What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 69 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 69 of 178

5340-12-371-1980
Arched Cushion

123711980
10202: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-12-363-5088
Loop Clamp

123635088
7425133: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-050-6287

5340-12-351-0679
Extension Handle

123510679
2250/92.02: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-12-322-3346
Angle Bracket

123223346
4608890412: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-354-4423
Helical Compression Spring Seat

123544423
4NT2180760: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-302-8157
Metal Runner

123028157
C1003.02.06.03.03: RNCC: 3 | RNVC: 2
C1003.02.06.03.03: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-357-2044
Mounting Bracket

123572044
0002680573: RNCC: 3 | RNVC: 2

21 May 2002

5340-12-394-0382
Access Cover

123940382
70-12-016-02-01: RNCC: 3 | RNVC: 2
H03879: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-12-389-8373
Spacing Threaded Standoff

123898373
104710-100006: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-12-353-1668
Metallic Bumper

123531668
9997023-206200.009.0: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-12-387-7135
Loop Clamp

123877135
DIN3016-1-D1-22X15-W5-NBR: RNCC: 2 | RNVC: 2

26 Jan 2012

5340-12-361-0835
Double Angle Bracket

123610835
J27620008-403: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-350-4326
Mounting Plate

123504326
160-88453-13: RNCC: 3 | RNVC: 2
160-88453-13: RNCC: 5 | RNVC: 2

30 Mar 2000

5340-12-385-2087
Dust And Moisture Seal Protective Cap

123852087
460190763: RNCC: 3 | RNVC: 2

10 May 2011

5340-12-314-2474
Electrical-Mechanical Equipment Post

123142474
4030720624: RNCC: 3 | RNVC: 2
403 072 06 24: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-180-3410
Angle Bracket

121803410
3818850216: RNCC: 3 | RNVC: 2

5 Sep 1979

5340-12-164-1502
Strap Bolt

121641502
3362A90: RNCC: 3 | RNVC: 2
GSV3362A90: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-2752
Loop Clamp

123072752
266 026: RNCC: 3 | RNVC: 2

28 May 1986

5340-12-347-0249
Access Cover

123470249
CF 024 224 C: RNCC: 2 | RNVC: 2
CF 024 224 C: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-12-323-1842
Ball Socket Seat

123231842
10 03 000 006: RNCC: 3 | RNVC: 2
42491352: RNCC: 5 | RNVC: 2
6 SXN 03 R: RNCC: 5 | RNVC: 2
1592290: RNCC: 5 | RNVC: 2

30 Oct 1990

5340-12-303-4311
Retaining Strap

123034311
KMP ES 120-2: RNCC: 3 | RNVC: 2

22 Mar 1985

5340-12-379-9715
Buckle

123799715
121W162140.000.0: RNCC: 2 | RNVC: 2
121W162140.000.0: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-12-356-3691
Mounting Plate

123563691
6001.5.7.00: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-306-1548
Webbing Strap

123061548
8036M0101: RNCC: 3 | RNVC: 2

31 Jan 1986

5340-12-198-3275
Rod End Connector

121983275
27 0319 159: RNCC: 2 | RNVC: 2
9849631: RNCC: 3 | RNVC: 2
27 0319 159: RNCC: 5 | RNVC: 9
9849631: RNCC: 5 | RNVC: 9
270319159: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-318-9032
Dust And Moisture Seal Protective Cap

123189032
434158: RNCC: 3 | RNVC: 2
434158: RNCC: 5 | RNVC: 2
434158: RNCC: 5 | RNVC: 9

24 Aug 1989

5340-12-316-9650
Detent Plunger

123169650
3212620774: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-165-8602
Loop Clamp

121658602
PAN4263-12: RNCC: 3 | RNVC: 2

3 Jul 1976

5340-12-375-9624
Hose-Cable Hanger

123759624
239-20: RNCC: 3 | RNVC: 2
4078500023900: RNCC: 5 | RNVC: 2

24 Jul 2008

5340-12-174-3766
Butt Hinge Leaf

121743766
BD7001G158: RNCC: 3 | RNVC: 2
BD7001G158: RNCC: 3 | RNVC: 9
1292001-000158: RNCC: 5 | RNVC: 9

29 Jun 1978

5340-12-348-9285
Handle Grip

123489285
VG85531-110: RNCC: 2 | RNVC: 2

2 Sep 1999

5340-12-364-3895
Access Cover

123643895
205-070-608-5007: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-357-7102
Manual Control Handle

123577102
0019192960: RNCC: 3 | RNVC: 2
928462-04: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-178-1293
Electrical-Mechanical Equipment Post

121781293
VG95148B10XM5X50-AL: RNCC: 2 | RNVC: 2
VG95148B10XM5X50-AL: RNCC: 3 | RNVC: 2
0803-27: RNCC: 3 | RNVC: 2

22 Mar 1979

5340-12-346-9535
Mending Plate

123469535
280855260-5H40-1201: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-12-324-0334
Double Angle Bracket

123240334
C22107-A300-C96: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-12-192-3176
Retaining Strap

121923176
86017447: RNCC: 3 | RNVC: 2
86017447EE5038-42: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-163-9857
Retaining Strap

121639857
1392152-050011.049: RNCC: 2 | RNVC: 2
1392152-050011.049: RNCC: 3 | RNVC: 2
1392152-050011-049: RNCC: 5 | RNVC: 9
1392152-050011.049: RNCC: 5 | RNVC: 9
1392152-050011-049: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-158-8142
Pipe Bracket

121588142
2413565KZ0144-16: RNCC: 3 | RNVC: 2
0241 3565: RNCC: 5 | RNVC: 2
2413565: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-149-8506
Retaining Strap

121498506
59006309: RNCC: 3 | RNVC: 2
GL9120: RNCC: 5 | RNVC: 2
CDIN74294: RNCC: 5 | RNVC: 9
DIN74294-C: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-9669
Webbing Strap

123799669
121W160200.005.0: RNCC: 2 | RNVC: 2
121W160200.005.0: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-702-4768
Mounting Bracket

127024768
VG95211-ML-127024768: RNCC: 2 | RNVC: 2
5.51.0605.0301.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-189-0328
Resilient Mount

121890328
3 008 110 025: RNCC: 3 | RNVC: 2
N38-00004: RNCC: 5 | RNVC: 2

19 Aug 1981

5340-12-166-1677
Access Cover

121661677
2360-012000.75.0: RNCC: 2 | RNVC: 2
2360-012000-75-0: RNCC: 5 | RNVC: 2
120 4941: RNCC: 5 | RNVC: 2
2360-012000.75.0: RNCC: 5 | RNVC: 2
35E0120-75.000: RNCC: 5 | RNVC: 2
2360-012000-75-0: RNCC: 5 | RNVC: 9
2360-012000.75.0: RNCC: 5 | RNVC: 9

10 Aug 1976

5340-12-365-5804
Double Angle Bracket

123655804
J27420018-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-305-1330
Metal Runner

123051330
4900059-111126.003.0: RNCC: 3 | RNVC: 2
1228231: RNCC: 5 | RNVC: 2

1 Oct 1985

5340-12-313-5568
Mending Plate

123135568
C104-A24-C57: RNCC: 2 | RNVC: 2
C104-A24-C57: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-392-6463
Protection Bellows

123926463
00426386: RNCC: 3 | RNVC: 2
V6-00631-42CR764: RNCC: 5 | RNVC: 2
540252: RNCC: 5 | RNVC: 2
CV164036: RNCC: 5 | RNVC: 2

26 Jun 2013

5340-12-338-9446
Mounting Bracket

123389446
4900319-201100.00: RNCC: 2 | RNVC: 2
4900319-201100.00: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-12-179-1785
Mounting Bracket

121791785
5801113-111122: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-366-3878
Mounting Plate

123663878
AFG-02B-413C-9025-01: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-12-327-8999
Angle Bracket

123278999
C42080-A34-B5: RNCC: 2 | RNVC: 2
C42080-A34-B5: RNCC: 3 | RNVC: 2

18 Mar 1992

5340-12-393-7170
Mounting Bracket

123937170
11.44144-0077: RNCC: 3 | RNVC: 2
11.44144-0077: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-380-2365
Dust And Moisture Seal Protective Cap-Plug Set

123802365
S281M8084101: RNCC: 3 | RNVC: 2

8 Oct 2009

5340-12-368-9098
Elastic Strap

123689098
M1352 816110: RNCC: 3 | RNVC: 2

5 May 2006

5340-12-161-8217

5340-12-128-6743

5340-12-350-7180
Double Angle Bracket

123507180
2300387-660200.001: RNCC: 2 | RNVC: 2
9907408: RNCC: 3 | RNVC: 2
2300387-660200.001: RNCC: 5 | RNVC: 9
9907408: RNCC: 5 | RNVC: 9

10 May 2000

5340-12-183-9042
Retaining Strap

121839042
2215047: RNCC: 3 | RNVC: 9
4028: RNCC: 5 | RNVC: 2

29 May 1980

5340-12-004-4048

5340-12-004-3607

5340-12-172-7540
Mending Plate

121727540
23290-181553: RNCC: 2 | RNVC: 2
23290-181553: RNCC: 5 | RNVC: 2

20 Feb 1978

5340-12-331-3250
Double Angle Bracket

123313250
231G-03-T22: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-12-321-8753
Angle Bracket

123218753
90-SKS-226: RNCC: 2 | RNVC: 2
90-SKS-226: RNCC: 3 | RNVC: 2
90-SKS-226: RNCC: 5 | RNVC: 9

5 Jul 1990

5340-12-356-6218
Mending Plate

123566218
2125-125120.20B: RNCC: 2 | RNVC: 2
2125-125120.20B: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-172-9081
Detent Plunger

121729081
14021-15006-01: RNCC: 3 | RNVC: 2
893650: RNCC: 5 | RNVC: 2
14021-15006-01: RNCC: 5 | RNVC: 9

2 Mar 1978

5340-12-379-4382
Access Cover

123794382
2500298-191820.000.0: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-171-2959
Angle Bracket

121712959
81517100548: RNCC: 3 | RNVC: 2
23250-121603-001-0: RNCC: 5 | RNVC: 9
23250-121603.001.0: RNCC: 5 | RNVC: 9

29 Sep 1977

5340-12-701-6063
Mounting Bracket

127016063
VG95211-ML-127016063: RNCC: 2 | RNVC: 2
5.12.7002.1171.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-3806
Clamping Catch

123053806
B-228136: RNCC: 3 | RNVC: 2
B-228136: RNCC: 5 | RNVC: 2

29 Oct 1985

5340-12-309-7816
Access Cover

123097816
2300121-981130.001.0: RNCC: 2 | RNVC: 2
2300121-981130.001.0: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-339-8395
Access Cover

123398395
1.6427-3: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-12-358-6188
Mending Plate

123586188
2500262-390220.000.0: RNCC: 2 | RNVC: 2
2500262-390220.000.0: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-321-5271
Mending Plate

123215271
2782-360210.000.0: RNCC: 2 | RNVC: 2
2782-360210.000.0: RNCC: 3 | RNVC: 2

29 May 1990

5340-12-322-3576
Door Hook And Eye

123223576
100012741: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-027-0053

5340-12-337-7072
Cushioning Pad

123377072
55757S0101: RNCC: 3 | RNVC: 2

30 Mar 1995

5340-12-325-8056
Angle Bracket

123258056
3812951940: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-12-358-2963
Manual Control Handle

123582963
GN563-67-B6: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-12-188-8039
Mending Plate

121888039
5801479-3020.02: RNCC: 2 | RNVC: 2
5801479-3020.02: RNCC: 3 | RNVC: 2
5801479-3020-02: RNCC: 5 | RNVC: 2
5801479-3020-02: RNCC: 5 | RNVC: 9
5801479-3020.02: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-702-2102
Mounting Plate

127022102
VG95211-ML-127022102: RNCC: 2 | RNVC: 2
30.7216.1505: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-341-5871
Sealing Plug Assembly

123415871
MB 800-060: RNCC: 3 | RNVC: 2
0028420000: RNCC: 5 | RNVC: 2

26 Sep 1996

5340-12-143-7682
Spring Loaded Cylinder Fastener

121437682
AR5576F0RM2: RNCC: 2 | RNVC: 2
AR5576F0RM2: RNCC: 5 | RNVC: 9
0104I: RNCC: 5 | RNVC: 9
07E172: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-367-0439
Mounting Bracket

123670439
PIKVWI40/40: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-195-2838
Headless Straight Rod

121952838
SK4372-4: RNCC: 3 | RNVC: 2
19332120: RNCC: 5 | RNVC: 2

2 Feb 1983

5340-12-331-9017
Leather Strap

123319017
1322/31-RAL6031: RNCC: 3 | RNVC: 2
1322/31: RNCC: 5 | RNVC: 9

5 Jul 1993

5340-12-305-1114
Angle Bracket

123051114
4900059-211401.001.0: RNCC: 3 | RNVC: 2
1220143: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-310-6523
Mending Plate

123106523
P-243860-001: RNCC: 3 | RNVC: 2
P243860-001: RNCC: 5 | RNVC: 2

12 Jun 1987

5340-12-122-2973
Loop Clamp

121222973
2210028121: RNCC: 3 | RNVC: 2
0000941842: RNCC: 5 | RNVC: 2
RE99-5-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-346-2530
Access Cover

123462530
2500253-190150.000.0: RNCC: 2 | RNVC: 2
2500253-190150.000.0: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-12-361-6377
Angle Bracket

123616377
P-145335-017: RNCC: 3 | RNVC: 2
P145335-017: RNCC: 5 | RNVC: 2
P-145335-017: RNCC: 5 | RNVC: 2

28 Oct 2003

5340-12-319-5332
Mending Plate

123195332
5802006-202100.03: RNCC: 2 | RNVC: 2
5802006-202100.03: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-171-9198
Butt Hinge Leaf

121719198
81658046001: RNCC: 3 | RNVC: 2
23230-182811-000-0: RNCC: 5 | RNVC: 9
23230-182811.000.0: RNCC: 5 | RNVC: 9

29 Nov 1977

5340-12-326-3331
Electrical-Mechanical Equipment Post

123263331
011/040600-074: RNCC: 3 | RNVC: 2
011/040600-076: RNCC: 3 | RNVC: 2
011/040600-07: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-327-5456
Metallic Bumper

123275456
2106-120000.05B: RNCC: 2 | RNVC: 2
2106-120000.05B: RNCC: 3 | RNVC: 2

31 Jan 1992

5340-12-195-2000
Dust And Moisture Seal Protective Cap

121952000
025-0501-000: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-12-379-5929
Manual Control Handle

123795929
ED41-2688-00108-043: RNCC: 3 | RNVC: 2

12 Aug 2009

5340-12-332-8758
Mounting Bracket

123328758
512206-0236.000: RNCC: 3 | RNVC: 2

29 Sep 1993

5340-12-315-8460
Mending Plate

123158460
P-086336-017: RNCC: 3 | RNVC: 2
P086336-017: RNCC: 5 | RNVC: 2

1 Dec 1988

5340-12-333-2645
Mounting Bracket

123332645
LB-IV/2-40E01-38: RNCC: 2 | RNVC: 2

16 Nov 1993

5340-12-197-5859
Angle Bracket

121975859
A-230129-155: RNCC: 3 | RNVC: 2
A230129-155: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-365-1899
Dust And Moisture Seal Protective Plug

123651899
2300348-184340.005.0: RNCC: 3 | RNVC: 2
690/6001 RAL9010: RNCC: 5 | RNVC: 2

7 Dec 2004

5340-12-701-6987
Angle Bracket

127016987
VG95211-ML-127016987: RNCC: 2 | RNVC: 2
5.12.7227.8009.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-357-5426
Mounting Bracket

123575426
5582270: RNCC: 2 | RNVC: 2
5582270: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-301-2395
Retaining Strap

123012395
1009184: RNCC: 3 | RNVC: 2
4115471: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-169-7540
Spring Tension Clip

121697540
A11A336250003: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-702-2105
Angle Bracket

127022105
VG95211-ML-127022105: RNCC: 2 | RNVC: 2
30.7216.1570: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-343-5104
Double Angle Bracket

123435104
4617421116: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-12-332-8491
Pipe Hanger

123328491
304211: RNCC: 3 | RNVC: 2

27 Sep 1993

5340-12-375-8040
Retaining Clip

123758040
063880: RNCC: 3 | RNVC: 2

7 Jul 2008

5340-12-371-5419
Retaining Clip

123715419
T881M4033212: RNCC: 2 | RNVC: 2
T881M4033212: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-379-6295
Mechanical Stop

123796295
4149 306 127: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-334-2842
Mounting Bracket

123342842
P764371401504000: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-12-050-6235

5340-12-357-0161
Compression Cup

123570161
613682: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-360-9926
Mounting Bracket

123609926
15055202: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-044-3498

5340-12-168-2777
Loop Clamp

121682777
LN9491B35: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-177-0542
Expansion Plug

121770542
51903020012: RNCC: 3 | RNVC: 2
5000165523: RNCC: 5 | RNVC: 2
5000165523: RNCC: 5 | RNVC: 9

9 Jan 1979

5340-12-043-3116

5340-12-384-3536
Hand Crank

123843536
BHAA050: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-12-191-0552
Retaining Strap

121910552
6219950120: RNCC: 3 | RNVC: 2

11 Jan 1982

5340-12-392-3625
Access Cover

123923625
I006078TAN686A: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-191-8848
Dust And Moisture Seal Protective Cap

121918848
81960010133: RNCC: 3 | RNVC: 2
81.96001.0133: RNCC: 5 | RNVC: 2
02-1912: RNCC: 5 | RNVC: 2
12288: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-198-8377
Dust And Moisture Seal Protective Cap

121988377
275.778: RNCC: 3 | RNVC: 2
275-778: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-12-363-9073
Angle Bracket

123639073
J92226806-003: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-307-5128
Catch Strike

123075128
4616300548: RNCC: 3 | RNVC: 2
8522-77: RNCC: 5 | RNVC: 2

25 Jun 1986

5340-12-703-1835
Loop Clamp

127031835
VG95211-ML-127031835: RNCC: 2 | RNVC: 2
1729S-52-35-T: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-164-4428
Shock Mount Pad

121644428
25704-190830.01.0: RNCC: 2 | RNVC: 2
01700030900: RNCC: 3 | RNVC: 2
1010310: RNCC: 5 | RNVC: 2
25704-190830.01.0: RNCC: 5 | RNVC: 2
25704-190830-01-0: RNCC: 5 | RNVC: 2
25704-190830.01.0: RNCC: 5 | RNVC: 2
25704-190830-01-0: RNCC: 5 | RNVC: 9
25704-190830.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-4543
Mending Plate

123344543
702-241910-904-0: RNCC: 3 | RNVC: 2

10 May 1994

5340-12-335-4637
Mounting Bracket

123354637
073-450470-001-0: RNCC: 2 | RNVC: 2
073-450470-001-0: RNCC: 3 | RNVC: 2

19 Aug 1994

5340-12-314-5602
Resilient Mount

123145602
48689.NR55.ALMG3: RNCC: 3 | RNVC: 2
48689BSTN5590-ALMG3: RNCC: 3 | RNVC: 2
48689-55-ALMG3: RNCC: 5 | RNVC: 2

19 Jul 1988

5340-12-317-2482
Mounting Bracket

123172482
53572-001: RNCC: 3 | RNVC: 2
53 572-001: RNCC: 5 | RNVC: 9

21 Mar 1989

5340-12-343-8943
Spacing Threaded Standoff

123438943
0D846.91-10-23-00-005: RNCC: 3 | RNVC: 2

12 Aug 1997

5340-12-343-9816
Double Angle Bracket

123439816
536519-0606.000: RNCC: 2 | RNVC: 2
536519-0606.000: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-12-365-5808
Multiple Angle Bracket

123655808
J27420059-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-177-5264
Angle Bracket

121775264
009-039.502-009: RNCC: 3 | RNVC: 2
12791-520000-009: RNCC: 5 | RNVC: 2
009-039-502-009: RNCC: 5 | RNVC: 9
12791-520000-009: RNCC: 5 | RNVC: 9
12791-520000.009: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-349-7873
Mounting Bracket

123497873
105-61860.06: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-128-0425

5340-12-313-4451
Mending Plate

123134451
3A94204: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-12-352-7117
Butt Hinge Leaf

123527117
T531M5501205: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-159-9525
Rod End Clevis

121599525
1402 306 035: RNCC: 3 | RNVC: 2
102325201: RNCC: 5 | RNVC: 2
1402306035: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-0793
Mounting Plate

123870793
S256M1024214: RNCC: 3 | RNVC: 2

3 Nov 2011

5340-12-044-2724

5340-12-044-0634

5340-12-338-4084
Dust And Moisture Seal Protective Cap

123384084
372390: RNCC: 3 | RNVC: 2
553174177: RNCC: 5 | RNVC: 2

4 Jul 1995

5340-12-383-2735
Assembled Nut Retainer

123832735
F6371011: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-004-2757

5340-12-004-3728

5340-12-043-7100

5340-12-349-9936
Dust And Moisture Seal Protective Cap

123499936
10460: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-12-342-1189
Dust And Moisture Seal Protective Plug

123421189
46099707869051: RNCC: 3 | RNVC: 2
4609970786 9051: RNCC: 5 | RNVC: 2

13 Dec 1996

5340-12-358-0906
Rod End Clevis

123580906
1948063K24: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-199-6168
Dust And Moisture Seal Protective Cap

121996168
158719: RNCC: 2 | RNVC: 2
158719: RNCC: 3 | RNVC: 2

16 May 1984

5340-12-349-8044
Lock Key

123498044
51 25 9 062 811: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-353-6532
Dust And Moisture Seal Protective Plug

123536532
HS20-9-RT001: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-12-343-2027
Spacing Threaded Standoff

123432027
520-970100.03.0: RNCC: 2 | RNVC: 2
520-970100.03.0: RNCC: 3 | RNVC: 2

16 May 1997

5340-12-190-2579
Helical Compression Spring Seat

121902579
2420222008: RNCC: 3 | RNVC: 2
2 420 222 008: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-358-6984
Mounting Plate

123586984
2481-390109.000.0: RNCC: 2 | RNVC: 2
2481-390109.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-183-5879
Angle Bracket

121835879
CF400649A: RNCC: 3 | RNVC: 2
CF 400 649 A: RNCC: 5 | RNVC: 2
CF400649A: RNCC: 5 | RNVC: 2
CF 400 649 A: RNCC: 5 | RNVC: 2
CF400649A: RNCC: 5 | RNVC: 2
CF 400 649 A: RNCC: 5 | RNVC: 2

3 May 1980

5340-12-313-8225
Double Angle Bracket

123138225
4.0471: RNCC: 3 | RNVC: 2

10 May 1988

5340-12-386-1334
Spring Tension Clip

123861334
2481-393300.026.0: RNCC: 2 | RNVC: 2
2481-393300.026.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-347-2955
Friction Catch

123472955
8-4232.03: RNCC: 2 | RNVC: 2
9812211: RNCC: 3 | RNVC: 2
8-4232.03: RNCC: 5 | RNVC: 2
8-4232.03: RNCC: 5 | RNVC: 9
9812211: RNCC: 5 | RNVC: 9

24 Nov 1998

5340-12-359-1807
Mounting Bracket

123591807
9455461182: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-372-2345
Dust And Moisture Seal Protective Plug

123722345
49444325-602: RNCC: 3 | RNVC: 2
49444325-602: RNCC: 5 | RNVC: 2

29 Jun 2007

5340-12-362-6158
Mounting Bracket

123626158
10020870: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-370-7958
Angle Bracket

123707958
7H0422847A: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-197-3387
Angle Bracket

121973387
4255510625: RNCC: 3 | RNVC: 2
A4255510625: RNCC: 5 | RNVC: 2

13 Oct 1983

5340-12-305-0578
Angle Bracket

123050578
A-296712-133: RNCC: 3 | RNVC: 2
A296712-133: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-315-7200
Handwheel

123157200
021018: RNCC: 3 | RNVC: 2
AF5659/E-4 POS. 46: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-393-0197
Metal Grille

123930197
1030105-182331.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-139-7315
Spring Loaded Cylinder Fastener

121397315
7-4033: RNCC: 3 | RNVC: 2
7-4033: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-2437
Mounting Bracket

127022437
VG95211-ML-127022437: RNCC: 2 | RNVC: 2
30.7712.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-123-4007
Retaining Strap

121234007
81974010036: RNCC: 3 | RNVC: 2
R7148: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-168-4609
Loop Clamp

121684609
WW 306 642 -U: RNCC: 2 | RNVC: 2
WW 306 642 -U: RNCC: 3 | RNVC: 9
WW 306 642 -U: RNCC: 5 | RNVC: 2
WW3066420U: RNCC: 5 | RNVC: 2
WW3066420U: RNCC: 5 | RNVC: 9

15 Mar 1977

5340-12-387-9421
Angle Bracket

123879421
2322964000: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-151-1306
Retaining Strap

121511306
521D18722: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-2589
Rod End Clevis

123022589
6209960001: RNCC: 3 | RNVC: 2
A6209960001: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-12-306-8157
Expansion Shield

123068157
S4: RNCC: 3 | RNVC: 2
2501041: RNCC: 5 | RNVC: 2
50104: RNCC: 5 | RNVC: 2

4 Apr 1986

5340-12-391-4430
Access Cover

123914430
I010113TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-363-5798
Loop Clamp

123635798
0122 1985: RNCC: 3 | RNVC: 2
571288477: RNCC: 5 | RNVC: 2

6 Jul 2004

5340-12-197-8528
Retaining Strap

121978528
3122651236: RNCC: 3 | RNVC: 2
3122651036: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-12-359-4911
Nonmetallic Bumper

123594911
7825.10.02: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-303-9223
Electrical-Mechanical Equipment Post

123039223
3378115214: RNCC: 3 | RNVC: 2

21 May 1985

5340-12-357-8637
Angle Bracket

123578637
2300042-255291.000: RNCC: 2 | RNVC: 2
2300042-255291.000: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-12-347-5614
Loop Clamp

123475614
RBXAS-6: RNCC: 3 | RNVC: 2
V-SCHELLE MIT EXCENTERVERSCHLUSS: RNCC: 5 | RNVC: 9

7 Jan 1999

5340-12-357-6356
Mounting Bracket

123576356
2300223-180150.00.0: RNCC: 2 | RNVC: 2
2300223-180150.00.0: RNCC: 3 | RNVC: 2
2300223-180150-00-0: RNCC: 5 | RNVC: 9

9 Jul 2002

5340-12-701-3486
Mounting Bracket

127013486
VG95211-ML-127013486: RNCC: 2 | RNVC: 2
5.12.5111.3800.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-9409
Metal Runner

123219409
702-141600-956-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-701-6962
Angle Bracket

127016962
VG95211-ML-127016962: RNCC: 2 | RNVC: 2
5.12.7222.8030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-2208
Protection Bellows

123302208
11151702: RNCC: 3 | RNVC: 2
11151701: RNCC: 5 | RNVC: 2

17 Nov 1992

5340-12-364-2276
Retaining Strap

123642276
55 657.499: RNCC: 3 | RNVC: 2
0000945342: RNCC: 5 | RNVC: 2

2 Sep 2004

5340-12-380-3992
Mounting Plate

123803992
2133-0014-1458: RNCC: 3 | RNVC: 2

26 Oct 2009

5340-12-173-8531
Section Block Clamp

121738531
PAN4271-5: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-323-5556
Helical Compression Spring Seat

123235556
E811.00-5-NR2: RNCC: 3 | RNVC: 2

6 Dec 1990

5340-12-305-7101
Nonmetallic Bumper

123057101
DIN95364-B50X28-NR65STM10X12: RNCC: 2 | RNVC: 2
1.50.28.4B.65NR/ST-M10X12: RNCC: 5 | RNVC: 2
83605-50X28-M10X12.NR65.ST: RNCC: 5 | RNVC: 2
81960200288: RNCC: 5 | RNVC: 2
VG95364-B50X28-NR65STM10X12: RNCC: 5 | RNVC: 9
VG95364-B50X28X12-NR65ST: RNCC: 5 | RNVC: 9
VG95364-B50X28-M10X12-NR65ST: RNCC: 5 | RNVC: 9

6 Dec 1985

5340-12-358-9517
Air Inlet-Outlet Frame

123589517
2500261-063000.010.0: RNCC: 2 | RNVC: 2
2500261-063000.010.0: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-197-9947
T Plate

121979947
P-244601-752: RNCC: 3 | RNVC: 2
P244601-752: RNCC: 5 | RNVC: 2

8 Dec 1983

5340-12-701-5683
Mounting Bracket

127015683
VG95211-ML-127015683: RNCC: 2 | RNVC: 2
5.12.6149.0020.12: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-9331
Rod End Clevis

123549331
P-876058-004: RNCC: 3 | RNVC: 2
P876058-004: RNCC: 5 | RNVC: 2

7 Sep 2001

5340-12-301-2029
Angle Bracket

123012029
A-244829-759: RNCC: 3 | RNVC: 2
A244829-759: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-301-0298
Dust And Moisture Seal Protective Cap

123010298
TK-BA35-5340-380: RNCC: 2 | RNVC: 2
M0283 9230: RNCC: 3 | RNVC: 2
1542-310.03(3): RNCC: 5 | RNVC: 9

19 Sep 1984

5340-12-303-2422
Mending Plate

123032422
P-886768-001: RNCC: 3 | RNVC: 2
P886768-001: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-194-2664
Electrical-Mechanical Equipment Post

121942664
VG95148C5XM2,5X27-AL: RNCC: 2 | RNVC: 2
4692087: RNCC: 3 | RNVC: 2
VG95148C5XM2,5X27-AL: RNCC: 3 | RNVC: 2
469.2087: RNCC: 5 | RNVC: 2

18 Oct 1982

5340-12-701-6829
Mounting Plate

127016829
VG95211-ML-127016829: RNCC: 2 | RNVC: 2
5.12.7217.0551.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-337-0740
Double Angle Bracket

123370740
23333-261460.00.0: RNCC: 3 | RNVC: 2
2350L23: RNCC: 5 | RNVC: 2

17 Jan 1995

5340-12-159-7709
Dust And Moisture Seal Protective Cap

121597709
14021-12003-02: RNCC: 3 | RNVC: 2
893738: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-125-1350
Retaining Strap

121251350
0030986: RNCC: 3 | RNVC: 2
0047-156: RNCC: 5 | RNVC: 2
0047156: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-312-7156
Mounting Bracket

123127156
1068947: RNCC: 2 | RNVC: 2
1068947: RNCC: 3 | RNVC: 2

29 Jan 1988

5340-12-309-7943
Access Cover

123097943
6127353: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-312-6655
Electrical-Mechanical Equipment Post

123126655
107325: RNCC: 3 | RNVC: 2
107325: RNCC: 6 | RNVC: 9

25 Jan 1988

5340-12-321-9117
Double Angle Bracket

123219117
GLZ9300276R1: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-353-5019
Access Cover

123535019
160-75546: RNCC: 3 | RNVC: 2

2 Apr 2001

5340-12-392-3397
Angle Bracket

123923397
4100095-986144.000.0: RNCC: 2 | RNVC: 2
4100095-986144.000.0: RNCC: 3 | RNVC: 2

28 May 2013

5340-12-343-8273
Hinge Torsion Bar

123438273
3.1537E: RNCC: 3 | RNVC: 2
7304617: RNCC: 5 | RNVC: 2

4 Aug 1997

5340-12-318-0956
Rod End Clevis

123180956
22010.0.04.020.00: RNCC: 2 | RNVC: 2
22010.0.04.020.00: RNCC: 3 | RNVC: 2

12 Jun 1989

5340-12-315-9153
Angle Bracket

123159153
2300264-262300.03.0: RNCC: 2 | RNVC: 2
2300264-262300.03.0: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-12-333-5829
Screw Thread Insert And Tool Assortment

123335829
0185 1050 075: RNCC: 3 | RNVC: 2
C 5791 307 B: RNCC: 5 | RNVC: 2
01851050075: RNCC: 5 | RNVC: 2
C 5791 307 B: RNCC: 5 | RNVC: 2
C5791307B: RNCC: 5 | RNVC: 9

7 Jan 1994

5340-12-164-3064
Nonmetallic Bumper

121643064
403 987 04 14: RNCC: 3 | RNVC: 2
4039870414: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-9337
Recess Handle

123119337
269-1: RNCC: 3 | RNVC: 2
91478865: RNCC: 5 | RNVC: 2
352202322520: RNCC: 5 | RNVC: 2

29 Oct 1987

5340-12-327-2146
Cane Bolt

123272146
1000227-2000.06: RNCC: 2 | RNVC: 2
1000227-2000.06: RNCC: 3 | RNVC: 2

17 Dec 1991

5340-12-043-3672

5340-12-134-6721

5340-12-361-5704
Snap Hook

123615704
1505809: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-195-0509
Nut And Bolt Locking Plate

121950509
WG 402 562: RNCC: 2 | RNVC: 2
WG 402 562: RNCC: 3 | RNVC: 2
WG 402 562: RNCC: 3 | RNVC: 9
WG402562: RNCC: 5 | RNVC: 2
WG402562: RNCC: 5 | RNVC: 9

7 Jan 1983

5340-12-391-9119
Bumper

123919119
109048-20011: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-12-364-5000
Mounting Bracket

123645000
4258602814: RNCC: 3 | RNVC: 2

2 Oct 2004

5340-12-365-4503
Retaining Strap

123654503
05023900: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-388-0976
Expansion Shield

123880976
050492: RNCC: 3 | RNVC: 2
4006209504925: RNCC: 5 | RNVC: 2

23 Feb 2012

5340-12-322-1914
Rod End Clevis

123221914
0216 6432: RNCC: 3 | RNVC: 2
91496175: RNCC: 5 | RNVC: 2
2166432KZ0150-44: RNCC: 5 | RNVC: 9

31 Jul 1990

5340-12-356-7153
Spring Tension Clip

123567153
823819679: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-341-9158
Dust And Moisture Seal Boot

123419158
3353570022: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-12-170-6910
Loop Clamp

121706910
HNY18V: RNCC: 3 | RNVC: 2
211-65189: RNCC: 5 | RNVC: 2
203018101: RNCC: 5 | RNVC: 9

28 Jul 1977

5340-12-361-4344
Loop Clamp

123614344
1504296: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-372-4740
Angle Bracket

123724740
9414295668: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-12-316-8301
Mounting Plate

123168301
2300279-5093.01: RNCC: 2 | RNVC: 2
2300279-5093.01: RNCC: 3 | RNVC: 2
2300279-5093.01: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-194-2110
Door Button

121942110
2300227-341100.008: RNCC: 2 | RNVC: 2
5548256: RNCC: 3 | RNVC: 2
554.8256: RNCC: 5 | RNVC: 2
2300227-341100.008: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-315-4044
Helical Compression Spring Seat

123154044
1460326326: RNCC: 3 | RNVC: 2
(7001)5340123154044: RNCC: 5 | RNVC: 2
93156621: RNCC: 5 | RNVC: 2
1460326326: RNCC: 5 | RNVC: 2

19 Oct 1988

5340-12-094-4190

5340-12-195-0681
Nonmetallic Bumper

121950681
557.7650: RNCC: 3 | RNVC: 2
5577650: RNCC: 5 | RNVC: 2

10 Jan 1983

5340-12-382-5845
Access Door Hinge

123825845
1032-U6: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-12-176-2594
Webbing Strap

121762594
183860863: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-301-5801
Retaining Strap

123015801
4173404: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-122-6318
Retaining Strap

121226318
4049950042: RNCC: 3 | RNVC: 2
222010112800: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-389-5816
Swivel Caster

123895816
L-ALTH 150K-ST: RNCC: 3 | RNVC: 2
L-ALTH 150K-ST: RNCC: 5 | RNVC: 2

24 Jul 2012

5340-12-300-8847
Double Angle Bracket

123008847
1423-351.12(3): RNCC: 3 | RNVC: 2

7 Sep 1984

5340-12-312-4567
Butt Hinge Leaf

123124567
1 76 215: RNCC: 3 | RNVC: 9
176215: RNCC: 3 | RNVC: 9

8 Jan 1988

5340-12-323-4743
Resilient Mount

123234743
742311S1BL.2: RNCC: 3 | RNVC: 2
742 311 S1 BL 2: RNCC: 5 | RNVC: 2
81.96210.0305: RNCC: 5 | RNVC: 2
81962100305: RNCC: 5 | RNVC: 2

29 Nov 1990

5340-12-354-4109
Access Cover

123544109
135 1002/2: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-193-3949
Plain Solid Disk

121933949
4-87906: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-371-3530
Mounting Plate

123713530
1227 9808: RNCC: 3 | RNVC: 2
12279808: RNCC: 5 | RNVC: 9

20 Mar 2007

5340-12-027-4685

5340-12-363-5844
Dust And Moisture Seal Protective Cap-Plug

123635844
1000118-25: RNCC: 2 | RNVC: 2
1000118-25: RNCC: 3 | RNVC: 2

6 Jul 2004

5340-12-179-8389
Mending Plate

121798389
CF 432 629: RNCC: 3 | RNVC: 2
CF 432 629: RNCC: 5 | RNVC: 2
CF 432 629: RNCC: 5 | RNVC: 2
CF432629: RNCC: 5 | RNVC: 9
CF432629: RNCC: 5 | RNVC: 9
CF432629: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-379-5705
Angle Bracket

123795705
S259M8057244: RNCC: 3 | RNVC: 2

10 Aug 2009

5340-12-363-0523
Angle Bracket

123630523
947174677: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-316-2926
Butt Hinge Leaf

123162926
4085706: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-337-6266
Double Angle Bracket

123376266
105-61860.08: RNCC: 3 | RNVC: 2

20 Mar 1995

5340-12-370-2902
Dust And Moisture Seal Protective Cap-Plug

123702902
Z0159: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-12-026-9426

5340-12-317-3435
Strap Fastener Loop

123173435
2300279-4750.01: RNCC: 2 | RNVC: 2
2300279-4750.01: RNCC: 3 | RNVC: 2
9872020: RNCC: 5 | RNVC: 9
2300279-4750.01: RNCC: 5 | RNVC: 9

30 Mar 1989

5340-12-333-2114
Mounting Bracket

123332114
81669225002: RNCC: 2 | RNVC: 2
81669225002: RNCC: 3 | RNVC: 2
81.66922.5002: RNCC: 3 | RNVC: 2

10 Nov 1993

5340-12-162-7842
Retaining Band

121627842
307L22702: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-164-8407
Door Button

121648407
92100727: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-324-1130
Mounting Bracket

123241130
458696: RNCC: 2 | RNVC: 2
458696: RNCC: 3 | RNVC: 2
458696: RNCC: 5 | RNVC: 2
458696: RNCC: 5 | RNVC: 9

22 Jan 1991

5340-12-358-0854
Mounting Bracket

123580854
2500262-199600.002.0: RNCC: 2 | RNVC: 2
2500262-199600.002.0: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-353-1815
Mounting Bracket

123531815
2500238-041113.000.0: RNCC: 2 | RNVC: 2
2500238-041113.000.0: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-341-0785
Mounting Bracket

123410785
SK475-183066.000.0: RNCC: 3 | RNVC: 2
1593400: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-12-195-9384
Handwheel

121959384
NO PRIMARY REF 12-195-9384: RNCC: 3 | RNVC: 2
VG85085-100X9-O.8040: RNCC: 5 | RNVC: 9
100X9VG85085-GTW-40: RNCC: 5 | RNVC: 9
100X9VG85085-GTW40: RNCC: 5 | RNVC: 9
100X9VG85085GTW40: RNCC: 5 | RNVC: 9

4 May 1983

5340-12-136-5789
Resilient Mount

121365789
1026-3-225: RNCC: 3 | RNVC: 2
14002-50-37: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-6304
Hand Crank

121886304
VG85086-A-125X11-AM: RNCC: 2 | RNVC: 2
VG85086-A-125X11-AM: RNCC: 3 | RNVC: 2
VG85086-A-125X11-AM: RNCC: 3 | RNVC: 2
A125X11VG85086GCUSN5ZNPB: RNCC: 3 | RNVC: 9
VG85086-A-125X11-AM: RNCC: 3 | RNVC: 9
A125X11VG85086-RG5: RNCC: 5 | RNVC: 9
A125X11VG85086GCUSN5ZNPB: RNCC: 5 | RNVC: 9

21 Jul 1981

5340-12-187-6299
Mending Plate

121876299
6.226.0.650.033.4: RNCC: 3 | RNVC: 9
6-226-0-650-033-4: RNCC: 5 | RNVC: 9

21 Apr 1981

5340-12-306-9940
Detent Plunger

123069940
DIN6311-S20-2.0380.10: RNCC: 2 | RNVC: 2
DIN6311-S20-2.0380.10: RNCC: 3 | RNVC: 2
S20DIN6311-2.0380.10: RNCC: 5 | RNVC: 2

25 Apr 1986

5340-12-340-7563
Dust And Moisture Seal Protective Cap

123407563
C2450-1410-0001-130000: RNCC: 3 | RNVC: 2

5 Jun 1996

5340-12-378-0689
Mounting Bracket

123780689
320.001-061: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-342-9303
Helical Compression Spring Retainer

123429303
5011-161: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-197-5182
Double Angle Bracket

121975182
C22117-A326-C11: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-351-2018
Mounting Bracket

123512018
8854 121-141: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-12-350-4185
Butt Hinge Leaf

123504185
J52424532-001: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-315-6116
Resilient Mount

123156116
DIN95363-A50X30-M10X34-NR65ST: RNCC: 2 | RNVC: 2
81100-50X30-M10X34.NR65.ST: RNCC: 5 | RNVC: 2
25333/A-BSTN6590: RNCC: 5 | RNVC: 2
25333/A-BSTN65: RNCC: 5 | RNVC: 2
VG95363-A50X30-M10X34-NR65ST: RNCC: 5 | RNVC: 9

12 Nov 1988

5340-12-700-8765
Loop Clamp

127008765
VG95211-ML-127008765: RNCC: 2 | RNVC: 2
1667S-50-21: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-385-4566
Mounting Bracket

123854566
5805550340: RNCC: 3 | RNVC: 2

6 Jun 2011

5340-12-392-9934
Protection Bellows

123929934
112201: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-12-168-2793
Loop Clamp

121682793
LN9491B5: RNCC: 2 | RNVC: 2
LN9491B05: RNCC: 5 | RNVC: 2

4 Mar 1977

5340-12-325-0792
Electrical-Mechanical Equipment Post

123250792
66.3578.410.01-A001: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-357-9169
Mounting Bracket

123579169
2300042-254220.000: RNCC: 2 | RNVC: 2
2300042-254220.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-300-6662
Angle Bracket

123006662
4164320640: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-199-9159
Dust And Moisture Seal Protective Cap

121999159
999.28945: RNCC: 3 | RNVC: 2
591.8191: RNCC: 5 | RNVC: 2
5918191: RNCC: 5 | RNVC: 2

16 Jun 1984

5340-12-300-3105
Butt Hinge Leaf

123003105
3097230351: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-091-6409

5340-12-379-1505
Helical Compression Spring Seat

123791505
5D19266: RNCC: 3 | RNVC: 2

29 Jun 2009

5340-12-391-6861
Frame Se Connector

123916861
6288150214: RNCC: 3 | RNVC: 2

27 Mar 2013

5340-12-161-9883
Spring Tension Clip

121619883
49 0667 78: RNCC: 3 | RNVC: 2
49066778: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-364-0291
Hand Crank

123640291
2706-272000: RNCC: 3 | RNVC: 2

12 Aug 2004

5340-12-043-2642

5340-12-317-3900
Electrical-Mechanical Equipment Post

123173900
7166002: RNCC: 3 | RNVC: 2

4 Apr 1989

5340-12-316-8270
Cane Bolt

123168270
2300279-9733.01: RNCC: 2 | RNVC: 2
2300279-9733.01: RNCC: 3 | RNVC: 2
2300279-9733.01: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-050-3666

5340-12-179-7637
Retaining Strap

121797637
81974010739: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-153-6799

5340-12-180-9069
Dust And Moisture Seal Protective Plug

121809069
81960020103: RNCC: 3 | RNVC: 2

11 Oct 1979

5340-12-356-8961
Rod End Clevis

123568961
1948074K2401: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-315-7627
Helical Compression Spring Seat

123157627
3000-311500.04: RNCC: 3 | RNVC: 2

25 Nov 1988

5340-12-364-1961
Cushioning Pad

123641961
GSERD2010.07.05.04: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-184-1533
Friction Catch

121841533
4090-60X10MM: RNCC: 3 | RNVC: 2

28 Jun 1980

5340-12-320-4764
Mending Plate

123204764
40 0165 471: RNCC: 3 | RNVC: 2
40 0165 471: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-339-1257
Mounting Bracket

123391257
3640920540: RNCC: 3 | RNVC: 2

12 Oct 1995

5340-12-360-0044
Mounting Bracket

123600044
9414751340: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-022-6241

5340-12-133-2946

5340-12-366-8806
Expansion Plug

123668806
5800160033: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-380-5854
Electromagnetic Lock

123805854
34RRF: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-12-179-7602
Mending Plate

121797602
81429062002: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-345-9897
Mounting Bracket

123459897
1AJ0045: RNCC: 3 | RNVC: 2
1AJ0045: RNCC: 3 | RNVC: 2

27 May 1998

5340-12-300-8875
Double Angle Bracket

123008875
250146-191301.00.0: RNCC: 3 | RNVC: 2
250146-191301-00-0: RNCC: 5 | RNVC: 2
250146-191301.00.0: RNCC: 5 | RNVC: 9

7 Sep 1984

5340-12-384-4210
Pawl Fastener

123844210
EDAK-5700.6000: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-174-3375
Angle Bracket

121743375
52-0164-000-05: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-177-7205
Dust And Moisture Seal Protective Cap

121777205
52-1405-803-03: RNCC: 3 | RNVC: 2

14 Feb 1979

5340-12-323-9874
Butt Hinge Leaf

123239874
22-310-JL-024: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-196-5526
Pad Eye

121965526
C22136-A1000-C214: RNCC: 3 | RNVC: 2
C22136A1000C214: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-180-8852
Angle Bracket

121808852
2500035-133000.00: RNCC: 2 | RNVC: 2
2500035-133000-00: RNCC: 5 | RNVC: 2
2500035-133000-00: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-179-8482
Resilient Mount

121798482
E1E 41S 72 FB: RNCC: 3 | RNVC: 2
5801598-0000-005: RNCC: 5 | RNVC: 2
2242028705: RNCC: 5 | RNVC: 2
VE41HDS72FB: RNCC: 5 | RNVC: 2
E1E41S72FB: RNCC: 5 | RNVC: 2
22420 28705: RNCC: 5 | RNVC: 9
5801598-0000-005: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-359-9467
Mounting Plate

123599467
J28130141-401: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-701-9043
Angle Bracket

127019043
VG95211-ML-127019043: RNCC: 2 | RNVC: 2
N1300: RNCC: 3 | RNVC: 2
0501403193799: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-309-7452
Access Cover

123097452
70.1200.211-03: RNCC: 3 | RNVC: 2

23 Feb 1987

5340-12-360-8733
Access Cover

123608733
B70-0001-001-002: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-12-353-4247
Mounting Bracket

123534247
3100-700: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-349-3867
Access Cover

123493867
592601-9010.000: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-041-2257

5340-12-185-5716
Access Cover

121855716
0287 9399: RNCC: 3 | RNVC: 2
2879399: RNCC: 5 | RNVC: 2
2879399KZ0704-78: RNCC: 5 | RNVC: 2

16 Oct 1980

5340-12-010-9795

5340-12-327-0066
Access Cover

123270066
6399642: RNCC: 3 | RNVC: 2

19 Nov 1991

5340-12-150-0676

5340-12-040-0315

5340-12-375-4637
Mounting Bracket

123754637
1520794: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-175-2552
Window Regulator Handle

121752552
WN2124: RNCC: 3 | RNVC: 2
101256901: RNCC: 5 | RNVC: 2

4 Sep 1978

5340-12-341-5647
Lock-Release Lever

123415647
0892001: RNCC: 3 | RNVC: 2
GZ08920: RNCC: 5 | RNVC: 2

21 Sep 1996

5340-12-333-9557
Access Cover

123339557
66.3518.240.00-A002: RNCC: 3 | RNVC: 2

28 Feb 1994

5340-12-363-5102
Mounting Bracket

123635102
T341M1040101: RNCC: 2 | RNVC: 2
T341M1040101: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-150-9785
Expansion Shield

121509785
S8: RNCC: 3 | RNVC: 2
5VC1533: RNCC: 5 | RNVC: 2
50108: RNCC: 5 | RNVC: 2
2501081: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-027-0731

5340-12-363-1111
Loop Clamp

123631111
06152009096: RNCC: 3 | RNVC: 2
504064331: RNCC: 5 | RNVC: 2

5 May 2004

5340-12-360-9950
Mounting Bracket

123609950
0853 9350.035: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-315-7107
Dust And Moisture Seal Protective Cap

123157107
529205: RNCC: 3 | RNVC: 2

22 Nov 1988

5340-12-348-5975
Mounting Plate

123485975
NN31350G01: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-12-385-3635
Mounting Bracket

123853635
5550780741: RNCC: 3 | RNVC: 2

26 May 2011

5340-12-044-1826

5340-12-134-8770

5340-12-345-7100
Access Cover

123457100
2300211-990410.000.0: RNCC: 2 | RNVC: 2
2300211-990410.000.0: RNCC: 3 | RNVC: 2

17 Apr 1998

5340-12-168-3125
Loop Clamp

121683125
50011-6: RNCC: 3 | RNVC: 2

7 Mar 1977

5340-12-371-1529
Mounting Plate

123711529
4618110111: RNCC: 3 | RNVC: 2

21 Feb 2007

5340-12-181-6591
Loop Clamp

121816591
4119950044: RNCC: 3 | RNVC: 2

10 Dec 1979

5340-12-305-5978
Access Cover

123055978
4068365111: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-121-7836

5340-12-158-6746

5340-12-365-1250
Webbing Strap

123651250
4618980277: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-173-0752
Double Angle Bracket

121730752
6020193: RNCC: 3 | RNVC: 2

20 Mar 1978

5340-12-353-0524
Angle Bracket

123530524
52.2124.085.02: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-12-094-0931

5340-12-094-6534

5340-12-308-4806
Resilient Mount

123084806
SZ4/86048: RNCC: 3 | RNVC: 2
SZ4/86048: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-702-9119
Retaining Strap

127029119
VG95211-ML-127029119: RNCC: 2 | RNVC: 2
1667S50-32: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-321-1913
Mounting Plate

123211913
5801761-000000.002: RNCC: 2 | RNVC: 2
5801761-000000.002: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-12-324-4941
Webbing Strap

123244941
335947-2103.000: RNCC: 2 | RNVC: 2
335947-2103.000: RNCC: 3 | RNVC: 2
335947-2103.000: RNCC: 5 | RNVC: 2
335947-2103.000: RNCC: 5 | RNVC: 9
000-E4-22X2,0X1000-PE-RAL6031: RNCC: 6 | RNVC: 9

22 Feb 1991

5340-12-326-9722
Helical Compression Spring Seat

123269722
279.823 039: RNCC: 3 | RNVC: 2
279.823 039: RNCC: 5 | RNVC: 9
1392152-350000.010: RNCC: 5 | RNVC: 9

14 Nov 1991

5340-12-702-2456
Mounting Bracket

127022456
VG95211-ML-127022456: RNCC: 2 | RNVC: 2
30.7802.30: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-341-6215
Bow Handle

123416215
3900096-110000.02: RNCC: 2 | RNVC: 2
62272: RNCC: 3 | RNVC: 2
3900096-110000.02: RNCC: 5 | RNVC: 2

3 Oct 1996

5340-12-342-2730
Helical Compression Spring Seat

123422730
422325 526 06 04 08: RNCC: 3 | RNVC: 2
S3628841: RNCC: 5 | RNVC: 2
S36288-41: RNCC: 5 | RNVC: 2
P36288-41S: RNCC: 5 | RNVC: 2

14 Jan 1997

5340-12-178-8064
Angle Bracket

121788064
C119-A2-C93: RNCC: 2 | RNVC: 2
C119A2C93: RNCC: 3 | RNVC: 2
C119-A2-C93: RNCC: 5 | RNVC: 2
C119A2C93: RNCC: 5 | RNVC: 2
C119-A2-C93: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-145-9052
Snap Hook

121459052
DIN5299-C80ZN: RNCC: 2 | RNVC: 2
DIN5299-C80-ZN: RNCC: 3 | RNVC: 2
245-80X8 VERZINKT: RNCC: 3 | RNVC: 9
C80DIN5299VZK: RNCC: 5 | RNVC: 2
DIN5299-C80-ZN: RNCC: 5 | RNVC: 2
C80DIN5299VERZINKT: RNCC: 5 | RNVC: 2
245-80X8VERZINKT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-151-3113
Catch Strike

121513113
VG95528-1ST: RNCC: 2 | RNVC: 2
VG95528-1ST: RNCC: 3 | RNVC: 2
2809: RNCC: 3 | RNVC: 2
5800358-220000.11: RNCC: 5 | RNVC: 2
1VG95528: RNCC: 5 | RNVC: 2
571345577: RNCC: 5 | RNVC: 2
ST5800358-220000-11: RNCC: 5 | RNVC: 2
5800358-220000.11: RNCC: 5 | RNVC: 9
ST5800358-220000-11: RNCC: 5 | RNVC: 9
5800358-220000.11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-3421
Mending Plate

121983421
27 0319 194: RNCC: 2 | RNVC: 2
9849647: RNCC: 3 | RNVC: 2
27 0319 194: RNCC: 5 | RNVC: 9
9849647: RNCC: 5 | RNVC: 9
270319194: RNCC: 5 | RNVC: 9

18 Jan 1984

5340-12-341-3391
Mounting Bracket

123413391
52.3109.801.10: RNCC: 2 | RNVC: 2
52.3109.801.10: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-12-341-7281
Helical Compression Spring Seat

123417281
1460522308: RNCC: 3 | RNVC: 2
1460522308: RNCC: 5 | RNVC: 2
1460522308: RNCC: 5 | RNVC: 2
CBU1933: RNCC: 5 | RNVC: 2

19 Oct 1996

5340-12-376-9278
Loop Clamp

123769278
0000948841: RNCC: 3 | RNVC: 2
7098759: RNCC: 5 | RNVC: 2

24 Nov 2008

5340-12-324-6572
Mending Plate

123246572
54.0024.765.03: RNCC: 2 | RNVC: 2
54.0024.765.03: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-12-355-4878
Mounting Bracket

123554878
4618907314: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-373-3589
Loop Clamp

123733589
L321M5833101: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-12-365-7078
Mounting Bracket

123657078
9414291568: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-181-7817
Door Handle

121817817
183845740A: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-188-8456
Loop Clamp

121888456
R30: RNCC: 3 | RNVC: 2
55100300: RNCC: 3 | RNVC: 2
R30: RNCC: 5 | RNVC: 2
55100300: RNCC: 5 | RNVC: 2
R30: RNCC: 5 | RNVC: 2
152.10.060: RNCC: 5 | RNVC: 2
152.10.060: RNCC: 5 | RNVC: 2
15210060: RNCC: 5 | RNVC: 2

3 Aug 1981

5340-12-383-5545
Manual Control Handle

123835545
2902520008: RNCC: 3 | RNVC: 2

8 Nov 2010

5340-12-185-0548
Nonmetallic Bumper

121850548
111953197: RNCC: 3 | RNVC: 2

6 Sep 1980

5340-12-199-3613
Plain Solid Disk

121993613
3523020176: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-175-4706
Resilient Mount

121754706
330807547: RNCC: 3 | RNVC: 2
330807547: RNCC: 3 | RNVC: 2
07547: RNCC: 5 | RNVC: 2
330807547: RNCC: 5 | RNVC: 2

19 Sep 1978

5340-12-198-5602
Electrical-Mechanical Equipment Post

121985602
5800884-7124.008: RNCC: 3 | RNVC: 2

9 Feb 1984

5340-12-372-4937
Door Handle Unit

123724937
10019687: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-352-6776
Angle Bracket

123526776
5400049-725000.08: RNCC: 2 | RNVC: 2
5400049-725000.08: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-391-9083
Loop Clamp

123919083
0029952701: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-12-371-1783
Mounting Bracket

123711783
2277-312000B02B: RNCC: 3 | RNVC: 2

23 Feb 2007

5340-12-198-4224
Mending Plate

121984224
27 0323 074: RNCC: 2 | RNVC: 2
9859254: RNCC: 3 | RNVC: 9
27 0323 074: RNCC: 5 | RNVC: 2
270323074: RNCC: 5 | RNVC: 9
27 0323 074: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-374-2567
Manual Control Lever

123742567
L521M1059203: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-331-7439
Butt Hinge Leaf

123317439
1537101: RNCC: 2 | RNVC: 2
1537101: RNCC: 3 | RNVC: 2
GZ15371: RNCC: 5 | RNVC: 2

16 Jun 1993

5340-12-334-0127
Angle Bracket

123340127
4623150240: RNCC: 3 | RNVC: 2
7013-A3: RNCC: 5 | RNVC: 2
ZR23150240: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-12-701-7522
Mounting Bracket

127017522
VG95211-ML-127017522: RNCC: 2 | RNVC: 2
5.12.7615.8400.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-0944
Loop Clamp

123590944
DIN3016-1-D1-15X15-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Dec 2002

5340-12-361-9775
Spacing Threaded Standoff

123619775
2 410 362 000: RNCC: 3 | RNVC: 2
BOSCH-2.410.362.000: RNCC: 5 | RNVC: 2
BOSCH-2.410.362.000: RNCC: 5 | RNVC: 2

11 Dec 2003

5340-12-337-7917
Multiple Angle Bracket

123377917
465-151730.000: RNCC: 3 | RNVC: 9
9895127: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-12-359-6829
Nonmetallic Bumper

123596829
2500261-062000.004.0: RNCC: 2 | RNVC: 2
2500261-062000.004.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-326-2693
Butt Hinge Leaf

123262693
2300348-187000.002.0: RNCC: 2 | RNVC: 2
2300348-187000.002.0: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-12-385-3633
Spring Loaded Cylinder Fastener

123853633
GN613-5-AK-NI: RNCC: 3 | RNVC: 2

26 May 2011

5340-12-321-0369
Handwheel

123210369
DIN950-A3-250X26-AL: RNCC: 2 | RNVC: 2

19 Mar 1990

5340-12-340-5196
Access Cover

123405196
11.07688-0008: RNCC: 3 | RNVC: 2
11.07688-0008: RNCC: 5 | RNVC: 2
11.07688-0008: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-130-4752
Expansion Plug

121304752
DIN470-28-ST-ROH: RNCC: 2 | RNVC: 2
28DIN470: RNCC: 5 | RNVC: 2
28DIN470R0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-321-4835
Resilient Mount

123214835
DIN95366-A1-NR40ST: RNCC: 2 | RNVC: 2
58540BSTN4090: RNCC: 5 | RNVC: 2
58540.NR40.ST: RNCC: 5 | RNVC: 2
58540BSTN4090: RNCC: 5 | RNVC: 2
58540-40SH: RNCC: 5 | RNVC: 2
VG95366-A1-NR40ST: RNCC: 5 | RNVC: 9

23 May 1990

5340-12-300-8182
Metal Runner

123008182
5801411-4125.003: RNCC: 3 | RNVC: 2
5801411-4125-003: RNCC: 5 | RNVC: 2

1 Sep 1984

5340-12-367-4766
Padlock

123674766
909190207: RNCC: 3 | RNVC: 2

24 Aug 2005

5340-12-368-3790
Hand Crank

123683790
GCE8004261R0101: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-12-306-8333
Angle Bracket

123068333
23111-7246.00: RNCC: 2 | RNVC: 2
23111-7246.00: RNCC: 3 | RNVC: 2
23111-7246.00: RNCC: 5 | RNVC: 9

9 Apr 1986

5340-12-199-3614
Ball Socket Seat

121993614
3093020050: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-337-1378
Mounting Bracket

123371378
81418015259: RNCC: 3 | RNVC: 2
81.41801.5259: RNCC: 5 | RNVC: 9

24 Jan 1995

5340-12-386-0655
Handwheel

123860655
24580.0316: RNCC: 3 | RNVC: 2
2458.316: RNCC: 5 | RNVC: 2

4 Aug 2011

5340-12-301-3828
Retaining Strap

123013828
514137098: RNCC: 3 | RNVC: 2

11 Oct 1984

5340-12-322-3533
Mounting Bracket

123223533
8050 4013: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-180-4506
Angle Bracket

121804506
4355450240: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-147-6961
Retaining Clip

121476961
4900-04-01: RNCC: 3 | RNVC: 2
204 156: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-1584
Electrical-Mechanical Equipment Post

123191584
2654-332621.01: RNCC: 2 | RNVC: 2
2654-332621.01: RNCC: 3 | RNVC: 2
2654-332 621.01: RNCC: 5 | RNVC: 9
679-02050201.01: RNCC: 5 | RNVC: 9
679-02050201.01: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-367-8501
Dust And Moisture Seal Boot

123678501
NO PRIMARY REF 12-367-8501: RNCC: 3 | RNVC: 2
7069509: RNCC: 5 | RNVC: 2

24 Oct 2005

5340-12-388-3809
Dust And Moisture Seal Protective Plug

123883809
420-20: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-12-370-6002
Access Cover

123706002
V6520-03010-133: RNCC: 2 | RNVC: 2
V6520-03010-133: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-12-360-8521
Angle Bracket

123608521
51974800343: RNCC: 3 | RNVC: 2
51.97480-0343: RNCC: 5 | RNVC: 2
5001006911: RNCC: 5 | RNVC: 2

16 Jul 2003

5340-12-364-6488
Spring Tension Clip

123646488
C79459-A1581-C25: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-360-0388
Nonmetallic Bumper

123600388
2300457-620020.003: RNCC: 2 | RNVC: 2
2300457-620020.003: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-322-8678
Retaining Strap

123228678
704-110192-000-0: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-12-194-7505
Nonmetallic Bumper

121947505
C22234-A1000-B30: RNCC: 3 | RNVC: 2
C22234A1000B30: RNCC: 5 | RNVC: 2

3 Dec 1982

5340-12-361-4703
Butt Hinge Leaf

123614703
2500262-196100.002.0: RNCC: 2 | RNVC: 2
2500262-196100.002.0: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-331-3121
Angle Bracket

123313121
M-APP-000000-30039-001: RNCC: 3 | RNVC: 2
M-APP-000000-30039-001: RNCC: 5 | RNVC: 9

21 Apr 1993

5340-12-344-3844
Mounting Plate

123443844
A-243796-015: RNCC: 3 | RNVC: 2
A243796-015: RNCC: 5 | RNVC: 2

22 Oct 1997

5340-12-149-9101
Nonmetallic Bumper

121499101
96007301: RNCC: 3 | RNVC: 2
515-201-B-06.00: RNCC: 3 | RNVC: 2
515-201-B-06.00: RNCC: 5 | RNVC: 2
845-515-201B06-00: RNCC: 5 | RNVC: 2
515-201B06-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-335-5156
Mounting Plate

123355156
704-163150-000-0: RNCC: 3 | RNVC: 2

25 Aug 1994

5340-12-368-8022
Double Angle Bracket

123688022
9997010-015141.000.0: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-12-702-3835
Rod End Connector

127023835
VG95211-ML-127023835: RNCC: 2 | RNVC: 2
5.12.5101.8890.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-381-6997
Mounting Plate

123816997
SK861-850524.003.0: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-12-195-2419
Loop Clamp

121952419
DIN3016-2-G1-55X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-55X20-W1-2: RNCC: 3 | RNVC: 2
SP55/20SKZ: RNCC: 3 | RNVC: 2
1510000055: RNCC: 5 | RNVC: 2
SP55-20SK: RNCC: 5 | RNVC: 2
VG95931-G55X20-W1: RNCC: 5 | RNVC: 9
DIN3016-G1-55X20-W1-2: RNCC: 5 | RNVC: 9

27 Jan 1983

5340-12-180-6338
Bow Handle

121806338
C107-A103-C76: RNCC: 2 | RNVC: 2
C107A103C76: RNCC: 3 | RNVC: 2
C107A103C76: RNCC: 5 | RNVC: 2
C107-A103-C76: RNCC: 5 | RNVC: 2
C107-A103-C76: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-317-6980
Access Door

123176980
3226800382: RNCC: 3 | RNVC: 2
322-680-0382: RNCC: 5 | RNVC: 2

2 May 1989

5340-12-388-9620
Mounting Bracket

123889620
4374211595: RNCC: 3 | RNVC: 2
7130647: RNCC: 5 | RNVC: 2

10 May 2012

5340-12-027-3122

5340-12-323-1841
Key Blank

123231841
683 1/2 K: RNCC: 3 | RNVC: 2
42487921: RNCC: 5 | RNVC: 2

30 Oct 1990

5340-12-309-0890
Nut And Bolt Locking Plate

123090890
4119 302 019: RNCC: 2 | RNVC: 2
4119 302 019: RNCC: 3 | RNVC: 2

12 Dec 1986

5340-12-349-6599
Mortise Latch

123496599
8474.1300: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-349-7432
Double Angle Bracket

123497432
T290M2005101: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-350-5596
Retaining Clip

123505596
10063-212000.09: RNCC: 3 | RNVC: 2
10063-212000.09: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-341-8528
Flush Lock

123418528
701843604A: RNCC: 3 | RNVC: 9
701843604D: RNCC: 3 | RNVC: 9

5 Nov 1996

5340-12-352-5018
Angle Bracket

123525018
05006700: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-12-193-2938
Retaining Strap

121932938
90.405.00.982: RNCC: 3 | RNVC: 2
0008353514: RNCC: 5 | RNVC: 2

8 Jul 1982

5340-12-331-8074
Access Cover

123318074
10138901: RNCC: 2 | RNVC: 2
10138901: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-350-8214
Retaining Bail

123508214
BD8102T032: RNCC: 2 | RNVC: 2
BD8102T032: RNCC: 3 | RNVC: 2
BD8102T032: RNCC: 5 | RNVC: 9

25 May 2000

5340-12-198-2865
Double Angle Bracket

121982865
66.3851.715.03-A001: RNCC: 3 | RNVC: 2
254244: RNCC: 5 | RNVC: 2

11 Jan 1984

5340-12-384-2202
Friction Catch

123842202
WM 22642: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-302-8329
Metal Runner

123028329
4900123-1700.02: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-385-9618
Access Cover

123859618
2500262-196720.000.0: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-12-144-6906
Spring Tension Clip

121446906
160-24901-08: RNCC: 3 | RNVC: 2
160-24901-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-2519
Mounting Bracket

127012519
VG95211-ML-127012519: RNCC: 2 | RNVC: 2
5.12.3700.3560.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-6759
Snap Hook

123426759
DIN5299-E70-ZN: RNCC: 2 | RNVC: 2
DIN5299-E70-VERZINKT: RNCC: 5 | RNVC: 2
DIN5299E-70X7-VERZ.: RNCC: 5 | RNVC: 2

13 Mar 1997

5340-12-338-7999
Mounting Plate

123387999
6700017-630410.01: RNCC: 2 | RNVC: 2
6700017-630410.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-130-3081
Spring Tension Clip

121303081
9056475095: RNCC: 3 | RNVC: 2
2682-1615-1: RNCC: 5 | RNVC: 2
90564 75095: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-362-3103
Mounting Bracket

123623103
70532-001: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-360-0913
Seal Retaining Plate

123600913
2500261-183415.000.0: RNCC: 2 | RNVC: 2
2500261-183415.000.0: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-701-4541
Loop Clamp

127014541
VG95211-ML-127014541: RNCC: 2 | RNVC: 2
5.12.5314.1000.69: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-4879
Mending Plate

123214879
702-283104-903-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-321-5270
Mending Plate

123215270
2782-360300.001.0: RNCC: 2 | RNVC: 2
2782-360300.001.0: RNCC: 3 | RNVC: 2

29 May 1990

5340-12-393-4479
Butt Hinge

123934479
160-72087: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-379-3912
Retaining Strap

123793912
66650A: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-394-0770
Dust And Moisture Seal Protective Cap

123940770
CTP40490P004: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-387-5700
Mounting Plate

123875700
30209233: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-383-6083
Lock-Release Lever

123836083
HV001G: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-12-329-2181
Butt Hinge

123292181
LN9172KFF104: RNCC: 2 | RNVC: 2

24 Jul 1992

5340-12-344-1865
Mending Plate

123441865
2996.10.73: RNCC: 3 | RNVC: 2
2996.1073: RNCC: 5 | RNVC: 2

24 Sep 1997

5340-12-308-7663
Metal Runner

123087663
351271250241: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-12-326-7896
Tee Hinge

123267896
1000227-3200: RNCC: 2 | RNVC: 2
1000227-3200: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-12-131-4148

5340-12-304-4889
Mending Plate

123044889
0224 9405: RNCC: 3 | RNVC: 2
0224 7343: RNCC: 5 | RNVC: 9
02247343EC0148-29: RNCC: 5 | RNVC: 9
02249405EC0148.29: RNCC: 5 | RNVC: 9
2247343EC0148-29: RNCC: 5 | RNVC: 9

24 Jul 1985

5340-12-125-1349
Retaining Strap

121251349
8409295: RNCC: 3 | RNVC: 2
1609-006: RNCC: 5 | RNVC: 2
1609006: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-7587
Mounting Bracket

123657587
5161-233110B01B: RNCC: 2 | RNVC: 2
5161-233110B01B: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-197-7977
Clamping Catch

121977977
7800191200: RNCC: 3 | RNVC: 2
5801807-13000: RNCC: 5 | RNVC: 2
5801807-13000: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-190-7217
Detent Plunger

121907217
NO PRIMARY REF 12-190-7217: RNCC: 3 | RNVC: 2
25-90364-00: RNCC: 5 | RNVC: 9
25/90364.00: RNCC: 5 | RNVC: 9
7801 590364: RNCC: 5 | RNVC: 9
7801590364: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-341-8463
Mounting Bracket

123418463
11.07343-0013: RNCC: 3 | RNVC: 2
11.07343-0013: RNCC: 5 | RNVC: 2
11.07343-0013: RNCC: 5 | RNVC: 2
11.07343-0013: RNCC: 5 | RNVC: 2
E11.07343-0013: RNCC: 5 | RNVC: 2

1 Nov 1996

5340-12-309-5011
Luggage Lock

123095011
NO PRIMARY REF 12-309-5011: RNCC: 3 | RNVC: 2
2104: RNCC: 5 | RNVC: 9

29 Jan 1987

5340-12-701-8470
Loop Clamp

127018470
VG95211-ML-127018470: RNCC: 2 | RNVC: 2
5156A-22: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-162-8136
Mending Plate

121628136
100356-211000-03: RNCC: 2 | RNVC: 2
100356-211000-03: RNCC: 5 | RNVC: 2
100356-211000.03: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-3210
Loop Clamp

121763210
PAN4264-22: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-350-2960
Shimmy Damper

123502960
SVC-003-01: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-12-349-7817
Nonmetallic Bumper

123497817
U60.221400.07-00: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-373-2436
Hinge Torsion Bar

123732436
060301/7323-31-10-08: RNCC: 3 | RNVC: 2
625914: RNCC: 5 | RNVC: 2

12 Oct 2007

5340-12-311-2722
Mending Plate

123112722
1920947: RNCC: 3 | RNVC: 2
5303.016.00.06.000: RNCC: 5 | RNVC: 2
5303.016.00.06/000: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-331-4696
Turnbuckle

123314696
PH 120010: RNCC: 3 | RNVC: 2
AL/146: RNCC: 5 | RNVC: 2

7 May 1993

5340-12-172-0620
Retaining Strap

121720620
1000078-110000-04: RNCC: 2 | RNVC: 2
1000078-110000-04: RNCC: 5 | RNVC: 2
1000078-110000-04: RNCC: 5 | RNVC: 9
1000078-110000.04: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-199-4194
Metal Runner

121994194
2300088-310646.03: RNCC: 2 | RNVC: 2
2300088-310646-03: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-164-5739
Catch Strike

121645739
730024-20.7: RNCC: 2 | RNVC: 2
730024-20-7: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-338-3424
Multiple Angle Bracket

123383424
1853601: RNCC: 3 | RNVC: 2
EZ18536: RNCC: 5 | RNVC: 2

26 Jun 1995

5340-12-302-4847
Resilient Mount

123024847
1154104481: RNCC: 3 | RNVC: 2

7 Jan 1985

5340-12-336-6351
Angle Bracket

123366351
272.381.035: RNCC: 3 | RNVC: 2
272.381 035: RNCC: 5 | RNVC: 9
272.381035: RNCC: 5 | RNVC: 9

5 Dec 1994

5340-12-318-4520
Access Cover

123184520
9522006504: RNCC: 3 | RNVC: 2
9522006504: RNCC: 5 | RNVC: 2

17 Jul 1989

5340-12-145-8208
Butt Hinge Leaf

121458208
1200: RNCC: 3 | RNVC: 9
1200: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-7632
Dust And Moisture Seal Protective Cap

121987632
321601173A: RNCC: 3 | RNVC: 9

23 Feb 1984

5340-12-321-2537
Double Angle Bracket

123212537
0223 9964: RNCC: 3 | RNVC: 2
02239964KZ0150-39: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-12-322-5086

5340-12-325-6237
Rim Lock

123256237
CF 429 422 -E: RNCC: 3 | RNVC: 2
CF 429 422 -E: RNCC: 5 | RNVC: 2

24 Jun 1991

Load More Results