What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 68 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 68 of 178

5340-12-306-5762
Dust And Moisture Seal Protective Cap

123065762
81964100333: RNCC: 3 | RNVC: 2

12 Mar 1986

5340-12-321-7832
Access Cover

123217832
54.2544.060.03: RNCC: 2 | RNVC: 2
54.2544.060.03: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-12-182-6611
Helical Compression Spring Seat

121826611
6360530325: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-12-312-0140
Angle Bracket

123120140
81415015342: RNCC: 3 | RNVC: 2
81.41501.5342: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-333-6393
Nonmetallic Bumper

123336393
1H0823499: RNCC: 3 | RNVC: 9

17 Jan 1994

5340-12-303-5724
Nonmetallic Bumper

123035724
538.00-3364.4: RNCC: 3 | RNVC: 2

9 Apr 1985

5340-12-153-8303
Nut And Bolt Locking Plate

121538303
100355-460000.03: RNCC: 2 | RNVC: 2
100355-460000.03: RNCC: 3 | RNVC: 2
100355-460000-03: RNCC: 5 | RNVC: 2
100355-460000-03: RNCC: 5 | RNVC: 9
100355-460000-03: RNCC: 5 | RNVC: 9
100355-460000.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-367-9744
Access Cover

123679744
54.1094.710.01: RNCC: 3 | RNVC: 2

14 Nov 2005

5340-12-353-4171
Door Button

123534171
FT2749.000: RNCC: 3 | RNVC: 2
FT2749: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-12-095-0086

5340-12-322-4050
Butt Hinge

123224050
076-320022-904-0: RNCC: 2 | RNVC: 2
076-320022-904-0: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-12-307-2435
Sealing Plug Assembly

123072435
140-323000-901-0: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-388-1832
Section Block Clamp

123881832
1030105-206200.002.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-351-9128
Mounting Plate

123519128
113G08009: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-12-351-8998
Support Hook

123518998
3142230141: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-355-4868
Mounting Bracket

123554868
4615041140: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-352-2800
Mechanic Equipment Hardware Kit

123522800
8500996: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-12-371-2523
Section Block Clamp

123712523
JN0413GH48: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-12-373-1523
Dust And Moisture Seal Protective Plug

123731523
93192919: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-12-327-2012
Extension Drawer Slide

123272012
BD9102E372: RNCC: 3 | RNVC: 2
BD9102E372: RNCC: 5 | RNVC: 9

16 Dec 1991

5340-12-369-4033
Runner

123694033
3041000: RNCC: 3 | RNVC: 2
3041.000: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-358-6962
Dust And Moisture Seal Protective Cover

123586962
2481-392873.000.0: RNCC: 2 | RNVC: 2
2481-392873.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-300-8731
Angle Bracket

123008731
1420-200.08(4): RNCC: 3 | RNVC: 2

6 Sep 1984

5340-12-362-6646
Mounting Plate

123626646
2500262-394300.030.0: RNCC: 2 | RNVC: 2
2500262-394300.030.0: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-701-2974
Mounting Plate

127012974
5.12.5101.4717.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-334-3171
Dust And Moisture Seal Protective Cap

123343171
105-80411.04: RNCC: 3 | RNVC: 2
105-80411-04: RNCC: 5 | RNVC: 2

26 Apr 1994

5340-12-197-5266
Retaining Strap

121975266
23110-3700.16: RNCC: 2 | RNVC: 2
23110-3700.16: RNCC: 3 | RNVC: 2
23110-3700-16: RNCC: 5 | RNVC: 9
23110-3700.16: RNCC: 5 | RNVC: 9
23110-3700-16: RNCC: 5 | RNVC: 9
23110-3700.16: RNCC: 5 | RNVC: 9

28 Oct 1983

5340-12-327-5860
Catch Strike

123275860
5802291-20800.01: RNCC: 2 | RNVC: 2
4840451-20800.01: RNCC: 3 | RNVC: 2
5802291-20800.01: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-12-702-9376
Dust And Moisture Seal Protective Cap

127029376
VG95211-ML-127029376: RNCC: 2 | RNVC: 2
5660A-M18X1: RNCC: 3 | RNVC: 2
0500840346789: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-366-6517
Mounting Bracket

123666517
388262277: RNCC: 3 | RNVC: 2
0004-826.22.00.000-001: RNCC: 5 | RNVC: 2

19 May 2005

5340-12-304-9768
Fusible Plug

123049768
360-16131REP40: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-12-393-8191
Spacing Threaded Standoff

123938191
2300570-262000.09.0: RNCC: 2 | RNVC: 2
2300570-262000.09.0: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-364-4840
Clamping Catch

123644840
604-MM: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-197-2642
Double Angle Bracket

121972642
08813: RNCC: 3 | RNVC: 2
08813: RNCC: 5 | RNVC: 9

5 Oct 1983

5340-12-358-8188
Mounting Bracket

123588188
DFAM003: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-393-5082
Angle Bracket

123935082
6205243040: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-041-9781

5340-12-380-4840
Bumper

123804840
38652: RNCC: 3 | RNVC: 2
3915250000: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-12-131-5494

5340-12-172-8680
Dust And Moisture Seal Protective Plug

121728680
2013410: RNCC: 3 | RNVC: 2
1-414006: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-389-0721
Expansion Shield

123890721
NO PRIMARY REF 12-389-0721: RNCC: 3 | RNVC: 2
2500601536: RNCC: 5 | RNVC: 2
050262: RNCC: 5 | RNVC: 2
060262: RNCC: 5 | RNVC: 2

24 May 2012

5340-12-357-5141
Access Cover

123575141
342.30.610: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-315-1875
Resilient Mount

123151875
6172400418: RNCC: 3 | RNVC: 2
617 240 04 18: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-010-2343

5340-12-313-5539
Dust And Moisture Seal Protective Plug

123135539
IS09: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-093-7616

5340-12-302-8396
Nonmetallic Solid Wheel

123028396
1000128-2000.04: RNCC: 2 | RNVC: 2
49.008.20000.04E: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-346-6314
Surface Bolt

123466314
53.1622.509.10: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-12-042-3212

5340-12-701-6038
Mounting Bracket

127016038
VG95211-ML-127016038: RNCC: 2 | RNVC: 2
5.12.6602.0020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-6073
Mounting Bracket

123176073
C72165-A421-B210: RNCC: 3 | RNVC: 2

21 Apr 1989

5340-12-300-2169
Retaining Strap

123002169
24114-2846.00: RNCC: 2 | RNVC: 2
23114-2846.00: RNCC: 3 | RNVC: 2
23114-2846-00: RNCC: 5 | RNVC: 9
23114-2846.00: RNCC: 5 | RNVC: 9
23114-2846-00: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-155-4505
Support Hook

121554505
VG95211-ML-121554505: RNCC: 2 | RNVC: 2
160-75550: RNCC: 3 | RNVC: 2
160-74378-32: RNCC: 5 | RNVC: 2
160-75550: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-0440
Retaining Strap

121900440
F1143386-0039: RNCC: 3 | RNVC: 2
F11.43386-0039: RNCC: 5 | RNVC: 2
F11.43386-0039: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-171-9252
Dust And Moisture Seal Protective Cap

121719252
197.268: RNCC: 3 | RNVC: 2
0502579: RNCC: 5 | RNVC: 2
7000336: RNCC: 5 | RNVC: 2
0008241799: RNCC: 5 | RNVC: 2
01244473: RNCC: 5 | RNVC: 2
1244473EZ8928-70: RNCC: 5 | RNVC: 2
197268: RNCC: 5 | RNVC: 2
7000336: RNCC: 5 | RNVC: 2
502579: RNCC: 5 | RNVC: 9

29 Nov 1977

5340-12-323-8520
Butt Hinge Leaf

123238520
105-21401.100.07: RNCC: 3 | RNVC: 2
105-21401-100.07: RNCC: 5 | RNVC: 2

27 Dec 1990

5340-12-182-1194
Bail Handle

121821194
4582939: RNCC: 3 | RNVC: 2
5801505-209200-001: RNCC: 5 | RNVC: 2
5801505-209200.001: RNCC: 5 | RNVC: 9
5801505-209200-001: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-702-5985
Loop Clamp

127025985
VG95211-ML-127025985: RNCC: 2 | RNVC: 2
5148A-42: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-3722
Loop Clamp

123073722
SP8778.106/20SKZ: RNCC: 3 | RNVC: 2
1518778106: RNCC: 5 | RNVC: 2
40029000: RNCC: 5 | RNVC: 2
01518778106: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-193-2244
Suction Cup

121932244
143.00-03-01-01-000: RNCC: 3 | RNVC: 2

1 Jul 1982

5340-12-342-4396
Loop Clamp

123424396
PAN4263-38: RNCC: 3 | RNVC: 2

12 Feb 1997

5340-12-356-1715
Block Clamp

123561715
J29120250-001: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-192-4685
Clamping Catch

121924685
20L06-2-1AA: RNCC: 3 | RNVC: 2

27 Apr 1982

5340-12-301-5075
Mending Plate

123015075
1300062-110000.02: RNCC: 2 | RNVC: 2
7834631: RNCC: 3 | RNVC: 2
1300062-110000.02: RNCC: 5 | RNVC: 2
4-7834-631: RNCC: 5 | RNVC: 2
7834-631: RNCC: 5 | RNVC: 2

20 Oct 1984

5340-12-321-9437
Metal Runner

123219437
702-241800-903-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-346-6844
Mounting Plate

123466844
23176-220000.11.0: RNCC: 3 | RNVC: 2
23176-220000-11-0: RNCC: 5 | RNVC: 9
23176-220000.11.0: RNCC: 5 | RNVC: 9

25 Aug 1998

5340-12-132-5608
Resilient Mount

121325608
2300109-060000.034.0: RNCC: 2 | RNVC: 2
781040S1-60 SHORE A: RNCC: 3 | RNVC: 2
781040S1MITTEL: RNCC: 5 | RNVC: 2
500019-M6X11.NR55.ST: RNCC: 5 | RNVC: 2
2300109-060000.034.0: RNCC: 5 | RNVC: 2
DIN95363-A18X8,5-M6X11-NR55ST: RNCC: 5 | RNVC: 2
2300109-060000.034.0: RNCC: 5 | RNVC: 2
2300109-060000.034.0: RNCC: 5 | RNVC: 9
VG95363-A18X8,5-M6X11-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-341-1129
Lock-Release Lever

123411129
050358: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-12-306-8280
Retaining Strap

123068280
1003372: RNCC: 3 | RNVC: 2
5VC4845: RNCC: 5 | RNVC: 2
5VC4845: RNCC: 5 | RNVC: 2

8 Apr 1986

5340-12-337-4415
Key Blank

123374415
0009880459: RNCC: 3 | RNVC: 2
1024: RNCC: 5 | RNVC: 2

6 Mar 1995

5340-12-355-1503
Mounting Plate

123551503
1032576: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-198-1909
Helical Compression Spring Retainer

121981909
1420328002: RNCC: 3 | RNVC: 2
1420328002: RNCC: 5 | RNVC: 2
VDPM00700: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-011-4393

5340-12-197-8185
Corner Brace

121978185
2493301: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-12-010-8244

5340-12-094-0936

5340-12-376-5797
Flush Lock

123765797
1000-U47: RNCC: 3 | RNVC: 2

20 Oct 2008

5340-12-383-8866
Mounting Bracket

123838866
1556364: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-311-0711
Retaining Band

123110711
02102279KZ0150-21: RNCC: 3 | RNVC: 2

23 Jul 1987

5340-12-316-1521
Retaining Clip

123161521
3812540113: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-310-2552
Rod Retainer Clip

123102552
0501 310 064: RNCC: 3 | RNVC: 2
81.90801.0306: RNCC: 3 | RNVC: 2
81908010306: RNCC: 5 | RNVC: 2
0501310064: RNCC: 5 | RNVC: 2

28 Apr 1987

5340-12-332-8194
Mounting Plate

123328194
0620121: RNCC: 3 | RNVC: 2
0620121: RNCC: 5 | RNVC: 9

23 Sep 1993

5340-12-163-9811

5340-12-363-5799
Double Angle Bracket

123635799
0241 9672: RNCC: 3 | RNVC: 2
571301177: RNCC: 5 | RNVC: 2

6 Jul 2004

5340-12-319-1120
Friction Catch Stud

123191120
2654-332221.00: RNCC: 2 | RNVC: 2
2654-332221.00: RNCC: 3 | RNVC: 2
679-02011101: RNCC: 5 | RNVC: 9
2654-332 221.00: RNCC: 5 | RNVC: 9
679-02011101: RNCC: 5 | RNVC: 9

8 Sep 1989

5340-12-173-9609
Angle Bracket

121739609
4325000504: RNCC: 3 | RNVC: 2
81.51270-0006: RNCC: 5 | RNVC: 2
81512700006: RNCC: 5 | RNVC: 2
0047827: RNCC: 5 | RNVC: 2
1692-270: RNCC: 5 | RNVC: 2
1692270: RNCC: 5 | RNVC: 2

26 May 1978

5340-12-179-5469
Mounting Bracket

121795469
C121-A35-C2: RNCC: 2 | RNVC: 2
C121A35C2: RNCC: 3 | RNVC: 2
C121A35C2: RNCC: 5 | RNVC: 2
C121-A35-C2: RNCC: 5 | RNVC: 2
C121-A35-C2: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-701-2179
Mounting Plate

127012179
VG95211-ML-127012179: RNCC: 2 | RNVC: 2
5.12.0605.0592.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-7073
Handle Grip

123137073
2.04.001.03.01: RNCC: 3 | RNVC: 2
2730-2370-00: RNCC: 5 | RNVC: 2

27 Apr 1988

5340-12-180-6342
Mending Plate

121806342
C320-A62-C29: RNCC: 2 | RNVC: 2
C320A62C29: RNCC: 3 | RNVC: 2
C320A62C29: RNCC: 5 | RNVC: 2
C320-A62-C29: RNCC: 5 | RNVC: 2
C320-A62-C29: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-189-6842
Resilient Mount

121896842
2K2-BAM-90: RNCC: 3 | RNVC: 2
2K2-BAM-90: RNCC: 5 | RNVC: 9
2K2BAM90: RNCC: 5 | RNVC: 9

12 Oct 1981

5340-12-196-5929
Lock-Release Lever

121965929
C22136-A1000-C38: RNCC: 3 | RNVC: 2
C22136A1000C38: RNCC: 5 | RNVC: 2

20 Jul 1983

5340-12-310-9035
Shock Mount Pad

123109035
4.73026/3: RNCC: 3 | RNVC: 2
81.25232.0030: RNCC: 5 | RNVC: 2

7 Jul 1987

5340-12-195-0168
Escutcheon Plate

121950168
5577109: RNCC: 3 | RNVC: 2
557.7109: RNCC: 5 | RNVC: 2

30 Dec 1982

5340-12-176-2585
Catch Strike

121762585
183885635: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-374-3107
Section Block Clamp

123743107
5324316: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-325-2303
Webbing Strap

123252303
7233801: RNCC: 3 | RNVC: 2

17 May 1991

5340-12-337-9943
Mounting Bracket

123379943
7174601: RNCC: 3 | RNVC: 2

9 May 1995

5340-12-357-6932
Quick Release Plunger

123576932
2205708: RNCC: 3 | RNVC: 2
2205.708: RNCC: 5 | RNVC: 2
EH2205.708: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-316-3045
Access Cover

123163045
125260: RNCC: 2 | RNVC: 2
125260: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-326-4377
Retaining Band

123264377
3964700040: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-316-2361
Pipe Bracket

123162361
8381594540: RNCC: 3 | RNVC: 2

3 Jan 1989

5340-12-302-9546
Mending Plate

123029546
70568: RNCC: 3 | RNVC: 2

12 Feb 1985

5340-12-311-8690
Angle Bracket

123118690
2300074-5523.00: RNCC: 2 | RNVC: 2
2300074-5523.00: RNCC: 5 | RNVC: 2
2300074-5523.00: RNCC: 5 | RNVC: 9

26 Oct 1987

5340-12-320-5495
Nonmetallic Bumper

123205495
5801411-690572.002: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-12-316-2947
Shimmy Damper

123162947
5186305: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-308-7417
Double Angle Bracket

123087417
03440011: RNCC: 3 | RNVC: 2

12 Nov 1986

5340-12-316-9991
Electrical-Mechanical Equipment Post

123169991
2300279-4015.00: RNCC: 2 | RNVC: 2
2300279-4015.00: RNCC: 3 | RNVC: 2
2300279-4015.00: RNCC: 5 | RNVC: 9
9873050: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-356-7492
Helical Compression Spring Retainer

123567492
114306638: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-026-8316

5340-12-146-8760

5340-12-305-9179
Electrical-Mechanical Equipment Post

123059179
54.0042.020.02: RNCC: 3 | RNVC: 2

7 Jan 1986

5340-12-338-4419
Double Angle Bracket

123384419
81381400008: RNCC: 3 | RNVC: 2
4130 306 228: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-12-026-9632

5340-12-379-6319
Retaining Band

123796319
0233100400: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-388-7898
Mounting Bracket

123887898
10199-183000.001.0: RNCC: 2 | RNVC: 2
10199-183000.001.0: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-335-6526
Nonmetallic Bumper

123356526
5 645 387: RNCC: 3 | RNVC: 2

8 Sep 1994

5340-12-193-3083
Pad Eye

121933083
4608260114: RNCC: 3 | RNVC: 2
721 1 85 225 1: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-390-2883
Mounting Bracket

123902883
120D256054.000.0: RNCC: 2 | RNVC: 2
120D256054.000.0: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-345-7545
Mounting Plate

123457545
AH30660G01: RNCC: 3 | RNVC: 2
AH30118P01: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-12-315-9622
Line Supporting Strap

123159622
8HL707877-03: RNCC: 3 | RNVC: 9

9 Dec 1988

5340-12-159-8652
Expansion Plug

121598652
100332-10410.25: RNCC: 2 | RNVC: 2
100332-10410-25: RNCC: 5 | RNVC: 2
100332-10410.25: RNCC: 5 | RNVC: 2
100332-10410-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-9125
Loop Clamp

121789125
5561857/4: RNCC: 3 | RNVC: 2
5561857-4: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-322-9582
Electrical-Mechanical Equipment Post

123229582
VG95148C11XM6X40-ST: RNCC: 2 | RNVC: 2
VG95148C11XM6X40-ST: RNCC: 3 | RNVC: 2
N5-44-6X40-8: RNCC: 3 | RNVC: 2
10 322 945: RNCC: 5 | RNVC: 2

11 Oct 1990

5340-12-314-2330
Loop Clamp

123142330
DIN71555-94,5 LACK BIS 500GRAD C: RNCC: 2 | RNVC: 2
071555094501: RNCC: 3 | RNVC: 2

17 Jun 1988

5340-12-390-1430
Sliding Door Track

123901430
2300559-184100.000.0: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-12-321-7053
Metal Runner

123217053
702-147900-901-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-310-5139
Resilient Mount

123105139
RH-1A: RNCC: 3 | RNVC: 2
1019117: RNCC: 5 | RNVC: 2

27 May 1987

5340-12-317-9432
Dust And Moisture Seal Protective Cap

123179432
GPN800/1 5/16"-12UNF: RNCC: 3 | RNVC: 2
800/1 5/16"-12UNF: RNCC: 5 | RNVC: 2
GPN800,1 5/16IN-12UNF: RNCC: 5 | RNVC: 2

29 May 1989

5340-12-194-2089
Electrical-Mechanical Equipment Post

121942089
RP988507: RNCC: 3 | RNVC: 2

12 Oct 1982

5340-12-374-9365
Dust And Moisture Seal Protective Cap-Plug

123749365
279.657 687: RNCC: 2 | RNVC: 2
279.657 687: RNCC: 3 | RNVC: 2

8 Apr 2008

5340-12-171-4051
Angle Bracket

121714051
02331: RNCC: 3 | RNVC: 2
02331: RNCC: 5 | RNVC: 9

7 Oct 1977

5340-12-043-2237

5340-12-375-2104
Support Hook

123752104
L243M3810217: RNCC: 3 | RNVC: 2

5 May 2008

5340-12-197-4220
Dust And Moisture Seal Protective Plug

121974220
3099870115: RNCC: 3 | RNVC: 2

20 Oct 1983

5340-12-330-6232
Headless Straight Rod

123306232
1361016-17012.01: RNCC: 3 | RNVC: 2

19 Jan 1993

5340-12-321-6526
Double Angle Bracket

123216526
295426: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-319-8065
Bow Handle

123198065
CF 832 113 AE: RNCC: 2 | RNVC: 2
CF 832 113 AE: RNCC: 3 | RNVC: 2
CF 832 113 AE: RNCC: 5 | RNVC: 2

7 Nov 1989

5340-12-022-7003

5340-12-338-8867
Mending Plate

123388867
4900319-601000.22: RNCC: 2 | RNVC: 2
4900319-601000.22: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-344-0416
Retaining Strap

123440416
2996.73.30: RNCC: 3 | RNVC: 2
2996.7330: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-381-7871
Plug Button

123817871
059023020: RNCC: 3 | RNVC: 2
29010715: RNCC: 5 | RNVC: 2

31 Mar 2010

5340-12-197-5165
Handrail Bracket

121975165
2545G-ALBEL: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-154-9537
Clamping Catch

121549537
KAF20311: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-354-1935
Loop Clamp

123541935
PAN4231DDDD6220: RNCC: 3 | RNVC: 2

19 Jun 2001

5340-12-308-7416
Bow Handle

123087416
86002335: RNCC: 3 | RNVC: 2

12 Nov 1986

5340-12-027-7129

5340-12-173-0888
Double Angle Bracket

121730888
4254760636: RNCC: 3 | RNVC: 2

20 Mar 1978

5340-12-333-8991
Angle Bracket

123338991
3524920441: RNCC: 3 | RNVC: 2
3524925219: RNCC: 5 | RNVC: 9

22 Feb 1994

5340-12-326-9137
Mechanic Equipment Hardware Kit

123269137
2500171-454000.00: RNCC: 2 | RNVC: 2
2500171-454000.00: RNCC: 3 | RNVC: 2

8 Nov 1991

5340-12-370-8717
Webbing Strap

123708717
01-300 02502: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-12-091-4886

5340-12-310-9965
Loop Clamp

123109965
42.16.001: RNCC: 3 | RNVC: 2
2211410015: RNCC: 5 | RNVC: 2
22114 10015: RNCC: 5 | RNVC: 9

16 Jul 1987

5340-12-043-2694

5340-12-393-3077
Loop Clamp

123933077
054927090: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-344-1520
Loop Clamp

123441520
3660780286: RNCC: 3 | RNVC: 2

18 Sep 1997

5340-12-392-6000
Access Door Hinge

123926000
362.01.500: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-127-4361

5340-12-322-5880
Kunst Gleitschiene

123225880
0786306: RNCC: 3 | RNVC: 2
0786306: RNCC: 5 | RNVC: 9

4 Sep 1990

5340-12-368-5503
Strap Fastener Loop

123685503
103392: RNCC: 3 | RNVC: 2
55027: RNCC: 5 | RNVC: 2

23 Mar 2006

5340-12-178-2254
Dust And Moisture Seal Protective Plug

121782254
8995053904: RNCC: 3 | RNVC: 2
1405211: RNCC: 5 | RNVC: 2
1692836: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-150-2039
Electrical-Mechanical Equipment Post

121502039
GR36TZ67: RNCC: 3 | RNVC: 9
GR0036G067: RNCC: 5 | RNVC: 2
GR0036G067: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-9492
Access Cover

123199492
54.2248.300.35: RNCC: 3 | RNVC: 2

21 Nov 1989

5340-12-359-8313
Pawl Fastener

123598313
2500262-970641.002.0: RNCC: 2 | RNVC: 2
2500262-970641.002.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-306-4366
Bow Handle

123064366
10223 1 124: RNCC: 3 | RNVC: 2
102231214: RNCC: 5 | RNVC: 2
10223 1 124: RNCC: 5 | RNVC: 9
102231214: RNCC: 5 | RNVC: 9

28 Feb 1986

5340-12-325-3992
Dust And Moisture Seal Protective Cap

123253992
525315098: RNCC: 3 | RNVC: 2
52 531 5098: RNCC: 5 | RNVC: 2

3 Jun 1991

5340-12-386-4672
Cushioning Pad

123864672
009-221.475-009: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-330-0833
Dust And Moisture Seal Protective Plug

123300833
600B439: RNCC: 3 | RNVC: 2
GPN600B439: RNCC: 5 | RNVC: 2
GPN600-B439: RNCC: 5 | RNVC: 9
GPN600/B439: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-12-305-1958
Angle Bracket

123051958
5801763-100000.001: RNCC: 2 | RNVC: 2
5801763-100000.001: RNCC: 3 | RNVC: 2
5801763-100000.001: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-328-2893
Extension Drawer Slide

123282893
40404-018: RNCC: 2 | RNVC: 2
40404-018: RNCC: 3 | RNVC: 2
40404-018: RNCC: 5 | RNVC: 9

5 May 1992

5340-12-198-5392
Retaining Strap

121985392
160-744442-30: RNCC: 3 | RNVC: 2
160-744442-30: RNCC: 5 | RNVC: 9

7 Feb 1984

5340-12-140-6799
Retaining Band

121406799
R17697: RNCC: 3 | RNVC: 2
2260919: RNCC: 3 | RNVC: 2
2260-919: RNCC: 5 | RNVC: 2
R17697: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-3656
Rod End Clevis

121903656
DK50-71: RNCC: 3 | RNVC: 2
1692-992: RNCC: 5 | RNVC: 2
1692992: RNCC: 5 | RNVC: 2
8461546: RNCC: 5 | RNVC: 2

24 Nov 1981

5340-12-186-6518
Retaining Clip

121866518
C22136-A1000-C91: RNCC: 3 | RNVC: 2
C22136A1000C91: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-308-9099
Nonmetallic Bumper

123089099
1281-64610.05: RNCC: 2 | RNVC: 2
160185: RNCC: 3 | RNVC: 2
1281-64610.05: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-319-8421
Butt Hinge

123198421
4900288-021500.02: RNCC: 2 | RNVC: 2
4312 712 41760: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-701-8022
Mounting Bracket

127018022
VG95211-ML-127018022: RNCC: 2 | RNVC: 2
5.12.8102.8008.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-156-8897
Cremone Bolt

121568897
NO PRIMARY REF 12-156-8897: RNCC: 3 | RNVC: 2
1-6899-15-2-6727-5ITEMB: RNCC: 5 | RNVC: 9
15-2-6727-5B: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-2765
Angle Bracket

121962765
P-231225-404: RNCC: 3 | RNVC: 2
P231225-404: RNCC: 5 | RNVC: 2

22 Jun 1983

5340-12-363-9935
Retaining Strap

123639935
700325018200: RNCC: 3 | RNVC: 2
1/1G8-18MMN325: RNCC: 5 | RNVC: 2

10 Aug 2004

5340-12-180-8851
Angle Bracket

121808851
2500035-131000.00: RNCC: 2 | RNVC: 2
2500035-131000-00: RNCC: 5 | RNVC: 2
2500035-131000-00: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-702-0053
Loop Clamp

127020053
VG95211-ML-127020053: RNCC: 2 | RNVC: 2
1729S-52.26T: RNCC: 3 | RNVC: 2
1729S-52-26-T: RNCC: 5 | RNVC: 2

6 Apr 1995

5340-12-701-5680
Retaining Band

127015680
VG95211-ML-127015680: RNCC: 2 | RNVC: 2
5.12.6149.0020.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7299
Loop Clamp

127017299
VG95211-ML-127017299: RNCC: 2 | RNVC: 2
5.12.7607.8060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-4989
Dust And Moisture Seal Protective Plug

127004989
VG95211-ML-127004989: RNCC: 2 | RNVC: 2
155N-619-6: RNCC: 3 | RNVC: 2
0500800050609: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-314-2834
Angle Bracket

123142834
P-856650-003: RNCC: 3 | RNVC: 2
P856650-003: RNCC: 5 | RNVC: 2

23 Jun 1988

5340-12-175-8549
Electrical-Mechanical Equipment Post

121758549
VG95148C10XM6X25-ST: RNCC: 2 | RNVC: 2
5.16.251: RNCC: 3 | RNVC: 2
5.16.254: RNCC: 3 | RNVC: 2
VG95148C10XM6X25-ST: RNCC: 3 | RNVC: 2
51904410041: RNCC: 3 | RNVC: 2
0745310013: RNCC: 5 | RNVC: 2
602-109: RNCC: 5 | RNVC: 9

23 Oct 1978

5340-12-358-4233
Access Cover

123584233
2500262-190230.000.0: RNCC: 2 | RNVC: 2
2500262-190230.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-391-9998
Loop Clamp

123919998
DIN3016-1-D2-23-23X20-W5-CR: RNCC: 2 | RNVC: 2

24 Apr 2013

5340-12-192-6141
Mending Plate

121926141
020208-611000.02: RNCC: 2 | RNVC: 2
020208-611000.02: RNCC: 3 | RNVC: 2
07-26-14-0: RNCC: 5 | RNVC: 9

10 May 1982

5340-12-171-4607
Resilient Mount

121714607
2360-031500.00.0: RNCC: 2 | RNVC: 2
2360-031500.00.0: RNCC: 3 | RNVC: 2
2360-031500.00.0: RNCC: 5 | RNVC: 2
845-2360-031500.00.0: RNCC: 5 | RNVC: 2
2360-031500.00.0: RNCC: 5 | RNVC: 2
2360-031500-00-0: RNCC: 5 | RNVC: 9
2360-031500-00-0: RNCC: 5 | RNVC: 9
2360-031500.00.0: RNCC: 5 | RNVC: 9

13 Oct 1977

5340-12-702-4581
Mounting Bracket

127024581
VG95211-ML-127024581: RNCC: 2 | RNVC: 2
5.51.0603.0014.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-148-9657
Loop Clamp

121489657
DIN3016-1-A1-19X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-19X20-W1-2: RNCC: 3 | RNVC: 2
RS1.19/20: RNCC: 3 | RNVC: 2
RS1100-19-20: RNCC: 5 | RNVC: 2
23176-208000-96-0: RNCC: 5 | RNVC: 2
4110020019: RNCC: 5 | RNVC: 2
RS1100.19/20: RNCC: 5 | RNVC: 2
VG95931-A19X20-W1: RNCC: 5 | RNVC: 9
VG95931A19X20W1: RNCC: 5 | RNVC: 9
DIN3016-A1-19X20-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-6787
Butt Hinge

121886787
A-245875-001: RNCC: 3 | RNVC: 2
A245875-001: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-369-1020
Flush Lock

123691020
YN 171- 2036K - 1: RNCC: 3 | RNVC: 2

22 May 2006

5340-12-199-6094
Electrical-Mechanical Equipment Post

121996094
3422028733: RNCC: 3 | RNVC: 2
5801944-2000-001: RNCC: 5 | RNVC: 2
5801944-2000.001: RNCC: 5 | RNVC: 9

16 May 1984

5340-12-188-1329
Angle Bracket

121881329
81974860769: RNCC: 3 | RNVC: 2
81.97486-0769: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-12-183-6328
Pipe Bracket

121836328
2300034-180211: RNCC: 2 | RNVC: 2
42018260: RNCC: 5 | RNVC: 2
42018260KZ5007-59: RNCC: 5 | RNVC: 2
2300034-180211: RNCC: 5 | RNVC: 9

6 May 1980

5340-12-301-2021
Double Angle Bracket

123012021
A-295140-003: RNCC: 3 | RNVC: 2
A295140-003: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-199-2289
Rod End Connector

121992289
P-896358-007: RNCC: 3 | RNVC: 2
P896358-007: RNCC: 5 | RNVC: 2

5 Apr 1984

5340-12-306-0807
Mending Plate

123060807
P-243852-010: RNCC: 3 | RNVC: 2
P243852-010: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-371-3060
Mounting Bracket

123713060
8390-0025: RNCC: 2 | RNVC: 2
8390-0025: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-188-2444
Helical Compression Spring Retainer

121882444
9236-803-000-01: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-12-146-6148
Spring Tension Clip

121466148
23110-1801.25: RNCC: 2 | RNVC: 2
23110-1801.25: RNCC: 3 | RNVC: 2
23110-1801-25: RNCC: 5 | RNVC: 2
23110-1801-25: RNCC: 5 | RNVC: 9
23110-1801-25: RNCC: 5 | RNVC: 9
23110-1801.25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-020-7418

5340-12-194-4144
Access Door

121944144
66.3505.323.00-A001: RNCC: 3 | RNVC: 2
597974: RNCC: 5 | RNVC: 2

3 Nov 1982

5340-12-321-6473
Angle Bracket

123216473
2300034-230330.07: RNCC: 2 | RNVC: 2

12 Jun 1990

5340-12-340-5469
Mounting Bracket

123405469
5900940041: RNCC: 3 | RNVC: 2
5900940041: RNCC: 5 | RNVC: 2
5900940041: RNCC: 5 | RNVC: 2
590 094 00 41: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-301-7695
Nonmetallic Bumper

123017695
4179164: RNCC: 3 | RNVC: 2
S12B.K05.00.00.016: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-044-5818

5340-12-094-6262

5340-12-379-8951
Nut And Bolt Head Protective Cap

123798951
06510317: RNCC: 3 | RNVC: 2
CV168966: RNCC: 5 | RNVC: 2
06510317: RNCC: 5 | RNVC: 2

10 Sep 2009

5340-12-303-4374
Catch Strike

123034374
1157200604: RNCC: 3 | RNVC: 2

22 Mar 1985

5340-12-325-3434
Angle Bracket

123253434
020111082: RNCC: 3 | RNVC: 2
020111080: RNCC: 5 | RNVC: 9

28 May 1991

5340-12-378-3612
Double Angle Bracket

123783612
051 022 030 000: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-357-9722
Mounting Bracket

123579722
2300458-971301.000: RNCC: 2 | RNVC: 2
2300458-971301.000: RNCC: 3 | RNVC: 2

22 Aug 2002

5340-12-094-4137

5340-12-344-7070
Spring Tension Clip

123447070
4SXN62B2WHITE: RNCC: 3 | RNVC: 2

1 Dec 1997

5340-12-325-0896
Mounting Bracket

123250896
5795U: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-316-1547
Loop Clamp

123161547
3874920240: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-316-6906
Mounting Bracket

123166906
51-53202: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-358-9591
Nonmetallic Bumper

123589591
417006: RNCC: 3 | RNVC: 2
0006370196: RNCC: 5 | RNVC: 2

3 Dec 2002

5340-12-301-8940
Bridge Clamp

123018940
2989120489: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-026-4209

5340-12-315-3485
Angle Bracket

123153485
RP988952: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-390-0586
Spacing Threaded Standoff

123900586
CF 493 213 B: RNCC: 3 | RNVC: 2
CF 493 213 B: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-169-2029
Mending Plate

121692029
WW410609B: RNCC: 3 | RNVC: 2
WW410609A: RNCC: 5 | RNVC: 2
WW 410 609 A: RNCC: 5 | RNVC: 2
WW 410 609 B: RNCC: 5 | RNVC: 2
WW410609A: RNCC: 5 | RNVC: 2
WW410609B: RNCC: 5 | RNVC: 2
WW410609A: RNCC: 5 | RNVC: 2
WW410609B: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-346-6673
Webbing Strap

123466673
23111-4623.00: RNCC: 2 | RNVC: 2
23111-4623.00: RNCC: 3 | RNVC: 2
23111-4623.00: RNCC: 5 | RNVC: 9

24 Aug 1998

5340-12-357-6106
Nonmetallic Bumper

123576106
CBD45331P11: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-387-8481
Mounting Bracket

123878481
7093723: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-300-8464
Angle Bracket

123008464
4253130142: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-360-2753
Angle Bracket

123602753
000611-267210.00: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-091-2892

5340-12-091-3402

5340-12-358-7742
Pipe Hanger

123587742
NY22X41: RNCC: 3 | RNVC: 2
61194018: RNCC: 5 | RNVC: 2

13 Nov 2002

5340-12-372-9892
Rim Latch

123729892
631800000: RNCC: 3 | RNVC: 2

13 Sep 2007

5340-12-338-4563
Nonmetallic Bumper

123384563
81.96210.0164.NR60 BIS 70.ST: RNCC: 3 | RNVC: 2
EM4.60 NR60 BIS 70 SHORE: RNCC: 3 | RNVC: 9
81.96210.0164: RNCC: 5 | RNVC: 2
81962100164: RNCC: 5 | RNVC: 2
EM4.60: RNCC: 5 | RNVC: 9

12 Jul 1995

5340-12-198-3336
Butt Hinge

121983336
27 0323 264: RNCC: 2 | RNVC: 2
9859239: RNCC: 3 | RNVC: 9
27 0323 264: RNCC: 5 | RNVC: 2
27 0323 264: RNCC: 5 | RNVC: 9
270323264: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-356-9830
Dust And Moisture Seal Protective Cap

123569830
0005332731: RNCC: 3 | RNVC: 2

23 Apr 2002

5340-12-021-6459

5340-12-317-1977
Mounting Bracket

123171977
3224320215: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-326-0362
Support Hook

123260362
076-227700-902-0: RNCC: 2 | RNVC: 2
076-227700-902-0: RNCC: 3 | RNVC: 2

1 Aug 1991

5340-12-199-4136
Nonmetallic Bumper

121994136
3093260481: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-122-4570
Loop Clamp

121224570
3049951020: RNCC: 3 | RNVC: 2
A3049951020: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-183-1051

5340-12-126-0334

5340-12-173-8042
Dust And Moisture Seal Protective Plug

121738042
636591620056: RNCC: 3 | RNVC: 2
620NST18V1000H: RNCC: 5 | RNVC: 2
017-1326: RNCC: 5 | RNVC: 2
4168470: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-392-5054
Access Cover

123925054
L135M2902221: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-12-326-2078
Angle Bracket

123262078
3963010740: RNCC: 3 | RNVC: 2
396 301 07 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-393-6858
Block Clamp

123936858
06.67690-0657: RNCC: 3 | RNVC: 2
06.67690-0657: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-360-0012
Mounting Bracket

123600012
9414294140: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-360-4119
Angle Bracket

123604119
3513634221: RNCC: 3 | RNVC: 2
3513634221: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-389-3471
Strap Fastener Loop

123893471
900 207 001 000: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-12-177-8928
Mounting Bracket

121778928
4021590295: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-319-5625
Lock-Release Lever

123195625
731.06.079: RNCC: 3 | RNVC: 2
V731.06.079: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-027-4211

5340-12-391-4131
Runner

123914131
3114826: RNCC: 3 | RNVC: 2
03114826: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-12-313-2533
Mending Plate

123132533
200810: RNCC: 3 | RNVC: 2
23K26 0008 00.005: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-136-0838

5340-12-343-8930
Catch Strike

123438930
385102: RNCC: 3 | RNVC: 2

12 Aug 1997

5340-12-313-5651
Friction Catch

123135651
AZ1006T251: RNCC: 3 | RNVC: 2
AZ1006T251: RNCC: 5 | RNVC: 9

15 Apr 1988

5340-12-320-5702
Protection Bellows

123205702
4204 0707: RNCC: 3 | RNVC: 2
42040707: RNCC: 3 | RNVC: 2
42040707EC5036-51: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-359-5506
Caster Wheel

123595506
5005998: RNCC: 3 | RNVC: 2

17 Feb 2003

5340-12-330-1842
Friction Catch Stud Receptacle

123301842
105-23501.20: RNCC: 3 | RNVC: 2

11 Nov 1992

5340-12-332-7875
Flange Protector

123327875
160-75651-224: RNCC: 3 | RNVC: 2
15160-75651-224: RNCC: 5 | RNVC: 2
160-75651-224: RNCC: 5 | RNVC: 9

20 Sep 1993

5340-12-305-9804
Manual Control Handle

123059804
1865-010240.02.0: RNCC: 3 | RNVC: 9

16 Jan 1986

5340-12-307-4233
Electrical-Mechanical Equipment Post

123074233
VG95148C5,5XM3X35-ST: RNCC: 2 | RNVC: 2
5.13.351: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X35-ST: RNCC: 3 | RNVC: 2
18H184: RNCC: 3 | RNVC: 2
SP02346: RNCC: 5 | RNVC: 2
00.4.005.0062: RNCC: 5 | RNVC: 9

18 Jun 1986

5340-12-387-9378
Butt Hinge

123879378
2300586-199900.020.0: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-193-9030
Mending Plate

121939030
42182-11110.15: RNCC: 3 | RNVC: 2
42182-11110.15: RNCC: 3 | RNVC: 2
6720496: RNCC: 5 | RNVC: 2
6720496: RNCC: 5 | RNVC: 2
42182-11110-15: RNCC: 5 | RNVC: 9
42182-11110.15: RNCC: 5 | RNVC: 9

13 Sep 1982

5340-12-320-6463
Hand Crank

123206463
5801411-4511: RNCC: 3 | RNVC: 2

5 Feb 1990

5340-12-317-9464
Shimmy Damper

123179464
M2Q2-52-300-700/0900N: RNCC: 3 | RNVC: 2
M2Q2-52-300-700/900N: RNCC: 5 | RNVC: 2

29 May 1989

5340-12-122-3086
Nonmetallic Bumper

121223086
VG95092B12X8X25XSX9-PUR60: RNCC: 2 | RNVC: 2
VG95092B12X8X25X5X9-PUR60: RNCC: 3 | RNVC: 2
0009870040: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-310-7493
Access Cover

123107493
102002-0100: RNCC: 3 | RNVC: 2

26 Jun 1987

5340-12-306-0131
Retaining Strap

123060131
2505602: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-380-9727
Loop Clamp

123809727
08139083: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-12-382-4153
Dust And Moisture Seal Protective Cap-Plug

123824153
6000900050: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-12-384-8142
Turnbuckle

123848142
60.000.105: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-12-372-4815
Loop Clamp

123724815
9259073000: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-360-0011
Mounting Bracket

123600011
9414294069: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-379-3659
Threaded Rod End

123793659
0091705: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-12-317-1998
Mounting Bracket

123171998
3525040039: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-307-1979
Angle Bracket

123071979
RP650569: RNCC: 3 | RNVC: 2

21 May 1986

5340-12-328-9798
Permanent Magnet

123289798
HB16: RNCC: 3 | RNVC: 2
106403: RNCC: 3 | RNVC: 2
106.403: RNCC: 5 | RNVC: 2

4 Jul 1992

5340-12-318-9482
Detent Plunger

123189482
369836: RNCC: 3 | RNVC: 2
369836: RNCC: 5 | RNVC: 2
369836: RNCC: 5 | RNVC: 9

28 Aug 1989

5340-12-135-6527

5340-12-191-3481
Double Angle Bracket

121913481
4354266740: RNCC: 3 | RNVC: 2

26 Jan 1982

5340-12-306-6286
Recess Handle

123066286
84296: RNCC: 3 | RNVC: 2

17 Mar 1986

5340-12-335-6755
Dust And Moisture Seal Protective Plug

123356755
073-465300-901-0: RNCC: 2 | RNVC: 2
073-465300-901-0: RNCC: 3 | RNVC: 2

12 Sep 1994

5340-12-367-8700
Mounting Plate

123678700
T947M4005112: RNCC: 3 | RNVC: 2

26 Oct 2005

5340-12-165-2919
Mending Plate

121652919
SS3739-3: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-163-9032
Rod End Clevis

121639032
HAN17605-1-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-393-3355
Door Closer

123933355
TS1500: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-302-6641
Angle Bracket

123026641
5564961/3: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-322-5935
Mounting Bracket

123225935
42083211: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-12-366-5750
Dust And Moisture Seal Protective Cap-Plug

123665750
600B498: RNCC: 3 | RNVC: 2
GPN600B498: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-380-5855
Electromagnetic Lock

123805855
32RRF: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-12-362-9898
Padlock

123629898
202 90C/SB: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-343-5531
Retaining Strap

123435531
56011300030: RNCC: 3 | RNVC: 2
F300 0T 022 5260: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-187-8566
Handle Grip

121878566
34518.43344: RNCC: 3 | RNVC: 2
34518: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-701-6437
Angle Bracket

127016437
VG95211-ML-127016437: RNCC: 2 | RNVC: 2
5.12.7204.0260.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-6902
Case Corner

121956902
5801557-2110.00: RNCC: 2 | RNVC: 2
5801557-2110.00: RNCC: 3 | RNVC: 2
5801557-2110: RNCC: 5 | RNVC: 2
5801557-2110: RNCC: 5 | RNVC: 9

29 Mar 1983

5340-12-162-5246
Support Hook

121625246
100356-802000.10: RNCC: 2 | RNVC: 2
100356-802000.10: RNCC: 3 | RNVC: 2
100356-802000-10: RNCC: 5 | RNVC: 2
100356-802000-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-3983
Bail Handle

123313983
318574: RNCC: 3 | RNVC: 2
318574-22: RNCC: 5 | RNVC: 2
318574-66: RNCC: 5 | RNVC: 2

3 May 1993

5340-12-171-8000
Dust And Moisture Seal Protective Cap

121718000
37 024-016: RNCC: 3 | RNVC: 2
37024-007: RNCC: 5 | RNVC: 2
D18S20: RNCC: 5 | RNVC: 2

18 Nov 1977

5340-12-317-3185
Mounting Plate

123173185
4900064-4111.021: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-308-9619
Nonmetallic Bumper

123089619
1281-64360.05: RNCC: 2 | RNVC: 2
160155: RNCC: 3 | RNVC: 2
1281-64360.05: RNCC: 5 | RNVC: 2

2 Dec 1986

5340-12-365-3309
Access Cover

123653309
2300109-186225.001.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-390-7981
Lock Key Set

123907981
4.006-287.0: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-313-9573
Compression Cup

123139573
TFH114,2-150-12,5: RNCC: 3 | RNVC: 2
TFH114,2-150-12,5-4TF/529: RNCC: 5 | RNVC: 2

26 May 1988

5340-12-306-3382
Mending Plate

123063382
5801984-200500.001.0: RNCC: 2 | RNVC: 2
5801984-200500.001.0: RNCC: 3 | RNVC: 2

20 Feb 1986

5340-12-702-5636
Mounting Bracket

127025636
VG95211-ML-127025636: RNCC: 2 | RNVC: 2
5.51.7612.0043.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-337-1856
Access Cover

123371856
537173-1105.000: RNCC: 3 | RNVC: 2
537173-1105.000: RNCC: 5 | RNVC: 9

30 Jan 1995

5340-12-305-4934
Mending Plate

123054934
5803456-3100: RNCC: 2 | RNVC: 2
7802088310: RNCC: 3 | RNVC: 2
78020 88310: RNCC: 5 | RNVC: 9

14 Nov 1985

5340-12-339-7015
Nonmetallic Bumper

123397015
2500255-190500.003.0: RNCC: 2 | RNVC: 2
2500255-190500.003.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-321-1799
Spring Loaded Cylinder Fastener

123211799
2500067-102141.00: RNCC: 2 | RNVC: 2
2500067-102141.00: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-12-326-6013
Expansion Plug

123266013
DIN443-A14-ST-PHR: RNCC: 2 | RNVC: 2
N119074: RNCC: 5 | RNVC: 2

11 Oct 1991

5340-12-348-6464
Angle Bracket

123486464
245/4671-19-14-00: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-12-300-2176
Retaining Strap

123002176
23114-1900.25: RNCC: 2 | RNVC: 2
23114-1900.25: RNCC: 3 | RNVC: 2
23114-1900-25: RNCC: 5 | RNVC: 9
23114-1900.25: RNCC: 5 | RNVC: 9
23114-1900-25: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-166-8024
Retaining Strap

121668024
13732000: RNCC: 3 | RNVC: 2
0126 7330: RNCC: 5 | RNVC: 2
1267330EE8751-12: RNCC: 5 | RNVC: 2
8751-12-03-17: RNCC: 5 | RNVC: 2
1267330: RNCC: 5 | RNVC: 9

21 Oct 1976

5340-12-702-0059
Dust And Moisture Seal Protective Cap

127020059
VG95211-ML-127020059: RNCC: 2 | RNVC: 2
18 OST1 10481-72: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-177-5269
Mounting Bracket

121775269
12791-520000.003: RNCC: 2 | RNVC: 2
009-039.502-003: RNCC: 3 | RNVC: 2
12791-520000-003: RNCC: 5 | RNVC: 2
12791-520000-003: RNCC: 5 | RNVC: 9
12791-520000.003: RNCC: 5 | RNVC: 9
009-039-502-003: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-361-3325
Pipe Hanger

123613325
51057400093: RNCC: 3 | RNVC: 2
51.05740-0093: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-156-5506
Webbing Strap

121565506
42161-28000-18: RNCC: 3 | RNVC: 2
49420089: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-139-6007
Expansion Plug

121396007
DIN443-11-ST-ROH: RNCC: 2 | RNVC: 2
11DIN443R0H: RNCC: 5 | RNVC: 2
11DIN443: RNCC: 5 | RNVC: 2
0630 361 030: RNCC: 5 | RNVC: 2
0003209330: RNCC: 5 | RNVC: 2
0630361030: RNCC: 5 | RNVC: 9
0003209330: RNCC: 5 | RNVC: 9
3209330: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-8360
Elastic Strap

123508360
58R119-1184: RNCC: 3 | RNVC: 2

26 May 2000

5340-12-332-7992
Mounting Bracket

123327992
160-74643: RNCC: 3 | RNVC: 2
160-74643: RNCC: 5 | RNVC: 9

21 Sep 1993

5340-12-309-5077
Snap Hook

123095077
NO PRIMARY REF 12-309-5077: RNCC: 3 | RNVC: 2
LM-6364: RNCC: 5 | RNVC: 9

29 Jan 1987

5340-12-376-6826
Antipilferage Seal

123766826
1999.92000015: RNCC: 3 | RNVC: 2
81913200102: RNCC: 5 | RNVC: 2
81.91320-0102: RNCC: 5 | RNVC: 2

28 Oct 2008

5340-12-194-8367
Ball Socket Seat

121948367
009-099.100-004: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-12-388-2766
Elastic Strap

123882766
F1.1697-00-01-12.00-02: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-12-185-8205
Retaining Strap

121858205
V22-918-111100-02EZ4: RNCC: 3 | RNVC: 2
V22-918-111100-02EZ4: RNCC: 5 | RNVC: 2

1 Nov 1980

5340-12-366-2090
Access Cover

123662090
J53227065-405: RNCC: 3 | RNVC: 2

22 Mar 2005

5340-12-358-9786
Lock Key

123589786
6.369-414.0: RNCC: 3 | RNVC: 2
6.369-414.0: RNCC: 5 | RNVC: 2

4 Dec 2002

5340-12-346-4586
Dust And Moisture Seal Protective Cap

123464586
U100-3740-004: RNCC: 3 | RNVC: 2
U100-3730-010: RNCC: 5 | RNVC: 2

28 Jul 1998

5340-12-311-4141
Nonmetallic Bumper

123114141
2863007000: RNCC: 3 | RNVC: 2
2863 007 000: RNCC: 5 | RNVC: 2

31 Aug 1987

5340-12-179-7630
Mending Plate

121797630
81908010247: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-184-9692
Halter

121849692
6020327: RNCC: 3 | RNVC: 2

28 Aug 1980

5340-12-199-7057
Pawl Fastener

121997057
0287 8743: RNCC: 3 | RNVC: 2
2878743: RNCC: 5 | RNVC: 2
2878743ED0693-60: RNCC: 5 | RNVC: 2

24 May 1984

5340-12-390-8570
Spring Holder

123908570
10187-188337.000.0: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-12-363-5149
Spring Loaded Cylinder Fastener

123635149
1030084-185425.000.0: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-329-0525
Bridge Clamp

123290525
VP937-5-4: RNCC: 3 | RNVC: 2

14 Jul 1992

5340-12-376-8084
Mounting Actuator Plate

123768084
511F01502/1: RNCC: 3 | RNVC: 2

10 Nov 2008

5340-12-185-1837
Mounting Bracket

121851837
Q 320 790 031: RNCC: 3 | RNVC: 2
Q 320 790 031: RNCC: 3 | RNVC: 2
Q320790031: RNCC: 5 | RNVC: 2
Q320790031: RNCC: 5 | RNVC: 2

18 Sep 1980

5340-12-194-2104
Electrical-Mechanical Equipment Post

121942104
5551178: RNCC: 3 | RNVC: 2
555.1178: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-351-7820
Dust And Moisture Seal Protective Cap

123517820
1420505073: RNCC: 3 | RNVC: 2

22 Aug 2000

5340-12-318-6994
Spring Loaded Cylinder Fastener

123186994
9114.995.4: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-12-172-3814
Mending Plate

121723814
80-818165-4: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-12-354-3631
Manual Control Lever

123543631
0008330725: RNCC: 3 | RNVC: 2
0008330725: RNCC: 5 | RNVC: 2
A 000 833 07 25: RNCC: 5 | RNVC: 9

4 Jul 2001

5340-12-308-1856
Double Angle Bracket

123081856
81651102110: RNCC: 3 | RNVC: 2

11 Sep 1986

5340-12-312-2114
Mending Plate

123122114
4900123-911000.23: RNCC: 3 | RNVC: 2
4900123-911000.23: RNCC: 5 | RNVC: 2
4900123-911000.23: RNCC: 5 | RNVC: 9

4 Dec 1987

5340-12-043-9166

5340-12-349-7841
Mending Plate

123497841
0044-602130B06B: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-300-6655
Mending Plate

123006655
3816400211: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-300-6700
Helical Compression Spring Seat

123006700
4253250526: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-342-1551
Mounting Bracket

123421551
135M21743: RNCC: 3 | RNVC: 2
135M21743D1: RNCC: 5 | RNVC: 2
135M21743D1: RNCC: 5 | RNVC: 2

19 Dec 1996

5340-12-330-4648
Angle Bracket

123304648
4160MS: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-12-175-3372
Nonmetallic Bumper

121753372
803721231: RNCC: 3 | RNVC: 2

11 Sep 1978

5340-12-379-5421
Angle Bracket

123795421
S535M1007233: RNCC: 3 | RNVC: 2

5 Aug 2009

5340-12-090-7145

5340-12-011-4925

5340-12-194-6512
Lock-Release Lever

121946512
5091848: RNCC: 3 | RNVC: 2

25 Nov 1982

5340-12-391-4313
Mounting Bracket

123914313
I006173TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-183-5771
Access Cover

121835771
23223-187102.09.0: RNCC: 2 | RNVC: 2
23223-187102-09-0: RNCC: 5 | RNVC: 2
23223-187102.09.0: RNCC: 5 | RNVC: 2
23223-187102-09-0: RNCC: 5 | RNVC: 9

3 May 1980

5340-12-324-4630
Lock-Release Lever

123244630
1181-03.00: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-12-311-8406
Mending Plate

123118406
136-040.13-015: RNCC: 3 | RNVC: 2

22 Oct 1987

5340-12-361-4698
Dust And Moisture Seal Protective Cap

123614698
009-222.491-000: RNCC: 2 | RNVC: 2
009-222.491-000: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-313-0080
Bridge Clamp

123130080
4284-140.03: RNCC: 3 | RNVC: 2
CH14587: RNCC: 5 | RNVC: 2
CH14587: RNCC: 5 | RNVC: 9
4284-140.03: RNCC: 5 | RNVC: 9

25 Feb 1988

5340-12-159-8632
Expansion Plug

121598632
100332-16000.58: RNCC: 2 | RNVC: 2
100332-16000-58: RNCC: 5 | RNVC: 2
100332-16000.58: RNCC: 5 | RNVC: 2
100332-16000-58: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-1288
Mounting Bracket

123181288
5600023-190116.000.0: RNCC: 2 | RNVC: 2
5600023-190116.000.0: RNCC: 3 | RNVC: 2
1596677: RNCC: 5 | RNVC: 2

14 Jun 1989

5340-12-152-1398
Ball Socket Seat

121521398
12786-100-41-0: RNCC: 3 | RNVC: 2
12786-100-41-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6856
Angle Bracket

127016856
VG95211-ML-127016856: RNCC: 2 | RNVC: 2
5.12.7220.2040.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-4813
Elastic Strap

123384813
2500082-194141.00.0: RNCC: 2 | RNVC: 2
2500082-194141.00.0: RNCC: 3 | RNVC: 2
2500082-194141.00.0: RNCC: 3 | RNVC: 2
2500082-194141.00.0: RNCC: 3 | RNVC: 2
82300-M265X20-SI-STZN-OG: RNCC: 6 | RNVC: 9

18 Jul 1995

5340-12-193-3658
Retaining Strap

121933658
5801964-104000.002: RNCC: 2 | RNVC: 2
5801964-104000.002: RNCC: 3 | RNVC: 2
5801964-104000.002: RNCC: 5 | RNVC: 9
5801964-104000-002: RNCC: 5 | RNVC: 9

14 Jul 1982

5340-12-156-8621
Resilient Mount

121568621
DIN95363-B25X20-M6X15-NR55ST: RNCC: 4 | RNVC: 1
510021-M6X15.NR55.ST: RNCC: 5 | RNVC: 2
9010-01-001-4000-39: RNCC: 5 | RNVC: 2
VG95363-B25X20-M6X15-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-171-7121
Resilient Mount

121717121
NDC2-9: RNCC: 3 | RNVC: 2
NDC2-9: RNCC: 3 | RNVC: 9

7 Nov 1977

5340-12-091-4893

5340-12-348-9806
Loop Clamp

123489806
EFP15004-1: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-300-9873
Retaining Strap

123009873
BSN18X20X2ZWEILASCHIG: RNCC: 3 | RNVC: 2
5210000018: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-313-2946
Webbing Strap

123132946
63683: RNCC: 3 | RNVC: 9
150 04 000: RNCC: 3 | RNVC: 9

18 Mar 1988

5340-12-024-8201

5340-12-197-6176

5340-12-378-3931
Mounting Bracket

123783931
230 264: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-313-8655
Angle Bracket

123138655
4244680040: RNCC: 3 | RNVC: 2
424 468 00 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-177-5503
Dust And Moisture Seal Protective Plug

121775503
4116830010: RNCC: 3 | RNVC: 2

5 Feb 1979

5340-12-367-2201
Angle Bracket

123672201
111.281.522.7DS: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-300-2720
Mending Plate

123002720
A11A243304511: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-181-6268
Helical Compression Spring Seat

121816268
101-27-1: RNCC: 3 | RNVC: 2

10 Dec 1979

5340-12-702-9051
Antipilferage Seal Locking Wire

127029051
0-8KO: RNCC: 3 | RNVC: 2

30 Nov 1996

5340-12-359-9389
Mounting Plate

123599389
2500261-820000.005.0: RNCC: 2 | RNVC: 2
2500261-820000.005.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-300-9823
Dust And Moisture Seal Protective Cap

123009823
08690: RNCC: 3 | RNVC: 9

14 Sep 1984

5340-12-340-7817
Mounting Bracket

123407817
5801984-981131.000.0: RNCC: 2 | RNVC: 2
5801984-981131.000.0: RNCC: 3 | RNVC: 2

12 Jun 1996

5340-12-351-5947
T Bracket

123515947
10063-608200.01: RNCC: 3 | RNVC: 2
10063-608200.01: RNCC: 5 | RNVC: 9

7 Aug 2000

5340-12-194-0314
Resilient Mount

121940314
4031550250: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-304-6987
Loop Clamp

123046987
02914322: RNCC: 3 | RNVC: 2
2208228981: RNCC: 5 | RNVC: 2

13 Aug 1985

5340-12-320-2372
Pad Eye

123202372
217338-3000: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-12-304-5878
Spring Tension Clip

123045878
1411250000: RNCC: 3 | RNVC: 2
ASC1580826: RNCC: 5 | RNVC: 9

1 Aug 1985

5340-12-010-4300

5340-12-329-4628
Key Blank

123294628
1168: RNCC: 3 | RNVC: 2

21 Aug 1992

5340-12-350-3641
Bow Handle

123503641
105-853771: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-391-4856
Butt Hinge Leaf

123914856
I009892TAN686A: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-175-6611
Clamping Catch

121756611
2510 00 0000: RNCC: 3 | RNVC: 2
LS2002-0.1: RNCC: 5 | RNVC: 2
2510 00 4700: RNCC: 5 | RNVC: 2
5251000000: RNCC: 5 | RNVC: 2
5251047000: RNCC: 5 | RNVC: 2

10 Oct 1978

5340-12-147-1382
Loop Clamp

121471382
10TAN15801-1-4544-9: RNCC: 3 | RNVC: 2
10N10TAN15801: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-1929
Webbing Strap

123581929
1000173-190015.000.0: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-393-0204
Access Cover

123930204
1030105-184510.005.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-312-5826
Sealing Plug Assembly

123125826
2300194-181740.001: RNCC: 2 | RNVC: 2
2300194-181740.001: RNCC: 3 | RNVC: 2
2300194-181740.001: RNCC: 5 | RNVC: 9
9843647: RNCC: 5 | RNVC: 9
2300194-181740.001: RNCC: 5 | RNVC: 9

19 Jan 1988

5340-12-348-9093
Mechanical Stop

123489093
245/7383-02-00-27: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-323-8618
Snap Hook

123238618
DIN5299-C70-1.4571: RNCC: 2 | RNVC: 2
00245-I-070X07: RNCC: 3 | RNVC: 9
977001: RNCC: 5 | RNVC: 2
DIN5299-C70-1.4571: RNCC: 5 | RNVC: 2
5122NV: RNCC: 5 | RNVC: 9
245 I-70X7: RNCC: 5 | RNVC: 9

2 Jan 1991

5340-12-369-6918
Mounting Plate

123696918
2300306-182220.000.0: RNCC: 2 | RNVC: 2
2300306-182220.000.0: RNCC: 3 | RNVC: 2

9 Aug 2006

5340-12-332-5249
Mounting Bracket

123325249
2300232-063770.000.0: RNCC: 2 | RNVC: 2
2300232-063770.000.0: RNCC: 3 | RNVC: 2

18 Aug 1993

5340-12-171-0822
Spring Tension Clip

121710822
5077 309 008: RNCC: 3 | RNVC: 2
0004311040: RNCC: 5 | RNVC: 2
03499189: RNCC: 5 | RNVC: 2
3499189EE7101-65: RNCC: 5 | RNVC: 2
81.97401-0660: RNCC: 5 | RNVC: 2
81974010660: RNCC: 5 | RNVC: 2
3-3505-0801-1: RNCC: 5 | RNVC: 2

7 Sep 1977

5340-12-342-6656
Runner

123426656
347-220-053: RNCC: 2 | RNVC: 2
347-220-053: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-12-321-3111
Swivel Caster

123213111
00166-047-000: RNCC: 3 | RNVC: 2
166-47-00: RNCC: 5 | RNVC: 9

3 May 1990

5340-12-155-5039
Butt Hinge Leaf

121555039
160-725033-03: RNCC: 3 | RNVC: 2
160-725033-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-7683
Mounting Bracket

123547683
FM-E3-3004400: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-12-183-6327
Angle Bracket

121836327
2300034-180210-03: RNCC: 2 | RNVC: 2
42018277: RNCC: 5 | RNVC: 2
42018277ED5007-59: RNCC: 5 | RNVC: 2
2300034-180210.03: RNCC: 5 | RNVC: 9
2300034-180210-03: RNCC: 5 | RNVC: 9

6 May 1980

5340-12-358-1747
Mounting Bracket

123581747
4000A-310400.085.0: RNCC: 2 | RNVC: 2
4000A-310400.085.0: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-177-3852
Resilient Mount

121773852
50002728: RNCC: 3 | RNVC: 2
571269477: RNCC: 5 | RNVC: 2
54025010: RNCC: 5 | RNVC: 2
81100-2140511EE0147-58: RNCC: 5 | RNVC: 2
4071240: RNCC: 5 | RNVC: 2
0214 0511: RNCC: 5 | RNVC: 2
2140511EE0147-58: RNCC: 5 | RNVC: 2
4798883: RNCC: 5 | RNVC: 2
2140511: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-355-3554
Lock-Release Lever

123553554
50208040-01: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-12-309-7454
Access Cover

123097454
70.1200.221-03: RNCC: 3 | RNVC: 2

23 Feb 1987

5340-12-317-6075
Mounting Bracket

123176075
C72165-A421-B208: RNCC: 3 | RNVC: 2

21 Apr 1989

5340-12-365-3226
Angle Bracket

123653226
J53230206-403: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-382-7115
Manual Control Handle

123827115
66601000: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-12-135-6509

5340-12-339-0519
Webbing Strap

123390519
4618901794: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-384-4583
Nut And Bolt Locking Plate

123844583
5329940125: RNCC: 3 | RNVC: 2

24 Feb 2011

5340-12-381-5052
Mounting Bracket

123815052
4040000101: RNCC: 3 | RNVC: 2

24 Feb 2010

5340-12-366-7306
Mounting Bracket

123667306
BD5.250.862.220: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-389-1346
Expansion Shield

123891346
050399: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-389-1392
Expansion Shield

123891392
050250: RNCC: 3 | RNVC: 2
07402550: RNCC: 5 | RNVC: 2
050250: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-367-4399
Loop Clamp

123674399
883 12: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-372-4907
Nonmetallic Bumper

123724907
10015759: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-379-2378
Mounting Plate

123792378
0092280: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-12-359-9697
Mounting Bracket

123599697
9412850740: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-382-1046
Loop Clamp

123821046
2130351: RNCC: 3 | RNVC: 2

10 May 2010

5340-12-154-6168
Resilient Mount

121546168
80708601: RNCC: 3 | RNVC: 2
8202234012: RNCC: 3 | RNVC: 2
800.8202234012: RNCC: 5 | RNVC: 2
8202234012: RNCC: 5 | RNVC: 2
28202234012: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-345-9753
Spacing Threaded Standoff

123459753
52.0271.630.03: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-320-0755
Double Angle Bracket

123200755
6124001: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-364-4307
Angle Bracket

123644307
54.1107.405.00: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-176-3642
Retaining Band

121763642
183819881: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-325-6793
Nonmetallic Bumper

123256793
5400026-6300-04: RNCC: 2 | RNVC: 2
5400026-6300-04: RNCC: 3 | RNVC: 2
5400026-6300-04: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-12-026-0822

5340-12-338-9603
Mounting Bracket

123389603
463-611000.001: RNCC: 3 | RNVC: 9
9894226: RNCC: 5 | RNVC: 9

20 Sep 1995

5340-12-344-0414
Butt Hinge

123440414
2996.72.21: RNCC: 3 | RNVC: 2
2996.7221: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-311-1101
Dust And Moisture Seal Protective Cap

123111101
BS649410-8: RNCC: 3 | RNVC: 2

28 Jul 1987

5340-12-197-4420
Electrical-Mechanical Equipment Post

121974420
ESK1978-4-1: RNCC: 3 | RNVC: 2

24 Oct 1983

5340-12-391-0423
Mounting Bracket

123910423
2300559-821000.001.0: RNCC: 2 | RNVC: 2
2300559-821000.001.0: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-158-6712

5340-12-190-4622
Tubular Fairlead

121904622
205A134-3/42: RNCC: 3 | RNVC: 2

30 Nov 1981

5340-12-365-3915
Double Angle Bracket

123653915
2500075-731214.000.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-358-5902
Mending Plate

123585902
2.72-38085: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-307-5562
Angle Bracket

123075562
2500179-280000.005.0: RNCC: 2 | RNVC: 2
2500179-280000.005.0: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-12-192-8948
Angle Bracket

121928948
4606890014: RNCC: 3 | RNVC: 2
721 1 87 031 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-318-8884
Access Cover

123188884
M534222-1: RNCC: 3 | RNVC: 9
M534222-1: RNCC: 5 | RNVC: 2

23 Aug 1989

5340-12-373-2857
Dust And Moisture Seal Protective Cap

123732857
255-5: RNCC: 3 | RNVC: 2
GPN255-5: RNCC: 5 | RNVC: 2

18 Oct 2007

5340-12-168-2021
Cremone Bolt

121682021
WW 208 027 -R: RNCC: 2 | RNVC: 2
WW 208 027 -R: RNCC: 3 | RNVC: 9
WW2080270R: RNCC: 5 | RNVC: 2
WW 208 027 -R: RNCC: 5 | RNVC: 2
WW2080270R: RNCC: 5 | RNVC: 9

25 Feb 1977

5340-12-354-4768
Access Cover

123544768
075 109 108 B: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-12-197-9122
Double Angle Bracket

121979122
CF 339 050 A: RNCC: 3 | RNVC: 2
CF 339 050 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-195-8952
Nonmetallic Bumper

121958952
2-108VG85529: RNCC: 2 | RNVC: 2

28 Apr 1983

5340-12-180-5616
Cremone Bolt

121805616
01242019: RNCC: 3 | RNVC: 2
1242019EZ8935-37: RNCC: 5 | RNVC: 2
N92315W: RNCC: 5 | RNVC: 2
01242019: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-382-8286
Loop Clamp

123828286
ROND418X: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-12-355-4841
Friction Catch

123554841
9112.985.4: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-326-4548
Double Angle Bracket

123264548
3963120887: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-344-2197
Access Cover

123442197
1216 3814: RNCC: 3 | RNVC: 2
6.234.0.950.027.4: RNCC: 5 | RNVC: 2
12163814: RNCC: 5 | RNVC: 2

1 Oct 1997

5340-12-375-0445
Filler Opening Cap

123750445
902116201: RNCC: 3 | RNVC: 2

16 Apr 2008

5340-12-303-5375
Elbow Catch

123035375
7820403400: RNCC: 3 | RNVC: 2
78204 03400: RNCC: 5 | RNVC: 2

2 Apr 1985

5340-12-178-9000
Mounting Bracket

121789000
CF 437 709 A: RNCC: 3 | RNVC: 2
CF 437 709 A: RNCC: 5 | RNVC: 2
CF437709A: RNCC: 5 | RNVC: 2
CF 437 709 A: RNCC: 5 | RNVC: 2
CF437709A: RNCC: 5 | RNVC: 2
CF437709A: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-302-7861
Mending Plate

123027861
CF 339 436 A: RNCC: 3 | RNVC: 2
CF 339 436 A: RNCC: 5 | RNVC: 2
CF 339 436: RNCC: 5 | RNVC: 9
CF 339 436: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-307-4893
Dust And Moisture Seal Protective Cap

123074893
1270.1,8.0.866: RNCC: 3 | RNVC: 2

24 Jun 1986

5340-12-358-6451
Mounting Bracket

123586451
2500262-394300.025.0: RNCC: 2 | RNVC: 2
2500262-394300.025.0: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-305-8524
Pipe Bracket

123058524
2300109-970920.000.0: RNCC: 2 | RNVC: 2
2300109-970920.000.0: RNCC: 3 | RNVC: 2
2300109-970920.000.0: RNCC: 3 | RNVC: 2
2300109-970920.000.0: RNCC: 5 | RNVC: 9

27 Dec 1985

5340-12-355-1098
Helical Compression Spring Seat

123551098
4B42877: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-300-2709
Mending Plate

123002709
A11A131111211: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-352-2254
Angle Bracket

123522254
5561531140: RNCC: 3 | RNVC: 2
556 153 11 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-314-5448
Mending Plate

123145448
3534291940: RNCC: 3 | RNVC: 2
353 429 19 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-374-5746
Dust And Moisture Seal Protective Cap-Plug

123745746
5407015: RNCC: 3 | RNVC: 2

27 Feb 2008

5340-12-143-3840

5340-12-361-1986
Dust And Moisture Seal Protective Cap-Plug

123611986
7861011011: RNCC: 2 | RNVC: 2
7861011011: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-091-7494

5340-12-353-4451
Bow Handle

123534451
0713154: RNCC: 3 | RNVC: 2
071.3154: RNCC: 5 | RNVC: 2

23 Mar 2001

5340-12-367-2980
Mounting Bracket

123672980
881.902-2: RNCC: 3 | RNVC: 2

29 Jul 2005

5340-12-307-9481
Mending Plate

123079481
8-6921.01: RNCC: 2 | RNVC: 2
8-6921.01: RNCC: 3 | RNVC: 2
8-6921.01: RNCC: 5 | RNVC: 9
9841176: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-198-2449
Mending Plate

121982449
A365084-2: RNCC: 3 | RNVC: 9
A365084-2: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-188-7759
Webbing Strap

121887759
5801479-3083: RNCC: 2 | RNVC: 2
5801479-3083: RNCC: 3 | RNVC: 2
5801479-3083: RNCC: 5 | RNVC: 9
000-F1-25X2,0X280-PE-RAL6031: RNCC: 6 | RNVC: 9

29 Jul 1981

5340-12-146-3905
Nonmetallic Bumper

121463905
C30363A63C6: RNCC: 3 | RNVC: 2
C30363-A63-C6: RNCC: 5 | RNVC: 2
FGTIST63A6: RNCC: 5 | RNVC: 2
VSAHST63A6: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-7150
Mounting Bracket

123087150
P-295439-063: RNCC: 3 | RNVC: 2
P295439-063: RNCC: 5 | RNVC: 2

10 Nov 1986

5340-12-392-4758
Webbing Strap

123924758
4100038-150226.000.0: RNCC: 2 | RNVC: 2
4100038-150226.000.0: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-701-3964
Mounting Bracket

127013964
VG95211-ML-127013964: RNCC: 2 | RNVC: 2
5.12.5311.2760.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-9471
Spring Tension Clip

123159471
L.S.100/25: RNCC: 3 | RNVC: 2
L.S.100/25 K: RNCC: 5 | RNVC: 2
L.S.100/25 S: RNCC: 5 | RNVC: 2
LS100/25: RNCC: 5 | RNVC: 2
LS100/25: RNCC: 5 | RNVC: 9

9 Dec 1988

5340-12-349-6068
Metal Grille

123496068
2500238-150920.002.0: RNCC: 2 | RNVC: 2
2500238-150920.002.0: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-702-0181
Angle Bracket

127020181
VG95211-ML-127020181: RNCC: 2 | RNVC: 2
2.51.6402.0070.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-8348
Access Cover

123088348
1281-51000.02: RNCC: 2 | RNVC: 2
160262: RNCC: 3 | RNVC: 2
1281-51000.02: RNCC: 5 | RNVC: 2

21 Nov 1986

5340-12-130-8718
Screw Hook

121308718
110981: RNCC: 3 | RNVC: 2
ART11-40MMLANGMESSING: RNCC: 5 | RNVC: 2
ART11-40MMLANGMESSING: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-8109
Catch Strike

123118109
4607430611: RNCC: 3 | RNVC: 2
9223380980: RNCC: 5 | RNVC: 2
8726-38: RNCC: 5 | RNVC: 2

19 Oct 1987

5340-12-367-7891
Caster Wheel

123677891
106/7346-54-00-02: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-12-337-9428
Mounting Bracket

123379428
64414131: RNCC: 3 | RNVC: 2
421.1289-01.3ST: RNCC: 5 | RNVC: 2
4414/131: RNCC: 5 | RNVC: 9

4 May 1995

5340-12-183-6304
Access Cover

121836304
30-79510-0026: RNCC: 3 | RNVC: 2

6 May 1980

5340-12-386-4175
Mounting Bracket

123864175
67778: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-390-3756
Expansion Shield

123903756
MSD 8X40: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-12-379-1682
Angle Bracket

123791682
0069314: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-358-9208
Double Angle Bracket

123589208
3852952640: RNCC: 3 | RNVC: 2

28 Nov 2002

Load More Results