What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 79 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 79 of 178

5340-12-381-0843
Nut And Bolt Head Protective Cap

123810843
4379940047: RNCC: 3 | RNVC: 2

8 Jan 2010

5340-12-300-2816
Dust And Moisture Seal Protective Plug

123002816
3149180213: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-389-1023
Expansion Shield

123891023
050125: RNCC: 3 | RNVC: 2

29 May 2012

5340-12-385-5490
Mending Plate

123855490
5562300240: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-191-7663
Door Button

121917663
6020330: RNCC: 3 | RNVC: 2

2 Mar 1982

5340-12-323-8392
Electrical-Mechanical Equipment Post

123238392
442147: RNCC: 2 | RNVC: 2
442147: RNCC: 3 | RNVC: 2
442147: RNCC: 5 | RNVC: 2
442147: RNCC: 5 | RNVC: 9

21 Dec 1990

5340-12-170-8035
Bail Handle

121708035
273-0: RNCC: 3 | RNVC: 2

11 Aug 1977

5340-12-391-1745
Recess Handle

123911745
0.078.131.9: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-12-159-1754
Webbing Strap

121591754
151-M/850MM: RNCC: 3 | RNVC: 2
SCHL0SZGURT151M: RNCC: 5 | RNVC: 9
SCHLOSZGURT 151M: RNCC: 5 | RNVC: 9
151 M: RNCC: 5 | RNVC: 9
151-M/850MM: RNCC: 5 | RNVC: 9
100412-1500: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-4196
Multiple Angle Bracket

123684196
881.902-2: RNCC: 2 | RNVC: 2
881.902-2: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-12-362-4051
Bail Handle

123624051
E51483: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-12-365-5044
Spring Tension Clip

123655044
357501639: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-12-305-6172
Door Handle

123056172
580B127: RNCC: 3 | RNVC: 2
CF 429 384 -R: RNCC: 5 | RNVC: 2
CF 429 384 -R: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-12-311-9012
Access Cover

123119012
4/0421/7414/4: RNCC: 2 | RNVC: 2
4/0421/7414/4: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-12-358-1357
Spacing Threaded Standoff

123581357
52F5600: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-139-9952
Retaining Strap

121399952
BSN9X20X2: RNCC: 3 | RNVC: 2
15200000009: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-353-9994
Access Cover

123539994
880 181 10 20: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-315-3546
Sealing Plug Assembly

123153546
1463203347: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-340-6464
Webbing Strap

123406464
705403803: RNCC: 3 | RNVC: 2
70 540 3803: RNCC: 5 | RNVC: 2
70 540 3803: RNCC: 5 | RNVC: 2

16 May 1996

5340-12-197-4076
Angle Bracket

121974076
5801807-6000: RNCC: 2 | RNVC: 2
5801807-6000: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-189-0386
Retaining Strap

121890386
9297276: RNCC: 3 | RNVC: 2
25024100001001: RNCC: 5 | RNVC: 2
F300 0T 001 2830: RNCC: 6 | RNVC: 9

19 Aug 1981

5340-12-043-2728

5340-12-330-3372
Double Angle Bracket

123303372
4900209-601230.01: RNCC: 2 | RNVC: 2
0106.62301.000: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-12-384-3542
Access Cover

123843542
8003957: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-12-321-6524
Mounting Bracket

123216524
293950: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-346-6103
Angle Bracket

123466103
2930.1002: RNCC: 3 | RNVC: 2

17 Aug 1998

5340-12-300-2251
Electrical-Mechanical Equipment Post

123002251
7059401: RNCC: 3 | RNVC: 2

23 Jan 1991

5340-12-376-8853
Nonmetallic Solid Wheel

123768853
8098669: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-12-352-6596
Metal Grille

123526596
5400049-724100.06: RNCC: 2 | RNVC: 2
5400049-724100.06: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-12-122-2347

5340-12-011-5125

5340-12-042-0902

5340-12-348-6147
Mounting Bracket

123486147
NN31145G01: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-12-349-2816
Flush Lock

123492816
T521M0301102: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-376-8945
Retaining Clip

123768945
526874: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-12-319-6789
Angle Bracket

123196789
136M19727: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-12-322-3443
Handle Grip

123223443
43711221-601: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-354-8626
Flush Lock

123548626
284073234: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-394-0910
Dust And Moisture Seal Protective Cap

123940910
CTP40290P004: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-382-4724
Access Door Hinge

123824724
1020 06341: RNCC: 3 | RNVC: 2

28 Jun 2010

5340-12-322-3936
Nonmetallic Bumper

123223936
54.3050.000.06: RNCC: 2 | RNVC: 2
54.3050.000.06: RNCC: 3 | RNVC: 2

17 Aug 1990

5340-12-323-8471
Lock-Release Lever

123238471
K6534: RNCC: 3 | RNVC: 2

27 Dec 1990

5340-12-091-3401

5340-12-169-7536
Spring Tension Clip

121697536
A11A244001379: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-327-7922
Mending Plate

123277922
DK AV 007: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-12-337-8967
Access Door

123378967
100050661: RNCC: 3 | RNVC: 2
10 0050 661: RNCC: 5 | RNVC: 2

2 May 1995

5340-12-364-1598
Spring Tension Clip

123641598
5830000400: RNCC: 3 | RNVC: 2
0009945448: RNCC: 5 | RNVC: 2

26 Aug 2004

5340-12-321-8259
Nonmetallic Bumper

123218259
9000 8235: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-12-323-5074
Pad Eye

123235074
1161711: RNCC: 3 | RNVC: 2
4003.065.68.00.009: RNCC: 5 | RNVC: 2
4003.65.68/9: RNCC: 5 | RNVC: 2
1161711: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-385-9620
Access Hole Frame

123859620
2500262-394212.000.0: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-12-393-3775
Mounting Bracket

123933775
4100094-981115.000.0: RNCC: 2 | RNVC: 2
4100094-981115.000.0: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-12-326-4151
Nonmetallic Bumper

123264151
5.035.231.0: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-12-302-4103
Nonmetallic Bumper

123024103
1015.4.012006.4: RNCC: 3 | RNVC: 2
0791547: RNCC: 5 | RNVC: 2
1015.4012006.4: RNCC: 5 | RNVC: 2

28 Dec 1984

5340-12-394-1121
Lock-Release Lever

123941121
K0005.211108X30: RNCC: 3 | RNVC: 2
04233-211108X30: RNCC: 5 | RNVC: 2

5 Nov 2013

5340-12-355-4840
Lock-Release Lever

123554840
9154.012.4: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-377-4194
Lock-Release Lever

123774194
8605001.3.541.07: RNCC: 3 | RNVC: 2
8605001354107: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-12-364-6576
Mounting Bracket

123646576
2653-970091.000.0: RNCC: 2 | RNVC: 2
2653-970091.000.0: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-193-2746
Shimmy Damper

121932746
1683102025: RNCC: 3 | RNVC: 2
1683102025: RNCC: 5 | RNVC: 2

6 Jul 1982

5340-12-393-7696
Mechanical Stop

123937696
F44817: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-302-7033
Mending Plate

123027033
178.E3.80A: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-347-3523
Mechanical Stop

123473523
2300279-4671.08: RNCC: 2 | RNVC: 2
2300279-4671.08: RNCC: 3 | RNVC: 2
9873112: RNCC: 5 | RNVC: 2
2300279-4671.08: RNCC: 5 | RNVC: 9
9873112: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-12-172-8609
Retaining Strap

121728609
02492928: RNCC: 3 | RNVC: 2
2492928EE5011-90: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-321-8814
Angle Bracket

123218814
4353512040: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-12-339-8710
Hasp Staple

123398710
41510: RNCC: 3 | RNVC: 2
881: RNCC: 3 | RNVC: 2
W3752246: RNCC: 5 | RNVC: 2

27 Jan 1996

5340-12-314-5435
Angle Bracket

123145435
4354264440: RNCC: 3 | RNVC: 2
435 426 44 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-340-1339
Catch Strike

123401339
10 0061 651: RNCC: 3 | RNVC: 2
100061651: RNCC: 5 | RNVC: 2
0008570011: RNCC: 5 | RNVC: 2

2 Mar 1996

5340-12-305-5970
Loop Clamp

123055970
3079950001: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-190-9205
Angle Bracket

121909205
6162230141: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-391-4771
Dust And Moisture Seal Protective Cap

123914771
I000482: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-022-7102

5340-12-122-6170
Retaining Strap

121226170
4043020043: RNCC: 3 | RNVC: 2
294041100700: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-142-4231

5340-12-385-7928
Access Cover

123857928
8605025: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-12-345-9234
Access Cover

123459234
027 0136 09: RNCC: 3 | RNVC: 2
27013609: RNCC: 5 | RNVC: 2

18 May 1998

5340-12-301-2385
Angle Bracket

123012385
4179194: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-373-2963
Mending Plate

123732963
5249950159: RNCC: 3 | RNVC: 2

18 Oct 2007

5340-12-362-8773
Dust And Moisture Seal Protective Cap

123628773
1233270059: RNCC: 3 | RNVC: 2

8 Apr 2004

5340-12-362-2036
Mounting Bracket

123622036
756.1421: RNCC: 3 | RNVC: 2

23 Jan 2004

5340-12-182-8216
Resilient Mount

121828216
3475040012: RNCC: 3 | RNVC: 2

27 Feb 1980

5340-12-043-2730

5340-12-041-9816

5340-12-362-6608
Angle Bracket

123626608
S535M1061101: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-177-8460
Headless Straight Rod

121778460
5400204: RNCC: 3 | RNVC: 2

5 Mar 1979

5340-12-178-3326
Spring Tension Clip

121783326
UK11794ZIMAT: RNCC: 3 | RNVC: 2
0173618: RNCC: 5 | RNVC: 2
173618: RNCC: 5 | RNVC: 9

12 Apr 1979

5340-12-385-7849
Bumper

123857849
4609870540: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-12-385-3596
Padlock

123853596
50025055: RNCC: 3 | RNVC: 2
50025055: RNCC: 5 | RNVC: 2

26 May 2011

5340-12-176-4001
Loop Clamp

121764001
PAN4231EF4024: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-316-9908
Nonmetallic Bumper

123169908
6203230250: RNCC: 3 | RNVC: 2

1 Mar 1989

5340-12-359-4602
Retaining Strap

123594602
A3618023000200: RNCC: 3 | RNVC: 2

6 Feb 2003

5340-12-361-4809
Mounting Plate

123614809
6738110111: RNCC: 3 | RNVC: 2
673 811 01 11: RNCC: 5 | RNVC: 9

7 Oct 2003

5340-12-360-3512
Loop Clamp

123603512
0009362502: RNCC: 3 | RNVC: 2
0009362502: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-189-5237
Loop Clamp

121895237
PAN4231DEED6622: RNCC: 3 | RNVC: 2

5 Oct 1981

5340-12-379-9495
Mounting Plate

123799495
1557949: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-318-9029
Dust And Moisture Seal Protective Cap

123189029
434155: RNCC: 3 | RNVC: 2
434155: RNCC: 5 | RNVC: 2
434155: RNCC: 5 | RNVC: 9

24 Aug 1989

5340-12-311-8435
Angle Bracket

123118435
2300074-5840.00: RNCC: 2 | RNVC: 2
2300074-5840.00: RNCC: 3 | RNVC: 2
2300074-5840.00: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-306-8224
Catch Strike

123068224
54.0042.346.07: RNCC: 3 | RNVC: 2

7 Apr 1986

5340-12-342-5259
Mounting Plate

123425259
4068 311 003: RNCC: 3 | RNVC: 2
4068311003: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-12-364-2449
Mounting Bracket

123642449
4053320040: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-319-4148
Mounting Bracket

123194148
5802006-622200.00: RNCC: 2 | RNVC: 2
5802006-622200.00: RNCC: 3 | RNVC: 2

29 Sep 1989

5340-12-360-0541
Mechanical Stop

123600541
01279221: RNCC: 3 | RNVC: 2
05728564: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-12-349-5889
Friction Catch Stud Receptacle

123495889
3973: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-310-2675
Retaining Strap

123102675
2300088-310610.02: RNCC: 2 | RNVC: 2
9851204: RNCC: 3 | RNVC: 2
9851204: RNCC: 5 | RNVC: 9

30 Apr 1987

5340-12-314-1438
Nonmetallic Bumper

123141438
837.64507244: RNCC: 3 | RNVC: 2
64 5072 44: RNCC: 3 | RNVC: 2

11 Jun 1988

5340-12-333-3423
Angle Bracket

123333423
37761: RNCC: 3 | RNVC: 2

3 Dec 1993

5340-12-342-1573
Double Angle Bracket

123421573
5611530140: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-316-2934
Mending Plate

123162934
5188722: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-026-3162

5340-12-346-4595
Spring Tension Clip

123464595
912003003000: RNCC: 3 | RNVC: 2
912003003000: RNCC: 5 | RNVC: 2

28 Jul 1998

5340-12-024-2046

5340-12-326-5870
Mounting Bracket

123265870
272.376.014: RNCC: 3 | RNVC: 2
272.376 014: RNCC: 5 | RNVC: 9

10 Oct 1991

5340-12-341-7228
Container Adapter Kit

123417228
3-410.0000: RNCC: 3 | RNVC: 2
3-410.0000: RNCC: 5 | RNVC: 2

18 Oct 1996

5340-12-326-1139
Spring Loaded Cylinder Fastener

123261139
5801984-981112.000.0: RNCC: 2 | RNVC: 2
5801984-981112.000.0: RNCC: 3 | RNVC: 2

9 Aug 1991

5340-12-347-8781
Angle Bracket

123478781
52531242309: RNCC: 3 | RNVC: 2
52 53 1 242 309: RNCC: 5 | RNVC: 9

2 Mar 1999

5340-12-304-9564
Rod End Clevis

123049564
895 801 210 4: RNCC: 3 | RNVC: 2
8958012104: RNCC: 5 | RNVC: 2

10 Sep 1985

5340-12-195-5096
Loop Clamp

121955096
2851029001: RNCC: 3 | RNVC: 2

7 Mar 1983

5340-12-355-5737
Mounting Bracket

123555737
701121633B: RNCC: 3 | RNVC: 9

26 Nov 2001

5340-12-348-6259
Metallic Bumper

123486259
2069001: RNCC: 2 | RNVC: 2
2069001: RNCC: 3 | RNVC: 2
EZ20690: RNCC: 5 | RNVC: 2

28 Jul 1999

5340-12-352-1362
Mounting Plate

123521362
2300459-413500.002: RNCC: 2 | RNVC: 2
9932868: RNCC: 3 | RNVC: 2
2300459-413500.002: RNCC: 5 | RNVC: 2
2300459-413500.002: RNCC: 5 | RNVC: 9
9932868: RNCC: 5 | RNVC: 9

19 Oct 2000

5340-12-393-3547
Mounting Plate

123933547
17.060.7500.01: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-389-1344
Expansion Shield

123891344
059380: RNCC: 3 | RNVC: 2
059380: RNCC: 5 | RNVC: 2
2500610027: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-368-8667
Halter

123688667
2045-252360B00C: RNCC: 3 | RNVC: 2

2 May 2006

5340-12-040-6605

5340-12-025-8690

5340-12-184-8913
Manual Control Handle

121848913
CF205381AX: RNCC: 3 | RNVC: 2
CF 205 381 AX: RNCC: 5 | RNVC: 2
CF205381AX: RNCC: 5 | RNVC: 2
CF 205 381 AX: RNCC: 5 | RNVC: 2

26 Aug 1980

5340-12-357-7055
Multiple Angle Bracket

123577055
421950: RNCC: 3 | RNVC: 2
0006110430: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-375-8322
Access Cover

123758322
571010-NEW: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-392-6032
Dust And Moisture Seal Protective Cover

123926032
M2917920520400: RNCC: 3 | RNVC: 2

21 Jun 2013

5340-12-190-6255
Resilient Mount

121906255
K70607: RNCC: 3 | RNVC: 9

7 Dec 1981

5340-12-373-8578
Extension Drawer Slide

123738578
9BEZ005810P2: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-12-391-9054
Access Cover

123919054
DF 106 164 AR: RNCC: 3 | RNVC: 2
DF 106 164 AR: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-12-322-3053
Mounting Bracket

123223053
312712: RNCC: 3 | RNVC: 2
0100312712: RNCC: 5 | RNVC: 2
312712: RNCC: 5 | RNVC: 9

9 Aug 1990

5340-12-327-6730
Retaining Strap

123276730
A11A742420132: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-12-316-2969
Access Door

123162969
4092409: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-358-4050
Mechanical Stop

123584050
61.9802.264.07-A001: RNCC: 2 | RNVC: 2
61.9802.264.07-A001: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-12-345-8308
Mounting Bracket

123458308
6017431111: RNCC: 3 | RNVC: 2
601 743 10 11: RNCC: 5 | RNVC: 2

30 Apr 1998

5340-12-353-7703
Rod End Clevis

123537703
CBD45017P02: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-302-1426
Swivel Caster

123021426
501317: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-352-4388
Liquid Holding Unit Filler Neck

123524388
506 200 00 59: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-353-7710
Handwheel

123537710
CBD45051P04: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-197-7475
Rod End Connector

121977475
2659101: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-027-8976

5340-12-353-0571
Double Angle Bracket

123530571
54.0084.696.05: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-12-333-4471
Webbing Strap

123334471
5000.7524: RNCC: 3 | RNVC: 2
5000.7524: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-12-028-5738

5340-12-391-3513
Strap Fastener Loop

123913513
104909: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-309-3181
Plug Button

123093181
3555742: RNCC: 3 | RNVC: 2

14 Jan 1987

5340-12-347-9506
Angle Bracket

123479506
54.0058.157.02: RNCC: 2 | RNVC: 2
54.0058.157.02: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-325-7182
Double Angle Bracket

123257182
3660982439: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-318-6567
Retaining Strap

123186567
T2052033: RNCC: 3 | RNVC: 9

3 Aug 1989

5340-12-331-2826
Nonmetallic Bumper

123312826
153 427 02: RNCC: 3 | RNVC: 2
15342702: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-12-188-7980
Dust And Moisture Seal Protective Cap

121887980
4069875445: RNCC: 3 | RNVC: 2

29 Jul 1981

5340-12-325-8949
Schlosz Schluessel

123258949
308100K61: RNCC: 3 | RNVC: 2

19 Jul 1991

5340-12-194-2996
Strap Bolt

121942996
6020326: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-12-355-0382
Elastic Strap

123550382
5400049-667313.00: RNCC: 2 | RNVC: 2
5400049-667313.00: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-368-9346
Angle Bracket

123689346
0090763: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-346-1632
Mounting Bracket

123461632
TA3019P001: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-12-354-4196
Lock Key

123544196
D8 799 801 191: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-125-8362

5340-12-357-5765
Expansion Shield

123575765
0009887225: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-359-7394
Vent Plug

123597394
272.496.328: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-302-0624
Dust And Moisture Seal Protective Cap

123020624
3818200049: RNCC: 3 | RNVC: 2

29 Nov 1984

5340-12-360-9943
Mounting Bracket

123609943
0853 9583: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-351-5115
Angle Bracket

123515115
4609110716: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-311-7366
Rim Lock

123117366
4010 RAL6031: RNCC: 3 | RNVC: 2
10 0000 816: RNCC: 5 | RNVC: 2
100000816: RNCC: 5 | RNVC: 2
4010NLINKS RAL6031: RNCC: 5 | RNVC: 2
0007430135: RNCC: 5 | RNVC: 2
4010: RNCC: 5 | RNVC: 9

13 Oct 1987

5340-12-342-1584
Angle Bracket

123421584
536L02034: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-028-5878

5340-12-180-9151
Door Button

121809151
81669365008: RNCC: 3 | RNVC: 2

11 Oct 1979

5340-12-042-0836

5340-12-314-0432
Double Angle Bracket

123140432
4355510240: RNCC: 3 | RNVC: 2

1 Jun 1988

5340-12-365-8924
Dust And Moisture Seal Protective Plug

123658924
9419980090: RNCC: 3 | RNVC: 2

16 Feb 2005

5340-12-175-2151
Angle Bracket

121752151
51974800151: RNCC: 3 | RNVC: 2

30 Aug 1978

5340-12-361-0515
Access Cover

123610515
58R104-82: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-042-3624

5340-12-319-5395
Bridge Clamp

123195395
203145-4000: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-352-9051
Access Cover

123529051
1311 307 054: RNCC: 3 | RNVC: 2
1311307054: RNCC: 5 | RNVC: 2

4 Jan 2001

5340-12-011-6365

5340-12-182-0180
Mounting Bracket

121820180
01TC31815: RNCC: 3 | RNVC: 2

7 Jan 1980

5340-12-194-1359
Lock-Release Lever

121941359
4062600041: RNCC: 3 | RNVC: 2

5 Oct 1982

5340-12-307-2456
Angle Bracket

123072456
RP988843: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-368-3714
Mounting Plate

123683714
5622000240: RNCC: 3 | RNVC: 2
562 200 02 40: RNCC: 5 | RNVC: 2

1 Mar 2006

5340-12-369-4022
Runner

123694022
3035343: RNCC: 3 | RNVC: 2
3035.343: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-316-7192
Mounting Plate

123167192
2300035-230330.17: RNCC: 2 | RNVC: 2
2300035-230330.17: RNCC: 5 | RNVC: 9
2300035-230330.17: RNCC: 5 | RNVC: 9

7 Feb 1989

5340-12-330-0452
Nonmetallic Bumper

123300452
98405801: RNCC: 3 | RNVC: 2
PLATTE1000X1000X3MM.NR65: RNCC: 5 | RNVC: 2
98405801.NR65: RNCC: 5 | RNVC: 2

27 Oct 1992

5340-12-328-9218
Plug Button

123289218
6419880035: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-701-2019
Retaining Bail

127012019
5.12.0603.8610.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-3521
Extension Drawer Slide

123223521
5.043.312.9: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-354-4609
Mounting Bracket

123544609
2300246-261783.00.0: RNCC: 2 | RNVC: 2
2300246-261783.00.0: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-12-172-1246
Clamp Bolt Assembly

121721246
N00A0400231004B: RNCC: 3 | RNVC: 2
00004231004B: RNCC: 5 | RNVC: 2
00004231004B: RNCC: 5 | RNVC: 9
N00A0400231004B: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-193-9451
Nonmetallic Bumper

121939451
1124270086: RNCC: 3 | RNVC: 2

16 Sep 1982

5340-12-375-6131
Snap Hook

123756131
CBD45134G01: RNCC: 3 | RNVC: 2

18 Jun 2008

5340-12-196-4074
Access Cover

121964074
132.530.3022: RNCC: 3 | RNVC: 2
132.530.3022: RNCC: 5 | RNVC: 2

4 Jul 1983

5340-12-090-2238

5340-12-367-7017
Access Cover

123677017
T524M1227082: RNCC: 3 | RNVC: 2

28 Sep 2005

5340-12-011-5316

5340-12-044-2898

5340-12-196-7085
Electrical-Mechanical Equipment Post

121967085
RP981813: RNCC: 3 | RNVC: 2

4 Aug 1983

5340-12-385-9126
Rigid Caster

123859126
14K200E-20: RNCC: 3 | RNVC: 2

20 Jul 2011

5340-12-357-5181
Access Cover

123575181
0009122735: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-094-6982

5340-12-367-4851
Spacing Threaded Standoff

123674851
701804719A: RNCC: 3 | RNVC: 2

24 Aug 2005

5340-12-349-7880
Angle Bracket

123497880
105-61041.01: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-132-2988
Loop Clamp

121322988
115M14004: RNCC: 3 | RNVC: 2
115M14004E1: RNCC: 5 | RNVC: 2
501516004: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-091-3437

5340-12-391-6310
Access Cover

123916310
C200107: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-328-9112
Loop Clamp

123289112
160-75606: RNCC: 3 | RNVC: 2
160-75606: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-349-3445
Dust And Moisture Seal Protective Plug

123493445
37 13 08 01: RNCC: 3 | RNVC: 2
37130801: RNCC: 5 | RNVC: 2

29 Oct 1999

5340-12-125-4469

5340-12-358-9239
Angle Bracket

123589239
3854313440: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-359-4335
Webbing Strap

123594335
16352000: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-181-9538
Butt Hinge Leaf

121819538
01TC31814: RNCC: 3 | RNVC: 2

28 Dec 1979

5340-12-353-1164
Loop Clamp

123531164
EN4114F34WH1: RNCC: 2 | RNVC: 2

30 Jan 2001

5340-12-324-2829
Metallic Solid Wheel

123242829
1715621: RNCC: 3 | RNVC: 2
1715621: RNCC: 5 | RNVC: 9

1 Feb 1991

5340-12-305-6097
Mending Plate

123056097
502173: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-349-1909
Metal Grille

123491909
9005917 059: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-336-2578
Detent Plunger

123362578
0731 201 322: RNCC: 3 | RNVC: 2
0731201322: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-316-7193
Mending Plate

123167193
2300035-230330.14: RNCC: 2 | RNVC: 2
2300035-230330.14: RNCC: 5 | RNVC: 9
2300035-230330.14: RNCC: 5 | RNVC: 9

7 Feb 1989

5340-12-309-2323
Nonmetallic Bumper

123092323
8700780038: RNCC: 3 | RNVC: 2

30 Dec 1986

5340-12-335-5597
Dust And Moisture Seal Protective Cap

123355597
382365709: RNCC: 3 | RNVC: 2
77676: RNCC: 5 | RNVC: 2
530 474: RNCC: 5 | RNVC: 2
77695: RNCC: 5 | RNVC: 2
AN530474: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-12-387-0603
Block Clamp

123870603
58080178: RNCC: 3 | RNVC: 2
CV190750: RNCC: 5 | RNVC: 2
58080178: RNCC: 5 | RNVC: 2

2 Nov 2011

5340-12-368-9600
Multiple Angle Bracket

123689600
7803061150: RNCC: 2 | RNVC: 2
7803061150: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-358-0153
Mounting Bracket

123580153
6524921441: RNCC: 3 | RNVC: 2
652 492 1441: RNCC: 5 | RNVC: 2

2 Sep 2002

5340-12-360-9922
Cushioning Pad

123609922
13843302: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-367-1395
Nonmetallic Solid Wheel

123671395
29001216: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-12-367-5249
Retaining Clip

123675249
171711561A: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-379-4987
Spring Tension Clip

123794987
THF220 17: RNCC: 3 | RNVC: 2

30 Jul 2009

5340-12-315-1851
Mending Plate

123151851
2500121-880000.01: RNCC: 2 | RNVC: 2
2500121-880000.01: RNCC: 3 | RNVC: 2
2500121-880000.01: RNCC: 5 | RNVC: 9

28 Sep 1988

5340-12-156-7437
Flush Lock

121567437
101292001: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-335-0624
Angle Bracket

123350624
0048-201000A03B: RNCC: 2 | RNVC: 2
0048-201000A03B: RNCC: 3 | RNVC: 2

19 Jul 1994

5340-12-300-6741
Double Angle Bracket

123006741
4354923241: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-364-6591
Multiple Angle Bracket

123646591
54.0084.172.01: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-367-8200
Lock Key

123678200
30806: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-12-378-3583
Loop Clamp

123783583
HRL6KP53PA: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-319-4610
Double Angle Bracket

123194610
504226: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-384-6735
Shimmy Damper

123846735
0000380101: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-12-368-2928
Door Handle

123682928
5754100: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-12-090-0549

5340-12-126-0304

5340-12-317-2535
Mending Plate

123172535
CF 311 780: RNCC: 3 | RNVC: 2
CF 311 780: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-314-2439
Mounting Bracket

123142439
272.317 733: RNCC: 2 | RNVC: 2
272.317.733: RNCC: 3 | RNVC: 2
272.317 733: RNCC: 5 | RNVC: 9

21 Jun 1988

5340-12-319-6561
Mounting Bracket

123196561
504548: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-310-1899
Gummi- Riemen

123101899
4617780276: RNCC: 3 | RNVC: 2
7211762271: RNCC: 5 | RNVC: 9

15 Apr 1987

5340-12-358-5468
Multiple Angle Bracket

123585468
5411300340: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-360-0025
Mounting Bracket

123600025
9414299568: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-025-3147

5340-12-300-6676
Dust And Moisture Seal Protective Plug

123006676
F0586: RNCC: 3 | RNVC: 2
4259970386: RNCC: 5 | RNVC: 2
4259970386: RNCC: 5 | RNVC: 2
A4259970386: RNCC: 5 | RNVC: 2

22 Aug 1984

5340-12-374-4824
Spacing Threaded Standoff

123744824
L851M1805206: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-12-350-4176
Butt Hinge Leaf

123504176
J52424022-001: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-325-6545
Angle Bracket

123256545
3018900213: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-328-9077
Loop Clamp

123289077
072130541: RNCC: 3 | RNVC: 2
072130541: RNCC: 5 | RNVC: 2
072 130 541: RNCC: 5 | RNVC: 2
072 130 541: RNCC: 5 | RNVC: 2
072 130 541: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-358-1922
Manual Control Lever

123581922
14.20.20: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-179-0691
Nonmetallic Bumper

121790691
CF 432 172: RNCC: 2 | RNVC: 2
CF 432 172: RNCC: 3 | RNVC: 2
CF 432 172: RNCC: 5 | RNVC: 2
CF432172: RNCC: 5 | RNVC: 2
CF 432 172: RNCC: 5 | RNVC: 2
CF432172: RNCC: 5 | RNVC: 2
CF432172: RNCC: 5 | RNVC: 2

6 Jun 1979

5340-12-304-5876
Helical Compression Spring Seat

123045876
1410120090: RNCC: 3 | RNVC: 2

1 Aug 1985

5340-12-179-2791
Halter

121792791
4353020110: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-361-4810
Mounting Bracket

123614810
4375242840: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-311-4145
Dust And Moisture Seal Protective Plug

123114145
2860009000: RNCC: 3 | RNVC: 2
2860 009 000: RNCC: 5 | RNVC: 2

31 Aug 1987

5340-12-025-3564

5340-12-349-8665
Angle Bracket

123498665
T212M3002101: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-12-365-9956
Mounting Bracket

123659956
9425403240: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-12-309-7781
Dust And Moisture Seal Protective Cap

123097781
200Z14X15RAL3000: RNCC: 3 | RNVC: 2
200Z14X15ROUGE: RNCC: 5 | RNVC: 2
200141520: RNCC: 5 | RNVC: 2
K7500: RNCC: 5 | RNVC: 2
200Z14X15RAL3000: RNCC: 5 | RNVC: 2
GPN200Z14X15RAL3000: RNCC: 5 | RNVC: 2
200Z14X15 ROT: RNCC: 5 | RNVC: 9
GPN200,Z14X15,ROT: RNCC: 5 | RNVC: 9

27 Feb 1987

5340-12-304-2569
Spring Tension Clip

123042569
5802079-870: RNCC: 2 | RNVC: 2
5802079-870: RNCC: 3 | RNVC: 2
5802079-870: RNCC: 5 | RNVC: 9

3 Jul 1985

5340-12-326-5785
Dust And Moisture Seal Protective Plug

123265785
5000715: RNCC: 3 | RNVC: 2
50 00 715: RNCC: 5 | RNVC: 9

9 Oct 1991

5340-12-308-9745
Double Angle Bracket

123089745
2859070164: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-12-312-7461
Strapping Seal

123127461
6490964: RNCC: 3 | RNVC: 2
1069654: RNCC: 5 | RNVC: 2

2 Feb 1988

5340-12-302-7880
Handle Grip

123027880
CF 493 090 AU: RNCC: 3 | RNVC: 2
CF 493 090 AU: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-339-2343
Antipilferage Seal

123392343
81254340051: RNCC: 3 | RNVC: 2
81.25434.0051: RNCC: 5 | RNVC: 2
7704534: RNCC: 5 | RNVC: 2

27 Oct 1995

5340-12-325-6139
Protection Bellows

123256139
0002680396: RNCC: 3 | RNVC: 2

21 Jun 1991

5340-12-094-1998

5340-12-044-3685

5340-12-310-5291
Nonmetallic Bumper

123105291
78203 44574: RNCC: 2 | RNVC: 2
7820344574: RNCC: 3 | RNVC: 2
78203 44574: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-359-2352
Mounting Bracket

123592352
9425500740: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-090-1321

5340-12-011-5331

5340-12-023-0950

5340-12-382-3433
Rod End Connector

123823433
SZ 2527.000: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-361-5446
Webbing Strap

123615446
01155-2-01414FE250-LE750: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-161-2277
Loop Clamp

121612277
LN29849-5: RNCC: 2 | RNVC: 2
5LN29849: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-342-0496
Access Cover

123420496
9.02.017.141: RNCC: 3 | RNVC: 2
3.07.479.188: RNCC: 5 | RNVC: 2

4 Dec 1996

5340-12-185-2184
Door Handle

121852184
21L2-1: RNCC: 3 | RNVC: 2

20 Sep 1980

5340-12-303-9881
Retaining Strap

123039881
K6269: RNCC: 3 | RNVC: 2
KLPKSF88.30-1: RNCC: 5 | RNVC: 2

29 May 1985

5340-12-337-2111
Retaining Strap

123372111
181323701: RNCC: 2 | RNVC: 2
181323701: RNCC: 3 | RNVC: 2
E 18 1 32 3701: RNCC: 5 | RNVC: 2

2 Feb 1995

5340-12-338-7253
Mending Plate

123387253
4900059-751100.004.0: RNCC: 3 | RNVC: 2
1227954: RNCC: 5 | RNVC: 2

21 Aug 1995

5340-12-190-2786
Buckle

121902786
0483B VERZINKT: RNCC: 3 | RNVC: 2
0483 B VERZINKT: RNCC: 5 | RNVC: 2
0483B20MMEISEN: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-328-9702
Webbing Strap

123289702
2654-971121.00: RNCC: 2 | RNVC: 2
2654-971121.00: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-337-9562
Lock-Release Lever

123379562
4667601: RNCC: 3 | RNVC: 2
GZ46266: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-311-1208
Strap Fastener Loop

123111208
AFG009720: RNCC: 3 | RNVC: 2

28 Jul 1987

5340-12-162-9638
Retaining Strap

121629638
5900901841: RNCC: 3 | RNVC: 2
5900901841: RNCC: 5 | RNVC: 2
5900901841: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-332-9900
Dust And Moisture Seal Protective Plug

123329900
600B1015: RNCC: 3 | RNVC: 2
GPN600B1015: RNCC: 5 | RNVC: 2
81960020058: RNCC: 5 | RNVC: 2
81.96002.0058: RNCC: 5 | RNVC: 2
B1015: RNCC: 5 | RNVC: 9

19 Oct 1993

5340-12-323-5960
Mounting Bracket

123235960
2982371116: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-043-2670

5340-12-392-4170
Helical Compression Spring Retainer

123924170
E225317: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-183-2521
Angle Bracket

121832521
51974800324: RNCC: 3 | RNVC: 2
5000498383: RNCC: 5 | RNVC: 2
5000498383: RNCC: 5 | RNVC: 9

28 Mar 1980

5340-12-392-4116
Loop Clamp

123924116
I006060: RNCC: 3 | RNVC: 2
4052063060602: RNCC: 5 | RNVC: 2

5 Jun 2013

5340-12-387-9276
Mounting Bracket

123879276
7093713: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-092-3835

5340-12-308-8121
Dust And Moisture Seal Protective Cap

123088121
H0955: RNCC: 3 | RNVC: 2
62500 813.010: RNCC: 5 | RNVC: 2

18 Nov 1986

5340-12-359-8090
Dust And Moisture Seal Protective Cap

123598090
04187700: RNCC: 3 | RNVC: 2
07231132: RNCC: 5 | RNVC: 2

11 Mar 2003

5340-12-304-2652
Electrical-Mechanical Equipment Post

123042652
5802016-650030.00: RNCC: 2 | RNVC: 2
444011: RNCC: 5 | RNVC: 9
5802016-650030.00: RNCC: 5 | RNVC: 9

4 Jul 1985

5340-12-149-0943
Retaining Strap

121490943
28209951920: RNCC: 3 | RNVC: 2
8209951920: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-374-2933
Section Block Clamp

123742933
5324976: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-383-4641
Helical Compression Spring Seat

123834641
5560431: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-12-374-5221
Manual Control Lever

123745221
L521M1820101: RNCC: 3 | RNVC: 2

22 Feb 2008

5340-12-360-0782
Access Cover

123600782
9418460425: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-382-4611
Mounting Bracket

123824611
623103: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-12-318-5726
Access Cover

123185726
4493501: RNCC: 3 | RNVC: 2

28 Jul 1989

5340-12-375-0782
Rod End Clevis

123750782
938004177: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-12-353-7081
Loop Clamp

123537081
97710212280: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-333-2013
Handle Grip

123332013
00098376740: RNCC: 3 | RNVC: 9
9837674: RNCC: 5 | RNVC: 9
108-4404000.000: RNCC: 5 | RNVC: 9

9 Nov 1993

5340-12-379-5386
Angle Bracket

123795386
S535M1007237: RNCC: 3 | RNVC: 2

5 Aug 2009

5340-12-333-6690
Resilient Mount

123336690
1H0199609F: RNCC: 3 | RNVC: 9

20 Jan 1994

5340-12-169-3064
Plain Solid Disk

121693064
CF 446 584: RNCC: 2 | RNVC: 2
CF 446 584: RNCC: 3 | RNVC: 2
CF 446 584: RNCC: 5 | RNVC: 2
CF446584: RNCC: 5 | RNVC: 2
CF 446 584: RNCC: 5 | RNVC: 2
CF446584: RNCC: 5 | RNVC: 2
CF446584: RNCC: 5 | RNVC: 2

4 May 1977

5340-12-317-2996
Retaining Strap

123172996
3229950520: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-333-4898
Protection Bellows

123334898
897 751 520 4: RNCC: 3 | RNVC: 2
000 353 02 91: RNCC: 5 | RNVC: 2
0003530291: RNCC: 5 | RNVC: 2

22 Dec 1993

5340-12-312-8165
Mending Plate

123128165
1068885: RNCC: 2 | RNVC: 2
1068885: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-12-381-9101
Angle Bracket

123819101
000605-204000.04: RNCC: 2 | RNVC: 2
000605-204000.04: RNCC: 3 | RNVC: 2
39135: RNCC: 5 | RNVC: 2

16 Apr 2010

5340-12-386-5195
Mounting Plate

123865195
1.314-201150.02: RNCC: 2 | RNVC: 2
1.314-201150.02: RNCC: 5 | RNVC: 2

8 Sep 2011

5340-12-354-2722
Helical Compression Spring Seat

123542722
1658-381000.002.0: RNCC: 2 | RNVC: 2
1658-381000.002.0: RNCC: 3 | RNVC: 2

26 Jun 2001

5340-12-383-3443
Plug Button

123833443
1616214: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-12-393-7693
Suction Cup

123937693
1.1.4010: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-132-3022

5340-12-196-2533
Access Cover

121962533
00947501: RNCC: 3 | RNVC: 2
03567002: RNCC: 5 | RNVC: 2

20 Jun 1983

5340-12-369-4026
Lock Bolt

123694026
3042192: RNCC: 3 | RNVC: 2
3042.192: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-333-1802
Support Hook

123331802
81429025173: RNCC: 2 | RNVC: 2
81429025173: RNCC: 3 | RNVC: 2
81.42902.5173: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-12-172-6156
Retaining Strap

121726156
021129727B: RNCC: 3 | RNVC: 2

31 Jan 1978

5340-12-318-8308
Access Hole Frame

123188308
5802017-711411.00: RNCC: 2 | RNVC: 2
5802017-711411.00: RNCC: 3 | RNVC: 2

21 Aug 1989

5340-12-365-7250
Manual Control Handle

123657250
5802017-702140.02: RNCC: 2 | RNVC: 2
5802017-702140.02: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-12-372-6730
Casement Fastener

123726730
SZ2485.100: RNCC: 3 | RNVC: 2
2485.100: RNCC: 5 | RNVC: 2

9 Aug 2007

5340-12-305-1670
Helical Compression Spring Retainer

123051670
01TC34538: RNCC: 3 | RNVC: 2

3 Oct 1985

5340-12-043-2717

5340-12-331-2505
Webbing Strap

123312505
591511177: RNCC: 3 | RNVC: 2
SKA3771: RNCC: 5 | RNVC: 2

7 Apr 1993

5340-12-388-6156
Access Cover

123886156
5842030186: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-388-1610
Spacing Threaded Standoff

123881610
2902440070ENG: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-190-8769
Helical Compression Spring Seat

121908769
2410320073: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-365-1335
Mounting Bracket

123651335
1837-199820.000.0: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-318-3472
Mending Plate

123183472
6481.003.4: RNCC: 3 | RNVC: 2

6 Jul 1989

5340-12-392-3382
Mounting Bracket

123923382
4100095-986193.000.0: RNCC: 2 | RNVC: 2
4100095-986193.000.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-390-5365
Coat And Hat Hook

123905365
DIN81407-F-MS-M: RNCC: 2 | RNVC: 2

21 Nov 2012

5340-12-177-5559
Headless Straight Rod

121775559
WL636-3: RNCC: 3 | RNVC: 2
WL636-3: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-365-9411
Mounting Bracket

123659411
9304297440: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-12-309-9116
Rod End Clevis

123099116
320-992119: RNCC: 3 | RNVC: 2

18 Mar 1987

5340-12-146-6789
Retaining Strap

121466789
10567P4: RNCC: 3 | RNVC: 2
10567P4: RNCC: 5 | RNVC: 2
10567P4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-306-3815
Butt Hinge Leaf

123063815
4066210152: RNCC: 3 | RNVC: 2

25 Feb 1986

5340-12-385-7394
Mounting Bracket

123857394
5351860040: RNCC: 3 | RNVC: 2

5 Jul 2011

5340-12-352-1433
Mounting Plate

123521433
0554.1782: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-12-377-3724
Expansion Shield

123773724
0009905592: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-377-7255
Angle Bracket

123777255
2300476-987295.000: RNCC: 2 | RNVC: 2
2300476-987295.000: RNCC: 3 | RNVC: 2
2300476-987295.000: RNCC: 5 | RNVC: 9

6 Feb 2009

5340-12-374-2928
Loop Clamp

123742928
5323682: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-164-8451
Resilient Mount

121648451
48690.NR55.ST: RNCC: 3 | RNVC: 2
48690FLCN5590: RNCC: 3 | RNVC: 2
48690SM550: RNCC: 5 | RNVC: 2
48690,FLCN5590: RNCC: 5 | RNVC: 2
48690SM550: RNCC: 5 | RNVC: 2
48690FLCN5590: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-3052
Protection Bellows

123223052
289540: RNCC: 3 | RNVC: 2
289540E84088: RNCC: 5 | RNVC: 2

9 Aug 1990

5340-12-184-9965
Nonmetallic Bumper

121849965
CF409977CR: RNCC: 3 | RNVC: 2
CF 409 977 CR: RNCC: 5 | RNVC: 2
CF409977CR: RNCC: 5 | RNVC: 2
CF 409 977 CR: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-323-1502
Mounting Bracket

123231502
6012020840: RNCC: 3 | RNVC: 2

29 Oct 1990

5340-12-300-8009
Angle Bracket

123008009
4252601260: RNCC: 3 | RNVC: 2

31 Aug 1984

5340-12-300-2697
Mending Plate

123002697
A11A121110481: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-334-0753
Access Cover

123340753
01TC34478: RNCC: 3 | RNVC: 2

17 Mar 1994

5340-12-374-3822
Flush Bolt

123743822
L521M3091101: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-197-0752
Webbing Strap

121970752
4357337020: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-362-8030
Mounting Plate

123628030
10023746: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-338-3227
Access Door

123383227
1189601: RNCC: 3 | RNVC: 2
EZ11896: RNCC: 5 | RNVC: 2

23 Jun 1995

5340-12-343-5523
Mounting Plate

123435523
56010310040: RNCC: 3 | RNVC: 2
F300 0T 022 5252: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-385-4272
Angle Bracket

123854272
8350780441: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-326-9495
Helical Compression Spring Retainer

123269495
6403454: RNCC: 3 | RNVC: 2

13 Nov 1991

5340-12-340-5465
Mounting Bracket

123405465
5901803340: RNCC: 3 | RNVC: 2
5901803340: RNCC: 5 | RNVC: 2
590 180 33 40: RNCC: 5 | RNVC: 2
5901803340: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-163-3530
Pipe Hanger Extension Bar

121633530
5900781941: RNCC: 3 | RNVC: 2
5900781941: RNCC: 5 | RNVC: 2
5900781941: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-1761
Expansion Plug

121991761
3460180011: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-024-9935

5340-12-135-6504

5340-12-091-7278

5340-12-377-1722
Mounting Bracket

123771722
41229984: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-348-0334
Mounting Bracket

123480334
300.001.266: RNCC: 2 | RNVC: 2
300.001.266: RNCC: 3 | RNVC: 2
300.001 266: RNCC: 5 | RNVC: 2

30 Mar 1999

5340-12-300-9084
Lock-Release Lever

123009084
0006312055: RNCC: 3 | RNVC: 2

11 Sep 1984

5340-12-319-6087
Access Cover

123196087
297773: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-12-197-9120
Angle Bracket

121979120
CF 478 189 B: RNCC: 3 | RNVC: 2
CF 478 189 B: RNCC: 5 | RNVC: 2
CF 478 189 A: RNCC: 5 | RNVC: 2
CF 478 189 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-311-8110
Dust And Moisture Seal Protective Cap

123118110
Z 105000430: RNCC: 3 | RNVC: 9
0008691472: RNCC: 5 | RNVC: 2
Z 105000430: RNCC: 5 | RNVC: 9

19 Oct 1987

5340-12-394-3345
Multiple Angle Bracket

123943345
1000582-5: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-12-306-3377
Double Angle Bracket

123063377
5801984-984500.002.0: RNCC: 2 | RNVC: 2
5801984-984500.002.0: RNCC: 3 | RNVC: 2

20 Feb 1986

5340-12-366-4802
Lock Spindle

123664802
2 0061-882: RNCC: 3 | RNVC: 2
2 0061-882: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-12-337-1397
Mending Plate

123371397
52.3112.310.03: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-12-329-2367
Access Cover

123292367
2215: RNCC: 3 | RNVC: 2

25 Jul 1992

5340-12-305-4545
Angle Bracket

123054545
6352091: RNCC: 3 | RNVC: 2

8 Nov 1985

5340-12-307-2763
Loop Clamp

123072763
B16BX36TAN15836: RNCC: 3 | RNVC: 2
B16BX36TAN15836: RNCC: 3 | RNVC: 2

28 May 1986

5340-12-125-2069

5340-12-157-6803

5340-12-161-9731
Helical Compression Spring Seat

121619731
1420500050: RNCC: 3 | RNVC: 2
000N05538: RNCC: 5 | RNVC: 2
1 420 500 050: RNCC: 5 | RNVC: 2
EPMS73S1X: RNCC: 5 | RNVC: 2
0003002830: RNCC: 5 | RNVC: 2
3002830: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-392-5080
Retaining Bail

123925080
4100095-986176.000.0: RNCC: 2 | RNVC: 2
4100095-986176.000.0: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-12-193-2029
Angle Bracket

121932029
4608300914: RNCC: 3 | RNVC: 2
721 1 88 251 2: RNCC: 5 | RNVC: 9

30 Jun 1982

5340-12-199-4004
Handle Grip

121994004
320.891.04-570.2: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-319-8862
Lock-Release Lever

123198862
4.3011: RNCC: 3 | RNVC: 2
08123406: RNCC: 5 | RNVC: 2

14 Nov 1989

5340-12-331-1436
Manual Control Lever

123311436
128.019.7: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-12-326-4661
Double Angle Bracket

123264661
S 721 1 12 019 1: RNCC: 3 | RNVC: 9
4604920541: RNCC: 5 | RNVC: 2

19 Sep 1991

5340-12-342-3283
Dust And Moisture Seal Protective Cap

123423283
371389: RNCC: 3 | RNVC: 2
4.537.14: RNCC: 5 | RNVC: 2
371 389: RNCC: 5 | RNVC: 2

23 Jan 1997

5340-12-197-9117
Angle Bracket

121979117
CF 215 477 B: RNCC: 3 | RNVC: 2
CF 215 477 A: RNCC: 5 | RNVC: 2
CF 215 477 B: RNCC: 5 | RNVC: 2
CF 215 477 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-377-3176
Double Angle Bracket

123773176
41218119: RNCC: 3 | RNVC: 2

8 Jan 2009

5340-12-180-6551
Mounting Bracket

121806551
81613500029: RNCC: 3 | RNVC: 2
81.61350.0029: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-356-9857
Threaded Rod End

123569857
8811420028: RNCC: 3 | RNVC: 2

23 Apr 2002

5340-12-197-0009

5340-12-142-4222

5340-12-307-3559
Mending Plate

123073559
2300041-180220.04: RNCC: 2 | RNVC: 2
790-52.20.114-02: RNCC: 3 | RNVC: 2
2300041-180220.04: RNCC: 5 | RNVC: 9

9 Jun 1986

5340-12-169-7546
Retaining Strap

121697546
JJ45594: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-321-4279
Angle Bracket

123214279
1654701: RNCC: 3 | RNVC: 2

17 May 1990

5340-12-175-1860
Angle Bracket

121751860
02533765: RNCC: 3 | RNVC: 2
2533765ED5091-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-383-2007
Dust And Moisture Seal Protective Plug

123832007
K151: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-12-379-5846
Access Cover

123795846
4149 306 012: RNCC: 3 | RNVC: 2

12 Aug 2009

5340-12-364-2427
Angle Bracket

123642427
4052611040: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-314-8580
Spring Tension Clip

123148580
2360-261125.01.0: RNCC: 2 | RNVC: 2
2360-261125.01.0: RNCC: 3 | RNVC: 2
2360-261125.01.0: RNCC: 5 | RNVC: 2

19 Aug 1988

5340-12-186-3763
Webbing Strap

121863763
2730505000: RNCC: 3 | RNVC: 2

18 Dec 1980

5340-12-381-8325
Mounting Plate

123818325
5061553527: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-12-339-0654
Webbing Strap

123390654
4618900171: RNCC: 3 | RNVC: 2
510066: RNCC: 5 | RNVC: 2
4618900171: RNCC: 5 | RNVC: 2

5 Oct 1995

5340-12-199-4824
Retaining Strap

121994824
7801850038: RNCC: 3 | RNVC: 2
78018 50038: RNCC: 5 | RNVC: 9

1 May 1984

5340-12-353-4911
Access Cover

123534911
4442010003: RNCC: 3 | RNVC: 2
444 201 00 03: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-143-6500
Loop Clamp

121436500
1369950101: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-363-8343
Access Cover

123638343
0420 8300: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-12-319-7450
Resilient Mount

123197450
5612370211: RNCC: 3 | RNVC: 2
561 237 02 11: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-369-6248
Multiple Angle Bracket

123696248
5172370840: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-12-328-9612
Spring Tension Clip

123289612
105-853321.03: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-044-5922

5340-12-302-7274
Bow Handle

123027274
5801209-61: RNCC: 3 | RNVC: 2
5801209-61: RNCC: 5 | RNVC: 9

25 Jan 1985

5340-12-311-7177
Helical Compression Spring Retainer

123117177
01TC34931: RNCC: 3 | RNVC: 2

9 Oct 1987

5340-12-348-1683
Mechanical Stop

123481683
5310001015: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-12-094-4040

5340-12-321-7827
Access Door

123217827
54.2322.718.00: RNCC: 2 | RNVC: 2
54.2322.718.00: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-12-360-4099
Cushioning Pad

123604099
0009641356: RNCC: 3 | RNVC: 2
0009641356: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-393-1676
Block Clamp

123931676
06.66022-1301: RNCC: 3 | RNVC: 2
06.66022-1301: RNCC: 5 | RNVC: 2

14 Aug 2013

5340-12-387-8490
Spring Tension Clip

123878490
7094036: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-305-0062
Angle Bracket

123050062
0214 7894: RNCC: 3 | RNVC: 2
02147894EE0148-20: RNCC: 5 | RNVC: 2

17 Sep 1985

5340-12-041-5765

5340-12-181-1073
Hinge Torsion Bar

121811073
81614450001: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-042-5430

5340-12-338-1587
Access Door

123381587
2415650103: RNCC: 3 | RNVC: 2
2 415 650 103: RNCC: 5 | RNVC: 2

30 May 1995

5340-12-309-4057
Access Cover

123094057
WW 315 308 B: RNCC: 2 | RNVC: 2
WW 315 308 B: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-382-1963
Multiple Angle Bracket

123821963
8605059.3.003.01: RNCC: 3 | RNVC: 2

20 May 2010

5340-12-197-0517
Nonmetallic Bumper

121970517
6382.999.4: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-326-3051
Double Angle Bracket

123263051
3964750140: RNCC: 3 | RNVC: 2
396 475 01 40: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-12-373-0638
Retaining Strap

123730638
1299950120: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-12-372-4104
Mounting Bracket

123724104
P70180 802003: RNCC: 2 | RNVC: 2
P70180 802003: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-359-7305
Mending Plate

123597305
S281M2008101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-349-4960
Mechanical Stop

123494960
576.999.440: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-313-8680
Mending Plate

123138680
6215440638: RNCC: 3 | RNVC: 2
621 544 06 38: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-314-8150
Flare Lock Fastener

123148150
12911: RNCC: 3 | RNVC: 2
264631: RNCC: 5 | RNVC: 9

12 Aug 1988

5340-12-337-8625
Access Hole Frame

123378625
2500134-592000.00: RNCC: 2 | RNVC: 2
2500134-592000.00: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-12-323-6066
Handle Grip

123236066
01TC35347: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-363-2903
Catch Strike

123632903
599.076.007.023: RNCC: 3 | RNVC: 2
81668022152: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-354-9065
Mechanical Stop

123549065
5400049-621140.00: RNCC: 2 | RNVC: 2
5400049-621140.00: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-196-2749
Handle Grip

121962749
KG-T2: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-322-2036
Lock-Release Lever

123222036
100000700: RNCC: 2 | RNVC: 2
100000700: RNCC: 3 | RNVC: 2
10 0000 700: RNCC: 5 | RNVC: 9
10 0000 700: RNCC: 5 | RNVC: 9

1 Aug 1990

5340-12-342-4852
Mounting Bracket

123424852
4617100236: RNCC: 3 | RNVC: 2
461 710 02 36: RNCC: 5 | RNVC: 2

18 Feb 1997

5340-12-199-3837
Retaining Strap

121993837
52.9794.000.03: RNCC: 3 | RNVC: 2
52.9794.000.03: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-181-7816
Door Handle

121817816
183845727B: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-336-2636
Nut And Bolt Locking Plate

123362636
4620 303 108: RNCC: 3 | RNVC: 2
4620303108: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-392-2785
Webbing Strap

123922785
3002249: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-347-2218
Angle Bracket

123472218
1216 2571: RNCC: 3 | RNVC: 2
6.232.0.982.002.4: RNCC: 5 | RNVC: 9

13 Nov 1998

5340-12-333-5831
Screw Thread Insert And Tool Assortment

123335831
0185 1160 024: RNCC: 3 | RNVC: 2
C 5791 317 B: RNCC: 5 | RNVC: 2
01851160024: RNCC: 5 | RNVC: 2
C 5791 317 B: RNCC: 5 | RNVC: 2
C5791317B: RNCC: 5 | RNVC: 9

7 Jan 1994

5340-12-388-6644
Mounting Bracket

123886644
1030120-400300.003.0: RNCC: 2 | RNVC: 2
1030120-400300.003.0: RNCC: 3 | RNVC: 2

11 Apr 2012

5340-12-392-8720
Mounting Bracket

123928720
1030229-205130.000.0: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-323-0948
Pipe Bracket

123230948
1204 6755: RNCC: 3 | RNVC: 2
3.603.0.637.015.7: RNCC: 5 | RNVC: 2

23 Oct 1990

5340-12-368-7406
Angle Bracket

123687406
101.102.4: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-12-340-5464
T Bracket

123405464
5901701439: RNCC: 3 | RNVC: 2
5901701439: RNCC: 5 | RNVC: 2
5901701439: RNCC: 5 | RNVC: 2
590 170 14 39: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-146-0407
Retaining Strap

121460407
6152325: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-182-8963
Retaining Strap

121828963
2211028705: RNCC: 3 | RNVC: 2
22110 28705: RNCC: 5 | RNVC: 9

4 Mar 1980

5340-12-329-0083
Access Cover

123290083
81.61446.0007: RNCC: 3 | RNVC: 2

8 Jul 1992

5340-12-359-7622
Bow Handle

123597622
50164: RNCC: 3 | RNVC: 2

7 Mar 2003

5340-12-316-8782
Mounting Bracket

123168782
KS6030: RNCC: 3 | RNVC: 2
0513930: RNCC: 5 | RNVC: 2

20 Feb 1989

5340-12-374-0754
Snap Hook

123740754
WTG800125: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-12-193-7313
Lock-Release Lever

121937313
MA2712161: RNCC: 3 | RNVC: 2
GMA2712161R1: RNCC: 5 | RNVC: 2
MA521022: RNCC: 5 | RNVC: 2

25 Aug 1982

5340-12-382-9372
Retaining Strap

123829372
1175860: RNCC: 3 | RNVC: 2

25 Aug 2010

5340-12-199-8331
Nonmetallic Bumper

121998331
258816: RNCC: 2 | RNVC: 2
258816: RNCC: 3 | RNVC: 2

5 Jun 1984

5340-12-196-0595
Butt Hinge Leaf

121960595
81972010202: RNCC: 3 | RNVC: 2

24 May 1983

5340-12-324-6652
Sealing Plug Assembly

123246652
300130: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-12-339-9252
Spring Tension Clip

123399252
0050012105: RNCC: 3 | RNVC: 2
00 50 012 105: RNCC: 5 | RNVC: 2

1 Feb 1996

5340-12-356-3712
Casement Fastener

123563712
6503.165.11.60.000R.0E: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-324-7019
Spring Tension Clip

123247019
437.247: RNCC: 3 | RNVC: 2

18 Mar 1991

5340-12-316-5977
Access Cover

123165977
6380523: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-373-6341
Nut And Bolt Locking Plate

123736341
8719940030: RNCC: 2 | RNVC: 2
8719940030: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-342-6876
Mounting Plate

123426876
T671M1019206: RNCC: 3 | RNVC: 2

17 Mar 1997

5340-12-350-9494
Dust And Moisture Seal Protective Cap-Plug

123509494
034L0201: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-12-378-2866
Antipilferage Seal

123782866
45599: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-12-350-7029
Mounting Bracket

123507029
10063-540000.10: RNCC: 3 | RNVC: 2
10063-540000.10: RNCC: 5 | RNVC: 9

8 May 2000

5340-12-021-5959

5340-12-366-6501
Angle Bracket

123666501
279.628 907: RNCC: 2 | RNVC: 2
279.628 907: RNCC: 3 | RNVC: 2

19 May 2005

5340-12-176-8296
Loop Clamp

121768296
51974010028: RNCC: 3 | RNVC: 2

20 Dec 1978

5340-12-028-5597

5340-12-332-6288
Retaining Strap

123326288
81254410356: RNCC: 2 | RNVC: 2
81254410356: RNCC: 3 | RNVC: 2
81.25441.0356: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-358-0254
Access Cover

123580254
027253041: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-12-374-4134
Loop Clamp

123744134
5580675: RNCC: 2 | RNVC: 2
5580675: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-12-360-3263
Mounting Plate

123603263
3514411304: RNCC: 3 | RNVC: 2
3514411304: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-367-5900
Mounting Plate

123675900
7801044482AA: RNCC: 3 | RNVC: 2

7 Sep 2005

5340-12-701-3592
Mounting Bracket

127013592
5.12.5111.5720.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-5756
Resilient Mount

123205756
61000/K: RNCC: 3 | RNVC: 2

26 Jan 1990

5340-12-181-9561
Manual Control Handle

121819561
07887-7151: RNCC: 3 | RNVC: 2
VKS4-1-013-2: RNCC: 5 | RNVC: 2

28 Dec 1979

5340-12-180-9031
Elastic Cord Assembly

121809031
P-895332-403: RNCC: 3 | RNVC: 2
P895332-403: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-190-5524
Loop Clamp

121905524
2211428804: RNCC: 3 | RNVC: 2
5801506-7024.005: RNCC: 5 | RNVC: 2
5801506-7024-005: RNCC: 5 | RNVC: 2
22114 28804: RNCC: 5 | RNVC: 9

2 Dec 1981

5340-12-167-3802
Catch Strike

121673802
1400003-11005-02: RNCC: 3 | RNVC: 2
1400003-11005-02: RNCC: 5 | RNVC: 9
1400003-11005.02: RNCC: 5 | RNVC: 9

16 Dec 1976

5340-12-300-7038
Retaining Band

123007038
3144700240: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-379-7939
Loop Clamp

123797939
05551914: RNCC: 3 | RNVC: 2
05551914: RNCC: 5 | RNVC: 2
CV163308: RNCC: 5 | RNVC: 2

2 Sep 2009

5340-12-379-7966
Mounting Bracket

123797966
05557310: RNCC: 3 | RNVC: 2
05557310: RNCC: 5 | RNVC: 2
CV168762: RNCC: 5 | RNVC: 2

2 Sep 2009

5340-12-383-0353
Manual Control Lever

123830353
390470: RNCC: 3 | RNVC: 2

7 Sep 2010

5340-12-378-2111
Mounting Bracket

123782111
41025492: RNCC: 3 | RNVC: 2

19 Mar 2009

Load More Results