What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 78 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 78 of 178

5340-12-371-7894
Mounting Plate

123717894
7003733: RNCC: 3 | RNVC: 2

16 May 2007

5340-12-041-5723

5340-12-352-3996
Angle Bracket

123523996
533-980110.00.0: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-12-351-5939
Mounting Bracket

123515939
3514.990.3: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-12-158-5424
Friction Catch Stud

121585424
0572-11: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-193-9529
Spring Tension Clip

121939529
620D049: RNCC: 3 | RNVC: 2
4606890022: RNCC: 5 | RNVC: 2
721 1 87 079 1: RNCC: 5 | RNVC: 9

20 Sep 1982

5340-12-380-0010
Retaining Bail

123800010
120D182044.002.0: RNCC: 2 | RNVC: 2
120D182044.002.0: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-393-4086
Nut And Bolt Locking Plate

123934086
M5757021120200: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-026-8372

5340-12-020-7327

5340-12-310-0941
Handle Grip

123100941
272.301 843: RNCC: 2 | RNVC: 2
272.301.843: RNCC: 3 | RNVC: 2
272.301 843: RNCC: 5 | RNVC: 9

7 Apr 1987

5340-12-367-7377
Mounting Bracket

123677377
630747246: RNCC: 3 | RNVC: 2

5 Oct 2005

5340-12-377-7425
Clamping Catch

123777425
9830012000: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-12-382-4431
Dust And Moisture Seal Protective Cap-Plug

123824431
T16581: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-12-335-8395
Mounting Plate

123358395
7801035021: RNCC: 3 | RNVC: 2
78010 35021: RNCC: 5 | RNVC: 9

21 Sep 1994

5340-12-303-5886
Electrical-Mechanical Equipment Post

123035886
52.0261.550.02: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-178-9503

5340-12-342-1588
Mounting Bracket

123421588
136L54701: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-327-6767
Nonmetallic Bumper

123276767
5670: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-357-5415
Helical Compression Spring Retainer

123575415
5558457: RNCC: 2 | RNVC: 2
5558457: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-325-3865
Butt Hinge Leaf

123253865
2202 056 00 0: RNCC: 3 | RNVC: 2

31 May 1991

5340-12-323-9383
Lock-Release Lever

123239383
1000025-141500.15: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-382-2532
Mounting Bracket

123822532
S434M1083101: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-184-0420
Retaining Strap

121840420
02587198: RNCC: 3 | RNVC: 2
2587198KZ5505-76: RNCC: 5 | RNVC: 2

19 Jun 1980

5340-12-184-1534
Friction Catch

121841534
247: RNCC: 3 | RNVC: 2

28 Jun 1980

5340-12-318-9654
Lock-Release Lever

123189654
0210601501: RNCC: 3 | RNVC: 2

28 Aug 1989

5340-12-044-0592

5340-12-050-0047

5340-12-043-9438

5340-12-381-8904
Swivel Caster

123818904
25F/300/60: RNCC: 3 | RNVC: 2
25F/300/60: RNCC: 5 | RNVC: 2

14 Apr 2010

5340-12-351-7393
Dust And Moisture Seal Protective Plug

123517393
300201520: RNCC: 3 | RNVC: 2
08001050: RNCC: 5 | RNVC: 2

16 Aug 2000

5340-12-318-2347
Rigid Caster

123182347
510252-8342.000: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-12-318-1074
Mounting Bracket

123181074
6161500673: RNCC: 3 | RNVC: 2

13 Jun 1989

5340-12-321-2496
Mounting Bracket

123212496
536C05702: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-383-5101
Mounting Bracket

123835101
11634: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-12-194-3892
Flush Lock

121943892
291827503: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-004-0051

5340-12-135-6744

5340-12-386-4487
Retaining Bail

123864487
2500262-199600.001.0: RNCC: 2 | RNVC: 2
2500262-199600.001.0: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-12-174-4621
Double Angle Bracket

121744621
23176-189210-04-0: RNCC: 2 | RNVC: 2
23176-189210-04-0: RNCC: 5 | RNVC: 2
23176-189210.04.0: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-386-3730
Mounting Plate

123863730
71134: RNCC: 3 | RNVC: 2
KB71134-760: RNCC: 5 | RNVC: 2

29 Aug 2011

5340-12-362-5455
Dust And Moisture Seal Protective Plug

123625455
V6540-04611-101: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-367-7756
Loop Clamp

123677756
FX08-47-67-C6-W4: RNCC: 3 | RNVC: 2
FX08 47-67 C6-W4: RNCC: 5 | RNVC: 2

12 Oct 2005

5340-12-151-4326
Resilient Mount

121514326
23111-3402.06: RNCC: 2 | RNVC: 2
50003133: RNCC: 3 | RNVC: 2
AI4-31-85A: RNCC: 3 | RNVC: 9
811.000.23111-3402: RNCC: 5 | RNVC: 2
81100-23111-3402.06: RNCC: 5 | RNVC: 2
23111-3402-06: RNCC: 5 | RNVC: 2
23111-3402.06: RNCC: 5 | RNVC: 2
23111-3402.06: RNCC: 5 | RNVC: 9
23111-3402-06: RNCC: 5 | RNVC: 9
23111-3402-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-371-5505
Multiple Angle Bracket

123715505
2300525-970400.005.0: RNCC: 3 | RNVC: 2
1719021: RNCC: 5 | RNVC: 9

17 Apr 2007

5340-12-195-4950
Nonmetallic Bumper

121954950
4210059-70,0 MM LAENGE: RNCC: 3 | RNVC: 2
251449050005: RNCC: 5 | RNVC: 2
251449050005: RNCC: 5 | RNVC: 2

3 Mar 1983

5340-12-300-4926
Plug Button

123004926
3901567900: RNCC: 3 | RNVC: 2
40099500: RNCC: 5 | RNVC: 2
40099500P1: RNCC: 5 | RNVC: 2

7 Aug 1984

5340-12-327-4533
Hand Crank

123274533
1350.6.5.42.00: RNCC: 3 | RNVC: 2

23 Jan 1992

5340-12-329-6574
Manual Control Handle

123296574
5650 192: RNCC: 3 | RNVC: 2
AKS-T3: RNCC: 5 | RNVC: 9

15 Sep 1992

5340-12-347-1200
Mounting Bracket

123471200
463-630610.000: RNCC: 3 | RNVC: 9
9893620: RNCC: 5 | RNVC: 9

29 Oct 1998

5340-12-343-6862
Dust And Moisture Seal Protective Cap

123436862
10087: RNCC: 3 | RNVC: 2

15 Jul 1997

5340-12-346-8749
Rod End Clevis

123468749
240MM 25MM PN11: RNCC: 3 | RNVC: 2
240MM 25MM PN14: RNCC: 5 | RNVC: 9

22 Sep 1998

5340-12-338-8488
Angle Bracket

123388488
463-630736.000: RNCC: 3 | RNVC: 9
9892462: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-338-8548
Double Angle Bracket

123388548
463-611401.000: RNCC: 3 | RNVC: 9
9895614: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-370-8574
Butt Hinge Leaf

123708574
866406702: RNCC: 2 | RNVC: 2
866406702: RNCC: 3 | RNVC: 2

10 Jan 2007

5340-12-374-3514
Dust And Moisture Seal Protective Plug

123743514
0005460786: RNCC: 3 | RNVC: 2
7095776: RNCC: 5 | RNVC: 2

11 Feb 2008

5340-12-163-1535
Dust And Moisture Seal Protective Cap

121631535
3900017529: RNCC: 3 | RNVC: 2
1309613: RNCC: 5 | RNVC: 2
0000180306: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-0270
Bow Handle

121850270
CF3271980X: RNCC: 3 | RNVC: 2
CF 327 198 -X: RNCC: 5 | RNVC: 2
CF3271980X: RNCC: 5 | RNVC: 2
CF 327 198 -X: RNCC: 5 | RNVC: 2

4 Sep 1980

5340-12-181-1876
Loop Clamp

121811876
CF 418 556 A: RNCC: 2 | RNVC: 2
CF 418 556 A: RNCC: 3 | RNVC: 2
CF418556A: RNCC: 5 | RNVC: 2
CF 418 556 A: RNCC: 5 | RNVC: 2
CF418556A: RNCC: 5 | RNVC: 2
CF418556A: RNCC: 5 | RNVC: 2
CF 418 556 A: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-12-410-6098

5340-12-343-2917
Electronic Equipmen Hardware Kit

5340-12-348-1428
Clamping Catch

123481428
17.000.0151.42: RNCC: 3 | RNVC: 2

21 Apr 1999

5340-12-390-7395
Dust And Moisture Seal Protective Cap

123907395
26H780: RNCC: 3 | RNVC: 2
7112843: RNCC: 5 | RNVC: 2

6 Dec 2012

5340-12-357-8912
Mounting Bracket

123578912
2300042-255260.005: RNCC: 2 | RNVC: 2
2300042-255260.005: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-364-2466
Angle Bracket

123642466
4375280140: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-350-5931
Door Button

123505931
52.1431.062.21: RNCC: 2 | RNVC: 2
52.1431.062.21: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-359-2997
Nonmetallic Bumper

123592997
641 752 00 96: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-12-196-2123
Plug Button

121962123
4757100404: RNCC: 3 | RNVC: 2
0691023: RNCC: 5 | RNVC: 2
691023: RNCC: 5 | RNVC: 9

13 Jun 1983

5340-12-350-5937
Access Cover

123505937
54.1038.180.01: RNCC: 2 | RNVC: 2
54.1038.180.01: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-357-6321
Multiple Angle Bracket

123576321
038103941A: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-391-6274
Loop Clamp

123916274
S010139: RNCC: 3 | RNVC: 2
4052063171384: RNCC: 5 | RNVC: 1

22 Mar 2013

5340-12-372-0823
Helical Compression Spring Retainer

123720823
8510797: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-12-195-4095
Handlauf Halter

5340-12-091-2532

5340-12-191-9110
Retaining Band

121919110
4668655: RNCC: 3 | RNVC: 2
466.8655: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-197-0379
Dust And Moisture Seal Protective Plug

121970379
WFGST8: RNCC: 3 | RNVC: 2
WFGST8: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-12-161-8161
Butt Hinge Leaf

121618161
81626900039: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-164-1637

5340-12-324-4484
Loop Clamp

123244484
14.45.130: RNCC: 3 | RNVC: 2

18 Feb 1991

5340-12-316-1538
Door Handle

123161538
3817660001: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-338-2298
Catch Strike

123382298
1054801: RNCC: 3 | RNVC: 2
EZ10548: RNCC: 5 | RNVC: 2

8 Jun 1995

5340-12-359-1333
Mounting Bracket

123591333
DF 307 153 A: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-12-368-9806
Multiple Angle Bracket

123689806
7803221210: RNCC: 3 | RNVC: 2
1030010-721190.000.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-356-4984
Dust And Moisture Seal Protective Plug

123564984
735M12X1,5: RNCC: 3 | RNVC: 2
909735141: RNCC: 5 | RNVC: 2
GPN735-M12X1,5: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-310-2817
Nonmetallic Bumper

123102817
98111101: RNCC: 3 | RNVC: 2
1216 8024: RNCC: 3 | RNVC: 2
12168024: RNCC: 5 | RNVC: 9
6.420.0.861.004.4: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-332-3562
Extension Drawer Slide

123323562
5.043.004.9: RNCC: 3 | RNVC: 2
6575807: RNCC: 5 | RNVC: 2

3 Aug 1993

5340-12-309-4893
Angle Bracket

123094893
4900059-751933.001.0: RNCC: 2 | RNVC: 2
4900059-751933.001.0: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-12-350-5094
Extension Drawer Slide Section

123505094
5.043.402.7: RNCC: 3 | RNVC: 2

6 Apr 2000

5340-12-359-9117
Angle Bracket

123599117
1868-251200.003.0: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-12-302-6147
Headless Straight Rod

123026147
YK03210836: RNCC: 3 | RNVC: 2
03210836: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 21 0836: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-175-5787
Nonmetallic Bumper

121755787
WW306475A: RNCC: 3 | RNVC: 9
WW 306 475 A: RNCC: 5 | RNVC: 2
WW306475A: RNCC: 5 | RNVC: 2
WW 306 475 A: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-385-5002
Access Cover

123855002
5550101235: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-345-0921
Door Button

123450921
1000-13: RNCC: 3 | RNVC: 2
91745966: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-12-351-4155
Dust And Moisture Seal Boot

123514155
T671M70X0206: RNCC: 3 | RNVC: 2

25 Jul 2000

5340-12-386-9418
Double Angle Bracket

123869418
X00019978: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-380-2702
Bumper

123802702
S535M10X6001: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-12-135-7253

5340-12-011-6317

5340-12-164-3054
Nonmetallic Bumper

121643054
4039870414: RNCC: 3 | RNVC: 2
4039870114: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-2359
Platte

121772359
4021592340: RNCC: 3 | RNVC: 2

22 Jan 1979

5340-12-344-2351
Access Cover

123442351
5580902043: RNCC: 3 | RNVC: 2
558 090 20 43: RNCC: 5 | RNVC: 2

6 Oct 1997

5340-12-332-7185
Lock-Release Lever

123327185
81910200672: RNCC: 3 | RNVC: 2
81910200672: RNCC: 5 | RNVC: 2
81.91020.0672: RNCC: 5 | RNVC: 2

10 Sep 1993

5340-12-042-1619

5340-12-377-8350
Angle Bracket

123778350
98426846: RNCC: 3 | RNVC: 2

13 Feb 2009

5340-12-135-7250

5340-12-389-5314
Electronic Equipment Hardware Kit

123895314
01145760: RNCC: 3 | RNVC: 2

18 Jul 2012

5340-12-359-0586
Dust And Moisture Seal Protective Cap

123590586
0015457583: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-091-4887

5340-12-026-1659

5340-12-187-5893
Friction Catch Stud Receptacle

121875893
PAN3869: RNCC: 3 | RNVC: 2

21 Apr 1981

5340-12-094-6994

5340-12-043-3300

5340-12-388-7568
Cushioning Pad Set

123887568
2318700: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-126-5122

5340-12-351-5103
Multiple Angle Bracket

123515103
4616101036: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-316-2909
Hand Crank

123162909
5186816: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-350-5944
Kunst Gleitschiene

123505944
A1Z10283278: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-343-5750
Mounting Bracket

123435750
1190810: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-12-385-6547
Mounting Bracket

123856547
9265811000: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-179-7618
Mending Plate

121797618
81974860314: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-321-8258
Access Door

123218258
9000 8148: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-12-314-1234
Angle Bracket

123141234
6204923441: RNCC: 3 | RNVC: 2
620 492 34 41: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-323-9068
Mending Plate

123239068
54.2544.550.03: RNCC: 2 | RNVC: 2
54.2544.550.03: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-12-042-5036

5340-12-346-9977
Butt Hinge

123469977
351113: RNCC: 3 | RNVC: 2
351113: RNCC: 5 | RNVC: 2

9 Oct 1998

5340-12-027-2062

5340-12-311-2539
Retaining Strap

123112539
14368-655: RNCC: 3 | RNVC: 2
5920050803: RNCC: 5 | RNVC: 2
KB-14368-655: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-195-6964
Double Angle Bracket

121956964
5800043-2200.01: RNCC: 2 | RNVC: 2
5800043-2200-01: RNCC: 3 | RNVC: 2
5800043-2200.01: RNCC: 5 | RNVC: 2
5800043-2200-01: RNCC: 5 | RNVC: 9
5800043-2200.01: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-356-0080
Strap Hinge

123560080
E6-10-501-10: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-333-7273
Pipe Hanger

123337273
2916025178: RNCC: 3 | RNVC: 2
02916025178: RNCC: 5 | RNVC: 2
BRSPGU6025.178/60SK: RNCC: 5 | RNVC: 2
BRSPGU6025.178/60SK-W1: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-12-359-9752
Mounting Bracket

123599752
64059-002: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-157-4454
Mending Plate

121574454
51-2401-450-04: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-316-1590
Loop Clamp

123161590
5565387/1: RNCC: 3 | RNVC: 2

28 Dec 1988

5340-12-361-3843
Shimmy Damper

123613843
759.109: RNCC: 3 | RNVC: 2
62216013: RNCC: 5 | RNVC: 2

22 Sep 2003

5340-12-379-4982
Bumper

123794982
16: RNCC: 3 | RNVC: 2

30 Jul 2009

5340-12-328-2839
Access Cover

123282839
6024.5081.00: RNCC: 3 | RNVC: 2
60245081: RNCC: 5 | RNVC: 2

1 May 1992

5340-12-153-8267
Antipilferage Seal

121538267
VG95560A9: RNCC: 2 | RNVC: 2
751 999: RNCC: 3 | RNVC: 2
600596: RNCC: 5 | RNVC: 2
9VG95560: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-043-8894

5340-12-027-4885

5340-12-334-1629
Webbing Strap

123341629
TK2540-001-A4: RNCC: 2 | RNVC: 2
2500149-300.00: RNCC: 3 | RNVC: 2
2500149-300.00: RNCC: 3 | RNVC: 2
2500149-300.00: RNCC: 3 | RNVC: 2
2500149-300.00: RNCC: 3 | RNVC: 9
54032/PU: RNCC: 5 | RNVC: 2
7101080: RNCC: 5 | RNVC: 2
2500149-300.00: RNCC: 5 | RNVC: 9
2500149-300.00: RNCC: 5 | RNVC: 9
TK-KG34-2540-007: RNCC: 5 | RNVC: 9

5 Apr 1994

5340-12-327-4657
Spring Tension Clip

123274657
957-100000.12.0: RNCC: 3 | RNVC: 2
957-100000-12-0: RNCC: 5 | RNVC: 2

27 Jan 1992

5340-12-140-3377
Snap Hook

121403377
DIN5299-E160BK: RNCC: 2 | RNVC: 2
DIN5299-E160-ROH: RNCC: 3 | RNVC: 2
226-160X13 BLANK: RNCC: 3 | RNVC: 9
E160DIN5299BL: RNCC: 5 | RNVC: 2
E160DIN5299BLANK: RNCC: 5 | RNVC: 2
226-160X13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-5732
Butt Hinge Leaf

121645732
730024-20.6: RNCC: 2 | RNVC: 2
730024-20-6: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-8863
Block Clamp

123798863
389900: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-12-392-5628
Helical Compression Spring Seat

123925628
L219M2805206: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-12-189-9556
Retaining Strap

121899556
3251022008: RNCC: 3 | RNVC: 2
32510 22008: RNCC: 5 | RNVC: 9

29 Oct 1981

5340-12-307-7017
Handle Grip

123077017
RP988976: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-350-2092
Spring Tension Clip

123502092
0009944160: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-011-4756

5340-12-044-4454

5340-12-320-2215
Dust And Moisture Seal Protective Cap

123202215
914.877: RNCC: 3 | RNVC: 2
2300: RNCC: 5 | RNVC: 2
161 29 74 0018: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-314-1235
Angle Bracket

123141235
6205010620: RNCC: 3 | RNVC: 2
620 501 06 20: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-128-0262

5340-12-364-7787
Friction Catch Stud Receptacle

123647787
54.0084.174.01: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-362-6153
Mounting Bracket

123626153
10020828: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-381-2830
Loop Clamp

123812830
RS15: RNCC: 3 | RNVC: 2

28 Jan 2010

5340-12-135-8229

5340-12-300-3497
Dust And Moisture Seal Protective Plug

123003497
3099870544: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-308-9349
Gummi- Riemen

123089349
25150216: RNCC: 3 | RNVC: 2

28 Nov 1986

5340-12-356-1907
Dust And Moisture Seal Protective Plug

123561907
600B790RAL3000: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-171-5153
Angle Bracket

121715153
81974865001: RNCC: 3 | RNVC: 2

20 Oct 1977

5340-12-318-4875
Plug Button

123184875
06800113: RNCC: 3 | RNVC: 9

19 Jul 1989

5340-12-192-3083
Hasp Staple

121923083
3200030: RNCC: 3 | RNVC: 2
3501: RNCC: 3 | RNVC: 2

13 Apr 1982

5340-12-314-0860
Mending Plate

123140860
272.304 965: RNCC: 2 | RNVC: 2
272.304.965: RNCC: 3 | RNVC: 2
272.304 965: RNCC: 5 | RNVC: 9

4 Jun 1988

5340-12-345-7749
Hand Crank

123457749
TA3008P005: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-12-315-3154
Angle Bracket

123153154
1120-80290.03: RNCC: 3 | RNVC: 2

12 Oct 1988

5340-12-323-5962
Mounting Bracket

123235962
2982371123: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-091-2409

5340-12-090-6469

5340-12-011-5865

5340-12-351-1820
Mounting Plate

123511820
2300387-423010.000: RNCC: 2 | RNVC: 2
9906806: RNCC: 3 | RNVC: 2
2300387-423010.000: RNCC: 5 | RNVC: 9
9906806: RNCC: 5 | RNVC: 9

29 Jun 2000

5340-12-314-3853
Mending Plate

123143853
674.2102: RNCC: 2 | RNVC: 2
6742102: RNCC: 3 | RNVC: 2
674.2102: RNCC: 5 | RNVC: 2

1 Jul 1988

5340-12-308-9216
Barrel Bolt

123089216
1295 207 007: RNCC: 3 | RNVC: 2
1295207007: RNCC: 5 | RNVC: 2
0002670048: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-094-8514

5340-12-164-5106

5340-12-164-4574
Retaining Strap

121644574
4635 331 031: RNCC: 3 | RNVC: 2
4635331031: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-8284
Permanent Magnet

123688284
SC3000: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-12-300-1205
Access Cover

123001205
SH9500Z535: RNCC: 3 | RNVC: 2
SH9500Z535: RNCC: 5 | RNVC: 9
SH9500Z535: RNCC: 5 | RNVC: 9

5 Jul 1984

5340-12-170-2497
Retaining Strap

121702497
PAN4231DEEE6822: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-198-4553
Bow Handle

121984553
CF 802 235 AE: RNCC: 3 | RNVC: 2
CF 802 235 AE: RNCC: 3 | RNVC: 2
CF 445 730-R: RNCC: 5 | RNVC: 2
CF 445 730-R: RNCC: 5 | RNVC: 2

30 Jan 1984

5340-12-368-8064
Clamping Catch

123688064
1030014-185400.008.0: RNCC: 2 | RNVC: 2
1030014-185400.008.0: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-12-365-3507
Mounting Bracket

123653507
1837-190049.000.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-345-8773
Access Cover

123458773
6.232.0.950.021.4: RNCC: 3 | RNVC: 9
1216 2435: RNCC: 5 | RNVC: 2

11 May 1998

5340-12-317-3285
Retaining Clip

123173285
0008261784: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-136-5340
Nonmetallic Bumper

121365340
211251245: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-175-8589
Mounting Bracket

121758589
01-1663: RNCC: 3 | RNVC: 2
0009971284: RNCC: 5 | RNVC: 2
0009971284: RNCC: 5 | RNVC: 2

23 Oct 1978

5340-12-022-1496

5340-12-042-1621

5340-12-172-8668
Angle Bracket

121728668
2024: RNCC: 3 | RNVC: 2

27 Feb 1978

5340-12-176-6931
Bridge Clamp

121766931
CF418372BR: RNCC: 3 | RNVC: 2
CF 418 372 BR: RNCC: 5 | RNVC: 2
CF418372BR: RNCC: 5 | RNVC: 2
CF 418 372 BR: RNCC: 5 | RNVC: 2
CF418372BR: RNCC: 5 | RNVC: 2
CF 418 372 BR: RNCC: 5 | RNVC: 2

13 Dec 1978

5340-12-384-3509
Mounting Bracket

123843509
17489: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-12-383-2665
Mounting Plate

123832665
314709: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-335-0157
Angle Bracket

123350157
391664: RNCC: 3 | RNVC: 2
NZ750101: RNCC: 5 | RNVC: 9

12 Jul 1994

5340-12-168-2782
Loop Clamp

121682782
LN9491B11: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-376-1890
Swivel Caster

123761890
3470DPR200P63: RNCC: 3 | RNVC: 2
4031582303513: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-12-320-2280
Nonmetallic Bumper

123202280
100.363: RNCC: 2 | RNVC: 2
100.363: RNCC: 3 | RNVC: 2

20 Dec 1989

5340-12-361-4194
Mechanic Equipment Hardware Kit

123614194
6072601002: RNCC: 3 | RNVC: 2
6072.6010.02: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-12-375-8288
Butt Hinge

123758288
4637200137: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-360-2092
Spacing Threaded Standoff

123602092
XBB17FEC3K05220: RNCC: 3 | RNVC: 2
XBB17FEC3K05220: RNCC: 3 | RNVC: 9

17 Apr 2003

5340-12-359-7819
Mounting Bracket

123597819
T622P3003101: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-370-6083
Mounting Bracket

123706083
2326626: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-12-358-0743
Angle Bracket

123580743
2300388-250500.008: RNCC: 2 | RNVC: 2
2300388-250500.008: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-355-1572
Mounting Bracket

123551572
2930.1307: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-308-5302
Plug Button

123085302
040-4110: RNCC: 3 | RNVC: 2

21 Oct 1986

5340-12-353-8738
Retaining Clip

123538738
4282884A01: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-356-6305
Dust And Moisture Seal Protective Cover

123566305
009-266.419-586: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-364-2474
Mounting Plate

123642474
4256500137: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-357-6102
Access Cover

123576102
CBD45331P04: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-314-3854
Access Cover

123143854
5590060: RNCC: 3 | RNVC: 2
559.0060: RNCC: 5 | RNVC: 2

1 Jul 1988

5340-12-313-5516
Lock-Release Lever

123135516
1989258: RNCC: 3 | RNVC: 2
989258: RNCC: 5 | RNVC: 9
989258: RNCC: 5 | RNVC: 9

15 Apr 1988

5340-12-313-6653
Nonmetallic Bumper

123136653
VG95092B26X15X30X5X12NR60: RNCC: 2 | RNVC: 2
SCHRAUBPUFFER30X26: RNCC: 3 | RNVC: 2
82200-B26X15X30X5X12.NR60: RNCC: 3 | RNVC: 2

23 Apr 1988

5340-12-356-9638
Dust And Moisture Seal Protective Cap

123569638
280ER16: RNCC: 3 | RNVC: 2
GPN280ER16: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-12-044-3495

5340-12-179-2451
Mounting Bracket

121792451
3001101: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-311-6808
Mounting Bracket

123116808
308924: RNCC: 3 | RNVC: 2

6 Oct 1987

5340-12-362-2401
Mounting Plate

123622401
8909990522: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-12-388-2749
Retaining Strap

123882749
BSS31X25X3: RNCC: 3 | RNVC: 2
5307000031: RNCC: 5 | RNVC: 2

7 Mar 2012

5340-12-338-6696
Retaining Band

123386696
0961001: RNCC: 3 | RNVC: 2

14 Aug 1995

5340-12-369-0522
Butt Hinge

123690522
4637000137: RNCC: 3 | RNVC: 2

17 May 2006

5340-12-190-5687
Double Angle Bracket

121905687
1000078-111100.11: RNCC: 2 | RNVC: 2
1000078-111100.11: RNCC: 3 | RNVC: 2
1000078-111100.11: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-359-7280
Expansion Shield

123597280
50352: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-316-7009
Protection Bellows

123167009
0313004040: RNCC: 3 | RNVC: 2
03.130.04.04.0: RNCC: 5 | RNVC: 2

2 Feb 1989

5340-12-364-1126
Snap Hook

123641126
JK100357: RNCC: 3 | RNVC: 2
JK 100357: RNCC: 5 | RNVC: 2

20 Aug 2004

5340-12-356-1372
Nonmetallic Bumper

123561372
2019880511: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-12-128-1609

5340-12-351-7540
Dust And Moisture Seal Protective Cap-Plug

123517540
4252010120: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-332-8109
Mounting Bracket

123328109
160-74339: RNCC: 3 | RNVC: 2
160-74339: RNCC: 5 | RNVC: 9

22 Sep 1993

5340-12-360-4792
Mechanical Stop

123604792
82050124: RNCC: 3 | RNVC: 2
82050124: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-372-0660
Rod End Clevis

123720660
2247050: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-188-9694
Electrical-Mechanical Equipment Post

121889694
9470950: RNCC: 3 | RNVC: 2
095900024000: RNCC: 5 | RNVC: 2
F300 0T 001 2945: RNCC: 6 | RNVC: 9

12 Aug 1981

5340-12-382-0018
Spacing Threaded Standoff

123820018
18H354: RNCC: 3 | RNVC: 2

27 Apr 2010

5340-12-180-4684
Webbing Strap

121804684
4357908496: RNCC: 3 | RNVC: 2
4357907196: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-307-9616
Nonmetallic Bumper

123079616
0063.0393.3: RNCC: 3 | RNVC: 2
PG03933: RNCC: 5 | RNVC: 2

14 Aug 1986

5340-12-334-5971
Nonmetallic Bumper

123345971
T05917: RNCC: 3 | RNVC: 2
T 5917: RNCC: 5 | RNVC: 2
T05917: RNCC: 5 | RNVC: 9

27 May 1994

5340-12-335-7999
Mounting Bracket

123357999
2782-360910.002.0: RNCC: 2 | RNVC: 2
2782-360910.002.0: RNCC: 3 | RNVC: 2

17 Sep 1994

5340-12-352-9879
Access Cover

123529879
F01173: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-389-5631
Spring Holder

123895631
0030177852: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-12-341-0858
Lock Key

123410858
035094: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-12-365-4741
Webbing Strap

123654741
54.1067.434.00: RNCC: 3 | RNVC: 2

7 Jan 2005

5340-12-041-9822

5340-12-156-9571
Dust And Moisture Seal Protective Cap

121569571
014041105800: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-359-7802
Mounting Bracket

123597802
ZG5200G603: RNCC: 3 | RNVC: 2
ZG5200G603: RNCC: 5 | RNVC: 9

10 Mar 2003

5340-12-192-6799
Pad Eye

121926799
4608321914: RNCC: 3 | RNVC: 2
721 1 88 206 1: RNCC: 5 | RNVC: 9

17 May 1982

5340-12-385-6904
Manual Control Handle

123856904
316001373000307: RNCC: 3 | RNVC: 2
8.316.001.013.00.02: RNCC: 5 | RNVC: 2

30 Jun 2011

5340-12-385-6884
Access Cover

123856884
120D050140.002.0: RNCC: 2 | RNVC: 2
120D050140.002.0: RNCC: 3 | RNVC: 2
1319718: RNCC: 5 | RNVC: 2

30 Jun 2011

5340-12-308-5716
Strap Fastener Loop

123085716
4022.3979.3: RNCC: 3 | RNVC: 2

24 Oct 1986

5340-12-302-5512
Rigid Caster

123025512
03140468: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 14 0468: RNCC: 5 | RNVC: 2

11 Jan 1985

5340-12-389-1748
Compression Cup

123891748
B.AKA1.3331.06: RNCC: 2 | RNVC: 2
B.AKA1.3331.06: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-330-4874
Bow Handle

123304874
6600153-982142.000.0: RNCC: 2 | RNVC: 2
6600153-982142.000.0: RNCC: 3 | RNVC: 2

22 Dec 1992

5340-12-319-5043
Double Angle Bracket

123195043
4900059-751315.001.0: RNCC: 3 | RNVC: 2
1229187: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-319-3351
Headless Straight Rod

123193351
03.084.76.35.0: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-371-8762
Mounting Bracket

123718762
1506256: RNCC: 3 | RNVC: 2
548-820200.12.0: RNCC: 5 | RNVC: 2
15004836: RNCC: 5 | RNVC: 2

24 May 2007

5340-12-321-5272
Mounting Bracket

123215272
2782-923000.000.0: RNCC: 2 | RNVC: 2
2782-923000.000.0: RNCC: 3 | RNVC: 2

29 May 1990

5340-12-378-5936
Mounting Bracket

123785936
4000001181: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-12-388-0042
Angle Bracket

123880042
5803688-601000.01: RNCC: 2 | RNVC: 2
7804260101: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-386-9382
Mounting Bracket

123869382
2103981031: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-366-0488
Nonmetallic Bumper

123660488
1583999998: RNCC: 3 | RNVC: 2
6100: RNCC: 5 | RNVC: 2

3 Mar 2005

5340-12-394-4493
Retaining Band

123944493
7192641: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-339-4354
Spring Tension Clip

123394354
474917: RNCC: 3 | RNVC: 9
474917: RNCC: 5 | RNVC: 9

22 Nov 1995

5340-12-324-7132
Spring Loaded Cylinder Fastener

123247132
54.0024.769.00: RNCC: 2 | RNVC: 2
54.0024.769.00: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-325-3201
Ball Socket Seat

123253201
0009918222: RNCC: 3 | RNVC: 2

24 May 1991

5340-12-347-7085
Mounting Bracket

123477085
272.415.267: RNCC: 2 | RNVC: 2
272.415.267: RNCC: 3 | RNVC: 2
272.415 267: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-12-351-6126
Retaining Strap

123516126
JN0242F40: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-12-328-9703
Rod End Clevis

123289703
2653-330830.00: RNCC: 2 | RNVC: 2
2653-330830.00: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-382-6855
Handle Grip

123826855
5200.230.012.000: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-365-7080
Mounting Bracket

123657080
9436950214: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-323-5688
Plain Solid Disk

123235688
441070: RNCC: 2 | RNVC: 2
441070: RNCC: 3 | RNVC: 2
441070: RNCC: 5 | RNVC: 2
441070: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-341-9155
Rod End Clevis

123419155
3228370071: RNCC: 3 | RNVC: 2
823218370071: RNCC: 5 | RNVC: 2

15 Nov 1996

5340-12-359-1506
Mounting Bracket

123591506
ZG5200G125: RNCC: 3 | RNVC: 2
ZG5200G125: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-378-7021
Manual Control Handle

123787021
8699970263: RNCC: 3 | RNVC: 2

5 May 2009

5340-12-197-6400
Helical Compression Spring Seat

121976400
1200096: RNCC: 3 | RNVC: 2
1200096: RNCC: 5 | RNVC: 2

10 Nov 1983

5340-12-391-6587
Locking Shackle

123916587
8902310006: RNCC: 3 | RNVC: 2
2902310042: RNCC: 5 | RNVC: 9

25 Mar 2013

5340-12-311-9427
Access Cover

123119427
43711194-601: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-12-345-0187
Flush Lock

123450187
3896WC-RECHTS: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-12-304-1277
Double Angle Bracket

123041277
20700.3M23: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-374-2777
Helical Compression Spring Seat

123742777
5303498: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-12-357-8151
Double Angle Bracket

123578151
2300042-255510.001: RNCC: 2 | RNVC: 2
9940412: RNCC: 3 | RNVC: 2
2300042-255510.001: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-311-8058
Access Cover

123118058
272.311.363: RNCC: 3 | RNVC: 2
272.311 363: RNCC: 5 | RNVC: 9

19 Oct 1987

5340-12-181-9631
Butt Hinge Leaf

121819631
01TC30612: RNCC: 3 | RNVC: 2

28 Dec 1979

5340-12-199-4137
Retaining Strap

121994137
3093260740: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-328-9215
Flush Lock

123289215
281843710C: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-316-2656
Permanent Magnet

123162656
HT19: RNCC: 3 | RNVC: 2
E11912: RNCC: 5 | RNVC: 2
19X8-38940 GROESZE A: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-12-357-2244
Bow Handle

123572244
2300436-990911.000.0: RNCC: 2 | RNVC: 2
2300436-990911.000.0: RNCC: 3 | RNVC: 2

23 May 2002

5340-12-341-8045
Dust And Moisture Seal Protective Cap

123418045
040 398: RNCC: 3 | RNVC: 2
040398: RNCC: 5 | RNVC: 2
1-994-8-3: RNCC: 5 | RNVC: 2

30 Oct 1996

5340-12-193-2534
Helical Compression Spring Seat

121932534
911 003 494 4: RNCC: 3 | RNVC: 2
9110034944: RNCC: 5 | RNVC: 2
0692603: RNCC: 5 | RNVC: 2
692603: RNCC: 5 | RNVC: 9

5 Jul 1982

5340-12-386-3252
Access Cover

123863252
800466: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-364-2051
Mounting Plate

123642051
4374030842: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-341-8477
Mounting Bracket

123418477
KS1483000: RNCC: 3 | RNVC: 2
KS1483: RNCC: 5 | RNVC: 2

5 Nov 1996

5340-12-197-3331
Nonmetallic Bumper

121973331
63NO16952: RNCC: 3 | RNVC: 2
63N016952: RNCC: 5 | RNVC: 2

13 Oct 1983

5340-12-148-4976

5340-12-382-5452
Shipping And Storage Container Twistlock

123825452
10002437: RNCC: 3 | RNVC: 2

6 Jul 2010

5340-12-380-4821
Buckle

123804821
P20546NM: RNCC: 3 | RNVC: 2

3 Nov 2009

5340-12-366-3327
Mounting Plate

123663327
P-085065-755: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-12-189-6733
Nonmetallic Bumper

121896733
52-59536-4: RNCC: 3 | RNVC: 2

12 Oct 1981

5340-12-318-5725
Access Cover

123185725
4493301: RNCC: 3 | RNVC: 2

28 Jul 1989

5340-12-371-0471
Mechanic Equipment Hardware Kit

123710471
2581-309000: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-12-356-1727
Angle Bracket

123561727
P70158102009: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-357-4834
Access Cover

123574834
N281M3018210: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-12-372-8425
Buckle

123728425
03012: RNCC: 3 | RNVC: 2
TN03012: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-12-355-5387
Bow Handle

123555387
29.08.136: RNCC: 3 | RNVC: 2
29.08.136: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-197-5377
Lock-Release Lever

121975377
4116300479: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-151-9310
Dust And Moisture Seal Protective Cap

121519310
1165829EF8928-60: RNCC: 3 | RNVC: 2
0116 5829: RNCC: 5 | RNVC: 2
B22H711: RNCC: 5 | RNVC: 2
1165829: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-3995
Retaining Strap

123123995
03756900: RNCC: 3 | RNVC: 2
03756900.234: RNCC: 5 | RNVC: 2

28 Dec 1987

5340-12-378-3681
Mounting Bracket

123783681
0000343354: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-171-0853
Detent Plunger

121710853
1253 306 373: RNCC: 3 | RNVC: 2
1253306373: RNCC: 5 | RNVC: 9

7 Sep 1977

5340-12-187-2209
Nonmetallic Bumper

121872209
81960200049: RNCC: 3 | RNVC: 2
5000253894: RNCC: 5 | RNVC: 2
5000253894: RNCC: 5 | RNVC: 9

11 Mar 1981

5340-12-379-6135
Luggage Handle

123796135
513194: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-12-192-2606
Sealing Plug Assembly

121922606
4218260094: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-12-351-8776
Mounting Bracket

123518776
923.891.4: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-12-382-0015
Spring Loaded Cylinder Fastener

123820015
GN612-8-M12X1,5-B-NI: RNCC: 3 | RNVC: 2

27 Apr 2010

5340-12-193-8146
Hinge Torsion Bar

121938146
1091350.02: RNCC: 3 | RNVC: 2

2 Sep 1982

5340-12-361-7050
Mounting Plate

123617050
133M26001/1: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-12-362-1677
Loop Clamp

123621677
00442254: RNCC: 3 | RNVC: 2

19 Jan 2004

5340-12-382-1748
Mounting Bracket

123821748
5232240140: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-325-7421
Sliding Door Hanger

123257421
229-5400: RNCC: 3 | RNVC: 9

4 Jul 1991

5340-12-382-1048
Loop Clamp

123821048
2130211: RNCC: 3 | RNVC: 2

10 May 2010

5340-12-342-1399
Lock-Release Lever

123421399
534M13009: RNCC: 3 | RNVC: 2
534M13009E1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-349-2444
Dust And Moisture Seal Protective Plug

123492444
4279970086: RNCC: 3 | RNVC: 2
4279970086: RNCC: 5 | RNVC: 2

14 Oct 1999

5340-12-349-2704
Mounting Bracket

123492704
A1Z10275570: RNCC: 2 | RNVC: 2
A1Z10275570: RNCC: 3 | RNVC: 2
20352485: RNCC: 5 | RNVC: 2

19 Oct 1999

5340-12-389-1331
Access Cover

123891331
307.90000810: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-308-0250
Dust And Moisture Seal Protective Cap

123080250
105800: RNCC: 3 | RNVC: 2

21 Aug 1986

5340-12-179-5080
Angle Bracket

121795080
CF 305 887 A: RNCC: 3 | RNVC: 2
CF 305 887 A: RNCC: 5 | RNVC: 2
CF 305 887 A: RNCC: 5 | RNVC: 2
CF305887A: RNCC: 5 | RNVC: 9
CF305887A: RNCC: 5 | RNVC: 9
CF305887A: RNCC: 5 | RNVC: 9

4 Jul 1979

5340-12-145-9643
Gurtgewebe- Riemen

5340-12-339-8312
Access Hole Frame

123398312
FAAB006: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-12-180-6638
Access Cover

121806638
0288 9363: RNCC: 3 | RNVC: 2
2889363: RNCC: 5 | RNVC: 2
2889363ED0695-78: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-302-1676
Mending Plate

123021676
4176390: RNCC: 3 | RNVC: 2
S12B.R00.00.00.019: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-314-2914
Verbindungs Platte

5340-12-011-1876

5340-12-362-7346
Mounting Plate

123627346
S533M5003231: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-363-5199
Mounting Bracket

123635199
T212M3002103: RNCC: 2 | RNVC: 2
T212M3002103: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-328-1570
Access Cover

123281570
4609380199: RNCC: 3 | RNVC: 2
7211744651: RNCC: 5 | RNVC: 9

11 Apr 1992

5340-12-386-0262
Mounting Bracket

123860262
5240980730: RNCC: 3 | RNVC: 2

2 Aug 2011

5340-12-343-1926
Dust And Moisture Seal Protective Plug

123431926
13826024: RNCC: 3 | RNVC: 2
93163523: RNCC: 5 | RNVC: 2
9316 3523: RNCC: 5 | RNVC: 2

15 May 1997

5340-12-379-2691
Access Cover

123792691
71012916: RNCC: 2 | RNVC: 2
71012916: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-12-358-2591
Spacing Threaded Standoff

123582591
1056700: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-381-7642
Mounting Plate

123817642
KS6069: RNCC: 3 | RNVC: 2
543357002102: RNCC: 5 | RNVC: 2

29 Mar 2010

5340-12-164-1410

5340-12-190-5855
Halter

121905855
01TC60649T01: RNCC: 3 | RNVC: 2

7 Dec 1981

5340-12-368-6369
Hand Crank

123686369
DHAG003: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-12-305-6271
Loop Clamp

123056271
132M55028: RNCC: 3 | RNVC: 2

28 Nov 1985

5340-12-354-8625
Mending Plate

123548625
903403201: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-170-6989
Webbing Strap

121706989
81626800007: RNCC: 3 | RNVC: 2
5000253202: RNCC: 5 | RNVC: 2
5000253202: RNCC: 5 | RNVC: 9

28 Jul 1977

5340-12-313-2535
Angle Bracket

123132535
200282: RNCC: 3 | RNVC: 2
23K26 0008 03.003: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-373-2414
Dust And Moisture Seal Protective Cap

123732414
200Z8X16RAL3000: RNCC: 3 | RNVC: 2
GPN200Z8X16RAL3000: RNCC: 5 | RNVC: 2

12 Oct 2007

5340-12-177-5930

5340-12-373-2670
Padlock

123732670
704270377: RNCC: 3 | RNVC: 2

16 Oct 2007

5340-12-374-7837
Mechanical Stop

123747837
10118-183100.003.0: RNCC: 2 | RNVC: 2
10118-183100.003.0: RNCC: 3 | RNVC: 2

19 Mar 2008

5340-12-358-6960
Dust And Moisture Seal Protective Cover

123586960
2800-392800.017.0: RNCC: 2 | RNVC: 2
2800-392800.017.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-346-7503
Dust And Moisture Seal Protective Cover

123467503
2300211-991000.010.0: RNCC: 2 | RNVC: 2
2300211-991000.010.0: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-701-3621
Rod End Connector

127013621
5.12.5300.0620.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-2823
Angle Bracket

121772823
1-1-4108: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-354-5404
Hand Crank

123545404
X020.053Z1000: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-310-9661
Metal Runner

123109661
272.315 243: RNCC: 2 | RNVC: 2
272.315.243: RNCC: 3 | RNVC: 2
272.315 243: RNCC: 5 | RNVC: 9

14 Jul 1987

5340-12-302-8655
Expansion Plug

123028655
178.E48.80-64: RNCC: 3 | RNVC: 2

5 Feb 1985

5340-12-195-7103
Sliding Door Track Bracket

121957103
251843423: RNCC: 3 | RNVC: 2

30 Mar 1983

5340-12-331-5392
Metal Grille

123315392
1120-63120: RNCC: 2 | RNVC: 2
1120-63120: RNCC: 3 | RNVC: 2

17 May 1993

5340-12-316-1517
Retaining Strap

123161517
3134920741: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-385-7910
Safety Cable Kit

123857910
L313M2865212: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-12-379-2164
Spacing Threaded Standoff

123792164
51.30.59: RNCC: 3 | RNVC: 2

3 Jul 2009

5340-12-349-7693
Double Angle Bracket

123497693
81252450128: RNCC: 3 | RNVC: 2
81.25245.0128: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-314-5443
Angle Bracket

123145443
4214290550: RNCC: 3 | RNVC: 2
421 429 05 50: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-195-8507
Mending Plate

121958507
6036092: RNCC: 3 | RNVC: 2
603.6092: RNCC: 5 | RNVC: 2

25 Apr 1983

5340-12-378-9967
Retaining Strap

123789967
203453.001: RNCC: 3 | RNVC: 2
203453: RNCC: 5 | RNVC: 2
CV146096: RNCC: 5 | RNVC: 2

10 Jun 2009

5340-12-184-4261
Expansion Shield

121844261
S12: RNCC: 3 | RNVC: 2
50112: RNCC: 5 | RNVC: 2
2501121: RNCC: 5 | RNVC: 9

24 Jul 1980

5340-12-367-9590
Lock Bolt

123679590
109901: RNCC: 3 | RNVC: 2
GSV 7833: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-358-7607
Double Angle Bracket

123587607
280.14.0505: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-131-7475

5340-12-027-9118

5340-12-343-5664
Angle Bracket

123435664
56041300020: RNCC: 3 | RNVC: 2
F300 0T 022 5283: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-366-6432
Access Cover

123666432
10008538: RNCC: 3 | RNVC: 2
535091-8016.000: RNCC: 3 | RNVC: 2

18 May 2005

5340-12-334-8137
Mending Plate

123348137
1000042-195250.03: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-387-9132
Retaining Strap

123879132
7092636: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-359-4668
Elastic Strap

123594668
61212346549: RNCC: 3 | RNVC: 2

7 Feb 2003

5340-12-344-2076
Mounting Plate

123442076
4615200146: RNCC: 3 | RNVC: 2

29 Sep 1997

5340-12-386-0635
Section Block Clamp

123860635
1832891: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-12-391-9131
Pipe Covering Protection Saddle

123919131
10295782: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-12-346-6104
Ball Socket Seat

123466104
2930.1001: RNCC: 3 | RNVC: 2

17 Aug 1998

5340-12-331-5231
Mounting Plate

123315231
2992954: RNCC: 3 | RNVC: 2
299.2954.00: RNCC: 5 | RNVC: 2

17 May 1993

5340-12-362-9777
Mounting Bracket

123629777
2300042-992543.000: RNCC: 2 | RNVC: 2
2300042-992543.000: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-388-0759
Drawer Slide Set

123880759
5000161744: RNCC: 3 | RNVC: 2
CV135688: RNCC: 5 | RNVC: 2
0161744: RNCC: 5 | RNVC: 2
0161744: RNCC: 5 | RNVC: 9

23 Feb 2012

5340-12-317-2019
Strapping Seal

123172019
123: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-392-5570
Dust And Moisture Seal Protective Cover

123925570
DAAG082: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-12-361-9821
Helical Compression Spring Retainer

123619821
9175564: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-304-0930
Dust And Moisture Seal Protective Cap

123040930
20700.2M34: RNCC: 3 | RNVC: 2

11 Jun 1985

5340-12-320-1358
Manual Control Lever

123201358
6540 003: RNCC: 3 | RNVC: 2
1629432: RNCC: 5 | RNVC: 2
1629432: RNCC: 5 | RNVC: 2

11 Dec 1989

5340-12-366-0113
Mounting Bracket

123660113
9414297969: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-333-3229
Retaining Strap

123333229
81669225010: RNCC: 2 | RNVC: 2
81669225010: RNCC: 3 | RNVC: 2
81.66922.5010: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-12-307-1634
Angle Bracket

123071634
272.324 712: RNCC: 2 | RNVC: 2
272.324.712: RNCC: 3 | RNVC: 2
272.324 712: RNCC: 5 | RNVC: 9

15 May 1986

5340-12-147-2144

5340-12-315-1907
Angle Bracket

123151907
6243120041: RNCC: 3 | RNVC: 2
624 312 00 41: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-316-2918
Rod End Clevis

123162918
6380518: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-322-3532
Retaining Strap

123223532
9000 8289: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-355-1334
Mounting Plate

123551334
1092512: RNCC: 3 | RNVC: 2
06380P001008: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-12-359-5832
Mounting Bracket

123595832
9428901646: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-12-364-2458
Angle Bracket

123642458
6254925441: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-347-3195
Dust And Moisture Seal Protective Plug

123473195
700M45X2: RNCC: 3 | RNVC: 2

26 Nov 1998

5340-12-011-5172

5340-12-094-5589

5340-12-389-0573
Hand Crank

123890573
2607200ET: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-346-4217
Double Angle Bracket

123464217
81251400114: RNCC: 3 | RNVC: 2
81.25140.0114: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-374-2978
Loop Clamp

123742978
5324690: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-180-4682
Webbing Strap

121804682
4357908396: RNCC: 3 | RNVC: 2
4357907296: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-145-3099

5340-12-393-5063
Mounting Plate

123935063
4058310014: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-359-7370
Mounting Bracket

123597370
S282M4016101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-356-7067
Multiple Angle Bracket

123567067
64452015: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-176-8036
Einfach Abg Halter

5340-12-393-2309
Access Cover

123932309
5680160205: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-12-043-5115

5340-12-324-7085
Loop Clamp

123247085
00376-01: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-327-1193
Retaining Strap

123271193
190130: RNCC: 3 | RNVC: 2

3 Dec 1991

5340-12-357-1025
Loop Clamp

123571025
EN4114V06WH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-337-8940
Dashpot

123378940
570528977: RNCC: 3 | RNVC: 2
570528977: RNCC: 5 | RNVC: 2

28 Apr 1995

5340-12-303-9028
Control Rod

123039028
3631702: RNCC: 3 | RNVC: 2

17 May 1985

5340-12-375-4540
Angle Bracket

123754540
T15344: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-307-5151
Mounting Bracket

123075151
5577180: RNCC: 3 | RNVC: 2

25 Jun 1986

5340-12-393-2850
Mounting Bracket

123932850
4236 305 001: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-12-198-4371
Catch Strike

121984371
3127250048: RNCC: 3 | RNVC: 2

27 Jan 1984

5340-12-350-1401
Manual Control Lever

123501401
120461: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-12-146-6596
Retaining Strap

121466596
A10WN7855: RNCC: 3 | RNVC: 2
A10WN7855: RNCC: 3 | RNVC: 2
A10WN7855: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-317-7261
Resilient Mount

123177261
033251393: RNCC: 3 | RNVC: 2
068251393: RNCC: 3 | RNVC: 2
033 251 393: RNCC: 5 | RNVC: 2

3 May 1989

5340-12-134-2830

5340-12-352-7138
Access Cover

123527138
64416359: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-335-2464
Resilient Mount

123352464
11329901: RNCC: 3 | RNVC: 2

1 Aug 1994

5340-12-317-6521
Mounting Bracket

123176521
320-992114: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-12-348-6526
Caster Frame

123486526
301704: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-12-130-1149

5340-12-179-2962
Spring Tension Clip

121792962
A11A241202642: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-188-9689
Butt Hinge Leaf

121889689
9103731: RNCC: 3 | RNVC: 2
071874600000: RNCC: 5 | RNVC: 2
F300 0T 001 2778: RNCC: 6 | RNVC: 9

12 Aug 1981

5340-12-181-2638
Angle Bracket

121812638
3140661032: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-12-301-1075
Plug Button

123011075
0295 0699: RNCC: 3 | RNVC: 2
2950699EZ0609-98: RNCC: 5 | RNVC: 2

21 Sep 1984

5340-12-184-5769
Mending Plate

121845769
877225005: RNCC: 3 | RNVC: 2

2 Aug 1980

5340-12-092-3030

5340-12-357-9127
Angle Bracket

123579127
TA3008P008: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-389-3170
Padlock

123893170
465Z/50: RNCC: 3 | RNVC: 2

20 Jun 2012

5340-12-337-6448
Multiple Angle Bracket

123376448
10 0050 043: RNCC: 3 | RNVC: 2
100067043: RNCC: 5 | RNVC: 2
100050043: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-12-315-1746
Vent Plug

123151746
0785559: RNCC: 3 | RNVC: 2
0785559: RNCC: 5 | RNVC: 9

27 Sep 1988

5340-12-365-9940
Dust And Moisture Seal Protective Cap-Plug

123659940
9305461740: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-12-050-1878

5340-12-347-5762
Retaining Strap

123475762
4965.04.00: RNCC: 2 | RNVC: 2
4965.04.00: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-344-3481
Mending Plate

123443481
81429400218: RNCC: 3 | RNVC: 2
81.42940.0218: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-391-4589
Access Cover

123914589
I006359TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-363-5168
Angle Bracket

123635168
ATF4920020: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-183-8129
Dust And Moisture Seal Protective Cap

121838129
181837105: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-314-1245
Mounting Bracket

123141245
6214910641: RNCC: 3 | RNVC: 2
621 491 06 41: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-372-1548
Flush Bolt

123721548
S322I30A1219: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-351-3248
Angle Bracket

123513248
6544310740: RNCC: 3 | RNVC: 2
654 431 07 40: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-12-198-7309
Bridge Clamp

121987309
23111-4654.00: RNCC: 2 | RNVC: 2
23111-4654.00: RNCC: 3 | RNVC: 2
9853407: RNCC: 5 | RNVC: 2
23111-4654.00: RNCC: 5 | RNVC: 9
9853407: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-373-7331
Mounting Bracket

123737331
L214M1067101: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-12-345-8123
Access Cover

123458123
TA3014P006: RNCC: 3 | RNVC: 2

29 Apr 1998

5340-12-185-0289
Electrical-Mechanical Equipment Post

121850289
CF463070: RNCC: 3 | RNVC: 2
CF463070: RNCC: 5 | RNVC: 2
CF 463 070: RNCC: 5 | RNVC: 2
CF 463 070: RNCC: 5 | RNVC: 2

4 Sep 1980

5340-12-334-2239
Mounting Bracket

123342239
66.3567.503.00-A001: RNCC: 3 | RNVC: 2

14 Apr 1994

5340-12-372-8067
Elbow Catch

123728067
X052955.01: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-12-197-5709
Dust And Moisture Seal Protective Cap

121975709
1153230438: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-12-026-1658

5340-12-094-5654

5340-12-372-1646
Angle Bracket

123721646
S252M3402102: RNCC: 2 | RNVC: 2
S252M3402102: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-12-385-4351
Angle Bracket

123854351
5560780541: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-379-3919
Veh Mounting Rail

123793919
516118: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-323-2468
Helical Compression Spring Seat

123232468
6031840031: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-12-326-4374
Spring Tension Clip

123264374
6173210233: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-391-2792
Loop Clamp

123912792
I000301: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-12-361-4324
Mounting Plate

123614324
30477: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-361-6703
Access Cover

123616703
S533M5047210: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-323-1840
Angle Bracket

123231840
42209139: RNCC: 3 | RNVC: 2
42209139EE55-6313: RNCC: 5 | RNVC: 2

30 Oct 1990

5340-12-360-1538
Mounting Bracket

123601538
9425207941: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-364-3830
Webbing Strap

123643830
45.100.014: RNCC: 3 | RNVC: 9

17 Sep 2004

5340-12-364-2496
Ball Socket Seat

123642496
4429915022: RNCC: 3 | RNVC: 2
548180: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-12-358-9389
Threaded Rod End

123589389
DFAK003: RNCC: 3 | RNVC: 2

2 Dec 2002

5340-12-364-4404
Manual Control Handle

123644404
23724006: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-12-357-2767
Self-Locking Insert

123572767
21043556-601: RNCC: 3 | RNVC: 2

29 May 2002

5340-12-365-1191
Nut And Bolt Locking Plate

123651191
4634281840: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-010-4330

5340-12-359-1621
Loop Clamp

123591621
9409950301: RNCC: 3 | RNVC: 2

6 Jan 2003

5340-12-304-5532
Angle Bracket

123045532
2989121033: RNCC: 3 | RNVC: 2
2 989 121 033: RNCC: 5 | RNVC: 2

30 Jul 1985

5340-12-192-5504
Multiple Angle Bracket

121925504
23111-4256.01: RNCC: 2 | RNVC: 2
23111-4256.01: RNCC: 3 | RNVC: 2
1115134: RNCC: 5 | RNVC: 9
23111-4256.01: RNCC: 5 | RNVC: 9
23111-4256.01: RNCC: 5 | RNVC: 9

4 May 1982

5340-12-366-2898
Angle Bracket

123662898
2739014: RNCC: 3 | RNVC: 2

5 Apr 2005

5340-12-357-2577
Dust And Moisture Seal Protective Cap

123572577
000 528 03 05: RNCC: 3 | RNVC: 2
81 072 133: RNCC: 5 | RNVC: 9

27 May 2002

5340-12-365-1794
Spring Tension Clip

123651794
2300397-970380.001.0: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-12-328-9410
Elastic Strap

123289410
6175220540: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-313-9640
Manual Control Handle

123139640
1995746: RNCC: 3 | RNVC: 2
995746: RNCC: 5 | RNVC: 9
995746: RNCC: 5 | RNVC: 9

27 May 1988

5340-12-198-6456
Detent Plunger

121986456
3852620674: RNCC: 3 | RNVC: 2
3852620674: RNCC: 5 | RNVC: 2

15 Feb 1984

5340-12-321-5095
Dust And Moisture Seal Protective Cap

123215095
1300580001: RNCC: 3 | RNVC: 2
63121244094: RNCC: 5 | RNVC: 2

25 May 1990

5340-12-011-0538

5340-12-351-8958
Access Cover

123518958
5L.6097.013.59: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-313-8158
Nonmetallic Bumper

123138158
251843312A: RNCC: 3 | RNVC: 2

7 May 1988

5340-12-091-3384

5340-12-365-6901
Loop Clamp

123656901
9409950201: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-12-196-9891
Mending Plate

121969891
4358117014: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-12-135-7249

5340-12-351-8971
Access Cover

123518971
01213900: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-199-5568
Handwheel

121995568
V7720: RNCC: 3 | RNVC: 2
V7720: RNCC: 5 | RNVC: 9

11 May 1984

5340-12-183-6732
Angle Bracket

121836732
41151-552: RNCC: 3 | RNVC: 9

8 May 1980

5340-12-333-5216
Access Cover

123335216
1503426A01: RNCC: 3 | RNVC: 2

3 Jan 1994

5340-12-315-6906
Access Cover

123156906
1296 313 170: RNCC: 3 | RNVC: 2
0002643911: RNCC: 5 | RNVC: 2
000 264 39 11: RNCC: 5 | RNVC: 2
1296313170: RNCC: 5 | RNVC: 9

19 Nov 1988

5340-12-315-4736
Mounting Bracket

123154736
325047: RNCC: 3 | RNVC: 2

26 Oct 1988

5340-12-314-2089
Mending Plate

123142089
4356167089: RNCC: 3 | RNVC: 2
435 616 70 89: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-12-321-1737
Mounting Plate

123211737
R900139230: RNCC: 3 | RNVC: 2
139230: RNCC: 5 | RNVC: 9

6 Apr 1990

5340-12-357-9116
Lock-Release Lever

123579116
11142902: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-348-4082
Retaining Strap

123484082
0501 316 324: RNCC: 3 | RNVC: 2
0501316324: RNCC: 5 | RNVC: 2

16 Jun 1999

Load More Results