What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 72 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 72 of 178

5340-12-187-9955
Nonmetallic Bumper

121879955
03150900: RNCC: 3 | RNVC: 2
03150900.035: RNCC: 5 | RNVC: 9
32405: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-320-1230
Mending Plate

123201230
CF305779: RNCC: 3 | RNVC: 2
4900059-745850.003.0: RNCC: 5 | RNVC: 2

8 Dec 1989

5340-12-191-6630
Spring Tension Clip

121916630
4604270021: RNCC: 3 | RNVC: 2
721 1 35 027 1: RNCC: 5 | RNVC: 9

23 Feb 1982

5340-12-339-1624
Retaining Band

123391624
50001448-3: RNCC: 3 | RNVC: 2
50001448-3: RNCC: 5 | RNVC: 9

19 Oct 1995

5340-12-300-9199
Mending Plate

123009199
1423-282.04(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-331-4981
Mounting Bracket

123314981
2996.41.66: RNCC: 3 | RNVC: 2
29964166: RNCC: 5 | RNVC: 9

11 May 1993

5340-12-359-7110
Mounting Plate

123597110
9483120057: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-330-1553
Loop Clamp

123301553
1218048253: RNCC: 3 | RNVC: 2
121 8048 253: RNCC: 5 | RNVC: 2
03802400: RNCC: 5 | RNVC: 2
03802400.514: RNCC: 5 | RNVC: 2

10 Nov 1992

5340-12-307-6919
Retaining Band

123076919
81.97460.5206: RNCC: 3 | RNVC: 2

16 Jul 1986

5340-12-328-3953
Nonmetallic Bumper

123283953
4618260196: RNCC: 3 | RNVC: 2

14 May 1992

5340-12-376-1004
Clamping Catch

123761004
1508298: RNCC: 3 | RNVC: 2

12 Aug 2008

5340-12-320-6084
Dust And Moisture Seal Protective Cap

123206084
R19508: RNCC: 3 | RNVC: 2
R19508LE: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-12-388-8301
Mounting Bracket

123888301
5842031940: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-12-367-9249
Dust And Moisture Seal Protective Cap

123679249
210ZL16X20: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-345-7952
Access Cover

123457952
TA3014P002: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-331-2281
Dust And Moisture Seal Protective Cap

123312281
01033201: RNCC: 3 | RNVC: 2

5 Apr 1993

5340-12-339-7320
Mounting Bracket

123397320
2300380-3510.00: RNCC: 2 | RNVC: 2
2300380-3510.00: RNCC: 3 | RNVC: 2
2300380-3510.00: RNCC: 5 | RNVC: 9
9911299: RNCC: 5 | RNVC: 9

5 Jan 1996

5340-12-364-5249
Snap Hook

123645249
6648 268: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-136-6128

5340-12-319-4600
Mending Plate

123194600
504112: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-394-6447
Mounting Plate

123946447
S880M9202222: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-190-2341
Retaining Band

121902341
GE9101E715: RNCC: 3 | RNVC: 2
GE9101E715: RNCC: 5 | RNVC: 9

16 Nov 1981

5340-12-354-3289
Loop Clamp

123543289
EN4114F03WH0: RNCC: 2 | RNVC: 2

3 Jul 2001

5340-12-321-4008
Electrical-Mechanical Equipment Post

123214008
54.2731.062.12: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-326-1380
Angle Bracket

123261380
272.359.958: RNCC: 3 | RNVC: 2
272.359 958: RNCC: 5 | RNVC: 9

12 Aug 1991

5340-12-382-5572
Webbing Strap

123825572
2427-33000: RNCC: 3 | RNVC: 2

7 Jul 2010

5340-12-381-7294
Shimmy Damper

123817294
0100509075: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-12-702-5345
Mounting Bracket

127025345
VG95211-ML-127025345: RNCC: 2 | RNVC: 2
5.51.7204.0260.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-4962
Mending Plate

123154962
5803471-201811.01: RNCC: 2 | RNVC: 2
65.7789.452.01-A001: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-12-350-4341
Section Block Clamp

123504341
JN0413CGJ60: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-330-5724
Hand Crank

123305724
30.1004: RNCC: 3 | RNVC: 2
67-0582: RNCC: 5 | RNVC: 2

12 Jan 1993

5340-12-195-7305
Corner Brace

121957305
2500067-102170.00: RNCC: 2 | RNVC: 2
2500067-102170.00: RNCC: 3 | RNVC: 2
2500067-102170.00: RNCC: 3 | RNVC: 2
2500067-102170-00: RNCC: 5 | RNVC: 2
2500067-102170.00: RNCC: 5 | RNVC: 9

6 Apr 1983

5340-12-171-6658
Mending Plate

121716658
306-096-80-060: RNCC: 3 | RNVC: 2
81671960001: RNCC: 5 | RNVC: 2
81.67196-0001: RNCC: 5 | RNVC: 2
038957: RNCC: 5 | RNVC: 2

3 Nov 1977

5340-12-309-2442
Door Button

123092442
SZ2530000: RNCC: 3 | RNVC: 2
AE1380/WA6662-84-19: RNCC: 5 | RNVC: 2
SZ2530: RNCC: 5 | RNVC: 2

6 Jan 1987

5340-12-344-3539
Mounting Bracket

123443539
A-243707-023: RNCC: 3 | RNVC: 2
A243707-023: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-187-0729
Clip Retainer Plate

121870729
2300109-061320.000.0: RNCC: 2 | RNVC: 2
2300109-061320-000-0: RNCC: 3 | RNVC: 2
2300109-061320.000.0: RNCC: 3 | RNVC: 2
2300109-061320-000-0: RNCC: 3 | RNVC: 2
2300109-061320-000-0: RNCC: 5 | RNVC: 9
2300109-061320.000.0: RNCC: 5 | RNVC: 9

5 Mar 1981

5340-12-143-0745
Handle Grip

121430745
2360-261100.05.0: RNCC: 2 | RNVC: 2
2360-261100.05.0: RNCC: 3 | RNVC: 2
2360-261100-05-0: RNCC: 5 | RNVC: 2
2360-261100-05-0: RNCC: 5 | RNVC: 2
2360-261100.05.0: RNCC: 5 | RNVC: 2
2360-261100.05.0: RNCC: 5 | RNVC: 9
2360-261100-05-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-7594
Access Cover

123517594
5.063-282: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-358-1209
Detent Plunger

123581209
4000A-310660.003.0: RNCC: 2 | RNVC: 2
4000A-310660.003.0: RNCC: 3 | RNVC: 2

17 Sep 2002

5340-12-301-2038
Double Angle Bracket

123012038
A-245476-751: RNCC: 3 | RNVC: 2
A245476-751: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-303-2638
Helical Compression Spring Seat

123032638
P-886660-001: RNCC: 3 | RNVC: 2
P886660-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-197-4395
Electrical-Mechanical Equipment Post

121974395
VG95148C10XM6X82-1.3952: RNCC: 2 | RNVC: 2
1392253-200020.047: RNCC: 2 | RNVC: 2
1392253-200020.047: RNCC: 3 | RNVC: 2
VG95148C10XM6X82-1.3952: RNCC: 3 | RNVC: 2
1392253-200020.005: RNCC: 5 | RNVC: 9
1392253-200020.005: RNCC: 5 | RNVC: 9
1392253-200020.047: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-12-303-8542
Access Cover

123038542
DDAA 002: RNCC: 3 | RNVC: 2
9.31.067: RNCC: 5 | RNVC: 2
9.31.067.00: RNCC: 5 | RNVC: 2
KMP 6.30-10: RNCC: 5 | RNVC: 2

9 May 1985

5340-12-365-3322
Mounting Plate

123653322
2500267-192410.005.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-191-6279
Loop Clamp

121916279
02-0899-180380.01.0: RNCC: 3 | RNVC: 2
02-0899-180380-01-0: RNCC: 5 | RNVC: 2

17 Feb 1982

5340-12-183-9458
Ball Socket Seat

121839458
2500043-193800-01-0: RNCC: 3 | RNVC: 2
2500043-193800-01-0: RNCC: 5 | RNVC: 9
2500043-193800.01.0: RNCC: 5 | RNVC: 9

3 Jun 1980

5340-12-340-3330
Dust And Moisture Seal Boot

123403330
1051232: RNCC: 3 | RNVC: 2
SK372-000-02.2: RNCC: 5 | RNVC: 2

27 Mar 1996

5340-12-701-4783
Retaining Band

127014783
VG95211-ML-127014783: RNCC: 2 | RNVC: 2
5.12.5811.1230.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-6227
Loop Clamp

123636227
DIN3015-ZKP-2-R-16-18-PA: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-321-6485
Casement Fastener

123216485
7068-41000-002-2: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-312-5407
Angle Bracket

123125407
P-086485-401: RNCC: 3 | RNVC: 2
P086485-401: RNCC: 5 | RNVC: 2

15 Jan 1988

5340-12-155-0534
Spring Tension Clip

121550534
250175-1200.07: RNCC: 2 | RNVC: 2
1952345/3: RNCC: 3 | RNVC: 2
1952345-3: RNCC: 5 | RNVC: 2
250175-1200-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-7134
Access Cover

123907134
SK1145-262200.001.0: RNCC: 3 | RNVC: 2
7112997: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-12-331-0870
Dust And Moisture Seal Boot

123310870
706-650000-910-0: RNCC: 2 | RNVC: 2
706-650000-910-0: RNCC: 3 | RNVC: 2

22 Mar 1993

5340-12-300-4893
Metal Runner

123004893
272.1566.1-10: RNCC: 2 | RNVC: 2
272.1566.1-10: RNCC: 3 | RNVC: 2
272.1566.1-10: RNCC: 5 | RNVC: 9

7 Aug 1984

5340-12-306-6356
Retaining Strap

123066356
704-152610-902-0: RNCC: 3 | RNVC: 2

17 Mar 1986

5340-12-195-1617
Bail Handle

121951617
5801995-190320.02.0: RNCC: 3 | RNVC: 2
5801995-190320.02.0: RNCC: 5 | RNVC: 9

19 Jan 1983

5340-12-326-7789
Mending Plate

123267789
E-4997-01-382: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-384-3672
Spring Loaded Cylinder Fastener

123843672
GN612-12-M20X1,5-BK: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-12-346-6112
Loop Clamp

123466112
046-0001-012-020: RNCC: 3 | RNVC: 2
(241)A39630-109968: RNCC: 5 | RNVC: 2
0-109968: RNCC: 8 | RNVC: 2

17 Aug 1998

5340-12-357-6172
Doorknob

123576172
GN117-GB-T2-Z14: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-702-0204
Loop Clamp

127020204
VG95211-ML-127020204: RNCC: 2 | RNVC: 2
200N118-1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-700-6560
Retaining Strap

127006560
VG95211-ML-127006560: RNCC: 2 | RNVC: 2
5.12.5850.4250.00: RNCC: 3 | RNVC: 2
0501401029479: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-178-2130
Bail Handle

121782130
5800119: RNCC: 3 | RNVC: 2
520597: RNCC: 5 | RNVC: 2
580A292: RNCC: 5 | RNVC: 2
2608444: RNCC: 5 | RNVC: 2
04-2-6718-14: RNCC: 5 | RNVC: 9

26 Mar 1979

5340-12-701-5886
Mounting Bracket

127015886
VG95211-ML-127015886: RNCC: 2 | RNVC: 2
5.12.6501.0170.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-9369
Pad Eye

123009369
1423-112.04(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-343-2476
Loop Clamp

123432476
N 020 620 1: RNCC: 3 | RNVC: 2
N020-620-1: RNCC: 5 | RNVC: 2

22 May 1997

5340-12-386-2206
Access Cover

123862206
2500261-063600.001.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-701-2505
Mounting Bracket

127012505
VG95211-ML-127012505: RNCC: 2 | RNVC: 2
5.12.3630.8020.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-8900
Access Cover

123838900
2300211-182220.001.0: RNCC: 2 | RNVC: 2
2300211-182220.001.0: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-327-6562
Loop Clamp

123276562
323G-00-T5: RNCC: 3 | RNVC: 2

14 Feb 1992

5340-12-325-3657
Retaining Strap

123253657
050H4400-01: RNCC: 3 | RNVC: 2
170615150: RNCC: 5 | RNVC: 2

29 May 1991

5340-12-370-0109
Double Angle Bracket

123700109
3037.926: RNCC: 3 | RNVC: 2
F20-122-001-35A-Z2: RNCC: 5 | RNVC: 2

5 Sep 2006

5340-12-348-0962
Webbing Strap

123480962
T13274: RNCC: 3 | RNVC: 2
T13274: RNCC: 5 | RNVC: 2

13 Apr 1999

5340-12-362-1712
Spacing Threaded Standoff

123621712
00M0230000015011: RNCC: 3 | RNVC: 2

20 Jan 2004

5340-12-356-9442
Loop Clamp

123569442
8819950410: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-182-6792
Dust And Moisture Seal Protective Plug

121826792
2314101: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-12-339-3941
Electronic Equipment Hardware Kit

123393941
001.00.00.101: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-12-377-4085
Runner

123774085
8605001.3.550.24: RNCC: 3 | RNVC: 2
8605001355024: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-12-355-4843
Mounting Plate

123554843
5372.029.4: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-388-9675
Angle Bracket

123889675
122W163830.001.0: RNCC: 2 | RNVC: 2
122W163830.001.0: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-165-4418
Dust And Moisture Seal Protective Cap-Plug

121654418
610U12: RNCC: 3 | RNVC: 2
GPN610U12: RNCC: 5 | RNVC: 2
610001200: RNCC: 5 | RNVC: 9
U12: RNCC: 5 | RNVC: 9
U12GPN610: RNCC: 5 | RNVC: 9
GPN610,U12: RNCC: 5 | RNVC: 9

4 May 1976

5340-12-354-4353
Mounting Plate

123544353
4500421205: RNCC: 3 | RNVC: 2
06460P003015: RNCC: 5 | RNVC: 2

11 Jul 2001

5340-12-325-5153
Butt Hinge Leaf

123255153
4608981220: RNCC: 3 | RNVC: 2
7212832201: RNCC: 5 | RNVC: 9

12 Jun 1991

5340-12-356-0794
Helical Compression Spring Seat

123560794
6739190022: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-12-369-5741
Spacing Threaded Standoff

123695741
AM420: RNCC: 3 | RNVC: 2

26 Jul 2006

5340-12-092-2645

5340-12-351-6135
Retaining Strap

123516135
JN0242F32: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-12-382-1827
Access Cover

123821827
279.657 224: RNCC: 3 | RNVC: 2

19 May 2010

5340-12-310-9657
Metal Runner

123109657
272.336 914: RNCC: 2 | RNVC: 2
272.336.914: RNCC: 3 | RNVC: 2
272.336 914: RNCC: 5 | RNVC: 9

14 Jul 1987

5340-12-134-4709

5340-12-357-5288
Mounting Bracket

123575288
0008101025: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-195-9669
Nonmetallic Bumper

121959669
355008: RNCC: 3 | RNVC: 2

9 May 1983

5340-12-701-8468
Loop Clamp

127018468
VG95211-ML-127018468: RNCC: 2 | RNVC: 2
5156A-16: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-8966
Mounting Bracket

123448966
5803644-203110.00: RNCC: 2 | RNVC: 2
55.0209.116.00: RNCC: 3 | RNVC: 2
5803644-203110.00: RNCC: 5 | RNVC: 9

8 Jan 1998

5340-12-366-7045
Clamping Catch

123667045
K2-3005-51: RNCC: 3 | RNVC: 2

30 May 2005

5340-12-357-5029
Mounting Bracket

123575029
J92228170-403: RNCC: 3 | RNVC: 2
007765027: RNCC: 5 | RNVC: 2

27 Jun 2002

5340-12-190-6855
Spring Tension Clip

121906855
NO PRIMARY REF 12-190-6855: RNCC: 3 | RNVC: 2
6060129045: RNCC: 5 | RNVC: 9
6060 129045: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-152-3818
Nonmetallic Bumper

121523818
C20365A9C60: RNCC: 3 | RNVC: 2
845-C20365-A9-C60: RNCC: 3 | RNVC: 2
C20365-A9-C60: RNCC: 5 | RNVC: 2
TTPK9T60: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-8876
Nonmetallic Bumper

123018876
20-5210-070: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-702-1652
Retaining Bail

127021652
VG95211-ML-127021652: RNCC: 2 | RNVC: 2
30.7060.36: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-305-0505
Mending Plate

123050505
5801759-141000.005: RNCC: 2 | RNVC: 2
5801759-141000.005: RNCC: 3 | RNVC: 2
5801759-141000.005: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-194-1050
Escutcheon Plate

121941050
211843711L: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-12-377-3514
Angle Bracket

123773514
41216817: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-331-5586
Webbing Strap

123315586
1475-9714.21: RNCC: 3 | RNVC: 2
1475-9714.21: RNCC: 5 | RNVC: 2

19 May 1993

5340-12-134-4911

5340-12-178-6161
Webbing Strap

121786161
T12780: RNCC: 3 | RNVC: 2
T12982: RNCC: 5 | RNVC: 2
T12780: RNCC: 5 | RNVC: 9

7 May 1979

5340-12-364-1960
Cushioning Pad

123641960
GSERD2010.07.05.03: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-321-6729
Loop Clamp

123216729
3916538970: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-12-337-2002
Key Blank

123372002
959: RNCC: 3 | RNVC: 2
959L: RNCC: 5 | RNVC: 2

1 Feb 1995

5340-12-301-2397
Double Angle Bracket

123012397
4179242: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-347-9883
Manual Control Handle

123479883
191711503ALV8: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-12-135-7019

5340-12-192-2448
Spring Tension Clip

121922448
160-28586: RNCC: 3 | RNVC: 2
160-28586: RNCC: 5 | RNVC: 9

5 Apr 1982

5340-12-302-7908
Bow Handle

123027908
178.E73.80: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-300-8421
Dust And Moisture Seal Protective Cap

123008421
3104660105: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-353-8157
Multiple Eye Pad

123538157
16001493: RNCC: 3 | RNVC: 2

11 May 2001

5340-12-329-8279
Angle Bracket

123298279
2653-990730.01: RNCC: 2 | RNVC: 2
2653-990730.01: RNCC: 3 | RNVC: 2

3 Oct 1992

5340-12-307-7045
Mending Plate

123077045
RP650627: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-302-9757
Sealing Plug Assembly

123029757
0289 4822: RNCC: 3 | RNVC: 2
2894822: RNCC: 5 | RNVC: 2

13 Feb 1985

5340-12-173-8522
Loop Clamp

121738522
PAN4231E2222: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-306-0337
Nonmetallic Bumper

123060337
8036Z1301: RNCC: 3 | RNVC: 2

22 Jan 1986

5340-12-309-0573
Nonmetallic Bumper

123090573
GE9102T372: RNCC: 3 | RNVC: 2
GE9102T372: RNCC: 5 | RNVC: 9

11 Dec 1986

5340-12-359-7998
Mounting Bracket

123597998
81255405074: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-371-5404
Mounting Bracket

123715404
0002044-002: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-123-8660

5340-12-366-5218
Dust And Moisture Seal Protective Cap-Plug

123665218
S433M1091212: RNCC: 3 | RNVC: 2

3 May 2005

5340-12-362-5311
Dust And Moisture Seal Protective Plug

123625311
0019885735: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-353-2101
Spacing Threaded Standoff

123532101
54.0084.618.16: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-367-2043
Eye Hook

123672043
4608980164: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-12-314-9936
Beam Gripping Clamp

123149936
Z5.522.8553.0: RNCC: 3 | RNVC: 2
520860: RNCC: 5 | RNVC: 2
0107 2543: RNCC: 5 | RNVC: 2
9708/2S35: RNCC: 5 | RNVC: 2
Z5.522.8553: RNCC: 5 | RNVC: 2

6 Sep 1988

5340-12-321-6159
Metallic Solid Wheel

123216159
702-132500-906-0: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-360-7686
Mounting Plate

123607686
1873-107000.001.0: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-701-9414
Rod End Clevis

127019414
VG95211-ML-127019414: RNCC: 2 | RNVC: 2
5.12.0220.1702.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-368-6692
Loop Clamp

123686692
DIN3016-1-A1-18X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-A1-18X20-W1-2-CR: RNCC: 5 | RNVC: 9

5 Apr 2006

5340-12-165-6946
Butt Hinge

121656946
3409-32X0-8: RNCC: 3 | RNVC: 2
32X0-8-3409: RNCC: 5 | RNVC: 2
32X0-8-3409: RNCC: 5 | RNVC: 2
GSV3409-32X0-8: RNCC: 5 | RNVC: 2

22 Jun 1976

5340-12-163-9466
Rod End Connector

121639466
T21045-58: RNCC: 3 | RNVC: 2
1918-726009-58: RNCC: 5 | RNVC: 2
1918-726009-58: RNCC: 5 | RNVC: 9
1918-726009.58: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-367-3031
Mounting Bracket

123673031
5.044-196.0: RNCC: 3 | RNVC: 2

1 Aug 2005

5340-12-316-0684
Mending Plate

123160684
2500179-198700.002.0: RNCC: 2 | RNVC: 2
2500179-198700.002.0: RNCC: 3 | RNVC: 2

20 Dec 1988

5340-12-329-6343
Cane Bolt

123296343
590860-4500.000: RNCC: 2 | RNVC: 2
590860-4500.000: RNCC: 3 | RNVC: 2

11 Sep 1992

5340-12-342-1946
Angle Bracket

123421946
347-150-027A: RNCC: 3 | RNVC: 2
347-150-027: RNCC: 5 | RNVC: 9

30 Dec 1996

5340-12-347-6072
Multiple Angle Bracket

123476072
820-2105.5.5A: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-12-328-9764
Permanent Magnet

123289764
5801984-983700.000.0 POS.3: RNCC: 2 | RNVC: 2
R30: RNCC: 3 | RNVC: 2
5801984-983700.000.0POS3: RNCC: 5 | RNVC: 2
R30: RNCC: 5 | RNVC: 9

4 Jul 1992

5340-12-313-1277
Mending Plate

123131277
7.35.7-24.41.09-01: RNCC: 3 | RNVC: 2

5 Mar 1988

5340-12-305-1107
Electrical-Mechanical Equipment Post

123051107
4900059-111130.006.0: RNCC: 3 | RNVC: 2
1228085: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-703-1091
Pawl Fastener

127031091
VG95211-ML-127031091: RNCC: 2 | RNVC: 2
155N1013-4: RNCC: 3 | RNVC: 2
0500802760989: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-701-3419
Rod End Connector

127013419
VG95211-ML-127013419: RNCC: 2 | RNVC: 2
5.12.5111.2220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-324-7056
Electrical-Mechanical Equipment Post

123247056
2902070127: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-378-3646
Mounting Plate

123783646
41226212: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-328-5612
Mending Plate

123285612
52.3108.115.06: RNCC: 2 | RNVC: 2
52.3108.115.06: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-12-314-5454
Mounting Bracket

123145454
6204300510: RNCC: 3 | RNVC: 2
620 430 05 10: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-370-4220
Bow Handle

123704220
464-630580.002: RNCC: 2 | RNVC: 2
464-630580.002: RNCC: 3 | RNVC: 2

6 Nov 2006

5340-12-368-3753
Rim Lock

123683753
6039ZR VERCHROMT: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-12-324-6502
Mounting Plate

123246502
100017015: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-349-7696
Angle Bracket

123497696
81252450139: RNCC: 3 | RNVC: 2
81.25245.0139: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-374-3974
Double Angle Bracket

123743974
105-317391.09: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-341-9680
Mounting Bracket

123419680
CF 359 121 A: RNCC: 2 | RNVC: 2
CF 359 121 A: RNCC: 3 | RNVC: 2
CF 359 121 A: RNCC: 5 | RNVC: 2

22 Nov 1996

5340-12-375-3951
Multiple Angle Bracket

123753951
2 0096-628: RNCC: 3 | RNVC: 2
2 0096-628: RNCC: 5 | RNVC: 2

28 May 2008

5340-12-358-7568
Access Cover

123587568
2500262-393000.005.0: RNCC: 2 | RNVC: 2
2500262-393000.005.0: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-338-8584
T Bracket

123388584
2300232-826230.000.0: RNCC: 2 | RNVC: 2
2300232-826230.000.0: RNCC: 3 | RNVC: 2
1270915: RNCC: 5 | RNVC: 2

31 Aug 1995

5340-12-365-7797
Hand Crank

123657797
JSU23: RNCC: 3 | RNVC: 2
LET00074: RNCC: 5 | RNVC: 2

2 Feb 2005

5340-12-357-8898
Mounting Bracket

123578898
TA3104G001: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-359-1238
Expansion Plug

123591238
000000000618: RNCC: 3 | RNVC: 2
N000000000618: RNCC: 5 | RNVC: 9

18 Dec 2002

5340-12-136-0819
Retaining Clip

121360819
113109439: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-365-1242
Dust And Moisture Seal Protective Plug

123651242
0019973986: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-324-8639
Manual Control Handle

123248639
WW 414 141 AX: RNCC: 2 | RNVC: 2
WW 414 141 AX: RNCC: 3 | RNVC: 2
WW 414 141 AX: RNCC: 5 | RNVC: 9

2 Apr 1991

5340-12-380-3495
Retaining Strap

123803495
6708110049: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-12-301-2721
Helical Compression Spring Seat

123012721
075975-226.16.14.00: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-12-129-8485

5340-12-326-4554
Multiple Angle Bracket

123264554
3964750303: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-389-2057
Spacing Threaded Standoff

123892057
05.30.320: RNCC: 3 | RNVC: 2

5 Jun 2012

5340-12-363-8940
Section Block Clamp

123638940
0422 2962: RNCC: 3 | RNVC: 2

3 Aug 2004

5340-12-318-3356

5340-12-325-0794
Electrical-Mechanical Equipment Post

123250794
35632104: RNCC: 3 | RNVC: 2
66.3518.234.02-A001: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-388-5407
Expansion Shield

123885407
50556: RNCC: 3 | RNVC: 2
SLM16: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-12-316-9825
Dust And Moisture Seal Protective Cap

123169825
20731: RNCC: 3 | RNVC: 2
ST12: RNCC: 5 | RNVC: 2

1 Mar 1989

5340-12-330-4710
Dust And Moisture Seal Protective Cap

123304710
307.150-10216.05: RNCC: 3 | RNVC: 2

18 Dec 1992

5340-12-376-8056
Bridge Clamp

123768056
4700-001: RNCC: 3 | RNVC: 2

10 Nov 2008

5340-12-328-9769
Spring Tension Clip

123289769
DEFO-ES-BOLZEN 6X24: RNCC: 3 | RNVC: 2
1011006802: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-142-2990
Retaining Strap

121422990
DIN72573-2X7-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-2X7-ST-ZN: RNCC: 3 | RNVC: 2
DIN72573-2X7-ST: RNCC: 5 | RNVC: 9
2X7DIN72573ST: RNCC: 5 | RNVC: 9
2X7DIN72573STR0H: RNCC: 5 | RNVC: 9
DIN72573-2X7-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-134-8658
Retaining Strap

121348658
DIN72571-2X12-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72571-2X12-ST-VERZINKT: RNCC: 3 | RNVC: 2
5108980212: RNCC: 5 | RNVC: 2
BSL2X12/72571VPE: RNCC: 5 | RNVC: 2
DIN72571-2X12-ST-VERZINKT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-6331
Mounting Bracket

123566331
J92224346-005: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-354-1182
Access Cover

123541182
00993201: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-381-3892
Webbing Strap

123813892
623G3=30: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-12-320-1918
Flush Lock

123201918
176342: RNCC: 3 | RNVC: 9

15 Dec 1989

5340-12-380-2819
Mounting Bracket

123802819
65000279: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-139-6828
Dust And Moisture Seal Protective Cap

121396828
AWENTW2663A57: RNCC: 3 | RNVC: 2
AWENTW2663A57: RNCC: 5 | RNVC: 2
AWENTW2663A57: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-5983
Mounting Bracket

123505983
1308895011: RNCC: 3 | RNVC: 9

18 Apr 2000

5340-12-010-4296

5340-12-300-5289
Angle Bracket

123005289
04668: RNCC: 3 | RNVC: 2
04668: RNCC: 5 | RNVC: 9

10 Aug 1984

5340-12-363-2916
Mounting Plate

123632916
599.076.006.014: RNCC: 3 | RNVC: 2
81657520013: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-329-3107
Helical Compression Spring Seat

123293107
418785: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-12-381-6804
Dust And Moisture Seal Protective Plug

123816804
504015886: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-379-6281
Loop Clamp

123796281
1556626: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-359-0564
Mounting Bracket

123590564
9117724000: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-368-8691
Halter

123688691
2045-252340B00C: RNCC: 3 | RNVC: 2

3 May 2006

5340-12-315-2430
Loop Clamp

123152430
P-735106-009: RNCC: 3 | RNVC: 2
P735106-009: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-197-1234
Catch Strike

121971234
95H07-1-1BC: RNCC: 3 | RNVC: 2

21 Sep 1983

5340-12-158-6210
Compression Cup

121586210
H90-1-88NBR/101: RNCC: 3 | RNVC: 2
H90-1-14PA101: RNCC: 5 | RNVC: 2
H90-1-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-310-6187
Dust And Moisture Seal Protective Cap

123106187
8408256: RNCC: 3 | RNVC: 2
570346477: RNCC: 3 | RNVC: 2
E 129-0063: RNCC: 5 | RNVC: 2
4-1190-593: RNCC: 5 | RNVC: 2

10 Jun 1987

5340-12-337-7807
Angle Bracket

123377807
1602-101130.000.0: RNCC: 2 | RNVC: 2
1602-101130.000.0: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-166-0451
Bail Handle

121660451
100429-32162-01-0: RNCC: 2 | RNVC: 2
100429-32162-01-0: RNCC: 5 | RNVC: 2

29 Jul 1976

5340-12-701-7597
Angle Bracket

127017597
VG95211-ML-127017597: RNCC: 2 | RNVC: 2
5.12.7701.1080.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-1449
Angle Bracket

123101449
2500179-194000.001.0: RNCC: 2 | RNVC: 2
2500179-194000.001.0: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-12-127-1251
Resilient Mount

121271251
2-03-009522-01: RNCC: 3 | RNVC: 9
0009881210: RNCC: 5 | RNVC: 2
N09522-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-6382
Helical Compression Spring Seat

121666382
1-60-7-22-10-03-06: RNCC: 3 | RNVC: 2
1-2210-3: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-361-3690
Loop Clamp

123613690
DIN3016-1-D1-65X25-W1-2-EPDM: RNCC: 2 | RNVC: 2
06.67300-6546: RNCC: 5 | RNVC: 2
06673006546: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-12-359-4357
Loop Clamp

123594357
DIN3016-1-D1-30X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-306-3632
Spring Tension Clip

123063632
1300256-100.05: RNCC: 2 | RNVC: 2
774-021-35: RNCC: 3 | RNVC: 2

24 Feb 1986

5340-12-195-4178
Retaining Strap

121954178
5801082-1133.003: RNCC: 3 | RNVC: 2

23 Feb 1983

5340-12-154-7023
Spring Tension Clip

121547023
54-0035-120-18: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-4283
Access Door

123284283
25799-100: RNCC: 2 | RNVC: 2
44890: RNCC: 3 | RNVC: 2
44890: RNCC: 5 | RNVC: 9

16 May 1992

5340-12-328-2826
Expansion Shield

123282826
P6R-6962: RNCC: 3 | RNVC: 2
PR6-6962: RNCC: 5 | RNVC: 9
160 00 84 0020: RNCC: 5 | RNVC: 9

1 May 1992

5340-12-300-9946
Rod End Clevis

123009946
07620-10: RNCC: 3 | RNVC: 2
NLM762-10: RNCC: 5 | RNVC: 2
NLM762-10: RNCC: 5 | RNVC: 9
NLM7620-10: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-355-0340
Mounting Bracket

123550340
204-001-611-5001: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-311-0794
Mending Plate

123110794
2500082-196000.01.0: RNCC: 2 | RNVC: 2
2500082-196000-01-0: RNCC: 3 | RNVC: 2

23 Jul 1987

5340-12-349-9430
Mounting Bracket

123499430
2500238-160210.000.0: RNCC: 2 | RNVC: 2
2500238-160210.000.0: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-12-323-1906
Nonmetallic Bumper

123231906
42-20-151.4: RNCC: 3 | RNVC: 2
D3893-2,70: RNCC: 5 | RNVC: 2
D3893-2,7: RNCC: 5 | RNVC: 9

30 Oct 1990

5340-12-161-6702
Helical Compression Spring Seat

121616702
1202 8179: RNCC: 3 | RNVC: 2
12028179: RNCC: 5 | RNVC: 2
3.601.0.342.001.4: RNCC: 5 | RNVC: 2
3-601-0-342-001-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-9064
Mounting Bracket

123499064
54.1038.130.10: RNCC: 2 | RNVC: 2
54.1038.130.10: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-12-391-4596
Mounting Plate

123914596
I007001TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-322-3615
Door Button

123223615
40 0176 442: RNCC: 2 | RNVC: 2
40 0176 442: RNCC: 3 | RNVC: 2
40 0176 442: RNCC: 5 | RNVC: 9

15 Aug 1990

5340-12-185-2504
Catch Strike

121852504
3553929: RNCC: 3 | RNVC: 2

25 Sep 1980

5340-12-318-1206
Retaining Strap

123181206
DMAF002: RNCC: 3 | RNVC: 2
DM AF 002: RNCC: 5 | RNVC: 2

13 Jun 1989

5340-12-185-0281
Angle Bracket

121850281
CF455887: RNCC: 3 | RNVC: 2
CF455887: RNCC: 5 | RNVC: 2
CF 455 887: RNCC: 5 | RNVC: 2
CF 455 887: RNCC: 5 | RNVC: 2

4 Sep 1980

5340-12-181-4656
Dust And Moisture Seal Protective Plug

121814656
H3: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-12-323-8833
Loop Clamp

123238833
51.0447.143.00: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-12-321-9964
Mending Plate

123219964
0216 3879: RNCC: 3 | RNVC: 2
89233118: RNCC: 5 | RNVC: 2
2163879ED0150-56: RNCC: 5 | RNVC: 9

16 Jul 1990

5340-12-040-6192

5340-12-027-8400

5340-12-393-4317
Butt Hinge

123934317
4100098-723320.004.0: RNCC: 2 | RNVC: 2
4100098-723320.004.0: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-12-394-3844
Mounting Plate

123943844
272.494.744.GZ-4: RNCC: 3 | RNVC: 2

27 Nov 2013

5340-12-393-0261
Mounting Bracket

123930261
1030105-259000.015.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-376-3226
Access Cover

123763226
BK208033-D: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-12-367-4406
Loop Clamp

123674406
883 5: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-324-9675
Tee Hinge

123249675
539869: RNCC: 3 | RNVC: 2
0539869: RNCC: 5 | RNVC: 2
A13.0238.00: RNCC: 5 | RNVC: 2
0431.059.4: RNCC: 5 | RNVC: 2

16 Apr 1991

5340-12-308-0343
Retaining Strap

123080343
4022.3910.3: RNCC: 3 | RNVC: 2

22 Aug 1986

5340-12-345-3023
Mounting Bracket

123453023
1602-208500.000.0: RNCC: 2 | RNVC: 2
1602-208500.000.0: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-12-365-3727
Double Angle Bracket

123653727
2300109-970498.001.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-327-2722
Mounting Bracket

123272722
1350.6,5.162.533: RNCC: 3 | RNVC: 2
1350.6.5.162.533: RNCC: 5 | RNVC: 2

3 Jan 1992

5340-12-321-7662
Dust And Moisture Seal Protective Plug

123217662
700M52X2: RNCC: 3 | RNVC: 2
779008677: RNCC: 5 | RNVC: 2
GPN700,M52X2 FORM A: RNCC: 5 | RNVC: 9

25 Jun 1990

5340-12-303-4276
Angle Bracket

123034276
42403801: RNCC: 3 | RNVC: 2

21 Mar 1985

5340-12-372-4120
Dust And Moisture Seal Protective Cap

123724120
11210847100: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-372-2079
Manual Control Lever

123722079
60380107102: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-320-7333
Mending Plate

123207333
54.0062.980.05: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-344-2201
Spacing Threaded Standoff

123442201
1227 9816: RNCC: 3 | RNVC: 2
12279816: RNCC: 5 | RNVC: 2
12279816EE0120-57: RNCC: 5 | RNVC: 2

1 Oct 1997

5340-12-371-8082
Mounting Plate

123718082
C42393A77C59: RNCC: 3 | RNVC: 2

18 May 2007

5340-12-391-3259
Runner

123913259
101889: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-302-7619
Pad Eye

123027619
2399101: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-379-6676
Spring Loaded Cylinder Fastener

123796676
03089-3105: RNCC: 3 | RNVC: 2

20 Aug 2009

5340-12-199-0796
Nonmetallic Bumper

121990796
SKK3820: RNCC: 3 | RNVC: 2
3853170012: RNCC: 5 | RNVC: 2

23 Mar 1984

5340-12-351-6124
Retaining Strap

123516124
JN0242F10: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-12-183-8120
Dust And Moisture Seal Protective Plug

121838120
181827525: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-389-8554
Flush Lock

123898554
0326747: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-12-338-4090
Double Angle Bracket

123384090
201415000009: RNCC: 3 | RNVC: 2
201415000009: RNCC: 5 | RNVC: 2
20 1415 00 00 09: RNCC: 5 | RNVC: 2

4 Jul 1995

5340-12-322-8279
Lock-Release Lever

123228279
6735129: RNCC: 2 | RNVC: 2
6735129: RNCC: 3 | RNVC: 2
6735129: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-347-0223
Turnbuckle

123470223
4359308052: RNCC: 3 | RNVC: 2
A4359308052: RNCC: 5 | RNVC: 9

12 Oct 1998

5340-12-372-2629
Nonmetallic Bumper

123722629
4633230585: RNCC: 3 | RNVC: 2
463 323 05 85: RNCC: 5 | RNVC: 2

3 Jul 2007

5340-12-382-1741
Mounting Bracket

123821741
136M55056E1: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-382-2279
Mounting Bracket

123822279
5230980139: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-344-4891
Angle Bracket

123444891
2500255-190000.038.0: RNCC: 2 | RNVC: 2
2500255-190000.038.0: RNCC: 3 | RNVC: 2

3 Nov 1997

5340-12-701-9921
Loop Clamp

127019921
VG95211-ML-127019921: RNCC: 2 | RNVC: 2
155N464-376: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-700-8682
Loop Clamp

127008682
VG95211-ML-127008682: RNCC: 2 | RNVC: 2
155N464-272: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-302-0140
Lock-Release Lever

123020140
51.6818.358.00: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-12-304-0851
Loop Clamp

123040851
250C: RNCC: 3 | RNVC: 2
ZET250C: RNCC: 5 | RNVC: 2

10 Jun 1985

5340-12-020-7827

5340-12-302-2572
Mending Plate

123022572
6204901340: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-159-6180
Spring Tension Clip

121596180
011980: RNCC: 3 | RNVC: 2
277-41850: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-352-6772
Barrel Bolt

123526772
5400051-972013.00: RNCC: 2 | RNVC: 2
5400051-972013.00: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-362-8745
Loop Clamp

123628745
111122: RNCC: 3 | RNVC: 2

8 Apr 2004

5340-12-304-1087
Metal Runner

123041087
17462.0M10: RNCC: 3 | RNVC: 2

12 Jun 1985

5340-12-367-6705
Manual Control Handle

123676705
4639200295: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-12-197-2076
Helical Compression Spring Seat

121972076
4353250126: RNCC: 3 | RNVC: 2

29 Sep 1983

5340-12-333-2242
Double Angle Bracket

123332242
81429025184: RNCC: 2 | RNVC: 2
81429025184: RNCC: 3 | RNVC: 2
81.42902.5184: RNCC: 5 | RNVC: 2

11 Nov 1993

5340-12-344-0404
Lock-Release Lever

123440404
2996.72.58: RNCC: 3 | RNVC: 2
2996.7258: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-344-6899
Mounting Bracket

123446899
5590900841: RNCC: 3 | RNVC: 2

28 Nov 1997

5340-12-317-2985
Bow Handle

123172985
3228150536: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-312-0862
Spring Tension Clip

123120862
AZ8114T422: RNCC: 2 | RNVC: 2
AZ8114T422: RNCC: 3 | RNVC: 2
AZ8114T422: RNCC: 5 | RNVC: 9

19 Nov 1987

5340-12-364-4314
Mounting Bracket

123644314
54.1107.515.00: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-383-3594
Dust And Moisture Seal Protective Cap-Plug

123833594
1407597: RNCC: 3 | RNVC: 2
35.445.016: RNCC: 5 | RNVC: 2

11 Oct 2010

5340-12-385-5123
Access Cover

123855123
5590130133: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-360-0346
Track Stop

123600346
8012.13.00: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-348-0201
Helical Compression Spring Seat

123480201
0289 8171: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-330-2947
Mounting Bracket

123302947
160-75380: RNCC: 3 | RNVC: 2
160-75380: RNCC: 5 | RNVC: 9

27 Nov 1992

5340-12-350-0873
Angle Bracket

123500873
83155010004: RNCC: 3 | RNVC: 2
83.15501.0004: RNCC: 5 | RNVC: 2

14 Feb 2000

5340-12-362-8521
Access Cover

123628521
51-76808: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-355-4872
Mounting Bracket

123554872
4615000931: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-194-0866
Retaining Strap

121940866
LN29836A32: RNCC: 2 | RNVC: 2

30 Sep 1982

5340-12-043-2649

5340-12-309-2869
Angle Bracket

123092869
81.41720.5143: RNCC: 3 | RNVC: 2

9 Jan 1987

5340-12-305-2563
Angle Bracket

123052563
4900059-111220.000.0/14: RNCC: 3 | RNVC: 2
4900059-111220.014.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-166-0449
Spring Tension Clip

121660449
100429-32050.09.0: RNCC: 2 | RNVC: 2
100429-32050.09.0: RNCC: 3 | RNVC: 2
100429-32050-09-0: RNCC: 5 | RNVC: 2
100429-32050-09-0: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-319-3282
Spring Loaded Cylinder Fastener

123193282
1000192-03 2 03200: RNCC: 2 | RNVC: 2
1000192-03 2 03200: RNCC: 3 | RNVC: 2
1000192-03 2 03200: RNCC: 5 | RNVC: 9
10003-03 2 83200: RNCC: 5 | RNVC: 9
10003-03 2 83200: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-384-5249
Dust And Moisture Seal Boot

123845249
000827: RNCC: 3 | RNVC: 2
01-002-001-0405-00-0: RNCC: 5 | RNVC: 2

2 Mar 2011

5340-12-390-4554
Corrosion Preventive Anode

123904554
1-4031-237-00: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-12-194-9377
Mending Plate

121949377
66.3851.222.00-A002: RNCC: 3 | RNVC: 2
161576: RNCC: 5 | RNVC: 2
66-3851-222-00A002: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-194-8872
Butt Hinge

121948872
DIN7955-XC60-ST-BK: RNCC: 2 | RNVC: 2
NR.1-60MM: RNCC: 3 | RNVC: 2
XC60DIN7955: RNCC: 5 | RNVC: 2

15 Dec 1982

5340-12-392-5631
Clamping Catch

123925631
6000062-331580.000.0: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-12-333-6202
Resilient Mount

123336202
NEW 2C-75 SHORE A: RNCC: 3 | RNVC: 2
NEW 2C, 75 SHORE A: RNCC: 5 | RNVC: 2
NEW2C, 75 SHORE: RNCC: 5 | RNVC: 2

13 Jan 1994

5340-12-184-9626
Platte

121849626
F01-240141-02-0: RNCC: 3 | RNVC: 2

28 Aug 1980

5340-12-176-4852
Door Button

121764852
81971206009: RNCC: 3 | RNVC: 2
81.97120-6009: RNCC: 5 | RNVC: 2
00009064001: RNCC: 5 | RNVC: 2

30 Nov 1978

5340-12-356-8460
Angle Bracket

123568460
ED88-0100-01001-153: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-347-6088
Mounting Bracket

123476088
9900567: RNCC: 3 | RNVC: 2
463-011000.015: RNCC: 5 | RNVC: 2
463-011000.015: RNCC: 5 | RNVC: 9
9900567: RNCC: 5 | RNVC: 9

14 Jan 1999

5340-12-338-6670
Webbing Strap

123386670
424-G406-0003: RNCC: 3 | RNVC: 2

14 Aug 1995

5340-12-301-1412
Flush Bolt

123011412
251843670: RNCC: 3 | RNVC: 9

22 Sep 1984

5340-12-304-6328
Angle Bracket

123046328
4-322.1: RNCC: 3 | RNVC: 2

7 Aug 1985

5340-12-192-8626
Catch Strike

121928626
4606890025: RNCC: 3 | RNVC: 2
721 1 87 063 1: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-390-2882
Loop Clamp

123902882
120D256000.112.0: RNCC: 2 | RNVC: 2
120D256000.112.0: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-366-4262
Mounting Bracket

123664262
2 0071-733: RNCC: 3 | RNVC: 2
2 0071-733: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-12-374-1265
Retaining Clip

123741265
9019880778: RNCC: 3 | RNVC: 2
A 901 988 07 78: RNCC: 5 | RNVC: 2

22 Jan 2008

5340-12-328-3986
Flush Catch Claw

123283986
7300.7220.05.1: RNCC: 3 | RNVC: 2

14 May 1992

5340-12-392-3344
Mounting Bracket

123923344
4100095-986495.000.0: RNCC: 2 | RNVC: 2
4100095-986495.000.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-376-3513
Friction Catch Stud Receptacle

123763513
1600-186600.024.0: RNCC: 2 | RNVC: 2
1600-186600.024.0: RNCC: 3 | RNVC: 2

17 Sep 2008

5340-12-349-8229
Dust And Moisture Seal Protective Plug

123498229
31 42 2 314 133: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-347-7783
Webbing Strap

123477783
2500255-970312.000.0: RNCC: 2 | RNVC: 2
2500255-970312.000.0: RNCC: 3 | RNVC: 2

9 Feb 1999

5340-12-386-2131
Mounting Plate

123862131
2481-391113.000.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-190-9475
Retaining Strap

121909475
4-107621: RNCC: 3 | RNVC: 2

28 Dec 1981

5340-12-386-0188
Access Cover

123860188
2500262-735114.001.0: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-12-344-0171
Mounting Bracket

123440171
2996.10.57: RNCC: 3 | RNVC: 2
2996.1057: RNCC: 5 | RNVC: 2

29 Aug 1997

5340-12-380-5395
Mounting Plate

123805395
8832030940: RNCC: 3 | RNVC: 2

6 Nov 2009

5340-12-164-5066
Angle Bracket

121645066
101025403: RNCC: 3 | RNVC: 2
E101025403: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-145-5439

5340-12-362-4867
Multiple Angle Bracket

123624867
SZ2433.000: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-384-6117
Bumper

123846117
2667: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-368-9285
Mounting Bracket

123689285
0090888: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-345-4388
Mounting Bracket

123454388
54.0053.198.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-331-9127
Dust And Moisture Seal Protective Cap

123319127
339 005: RNCC: 3 | RNVC: 2
339005: RNCC: 5 | RNVC: 2

6 Jul 1993

5340-12-327-2049
Resilient Mount

123272049
51161459064: RNCC: 3 | RNVC: 9

16 Dec 1991

5340-12-362-5272
Mounting Bracket

123625272
668589013400: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-022-7948

5340-12-183-7755
Butt Hinge Leaf

121837755
181831407A: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-347-6037
Mounting Bracket

123476037
8854 131-171: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-338-8712
Mounting Plate

123388712
6700017-640130.01: RNCC: 2 | RNVC: 2
6700017-640130.01: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-12-313-4619
Mending Plate

123134619
5801321-3024.01: RNCC: 2 | RNVC: 2
5801321-3024.01: RNCC: 3 | RNVC: 2
5801321-3024.01: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-320-9953
Dust And Moisture Seal Protective Plug

123209953
NO PRIMARY REF 12-320-9953: RNCC: 3 | RNVC: 2
0009884735: RNCC: 5 | RNVC: 2
200740: RNCC: 5 | RNVC: 9

14 Mar 1990

5340-12-157-7849
Nonmetallic Bumper

121577849
020MITTEL: RNCC: 3 | RNVC: 2
82300-741020.NR55.ST: RNCC: 3 | RNVC: 2
741020MITTEL: RNCC: 3 | RNVC: 2
726611577: RNCC: 5 | RNVC: 2
57410200042: RNCC: 5 | RNVC: 2
741020MITTEL: RNCC: 5 | RNVC: 2
8446757: RNCC: 5 | RNVC: 2
020MITTEL: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-378-5520
Elastic Strap

123785520
D0124718-001: RNCC: 3 | RNVC: 2

21 Apr 2009

5340-12-339-5797
Key Holder

123395797
52018110: RNCC: 3 | RNVC: 9

7 Dec 1995

5340-12-358-7986
Double Angle Bracket

123587986
3892683340: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-380-0162
Butt Hinge

123800162
1054-U17: RNCC: 3 | RNVC: 2
1054-U17: RNCC: 5 | RNVC: 2

18 Sep 2009

5340-12-380-5348
Mounting Plate

123805348
70.407.09.372: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-346-5434
Handrail Bracket

123465434
6060020: RNCC: 3 | RNVC: 2
909593602: RNCC: 5 | RNVC: 9

6 Aug 1998

5340-12-316-2989
Handle Grip

123162989
6190935: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-364-4890
Retaining Band

123644890
VB1276: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-133-4039

5340-12-168-2802
Loop Clamp

121682802
LN9491BM20: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-311-5782
Door Handle

123115782
10 0013 238: RNCC: 3 | RNVC: 2
100013238: RNCC: 3 | RNVC: 2

21 Sep 1987

5340-12-043-2662

5340-12-365-0535
Mechanical Stop

123650535
KE000604: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-323-9262
Flush Catch Claw

123239262
028324: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-12-364-4327
Mounting Bracket

123644327
4257501114: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-142-3941

5340-12-316-7258
Mending Plate

123167258
41891648: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-333-4440
Lock-Release Lever

123334440
6724158: RNCC: 3 | RNVC: 2
6724158: RNCC: 5 | RNVC: 9

15 Dec 1993

5340-12-348-5899
Mounting Bracket

123485899
841 231 44: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-12-164-4560
Loop Clamp

121644560
4039950601: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-394-1503
Dust And Moisture Seal Protective Cap

123941503
CTP40590P006: RNCC: 3 | RNVC: 2

7 Nov 2013

5340-12-364-3907
Friction Catch Stud

123643907
5981-181750.002.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-338-1286
Dust And Moisture Seal Protective Cap

123381286
200Z20X14: RNCC: 3 | RNVC: 2
GPN200/Z20X14: RNCC: 5 | RNVC: 2
Z20X14: RNCC: 5 | RNVC: 2
GPN200Z20X14: RNCC: 5 | RNVC: 2
200Z20X14: RNCC: 5 | RNVC: 2
Z20X14: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-321-2617
Dust And Moisture Seal Protective Cap

123212617
128092: RNCC: 3 | RNVC: 2
D123003-0-7: RNCC: 5 | RNVC: 2
D123003-0.7: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-12-701-4973
Mounting Bracket

127014973
VG95211-ML-127014973: RNCC: 2 | RNVC: 2
5.12.5850.2301.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-374-8919
Multiple Angle Bracket

123748919
SK976-192462.001.0: RNCC: 3 | RNVC: 2
1729566: RNCC: 5 | RNVC: 9

3 Apr 2008

5340-12-311-5965
Mending Plate

123115965
P-245135-751: RNCC: 3 | RNVC: 2
P245135-751: RNCC: 5 | RNVC: 2

23 Sep 1987

5340-12-362-7738
Mending Plate

123627738
2500255-199900.022.0: RNCC: 2 | RNVC: 2
2500255-199900.022.0: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-302-2033
Electrical-Mechanical Equipment Post

123022033
43705745-602: RNCC: 3 | RNVC: 2
VG95148C4XM2X4,8-2.0402.30GALNI5: RNCC: 3 | RNVC: 2

8 Dec 1984

5340-12-701-7164
Angle Bracket

127017164
VG95211-ML-127017164: RNCC: 2 | RNVC: 2
5.12.7601.8090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7681
Mounting Plate

127017681
VG95211-ML-127017681: RNCC: 2 | RNVC: 2
5.12.7702.0590.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8083
Mounting Bracket

127018083
VG95211-ML-127018083: RNCC: 2 | RNVC: 2
5.12.8800.0102.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-176-1297
Angle Bracket

121761297
CF 417 725 B: RNCC: 3 | RNVC: 2
536056-0321.000: RNCC: 3 | RNVC: 2
CF 417 725 B: RNCC: 5 | RNVC: 2
CF 417 725 B: RNCC: 5 | RNVC: 2
CF417725B: RNCC: 5 | RNVC: 9
CF417725B: RNCC: 5 | RNVC: 9
CF417725B: RNCC: 5 | RNVC: 9
536056-0321.000: RNCC: 5 | RNVC: 9

9 Nov 1978

5340-12-174-5141
Helical Compression Spring Seat

121745141
1112910491: RNCC: 3 | RNVC: 2
7-355-0820: RNCC: 5 | RNVC: 2

5 Jul 1978

5340-12-702-4659
Lock-Release Lever

127024659
VG95211-ML-127024659: RNCC: 2 | RNVC: 2
5.51.0603.1381.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-4769
Loop Clamp

127014769
VG95211-ML-127014769: RNCC: 2 | RNVC: 2
5.12.5811.1000.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-179-7391
Access Door

121797391
5801113-52: RNCC: 3 | RNVC: 2

25 Jul 1979

5340-12-174-3136
Nonmetallic Bumper

121743136
MVE01-03: RNCC: 3 | RNVC: 2
1694-274: RNCC: 5 | RNVC: 2
8475001: RNCC: 5 | RNVC: 2

21 Jun 1978

5340-12-388-0941
Rim Latch

123880941
3150-0010: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-306-5153
Dust And Moisture Seal Protective Plug

123065153
1865-060010.00.0: RNCC: 3 | RNVC: 9

6 Mar 1986

5340-12-179-7622
Dust And Moisture Seal Protective Plug

121797622
7215096: RNCC: 3 | RNVC: 2
514GFK/09: RNCC: 3 | RNVC: 2
1009PA: RNCC: 3 | RNVC: 2
2033097: RNCC: 3 | RNVC: 2
434.1778: RNCC: 5 | RNVC: 2
4341778: RNCC: 5 | RNVC: 2
1009PG: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-325-3285
Webbing Strap

123253285
60065-001: RNCC: 3 | RNVC: 2
60 065-001: RNCC: 5 | RNVC: 9

27 May 1991

5340-12-703-3265
Mending Plate

127033265
VG95211-ML-127033265: RNCC: 2 | RNVC: 2
5.12.8402.0102.98: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-324-3716
Mounting Bracket

123243716
2239-000450.000.0: RNCC: 2 | RNVC: 2
2239-000450.000.0: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-12-196-6006
Double Angle Bracket

121966006
5801435-050000.01: RNCC: 2 | RNVC: 2
5801435-050000-01: RNCC: 5 | RNVC: 2

21 Jul 1983

5340-12-319-0795
Mounting Bracket

123190795
5802086-21800: RNCC: 2 | RNVC: 2
5802086-21800: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-12-376-7114
Retaining Strap

123767114
197-1587: RNCC: 3 | RNVC: 2
PCH-6064: RNCC: 5 | RNVC: 2

30 Oct 2008

5340-12-366-2939
Electronic Equipment Hardware Kit

123662939
09823: RNCC: 3 | RNVC: 2
GA2: RNCC: 5 | RNVC: 2

6 Apr 2005

5340-12-179-1428
Nonmetallic Bumper

121791428
0005460637: RNCC: 3 | RNVC: 2
0005460637: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-390-0268
Loop Clamp

123900268
310725: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-339-0508
Strap Fastener Loop

123390508
4618650378: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-370-6261
Dust And Moisture Seal Protective Cap

123706261
5077 229 032: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-12-355-6273
Retaining Strap

123556273
54.1094.282.00: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-12-372-4347
Manual Control Lever

123724347
42237002900: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-12-354-1897
Spring Loaded Cylinder Fastener

123541897
16001787: RNCC: 3 | RNVC: 2

18 Jun 2001

5340-12-041-2325

5340-12-300-9174
Mending Plate

123009174
1423-850.10(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-365-7841
Access Cover

123657841
2300399-992010.000.0: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-12-302-6157
Resilient Mount

123026157
YK03200476: RNCC: 3 | RNVC: 2
03200476: RNCC: 5 | RNVC: 9
H.B.913SV 1056 1975 03 20 0476: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-195-3771
Dust And Moisture Seal Protective Plug

121953771
2-203: RNCC: 3 | RNVC: 2
S203: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-12-320-7469
Mounting Bracket

123207469
6540.983.9: RNCC: 3 | RNVC: 2

13 Feb 1990

5340-12-393-6099
Protection Bellows

123936099
99 D 0200: RNCC: 3 | RNVC: 2
99D0200: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-12-348-8606
Double Angle Bracket

123488606
4404760136: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-166-9329
Rim Lock

121669329
3271DINRECHTS35MM: RNCC: 3 | RNVC: 2
3271DINRECHTS35MM: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-12-382-2388
Mounting Bracket

123822388
S259M1062101: RNCC: 3 | RNVC: 2

26 May 2010

5340-12-382-3388
Mounting Plate

123823388
0738248: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-382-2276
Loop Clamp

123822276
ZTO97: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-352-6349
Mounting Bracket

123526349
1240 0779: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-090-5353

5340-12-146-3916
Helical Compression Spring Seat

121463916
G0030: RNCC: 3 | RNVC: 2
491905379: RNCC: 5 | RNVC: 2
491905379: RNCC: 5 | RNVC: 9
491905379: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-136-2992
Retaining Strap

121362992
114M80013E1: RNCC: 3 | RNVC: 2
28399950720E0: RNCC: 5 | RNVC: 2
8399950720: RNCC: 5 | RNVC: 2
114M80013: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-2213
Metal Runner

123072213
2397401: RNCC: 3 | RNVC: 2

22 May 1986

5340-12-307-1578
Nonmetallic Bumper

123071578
4217230047: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-318-0178
Angle Bracket

123180178
51974800449: RNCC: 3 | RNVC: 2
51.97480.0449: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-394-3349
Bow Handle

123943349
ST-08.102.22: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-12-369-7251
Nonmetallic Bumper

123697251
233593: RNCC: 3 | RNVC: 2
94450-412.06: RNCC: 5 | RNVC: 2

14 Aug 2006

5340-12-300-7984
Webbing Strap

123007984
23114-4179.00: RNCC: 2 | RNVC: 2
23114-4179.00: RNCC: 3 | RNVC: 2
23114-4179-00: RNCC: 5 | RNVC: 9
23114-4179.00: RNCC: 5 | RNVC: 9
23114-4179-00: RNCC: 5 | RNVC: 9
23114-4179.00: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-385-1376
Nonmetallic Solid Wheel

123851376
F1.4211-50-30-00.00-66: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-373-7677
Access Cover

123737677
J040G8015H518-000A0-005: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-12-124-4563
Rod End Clevis

121244563
DIN71752-G8X16-35S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G8X16-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G8X16-35S20K-A3P: RNCC: 3 | RNVC: 2
G8X16DIN71752-35S20K: RNCC: 5 | RNVC: 2
100200080016/024-35S20K: RNCC: 5 | RNVC: 2
G8X16DIN71752-35S20K: RNCC: 5 | RNVC: 9
DIN71752-G8X16-35S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-5881
Double Angle Bracket

123655881
J32320054-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-319-4120
Ball Socket Seat

123194120
1003000008: RNCC: 3 | RNVC: 2
8SXN03R: RNCC: 5 | RNVC: 2

29 Sep 1989

5340-12-365-7762
Rod End Connector

123657762
AUSLOESEKOPF K21267: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-12-346-7526
Clamping Catch

123467526
8474.1001: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-042-2686

5340-12-387-1495
Mounting Bracket

123871495
2300588-250430.000: RNCC: 2 | RNVC: 2
2300588-250430.000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-12-361-4172
Mounting Bracket

123614172
1504303: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-326-4551
Mounting Bracket

123264551
3963120465: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-326-3905
Angle Bracket

123263905
3963001040: RNCC: 3 | RNVC: 2
396 300 10 40: RNCC: 5 | RNVC: 2

10 Sep 1991

5340-12-368-9413
Mounting Bracket

123689413
3889190: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-027-4879

5340-12-371-8193
Dust And Moisture Seal Protective Plug

123718193
1610591015: RNCC: 3 | RNVC: 2

21 May 2007

5340-12-196-6557
Dust And Moisture Seal Protective Cap

121966557
0994210: RNCC: 3 | RNVC: 2
099.4210: RNCC: 5 | RNVC: 2
FJ099.4210: RNCC: 5 | RNVC: 2
KD49818OND: RNCC: 5 | RNVC: 2

28 Jul 1983

5340-12-372-4719
Bow Handle

123724719
9413150039: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-12-322-8093
Plain Solid Disk

123228093
8470 032 151: RNCC: 3 | RNVC: 2
8470032151: RNCC: 5 | RNVC: 2
8470032151: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-354-8623
Double Angle Bracket

123548623
011022887: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-391-8344
Multiple Angle Bracket

123918344
9495040138: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-12-181-7802
Platte

121817802
264-604: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-389-4315
Mounting Bracket

123894315
10199-183000.020.0: RNCC: 2 | RNVC: 2
10199-183000.020.0: RNCC: 3 | RNVC: 2

5 Jul 2012

5340-12-307-7728
Dust And Moisture Seal Protective Cap

123077728
002507064.0: RNCC: 3 | RNVC: 2
002507064.0: RNCC: 3 | RNVC: 9
00250706.4.0: RNCC: 5 | RNVC: 2
00250706.4.0: RNCC: 5 | RNVC: 9

24 Jul 1986

5340-12-169-2028
Mending Plate

121692028
WW410105: RNCC: 3 | RNVC: 2
WW410105: RNCC: 5 | RNVC: 2
WW 410 105: RNCC: 5 | RNVC: 2
WW410105: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-360-3011
Dust And Moisture Seal Protective Cap

123603011
0009643719: RNCC: 3 | RNVC: 2
0009643719: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-172-2019

5340-12-152-0482
Resilient Mount

121520482
8382231112: RNCC: 2 | RNVC: 2
8382231112: RNCC: 3 | RNVC: 2
8382231112: RNCC: 3 | RNVC: 2
8382231112: RNCC: 3 | RNVC: 2
600204: RNCC: 5 | RNVC: 2
0050060004: RNCC: 5 | RNVC: 2
8382231112: RNCC: 5 | RNVC: 2
8382231112: RNCC: 5 | RNVC: 2
121520482: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-189-0393
Retaining Strap

121890393
9854804: RNCC: 3 | RNVC: 2
25043100001000: RNCC: 5 | RNVC: 2
F300 0T 001 2975: RNCC: 6 | RNVC: 9

19 Aug 1981

5340-12-022-6243

5340-12-358-3207
Mending Plate

123583207
2300042-255501.008: RNCC: 2 | RNVC: 2
2300042-255501.008: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-347-7083
Mounting Bracket

123477083
300.009.294: RNCC: 2 | RNVC: 2
300.009.294: RNCC: 3 | RNVC: 2
300.009 294: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-12-377-0570
Retaining Strap

123770570
2300399-060000.014.0: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-12-316-4489
Double Angle Bracket

123164489
P-050761-011: RNCC: 3 | RNVC: 2
P050761-011: RNCC: 5 | RNVC: 2
P-026782-011: RNCC: 5 | RNVC: 2
P026782-011: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-361-0376
Angle Bracket

123610376
J92228089-001: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-195-0298
Mending Plate

121950298
2382-020000.03.0: RNCC: 2 | RNVC: 2
2382-020000.03.0: RNCC: 3 | RNVC: 2
2382-020000-03.0: RNCC: 5 | RNVC: 2
2382-020000.03.0: RNCC: 5 | RNVC: 2
2382-020000-03.0: RNCC: 5 | RNVC: 9
2382-020000-03-0: RNCC: 5 | RNVC: 9

4 Jan 1983

5340-12-701-7009
Angle Bracket

127017009
VG95211-ML-127017009: RNCC: 2 | RNVC: 2
5.12.7230.2240.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-0512
Multiple Angle Bracket

123610512
J28230148-401: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-357-6527
Mechanical Stop

123576527
9997001-992540.000.0: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-320-1287
Nonmetallic Bumper

123201287
VG95092A4X4NR60: RNCC: 2 | RNVC: 2
98102901: RNCC: 3 | RNVC: 2
3890D-NR60-SCHWARZ: RNCC: 3 | RNVC: 2
4.771.279.000E: RNCC: 5 | RNVC: 2
VG95092A4X4NR60: RNCC: 5 | RNVC: 2
98102901: RNCC: 5 | RNVC: 2
3890D: RNCC: 5 | RNVC: 9

11 Dec 1989

5340-12-340-0333
Loop Clamp

123400333
DIN3015-L-G-1-R-10-PP-W4: RNCC: 2 | RNVC: 2
110A-PP-DP-AS-W4: RNCC: 3 | RNVC: 2
DIN3015-LG-1R-10-PP-W4: RNCC: 5 | RNVC: 2

16 Feb 1996

5340-12-356-3267
Mounting Bracket

123563267
2125-125000.13B: RNCC: 2 | RNVC: 2
2125-125000.13B: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-361-2560
Access Cover

123612560
51916050118: RNCC: 3 | RNVC: 2
51.91605-0118: RNCC: 5 | RNVC: 2

10 Sep 2003

5340-12-325-3685
Webbing Strap

123253685
5801435-030940.00: RNCC: 2 | RNVC: 2
5801435-030940.00: RNCC: 3 | RNVC: 2
000-B2-25X2,5X275-BW-RAL6031: RNCC: 6 | RNVC: 9

29 May 1991

5340-12-303-9322
Handrail Bracket

123039322
200446: RNCC: 3 | RNVC: 2
200446: RNCC: 5 | RNVC: 2
24K03-0084-00.018: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-370-9950
Sealing Plug Assembly

123709950
MB600-070: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-12-177-2516
Electrical-Mechanical Equipment Post

121772516
VG95148B8XM4X105-AL: RNCC: 2 | RNVC: 2
5801215-101-007: RNCC: 3 | RNVC: 2
VG95148B8XM4X105-AL: RNCC: 3 | RNVC: 2
5801215-101.007: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-702-2205
Mounting Bracket

127022205
VG95211-ML-127022205: RNCC: 2 | RNVC: 2
30.7601.170: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-2931
Detent Plunger

121982931
C42300-A69-B37: RNCC: 3 | RNVC: 2

11 Jan 1984

5340-12-702-1618
Mounting Bracket

127021618
VG95211-ML-127021618: RNCC: 2 | RNVC: 2
30.6461.20.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-161-3561
Door Handle

121613561
4507-1200: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-345-9738
Access Cover

123459738
4.063.143.0: RNCC: 3 | RNVC: 2
4 063 143: RNCC: 5 | RNVC: 9

26 May 1998

5340-12-388-7912
Butt Hinge Leaf

123887912
10199-183000.013.0: RNCC: 2 | RNVC: 2
10199-183000.013.0: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-384-7433
Extension Drawer Slide

123847433
2601-8: RNCC: 3 | RNVC: 2

24 Mar 2011

5340-12-326-8949
Angle Bracket

123268949
S 721 1 36 053 2: RNCC: 3 | RNVC: 9
4604205086: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-12-317-6800
Retaining Strap

123176800
1000173-380000.003.0: RNCC: 2 | RNVC: 2
1000173-380000.003.0: RNCC: 3 | RNVC: 2

28 Apr 1989

5340-12-196-9447
Friction Catch

121969447
0.32.0641.0: RNCC: 3 | RNVC: 2
0.32.641.0: RNCC: 5 | RNVC: 2

1 Sep 1983

5340-12-346-4207
Mounting Bracket

123464207
2300348-970450.002.0: RNCC: 2 | RNVC: 2
2300348-970450.002.0: RNCC: 3 | RNVC: 2
1808566: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-166-5933
Helical Compression Spring Retainer

121665933
WW401171D: RNCC: 3 | RNVC: 9
WW401171D: RNCC: 5 | RNVC: 2
WW 401 171 D: RNCC: 5 | RNVC: 2
WW 401 171 D: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-357-5182
Access Cover

123575182
0009122835: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-340-4127
Angle Bracket

123404127
182314301: RNCC: 3 | RNVC: 2
E 18 231 4301: RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-384-6127
Butt Hinge

123846127
1055-U7: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-348-0209
Spacing Threaded Standoff

123480209
54.0058.570.14: RNCC: 2 | RNVC: 2
54.0058.570.14: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-348-5151
Threaded Hinged Standoff

123485151
84.8008: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-12-315-2533
Dust And Moisture Seal Protective Plug

123152533
3818110107: RNCC: 3 | RNVC: 2
381 811 01 07: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-332-2544
Nonmetallic Bumper

123322544
4633210006: RNCC: 3 | RNVC: 2

26 Jul 1993

5340-12-305-6126
Flush Lock

123056126
19410010090: RNCC: 3 | RNVC: 2
4067205235: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-12-300-8487
Shimmy Damper

123008487
0009889710: RNCC: 3 | RNVC: 2
000 988 97 10: RNCC: 5 | RNVC: 2

4 Sep 1984

5340-12-172-8492
Split Tubular Clip

121728492
2043880: RNCC: 3 | RNVC: 2
3-448307: RNCC: 5 | RNVC: 2
3-448307: RNCC: 5 | RNVC: 2
3-448307: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-386-8772
Access Cover

123868772
05718227: RNCC: 3 | RNVC: 2
04289740: RNCC: 5 | RNVC: 2
CV191746: RNCC: 5 | RNVC: 2
05718227: RNCC: 5 | RNVC: 2

11 Oct 2011

5340-12-321-0514
Access Cover

123210514
7103401: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-12-369-0338
Permanent Magnet

123690338
840 190-91: RNCC: 3 | RNVC: 2

16 May 2006

5340-12-343-9243
Angle Bracket

123439243
1203943: RNCC: 3 | RNVC: 2

13 Aug 1997

5340-12-010-9049

5340-12-143-2958
Webbing Strap

121432958
RELGH394TZ56: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-166-9335
Barrel Bolt

121669335
100X45MM2512A: RNCC: 3 | RNVC: 2
100X45MM2512A: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-12-394-5383
Mechanical Stop

123945383
4052063134563: RNCC: 3 | RNVC: 2
I012933: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-338-3432
Mounting Plate

123383432
1854901: RNCC: 3 | RNVC: 2
EZ18549: RNCC: 5 | RNVC: 2

26 Jun 1995

5340-12-322-6257
Angle Bracket

123226257
42081811: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-12-350-1230
Turnbuckle Body

123501230
2125-111630.04B: RNCC: 2 | RNVC: 2
2125-111630.04B: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-12-319-5634
Bridge Clamp

123195634
2654-339000.04: RNCC: 2 | RNVC: 2
2654-339000.04: RNCC: 3 | RNVC: 2
2654-339 000.04: RNCC: 5 | RNVC: 9
679-05000000.04: RNCC: 5 | RNVC: 9
2654-339 000.04: RNCC: 5 | RNVC: 9
2654-339 000.04: RNCC: 5 | RNVC: 9
679-05000000.04: RNCC: 5 | RNVC: 9

13 Oct 1989

5340-12-360-0779
Mounting Plate

123600779
9418460011: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-310-2748
Elastic Cord Assembly

123102748
490 119: RNCC: 3 | RNVC: 2
490119: RNCC: 3 | RNVC: 2
5L.3779.001.04: RNCC: 5 | RNVC: 2

4 May 1987

5340-12-360-4768
Headless Straight Rod

123604768
82003003: RNCC: 3 | RNVC: 2
82003003: RNCC: 5 | RNVC: 2

23 May 2003

Load More Results