What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 73 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 73 of 178

5340-12-308-1520
Electrical-Mechanical Equipment Post

123081520
2859070236: RNCC: 3 | RNVC: 2

9 Sep 1986

5340-12-187-5558
Shock Mount Pad

121875558
1093004: RNCC: 2 | RNVC: 2
1093004: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-324-3022
Mounting Bracket

123243022
335948-3402.000: RNCC: 2 | RNVC: 2
335948-3402.000: RNCC: 3 | RNVC: 2
335948-3402.000: RNCC: 5 | RNVC: 9

5 Feb 1991

5340-12-392-3539
Mounting Bracket

123923539
DW 410 996 AX: RNCC: 2 | RNVC: 2
DW 410 996 AX: RNCC: 3 | RNVC: 2
DW 410 996 AX: RNCC: 5 | RNVC: 2

29 May 2013

5340-12-344-3511
Helical Compression Spring Seat

123443511
M546153: RNCC: 3 | RNVC: 9

20 Oct 1997

5340-12-377-3035
Elastic Strap

123773035
4100037-981161.001: RNCC: 2 | RNVC: 2
4100037-981161.001: RNCC: 3 | RNVC: 2
4100037-981161.001: RNCC: 5 | RNVC: 9

6 Jan 2009

5340-12-197-2587
Expansion Plug

121972587
3029970020: RNCC: 3 | RNVC: 2

5 Oct 1983

5340-12-130-8667

5340-12-380-4715
Handwheel

123804715
H02821: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-365-6041
Mounting Bracket

123656041
9408810011: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-360-7087
Support Hook

123607087
000611-223000.10: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-348-0290
Headless Straight Rod

123480290
4256890151: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-380-1051
Mechanical Stop

123801051
9703581742: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-12-387-1080
Mounting Plate

123871080
500180: RNCC: 3 | RNVC: 2
3001: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-12-042-1161

5340-12-317-2209
Mounting Bracket

123172209
2300223-261070.00.0: RNCC: 2 | RNVC: 2
2300223-261070.00.0: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-12-359-1704
Access Cover

123591704
2481-392863.009.0: RNCC: 2 | RNVC: 2
2481-392863.009.0: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-358-6961
Dust And Moisture Seal Protective Cover

123586961
2800-392800.009.0: RNCC: 2 | RNVC: 2
2800-392800.009.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-090-6773

5340-12-042-0582

5340-12-199-7693
Ball Socket Seat

121997693
199.918: RNCC: 3 | RNVC: 2
0009910122: RNCC: 5 | RNVC: 2
199918: RNCC: 5 | RNVC: 2

29 May 1984

5340-12-376-3895
Spring Tension Clip

123763895
1204 6931: RNCC: 3 | RNVC: 2
1204 6931: RNCC: 5 | RNVC: 2

23 Sep 2008

5340-12-391-7089
Mounting Bracket

123917089
I006069: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-187-6193
Nut And Bolt Locking Plate

121876193
5332570073: RNCC: 3 | RNVC: 2

21 Apr 1981

5340-12-179-7746
Retaining Strap

121797746
4355810040: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-022-7104

5340-12-331-6515
Lock-Release Lever

123316515
1647730: RNCC: 3 | RNVC: 2
1647730: RNCC: 5 | RNVC: 2
1647730: RNCC: 5 | RNVC: 9

3 Jun 1993

5340-12-188-5079
Strap Fastener Loop

121885079
T50382: RNCC: 3 | RNVC: 2
T50382: RNCC: 5 | RNVC: 9

15 Jul 1981

5340-12-347-8810
Retaining Clamp Assembly

123478810
2500136-8065.00: RNCC: 2 | RNVC: 2
175135: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-181-1075
Nonmetallic Bumper

121811075
A0022728032: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-349-9083
Mounting Plate

123499083
A1Z10283849: RNCC: 2 | RNVC: 2
A1Z10283849: RNCC: 3 | RNVC: 2
20361624: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-352-7123
Access Cover

123527123
64416339: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-376-6758
Plug Button

123766758
059012256: RNCC: 3 | RNVC: 2

28 Oct 2008

5340-12-197-8477
Angle Bracket

121978477
107304: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-12-336-2552
Dust And Moisture Seal Protective Plug

123362552
37120701: RNCC: 3 | RNVC: 2
37120701-01-4: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-196-9870
Angle Bracket

121969870
A-230129-021: RNCC: 3 | RNVC: 2
A230129-021: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-390-1141
Door Button

123901141
2300559-188150.000.0: RNCC: 2 | RNVC: 2
2300559-188150.000.0: RNCC: 3 | RNVC: 2

8 Oct 2012

5340-12-391-4482
Butt Hinge

123914482
4100094-400370.005.0: RNCC: 2 | RNVC: 2
4100094-400370.005.0: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-177-9909
Electrical-Mechanical Equipment Post

121779909
1121-61702.60: RNCC: 3 | RNVC: 2
1121-61702-60: RNCC: 5 | RNVC: 2

13 Mar 1979

5340-12-378-3935
Dust And Moisture Seal Protective Cap

123783935
MNZ99346: RNCC: 3 | RNVC: 2
450910-9719-000: RNCC: 5 | RNVC: 9
450910-9719: RNCC: 5 | RNVC: 9

1 Apr 2009

5340-12-300-9878
Resilient Mount

123009878
DIN95369-A1-3-M8-M-ST: RNCC: 2 | RNVC: 2
60-100-050 HD-M8: RNCC: 5 | RNVC: 2
C1015 HDS M8: RNCC: 5 | RNVC: 2
151001-M8-HD.ST-50: RNCC: 5 | RNVC: 2
VG95369-A1-3-M8-MVQ-H-ST: RNCC: 5 | RNVC: 9
C1015HDSM8: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-308-3508
Double Angle Bracket

123083508
2300223-149152.00.0: RNCC: 2 | RNVC: 2
2300223-149152.00.0: RNCC: 3 | RNVC: 2

1 Oct 1986

5340-12-134-5404
Stift

121345404
8433964: RNCC: 3 | RNVC: 2
0050144: RNCC: 5 | RNVC: 2
0050-144: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-353-5237
Access Cover

123535237
2500238-042430.000.0: RNCC: 2 | RNVC: 2
2500238-042430.000.0: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-12-311-2953
Metal Runner

123112953
987-111120.00.0: RNCC: 3 | RNVC: 2
987-111120.00.0: RNCC: 5 | RNVC: 9

13 Aug 1987

5340-12-363-3302
Loop Clamp

123633302
DIN3016-1-A1-40X20-W5: RNCC: 2 | RNVC: 2

27 May 2004

5340-12-701-3258
Mounting Bracket

127013258
VG95211-ML-127013258: RNCC: 2 | RNVC: 2
5.12.5102.0011.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-2674
Access Cover

123312674
63 698-001: RNCC: 3 | RNVC: 2
63698-001: RNCC: 5 | RNVC: 2

14 Apr 1993

5340-12-184-8290
Spring Tension Clip

121848290
5801505-311-004: RNCC: 3 | RNVC: 2
5801505-311.004: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-305-0191
Angle Bracket

123050191
5801759-050000.003: RNCC: 2 | RNVC: 2
5801759-050000.003: RNCC: 3 | RNVC: 2
5801759-050000.003: RNCC: 5 | RNVC: 9

17 Sep 1985

5340-12-351-4485
Retaining Strap

123514485
T672M1035210: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-12-372-0882
Rod End Clevis

123720882
8408868: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-12-159-0282
Access Cover

121590282
8380970648: RNCC: 2 | RNVC: 2
8380970648: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-348-8955
Retaining Clip

123488955
1682-381021.000.0: RNCC: 2 | RNVC: 2
1682-381021.000.0: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-382-8723
Hand Carrying Strap Assembly

123828723
2300570-262070.00.0: RNCC: 2 | RNVC: 2
2300570-262070.00.0: RNCC: 3 | RNVC: 2

18 Aug 2010

5340-12-375-1287
Angle Bracket

123751287
L635M1011214: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-335-6746
Mounting Plate

123356746
7801035041: RNCC: 3 | RNVC: 2
78010 35041: RNCC: 5 | RNVC: 9

12 Sep 1994

5340-12-349-7833
Retaining Strap

123497833
T290M2202269: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-318-6407
Nonmetallic Bumper

123186407
856524: RNCC: 3 | RNVC: 9

2 Aug 1989

5340-12-027-3944

5340-12-143-0099

5340-12-044-0075

5340-12-179-7237
Catch Strike

121797237
5941670: RNCC: 3 | RNVC: 2

23 Jul 1979

5340-12-044-4158

5340-12-313-8669
Multiple Angle Bracket

123138669
4355451340: RNCC: 3 | RNVC: 2
435 545 13 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-179-8227
Double Angle Bracket

121798227
81974862957: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-179-5751
Spring Tension Clip

121795751
361803249: RNCC: 3 | RNVC: 2

9 Jul 1979

5340-12-135-6808

5340-12-335-4639
Dust And Moisture Seal Protective Cap

123354639
12007-1: RNCC: 3 | RNVC: 2
423565474: RNCC: 5 | RNVC: 2

19 Aug 1994

5340-12-195-8063
Double Angle Bracket

121958063
160-26693-03: RNCC: 3 | RNVC: 2
160-26693-03: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-123-3171
Support Hook

121233171
5565-10-06-10: RNCC: 3 | RNVC: 2
5565-10-06.10: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-311-0985
Catch Strike

123110985
5801357-4300.09F: RNCC: 2 | RNVC: 2
5801357-4300.09F: RNCC: 3 | RNVC: 2
5801357-4300.09F: RNCC: 5 | RNVC: 9

27 Jul 1987

5340-12-354-5153
Section Block Clamp

123545153
J29120345-003: RNCC: 3 | RNVC: 2

24 Jul 2001

5340-12-307-9337
Resilient Mount Adapter

123079337
00584-10880-20-001: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-332-3258
Angle Bracket

123323258
160-75332-03: RNCC: 3 | RNVC: 2
160-75332-03: RNCC: 5 | RNVC: 9

29 Jul 1993

5340-12-335-4707
Access Cover

123354707
53.1530.015.00: RNCC: 3 | RNVC: 2

22 Aug 1994

5340-12-387-5704
Mounting Plate

123875704
30249865: RNCC: 2 | RNVC: 2
30249865: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-134-5164

5340-12-310-0039
Retaining Strap

123100039
177L31501: RNCC: 3 | RNVC: 2

27 Mar 1987

5340-12-391-5979
Mounting Bracket

123915979
S252M3178105: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-176-7121
Dust And Moisture Seal Protective Cap

121767121
13110042111: RNCC: 3 | RNVC: 9

13 Dec 1978

5340-12-307-3359
Mending Plate

123073359
42035037E5021-68: RNCC: 3 | RNVC: 2

5 Jun 1986

5340-12-342-1565
Angle Bracket

123421565
136M55022: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-179-3022
Mounting Bracket

121793022
3001201: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-323-2467
Mounting Bracket

123232467
6031420240: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-12-340-5456
Mounting Bracket

123405456
5900901441: RNCC: 3 | RNVC: 2
5900901441: RNCC: 5 | RNVC: 2
5900901441: RNCC: 5 | RNVC: 2
590 090 14 41: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-011-6149

5340-12-318-0183
Angle Bracket

123180183
81424030066: RNCC: 3 | RNVC: 2
81.42403.0066: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-376-3200
Access Cover

123763200
BK204880: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-12-349-7872
Mending Plate

123497872
105-62516.05: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-393-4610
Quick Release Plunger

123934610
GN616-M6-SN: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-158-6931

5340-12-326-4281
Metallic Bumper

123264281
2475-9200.05: RNCC: 3 | RNVC: 2

13 Sep 1991

5340-12-321-3695
Door Handle

123213695
7068-41300-000-2: RNCC: 3 | RNVC: 2

10 May 1990

5340-12-178-9133
Angle Bracket

121789133
5560123/3: RNCC: 3 | RNVC: 2
5560123-3: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-375-1437
Butt Hinge

123751437
SK971-182920.000.0: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-12-316-2232
Pipe Bracket

123162232
1616466076-W5: RNCC: 3 | RNVC: 2
67210700: RNCC: 5 | RNVC: 2
1616466076W5: RNCC: 5 | RNVC: 2

2 Jan 1989

5340-12-127-5856
Loop Clamp

121275856
1869950001: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-186-7374
Rigid Caster

121867374
103-220-0116-000: RNCC: 3 | RNVC: 2
1094401-530-02: RNCC: 5 | RNVC: 2
351-002-622530-002-0: RNCC: 5 | RNVC: 9

2 Feb 1981

5340-12-701-7166
Angle Bracket

127017166
VG95211-ML-127017166: RNCC: 2 | RNVC: 2
5.12.7601.8120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-154-9192
Resilient Mount

121549192
DIN95363-A50X40-NR55ST: RNCC: 2 | RNVC: 2
0602-012: RNCC: 5 | RNVC: 2
8405876: RNCC: 5 | RNVC: 2
500044-M10X25-NR55.ST: RNCC: 5 | RNVC: 2
0602012: RNCC: 5 | RNVC: 2
AM4-20-76A31: RNCC: 5 | RNVC: 9
VG95363-A50X40-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-9503
T Bracket

123479503
919338-4002: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-169-2091
Mending Plate

121692091
0880006: RNCC: 3 | RNVC: 2
6090-631: RNCC: 5 | RNVC: 2
6090631: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-316-2236
Pipe Bracket

123162236
1816306159-W5: RNCC: 3 | RNVC: 2
67210740: RNCC: 5 | RNVC: 2
1816306159W5: RNCC: 5 | RNVC: 2

2 Jan 1989

5340-12-338-9607
Dust And Moisture Seal Protective Plug

123389607
81521700013: RNCC: 3 | RNVC: 2
CARP 6: RNCC: 5 | RNVC: 2
81.52170-0013: RNCC: 5 | RNVC: 2

20 Sep 1995

5340-12-192-3147
Butt Hinge

121923147
80004007: RNCC: 3 | RNVC: 2
80004007KZ5511-04: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-172-6661
Angle Bracket

121726661
1224-202.13: RNCC: 2 | RNVC: 2
532008-0283.000: RNCC: 3 | RNVC: 2
532008-0283.000: RNCC: 5 | RNVC: 9
532008-283: RNCC: 5 | RNVC: 9
1224-202-13: RNCC: 5 | RNVC: 9
1224-202.13: RNCC: 5 | RNVC: 9
532008-283: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-340-0584
Mending Plate

123400584
2300042-188150.002: RNCC: 2 | RNVC: 2
2300042-188150.002: RNCC: 3 | RNVC: 2
2300042-188150.002: RNCC: 5 | RNVC: 9
9873297: RNCC: 5 | RNVC: 9

22 Feb 1996

5340-12-136-3693
Webbing Strap

121363693
BUND-ROERO 5340-12-136-3693: RNCC: 3 | RNVC: 2
D2505MITTRAGEGRIFF: RNCC: 5 | RNVC: 2
D2505 MIT TRAGEGRIFF: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-5577
Multiple Angle Bracket

123905577
5804038-202200.02: RNCC: 2 | RNVC: 2

23 Nov 2012

5340-12-186-0335
Angle Bracket

121860335
51974800344: RNCC: 3 | RNVC: 2
51.97480-0344: RNCC: 5 | RNVC: 2

25 Nov 1980

5340-12-349-8210
Nonmetallic Bumper

123498210
46 52 2 325 354: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-335-6527
Metallic Bumper

123356527
6 001 492: RNCC: 3 | RNVC: 2

8 Sep 1994

5340-12-319-8450
Clamping Catch

123198450
2300264-262570.00.0: RNCC: 2 | RNVC: 2
2300264-262570.00.0: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-339-2501
Helical Compression Spring Seat

123392501
04005401: RNCC: 3 | RNVC: 2
04005400: RNCC: 5 | RNVC: 2
04005400.894: RNCC: 5 | RNVC: 2
04005401.894: RNCC: 5 | RNVC: 2

30 Oct 1995

5340-12-353-9302
Dust And Moisture Seal Protective Cap

123539302
08001143: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-179-8392
Mending Plate

121798392
CF 446 478 A: RNCC: 3 | RNVC: 2
CF 446 478 A: RNCC: 5 | RNVC: 2
CF 446 478 A: RNCC: 5 | RNVC: 2
CF446478A: RNCC: 5 | RNVC: 9
CF446478A: RNCC: 5 | RNVC: 9
CF446478A: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-351-0478
Spring Tension Clip

123510478
9165.007.4: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-323-4495
Retaining Band

123234495
3.602.0.977.001.6: RNCC: 3 | RNVC: 2
3.602.0.977.001.6: RNCC: 5 | RNVC: 2
1207 2356: RNCC: 5 | RNVC: 2
3.602.0.977.001.6: RNCC: 5 | RNVC: 9
1207 2356: RNCC: 5 | RNVC: 9

27 Nov 1990

5340-12-349-6409
Dust And Moisture Seal Protective Plug

123496409
52531451393: RNCC: 3 | RNVC: 2
52 53 1 451 393: RNCC: 5 | RNVC: 2

13 Dec 1999

5340-12-357-7963
Handle Grip

123577963
1661-182400.000.0: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-306-0661
Webbing Strap

123060661
5801984-982010.000.0: RNCC: 2 | RNVC: 2
5801984-982010.000.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-331-1614
Access Cover

123311614
28.4.001.0004: RNCC: 3 | RNVC: 2

26 Mar 1993

5340-12-321-4659
Angle Bracket

123214659
1207101: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-356-0731
Manual Control Handle

123560731
2300279-9748.00: RNCC: 2 | RNVC: 2
2300279-9748.00: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-12-376-9647
Mounting Bracket

123769647
6624704742: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-12-313-1471
Mending Plate

123131471
54.0027.581.01: RNCC: 3 | RNVC: 2

8 Mar 1988

5340-12-301-1257
Electronic Equipment Hardware Kit

123011257
5802017-600256.00: RNCC: 2 | RNVC: 2
5802017-600256.00: RNCC: 3 | RNVC: 2

22 Sep 1984

5340-12-164-3720
Resilient Mount

121643720
766019: RNCC: 3 | RNVC: 2
57660190042: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-362-9038
Flush Lock

123629038
108998: RNCC: 3 | RNVC: 2

14 Apr 2004

5340-12-169-1694
Bow Handle

121691694
CF3113830X: RNCC: 3 | RNVC: 2
CF 311 383 -X: RNCC: 5 | RNVC: 2
CF3113830X: RNCC: 5 | RNVC: 2
CF 311 383 -X: RNCC: 5 | RNVC: 2
CF3113830X: RNCC: 5 | RNVC: 2
CF 311 383 -X: RNCC: 5 | RNVC: 2

20 Apr 1977

5340-12-143-3907

5340-12-374-6793
Mounting Plate

123746793
SK971-171225.006.0: RNCC: 3 | RNVC: 2
7097322: RNCC: 5 | RNVC: 2
1728345: RNCC: 5 | RNVC: 2

6 Mar 2008

5340-12-364-4306
Mounting Bracket

123644306
54.1107.404.00: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-353-8154
Multiple Eye Pad

123538154
16001548: RNCC: 3 | RNVC: 2

11 May 2001

5340-12-701-4216
Loop Clamp

127014216
VG95211-ML-127014216: RNCC: 2 | RNVC: 2
5.12.5312.1090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-7567
Plug Button

127027567
50-06101400005: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-192-9113
Hand Crank

121929113
3002CMC103A: RNCC: 3 | RNVC: 2
1700019-103000-00: RNCC: 5 | RNVC: 9
1700019-103000.00: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-156-5453
Dust And Moisture Seal Protective Cap

121565453
42161-13000-09: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-357-2691
Dust And Moisture Seal Protective Cap

123572691
46071-24: RNCC: 3 | RNVC: 2
0005333031: RNCC: 5 | RNVC: 2

28 May 2002

5340-12-197-4061
Mending Plate

121974061
5801813-527000.02: RNCC: 2 | RNVC: 2
5801813-527000-02: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-187-0474
Electrical-Mechanical Equipment Post

121870474
5801338-021-009: RNCC: 3 | RNVC: 2
5801338-021.009: RNCC: 5 | RNVC: 2

25 Feb 1981

5340-12-198-1258
Shock Mount Pad

121981258
1995843: RNCC: 3 | RNVC: 2
995 843: RNCC: 5 | RNVC: 2
4K03-073: RNCC: 5 | RNVC: 2
995 843: RNCC: 5 | RNVC: 9
995843: RNCC: 5 | RNVC: 9
995843: RNCC: 5 | RNVC: 9

22 Dec 1983

5340-12-011-6370

5340-12-360-2713
Double Angle Bracket

123602713
2300458-290030.014: RNCC: 2 | RNVC: 2
2300458-290030.014: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-381-4089
Manual Control Lever

123814089
3500644-579: RNCC: 3 | RNVC: 2
3500644-579: RNCC: 5 | RNVC: 9

10 Feb 2010

5340-12-354-0866
Turnbuckle

123540866
163 205 806: RNCC: 3 | RNVC: 2

1 Jun 2001

5340-12-379-8797
Access Cover

123798797
40214301: RNCC: 3 | RNVC: 2
CV169048: RNCC: 5 | RNVC: 2
40214301: RNCC: 5 | RNVC: 2

9 Sep 2009

5340-12-317-3567
Angle Bracket

123173567
0242 0279: RNCC: 3 | RNVC: 2

31 Mar 1989

5340-12-386-7384
Nut And Bolt Head Protective Cap

123867384
M6 SW10 RUND 86 SCHWARZ: RNCC: 3 | RNVC: 2
06510174: RNCC: 5 | RNVC: 2
CV190615: RNCC: 5 | RNVC: 2
06510174: RNCC: 5 | RNVC: 2

27 Sep 2011

5340-12-319-5840
Helical Compression Spring Seat

123195840
PDP-T103A: RNCC: 3 | RNVC: 2

13 Oct 1989

5340-12-377-2177
Mending Plate

123772177
41269079: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-331-9029
Mounting Bracket

123319029
1757303: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-12-387-4857
Mounting Bracket

123874857
6625205244: RNCC: 3 | RNVC: 2

29 Dec 2011

5340-12-320-7126
Sliding Stay

123207126
9000 2379: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-309-8245
Flush Lock

123098245
6000487: RNCC: 3 | RNVC: 2
061159575: RNCC: 5 | RNVC: 2

6 Mar 1987

5340-12-388-4495
Section Block Clamp

123884495
5849952768: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-388-6162
Mounting Bracket

123886162
5800701140: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-393-9760
Mounting Bracket

123939760
L313M2852101: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-12-316-1514
Loop Clamp

123161514
3134910041: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-371-8186
Access Cover

123718186
1615808083: RNCC: 3 | RNVC: 2

21 May 2007

5340-12-187-5459
Dust And Moisture Seal Protective Plug

121875459
600B890: RNCC: 3 | RNVC: 2
9560128590: RNCC: 5 | RNVC: 2
GPN600B890: RNCC: 5 | RNVC: 2
8813446000: RNCC: 5 | RNVC: 2
GPN600,B890: RNCC: 5 | RNVC: 9
600089000: RNCC: 5 | RNVC: 9
B890: RNCC: 5 | RNVC: 9
B890GPN600: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-325-6241
Angle Bracket

123256241
5801984-983120.001.0: RNCC: 2 | RNVC: 2
5801984-983120.001.0: RNCC: 3 | RNVC: 2

24 Jun 1991

5340-12-376-3253
Access Cover

123763253
BK208138-D: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-12-310-9187
Access Cover

123109187
5056582-2: RNCC: 3 | RNVC: 2
5089703: RNCC: 5 | RNVC: 2

9 Jul 1987

5340-12-381-8365
Section Block Clamp

123818365
JN0413ECD48: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-12-194-6462
Plug Button

121946462
250222-3000.03: RNCC: 2 | RNVC: 2

23 Nov 1982

5340-12-180-0497
Helical Compression Spring Seat

121800497
0287 0879: RNCC: 3 | RNVC: 2
2870879: RNCC: 5 | RNVC: 2
2870879EE0693-60: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-348-6773
Angle Bracket

123486773
2300387-700851.003: RNCC: 2 | RNVC: 2
9914512: RNCC: 3 | RNVC: 2
2300387-700851.003: RNCC: 5 | RNVC: 9
9914512: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-145-8206
Butt Hinge

121458206
1198: RNCC: 3 | RNVC: 9
1198: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-091-7522

5340-12-353-8000
Access Cover

123538000
47125201102: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-026-1976

5340-12-305-0216
Mending Plate

123050216
0214 4902: RNCC: 3 | RNVC: 2
02144902EE0148-63: RNCC: 5 | RNVC: 2

18 Sep 1985

5340-12-140-7911

5340-12-347-7560
Spacing Threaded Standoff

123477560
2300211-206100.018.0: RNCC: 2 | RNVC: 2
2300211-206100.018.0: RNCC: 5 | RNVC: 2

8 Feb 1999

5340-12-316-1513
Retaining Strap

123161513
3099950012: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-315-0736
Metal Runner

123150736
5900046-1200.05: RNCC: 2 | RNVC: 2
21-1200-05: RNCC: 3 | RNVC: 2
21-1200.05: RNCC: 3 | RNVC: 2
5900046-1200.05: RNCC: 3 | RNVC: 2
21-1200-05: RNCC: 5 | RNVC: 9
21-1200.05: RNCC: 5 | RNVC: 9
5900046-1200.05: RNCC: 5 | RNVC: 9
5900046-1200.05: RNCC: 5 | RNVC: 9

14 Sep 1988

5340-12-317-1814
Nonmetallic Bumper

123171814
4606821920: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-352-9374
Helical Compression Spring Seat

123529374
11221720024: RNCC: 3 | RNVC: 2
221.02.009: RNCC: 5 | RNVC: 2

10 Jan 2001

5340-12-359-1948
Spring Tension Clip

123591948
9418110914: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-379-6329
Metallic Solid Wheel

123796329
0533110250: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-330-3457
Mounting Bracket

123303457
6600153-982210.001.0: RNCC: 2 | RNVC: 2
6600153-982210.001.0: RNCC: 3 | RNVC: 2

4 Dec 1992

5340-12-354-8894
Spring Tension Clip

123548894
03.350.20.11.0: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-12-316-2346
Nonmetallic Bumper

123162346
8-9400.17: RNCC: 2 | RNVC: 2
8-9400.17: RNCC: 3 | RNVC: 2
8-9400.17: RNCC: 5 | RNVC: 2
8-9400.17: RNCC: 5 | RNVC: 9
9811770: RNCC: 5 | RNVC: 9

3 Jan 1989

5340-12-394-1181
Section Block Clamp

123941181
06.66010-2001: RNCC: 3 | RNVC: 2
06.66010-2001: RNCC: 5 | RNVC: 2

6 Nov 2013

5340-12-380-5469
Electromagnetic Lock

123805469
1049.10RR: RNCC: 3 | RNVC: 2

6 Nov 2009

5340-12-159-7769
Friction Catch Stud

121597769
1204 304 295: RNCC: 3 | RNVC: 2
0023511813: RNCC: 5 | RNVC: 2
0003221210: RNCC: 5 | RNVC: 2
1204304295: RNCC: 5 | RNVC: 9
3221210: RNCC: 5 | RNVC: 9
0003221210: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-2806
Rod End Connector

127012806
VG95211-ML-127012806: RNCC: 2 | RNVC: 2
5.12.5101.0690.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-189-2051
Turnbuckle

121892051
2300013-1108.00: RNCC: 2 | RNVC: 2
2300013-1108.00: RNCC: 3 | RNVC: 2
87.12.00000.0034.0: RNCC: 3 | RNVC: 2
2300013-1108.00: RNCC: 5 | RNVC: 9
2300013-1108-00: RNCC: 5 | RNVC: 9
2300013-1108.00: RNCC: 5 | RNVC: 9

10 Sep 1981

5340-12-199-7582
Loop Clamp

121997582
DIN3016-1-A1-41X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-41X20-W1-2: RNCC: 3 | RNVC: 2
RS1.41/20: RNCC: 3 | RNVC: 2
RS1100.41/20: RNCC: 5 | RNVC: 2
916016041201: RNCC: 5 | RNVC: 2
BRS41/20N16016: RNCC: 5 | RNVC: 2
4110020041: RNCC: 5 | RNVC: 2
RS1100-41-20: RNCC: 5 | RNVC: 2
VG95931-A41X20-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-41X20-W1-2: RNCC: 5 | RNVC: 9

29 May 1984

5340-12-700-6571
Retaining Strap

127006571
VG95211-ML-127006571: RNCC: 2 | RNVC: 2
5.12.7207.8060.00: RNCC: 3 | RNVC: 2
0501401509579: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-354-8528
Dust And Moisture Seal Protective Cover

123548528
VG95211-ML-123548528: RNCC: 2 | RNVC: 2
P-876428-003: RNCC: 3 | RNVC: 2
P876428-003: RNCC: 5 | RNVC: 2

30 Aug 2001

5340-12-197-3952
Butt Hinge

121973952
DIN7956-32X0,8-30-MS-BK: RNCC: 2 | RNVC: 2
A32DIN7956-MS-MS: RNCC: 5 | RNVC: 2
DIN7956-32X0,8-MS-MS-BK: RNCC: 5 | RNVC: 2
DIN7956-A32-MS-MS: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-358-3299
Buckle

123583299
2500262-192000.003.0: RNCC: 2 | RNVC: 2
2500262-192000.003.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-174-2296
Hinged Hasp

121742296
7882589: RNCC: 3 | RNVC: 2
7882-589: RNCC: 5 | RNVC: 2
1000025-535940: RNCC: 5 | RNVC: 9

15 Jun 1978

5340-12-326-8966
Mounting Bracket

123268966
1280505-17: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-357-4756
Loop Clamp

123574756
D05010: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-12-174-5995
Butt Hinge Leaf

121745995
5610044: RNCC: 3 | RNVC: 2
4068115036: RNCC: 5 | RNVC: 2
34895: RNCC: 5 | RNVC: 2
3054690R91: RNCC: 5 | RNVC: 2

13 Jul 1978

5340-12-340-3993
Dust And Moisture Seal Protective Cap

123403993
244-49021: RNCC: 3 | RNVC: 2
018652: RNCC: 5 | RNVC: 2

4 Apr 1996

5340-12-320-1031
Access Cover

123201031
C249-A15-C116: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-328-7770
Handle Grip

123287770
SK2405-02: RNCC: 3 | RNVC: 2
2490538: RNCC: 5 | RNVC: 2
5000821583: RNCC: 5 | RNVC: 2
SK2405-02: RNCC: 5 | RNVC: 2

23 Jun 1992

5340-12-701-6570
Mounting Bracket

127016570
VG95211-ML-127016570: RNCC: 2 | RNVC: 2
5.12.7208.8011.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-5706
Resilient Mount

123235706
1208 1267: RNCC: 3 | RNVC: 2
12081267KZ0111-47: RNCC: 5 | RNVC: 2
3.602.9.085.042.6: RNCC: 5 | RNVC: 2

7 Dec 1990

5340-12-383-0232
Mounting Bracket

123830232
310464: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-12-342-8082
Mounting Bracket

123428082
4001655018: RNCC: 3 | RNVC: 2
4001015018: RNCC: 5 | RNVC: 2

3 Apr 1997

5340-12-336-9868
Mounting Bracket

123369868
81155010707: RNCC: 3 | RNVC: 2
81.15501.0707: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-389-9847
Mounting Bracket

123899847
X58320200002: RNCC: 3 | RNVC: 2

20 Sep 2012

5340-12-389-0988
Expansion Shield

123890988
565644: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-042-1283

5340-12-183-7238
Loop Clamp

121837238
LN9491A32: RNCC: 2 | RNVC: 2

15 May 1980

5340-12-390-0510
Access Cover

123900510
DF 407 708 BE: RNCC: 3 | RNVC: 2
DF 407 708 BE: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-314-7537
Spring Tension Clip

123147537
55 2346 75: RNCC: 2 | RNVC: 2
55 2346 75: RNCC: 3 | RNVC: 2

6 Aug 1988

5340-12-361-7680
Retaining Band

123617680
00111122: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-352-4377
Loop Clamp

123524377
GLZ9300537P15: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-188-2637
Mounting Bracket

121882637
4312 712 19340: RNCC: 3 | RNVC: 2
431271219340: RNCC: 5 | RNVC: 2
5801685-212000-03: RNCC: 5 | RNVC: 9
5801685-212000.03: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-365-5933
Mounting Bracket

123655933
J53230212-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-343-4679
Mounting Bracket

123434679
5017-153: RNCC: 3 | RNVC: 2
F300 0T 022 4384: RNCC: 6 | RNVC: 9

24 Jun 1997

5340-12-306-7518
Butt Hinge Leaf

123067518
28.06.212-341.86: RNCC: 3 | RNVC: 2
286-212-341-860: RNCC: 5 | RNVC: 2

27 Mar 1986

5340-12-151-6334
Cane Bolt

121516334
61014-50.U18: RNCC: 2 | RNVC: 2
61014-50.U18: RNCC: 3 | RNVC: 2
61014-50U18: RNCC: 5 | RNVC: 2
61014-50U18: RNCC: 5 | RNVC: 9
61014-50.U18: RNCC: 5 | RNVC: 9
61014-50U18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-2652
Angle Bracket

123022652
556-8201200.020: RNCC: 3 | RNVC: 2
4900075-1200-02: RNCC: 5 | RNVC: 9
4900075-1200.02: RNCC: 5 | RNVC: 9

13 Dec 1984

5340-12-323-2230
Angle Bracket

123232230
100016681: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-310-9752
Angle Bracket

123109752
03386400: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-174-2247
Dust And Moisture Seal Protective Cap

121742247
2389101: RNCC: 3 | RNVC: 2
23891: RNCC: 5 | RNVC: 2

15 Jun 1978

5340-12-308-0631
Plug Button

123080631
043101109B: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-12-311-1235
Electronic Equipment Hardware Kit

123111235
S22713-T402: RNCC: 3 | RNVC: 2
S22713-T402: RNCC: 5 | RNVC: 2

28 Jul 1987

5340-12-302-7926
Mending Plate

123027926
2300088-510501.01: RNCC: 2 | RNVC: 2
2300088-510501.01: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-315-4817
Rod End Clevis

123154817
024015001: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-12-185-1752
Hand Crank

121851752
CF205452CX: RNCC: 3 | RNVC: 2
CF 205 452 CX: RNCC: 5 | RNVC: 2
CF 205 452 CX: RNCC: 5 | RNVC: 2
CF205452CX: RNCC: 5 | RNVC: 2

18 Sep 1980

5340-12-389-1366
Webbing Strap

123891366
17578/25FR: RNCC: 3 | RNVC: 2
17578/25FR: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-322-8278
Access Cover

123228278
6735122: RNCC: 2 | RNVC: 2
6735122: RNCC: 3 | RNVC: 2
6735122: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-345-4827
Mounting Bracket

123454827
5.034.321.0: RNCC: 3 | RNVC: 2
5.034.321.0: RNCC: 5 | RNVC: 2
5.034.321: RNCC: 5 | RNVC: 9

24 Mar 1998

5340-12-329-5230
Angle Bracket

123295230
2500229-280000.006.0: RNCC: 2 | RNVC: 2
2500229-280000.006.0: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-12-193-5889
Mounting Plate

121935889
4606200211: RNCC: 3 | RNVC: 2
721 1 64 084 2: RNCC: 3 | RNVC: 9
460 620 02 11: RNCC: 5 | RNVC: 2

9 Aug 1982

5340-12-359-8433
Rod End Clevis

123598433
1868-251211.000.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-145-3003

5340-12-345-8788
Access Cover

123458788
182902: RNCC: 2 | RNVC: 2
182902: RNCC: 3 | RNVC: 2
182902: RNCC: 5 | RNVC: 9

11 May 1998

5340-12-379-9475
Pipe Hanger

123799475
96500016-POS2: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-338-7249
Mending Plate

123387249
2300013-3211.01: RNCC: 2 | RNVC: 2
7900621-00110.01: RNCC: 3 | RNVC: 2
2300013-3211.01: RNCC: 5 | RNVC: 2
2300013-3211.01: RNCC: 5 | RNVC: 9
9910875: RNCC: 5 | RNVC: 9

21 Aug 1995

5340-12-312-0836
Double Angle Bracket

123120836
7-195-0020: RNCC: 3 | RNVC: 2
7-152-0204-16-190: RNCC: 5 | RNVC: 2

17 Nov 1987

5340-12-158-4307
Retaining Strap

121584307
1043145: RNCC: 3 | RNVC: 2
A8SHN78550: RNCC: 5 | RNVC: 2
27-3129-1621: RNCC: 5 | RNVC: 9
WN7855A8VERNICKELT: RNCC: 5 | RNVC: 9
27.3129.1621: RNCC: 5 | RNVC: 9
H78550-A80: RNCC: 5 | RNVC: 9
H78550A80: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-9923
Loop Clamp

127019923
VG95211-ML-127019923: RNCC: 2 | RNVC: 2
155N464-40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-179-2452
Mending Plate

121792452
2486301: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-341-0447
Angle Bracket

123410447
B0532737: RNCC: 3 | RNVC: 2

20 Jul 1996

5340-12-179-8391
Mending Plate

121798391
CF 432 628: RNCC: 3 | RNVC: 2
CF 432 628: RNCC: 5 | RNVC: 2
CF 432 628: RNCC: 5 | RNVC: 2
CF432628: RNCC: 5 | RNVC: 9
CF432628: RNCC: 5 | RNVC: 9
CF432628: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-179-7056
Dust And Moisture Seal Protective Plug

121797056
03312: RNCC: 3 | RNVC: 2
03312: RNCC: 3 | RNVC: 9
PLGA4060010: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-12-188-7777
Double Angle Bracket

121887777
4750245-050: RNCC: 3 | RNVC: 2

29 Jul 1981

5340-12-151-7793
Retaining Strap

121517793
BD7001T914: RNCC: 3 | RNVC: 2
BD7001T914: RNCC: 3 | RNVC: 9
1292001-000148-914: RNCC: 5 | RNVC: 9
1292001-000148.914: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-8466
Angle Bracket

123938466
11.29225-0064: RNCC: 3 | RNVC: 2
11.29225-0064: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-312-6687
Butt Hinge

123126687
3080-0200-14-00: RNCC: 3 | RNVC: 2
308-0200-14-00: RNCC: 5 | RNVC: 2

26 Jan 1988

5340-12-174-0247
Angle Bracket

121740247
2118-989: RNCC: 3 | RNVC: 2
2118989: RNCC: 5 | RNVC: 2

31 May 1978

5340-12-343-4355
Nonmetallic Bumper

123434355
2502995-1000: RNCC: 2 | RNVC: 2
22-320-2E-043: RNCC: 3 | RNVC: 2

20 Jun 1997

5340-12-185-3243
Retaining Strap

121853243
2106-373: RNCC: 3 | RNVC: 2
2106373: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-334-3521
Spacing Threaded Standoff

123343521
VG95148A5XM3X63-AL: RNCC: 2 | RNVC: 2
VG95148-A5XM3X63-AL: RNCC: 3 | RNVC: 2
DI405: RNCC: 3 | RNVC: 9
DI405: RNCC: 5 | RNVC: 2

29 Apr 1994

5340-12-148-4171
Resilient Mount

121484171
DIN95363-C20X25-M8-NR60ST: RNCC: 2 | RNVC: 2
520013-M8.NR60.ST: RNCC: 5 | RNVC: 2
0602-024: RNCC: 5 | RNVC: 2
0602024: RNCC: 5 | RNVC: 2
8405880: RNCC: 5 | RNVC: 2
VG95363-C20X25-M8-NR60ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-5136
Mending Plate

121975136
V22.918.111140-03: RNCC: 3 | RNVC: 2
V22-918-111140-03: RNCC: 5 | RNVC: 2

27 Oct 1983

5340-12-375-5526
Mounting Plate

123755526
L311M3815101: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-12-372-6066
Flush Lock

123726066
210.41.603: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-12-324-2043
Mounting Bracket

123242043
54.2544.302.32: RNCC: 2 | RNVC: 2
54.2544.302.32: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-12-382-3810
Catch Strike

123823810
TYP7294062: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-315-1116
Retaining Strap

123151116
5559952368: RNCC: 3 | RNVC: 2
5559952368: RNCC: 5 | RNVC: 2
5559952368: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-311-6896
Access Cover

123116896
287968: RNCC: 3 | RNVC: 2
287968: RNCC: 5 | RNVC: 9

6 Oct 1987

5340-12-377-8578
Angle Bracket

123778578
41230321: RNCC: 3 | RNVC: 2

17 Feb 2009

5340-12-362-9467
Loop Clamp

123629467
071555100502: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-12-383-3633
Mounting Plate

123833633
7 009 515 203: RNCC: 3 | RNVC: 2
204169: RNCC: 5 | RNVC: 2

12 Oct 2010

5340-12-337-7688
Double Angle Bracket

123377688
4606891114: RNCC: 3 | RNVC: 2
S 721 1 87 228 1: RNCC: 3 | RNVC: 9
460 689 11 14: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-12-150-6723
S Sicherungsplatte

5340-12-147-1384
Loop Clamp

121471384
14TAN15801-1-4544-9: RNCC: 3 | RNVC: 2
10N14TAN15801: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-382-6587
Bumper

123826587
7509: RNCC: 3 | RNVC: 2

21 Jul 2010

5340-12-389-1673
Double Angle Bracket

123891673
2300588-250509.002: RNCC: 2 | RNVC: 2
2300588-250509.002: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-318-9018
Webbing Strap

123189018
4607900596: RNCC: 3 | RNVC: 2
460 790 05 96 61 44: RNCC: 5 | RNVC: 9

24 Aug 1989

5340-12-334-3188
Access Cover

123343188
7004461: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-12-350-3586
Extension Drawer Slide

123503586
30230-400: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-358-3499
Shimmy Damper

123583499
62216011: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-311-1128
Mending Plate

123111128
2300074-5891.03: RNCC: 2 | RNVC: 2
2300074-5891.03: RNCC: 3 | RNVC: 2
2300074-5891.03: RNCC: 5 | RNVC: 9

28 Jul 1987

5340-12-300-2711
Mending Plate

123002711
A11A151042211: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-389-4473
Handwheel

123894473
M13053: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-354-8315
Dust And Moisture Seal Protective Cap-Plug

123548315
024.02.100.3.100: RNCC: 3 | RNVC: 2
024.02.100: RNCC: 5 | RNVC: 9

29 Aug 2001

5340-12-348-2210
Dust And Moisture Seal Protective Cap

123482210
1048 304 035: RNCC: 3 | RNVC: 2
1048304035: RNCC: 5 | RNVC: 9

10 May 1999

5340-12-702-1663
Angle Bracket

127021663
VG95211-ML-127021663: RNCC: 2 | RNVC: 2
30.7100.1280: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-130-9019
Buckle

121309019
DIN5291-25-ST-VERZINKT: RNCC: 2 | RNVC: 2
25DIN5291STVERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-8494
Nonmetallic Bumper

121968494
588.70-100006-004: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-185-4395
Bow Handle

121854395
VG95149B90X20X7XM3GAL-FB: RNCC: 2 | RNVC: 2
10501-002: RNCC: 3 | RNVC: 2
238658-0105: RNCC: 5 | RNVC: 2
1047647: RNCC: 5 | RNVC: 2
5L3731-001-36: RNCC: 5 | RNVC: 2
238658-0105: RNCC: 5 | RNVC: 9

7 Oct 1980

5340-12-337-2330
Lock-Release Lever

123372330
NO PRIMARY REF 12-337-2330: RNCC: 3 | RNVC: 2
23-300.100.04: RNCC: 5 | RNVC: 9

6 Feb 1995

5340-12-316-7945
Mounting Bracket

123167945
5803471-201322.00: RNCC: 2 | RNVC: 2
65.7789.426.00-A001: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-12-393-8726
Mounting Bracket

123938726
11.29225-0017: RNCC: 3 | RNVC: 2
11.29225-0017: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-12-333-3469
Hand Crank

123333469
DIN468-F125X14-GT/FS: RNCC: 2 | RNVC: 2
F125X14DIN468-GT/FS: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-12-169-3144
Nonmetallic Bumper

121693144
02708: RNCC: 3 | RNVC: 2
02708: RNCC: 5 | RNVC: 9

4 May 1977

5340-12-358-1985
Mounting Bracket

123581985
3465420040: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-389-4438
Loop Clamp

123894438
32322-51: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-384-2791
Butt Hinge

123842791
224-9101: RNCC: 3 | RNVC: 2
FX0389: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-12-301-7301
Flare Lock Fastener

123017301
81906850185: RNCC: 3 | RNVC: 2
81.90685.0185: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-042-2487

5340-12-366-2958
Mechanical Stop

123662958
104185: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-319-7713
Nonmetallic Bumper

123197713
64 035 017A: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-12-314-1628
Double Angle Bracket

123141628
4354266940: RNCC: 3 | RNVC: 2
435 426 69 40: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-125-2058

5340-12-359-6034
Mounting Bracket

123596034
9432680640: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-362-3081
Loop Clamp

123623081
LN9490BM45: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-197-2057
Support Hook

121972057
3522231641: RNCC: 3 | RNVC: 2
3522231641: RNCC: 5 | RNVC: 2
A3522231641: RNCC: 5 | RNVC: 2

29 Sep 1983

5340-12-314-1780
Retaining Strap

123141780
151-13018: RNCC: 3 | RNVC: 2
RA-3: RNCC: 5 | RNVC: 2
RA3: RNCC: 5 | RNVC: 2

15 Jun 1988

5340-12-190-3713
Metal Runner

121903713
1881760: RNCC: 3 | RNVC: 2
75E10.34.55-2: RNCC: 5 | RNVC: 2
75E10-34-55-2: RNCC: 5 | RNVC: 9

24 Nov 1981

5340-12-170-2651
Plug Button

121702651
C44165-A24-C162: RNCC: 3 | RNVC: 2
C44165A24C162: RNCC: 5 | RNVC: 2

7 Jul 1977

5340-12-172-9989
Resilient Mount

121729989
2-22-000069-01: RNCC: 3 | RNVC: 9
0009888610: RNCC: 5 | RNVC: 2
2-49-22-0188-10: RNCC: 5 | RNVC: 9

13 Mar 1978

5340-12-329-6247
Loop Clamp

123296247
DIN3015-Z-KP-4-G-28-25-PP: RNCC: 2 | RNVC: 2
RBPG-428/25: RNCC: 3 | RNVC: 2
DS428/25PPH: RNCC: 3 | RNVC: 2
7014419: RNCC: 5 | RNVC: 2
RBPG-428/25: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-12-192-4226
Sealing Plug Assembly

121924226
11 203 00: RNCC: 3 | RNVC: 2
11-203-00: RNCC: 5 | RNVC: 2
4-4-411-203-5: RNCC: 5 | RNVC: 2
4-4-411-203-00: RNCC: 5 | RNVC: 2

22 Apr 1982

5340-12-360-0371
Mounting Bracket

123600371
2500261-180310.001.0: RNCC: 2 | RNVC: 2
2500261-180310.001.0: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-321-4583
Angle Bracket

123214583
P-886763-405: RNCC: 3 | RNVC: 2
P886763-405: RNCC: 5 | RNVC: 2

22 May 1990

5340-12-198-6838
Spring Tension Clip

121986838
2NO8/251: RNCC: 3 | RNVC: 2
2-81251: RNCC: 5 | RNVC: 2
2N08/251: RNCC: 5 | RNVC: 2

17 Feb 1984

5340-12-702-5551
Angle Bracket

127025551
VG95211-ML-127025551: RNCC: 2 | RNVC: 2
5.51.7226.0000.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7789
Angle Bracket

127017789
VG95211-ML-127017789: RNCC: 2 | RNVC: 2
5.12.7800.2000.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-304-1776
Loop Clamp

123041776
WN 414 25-110-ST: RNCC: 3 | RNVC: 2
WN 414 25-110-ST: RNCC: 5 | RNVC: 9
WN41425-110-ST: RNCC: 5 | RNVC: 9

20 Jun 1985

5340-12-134-0937
Stift

121340937
5167-26-04-11: RNCC: 3 | RNVC: 2
5167-26-04.11: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-360-0404
Quick Release Plunger

123600404
07110-10512: RNCC: 3 | RNVC: 2
NLM07110-10512: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-12-193-5957
Loop Clamp

121935957
SP186/15SZW1: RNCC: 3 | RNVC: 2
01410000186: RNCC: 5 | RNVC: 2
HB186/15: RNCC: 5 | RNVC: 9
5600015186: RNCC: 5 | RNVC: 9
HB186-15: RNCC: 5 | RNVC: 9

9 Aug 1982

5340-12-323-2640
Angle Bracket

123232640
6031400042: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-12-324-7082
Bridge Clamp

123247082
52820-W21.04: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-330-1542
Access Cover

123301542
10435902: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-12-315-7268
Nonmetallic Bumper

123157268
300074: RNCC: 3 | RNVC: 2
4-V6241: RNCC: 5 | RNVC: 2
13.4.1346BPOS3: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-384-8311
Sliding Block

123848311
1.31.FM4: RNCC: 3 | RNVC: 2

1 Apr 2011

5340-12-316-4013
Angle Bracket

123164013
5800044-9490.03: RNCC: 2 | RNVC: 2
5800044-9490.03: RNCC: 3 | RNVC: 2

16 Jan 1989

5340-12-316-1544
Access Cover

123161544
3852680357: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-316-7123
Rod End Clevis

123167123
6380536: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-301-0299
Dust And Moisture Seal Protective Cap

123010299
1423-311.06(4): RNCC: 3 | RNVC: 2

19 Sep 1984

5340-12-300-8552
Angle Bracket

123008552
1513-910.22(5): RNCC: 3 | RNVC: 2

5 Sep 1984

5340-12-300-9173
Angle Bracket

123009173
1423-850.09(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-358-9308
Dust And Moisture Seal Protective Plug

123589308
2500262-394282.002.0: RNCC: 2 | RNVC: 2
2500262-394282.002.0: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-197-8139
Door Closer

121978139
11043 0 001: RNCC: 3 | RNVC: 2
0007661617: RNCC: 5 | RNVC: 2
110430001: RNCC: 5 | RNVC: 2
11043.0.001: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-701-8238
Rod End Clevis

127018238
5.83.0253.1006.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-7644
Nonmetallic Bumper

123497644
60 49 935: RNCC: 3 | RNVC: 2
E834066 S: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-306-3378
Angle Bracket

123063378
5801984-984200.002.0: RNCC: 2 | RNVC: 2
5801984-984200.002.0: RNCC: 3 | RNVC: 2

20 Feb 1986

5340-12-348-6359
Manual Control Handle

123486359
0.052.404.0: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-337-7697
Loop Clamp

123377697
4607920040: RNCC: 3 | RNVC: 2
721 1 77 119 1: RNCC: 3 | RNVC: 9
S 721 1 77 119 1: RNCC: 5 | RNVC: 9

10 Apr 1995

5340-12-368-6341
Butt Hinge

123686341
00044 150 Z: RNCC: 3 | RNVC: 2
44 150: RNCC: 5 | RNVC: 2

31 Mar 2006

5340-12-302-6153
Loop Clamp

123026153
YK03410496: RNCC: 3 | RNVC: 2
03410496: RNCC: 5 | RNVC: 9
H.B.913SV 1056 1975 03 41 0496: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-389-3706
Retaining Bail

123893706
10222-181740.001.0: RNCC: 2 | RNVC: 2
10222-181740.001.0: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-12-168-2784
Loop Clamp

121682784
LN9491B9: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-384-4257
Mounting Plate

123844257
1092204: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-300-7047
Nonmetallic Bumper

123007047
0009876740: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-353-6527
Manual Control Lever

123536527
09419629: RNCC: 3 | RNVC: 2
R900419629: RNCC: 5 | RNVC: 2
R1236150: RNCC: 5 | RNVC: 2
419629: RNCC: 5 | RNVC: 9

23 Apr 2001

5340-12-385-4998
Access Cover

123854998
Z=2.201029: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-323-1543
Extension Drawer Slide

123231543
GC-201-1421: RNCC: 3 | RNVC: 2

29 Oct 1990

5340-12-198-2672
Butt Hinge Leaf

121982672
23302-182531.03: RNCC: 2 | RNVC: 2
2659261: RNCC: 3 | RNVC: 2
2808343EC7103-17: RNCC: 5 | RNVC: 2
23302-182531.03: RNCC: 5 | RNVC: 9
2808343EC7103-17: RNCC: 5 | RNVC: 9

6 Jan 1984

5340-12-333-8846
Mounting Bracket

123338846
405-11: RNCC: 3 | RNVC: 2

21 Feb 1994

5340-12-344-4879
Hand Crank

123444879
JS1113-204: RNCC: 3 | RNVC: 2
270455: RNCC: 5 | RNVC: 2

3 Nov 1997

5340-12-176-2791
Webbing Strap

121762791
23290-151089: RNCC: 2 | RNVC: 2
23290-151089: RNCC: 3 | RNVC: 2
23290-151089: RNCC: 5 | RNVC: 2
23290-151089: RNCC: 5 | RNVC: 9
23290-151089: RNCC: 5 | RNVC: 9
000-B2-25X2,5X290-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-700-5564
Flush Lock

127005564
VG95211-ML-127005564: RNCC: 2 | RNVC: 2
40 OST1 10093-71: RNCC: 3 | RNVC: 2
0500830001090: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-12-338-7510
Dust And Moisture Seal Protective Plug

123387510
00805160: RNCC: 3 | RNVC: 2
21-03.34: RNCC: 5 | RNVC: 2

22 Aug 1995

5340-12-333-8490
Runner

123338490
532104-0242.000: RNCC: 2 | RNVC: 2
532104-0242.000: RNCC: 3 | RNVC: 2
532104-0242.000: RNCC: 5 | RNVC: 9

17 Feb 1994

5340-12-378-3371
Mounting Plate

123783371
41259017: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-339-7669
Mounting Plate

123397669
3664: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-12-325-4217
Nonmetallic Bumper

123254217
7633 040 375: RNCC: 3 | RNVC: 2
7633040375: RNCC: 5 | RNVC: 2
7633040375: RNCC: 5 | RNVC: 9

6 Jun 1991

5340-12-314-8371
Double Angle Bracket

123148371
1301335110: RNCC: 3 | RNVC: 2

17 Aug 1988

5340-12-344-3484
Double Angle Bracket

123443484
81252450140: RNCC: 3 | RNVC: 2
81.25245.0140: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-356-7486
Headless Straight Rod

123567486
T622M1302101: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-317-0208
Nonmetallic Bumper

123170208
6213230085: RNCC: 3 | RNVC: 2

3 Mar 1989

5340-12-353-0374
Angle Bracket

123530374
54.0084.612.08: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-12-393-2943
Double Angle Bracket

123932943
5801305413: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-369-9264
Nonmetallic Bumper

123699264
37073: RNCC: 3 | RNVC: 2
037073: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-12-313-1603
Friction Catch Stud

123131603
1545328: RNCC: 3 | RNVC: 2
0852.516.00.00.090: RNCC: 5 | RNVC: 2

9 Mar 1988

5340-12-382-7181
Lock Bar

123827181
5300.270.000.000: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-12-025-8370

5340-12-324-6497
Access Cover

123246497
100016685: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-090-4235

5340-12-199-1275
Lock-Release Lever

121991275
1868330040: RNCC: 3 | RNVC: 2

28 Mar 1984

5340-12-025-8851

5340-12-392-5897
Mounting Plate

123925897
M2557426622000: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-382-8378
Angle Bracket

123828378
10113-910000.003.0: RNCC: 2 | RNVC: 2
10113-910000.003.0: RNCC: 3 | RNVC: 2

13 Aug 2010

5340-12-376-7265
Pipe Hanger

123767265
111L10502/1: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-12-195-1325
Electrical-Mechanical Equipment Post

121951325
023-140000-32-0: RNCC: 3 | RNVC: 2

17 Jan 1983

5340-12-305-0868
Retaining Strap

123050868
B61.7.1/7.4: RNCC: 3 | RNVC: 2

25 Sep 1985

5340-12-302-6162
Split Tubular Clip

123026162
YK03300513: RNCC: 3 | RNVC: 2
03300513: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 30 0513: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-305-3210
Access Cover

123053210
84500 27209: RNCC: 2 | RNVC: 2
8450027209: RNCC: 3 | RNVC: 2
84500 27209: RNCC: 5 | RNVC: 9

22 Oct 1985

5340-12-360-0065
Mounting Bracket

123600065
9415406173: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-151-8895
Webbing Strap

121518895
4048900094: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-8756
Nonmetallic Solid Wheel

123288756
2653-330200.02: RNCC: 2 | RNVC: 2
2653-330200.02: RNCC: 3 | RNVC: 2
2653-330200.02: RNCC: 5 | RNVC: 9

27 Jun 1992

5340-12-151-8922
Nonmetallic Bumper

121518922
113E296: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-320-6593
Angle Bracket

123206593
46711457392: RNCC: 3 | RNVC: 2
1457392: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-305-5189
Retaining Strap

123055189
81974450100: RNCC: 3 | RNVC: 2
81.97445.0100: RNCC: 5 | RNVC: 2

18 Nov 1985

5340-12-195-0793
Retaining Strap

121950793
1044214-VERZINKT: RNCC: 3 | RNVC: 2
B12SN78550-STVZK: RNCC: 5 | RNVC: 2
H78550-B120-S3: RNCC: 5 | RNVC: 2
SN78550-B12-ST-A3G-F: RNCC: 5 | RNVC: 2
WN7855/B-12MM-VERZINKT: RNCC: 5 | RNVC: 2
B12SN78550STA3G: RNCC: 5 | RNVC: 2
B12SN78550STVZK: RNCC: 5 | RNVC: 2

11 Jan 1983

5340-12-154-4549
Nut And Bolt Locking Plate

121544549
03433888: RNCC: 3 | RNVC: 2
3433888EE5091-11: RNCC: 5 | RNVC: 2
5176-11-05-02: RNCC: 5 | RNVC: 2
5176-11-05.02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-360-3770
Mechanical Stop

123603770
4149 306 128: RNCC: 3 | RNVC: 2
0-124724: RNCC: 8 | RNVC: 2
1PA39630-124724: RNCC: 8 | RNVC: 2

15 May 2003

5340-12-307-6759
Double Angle Bracket

123076759
1218 9331: RNCC: 3 | RNVC: 2
6.226.9.650.015.4: RNCC: 5 | RNVC: 9
6-226-9-650-015-4: RNCC: 5 | RNVC: 9
12189331: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-173-0747
Retaining Band

121730747
HB4114.67/15: RNCC: 3 | RNVC: 2
HB4114-067-15: RNCC: 5 | RNVC: 2
HB4114-067-15VZK: RNCC: 5 | RNVC: 2
HB4114-67-15: RNCC: 5 | RNVC: 2
560-4114-067: RNCC: 5 | RNVC: 2
5604114067: RNCC: 5 | RNVC: 2

20 Mar 1978

5340-12-193-9405
Lock-Release Lever

121939405
6040 080 LINKS: RNCC: 3 | RNVC: 2
6.040.080.00: RNCC: 5 | RNVC: 2
MZA B0 03: RNCC: 5 | RNVC: 2
6022 LINKS VERZINKT: RNCC: 5 | RNVC: 2
6040 080: RNCC: 5 | RNVC: 2
6022 VERZINKT LINKS: RNCC: 5 | RNVC: 2
2500107-192300.000.0: RNCC: 5 | RNVC: 9
6.040.006.00: RNCC: 5 | RNVC: 9

16 Sep 1982

5340-12-330-2130
Electrical-Mechanical Equipment Post

123302130
536077-0734.000: RNCC: 2 | RNVC: 2
536077-0734.000: RNCC: 3 | RNVC: 2
536077-0734.000: RNCC: 5 | RNVC: 9

14 Nov 1992

5340-12-368-5059
Multiple Angle Bracket

123685059
J21220132-005: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-12-320-5589
Electrical-Mechanical Equipment Post

123205589
VG95211-ML-123205589: RNCC: 2 | RNVC: 2
10539-02: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-12-326-6481
Dust And Moisture Seal Protective Cap

123266481
81964100427: RNCC: 3 | RNVC: 2
81.96410-0569: RNCC: 5 | RNVC: 2
81964100569: RNCC: 5 | RNVC: 2
0501 305 862: RNCC: 5 | RNVC: 2
0501305862: RNCC: 5 | RNVC: 2

17 Oct 1991

5340-12-176-2488
Access Cover

121762488
23302-182110.10: RNCC: 2 | RNVC: 2
2651-323: RNCC: 3 | RNVC: 2
2651323: RNCC: 5 | RNVC: 2
23302-182110-10: RNCC: 5 | RNVC: 9
23302-182110.10: RNCC: 5 | RNVC: 9

23 Nov 1978

5340-12-303-6206
Nonmetallic Bumper

123036206
704-121415-902-0: RNCC: 3 | RNVC: 2

15 Apr 1985

5340-12-178-1313
Loop Clamp

121781313
81953120002: RNCC: 3 | RNVC: 2
81.95312-0002: RNCC: 5 | RNVC: 2
036-0030-054-020: RNCC: 5 | RNVC: 2
0360030054020: RNCC: 5 | RNVC: 2
50155903: RNCC: 5 | RNVC: 2
036 000 005 018: RNCC: 5 | RNVC: 2

22 Mar 1979

5340-12-326-8454
Webbing Strap

123268454
272.346 187: RNCC: 2 | RNVC: 2
272.346.187: RNCC: 3 | RNVC: 2
8708074-101: RNCC: 5 | RNVC: 9
272.346 187: RNCC: 5 | RNVC: 9

4 Nov 1991

5340-12-365-5167
Strap Fastener Loop

123655167
01201/J: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-12-321-9655
Butt Hinge

123219655
4637200037: RNCC: 3 | RNVC: 2

12 Jul 1990

5340-12-135-6812

5340-12-393-6677
Mounting Plate

123936677
4100098-982405.006.0: RNCC: 2 | RNVC: 2
4100098-982405.006.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-383-1870
Support Hook

123831870
121W168220.006.0: RNCC: 2 | RNVC: 2
121W168220.006.0: RNCC: 3 | RNVC: 2
1921448: RNCC: 5 | RNVC: 2

23 Sep 2010

5340-12-393-4310
Angle Bracket

123934310
4100098-722020.001.0: RNCC: 2 | RNVC: 2
4100098-722020.001.0: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-12-365-3501
Double Angle Bracket

123653501
2300109-970497.001.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-180-9007
Dust And Moisture Seal Protective Plug

121809007
700M16: RNCC: 3 | RNVC: 2
GPN700M16: RNCC: 5 | RNVC: 2
700001600: RNCC: 5 | RNVC: 9
AM16: RNCC: 5 | RNVC: 9
AM16GPN700: RNCC: 5 | RNVC: 9
GPN700,M16 FORM A: RNCC: 5 | RNVC: 9
GPN700AM16: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-328-6930
Support Hook

123286930
2300232-974000.004.0: RNCC: 2 | RNVC: 2
2300232-974000.004.0: RNCC: 3 | RNVC: 2

16 Jun 1992

5340-12-393-3794
Mounting Bracket

123933794
4100094-982217.000.0: RNCC: 2 | RNVC: 2
4100094-982217.000.0: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-12-315-3586
Access Cover

123153586
2507-350500.001.0: RNCC: 2 | RNVC: 2
2507-350500.001.0: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-12-164-5288
Metal Runner

121645288
6 110 304 129: RNCC: 3 | RNVC: 2
6110304129: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-5837
Dust And Moisture Seal Protective Cap

123185837
7720.0.07: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-357-6240
Dust And Moisture Seal Protective Cap

123576240
0018602169: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-302-1504
Strap Fastener Loop

123021504
183871677B: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-321-6522
Lock-Release Lever

123216522
287713: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-176-4918
Butt Hinge Leaf

121764918
WW 306 062 BR: RNCC: 2 | RNVC: 2
WW 306 062 BR: RNCC: 3 | RNVC: 9
WW 306 062 AR: RNCC: 5 | RNVC: 2
WW306062AR: RNCC: 5 | RNVC: 2
WW 306 062 BR: RNCC: 5 | RNVC: 2
WW 306 062 AR: RNCC: 5 | RNVC: 9
WW306062AR: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-164-8129
Retaining Strap

121648129
160-740206: RNCC: 3 | RNVC: 2
160-740206: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-4491
Retaining Strap

123214491
A11B272450201: RNCC: 3 | RNVC: 2

21 May 1990

5340-12-318-5847
Double Angle Bracket

123185847
4356647432: RNCC: 3 | RNVC: 2
4356647432: RNCC: 3 | RNVC: 9

31 Jul 1989

5340-12-364-8969
Mounting Bracket

123648969
2996.74.33: RNCC: 3 | RNVC: 2

12 Nov 2004

5340-12-360-3517
Spring Tension Clip

123603517
0009502209: RNCC: 3 | RNVC: 2
0009502209: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-340-9889
Mounting Plate

123409889
20-7210-126: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-12-321-3098
Mounting Plate

123213098
2500067-102400.14: RNCC: 2 | RNVC: 2
2500067-102400.14: RNCC: 3 | RNVC: 2

3 May 1990

5340-12-178-7819
Electrical-Mechanical Equipment Post

121787819
10449-01: RNCC: 3 | RNVC: 2
477111: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-183-6375
Mounting Bracket

121836375
C200ZZ18203-000: RNCC: 3 | RNVC: 2

6 May 1980

5340-12-351-4631
Angle Bracket

123514631
6552070800: RNCC: 3 | RNVC: 2

29 Jul 2000

5340-12-182-9795
Angle Bracket

121829795
81974850415: RNCC: 3 | RNVC: 2

11 Mar 1980

5340-12-353-4450
Mechanical Stop

123534450
T531M0534201: RNCC: 3 | RNVC: 2

23 Mar 2001

5340-12-325-7187
Double Angle Bracket

123257187
3661870240: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-351-4012
Metallic Bumper

123514012
10063-531000.01: RNCC: 3 | RNVC: 2
10063-531000.01: RNCC: 5 | RNVC: 9

24 Jul 2000

5340-12-330-0931
Butt Hinge Leaf

123300931
272.309 830: RNCC: 2 | RNVC: 2
272.309.830: RNCC: 3 | RNVC: 2
272.309 830: RNCC: 5 | RNVC: 9

31 Oct 1992

5340-12-351-3233
Mounting Bracket

123513233
2500113-5300: RNCC: 2 | RNVC: 2
2500113-5300: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-372-8026
Lock-Release Lever

123728026
856776: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-12-040-6970

5340-12-300-2788
Dust And Moisture Seal Protective Plug

123002788
3099870244: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-378-9012
Webbing Strap

123789012
7849016015AB: RNCC: 3 | RNVC: 2

27 May 2009

5340-12-376-2246
Cremone Bolt

123762246
10065007: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-12-328-9610
Angle Bracket

123289610
272.332 394: RNCC: 2 | RNVC: 2
272.332.394: RNCC: 3 | RNVC: 2
272.332 394: RNCC: 5 | RNVC: 9

3 Jul 1992

5340-12-362-1678
Loop Clamp

123621678
00442665: RNCC: 3 | RNVC: 2

19 Jan 2004

5340-12-320-1351
Rod End Clevis

123201351
0526401: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-364-0045
Retaining Strap

123640045
700325022200: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-167-3015
Loop Clamp

121673015
C89: RNCC: 3 | RNVC: 2

14 Dec 1976

5340-12-378-9720
Mounting Bracket

123789720
83110722: RNCC: 3 | RNVC: 2

5 Jun 2009

5340-12-167-3086
Loop Clamp

121673086
23290-041212: RNCC: 2 | RNVC: 2

14 Dec 1976

5340-12-347-5909
Retaining Clip

123475909
215469: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-12-378-3858
Mounting Bracket

123783858
0000596541: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-358-0252
Expansion Shield

123580252
165827592: RNCC: 3 | RNVC: 2
165 827 592: RNCC: 5 | RNVC: 9

3 Sep 2002

5340-12-345-4975
Spring Tension Clip

123454975
1H0711558: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-12-333-2132
Friction Catch Stud Receptacle

123332132
0019880942: RNCC: 3 | RNVC: 2
UCXA-952: RNCC: 5 | RNVC: 9

10 Nov 1993

5340-12-365-5839
Angle Bracket

123655839
J28230122-002: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-393-7719
Dust And Moisture Seal Protective Cover

123937719
F1.1289-00-12-01.00-08: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-342-1632
Mounting Plate

123421632
6700018-201700.03: RNCC: 2 | RNVC: 2
6700018-201700.03: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-189-0561
Detent Plunger

121890561
5801433-045000.01.0: RNCC: 3 | RNVC: 2
5801433-045000-01-0: RNCC: 5 | RNVC: 2
5801433-045000-01-0: RNCC: 5 | RNVC: 9
5801433-045000.01.0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-703-3052
Mounting Bracket

127033052
VG95211-ML-127033052: RNCC: 2 | RNVC: 2
5.12.0430.8050.00: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-198-5092
Loop Clamp

121985092
DIN3016-1-A1-46X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-46X15-W1-2: RNCC: 3 | RNVC: 2
RS1.46/15: RNCC: 3 | RNVC: 2
15210036: RNCC: 5 | RNVC: 2
4110015046: RNCC: 5 | RNVC: 2
RS1100.46/15: RNCC: 5 | RNVC: 2
DIN3016-A1-46X15-W1-2: RNCC: 5 | RNVC: 9
DIN3016-A46X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-A46X15-W1: RNCC: 5 | RNVC: 9

3 Feb 1984

5340-12-358-7869
Mounting Bracket

123587869
3805800090: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-166-7296
Resilient Mount

121667296
DIN95363-B20X25-M6X15-NR55ST: RNCC: 2 | RNVC: 2
510018-M6X15-NR55.ST: RNCC: 5 | RNVC: 2
60222: RNCC: 5 | RNVC: 2
81110-20X25-M6X15.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-B20X25-M6X15-NR55ST: RNCC: 5 | RNVC: 9
AE5-46-25N: RNCC: 5 | RNVC: 9
AE5.46/25N: RNCC: 5 | RNVC: 9

12 Oct 1976

5340-12-306-0130
Retaining Strap

123060130
2505402: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-325-5929
Resilient Mount

123255929
5372230812: RNCC: 3 | RNVC: 2

20 Jun 1991

5340-12-326-9632
Access Cover

123269632
5502300104: RNCC: 3 | RNVC: 2
5502300104: RNCC: 5 | RNVC: 2
5502300104: RNCC: 5 | RNVC: 2
5502300104: RNCC: 5 | RNVC: 2

14 Nov 1991

5340-12-338-5413
Mounting Bracket

123385413
SP06723: RNCC: 3 | RNVC: 2
50.4.483.0001: RNCC: 5 | RNVC: 9

25 Jul 1995

5340-12-307-9469
Strap Fastener Loop

123079469
8-4254.00: RNCC: 2 | RNVC: 2
8-4254.00: RNCC: 3 | RNVC: 2
8-4254.00: RNCC: 5 | RNVC: 9
9859227: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-321-7660
Dust And Moisture Seal Protective Cap

123217660
800M42X2: RNCC: 3 | RNVC: 2
GPN800,M42X2 FORM A: RNCC: 5 | RNVC: 2
800M42X200: RNCC: 5 | RNVC: 2
779009977: RNCC: 5 | RNVC: 2

25 Jun 1990

5340-12-197-0225
Dust And Moisture Seal Protective Plug

121970225
7454.0: RNCC: 3 | RNVC: 2

12 Sep 1983

5340-12-121-0398
Krampe Mit Platte

5340-12-139-7014
An Scharnierlappen

5340-12-123-9076
Federkraft- Klipp

5340-12-333-1588

5340-12-373-6335
Angle Bracket

123736335
8812030237: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-380-4302
Section Block Clamp

123804302
105-60501.09: RNCC: 3 | RNVC: 2

29 Oct 2009

5340-12-315-4750
Butt Hinge Leaf

123154750
6561: RNCC: 3 | RNVC: 2
442122: RNCC: 5 | RNVC: 2
6510159: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-12-377-8344
Mounting Bracket

123778344
8451113111: RNCC: 3 | RNVC: 2

13 Feb 2009

5340-12-194-5578
Bow Handle

121945578
KF0155790: RNCC: 3 | RNVC: 2
KF015.5790: RNCC: 5 | RNVC: 2
ZBB12453: RNCC: 5 | RNVC: 2

15 Nov 1982

5340-12-163-6564

5340-12-363-4700
Manual Control Handle

123634700
51-51414: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-362-4087
Mounting Bracket

123624087
54.0054.561.00: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-12-360-1310
Access Cover

123601310
9424620057: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-350-8934
Mounting Plate

123508934
10063-602000.03: RNCC: 3 | RNVC: 2
10063-602000.03: RNCC: 5 | RNVC: 9

31 May 2000

5340-12-365-7108
Angle Bracket

123657108
9438810006: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-365-0649
Mounting Bracket

123650649
4614770341: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-194-1234
Angle Bracket

121941234
A501062: RNCC: 3 | RNVC: 2

5 Oct 1982

5340-12-324-6573
Angle Bracket

123246573
54.0024.765.04: RNCC: 2 | RNVC: 2
54.0024.765.04: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-12-350-3435
Access Cover

123503435
105-610211.05: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-380-8339
Spacing Threaded Standoff

123808339
09740820: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-345-5987
Mounting Bracket

123455987
03767701: RNCC: 3 | RNVC: 2
03767701.662: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-12-323-5134
Mounting Bracket

123235134
42207442: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-12-178-6851
Double Angle Bracket

121786851
3521550127: RNCC: 3 | RNVC: 2
3521550127: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-350-4450
Spacing Threaded Standoff

123504450
12203801: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-310-2819
Mending Plate

123102819
1216 7815: RNCC: 3 | RNVC: 2
12167815: RNCC: 5 | RNVC: 9
6.420.0.680.003.4: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-349-7953
Webbing Strap

123497953
61 21 2 306 106: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-146-6701
Electrical-Mechanical Equipment Post

121466701
VG95148B6XM3X20-ST-B4G: RNCC: 2 | RNVC: 2
VG95148B6XM3X20-ST-B4G: RNCC: 3 | RNVC: 2
REM11-204: RNCC: 3 | RNVC: 2
REM11-204: RNCC: 3 | RNVC: 2
REM11-204: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-8242
Webbing Strap

121978242
2500035-106240.00: RNCC: 2 | RNVC: 2
2500035-106240.00: RNCC: 5 | RNVC: 2
2500035-106240.00: RNCC: 5 | RNVC: 9
000-D6-25X2,5X510-PE-RAL6031: RNCC: 6 | RNVC: 9

25 Nov 1983

5340-12-171-7551
Dust And Moisture Seal Protective Cap

121717551
8950712304: RNCC: 3 | RNVC: 2
1695968: RNCC: 5 | RNVC: 2
8463074: RNCC: 5 | RNVC: 2
0609594: RNCC: 5 | RNVC: 2
81.96410-0295: RNCC: 5 | RNVC: 2
81964100295: RNCC: 5 | RNVC: 2

11 Nov 1977

5340-12-362-4865
Nonmetallic Bumper

123624865
4860923-00: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-389-2297
Mounting Bracket

123892297
601243-202110.00: RNCC: 2 | RNVC: 2
601243-202110.00: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-12-300-0011
Angle Bracket

123000011
C249-A34-C27: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-333-7275
Pipe Hanger

123337275
SP6000.200/30B-W1: RNCC: 3 | RNVC: 2
SP6000-200-30W1: RNCC: 5 | RNVC: 2
SP6000.200/30B: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-12-350-0064
Dust And Moisture Seal Protective Plug

123500064
88960020076: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-166-5572
Retaining Strap

121665572
PAN6483BA: RNCC: 3 | RNVC: 2
PAN6483B: RNCC: 5 | RNVC: 2
PAN6483B: RNCC: 5 | RNVC: 2

24 Sep 1976

5340-12-177-8100
Resilient Mount

121778100
4112410065: RNCC: 3 | RNVC: 2

21 Feb 1979

5340-12-199-2310
Mending Plate

121992310
114C62009: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-12-199-1781
Retaining Strap

121991781
281411063: RNCC: 3 | RNVC: 2

3 Apr 1984

Load More Results