC: 2
2300387-700860.003: RNCC: 5 | RNVC: 9
9914723: RNCC: 5 | RNVC: 9

5 Oct 1999

5340-12-181-0521
Mending Plate

121810521
3313250104: RNCC: 3 | RNVC: 2
3313250104: RNCC: 5 | RNVC: 9

22 Oct 1979

5340-12-374-3911
Rim Lock

123743911
100228: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-363-3869
Mounting Plate

123633869
MP4103: RNCC: 3 | RNVC: 2

5 Jun 2004

5340-12-011-5828

5340-12-310-2774
Metal Runner

123102774
409026595: RNCC: 3 | RNVC: 2
409.026595: RNCC: 5 | RNVC: 2

4 May 1987

5340-12-305-0308
Loop Clamp

123050308
141335: RNCC: 3 | RNVC: 2
420580330700: RNCC: 5 | RNVC: 2
0008110239: RNCC: 5 | RNVC: 2

19 Sep 1985

5340-12-322-7228
Manual Control Handle

123227228
926786777: RNCC: 3 | RNVC: 2

17 Sep 1990

5340-12-303-1003
Shimmy Damper

123031003
021129103: RNCC: 3 | RNVC: 9

25 Feb 1985

5340-12-358-9588
Bridge Clamp

123589588
8909990042: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-375-8244
Loop Clamp

123758244
29917A: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-313-1638
Access Cover

123131638
1071643: RNCC: 2 | RNVC: 2
1071643: RNCC: 3 | RNVC: 2

9 Mar 1988

5340-12-185-3870
Manual Control Handle

121853870
A125XM16GALCD6: RNCC: 3 | RNVC: 2
A125XM16GALCD6: RNCC: 5 | RNVC: 2

3 Oct 1980

5340-12-199-8013
Angle Bracket

121998013
5802017-600480.01: RNCC: 2 | RNVC: 2
5802017-600480.01: RNCC: 3 | RNVC: 2

31 May 1984

5340-12-390-0858
Bumper

123900858
S252M3360211: RNCC: 3 | RNVC: 2

2 Oct 2012

Load More Results