What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 77 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 77 of 178

5340-12-197-8473
Bridge Clamp

121978473
107833: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-12-366-2195
Mounting Bracket

123662195
057055: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-12-343-9244
Runner

123439244
1064296: RNCC: 3 | RNVC: 2

13 Aug 1997

5340-12-340-3135
Metallic Solid Wheel

123403135
BD9105T683: RNCC: 3 | RNVC: 2
BD9105T683: RNCC: 5 | RNVC: 9

23 Mar 1996

5340-12-140-5825

5340-12-387-4366
Clamping Catch

123874366
10015678: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-12-348-6620
Angle Bracket

123486620
2086601: RNCC: 2 | RNVC: 2
2086601: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-360-0042
Mounting Bracket

123600042
9414325140: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-360-9957
Headless Straight Rod

123609957
0853 9350.063: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-158-7593
Dust And Moisture Seal Protective Cap-Plug

121587593
610U26: RNCC: 3 | RNVC: 2
909735140: RNCC: 5 | RNVC: 2
GPN610U26JAUNE: RNCC: 5 | RNVC: 2
GPN610U26: RNCC: 5 | RNVC: 2
GPN610U26: RNCC: 5 | RNVC: 2
GPN610,U26: RNCC: 5 | RNVC: 9
U26GPN610: RNCC: 5 | RNVC: 9
U26: RNCC: 5 | RNVC: 9
610002600: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-8927
Caster Wheel

123578927
W150105: RNCC: 3 | RNVC: 2
150105: RNCC: 5 | RNVC: 2

8 Aug 2002

5340-12-040-1270

5340-12-359-1512
Mounting Bracket

123591512
ZG5200G356: RNCC: 3 | RNVC: 2
ZG5200G356: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-349-1904
Metal Grille

123491904
88521 15477: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-094-6281

5340-12-010-2279

5340-12-302-0852
Dust And Moisture Seal Protective Plug

123020852
3819971286: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-334-0122
Mounting Bracket

123340122
4604750040: RNCC: 3 | RNVC: 2
ZR04750040: RNCC: 5 | RNVC: 2
7013-96: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-12-026-8700

5340-12-353-8344
Spring Loaded Cylinder Fastener

123538344
16001494: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-369-1730
Retaining Strap

123691730
9014760636: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-368-8722
Shimmy Damper

123688722
104959900502: RNCC: 3 | RNVC: 2

3 May 2006

5340-12-334-2228
Access Cover

123342228
54.0072.143.00: RNCC: 3 | RNVC: 2

14 Apr 1994

5340-12-391-9080
Access Cover

123919080
I006476TAN686A: RNCC: 3 | RNVC: 2

17 Apr 2013

5340-12-343-1657
Access Cover

123431657
CF 469 696 AE: RNCC: 2 | RNVC: 2
CF 469 696 AE: RNCC: 3 | RNVC: 2
CF 469 696 AE: RNCC: 5 | RNVC: 2

13 May 1997

5340-12-343-5666
Retaining Strap

123435666
50021001080: RNCC: 3 | RNVC: 2
F300 0T 022 4067: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-168-6427
Spring Tension Clip

121686427
5400005: RNCC: 3 | RNVC: 2

25 Mar 1977

5340-12-352-3678
Dust And Moisture Seal Boot

123523678
AE73351R: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-12-174-6529
Nonmetallic Bumper

121746529
1209870040: RNCC: 3 | RNVC: 2

17 Jul 1978

5340-12-179-3018
Nonmetallic Bumper

121793018
1159870040: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-311-4225
Dust And Moisture Seal Protective Plug

123114225
272.315 957: RNCC: 2 | RNVC: 2
272.315.957: RNCC: 3 | RNVC: 2
272.315 957: RNCC: 5 | RNVC: 9

1 Sep 1987

5340-12-348-0863
Mechanical Stop

123480863
105-072-332-41: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-12-198-9580
Dust And Moisture Seal Protective Cap

121989580
20-660-42: RNCC: 3 | RNVC: 2

15 Mar 1984

5340-12-320-1020
Angle Bracket

123201020
C249-A15-C153: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-136-2575
Clamping Catch

121362575
81658026001: RNCC: 3 | RNVC: 2
90.19351-6449: RNCC: 5 | RNVC: 2
90193516449: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-300-1386
Nonmetallic Bumper

123001386
2300002-181040.001: RNCC: 2 | RNVC: 2
2300002-181040.001: RNCC: 3 | RNVC: 2
2300002-181040-001: RNCC: 5 | RNVC: 9
2300002-181040.001: RNCC: 5 | RNVC: 9

6 Jul 1984

5340-12-390-4169
Butt Hinge

123904169
19660: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-338-6926
Retaining Strap

123386926
4200081-151330.005: RNCC: 2 | RNVC: 2
4200081-151330.005: RNCC: 3 | RNVC: 2
4200081-151330.005: RNCC: 5 | RNVC: 9
9897631: RNCC: 5 | RNVC: 9

16 Aug 1995

5340-12-321-3047
Spring Loaded Cylinder Fastener

123213047
2500067-101131.00: RNCC: 2 | RNVC: 2
2500067-101131.00: RNCC: 3 | RNVC: 2

2 May 1990

5340-12-372-2095
Protection Bellows

123722095
105-62416: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-190-5801
Retaining Strap

121905801
CF 439 235: RNCC: 3 | RNVC: 2
CF 439 235: RNCC: 5 | RNVC: 2
CF439235: RNCC: 5 | RNVC: 2
CF439235: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-375-1705
Double Angle Bracket

123751705
DUAA033: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-12-195-8509
Angle Bracket

121958509
5951204: RNCC: 3 | RNVC: 2
595.1204: RNCC: 5 | RNVC: 2

25 Apr 1983

5340-12-307-6781
Helical Compression Spring Seat

123076781
761218: RNCC: 3 | RNVC: 2
761218: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-344-1921
Mounting Plate

123441921
2300387-250700.002: RNCC: 2 | RNVC: 2
2300387-250700.002: RNCC: 3 | RNVC: 2
2300387-250700.002: RNCC: 5 | RNVC: 9
9907886: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-189-8156
Resilient Mount

121898156
828200201: RNCC: 3 | RNVC: 2
N00A3500010118A: RNCC: 5 | RNVC: 2
N00A3500010118A: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-129-1630

5340-12-315-3172
Loop Clamp

123153172
LN9490A14: RNCC: 2 | RNVC: 2

12 Oct 1988

5340-12-385-9770
Access Hole Frame

123859770
2500262-394285.001.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-378-1410
Section Block Clamp

123781410
2300232-828000.007.0: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-12-318-4915
Nut And Bolt Locking Plate

123184915
1.5130-8: RNCC: 3 | RNVC: 2
1-5130-8: RNCC: 5 | RNVC: 2

19 Jul 1989

5340-12-128-9664

5340-12-350-5924
Access Cover

123505924
160-77739: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-363-0479
Bail Handle

123630479
3286.1203: RNCC: 3 | RNVC: 2
3054226: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-358-6864
Access Cover

123586864
6562800333: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-341-8810
Dust And Moisture Seal Protective Plug

123418810
700M30X1,5: RNCC: 3 | RNVC: 2
GPN700,M30X1,5: RNCC: 5 | RNVC: 2

12 Nov 1996

5340-12-361-4132
Spacing Threaded Standoff

123614132
18H280: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-370-7423
Retaining Strap

123707423
6794900041: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-12-139-6877
Electrical-Mechanical Equipment Post

121396877
AWENTW2663A92: RNCC: 3 | RNVC: 2
AWENTW2663A92: RNCC: 5 | RNVC: 2
AWENTW2663A92: RNCC: 5 | RNVC: 2
AWENTW2663A92: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-314-1471
Angle Bracket

123141471
027070604: RNCC: 3 | RNVC: 2

11 Jun 1988

5340-12-357-2786
Mounting Bracket

123572786
85461450003: RNCC: 3 | RNVC: 2
85.46145.0003: RNCC: 5 | RNVC: 2

29 May 2002

5340-12-392-4914
Strap Hinge Leaf

123924914
T531M5501213: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-12-353-0934
Mounting Plate

123530934
54.0084.191.01: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-12-317-2988
Nonmetallic Bumper

123172988
VG95092B10X5X22X5X10NR65: RNCC: 2 | RNVC: 2
VG95092B10X5X22X5X10NR65: RNCC: 3 | RNVC: 2
3229870640: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-349-1897
Metal Grille

123491897
88521 15483: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-316-8277
Access Cover

123168277
2300279-9722.00: RNCC: 2 | RNVC: 2
2300279-9722.00: RNCC: 3 | RNVC: 2
2300279-9722.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-364-2632
Spring Tension Clip

123642632
0008270134: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-389-9204
Clamping Catch

123899204
2220328709: RNCC: 3 | RNVC: 2

13 Sep 2012

5340-12-028-5725

5340-12-326-3382
Rod End Connector

123263382
14/28: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-090-5374

5340-12-308-3369
Retaining Strap

123083369
105753: RNCC: 3 | RNVC: 2

29 Sep 1986

5340-12-385-0517
Dust And Moisture Seal Protective Cap

123850517
869107001: RNCC: 3 | RNVC: 2

26 Apr 2011

5340-12-348-0282
Flush Lock

123480282
81626806095: RNCC: 3 | RNVC: 2
81.62680.6095: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-12-363-5099
Mounting Plate

123635099
4257511011: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-305-1783

5340-12-308-7834
Access Cover

123087834
165038: RNCC: 2 | RNVC: 2
165038: RNCC: 3 | RNVC: 2

17 Nov 1986

5340-12-303-5606
Resilient Mount

123035606
741679S2BL2: RNCC: 3 | RNVC: 2
57416790206: RNCC: 5 | RNVC: 2
3872400017: RNCC: 5 | RNVC: 2

4 Apr 1985

5340-12-311-9586
Ball Socket Seat

123119586
162616: RNCC: 3 | RNVC: 2
162616: RNCC: 5 | RNVC: 9

5 Nov 1987

5340-12-326-4346
Loop Clamp

123264346
LN9490BM5: RNCC: 2 | RNVC: 2

16 Sep 1991

5340-12-366-0011
Dust And Moisture Seal Protective Cap

123660011
0005459103: RNCC: 3 | RNVC: 2

25 Feb 2005

5340-12-326-7288
Mounting Plate

123267288
1392152-350036.190: RNCC: 3 | RNVC: 2
1392152-350036.190: RNCC: 5 | RNVC: 9

23 Oct 1991

5340-12-317-0499
Mounting Plate

123170499
3123121557: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-316-7195
Access Cover

123167195
2300034-320800: RNCC: 2 | RNVC: 2
2300034-320800: RNCC: 5 | RNVC: 9
2300034-320800: RNCC: 5 | RNVC: 9

7 Feb 1989

5340-12-342-1580
Double Angle Bracket

123421580
536L02050: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-379-5546
Swivel Caster

123795546
167632: RNCC: 3 | RNVC: 2

7 Aug 2009

5340-12-346-7528
Dust And Moisture Seal Protective Cap

123467528
8455.1208: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-199-3281
Electrical-Mechanical Equipment Post

121993281
8351875929: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-197-5471
Elastic Cord Assembly

121975471
98956: RNCC: 3 | RNVC: 2

2 Nov 1983

5340-12-351-5049
Angle Bracket

123515049
4616930812: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-199-1719

5340-12-197-0756
Dust And Moisture Seal Protective Plug

121970756
15N15042: RNCC: 3 | RNVC: 2
15,0N15042: RNCC: 5 | RNVC: 2
915042015000: RNCC: 5 | RNVC: 2

15 Sep 1983

5340-12-371-7937
Mounting Plate

123717937
7003781: RNCC: 3 | RNVC: 2

16 May 2007

5340-12-392-8688
Manual Control Lever

123928688
L521M1820102: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-135-6675

5340-12-194-0434
Butt Hinge Leaf

121940434
4217230051: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-377-2783
Mounting Bracket

123772783
41269686: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-12-345-9296
Nonmetallic Bumper

123459296
6175221440: RNCC: 3 | RNVC: 2

18 May 1998

5340-12-340-0805
Buckle

123400805
P20567: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-320-4760
Electrical-Mechanical Equipment Post

123204760
99363274: RNCC: 3 | RNVC: 2

18 Jan 1990

5340-12-040-6692

5340-12-379-8496
Threaded Rod End

123798496
1536873: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-12-379-0493
Mounting Plate

123790493
S880M9201201: RNCC: 3 | RNVC: 2

18 Jun 2009

5340-12-352-8326
Clamping Catch

123528326
8107601700: RNCC: 3 | RNVC: 2
81076017: RNCC: 5 | RNVC: 2

20 Dec 2000

5340-12-010-4327

5340-12-317-2554
Access Cover

123172554
3212610333: RNCC: 3 | RNVC: 2

21 Mar 1989

5340-12-342-4407
Dust And Moisture Seal Protective Plug

123424407
3A0955435: RNCC: 3 | RNVC: 9

12 Feb 1997

5340-12-182-9755
Mending Plate

121829755
JJ51257: RNCC: 3 | RNVC: 2

11 Mar 1980

5340-12-381-6813
Dust And Moisture Seal Protective Cover

123816813
504094724: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-300-8137
Nonmetallic Bumper

123008137
6013210062: RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-303-6130
Turnbuckle

123036130
950.20.224.34.04: RNCC: 3 | RNVC: 9
87.04.03.00000.0015: RNCC: 5 | RNVC: 2

12 Apr 1985

5340-12-361-4461
Manual Control Lever

123614461
3723204: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-12-187-9462
Mounting Bracket

121879462
5801807-2300: RNCC: 2 | RNVC: 2
5801807-2300: RNCC: 3 | RNVC: 2

20 May 1981

5340-12-191-7419
Pad Eye

121917419
65.7725.010.03: RNCC: 3 | RNVC: 2
65-7725-010-03: RNCC: 5 | RNVC: 2

1 Mar 1982

5340-12-175-1021
Loop Clamp

121751021
009-039-130: RNCC: 3 | RNVC: 2
12791-140000: RNCC: 5 | RNVC: 2
12791-140000: RNCC: 5 | RNVC: 9

23 Aug 1978

5340-12-701-9924
Loop Clamp

127019924
VG95211-ML-127019924: RNCC: 2 | RNVC: 2
155N464-403: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-352-2267
Double Angle Bracket

123522267
5062033240: RNCC: 3 | RNVC: 2
506 203 32 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-383-3554
Dust And Moisture Seal Protective Cap

123833554
K300A2201: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-12-301-7490
Angle Bracket

123017490
2300107-500000.19: RNCC: 2 | RNVC: 2
2300107-500000.19: RNCC: 3 | RNVC: 2
2300107-500000.19: RNCC: 5 | RNVC: 9
2300107-500000.19: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-311-5541
Expansion Plug

123115541
41MMN90: RNCC: 3 | RNVC: 2

17 Sep 1987

5340-12-327-4534
Metallic Bumper

123274534
1350.6.5.58.00: RNCC: 3 | RNVC: 2

23 Jan 1992

5340-12-392-3321
Double Angle Bracket

123923321
4100095-982141.000.0: RNCC: 2 | RNVC: 2
4100095-982141.000.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-379-9376
Dust And Moisture Seal Protective Cap

123799376
80000421-GUMMIKAPPE: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-182-4659
Resilient Mount

121824659
V 402: RNCC: 3 | RNVC: 2
V402: RNCC: 5 | RNVC: 2
WW422025: RNCC: 5 | RNVC: 2

4 Feb 1980

5340-12-308-2394
Double Angle Bracket

123082394
2300109-970110.012.0: RNCC: 1 | RNVC: 2
2300109-970110.012.0: RNCC: 3 | RNVC: 2
2300109-970110.012.0: RNCC: 3 | RNVC: 2
2300109-970110.012.0: RNCC: 5 | RNVC: 2
2300109-970110.012.0: RNCC: 5 | RNVC: 9

18 Sep 1986

5340-12-388-1873
Section Block Clamp

123881873
1030105-206400.006.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-199-0274
Angle Bracket

121990274
2300109-970400.079.0: RNCC: 2 | RNVC: 2
2300109-970400.079.0: RNCC: 3 | RNVC: 2
2300109-970400.079.0: RNCC: 3 | RNVC: 2
2300109-970400.079.0: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-12-307-9357
Butt Hinge

123079357
4027.7202.2: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-328-6777
Retaining Strap

123286777
4-68571: RNCC: 3 | RNVC: 2
268932: RNCC: 5 | RNVC: 2

13 Jun 1992

5340-12-318-8289
Rod End Clevis

123188289
M534261: RNCC: 3 | RNVC: 9
M534261: RNCC: 5 | RNVC: 2

21 Aug 1989

5340-12-310-3850
Mending Plate

123103850
2300227-300000.020: RNCC: 2 | RNVC: 2
2300227-300000.020: RNCC: 3 | RNVC: 2

18 May 1987

5340-12-092-0922

5340-12-354-4114
Double Angle Bracket

123544114
J53230699-001: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-179-8553
Mending Plate

121798553
490126-22100-06: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-336-0650
Helical Compression Spring Seat

123360650
0406 2690: RNCC: 3 | RNVC: 2
4062690EE0178-08: RNCC: 5 | RNVC: 2
406-2690: RNCC: 5 | RNVC: 9

18 Oct 1994

5340-12-703-3429
Retaining Strap

127033429
VG95211-ML-127033429: RNCC: 2 | RNVC: 2
N1119-302: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-161-2128
Retaining Strap

121612128
160-75590-25: RNCC: 3 | RNVC: 2
160-75590-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-193-9260
Electrical-Mechanical Equipment Post

121939260
VG95148A17,2XM8X74-ST: RNCC: 2 | RNVC: 2
VG95148A17,2XM8X74-ST: RNCC: 3 | RNVC: 2
5546882: RNCC: 3 | RNVC: 2

14 Sep 1982

5340-12-344-8772
Catch Strike

123448772
5803514-215120.00: RNCC: 2 | RNVC: 2

6 Jan 1998

5340-12-328-9609
Mending Plate

123289609
C42080-A28-C44: RNCC: 2 | RNVC: 2
C42080-A28-C44: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-308-1893
Loop Clamp

123081893
81953126007: RNCC: 3 | RNVC: 2
038400007018: RNCC: 5 | RNVC: 2
038-0130-014-020: RNCC: 5 | RNVC: 2
038 400 007 018: RNCC: 5 | RNVC: 2
81.95312.6007: RNCC: 5 | RNVC: 2

11 Sep 1986

5340-12-360-2853
Access Cover

123602853
225640520-1: RNCC: 3 | RNVC: 2

5 May 2003

5340-12-197-9109
Angle Bracket

121979109
CF 325 708 B: RNCC: 3 | RNVC: 2
CF 325 708 B: RNCC: 5 | RNVC: 2
CF 325 708: RNCC: 5 | RNVC: 9
CF 325 708 A: RNCC: 5 | RNVC: 9
CF 325 708: RNCC: 5 | RNVC: 9
CF 325 708 A: RNCC: 5 | RNVC: 9

1 Dec 1983

5340-12-326-7885
Mounting Plate

123267885
900-951300.02.0: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-12-701-3593
Mounting Plate

127013593
5.12.5111.5730.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-8215
Mounting Bracket

123498215
34 32 2 325 202: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-305-1154
Angle Bracket

123051154
4900059-982120.003.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-701-3956
Mounting Bracket

127013956
5.12.5311.2570.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-1581
Bridge Clamp

121941581
23111-4331.00: RNCC: 2 | RNVC: 2
23111-4331.00: RNCC: 3 | RNVC: 2
1123984: RNCC: 5 | RNVC: 9
23111-4331-00: RNCC: 5 | RNVC: 9
23111-4331.00: RNCC: 5 | RNVC: 9
23111-4331-00: RNCC: 5 | RNVC: 9
23111-4331.00: RNCC: 5 | RNVC: 9

7 Oct 1982

5340-12-324-9978
Webbing Strap

123249978
79017/026-1300-0400: RNCC: 3 | RNVC: 2
79017/026-1300-400: RNCC: 3 | RNVC: 2
79017/026-1300-0400: RNCC: 5 | RNVC: 9

22 Apr 1991

5340-12-143-6403
Loop Clamp

121436403
ZWSPGU8325.10-15/12: RNCC: 3 | RNVC: 2
0009951544: RNCC: 5 | RNVC: 2
ZWSPGU325-010-015-12: RNCC: 5 | RNVC: 2
1338325000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-700-1858
Nonmetallic Bumper

127001858
51-260712084: RNCC: 2 | RNVC: 2
765-33-SB111: RNCC: 3 | RNVC: 2

31 Oct 1991

5340-12-383-2669
Access Cover

123832669
N09PS-02Z01-V03: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-025-3194

5340-12-128-6450
Rubber Bumper

121286450
3704934: RNCC: 3 | RNVC: 2
583704934: RNCC: 5 | RNVC: 9
583704934: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-380-1739
Mounting Bracket

123801739
S288M3014101: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-12-094-6059

5340-12-320-0762
Angle Bracket

123200762
E0965: RNCC: 3 | RNVC: 2
50269: RNCC: 5 | RNVC: 2

5 Dec 1989

5340-12-135-9851

5340-12-135-6688

5340-12-174-1011

5340-12-356-1485
Mounting Bracket

123561485
4848990214: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-159-8615
Pipe Bracket

121598615
37015-500: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-326-5317
Mending Plate

123265317
5802017-701600.01: RNCC: 2 | RNVC: 2
5802017-701600.01: RNCC: 3 | RNVC: 2

1 Oct 1991

5340-12-360-0007
Mounting Bracket

123600007
9414291040: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-010-8645

5340-12-342-1398
Access Cover

123421398
135D08509: RNCC: 3 | RNVC: 2
135D08509E1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-339-0684
Expansion Shield

123390684
62311: RNCC: 3 | RNVC: 2
HM 5X52S: RNCC: 5 | RNVC: 2
62311: RNCC: 5 | RNVC: 2

5 Oct 1995

5340-12-339-1565
Nonmetallic Bumper

123391565
17 111 178 412: RNCC: 2 | RNVC: 2
17 111 178 412: RNCC: 3 | RNVC: 2
17 111 178 412: RNCC: 5 | RNVC: 2
17 111 178 412: RNCC: 5 | RNVC: 2

19 Oct 1995

5340-12-361-4855
Angle Bracket

123614855
2854630695: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-339-9867
Dust And Moisture Seal Protective Cap

123399867
ABSCHLUSZK.FUER WERFER + EMPFAEN: RNCC: 3 | RNVC: 2

9 Feb 1996

5340-12-197-0532
Mending Plate

121970532
6100.002.4: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-394-3738
Angle Bracket

123943738
10187-188206.002.0: RNCC: 2 | RNVC: 2
10187-188206.002.0: RNCC: 3 | RNVC: 2

26 Nov 2013

5340-12-352-6773
Mortise Bolt

123526773
5400051-972012.00: RNCC: 2 | RNVC: 2
5400051-972012.00: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-346-6921
Webbing Strap

123466921
23111-4615.00: RNCC: 2 | RNVC: 2
23111-4615.00: RNCC: 3 | RNVC: 2
23111-4615.00: RNCC: 5 | RNVC: 9

27 Aug 1998

5340-12-304-2042
Retaining Strap

123042042
23111-2405.25: RNCC: 2 | RNVC: 2
23111-2405.25: RNCC: 3 | RNVC: 2
1091661: RNCC: 5 | RNVC: 9
23111-2405.25: RNCC: 5 | RNVC: 9

25 Jun 1985

5340-12-384-9204
Butt Hinge Leaf

123849204
500396902: RNCC: 3 | RNVC: 2

11 Apr 2011

5340-12-175-1277
Angle Bracket

121751277
4257510112: RNCC: 3 | RNVC: 2
4257510112: RNCC: 5 | RNVC: 2

28 Aug 1978

5340-12-391-4777
Mounting Plate

123914777
I000308: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-356-9285
Dust And Moisture Seal Protective Plug

123569285
735084025000: RNCC: 3 | RNVC: 2
25MTN5084: RNCC: 5 | RNVC: 2

17 Apr 2002

5340-12-374-5532
Spring Tension Clip

123745532
7H0915450: RNCC: 3 | RNVC: 2

26 Feb 2008

5340-12-316-8291
Double Angle Bracket

123168291
2300279-5000.58: RNCC: 2 | RNVC: 2
2300279-5000.58: RNCC: 3 | RNVC: 2
2300279-5000.58: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-337-6541
Magnetic Catch

123376541
631820: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-12-316-1841
Butt Hinge Leaf

123161841
5802261-540000.000: RNCC: 2 | RNVC: 2
5802261-540000.000: RNCC: 3 | RNVC: 2
5802261-540000.000: RNCC: 5 | RNVC: 2
5802261-540000.000: RNCC: 5 | RNVC: 2

29 Dec 1988

5340-12-188-1415
Strap Fastener Loop

121881415
AGS-07-135-00-00-00: RNCC: 3 | RNVC: 2
AGS07-135-00-00-00: RNCC: 5 | RNVC: 2

9 Jun 1981

5340-12-352-6118
Mechanical Stop

123526118
5400049-111810.33: RNCC: 2 | RNVC: 2
8350-0085: RNCC: 3 | RNVC: 2
8350-0085: RNCC: 5 | RNVC: 2
5400049-111810.33: RNCC: 5 | RNVC: 2

30 Nov 2000

5340-12-139-3353
Platte

121393353
C20302-A10-C9: RNCC: 3 | RNVC: 2
C20302A10C9: RNCC: 5 | RNVC: 2
TFS70-06031: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-0102
Mechanic Equipment Hardware Kit

123370102
21100-158: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-12-185-6681
Halter

121856681
42041511KZ5091-29: RNCC: 3 | RNVC: 2
42041511: RNCC: 5 | RNVC: 2

23 Oct 1980

5340-12-329-6313
Cushioning Pad

123296313
R-01620: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-12-185-2894
Bow Handle

121852894
10140-1: RNCC: 3 | RNVC: 2

25 Sep 1980

5340-12-358-6806
Angle Bracket

123586806
2481-392000.010.0: RNCC: 2 | RNVC: 2
2481-392000.010.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-388-2742
Lock-Release Lever

123882742
1690-492160.000.0: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-12-199-1057
Nonmetallic Bumper

121991057
4006.4.006029.4: RNCC: 3 | RNVC: 2
1293036: RNCC: 5 | RNVC: 2
4006.4.006004.4: RNCC: 5 | RNVC: 9
7236764: RNCC: 5 | RNVC: 9
0612219: RNCC: 5 | RNVC: 9

27 Mar 1984

5340-12-390-4056
Mounting Bracket

123904056
2300545-251010.003.0: RNCC: 2 | RNVC: 2
2300545-251010.003.0: RNCC: 3 | RNVC: 2

8 Nov 2012

5340-12-306-0740
Mending Plate

123060740
5801984-982200.004.0: RNCC: 2 | RNVC: 2
5801984-982200.004.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-186-4015
Metal Runner

121864015
CF415197D: RNCC: 3 | RNVC: 2
CF 415 197 D: RNCC: 5 | RNVC: 2
CF415197D: RNCC: 5 | RNVC: 2
CF 415 197 D: RNCC: 5 | RNVC: 2

23 Dec 1980

5340-12-361-7730
Webbing Strap

123617730
2653-971522.000.0: RNCC: 2 | RNVC: 2
2653-971522.000.0: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-386-1818
Angle Bracket

123861818
1.314-201300.01: RNCC: 2 | RNVC: 2
1.314-201300.01: RNCC: 5 | RNVC: 2

15 Aug 2011

5340-12-141-9397
Daempfungs Adapter

5340-12-143-4882
Verbindungs Platte

5340-12-376-0732
Handwheel

123760732
V11157: RNCC: 3 | RNVC: 2

11 Aug 2008

5340-12-386-7896
Dust And Moisture Seal Protective Plug

123867896
05718252: RNCC: 3 | RNVC: 2
01179709: RNCC: 5 | RNVC: 2
CV191636: RNCC: 5 | RNVC: 2
05718252: RNCC: 5 | RNVC: 2

30 Sep 2011

5340-12-379-2975
Shipping And Storage Container Twistlock

123792975
LB5: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-351-5949
Spring Loaded Cylinder Fastener

123515949
GN613-5-A-NI: RNCC: 3 | RNVC: 2
2212.405: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-12-322-5158
Access Cover

123225158
4-163696: RNCC: 3 | RNVC: 2
562934: RNCC: 5 | RNVC: 2

29 Aug 1990

5340-12-372-0526
Electronic Equipment Hardware Kit

123720526
65.7105.526.00-A001: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-172-0636
Butt Hinge Leaf

121720636
1000078-200360: RNCC: 2 | RNVC: 2
1000078-200360: RNCC: 5 | RNVC: 2
1000078-200360: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-375-1302
Expansion Shield

123751302
0903 818 080: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-383-4633
Clamping Catch

123834633
35023: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-12-346-4934
Buckle

123464934
R24997: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-12-184-6256

5340-12-162-5637
Electrical-Mechanical Equipment Post

121625637
K4099: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-185-0495
Loop Clamp

121850495
LN9490BK15: RNCC: 2 | RNVC: 2
LN9490BR15: RNCC: 5 | RNVC: 2

6 Sep 1980

5340-12-184-5217
Manual Control Handle

121845217
015-236: RNCC: 3 | RNVC: 2
513085967: RNCC: 5 | RNVC: 2
3800015-40: RNCC: 5 | RNVC: 9

29 Jul 1980

5340-12-312-1328
Butt Hinge

123121328
81.62690.4024: RNCC: 3 | RNVC: 2
281831401: RNCC: 3 | RNVC: 2
81626904024: RNCC: 5 | RNVC: 2

25 Nov 1987

5340-12-310-7521
Butt Hinge

123107521
DIN31211-N1: RNCC: 2 | RNVC: 2

26 Jun 1987

5340-12-379-3994
Tripod Component

123793994
0203142: RNCC: 3 | RNVC: 2
0203142: RNCC: 5 | RNVC: 2

20 Jul 2009

5340-12-128-6523

5340-12-347-0020
Access Cover

123470020
62.7000.112.01-A001: RNCC: 2 | RNVC: 2
62.7000.112.01-A001: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-392-8895
Angle Bracket

123928895
2321783000: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-345-4394
Mounting Bracket

123454394
54.0053.435.07: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-377-7909
Angle Bracket

123777909
41016387: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-12-173-7966
Resilient Mount

121737966
183411171A: RNCC: 3 | RNVC: 2

16 May 1978

5340-12-367-5452
Mounting Bracket

123675452
H10592: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-178-0434
Nonmetallic Bumper

121780434
4021590484: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-12-194-5195
Bow Handle

121945195
251867161: RNCC: 3 | RNVC: 2
81.62641.0056: RNCC: 5 | RNVC: 2
25186716101C: RNCC: 5 | RNVC: 2

12 Nov 1982

5340-12-358-8895
Multiple Angle Bracket

123588895
4010182840: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-301-0663
Catch Strike

123010663
54.0028.620.04: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-165-6945
Door Button

121656945
3149: RNCC: 3 | RNVC: 2
3149: RNCC: 5 | RNVC: 2

22 Jun 1976

5340-12-352-3680
Dust And Moisture Seal Protective Cap

123523680
427 202 01 22: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-12-351-8824
Block Clamp

123518824
JN0093G26: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-12-154-3868
Angle Bracket

121543868
03216: RNCC: 3 | RNVC: 2
03216: RNCC: 5 | RNVC: 2
03216: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-145-8204
Butt Hinge Leaf

121458204
1196: RNCC: 3 | RNVC: 9
1196: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-5309
Angle Bracket

123265309
060.26.0001: RNCC: 2 | RNVC: 2
060.26.0001: RNCC: 3 | RNVC: 2

1 Oct 1991

5340-12-185-2282
Webbing Strap

121852282
181871585A041: RNCC: 3 | RNVC: 2

23 Sep 1980

5340-12-179-8309
Angle Bracket

121798309
4068810127: RNCC: 3 | RNVC: 2
4068810127: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-377-3909
Quick Release Plunger

123773909
03035-212: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-351-6309
Cushioning Pad

123516309
232-082721: RNCC: 3 | RNVC: 2
10019716: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-12-186-1803
Support Hook

121861803
512205-0026.000: RNCC: 3 | RNVC: 2
512205-0026-000: RNCC: 5 | RNVC: 2
512205-0026: RNCC: 5 | RNVC: 2

5 Dec 1980

5340-12-301-6988
Butt Hinge

123016988
DIN7957-60-ST-BK: RNCC: 2 | RNVC: 2
DIN7957-60-STBK: RNCC: 5 | RNVC: 2
60DIN7957: RNCC: 5 | RNVC: 2

3 Nov 1984

5340-12-301-6504
Hand Carrying Strap Assembly

123016504
4900142-600: RNCC: 2 | RNVC: 2
7872072: RNCC: 3 | RNVC: 2
7872-072: RNCC: 5 | RNVC: 2

30 Oct 1984

5340-12-177-5221
Retaining Strap

121775221
009-030-176-004: RNCC: 3 | RNVC: 2
12790-131000.004: RNCC: 5 | RNVC: 9
12790-131000-004: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-333-7506
Coat And Hat Hook

123337506
2554-AL: RNCC: 3 | RNVC: 2
GSV2554-AL: RNCC: 5 | RNVC: 2
GSV2554: RNCC: 5 | RNVC: 2

1 Feb 1994

5340-12-166-6220
Nonmetallic Bumper

121666220
03440081: RNCC: 3 | RNVC: 2
3440081EE5505-29: RNCC: 5 | RNVC: 2
5505-29-51-04: RNCC: 5 | RNVC: 2
E5505-29-51-04: RNCC: 5 | RNVC: 2

28 Sep 1976

5340-12-190-6982
Headless Grooved Rod

121906982
C22136-A1000-C828: RNCC: 3 | RNVC: 2
C22136A1000C828: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-302-6164
Mending Plate

123026164
YK03160548: RNCC: 3 | RNVC: 2
03160548: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 16 0548: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-311-6713
Loop Clamp

123116713
405.171.8: RNCC: 3 | RNVC: 2
570349777: RNCC: 5 | RNVC: 2

5 Oct 1987

5340-12-345-5844
Mounting Bracket

123455844
54.0053.695.00: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-334-8654
Protection Bellows

123348654
0745091051: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-12-025-8898

5340-12-011-5250

5340-12-022-9433

5340-12-348-2140
Helical Compression Spring Seat

123482140
1315 313 030: RNCC: 3 | RNVC: 2
1315313030: RNCC: 5 | RNVC: 9
0-118106: RNCC: 8 | RNVC: 2

7 May 1999

5340-12-356-1857
Access Cover

123561857
4638350014: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-130-0607
Support Hook

121300607
3460169: RNCC: 3 | RNVC: 2
LH6: RNCC: 3 | RNVC: 2
2051068: RNCC: 3 | RNVC: 2
03048: RNCC: 5 | RNVC: 2
DH6: RNCC: 5 | RNVC: 2
58125-6: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-6104
Nonmetallic Bumper

123576104
CBD45331P09: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-352-4969
Angle Bracket

123524969
521910-970132.000.0: RNCC: 2 | RNVC: 2
521910-970132.000.0: RNCC: 3 | RNVC: 2
1271548: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-314-6413
Retaining Strap

123146413
2300109-260000.007.0: RNCC: 2 | RNVC: 2
2300109-260000.007.0: RNCC: 3 | RNVC: 2
1512627: RNCC: 5 | RNVC: 2

23 Jul 1988

5340-12-320-3824
Helical Compression Spring Seat

123203824
4900059-751530.012.0: RNCC: 3 | RNVC: 2
1227773: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-361-7731
Mounting Bracket

123617731
2653-971530.000.0: RNCC: 2 | RNVC: 2
2653-971530.000.0: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-368-6441
Rim Lock

123686441
237.75.600: RNCC: 3 | RNVC: 2
0.237.75.600: RNCC: 5 | RNVC: 2

3 Apr 2006

5340-12-350-0066
Dust And Moisture Seal Protective Plug

123500066
88960020075: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-365-6582
Handle Grip

123656582
131.018.004.060.FF: RNCC: 3 | RNVC: 2

21 Jan 2005

5340-12-337-2917
Sealing Plug Assembly

123372917
04023600: RNCC: 3 | RNVC: 2
04023600.0874: RNCC: 5 | RNVC: 2

13 Feb 1995

5340-12-365-1590
Angle Bracket

123651590
S932M1025101: RNCC: 2 | RNVC: 2
S932M1025101: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-348-9136
Dust And Moisture Seal Protective Plug

123489136
306219: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-336-5466
Spring Tension Clip

123365466
42860: RNCC: 3 | RNVC: 9

24 Nov 1994

5340-12-365-9942
Mounting Bracket

123659942
9305532340: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-12-393-6445
Section Block Clamp

123936445
06.66012-1306: RNCC: 3 | RNVC: 2
06.66012-1306: RNCC: 5 | RNVC: 2

30 Sep 2013

5340-12-351-7524
Extension Drawer Slide

123517524
8180076: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-363-0522
Retaining Band

123630522
926770077: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-351-5026
Angle Bracket

123515026
4608604714: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-314-2054
Mending Plate

123142054
272.1771.2113: RNCC: 2 | RNVC: 2
272.1771.2113: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-372-8883
Spring Tension Clip

123728883
0005461843: RNCC: 3 | RNVC: 2

3 Sep 2007

5340-12-131-5501

5340-12-304-6226
Manual Control Handle

123046226
DIN99-M100: RNCC: 2 | RNVC: 2
M100DIN99: RNCC: 5 | RNVC: 2

6 Aug 1985

5340-12-185-8268
Expansion Shield

121858268
K54: RNCC: 3 | RNVC: 2
50323: RNCC: 5 | RNVC: 2
2503231: RNCC: 5 | RNVC: 9

1 Nov 1980

5340-12-325-6576
Dust And Moisture Seal Protective Cap

123256576
800M12: RNCC: 3 | RNVC: 2
M10X100GPN800: RNCC: 5 | RNVC: 2
1022574R00: RNCC: 5 | RNVC: 2
GPN800,M12: RNCC: 5 | RNVC: 2

26 Jun 1991

5340-12-383-5038
Dust And Moisture Seal Protective Cap-Plug

123835038
MRS25: RNCC: 3 | RNVC: 2
580003146: RNCC: 5 | RNVC: 2

29 Oct 2010

5340-12-198-8857
Retaining Strap

121988857
8371800940: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-149-2591
Dust And Moisture Seal Protective Cap

121492591
T21A6: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-313-2700
Dust And Moisture Seal Protective Plug

123132700
7973838: RNCC: 3 | RNVC: 2
7973838: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-12-139-3744

5340-12-366-3244
Handle Grip

123663244
987943: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-12-310-8429
Rigid Caster

123108429
8278FOR080P60: RNCC: 3 | RNVC: 2
6502446: RNCC: 5 | RNVC: 2
8278FR080P63: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-12-130-7153

5340-12-356-9441
Retaining Strap

123569441
8819950610: RNCC: 2 | RNVC: 2
8819950610: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-340-1128
Mending Plate

123401128
1206 3722: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-12-364-1959
Cushioning Pad

123641959
GSERD2010.07.05.02: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-333-9477
Mounting Bracket

123339477
3226970315: RNCC: 3 | RNVC: 2

25 Feb 1994

5340-12-344-1815
Dust And Moisture Seal Boot

123441815
33.14670.072000: RNCC: 3 | RNVC: 2

23 Sep 1997

5340-12-368-9340
Halter

123689340
6255002431: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-314-1629
Retaining Strap

123141629
4354210194: RNCC: 3 | RNVC: 2
435 421 01 94: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-309-2601
Angle Bracket

123092601
KM.S01-230000.009: RNCC: 3 | RNVC: 2

7 Jan 1987

5340-12-190-6828
Electrical-Mechanical Equipment Post

121906828
NO PRIMARY REF 12-190-6828: RNCC: 3 | RNVC: 2
7801142190: RNCC: 5 | RNVC: 9
7801 142190: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-327-8359
Mending Plate

123278359
C42080-A34-C57: RNCC: 2 | RNVC: 2
C42080-A34-C57: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-12-177-4101
Mounting Plate

121774101
2300002-122410.003: RNCC: 2 | RNVC: 2
2300002-122410.003: RNCC: 3 | RNVC: 2
2300002-122410-003: RNCC: 5 | RNVC: 9
2300002-122410.003: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-198-4175
Nut And Bolt Locking Plate

121984175
2300002-081100.005: RNCC: 2 | RNVC: 2
2300002-081100.005: RNCC: 3 | RNVC: 2
9850720: RNCC: 5 | RNVC: 2
2300002-081100-005: RNCC: 5 | RNVC: 9
2300002-081100-005: RNCC: 5 | RNVC: 9
2300002-081100.005: RNCC: 5 | RNVC: 9
9850720: RNCC: 5 | RNVC: 9
2300002-081100-005: RNCC: 5 | RNVC: 9
2300002-081100.005: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-339-3726
Protection Bellows

123393726
828900501: RNCC: 3 | RNVC: 2
8289.005-00: RNCC: 5 | RNVC: 2
8289005-00: RNCC: 5 | RNVC: 2

16 Nov 1995

5340-12-702-1799
Angle Bracket

127021799
VG95211-ML-127021799: RNCC: 2 | RNVC: 2
30.7204.1111: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-389-7207
Angle Bracket

123897207
DF 306 395 A: RNCC: 3 | RNVC: 2
DF 306 395 A: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-12-312-9052
Mounting Bracket

123129052
5801984-980210.000.0: RNCC: 2 | RNVC: 2
5801984-980210.000.0: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-332-4112
Mending Plate

123324112
0851 7753.009: RNCC: 3 | RNVC: 2
0851 7564.044: RNCC: 5 | RNVC: 2
8517564FA T.44: RNCC: 5 | RNVC: 9
8517753FA T.9: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-341-9200
Access Cover

123419200
1000173-343000.002.0: RNCC: 2 | RNVC: 2
1000173-343000.002.0: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-12-391-2799
Clamp Bolt Assembly

123912799
I000296: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-12-360-1311
Retaining Band

123601311
9424620142: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-365-3984
Helical Compression Spring Seat

123653984
6110530025: RNCC: 3 | RNVC: 2

28 Dec 2004

5340-12-326-9871
Mending Plate

123269871
279.614 664: RNCC: 3 | RNVC: 2
1300839-200023: RNCC: 5 | RNVC: 9
279.614 664: RNCC: 5 | RNVC: 9

18 Nov 1991

5340-12-142-6788
Band- Scharnier

5340-12-143-5560
Handrad

5340-12-379-6151
Dust And Moisture Seal Protective Cap-Plug

123796151
SBA 12.8550/VR: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-12-368-4597
Nonmetallic Bumper

123684597
300178: RNCC: 3 | RNVC: 2
4-V5671: RNCC: 5 | RNVC: 2

14 Mar 2006

5340-12-374-1795
Casement Fastener

123741795
0.20.0610.0: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-12-377-0699
Multiple Angle Bracket

123770699
1030027-970400.075.0: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-12-356-9844
Loop Clamp

123569844
4055R-930170.000.0: RNCC: 2 | RNVC: 2
4055R-930170.000.0: RNCC: 3 | RNVC: 2

23 Apr 2002

5340-12-347-2831
Webbing Strap

123472831
P08506: RNCC: 3 | RNVC: 2

21 Nov 1998

5340-12-392-3602
Loop Clamp

123923602
I004443: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-141-5311
Blatt- Feder

5340-12-307-9613
Nonmetallic Bumper

123079613
476.080/4: RNCC: 3 | RNVC: 2

14 Aug 1986

5340-12-185-1208
Dust And Moisture Seal Protective Cap

121851208
0730 361 012: RNCC: 3 | RNVC: 2
0730361012: RNCC: 5 | RNVC: 2
0585955: RNCC: 5 | RNVC: 2
02962113: RNCC: 5 | RNVC: 2
585955: RNCC: 5 | RNVC: 9
0730361012: RNCC: 5 | RNVC: 9

11 Sep 1980

5340-12-306-8976
Bridge Clamp

123068976
5900001-9000.03: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-391-6023
Mounting Bracket

123916023
S252M3176105: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-385-7323
Mounting Plate

123857323
5582377135: RNCC: 3 | RNVC: 2

5 Jul 2011

5340-12-338-2312
Nonmetallic Bumper

123382312
217.266.00.03: RNCC: 3 | RNVC: 2
217.266.00.03.00: RNCC: 5 | RNVC: 2
2172660003: RNCC: 5 | RNVC: 2

8 Jun 1995

5340-12-358-1092
Mounting Plate

123581092
201595673: RNCC: 3 | RNVC: 2
079259450: RNCC: 5 | RNVC: 9

16 Sep 2002

5340-12-358-4051
Rod End Connector

123584051
61.9802.269.01-A001: RNCC: 2 | RNVC: 2
61.9802.269.01-A001: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-12-040-0346

5340-12-387-8483
Section Block Clamp

123878483
7093934: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-360-3719
Spring Tension Clip

123603719
0009552604: RNCC: 3 | RNVC: 2
0009552604: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-349-0718
Mounting Bracket

123490718
2300387-660901.000: RNCC: 2 | RNVC: 2
9910991: RNCC: 3 | RNVC: 2
2300387-660901.000: RNCC: 5 | RNVC: 9
9910991: RNCC: 5 | RNVC: 9

21 Sep 1999

5340-12-349-1885
Metal Grille

123491885
9051262713: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-345-9772
Nonmetallic Bumper

123459772
7802726610: RNCC: 3 | RNVC: 2
78027 26610: RNCC: 5 | RNVC: 9

26 May 1998

5340-12-175-0985
Nonmetallic Bumper

121750985
4259870240: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-179-3015
Nonmetallic Bumper

121793015
1109870639: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-350-5928
Flush Lock

123505928
6020274: RNCC: 3 | RNVC: 2
5L.3743.001.59: RNCC: 5 | RNVC: 2

18 Apr 2000

5340-12-162-7995
Retaining Strap

121627995
305G06043: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-136-5208

5340-12-311-8691
Angle Bracket

123118691
2300074-4188.00: RNCC: 2 | RNVC: 2
2300074-4188.00: RNCC: 3 | RNVC: 2
2300074-4188.00: RNCC: 5 | RNVC: 9

26 Oct 1987

5340-12-373-2672
Nonmetallic Bumper

123732672
1269972182: RNCC: 3 | RNVC: 2
126 997 21 82: RNCC: 5 | RNVC: 2

16 Oct 2007

5340-12-320-4320
Bridge Clamp

123204320
SP07680: RNCC: 3 | RNVC: 2
54.4.100.0003: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-321-1216
Access Door

123211216
9000 2057: RNCC: 3 | RNVC: 2

29 Mar 1990

5340-12-365-7361
Angle Bracket

123657361
9438852914: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-12-375-4515
Mounting Bracket

123754515
1520644: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-365-9421
Mounting Bracket

123659421
9305000131: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-12-025-4473

5340-12-322-0135
Mounting Plate

123220135
027032507: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-322-8598
Cremone Bolt

123228598
600B149: RNCC: 3 | RNVC: 2
006405028: RNCC: 5 | RNVC: 2

28 Sep 1990

5340-12-168-1608
Retaining Strap

121681608
WW422044: RNCC: 3 | RNVC: 2
WW422044: RNCC: 5 | RNVC: 2
WW422044: RNCC: 5 | RNVC: 2
WW 422 044: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-326-7847
Nonmetallic Bumper

123267847
4604920682: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-198-7244
Rigid Caster

121987244
8372370088: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-300-2629
Double Angle Bracket

123002629
4900059-751451.000.0: RNCC: 2 | RNVC: 2
4900059-751451.000.0: RNCC: 3 | RNVC: 2
1283216: RNCC: 5 | RNVC: 2
4900059-751451-000-0: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-314-0539
Electrical-Mechanical Equipment Post

123140539
2300223-201100.19.0: RNCC: 2 | RNVC: 2
2300223-201100.19.0: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-12-191-0338
Mending Plate

121910338
B32039: RNCC: 3 | RNVC: 2
3-19157-00: RNCC: 5 | RNVC: 2
113127111A: RNCC: 5 | RNVC: 2

7 Jan 1982

5340-12-156-7014
Turnbuckle Body

121567014
33D0311-0014: RNCC: 3 | RNVC: 2
33D0311-0014: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-7025
Quick Release Plunger

123227025
GN614-4-NI: RNCC: 3 | RNVC: 2
2208.004: RNCC: 3 | RNVC: 2
03070-4: RNCC: 3 | RNVC: 2
RBN410.4-4: RNCC: 3 | RNVC: 2
NLM307-4: RNCC: 5 | RNVC: 9
NLM3070-4: RNCC: 5 | RNVC: 9

13 Sep 1990

5340-12-189-0558
Detent Plunger

121890558
5801433-022220.02.0: RNCC: 3 | RNVC: 2
5801433-022220-02-0: RNCC: 5 | RNVC: 2
5801433-022220.02.0: RNCC: 5 | RNVC: 9
5801433-022220-02-0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-345-9020
Spring Tension Clip

123459020
81619410234: RNCC: 3 | RNVC: 2
25 0101 Z: RNCC: 5 | RNVC: 2
81.61941-0234: RNCC: 5 | RNVC: 2

14 May 1998

5340-12-308-5189
Mending Plate

123085189
SWN14-0341-09: RNCC: 3 | RNVC: 2

20 Oct 1986

5340-12-391-9043
Access Cover

123919043
DF 106 162 AR: RNCC: 3 | RNVC: 2
DF 106 162 AR: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-12-391-7459
Access Cover

123917459
9498350356: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-12-164-5806
Loop Clamp

121645806
689724496: RNCC: 3 | RNVC: 2
24496: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-379-9414
Angle Bracket

123799414
120D280000.002.0: RNCC: 2 | RNVC: 2
120D280000.002.0: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-388-6083
Webbing Strap

123886083
122W163805.000.0: RNCC: 2 | RNVC: 2
122W163805.000.0: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-308-6166
Double Angle Bracket

123086166
0061.1450.4: RNCC: 3 | RNVC: 2

29 Oct 1986

5340-12-318-7079
Access Door

123187079
3-89020: RNCC: 3 | RNVC: 2
123569: RNCC: 5 | RNVC: 2

9 Aug 1989

5340-12-388-1841
Access Cover

123881841
1030105-182096.000.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-358-4268
Loop Clamp

123584268
4000A-800000.002.0: RNCC: 2 | RNVC: 2
4000A-800000.002.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-301-0309
Mending Plate

123010309
1501-324.07(5): RNCC: 3 | RNVC: 2

19 Sep 1984

5340-12-154-9539
Clamping Catch

121549539
KAF20331: RNCC: 3 | RNVC: 2
0480017: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-2390
Retaining Strap

123202390
351271327740: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-12-360-8345
Nonmetallic Bumper

123608345
78350 11173: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-360-0063
Mounting Bracket

123600063
9415404673: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-324-6574
Angle Bracket

123246574
54.0024.765.05: RNCC: 2 | RNVC: 2
54.0024.765.05: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-12-027-7860

5340-12-094-0985

5340-12-092-0892

5340-12-179-8224
Angle Bracket

121798224
81974860361: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-328-8930
Mounting Plate

123288930
2300232-820690.000.0: RNCC: 2 | RNVC: 2
2300232-820690.000.0: RNCC: 3 | RNVC: 2

30 Jun 1992

5340-12-328-8766
Mounting Bracket

123288766
2300232-820630.000.0: RNCC: 2 | RNVC: 2
2300232-820630.000.0: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-390-0593
Pipe Bracket

123900593
DIN65367A-F: RNCC: 2 | RNVC: 2

28 Sep 2012

5340-12-304-6011
Dust And Moisture Seal Protective Cap

123046011
84646.5: RNCC: 3 | RNVC: 2

2 Aug 1985

5340-12-343-7935
Multiple Angle Bracket

123437935
ESAC011: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-12-385-3018
Mending Plate

123853018
5842030041: RNCC: 3 | RNVC: 2

19 May 2011

5340-12-386-1109
Frame Se Connector

123861109
2481-396511.001.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-198-0819
Dust And Moisture Seal Protective Cap

121980819
431271223771: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-12-382-9843
Mounting Plate

123829843
9014921741: RNCC: 3 | RNVC: 2

31 Aug 2010

5340-12-338-2405
Angle Bracket

123382405
0484401: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-12-369-4341
Mounting Bracket

123694341
5832300640: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-12-010-9591

5340-12-022-7088

5340-12-391-6271
Loop Clamp

123916271
I001677TAN686A: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-357-3762
Manual Control Lever

123573762
0005835045: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-12-360-1534
Angle Bracket

123601534
9425061440: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-091-7261

5340-12-321-7830
Mounting Plate

123217830
54.2322.719.02: RNCC: 2 | RNVC: 2
54.2322.719.02: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-12-050-0641

5340-12-368-6979

5340-12-042-1766

5340-12-380-6859
Mounting Bracket

123806859
05.01255.00: RNCC: 3 | RNVC: 2

19 Nov 2009

5340-12-090-5235

5340-12-190-5988
Lock-Release Lever

121905988
02458339: RNCC: 3 | RNVC: 2
2458339KZ5035-55: RNCC: 5 | RNVC: 2
2458339: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-361-4623
Angle Bracket

123614623
61404-655: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-390-4143
Protection Bellows

123904143
0313008130: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-344-0402
Support Hook

123440402
2996.10.56: RNCC: 3 | RNVC: 2
2996.1056: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-360-9024
Mounting Plate

123609024
110591: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-362-9706
Dust And Moisture Seal Protective Cap

123629706
072937: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-394-3823
Mounting Bracket

123943823
11.28044-1136: RNCC: 3 | RNVC: 2
11.28044-1136: RNCC: 5 | RNVC: 2

27 Nov 2013

5340-12-367-8451
Angle Bracket

123678451
2300421-251400.006: RNCC: 2 | RNVC: 2
2300421-251400.006: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-12-366-6375
Strap Fastener Loop

123666375
16007118: RNCC: 3 | RNVC: 2

18 May 2005

5340-12-314-4324
Angle Bracket

123144324
3914290140: RNCC: 3 | RNVC: 2
391 429 01 40: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-358-2576
Dust And Moisture Seal Protective Cap

123582576
41332: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-177-2820
Mounting Bracket

121772820
1-1-4106: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-359-7211
Mounting Plate

123597211
2500261-970130.001.0: RNCC: 2 | RNVC: 2
2500261-970130.001.0: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-316-8995
Lock-Release Lever

123168995
22014.0.03.240.00: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-354-1559
Angle Bracket

123541559
506 074 00 40: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-021-7904

5340-12-345-4384
Mounting Plate

123454384
54.0053.407.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-344-4713
Resilient Mount

123444713
6452400518: RNCC: 3 | RNVC: 2

30 Oct 1997

5340-12-042-2836

5340-12-701-5867
Rod End Connector

127015867
VG95211-ML-127015867: RNCC: 2 | RNVC: 2
5.12.6500.0480.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-2734
Spring Tension Clip

123312734
1600883-0.15: RNCC: 2 | RNVC: 2
1600883-0.15: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-12-175-1187
Loop Clamp

121751187
1-28228: RNCC: 3 | RNVC: 2
42483236: RNCC: 5 | RNVC: 2
42483236EY5077-28: RNCC: 5 | RNVC: 2
4A69320: RNCC: 5 | RNVC: 2

28 Aug 1978

5340-12-155-3353
Retaining Strap

121553353
160-33200-04: RNCC: 3 | RNVC: 2
160-33200-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-343-4677
Mounting Bracket

123434677
5002-104: RNCC: 3 | RNVC: 2
F300 0T 022 4036: RNCC: 6 | RNVC: 9

24 Jun 1997

5340-12-191-7987
Rod End Clevis

121917987
DIN71752-G6X24A3PMITES-BOLZENA3P: RNCC: 2 | RNVC: 2
DIN71752-G6X24A3PMITES-BOLZENA3P: RNCC: 3 | RNVC: 2
AFKB100200068002/024: RNCC: 3 | RNVC: 2
DIN71752-G6X24A3PMITES-BOLZENA3P: RNCC: 3 | RNVC: 2
17411022: RNCC: 3 | RNVC: 2
1002006024.023AND1001006802.023: RNCC: 3 | RNVC: 2
DIN71752-G6X24-FKB6X24 GELBVERZ.: RNCC: 5 | RNVC: 2
G6X24 MIT FKB6X24VERZINKT: RNCC: 5 | RNVC: 2

5 Mar 1982

5340-12-173-3100
Double Angle Bracket

121733100
C44106A7C110: RNCC: 3 | RNVC: 2
C44106-A7-C110: RNCC: 5 | RNVC: 2

5 Apr 1978

5340-12-331-6705
Handle Grip

123316705
409035529: RNCC: 3 | RNVC: 2
409.035.529: RNCC: 5 | RNVC: 2
5L.6097.013.26: RNCC: 5 | RNVC: 2
5L.6097.013.26: RNCC: 5 | RNVC: 2
409-035 529: RNCC: 5 | RNVC: 9
409-035529: RNCC: 5 | RNVC: 9
409.035 529: RNCC: 5 | RNVC: 9

7 Jun 1993

5340-12-391-5228
Mounting Bracket

123915228
I006461: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-12-393-6670
Mounting Bracket

123936670
4100098-982807.000.0: RNCC: 2 | RNVC: 2
4100098-982807.000.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-168-5470
Helical Compression Spring Retainer

121685470
WW 304 865 G: RNCC: 2 | RNVC: 2
WW 304 865 G: RNCC: 3 | RNVC: 9
WW 304 865 G: RNCC: 5 | RNVC: 2
WW304865F: RNCC: 5 | RNVC: 2
WW304865F: RNCC: 5 | RNVC: 2
WW 304 865 F: RNCC: 5 | RNVC: 2
WW 304 865 F: RNCC: 5 | RNVC: 9
WW304865F: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-344-1625
Clamping Catch

123441625
706706: RNCC: 3 | RNVC: 9
706706: RNCC: 3 | RNVC: 9

22 Sep 1997

5340-12-377-4296
Retaining Clip

123774296
10026848: RNCC: 3 | RNVC: 2
10026848: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-12-302-9544
Mending Plate

123029544
70571: RNCC: 3 | RNVC: 2

12 Feb 1985

5340-12-300-2752
Angle Bracket

123002752
27 0336 035: RNCC: 2 | RNVC: 2
9851073: RNCC: 3 | RNVC: 2
27 0336 035: RNCC: 5 | RNVC: 9
9851073: RNCC: 5 | RNVC: 9

20 Jul 1984

5340-12-169-3707
Dust And Moisture Seal Protective Plug

121693707
0003-3622-750: RNCC: 3 | RNVC: 2
0003-3622-750: RNCC: 5 | RNVC: 9

10 May 1977

5340-12-339-1701
Nonmetallic Bumper

123391701
10.41.093.00: RNCC: 3 | RNVC: 2
109109300: RNCC: 5 | RNVC: 2
0008660593: RNCC: 5 | RNVC: 2

20 Oct 1995

5340-12-302-7923
Mending Plate

123027923
178.E44.80A: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-176-3630
Retaining Strap

121763630
181867631: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-180-4503
Expansion Plug

121804503
4355010035: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-192-7842
Electrical-Mechanical Equipment Post

121927842
0872552: RNCC: 3 | RNVC: 2
087.2552: RNCC: 5 | RNVC: 2

24 May 1982

5340-12-337-4082
Loop Clamp

123374082
4202211B01: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-12-174-2357
Spring Tension Clip

121742357
2424690003: RNCC: 3 | RNVC: 2
23310150011: RNCC: 5 | RNVC: 2
0130 6696: RNCC: 5 | RNVC: 2
1306696EY0148-17: RNCC: 5 | RNVC: 2
1306696: RNCC: 5 | RNVC: 9

15 Jun 1978

5340-12-378-4292
Clamping Catch

123784292
65000461: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-193-1419
Electrical-Mechanical Equipment Post

121931419
21 010 01 201: RNCC: 3 | RNVC: 2
2101001201: RNCC: 5 | RNVC: 2
8690940160: RNCC: 5 | RNVC: 2

24 Jun 1982

5340-12-365-0621
Helical Compression Spring Seat

123650621
6060531025: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-314-0237
Strap Fastener Loop

123140237
03399033: RNCC: 3 | RNVC: 9

31 May 1988

5340-12-392-2063
Access Cover

123922063
DF 106 177 AR: RNCC: 3 | RNVC: 2
DF 106 177 AR: RNCC: 5 | RNVC: 2

15 May 2013

5340-12-392-0255
Handle Grip

123920255
EK 138: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-12-176-3633
Retaining Strap

121763633
321881240: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-375-8354
Mounting Bracket

123758354
056624: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-332-6757
Angle Bracket

123326757
81429020169: RNCC: 2 | RNVC: 2
81429020169: RNCC: 3 | RNVC: 2
81.42902.0169: RNCC: 5 | RNVC: 2

3 Sep 1993

5340-12-306-2947
Compression Cup

123062947
1480284017: RNCC: 3 | RNVC: 2

17 Feb 1986

5340-12-321-0105
Retaining Band

123210105
42073193: RNCC: 3 | RNVC: 2

16 Mar 1990

5340-12-040-1361

5340-12-331-4538
Retaining Strap

123314538
U3317: RNCC: 3 | RNVC: 2
U03317: RNCC: 5 | RNVC: 2
U03317: RNCC: 5 | RNVC: 9
U3317: RNCC: 5 | RNVC: 9

6 May 1993

5340-12-331-1387
Loop Clamp

123311387
LN9491BK3: RNCC: 2 | RNVC: 2

24 Mar 1993

5340-12-355-6439
Nonmetallic Bumper

123556439
4618200212: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-324-6662
Access Cover

123246662
54.3050.108.00: RNCC: 2 | RNVC: 2
54.3050.108.00: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-12-310-4728
Helical Compression Spring Seat

123104728
2420328002: RNCC: 3 | RNVC: 2

25 May 1987

5340-12-350-2869
Section Block Clamp

123502869
JN0413D20: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-352-7140
Access Cover

123527140
64416362: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-377-3652
Mounting Bracket

123773652
41229871: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-022-7101

5340-12-379-9108
Block Clamp

123799108
58080101: RNCC: 3 | RNVC: 2
CV169107: RNCC: 5 | RNVC: 2
58080101: RNCC: 5 | RNVC: 2

11 Sep 2009

5340-12-367-3065
Mounting Plate

123673065
81907500322: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-12-302-1417
Nonmetallic Solid Wheel

123021417
504137: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-344-3170
Mending Plate

123443170
111G10015: RNCC: 3 | RNVC: 2
111 G10 015 E1: RNCC: 5 | RNVC: 2

15 Oct 1997

5340-12-332-7262
Plug Button

123327262
5538252: RNCC: 3 | RNVC: 2
553 8252: RNCC: 5 | RNVC: 2

10 Sep 1993

5340-12-091-0889

5340-12-127-2421

5340-12-387-3543
Casement Fastener

123873543
233559: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-360-8342
Dust And Moisture Seal Protective Plug

123608342
78350 11190: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-369-2232
Runner

123692232
200 208: RNCC: 3 | RNVC: 2
FS16P: RNCC: 5 | RNVC: 2

7 Jun 2006

5340-12-042-5818

5340-12-199-1778
Resilient Mount

121991778
281407179: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-192-3096

5340-12-702-9375
Dust And Moisture Seal Protective Cap

127029375
VG95211-ML-127029375: RNCC: 2 | RNVC: 2
2446A: RNCC: 3 | RNVC: 2
0500822967039: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-388-7689
Angle Bracket

123887689
601244-201215.01: RNCC: 2 | RNVC: 2
601244-201215.01: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-361-6811
Mounting Bracket

123616811
300.038.625: RNCC: 2 | RNVC: 2
300.038.625: RNCC: 3 | RNVC: 2
012619-340-14: RNCC: 5 | RNVC: 9

3 Nov 2003

5340-12-702-2487
Mounting Plate

127022487
VG95211-ML-127022487: RNCC: 2 | RNVC: 2
30.8700.01.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-196-1303
Nonmetallic Solid Wheel

121961303
SPEZ1: RNCC: 3 | RNVC: 2
SPEZ1: RNCC: 5 | RNVC: 2

1 Jun 1983

5340-12-365-0618
Helical Compression Spring Seat

123650618
6060530825: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-352-6771
Angle Bracket

123526771
5400051-972100.01: RNCC: 2 | RNVC: 2
5400051-972100.01: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-335-2281
Mounting Bracket

123352281
333007-9011.000: RNCC: 3 | RNVC: 2
333007-9011.000: RNCC: 5 | RNVC: 9

28 Jul 1994

5340-12-343-7108
Mounting Bracket

123437108
3024087: RNCC: 3 | RNVC: 2
3024.087: RNCC: 5 | RNVC: 2

17 Jul 1997

5340-12-375-6801
Loop Clamp

123756801
126830: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-300-8429
Expansion Plug

123008429
3529970320: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-333-5718
Mounting Bracket

123335718
42077869: RNCC: 3 | RNVC: 2
42077869: RNCC: 5 | RNVC: 2

6 Jan 1994

5340-12-121-9509

5340-12-309-8189
Dust And Moisture Seal Protective Cap

123098189
320-997001-08: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-334-9440
Nut And Bolt Locking Plate

123349440
8499940060: RNCC: 3 | RNVC: 2
849 994 00 60: RNCC: 5 | RNVC: 2
849-994-0060: RNCC: 5 | RNVC: 9

5 Jul 1994

5340-12-381-4861
Padlock

123814861
85/40IB: RNCC: 3 | RNVC: 2

22 Feb 2010

5340-12-183-2228
Helical Compression Spring Seat

121832228
7019003300210: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-359-1511
Mounting Bracket

123591511
ZG5200G355: RNCC: 3 | RNVC: 2
ZG5200G355: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-184-1559
Spring Tension Clip

121841559
3819880378: RNCC: 3 | RNVC: 2

28 Jun 1980

Load More Results