What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 71 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 71 of 178

5340-12-349-8214
Mounting Bracket

123498214
34 32 2 312 894: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-184-2329
Nonmetallic Bumper

121842329
211415637C: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-316-2929
Mounting Bracket

123162929
5183806: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-090-7001

5340-12-342-3672
Buckle

123423672
42.022.000: RNCC: 3 | RNVC: 9
TGS 50: RNCC: 5 | RNVC: 9

29 Jan 1997

5340-12-183-0536
Angle Bracket

121830536
02480490: RNCC: 3 | RNVC: 2
2480490EE5052-81: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-360-3005
Dust And Moisture Seal Protective Plug

123603005
0009620214: RNCC: 3 | RNVC: 2
0009620214: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-318-1550
Butt Hinge Leaf

123181550
1000192-01 2 40200: RNCC: 2 | RNVC: 2
1000192-01 2 40200: RNCC: 3 | RNVC: 2
1000192-01 2 40200: RNCC: 5 | RNVC: 9

16 Jun 1989

5340-12-328-0947
Mounting Bracket

123280947
5600023-190119.000.0: RNCC: 2 | RNVC: 2
5600023-190119.000.0: RNCC: 3 | RNVC: 2
1271573: RNCC: 5 | RNVC: 2

4 Apr 1992

5340-12-323-4692
Resilient Mount

123234692
2300014-038001.00.0: RNCC: 2 | RNVC: 2
2300014-038001.00.0: RNCC: 3 | RNVC: 2
2300014-038001.00.0: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-12-311-5002
Retaining Clip

123115002
1524680000: RNCC: 3 | RNVC: 2
1524-680-0000-BOLT: RNCC: 5 | RNVC: 2
C4141330: RNCC: 5 | RNVC: 2

10 Sep 1987

5340-12-328-3793
Friction Catch Stud Receptacle

123283793
2653-189340.01: RNCC: 2 | RNVC: 2
2653-189340.01: RNCC: 3 | RNVC: 2

13 May 1992

5340-12-334-0945
Casement Fastener

123340945
1000-U257/15/23/24/991: RNCC: 3 | RNVC: 2
0745231232: RNCC: 5 | RNVC: 2

21 Mar 1994

5340-12-304-4358
Angle Bracket

123044358
537161-3008.000: RNCC: 3 | RNVC: 2
537161-3008.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-382-3806
Casement Fastener

123823806
1102353: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-364-2613
Lock Key

123642613
3814620030: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-372-4801
Flush Lock

123724801
10060037: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-379-6551
Angle Bracket

123796551
531058: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-12-327-4232
Resilient Mount

123274232
50503708: RNCC: 3 | RNVC: 2
061 193 93: RNCC: 3 | RNVC: 2
C06119393E: RNCC: 5 | RNVC: 2
C06119393: RNCC: 5 | RNVC: 2

21 Jan 1992

5340-12-360-8920
Handle Grip

123608920
P70162402000: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-309-6747
Angle Bracket

123096747
2300121-983300.000.0: RNCC: 2 | RNVC: 2
2300121-983300.000.0: RNCC: 3 | RNVC: 2

16 Feb 1987

5340-12-701-5871
Mounting Bracket

127015871
5.12.6500.0530.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-8904
Catch Strike

123308904
2718-300000.002.0: RNCC: 2 | RNVC: 2
2718-300000.002.0: RNCC: 3 | RNVC: 2

19 Feb 1993

5340-12-027-4000

5340-12-193-9012
Electrical-Mechanical Equipment Post

121939012
VG95148C6XM3X10-ST: RNCC: 2 | RNVC: 2
0801-4100: RNCC: 3 | RNVC: 2
0745310011: RNCC: 3 | RNVC: 2
VG95148C6XM3X10-ST: RNCC: 3 | RNVC: 2

13 Sep 1982

5340-12-148-3488
Expansion Plug

121483488
DIN443-12-ST-ROH: RNCC: 2 | RNVC: 2
39030: RNCC: 5 | RNVC: 2
0009971320: RNCC: 5 | RNVC: 2
12DIN443R0H: RNCC: 5 | RNVC: 2
12DIN443: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-3765
Webbing Strap

121763765
23290-151093: RNCC: 2 | RNVC: 2
23290-151093: RNCC: 3 | RNVC: 2
23290-151093: RNCC: 5 | RNVC: 2
23290-151093: RNCC: 5 | RNVC: 9
23290-151093: RNCC: 5 | RNVC: 9
23290-151093: RNCC: 5 | RNVC: 9
000-B2-25X2,5X270-BW-RAL0631: RNCC: 6 | RNVC: 9

27 Nov 1978

5340-12-345-7341
Detent Plunger

123457341
NB2212-606: RNCC: 3 | RNVC: 2

21 Apr 1998

5340-12-384-0800
Mechanical Stop

123840800
5981-180000.012.0: RNCC: 2 | RNVC: 2
5981-180000.012.0: RNCC: 3 | RNVC: 2

19 Jan 2011

5340-12-164-8939
Loop Clamp

121648939
F6TAN15802-1-4544-9: RNCC: 3 | RNVC: 2
F6TAN15802N: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-357-5346
Mounting Bracket

123575346
2500266-198820.000.0: RNCC: 2 | RNVC: 2
2500266-198820.000.0: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-701-9206
Loop Clamp

127019206
TK-4-6-25-KD 24 GOST 1769-72: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-3700
Clamping Catch

121743700
VG95528B140-6-10ST: RNCC: 2 | RNVC: 2
VG95528B140-6-10ST: RNCC: 3 | RNVC: 2
2803-2821-2833: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-701-7122
Retaining Band

127017122
VG95211-ML-127017122: RNCC: 2 | RNVC: 2
5.12.7601.3131.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-2708
Spring Tension Clip

121922708
65.7091.100.01-A001: RNCC: 3 | RNVC: 2
65.7091.100.01: RNCC: 5 | RNVC: 2
207389: RNCC: 5 | RNVC: 2
65-7091-100-01A001: RNCC: 5 | RNVC: 2

7 Apr 1982

5340-12-334-7153
Nonmetallic Bumper

123347153
CS043P: RNCC: 3 | RNVC: 2
VD43P: RNCC: 5 | RNVC: 2
VD 43 P: RNCC: 5 | RNVC: 2
VD34P: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-12-197-0527
Butt Hinge Leaf

121970527
6132.998.3: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-307-9961
Nonmetallic Bumper

123079961
2418.2800.2: RNCC: 3 | RNVC: 2

18 Aug 1986

5340-12-394-2424
Loop Clamp

123942424
PAN4268-5-2: RNCC: 3 | RNVC: 2

13 Nov 2013

5340-12-178-6740
Nonmetallic Bumper

121786740
0009883311: RNCC: 2 | RNVC: 2
54001605: RNCC: 3 | RNVC: 2
3018032/60MMN387: RNCC: 3 | RNVC: 2
0009883311: RNCC: 5 | RNVC: 2
VG95364-C20X16-FPM60ST: RNCC: 5 | RNVC: 9

9 May 1979

5340-12-326-2771
Mounting Plate

123262771
708-121100-901-0: RNCC: 3 | RNVC: 2
708-121100-901-0: RNCC: 5 | RNVC: 2

26 Aug 1991

5340-12-701-9886
Threaded End Tensioning Tie Rod

127019886
VG95211-ML-127019886: RNCC: 2 | RNVC: 2
155N1220-28CH2-880: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-309-7409
Access Cover

123097409
588.10-200000-014: RNCC: 3 | RNVC: 2
121202: RNCC: 5 | RNVC: 2

20 Feb 1987

5340-12-357-5025
Mounting Bracket

123575025
J92228127-404: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-300-7950
Turnbuckle Body

123007950
23111-0806.01: RNCC: 2 | RNVC: 2
23111-0806.01: RNCC: 3 | RNVC: 2
23111-0806.01: RNCC: 5 | RNVC: 9
23111-0806-01: RNCC: 5 | RNVC: 9
23111-0806.01: RNCC: 5 | RNVC: 9
23111-0806-01: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-702-0661
Mounting Bracket

127020661
VG95211-ML-127020661: RNCC: 2 | RNVC: 2
30.0603.23: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-363-9076
Fuehrungs- Schiene

123639076
J92226820-003: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-383-4948
Retaining Strap

123834948
SMJ 234-001-125-300: RNCC: 3 | RNVC: 2
SMJ234-001-125-300: RNCC: 5 | RNVC: 2

28 Oct 2010

5340-12-384-8733
Mounting Bracket

123848733
F1.1643-00-01-40.00-01: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-322-6336
Loop Clamp

123226336
00584-10840-01-006: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-12-375-7132
Access Cover

123757132
4015181: RNCC: 3 | RNVC: 2
03-123976/00: RNCC: 5 | RNVC: 2

26 Jun 2008

5340-12-180-2744
Angle Bracket

121802744
81974860192: RNCC: 3 | RNVC: 2

31 Aug 1979

5340-12-321-1632
Mounting Bracket

123211632
23290-267210.002: RNCC: 2 | RNVC: 2
9835144: RNCC: 3 | RNVC: 2
V4940100152: RNCC: 5 | RNVC: 2
23290-267210.002: RNCC: 5 | RNVC: 9
9835144: RNCC: 5 | RNVC: 9

6 Apr 1990

5340-12-385-4639
Bumper

123854639
2122400818: RNCC: 3 | RNVC: 2
2122400818: RNCC: 5 | RNVC: 2

7 Jun 2011

5340-12-357-0088
Mounting Bracket

123570088
8812370840: RNCC: 2 | RNVC: 2
8812370840: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-165-2196
Retaining Band

121652196
2369: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-359-0706
Rod End Clevis

123590706
00001115041: RNCC: 3 | RNVC: 2

13 Dec 2002

5340-12-366-3109
Manual Control Lever

123663109
4456999: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-12-366-2962
Manual Control Lever

123662962
105075: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-336-0717
Nonmetallic Bumper

123360717
10 0017 197: RNCC: 3 | RNVC: 2
100017197: RNCC: 5 | RNVC: 2
10 SK02 998: RNCC: 5 | RNVC: 9

18 Oct 1994

5340-12-345-4839
Mounting Bracket

123454839
54.0053.665.00: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-12-363-5726
Rod Retainer Clip

123635726
3008160051: RNCC: 3 | RNVC: 2

6 Jul 2004

5340-12-022-6076

5340-12-310-4106
Pipe Bracket

123104106
81.15501.5374: RNCC: 3 | RNVC: 2

19 May 1987

5340-12-146-8020
Spring Tension Clip

121468020
B250-5-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-324-1018
Mounting Bracket

123241018
160-26741-40: RNCC: 3 | RNVC: 2
160-26741-40: RNCC: 5 | RNVC: 9

22 Jan 1991

5340-12-330-2949
Mounting Bracket

123302949
160-75844: RNCC: 3 | RNVC: 2
160-75844: RNCC: 5 | RNVC: 9

27 Nov 1992

5340-12-378-4289
Mounting Plate

123784289
SV35541: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-311-8495
Dust And Moisture Seal Protective Cap

123118495
0213 3628: RNCC: 3 | RNVC: 2
02133628EE0141-27: RNCC: 5 | RNVC: 2

22 Oct 1987

5340-12-334-1238
Loop Clamp

123341238
23131241872: RNCC: 3 | RNVC: 9

22 Mar 1994

5340-12-375-7607
Loop Clamp

123757607
000000000324: RNCC: 3 | RNVC: 2
000000000324: RNCC: 5 | RNVC: 2

2 Jul 2008

5340-12-315-3543
Sealing Plug Assembly

123153543
1463203350: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-355-1422
Dust And Moisture Seal Protective Cap-Plug

123551422
4609970686: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-344-9967
Mounting Plate

123449967
160-25541-63: RNCC: 3 | RNVC: 2
160-25541-63: RNCC: 5 | RNVC: 9

20 Jan 1998

5340-12-344-6677
Mounting Bracket

123446677
78027 61060: RNCC: 2 | RNVC: 2
7802761060: RNCC: 3 | RNVC: 2
78027 61060: RNCC: 5 | RNVC: 9

26 Nov 1997

5340-12-316-2117
Mending Plate

123162117
53.1848.005.05: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-364-2450
Mounting Bracket

123642450
4053320140: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-323-1134
Dust And Moisture Seal Protective Plug

123231134
272079: RNCC: 3 | RNVC: 2
272079: RNCC: 5 | RNVC: 2
272079: RNCC: 5 | RNVC: 9

24 Oct 1990

5340-12-363-5056
Rod End Connector

123635056
712141: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-362-9785
Mounting Bracket

123629785
2300042-992912.000: RNCC: 2 | RNVC: 2
2300042-992912.000: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-364-4355
Manual Control Handle

123644355
42491/6670: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-12-307-8894
Turnbuckle

123078894
DIN82004-E1-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-E1-VERZINKT: RNCC: 3 | RNVC: 2

7 Aug 1986

5340-12-011-5332

5340-12-186-8056
Electrical-Mechanical Equipment Post

121868056
VG95148B5XM2,5X35-1.4301: RNCC: 2 | RNVC: 2
VG95148B5XM2,5X35-1.4301: RNCC: 3 | RNVC: 2
028-951000-02-0: RNCC: 3 | RNVC: 2

6 Feb 1981

5340-12-703-3116
Mending Plate

127033116
VG95211-ML-127033116: RNCC: 2 | RNVC: 2
5.12.4806.5500.37: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-190-8202
Resilient Mount

121908202
1040723902: RNCC: 3 | RNVC: 2
21055-1BSMN55: RNCC: 5 | RNVC: 2
21055-1SM550: RNCC: 5 | RNVC: 2
S9/0405 POS. 12: RNCC: 5 | RNVC: 2

16 Dec 1981

5340-12-385-2303
Rod End Clevis

123852303
F1.1787-30-20-20.00-01: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-172-1668
Angle Bracket

121721668
14021-12081-02: RNCC: 3 | RNVC: 2
893803: RNCC: 5 | RNVC: 2

27 Dec 1977

5340-12-325-3809
Access Cover

123253809
DEX 514 278 011: RNCC: 3 | RNVC: 2
DEX514-278-011: RNCC: 5 | RNVC: 2

29 May 1991

5340-12-314-4313
Mounting Bracket

123144313
6205401473: RNCC: 3 | RNVC: 2
620 540 14 73: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-321-1305
Plug Button

123211305
03769301: RNCC: 3 | RNVC: 2
03769301.514: RNCC: 5 | RNVC: 2

30 Mar 1990

5340-12-358-9700
Mounting Bracket

123589700
3816822986: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-305-8607
Sliding Door Track Bracket

123058607
211843406E: RNCC: 3 | RNVC: 2

27 Dec 1985

5340-12-361-7315
Angle Bracket

123617315
T622M1003222: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-12-183-8095
Spring Tension Clip

121838095
111937591: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-183-3420
Mounting Bracket

121833420
4820036101: RNCC: 3 | RNVC: 2

9 Apr 1980

5340-12-328-8816
Nonmetallic Bumper

123288816
TAB002886: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-372-0029
Multiple Angle Bracket

123720029
2605762: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-193-5606
Sealing Plug Assembly

121935606
4062650347: RNCC: 3 | RNVC: 2

3 Aug 1982

5340-12-188-7803
Retaining Band

121887803
T50513: RNCC: 3 | RNVC: 2
T50513: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-350-0065
Dust And Moisture Seal Protective Plug

123500065
88960020081: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-352-9520
Mounting Plate

123529520
CBD45402P03: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-12-010-2340

5340-12-350-9674
Mounting Plate

123509674
RU54007: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-12-355-4009
Multiple Angle Bracket

123554009
4615405273: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-351-5098
Mending Plate

123515098
4618991911: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-351-5078
Spring Tension Clip

123515078
4638800093: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-176-2571
Hasp Staple

121762571
183813767: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-091-7493

5340-12-358-7751
Runner

123587751
EZ152020: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-358-8187
Lock-Release Lever

123588187
DF 408 309 AR: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-300-7856
Lock-Release Lever

123007856
0019-1005-160: RNCC: 3 | RNVC: 2
0019-1005-160: RNCC: 5 | RNVC: 9

30 Aug 1984

5340-12-340-0086
Mounting Bracket

123400086
6.4241-5: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-12-190-4272
Pad Eye

121904272
1000078-610100: RNCC: 2 | RNVC: 2
1000078-610100: RNCC: 3 | RNVC: 2
1000078-610100: RNCC: 5 | RNVC: 9

26 Nov 1981

5340-12-317-1431
Tee Hinge

123171431
400165520: RNCC: 2 | RNVC: 2
400165520: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-12-370-1678
Spring Loaded Cylinder Fastener

123701678
FG 1010: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-12-312-2502
Angle Bracket

123122502
100000635: RNCC: 2 | RNVC: 2
100000635: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-12-184-2334
Nonmetallic Bumper

121842334
N0200271: RNCC: 3 | RNVC: 2
N020027.1: RNCC: 5 | RNVC: 9

8 Jul 1980

5340-12-175-7003
Spring Tension Clip

121757003
CF 453 446 A: RNCC: 2 | RNVC: 2
CF 453 446 A: RNCC: 3 | RNVC: 2
CF 453 446: RNCC: 5 | RNVC: 2
CF 453 446 A: RNCC: 5 | RNVC: 2
CF453446: RNCC: 5 | RNVC: 2
CF 453 446: RNCC: 5 | RNVC: 2
CF 453 446 A: RNCC: 5 | RNVC: 2
CF 453 446: RNCC: 5 | RNVC: 2
CF453446: RNCC: 5 | RNVC: 2
CF 453 446: RNCC: 5 | RNVC: 2

11 Oct 1978

5340-12-166-4237
Rod End Connector

121664237
1023 001 B14: RNCC: 3 | RNVC: 2
10230012: RNCC: 5 | RNVC: 2
5.70-4-1: RNCC: 5 | RNVC: 9

7 Sep 1976

5340-12-350-4557
Section Block Clamp

123504557
JN0413ECJ56: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-193-9093
Resilient Mount

121939093
PAN5174T04: RNCC: 3 | RNVC: 2

13 Sep 1982

5340-12-380-2964
Webbing Strap

123802964
4255800082: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-12-373-3486
Clamping Catch

123733486
L524M1023101: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-12-328-6614
Protection Bellows

123286614
281721587: RNCC: 3 | RNVC: 2
281721 587: RNCC: 5 | RNVC: 2

12 Jun 1992

5340-12-172-6635
Angle Bracket

121726635
04455099: RNCC: 3 | RNVC: 2
4455099EE5087-72: RNCC: 5 | RNVC: 2

8 Feb 1978

5340-12-091-2533

5340-12-331-4162
Angle Bracket

123314162
40195310: RNCC: 3 | RNVC: 2
4019531000: RNCC: 5 | RNVC: 9

4 May 1993

5340-12-199-3122
Retaining Strap

121993122
8399950068: RNCC: 3 | RNVC: 2

11 Apr 1984

5340-12-300-7460
Nonmetallic Bumper

123007460
A11A532440002: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-190-8756
Helical Compression Spring Seat

121908756
2410320057: RNCC: 3 | RNVC: 2
8690740800: RNCC: 5 | RNVC: 2

21 Dec 1981

5340-12-356-6304
Mounting Bracket

123566304
4374203686: RNCC: 3 | RNVC: 2
437 420 36 86: RNCC: 5 | RNVC: 9

18 Mar 2002

5340-12-358-9234
Double Angle Bracket

123589234
3224280140: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-376-7153
Mounting Bracket

123767153
S334M6007101: RNCC: 3 | RNVC: 2

30 Oct 2008

5340-12-363-0455
Angle Bracket

123630455
MBBN3132AN: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-366-4263
Mounting Bracket

123664263
2 0071-821: RNCC: 3 | RNVC: 2
2 0071-821: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-12-301-2008
Angle Bracket

123012008
1423-200.49(2): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-191-6647
Helical Compression Spring Seat

121916647
1733 101 002: RNCC: 3 | RNVC: 2
0003230767: RNCC: 5 | RNVC: 2
721 1 54 026 1: RNCC: 5 | RNVC: 9

23 Feb 1982

5340-12-390-2837
Mounting Bracket

123902837
120D256053.000.0: RNCC: 2 | RNVC: 2
120D256053.000.0: RNCC: 3 | RNVC: 2

25 Oct 2012

5340-12-301-1987
Retaining Strap

123011987
1423-910.20(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-391-0248
Access Cover

123910248
917.287.4: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-12-328-9070
Handle Grip

123289070
4V4647-A: RNCC: 3 | RNVC: 2
4V4647-A: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-328-5657
Nonmetallic Bumper

123285657
4607270090: RNCC: 3 | RNVC: 2
721 160 045 1: RNCC: 5 | RNVC: 9

3 Jun 1992

5340-12-361-4308
Spacing Threaded Standoff

123614308
1873-820000.002.0: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-178-0175
Mounting Bracket

121780175
81974800548: RNCC: 3 | RNVC: 2
81.97480.0548: RNCC: 5 | RNVC: 2

14 Mar 1979

5340-12-352-2361
Shimmy Damper

123522361
5205690: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-12-361-0803
Mounting Bracket

123610803
0853 9350.039: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-361-0530
Mounting Bracket

123610530
2300246-261640.00.0: RNCC: 2 | RNVC: 2
2300246-261640.00.0: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-343-5660
Angle Bracket

123435660
56021300020: RNCC: 3 | RNVC: 2
F300 0T 022 5271: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-311-9447
Plain Solid Disk

123119447
105-45645.09: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-12-190-8766
Helical Compression Spring Seat

121908766
2410320070: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-377-5125
Block Clamp

123775125
SP1D12/6PPGDAS: RNCC: 3 | RNVC: 2
PE30809: RNCC: 5 | RNVC: 2

21 Jan 2009

5340-12-199-0853
Mending Plate

121990853
135-01/96215: RNCC: 3 | RNVC: 2
135-01/96215: RNCC: 5 | RNVC: 9

23 Mar 1984

5340-12-302-8133
Metal Runner

123028133
556-526000.030: RNCC: 3 | RNVC: 2
556-526000-030: RNCC: 5 | RNVC: 2

4 Feb 1985

5340-12-317-7451
Mounting Bracket

123177451
P-296883-449: RNCC: 3 | RNVC: 2
P296883-449: RNCC: 5 | RNVC: 2

8 May 1989

5340-12-196-4432
Butt Hinge

121964432
25.5012.076-00: RNCC: 3 | RNVC: 2

7 Jul 1983

5340-12-199-4097
Retaining Strap

121994097
52.9794.002.07: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-318-8724
Angle Bracket

123188724
81436405090: RNCC: 3 | RNVC: 2
81.43640.5090: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-307-3431
Hand Crank

123073431
4241.2.0.00AP: RNCC: 3 | RNVC: 2
2996.65.63: RNCC: 5 | RNVC: 2

6 Jun 1986

5340-12-339-0208
Casement Fastener

123390208
05.41.012.00: RNCC: 3 | RNVC: 2
0008630114: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-335-6602
Pipe Hanger

123356602
4215015720: RNCC: 3 | RNVC: 2

8 Sep 1994

5340-12-130-1155

5340-12-339-0683
Expansion Shield

123390683
62306: RNCC: 3 | RNVC: 2
HM 4X32S: RNCC: 5 | RNVC: 2
R14100: RNCC: 5 | RNVC: 2

5 Oct 1995

5340-12-344-3166
Multiple Angle Bracket

123443166
111G10012: RNCC: 3 | RNVC: 2
111 G10 012 E1: RNCC: 5 | RNVC: 2

15 Oct 1997

5340-12-163-9568
Electrical-Mechanical Equipment Post

121639568
105-60533: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-339-0682
Expansion Shield

123390682
53263: RNCC: 3 | RNVC: 2
FU 8X40: RNCC: 5 | RNVC: 2
53263: RNCC: 5 | RNVC: 2
52263: RNCC: 5 | RNVC: 9

5 Oct 1995

5340-12-181-2995
Spring Tension Clip

121812995
A0022131403: RNCC: 3 | RNVC: 2

12 Nov 1979

5340-12-164-0368
Pipe Bracket

121640368
105-61381: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-093-6879

5340-12-322-2329
Angle Bracket

123222329
272.308 583: RNCC: 2 | RNVC: 2
272.308.583: RNCC: 3 | RNVC: 2
272.308 583: RNCC: 5 | RNVC: 9

3 Aug 1990

5340-12-326-9223
Retaining Strap

123269223
164492: RNCC: 3 | RNVC: 2

11 Nov 1991

5340-12-025-0605

5340-12-159-7780
Quick Release Plunger

121597780
1204 207 127: RNCC: 3 | RNVC: 2
1204207127: RNCC: 5 | RNVC: 2
1204207127: RNCC: 5 | RNVC: 9
100CP0475: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-351-6133
Loop Clamp

123516133
JN0230-28: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-12-163-9566
Butt Hinge Leaf

121639566
105-21401.07A: RNCC: 3 | RNVC: 2
105-21401-07A: RNCC: 5 | RNVC: 2
105-21401.07: RNCC: 5 | RNVC: 2
105-21401-07: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-389-0599
Manual Control Lever

123890599
LE1400-4: RNCC: 3 | RNVC: 2
51.11605-0199: RNCC: 5 | RNVC: 2
51116050199: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-385-4228
Double Angle Bracket

123854228
5562033040: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-320-7604
Lock-Release Lever

123207604
335907-8037.000: RNCC: 2 | RNVC: 2
335907-8037.000: RNCC: 3 | RNVC: 2
335907-8037.000: RNCC: 5 | RNVC: 9

14 Feb 1990

5340-12-310-9481
Double Angle Bracket

123109481
2300106-240300.04: RNCC: 2 | RNVC: 2
2300106-240300.04: RNCC: 3 | RNVC: 2
2300106-240300.04: RNCC: 5 | RNVC: 9
2300106-240300.04: RNCC: 5 | RNVC: 9

10 Jul 1987

5340-12-306-5802
Extension Drawer Slide

123065802
423.12.578: RNCC: 3 | RNVC: 2

12 Mar 1986

5340-12-314-3444
Access Door

123143444
6724376: RNCC: 3 | RNVC: 2
67 24376: RNCC: 5 | RNVC: 2
6724376: RNCC: 5 | RNVC: 9

29 Jun 1988

5340-12-092-0926

5340-12-357-4706
Butt Hinge

123574706
P70163100006: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-12-342-1572
Mounting Plate

123421572
5611530141: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-024-0773

5340-12-193-8074
Nonmetallic Bumper

121938074
1420026003: RNCC: 3 | RNVC: 2

1 Sep 1982

5340-12-358-9516
Mounting Bracket

123589516
0009911254: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-348-2516
Mounting Bracket

123482516
220328-3000: RNCC: 3 | RNVC: 2

17 May 1999

5340-12-011-5013

5340-12-315-1905
Angle Bracket

123151905
3872900433: RNCC: 3 | RNVC: 2
387 290 04 33: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-351-7721
Section Block Clamp

123517721
JN0413CE34: RNCC: 3 | RNVC: 2

22 Aug 2000

5340-12-349-7960
Loop Clamp

123497960
61 13 1 369 668: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-179-5901
Double Angle Bracket

121795901
4355220940: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-367-4426
Dust And Moisture Seal Protective Cap

123674426
GA1412: RNCC: 3 | RNVC: 2

19 Aug 2005

5340-12-367-1677
Access Cover

123671677
A2547561500400: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-12-349-7831
Retaining Strap

123497831
T290M2202267: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-315-7202
Mounting Bracket

123157202
0224 8681: RNCC: 3 | RNVC: 2
2248681ED0150-63: RNCC: 5 | RNVC: 2
0336 3601: RNCC: 5 | RNVC: 9
03363601ED0150-26: RNCC: 5 | RNVC: 9
3363601ED0150-26: RNCC: 5 | RNVC: 9

23 Nov 1988

5340-12-194-6758
Angle Bracket

121946758
C20170-A82-C85: RNCC: 3 | RNVC: 2
C20170A82C85: RNCC: 5 | RNVC: 2
T.GRPL.82,T85: RNCC: 5 | RNVC: 2
TFS72-33085: RNCC: 5 | RNVC: 2

25 Nov 1982

5340-12-364-1448
Lock Key

123641448
3756630007: RNCC: 3 | RNVC: 2
5715.0960.0: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-12-325-4076
Bow Handle

123254076
0.050.453.9: RNCC: 3 | RNVC: 2

4 Jun 1991

5340-12-327-2497
Bow Handle

123272497
582A651: RNCC: 3 | RNVC: 2
GHE 582 A 651: RNCC: 5 | RNVC: 2

20 Dec 1991

5340-12-341-7482
Catch Strike

123417482
2500255-322700.02.0: RNCC: 2 | RNVC: 2
2500255-322700.02.0: RNCC: 3 | RNVC: 2

23 Oct 1996

5340-12-302-7500
Angle Bracket

123027500
2300109-970108.000.0: RNCC: 2 | RNVC: 2
2300109-970108.000.0: RNCC: 3 | RNVC: 2
2300109-970108.000.0: RNCC: 3 | RNVC: 2
2300109-970108.000.0: RNCC: 5 | RNVC: 9

28 Jan 1985

5340-12-310-9117
Dust And Moisture Seal Protective Cap

123109117
127.070.3: RNCC: 3 | RNVC: 2
0009882735: RNCC: 5 | RNVC: 2
31100148040: RNCC: 5 | RNVC: 2
1900508005: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-12-358-6827
Angle Bracket

123586827
2481-390105.000.0: RNCC: 2 | RNVC: 2
2481-390105.000.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-347-2208
Flush Bolt

123472208
4114242J: RNCC: 3 | RNVC: 2
183-444: RNCC: 5 | RNVC: 2
183-444: RNCC: 5 | RNVC: 2

12 Nov 1998

5340-12-358-9232
Mounting Bracket

123589232
3854280240: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-345-4456
Mounting Bracket

123454456
54.0053.241.00: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-353-1487
Mounting Plate

123531487
8801500873: RNCC: 3 | RNVC: 2
880 150 08 73: RNCC: 5 | RNVC: 2

2 Feb 2001

5340-12-197-9107
Angle Bracket

121979107
CF 325 706 B: RNCC: 3 | RNVC: 2
CF 325 706 A: RNCC: 5 | RNVC: 2
CF 325 706 B: RNCC: 5 | RNVC: 2
CF 325 706 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-303-9175
Resilient Mount

123039175
E1E 42S 77 EC: RNCC: 3 | RNVC: 2
E1E42S77EC: RNCC: 5 | RNVC: 2
VE42 HDS 77 EC: RNCC: 5 | RNVC: 2
VE42HDS77EC: RNCC: 5 | RNVC: 2
C 3695 666 06: RNCC: 5 | RNVC: 2
C 3695 666 06: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-340-0603
Angle Bracket

123400603
1216 2575: RNCC: 3 | RNVC: 2
6.232.0.982.008.4: RNCC: 5 | RNVC: 9

22 Feb 1996

5340-12-393-0275
Mounting Bracket

123930275
1030124-260000.004.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-371-5711
Spring Tension Clip

123715711
2300397-970157.002.0: RNCC: 3 | RNVC: 2
1809664: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-197-0219
Nonmetallic Bumper

121970219
6480.001.4: RNCC: 3 | RNVC: 2

12 Sep 1983

5340-12-377-7128
Bumper

123777128
310863: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-12-025-0158

5340-12-093-7558

5340-12-342-0296
Nonmetallic Bumper

123420296
DIN95364-A9X7-M4X12-NR55ST: RNCC: 2 | RNVC: 2
530000-9X7-M4X12.NR55.ST: RNCC: 5 | RNVC: 2

3 Dec 1996

5340-12-348-9478
Mending Plate

123489478
680003/7327-29-00-06: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-12-332-6754
Angle Bracket

123326754
81429020184: RNCC: 2 | RNVC: 2
81429020184: RNCC: 3 | RNVC: 2
81.42902.0184: RNCC: 5 | RNVC: 2

3 Sep 1993

5340-12-388-1642
Support Hook

123881642
0305 010: RNCC: 3 | RNVC: 2
0305 001: RNCC: 3 | RNVC: 9
NY.WH 75: RNCC: 5 | RNVC: 2
0305 001: RNCC: 5 | RNVC: 2
NY.WH 75: RNCC: 5 | RNVC: 2

29 Feb 2012

5340-12-374-2665
Sliding Block

123742665
L521M1059231: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-12-367-1924
Butt Hinge

123671924
S252M3172211: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-354-9033
Retaining Strap

123549033
05.075.06.16.0: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-380-5851
Runner

123805851
500100-3: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-12-318-9643
Dust And Moisture Seal Protective Cap

123189643
250/6,2: RNCC: 3 | RNVC: 2
GPN250/6,2: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-324-4180
Metallic Bumper

123244180
VY906565-6: RNCC: 3 | RNVC: 2
VP1.656-6: RNCC: 5 | RNVC: 2

14 Feb 1991

5340-12-302-9414
Nonmetallic Bumper

123029414
A-226 991: RNCC: 3 | RNVC: 2

11 Feb 1985

5340-12-315-9064
Mounting Bracket

123159064
54.0026.198.00: RNCC: 3 | RNVC: 2
54002619800: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-190-9387
Nonmetallic Bumper

121909387
3523260081: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-310-1760
Friction Catch

123101760
631800: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-12-168-3602
Dust And Moisture Seal Protective Cap

121683602
WW 415 204: RNCC: 2 | RNVC: 2
WW 415 204: RNCC: 3 | RNVC: 9
WW415204: RNCC: 5 | RNVC: 2
WW 415 204: RNCC: 5 | RNVC: 2
WW415204: RNCC: 5 | RNVC: 9

10 Mar 1977

5340-12-163-3195
Access Cover

121633195
23290-013012.002: RNCC: 2 | RNVC: 2
23290-013012.002: RNCC: 3 | RNVC: 2
23290-013012-002: RNCC: 5 | RNVC: 2
23290-013012-002: RNCC: 5 | RNVC: 9
23290-013012.002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-1949
Angle Bracket

123051949
5801763-120000.001: RNCC: 2 | RNVC: 2
5801763-120000.001: RNCC: 3 | RNVC: 2
5801763-120000.001: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-373-8723
Snap Hook

123738723
06500090: RNCC: 2 | RNVC: 2
06500090: RNCC: 3 | RNVC: 2
DO-07-200.00: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-12-393-0217
Mounting Bracket

123930217
1030105-820010.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-320-6588
Dust And Moisture Seal Protective Plug

123206588
36311242142: RNCC: 3 | RNVC: 2
1242142: RNCC: 5 | RNVC: 2
36 31 1 242 142: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-192-9404
Spring Loaded Cylinder Fastener

121929404
3512 118 1280 1: RNCC: 3 | RNVC: 2
3512 118 1280: RNCC: 5 | RNVC: 2
351211812801: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-161-2168
Loop Clamp

121612168
LN29849-6: RNCC: 2 | RNVC: 2
6LN29849: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-314-8728
Retaining Strap

123148728
DIN72573-1X26-ST-VERZINKT: RNCC: 2 | RNVC: 2
BSL1X26/72573VPE: RNCC: 3 | RNVC: 2
DIN72573-1X26-ST-VERZINKT: RNCC: 3 | RNVC: 2
6100008-74.10: RNCC: 5 | RNVC: 9

20 Aug 1988

5340-12-144-9528
Turnbuckle Body

121449528
LN29601C06-335: RNCC: 2 | RNVC: 2
20X1-5X335M12X1-5LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-6982
Loop Clamp

121866982
2300109-050038.000.0: RNCC: 2 | RNVC: 2
2300109-050038.000.0: RNCC: 3 | RNVC: 2
2300109-050038-000-0: RNCC: 5 | RNVC: 9
2300109-050038.000.0: RNCC: 5 | RNVC: 9
2300109-050038-000-0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-702-5322
Mounting Plate

127025322
VG95211-ML-127025322: RNCC: 2 | RNVC: 2
5.51.7060.0040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-5831
Double Angle Bracket

123655831
J28130153-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-391-1536
Loop Clamp

123911536
6572S-PA: RNCC: 3 | RNVC: 2
90E0334-14: RNCC: 5 | RNVC: 2
6572SPA: RNCC: 5 | RNVC: 2

21 Feb 2013

5340-12-312-5916
Angle Bracket

123125916
615.06-02-00-00-018: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-349-6682
Retaining Strap

123496682
RD-00-120000: RNCC: 3 | RNVC: 2

16 Dec 1999

5340-12-358-7289
Helical Compression Spring Seat

123587289
17.10.06: RNCC: 3 | RNVC: 2
17-10-06: RNCC: 5 | RNVC: 9

8 Nov 2002

5340-12-313-9095
Webbing Strap

123139095
2500222-201500.00: RNCC: 2 | RNVC: 2
0106.25000.060: RNCC: 3 | RNVC: 2

19 May 1988

5340-12-389-0664
Expansion Shield

123890664
920677: RNCC: 3 | RNVC: 2
07400727: RNCC: 5 | RNVC: 2
920677: RNCC: 5 | RNVC: 2
2500600993: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-310-9216
Access Cover

123109216
78203 51210: RNCC: 2 | RNVC: 2
7820351210: RNCC: 3 | RNVC: 2
78203 51210: RNCC: 5 | RNVC: 9

9 Jul 1987

5340-12-325-5228
Access Cover

123255228
4900064-531.004: RNCC: 3 | RNVC: 2

13 Jun 1991

5340-12-314-0877
Clamping Catch

123140877
81032048: RNCC: 3 | RNVC: 2
8103204800: RNCC: 5 | RNVC: 2

4 Jun 1988

5340-12-358-0733
Mounting Plate

123580733
2300042-255465.001: RNCC: 2 | RNVC: 2
2300042-255465.001: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-192-6768
Shimmy Damper

121926768
1164661382: RNCC: 3 | RNVC: 2

17 May 1982

5340-12-333-3531
Mounting Bracket

123333531
5802017-701710.00: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-12-325-3458
Headless Straight Rod

123253458
4209618979: RNCC: 3 | RNVC: 2
4209018979: RNCC: 5 | RNVC: 2

28 May 1991

5340-12-323-3708
Helical Compression Spring Seat

123233708
1020530225: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-12-386-4291
Dust And Moisture Seal Boot

123864291
0109975382: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-140-6155

5340-12-383-4126
Block Clamp

123834126
1542311: RNCC: 3 | RNVC: 2
582-961002.00.0: RNCC: 5 | RNVC: 2

18 Oct 2010

5340-12-315-7225
Dust And Moisture Seal Protective Cap

123157225
99366: RNCC: 3 | RNVC: 2
NR.6893 GR. 6: RNCC: 5 | RNVC: 2
BEST NR 6893-5: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-393-0297
Angle Bracket

123930297
1030105-206100.005.0: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-380-7282
Loop Clamp

123807282
218 PPH DP AS M W2: RNCC: 3 | RNVC: 2
21243: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-12-301-9244
Lock-Release Lever

123019244
116 077: RNCC: 3 | RNVC: 2
116077: RNCC: 5 | RNVC: 2
116403/A: RNCC: 5 | RNVC: 2
4275: RNCC: 5 | RNVC: 2
116 077: RNCC: 5 | RNVC: 2
116077: RNCC: 5 | RNVC: 9
116403/A: RNCC: 5 | RNVC: 9
4275: RNCC: 5 | RNVC: 9
116 077: RNCC: 5 | RNVC: 9

17 Nov 1984

5340-12-368-0746
Angle Bracket

123680746
2300232-971800.002.0: RNCC: 2 | RNVC: 2
2300232-971800.002.0: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-368-8061
Rim Latch Set

123688061
1030010-180820.000.0: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-12-316-7574
Kunst Gleitschiene

123167574
5800777-8300.02: RNCC: 2 | RNVC: 2
5800777-8300.02: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-371-8084
Mounting Plate

123718084
C42393A77C58: RNCC: 3 | RNVC: 2

18 May 2007

5340-12-339-0360
Dust And Moisture Seal Protective Plug

123390360
V35X20L,86 SCHWARZ: RNCC: 3 | RNVC: 2
V35X20L,86: RNCC: 5 | RNVC: 2
100061654: RNCC: 5 | RNVC: 2
0009875245: RNCC: 5 | RNVC: 2

29 Sep 1995

5340-12-351-0480
Mounting Plate

123510480
2500113-5400.01: RNCC: 2 | RNVC: 2
2500113-5400.01: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-346-4784
Metallic Bumper

123464784
2770.26.82: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-12-378-0113
Mounting Bracket

123780113
1404004-300.02: RNCC: 3 | RNVC: 2

5 Mar 2009

5340-12-122-9139
Gurt

121229139
211841387: RNCC: 3 | RNVC: 2
241841387: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-183-0539
Nonmetallic Bumper

121830539
0016563: RNCC: 3 | RNVC: 2
16563-45644: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-360-0046
Nonmetallic Bumper

123600046
9414751720: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-131-5608

5340-12-305-5519
Angle Bracket

123055519
54.0042.706.00: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-346-4265
Nonmetallic Bumper

123464265
01307277: RNCC: 3 | RNVC: 2
1307277: RNCC: 5 | RNVC: 2
1307277: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-304-4312
Dust And Moisture Seal Protective Cap

123044312
4/0953/7011/1: RNCC: 2 | RNVC: 2
4/0953/7011/1: RNCC: 3 | RNVC: 2

17 Jul 1985

5340-12-309-1051
Access Cover

123091051
54.0028.599.00: RNCC: 3 | RNVC: 2

15 Dec 1986

5340-12-164-3992
Expansion Plug

121643992
3813010188: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-1844
Mounting Bracket

123581844
1404700281: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-355-5380
Access Cover

123555380
4221 359 008: RNCC: 3 | RNVC: 2
15009741: RNCC: 5 | RNVC: 2
4221359008: RNCC: 5 | RNVC: 9

22 Nov 2001

5340-12-356-2354
Spring Tension Clip

123562354
1460114-1: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-177-8090
Handle Grip

121778090
2510388800: RNCC: 3 | RNVC: 2

21 Feb 1979

5340-12-312-1541
Swivel Caster

123121541
463754424000: RNCC: 3 | RNVC: 2

27 Nov 1987

5340-12-334-8779
Nut And Bolt Locking Plate

123348779
5559940030: RNCC: 3 | RNVC: 2
5559940030: RNCC: 5 | RNVC: 2
5559940030: RNCC: 5 | RNVC: 2
555 994 00 30: RNCC: 5 | RNVC: 2

30 Jun 1994

5340-12-132-8921

5340-12-129-4253

5340-12-317-0694
Mounting Bracket

123170694
4615451240: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-324-3174
Mounting Bracket

123243174
54.2544.302.16: RNCC: 2 | RNVC: 2
54.2544.302.16: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-12-338-3425
Mounting Plate

123383425
1854201: RNCC: 3 | RNVC: 2
EZ18542: RNCC: 5 | RNVC: 2

26 Jun 1995

5340-12-385-4114
Helical Compression Spring Seat

123854114
5550610118: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-378-1435
Angle Bracket

123781435
2300232-826800.001.0: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-12-377-5506
Mounting Plate

123775506
8605059.3.080.01: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-12-171-6677
Webbing Strap

121716677
81669506002: RNCC: 3 | RNVC: 2
846.81669506002: RNCC: 3 | RNVC: 2

3 Nov 1977

5340-12-375-3219
Dust And Moisture Seal Protective Cap-Plug

123753219
260Q2222: RNCC: 3 | RNVC: 2
GPN260Q2222: RNCC: 5 | RNVC: 2

20 May 2008

5340-12-365-0627
Retaining Strap

123650627
6122010040: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-301-5166
Access Cover

123015166
1000163-371030.003.0: RNCC: 2 | RNVC: 2
1000163-371030.003.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-355-9572
Metallic Solid Wheel

123559572
9126.030.4: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-304-7861
Mending Plate

123047861
0224 4382: RNCC: 3 | RNVC: 2
02244382EE0148-29: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-090-1315

5340-12-318-6475
Mounting Bracket

123186475
M531029: RNCC: 3 | RNVC: 9
M531029: RNCC: 5 | RNVC: 2

3 Aug 1989

5340-12-183-3254
Nonmetallic Bumper

121833254
2760201: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-370-5173
Mounting Bracket

123705173
7803201105AA: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-12-366-0515
Spring Tension Clip

123660515
0009945848: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-162-9587
Retaining Strap

121629587
5909954168: RNCC: 3 | RNVC: 2
5909954168: RNCC: 5 | RNVC: 2
5909954168: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-2146
Resilient Mount

123012146
HFS 2-70: RNCC: 3 | RNVC: 2
3280 0600: RNCC: 5 | RNVC: 9
HFS 2-70: RNCC: 5 | RNVC: 9
HFS2-70: RNCC: 5 | RNVC: 9

28 Sep 1984

5340-12-301-3811
Angle Bracket

123013811
P-855357-401: RNCC: 3 | RNVC: 2
P855357-401: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-316-9648
Resilient Mount

123169648
2-49-01-0006-01: RNCC: 3 | RNVC: 9
3141550450: RNCC: 5 | RNVC: 2

28 Feb 1989

5340-12-173-8541
Retaining Strap

121738541
P-296652-005: RNCC: 3 | RNVC: 2
P296652-005: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-193-5400
Lock-Release Lever

121935400
P-895176-002: RNCC: 3 | RNVC: 2
P895176-002: RNCC: 5 | RNVC: 2

2 Aug 1982

5340-12-365-0491
Mechanic Equipment Hardware Kit

123650491
A70-0004-002: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-338-1336
Access Cover

123381336
160-75857: RNCC: 3 | RNVC: 2
15160-75857: RNCC: 5 | RNVC: 2
160-75857: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-305-6903
Metal Runner

123056903
4900123-4100.03: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-12-171-2680
Webbing Strap

121712680
23111-4121.00: RNCC: 2 | RNVC: 2
983168-257: RNCC: 3 | RNVC: 2
983222-257: RNCC: 3 | RNVC: 2
23111-4121.00: RNCC: 3 | RNVC: 9
1400045-3300: RNCC: 3 | RNVC: 9
23111-4121.00: RNCC: 5 | RNVC: 2
23111-4121-00: RNCC: 5 | RNVC: 9
23111-4121.00: RNCC: 5 | RNVC: 9
23111-4121-00: RNCC: 5 | RNVC: 9
000-B2-25X2,5X150-BW-RAL6031: RNCC: 6 | RNVC: 9

21 Sep 1977

5340-12-366-4252
Mounting Bracket

123664252
2 0068-098: RNCC: 3 | RNVC: 2
2 0068-098: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-12-702-5140
Rod End Clevis

127025140
VG95211-ML-127025140: RNCC: 2 | RNVC: 2
5.51.6501.1402.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-381-1710
Angle Bracket

123811710
1030056-400140.004.0: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-12-199-1315
Spring Tension Clip

121991315
1085.20.00130.4: RNCC: 3 | RNVC: 2
0477389: RNCC: 5 | RNVC: 2
7239525: RNCC: 5 | RNVC: 9

28 Mar 1984

5340-12-345-6551
Double Angle Bracket

123456551
1216 1545: RNCC: 3 | RNVC: 2
6.232.0.650.047.4: RNCC: 5 | RNVC: 9

8 Apr 1998

5340-12-183-5573
Mounting Bracket

121835573
CF 418 435 B: RNCC: 3 | RNVC: 2
CF 418 435 B: RNCC: 5 | RNVC: 2
CF 418 435 B: RNCC: 5 | RNVC: 2
CF418435B: RNCC: 5 | RNVC: 9
CF418435B: RNCC: 5 | RNVC: 9
CF418435B: RNCC: 5 | RNVC: 9

29 Apr 1980

5340-12-388-4394
Mounting Bracket

123884394
1030124-971056.000.0: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-315-6635
Mounting Bracket

123156635
512214-2203.000: RNCC: 3 | RNVC: 2
512214-2203: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-181-1848
Manual Control Handle

121811848
RH13245-42: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-318-3848
Metal Runner

123183848
C42165-A119-B8: RNCC: 3 | RNVC: 2
C42165-A119-B8: RNCC: 5 | RNVC: 2
5800587-314: RNCC: 5 | RNVC: 9

10 Jul 1989

5340-12-330-6033
Plain Solid Disk

123306033
11.02798-0001: RNCC: 3 | RNVC: 2
11.02798-0001: RNCC: 5 | RNVC: 2
11.02798-0001: RNCC: 5 | RNVC: 2

14 Jan 1993

5340-12-322-8014
Mending Plate

123228014
5803462-310-00: RNCC: 2 | RNVC: 2
FE97-310-00: RNCC: 3 | RNVC: 2

24 Sep 1990

5340-12-352-6131
Strap Hinge

123526131
8301-0011: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-190-1371
Rigid Caster

121901371
21-5180-061: RNCC: 3 | RNVC: 2

9 Nov 1981

5340-12-358-0253
Expansion Shield

123580253
1H6827584A: RNCC: 3 | RNVC: 2
1H6 827 584A: RNCC: 5 | RNVC: 9

3 Sep 2002

5340-12-312-6656
Turnbuckle

123126656
BSAH004: RNCC: 3 | RNVC: 2

25 Jan 1988

5340-12-317-4369
Flush Catch Claw

123174369
80100065: RNCC: 3 | RNVC: 2

7 Apr 1989

5340-12-187-9956
Angle Bracket

121879956
03457800: RNCC: 3 | RNVC: 2
03457800.464: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-354-4318
Access Cover

123544318
F03627: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-12-182-1322
Mounting Bracket

121821322
4063350346: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-322-3779
Headless Straight Rod

123223779
1774731: RNCC: 3 | RNVC: 2
1774731: RNCC: 5 | RNVC: 2

16 Aug 1990

5340-12-159-6743
Retaining Strap

121596743
ZBS59120: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-179-7603
Angle Bracket

121797603
81429062023: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-376-3588
Dust And Moisture Seal Protective Plug

123763588
10088885: RNCC: 3 | RNVC: 2
D5186046: RNCC: 5 | RNVC: 2

17 Sep 2008

5340-12-359-7990
Mounting Plate

123597990
214448: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-124-4269

5340-12-092-0925

5340-12-347-0248
Track Stop

123470248
CF 344 249 A: RNCC: 2 | RNVC: 2
CF 344 249 A: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-12-386-5377
Mounting Plate

123865377
1.314-201450.02: RNCC: 2 | RNVC: 2
1.314-201450.02: RNCC: 5 | RNVC: 2

8 Sep 2011

5340-12-312-9051
Mounting Bracket

123129051
5801984-980310.000.0: RNCC: 2 | RNVC: 2
5801984-980310.000.0: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-369-1789
Retaining Strap

123691789
1/1D9-38MMN325: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-179-8383
Angle Bracket

121798383
CF 418 655 A: RNCC: 3 | RNVC: 2
CF 418 655 A: RNCC: 5 | RNVC: 2
CF418655A: RNCC: 5 | RNVC: 2
CF418655A: RNCC: 5 | RNVC: 2
CF 418 655 A: RNCC: 5 | RNVC: 2
CF418655A: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-184-7238
Mending Plate

121847238
CF429268A: RNCC: 3 | RNVC: 2
CF 429 268 A: RNCC: 5 | RNVC: 2
CF429268A: RNCC: 5 | RNVC: 2
CF 429 268 A: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-343-3134
Dust And Moisture Seal Protective Plug

123433134
1HO121321A: RNCC: 3 | RNVC: 2
1H0 121 321 A: RNCC: 5 | RNVC: 2
357 121 321 C: RNCC: 5 | RNVC: 2
357121321C: RNCC: 5 | RNVC: 2

4 Jun 1997

5340-12-156-3501
Nut And Bolt Locking Plate

121563501
1-112-190: RNCC: 3 | RNVC: 2
1-112-190: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-373-7014
Spring Loaded Cylinder Fastener

123737014
S1214: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-12-343-5662
Angle Bracket

123435662
56031300020: RNCC: 3 | RNVC: 2
F300 0T 022 5277: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-343-8073
Strap Hinge

123438073
100026091: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-12-359-1806
Mounting Bracket

123591806
9455460982: RNCC: 3 | RNVC: 2
A9455460982: RNCC: 5 | RNVC: 9

8 Jan 2003

5340-12-306-0904
Angle Bracket

123060904
5801662-712000.11: RNCC: 2 | RNVC: 2
5801662-712000.11: RNCC: 3 | RNVC: 2
5801662-712000.11: RNCC: 5 | RNVC: 9

27 Jan 1986

5340-12-360-7085
Butt Hinge Leaf

123607085
000611-252110.03: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-329-8039
Angle Bracket

123298039
03693610: RNCC: 3 | RNVC: 2

1 Oct 1992

5340-12-314-5452
Mounting Bracket

123145452
6164320140: RNCC: 3 | RNVC: 2
616 432 01 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-357-8638
Angle Bracket

123578638
2300042-255268.000: RNCC: 2 | RNVC: 2
2300042-255268.000: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-12-308-3871
Coat And Hat Hook

123083871
6210009: RNCC: 3 | RNVC: 2
774944449: RNCC: 5 | RNVC: 9

3 Oct 1986

5340-12-193-5767
Rigid Caster

121935767
2300174-970630: RNCC: 2 | RNVC: 2
2300174-970630: RNCC: 3 | RNVC: 2
2300174-970630: RNCC: 5 | RNVC: 9

4 Aug 1982

5340-12-344-4875
Angle Bracket

123444875
78027 61071: RNCC: 2 | RNVC: 2
7802761071: RNCC: 3 | RNVC: 2
78027 61071: RNCC: 5 | RNVC: 9

3 Nov 1997

5340-12-043-3685

5340-12-043-3283

5340-12-324-8012
Mounting Plate

123248012
54.2544.231.08: RNCC: 3 | RNVC: 2

25 Mar 1991

5340-12-167-5862
Door Button

121675862
395939103: RNCC: 3 | RNVC: 9
395939103: RNCC: 5 | RNVC: 9

3 Jan 1977

5340-12-310-7268
Mending Plate

123107268
4900278-603100.03: RNCC: 2 | RNVC: 2
4900278-603100.03: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-12-358-1060
Mounting Plate

123581060
8.22.68: RNCC: 3 | RNVC: 2
8-22-68: RNCC: 5 | RNVC: 2

13 Sep 2002

5340-12-180-0434
Resilient Mount

121800434
2-01-012211-09: RNCC: 3 | RNVC: 9
3521550050: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-175-1002
Dust And Moisture Seal Protective Plug

121751002
02-1475-1: RNCC: 3 | RNVC: 2
0009974686: RNCC: 5 | RNVC: 2

23 Aug 1978

5340-12-310-4421
Hasp Staple

123104421
4-162922: RNCC: 3 | RNVC: 2
70219: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-306-3989
Mending Plate

123063989
V22.917.17-1: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-188-4656
Retaining Clip

121884656
023-150000-23-0: RNCC: 3 | RNVC: 2

13 Jul 1981

5340-12-357-8039
Multiple Angle Bracket

123578039
421951: RNCC: 3 | RNVC: 2
0006110530: RNCC: 5 | RNVC: 2

25 Jul 2002

5340-12-185-4112
Angle Bracket

121854112
CF311675: RNCC: 3 | RNVC: 2
CF 311 675: RNCC: 5 | RNVC: 2
CF311675: RNCC: 5 | RNVC: 2
CF 311 675: RNCC: 5 | RNVC: 2
CF311675: RNCC: 5 | RNVC: 2
CF 311 675: RNCC: 5 | RNVC: 2
CF311675: RNCC: 5 | RNVC: 2
CF 311 675: RNCC: 5 | RNVC: 2

3 Oct 1980

5340-12-172-8497
Door Handle

121728497
580A927: RNCC: 3 | RNVC: 2
4377074: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-363-5801
Angle Bracket

123635801
0224 8806: RNCC: 3 | RNVC: 2
571292877: RNCC: 5 | RNVC: 2

6 Jul 2004

5340-12-358-8055
Multiple Angle Bracket

123588055
64311051: RNCC: 3 | RNVC: 2
311.1410.13-4B: RNCC: 5 | RNVC: 9

18 Nov 2002

5340-12-313-8020
Door Button

123138020
7251701: RNCC: 3 | RNVC: 2

6 May 1988

5340-12-179-8473
Dust And Moisture Seal Protective Cap

121798473
109467: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-307-1567
Double Angle Bracket

123071567
4165440438: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-350-0663
Mounting Bracket

123500663
T304M2007101: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-12-369-6610
Dust And Moisture Seal Protective Cover

123696610
64051: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-356-1644
Mounting Bracket

123561644
6020700340: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-12-347-2947
Lock-Release Lever

123472947
1216 1508: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-12-197-0544
Cremone Bolt

121970544
4357407035: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-378-3214
Mounting Bracket

123783214
41004076: RNCC: 3 | RNVC: 2

27 Mar 2009

5340-12-389-0667
Expansion Shield

123890667
059910: RNCC: 3 | RNVC: 2
07400439: RNCC: 5 | RNVC: 2
059910: RNCC: 5 | RNVC: 2
2500602402: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-352-1143
Zug Ersatzteilsatz

123521143
20817-363: RNCC: 3 | RNVC: 2

17 Oct 2000

5340-12-353-4261
Spacing Threaded Standoff

123534261
52.9352.101.42: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-300-7257
Compression Cup

123007257
8692040020: RNCC: 3 | RNVC: 2
8692040020: RNCC: 5 | RNVC: 2
8692040020: RNCC: 5 | RNVC: 2

25 Aug 1984

5340-12-360-7072
Dust And Moisture Seal Protective Cap

123607072
2153309600006: RNCC: 3 | RNVC: 2
543333027406: RNCC: 5 | RNVC: 2

1 Jul 2003

5340-12-364-2488
Clamping Catch

123642488
4257520450: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-305-5673
Angle Bracket

123055673
4064265440: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-348-9218
Door Button

123489218
492.01.158: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-301-6083
Angle Bracket

123016083
2300107-370000.06: RNCC: 2 | RNVC: 2
2300107-370000.06: RNCC: 3 | RNVC: 2
2300107-370000.06: RNCC: 5 | RNVC: 9
2300107-370000.06: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-091-3345

5340-12-351-0219
Manual Control Lever

123510219
142701: RNCC: 3 | RNVC: 2

15 Jun 2000

5340-12-368-9525
Mounting Bracket

123689525
3896060: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-317-1433
Access Door

123171433
400176275: RNCC: 2 | RNVC: 2
400176275: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-12-387-5860
Mounting Bracket

123875860
X00041171: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-12-360-7733
Angle Bracket

123607733
0224 0285: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-174-4675
Loop Clamp

121744675
DIN3016-G1-105X25-W1-2: RNCC: 2 | RNVC: 2
SP105/25SK: RNCC: 3 | RNVC: 2
DIN3016-G1-105X25-W1-2: RNCC: 3 | RNVC: 2
1610000105: RNCC: 5 | RNVC: 2
SP105-25SK: RNCC: 5 | RNVC: 2
SP105-25SKZ: RNCC: 5 | RNVC: 2
VG95931-G105X25-W1: RNCC: 5 | RNVC: 9
VG95931G105X25W1: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-159-3755
Retaining Strap

121593755
030885: RNCC: 3 | RNVC: 2
780-1-94-01-00-0-0-53: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-165-6827
Retaining Strap

121656827
2225220: RNCC: 3 | RNVC: 2
2225-22-0: RNCC: 5 | RNVC: 2

15 Jun 1976

5340-12-355-7440
Mounting Bracket

123557440
P-876355-001: RNCC: 3 | RNVC: 2
P876355-001: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-305-2089
Pipe Bracket

123052089
P-350220-403: RNCC: 3 | RNVC: 2
P350220-403: RNCC: 5 | RNVC: 2

8 Oct 1985

5340-12-143-0095
Loop Clamp

121430095
DIN3016-1-B2-10-10X15-W1-2: RNCC: 2 | RNVC: 2
RS0.2X10/15: RNCC: 3 | RNVC: 2
DIN3016-B2-10-10X15-W1-2: RNCC: 3 | RNVC: 2
RS2X10-15: RNCC: 5 | RNVC: 2
4207215010: RNCC: 5 | RNVC: 2
RS2X10/15: RNCC: 5 | RNVC: 2
RS2X10-15: RNCC: 5 | RNVC: 2
DIN3016-B2-10-10X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-7849
Butt Hinge Leaf

121887849
2500075-191030.001.0: RNCC: 2 | RNVC: 2
2500075-191030.001.0: RNCC: 3 | RNVC: 2
2500075-191030-001-0: RNCC: 5 | RNVC: 9
2500075-191030.001.0: RNCC: 5 | RNVC: 9
2500075-191030-001-0: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-332-4127
Support Hook

123324127
5-470-620: RNCC: 3 | RNVC: 2
5-470620: RNCC: 5 | RNVC: 9
470 620: RNCC: 5 | RNVC: 9
5-470 620: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-168-5331
Angle Bracket

121685331
C20136A14C265: RNCC: 3 | RNVC: 2
C20136-A14-C265: RNCC: 5 | RNVC: 2
TDRUCK4T1265: RNCC: 5 | RNVC: 2
TFS72-54265: RNCC: 5 | RNVC: 2

18 Mar 1977

5340-12-377-5487
Access Cover

123775487
4100037-031220.000: RNCC: 2 | RNVC: 2
4100037-031220.000: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-12-178-9007
Mounting Bracket

121789007
5801215-0-097: RNCC: 3 | RNVC: 2
5801215-0.097: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-353-1826
Mounting Bracket

123531826
2500238-042900.000.0: RNCC: 2 | RNVC: 2
2500238-042900.000.0: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-310-5389
Loop Clamp

123105389
DIN3016-1-D2-28-28X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.2X28/20: RNCC: 3 | RNVC: 2
DIN3016-D2-28-28X20-W1-2: RNCC: 3 | RNVC: 2
4219220028: RNCC: 5 | RNVC: 2
0512457: RNCC: 5 | RNVC: 2
04219220028: RNCC: 5 | RNVC: 2
512457: RNCC: 5 | RNVC: 9
DIN3016-D2-28-28X20-W1-2: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-338-7645
Bow Handle

123387645
540013-3001.00: RNCC: 3 | RNVC: 2

23 Aug 1995

5340-12-198-8416
Double Angle Bracket

121988416
5802017-000000.06: RNCC: 2 | RNVC: 2
5802017-000000.06: RNCC: 3 | RNVC: 2
5802017-000000.06: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-327-8476
Mending Plate

123278476
2653-186240.03: RNCC: 2 | RNVC: 2
2653-186240.03: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-12-157-4456
Angle Bracket

121574456
51-2401-450-10: RNCC: 3 | RNVC: 2
51-2401-450-10LV: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-359-1240
Expansion Plug

123591240
000443010001: RNCC: 3 | RNVC: 2
N000443010001: RNCC: 5 | RNVC: 9

18 Dec 2002

5340-12-359-1516
Mounting Bracket

123591516
ZG5200G430: RNCC: 3 | RNVC: 2
ZG5200G430: RNCC: 5 | RNVC: 9
ZG5200G430ST: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-199-5057
Rigid Caster

121995057
8372300540: RNCC: 3 | RNVC: 2

4 May 1984

5340-12-358-9230
Multiple Angle Bracket

123589230
3854280340: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-385-4046
Access Cover

123854046
5550610103: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-391-3496
Hand Crank

123913496
230555: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-090-6972

5340-12-094-4302

5340-12-197-0537
Strap Hinge

121970537
5482.993.9: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-180-4058
Mounting Plate

121804058
CF 404 965 B: RNCC: 2 | RNVC: 2
CF 404 965 B: RNCC: 3 | RNVC: 2
CF 404 965 B: RNCC: 5 | RNVC: 2
CF 404 965 B: RNCC: 5 | RNVC: 2
CF 404 965 A: RNCC: 5 | RNVC: 9
CF404965A: RNCC: 5 | RNVC: 9
CF404965A: RNCC: 5 | RNVC: 9
CF 404 965 A: RNCC: 5 | RNVC: 9
CF404965A: RNCC: 5 | RNVC: 9
CF 404 965 A: RNCC: 5 | RNVC: 9

10 Sep 1979

5340-12-302-6793
Mending Plate

123026793
YK03320732: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 32 0732: RNCC: 5 | RNVC: 9
03320732: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-304-3309
Mortise Lock Set

123043309
1 34 015: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-318-3469
Angle Bracket

123183469
5311.997.4: RNCC: 3 | RNVC: 2

6 Jul 1989

5340-12-372-4970
Rim Lock

123724970
10013850: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-180-0568
Webbing Strap

121800568
3818900394: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-332-7401
Butt Hinge

123327401
234 615: RNCC: 3 | RNVC: 2
234.615: RNCC: 5 | RNVC: 2
234615: RNCC: 5 | RNVC: 2
234 615: RNCC: 5 | RNVC: 9

14 Sep 1993

5340-12-356-1645
Loop Clamp

123561645
6039951265: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-12-301-2390
Mending Plate

123012390
4179260: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-391-9863
Clamping Catch Fastener

123919863
9304751020: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-12-380-8300
Spacing Threaded Standoff

123808300
8372370471: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-380-3784
Mounting Bracket

123803784
4256510714: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-199-7756
Strap Fastener Loop

121997756
5801764-100000.000: RNCC: 2 | RNVC: 2
5801764-100000.000: RNCC: 3 | RNVC: 2

30 May 1984

5340-12-333-3939
Mending Plate

123333939
3900096-110000.03: RNCC: 2 | RNVC: 2
62 266: RNCC: 3 | RNVC: 2
3900096-110000.03: RNCC: 5 | RNVC: 2

10 Dec 1993

5340-12-322-4887
Door Button

123224887
8100397-300-09: RNCC: 2 | RNVC: 2
8100397-300-09: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-187-2951
Electrical-Mechanical Equipment Post

121872951
VG95148B6XM3X75-NRST: RNCC: 2 | RNVC: 2
CF 442 150: RNCC: 3 | RNVC: 2
VG95148B6XM3X75-NRST: RNCC: 3 | RNVC: 2
CF 442 150: RNCC: 3 | RNVC: 2
CF442150: RNCC: 5 | RNVC: 2
CF442150: RNCC: 5 | RNVC: 9

26 Mar 1981

5340-12-365-3044
Mounting Bracket

123653044
320314-01: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-12-356-3330
Access Cover

123563330
B10.13600-0002POS004: RNCC: 3 | RNVC: 2
E10.13688-0001: RNCC: 5 | RNVC: 9

14 Feb 2002

5340-12-157-3097
Pipe Bracket

121573097
NO PRIMARY REF 12-157-3097: RNCC: 3 | RNVC: 2
022131: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-0771
Double Angle Bracket

121960771
C22117-A163-C24: RNCC: 3 | RNVC: 2

25 May 1983

5340-12-321-3048
Spring Loaded Cylinder Fastener

123213048
2500067-101331.00: RNCC: 2 | RNVC: 2
2500067-101331.00: RNCC: 3 | RNVC: 2

2 May 1990

5340-12-199-0798
Mending Plate

121990798
3818910096: RNCC: 3 | RNVC: 2

23 Mar 1984

5340-12-356-5140
Loop Clamp

123565140
06.67840-104: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-332-7439
Access Cover

123327439
4312 712 64700: RNCC: 2 | RNVC: 2
4312 712 64700: RNCC: 3 | RNVC: 2
431271264700: RNCC: 5 | RNVC: 2
4312 712 6470: RNCC: 5 | RNVC: 9
4312 712 6470: RNCC: 5 | RNVC: 9
43127126470: RNCC: 5 | RNVC: 9

14 Sep 1993

5340-12-186-5313
Helical Compression Spring Seat

121865313
R900156179: RNCC: 3 | RNVC: 2
156179: RNCC: 5 | RNVC: 9

14 Jan 1981

5340-12-384-8785
Mechanic Equipment Hardware Kit

123848785
61.000.016: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-365-0216
Mounting Bracket

123650216
5160-545200A01B: RNCC: 2 | RNVC: 2
5160-545200A01B: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-353-7705
Strap Hinge

123537705
CBD45017P06: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-350-9155
Mounting Plate

123509155
105-912517: RNCC: 3 | RNVC: 2

5 Jun 2000

5340-12-391-6012
Mounting Bracket

123916012
S252M3179207: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-182-7015

5340-12-122-6236
Loop Clamp

121226236
4049951401: RNCC: 3 | RNVC: 2
402010101800: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-010-4909

5340-12-161-1235

5340-12-360-0059
Mounting Bracket

123600059
9415402273: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-314-3887
Angle Bracket

123143887
024014101: RNCC: 3 | RNVC: 2

1 Jul 1988

5340-12-325-3950
Access Cover

123253950
2300061-053150.000: RNCC: 2 | RNVC: 2
2300061-053150.000: RNCC: 3 | RNVC: 2
2300061-053150: RNCC: 5 | RNVC: 9
2300061-053150.000: RNCC: 5 | RNVC: 9

3 Jun 1991

5340-12-135-6836

5340-12-352-0548
Spacing Threaded Standoff

123520548
5400049-766300.03: RNCC: 2 | RNVC: 2
5400049-766300.03: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-360-4793
Mounting Plate

123604793
82050302: RNCC: 3 | RNVC: 2
82050302: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-372-2342
Pawl Fastener Set

123722342
4536872-802: RNCC: 3 | RNVC: 2
4536872-802: RNCC: 5 | RNVC: 2

29 Jun 2007

5340-12-360-4780
Mounting Bracket

123604780
82070109: RNCC: 3 | RNVC: 2
82070109: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-376-2229
Butt Hinge

123762229
10065000: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-12-181-2384
Mounting Bracket

121812384
3520180140: RNCC: 3 | RNVC: 2

5 Nov 1979

5340-12-090-7189

5340-12-199-5425
Handle Grip

121995425
5.394-049.0: RNCC: 3 | RNVC: 2
5-394-049: RNCC: 5 | RNVC: 9
5.394-049: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-317-2373
Mounting Plate

123172373
5-440-440: RNCC: 3 | RNVC: 2
440 440: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-308-6550
Nonmetallic Solid Wheel

123086550
20-7230-137: RNCC: 3 | RNVC: 2

3 Nov 1986

5340-12-324-6501
Lock-Release Lever

123246501
100017016: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-347-6921
Spring Holder

123476921
1682-380222.004.0: RNCC: 2 | RNVC: 2
1682-380222.004.0: RNCC: 3 | RNVC: 2

27 Jan 1999

5340-12-320-4531
Clamping Catch

123204531
351-B: RNCC: 3 | RNVC: 2

16 Jan 1990

5340-12-375-9885
Mounting Bracket

123759885
0.0.026.07: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-12-168-2803
Loop Clamp

121682803
LN9491B3: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-320-7129
Catch Strike

123207129
9000 4163: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-140-5870

5340-12-181-7851
Mounting Bracket

121817851
5800583-097113.001: RNCC: 2 | RNVC: 2
C42280A256C18: RNCC: 3 | RNVC: 2
5800583-097113.001: RNCC: 5 | RNVC: 2
5800583-097113-001: RNCC: 5 | RNVC: 2
C42280-A256-C18: RNCC: 5 | RNVC: 2

17 Dec 1979

5340-12-350-7026
Door Holder

123507026
10063-810010: RNCC: 3 | RNVC: 2
10063-810010: RNCC: 5 | RNVC: 9

8 May 2000

5340-12-326-3411
Nonmetallic Bumper

123263411
5400028-1000-06: RNCC: 2 | RNVC: 2

3 Sep 1991

5340-12-379-9488
Mounting Bracket

123799488
1558327: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-313-4609
Mending Plate

123134609
2300074-5636.01: RNCC: 2 | RNVC: 2
2300074-5636.01: RNCC: 3 | RNVC: 2
2300074-5636.01: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-360-4117
Mounting Bracket

123604117
3513631417: RNCC: 3 | RNVC: 2
3513631417: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-312-4814
Nonmetallic Bumper

123124814
2300217-185520.000.0: RNCC: 2 | RNVC: 2
DIN95364-D18X8,5-NR60ST-M8X30: RNCC: 2 | RNVC: 2
81135-18X8,5-M8X30.NR60.ST: RNCC: 5 | RNVC: 2
811.035.018.008,5.08X30.NR60.ST: RNCC: 5 | RNVC: 2
2300217-185520.000.0: RNCC: 5 | RNVC: 2
VG95364-D18X8,5-M8X30-NR60ST: RNCC: 5 | RNVC: 9
VG95364-D18X8,5-NR60ST-M8X30: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-187-1726
Nonmetallic Bumper

121871726
5-612-0379: RNCC: 3 | RNVC: 2
5-612-0379-3: RNCC: 5 | RNVC: 2

9 Mar 1981

5340-12-188-8696
Double Angle Bracket

121888696
5801433-020650.00.0: RNCC: 3 | RNVC: 2
5801433-020650-00-0: RNCC: 5 | RNVC: 2
5801433-020650-00-0: RNCC: 5 | RNVC: 9
5801433-020650.00.0: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-12-701-6171
Mounting Bracket

127016171
VG95211-ML-127016171: RNCC: 2 | RNVC: 2
5.12.7010.1660.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-3265
Access Cover

123863265
2500261-183720.000.0: RNCC: 2 | RNVC: 2
2500261-183720.000.0: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-180-1504
Retaining Strap

121801504
8HS400108-00: RNCC: 3 | RNVC: 2
400108-00: RNCC: 5 | RNVC: 2

22 Aug 1979

5340-12-377-7149
Webbing Strap

123777149
4100036-150296.000: RNCC: 2 | RNVC: 2
4100036-150296.000: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-12-366-7915
Mechanical Stop

123667915
2300421-181185.000: RNCC: 2 | RNVC: 2
2300421-181185.000: RNCC: 3 | RNVC: 2

8 Jun 2005

Load More Results