What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 75 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 75 of 178

5340-12-180-3120
Catch Strike

121803120
02605067: RNCC: 3 | RNVC: 2
2605067EE5505-34: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-182-1342
Mounting Bracket

121821342
2300033-430130: RNCC: 2 | RNVC: 2
2300033-430130: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-390-0496
Section Block Clamp

123900496
312337: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-191-3824
Retaining Strap

121913824
3605: RNCC: 3 | RNVC: 2
6931 137905: RNCC: 5 | RNVC: 9
6931137905: RNCC: 5 | RNVC: 9

28 Jan 1982

5340-12-313-5517
Double Angle Bracket

123135517
5802017-708800.01: RNCC: 2 | RNVC: 2
5802017-708800.01: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-164-5656

5340-12-027-1043

5340-12-700-2066
Handle Grip

127002066
51-260972054: RNCC: 2 | RNVC: 2
765-49-23: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-326-3810
Access Door

123263810
2160-8851-010: RNCC: 3 | RNVC: 2
2160-8851-01: RNCC: 5 | RNVC: 2
2160-8851-01: RNCC: 5 | RNVC: 9
2160-8851-010: RNCC: 5 | RNVC: 9

9 Sep 1991

5340-12-363-6908
Ball Socket Seat

123636908
0202-001-411: RNCC: 3 | RNVC: 2

15 Jul 2004

5340-12-312-4690
Mounting Bracket

123124690
851387-00: RNCC: 3 | RNVC: 2
851387-00: RNCC: 5 | RNVC: 9

11 Jan 1988

5340-12-325-1071
Mechanic Equipment Hardware Kit

123251071
64414928: RNCC: 3 | RNVC: 2
4414/928: RNCC: 5 | RNVC: 9

3 May 1991

5340-12-306-1342
Electrical-Mechanical Equipment Post

123061342
47083-001: RNCC: 3 | RNVC: 2
47 083-001: RNCC: 5 | RNVC: 9

30 Jan 1986

5340-12-361-7630
Retaining Bail

123617630
5981-181700.021.0: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-196-9533
Double Angle Bracket

121969533
A-295057-005: RNCC: 3 | RNVC: 2
A295057-005: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-359-6771
Nonmetallic Bumper

123596771
2500261-180000.221.0: RNCC: 2 | RNVC: 2
2500261-180000.221.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-327-4672
Metallic Bumper

123274672
2106-110000.05B: RNCC: 2 | RNVC: 2
2106-110000.05B: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-12-307-3323
Dust And Moisture Seal Protective Cap

123073323
009-078.911-001: RNCC: 3 | RNVC: 2
009-078.911-001: RNCC: 5 | RNVC: 9

5 Jun 1986

5340-12-349-8061
Dust And Moisture Seal Protective Cover

123498061
32 72 2 310 757: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-313-0300
Mounting Bracket

123130300
5801984-982330.000.0: RNCC: 2 | RNVC: 2
5801984-982330.000.0: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-12-346-1525
Access Cover

123461525
1000173-380030.001.0: RNCC: 2 | RNVC: 2
1000173-380030.001.0: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-310-3195
Plug Button

123103195
1000104-212200.10: RNCC: 3 | RNVC: 2
1000104-212200.10: RNCC: 5 | RNVC: 9

11 May 1987

5340-12-345-2425
Helical Compression Spring Seat

123452425
07.0880: RNCC: 3 | RNVC: 2
CAE00504: RNCC: 5 | RNVC: 2

16 Feb 1998

5340-12-346-4863
Helical Compression Spring Seat

123464863
CF 832 697 A: RNCC: 2 | RNVC: 2
CF 832 697 A: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-12-161-4292
Expansion Plug

121614292
100332-10410.24: RNCC: 2 | RNVC: 2
100332-10410.24: RNCC: 5 | RNVC: 2
100332-10410-24: RNCC: 5 | RNVC: 2
100332-10410-24: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-3991
Section Block Clamp

123543991
J29120264-001: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-379-9022
Bow Handle

123799022
120D152340.000.0: RNCC: 2 | RNVC: 2
120D152340.000.0: RNCC: 3 | RNVC: 2

10 Sep 2009

5340-12-365-3499
Angle Bracket

123653499
2300109-970380.002.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-326-9333
Mounting Bracket

123269333
2300232-971000.003.0: RNCC: 2 | RNVC: 2
2300232-971000.003.0: RNCC: 3 | RNVC: 2

12 Nov 1991

5340-12-370-5771
Dust And Moisture Seal Protective Plug

123705771
0004210311: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-12-199-4152
Door Handle

121994152
3094270020: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-377-8481
Manual Control Lever

123778481
5553661: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-12-312-2113
Mending Plate

123122113
4900123-911000.22: RNCC: 3 | RNVC: 2
4900123-911000.22: RNCC: 5 | RNVC: 2
4900123-911000.22: RNCC: 5 | RNVC: 9

4 Dec 1987

5340-12-360-3511
Angle Bracket

123603511
0009317307: RNCC: 3 | RNVC: 2
0009317307: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-182-8102
Extension Drawer Slide Section

121828102
GR4010T016: RNCC: 3 | RNVC: 2
GR4010T016: RNCC: 3 | RNVC: 9

27 Feb 1980

5340-12-367-0132
Mounting Plate

123670132
944910877: RNCC: 3 | RNVC: 2

29 Jun 2005

5340-12-366-6455
Mounting Bracket

123666455
BD5.250.178.220: RNCC: 3 | RNVC: 2

19 May 2005

5340-12-332-1297
Door Handle

123321297
1H0837207B: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-386-5074
Dust And Moisture Seal Protective Cap

123865074
ME6697-1: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-12-362-2850
Loop Clamp

123622850
LN9490BM9: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-197-7589
Loop Clamp

121977589
G-1532827-3: RNCC: 3 | RNVC: 2

22 Nov 1983

5340-12-386-6187
Mechanical Stop

123866187
2500262-394283.001.0: RNCC: 2 | RNVC: 2
2500262-394283.001.0: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-12-355-4833
Angle Bracket

123554833
3561.043.3: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-300-6362
Helical Compression Spring Retainer

123006362
1686-916122: RNCC: 3 | RNVC: 2

18 Aug 1984

5340-12-128-0293

5340-12-387-8663
Loop Clamp

123878663
7094063: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-187-8393
Retaining Strap

121878393
5809970190: RNCC: 3 | RNVC: 2

13 May 1981

5340-12-347-3504
Angle Bracket

123473504
4965.05.001: RNCC: 2 | RNVC: 2
4965.05.001: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-320-3875
Lock-Release Lever

123203875
107C530P2GAF: RNCC: 3 | RNVC: 2
107C530P2GAF: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-331-4778
Retaining Band

123314778
3874300640: RNCC: 3 | RNVC: 2

7 May 1993

5340-12-350-0016
Mechanical Stop

123500016
217.266.00.02.00: RNCC: 3 | RNVC: 2
2172660002: RNCC: 5 | RNVC: 2

4 Feb 2000

5340-12-135-6820

5340-12-135-7279

5340-12-386-9366
Dust And Moisture Seal Protective Cap

123869366
118804: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-150-7266

5340-12-163-9484
Dust And Moisture Seal Protective Cap

121639484
688024790: RNCC: 3 | RNVC: 2
24790: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-336-7459
Angle Bracket

123367459
160-75337: RNCC: 3 | RNVC: 2
160-75337: RNCC: 5 | RNVC: 9

19 Dec 1994

5340-12-391-5711
Section Block Clamp

123915711
I000777: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-12-333-4166
Loop Clamp

123334166
29157: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-327-6705
Nonmetallic Bumper

123276705
586075103: RNCC: 3 | RNVC: 2
586075103: RNCC: 5 | RNVC: 2
58 607 5103: RNCC: 5 | RNVC: 2

17 Feb 1992

5340-12-321-1438
Spring Loaded Cylinder Fastener

123211438
2500067-102562.00: RNCC: 2 | RNVC: 2
2500067-102562.00: RNCC: 3 | RNVC: 2

3 Apr 1990

5340-12-339-1215
Dust And Moisture Seal Protective Cap

123391215
250/35 POLYAMID: RNCC: 3 | RNVC: 2
024313: RNCC: 3 | RNVC: 2
GPN250/35 POLYAMID: RNCC: 5 | RNVC: 2
24313: RNCC: 5 | RNVC: 2

12 Oct 1995

5340-12-701-6992
Loop Clamp

127016992
VG95211-ML-127016992: RNCC: 2 | RNVC: 2
5.12.7230.1203.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-3374
Retaining Strap

121453374
X11-11J210: RNCC: 3 | RNVC: 2
10300227: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-383-4744
Electromagnetic Lock

123834744
34KLRR: RNCC: 3 | RNVC: 2

26 Oct 2010

5340-12-379-4495
Electronic Equipment Hardware Kit

123794495
146272: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-12-386-0107
Angle Bracket

123860107
T622M1003230: RNCC: 3 | RNVC: 2

29 Jul 2011

5340-12-380-4754
Retaining Strap

123804754
X00027838: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-350-3290
Dirt And Liquid Deflector

123503290
90.9915.10: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-12-135-6520

5340-12-135-7247

5340-12-335-3604
Mounting Plate

123353604
6700018-202210.00: RNCC: 2 | RNVC: 2
6700018-202210.00: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-12-307-1289
Access Cover

123071289
632-731000.19.0: RNCC: 3 | RNVC: 2

14 May 1986

5340-12-318-9024
Lock-Release Lever

123189024
9154.999.4: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-12-391-4653
Strap Fastener Loop

123914653
4100095-982119.100.0: RNCC: 2 | RNVC: 2
4100095-982119.100.0: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-175-7401
Resilient Mount

121757401
U-LAGER 782001.NR60.ST: RNCC: 3 | RNVC: 2
782001MITTEL: RNCC: 3 | RNVC: 2
7237ITEM44: RNCC: 5 | RNVC: 2
7237TEIL44: RNCC: 5 | RNVC: 2
57820010042: RNCC: 5 | RNVC: 2
H55 N917.11: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-12-330-2238
Angle Bracket

123302238
8-1142.10: RNCC: 2 | RNVC: 2
8-1142.10: RNCC: 3 | RNVC: 2
8-1142.10: RNCC: 5 | RNVC: 9
9896803: RNCC: 5 | RNVC: 9

17 Nov 1992

5340-12-316-3465
Resilient Mount

123163465
81100-30X20-M8X12-M8X16.NR45.ST: RNCC: 3 | RNVC: 2
01TC35187: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-12-344-0750
Manual Control Handle

123440750
SK60-200: RNCC: 3 | RNVC: 2
60-042: RNCC: 5 | RNVC: 2

8 Sep 1997

5340-12-315-1427
Dust And Moisture Seal Protective Plug

123151427
499226: RNCC: 3 | RNVC: 2
7193-0010-499226: RNCC: 5 | RNVC: 2

22 Sep 1988

5340-12-353-8601
Angle Bracket

123538601
J92220327-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-340-9916
Access Cover

123409916
68756-002: RNCC: 3 | RNVC: 2
986-0651-001: RNCC: 5 | RNVC: 2

12 Jul 1996

5340-12-157-8477
Dust And Moisture Seal Protective Plug

121578477
TL4-093: RNCC: 3 | RNVC: 1
4400-0000-0003: RNCC: 5 | RNVC: 2
990680004: RNCC: 5 | RNVC: 9
BM10X1HN16438: RNCC: 5 | RNVC: 9
BM10X1HN16438: RNCC: 5 | RNVC: 9
990680004: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-1892
Access Cover

123651892
2300348-065000.001.0: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-12-352-1042
Angle Bracket

123521042
2500238-041014.000.0: RNCC: 2 | RNVC: 2
2500238-041014.000.0: RNCC: 3 | RNVC: 2

17 Oct 2000

5340-12-344-1051
Flush Lock

123441051
2571000/000: RNCC: 3 | RNVC: 2
2571.000: RNCC: 5 | RNVC: 2
SZ 2571: RNCC: 5 | RNVC: 2
MJ206/09-02: RNCC: 5 | RNVC: 2

11 Sep 1997

5340-12-320-2259
Clamping Catch

123202259
2300231-180400.000.0: RNCC: 2 | RNVC: 2
2300231-180400.000.0: RNCC: 3 | RNVC: 2

20 Dec 1989

5340-12-356-1259
Bail Handle

123561259
M-38-030-13.0: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-121-0084
Strap Hinge

121210084
NO PRIMARY REF 12-121-0084: RNCC: 3 | RNVC: 2
1331831500: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-8942
Runner

123288942
63-029: RNCC: 3 | RNVC: 2

30 Jun 1992

5340-12-177-0740
Platte

121770740
5801214-2-044: RNCC: 3 | RNVC: 2
5801214-2.044: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-332-9346
Butt Hinge

123329346
706-182110-918-0: RNCC: 3 | RNVC: 2

7 Oct 1993

5340-12-355-5783
Mounting Bracket

123555783
2300458-410200.001.4: RNCC: 2 | RNVC: 2
1409926959: RNCC: 3 | RNVC: 2
2300458-410200.001.4: RNCC: 5 | RNVC: 2

27 Nov 2001

5340-12-354-1683
Mounting Bracket

123541683
23176-264120.05.0: RNCC: 2 | RNVC: 2
23176-264120.05.0: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-185-2258
Mounting Plate

121852258
81264500025: RNCC: 3 | RNVC: 2
489431: RNCC: 5 | RNVC: 2

23 Sep 1980

5340-12-304-1913
Metal Runner

123041913
9027018: RNCC: 3 | RNVC: 2
181811107000: RNCC: 5 | RNVC: 2

21 Jun 1985

5340-12-362-1480
Spacing Threaded Standoff

123621480
3842311950: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-12-320-3026
Double Angle Bracket

123203026
0240 9303: RNCC: 3 | RNVC: 2
02409303EE0147-44: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-352-3666
Support Hook

123523666
52.5105.020.05: RNCC: 3 | RNVC: 2
52.5105.020.05: RNCC: 5 | RNVC: 9

13 Nov 2000

5340-12-352-4825
Angle Bracket

123524825
T257M3012101: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-12-323-3187
Access Cover

123233187
6031420091: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-12-353-0185
Retaining Strap

123530185
CBD45018P02: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-12-391-4628
Loop Clamp

123914628
I001063: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-179-1522
Platte

121791522
5801215-791: RNCC: 3 | RNVC: 2

11 Jun 1979

5340-12-353-8509
Spacing Threaded Standoff

123538509
00411827: RNCC: 3 | RNVC: 2

15 May 2001

5340-12-302-2692
Magnetic Catch

123022692
2017.002: RNCC: 3 | RNVC: 2
28081TEIL32521: RNCC: 5 | RNVC: 2
2017A1/E20: RNCC: 5 | RNVC: 2
4196051: RNCC: 5 | RNVC: 2

13 Dec 1984

5340-12-167-0328
Double Angle Bracket

121670328
MY1141819R2: RNCC: 3 | RNVC: 2
GLZ1114E002-67: RNCC: 5 | RNVC: 2

11 Nov 1976

5340-12-183-2854
Mending Plate

121832854
5801441-30100.01: RNCC: 2 | RNVC: 2
5801441-30100.01: RNCC: 3 | RNVC: 2
5801441-30100-01: RNCC: 5 | RNVC: 2
5801441-30100-01: RNCC: 5 | RNVC: 9
5801441-30100.01: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-350-0056
Runner

123500056
2500238-162600.010.0: RNCC: 2 | RNVC: 2
2500238-162600.010.0: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-319-3348
Dust And Moisture Seal Protective Cap

123193348
1-LP-012-5-74-KK: RNCC: 3 | RNVC: 2
LP-012-5-74-KK: RNCC: 5 | RNVC: 2

25 Sep 1989

5340-12-351-4690
Angle Bracket

123514690
2500253-195300.000.0: RNCC: 3 | RNVC: 2

29 Jul 2000

5340-12-385-0812
Dust And Moisture Seal Protective Cap-Plug

123850812
D0119876-001: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-12-364-2475
Mounting Bracket

123642475
4256500442: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-364-6002
Fuehrungs- Schiene

123646002
3843: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-12-041-5713

5340-12-179-5446
Angle Bracket

121795446
4035510140: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-12-318-4429
Double Angle Bracket

123184429
42082191: RNCC: 3 | RNVC: 2
42082191ED50-8391: RNCC: 5 | RNVC: 2

14 Jul 1989

5340-12-180-9587
Dust And Moisture Seal Protective Plug

121809587
0337900050: RNCC: 3 | RNVC: 2

12 Oct 1979

5340-12-349-1892
Metal Grille

123491892
88521 15490: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-393-2837
Dust And Moisture Seal Protective Plug

123932837
01140973: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-12-371-6425
Mounting Bracket

123716425
38220.125.1.E: RNCC: 3 | RNVC: 2
POG054145: RNCC: 5 | RNVC: 2

2 May 2007

5340-12-317-1436
Access Door

123171436
400176701: RNCC: 2 | RNVC: 2
400176701: RNCC: 3 | RNVC: 2
04.54150-21200.00.2: RNCC: 5 | RNVC: 2

14 Mar 1989

5340-12-342-2050
Protection Bellows

123422050
152.942.2.4: RNCC: 3 | RNVC: 2
10.30.973806: RNCC: 5 | RNVC: 2
1030973806: RNCC: 5 | RNVC: 2

6 Jan 1997

5340-12-320-8432
Rod End Clevis

123208432
PH03.40: RNCC: 3 | RNVC: 2
E6844-4: RNCC: 5 | RNVC: 2

22 Feb 1990

5340-12-353-7569
Spacing Threaded Standoff

123537569
5.05.201: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-335-7800
Hinge Torsion Bar

123357800
2782-360000.007.0: RNCC: 2 | RNVC: 2
2782-360000.007.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-390-6752
Access Door Hinge

123906752
107W189730.000.0: RNCC: 2 | RNVC: 2
107W189730.000.0: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-12-352-4968
Mounting Bracket

123524968
521910-970131.000.0: RNCC: 2 | RNVC: 2
521910-970131.000.0: RNCC: 3 | RNVC: 2
1271550: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-327-7340
Catch Strike

123277340
CF 802 040 A: RNCC: 2 | RNVC: 2
CF 802 040 A: RNCC: 3 | RNVC: 2

25 Feb 1992

5340-12-010-8509

5340-12-317-1973
Nonmetallic Bumper

123171973
162063: RNCC: 3 | RNVC: 2
22 044 035 02 02: RNCC: 5 | RNVC: 2
0005440476: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-354-4483
Mounting Plate

123544483
0975038303: RNCC: 3 | RNVC: 2
06320P001021: RNCC: 5 | RNVC: 2

12 Jul 2001

5340-12-341-1638
Metallic Solid Wheel

123411638
202974-4607: RNCC: 3 | RNVC: 2

2 Aug 1996

5340-12-349-5015
Headless Straight Rod

123495015
T524M1501226: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-350-0060
Bow Handle

123500060
88970015010: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-384-6560
Dust And Moisture Seal Protective Cap

123846560
1Z9020.08000: RNCC: 3 | RNVC: 2
7095988: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-12-330-1395
Cane Bolt

123301395
10 0013 235: RNCC: 3 | RNVC: 2
100013235: RNCC: 5 | RNVC: 2

7 Nov 1992

5340-12-352-5008
Mounting Plate

123525008
03955800: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-12-348-3278
Nonmetallic Bumper

123483278
750.024: RNCC: 3 | RNVC: 2

1 Jun 1999

5340-12-028-0587

5340-12-347-9007
Runner

123479007
6070282338: RNCC: 3 | RNVC: 2
6070.2823.38: RNCC: 5 | RNVC: 2
6070.2823.38: RNCC: 5 | RNVC: 2

8 Mar 1999

5340-12-358-8736
Lock-Release Lever

123588736
028013305: RNCC: 3 | RNVC: 2
028013305: RNCC: 5 | RNVC: 9

25 Nov 2002

5340-12-388-2549
Spring Loaded Cylinder Fastener

123882549
22120.0744: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-12-303-9325
Folding Stay

123039325
200450: RNCC: 3 | RNVC: 2
200450: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-702-7937
Mounting Bracket

127027937
25-08301121624: RNCC: 2 | RNVC: 2

20 Dec 1995

5340-12-358-8603
Mending Plate

123588603
DSAN004: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-12-161-0920
Spring Tension Clip

121610920
160-26150-07: RNCC: 3 | RNVC: 2
160-26150-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-9777
Mounting Bracket

123189777
6500022-0500: RNCC: 3 | RNVC: 2
6500022-0500: RNCC: 5 | RNVC: 9

29 Aug 1989

5340-12-354-8317
Snap-In Plain Standoff

123548317
3205-0001: RNCC: 2 | RNVC: 2
3205-0001: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-363-9854
Dust And Moisture Seal Boot

123639854
GSC-15-80496-00: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-161-0621
Retaining Strap

121610621
160-25553-01: RNCC: 3 | RNVC: 2
160-25553-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-7844
Spring Loaded Cylinder Fastener

123397844
87-401.60-01.11-00: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-176-3586
Angle Bracket

121763586
8439820: RNCC: 3 | RNVC: 2
0018-254: RNCC: 5 | RNVC: 2
0018254: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-193-8415
Spring Tension Clip

121938415
C22234-A1000-C825: RNCC: 3 | RNVC: 2
C22234A1000C825: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-12-147-1349
Leather Strap

121471349
8404068: RNCC: 3 | RNVC: 2
0074043: RNCC: 5 | RNVC: 2
0074-043: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-161-3028
Snap Hook

121613028
DIN5299-E100NI: RNCC: 2 | RNVC: 2
DIN5299-E100-NI: RNCC: 3 | RNVC: 2
226-100X10 VERNICKELT: RNCC: 3 | RNVC: 9
E100DIN5299NP: RNCC: 5 | RNVC: 2
E100DIN5299VERNICKELT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-0336
Metal Runner

121950336
66.3505.210.01-A001: RNCC: 3 | RNVC: 2
582565: RNCC: 5 | RNVC: 2
66.3505.210.01A001: RNCC: 5 | RNVC: 2

4 Jan 1983

5340-12-165-9512
Nonmetallic Bumper

121659512
23111-3647.00: RNCC: 2 | RNVC: 2
23111-3647.00: RNCC: 3 | RNVC: 2
23111-3647.00: RNCC: 5 | RNVC: 9
23111-3647-00: RNCC: 5 | RNVC: 9

23 Jul 1976

5340-12-132-1482
Door Button

121321482
DIN7463-A1-10BK: RNCC: 2 | RNVC: 2
6020133: RNCC: 3 | RNVC: 2
DIN7463-A1-10-ROH: RNCC: 5 | RNVC: 2
2768032: RNCC: 5 | RNVC: 2
A1-10DIN7463-ROH: RNCC: 5 | RNVC: 2
A1-10DIN7463R0H: RNCC: 5 | RNVC: 2
A10DIN7463R0H: RNCC: 5 | RNVC: 2
50203: RNCC: 5 | RNVC: 2
06430200103: RNCC: 5 | RNVC: 2
DIN7463-A1-10GT-ROH: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-338-8012
Angle Bracket

123388012
6700017-202440.01: RNCC: 2 | RNVC: 2
6700017-202440.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-139-3356
Platte

121393356
C20302-A10-C65: RNCC: 3 | RNVC: 2
C20302A10C65: RNCC: 5 | RNVC: 2
TFS31-98975: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-9091
Handle Grip

123289091
2653-189330.00: RNCC: 2 | RNVC: 2
2653-189330.00: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-134-0939
Rod End Clevis

121340939
03431964: RNCC: 3 | RNVC: 2
3431964EF5029-27: RNCC: 5 | RNVC: 2
5167-27-06-03: RNCC: 5 | RNVC: 2
5167-27-06.03: RNCC: 5 | RNVC: 2
F5167-27-06-03: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-188-0899
Angle Bracket

121880899
1400056-000000.01: RNCC: 3 | RNVC: 2
1400056-000000-01: RNCC: 5 | RNVC: 9

2 Jun 1981

5340-12-700-8511
Loop Clamp

127008511
VG95211-ML-127008511: RNCC: 2 | RNVC: 2
155N1119-172: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-4774
Helical Compression Spring Seat

123424774
2019 5075: RNCC: 3 | RNVC: 2
201-95075: RNCC: 5 | RNVC: 2
20195075EF0140-08: RNCC: 5 | RNVC: 2

17 Feb 1997

5340-12-350-1243
Access Cover

123501243
409118503: RNCC: 3 | RNVC: 2
409.118503: RNCC: 5 | RNVC: 2

17 Feb 2000

5340-12-365-2736
Dust And Moisture Seal Protective Plug

123652736
0006890130: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-190-2564
Webbing Strap

121902564
81968024022: RNCC: 3 | RNVC: 2

16 Nov 1981

5340-12-363-6902
Angle Bracket

123636902
T531M3410210: RNCC: 2 | RNVC: 2
T531M3410210: RNCC: 3 | RNVC: 2

15 Jul 2004

5340-12-361-4709
Access Cover

123614709
2500262-748100.000.0: RNCC: 2 | RNVC: 2
2500262-748100.000.0: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-383-0113
Manual Control Handle

123830113
10127-183640.000.0: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-12-308-2877
Webbing Strap

123082877
S 1423: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-356-3693
Mounting Plate

123563693
115475: RNCC: 3 | RNVC: 2
6001.5.55.00: RNCC: 5 | RNVC: 2
54.0084.980.58: RNCC: 5 | RNVC: 9

19 Feb 2002

5340-12-358-8054
Nonmetallic Bumper

123588054
64292095: RNCC: 3 | RNVC: 2
520 518.4: RNCC: 5 | RNVC: 9

18 Nov 2002

5340-12-318-1273
Nut And Bolt Locking Plate

123181273
1000173-310000.008.0: RNCC: 2 | RNVC: 2
1000173-310000.008.0: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-357-5927
Spacing Threaded Standoff

123575927
2500261-991410.002.0: RNCC: 2 | RNVC: 2
2500261-991410.002.0: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-12-377-3406
Surface Bolt

123773406
8605001.3.550.21: RNCC: 3 | RNVC: 2
8605001355021: RNCC: 5 | RNVC: 2

12 Jan 2009

5340-12-198-3524
Angle Bracket

121983524
1880039: RNCC: 3 | RNVC: 2
75E5.27.20-4: RNCC: 5 | RNVC: 2

18 Jan 1984

5340-12-308-0340
Butt Hinge Leaf

123080340
4021.2774.3: RNCC: 3 | RNVC: 2

22 Aug 1986

5340-12-328-9592
Electrical-Mechanical Equipment Post

123289592
2 854 400 052: RNCC: 3 | RNVC: 2
2854400052: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-331-9522
Lock-Release Lever

123319522
0.20.0522.0: RNCC: 3 | RNVC: 2
0.20.522.0: RNCC: 5 | RNVC: 2

8 Jul 1993

5340-12-360-3248
Mounting Bracket

123603248
3513631419: RNCC: 3 | RNVC: 2
3513631419: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-180-2134
Angle Bracket

121802134
02523253: RNCC: 3 | RNVC: 2
2523253EE5022-71: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-323-8290
Mounting Plate

123238290
0289 6204: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-333-4431
Double Angle Bracket

123334431
81675600001: RNCC: 2 | RNVC: 2
81675600001: RNCC: 3 | RNVC: 2
81.67560.0001: RNCC: 5 | RNVC: 2

15 Dec 1993

5340-12-318-9071
Loop Clamp

123189071
200200.1000.013: RNCC: 3 | RNVC: 2
2002.10.00.013: RNCC: 3 | RNVC: 9

24 Aug 1989

5340-12-026-9424

5340-12-158-2046
Nut And Bolt Locking Plate

121582046
199036-551830-15: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-304-7832
Handle Grip

123047832
308.1-10.4: RNCC: 3 | RNVC: 2
P009271568720000: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-355-4460
Multiple Angle Bracket

123554460
2300348-060000.009.0: RNCC: 2 | RNVC: 2
2300348-060000.009.0: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-318-5315
Retaining Strap

123185315
9151830623: RNCC: 3 | RNVC: 2
467-41805183-02-22-00: RNCC: 5 | RNVC: 2

24 Jul 1989

5340-12-317-2323
Metal Runner

123172323
409018509: RNCC: 3 | RNVC: 2
409-018 509: RNCC: 5 | RNVC: 2

20 Mar 1989

5340-12-314-8984
Loop Clamp

123148984
DIN3015-SD4E-42PP-W1: RNCC: 2 | RNVC: 2
RCEG3-442: RNCC: 3 | RNVC: 2
GMV12-6042PPR-DPAL-AS: RNCC: 3 | RNVC: 2
HRES4S1TM42PP ST BL: RNCC: 3 | RNVC: 2
HRE4SS42PPTM: RNCC: 5 | RNVC: 2
HRES4S1TM42PP: RNCC: 5 | RNVC: 2
RCEG3-442: RNCC: 5 | RNVC: 2
GMV12-6042PPR-DPAL-AS: RNCC: 5 | RNVC: 2

24 Aug 1988

5340-12-701-8430
Loop Clamp

127018430
VG95211-ML-127018430: RNCC: 2 | RNVC: 2
5149A-10: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-186-7438
Angle Bracket

121867438
5802206-132000-002: RNCC: 2 | RNVC: 2
535.3381: RNCC: 3 | RNVC: 2
5353381: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-388-6740
Shimmy Damper

123886740
ESL18-05021002: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-12-702-5666
Rod End Clevis

127025666
VG95211-ML-127025666: RNCC: 2 | RNVC: 2
5.51.7614.0515.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-2932
Loop Clamp

123082932
P-875270-003: RNCC: 3 | RNVC: 2
P875270-003: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-701-3079
Mounting Plate

127013079
VG95211-ML-127013079: RNCC: 2 | RNVC: 2
5.12.5101.6491.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-387-6319
Mounting Plate

123876319
5803745-200200.00: RNCC: 2 | RNVC: 2
7802902120: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-12-309-0068
Handle Grip

123090068
GN598-KU-28-M10: RNCC: 3 | RNVC: 2

5 Dec 1986

5340-12-310-3337
Access Cover

123103337
0651201: RNCC: 3 | RNVC: 2
5340-12-178-1535: RNCC: 6 | RNVC: 9

11 May 1987

5340-12-161-3073
Rod End Clevis

121613073
160-88558-01: RNCC: 3 | RNVC: 2
160-88558-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-6576
Detent Plunger

123196576
5473901: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-025-4279

5340-12-381-1476
Shelf Bracket

123811476
4603100063: RNCC: 3 | RNVC: 2
715425: RNCC: 5 | RNVC: 2

14 Jan 2010

5340-12-337-2991
Key Blank

123372991
1447: RNCC: 3 | RNVC: 2

14 Feb 1995

5340-12-374-2571
Rod End Clevis

123742571
B521M1052201: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-353-8376
Angle Bracket

123538376
506 018 14 40: RNCC: 3 | RNVC: 2

15 May 2001

5340-12-331-2678
Access Cover

123312678
04184714: RNCC: 3 | RNVC: 2

14 Apr 1993

5340-12-195-8052
Nonmetallic Bumper

121958052
160-73303: RNCC: 3 | RNVC: 2
160-73303: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-159-7904
Nonmetallic Bumper

121597904
4049870060: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-349-6596
Mechanical Stop

123496596
2940.1312: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-175-1857
Retaining Strap

121751857
03350251: RNCC: 3 | RNVC: 2
3350251EF5093-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-304-4890
Double Angle Bracket

123044890
0241 8147: RNCC: 3 | RNVC: 2
K0002418147: RNCC: 5 | RNVC: 2
02418147KZ0147-39: RNCC: 5 | RNVC: 9
2418147KZ0147-39: RNCC: 5 | RNVC: 9
K0.00241-8147: RNCC: 5 | RNVC: 9

24 Jul 1985

5340-12-181-3182
Access Cover

121813182
SH9500E535: RNCC: 3 | RNVC: 2
SH9500E535: RNCC: 3 | RNVC: 9
1200072-013518-535: RNCC: 5 | RNVC: 9
1200072-013518.535: RNCC: 5 | RNVC: 9
SH9500E535: RNCC: 5 | RNVC: 9

14 Nov 1979

5340-12-343-2634
Mounting Plate

123432634
1297-011: RNCC: 3 | RNVC: 2

26 May 1997

5340-12-317-1656
Angle Bracket

123171656
C249-A10-B11: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-373-7863
Surface Bolt

123737863
J040G8015H518-000A0-037: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-12-337-7909
Angle Bracket

123377909
465-068711.000: RNCC: 3 | RNVC: 9
9890347: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-12-305-1950
Angle Bracket

123051950
5801763-010000.002: RNCC: 2 | RNVC: 2
5801763-010000.002: RNCC: 3 | RNVC: 2
5801763-010000.002: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-344-8810
Manual Control Lever

123448810
U15.155200.00-00: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-12-367-4402
Loop Clamp

123674402
883 9: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-184-9966
Butt Hinge Leaf

121849966
CF419888C: RNCC: 3 | RNVC: 2
CF 419 888 C: RNCC: 5 | RNVC: 2
CF419888C: RNCC: 5 | RNVC: 2
CF 419 888 C: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-342-6187
Double Angle Bracket

123426187
0001-161000-901-0: RNCC: 3 | RNVC: 2
0001-161000-901-0: RNCC: 5 | RNVC: 9

7 Mar 1997

5340-12-354-9016
Angle Bracket

123549016
V6516-00050-101: RNCC: 2 | RNVC: 2
V6516-00050-101: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-347-5425
Dust And Moisture Seal Protective Cover

123475425
1000255-000033: RNCC: 3 | RNVC: 2

5 Jan 1999

5340-12-198-8581
Support Hook

121988581
B-226669: RNCC: 3 | RNVC: 2
PLEI00277TEILE6: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-180-6767
Webbing Strap

121806767
R20224: RNCC: 3 | RNVC: 2
R20224: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-191-0499
Leather Strap

121910499
CF 339 438 AU: RNCC: 3 | RNVC: 2
CF 339 438 AU: RNCC: 5 | RNVC: 2

7 Jan 1982

5340-12-391-3659
Mounting Bracket

123913659
I010841: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-318-7976
Mounting Bracket

123187976
42087614: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-194-4202
Resilient Mount

121944202
PAN5174C02: RNCC: 3 | RNVC: 2

3 Nov 1982

5340-12-303-9379
Caster Frame

123039379
24944: RNCC: 3 | RNVC: 2

22 May 1985

5340-12-300-3443
Dust And Moisture Seal Protective Plug

123003443
600B198: RNCC: 3 | RNVC: 2
0745150613: RNCC: 5 | RNVC: 2
600B198: RNCC: 5 | RNVC: 2
GPN600B198: RNCC: 5 | RNVC: 2
GPN600B198: RNCC: 5 | RNVC: 2
GPN600,B198: RNCC: 5 | RNVC: 9
6000198000: RNCC: 5 | RNVC: 9

26 Jul 1984

5340-12-300-8482
Retaining Strap

123008482
3434920140: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-371-3673
Helical Compression Spring Seat

123713673
R900108247: RNCC: 3 | RNVC: 2
108247: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-12-311-9330
Ball Socket Seat

123119330
5D10066: RNCC: 3 | RNVC: 2

29 Oct 1987

5340-12-318-0021
Resilient Mount

123180021
81962100267: RNCC: 3 | RNVC: 2
81.96210.0267: RNCC: 5 | RNVC: 2

2 Jun 1989

5340-12-131-5495

5340-12-190-8502
Spring Tension Clip

121908502
3830022002: RNCC: 3 | RNVC: 2
38300 22002: RNCC: 5 | RNVC: 9

17 Dec 1981

5340-12-152-8270
Clamping Catch

121528270
37319-500: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-185-7335
Dust And Moisture Seal Protective Plug

121857335
900A15: RNCC: 3 | RNVC: 2
900001500: RNCC: 5 | RNVC: 2
GPN900,A15: RNCC: 5 | RNVC: 2
A15: RNCC: 5 | RNVC: 2
A15GPN900: RNCC: 5 | RNVC: 2
GPN900A15: RNCC: 5 | RNVC: 2
138-525: RNCC: 5 | RNVC: 2
01161250: RNCC: 5 | RNVC: 2

28 Oct 1980

5340-12-164-5810
Loop Clamp

121645810
689724517: RNCC: 3 | RNVC: 2
24517: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-8765
Loop Clamp

123758765
976329: RNCC: 3 | RNVC: 2

16 Jul 2008

5340-12-177-7968
Dust And Moisture Seal Protective Plug

121777968
SP4ROT: RNCC: 3 | RNVC: 2
SP4R0T: RNCC: 3 | RNVC: 2
SP4R0T: RNCC: 5 | RNVC: 2

21 Feb 1979

5340-12-331-9125
Angle Bracket

123319125
160-20661: RNCC: 3 | RNVC: 2
160-20661: RNCC: 5 | RNVC: 9

6 Jul 1993

5340-12-010-7462

5340-12-180-0606
Manual Control Handle

121800606
81611800095: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-372-5705
Angle Bracket

123725705
9414319340: RNCC: 3 | RNVC: 2
A9414319340: RNCC: 5 | RNVC: 2

30 Jul 2007

5340-12-360-4121
Mounting Plate

123604121
3514321106: RNCC: 3 | RNVC: 2
3514321106: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-185-5725
Helical Compression Spring Seat

121855725
0287 8891: RNCC: 3 | RNVC: 2
2878891: RNCC: 5 | RNVC: 2
2878891EE0704-51: RNCC: 5 | RNVC: 2

16 Oct 1980

5340-12-136-3696

5340-12-377-6384
Retaining Strap

123776384
34293: RNCC: 3 | RNVC: 2

30 Jan 2009

5340-12-337-4434
Retaining Strap

123374434
0009954565: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-12-305-0736
Metal Runner

123050736
409059309: RNCC: 3 | RNVC: 2
5800.4048: RNCC: 5 | RNVC: 2
409.059 309: RNCC: 5 | RNVC: 2
5800.4048D: RNCC: 5 | RNVC: 2

24 Sep 1985

5340-12-026-9707

5340-12-348-6692
Metallic Bumper

123486692
1021601: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-326-6880
Resilient Mount

123266880
DIN95363-B30X30-NBR45ST: RNCC: 2 | RNVC: 2
510027-M8X20.NBR45.ST: RNCC: 5 | RNVC: 2
0716110177: RNCC: 5 | RNVC: 2
VG95363-B30X30-NBR45ST: RNCC: 5 | RNVC: 9

22 Oct 1991

5340-12-351-0666
Mechanical Stop

123510666
2500113-2400.09: RNCC: 2 | RNVC: 2
2500113-2400.09: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-12-174-7906
Door Button

121747906
009-039.160-005: RNCC: 3 | RNVC: 2
12791-130000-005: RNCC: 5 | RNVC: 2
009-039-160-005: RNCC: 5 | RNVC: 9
12791-130000-005: RNCC: 5 | RNVC: 9
12791-130000.005: RNCC: 5 | RNVC: 9

3 Aug 1978

5340-12-179-2872
Retaining Strap

121792872
7834216: RNCC: 3 | RNVC: 2
7834-216: RNCC: 5 | RNVC: 2

20 Jun 1979

5340-12-185-3237
Retaining Band

121853237
2315-167: RNCC: 3 | RNVC: 2
2315167: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-196-7475
Retaining Strap

121967475
23783-001: RNCC: 3 | RNVC: 2
23783001: RNCC: 5 | RNVC: 2
910: RNCC: 5 | RNVC: 9

10 Aug 1983

5340-12-340-9217
Protection Bellows

123409217
V6-1019: RNCC: 3 | RNVC: 2
9390000014: RNCC: 5 | RNVC: 2
V61019: RNCC: 5 | RNVC: 2
1215 2343: RNCC: 5 | RNVC: 2

3 Jul 1996

5340-12-703-3069
Mending Plate

127033069
VG95211-ML-127033069: RNCC: 2 | RNVC: 2
5.12.2210.1603.02: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-702-4086
Angle Bracket

127024086
VG95211-ML-127024086: RNCC: 2 | RNVC: 2
5.12.6105.0854.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-326-3493
Nonmetallic Bumper

123263493
335909-0402.000: RNCC: 2 | RNVC: 2
335909-0402.000: RNCC: 3 | RNVC: 2
335909-0402.000: RNCC: 5 | RNVC: 9

4 Sep 1991

5340-12-171-0820
Butt Hinge Leaf

121710820
2329-2200.00: RNCC: 2 | RNVC: 2
2329-2200.00: RNCC: 3 | RNVC: 2
2329-2200-00: RNCC: 5 | RNVC: 9
2329-2200.00: RNCC: 5 | RNVC: 9

7 Sep 1977

5340-12-336-6165
Webbing Strap

123366165
2500243-981020.00: RNCC: 2 | RNVC: 2
2768.03-1020.00: RNCC: 3 | RNVC: 2
2500243-981020.00: RNCC: 5 | RNVC: 2

1 Dec 1994

5340-12-197-4159
Angle Bracket

121974159
64414222: RNCC: 3 | RNVC: 2
4414/222: RNCC: 5 | RNVC: 9
5801357-7300.08: RNCC: 5 | RNVC: 9
5801357-7300-08: RNCC: 5 | RNVC: 9
5801357-7300.08: RNCC: 5 | RNVC: 9
5801357-7300-08: RNCC: 5 | RNVC: 9

20 Oct 1983

5340-12-370-2357
Mounting Bracket

123702357
E32329-00: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-12-701-8552
Loop Clamp

127018552
VG95211-ML-127018552: RNCC: 2 | RNVC: 2
5891A-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-133-5480
Friction Catch Stud Receptacle

121335480
C40335-B12-B30: RNCC: 3 | RNVC: 2
C40335B12B30: RNCC: 5 | RNVC: 2
30853: RNCC: 5 | RNVC: 2
9RELSTP12TZ30: RNCC: 5 | RNVC: 9
30853: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-0296
Folding Stay

123200296
CF 832 357 BR: RNCC: 2 | RNVC: 2
CF 832 357 BR: RNCC: 3 | RNVC: 2
CF832357AR: RNCC: 5 | RNVC: 2
CF 832 357 BR: RNCC: 5 | RNVC: 2
CF832357AR: RNCC: 5 | RNVC: 2

29 Nov 1989

5340-12-302-0634
Catch Strike

123020634
3819190421: RNCC: 3 | RNVC: 2

29 Nov 1984

5340-12-374-2934
Angle Bracket

123742934
5323676: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-379-9989
Access Cover

123799989
WW410209B: RNCC: 3 | RNVC: 2
WW410209B: RNCC: 5 | RNVC: 2

17 Sep 2009

5340-12-191-1973
Permanent Magnet

121911973
6110GRPM1: RNCC: 3 | RNVC: 2

18 Jan 1982

5340-12-318-3504
Webbing Strap

123183504
T50694: RNCC: 3 | RNVC: 2
T50694: RNCC: 5 | RNVC: 9

6 Jul 1989

5340-12-361-9973
Retaining Strap

123619973
030200409: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-189-3008
Butt Hinge Leaf

121893008
33854 01: RNCC: 3 | RNVC: 2
3385401: RNCC: 5 | RNVC: 2

16 Sep 1981

5340-12-166-1134
Turnbuckle Body

121661134
DIN1479SPM6-A2P: RNCC: 2 | RNVC: 2
SP-DIN1479-M6-A2P: RNCC: 3 | RNVC: 2
5500006V: RNCC: 5 | RNVC: 2
001479006001: RNCC: 5 | RNVC: 2
M6DIN1479GALZN5C: RNCC: 5 | RNVC: 2
M6DIN1479VERZINKT: RNCC: 5 | RNVC: 2
SPM6DIN1479VERZINKT: RNCC: 5 | RNVC: 2
DIN1479-M6-A2P: RNCC: 5 | RNVC: 9

31 Jul 1976

5340-12-340-9615
Dust And Moisture Seal Protective Plug

123409615
650/80: RNCC: 3 | RNVC: 2
GPN650/80: RNCC: 5 | RNVC: 2
GPN 650/80: RNCC: 5 | RNVC: 9

10 Jul 1996

5340-12-353-1802
Loop Clamp

123531802
VG95211-ML-123531802: RNCC: 2 | RNVC: 2
L193364: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-131-5320
Expansion Plug

121315320
DIN443-50-ST-ROH: RNCC: 2 | RNVC: 2
50DIN443R0H: RNCC: 5 | RNVC: 2
0630 361 026: RNCC: 5 | RNVC: 2
50DIN443: RNCC: 5 | RNVC: 2
50DIN443: RNCC: 5 | RNVC: 2
0630361026: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-2605
Double Angle Bracket

121642605
2360-069620.01.0: RNCC: 2 | RNVC: 2
2360-069620.01.0: RNCC: 3 | RNVC: 2
2360-069620-01-0: RNCC: 5 | RNVC: 2
2360-069620-01-0: RNCC: 5 | RNVC: 2
2360-069620.01.0: RNCC: 5 | RNVC: 2
2360-069620.01.0: RNCC: 5 | RNVC: 9
2360-069620-01-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-2141
Loop Clamp

121802141
DIN71555-85,5ZN: RNCC: 2 | RNVC: 2
DIN71555-85,5ZN: RNCC: 3 | RNVC: 2
DIN71555-85,5ZN: RNCC: 3 | RNVC: 2
DIN71555-85,5ZN: RNCC: 5 | RNVC: 2
DIN71555-85,5: RNCC: 5 | RNVC: 9
DIN71555-85-5: RNCC: 5 | RNVC: 9
85-5DIN71555: RNCC: 5 | RNVC: 9
DIN71555-85,5: RNCC: 5 | RNVC: 9
DIN71555-85-5: RNCC: 5 | RNVC: 9
5500100085: RNCC: 5 | RNVC: 9

30 Aug 1979

5340-12-321-4883
Bow Handle

123214883
702-238320-902-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-328-9163
Bow Handle

123289163
CF 842 141 A: RNCC: 3 | RNVC: 2
CF842141A: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-393-0344
Access Cover

123930344
1030105-182003.000.0: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-349-8209
Dust And Moisture Seal Protective Plug

123498209
46 54 2 315 618: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-337-6637
Mounting Bracket

123376637
187504301: RNCC: 2 | RNVC: 2
187504301: RNCC: 3 | RNVC: 2
D 18 750 4301: RNCC: 5 | RNVC: 2
167502803: RNCC: 5 | RNVC: 9

23 Mar 1995

5340-12-321-6571
Helical Compression Spring Retainer

123216571
2.72-28418: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-359-7298
Angle Bracket

123597298
2 854 630 671: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-122-1368

5340-12-352-3800
Mending Plate

123523800
T531M1613201: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-12-354-6483
Mending Plate

123546483
00644746: RNCC: 3 | RNVC: 2
06420P005024: RNCC: 5 | RNVC: 2

10 Aug 2001

5340-12-348-7189
Mounting Plate

123487189
800005101: RNCC: 3 | RNVC: 2
F800005101: RNCC: 5 | RNVC: 2

10 Aug 1999

5340-12-127-3703
Loop Clamp

121273703
81974505000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-360-2111
Mounting Bracket

123602111
81424035360: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-385-4958
Pad Eye

123854958
6422230241: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-334-3742
Access Cover

123343742
53.1530.030.00: RNCC: 3 | RNVC: 2

3 May 1994

5340-12-094-1983

5340-12-363-0511
Angle Bracket

123630511
82657400017: RNCC: 3 | RNVC: 2
82.65740.0017: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-300-3123
Angle Bracket

123003123
3098820142: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-025-3591

5340-12-361-4341
Loop Clamp

123614341
1504309: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-386-1787
Webbing Strap

123861787
04057: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-091-3390

5340-12-300-8481
Loop Clamp

123008481
3354910040: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-306-5639
Dust And Moisture Seal Protective Cap-Plug

123065639
600B320: RNCC: 3 | RNVC: 2
GPN600B320: RNCC: 5 | RNVC: 2
B320: RNCC: 5 | RNVC: 9
GPN600,B320: RNCC: 5 | RNVC: 9
600032000: RNCC: 5 | RNVC: 9

11 Mar 1986

5340-12-334-9746
Mounting Bracket

123349746
27 0319 257: RNCC: 2 | RNVC: 2
27 0319 257: RNCC: 3 | RNVC: 2

7 Jul 1994

5340-12-352-2971
Dust And Moisture Seal Protective Plug

123522971
5205576: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-377-2784
Mounting Bracket

123772784
41269684: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-12-334-8778
Nut And Bolt Locking Plate

123348778
5559940130: RNCC: 3 | RNVC: 2
5559940130: RNCC: 5 | RNVC: 2
555 994 01 30: RNCC: 5 | RNVC: 2
5559940130: RNCC: 5 | RNVC: 2

30 Jun 1994

5340-12-388-4464
Mounting Plate

123884464
5842032540: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-185-2940
Nonmetallic Bumper

121852940
3603230085: RNCC: 3 | RNVC: 2

25 Sep 1980

5340-12-365-7657
Retaining Clip

123657657
9438990014: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-351-8214
Double Angle Bracket

123518214
5560920040: RNCC: 3 | RNVC: 2
556 092 00 40: RNCC: 5 | RNVC: 2

29 Aug 2000

5340-12-326-5393
Electrical-Mechanical Equipment Post

123265393
1666288: RNCC: 3 | RNVC: 2
00.934.63218.000: RNCC: 5 | RNVC: 2
065.151.10.00.00: RNCC: 5 | RNVC: 2
934.63218: RNCC: 5 | RNVC: 2
1666288: RNCC: 5 | RNVC: 2

2 Oct 1991

5340-12-091-0892

5340-12-164-6731
Manual Control Handle

121646731
DIN99-L50: RNCC: 2 | RNVC: 2
L50DIN99: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-359-2453
Headless Straight Rod

123592453
VS8550G020: RNCC: 3 | RNVC: 2
VS8550G020: RNCC: 5 | RNVC: 9

15 Jan 2003

5340-12-377-4329
T Bracket

123774329
1690-514130.000.0: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-329-5228
Mounting Bracket

123295228
2500229-280000.004.0: RNCC: 2 | RNVC: 2
2500229-280000.004.0: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-12-385-7510
T Bracket

123857510
JSE010.001: RNCC: 3 | RNVC: 2
62800343: RNCC: 5 | RNVC: 2
IMT01036: RNCC: 5 | RNVC: 2

6 Jul 2011

5340-12-159-8315
Dust And Moisture Seal Protective Plug

121598315
37316-001: RNCC: 3 | RNVC: 2
37316-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-359-4333
Webbing Strap

123594333
16250600: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-342-6509
Elastic Strap

123426509
04784894: RNCC: 3 | RNVC: 2
4784894: RNCC: 5 | RNVC: 2
4784894KZ: RNCC: 5 | RNVC: 2
V4784894: RNCC: 5 | RNVC: 2

11 Mar 1997

5340-12-302-1425
Swivel Caster

123021425
501299: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-302-1675
Double Angle Bracket

123021675
4112156: RNCC: 3 | RNVC: 2
S12B.S02.00.00.002: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-316-7324
Mending Plate

123167324
51-53215: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-12-329-4702
Mending Plate

123294702
4618202314: RNCC: 3 | RNVC: 2

21 Aug 1992

5340-12-372-5759
Nut And Bolt Head Protective Cap

123725759
5400053-772000.04: RNCC: 2 | RNVC: 2
5400053-772000.04: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-12-183-8122
Dust And Moisture Seal Protective Cap

121838122
181867369: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-357-0272
Extension Drawer Slide

123570272
4900347-200000.12: RNCC: 2 | RNVC: 2
4900347-200000.12: RNCC: 3 | RNVC: 2

25 Apr 2002

5340-12-358-0861
Mechanical Stop

123580861
2800-191800.012.0: RNCC: 2 | RNVC: 2
2800-191800.012.0: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-371-4785
Angle Bracket

123714785
23302-183710.06: RNCC: 2 | RNVC: 2
23302-183710.06: RNCC: 3 | RNVC: 2
2662496: RNCC: 5 | RNVC: 2
3-2662-496: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-351-4679
Mounting Plate

123514679
2500238-042100.001.0: RNCC: 2 | RNVC: 2
2500238-042100.001.0: RNCC: 3 | RNVC: 2

29 Jul 2000

5340-12-362-6749
Mounting Bracket

123626749
2500309-190090.000.0: RNCC: 2 | RNVC: 2
2500309-190090.000.0: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-319-0311
Access Cover

123190311
2654-330000.03: RNCC: 2 | RNVC: 2
2654-330000.03: RNCC: 3 | RNVC: 2
2654-330 000.03: RNCC: 5 | RNVC: 9
679-00000000.03: RNCC: 5 | RNVC: 9
679-00000000.03: RNCC: 5 | RNVC: 9

31 Aug 1989

5340-12-376-8632
Spring Loaded Cylinder Fastener

123768632
GN 612-5-M12X1.5-AK-NI: RNCC: 3 | RNVC: 2
GN.34315: RNCC: 5 | RNVC: 2

13 Nov 2008

5340-12-199-5368
Nonmetallic Bumper

121995368
0663005100: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-321-9125
Lock-Release Lever

123219125
B183711075: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-330-1325
Strap Hinge

123301325
10 0014 349: RNCC: 3 | RNVC: 2
100014349: RNCC: 5 | RNVC: 2

6 Nov 1992

5340-12-070-2068

5340-12-305-2982
Resilient Mount

123052982
DIN95363-B25X15-NR65ST: RNCC: 2 | RNVC: 2
20292A/B-BSTN6590: RNCC: 5 | RNVC: 2
1.25.15.3.65NR/ST: RNCC: 5 | RNVC: 2
81110-25X15-M6X19.NR65.ST: RNCC: 5 | RNVC: 2
20292A/V-BSTN6590: RNCC: 5 | RNVC: 2
20292A/V-SM650: RNCC: 5 | RNVC: 2
811.010.025.015.06X18.NR65.ST: RNCC: 5 | RNVC: 2
81110-25X15-M6X20.NR65.ST: RNCC: 5 | RNVC: 2
VG95363-B25X15-NR65ST: RNCC: 5 | RNVC: 9

18 Oct 1985

5340-12-701-4805
Mounting Bracket

127014805
VG95211-ML-127014805: RNCC: 2 | RNVC: 2
5.12.5811.1560.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-326-4335
Lock-Release Lever

123264335
330708-8014.000: RNCC: 2 | RNVC: 2
330708-8014.000: RNCC: 3 | RNVC: 2
330708-8014-000: RNCC: 5 | RNVC: 2
330708-8014.000: RNCC: 5 | RNVC: 9

16 Sep 1991

5340-12-167-0017
Helical Compression Spring Retainer

121670017
23290-142004-004: RNCC: 2 | RNVC: 2
23290-142004.004: RNCC: 5 | RNVC: 9

11 Nov 1976

5340-12-122-3301
Nonmetallic Bumper

121223301
VG95092B12X5X28X5X10-PUR60: RNCC: 2 | RNVC: 2
VG95092B12X5X28X5X10-PUR60: RNCC: 3 | RNVC: 2
GH269: RNCC: 5 | RNVC: 2
0009871540: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-314-1243
Mounting Bracket

123141243
6205410440: RNCC: 3 | RNVC: 2
620 541 04 40: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-317-3600
Protection Bellows

123173600
4B69986: RNCC: 3 | RNVC: 2
1696655: RNCC: 5 | RNVC: 2

31 Mar 1989

5340-12-381-3699
Retaining Band

123813699
9180487110: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-12-322-3632
Metallic Bumper

123223632
1206527: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-348-6776
Mounting Bracket

123486776
2300387-700850.014: RNCC: 2 | RNVC: 2
9911475: RNCC: 3 | RNVC: 2
2300387-700850.014: RNCC: 5 | RNVC: 9
9911475: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-317-1985
Strap Hinge

123171985
3227200737: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-393-4027
Mounting Plate

123934027
4139 301 494: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-315-9155
Key Blank

123159155
0007665306: RNCC: 3 | RNVC: 2
000 766 53 06: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-317-7456
Mounting Bracket

123177456
320-992115: RNCC: 3 | RNVC: 2

8 May 1989

5340-12-157-7651
Strap Hinge

121577651
107823001: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-372-4340
Nonmetallic Bumper

123724340
42017909302: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-12-357-7107
Butt Hinge Leaf

123577107
A2528657120000: RNCC: 3 | RNVC: 2
A2528657120000: RNCC: 5 | RNVC: 9

15 Jul 2002

5340-12-378-2293
Mounting Plate

123782293
41035460: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-12-138-3886

5340-12-365-0701
Double Angle Bracket

123650701
4616831014: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-387-5695
Mounting Plate

123875695
BD9102E793: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-392-6039
Spring Tension Clip

123926039
M2807001120600: RNCC: 3 | RNVC: 2

21 Jun 2013

5340-12-145-6665

5340-12-341-6088
Butt Hinge

123416088
631222: RNCC: 3 | RNVC: 9

1 Oct 1996

5340-12-324-3923
Rigid Caster

123243923
1641985: RNCC: 3 | RNVC: 2
1641984: RNCC: 5 | RNVC: 9
1641982: RNCC: 5 | RNVC: 9

12 Feb 1991

5340-12-370-2121
Mechanical Stop

123702121
44-55853: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-12-324-9394
Mounting Plate

123249394
4231066024: RNCC: 3 | RNVC: 2

12 Apr 1991

5340-12-141-4851
Vent Plug

121414851
D08032: RNCC: 3 | RNVC: 2
D8032: RNCC: 5 | RNVC: 2
D08032: RNCC: 5 | RNVC: 9
D8032: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-4712
Mounting Bracket

123164712
54.0026.210.00: RNCC: 3 | RNVC: 2
54002621000: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-343-5557
Schwenkb Laufrolle

5340-12-144-4377

5340-12-092-3837

5340-12-197-8187
Mending Plate

121978187
2539001: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-12-321-7205
Mounting Bracket

123217205
40 0166 595: RNCC: 2 | RNVC: 2
40 0166 595: RNCC: 3 | RNVC: 2
40 0166 595: RNCC: 5 | RNVC: 9

19 Jun 1990

5340-12-186-5437
Plain Solid Disk

121865437
051531: RNCC: 3 | RNVC: 2

14 Jan 1981

5340-12-183-0588
Loop Clamp

121830588
DIN3016-1-D2-6-12X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-6-12X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.6-12/12: RNCC: 3 | RNVC: 2
4219050006: RNCC: 5 | RNVC: 2
RSGU1100-6-12-12: RNCC: 5 | RNVC: 2
RSGU1100.6-12/12: RNCC: 5 | RNVC: 2
DIN3016-D2-6-12X12-W1-2: RNCC: 5 | RNVC: 9

15 Mar 1980

5340-12-148-9294
Webbing Strap

121489294
23176-262181.00.0: RNCC: 2 | RNVC: 2
82300-23176-262181.00.0: RNCC: 3 | RNVC: 2
23176-262181-00-0: RNCC: 5 | RNVC: 2
23176-262181.00.0: RNCC: 5 | RNVC: 2
23176-262181-00-0: RNCC: 5 | RNVC: 9
23176-262181.00.0: RNCC: 5 | RNVC: 9
82300-C510X30-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-338-8395
Mounting Bracket

123388395
463-151524.000: RNCC: 3 | RNVC: 9
9897639: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-177-9004
Handwheel

121779004
2300002-184110.002: RNCC: 2 | RNVC: 2
2300002-184110.002: RNCC: 3 | RNVC: 2
2300002-184110-002: RNCC: 5 | RNVC: 9
2300002-184110.002: RNCC: 5 | RNVC: 9

7 Mar 1979

5340-12-345-3103
Manual Control Lever

123453103
9894561: RNCC: 3 | RNVC: 9
462-190156.000: RNCC: 5 | RNVC: 9

2 Mar 1998

5340-12-342-7665
Access Cover

123427665
9892733: RNCC: 3 | RNVC: 9
454-250732.000: RNCC: 5 | RNVC: 9

26 Mar 1997

5340-12-163-3198
Expansion Plug

121633198
4039970720: RNCC: 3 | RNVC: 2
4039970720: RNCC: 3 | RNVC: 2
51.91606-0041: RNCC: 5 | RNVC: 2
51916060041: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-339-3903
Angle Bracket

123393903
463-064000.001: RNCC: 3 | RNVC: 2
463-064000.001: RNCC: 5 | RNVC: 9
9893890: RNCC: 5 | RNVC: 9

20 Nov 1995

5340-12-347-5274
Mounting Bracket

123475274
9895004: RNCC: 3 | RNVC: 9
462-151162.000: RNCC: 5 | RNVC: 9

29 Dec 1998

5340-12-338-5288
Access Cover

123385288
MM 2310 T 001: RNCC: 3 | RNVC: 2
01632: RNCC: 5 | RNVC: 9
MM 2310 T 001: RNCC: 5 | RNVC: 9
MM 2310 T 001-1: RNCC: 5 | RNVC: 9

24 Jul 1995

5340-12-304-4317
Dust And Moisture Seal Protective Cap

123044317
4/0953/7003/1: RNCC: 2 | RNVC: 2
4/0953/7003/1: RNCC: 3 | RNVC: 2

17 Jul 1985

5340-12-343-9258
Rod End Clevis

123439258
43298309-001: RNCC: 3 | RNVC: 2
4-43298309: RNCC: 5 | RNVC: 2
43 298 309-001: RNCC: 5 | RNVC: 2
GB6A-9 KEY9: RNCC: 5 | RNVC: 2

14 Aug 1997

5340-12-356-1296
Handle Grip

123561296
9050001002: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-332-6602
Angle Bracket

123326602
81671650042: RNCC: 2 | RNVC: 2
81671650042: RNCC: 3 | RNVC: 2
81.67165.0042: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-199-5304
Double Angle Bracket

121995304
8370160697: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-316-2938
Angle Bracket

123162938
6389888: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-175-4074
Mounting Bracket

121754074
03133000: RNCC: 3 | RNVC: 2
03133000.243: RNCC: 5 | RNVC: 2

13 Sep 1978

5340-12-171-4354
Angle Bracket

121714354
10746: RNCC: 3 | RNVC: 2
10746A: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-393-1528
Spacing Threaded Standoff

123931528
4000004171: RNCC: 3 | RNVC: 2

14 Aug 2013

5340-12-394-1912
Mounting Bracket

123941912
L311M1603108: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-365-7784
Mounting Plate

123657784
288170377: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-12-378-3220
Roller Holder

123783220
5400053-372518.01: RNCC: 2 | RNVC: 2
5400053-372518.01: RNCC: 3 | RNVC: 2

27 Mar 2009

5340-12-365-8414
Swivel Caster

123658414
146343: RNCC: 3 | RNVC: 2
PG LAK 74/300/75K: RNCC: 5 | RNVC: 2

11 Feb 2005

5340-12-379-4035
Mounting Plate

123794035
2300334-033000.001: RNCC: 2 | RNVC: 2
2300334-033000.001: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-376-2017
Retaining Band

123762017
55-044-85: RNCC: 3 | RNVC: 2
2166 2238-362: RNCC: 5 | RNVC: 2

25 Aug 2008

5340-12-155-7890
Resilient Mount

121557890
DIN95363-E25X20-M6X7-NR55ST: RNCC: 2 | RNVC: 2
0056025008: RNCC: 5 | RNVC: 2
81170-25X20-M6X7.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-E25X20-M6X7-NR55ST: RNCC: 5 | RNVC: 9
VG95363-E25X20-NR55ST-M6X7: RNCC: 5 | RNVC: 9
BG4-40-25N: RNCC: 5 | RNVC: 9
BG4.40-25N 7MM ZAPFENLAENGE: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-6415
Webbing Strap

121996415
2300087-104123.00: RNCC: 2 | RNVC: 2
2300087-104123.00: RNCC: 3 | RNVC: 2
5801435-010620.00: RNCC: 5 | RNVC: 2
2300087-104123.00: RNCC: 5 | RNVC: 9
5801435-010620-00: RNCC: 5 | RNVC: 9
5801435-010620-00: RNCC: 5 | RNVC: 9
5801435-010620.00: RNCC: 5 | RNVC: 9
9843976: RNCC: 5 | RNVC: 9
2300087-104123.00: RNCC: 5 | RNVC: 9
000-B2-25X2,0X200-PE-RAL6031: RNCC: 6 | RNVC: 9

18 May 1984

5340-12-391-0428
Electronic Equipment Hardware Kit

123910428
601291-600200.00: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-389-2401
Mounting Plate

123892401
136-041.00-046: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-12-375-9772
Loop Clamp

123759772
35455A: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-12-370-7296
Extension Drawer Slide

123707296
171881213B2VK: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-12-358-3500
Shimmy Damper

123583500
62216010: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-360-2936
Padlock

123602936
A00651B 50MM: RNCC: 3 | RNVC: 2
K125505D: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-377-1800
Loop Clamp

123771800
RSGU1.36/15-W3: RNCC: 3 | RNVC: 2
41222261: RNCC: 5 | RNVC: 2
41231071 TEIL 41222261: RNCC: 5 | RNVC: 2

16 Dec 2008

5340-12-166-9573
Flush Lock

121669573
6L3743-004-706764: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-12-701-8432
Loop Clamp

127018432
VG95211-ML-127018432: RNCC: 2 | RNVC: 2
5149A-16: RNCC: 3 | RNVC: 2
0500812907729: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-350-2188
Plain Solid Disk

123502188
610-092: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-12-187-6128
Loop Clamp

121876128
LN9490B14: RNCC: 2 | RNVC: 2
LN9490-B14: RNCC: 5 | RNVC: 9

21 Apr 1981

5340-12-193-3996
Retaining Strap

121933996
P-295514-011: RNCC: 3 | RNVC: 2
P295514-011: RNCC: 5 | RNVC: 2

19 Jul 1982

5340-12-178-8117
Mounting Bracket

121788117
2300109-000100.005.0: RNCC: 2 | RNVC: 2
2300109-000100.005.0: RNCC: 3 | RNVC: 2
2300109-000100-005-0: RNCC: 5 | RNVC: 2
5562490-3: RNCC: 5 | RNVC: 2
5562490/3: RNCC: 5 | RNVC: 2
2300109-000100.005.0: RNCC: 5 | RNVC: 9
2300109-000100-005-0: RNCC: 5 | RNVC: 9

18 May 1979

5340-12-701-3910
Loop Clamp

127013910
VG95211-ML-127013910: RNCC: 2 | RNVC: 2
5.12.5311.1000.23: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-372-0153
Mounting Bracket

123720153
SK739-181470.000.0: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-12-348-9118
Lock-Release Lever

123489118
B3500-208-5: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-329-0581
Friction Catch Stud

123290581
2350-010200.025.0: RNCC: 2 | RNVC: 2
2350-010200.025.0: RNCC: 3 | RNVC: 2

15 Jul 1992

5340-12-373-9021
Retaining Bail

123739021
000.752.0049: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-12-305-3808
Elbow Catch

123053808
69001-891: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-12-042-1160

5340-12-382-1628
Mounting Bracket

123821628
5230780241: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-307-2394
Electrical-Mechanical Equipment Post

123072394
6063802: RNCC: 3 | RNVC: 2

23 May 1986

5340-12-382-6998
Handle Grip

123826998
0542324: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-382-6824
Pipe Hanger

123826824
806280573: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-326-5681
Runner

123265681
8400.0160: RNCC: 3 | RNVC: 2

8 Oct 1991

5340-12-163-5662
Loop Clamp

121635662
LN9490BM16: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-306-0134
Angle Bracket

123060134
2602501: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-182-9847
Compression Cup

121829847
211611637A: RNCC: 3 | RNVC: 2

11 Mar 1980

5340-12-366-9841
Mounting Bracket

123669841
T881M4032205: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-133-4041

5340-12-168-3016
Loop Clamp

121683016
LN9491B6: RNCC: 2 | RNVC: 2

7 Mar 1977

5340-12-315-1873
Mounting Bracket

123151873
6202420801: RNCC: 3 | RNVC: 2
620 242 08 01: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-352-6777
Mounting Bracket

123526777
5400051-713101.00: RNCC: 2 | RNVC: 2
5400051-713101.00: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-181-0522
Mending Plate

121810522
3313250105: RNCC: 3 | RNVC: 2
3313250105: RNCC: 5 | RNVC: 9

22 Oct 1979

5340-12-173-7908
Angle Bracket

121737908
PAN5315A: RNCC: 3 | RNVC: 2

16 May 1978

5340-12-196-2375
Nonmetallic Bumper

121962375
1420026001: RNCC: 3 | RNVC: 2

15 Jun 1983

5340-12-351-0459
Angle Bracket

123510459
183001701: RNCC: 2 | RNVC: 2
183001701: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-349-8610
Angle Bracket

123498610
T290M2076101: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-12-351-5935
Section Block Clamp

123515935
7802494361: RNCC: 3 | RNVC: 2
78024 94361: RNCC: 5 | RNVC: 9

7 Aug 2000

5340-12-374-7479
Retaining Strap

123747479
W00146: RNCC: 3 | RNVC: 2
00146: RNCC: 5 | RNVC: 2

13 Mar 2008

5340-12-374-7381
Spring Loaded Cylinder Fastener

123747381
03090-4105: RNCC: 3 | RNVC: 2

12 Mar 2008

5340-12-363-6486
Manual Control Lever

123636486
4607430072: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-12-011-6099

5340-12-356-0512
Mounting Bracket

123560512
2103010340: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-373-6958
Double Angle Bracket

123736958
50227610: RNCC: 2 | RNVC: 2
50227610: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-12-131-5620

5340-12-347-7080
Mounting Bracket

123477080
300.009.406: RNCC: 2 | RNVC: 2
300.009.406: RNCC: 3 | RNVC: 2
300.009 406: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-12-198-2427
Mending Plate

121982427
66.3851.521.04-A001: RNCC: 3 | RNVC: 2
161783: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-352-4162
Mounting Bracket

123524162
T251M4008101: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-12-327-0796
Manual Control Handle

123270796
6321918: RNCC: 3 | RNVC: 2
1127832: RNCC: 5 | RNVC: 2

28 Nov 1991

5340-12-300-5637
Resilient Mount

123005637
811199415A: RNCC: 3 | RNVC: 2
823199415B: RNCC: 5 | RNVC: 9

15 Aug 1984

5340-12-305-5672
Angle Bracket

123055672
4064270241: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-373-1677
Retaining Strap

123731677
4633230840: RNCC: 3 | RNVC: 2

5 Oct 2007

5340-12-168-3015
Loop Clamp

121683015
LN9491BM35: RNCC: 2 | RNVC: 2

7 Mar 1977

5340-12-360-3509
Angle Bracket

123603509
0009317184: RNCC: 3 | RNVC: 2
0009317184: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-372-3971
Angle Bracket

123723971
1000287-208000.01: RNCC: 2 | RNVC: 2
1000287-208000.01: RNCC: 3 | RNVC: 2

13 Jul 2007

5340-12-150-7251
Spannschlosz

5340-12-305-6258
Spring Tension Clip

123056258
N02.670.1: RNCC: 3 | RNVC: 2
0059887078: RNCC: 5 | RNVC: 2

28 Nov 1985

5340-12-149-8912
Griffstueck

5340-12-150-3521
Verbindungs Platte

5340-12-150-7224
Spannschlosz

5340-12-150-9429
Verbindungs Platte

5340-12-370-6216
Expansion Plug

123706216
0630 361 028: RNCC: 3 | RNVC: 2
15DIN443, FE/ZNPHR8F: RNCC: 5 | RNVC: 2

30 Nov 2006

5340-12-130-9555
Loop Clamp

121309555
DIN3016-2-G1-80X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-80X12-W1-2: RNCC: 3 | RNVC: 2
SP80/12SKZ: RNCC: 3 | RNVC: 2
SP80-12SK: RNCC: 5 | RNVC: 2
1310005080: RNCC: 5 | RNVC: 2
SP80-12X0-7SKN288A: RNCC: 5 | RNVC: 2
DIN3016-G1-80X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-G80X12-W1: RNCC: 5 | RNVC: 9
VG95931G80X12W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-5862
Angle Bracket

121975862
A-230129-189: RNCC: 3 | RNVC: 2
A230129-189: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-164-4458
Retaining Strap

121644458
2360-220050.19.0: RNCC: 2 | RNVC: 2
251133281000: RNCC: 3 | RNVC: 2
251133281000: RNCC: 5 | RNVC: 2
2360-220050.19.0: RNCC: 5 | RNVC: 2
2360-220050.19.0: RNCC: 5 | RNVC: 2
2360-220050-19-0: RNCC: 5 | RNVC: 9
2360-220050.19.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-703-3081
Mending Plate

127033081
VG95211-ML-127033081: RNCC: 2 | RNVC: 2
5.12.2210.1610.91: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-137-4175
Snap Hook

121374175
BSAM006: RNCC: 3 | RNVC: 2
DSBI002: RNCC: 5 | RNVC: 9
K6570: RNCC: 5 | RNVC: 9
KBMSH40: RNCC: 5 | RNVC: 9
226S-80X8MR-BW258GE-35X7-FE/ZN8: RNCC: 5 | RNVC: 9
231.0.21.3110.03: RNCC: 5 | RNVC: 9
Y226S-80X8MR-BW258GE-35X7-FE/ZN8: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-185-1944
Butt Hinge Leaf

121851944
2300109-180038.000.0: RNCC: 2 | RNVC: 2
2300109-180038.000.0: RNCC: 3 | RNVC: 2
2300109-180038.600.0: RNCC: 5 | RNVC: 2
2300109-180038-000-0: RNCC: 5 | RNVC: 9
2300109-180038.000.0: RNCC: 5 | RNVC: 9
2300109-180038-600-0: RNCC: 5 | RNVC: 9
2300109-180038-600-0: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-149-9097
Resilient Mount

121499097
DIN95369-A4-2-CR-ST: RNCC: 2 | RNVC: 2
151007-M12-CR.ST-50: RNCC: 5 | RNVC: 2
60-201-040: RNCC: 5 | RNVC: 2
C2040G: RNCC: 5 | RNVC: 2
VG95369-A4-2-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-7318
Gummi- Riemen

123147318
T10096: RNCC: 3 | RNVC: 2
T12901: RNCC: 5 | RNVC: 2
T10096: RNCC: 5 | RNVC: 9

3 Aug 1988

5340-12-338-8020
Angle Bracket

123388020
6700017-203300.05: RNCC: 2 | RNVC: 2
6700017-203300.05: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-361-4924
Mounting Bracket

123614924
1504797: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-339-0504
Butt Hinge

123390504
4637400137: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-310-6699
Dust And Moisture Seal Protective Plug

123106699
13826011: RNCC: 3 | RNVC: 2
007165935: RNCC: 5 | RNVC: 2
008121161: RNCC: 5 | RNVC: 2
7165935: RNCC: 5 | RNVC: 2

12 Jun 1987

5340-12-371-8190
Dust And Moisture Seal Protective Cap

123718190
1610508027: RNCC: 3 | RNVC: 2

21 May 2007

5340-12-192-1248
Access Cover

121921248
15800-01: RNCC: 3 | RNVC: 2

24 Mar 1982

5340-12-317-8206
Mounting Bracket

123178206
PM60273B-001: RNCC: 3 | RNVC: 2

17 May 1989

5340-12-313-3397
Rod End Connector

123133397
4200081-151823.000: RNCC: 3 | RNVC: 2
9822616: RNCC: 5 | RNVC: 2
9822616: RNCC: 5 | RNVC: 9
4200081-151823.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-174-7847
Angle Bracket

121747847
04455279: RNCC: 3 | RNVC: 2
04455281: RNCC: 5 | RNVC: 2
4455279EZ5004-26: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-337-1759
Dust And Moisture Seal Protective Plug

123371759
11.49055-0079: RNCC: 3 | RNVC: 2
11.49055-0079: RNCC: 5 | RNVC: 2
11490550079: RNCC: 5 | RNVC: 2
F11.49055-0079: RNCC: 5 | RNVC: 2

27 Jan 1995

5340-12-145-4886
Resilient Mount

121454886
845-38467.NR70.ST: RNCC: 3 | RNVC: 2
38467BSTN7090: RNCC: 3 | RNVC: 2
1012666000: RNCC: 3 | RNVC: 2
BQ6.01/27N: RNCC: 3 | RNVC: 9
70000004500912: RNCC: 5 | RNVC: 2
A38467,NR70ST: RNCC: 5 | RNVC: 2
38467SM700: RNCC: 5 | RNVC: 9
SES4-61062SM700: RNCC: 5 | RNVC: 9
SES4/61062SM700: RNCC: 5 | RNVC: 9
4500912: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-4369
Angle Bracket

123104369
5801758-0300.07: RNCC: 2 | RNVC: 2
5801758-0300.07: RNCC: 3 | RNVC: 2

22 May 1987

5340-12-162-7825
Butt Hinge

121627825
1918-121501.004: RNCC: 2 | RNVC: 2
1918-121501.004: RNCC: 3 | RNVC: 2
1918-121501-004: RNCC: 3 | RNVC: 2
1918-121501-004: RNCC: 5 | RNVC: 9
1918-121501.004: RNCC: 5 | RNVC: 9
1918-121501.004: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-2181
Webbing Strap

121782181
T11799: RNCC: 3 | RNVC: 2
T11799: RNCC: 5 | RNVC: 9

9 Apr 1979

5340-12-320-1331
Kunst Gleitschiene

123201331
0679501: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-194-1405
Manual Control Handle

121941405
A540483: RNCC: 3 | RNVC: 2

6 Oct 1982

5340-12-183-8965
Nut And Bolt Locking Plate

121838965
6005 300 170: RNCC: 3 | RNVC: 2
2964078EY8751-53: RNCC: 5 | RNVC: 2
02964078: RNCC: 5 | RNVC: 2
6005300170: RNCC: 5 | RNVC: 2
100CP1396: RNCC: 5 | RNVC: 2
6005300170: RNCC: 5 | RNVC: 9
2964078EY8751-53: RNCC: 5 | RNVC: 9
02964078: RNCC: 5 | RNVC: 9

29 May 1980

5340-12-337-9333
Angle Bracket

123379333
461 843 07 12: RNCC: 3 | RNVC: 2
4618430712: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-313-8667
Angle Bracket

123138667
4245450040: RNCC: 3 | RNVC: 2
424 545 00 40: RNCC: 5 | RNVC: 2

14 May 1988

Load More Results