What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 74 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 74 of 178

5340-12-195-5412
Resilient Mount

121955412
251407175: RNCC: 3 | RNVC: 9

9 Mar 1983

5340-12-384-1415
Hand Crank

123841415
13.10.66: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-12-042-1631

5340-12-365-4923
Manual Control Lever

123654923
4638330125: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-12-158-6849

5340-12-320-4399
Dust And Moisture Seal Protective Plug

123204399
620U13B: RNCC: 3 | RNVC: 2
620U13B: RNCC: 5 | RNVC: 2
GPN620U13B: RNCC: 5 | RNVC: 2
9560163300: RNCC: 5 | RNVC: 2
GPN620,U13B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-359-0585
Dust And Moisture Seal Protective Cap

123590585
0015457383: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-356-0053
Angle Bracket

123560053
4636160112: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-353-5430
Section Block Clamp

123535430
JN0413GG46: RNCC: 3 | RNVC: 2

5 Apr 2001

5340-12-324-6437
Webbing Strap

123246437
54.0024.407.00: RNCC: 2 | RNVC: 2
54.0024.407.00: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-346-7507
Loop Clamp

123467507
81953126017: RNCC: 3 | RNVC: 2
044 460 001 018: RNCC: 5 | RNVC: 2

7 Sep 1998

5340-12-348-7166
Access Cover

123487166
2972.701.54-5.4-1/2: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-12-344-0507
Mounting Bracket

123440507
2996.73.33: RNCC: 3 | RNVC: 2
2996.7333: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-307-2453
Angle Bracket

123072453
RP988842: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-365-1304
Mounting Bracket

123651304
536519-0030.000: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-350-9951
Access Cover

123509951
3060-00-318200.15: RNCC: 3 | RNVC: 2

15 Jun 2000

5340-12-011-4848

5340-12-328-6753
Plug Button

123286753
893955205: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-328-9396
Spring Loaded Cylinder Fastener

123289396
8340: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-199-1357
Electrical-Mechanical Equipment Post

121991357
42001577: RNCC: 3 | RNVC: 2

28 Mar 1984

5340-12-331-9495
Resilient Mount

123319495
88962100011: RNCC: 3 | RNVC: 2
88.96210.0011: RNCC: 5 | RNVC: 2
88.96210.0011: RNCC: 5 | RNVC: 2

8 Jul 1993

5340-12-308-6028
Rod End Clevis

123086028
7165601: RNCC: 3 | RNVC: 2

28 Oct 1986

5340-12-330-2541
Protection Bellows

123302541
53 227 005: RNCC: 3 | RNVC: 2
53227005: RNCC: 5 | RNVC: 2

21 Nov 1992

5340-12-198-8868
Angle Bracket

121988868
8372037140: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-352-2292
Double Angle Bracket

123522292
5060981539: RNCC: 3 | RNVC: 2
506 098 15 39: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-130-9821
Retaining Strap

121309821
A5N285B: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-6567
Mounting Bracket

127016567
VG95211-ML-127016567: RNCC: 2 | RNVC: 2
5.12.7208.8006.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-335-4061
Mounting Bracket

123354061
073-373011-000-0: RNCC: 2 | RNVC: 2
073-373011-000-0: RNCC: 3 | RNVC: 2

17 Aug 1994

5340-12-181-1067
Pawl Fastener

121811067
81626806062: RNCC: 3 | RNVC: 2
21-029-500-3: RNCC: 5 | RNVC: 2

24 Oct 1979

5340-12-362-6436
Mounting Plate

123626436
2500309-195150.000.0: RNCC: 3 | RNVC: 2

13 Mar 2004

5340-12-346-6907
Plug Button

123466907
000-962-01-14: RNCC: 3 | RNVC: 2
000-962-01-14: RNCC: 5 | RNVC: 2

26 Aug 1998

5340-12-169-6730
Dust And Moisture Seal Protective Cap

121696730
116-068: RNCC: 3 | RNVC: 2
2303-0000-0301: RNCC: 5 | RNVC: 2

3 Jun 1977

5340-12-178-9248
Dust And Moisture Seal Protective Cap-Plug

121789248
431271225950: RNCC: 3 | RNVC: 2
5801796-120000.15: RNCC: 5 | RNVC: 9
5801796-120000-15: RNCC: 5 | RNVC: 9

25 May 1979

5340-12-185-9155
Helical Compression Spring Seat

121859155
472A0304-01: RNCC: 3 | RNVC: 2

8 Nov 1980

5340-12-190-2413
Mending Plate

121902413
4675989: RNCC: 3 | RNVC: 2
467.5989: RNCC: 5 | RNVC: 2
5801443-150000.001: RNCC: 5 | RNVC: 9
5801443-150000-001: RNCC: 5 | RNVC: 9

16 Nov 1981

5340-12-145-3372
Retaining Strap

121453372
X11-11J18: RNCC: 3 | RNVC: 2
10300217: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-8855
Mounting Bracket

123928855
9266681000: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-300-9869
Angle Bracket

123009869
5801924-3000.01: RNCC: 2 | RNVC: 2
7802077301: RNCC: 3 | RNVC: 2
78020 77301: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-197-4183
Electrical-Mechanical Equipment Post

121974183
20-11-78-16: RNCC: 3 | RNVC: 2

20 Oct 1983

5340-12-326-1822
Access Door

123261822
6100131-110400: RNCC: 2 | RNVC: 2

15 Aug 1991

5340-12-168-6351
Angle Bracket

121686351
23307-209412.00.0: RNCC: 2 | RNVC: 2
23307-209412-00-0: RNCC: 5 | RNVC: 2
23307-209412-00-0: RNCC: 5 | RNVC: 9

25 Mar 1977

5340-12-329-6266
Mounting Plate

123296266
1361235-16060-00: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-12-344-5901
Butt Hinge Leaf

123445901
J5282006-401: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-381-2945
Mounting Plate

123812945
424-12-SIB1: RNCC: 3 | RNVC: 2
4250473101148: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-156-2888
Leather Strap

121562888
25704-192340.01.0: RNCC: 2 | RNVC: 2
25704-192340.01.0: RNCC: 3 | RNVC: 2
25704-192340.01.0: RNCC: 5 | RNVC: 2
25704-192340-01-0: RNCC: 5 | RNVC: 2
25704-192340-01-0: RNCC: 5 | RNVC: 9
25704-192340.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-364-2867
Angle Bracket

123642867
5374-123120A02B: RNCC: 2 | RNVC: 2
5374-123120A02B: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-320-6335
Runner

123206335
5802017-000000.24: RNCC: 2 | RNVC: 2
5802017-000000.24: RNCC: 3 | RNVC: 2

2 Feb 1990

5340-12-354-5384
Rigid Caster

123545384
LK-STARU-BS100RO: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-188-7933
Detent Plunger

121887933
450900-6915: RNCC: 3 | RNVC: 2

29 Jul 1981

5340-12-376-1460
Lock Key Set

123761460
350203.913.00: RNCC: 3 | RNVC: 2

19 Aug 2008

5340-12-170-3817
Helical Compression Spring Retainer

121703817
E20347: RNCC: 3 | RNVC: 2

8 Jul 1977

5340-12-303-6730
Angle Bracket

123036730
52.0261.050.01: RNCC: 3 | RNVC: 2

22 Apr 1985

5340-12-167-2618
Dust And Moisture Seal Protective Cap

121672618
113415835: RNCC: 3 | RNVC: 9

7 Dec 1976

5340-12-158-5345
Nut And Bolt Locking Plate

121585345
01400224: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-191-1125
Spring Tension Clip

121911125
02480410: RNCC: 3 | RNVC: 2
2480410EE5052-81: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-334-4067
Lock Key

123344067
052903: RNCC: 3 | RNVC: 9
29793 SCHLUESSEL: RNCC: 5 | RNVC: 9
SUW MODELL 100 SCHLUESSEL: RNCC: 5 | RNVC: 9

4 May 1994

5340-12-392-0074
Runner

123920074
109048-40140: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-310-8746
Resilient Mount

123108746
741027HART: RNCC: 3 | RNVC: 2
741027HART: RNCC: 3 | RNVC: 2

3 Jul 1987

5340-12-365-2301
Access Cover

123652301
2500075-560560.001.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-359-6843
Angle Bracket

123596843
2500261-850420.000.0: RNCC: 2 | RNVC: 2
2500261-850420.000.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-175-6992
Catch Strike

121756992
WW 419 770 A: RNCC: 2 | RNVC: 2
WW 419 770 A: RNCC: 3 | RNVC: 9
WW 419 770 A: RNCC: 5 | RNVC: 2
WW419770: RNCC: 5 | RNVC: 2
WW 419 770: RNCC: 5 | RNVC: 9
WW419770: RNCC: 5 | RNVC: 9
WW 419 770: RNCC: 5 | RNVC: 9
WW 419 770: RNCC: 5 | RNVC: 9

11 Oct 1978

5340-12-364-5437
Mounting Bracket

123645437
01.130.783.0: RNCC: 3 | RNVC: 2

8 Oct 2004

5340-12-176-5308
Mounting Plate

121765308
WW 407 982 C: RNCC: 3 | RNVC: 9
WW 407 982 C: RNCC: 5 | RNVC: 2
WW407982C: RNCC: 5 | RNVC: 2
WW407982C: RNCC: 5 | RNVC: 9

5 Dec 1978

5340-12-346-7603
Mounting Bracket

123467603
CF 344 240 A: RNCC: 2 | RNVC: 2
CF 344 240 A: RNCC: 3 | RNVC: 2

8 Sep 1998

5340-12-346-3273
Runner

123463273
3651440: RNCC: 3 | RNVC: 2

10 Jul 1998

5340-12-122-5793
Retaining Strap

121225793
4049950420: RNCC: 3 | RNVC: 2
012010163300: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-363-7924
Mounting Plate

123637924
9068404000: RNCC: 3 | RNVC: 2
81423900008: RNCC: 5 | RNVC: 2

24 Jul 2004

5340-12-040-1016

5340-12-094-0847

5340-12-358-0083
Swivel Caster

123580083
LKE-SE 100K: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-301-3296
Mending Plate

123013296
1423-910.66(5): RNCC: 3 | RNVC: 2

6 Oct 1984

5340-12-180-9542
Escutcheon Plate

121809542
3097230195: RNCC: 3 | RNVC: 2

12 Oct 1979

5340-12-362-8520
Angle Bracket

123628520
51-76807: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-337-8535
Retaining Strap

123378535
61782: RNCC: 3 | RNVC: 2
61782-09.12.82: RNCC: 5 | RNVC: 2
61782-635: RNCC: 5 | RNVC: 9

24 Apr 1995

5340-12-151-8136
Retaining Strap

121518136
BD7001E83: RNCC: 3 | RNVC: 9
BD7001E083: RNCC: 5 | RNVC: 2
1292001-001905-083: RNCC: 5 | RNVC: 9
BD7001E083: RNCC: 5 | RNVC: 9
1292001-001905.083: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-182-9714
Webbing Strap

121829714
5801697-12200.00: RNCC: 2 | RNVC: 2
5801697-12200-00: RNCC: 5 | RNVC: 2
5801697-12200.00: RNCC: 5 | RNVC: 9
5801697-12200.00: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-367-4751
Mechanical Stop

123674751
09404042: RNCC: 3 | RNVC: 2
LET00091/1: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-12-312-6689
Butt Hinge

123126689
3080-0200-31-00: RNCC: 3 | RNVC: 2
308-0200-31-00: RNCC: 5 | RNVC: 2

26 Jan 1988

5340-12-381-3285
Spacing Threaded Standoff

123813285
81910200769: RNCC: 3 | RNVC: 2
81.91020.0769: RNCC: 5 | RNVC: 2
81.91020-0769: RNCC: 5 | RNVC: 2

3 Feb 2010

5340-12-337-0006
Access Cover

123370006
2300125-183100.008.0: RNCC: 2 | RNVC: 2
2300125-183100.008.0: RNCC: 3 | RNVC: 2
2300125-183100.008.0: RNCC: 5 | RNVC: 2

9 Jan 1995

5340-12-391-4151
Bail Handle

123914151
29-1000-0068: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-12-176-3253
Loop Clamp

121763253
PAN4263-63: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-317-7114
Dust And Moisture Seal Protective Plug

123177114
20744: RNCC: 3 | RNVC: 2
S10I: RNCC: 5 | RNVC: 2
WFGS10I: RNCC: 5 | RNVC: 2

3 May 1989

5340-12-367-6857
Dust And Moisture Seal Boot

123676857
05043601: RNCC: 3 | RNVC: 2

26 Sep 2005

5340-12-371-2467
Eye Hook

123712467
33.0835.00: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-12-318-3835
Spring Tension Clip

123183835
706312-8001.000: RNCC: 3 | RNVC: 2

10 Jul 1989

5340-12-360-1284
Cushioning Pad

123601284
9418990091: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-302-2507
Dust And Moisture Seal Protective Cap

123022507
782303125: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-319-2614
Mounting Plate

123192614
107672: RNCC: 3 | RNVC: 2
107723: RNCC: 5 | RNVC: 2

15 Sep 1989

5340-12-302-1238
Pad Eye

123021238
HSML: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-302-2576
Resilient Mount

123022576
6205040112: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-371-6229
Dust And Moisture Seal Protective Cap

123716229
2136235: RNCC: 3 | RNVC: 2
7KK215: RNCC: 5 | RNVC: 2

26 Apr 2007

5340-12-339-0304
Mounting Bracket

123390304
11.41.020.00: RNCC: 3 | RNVC: 2
0008630324: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-12-386-7639
Block Clamp

123867639
SK3361947: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-303-5783
Retaining Strap

123035783
52.0261.600.02: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-316-6452
Pad Eye

123166452
5186309: RNCC: 3 | RNVC: 2

31 Jan 1989

5340-12-316-0515
Spring Loaded Cylinder Fastener

123160515
BK7021: RNCC: 3 | RNVC: 2
133450: RNCC: 3 | RNVC: 2
1003.00.01.08.00: RNCC: 5 | RNVC: 2
887 200 6Y4: RNCC: 5 | RNVC: 2
BK7021: RNCC: 5 | RNVC: 9

17 Dec 1988

5340-12-303-2335
Mending Plate

123032335
4357437111: RNCC: 3 | RNVC: 2

7 Mar 1985

5340-12-386-4159
Nut And Bolt Locking Plate

123864159
X52314100019: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-310-2802
Mending Plate

123102802
1000104-212400.03: RNCC: 3 | RNVC: 2
1000104-212400.03: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-318-2348
Rigid Caster

123182348
510252-8343.000: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-12-393-5552
Retaining Band

123935552
HRSGBLPU30S1295ST: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-319-6831
Folding Stay

123196831
2300035-230513: RNCC: 2 | RNVC: 2

25 Oct 1989

5340-12-319-3613
Shimmy Damper

123193613
4085710: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-149-0895
Mending Plate

121490895
121G08015: RNCC: 3 | RNVC: 2
8200981639: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-042-2490

5340-12-042-6393

5340-12-308-8148
Angle Bracket

123088148
8391753141: RNCC: 3 | RNVC: 2

18 Nov 1986

5340-12-379-8795
Coat And Hat Hook

123798795
32121319: RNCC: 3 | RNVC: 2
CV169047: RNCC: 5 | RNVC: 2
32121319: RNCC: 5 | RNVC: 2

9 Sep 2009

5340-12-164-3721
Angle Bracket

121643721
4030980239: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-094-0991

5340-12-392-8853
Spring Holder

123928853
L131M0001220: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-352-2258
Mounting Plate

123522258
5062030840: RNCC: 3 | RNVC: 2
506 203 08 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-328-9520
Webbing Strap

123289520
2653-971126.00: RNCC: 2 | RNVC: 2
2653-971126.00: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-359-0453
Mounting Bracket

123590453
6552093213: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-366-4800
Friction Catch Housing

123664800
2 0009-568: RNCC: 3 | RNVC: 2
2 0009-568: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-12-329-4697
Rim Lock

123294697
0.25.0103.3: RNCC: 3 | RNVC: 2
0.25.103.3 TYP1: RNCC: 5 | RNVC: 2

21 Aug 1992

5340-12-194-5680
Retaining Strap

121945680
LN29836 A 20: RNCC: 2 | RNVC: 2
LN29836A20: RNCC: 5 | RNVC: 2

18 Nov 1982

5340-12-346-4208
Mounting Bracket

123464208
2300348-970400.078.0: RNCC: 2 | RNVC: 2
2300348-970400.078.0: RNCC: 3 | RNVC: 2
1808581: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-324-4526
Mounting Bracket

123244526
VY906564-1: RNCC: 3 | RNVC: 2
VY3.068-1: RNCC: 5 | RNVC: 2

18 Feb 1991

5340-12-350-5934
Runner

123505934
54.1038.130.13: RNCC: 2 | RNVC: 2
54.1038.130.13: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-356-1238
Mounting Bracket

123561238
2339-402100A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-314-5233
Angle Bracket

123145233
CF 445 781 A: RNCC: 2 | RNVC: 2
CF 445 781 A: RNCC: 3 | RNVC: 2
CF 445 781 A: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-335-2008
Dust And Moisture Seal Boot

123352008
1480284055: RNCC: 3 | RNVC: 2
1 480 284 055: RNCC: 5 | RNVC: 2
1480284055: RNCC: 5 | RNVC: 2
5001829001: RNCC: 5 | RNVC: 2
1480284055: RNCC: 5 | RNVC: 9

26 Jul 1994

5340-12-347-8963
Hand Crank

123478963
4202.0,5.10.00: RNCC: 3 | RNVC: 2

8 Mar 1999

5340-12-336-5395
Extension Drawer Slide

123365395
2233.371: RNCC: 3 | RNVC: 2
75 D 5.030.002: RNCC: 5 | RNVC: 2
2233371: RNCC: 5 | RNVC: 2

24 Nov 1994

5340-12-311-6734
Nonmetallic Bumper

123116734
6030087: RNCC: 3 | RNVC: 2
704225377: RNCC: 5 | RNVC: 2
U401800836: RNCC: 5 | RNVC: 2

5 Oct 1987

5340-12-358-6031
Mounting Bracket

123586031
82.0032.15: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-358-7971
Helical Compression Spring Retainer

123587971
14.70.23: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-042-0328

5340-12-194-2088
Electrical-Mechanical Equipment Post

121942088
RP969403: RNCC: 3 | RNVC: 2

12 Oct 1982

5340-12-195-1625
Retaining Strap

121951625
BSS26X25X3: RNCC: 3 | RNVC: 2
15300000026: RNCC: 5 | RNVC: 2
5300000026: RNCC: 5 | RNVC: 2

19 Jan 1983

5340-12-199-3000
Pipe Bracket

121993000
3097301: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-12-127-8035

5340-12-126-5163

5340-12-184-4002
Hinge Torsion Bar

121844002
2171-1222-000: RNCC: 3 | RNVC: 2
2171-1222-000: RNCC: 5 | RNVC: 9

22 Jul 1980

5340-12-305-8839
Butt Hinge Leaf

123058839
127-01/72628: RNCC: 3 | RNVC: 2
127-01/72628: RNCC: 5 | RNVC: 9

2 Jan 1986

5340-12-349-7653
Nonmetallic Bumper

123497653
U60.232000.03-00: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-356-5092
Access Cover

123565092
J94330069-001: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-370-8974
Mounting Bracket

123708974
81155020079: RNCC: 3 | RNVC: 2
81.15502-0079: RNCC: 5 | RNVC: 2
81.15502.0079: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-12-317-5338
Mounting Bracket

123175338
320-992112: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-12-361-4198
Buckle

123614198
2056-712: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-343-4838
Retaining Strap

123434838
DMAF004: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-12-311-8945
Escutcheon Plate

123118945
81970010283: RNCC: 3 | RNVC: 2
81.97001.0283: RNCC: 5 | RNVC: 2

27 Oct 1987

5340-12-302-1508
Spring Tension Clip

123021508
183871543: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-025-3150

5340-12-356-7033
Rod Retainer Clip

123567033
160-24943-23: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-315-1177
Angle Bracket

123151177
C249-A33-C8: RNCC: 2 | RNVC: 2
C249-A33-C8: RNCC: 3 | RNVC: 2

17 Sep 1988

5340-12-328-5912
Lock-Release Lever

123285912
2300354-829912: RNCC: 2 | RNVC: 2
07655-960010-00: RNCC: 5 | RNVC: 9

4 Jun 1992

5340-12-385-8563
Permanent Magnet

123858563
SAV 240.13-MH13-19: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-12-334-9208
Nonmetallic Bumper

123349208
4900347-200500.03: RNCC: 2 | RNVC: 2
4900347-200500.03: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-12-355-3849
Retaining Strap

123553849
DIN72571-1X8-1.4301: RNCC: 2 | RNVC: 2

9 Nov 2001

5340-12-151-6134
Eye Hook

121516134
03555456: RNCC: 3 | RNVC: 2
3555456EZ5023-06: RNCC: 5 | RNVC: 2
5177-02-05.31: RNCC: 5 | RNVC: 2
5177-02-05-31: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-335-0742
Catch Strike

123350742
0048-200000A11B: RNCC: 2 | RNVC: 2
0048-200000A11B: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-12-316-6905
Angle Bracket

123166905
51-51703: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-307-8527
Electronic Equipment Hardware Kit

123078527
CF 807 477 AE: RNCC: 2 | RNVC: 2
CF 807 477 AE: RNCC: 3 | RNVC: 2
CF 807 477 AE: RNCC: 3 | RNVC: 2

1 Aug 1986

5340-12-305-5094
Friction Catch

123055094
6030084: RNCC: 3 | RNVC: 2
023835: RNCC: 5 | RNVC: 2

15 Nov 1985

5340-12-172-8139
Loop Clamp

121728139
LN9490BK8: RNCC: 2 | RNVC: 2
LN9490BR8: RNCC: 5 | RNVC: 2

22 Feb 1978

5340-12-040-0919

5340-12-181-4845
Access Cover

121814845
2300033-306400.02: RNCC: 2 | RNVC: 2
2300033-306400-02: RNCC: 5 | RNVC: 9
2300033-306400-02: RNCC: 5 | RNVC: 9
2300033-306400.02: RNCC: 5 | RNVC: 9

26 Nov 1979

5340-12-179-2326
Platte

121792326
5800828-1331-003: RNCC: 3 | RNVC: 2
5800828-1331.003: RNCC: 5 | RNVC: 2

18 Jun 1979

5340-12-319-1577
Catch Strike

123191577
2654-332300.05: RNCC: 2 | RNVC: 2
2654-332300.05: RNCC: 3 | RNVC: 2
2654-332 300.05: RNCC: 5 | RNVC: 9
679-02000000.09: RNCC: 5 | RNVC: 9
679-02000000.09: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-384-8264
Mounting Plate

123848264
F1.1643-00-01-30.10-00: RNCC: 3 | RNVC: 2

1 Apr 2011

5340-12-311-2717
Mending Plate

123112717
1304985: RNCC: 3 | RNVC: 2
4300.165.00.00.044: RNCC: 5 | RNVC: 2
4300.165.00/44: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-313-2142
Access Cover

123132142
615.42-04-00-00-000: RNCC: 3 | RNVC: 2

11 Mar 1988

5340-12-335-0508
Angle Bracket

123350508
0048-204000A05B: RNCC: 2 | RNVC: 2
0048-204000A05B: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-381-8439
Dust And Moisture Seal Protective Cap

123818439
8605001543000: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-12-377-1237
Loop Clamp

123771237
41201881: RNCC: 3 | RNVC: 2
41201881EZ50-7135: RNCC: 5 | RNVC: 2
CV160402: RNCC: 5 | RNVC: 2
41201881: RNCC: 5 | RNVC: 2

12 Dec 2008

5340-12-044-3481

5340-12-358-0742
Access Cover

123580742
2300388-250430.000: RNCC: 2 | RNVC: 2
2300388-250430.000: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-163-9611
Compression Cup

121639611
RM074-37: RNCC: 3 | RNVC: 2
DR6-06-03: RNCC: 5 | RNVC: 2
RM074-37-603: RNCC: 5 | RNVC: 2
RM074-37: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-9881
Resilient Mount

123319881
DIN95363-B30X30-M8X15-NR55ST: RNCC: 2 | RNVC: 2
510027-M8X15.NR55.ST: RNCC: 5 | RNVC: 2
2500.045: RNCC: 5 | RNVC: 2
920380: RNCC: 5 | RNVC: 2
FT 2500.045: RNCC: 5 | RNVC: 2
VG95363-B30X30-M8X15-NR55ST: RNCC: 5 | RNVC: 9

13 Jul 1993

5340-12-197-5422
Helical Compression Spring Retainer

121975422
1000042-114800.01: RNCC: 3 | RNVC: 2
1000042-114800-01: RNCC: 5 | RNVC: 2

31 Oct 1983

5340-12-183-9957
Strap Hinge

121839957
5800166-21-04: RNCC: 3 | RNVC: 2
5800166-21-04: RNCC: 5 | RNVC: 9

10 Jun 1980

5340-12-306-6838
Lock-Release Lever

123066838
23114-0406.00: RNCC: 2 | RNVC: 2
23114-0406.00: RNCC: 3 | RNVC: 2
23114-0406.00: RNCC: 5 | RNVC: 9
9854955: RNCC: 5 | RNVC: 9

20 Mar 1986

5340-12-331-1851
Catch Strike

123311851
226.57.709: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-12-095-0163

5340-12-369-6475
Manual Control Lever

123696475
64065: RNCC: 3 | RNVC: 2

4 Aug 2006

5340-12-022-7560

5340-12-304-7826
Nonmetallic Bumper

123047826
0263030000: RNCC: 3 | RNVC: 2
S000263030000000: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-349-2411
Dust And Moisture Seal Protective Cap

123492411
A1Z10280313: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-12-320-9940
Helical Compression Spring Seat

123209940
2440220002: RNCC: 3 | RNVC: 2
0132 0847: RNCC: 5 | RNVC: 2
93156918: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-12-360-1429
Dust And Moisture Seal Protective Plug

123601429
3032248: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-321-4666
Retaining Band

123214666
1416101: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-371-9178
Webbing Strap

123719178
200.0505.07.00.00: RNCC: 3 | RNVC: 2

30 May 2007

5340-12-190-3075
Turnbuckle

121903075
81971066003: RNCC: 3 | RNVC: 2
81.97106.6003: RNCC: 5 | RNVC: 2

19 Nov 1981

5340-12-352-5680
Spacing Threaded Standoff

123525680
BM313K: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-355-1538
Retaining Strap

123551538
1603295-8400: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-309-7915
Access Cover

123097915
6131615: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-163-7417
Loop Clamp

121637417
LN9491BM9: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-374-8795
Access Cover

123748795
154 0253-801: RNCC: 3 | RNVC: 2
154 0253-801: RNCC: 5 | RNVC: 2

2 Apr 2008

5340-12-367-2349
Mending Plate

123672349
0KG06101973002DA: RNCC: 3 | RNVC: 2
937546: RNCC: 5 | RNVC: 2

22 Jul 2005

5340-12-305-8219
Butt Hinge Leaf

123058219
LN9172AF: RNCC: 2 | RNVC: 2

18 Dec 1985

5340-12-304-9566
Angle Bracket

123049566
921 003 100 4: RNCC: 3 | RNVC: 2
1692889: RNCC: 5 | RNVC: 2
9210031004: RNCC: 5 | RNVC: 2
8461458: RNCC: 5 | RNVC: 2
9210031004: RNCC: 5 | RNVC: 2

10 Sep 1985

5340-12-197-0221
Nonmetallic Bumper

121970221
6481.001.4: RNCC: 3 | RNVC: 2

12 Sep 1983

5340-12-381-6819
Sliding Block

123816819
0.0.388.49: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-393-6522
Mounting Bracket

123936522
4100098-982460.001.0: RNCC: 2 | RNVC: 2
4100098-982460.001.0: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-12-305-2043
Loop Clamp

123052043
P209271900412606: RNCC: 3 | RNVC: 2

8 Oct 1985

5340-12-377-3630
Angle Bracket

123773630
8605001.3.545.00: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-330-7672
Runner

123307672
6600153-982152.001.0: RNCC: 2 | RNVC: 2
6600153-982152.001.0: RNCC: 3 | RNVC: 2

5 Feb 1993

5340-12-379-4687
Rim Lock

123794687
03.0797.531: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-12-324-3747
Resilient Mount

123243747
734001.NR55.ST: RNCC: 3 | RNVC: 2
27924BSKZ5590: RNCC: 3 | RNVC: 2
27924FI65: RNCC: 5 | RNVC: 2
27924SM550: RNCC: 5 | RNVC: 2
27924.NR55.ST: RNCC: 5 | RNVC: 2
130067-04040: RNCC: 5 | RNVC: 2
27924BSTN5590: RNCC: 5 | RNVC: 2
27924,NR55ST: RNCC: 5 | RNVC: 2
VG95365-A4-NR55ST: RNCC: 5 | RNVC: 9

8 Feb 1991

5340-12-305-1117
Angle Bracket

123051117
4900059-111220.003.0: RNCC: 3 | RNVC: 2
1223789: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-197-6746
Mending Plate

121976746
P-296874-055: RNCC: 3 | RNVC: 2
P296874-055: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-359-0943
Loop Clamp

123590943
DIN3016-1-D1-22X15-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Dec 2002

5340-12-335-6756
Access Door

123356756
073-290010-000-0: RNCC: 2 | RNVC: 2
073-290010-000-0: RNCC: 3 | RNVC: 2

12 Sep 1994

5340-12-192-0379
Resilient Mount

121920379
2300007-031500.02.0: RNCC: 2 | RNVC: 2
2300007-031500.02.0: RNCC: 5 | RNVC: 2
2300007-031500.02.0: RNCC: 5 | RNVC: 2
2300007-031500.02.0: RNCC: 5 | RNVC: 2
81600-2300007-031500.02.0: RNCC: 5 | RNVC: 2
2300007-031500-02-0: RNCC: 5 | RNVC: 9
2300007-031500.02.0: RNCC: 5 | RNVC: 9

22 Mar 1982

5340-12-355-5800
Access Cover

123555800
2125-025250.19B: RNCC: 2 | RNVC: 2
2125-025250.19B: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-309-0160
Retaining Band

123090160
531906-8002.000: RNCC: 2 | RNVC: 2
531906-8002: RNCC: 3 | RNVC: 2
531906-8002.000: RNCC: 5 | RNVC: 9

5 Dec 1986

5340-12-361-7748
Retaining Band

123617748
350757-01: RNCC: 3 | RNVC: 2
81669500008: RNCC: 3 | RNVC: 2
81.66950-0008: RNCC: 5 | RNVC: 2

17 Nov 2003

5340-12-342-8142
Loop Clamp

123428142
1531316008: RNCC: 3 | RNVC: 2
1531-316-003: RNCC: 5 | RNVC: 2
ND2713: RNCC: 5 | RNVC: 2
1531-316-003: RNCC: 5 | RNVC: 2

7 Apr 1997

5340-12-389-0985
Manual Control Lever

123890985
06360-212X80: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-342-1122
Mechanic Equipment Hardware Kit

123421122
236 805: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-12-341-7029
Rim Lock

123417029
105-6000206: RNCC: 3 | RNVC: 2
105-6000206: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-12-196-8853
Loop Clamp

121968853
0110A100261/1-10: RNCC: 3 | RNVC: 2

29 Aug 1983

5340-12-309-2205
Helical Compression Spring Seat

123092205
1216 4644: RNCC: 3 | RNVC: 2
12164644: RNCC: 5 | RNVC: 9
6.305.0.342.003.4: RNCC: 5 | RNVC: 9

23 Dec 1986

5340-12-171-9839
Metal Runner

121719839
CF413036A: RNCC: 3 | RNVC: 2
CF413036A: RNCC: 5 | RNVC: 2
CF 413 036 A: RNCC: 5 | RNVC: 2
CF413036A: RNCC: 5 | RNVC: 2
CF 413 036 A: RNCC: 5 | RNVC: 2
CF 413 036 A: RNCC: 5 | RNVC: 2

8 Dec 1977

5340-12-325-7291
Plug Button

123257291
3055450391: RNCC: 3 | RNVC: 2

3 Jul 1991

5340-12-361-2556
Mounting Plate

123612556
51113080071: RNCC: 3 | RNVC: 2
51.11308-0071: RNCC: 5 | RNVC: 2

10 Sep 2003

5340-12-123-4634
Loop Clamp

121234634
7368 040 101: RNCC: 3 | RNVC: 2
81.46140-0002: RNCC: 5 | RNVC: 2
81461400002: RNCC: 5 | RNVC: 2
7368040101: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-392-2065
Butt Hinge Leaf

123922065
DF 304 461 A: RNCC: 3 | RNVC: 2
DF 304 461 A: RNCC: 5 | RNVC: 2

15 May 2013

5340-12-336-8281
Retaining Bail

123368281
7160 9 062 285: RNCC: 3 | RNVC: 2

23 Dec 1994

5340-12-313-5684
Mounting Bracket

123135684
4900059-734301.003.0: RNCC: 3 | RNVC: 2
1228660: RNCC: 5 | RNVC: 2

16 Apr 1988

5340-12-394-4435
Rim Lock

123944435
10222-180000.003.0: RNCC: 2 | RNVC: 2
10222-180000.003.0: RNCC: 3 | RNVC: 2
04052497003749: RNCC: 5 | RNVC: 2

3 Dec 2013

5340-12-175-7000
Catch Strike

121757000
CF453225B: RNCC: 3 | RNVC: 2
CF 453 225 B: RNCC: 5 | RNVC: 2
CF453225B: RNCC: 5 | RNVC: 2
CF 453 225 B: RNCC: 5 | RNVC: 2
CF453225B: RNCC: 5 | RNVC: 2
CF 453 225 B: RNCC: 5 | RNVC: 2

11 Oct 1978

5340-12-386-2628
Access Cover

123862628
2500318-748100.000.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-348-8998
Loop Clamp

123488998
4164280141: RNCC: 3 | RNVC: 2
A 416 428 01 41: RNCC: 5 | RNVC: 9

1 Sep 1999

5340-12-328-9738
Rod End Clevis

123289738
2300232-972021.000.0: RNCC: 2 | RNVC: 2
2300232-972021.000.0: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-391-9107
Access Cover

123919107
DF 306 271 A: RNCC: 3 | RNVC: 2
DF 306 271 A: RNCC: 5 | RNVC: 2

18 Apr 2013

5340-12-358-6990
Mounting Bracket

123586990
2481-390190.000.0: RNCC: 2 | RNVC: 2
2481-390190.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-199-8287
Access Cover

121998287
536116-0013: RNCC: 2 | RNVC: 2
536116-0013: RNCC: 3 | RNVC: 2
536116-0013: RNCC: 5 | RNVC: 9
536116-0013.000: RNCC: 5 | RNVC: 9
536116-0013: RNCC: 5 | RNVC: 9
536116-0013.000: RNCC: 5 | RNVC: 9

2 Jun 1984

5340-12-330-2110
Dust And Moisture Seal Protective Plug

123302110
300F31: RNCC: 3 | RNVC: 2
GPN300F31: RNCC: 5 | RNVC: 2
50151800: RNCC: 5 | RNVC: 2
GPN300F31: RNCC: 5 | RNVC: 2
541800035: RNCC: 5 | RNVC: 2
540132777: RNCC: 5 | RNVC: 2
F31: RNCC: 5 | RNVC: 9
GPN300,F31: RNCC: 5 | RNVC: 9

14 Nov 1992

5340-12-358-7924
Buckle

123587924
2500271-71200.19: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-358-7668
Multiple Angle Bracket

123587668
9412689840: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-358-7036
Angle Bracket

123587036
6594300510: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-313-2701
Access Cover

123132701
62242: RNCC: 3 | RNVC: 2
62242: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-12-379-6296
Nut And Bolt Locking Plate

123796296
4149 332 002: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-359-6564
Mounting Bracket

123596564
9453230240: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-12-394-4014
Clamp Bracket

123944014
90894: RNCC: 3 | RNVC: 2

28 Nov 2013

5340-12-318-5082
Strap Hinge Leaf

123185082
2002.10.10.000-01: RNCC: 3 | RNVC: 9

21 Jul 1989

5340-12-317-2828
Access Door

123172828
2150922: RNCC: 3 | RNVC: 2
2150-922: RNCC: 5 | RNVC: 2

23 Mar 1989

5340-12-347-8512
Mounting Bracket

123478512
2300405-151121.000: RNCC: 2 | RNVC: 2
9916322: RNCC: 3 | RNVC: 2
2300405-151121.000: RNCC: 5 | RNVC: 2
9916322: RNCC: 5 | RNVC: 9
2300405-151121.000: RNCC: 5 | RNVC: 9

23 Feb 1999

5340-12-332-8918
Pawl Fastener

123328918
00098128220: RNCC: 3 | RNVC: 9
108 120000003: RNCC: 5 | RNVC: 9
9812822: RNCC: 5 | RNVC: 9
108-12000.003: RNCC: 5 | RNVC: 9

1 Oct 1993

5340-12-313-3776
Retaining Strap

123133776
1220000068: RNCC: 3 | RNVC: 2
134/2175-12-00-36: RNCC: 5 | RNVC: 2
3100/2175-12-00-36: RNCC: 5 | RNVC: 9

26 Mar 1988

5340-12-164-7644
Retaining Strap

121647644
23302-052000.22: RNCC: 2 | RNVC: 2
8403471: RNCC: 3 | RNVC: 2
0047-704: RNCC: 5 | RNVC: 2
0047704: RNCC: 5 | RNVC: 2
23302-052000-22: RNCC: 5 | RNVC: 9
23302-052000.22: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-2120
Mounting Bracket

123332120
00098128750: RNCC: 3 | RNVC: 9
328-180119.001: RNCC: 5 | RNVC: 9
98128750: RNCC: 5 | RNVC: 9

10 Nov 1993

5340-12-188-1205
Detent Plunger

121881205
24118-01: RNCC: 3 | RNVC: 2
24118-01: RNCC: 5 | RNVC: 2
24118-01: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-12-192-3076
Double Angle Bracket

121923076
1434-4920-02: RNCC: 3 | RNVC: 2
1434-4920.02: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-372-8182
Mounting Bracket

123728182
1051-U2: RNCC: 3 | RNVC: 2
570736077: RNCC: 5 | RNVC: 2

23 Aug 2007

5340-12-362-3093
Mounting Bracket

123623093
69172-004: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-377-2652
Angle Bracket

123772652
08189072: RNCC: 3 | RNVC: 2

22 Dec 2008

5340-12-386-3258
Bumper

123863258
800435: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-186-1608
Loop Clamp

121861608
2800401: RNCC: 3 | RNVC: 2

2 Dec 1980

5340-12-363-5170
Double Angle Bracket

123635170
ATF5211061: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-390-0338
Loop Clamp

123900338
310754: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-351-0423
Angle Bracket

123510423
2300387-700620.003: RNCC: 2 | RNVC: 2
9907325: RNCC: 3 | RNVC: 2
9907325: RNCC: 5 | RNVC: 9
2300387-700620.003: RNCC: 5 | RNVC: 9

19 Jun 2000

5340-12-356-7699
Webbing Strap

123567699
17.108.3203.04: RNCC: 2 | RNVC: 2
17.108.3203.04: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-12-376-2120
Door Handle Unit

123762120
10065001: RNCC: 3 | RNVC: 2

26 Aug 2008

5340-12-367-8452
Angle Bracket

123678452
2300421-251400.007: RNCC: 2 | RNVC: 2
2300421-251400.007: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-12-132-1023

5340-12-386-7375
Spring Tension Clip

123867375
0009979544: RNCC: 3 | RNVC: 2
0009979544: RNCC: 5 | RNVC: 2

27 Sep 2011

5340-12-375-1401
Double Angle Bracket

123751401
L792M3010215: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-365-7364
Mending Plate

123657364
0417 1242: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-12-314-1260
Spring Tension Clip

123141260
1333000102: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-12-314-5224
Support Hook

123145224
CF 324 657 B: RNCC: 2 | RNVC: 2
CF 324 657 B: RNCC: 3 | RNVC: 2
CF 324 657 B: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-339-3045
Bow Handle

123393045
3963221: RNCC: 3 | RNVC: 2
T 460: RNCC: 5 | RNVC: 2

7 Nov 1995

5340-12-349-8041
Retaining Bail

123498041
52 53 2 313 289: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-311-1126
Access Cover

123111126
2300074-5895.00: RNCC: 2 | RNVC: 2
2300074-5895.00: RNCC: 3 | RNVC: 2
2300074-5895.00: RNCC: 5 | RNVC: 9

28 Jul 1987

5340-12-382-4486
Lock-Release Lever

123824486
757Z186: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-12-337-1381
Plug Button

123371381
12 991 312: RNCC: 3 | RNVC: 2
81.42058-0001: RNCC: 5 | RNVC: 2
81420580001: RNCC: 5 | RNVC: 2
6031.400.010.2: RNCC: 5 | RNVC: 2
E 6031.400.010.2: RNCC: 5 | RNVC: 2
154539: RNCC: 5 | RNVC: 9

24 Jan 1995

5340-12-197-7387
Double Angle Bracket

121977387
A-920265-409: RNCC: 3 | RNVC: 2
A920265-409: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-317-1289
Helical Compression Spring Retainer

123171289
1126-112000: RNCC: 3 | RNVC: 2

13 Mar 1989

5340-12-313-4627
Nonmetallic Bumper

123134627
200.684: RNCC: 3 | RNVC: 2

1 Apr 1988

5340-12-177-1239
Angle Bracket

121771239
CF 432 499: RNCC: 2 | RNVC: 2
CF 432 499: RNCC: 3 | RNVC: 2
CF432499: RNCC: 5 | RNVC: 2
CF 432 499: RNCC: 5 | RNVC: 2
CF 432 499: RNCC: 5 | RNVC: 2
CF432499: RNCC: 5 | RNVC: 2
CF432499: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-382-3926
Key Blank

123823926
88839: RNCC: 3 | RNVC: 2

15 Jun 2010

5340-12-121-7683

5340-12-355-1254
Antipilferage Seal Locking Wire

123551254
DIN1367-0,7-0,5STZN AUF SPULEN: RNCC: 2 | RNVC: 2
DIN1367-07-05STZN: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-12-312-8388
Loop Clamp

123128388
DIN3016-2-G1-525X25-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-525X25-W1-2: RNCC: 3 | RNVC: 2
SP525/25SK: RNCC: 3 | RNVC: 2
1610000525: RNCC: 5 | RNVC: 2
1068977: RNCC: 5 | RNVC: 2
DIN3016-G1-525X25-W1-2: RNCC: 5 | RNVC: 9
VG95931-G525X25-W1: RNCC: 5 | RNVC: 9

10 Feb 1988

5340-12-349-5159
Mounting Bracket

123495159
46512314464: RNCC: 3 | RNVC: 2
46 51 2 314 464: RNCC: 5 | RNVC: 2

24 Nov 1999

5340-12-148-3202
Hand Crank

121483202
VG85086-A-125X11-GT: RNCC: 2 | RNVC: 2
VG85086-A-125X11-GT: RNCC: 3 | RNVC: 2
VG85086-A-125X11-GT: RNCC: 3 | RNVC: 2
VG85086-A-125X11-GT: RNCC: 3 | RNVC: 9
604080: RNCC: 5 | RNVC: 2
61820040: RNCC: 5 | RNVC: 2
A125X11VG85086-GTW-40: RNCC: 5 | RNVC: 9
A125X11VG85086-GTW40: RNCC: 5 | RNVC: 9
A125X11VG85086GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-6003
Compression Cup

123016003
C20136-A4-B134: RNCC: 3 | RNVC: 2
TFS72-50134: RNCC: 5 | RNVC: 2
T.DRUCK.4,TZ.134: RNCC: 5 | RNVC: 2
C20136A4B134: RNCC: 5 | RNVC: 9

25 Oct 1984

5340-12-164-5661
Buckle

121645661
XX 5091/25 RAL 6031: RNCC: 3 | RNVC: 2
3220072-RAL6031: RNCC: 3 | RNVC: 2
0009880355: RNCC: 5 | RNVC: 2
3220072: RNCC: 5 | RNVC: 2
322A220: RNCC: 5 | RNVC: 2
02969-26MM-RAL6031: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-156-5625
Dust And Moisture Seal Protective Cap

121565625
800M10X1: RNCC: 3 | RNVC: 2
GPN800AM10X1: RNCC: 5 | RNVC: 2
GPN800M10X1: RNCC: 5 | RNVC: 2
20572: RNCC: 5 | RNVC: 2
800101000: RNCC: 5 | RNVC: 9
GPN800,M10X1 FORM A: RNCC: 5 | RNVC: 9
GPN800M10X1F0RMA: RNCC: 5 | RNVC: 9
M10X1GPN800F0RMA: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-330-2497
Nonmetallic Bumper

123302497
6600153-982111.003.0: RNCC: 2 | RNVC: 2
6600153-982111.003.0: RNCC: 3 | RNVC: 2
6600153-982111.003.0: RNCC: 3 | RNVC: 2

21 Nov 1992

5340-12-374-3922
Spacing Threaded Standoff

123743922
5.14.454: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-191-2506
Strap Bolt

121912506
2500058-130210.04: RNCC: 2 | RNVC: 2
2500058-130210.04: RNCC: 3 | RNVC: 2
2500058-130210.04: RNCC: 3 | RNVC: 2
2500058-130210.04: RNCC: 5 | RNVC: 2
2500058-130210.04: RNCC: 5 | RNVC: 9
2500058-130210.04: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-186-6727
Quick Release Plunger

121866727
1444344: RNCC: 3 | RNVC: 2
75E5.22.21: RNCC: 5 | RNVC: 2
75E5-22-21: RNCC: 5 | RNVC: 9

26 Jan 1981

5340-12-312-3451
Extension Drawer Slide Section

123123451
4312 712 57090: RNCC: 2 | RNVC: 2
4900214-101000.14: RNCC: 2 | RNVC: 2
4312 712 57090: RNCC: 3 | RNVC: 2
4900214-101 000.14: RNCC: 5 | RNVC: 9

18 Dec 1987

5340-12-182-4506
Access Cover

121824506
4979041-211: RNCC: 2 | RNVC: 2
4978001-42: RNCC: 5 | RNVC: 9

1 Feb 1980

5340-12-332-5227
Turnbuckle

123325227
480/7346-08-11-00: RNCC: 3 | RNVC: 2
480-7346-08-11-00: RNCC: 5 | RNVC: 2

18 Aug 1993

5340-12-199-6764
Angle Bracket

121996764
5802017-531000.00: RNCC: 2 | RNVC: 2
5802017-531000.00: RNCC: 3 | RNVC: 2

22 May 1984

5340-12-301-5763
Rod End Clevis

123015763
DIN71752-G4X8-9SMN28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G4X8-9SMNPB28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G4X8-A3P: RNCC: 2 | RNVC: 2
DIN71752-G4X8-A3P: RNCC: 3 | RNVC: 2
DIN71752-G4X8-A3P: RNCC: 3 | RNVC: 2
100200040008/024: RNCC: 5 | RNVC: 2
DIN71752-G4X8-A2P: RNCC: 5 | RNVC: 2
S12B.E01.04.00.009: RNCC: 5 | RNVC: 9
G4X8DIN71752: RNCC: 5 | RNVC: 9
4199094: RNCC: 5 | RNVC: 9

25 Oct 1984

5340-12-181-1071
Bow Handle

121811071
81970015036: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-326-3703
Mending Plate

123263703
3963000640: RNCC: 3 | RNVC: 2
396 300 06 40: RNCC: 5 | RNVC: 2

6 Sep 1991

5340-12-318-0175
Access Cover

123180175
51541110001: RNCC: 3 | RNVC: 2
4071310021: RNCC: 3 | RNVC: 2
51.54111.0001: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-318-8687
Double Angle Bracket

123188687
702-710000-903-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-339-8592
Double Angle Bracket

123398592
5800748-11371: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-197-0181
Pad Eye

121970181
01TC33905: RNCC: 3 | RNVC: 2

12 Sep 1983

5340-12-352-7147
Access Cover

123527147
64416375: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-353-9436
Spring Loaded Cylinder Fastener

123539436
FG0810ARR-V2A: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-364-2615
Double Angle Bracket

123642615
4374911641: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-374-1973
Loop Clamp

123741973
LN9490A19: RNCC: 2 | RNVC: 9

29 Jan 2008

5340-12-190-6246
Helical Compression Spring Seat

121906246
E1430055: RNCC: 3 | RNVC: 2

7 Dec 1981

5340-12-384-3247
Mounting Plate

123843247
F6784237: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-12-345-4320
Mounting Plate

123454320
54.0053.226.00: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-12-394-3138
Mounting Plate

123943138
000596800214: RNCC: 3 | RNVC: 2
SFB 16 ITEM 1.3: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-12-306-4078
Shimmy Damper

123064078
30855532000: RNCC: 3 | RNVC: 2
4Z.85228-D: RNCC: 5 | RNVC: 2

26 Feb 1986

5340-12-368-4586
Nonmetallic Bumper

123684586
300116: RNCC: 3 | RNVC: 2
4-V56714: RNCC: 5 | RNVC: 2

14 Mar 2006

5340-12-300-2039
Mending Plate

123002039
CF 491 514 A: RNCC: 3 | RNVC: 2
CF 491 514 A: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-374-2519
Access Cover

123742519
L521M3031106: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-378-9707
Protection Bellows

123789707
5320980082: RNCC: 3 | RNVC: 2

5 Jun 2009

5340-12-364-3210
Door Handle

123643210
209777: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-12-317-2533
Access Cover

123172533
CF 446 807: RNCC: 3 | RNVC: 2
CF 446 807: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-166-0199
Mending Plate

121660199
03425407: RNCC: 3 | RNVC: 2
E5158-71-11-06: RNCC: 5 | RNVC: 2
3425407EE5022-71: RNCC: 5 | RNVC: 2
5158-71-11-06: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-12-392-4747
Dust And Moisture Seal Protective Cap-Plug

123924747
GPN920/9997: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-161-9616
Angle Bracket

121619616
100332-014518.01: RNCC: 2 | RNVC: 2
100332-014518.01: RNCC: 3 | RNVC: 2
100332-55140.01: RNCC: 5 | RNVC: 2
100332-55140.01: RNCC: 5 | RNVC: 2
100332-55140-01: RNCC: 5 | RNVC: 2
100332-55140-01: RNCC: 5 | RNVC: 2
100332-55140-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-7850
Lock-Release Lever

123567850
06460-2082X20: RNCC: 3 | RNVC: 2
NLM06460-2082X20: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-12-154-8418
Loop Clamp

121548418
51.2404.093-02: RNCC: 3 | RNVC: 2
51-2404-093-02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-8726
Mounting Bracket

123488726
245/7346-58-11-00: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-199-5579
Nonmetallic Bumper

121995579
2300002-122260.003: RNCC: 2 | RNVC: 2
2300002-122260.003: RNCC: 3 | RNVC: 2
2300002-122260-003: RNCC: 5 | RNVC: 9
2300002-122260.003: RNCC: 5 | RNVC: 9

11 May 1984

5340-12-351-3517
Verriegelun Buegel

123513517
10030077: RNCC: 3 | RNVC: 2
232-096824: RNCC: 5 | RNVC: 2

18 Jul 2000

5340-12-300-9875
Resilient Mount

123009875
DIN95369-A3-5-M12-M-ST: RNCC: 2 | RNVC: 2
151005-M12-HD.ST-70: RNCC: 5 | RNVC: 2
60-200-070 HD-M12: RNCC: 5 | RNVC: 2
C2090 HDS M12: RNCC: 5 | RNVC: 2
C2090HDSM12: RNCC: 5 | RNVC: 9
VG95369-A3-5-M12-MVQ-H-ST: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-162-4346
Recess Handle

121624346
5810006: RNCC: 3 | RNVC: 2
0374 0005: RNCC: 5 | RNVC: 2
47323: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-324-6841
Mending Plate

123246841
52820-W10.04: RNCC: 3 | RNVC: 2

15 Mar 1991

5340-12-388-2326
Angle Bracket

123882326
865341704: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-12-370-2913
Rod End Clevis

123702913
0000296727: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-12-361-7061
Mounting Plate

123617061
8351533040: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-12-196-7261
Mending Plate

121967261
2360-261130.01.0: RNCC: 2 | RNVC: 2
2360-261130.01.0: RNCC: 3 | RNVC: 2
2360-261130.01.0: RNCC: 5 | RNVC: 2
2360-261130-01-0: RNCC: 5 | RNVC: 9

8 Aug 1983

5340-12-189-6019
Electrical-Mechanical Equipment Post

121896019
P-895013-003: RNCC: 3 | RNVC: 2
P895013-003: RNCC: 5 | RNVC: 2

7 Oct 1981

5340-12-146-1828
Loop Clamp

121461828
DIN3016-2-G1-80X25-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-80X25-W1-2: RNCC: 3 | RNVC: 2
SP80/25SK: RNCC: 3 | RNVC: 2
1610000080: RNCC: 5 | RNVC: 2
SP80-25SKZ: RNCC: 5 | RNVC: 2
VG95931-G80X25-W1: RNCC: 5 | RNVC: 9
VG95931G80X25W1: RNCC: 5 | RNVC: 9
23114-99-0520: RNCC: 5 | RNVC: 9
DIN3016-G1-80X25-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-6151
Dust And Moisture Seal Protective Plug

123056151
4V2443-A: RNCC: 3 | RNVC: 2
4V2443A: RNCC: 5 | RNVC: 2
4V2443-A: RNCC: 5 | RNVC: 9
4V2443A: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-12-302-7854
Metal Runner

123027854
CF 339 599 B: RNCC: 2 | RNVC: 2
CF 339 599 B: RNCC: 3 | RNVC: 2
CF 339 599 B: RNCC: 5 | RNVC: 2
CF 339 599 A: RNCC: 5 | RNVC: 9
CF 339 599 A: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-380-5847
Mounting Bracket

123805847
500114-1: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-12-358-6817
Bow Handle

123586817
2500262-394203.000.0: RNCC: 2 | RNVC: 2
2500262-394203.000.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-363-9937
Retaining Strap

123639937
700325035100: RNCC: 3 | RNVC: 2
1/1D9-35MMN325: RNCC: 5 | RNVC: 2

10 Aug 2004

5340-12-353-7566
Spacing Threaded Standoff

123537566
5.03.351: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-312-5139
Access Hole Frame

123125139
11245-29-6: RNCC: 3 | RNVC: 2
11245-29-6: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-342-6212
Mounting Plate

123426212
6 223 002 212: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-345-9298
Retaining Clip

123459298
0009941248: RNCC: 3 | RNVC: 2
A 000 994 12 48: RNCC: 5 | RNVC: 9

18 May 1998

5340-12-315-9308
Plain Solid Disk

123159308
28209910460: RNCC: 3 | RNVC: 2
28209910460: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-12-348-8610
Mounting Bracket

123488610
245/7346-64-11-00: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-350-6291
Helical Compression Spring Retainer

123506291
2871716M1: RNCC: 3 | RNVC: 2
194932122: RNCC: 5 | RNVC: 2

26 Apr 2000

5340-12-128-7408
Nut And Bolt Locking Plate

121287408
576G01003: RNCC: 3 | RNVC: 2
396034: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-374-4130
Bridge Clamp

123744130
5561848: RNCC: 2 | RNVC: 2
5561848: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-12-375-2234
Double Angle Bracket

123752234
L243M3810211: RNCC: 3 | RNVC: 2

6 May 2008

5340-12-365-7808
Expansion Plug

123657808
DIN443-28-A4C: RNCC: 2 | RNVC: 2
0114 8153: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-12-361-1054
Mounting Plate

123611054
5316896: RNCC: 3 | RNVC: 2
6503.201.10.34.000: RNCC: 5 | RNVC: 2

22 Aug 2003

5340-12-372-8140
Sliding Block

123728140
5050612376: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-12-323-2225
Nonmetallic Bumper

123232225
100017126: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-393-0412
Section Block Clamp

123930412
M291M800120000: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-326-8791
Mounting Plate

123268791
2475-5061.00: RNCC: 3 | RNVC: 2
2475-5061.00: RNCC: 5 | RNVC: 2

5 Nov 1991

5340-12-366-2956
Mechanical Stop

123662956
104183: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-326-4378
Loop Clamp

123264378
6209970590: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-350-8142
Mounting Bracket

123508142
105-94141: RNCC: 3 | RNVC: 2

24 May 2000

5340-12-377-2050
Section Block Clamp

123772050
41216888: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-310-7264
Retaining Strap

123107264
4900278-602200.02: RNCC: 2 | RNVC: 2
4900278-602200.02: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-12-312-3437
Door Holder

123123437
100000699: RNCC: 2 | RNVC: 2
100000699: RNCC: 3 | RNVC: 2
331921: RNCC: 5 | RNVC: 2

18 Dec 1987

5340-12-321-4080
Electrical-Mechanical Equipment Post

123214080
4507101: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-183-3256
Metal Runner

121833256
2706501: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-122-8918

5340-12-349-8850
Double Angle Bracket

123498850
54.1038.130.03: RNCC: 2 | RNVC: 2
54.1038.130.03: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-332-1298
Door Handle

123321298
1H4839205: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-337-7041
Retaining Strap

123377041
1243231140: RNCC: 3 | RNVC: 2

30 Mar 1995

5340-12-180-3111
Webbing Strap

121803111
T12693: RNCC: 3 | RNVC: 2
T12693: RNCC: 5 | RNVC: 9

5 Sep 1979

5340-12-323-7321
Loop Clamp

123237321
LN3-10PA-BOHRUNG-AF6DIN74: RNCC: 3 | RNVC: 2
7800014611: RNCC: 5 | RNVC: 2
78000 14611: RNCC: 5 | RNVC: 9
5802233-040500.011: RNCC: 5 | RNVC: 9

12 Dec 1990

5340-12-351-7661
Webbing Strap

123517661
79671-0007: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-158-3020
Dust And Moisture Seal Protective Cap-Plug

121583020
52-1260-080-03: RNCC: 3 | RNVC: 2
52-1260-080-03LV: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-163-7412
Loop Clamp

121637412
LN9491BM10: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-701-7931
Mounting Bracket

127017931
VG95211-ML-127017931: RNCC: 2 | RNVC: 2
5.12.8101.2115.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-159-8173
Rod End Clevis

121598173
A10-28-713-01-0: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-4344
Loop Clamp

127014344
VG95211-ML-127014344: RNCC: 2 | RNVC: 2
5.12.5313.1000.23: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-1317
Mending Plate

123211317
P-295645-401: RNCC: 3 | RNVC: 2
P295645-401: RNCC: 5 | RNVC: 2

30 Mar 1990

5340-12-333-2213
Access Cover

123332213
6600153-982115.000.0: RNCC: 2 | RNVC: 2
6600153-982115.000.0: RNCC: 3 | RNVC: 2

11 Nov 1993

5340-12-379-5263
Access Cover

123795263
120D010020.004.0: RNCC: 2 | RNVC: 2
120D010020.004.0: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-12-325-7649
Mounting Bracket

123257649
2047470: RNCC: 3 | RNVC: 2
0020474709: RNCC: 5 | RNVC: 2
3.448220: RNCC: 5 | RNVC: 2

5 Jul 1991

5340-12-340-6608
Dust And Moisture Seal Protective Plug

123406608
63 6591 620 056: RNCC: 3 | RNVC: 2
63.6591.620.056: RNCC: 5 | RNVC: 2
3 591 404 720: RNCC: 5 | RNVC: 2

21 May 1996

5340-12-158-5176

5340-12-307-9468
Gummi- Riemen

123079468
8-4255.00: RNCC: 2 | RNVC: 2
8-4255.00: RNCC: 3 | RNVC: 2
9859231: RNCC: 5 | RNVC: 9
8-4255.00: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-372-0436
Mounting Bracket

123720436
S281M3043102: RNCC: 2 | RNVC: 2
S281M3043102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-182-3225
Nonmetallic Bumper

121823225
3129973782: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-330-1746
Sealing Plug Assembly

123301746
3159: RNCC: 3 | RNVC: 2
3159: RNCC: 5 | RNVC: 2

11 Nov 1992

5340-12-179-3583
Retaining Strap

121793583
3816520314: RNCC: 3 | RNVC: 2

25 Jun 1979

5340-12-311-5709
Rigid Caster

123115709
318206096000: RNCC: 3 | RNVC: 2

21 Sep 1987

5340-12-172-0940
Transom Chain

121720940
4469-425: RNCC: 3 | RNVC: 2

19 Dec 1977

5340-12-701-9196
Loop Clamp

127019196
VG95211-ML-127019196: RNCC: 2 | RNVC: 2
T2-28-15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-6308
Electrical-Mechanical Equipment Post

123226308
VG95148B8XM5X24-NRST: RNCC: 2 | RNVC: 2
VG95148B8XM5X24-NRST: RNCC: 3 | RNVC: 2
56.0158.135.03: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-12-347-4852
Mounting Bracket

123474852
1000173-060505.000.0: RNCC: 2 | RNVC: 2
1000173-060505.000.0: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-12-178-5771
Dust And Moisture Seal Protective Plug

121785771
30-91010-0031: RNCC: 3 | RNVC: 2

3 May 1979

5340-12-307-4234
Electrical-Mechanical Equipment Post

123074234
VG95148C5,5XM3X15-ST: RNCC: 2 | RNVC: 2
5.13.151: RNCC: 3 | RNVC: 2
5.13.154: RNCC: 3 | RNVC: 2
18H174: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X15-ST: RNCC: 3 | RNVC: 2
09 0004 073: RNCC: 5 | RNVC: 2
V5737/B: RNCC: 5 | RNVC: 2

18 Jun 1986

5340-12-320-4899
Metal Runner

123204899
C117-A44-C45: RNCC: 3 | RNVC: 2

19 Jan 1990

5340-12-334-8173
Mounting Bracket

123348173
6205220020: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-322-1671
Manual Control Lever

123221671
307.601-60480.08: RNCC: 3 | RNVC: 2

30 Jul 1990

5340-12-361-9887
Dust And Moisture Seal Protective Cap-Plug

123619887
63 6090 208 067: RNCC: 3 | RNVC: 2
636090208067: RNCC: 5 | RNVC: 2

12 Dec 2003

5340-12-025-9806

5340-12-344-1900
Mounting Plate

123441900
2300387-250400.001: RNCC: 2 | RNVC: 2
2300387-250400.001: RNCC: 3 | RNVC: 2
2300387-250400.001: RNCC: 5 | RNVC: 9
9910071: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-090-5352

5340-12-388-6631
Mounting Bracket

123886631
X00018790: RNCC: 3 | RNVC: 2

11 Apr 2012

5340-12-328-8765
Mounting Bracket

123288765
2300232-820620.000.0: RNCC: 2 | RNVC: 2
2300232-820620.000.0: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-385-9774
Manual Control Lever

123859774
2481-391002.003.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-358-7097
Runner

123587097
2719-942680.031.0: RNCC: 2 | RNVC: 2
2719-942680.031.0: RNCC: 3 | RNVC: 2

7 Nov 2002

5340-12-338-8859
Angle Bracket

123388859
0000 1055 236: RNCC: 3 | RNVC: 2
D 0000 1055 236: RNCC: 5 | RNVC: 2

5 Sep 1995

5340-12-325-8787
Helical Compression Spring Seat

123258787
17.1.01.040: RNCC: 3 | RNVC: 9
17201340-0: RNCC: 5 | RNVC: 9
3073: RNCC: 5 | RNVC: 9

17 Jul 1991

5340-12-341-0055
Clamping Catch

123410055
7820354370: RNCC: 3 | RNVC: 2
78203 54370: RNCC: 5 | RNVC: 9

16 Jul 1996

5340-12-162-9623
Retaining Strap

121629623
5909953768: RNCC: 3 | RNVC: 2
5909953768: RNCC: 5 | RNVC: 2
5909953768: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-340-8970
Retaining Clip

123408970
NTN 47888: RNCC: 3 | RNVC: 2

2 Jul 1996

5340-12-385-4633
Section Block Clamp

123854633
5839950268: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-170-8767
Strap Fastener Loop

121708767
5800044-1033.00: RNCC: 2 | RNVC: 2
5800044-1033.00: RNCC: 3 | RNVC: 2
5800044-1033-00: RNCC: 5 | RNVC: 2
5800044-1033-00: RNCC: 5 | RNVC: 9

19 Aug 1977

5340-12-390-6307
Mounting Bracket

123906307
314244: RNCC: 3 | RNVC: 2
2170-07-54-00/37: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-367-4672
Nonmetallic Bumper

123674672
68-0035: RNCC: 3 | RNVC: 2
(241)D229668-0035: RNCC: 5 | RNVC: 9

24 Aug 2005

5340-12-356-3329
Helical Compression Spring Seat

123563329
B10.13600-0002POS003: RNCC: 3 | RNVC: 2
E10.13672-0001: RNCC: 5 | RNVC: 9

14 Feb 2002

5340-12-325-5320
Metal Runner

123255320
23302-181321.00: RNCC: 2 | RNVC: 2
2663989: RNCC: 3 | RNVC: 2

14 Jun 1991

5340-12-180-6658
Mounting Bracket

121806658
TY4C1HS: RNCC: 3 | RNVC: 2
2873096: RNCC: 5 | RNVC: 2
0287 3096: RNCC: 5 | RNVC: 2
TY4-C1X: RNCC: 5 | RNVC: 2
TY4C1X: RNCC: 5 | RNVC: 2
2873096EE8935-37: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-328-9508
Resilient Mount

123289508
6179880111: RNCC: 3 | RNVC: 2
617 988 01 11: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-330-3371
Resilient Mount

123303371
0822419002: RNCC: 3 | RNVC: 2
A15089: RNCC: 5 | RNVC: 2
0822419002: RNCC: 5 | RNVC: 2

3 Dec 1992

5340-12-352-2137
Double Angle Bracket

123522137
T342M3001101: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-325-7919
Dashpot

123257919
439975: RNCC: 3 | RNVC: 2
0009806264: RNCC: 5 | RNVC: 2

10 Jul 1991

5340-12-339-2088
Mending Plate

123392088
1544971: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-12-334-0789
Resilient Mount

123340789
1152401818: RNCC: 3 | RNVC: 2
115 240 1818: RNCC: 5 | RNVC: 2

17 Mar 1994

5340-12-388-5202
Dust And Moisture Seal Protective Plug

123885202
300F411: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-12-308-7938
Dust And Moisture Seal Protective Plug

123087938
620U8B: RNCC: 3 | RNVC: 2
620000800: RNCC: 5 | RNVC: 9
GPN620,U8B: RNCC: 5 | RNVC: 9

18 Nov 1986

5340-12-362-4760
Mounting Bracket

123624760
201594745: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-128-6551

5340-12-133-4043

5340-12-358-1559
Threaded Rod End

123581559
2800-195000.001.0: RNCC: 2 | RNVC: 2
2800-195000.001.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-179-1541
Resilient Mount

121791541
DIN95363-A40X30-NR45ST: RNCC: 4 | RNVC: 1
81100-40X30-M8X20.NR45.ST: RNCC: 5 | RNVC: 2
57810800012: RNCC: 5 | RNVC: 2
781080WEICH: RNCC: 5 | RNVC: 2
00672: RNCC: 5 | RNVC: 2
1.40.30.1.45NR/ST: RNCC: 5 | RNVC: 2
1.40.30.1.45NRST: RNCC: 5 | RNVC: 2
811.000.040.030.08X20.NR45.ST: RNCC: 5 | RNVC: 2
VG95363-A40X30-NR45ST: RNCC: 5 | RNVC: 9
VG95363A40X30NR45ST: RNCC: 5 | RNVC: 9

11 Jun 1979

5340-12-315-5664
Nonmetallic Bumper

123155664
847-4-0744-088.NR65.ST: RNCC: 3 | RNVC: 2
0744-088: RNCC: 5 | RNVC: 2
0744088: RNCC: 5 | RNVC: 2
4-0744-088: RNCC: 5 | RNVC: 2
8406271: RNCC: 5 | RNVC: 2

9 Nov 1988

5340-12-196-9817
Angle Bracket

121969817
4900059-221454.000.0: RNCC: 3 | RNVC: 2
4900059-221454-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-341-1856
Protection Bellows

123411856
V6-589: RNCC: 3 | RNVC: 2
909730538: RNCC: 5 | RNVC: 2

7 Aug 1996

5340-12-324-8434
Kunst Gleitschiene

123248434
6600133-331110.009: RNCC: 2 | RNVC: 2
002 528 900-116: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-302-5171
Ball Socket Seat

123025171
4039910022: RNCC: 3 | RNVC: 2

9 Jan 1985

5340-12-319-6989
Metallic Bumper

123196989
54.0023.105.00: RNCC: 2 | RNVC: 2
54.0023.105.00: RNCC: 3 | RNVC: 2

26 Oct 1989

5340-12-302-8151
Plug Button

123028151
JJ54400: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-337-8503
Mounting Plate

123378503
G-102084: RNCC: 3 | RNVC: 2

24 Apr 1995

5340-12-011-4998

5340-12-385-2895
Frame Se Connector

123852895
99 366-51: RNCC: 3 | RNVC: 2

18 May 2011

5340-12-164-6630
Mending Plate

121646630
490126-30006-06: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-199-1142
Mending Plate

121991142
AW7048.660.18-A001: RNCC: 3 | RNVC: 2
746667: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-181-9783
Mounting Bracket

121819783
5800822-05211: RNCC: 2 | RNVC: 2
5800822-05211: RNCC: 3 | RNVC: 2
5800822-05211: RNCC: 5 | RNVC: 9

4 Jan 1980

5340-12-319-8415
Extension Drawer Slide Section

123198415
335948-8482.000: RNCC: 2 | RNVC: 2
4900288-270300.00: RNCC: 2 | RNVC: 2
4312 711 28190: RNCC: 3 | RNVC: 2
335948-8482.000: RNCC: 5 | RNVC: 2

9 Nov 1989

5340-12-157-8676
Dust And Moisture Seal Protective Cap-Plug

121578676
610U24: RNCC: 3 | RNVC: 2
GPN610U24: RNCC: 5 | RNVC: 2
GPN610U24: RNCC: 5 | RNVC: 2
002346-0024: RNCC: 5 | RNVC: 2
610002400: RNCC: 5 | RNVC: 9
GPN610,U24: RNCC: 5 | RNVC: 9
U24: RNCC: 5 | RNVC: 9
U24GPN610: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-6638
Access Cover

121876638
5800100215: RNCC: 3 | RNVC: 2

24 Apr 1981

5340-12-364-4630
Loop Clamp

123644630
3009950044: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-12-127-8040

5340-12-390-0271
Loop Clamp

123900271
312223: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-369-5605
Butt Hinge

123695605
040242: RNCC: 3 | RNVC: 2
01625: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-12-325-8048
Mounting Bracket

123258048
3962680040: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-12-339-0366
Nonmetallic Bumper

123390366
0009877770: RNCC: 3 | RNVC: 2

29 Sep 1995

5340-12-360-3792
Mounting Plate

123603792
54.1094.705.02: RNCC: 3 | RNVC: 2

15 May 2003

5340-12-316-9652
Access Cover

123169652
3222610233: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-321-9119
Mending Plate

123219119
7800810003: RNCC: 3 | RNVC: 2
78008 10003: RNCC: 5 | RNVC: 9

9 Jul 1990

5340-12-366-6487
Dust And Moisture Seal Protective Cover

123666487
1030055-970100.001.0: RNCC: 3 | RNVC: 2

19 May 2005

5340-12-318-9139
Metal Runner

123189139
47.4.821.0042: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-12-321-9518
Dust And Moisture Seal Protective Plug

123219518
350 I 23: RNCC: 3 | RNVC: 2
350I23: RNCC: 5 | RNVC: 2
GPN350123: RNCC: 5 | RNVC: 2
350I23: RNCC: 5 | RNVC: 2
GPN350123: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-12-365-0623
Retaining Strap

123650623
0019954465: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-163-0583
Mending Plate

121630583
712A08073: RNCC: 3 | RNVC: 2
712A08073E1: RNCC: 5 | RNVC: 2
712A08073E1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-327-1343
Mechanical Stop

123271343
6403421: RNCC: 3 | RNVC: 2

5 Dec 1991

5340-12-382-3516
Spring Loaded Cylinder Fastener

123823516
EH2212.210: RNCC: 3 | RNVC: 2

9 Jun 2010

5340-12-361-0834
Angle Bracket

123610834
J21320022-003: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-701-9672
Retaining Bail

127019672
VG95211-ML-127019672: RNCC: 2 | RNVC: 2
01.7204.8665.04: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-376-4200
Mounting Bracket

123764200
81062015125: RNCC: 3 | RNVC: 2
81.06201-5125: RNCC: 5 | RNVC: 2

26 Sep 2008

5340-12-394-6445
Door Button

123946445
200-0447: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-361-4162
Retaining Band

123614162
10-00 000.27: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-168-5706
Rod End Clevis

121685706
1000025-410000.07: RNCC: 3 | RNVC: 2
1000025-410000-07: RNCC: 3 | RNVC: 2
1000025-410000-07: RNCC: 5 | RNVC: 9
1000025-410000.07: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-195-8060
Mending Plate

121958060
160-24545-119: RNCC: 3 | RNVC: 2
160-24545-119: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-332-0660
Bow Handle

123320660
5803681-210000.005: RNCC: 2 | RNVC: 2
7174746: RNCC: 3 | RNVC: 2
717.4746: RNCC: 5 | RNVC: 2

20 Jul 1993

5340-12-324-4301
Mending Plate

123244301
54.0070.897.04: RNCC: 2 | RNVC: 2
54.0070.897.04: RNCC: 3 | RNVC: 2

15 Feb 1991

5340-12-349-8332
Angle Bracket

123498332
105-61722: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-12-308-1411
Retaining Strap

123081411
4016080106: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-320-8267
Dust And Moisture Seal Protective Plug

123208267
V40X25L,86: RNCC: 3 | RNVC: 2
731.36.012: RNCC: 5 | RNVC: 2
V371.36.012: RNCC: 5 | RNVC: 2

21 Feb 1990

5340-12-335-5537
Mounting Bracket

123355537
6010760435: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-12-188-0150
Dust And Moisture Seal Protective Cap

121880150
01TC31911: RNCC: 3 | RNVC: 2

27 May 1981

5340-12-333-7649
Manual Control Handle

123337649
15 0004 463: RNCC: 2 | RNVC: 2
15 0004 463: RNCC: 3 | RNVC: 2
150004463: RNCC: 5 | RNVC: 2

3 Feb 1994

5340-12-345-9203
Helical Compression Spring Seat

123459203
E24523: RNCC: 3 | RNVC: 2

18 May 1998

5340-12-187-9126
Mending Plate

121879126
8731592640: RNCC: 2 | RNVC: 2
8731592640: RNCC: 3 | RNVC: 2

19 May 1981

5340-12-020-7135

5340-12-148-5020

5340-12-371-3344
Multiple Angle Bracket

123713344
1227 9843: RNCC: 3 | RNVC: 2

16 Mar 2007

5340-12-310-4233

5340-12-341-1733
Mortise Lock

123411733
WRYUG3243: RNCC: 3 | RNVC: 2

3 Aug 1996

5340-12-387-6325
Mechanic Equipment Hardware Kit

123876325
5803755-600030.00: RNCC: 2 | RNVC: 2
5803755-600030.00: RNCC: 5 | RNVC: 2

18 Jan 2012

5340-12-359-0457
Multiple Angle Bracket

123590457
3835240340: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-186-5277
Angle Bracket

121865277
4031590740: RNCC: 3 | RNVC: 2

14 Jan 1981

5340-12-336-6877
Mending Plate

123366877
181083301: RNCC: 2 | RNVC: 2
181083301: RNCC: 3 | RNVC: 2
D 18 108 3301: RNCC: 5 | RNVC: 9
D181083301: RNCC: 5 | RNVC: 9

8 Dec 1994

5340-12-196-8854
Webbing Strap

121968854
0110A100261/1-15: RNCC: 3 | RNVC: 2

29 Aug 1983

5340-12-360-6975
Access Cover

123606975
T991M5006103: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-389-2077
Mending Plate

123892077
1661-183100.033.0: RNCC: 2 | RNVC: 2
1661-183100.033.0: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-353-2164
Webbing Strap

123532164
4377901296: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-133-2951

5340-12-134-8972

5340-12-163-7393
Loop Clamp

121637393
LN9491B20: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-358-6265
Bow Handle

123586265
85970015003: RNCC: 3 | RNVC: 2
85.97001.5003: RNCC: 5 | RNVC: 9

30 Oct 2002

5340-12-180-4683
Webbing Strap

121804683
4357908096: RNCC: 3 | RNVC: 2
4357907396: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-192-9968
Lock-Release Lever

121929968
7100036-500: RNCC: 2 | RNVC: 2
7100036-500: RNCC: 3 | RNVC: 2
7100036-000.07: RNCC: 5 | RNVC: 2
7100036-000.07: RNCC: 5 | RNVC: 2
7100036-000.07: RNCC: 5 | RNVC: 2
7100036-000.07: RNCC: 5 | RNVC: 9
7100036-500: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-146-2199
Resilient Mount

121462199
23114-3508.02: RNCC: 2 | RNVC: 2
DIN95363-D15X15-M5X6-M5X15-NR55: RNCC: 2 | RNVC: 2
0056015001: RNCC: 5 | RNVC: 2
23114-3508.02: RNCC: 5 | RNVC: 2
845.23114-3508.02: RNCC: 5 | RNVC: 2
23114-3508-02: RNCC: 5 | RNVC: 2
23114-3508-02: RNCC: 5 | RNVC: 9
23114-3508-02: RNCC: 5 | RNVC: 9
VG95363-D15X15-M5X6-M5X15-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-385-2917
Dust And Moisture Seal Protective Cap

123852917
81467320019: RNCC: 3 | RNVC: 2
81.46732-0019: RNCC: 5 | RNVC: 2

18 May 2011

5340-12-325-3235
Expansion Plug

123253235
DIN443-B20-ST-A3P: RNCC: 2 | RNVC: 2
DIN443-B20-A6C: RNCC: 5 | RNVC: 9

24 May 1991

5340-12-136-7672
Resilient Mount

121367672
4045040012: RNCC: 3 | RNVC: 2
837-4045040012: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-162-4461
Access Cover

121624461
100356-218200-09: RNCC: 2 | RNVC: 2
100356-218200-09: RNCC: 5 | RNVC: 2
100356-218200.09: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-179-1721
Platte

121791721
5800822-01-008: RNCC: 3 | RNVC: 2
5800822-01.008: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-145-4002
Retaining Strap

121454002
A2-5WN7855: RNCC: 3 | RNVC: 2
A2-5WN7855: RNCC: 3 | RNVC: 2
A2-5WN7855: RNCC: 5 | RNVC: 2

30 May 1969

Load More Results