What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 8 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 8 of 178

5340-12-394-4403
Turnbuckle

123944403
29E2440043: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-406-4330
Mounting Plate

5340-12-407-1574
Spring Tension Clip

5340-12-360-9623
Access Cover

123609623
5370160233: RNCC: 3 | RNVC: 2

31 Jul 2003

5340-12-363-8340
Plain Solid Disk

123638340
04202127: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-12-370-8706
Access Cover

123708706
0770949: RNCC: 3 | RNVC: 2
909417311: RNCC: 5 | RNVC: 2

11 Jan 2007

5340-12-370-9564
Bow Handle

123709564
869141902: RNCC: 3 | RNVC: 2
86 914 1902: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-12-371-0039
Mounting Bracket

123710039
867007101: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-12-370-8667
Access Cover

123708667
864021001: RNCC: 2 | RNVC: 2
864021001: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-12-376-3821
Spring Tension Clip

123763821
X130-35L: RNCC: 3 | RNVC: 2
15349: RNCC: 5 | RNVC: 2

22 Sep 2008

5340-12-386-3477
Dust And Moisture Seal Protective Cap

123863477
5.132-011.0: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-12-391-5923
Padlock

123915923
6455716: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-12-389-1294
Utility Resilient Mount

123891294
267919: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-389-1305
Mounting Bracket

123891305
271008-E: RNCC: 3 | RNVC: 2
271008: RNCC: 3 | RNVC: 9

30 May 2012

5340-12-409-4821
Door Handle

5340-12-179-7652
Rod End Clevis

121797652
027076601: RNCC: 3 | RNVC: 2
F70919070012: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-300-6670
Double Angle Bracket

123006670
4355410511: RNCC: 3 | RNVC: 2
435 541 05 11: RNCC: 5 | RNVC: 2

22 Aug 1984

5340-12-305-0210
Double Angle Bracket

123050210
0241 8653: RNCC: 3 | RNVC: 2
0241 8653: RNCC: 5 | RNVC: 2
02418653ED0148-11: RNCC: 5 | RNVC: 2
2418653: RNCC: 5 | RNVC: 2
4070820: RNCC: 5 | RNVC: 2
241-8653: RNCC: 5 | RNVC: 9

18 Sep 1985

5340-12-305-1299
Loop Clamp

123051299
0224 2948: RNCC: 3 | RNVC: 2
02242948EE0148-44: RNCC: 5 | RNVC: 2

1 Oct 1985

5340-12-310-3955
Door Handle

123103955
1000-U9: RNCC: 3 | RNVC: 2
0.26.1708.0: RNCC: 3 | RNVC: 2
200-9319: RNCC: 3 | RNVC: 2
1000-U9: RNCC: 5 | RNVC: 2
1000-U9: RNCC: 5 | RNVC: 2
12839/12707 ITEM 59: RNCC: 5 | RNVC: 2
23341-6020-000: RNCC: 5 | RNVC: 2
570339977: RNCC: 5 | RNVC: 2

19 May 1987

5340-12-311-7250
Clamping Catch

123117250
V917L01-1Y1AG: RNCC: 3 | RNVC: 2
17L01-1Y2AA: RNCC: 5 | RNVC: 2
17L01Y2AA: RNCC: 5 | RNVC: 2
030667: RNCC: 5 | RNVC: 2
V917L01-1Y1AG: RNCC: 5 | RNVC: 2

12 Oct 1987

5340-12-314-0989
Dust And Moisture Seal Protective Plug

123140989
NO PRIMARY REF 12-314-0989: RNCC: 3 | RNVC: 2
909734150: RNCC: 5 | RNVC: 2
5RKN457/01: RNCC: 5 | RNVC: 9

7 Jun 1988

5340-12-311-8996
Nonmetallic Bumper

123118996
1-214-071-3335: RNCC: 3 | RNVC: 2
0009889110: RNCC: 5 | RNVC: 2
1-214-071-3335: RNCC: 5 | RNVC: 9

28 Oct 1987

5340-12-318-9298
Detent Plunger

123189298
DIN6311-S40: RNCC: 2 | RNVC: 2
DIN6311-S40: RNCC: 3 | RNVC: 2
07140-20: RNCC: 5 | RNVC: 2
714 20: RNCC: 5 | RNVC: 2
NLM71420: RNCC: 5 | RNVC: 2

25 Aug 1989

5340-12-322-7570
Metallic Solid Wheel

123227570
5200.230.111.000: RNCC: 3 | RNVC: 2
0525400: RNCC: 5 | RNVC: 2
192-4-000147: RNCC: 5 | RNVC: 2
5200.230.111.000: RNCC: 5 | RNVC: 9
5200.230.111.000.4: RNCC: 5 | RNVC: 9
52002301110004: RNCC: 5 | RNVC: 9

19 Sep 1990

5340-12-325-1206
Angle Bracket

123251206
0224 9331: RNCC: 3 | RNVC: 2
1441837: RNCC: 5 | RNVC: 2
02249331ED0148-48: RNCC: 5 | RNVC: 2

6 May 1991

5340-12-336-9889
Dust And Moisture Seal Protective Plug

123369889
0242 3478: RNCC: 3 | RNVC: 2
571286377: RNCC: 5 | RNVC: 2
280.14.0254: RNCC: 5 | RNVC: 2
02423478ES8928-73: RNCC: 5 | RNVC: 2
H2873-Q40X4,5-MVQ-3-60: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-345-9130
Mounting Plate

123459130
160.31.0210: RNCC: 3 | RNVC: 2

15 May 1998

5340-12-345-9194
Mounting Plate

123459194
160.19.0017: RNCC: 3 | RNVC: 2

18 May 1998

5340-12-346-0141
Loop Clamp

123460141
H3223-C10X20-ST/MVQ-1-70: RNCC: 3 | RNVC: 2
0117 5806: RNCC: 5 | RNVC: 2
280.14.0237: RNCC: 5 | RNVC: 2

29 May 1998

5340-12-346-0139
Loop Clamp

123460139
DIN71555-114,5: RNCC: 2 | RNVC: 2
0113 9533: RNCC: 5 | RNVC: 2

29 May 1998

5340-12-347-4869
Mounting Bracket

123474869
5220.230.201.000: RNCC: 3 | RNVC: 2
5220.230.201.000: RNCC: 5 | RNVC: 2

16 Dec 1998

5340-12-346-2423
Spring Tension Clip

123462423
251728010010: RNCC: 3 | RNVC: 2
251728010010: RNCC: 5 | RNVC: 2

2 Jul 1998

5340-12-351-7012
Access Cover

123517012
6301.150.000.079: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-12-352-8742
Loop Clamp

123528742
555.164.2: RNCC: 3 | RNVC: 2

27 Dec 2000

5340-12-356-5117
Manual Control Lever

123565117
024015002: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-356-6959
Mounting Bracket

123566959
027517701: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-358-0089
Metallic Bumper

123580089
867013805: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-359-3468
Mounting Bracket

123593468
869107101: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-362-0725
Loop Clamp

123620725
DIN3015-S-KP-1-R-18-AL: RNCC: 2 | RNVC: 2
RCA-118: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-143-8872
Helical Compression Spring Retainer

121438872
0026-1286-110: RNCC: 3 | RNVC: 2
0026-1286-0110: RNCC: 5 | RNVC: 2
WSN26-56-00ITEM8: RNCC: 5 | RNVC: 2
0026-1286-0110: RNCC: 5 | RNVC: 9
0026-1286-110: RNCC: 5 | RNVC: 9
WSN26-56-00ITEM8: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-9227
Nonmetallic Bumper

121789227
5370780038: RNCC: 2 | RNVC: 2
5370780038: RNCC: 3 | RNVC: 2
5370780038: RNCC: 5 | RNVC: 2
5370780038: RNCC: 5 | RNVC: 2
537 078 00 38: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-179-6963
Loop Clamp

121796963
NO PRIMARY REF 12-179-6963: RNCC: 3 | RNVC: 2
6034280184: RNCC: 5 | RNVC: 2
3660780086: RNCC: 5 | RNVC: 2
6034280184: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-12-191-4197
Bow Handle

121914197
54.2895.002.90: RNCC: 3 | RNVC: 2
54-2895-002-90: RNCC: 5 | RNVC: 2

2 Feb 1982

5340-12-300-4963
Electrical-Mechanical Equipment Post

123004963
VG95148C7XM4X20-ST: RNCC: 2 | RNVC: 2
5.14.201: RNCC: 3 | RNVC: 2
VG95148C7XM4X20-ST: RNCC: 3 | RNVC: 2
011/000020-002.9: RNCC: 3 | RNVC: 2
ENINT7-20: RNCC: 3 | RNVC: 2
ZDB420: RNCC: 5 | RNVC: 2
ENINT7-20 MM: RNCC: 5 | RNVC: 2
DIBO-M4/20: RNCC: 5 | RNVC: 2
040.15.0043: RNCC: 5 | RNVC: 2

8 Aug 1984

5340-12-302-5182
Nonmetallic Bumper

123025182
1-213-064-3060: RNCC: 3 | RNVC: 9
0003233144: RNCC: 5 | RNVC: 2

9 Jan 1985

5340-12-304-7507
Dust And Moisture Seal Protective Plug

123047507
0241 9084: RNCC: 3 | RNVC: 2
4073970: RNCC: 5 | RNVC: 2
K0.0241-9084: RNCC: 5 | RNVC: 2
K0002419084: RNCC: 5 | RNVC: 2
571284677: RNCC: 5 | RNVC: 2
02419084EZ0148-20: RNCC: 5 | RNVC: 2

19 Aug 1985

5340-12-311-4597
Dust And Moisture Seal Protective Plug

123114597
5.092-015.0: RNCC: 3 | RNVC: 2
5.092-015: RNCC: 5 | RNVC: 9

4 Sep 1987

5340-12-315-1219
Access Cover

123151219
4030150109: RNCC: 3 | RNVC: 2
15010113: RNCC: 5 | RNVC: 2
403 015 01 09: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-316-5925
Double Angle Bracket

123165925
0242 0018: RNCC: 3 | RNVC: 2
2420018EE0148-17: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-323-9441
Webbing Strap

123239441
C42123-A16-A5: RNCC: 2 | RNVC: 2
10006000: RNCC: 3 | RNVC: 2
C42123-A16-A5: RNCC: 5 | RNVC: 2
020.02.0006: RNCC: 5 | RNVC: 2
000-A2-25X2,0X600-PE-RAL6031: RNCC: 6 | RNVC: 9

10 Jan 1991

5340-12-340-6572
Protection Bellows

123406572
V0 40 KE: RNCC: 3 | RNVC: 2
V040KE: RNCC: 5 | RNVC: 2
PL E 7/2 P-30: RNCC: 5 | RNVC: 2
V040KE (IDVCS065-117.895): RNCC: 5 | RNVC: 2

21 May 1996

5340-12-345-9765
Access Cover

123459765
08836: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-345-9214
Multiple Angle Bracket

123459214
160.31.0156: RNCC: 3 | RNVC: 2

18 May 1998

5340-12-348-3145
Access Cover

123483145
6300.150.021.004: RNCC: 3 | RNVC: 2

28 May 1999

5340-12-351-0372
Angle Bracket

123510372
5.018-273: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-351-8773
Angle Bracket

123518773
923.823.4: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-12-356-6970
Friction Catch Stud Receptacle

123566970
027017204: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6978
Manual Control Lever

123566978
027511902: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-358-0091
Metallic Bumper

123580091
867013804: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-163-3212
Expansion Plug

121633212
4039970920: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-165-2863
Expansion Plug

121652863
0116 5835: RNCC: 3 | RNVC: 2
1165835EF8928-60: RNCC: 5 | RNVC: 2
B35H711: RNCC: 5 | RNVC: 2
K0.00116-5835: RNCC: 5 | RNVC: 2
K0001165835: RNCC: 5 | RNVC: 2
1165835: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-7853
Dust And Moisture Seal Protective Plug

121657853
0117 2794: RNCC: 3 | RNVC: 2
571286777: RNCC: 5 | RNVC: 2
4083750: RNCC: 5 | RNVC: 2
0116 9032: RNCC: 5 | RNVC: 2
4797249: RNCC: 5 | RNVC: 2
1H14X18X8H7565: RNCC: 5 | RNVC: 9
1172794: RNCC: 5 | RNVC: 9
1169032: RNCC: 5 | RNVC: 9
1169032EF8975-65: RNCC: 5 | RNVC: 9
1172794EE8975-65: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-170-8977
Dust And Moisture Seal Protective Plug

121708977
133955435: RNCC: 3 | RNVC: 9
0008242599: RNCC: 5 | RNVC: 2
908.014: RNCC: 5 | RNVC: 2

19 Aug 1977

5340-12-173-6199
Nonmetallic Bumper

121736199
TS362/101/0460-FHNN7090: RNCC: 3 | RNVC: 2
TS362-101-0460: RNCC: 5 | RNVC: 2
4063220044: RNCC: 5 | RNVC: 2
4063220044: RNCC: 5 | RNVC: 2

26 Apr 1978

5340-12-321-5035
Angle Bracket

123215035
160.03.0004: RNCC: 2 | RNVC: 2
160.03.0004: RNCC: 3 | RNVC: 2

25 May 1990

5340-12-323-9439
Handle Grip

123239439
1000-U138: RNCC: 3 | RNVC: 2
200-9125: RNCC: 3 | RNVC: 2
0.24.2107.0: RNCC: 3 | RNVC: 2
040.09.0039: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-324-4156
Flush Lock

123244156
0.32.0102.4: RNCC: 3 | RNVC: 2
0.32.102.4: RNCC: 5 | RNVC: 2

14 Feb 1991

5340-12-325-1390
Uti Resilient Mount

123251390
DIN95361-150X100-NR40ST: RNCC: 2 | RNVC: 2
800055-15.NR40.ST: RNCC: 5 | RNVC: 2
80005504: RNCC: 5 | RNVC: 2
80005504: RNCC: 5 | RNVC: 2
58394BSTN4090: RNCC: 5 | RNVC: 2
VG95361-150X100-NR40ST: RNCC: 5 | RNVC: 9
F58394 40SH: RNCC: 5 | RNVC: 9

7 May 1991

5340-12-345-5831
Mounting Plate

123455831
160.32.0031: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-345-5880
Multiple Angle Bracket

123455880
160.03.0017: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-343-6863
Loop Clamp

123436863
10052: RNCC: 3 | RNVC: 2

15 Jul 1997

5340-12-336-9891
Dust And Moisture Seal Protective Plug

123369891
300F5-RAL9005: RNCC: 3 | RNVC: 2
F5 SCHWARZ: RNCC: 5 | RNVC: 2
571286577: RNCC: 5 | RNVC: 2
280.14.0255: RNCC: 5 | RNVC: 2
0117 5750: RNCC: 5 | RNVC: 2
H2873-E10,7X5,5-PE WEICH-SW: RNCC: 5 | RNVC: 2
01175750ES8928-73: RNCC: 5 | RNVC: 2
300F5 SCHWARZ: RNCC: 5 | RNVC: 9
GPN300F5 SCHWARZ: RNCC: 5 | RNVC: 9
300F5-SW: RNCC: 5 | RNVC: 9

5 Jan 1995

5340-12-346-0164
Loop Clamp

123460164
310094: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-347-5730
Turnbuckle

123475730
5221.230.207.000: RNCC: 3 | RNVC: 2
192-3-005458: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-351-7009
Access Cover

123517009
6301.150.000.058: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-12-350-9198
Mounting Bracket

123509198
4.038-170: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-12-351-8661
Manual Control Handle

123518661
E515.401.4: RNCC: 3 | RNVC: 2

5 Sep 2000

5340-12-357-4718
Metallic Bumper

123574718
027010386: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-12-358-0101
Manual Control Handle

123580101
864005001: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-300-3541
Verbindungsstueck

123003541
1201442: RNCC: 3 | RNVC: 2
E/UK: RNCC: 5 | RNVC: 2
63210100: RNCC: 5 | RNVC: 2
1075837: RNCC: 5 | RNVC: 2
3210/100: RNCC: 5 | RNVC: 9
FT6100131-139: RNCC: 5 | RNVC: 9

26 Jul 1984

5340-12-304-5934
Helical Compression Spring Seat

123045934
0414 3508: RNCC: 3 | RNVC: 2
571272877: RNCC: 5 | RNVC: 2
4070600: RNCC: 5 | RNVC: 2
04143508EC0148-08: RNCC: 5 | RNVC: 2
4792690: RNCC: 5 | RNVC: 2
909578037: RNCC: 5 | RNVC: 2
414-3508: RNCC: 5 | RNVC: 9

2 Aug 1985

5340-12-314-8017
Dust And Moisture Seal Protective Plug

123148017
0117 4489: RNCC: 3 | RNVC: 2
01174489EE8975-65: RNCC: 5 | RNVC: 2
H7565-4H37X2X40: RNCC: 5 | RNVC: 2

11 Aug 1988

5340-12-321-8736
Compression Cup

123218736
0002040479: RNCC: 3 | RNVC: 2
0002040479: RNCC: 5 | RNVC: 2
0002040479: RNCC: 5 | RNVC: 2
000 204 04 79: RNCC: 5 | RNVC: 2

5 Jul 1990

5340-12-322-8073
Resilient Mount

123228073
00921400: RNCC: 3 | RNVC: 2

24 Sep 1990

5340-12-323-9419
Door Button

123239419
200-0522: RNCC: 3 | RNVC: 2
1000-179: RNCC: 3 | RNVC: 2
0.24.0531.0: RNCC: 3 | RNVC: 2
060.15.0001: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-323-9420
Flush Lock

123239420
200-9043: RNCC: 3 | RNVC: 2
1000-U134: RNCC: 3 | RNVC: 2
0.29.6003.0: RNCC: 3 | RNVC: 2
125.09.0001: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-325-3601
Electrical-Mechanical Equipment Post

123253601
VG95148C8XM5X30-ST: RNCC: 2 | RNVC: 2
VG95148C8XM5X30-ST: RNCC: 3 | RNVC: 2
5.15.301: RNCC: 3 | RNVC: 2
515301: RNCC: 5 | RNVC: 2
040.15.0037: RNCC: 5 | RNVC: 2

28 May 1991

5340-12-345-9215
Angle Bracket

123459215
160.03.0003: RNCC: 3 | RNVC: 2

18 May 1998

5340-12-345-9766
Access Cover

123459766
310.18.0022: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-346-1470
Support Hook

123461470
0224 4424: RNCC: 3 | RNVC: 2
2244424EE0148-27: RNCC: 5 | RNVC: 2

18 Jun 1998

5340-12-346-1471
Access Cover

123461471
0418 6447: RNCC: 3 | RNVC: 2
280.14.0305: RNCC: 5 | RNVC: 2

18 Jun 1998

5340-12-347-0769
Butt Hinge

123470769
320.09.0006: RNCC: 3 | RNVC: 2
320.09.0006: RNCC: 5 | RNVC: 2
TKZ 320.09.0006: RNCC: 5 | RNVC: 9

22 Oct 1998

5340-12-347-0770
Butt Hinge

123470770
320.09.0007: RNCC: 3 | RNVC: 2
320.09.0007: RNCC: 5 | RNVC: 2
TKZ 320.09.0007: RNCC: 5 | RNVC: 9

22 Oct 1998

5340-12-347-2603
Angle Bracket

123472603
5200.230.057.000: RNCC: 3 | RNVC: 2
192-3-000130: RNCC: 5 | RNVC: 2
5200.230.057.000: RNCC: 5 | RNVC: 2

18 Nov 1998

5340-12-351-7010
Access Cover

123517010
6301.150.000.064: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-12-351-8771
Seal Retaining Plate

123518771
917.257.4: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-12-355-5651
Mounting Plate

123555651
1043 326 045: RNCC: 3 | RNVC: 2
15009744: RNCC: 5 | RNVC: 2
1043326045: RNCC: 5 | RNVC: 9

26 Nov 2001

5340-12-356-6960
Mounting Bracket

123566960
027517702: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-357-5487
Barrel Bolt

123575487
0001321410: RNCC: 3 | RNVC: 2
548172: RNCC: 5 | RNVC: 2

1 Jul 2002

5340-12-357-7991
Mounting Bracket

123577991
862904306: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-359-3446
Headless Straight Rod

123593446
867018902: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-171-2845
Loop Clamp

121712845
SP8213.192/20SKZ: RNCC: 3 | RNVC: 2
102062192209: RNCC: 5 | RNVC: 2
102062192209: RNCC: 5 | RNVC: 2
1518213192: RNCC: 5 | RNVC: 2
SP8213-192-20SKZ: RNCC: 5 | RNVC: 2

26 Sep 1977

5340-12-181-2998
Dust And Moisture Seal Protective Plug

121812998
HK040CK11-111: RNCC: 3 | RNVC: 2
4ATE N14471: RNCC: 5 | RNVC: 2
21161-9-504: RNCC: 5 | RNVC: 2
0287 3610: RNCC: 5 | RNVC: 2
2873610: RNCC: 5 | RNVC: 2
2873610EZ8928-63: RNCC: 5 | RNVC: 2
41.4901-0040.0: RNCC: 5 | RNVC: 2

12 Nov 1979

5340-12-196-3161
Access Cover

121963161
917.150.4: RNCC: 3 | RNVC: 2

27 Jun 1983

5340-12-307-4232
Electrical-Mechanical Equipment Post

123074232
VG95148C5,5XM3X10-ST: RNCC: 2 | RNVC: 2
18H172: RNCC: 3 | RNVC: 2
5.13.101: RNCC: 3 | RNVC: 2
5.13.104: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X10-ST: RNCC: 3 | RNVC: 2
00204: RNCC: 5 | RNVC: 2
V5737/A: RNCC: 5 | RNVC: 2
SP02345: RNCC: 5 | RNVC: 2
00.4.005.0061: RNCC: 5 | RNVC: 9

18 Jun 1986

5340-12-312-4088
Uti Resilient Mount

123124088
741 614 S1: RNCC: 3 | RNVC: 2
845.741614S1: RNCC: 3 | RNVC: 2
741614S1: RNCC: 5 | RNVC: 2
4168900003: RNCC: 5 | RNVC: 2

29 Dec 1987

5340-12-183-9029
Retaining Clip

121839029
DIN71805-S13-A2I: RNCC: 2 | RNVC: 2
DIN71805-S13-A2I: RNCC: 3 | RNVC: 2
548182: RNCC: 5 | RNVC: 2
071805016402: RNCC: 5 | RNVC: 2
S13DIN71805A2I: RNCC: 5 | RNVC: 2
071805013402: RNCC: 5 | RNVC: 9
071805013403: RNCC: 5 | RNVC: 9

29 May 1980

5340-12-312-7253
Uti Resilient Mount

123127253
845.741977S2: RNCC: 3 | RNVC: 2
741977S2: RNCC: 3 | RNVC: 2
4168900601: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-321-9743
Loop Clamp

123219743
DIN3015-Z-KP-1-R-8-8-PP: RNCC: 2 | RNVC: 2
108/08PA: RNCC: 3 | RNVC: 2
HRZ1KP8-8PP: RNCC: 3 | RNVC: 2
RBNR-108/8: RNCC: 3 | RNVC: 2
RBNR-108/8: RNCC: 5 | RNVC: 2
DIN3015-ZKP1R-8-8PP: RNCC: 5 | RNVC: 2
945314: RNCC: 5 | RNVC: 2

13 Jul 1990

5340-12-317-2253
Turnbuckle Body

123172253
DIN1479-SPM20-X10CRNITI189: RNCC: 2 | RNVC: 2
5500020S-X10CRNITI189: RNCC: 3 | RNVC: 2
935983: RNCC: 5 | RNVC: 2

17 Mar 1989

5340-12-344-7725
Spring Holder

123447725
5590350274: RNCC: 3 | RNVC: 2
559 035 02 74: RNCC: 5 | RNVC: 2

8 Dec 1997

5340-12-345-7678
Access Cover

123457678
310.18.0046: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-12-346-1542
Turnbuckle Body

123461542
DIN1479-SPM6-6-A4C: RNCC: 2 | RNVC: 2
0111 5358: RNCC: 5 | RNVC: 2

19 Jun 1998

5340-12-347-2469
Ball Socket Seat

123472469
5080610084: RNCC: 3 | RNVC: 2
M033621/00DE ITEM 070070: RNCC: 5 | RNVC: 2
508 061 00 84: RNCC: 5 | RNVC: 2

17 Nov 1998

5340-12-346-0167
Retaining Band

123460167
0117 6435: RNCC: 3 | RNVC: 2
0117 6435: RNCC: 5 | RNVC: 2

29 May 1998

5340-12-351-0953
Access Cover

123510953
251728010013: RNCC: 3 | RNVC: 2
251728010013: RNCC: 5 | RNVC: 2

26 Jun 2000

5340-12-352-8725
Helical Compression Spring Seat

123528725
531.009.4: RNCC: 3 | RNVC: 2

27 Dec 2000

5340-12-356-5790
Access Cover

123565790
027001001: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-12-356-6359
Turnbuckle Body

123566359
935982: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-356-6957
Rim Latch

123566957
027516201: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6974
Spacing Threaded Standoff

123566974
027016001: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-357-7987
Mounting Bracket

123577987
866406105: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-359-9508
Nonmetallic Bumper

123599508
741388MITTEL: RNCC: 3 | RNVC: 2
741388: RNCC: 5 | RNVC: 2

24 Mar 2003

5340-12-362-0357
Webbing Strap

123620357
027513803: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-12-177-0711
Clamping Catch

121770711
136.204: RNCC: 3 | RNVC: 2
E1016-1600-0201: RNCC: 5 | RNVC: 2
3095261: RNCC: 5 | RNVC: 2
7-253-0247: RNCC: 5 | RNVC: 2
3095-261: RNCC: 5 | RNVC: 2
160.10.0024: RNCC: 5 | RNVC: 2
136-204: RNCC: 5 | RNVC: 9

12 Jan 1979

5340-12-179-6964
Loop Clamp

121796964
K587-4: RNCC: 3 | RNVC: 2
4354280084: RNCC: 5 | RNVC: 2
4354280084: RNCC: 5 | RNVC: 2
4354280084: RNCC: 5 | RNVC: 2
4354280084: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-12-189-0589
Detent Plunger

121890589
2500075-321600.04.0: RNCC: 2 | RNVC: 2
2500075-321600.04.0: RNCC: 3 | RNVC: 2
2500075-321600.04.0: RNCC: 5 | RNVC: 9
2500075-321600-04-0: RNCC: 5 | RNVC: 9
2500075-321600-04-0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-199-5103
Surface Bolt

121995103
TL-05-100-07: RNCC: 3 | RNVC: 2
LS100A: RNCC: 5 | RNVC: 2
LS100A: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-311-8522
Double Angle Bracket

123118522
0414 4990: RNCC: 3 | RNVC: 2
414 4990: RNCC: 5 | RNVC: 2
4144990ED0148-22: RNCC: 5 | RNVC: 2

22 Oct 1987

5340-12-321-4072
Quick Release Plunger

123214072
GN615-M16-KN: RNCC: 3 | RNVC: 2
2205.416: RNCC: 3 | RNVC: 2
03010-16: RNCC: 3 | RNVC: 2
1609.16: RNCC: 3 | RNVC: 2
5340001700: RNCC: 5 | RNVC: 2
KN-M16-HWN205S: RNCC: 5 | RNVC: 2
KNM16HWN205S: RNCC: 5 | RNVC: 9
NLM3010-16: RNCC: 5 | RNVC: 9
NLM301-16: RNCC: 5 | RNVC: 9

16 May 1990

5340-12-330-8235
Access Cover

123308235
6.646-046.0: RNCC: 3 | RNVC: 2
6.646-046: RNCC: 5 | RNVC: 9

12 Feb 1993

5340-12-341-6827
Helical Compression Spring Seat

123416827
5080611718: RNCC: 3 | RNVC: 2
508 061 17 18: RNCC: 5 | RNVC: 2
M033621/00DE ITEM 070190: RNCC: 5 | RNVC: 9
M033621/00DE SH 64 C/N 04: RNCC: 5 | RNVC: 9

15 Oct 1996

5340-12-345-9918
Runner

123459918
08831: RNCC: 3 | RNVC: 2

27 May 1998

5340-12-347-4349
Lock-Release Lever

123474349
192-2-005361: RNCC: 3 | RNVC: 2
5221.230.059.000: RNCC: 5 | RNVC: 2

10 Dec 1998

5340-12-347-3187
Retaining Strap

123473187
5221.230.130.160: RNCC: 3 | RNVC: 2

26 Nov 1998

5340-12-347-5738
Rod End Clevis

123475738
192-3-005446: RNCC: 3 | RNVC: 2
5221.230.130.090: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-351-8772
Loop Clamp

123518772
922.077.2: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-12-356-9403
Manual Control Lever

123569403
027009504: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-357-0040
Angle Bracket

123570040
027511709: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-357-5373
Manual Control Lever

123575373
4946089: RNCC: 3 | RNVC: 2
4005.124.80.03.003: RNCC: 5 | RNVC: 2

1 Jul 2002

5340-12-358-0087
Mounting Bracket

123580087
867017102: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-357-7997
Nonmetallic Bumper

123577997
909743201: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-358-0185
Mounting Bracket

123580185
862104301: RNCC: 2 | RNVC: 2
862104301: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-12-359-3447
Lock-Release Lever

123593447
867007701: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-359-3964
Access Cover

123593964
027010357: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-12-362-0724
Loop Clamp

123620724
DIN3015-S-KP-1-R-13,5-AL: RNCC: 2 | RNVC: 2
RCA-113,5: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-173-4731
Loop Clamp

121734731
191253139H: RNCC: 3 | RNVC: 9

18 Apr 1978

5340-12-177-8999
Dust And Moisture Seal Protective Plug

121778999
300F22: RNCC: 3 | RNVC: 2
F22: RNCC: 5 | RNVC: 2
M4ZS460D1739: RNCC: 5 | RNVC: 2
GPN300F22: RNCC: 5 | RNVC: 2
300002200: RNCC: 5 | RNVC: 9
F22: RNCC: 5 | RNVC: 9
F22GPN300: RNCC: 5 | RNVC: 9
GPN300,F22: RNCC: 5 | RNVC: 9

7 Mar 1979

5340-12-165-2867
Expansion Plug

121652867
0240 3129: RNCC: 3 | RNVC: 2
4060170: RNCC: 5 | RNVC: 2
VDPM00150: RNCC: 5 | RNVC: 2
2403129EE0147-01: RNCC: 5 | RNVC: 2
2403129: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-6881
Uti Resilient Mount

121806881
0118 061/102: RNCC: 3 | RNVC: 2
0002410050: RNCC: 5 | RNVC: 2
0002410050: RNCC: 5 | RNVC: 2
0118061.15: RNCC: 5 | RNVC: 2
0118061/102.4: RNCC: 5 | RNVC: 2
0118061-102-4: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-305-8838
Bow Handle

123058838
2DG170: RNCC: 3 | RNVC: 2
4068150036: RNCC: 5 | RNVC: 2
4068150036: RNCC: 5 | RNVC: 2

2 Jan 1986

5340-12-312-8842
Uti Resilient Mount

123128842
DIN95363-B60X45-NR45ST-M10X20: RNCC: 2 | RNVC: 2
81110-60X45-M10X20.NR45.ST: RNCC: 5 | RNVC: 2
1.60.45.3.45NR/ST-M10X20: RNCC: 5 | RNVC: 2
5218274/11MN45: RNCC: 5 | RNVC: 2
909742007: RNCC: 5 | RNVC: 2
VG95363-B60X45-NR45ST-M10X20: RNCC: 5 | RNVC: 9

16 Feb 1988

5340-12-316-5926
Dust And Moisture Seal Protective Cap

123165926
0121 4710: RNCC: 3 | RNVC: 2
1214710EE8928-70: RNCC: 5 | RNVC: 2
1120524001: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-322-4544
Spring Tension Clip

123224544
181-55800: RNCC: 3 | RNVC: 2

23 Aug 1990

5340-12-323-9440
Door Button

123239440
1000-225: RNCC: 3 | RNVC: 2
200-0514: RNCC: 3 | RNVC: 2
0.24.0541.0: RNCC: 3 | RNVC: 2
060.15.0002: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-343-3990
Helical Compression Spring Retainer

123433990
5080611850: RNCC: 3 | RNVC: 2
508 061 18 50: RNCC: 5 | RNVC: 2
M033621/00DE ITEM 070064: RNCC: 5 | RNVC: 2
M033621/00DE SH 59 C/N 03: RNCC: 5 | RNVC: 2

16 Jun 1997

5340-12-345-5731
Spacing Threaded Standoff

123455731
68.31.701: RNCC: 3 | RNVC: 2
040.15.0068: RNCC: 5 | RNVC: 2
69.51.018: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-12-346-0138
Rod End Connector

123460138
160.40.0006: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-346-0161
Loop Clamp

123460161
310695: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-348-3143
Support Hook

123483143
6300.150.300.072: RNCC: 3 | RNVC: 2

28 May 1999

5340-12-347-5703
Dust And Moisture Seal Protective Cap

123475703
192-3-005440: RNCC: 3 | RNVC: 2
5221.230.130.060: RNCC: 5 | RNVC: 2

8 Jan 1999

5340-12-351-0368
Mounting Bracket

123510368
5.042-375: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-351-0367
Mounting Bracket

123510367
5.042-374: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-352-2406
Utility Access Door

123522406
485.01.0020: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-12-356-6956
Turnbuckle Body

123566956
DIN1479-SP-M24-ST-A3P: RNCC: 2 | RNVC: 2
116602: RNCC: 5 | RNVC: 2

26 Mar 2002

5340-12-356-6963
Mounting Bracket

123566963
027517601: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6985
Rod End Clevis

123566985
027511311: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-357-3703
Lock-Release Lever

123573703
027013402: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-12-359-4862
Dust And Moisture Seal Protective Cap

123594862
0009974320: RNCC: 3 | RNVC: 2
15010362: RNCC: 5 | RNVC: 2
A0009974320: RNCC: 5 | RNVC: 9

10 Feb 2003

5340-12-165-2879
Loop Clamp

121652879
0240 5859: RNCC: 3 | RNVC: 2
571261277: RNCC: 5 | RNVC: 2
4060420: RNCC: 5 | RNVC: 2
2405859: RNCC: 5 | RNVC: 2
2405859EE0147-08: RNCC: 5 | RNVC: 2
4796928: RNCC: 5 | RNVC: 2
0147-08E2405859: RNCC: 5 | RNVC: 2
VDPM00161: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-169-7923
Expansion Plug

121697923
4039970620: RNCC: 3 | RNVC: 2

10 Jun 1977

5340-12-187-8938
Casement Fastener

121878938
4067520050: RNCC: 3 | RNVC: 2
406 752 00 50: RNCC: 5 | RNVC: 2

18 May 1981

5340-12-189-0591
Detent Plunger

121890591
2500075-321800.16.0: RNCC: 2 | RNVC: 2
2500075-321800.16.0: RNCC: 3 | RNVC: 2
2500075-321800-16-0: RNCC: 5 | RNVC: 9
2500075-321800.16.0: RNCC: 5 | RNVC: 9
2500075-321800-16-0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-315-0665
Loop Clamp

123150665
DIN3016-D1-10X15-W1-2 MVQ1-70: RNCC: 2 | RNVC: 2
RSGU1.8146.10/15: RNCC: 3 | RNVC: 2
DIN3016-D1-10X15-W1-2 MVQ1-70: RNCC: 3 | RNVC: 2
01175535: RNCC: 5 | RNVC: 2
H3223-C10X15-ST/DEUTZMVQ1-70: RNCC: 5 | RNVC: 2
0117 5535: RNCC: 5 | RNVC: 2
4786587: RNCC: 5 | RNVC: 2
9418146010: RNCC: 5 | RNVC: 2

13 Sep 1988

5340-12-319-7676
Resilient Mount

123197676
1-214-001-3641: RNCC: 3 | RNVC: 9
000 320 02 44: RNCC: 5 | RNVC: 2

2 Nov 1989

5340-12-315-0669
Mounting Bracket

123150669
0242 3533: RNCC: 3 | RNVC: 2
4784067: RNCC: 5 | RNVC: 2
02423533EC0148-19: RNCC: 5 | RNVC: 2

13 Sep 1988

5340-12-323-9416
Butt Hinge

123239416
160.14.0001: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-325-3651
Loop Clamp

123253651
DIN3016-D1-6X15-W1-2 HVQ1-70: RNCC: 2 | RNVC: 2
DIN3016-D1-6X15-W1-2 MVQ1-70: RNCC: 2 | RNVC: 2
DIN3016-D1-6X15-W1-2 MVQ1-70: RNCC: 3 | RNVC: 2
RSGU1.8146.6/15: RNCC: 3 | RNVC: 2
01175536ES8932-23: RNCC: 5 | RNVC: 2
K0001175536: RNCC: 5 | RNVC: 2
4786642: RNCC: 5 | RNVC: 2
0117 5536: RNCC: 5 | RNVC: 2
9418/46006: RNCC: 5 | RNVC: 2
K0.00117-5536: RNCC: 5 | RNVC: 2

29 May 1991

5340-12-336-9890
Dust And Moisture Seal Protective Plug

123369890
0414 8450: RNCC: 3 | RNVC: 2
571286277: RNCC: 5 | RNVC: 2
280.14.0253: RNCC: 5 | RNVC: 2
04148450ES8928-73: RNCC: 5 | RNVC: 2
H2873-Q44X1,5-MVQ-3-60: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-336-0963
Resilient Mount

123360963
49505801.NR60.ST: RNCC: 3 | RNVC: 2
05020/101 60 SHORE A: RNCC: 3 | RNVC: 2
05020/101.NR60.ST: RNCC: 5 | RNVC: 2
49505801: RNCC: 5 | RNVC: 2
05020/101: RNCC: 5 | RNVC: 2
05020/101 60 SHORE A: RNCC: 5 | RNVC: 2

24 Oct 1994

5340-12-337-6077
Clamping Catch

123376077
V934L01-1X1BP: RNCC: 3 | RNVC: 2
V934L01-1-1BP: RNCC: 5 | RNVC: 2
22203 28009: RNCC: 5 | RNVC: 9
84073 17106: RNCC: 5 | RNVC: 9

16 Mar 1995

5340-12-351-7591
Helical Compression Spring Seat

123517591
6301.150.128.000: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-356-6961
Mounting Bracket

123566961
027517703: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6976
Lock-Release Lever

123566976
027015702: RNCC: 3 | RNVC: 2
027015701: RNCC: E | RNVC: 8

26 Mar 2002

5340-12-356-6977
Double Angle Bracket

123566977
027014302: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-9400
Lock-Release Lever

123569400
027013401: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-357-0038
Retaining Strap

123570038
027513301: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-357-6359
Access Cover

123576359
541.059.2: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-357-7812
Nonmetallic Bumper

123577812
0029976286: RNCC: 3 | RNVC: 2
EP 1568.534: RNCC: 5 | RNVC: 2
548185: RNCC: 5 | RNVC: 2

23 Jul 2002

5340-12-359-3451
Lock-Release Lever

123593451
867011908: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-150-8958
Turnbuckle Body

121508958
DIN1479-SPM16-1.3965: RNCC: 2 | RNVC: 2
SP-DIN1479-M16-1.3965: RNCC: 3 | RNVC: 2
M16DIN1479-1-3965: RNCC: 5 | RNVC: 2
SPM16DIN1479-1.3965: RNCC: 5 | RNVC: 2
SPM16DIN1479X8CRMNNI188: RNCC: 5 | RNVC: 2
M16DIN1479X8CRMNNI188: RNCC: 5 | RNVC: 2
935979: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-9224
Nonmetallic Bumper

121789224
5370780238: RNCC: 2 | RNVC: 2
5370780238: RNCC: 3 | RNVC: 2
5370780238: RNCC: 5 | RNVC: 2
5370780238: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-191-8830
Spring Tension Clip

121918830
13 304 029: RNCC: 3 | RNVC: 2
08121441: RNCC: 5 | RNVC: 2
8121441EY5020-12: RNCC: 5 | RNVC: 2
WE13304029: RNCC: 5 | RNVC: 2
4244-34: RNCC: 5 | RNVC: 2
0004212991: RNCC: 5 | RNVC: 2
13-304-029: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-189-0592
Detent Plunger

121890592
2500075-321862.03.0: RNCC: 2 | RNVC: 2
2500075-321862.03.0: RNCC: 3 | RNVC: 2
2500075-321862.03.0: RNCC: 5 | RNVC: 9
2500075-321862-03-0: RNCC: 5 | RNVC: 9
2500075-321862-03-0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-310-4702
Retaining Band

123104702
0242 2730: RNCC: 3 | RNVC: 2
4079650: RNCC: 5 | RNVC: 2
570605177: RNCC: 5 | RNVC: 2
K0002422730: RNCC: 5 | RNVC: 2

25 May 1987

5340-12-312-4471
Dust And Moisture Seal Protective Cap

123124471
5077 329 092: RNCC: 3 | RNVC: 2
5077329092: RNCC: 5 | RNVC: 2
544885: RNCC: 5 | RNVC: 2
4430-10: RNCC: 5 | RNVC: 2
0004217187: RNCC: 5 | RNVC: 2
9404430108: RNCC: 5 | RNVC: 2
3.3590-0144.1: RNCC: 5 | RNVC: 9

8 Jan 1988

5340-12-339-1108
Dust And Moisture Seal Protective Cap

123391108
3660180106: RNCC: 3 | RNVC: 2
548115: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-12-335-2126
Handle Grip

123352126
602 0407: RNCC: 3 | RNVC: 2
6020407: RNCC: 5 | RNVC: 2

27 Jul 1994

5340-12-345-9917
Runner

123459917
08828: RNCC: 3 | RNVC: 2
PATRIOT 4: RNCC: 5 | RNVC: 2

27 May 1998

5340-12-346-1469
Dust And Moisture Seal Protective Cap

123461469
2-370-120-010: RNCC: 3 | RNVC: 2
0132 1044: RNCC: 3 | RNVC: 2

18 Jun 1998

5340-12-347-4350
Mounting Bracket

123474350
5221.230.130.210: RNCC: 3 | RNVC: 2
192-2-005344: RNCC: 5 | RNVC: 2

10 Dec 1998

5340-12-347-4872
Angle Bracket

123474872
5221.230.130.080: RNCC: 3 | RNVC: 2
192-2-005442: RNCC: 5 | RNVC: 2

16 Dec 1998

5340-12-351-0952
Access Cover

123510952
251728010012: RNCC: 3 | RNVC: 2
251728010012: RNCC: 5 | RNVC: 2

26 Jun 2000

5340-12-351-7832
Loop Clamp

123517832
DIN3015-S-A-3-R-40-PP-W1: RNCC: 2 | RNVC: 2
SPAL5040PP-DPAL-AS: RNCC: 3 | RNVC: 2
6301.150.410.120: RNCC: 5 | RNVC: 2

23 Aug 2000

5340-12-354-8234
Multiple Angle Bracket

123548234
251816800001: RNCC: 3 | RNVC: 2
251816800001: RNCC: 5 | RNVC: 2

29 Aug 2001

5340-12-356-5116
Mending Plate

123565116
024012602: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-356-5568
Access Cover

123565568
027501009: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-356-6971
Friction Catch Stud Receptacle

123566971
027017203: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-357-0039
Angle Bracket

123570039
027511710: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-359-2283
Spacing Threaded Standoff

123592283
027017409: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-359-2943
Lock-Release Lever

123592943
867007702: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-12-179-7654
Rod End Clevis

121797654
027076602: RNCC: 3 | RNVC: 2
F70919070013: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-304-8251
Dust And Moisture Seal Protective Plug

123048251
0241 9083: RNCC: 3 | RNVC: 2
K0002419083: RNCC: 5 | RNVC: 2
571284777: RNCC: 5 | RNVC: 2
4073980: RNCC: 5 | RNVC: 2
K0.0241-9083: RNCC: 5 | RNVC: 2
02419083EZ0148-20: RNCC: 5 | RNVC: 2

28 Aug 1985

5340-12-305-2860
Sealing Plug Assembly

123052860
6.654-004.0: RNCC: 3 | RNVC: 2
6-654-004: RNCC: 5 | RNVC: 9
6.654-004: RNCC: 5 | RNVC: 9

17 Oct 1985

5340-12-306-8593
Access Cover

123068593
5.000-403.0: RNCC: 3 | RNVC: 2
5-000-403: RNCC: 5 | RNVC: 9
5.000-403: RNCC: 5 | RNVC: 9

10 Apr 1986

5340-12-304-8766
Sealing Plug Assembly

123048766
0241 4527: RNCC: 3 | RNVC: 2
02414527EE0147-01: RNCC: 5 | RNVC: 2

30 Aug 1985

5340-12-314-1000
Loop Clamp

123141000
6739950001: RNCC: 3 | RNVC: 2
673 995 00 01: RNCC: 5 | RNVC: 2

7 Jun 1988

5340-12-323-9412
Electrical-Mechanical Equipment Post

123239412
VG95148C10XM6X80-ST: RNCC: 2 | RNVC: 2
VG95148C10XM6X80-ST: RNCC: 3 | RNVC: 2
040.15.0001: RNCC: 5 | RNVC: 2
N21.80: RNCC: 5 | RNVC: 9

10 Jan 1991

5340-12-322-7572
Nonmetallic Solid Wheel

123227572
SPO 250/40,6G: RNCC: 3 | RNVC: 2
5200.230.020.007: RNCC: 3 | RNVC: 2
407GLK9: RNCC: 5 | RNVC: 2
250X65 SPO 250/40G: RNCC: 5 | RNVC: 9

19 Sep 1990

5340-12-345-9775
Webbing Strap

123459775
020.02.0003: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-345-5051
Spacing Threaded Standoff

123455051
5.15.501: RNCC: 3 | RNVC: 2
040.15.0042: RNCC: 5 | RNVC: 2

25 Mar 1998

5340-12-346-2422
Spring Tension Clip

123462422
251728010007: RNCC: 3 | RNVC: 2
251728010007: RNCC: 5 | RNVC: 2

2 Jul 1998

5340-12-348-3144
Spacing Threaded Standoff

123483144
6300.150.300.076: RNCC: 3 | RNVC: 2

28 May 1999

5340-12-350-9481
Angle Bracket

123509481
6300.150.090.001: RNCC: 3 | RNVC: 2
192-3-004105: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-12-350-9475
Mounting Plate

123509475
6301.150.000.073: RNCC: 3 | RNVC: 2
192-3-004865: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-12-351-8778
Nut And Bolt Locking Plate

123518778
941.027.4: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-12-356-6965
Angle Bracket

123566965
024010303: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6968
Rod End Clevis

123566968
027507401: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-351-7843
Loop Clamp

123517843
SPAL3010PP-DPAL-AS: RNCC: 3 | RNVC: 2
6301.150.430.310: RNCC: 5 | RNVC: 2

23 Aug 2000

5340-12-356-6979
Mounting Bracket

123566979
027514303: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6986
Rod End Clevis

123566986
027511312: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-357-4717
Metallic Bumper

123574717
027010387: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-12-358-0090
Mounting Bracket

123580090
867014305: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-145-4978
Spring Tension Clip

121454978
986551: RNCC: 3 | RNVC: 2
4SXN08: RNCC: 3 | RNVC: 2
4198719: RNCC: 5 | RNVC: 2
100175-0300-24: RNCC: 5 | RNVC: 2
100175-0300.24: RNCC: 5 | RNVC: 2
1008000004: RNCC: 5 | RNVC: 2
1008000004-002: RNCC: 5 | RNVC: 2
4ESN08: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-5668
Uti Resilient Mount

123055668
2-22-000197-01: RNCC: 3 | RNVC: 9
0019880510: RNCC: 5 | RNVC: 2
0019880510: RNCC: 5 | RNVC: 2

22 Nov 1985

5340-12-323-9418
Handle Grip

123239418
200-9119: RNCC: 3 | RNVC: 2
1000-U135: RNCC: 3 | RNVC: 2
0.24.1103.0: RNCC: 3 | RNVC: 2
040.09.0011: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-350-9474
Mending Plate

123509474
6210.112.000.011: RNCC: 3 | RNVC: 2
192-4-002560: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-12-356-5115
Lever Bracket

123565115
024017906: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-356-4946
Mechanical Stop

123564946
027517103: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-12-351-7593
Access Cover

123517593
5.063-281: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-351-7842
Loop Clamp

123517842
5040PP-SIP-AF: RNCC: 3 | RNVC: 2
6301.150.410.121: RNCC: 5 | RNVC: 2

23 Aug 2000

5340-12-356-6981
Angle Bracket

123566981
024014102: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-7032
Spring Tension Clip

123567032
X130-16L: RNCC: 3 | RNVC: 2
909571801: RNCC: 5 | RNVC: 2

26 Mar 2002

5340-12-358-0544
Metallic Solid Wheel

123580544
866416601: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-12-359-3465
Mending Plate

123593465
909470358: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-359-3467
Lock-Release Lever

123593467
869108903: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-165-7855
Dust And Moisture Seal Protective Plug

121657855
0116 1289: RNCC: 3 | RNVC: 2
1161289EF8975-65: RNCC: 5 | RNVC: 2
571284977: RNCC: 5 | RNVC: 2
4062730: RNCC: 5 | RNVC: 2
4797052: RNCC: 5 | RNVC: 2
4H18X2X22H7565: RNCC: 5 | RNVC: 2
1161289: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-177-0712
Retaining Band

121770712
337.994: RNCC: 3 | RNVC: 2
E1022-1600-0101: RNCC: 5 | RNVC: 2
7-253-0246: RNCC: 5 | RNVC: 2
3095-260: RNCC: 5 | RNVC: 2
337-994: RNCC: 5 | RNVC: 2
3095260: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-178-4451
Hand Crank

121784451
00301902: RNCC: 3 | RNVC: 2
00301902-163: RNCC: 5 | RNVC: 9
161503BU: RNCC: 5 | RNVC: 9

20 Apr 1979

5340-12-178-1708
Spring Tension Clip

121781708
11503: RNCC: 3 | RNVC: 2
0009845161: RNCC: 5 | RNVC: 2
11503: RNCC: 5 | RNVC: 2
01-608: RNCC: 5 | RNVC: 2

23 Mar 1979

5340-12-180-6882
Uti Resilient Mount

121806882
724163: RNCC: 3 | RNVC: 2
3118 543/104.2: RNCC: 3 | RNVC: 2
3118 543: RNCC: 5 | RNVC: 2
4062410113: RNCC: 5 | RNVC: 2
4062410213: RNCC: 5 | RNVC: 2
4062410113: RNCC: 5 | RNVC: 2
3118-543-104-2: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-172-7163
Helical Compression Spring Seat

121727163
7632 040 110: RNCC: 3 | RNVC: 2
0004660675: RNCC: 5 | RNVC: 2
02966262: RNCC: 5 | RNVC: 2
0229344: RNCC: 5 | RNVC: 2
0004660675: RNCC: 5 | RNVC: 2
2966262EY5061-13: RNCC: 5 | RNVC: 9
7632040110: RNCC: 5 | RNVC: 9
229344: RNCC: 5 | RNVC: 9

13 Feb 1978

5340-12-189-0590
Detent Plunger

121890590
2500075-321600.12.0: RNCC: 2 | RNVC: 2
2500075-321600.12.0: RNCC: 3 | RNVC: 2
2500075-321600-12-0: RNCC: 5 | RNVC: 9
2500075-321600.12.0: RNCC: 5 | RNVC: 9
2500075-321600-12-0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-305-5977
Plug Button

123055977
323K0012: RNCC: 3 | RNVC: 2
4066880033: RNCC: 5 | RNVC: 2

26 Nov 1985

5340-12-305-9524
Beam Gripping Clamp

123059524
209-101: RNCC: 3 | RNVC: 2
GM-D-112018/35: RNCC: 5 | RNVC: 2
7-605-4210: RNCC: 5 | RNVC: 2

14 Jan 1986

5340-12-185-4872
Clamping Catch

121854872
1097633: RNCC: 3 | RNVC: 2
KN510: RNCC: 5 | RNVC: 2
555.129.1: RNCC: 5 | RNVC: 2
341129614: RNCC: 5 | RNVC: 2

11 Oct 1980

5340-12-325-1386
Expansion Plug

123251386
0730 361 070: RNCC: 3 | RNVC: 2
(241)A396300120758: RNCC: 5 | RNVC: 2
00120758: RNCC: 5 | RNVC: 2
0730 361 070: RNCC: 5 | RNVC: 2
100CP3292: RNCC: 5 | RNVC: 2
0730-361-070: RNCC: 5 | RNVC: 9

7 May 1991

5340-12-345-5730
Spacing Threaded Standoff

123455730
68.31.702: RNCC: 3 | RNVC: 2
040.15.0069: RNCC: 5 | RNVC: 2
69.61.029: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-12-346-0162
Rod End Clevis

123460162
160.33.0002: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-347-8402
Detent Plunger

123478402
5221.230.130.070: RNCC: 3 | RNVC: 2

22 Feb 1999

5340-12-347-4867
Mending Plate

123474867
5200.230.054.000: RNCC: 3 | RNVC: 2
5220.230.054.000: RNCC: 5 | RNVC: 2
192-4-000127: RNCC: 5 | RNVC: 2

16 Dec 1998

5340-12-356-6964
Mounting Bracket

123566964
027504301: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6966
Angle Bracket

123566966
024010302: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-6972
Spring Tension Clip

123566972
027013404: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-356-9398
Spring Holder

123569398
027013001: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-356-9399
Leakproof Seal Plug

123569399
027007314: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-357-7994
Manual Control Lever

123577994
864005003: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-357-7988
Pad Eye

123577988
909666707: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-359-3450
Lever Bracket

123593450
867001903: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-359-6615
Dust And Moisture Seal Protective Plug

123596615
915042017000: RNCC: 3 | RNVC: 2
N15042-17: RNCC: 5 | RNVC: 2

25 Feb 2003

5340-12-354-0503
Nonmetallic Bumper

123540503
217678: RNCC: 3 | RNVC: 2
93158-300.06: RNCC: 5 | RNVC: 2

30 May 2001

5340-12-346-6909
Door Button

123466909
160.31.0256: RNCC: 3 | RNVC: 2

27 Aug 1998

5340-12-347-7090
Nut And Bolt Locking Plate

123477090
480.06.0001: RNCC: 3 | RNVC: 2

1 Feb 1999

NSN 5340-12-343-8921 123438921 SEAT,HELICAL COMPRESSION SPRING

5340-12-343-8921
Helical Compression Spring Seat

123438921
2410120021: RNCC: 3 | RNVC: 2
0131 9290: RNCC: 5 | RNVC: 2

11 Aug 1997

5340-12-323-9970
Mounting Bracket

123239970
160.01.0002: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-402-7541
Uti Resilient Mount

5340-12-346-0166
Spacing Threaded Standoff

123460166
040.15.0047: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-323-9413
Electrical-Mechanical Equipment Post

123239413
VG95148C10XM6X100-ST: RNCC: 2 | RNVC: 2
VG95148C10XM6X100-ST: RNCC: 3 | RNVC: 2
040.15.0019: RNCC: 5 | RNVC: 2
N21.100: RNCC: 5 | RNVC: 9

10 Jan 1991

5340-12-407-4774

5340-12-379-0997
Dust And Moisture Seal Boot

123790997
8977503424: RNCC: 3 | RNVC: 2

23 Jun 2009

NSN 5340-12-159-7715 121597715 PLUG,PROTECTIVE,DUST AND MOISTURE SEAL

5340-12-159-7715
Dust And Moisture Seal Protective Plug

121597715
25036580: RNCC: 3 | RNVC: 2
893579: RNCC: 5 | RNVC: 2
14021-15001-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-9073
Dust And Moisture Seal Protective Cap-Plug

123199073
610U35: RNCC: 3 | RNVC: 2
88037178: RNCC: 5 | RNVC: 2
GPN610U35: RNCC: 5 | RNVC: 2
85-694-1309: RNCC: 6 | RNVC: 9

15 Nov 1989

5340-12-334-0166
Handle Grip

123340166
DIN39-E10-ST-A3P: RNCC: 2 | RNVC: 2
DIN39-E10-ST-VERZINKT: RNCC: 5 | RNVC: 2
DIN39-E10-ST-ZN: RNCC: 5 | RNVC: 2
E10DIN39-ST-VERZINKT: RNCC: 5 | RNVC: 2
DIN39-E10-ST-B2C: RNCC: 5 | RNVC: 9

9 Mar 1994

5340-12-161-3014
Rod End Connector

121613014
M10RECHTSLN9376: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-192-2569
Loop Clamp

121922569
02584224: RNCC: 3 | RNVC: 2
2584224ED5759-46: RNCC: 5 | RNVC: 2

5 Apr 1982

5340-12-323-2058
Access Cover

123232058
2500194-230821.001.0: RNCC: 2 | RNVC: 2
2500194-230821.001.0: RNCC: 3 | RNVC: 2

31 Oct 1990

5340-12-371-9139
Webbing Strap

123719139
614-367: RNCC: 3 | RNVC: 2

29 May 2007

5340-12-702-5500
Mounting Bracket

127025500
VG95211-ML-127025500: RNCC: 2 | RNVC: 2
5.51.7215.0003.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7345
Angle Bracket

127017345
VG95211-ML-127017345: RNCC: 2 | RNVC: 2
5.12.7608.8002.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4765
Mounting Bracket

127014765
VG95211-ML-127014765: RNCC: 2 | RNVC: 2
5.12.5811.0530.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-362-6912
Mounting Plate

123626912
0A807.41-01-01-02-050: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-366-5931
Crank Handle

123665931
2446132: RNCC: 3 | RNVC: 2
2446.132: RNCC: 5 | RNVC: 2

11 May 2005

5340-12-370-9388
Dust And Moisture Seal Protective Cap

123709388
102750: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-12-197-3378
Nonmetallic Bumper

121973378
0003233785: RNCC: 3 | RNVC: 2

13 Oct 1983

5340-12-310-6532
Mending Plate

123106532
0289 4123: RNCC: 3 | RNVC: 2
2894123: RNCC: 5 | RNVC: 2
2894123ED0639-79: RNCC: 5 | RNVC: 2

12 Jun 1987

5340-12-197-1303
Dust And Moisture Seal Protective Plug

121971303
2518071271BG: RNCC: 3 | RNVC: 2
251 807 127: RNCC: 5 | RNVC: 2
251807127: RNCC: 5 | RNVC: 2

21 Sep 1983

5340-12-304-7210
Support Hook

123047210
2300126-181300.007.0: RNCC: 2 | RNVC: 2
2300126-181300.007.0: RNCC: 3 | RNVC: 2
2300126-181300.007.0: RNCC: 5 | RNVC: 2
2300126-181300.007.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-195-6585
Loop Clamp

121956585
DIN3016-G1-102X9-W5: RNCC: 2 | RNVC: 2
DIN3016-G1-102X9-W5: RNCC: 3 | RNVC: 2
SP102/9ZY-W5: RNCC: 3 | RNVC: 2
1210700102: RNCC: 5 | RNVC: 2
SP102-9ZY1-4571: RNCC: 5 | RNVC: 2
SP102/9ZY-1.4571: RNCC: 5 | RNVC: 2
VG95931-G102X9-1.4571: RNCC: 5 | RNVC: 9
VG95931-G102X9-W5: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-312-5973
Metal Runner

123125973
987-111151.00.0: RNCC: 3 | RNVC: 2
987-111151.00.0: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-12-373-5195
Angle Bracket

123735195
23305-208000.01.0: RNCC: 2 | RNVC: 2

12 Nov 2007

5340-12-188-9171
Retaining Strap

121889171
5801433-070200.07.0: RNCC: 3 | RNVC: 2
5801433-070200-07-0: RNCC: 5 | RNVC: 2
5801433-070200-07-0: RNCC: 5 | RNVC: 9
5801433-070200.07.0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-339-6250
Handwheel

123396250
VG85089-A-150X12-RG: RNCC: 2 | RNVC: 2
9-45029-01-05: RNCC: 5 | RNVC: 2
A150X12VG87089-RG5: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-12-198-4107
Double Angle Bracket

121984107
5801563-1111.00: RNCC: 2 | RNVC: 2
5801563-1111.00: RNCC: 3 | RNVC: 2
5801563-1111.00: RNCC: 3 | RNVC: 2
5801563-1111.00: RNCC: 5 | RNVC: 9

25 Jan 1984

5340-12-191-2523
Webbing Strap

121912523
2500058-130100.18: RNCC: 2 | RNVC: 2
2500058-130100.18: RNCC: 3 | RNVC: 2
2500058-130100.18: RNCC: 3 | RNVC: 2
2500058-130100.18: RNCC: 5 | RNVC: 2
2500058-130100-18: RNCC: 5 | RNVC: 9
2500058-130100.18: RNCC: 5 | RNVC: 9
2500058-130100.18: RNCC: 5 | RNVC: 9
000-E4-25X2,5X570-PE-RAL6031: RNCC: 6 | RNVC: 9

20 Jan 1982

5340-12-133-2988
Retaining Strap

121332988
NO PRIMARY REF 12-133-2988: RNCC: 3 | RNVC: 2
1025163-VERBLEIT: RNCC: 5 | RNVC: 9
1025163VERBLEIT: RNCC: 5 | RNVC: 9
16DIN49045-ST-VERBLEIT: RNCC: 5 | RNVC: 9
16DIN49045FLUSZSTAHLVERBLEIT: RNCC: 5 | RNVC: 9
16DIN49045STVERBLEIT: RNCC: 5 | RNVC: 9
DIN49045-16-ST-VERBLEIT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-4287
Spacing Threaded Standoff

123534287
PAN5170-10-090: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-370-1596
Butt Hinge Leaf

123701596
J53233870-404: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-325-0527
Loop Clamp

123250527
DIN3015-L-KP-1-R-12-AL: RNCC: 2 | RNVC: 2
HRL1KP12AL: RNCC: 3 | RNVC: 2
RAAR-112: RNCC: 3 | RNVC: 2
112A-AL: RNCC: 3 | RNVC: 2
62640190: RNCC: 5 | RNVC: 2
RAAR-112: RNCC: 5 | RNVC: 2
DIN3015-LKP1R-12AL: RNCC: 5 | RNVC: 2
2640/190: RNCC: 5 | RNVC: 9
116.701.0120: RNCC: 5 | RNVC: 9

26 Apr 1991

5340-12-193-7706
Loop Clamp

121937706
DIN3016-1-E1-17X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-17X20-W1-2: RNCC: 3 | RNVC: 2
RSGU0.17/20: RNCC: 3 | RNVC: 2
9400020017: RNCC: 5 | RNVC: 2
RSGU17/20: RNCC: 5 | RNVC: 2
DIN3016-E1-17X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-E17X20-W1: RNCC: 5 | RNVC: 9
VG95931E17X20-W1: RNCC: 5 | RNVC: 9

30 Aug 1982

5340-12-384-9190
Dust And Moisture Seal Protective Cover

123849190
F1.1189-30-30-20.30-00: RNCC: 3 | RNVC: 2

11 Apr 2011

5340-12-308-3335
Mending Plate

123083335
2300109-000100.017.0: RNCC: 2 | RNVC: 2
2300109-000100.017.0: RNCC: 3 | RNVC: 2

29 Sep 1986

5340-12-307-6337
Angle Bracket

123076337
P-296895-011: RNCC: 3 | RNVC: 2
P296895-011: RNCC: 5 | RNVC: 2

10 Jul 1986

5340-12-152-1075
Resilient Mount

121521075
DIN95363-C30X20-NR45ST-M5: RNCC: 4 | RNVC: 1
1.30.20.2.45NR/ST: RNCC: 5 | RNVC: 2
811.020.030.020.05.NR45.ST: RNCC: 5 | RNVC: 2
81120-30X20-M5.NR45.ST: RNCC: 5 | RNVC: 2
7F81498.2-001: RNCC: 5 | RNVC: 2
7F81498-2-001: RNCC: 5 | RNVC: 9
VG95363-C30X20-M5-NR45ST: RNCC: 5 | RNVC: 9
VG95363-C30X20-NR45ST-M5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-154-1720
Handwheel

121541720
11155: RNCC: 3 | RNVC: 2
11196-5-11155: RNCC: 5 | RNVC: 2
0005640183: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-306-2871
Gummi- Riemen

123062871
2300163-192512.000.0: RNCC: 2 | RNVC: 2
82300-2300163-192512.000.0: RNCC: 3 | RNVC: 2
2300163-192512.000.0: RNCC: 3 | RNVC: 2
1283412: RNCC: 5 | RNVC: 2
82300-C275X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

14 Feb 1986

5340-12-344-3285
Angle Bracket

123443285
81974870144: RNCC: 3 | RNVC: 2
81.97487-0144: RNCC: 5 | RNVC: 2

16 Oct 1997

5340-12-349-7500
Butt Hinge Leaf

123497500
FAST-202400.03: RNCC: 2 | RNVC: 2
FAST-202400.03: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-367-0432
Mounting Bracket

123670432
PIKWVF30/30: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-314-1089
Mounting Bracket

123141089
67435-50110: RNCC: 2 | RNVC: 2
AMG67435-50110: RNCC: 5 | RNVC: 9

8 Jun 1988

5340-12-375-7573
Mechanical Stop

123757573
D0104262-001: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-12-199-2315
Lock-Release Lever

121992315
20-8210-054: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-12-310-2836
Angle Bracket

123102836
C22156-A1000-C805: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-136-8251
Expansion Plug

121368251
DIN470-48-ST-PHR: RNCC: 2 | RNVC: 2
48DIN470PHR: RNCC: 5 | RNVC: 2
48DIN470PHRE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-8454
Angle Bracket

123568454
ED88-0100-01001-135: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-310-4210
Clamping Catch

123104210
8101-5000: RNCC: 2 | RNVC: 2
8101-5000: RNCC: 5 | RNVC: 9

20 May 1987

5340-12-164-3091
Double Angle Bracket

121643091
23290-033050: RNCC: 2 | RNVC: 2
23290-033050: RNCC: 3 | RNVC: 2
23290-033050: RNCC: 5 | RNVC: 9
23290-033050: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-4497
Handwheel

121654497
12729-12000-006: RNCC: 3 | RNVC: 2

6 May 1976

5340-12-181-4608
Schluessel

121814608
RH13158-183: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-12-198-7954
Rod End Clevis

121987954
DIN71752-G16X32-9SMN28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G16X32-9SMNPB28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G16X32-A3P: RNCC: 2 | RNVC: 2
DIN71752-G16X32-A3P: RNCC: 3 | RNVC: 2
DIN71752-G16X32-A3P: RNCC: 3 | RNVC: 2
100200160032/024: RNCC: 3 | RNVC: 2
6-371-0151: RNCC: 5 | RNVC: 2
G16X32DIN71752: RNCC: 5 | RNVC: 2
DIN71752-G16X32: RNCC: 5 | RNVC: 9
G 16X32/71752: RNCC: 5 | RNVC: 9

27 Feb 1984

5340-12-407-1573
Dust Protective Cap

5340-12-321-6441
Loop Clamp

123216441
DIN3016-1-D1-8X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-8X15-W5: RNCC: 3 | RNVC: 2
RSGU1.8/15-W5: RNCC: 3 | RNVC: 2
103159: RNCC: 5 | RNVC: 2
DIN3016-D1-8X15-W5: RNCC: 5 | RNVC: 9
VG95931-D8X15-W5: RNCC: 5 | RNVC: 9
1165252: RNCC: 6 | RNVC: 9

12 Jun 1990

5340-12-364-2073
Spring Tension Clip

123642073
9069940045: RNCC: 3 | RNVC: 2
548135: RNCC: 5 | RNVC: 2

1 Sep 2004

5340-12-407-8244

5340-12-342-3793
Dust And Moisture Seal Protective Cap

123423793
DC60-20: RNCC: 3 | RNVC: 2
SP03496: RNCC: 5 | RNVC: 2
00.4.623.6220: RNCC: 5 | RNVC: 9

30 Jan 1997

5340-12-338-5010
Dust And Moisture Seal Protective Plug

123385010
GPN910/3759-PHT-SCHWARZ: RNCC: 3 | RNVC: 2
GPN910/3759 PHT SW: RNCC: 5 | RNVC: 2
910/3759-PHT-SW: RNCC: 5 | RNVC: 2
50395500: RNCC: 5 | RNVC: 2
50395500.984: RNCC: 5 | RNVC: 2

19 Jul 1995

5340-12-345-5301
Loop Clamp

123455301
RSGU1.12/15-W5: RNCC: 3 | RNVC: 2
RSGU1-12/15W5: RNCC: 5 | RNVC: 2

27 Mar 1998

5340-12-348-7517
Mending Plate

123487517
DIN15058-25X6: RNCC: 2 | RNVC: 2
5200.111.000.011: RNCC: 3 | RNVC: 2

12 Aug 1999

5340-12-349-1754
Dust And Moisture Seal Protective Cap

123491754
060.22.0029: RNCC: 3 | RNVC: 2
060.22.0029: RNCC: 5 | RNVC: 2

5 Oct 1999

5340-12-381-6167
Clamping Catch

123816167
400401035H: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-12-386-0894
Dust And Moisture Seal Protective Plug

123860894
B9MTN5073: RNCC: 3 | RNVC: 2
735073009100: RNCC: 5 | RNVC: 2

8 Aug 2011

5340-12-154-6766
Loop Clamp

121546766
DIN3016-1-D1-15X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-15X15-W5: RNCC: 3 | RNVC: 2
RSGU1.15/15-W5: RNCC: 3 | RNVC: 2
9410715015: RNCC: 5 | RNVC: 2
RSGU1100-15-15-1-4571: RNCC: 5 | RNVC: 2
RSGU1100.15/15-1.4571: RNCC: 5 | RNVC: 2
RSGU1.15/15-W5: RNCC: 5 | RNVC: 2
VG95931D15X15W5: RNCC: 5 | RNVC: 9
DIN3016-D1-15X15-W5: RNCC: 5 | RNVC: 9
VG95931-D15X15-W5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-7236
Mounting Plate

123567236
2783986: RNCC: 3 | RNVC: 2
2783986: RNCC: 5 | RNVC: 2

27 Mar 2002

5340-12-358-2893
Helical Compression Spring Seat

123582893
5410530225: RNCC: 3 | RNVC: 2
15010405: RNCC: 5 | RNVC: 2

8 Oct 2002

5340-12-387-5863
Shimmy Damper

123875863
X51608200003: RNCC: 3 | RNVC: 2
X51608200002: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-12-409-2637

5340-12-358-0088
Mounting Plate

123580088
867014003: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-370-8562
Mounting Plate

123708562
HRZ1DP-A2: RNCC: 3 | RNVC: 2
HRZ-1-DP-A2: RNCC: 5 | RNVC: 2
909624026: RNCC: 5 | RNVC: 2

10 Jan 2007

5340-12-173-6320
Dust And Moisture Seal Protective Cap

121736320
250/89: RNCC: 3 | RNVC: 2
SP03476: RNCC: 5 | RNVC: 2
GPN250/89: RNCC: 5 | RNVC: 2
250-89: RNCC: 5 | RNVC: 9
250-89GPN250: RNCC: 5 | RNVC: 9
250089000: RNCC: 5 | RNVC: 9
GPN250-89: RNCC: 5 | RNVC: 9
00.4.623.0671: RNCC: 5 | RNVC: 9

26 Apr 1978

5340-12-316-4190
Loop Clamp

123164190
DIN3015-L-KP-2-R-15-PP: RNCC: 2 | RNVC: 2
HRL2KP15PP: RNCC: 3 | RNVC: 2
RAPR-215: RNCC: 3 | RNVC: 2
DIN3015-LKP2R-15PP: RNCC: 5 | RNVC: 2
RAPE-215: RNCC: 5 | RNVC: 2
RBP-215: RNCC: 5 | RNVC: 2

17 Jan 1989

5340-12-370-8554
Mounting Plate

123708554
865340355: RNCC: 3 | RNVC: 2

10 Jan 2007

5340-12-374-8047
Mounting Plate

123748047
4.006-015.0: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-12-356-9397
Leakproof Seal Plug

123569397
027007313: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-390-0464
Utility Resilient Mount

123900464
B716002001: RNCC: 3 | RNVC: 2
81.96210-0508: RNCC: 5 | RNVC: 2
81962100508: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-370-8789
Utility Resilient Mount

123708789
81962106057: RNCC: 3 | RNVC: 2
81.96210-6057: RNCC: 5 | RNVC: 2
140961436: RNCC: 5 | RNVC: 2

11 Jan 2007

5340-12-393-4415
Utility Resilient Mount

123934415
06.51711-0216: RNCC: 3 | RNVC: 2
06.51711-0216: RNCC: 5 | RNVC: 2

17 Sep 2013

5340-12-367-3451
Utility Resilient Mount

123673451
5161-331000A16B: RNCC: 2 | RNVC: 2
5161-331000A16B: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-12-374-2539
Utility Resilient Mount

123742539
L183M0006101: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-392-5764
Utility Resilient Mount

123925764
21489-65: RNCC: 3 | RNVC: 2
EF/302/153: RNCC: 5 | RNVC: 2

19 Jun 2013

5340-12-379-3286
Utility Resilient Mount

123793286
741432-60 SHORE A: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-12-388-6034
Utility Resilient Mount

123886034
W14703: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-379-7362
Utility Resilient Mount

123797362
0224 9777: RNCC: 3 | RNVC: 2
CV162596: RNCC: 5 | RNVC: 2
CV169464: RNCC: 5 | RNVC: 2
0224 9777: RNCC: 5 | RNVC: 2
05711091: RNCC: 5 | RNVC: 2

27 Aug 2009

5340-12-385-5251
Utility Resilient Mount

123855251
781075: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-12-380-8302
Utility Resilient Mount

123808302
1557944: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-371-4030
Utility Resilient Mount

123714030
1074658: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-12-383-1427
Utility Resilient Mount

123831427
3307-0010: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-12-372-3652
Utility Resilient Mount

123723652
91-5281-01-12-00: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-12-382-5634
Utility Resilient Mount

123825634
NYX-DT-0906-14: RNCC: 3 | RNVC: 2

8 Jul 2010

5340-12-373-7400
Utility Resilient Mount

123737400
135-2721-01-30-00: RNCC: 3 | RNVC: 2
135/2721-01-30-00: RNCC: 5 | RNVC: 2

4 Dec 2007

5340-12-377-8622
Utility Resilient Mount

123778622
1210000044: RNCC: 3 | RNVC: 2
271007418: RNCC: 5 | RNVC: 2
SES4000-65SHORENR-ST37-2: RNCC: 5 | RNVC: 2
R901219169: RNCC: 5 | RNVC: 2

17 Feb 2009

5340-12-383-3261
Utility Access Door

123833261
15276-08-1-08: RNCC: 3 | RNVC: 2
K31900036: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-12-352-2403
Utility Access Door

123522403
485.01.0002: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-12-377-8631
Utility Resilient Mount

123778631
1210000043: RNCC: 3 | RNVC: 2
271007417: RNCC: 5 | RNVC: 2
SES4000-55SHORENR-ST37-2: RNCC: 5 | RNVC: 2

17 Feb 2009

5340-12-352-2405
Utility Access Door

123522405
485.01.0004: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-12-183-9872
Mounting Bracket

121839872
183805735: RNCC: 3 | RNVC: 2

9 Jun 1980

5340-12-391-3721
Utility Resilient Mount

123913721
68543000: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-12-370-5413
Utility Resilient Mount

123705413
81962100520: RNCC: 3 | RNVC: 2
B 33 7502 010: RNCC: 3 | RNVC: 9
81.96210.0520: RNCC: 5 | RNVC: 2

20 Nov 2006

5340-12-382-5836
Utility Resilient Mount

123825836
22 24 023: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-12-385-6089
Utility Resilient Mount

123856089
15100101: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-12-363-4549
Utility Resilient Mount

123634549
103/1576 0: RNCC: 3 | RNVC: 2
A 941 241 52 13KZ: RNCC: 5 | RNVC: 1
9412415213: RNCC: 5 | RNVC: 2

17 Jun 2004

5340-12-382-6704
Utility Access Door

123826704
39037: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-12-373-4911
Utility Resilient Mount

123734911
31658/D: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-12-370-7177
Utility Resilient Mount

123707177
026 903 243 A: RNCC: 3 | RNVC: 2

13 Dec 2006

5340-12-384-8109
Utility Resilient Mount

123848109
01081020: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-12-193-6502
Utility Resilient Mount

121936502
PAN5176T01: RNCC: 3 | RNVC: 2

17 Aug 1982

5340-12-375-9531
Utility Resilient Mount

123759531
103645: RNCC: 3 | RNVC: 2

24 Jul 2008

5340-12-383-2915
Utility Access Door

123832915
K31900038: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-12-394-1126
Utility Resilient Mount

123941126
3913406: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-383-2899
Utility Access Door

123832899
K31900039: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-12-362-5697
Utility Access Door

123625697
1374610: RNCC: 3 | RNVC: 2
3KK834: RNCC: 5 | RNVC: 2

6 Mar 2004

5340-12-384-1250
Utility Resilient Mount

123841250
18.17.12: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-12-367-6129
Utility Resilient Mount

123676129
0134 0134: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-12-362-9795
Utility Resilient Mount

123629795
530652-NR75SH: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-365-7884
Utility Access Door

123657884
701809905: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-12-371-8483
Utility Resilient Mount

123718483
035920: RNCC: 3 | RNVC: 2
035920E: RNCC: 5 | RNVC: 2

22 May 2007

5340-12-365-6033
Utility Resilient Mount

123656033
00196002 2: RNCC: 3 | RNVC: 2
LET00120-9: RNCC: 5 | RNVC: 2
LET00121-9: RNCC: 5 | RNVC: 2

18 Jan 2005

5340-12-394-4603
Utility Resilient Mount

123944603
2-80147130: RNCC: 3 | RNVC: 2

4 Dec 2013

5340-12-371-0755
Utility Resilient Mount

123710755
81.96210.0127: RNCC: 3 | RNVC: 2
81962100127: RNCC: 3 | RNVC: 2
81.96210-0127: RNCC: 5 | RNVC: 2

6 Feb 2007

5340-12-371-5626
Utility Access Door

123715626
SK686-182022.000.0: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-12-377-8405
Utility Resilient Mount

123778405
89000501: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-12-367-7594
Utility Resilient Mount

123677594
HB22-BBM-4: RNCC: 3 | RNVC: 2
0002372011: RNCC: 5 | RNVC: 2

10 Oct 2005

5340-12-379-7416
Utility Resilient Mount

123797416
0428 6860: RNCC: 3 | RNVC: 2
0428 6860: RNCC: 5 | RNVC: 2
CV162689: RNCC: 5 | RNVC: 2
CV169531: RNCC: 5 | RNVC: 2
05718398: RNCC: 5 | RNVC: 2

27 Aug 2009

5340-12-366-9483
Utility Access Door

123669483
TC-1664-02.030.500B: RNCC: 2 | RNVC: 2
TC-1664-02.030.500B: RNCC: 3 | RNVC: 2

23 Jun 2005

5340-12-383-5112
Utility Resilient Mount

123835112
7306-0418: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-12-366-1030
Utility Resilient Mount

123661030
5802300780: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-12-305-1066
Access Cover

123051066
0414 0865: RNCC: 3 | RNVC: 2
04140865ED0148-01: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-193-3700
Access Cover

121933700
VG95211-ML-121933700: RNCC: 2 | RNVC: 2
01TC34230: RNCC: 3 | RNVC: 2

14 Jul 1982

5340-12-378-4869
Utility Resilient Mount

123784869
781078-45 SHORE A: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-12-371-9629
Utility Resilient Mount

123719629
1505041: RNCC: 3 | RNVC: 2
548-010100.01.0: RNCC: 5 | RNVC: 2
15004222: RNCC: 5 | RNVC: 2

4 Jun 2007

5340-12-349-7687
Utility Resilient Mount

123497687
81960200382: RNCC: 3 | RNVC: 2
210163BIRN5090: RNCC: 3 | RNVC: 2
81.96020.0382: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-387-4324
Utility Access Door

123874324
1030228-977030.000.0: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-12-377-4735
Utility Resilient Mount

123774735
G2 30-06 DG: RNCC: 3 | RNVC: 2
X00033092: RNCC: 5 | RNVC: 2

19 Jan 2009

5340-12-387-6998
Utility Resilient Mount

123876998
LAM41202704: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-345-4790
Utility Resilient Mount

123454790
DIN95363-B100X55-NR50ST: RNCC: 2 | RNVC: 2
R13: RNCC: 5 | RNVC: 2
S05-04-0013: RNCC: 5 | RNVC: 2
90134A4E-13/REP.4: RNCC: 5 | RNVC: 9

23 Mar 1998

5340-12-384-6918
Utility Resilient Mount

123846918
14103947: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-195-4304
Utility Resilient Mount

121954304
PAN5174T02: RNCC: 3 | RNVC: 2

24 Feb 1983

5340-12-375-3772
Utility Resilient Mount

123753772
2197 2231-322: RNCC: 3 | RNVC: 2
2197 2231-322: RNCC: 5 | RNVC: 2

27 May 2008

5340-12-384-6687
Utility Resilient Mount

123846687
14103267: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-12-378-9190
Utility Resilient Mount

123789190
0022376312: RNCC: 3 | RNVC: 2

28 May 2009

5340-12-386-0331
Utility Resilient Mount

123860331
4602407118: RNCC: 3 | RNVC: 2
4602407118: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-12-384-6937
Utility Resilient Mount

123846937
917387: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-393-4012
Utility Resilient Mount

123934012
63376: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-378-4006
Utility Resilient Mount

123784006
5052370011: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-370-7326
Utility Resilient Mount

123707326
23253365: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-12-390-5969
Utility Resilient Mount

123905969
54002701: RNCC: 3 | RNVC: 2
540027: RNCC: 5 | RNVC: 2
7188348: RNCC: 5 | RNVC: 2
7091694: RNCC: 5 | RNVC: 2

27 Nov 2012

5340-12-371-4711
Utility Resilient Mount

123714711
1505038: RNCC: 3 | RNVC: 2
548-010200.01.0: RNCC: 5 | RNVC: 2
15004223: RNCC: 5 | RNVC: 2

3 Apr 2007

5340-12-371-5763
Utility Access Door

123715763
2300525-182032.000.0: RNCC: 3 | RNVC: 2
1776506: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-380-6230
Utility Resilient Mount

123806230
X00041048: RNCC: 3 | RNVC: 2

13 Nov 2009

5340-12-380-8508
Utility Resilient Mount

123808508
151003M8CRST70: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-12-373-7397
Utility Resilient Mount

123737397
135-4932-01-10-00: RNCC: 3 | RNVC: 2
135/4932-01-10-00: RNCC: 5 | RNVC: 2

4 Dec 2007

5340-12-383-6068
Utility Resilient Mount

123836068
82414016019: RNCC: 3 | RNVC: 2
82.41401-6019: RNCC: 5 | RNVC: 2

12 Nov 2010

5340-12-367-9530
Utility Resilient Mount

123679530
3956101000: RNCC: 3 | RNVC: 2
27860-60SHORE: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-361-6759
Utility Access Door

123616759
8262-0027: RNCC: 2 | RNVC: 2
8262-0027: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-384-8777
Utility Resilient Mount

123848777
2BX4 132: RNCC: 3 | RNVC: 2
2BH10: RNCC: 5 | RNVC: 2
0594008901000: RNCC: 5 | RNVC: 2

6 Apr 2011

5340-12-361-4382
Utility Resilient Mount

123614382
61000201: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-362-9638
Utility Resilient Mount

123629638
539920-75SH: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-12-384-6146
Utility Resilient Mount

123846146
X00044697: RNCC: 3 | RNVC: 2
X00044697: RNCC: 5 | RNVC: 2

14 Mar 2011

5340-12-380-9163
Utility Resilient Mount

123809163
00218960: RNCC: 3 | RNVC: 2
332/U0081: RNCC: 5 | RNVC: 2

11 Dec 2009

5340-12-384-1419
Utility Resilient Mount

123841419
DIN95363-A30X20-NBR55ST: RNCC: 2 | RNVC: 2

26 Jan 2011

5340-12-359-9341
Utility Access Door

123599341
2500261-183751.000.0: RNCC: 2 | RNVC: 2
2500261-183751.000.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-361-4171
Utility Resilient Mount

123614171
1503828: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-371-4712
Utility Resilient Mount

123714712
1505039: RNCC: 3 | RNVC: 2
548-010200.02.0: RNCC: 5 | RNVC: 2
15004224: RNCC: 5 | RNVC: 2

3 Apr 2007

5340-12-378-3848
Utility Resilient Mount

123783848
RG22001-11: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-372-4334
Utility Resilient Mount

123724334
BF45-110E25: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-12-379-1636
Utility Access Door

123791636
A425401453-512: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-363-5319
Utility Resilient Mount

123635319
838589095920: RNCC: 3 | RNVC: 2

25 Jun 2004

5340-12-380-9752
Utility Resilient Mount

123809752
81846: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-12-394-4424
Utility Resilient Mount

123944424
3911107000: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-361-1969
Utility Resilient Mount

123611969
J94330265-401: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-385-0749
Utility Resilient Mount

123850749
921667: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-12-346-0200
Utility Resilient Mount

123460200
ST.1Y: RNCC: 3 | RNVC: 2
ST1Y: RNCC: 5 | RNVC: 2
90134A1E-32/REP.4: RNCC: 5 | RNVC: 9
90134A1E-30/REP.4: RNCC: 5 | RNVC: 9

29 May 1998

5340-12-371-4438
Utility Resilient Mount

123714438
H125-216-90-107-8: RNCC: 3 | RNVC: 2
006402494: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-12-379-6668
Utility Resilient Mount

123796668
0650001: RNCC: 3 | RNVC: 2

20 Aug 2009

5340-12-390-7990
Utility Resilient Mount

123907990
K4 6-02 S2: RNCC: 3 | RNVC: 2
PS236-102030-01: RNCC: 5 | RNVC: 2

12 Dec 2012

5340-12-373-3852
Utility Access Door

123733852
8262-0046: RNCC: 3 | RNVC: 2
8262-0046: RNCC: 5 | RNVC: 2

26 Oct 2007

5340-12-383-3991
Utility Resilient Mount

123833991
2HC-1.2Y FIG1 REP 59: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-12-367-6808
Utility Resilient Mount

123676808
0744052: RNCC: 3 | RNVC: 2

23 Sep 2005

5340-12-371-5776
Utility Access Door

123715776
2300525-182013.000.0: RNCC: 3 | RNVC: 2
1776505: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-383-8086
Utility Resilient Mount

123838086
601241-201400.03: RNCC: 2 | RNVC: 2
601241-201400.03: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-12-378-3602
Utility Resilient Mount

123783602
0012377312: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-378-2962
Utility Resilient Mount

123782962
500351393: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-361-1982
Utility Resilient Mount

123611982
E1H 41-11EB: RNCC: 3 | RNVC: 2
A1Z10292165: RNCC: 5 | RNVC: 2

3 Sep 2003

5340-12-374-1305
Utility Access Door

123741305
8262-0040: RNCC: 2 | RNVC: 2
8262-0040: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-12-391-3096
Utility Resilient Mount

123913096
48686: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-12-371-2759
Utility Access Door

123712759
8262-0032: RNCC: 2 | RNVC: 2
8262-0032: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-391-4522
Utility Resilient Mount

123914522
1635010181: RNCC: 3 | RNVC: 2
1635010181: RNCC: 5 | RNVC: 2

13 Mar 2013

5340-12-388-2892
Utility Resilient Mount

123882892
509172: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-12-377-2704
Utility Resilient Mount

123772704
315303: RNCC: 3 | RNVC: 2

22 Dec 2008

5340-12-364-2576
Utility Resilient Mount

123642576
H160-267-100-125-8F: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-390-0607
Utility Guard Rail Section

123900607
4.006-431.0: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-367-6452
Utility Resilient Mount

123676452
6452400118: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-12-391-4808
Utility Resilient Mount

123914808
PTG-Z-900-DAB03: RNCC: 3 | RNVC: 2
0009840002: RNCC: 5 | RNVC: 2
0009840002: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-12-386-9380
Utility Resilient Mount

123869380
10404001-40: RNCC: 3 | RNVC: 2
104040 01-40: RNCC: 5 | RNVC: 2
60011031-45SH: RNCC: 5 | RNVC: 9

19 Oct 2011

5340-12-378-5248
Utility Resilient Mount

123785248
31660/C: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-12-376-0546
Utility Resilient Mount

123760546
3915238: RNCC: 3 | RNVC: 1
58498: RNCC: 5 | RNVC: 1

7 Aug 2008

5340-12-392-4118
Utility Resilient Mount

123924118
I006073: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-367-7111
Utility Resilient Mount

123677111
701711259B: RNCC: 3 | RNVC: 2

28 Sep 2005

5340-12-353-5638
Utility Resilient Mount

123535638
521303-25443-65SHORE: RNCC: 3 | RNVC: 2

10 Apr 2001

5340-12-384-2082
Utility Resilient Mount

123842082
G540607000: RNCC: 3 | RNVC: 2
RDR64051: RNCC: 5 | RNVC: 2
G540607000: RNCC: 5 | RNVC: 9

2 Feb 2011

5340-12-377-4952
Utility Resilient Mount

123774952
90831: RNCC: 3 | RNVC: 2
077 18 007/102: RNCC: 5 | RNVC: 2

20 Jan 2009

5340-12-379-9890
Utility Resilient Mount

123799890
0000351700: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-125-1475
Retaining Strap

121251475
0216147: RNCC: 3 | RNVC: 2
1920-096: RNCC: 5 | RNVC: 2
1920096: RNCC: 5 | RNVC: 2
157-2535: RNCC: 5 | RNVC: 9
157-2535: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-4002
Utility Resilient Mount

123544002
DIN95363-A30X15-M8X15-NR55ST: RNCC: 2 | RNVC: 2

9 Jul 2001

5340-12-394-1144
Utility Resilient Mount

123941144
HHSS14-70TM2: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-365-8429
Utility Resilient Mount

123658429
H95-216-110-188-8FF: RNCC: 3 | RNVC: 2

11 Feb 2005

5340-12-372-2272
Utility Resilient Mount

123722272
2102400318: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-12-384-6923
Utility Resilient Mount

123846923
917381: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-388-8905
Utility Resilient Mount

123888905
1214 7802: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-193-6501
Utility Resilient Mount

121936501
PAN5173T01: RNCC: 3 | RNVC: 2

17 Aug 1982

5340-12-385-5952
Utility Resilient Mount

123855952
XP58323300012: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-12-375-1055
Utility Resilient Mount

123751055
DIN95363-B15X15-M4X13-NR55ST: RNCC: 2 | RNVC: 2
VG95363-B15X15-M4X13-NR55ST: RNCC: 5 | RNVC: 9

22 Apr 2008

5340-12-383-3272
Utility Access Door

123833272
15276-08-1-28: RNCC: 3 | RNVC: 2
K31900041: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-12-362-3876
Utility Resilient Mount

123623876
726910408: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-12-385-5945
Utility Resilient Mount

123855945
XP58323300011: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-12-377-4443
Utility Resilient Mount

123774443
08162280: RNCC: 3 | RNVC: 2

16 Jan 2009

5340-12-381-1498
Utility Resilient Mount

123811498
6.339-223.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-387-0719
Utility Access Door

123870719
492-190121.000: RNCC: 2 | RNVC: 2
492-190121.000: RNCC: 3 | RNVC: 2

3 Nov 2011

5340-12-382-3694
Utility Resilient Mount

123823694
SBF 35.050-02042: RNCC: 3 | RNVC: 2

11 Jun 2010

5340-12-196-8837
Utility Resilient Mount

121968837
DIN95368-A2-1-NR45-ST: RNCC: 2 | RNVC: 2
786021S1.NR45.ST: RNCC: 5 | RNVC: 2
81600-786021S1.NR45.ST: RNCC: 5 | RNVC: 2
KONUS-LAGER-786021S1.NR45.ST: RNCC: 5 | RNVC: 2
57860210140: RNCC: 5 | RNVC: 2
786021S1-45: RNCC: 5 | RNVC: 2
786021S1WEICH: RNCC: 5 | RNVC: 2
VG95368-A2-1-NR45ST: RNCC: 5 | RNVC: 9

29 Aug 1983

5340-12-384-8261
Utility Resilient Mount

123848261
H1.1289-27-14-00.00-03: RNCC: 3 | RNVC: 2

1 Apr 2011

Load More Results