What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 67 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 67 of 178

5340-12-144-2977
Loop Clamp

121442977
999-511-007-02: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-123-4580
Retaining Strap

121234580
81974010014: RNCC: 3 | RNVC: 2
00.00430-6001: RNCC: 5 | RNVC: 2
00004306001: RNCC: 5 | RNVC: 2
R6001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-317-5320
Hand Carrying Strap Assembly

123175320
0004527: RNCC: 3 | RNVC: 2
45-27: RNCC: 3 | RNVC: 2

14 Apr 1989

5340-12-394-3156
Section Block Clamp

123943156
M291M800320000: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-12-387-5293
Door Closer

123875293
DORMA TS 71: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-12-159-0399
Nonmetallic Bumper

121590399
8381590386: RNCC: 2 | RNVC: 2
8381590386: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-343-4277
Casement Fastener

123434277
RDRS 9: RNCC: 3 | RNVC: 2
269907: RNCC: 5 | RNVC: 2
RDRS9: RNCC: 5 | RNVC: 2

19 Jun 1997

5340-12-347-8577
Mechanic Equipment Hardware Kit

123478577
01.7407/A: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-12-384-8982
Section Block Clamp

123848982
55698-M: RNCC: 3 | RNVC: 2

7 Apr 2011

5340-12-325-0648
Mounting Plate

123250648
702-762000-902-0: RNCC: 3 | RNVC: 2

29 Apr 1991

5340-12-174-6555
Clamp Bolt Assembly

121746555
V3SD 18105-3: RNCC: 3 | RNVC: 2
V3SD18105-3: RNCC: 5 | RNVC: 2

17 Jul 1978

5340-12-393-6652
Mounting Bracket

123936652
4100098-982410.002.0: RNCC: 2 | RNVC: 2
4100098-982410.002.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-189-4611
Angle Bracket

121894611
AZ 6009 T 81: RNCC: 3 | RNVC: 9
AZ6009T81: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-12-345-3885
Dust And Moisture Seal Protective Cap

123453885
0000030454014: RNCC: 3 | RNVC: 2

10 Mar 1998

5340-12-320-8766
Manual Control Handle

123208766
35 4091 80: RNCC: 3 | RNVC: 2
192058: RNCC: 5 | RNVC: 2
35409180: RNCC: 5 | RNVC: 2

28 Feb 1990

5340-12-090-1767

5340-12-301-7701
Nonmetallic Bumper

123017701
4178369: RNCC: 3 | RNVC: 2
S12B.K04.03.00.008: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-370-0423
Tie Down Adapter

123700423
71138: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-12-334-7829
Mounting Plate

123347829
52.0099.100.23: RNCC: 2 | RNVC: 2
52.0099.100.23: RNCC: 3 | RNVC: 2

21 Jun 1994

5340-12-044-2932

5340-12-025-8697

5340-12-317-7321
Nonmetallic Bumper

123177321
3365801: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-378-3080
Door Closer

123783080
83010103: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-367-1254
Angle Bracket

123671254
T263M1005102: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-12-344-1075
Angle Bracket

123441075
2300421-330010.006: RNCC: 2 | RNVC: 2
9919657: RNCC: 3 | RNVC: 2
2300421-330010.006: RNCC: 5 | RNVC: 2
9919657: RNCC: 5 | RNVC: 9
2300421-330010.006: RNCC: 5 | RNVC: 9

12 Sep 1997

5340-12-340-8015
Mounting Plate

123408015
23182-7007.11: RNCC: 2 | RNVC: 2
23182-7007.11: RNCC: 3 | RNVC: 2
29705: RNCC: 5 | RNVC: 2

14 Jun 1996

5340-12-337-9029
Mounting Bracket

123379029
9895112: RNCC: 3 | RNVC: 9
465-151164.000: RNCC: 5 | RNVC: 9

2 May 1995

5340-12-195-4650
Catch Strike

121954650
52.1405.136.01: RNCC: 3 | RNVC: 2
52-1405-136-01: RNCC: 5 | RNVC: 2

1 Mar 1983

5340-12-176-4881
Angle Bracket

121764881
2408106EE0147-01: RNCC: 3 | RNVC: 2
0240 8106: RNCC: 5 | RNVC: 2
2408106: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-350-4179
Butt Hinge Leaf

123504179
J52424082-001: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-378-3907
Section Block Clamp

123783907
J29120399-001: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-123-2201
Retaining Strap

121232201
03430781: RNCC: 3 | RNVC: 2
3430781EF5093-29: RNCC: 5 | RNVC: 2
5166-29-20.07: RNCC: 5 | RNVC: 2
F5166-29-20-07: RNCC: 5 | RNVC: 2
5166-29-20-07: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-3355
Loop Clamp

123683355
037698: RNCC: 3 | RNVC: 2
RCP1-112-RCP/A4: RNCC: 5 | RNVC: 2

20 Feb 2006

5340-12-317-6095
Angle Bracket

123176095
1000192-02 0 40100: RNCC: 2 | RNVC: 2
1000192-02 0 40100: RNCC: 3 | RNVC: 2
10003-02 0 40100: RNCC: 5 | RNVC: 9
1000192-02 0 40100: RNCC: 5 | RNVC: 9
10003-02 0 40100: RNCC: 5 | RNVC: 9

21 Apr 1989

5340-12-303-8394
Mending Plate

123038394
0289 4979: RNCC: 3 | RNVC: 2
2894979: RNCC: 5 | RNVC: 2
2894979KZ0704-91: RNCC: 5 | RNVC: 2

7 May 1985

5340-12-191-1743
Rubber Bumper

121911743
50260: RNCC: 3 | RNVC: 2
X3750260: RNCC: 5 | RNVC: 2
X3750260: RNCC: 5 | RNVC: 9

18 Jan 1982

5340-12-386-8345
Block Clamp

123868345
58080107: RNCC: 3 | RNVC: 2
CV190746: RNCC: 5 | RNVC: 2
58080107: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-331-2210
Lock-Release Lever

123312210
0287002: RNCC: 3 | RNVC: 2

2 Apr 1993

5340-12-300-6500
Mending Plate

123006500
1000091-3000.01: RNCC: 2 | RNVC: 2
1000091-3000.01: RNCC: 3 | RNVC: 2

21 Aug 1984

5340-12-026-6968

5340-12-043-2667

5340-12-301-6366
Angle Bracket

123016366
43712253-601: RNCC: 2 | RNVC: 2
43712253-601: RNCC: 3 | RNVC: 2
43712253-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-193-0959
Padlock

121930959
DIN7465-D1-50-LQ1000-MS-ST: RNCC: 2 | RNVC: 2
007465050103: RNCC: 5 | RNVC: 2
A50DIN7465-MS-ST-1000: RNCC: 5 | RNVC: 2
A50DIN7465MSST1000: RNCC: 5 | RNVC: 2
DIN7465-A50-MS-ST-1000: RNCC: 5 | RNVC: 2

22 Jun 1982

5340-12-323-9677
Mending Plate

123239677
5803619-301000.000: RNCC: 2 | RNVC: 2
7802534310: RNCC: 3 | RNVC: 2
78025 34310: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-321-2730
Bow Handle

123212730
588.90-222500-001: RNCC: 3 | RNVC: 2
122004: RNCC: 5 | RNVC: 2

26 Apr 1990

5340-12-304-4315
Dust And Moisture Seal Protective Cap

123044315
3/0953/7005/1: RNCC: 2 | RNVC: 2
3/0953/7005/1: RNCC: 3 | RNVC: 2

17 Jul 1985

5340-12-367-0435
Mounting Bracket

123670435
PIKVWA40/40VA: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-027-5797

5340-12-388-0255
Angle Bracket

123880255
5841871440: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-197-7901
Electrical-Mechanical Equipment Post

121977901
ESK1977-3-1: RNCC: 3 | RNVC: 2

23 Nov 1983

5340-12-346-1700
Mounting Bracket

123461700
4240019924: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-12-191-3442
Metal Runner

121913442
CF 307 888: RNCC: 3 | RNVC: 2
CF 307 888: RNCC: 5 | RNVC: 2
CF307888: RNCC: 5 | RNVC: 2
CF307888: RNCC: 5 | RNVC: 9

26 Jan 1982

5340-12-384-6685
Swivel Caster

123846685
8477 UOO 160 P63: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-12-332-5594
Lock-Release Lever

123325594
2300279-9701.19: RNCC: 2 | RNVC: 2
2300279-9701.19: RNCC: 3 | RNVC: 2
9894801: RNCC: 5 | RNVC: 9
2300279-9701.19: RNCC: 5 | RNVC: 9

19 Aug 1993

5340-12-331-7455
Mounting Plate

123317455
55.2509.000.11: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-12-315-6946
Handwheel

123156946
675048: RNCC: 3 | RNVC: 2

19 Nov 1988

5340-12-041-9976

5340-12-091-3375

5340-12-360-7123
Mounting Bracket

123607123
5446/03-024: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-190-3044
Bow Handle

121903044
VG95149A177,8X42-M6AL-SW: RNCC: 2 | RNVC: 2
CF478145A: RNCC: 3 | RNVC: 2
CF478145A: RNCC: 3 | RNVC: 2
CF 478 145 A: RNCC: 5 | RNVC: 2
CF 478 145 A: RNCC: 5 | RNVC: 2

17 Nov 1981

5340-12-192-6698
Festhalte- Klipp

5340-12-385-6479
Rod End Clevis

123856479
1091270: RNCC: 3 | RNVC: 2
F1.1189-40-30-20.00-05: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-12-350-1049
Manual Control Handle

123501049
2125-111162.00C: RNCC: 2 | RNVC: 2
2125-111162.00C: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-12-165-4635
Loop Clamp

121654635
307.141-10001.00: RNCC: 3 | RNVC: 2
0307141-10001-00: RNCC: 5 | RNVC: 9

18 May 1976

5340-12-193-5999
Webbing Strap

121935999
25892-1600: RNCC: 2 | RNVC: 2
25892-1600: RNCC: 3 | RNVC: 2
25892-1600: RNCC: 5 | RNVC: 9

9 Aug 1982

5340-12-302-7990
Retaining Strap

123027990
YK03610804: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 61 0804: RNCC: 5 | RNVC: 9
03610804: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-322-1330
Helical Compression Spring Seat

123221330
1483203084: RNCC: 3 | RNVC: 2
1483203084: RNCC: 5 | RNVC: 2
1483203084: RNCC: 5 | RNVC: 9

26 Jul 1990

5340-12-352-2945
Mounting Bracket

123522945
T521M1502101: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-312-4609
Door Handle

123124609
4067660101: RNCC: 3 | RNVC: 2

8 Jan 1988

5340-12-345-3148
Nonmetallic Bumper

123453148
H82.008476: RNCC: 3 | RNVC: 2
2.72-37943/4616: RNCC: 5 | RNVC: 2
2.72-37943/4616: RNCC: 5 | RNVC: 2
82.0084.76: RNCC: 5 | RNVC: 9

2 Mar 1998

5340-12-386-1308
Rod End Clevis

123861308
2500262-970642.001.0: RNCC: 2 | RNVC: 2
2500262-970642.001.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-352-5683
Runner

123525683
2.310.261.9: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-135-6502

5340-12-379-4518
Access Cover

123794518
4166 338 226: RNCC: 3 | RNVC: 2

24 Jul 2009

5340-12-391-3656
Mounting Plate

123913656
I010126: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-179-2704
Angle Bracket

121792704
183823681: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-306-2071
Spring Tension Clip

123062071
525465007: RNCC: 3 | RNVC: 2

7 Feb 1986

5340-12-326-0821
Access Cover

123260821
272.360.122: RNCC: 3 | RNVC: 2
272.360 122: RNCC: 5 | RNVC: 9

6 Aug 1991

5340-12-307-7033
Mending Plate

123077033
RP981711: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-315-3016
Angle Bracket

123153016
4232050740: RNCC: 3 | RNVC: 2
423 205 07 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-375-2799
Door Button

123752799
10387R: RNCC: 3 | RNVC: 2
061607: RNCC: 5 | RNVC: 2

14 May 2008

5340-12-364-3916
Handle Grip

123643916
231F06018: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-334-4745
Metallic Solid Wheel

123344745
1673051500: RNCC: 3 | RNVC: 2
16730515: RNCC: 5 | RNVC: 2

13 May 1994

5340-12-165-9420
Helical Compression Spring Seat

121659420
397L59003: RNCC: 3 | RNVC: 2

15 Jul 1976

5340-12-043-9340

5340-12-044-4116

5340-12-374-6241
Angle Bracket

123746241
L630M1001203: RNCC: 3 | RNVC: 2

3 Mar 2008

5340-12-310-0095
Access Cover

123100095
1361013-51073.05: RNCC: 3 | RNVC: 2
1361013-51073-05: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-189-1708
Spring Tension Clip

121891708
23111-1136.01: RNCC: 2 | RNVC: 2
23111-1136.01: RNCC: 3 | RNVC: 2
23111-1136.01: RNCC: 5 | RNVC: 9
23111-1136-01: RNCC: 5 | RNVC: 9

8 Sep 1981

5340-12-702-2436
Mounting Bracket

127022436
VG95211-ML-127022436: RNCC: 2 | RNVC: 2
30.7712.15: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-190-9997
Resilient Mount

121909997
DIN95363-B25X15-NBR45ST: RNCC: 2 | RNVC: 2
1.25.15.3.45NBR/ST: RNCC: 5 | RNVC: 2
1.25.15.3.45NBRST: RNCC: 5 | RNVC: 2
811.010.025.015.06X18.NBR45.ST: RNCC: 5 | RNVC: 2
81110-25X15-M6X20.NBR45.ST: RNCC: 5 | RNVC: 2
20292A/V-BSOX4590: RNCC: 5 | RNVC: 2
20292A/V,NBR45ST: RNCC: 5 | RNVC: 2
0002230265: RNCC: 5 | RNVC: 2
20292A/V-SMX450: RNCC: 5 | RNVC: 9
VG95363-B25X15-NBR45ST: RNCC: 5 | RNVC: 9

5 Jan 1982

5340-12-339-6245
Handwheel

123396245
VG85082-A-160X12: RNCC: 2 | RNVC: 2
9-45024-01-05: RNCC: 5 | RNVC: 2
A160X12VG85082RG5: RNCC: 5 | RNVC: 2
VG85082-A-160X12-RG: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-12-306-0801
Mending Plate

123060801
P-243852-013: RNCC: 3 | RNVC: 2
P243852-013: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-348-0189
Loop Clamp

123480189
DIN3016-1-E2-6-19X15-W1-1-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-06-19X15-W1-1: RNCC: 5 | RNVC: 9

29 Mar 1999

5340-12-354-4379
Loop Clamp

123544379
DIN3015-LC-K-5R-38-PP-W1: RNCC: 2 | RNVC: 2
RAPR1-538: RNCC: 3 | RNVC: 2
552/26: RNCC: 5 | RNVC: 2

12 Jul 2001

5340-12-189-3057
Mounting Bracket

121893057
A10-24-972-55-0: RNCC: 3 | RNVC: 2
A10-24-972-55-0: RNCC: 5 | RNVC: 9
85-800-9159: RNCC: 6 | RNVC: 9

16 Sep 1981

5340-12-701-7119
Loop Clamp

127017119
VG95211-ML-127017119: RNCC: 2 | RNVC: 2
5.12.7601.3120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-3152
Mending Plate

123583152
2500262-192300.002.0: RNCC: 2 | RNVC: 2
2500262-192300.002.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-325-3509
Electrical-Mechanical Equipment Post

123253509
VG95148A5XM2X19,5-AL: RNCC: 2 | RNVC: 2
272.301.891: RNCC: 3 | RNVC: 2
272.301 891: RNCC: 5 | RNVC: 9

28 May 1991

5340-12-145-7886
Nonmetallic Bumper

121457886
837-7X31X22,5N6662.001-22-PUR60: RNCC: 3 | RNVC: 2
5N6662-001-22: RNCC: 5 | RNVC: 2
7-0353-03-00-0: RNCC: 5 | RNVC: 2
7X31X22,5N6662.001-22: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-148-3718
Resilient Mount

121483718
80706801: RNCC: 3 | RNVC: 2
410-314-B-00.05: RNCC: 3 | RNVC: 2
410-314-B-00.05: RNCC: 5 | RNVC: 2
410-314B0005: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-370-7670
Mechanical Stop

123707670
66333493: RNCC: 3 | RNVC: 2
SJ5302 TRANSPARENT: RNCC: 5 | RNVC: 2

19 Dec 2006

5340-12-192-6485
Pad Eye

121926485
4605050140: RNCC: 3 | RNVC: 2

12 May 1982

5340-12-376-9650
Retaining Strap

123769650
6624701740: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-12-318-3328
Angle Bracket

123183328
42207607: RNCC: 3 | RNVC: 2
42207607EC5056-80: RNCC: 5 | RNVC: 2

30 Jun 1989

5340-12-027-1999

5340-12-020-7550

5340-12-331-7503
Access Cover

123317503
52.3109.549.01: RNCC: 2 | RNVC: 2
52.3109.549.01: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-12-393-2852
Double Angle Bracket

123932852
4237 331 033: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-12-378-9228
Mounting Plate

123789228
L533M1239311: RNCC: 3 | RNVC: 2

29 May 2009

5340-12-362-6305
Dust And Moisture Seal Protective Plug

123626305
701845543A: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-341-1130
Lock-Release Lever

123411130
50357: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-12-354-8198
Rod End Connector

123548198
8810700095: RNCC: 2 | RNVC: 2
8810700095: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-136-7718
Retaining Strap

121367718
4048330069: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-317-3577
Angle Bracket

123173577
0224 9412: RNCC: 3 | RNVC: 2

31 Mar 1989

5340-12-195-5422
Resilient Mount

121955422
251411045: RNCC: 3 | RNVC: 9

9 Mar 1983

5340-12-378-0048
Dust And Moisture Seal Protective Cover

123780048
504262574: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-354-4374
Dust And Moisture Seal Protective Cap

123544374
CBD45014P03: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-310-4696
Dust And Moisture Seal Protective Cap-Plug

123104696
610U291: RNCC: 3 | RNVC: 2
GPN610,U291: RNCC: 5 | RNVC: 9
610029100: RNCC: 5 | RNVC: 9

25 May 1987

5340-12-365-2606
Nonmetallic Bumper

123652606
300.028.247: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-326-6773
Mending Plate

123266773
188-27542E: RNCC: 3 | RNVC: 2

18 Oct 1991

5340-12-354-1557
Double Angle Bracket

123541557
506 070 13 40: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-182-3499
Webbing Strap

121823499
2500051-0120.00.0: RNCC: 2 | RNVC: 2
82300-2500051-0120.00.0: RNCC: 3 | RNVC: 2
2500051-0120.00.0: RNCC: 3 | RNVC: 2
2500051-0120-00-0: RNCC: 5 | RNVC: 2
2500051-0120-00-0: RNCC: 5 | RNVC: 9

28 Jan 1980

5340-12-337-6802
Double Angle Bracket

123376802
E-5074-403-32: RNCC: 3 | RNVC: 2
E5074-403-32: RNCC: 5 | RNVC: 2

27 Mar 1995

5340-12-324-0617
Resilient Mount

123240617
4604100347: RNCC: 3 | RNVC: 2
544241: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-12-011-4051

5340-12-701-4768
Loop Clamp

127014768
VG95211-ML-127014768: RNCC: 2 | RNVC: 2
5.12.5811.1000.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-3269
Butt Hinge Leaf

123143269
9843595: RNCC: 3 | RNVC: 2
2300194-181510.000: RNCC: 5 | RNVC: 9
2300194-181510.000: RNCC: 5 | RNVC: 9
9843595: RNCC: 5 | RNVC: 9

25 Jun 1988

5340-12-319-5052
Access Cover

123195052
4900059-751790.016.0: RNCC: 3 | RNVC: 2
1227976: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-380-5853
Runner

123805853
500100-5: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-12-329-2199
Dust And Moisture Seal Protective Cap

123292199
B3687141-A: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-12-174-6854
Clamp Bolt Assembly

121746854
V3SD 18105-4: RNCC: 3 | RNVC: 2
V3SD18105-4: RNCC: 5 | RNVC: 2

19 Jul 1978

5340-12-343-4296
Mounting Plate

123434296
102540/1: RNCC: 3 | RNVC: 2
80996070100: RNCC: 5 | RNVC: 2

19 Jun 1997

5340-12-310-4422
Handle Grip

123104422
4-172012: RNCC: 3 | RNVC: 2
471560: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-339-6966
Turnbuckle

123396966
8629.5.92.00: RNCC: 3 | RNVC: 2
115670: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-164-5290
Loop Clamp

121645290
6 110 315 030: RNCC: 3 | RNVC: 2
6110315030: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-6807
Angle Bracket

123586807
2481-392000.012.0: RNCC: 2 | RNVC: 2
2481-392000.012.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-302-7863
Angle Bracket

123027863
CF 339 481 B: RNCC: 3 | RNVC: 2
CF 339 481 B: RNCC: 5 | RNVC: 2
CF 339 481 A: RNCC: 5 | RNVC: 9
CF 339 481 A: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-337-9216
Metallic Solid Wheel

123379216
1-A-117: RNCC: 3 | RNVC: 2
910.000.8332: RNCC: 5 | RNVC: 2

3 May 1995

5340-12-302-7875
Webbing Strap

123027875
CF 491 136 -U: RNCC: 3 | RNVC: 2
CF 491 136 -U: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-320-3895
Bridge Clamp

123203895
8-4000.07: RNCC: 2 | RNVC: 2
8-4000.07: RNCC: 3 | RNVC: 2
8-4000.07: RNCC: 5 | RNVC: 9

9 Jan 1990

5340-12-330-1671
Dust And Moisture Seal Boot

123301671
M384L: RNCC: 3 | RNVC: 2
62338.112.050: RNCC: 5 | RNVC: 2
631.381.31K003: RNCC: 5 | RNVC: 2

11 Nov 1992

5340-12-312-7925
Access Cover

123127925
1069546: RNCC: 2 | RNVC: 2
1069546: RNCC: 3 | RNVC: 2

5 Feb 1988

5340-12-314-1227
Dust And Moisture Seal Protective Cap

123141227
3169880035: RNCC: 3 | RNVC: 2
316 988 00 35: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-328-6611
Dust And Moisture Seal Boot

123286611
311971907: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-183-1262
Antipilferage Seal

121831262
R23107: RNCC: 3 | RNVC: 2
R23107: RNCC: 5 | RNVC: 9

20 Mar 1980

5340-12-179-5500
Dust And Moisture Seal Protective Cap-Plug

121795500
900A12: RNCC: 3 | RNVC: 2
A12GPN900: RNCC: 5 | RNVC: 2
GPN900,A12: RNCC: 5 | RNVC: 2
GPN900A12: RNCC: 5 | RNVC: 2
900001200: RNCC: 5 | RNVC: 2
A12: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-324-7661
Webbing Strap

123247661
2500171-422200.00: RNCC: 2 | RNVC: 2
2500171-422200.00: RNCC: 3 | RNVC: 2
2500171-422200.00: RNCC: 3 | RNVC: 2
2500171-422200.00: RNCC: 5 | RNVC: 2

22 Mar 1991

5340-12-351-4994
Mounting Plate

123514994
0004610043: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-193-7315
Nonmetallic Bumper

121937315
MA2120749: RNCC: 3 | RNVC: 2
A509050: RNCC: 5 | RNVC: 2
GMA2120749P1: RNCC: 5 | RNVC: 2

25 Aug 1982

5340-12-390-6050
Bumper

123906050
509168: RNCC: 3 | RNVC: 2
7099749: RNCC: 5 | RNVC: 2

27 Nov 2012

5340-12-394-2764
Hand Crank

123942764
6819050001: RNCC: 3 | RNVC: 2

18 Nov 2013

5340-12-180-9070
Mounting Bracket

121809070
88658804003: RNCC: 3 | RNVC: 2
88.65880.4003: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-347-8516
Mounting Plate

123478516
83 501 1057: RNCC: 3 | RNVC: 2

23 Feb 1999

5340-12-356-0911
Mounting Bracket

123560911
6020160138: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-382-4044
Cushioning Pad

123824044
2000331: RNCC: 3 | RNVC: 2
SK778M6-236000.010.0: RNCC: 5 | RNVC: 2
4617570196: RNCC: 5 | RNVC: 2

16 Jun 2010

5340-12-170-6997
Resilient Mount

121706997
155007-5,1-HD.AL/AM-40: RNCC: 3 | RNVC: 2
GE21-03-5 HDS: RNCC: 5 | RNVC: 2
VG95406-A1-1-Q-H: RNCC: 5 | RNVC: 9
VG95406-A1-1Q-H-AL-NMST: RNCC: 5 | RNVC: 9

28 Jul 1977

5340-12-314-6412
Double Angle Bracket

123146412
2300109-250000.041.0: RNCC: 2 | RNVC: 2
2300109-250000.041.0: RNCC: 3 | RNVC: 2

23 Jul 1988

5340-12-377-3666
Angle Bracket

123773666
8605059.1.091.00: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-310-8743
Manual Control Handle

123108743
6/501A/6: RNCC: 3 | RNVC: 2

3 Jul 1987

5340-12-313-5518
Angle Bracket

123135518
5800046-9390.03: RNCC: 2 | RNVC: 2
5800046-9390.03: RNCC: 3 | RNVC: 2
5800046-9390.03: RNCC: 5 | RNVC: 9
5800046-9390.03: RNCC: 5 | RNVC: 9

15 Apr 1988

5340-12-174-0429
Pipe Bracket

121740429
9827C: RNCC: 3 | RNVC: 2
N3201: RNCC: 5 | RNVC: 2

31 May 1978

5340-12-376-3255
Dust And Moisture Seal Protective Cap

123763255
8695720572: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-12-328-9096
Loop Clamp

123289096
2653-330140.00: RNCC: 2 | RNVC: 2
2653-330140.00: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-337-3071
Angle Bracket

123373071
04008100: RNCC: 3 | RNVC: 2

14 Feb 1995

5340-12-133-1420

5340-12-162-1952
Handle Grip

121621952
27200FZKN6590: RNCC: 3 | RNVC: 2
S000660000000: RNCC: 5 | RNVC: 2
S000660000000000: RNCC: 5 | RNVC: 2
06 60 000 000: RNCC: 5 | RNVC: 2
0660000000: RNCC: 5 | RNVC: 2
660 000: RNCC: 5 | RNVC: 2
660000000: RNCC: 5 | RNVC: 2
B 5737: RNCC: 5 | RNVC: 2
BDIN73483: RNCC: 5 | RNVC: 9
DIN73483-B: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-369-6312
Mounting Bracket

123696312
C18 742 0304: RNCC: 3 | RNVC: 2
18 742 0304: RNCC: 5 | RNVC: 2
187420304: RNCC: 5 | RNVC: 2

3 Aug 2006

5340-12-378-3665
Angle Bracket

123783665
41040144: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-199-8033
Retaining Band

121998033
820589203100: RNCC: 3 | RNVC: 2

31 May 1984

5340-12-189-6709
Nonmetallic Bumper

121896709
52-59538-4: RNCC: 3 | RNVC: 2

12 Oct 1981

5340-12-317-2534
Angle Bracket

123172534
CF 446 894: RNCC: 3 | RNVC: 2
CF 446 894: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-325-6560
Angle Bracket

123256560
3053320040: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-182-6479
Webbing Strap

121826479
5800133-21: RNCC: 2 | RNVC: 2
5800133-21: RNCC: 3 | RNVC: 2
5800133-21: RNCC: 5 | RNVC: 9
5800133-21: RNCC: 5 | RNVC: 9
000-D2-20X2,0X340-PE-RAL6031: RNCC: 6 | RNVC: 9

20 Feb 1980

5340-12-354-8283
Dust And Moisture Seal Protective Cap-Plug

123548283
5.075-017.0: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-351-7595
Dust And Moisture Seal Protective Plug

123517595
5.394-047: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-701-6533
Angle Bracket

127016533
VG95211-ML-127016533: RNCC: 2 | RNVC: 2
5.12.7207.1091.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-9908
Loop Clamp

127019908
VG95211-ML-127019908: RNCC: 2 | RNVC: 2
155N464-159: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-143-8316
Retaining Strap

121438316
DIN1593-19ZN: RNCC: 2 | RNVC: 2
DIN1593-19ZN: RNCC: 3 | RNVC: 2
DIN1593-19ZN: RNCC: 3 | RNVC: 2
DIN1593-19ZN: RNCC: 5 | RNVC: 2
DIN1593-19BK: RNCC: 5 | RNVC: 9
001593019000: RNCC: 5 | RNVC: 9
19DIN1593: RNCC: 5 | RNVC: 9
DIN1593-19: RNCC: 5 | RNVC: 9
DIN1593-19BK: RNCC: 5 | RNVC: 9
DIN1593-19: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6323
Mounting Plate

127016323
VG95211-ML-127016323: RNCC: 2 | RNVC: 2
5.12.7060.1070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-8638
Access Cover

123598638
2500261-183591.000.0: RNCC: 2 | RNVC: 2
2500261-183591.000.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-306-6612
Mending Plate

123066612
704-152320-000-8: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-319-8973
Nonmetallic Bumper

123198973
503487: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-12-366-0518
Dust And Moisture Seal Protective Plug

123660518
0009980221: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-326-9155
Nonmetallic Bumper

123269155
395944319: RNCC: 3 | RNVC: 2

8 Nov 1991

5340-12-302-1840
Resilient Mount

123021840
6202400317: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-042-4739

5340-12-010-7690

5340-12-342-6124
Mounting Bracket

123426124
4240619929: RNCC: 3 | RNVC: 2
4240019929: RNCC: 5 | RNVC: 2

6 Mar 1997

5340-12-351-9855
Mounting Bracket

123519855
5620004: RNCC: 3 | RNVC: 2

25 Sep 2000

5340-12-364-3831
Webbing Strap

123643831
42.050.018: RNCC: 3 | RNVC: 9

17 Sep 2004

5340-12-364-1551
Mortise Lock

123641551
501396: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-011-5301

5340-12-386-1051
Mending Plate

123861051
06998771: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-379-4376
Dust And Moisture Seal Protective Plug

123794376
4639870044: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-393-5736
Manual Control Handle

123935736
7187184: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-328-9172
Metallic Bumper

123289172
52.3108.815.00: RNCC: 2 | RNVC: 2
52.3108.815.00: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-132-2411

5340-12-193-8603
Slide Keeper

121938603
16106-2000.05: RNCC: 3 | RNVC: 2

7 Sep 1982

5340-12-368-4944
Helical Compression Spring Seat

123684944
M662105: RNCC: 3 | RNVC: 9

16 Mar 2006

5340-12-365-8616
Mounting Plate

123658616
S259M7030210: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-154-5593
Spring Tension Clip

121545593
W41257U6000B1: RNCC: 3 | RNVC: 2
W41257-U6000-B1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-1332
Angle Bracket

123261332
272.419.259: RNCC: 3 | RNVC: 2
272.419 259.EZ-3: RNCC: 5 | RNVC: 2
272.419259: RNCC: 5 | RNVC: 9

12 Aug 1991

5340-12-329-9847
Retaining Strap

123299847
4616710716: RNCC: 3 | RNVC: 2

17 Oct 1992

5340-12-366-2194
Angle Bracket

123662194
060031: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-12-300-9159
Door Button

123009159
66.3523.370.03-A001: RNCC: 3 | RNVC: 2
206860: RNCC: 5 | RNVC: 2

12 Sep 1984

5340-12-044-0852

5340-12-306-0898
Angle Bracket

123060898
5801611-737000.02: RNCC: 2 | RNVC: 2
5801611-737000.02: RNCC: 3 | RNVC: 2
5801611-737000.02: RNCC: 5 | RNVC: 9
5801611-737000.02: RNCC: 5 | RNVC: 9

27 Jan 1986

5340-12-351-0467
Mounting Bracket

123510467
7802494685: RNCC: 3 | RNVC: 2
78024 94685: RNCC: 5 | RNVC: 9

19 Jun 2000

5340-12-050-0048

5340-12-344-3167
Multiple Angle Bracket

123443167
111G10010: RNCC: 3 | RNVC: 2
111 G10 010 E1: RNCC: 5 | RNVC: 2

15 Oct 1997

5340-12-379-3923
Door Handle Unit

123793923
209083: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-368-0744
Angle Bracket

123680744
2300491-240000.001.0: RNCC: 2 | RNVC: 2
2300491-240000.001.0: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-310-3323
Mending Plate

123103323
DKAV004: RNCC: 3 | RNVC: 2
DK AV 004: RNCC: 5 | RNVC: 2

11 May 1987

5340-12-333-6565
Rod End Clevis

123336565
105-40126.07: RNCC: 3 | RNVC: 2

18 Jan 1994

5340-12-354-8313
Rim Latch

123548313
244.20.139: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-321-9121
Angle Bracket

123219121
0555201: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-311-2291
Schlosz Schluessel

123112291
1017-S: RNCC: 3 | RNVC: 9

6 Aug 1987

5340-12-334-4905
Lock-Release Lever

123344905
1796737900: RNCC: 3 | RNVC: 2
17967379: RNCC: 5 | RNVC: 2

16 May 1994

5340-12-319-7364
Resilient Mount

123197364
61000: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-12-175-1280
Nonmetallic Bumper

121751280
1089870140: RNCC: 3 | RNVC: 2
1089870140: RNCC: 5 | RNVC: 2

28 Aug 1978

5340-12-372-8584
Spacing Threaded Standoff

123728584
4457047: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-12-314-5094
Rod End Clevis

123145094
1200096-15B800004: RNCC: 2 | RNVC: 2

14 Jul 1988

5340-12-380-4334
Section Block Clamp

123804334
105-60501.17: RNCC: 3 | RNVC: 2

29 Oct 2009

5340-12-365-2764
Butt Hinge

123652764
2189206: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-392-9930
Dust And Moisture Seal Protective Cap

123929930
800363: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-12-321-4660
Angle Bracket

123214660
1207301: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-330-3434
Protection Bellows

123303434
345059: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-12-370-7390
Loop Clamp

123707390
353 6337-802: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-12-361-4935
Mounting Bracket

123614935
1504291: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-357-0238
Dust And Moisture Seal Protective Cap-Plug

123570238
610U10RAL3000: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-359-2454
Turnbuckle

123592454
VS8550G025: RNCC: 3 | RNVC: 2
VS8550G025: RNCC: 5 | RNVC: 9

15 Jan 2003

5340-12-376-2583
Pad Eye

123762583
1X56 137 017: RNCC: 3 | RNVC: 2

2 Sep 2008

5340-12-355-4251
Webbing Strap

123554251
4617901579: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-342-8679
Strap Fastener Loop

123428679
46198850836431: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-12-357-3871
Mounting Bracket

123573871
151-2303.03: RNCC: 3 | RNVC: 2

14 Jun 2002

5340-12-359-7336
Mounting Bracket

123597336
S281M3039101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-369-8812
Mounting Bracket

123698812
30296745: RNCC: 2 | RNVC: 2
30296745: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-173-0751
Clamping Catch

121730751
6020191: RNCC: 3 | RNVC: 2
602A516: RNCC: 5 | RNVC: 2
81.97101.0012: RNCC: 5 | RNVC: 2
81971010012: RNCC: 5 | RNVC: 2
2008014: RNCC: 5 | RNVC: 2
8414342: RNCC: 5 | RNVC: 2
5000274498: RNCC: 5 | RNVC: 2
10006872-03: RNCC: 5 | RNVC: 2
5000274498: RNCC: 5 | RNVC: 9

20 Mar 1978

5340-12-157-7962
Spring Tension Clip

121577962
5800820-149.003: RNCC: 3 | RNVC: 2
C42117-A222-C999: RNCC: 5 | RNVC: 2
5800820-149-003: RNCC: 5 | RNVC: 9
C42117A222C999: RNCC: 5 | RNVC: 9
5800820-149-003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-3992
Rigid Caster

123833992
BK-KSBV-125GL: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-12-365-6338
Angle Bracket

123656338
J53230946-402: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-186-1469
Access Cover

121861469
512206-0239-000: RNCC: 3 | RNVC: 2
512206-0239.000: RNCC: 3 | RNVC: 2
512206-0239: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-352-6115
Door Button

123526115
3111-0001: RNCC: 2 | RNVC: 2
3111-0001: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-183-2552
Wood Runner

121832552
56-0049-410-01: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-309-1634
Access Cover

123091634
KM.S01-140100.010: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-327-0480
Spring Loaded Cylinder Fastener

123270480
7500.994.3: RNCC: 3 | RNVC: 2

25 Nov 1991

5340-12-185-4411
Double Angle Bracket

121854411
CF 407 135 -X: RNCC: 2 | RNVC: 2
CF 407 135 -X: RNCC: 3 | RNVC: 2
CF4071350X: RNCC: 5 | RNVC: 2
CF 407 135 -X: RNCC: 5 | RNVC: 2
CF4071350X: RNCC: 5 | RNVC: 2
CF4071350X: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-360-1433
Bow Handle

123601433
1.63.0422.0: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-387-1688
Access Door Hinge

123871688
0.54.0156.0: RNCC: 3 | RNVC: 2

11 Nov 2011

5340-12-164-4548
Retaining Strap

121644548
4039950220: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-150-8325
Resilient Mount

121508325
8332230712: RNCC: 1 | RNVC: 2
8332230712: RNCC: 3 | RNVC: 2
8332230712: RNCC: 3 | RNVC: 2
0050060005: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-5164
Nonmetallic Bumper

121865164
1803510048: RNCC: 3 | RNVC: 2

12 Jan 1981

5340-12-327-9062
Nonmetallic Bumper

123279062
A11A742420113: RNCC: 3 | RNVC: 2

18 Mar 1992

5340-12-184-7235
Door Handle

121847235
CF429244CR: RNCC: 3 | RNVC: 2
CF 429 244 CR: RNCC: 5 | RNVC: 2
CF429244CR: RNCC: 5 | RNVC: 2
CF 429 244 CR: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-327-6090
Bow Handle

123276090
11227901700: RNCC: 3 | RNVC: 2

6 Feb 1992

5340-12-148-5811
Hand Crank

121485811
A040805: RNCC: 3 | RNVC: 2
A040805: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-4605
Nonmetallic Solid Wheel

123134605
2300013-5530.07: RNCC: 2 | RNVC: 2
2300013-5530.07: RNCC: 3 | RNVC: 2
2300013-5530.07: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-027-8659

5340-12-363-4686
Angle Bracket

123634686
J21520167-401: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-372-0583
Mounting Bracket

123720583
15004042: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-324-7018
Spring Tension Clip

123247018
362.115: RNCC: 3 | RNVC: 2

18 Mar 1991

5340-12-306-5897
Nonmetallic Bumper

123065897
043048: RNCC: 3 | RNVC: 9
000 323 16 44: RNCC: 5 | RNVC: 2

12 Mar 1986

5340-12-179-2440
Mounting Bracket

121792440
2577501: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-041-5763

5340-12-360-6615
Mounting Plate

123606615
702-731200-903-0: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-12-388-1314
Loop Clamp

123881314
10124-207000.001.0: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-328-9225
Mounting Bracket

123289225
2906398M1: RNCC: 3 | RNVC: 2
395948128: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-094-6268

5340-12-377-1658
Mounting Bracket

123771658
41269066: RNCC: 3 | RNVC: 2

15 Dec 2008

5340-12-321-1218
Bow Handle

123211218
9000 2061: RNCC: 3 | RNVC: 2

29 Mar 1990

5340-12-389-0987
Helical Compression Spring Seat

123890987
8490740610: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-389-2071
Mortise Lock

123892071
110231: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-022-7002

5340-12-167-5451
Angle Bracket

121675451
3575521: RNCC: 3 | RNVC: 2
2865-1252-10: RNCC: 5 | RNVC: 2
3575521: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-700-9020
Loop Clamp

127009020
VG95211-ML-127009020: RNCC: 2 | RNVC: 2
2.11.6100.8050.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-312-5080
Double Angle Bracket

123125080
P-085017-018: RNCC: 3 | RNVC: 2
P085017-018: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-341-8163
Spring Tension Clip

123418163
042 676: RNCC: 3 | RNVC: 2
042676: RNCC: 5 | RNVC: 2
1-902-12-4: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-12-701-3588
Rod End Connector

127013588
VG95211-ML-127013588: RNCC: 2 | RNVC: 2
5.12.5111.5560.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-1865
Mounting Bracket

127021865
VG95211-ML-127021865: RNCC: 2 | RNVC: 2
30.7206.97.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-381-8359
Bow Handle

123818359
GN667-30-350-SW: RNCC: 3 | RNVC: 2
25271: RNCC: 5 | RNVC: 2
GN667-30-350-SM: RNCC: 5 | RNVC: 9

8 Apr 2010

5340-12-352-2602
Dust And Moisture Seal Protective Cover

123522602
6700017-201200.00: RNCC: 2 | RNVC: 2
6700017-201200.00: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-365-9263
Retaining Bail

123659263
537237-0064.000: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-355-9502
Mending Plate

123559502
J92220534-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-357-4928
Multiple Eye Pad

123574928
A-087118-065: RNCC: 3 | RNVC: 2
A087118-065: RNCC: 5 | RNVC: 2

26 Jun 2002

5340-12-171-2779
Loop Clamp

121712779
SP4119.71/15-W5: RNCC: 3 | RNVC: 2
0047-707: RNCC: 5 | RNVC: 2
0047707: RNCC: 5 | RNVC: 2
8441960: RNCC: 5 | RNVC: 2
1414119073: RNCC: 5 | RNVC: 2
SP4119-71-15-1-4571: RNCC: 5 | RNVC: 2
SP4119.71/15-1.4571: RNCC: 5 | RNVC: 2

26 Sep 1977

5340-12-701-5887
Loop Clamp

127015887
VG95211-ML-127015887: RNCC: 2 | RNVC: 2
5.12.6501.0171.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-390-8732
Webbing Strap

123908732
176637-L=600: RNCC: 3 | RNVC: 2
7112193: RNCC: 5 | RNVC: 2

21 Dec 2012

5340-12-148-9185
Spring Tension Clip

121489185
2360-261140.02.0: RNCC: 2 | RNVC: 2
2360-261140.02.0: RNCC: 3 | RNVC: 2
2360-261140.02.0: RNCC: 5 | RNVC: 2
2360-261140.02.0: RNCC: 5 | RNVC: 2
2360-261140-02-0: RNCC: 5 | RNVC: 2
HT15/4891/01: RNCC: 5 | RNVC: 9
2360-261140-02-0: RNCC: 5 | RNVC: 9
2360-261140.02.0: RNCC: 5 | RNVC: 9
2360-261140.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-6694
Bridge Clamp

121686694
23176-208232-00-0: RNCC: 2 | RNVC: 2
23176-208232-00-0: RNCC: 5 | RNVC: 2
23176-208232.00.0: RNCC: 5 | RNVC: 9

28 Mar 1977

5340-12-315-7456
Dust And Moisture Seal Protective Cap

123157456
MD-019-5-74-KU: RNCC: 3 | RNVC: 2
LP-019-5-74-KU: RNCC: 3 | RNVC: 2
LP/MD-019-5-00000-74: RNCC: 5 | RNVC: 2
LP/MD-019-5-74-KU: RNCC: 5 | RNVC: 2
MD-019-5-00000-74-0-KU: RNCC: 5 | RNVC: 2
LP-019-5-00000-74-0-KU: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-701-7052
Angle Bracket

127017052
VG95211-ML-127017052: RNCC: 2 | RNVC: 2
5.12.7240.2520.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-388-3851
Access Door Hinge

123883851
SK1239-187285.000.0: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-393-0292
Shelf Bracket

123930292
1030139-750026.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-393-6543
Mounting Plate

123936543
4100098-723100.004.0: RNCC: 2 | RNVC: 2
4100098-723100.004.0: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-12-358-9305
Angle Bracket

123589305
2500262-394300.027.0: RNCC: 2 | RNVC: 2
2500262-394300.027.0: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-328-9244
Mounting Plate

123289244
23305-311012.00.0: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-337-7829
Runner

123377829
4606730228: RNCC: 3 | RNVC: 2
4606730228: RNCC: 5 | RNVC: 2
2.-03.145.03/.4: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-12-354-2732
Mechanical Stop

123542732
1658-382000.002.0: RNCC: 2 | RNVC: 2
1658-382000.002.0: RNCC: 3 | RNVC: 2

26 Jun 2001

5340-12-372-9650
Split Tubular Clip

123729650
MM 9221 T 018: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-12-362-6649
Mounting Plate

123626649
2500262-830041.000.0: RNCC: 2 | RNVC: 2
2500262-830041.000.0: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-192-6471
Retaining Band

121926471
4604700140: RNCC: 3 | RNVC: 2
721 1 49 026 2: RNCC: 5 | RNVC: 9

12 May 1982

5340-12-325-6242
Mounting Plate

123256242
5801984-983110.001.0: RNCC: 2 | RNVC: 2
5801984-983110.001.0: RNCC: 3 | RNVC: 2
5801984-983110.001.0: RNCC: 5 | RNVC: 2

24 Jun 1991

5340-12-375-5748
Pad Eye

123755748
S259M6056216: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-12-359-5376
Mounting Bracket

123595376
T622P3004101: RNCC: 3 | RNVC: 2
T622P3004101: RNCC: 5 | RNVC: 9

14 Feb 2003

5340-12-356-6414
Double Angle Bracket

123566414
54.1315.230.08: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-132-7356
Retaining Strap

121327356
177M27011: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-386-9449
Mounting Bracket

123869449
X00019568: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-364-4780
Leather Strap

123644780
T251M3001222: RNCC: 2 | RNVC: 2
T251M3001222: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-364-2855
Mounting Plate

123642855
T661P1002221: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-365-0676
Angle Bracket

123650676
4635458840: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-171-1329
Resilient Mount

121711329
E1E 2059S 38: RNCC: 3 | RNVC: 2
E1E2059S38: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-122-1020

5340-12-168-2819
Elastic Cord Assembly

121682819
81968060004: RNCC: 3 | RNVC: 2
81.96806-0004: RNCC: 5 | RNVC: 2
81.96806.0004: RNCC: 5 | RNVC: 2

4 Mar 1977

5340-12-164-5705
Bow Handle

121645705
62.6581.020.19-A001: RNCC: 3 | RNVC: 2
200552: RNCC: 5 | RNVC: 2
62-6581-020-19: RNCC: 5 | RNVC: 2
62-6581-020-19A001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9914
Loop Clamp

127019914
VG95211-ML-127019914: RNCC: 2 | RNVC: 2
155N464-270: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-126-7078
Rod End Clevis

121267078
DIN71752-G10X40-9SMNPB28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G10X40-10S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G10X40-9SMN28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G10X40-10S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G10X40-10S20K-A3P: RNCC: 3 | RNVC: 2
100200100040/024-10S20K: RNCC: 5 | RNVC: 2
G10X40DIN71752-10S20K: RNCC: 5 | RNVC: 2
DIN71752-G10X40-10S20K: RNCC: 5 | RNVC: 9
G10X40DIN71752-10S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-1915
Spring Loaded Cylinder Fastener

123931915
03092-01410: RNCC: 3 | RNVC: 2
7135848: RNCC: 5 | RNVC: 2

15 Aug 2013

5340-12-318-0884
Hand Crank

123180884
JS1118-03: RNCC: 3 | RNVC: 2
JS 1118-03X: RNCC: 5 | RNVC: 2
JS1113-01: RNCC: 5 | RNVC: 2
JS1118-03: RNCC: 5 | RNVC: 2

9 Jun 1989

5340-12-314-9162
Electrical-Mechanical Equipment Post

123149162
VG95148B8XM4X10-NRST: RNCC: 2 | RNVC: 2
VG95148B8XM4X10-NRST: RNCC: 3 | RNVC: 2
C121-A44-C2: RNCC: 5 | RNVC: 2

26 Aug 1988

5340-12-301-8886
Lock-Release Lever

123018886
20-5220-096: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-196-6497
Ball Socket Seat

121966497
Z2297-02M10002T19: RNCC: 3 | RNVC: 9

27 Jul 1983

5340-12-124-1224
Spring Tension Clip

121241224
020-0050-024-008: RNCC: 3 | RNVC: 2
0200050024008: RNCC: 5 | RNVC: 2
51158302: RNCC: 5 | RNVC: 2
0009940960: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-1182
Loop Clamp

127011182
VG95211-ML-127011182: RNCC: 2 | RNVC: 2
4727A-18-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-1710
Angle Bracket

127021710
VG95211-ML-127021710: RNCC: 2 | RNVC: 2
30.7117.120: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-355-7147
Mounting Bracket

123557147
2125-121200A04B: RNCC: 2 | RNVC: 2
2125-121200A04B: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-12-186-9614
Electrical-Mechanical Equipment Post

121869614
5802206-150000-003: RNCC: 2 | RNVC: 2
535.7106: RNCC: 3 | RNVC: 2
5357106: RNCC: 5 | RNVC: 2

23 Feb 1981

5340-12-011-5777

5340-12-377-2909
Spring Tension Clip

123772909
99456782: RNCC: 3 | RNVC: 2

2 Jan 2009

5340-12-383-9947
Retaining Strap

123839947
7115377: RNCC: 3 | RNVC: 2
1380010: RNCC: 5 | RNVC: 2

7 Jan 2011

5340-12-390-1428
Mounting Bracket

123901428
T439M4010101: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-12-378-2840
Cane Bolt

123782840
640.220.000: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-12-368-6992
Bow Handle

123686992
250.1394: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-12-321-3567
Mounting Bracket

123213567
9000 2307: RNCC: 3 | RNVC: 2

9 May 1990

5340-12-374-4115
Loop Clamp

123744115
5581837: RNCC: 2 | RNVC: 2
5581837: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-12-349-8842
Angle Bracket

123498842
54.1038.035.05: RNCC: 2 | RNVC: 2
54.1038.035.05: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-315-1113
Mending Plate

123151113
5500110340: RNCC: 3 | RNVC: 2
5500110340: RNCC: 5 | RNVC: 2
5500110340: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-377-1731
Mounting Bracket

123771731
41271331: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-319-6157
Double Angle Bracket

123196157
0240 6307: RNCC: 3 | RNVC: 2
2406307EE0147-EE: RNCC: 5 | RNVC: 2
02406307: RNCC: 5 | RNVC: 2

18 Oct 1989

5340-12-137-0034

5340-12-319-8142
Webbing Strap

123198142
AFG0530559: RNCC: 3 | RNVC: 2
0530559: RNCC: 5 | RNVC: 2

7 Nov 1989

5340-12-317-9609
Mounting Bracket

123179609
7118901: RNCC: 3 | RNVC: 2

30 May 1989

5340-12-359-4967
Loop Clamp

123594967
289.02.075: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-313-3433
Dust And Moisture Seal Protective Plug

123133433
25N15042: RNCC: 3 | RNVC: 2
915042025003: RNCC: 5 | RNVC: 2
915042 025003: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-340-4129
Angle Bracket

123404129
182314303: RNCC: 3 | RNVC: 2
E 18 231 4303: RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-344-4197
Mending Plate

123444197
111G08015: RNCC: 3 | RNVC: 2
111 G08 015: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-172-8257
Dust And Moisture Seal Protective Plug

121728257
WFGST10: RNCC: 3 | RNVC: 2

22 Feb 1978

5340-12-358-9209
Double Angle Bracket

123589209
3852953240: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-391-5982
Mounting Bracket

123915982
S252M3178106: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-317-2505
Angle Bracket

123172505
2606411: RNCC: 3 | RNVC: 2

21 Mar 1989

5340-12-391-4781
Butt Hinge Leaf

123914781
I009891TAN686A: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-348-6848
Runner

123486848
306188: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-394-5379
Mechanical Stop

123945379
4052063128814: RNCC: 3 | RNVC: 2
I012340: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-010-8468

5340-12-700-1840
Resilient Mount

127001840
151-AV10-K: RNCC: 2 | RNVC: 2

30 Oct 1991

5340-12-702-1658
Angle Bracket

127021658
VG95211-ML-127021658: RNCC: 2 | RNVC: 2
30.7100.1251: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-8039
Angle Bracket

123388039
6700017-202320.03: RNCC: 2 | RNVC: 2
6700017-202320.03: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-701-4918
Mounting Plate

127014918
VG95211-ML-127014918: RNCC: 2 | RNVC: 2
5.12.5850.0105.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-9223
Angle Bracket

127029223
VG95211-ML-127029223: RNCC: 2 | RNVC: 2
5.12.7040.1150.00: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-330-5897
Loop Clamp

123305897
4.041-009: RNCC: 2 | RNVC: 2
4.041-009.0: RNCC: 3 | RNVC: 2
4.041-009: RNCC: 5 | RNVC: 9

13 Jan 1993

5340-12-702-4507
Mounting Bracket

127024507
VG95211-ML-127024507: RNCC: 2 | RNVC: 2
5.51.0602.1503.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-8417
Loop Clamp

123608417
RBN 3-216: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-12-701-2680
Mounting Bracket

127012680
VG95211-ML-127012680: RNCC: 2 | RNVC: 2
5.12.4805.0170.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-161-2585
Support Hook

121612585
160-73214-13: RNCC: 3 | RNVC: 2
160-73214-13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-0870
Door Handle

123550870
8120-0025: RNCC: 2 | RNVC: 2
8120-0025: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-12-164-9179
Dust And Moisture Seal Protective Plug

121649179
681-26000-10: RNCC: 3 | RNVC: 2
681-26000-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-388-9608
Mechanical Stop

123889608
H1.1784-47-01-30.00-07: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-351-7659
Webbing Strap

123517659
79671-0005: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-356-6212
Double Angle Bracket

123566212
160-773107-02: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-183-5818
Angle Bracket

121835818
1000093-30000.13.0: RNCC: 2 | RNVC: 2
1000093-30000.13.0: RNCC: 3 | RNVC: 2
1000093-30000-13-0: RNCC: 5 | RNVC: 2
1000093-30000-13-0: RNCC: 5 | RNVC: 9
1000093-30000.13.0: RNCC: 5 | RNVC: 9

3 May 1980

5340-12-316-6290
Padlock

123166290
55/35 MM: RNCC: 3 | RNVC: 2
K 01.0310.31: RNCC: 5 | RNVC: 2
55/35MM: RNCC: 5 | RNVC: 2
01.0310.31: RNCC: 5 | RNVC: 2

30 Jan 1989

5340-12-197-7687
Angle Bracket

121977687
A-145401-010: RNCC: 3 | RNVC: 2
A145401-010: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-319-7795
Mounting Bracket

123197795
3818110026: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-12-348-7433
Angle Bracket

123487433
5900984339: RNCC: 3 | RNVC: 2
5900984339: RNCC: 5 | RNVC: 2
5900984339: RNCC: 5 | RNVC: 2

12 Aug 1999

5340-12-320-5947
Helical Compression Spring Seat

123205947
823711643A: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-12-176-9520
Mounting Bracket

121769520
6302638: RNCC: 3 | RNVC: 2

3 Jan 1979

5340-12-386-7426
Mortise Latch Set

123867426
62.107.000: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-393-7340
Rod End Connector

123937340
H22355: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-318-4298
Retaining Band

123184298
81974605165: RNCC: 3 | RNVC: 2
81.97460.5165: RNCC: 5 | RNVC: 2

13 Jul 1989

5340-12-367-1839
Strap Hinge

123671839
26989: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-12-323-5433
Lock-Release Lever

123235433
211308-4006: RNCC: 3 | RNVC: 2

6 Dec 1990

5340-12-340-1368
Double Angle Bracket

123401368
726 22921 ABAA: RNCC: 3 | RNVC: 2
726 22921 ABAA-HDQA: RNCC: 5 | RNVC: 2

5 Mar 1996

5340-12-356-0884
Angle Bracket

123560884
J92228891-001: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-300-7732
Pad Eye

123007732
537176-0306.000: RNCC: 3 | RNVC: 2
53 71 76-0306: RNCC: 5 | RNVC: 9
53 71 76-0306: RNCC: 5 | RNVC: 9
537176-0306: RNCC: 5 | RNVC: 9
537176-0306.000: RNCC: 5 | RNVC: 9

29 Aug 1984

5340-12-172-1709
Bow Handle

121721709
256-180: RNCC: 3 | RNVC: 2

27 Dec 1977

5340-12-328-9422
Handwheel

123289422
347-153-031: RNCC: 2 | RNVC: 2
347-153-031: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-314-5441
Angle Bracket

123145441
4354265540: RNCC: 3 | RNVC: 2
435 426 55 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-354-1210
Dust And Moisture Seal Protective Plug

123541210
300F33: RNCC: 3 | RNVC: 2
GPN300F33: RNCC: 5 | RNVC: 2
50243000: RNCC: 5 | RNVC: 2

6 Jun 2001

5340-12-352-9894
Manual Control Handle

123529894
ET01042: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-351-3843
Runner

123513843
10063-311400: RNCC: 3 | RNVC: 2
10063-311400: RNCC: 5 | RNVC: 9

20 Jul 2000

5340-12-169-2022
Bridge Clamp

121692022
WW410106AR: RNCC: 3 | RNVC: 2
WW410106AR: RNCC: 5 | RNVC: 2
WW 410 106 AR: RNCC: 5 | RNVC: 2
WW410106AR: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-379-2625
Handle Grip

123792625
4058410: RNCC: 3 | RNVC: 2

8 Jul 2009

5340-12-316-8271
Door Button

123168271
2300279-9730.11: RNCC: 2 | RNVC: 2
2300279-9730.11: RNCC: 3 | RNVC: 2
2300279-9730.11: RNCC: 5 | RNVC: 9
9871631: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-367-2206
Permanent Magnet

123672206
3621059: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-369-8417
Manual Control Handle

123698417
134 3610: RNCC: 3 | RNVC: 2
7063103: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-12-366-0602
Cushioning Pad

123660602
CBD32572P01: RNCC: 3 | RNVC: 2

4 Mar 2005

5340-12-165-6831
Retaining Strap

121656831
2225018: RNCC: 3 | RNVC: 2
2225-01-8: RNCC: 5 | RNVC: 2

15 Jun 1976

5340-12-701-6043
Mounting Bracket

127016043
VG95211-ML-127016043: RNCC: 2 | RNVC: 2
5.12.6602.1040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3087
Mounting Bracket

127033087
VG95211-ML-127033087: RNCC: 2 | RNVC: 2
5.12.2210.1712.02: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-322-5563
Bow Handle

123225563
VG95149A100X18-M4-NRST-PASSIVIER: RNCC: 2 | RNVC: 2
VA10.100X28XM4.31.PASSIVIERT: RNCC: 3 | RNVC: 2
MEM3-1030P1: RNCC: 5 | RNVC: 2

31 Aug 1990

5340-12-391-3370
Access Cover

123913370
9999015-180540.005.0: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-382-6025
Elastic Strap

123826025
J KURZ-ZG2-1780: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-12-359-6796
Angle Bracket

123596796
2500261-182400.011.0: RNCC: 2 | RNVC: 2
2500261-182400.011.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-339-7097
Mending Plate

123397097
2500255-197100.001.0: RNCC: 2 | RNVC: 2
2500255-197100.001.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-324-0022
Nonmetallic Bumper

123240022
DIN95364-D100X45-M16X45-NR70ST: RNCC: 2 | RNVC: 2
2892487M91: RNCC: 5 | RNVC: 2
372 961 812: RNCC: 5 | RNVC: 2
551000-100X45-M16X45-NR70.ST: RNCC: 5 | RNVC: 2
614 221: RNCC: 5 | RNVC: 2
VG95364-D100X45-M16X45-NR70ST: RNCC: 5 | RNVC: 9

15 Jan 1991

5340-12-338-1316
Access Cover

123381316
160-75836-04: RNCC: 3 | RNVC: 2
15160-75836-04: RNCC: 5 | RNVC: 2
160-75836-04: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-376-1416
Mechanic Equipment Hardware Kit

123761416
0.0.388.08: RNCC: 3 | RNVC: 2

18 Aug 2008

5340-12-376-3228
Access Cover

123763228
BK208034-D: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-12-358-0307
Mounting Plate

123580307
EFP17662-1: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-12-387-1351
Webbing Strap

123871351
4100037-981149.001.0: RNCC: 2 | RNVC: 2
4100037-981149.001.0: RNCC: 3 | RNVC: 2

9 Nov 2011

5340-12-331-8409
Retaining Strap

123318409
R52185: RNCC: 3 | RNVC: 2
R 52185: RNCC: 5 | RNVC: 2
R52185: RNCC: 5 | RNVC: 9

25 Jun 1993

5340-12-194-2017
Angle Bracket

121942017
5800044-9122.02: RNCC: 2 | RNVC: 2
5800044-9122.02: RNCC: 3 | RNVC: 2
5800044-9122.02: RNCC: 5 | RNVC: 9

11 Oct 1982

5340-12-300-2811
Butt Hinge Leaf

123002811
3096880251: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-358-9598
Dust And Moisture Seal Protective Cap

123589598
6416950230: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-360-0021
Mounting Bracket

123600021
9414298340: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-348-9606
Double Angle Bracket

123489606
245/9713-01-15-00: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-12-182-0921
Retaining Strap

121820921
1000078-111100-06: RNCC: 2 | RNVC: 2
1000078-111100-06: RNCC: 5 | RNVC: 2
1000078-111100.06: RNCC: 5 | RNVC: 9
1000078-111100-06: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-310-2693
Nonmetallic Bumper

123102693
82200-FT469/81.010/212.NR63: RNCC: 3 | RNVC: 2
FT469/81.010/212-FLDN6390: RNCC: 3 | RNVC: 2
81.96020.0206: RNCC: 5 | RNVC: 2
81960200206: RNCC: 5 | RNVC: 2

30 Apr 1987

5340-12-167-1717
Dust And Moisture Seal Protective Cap

121671717
M8NR.608/13GRAU: RNCC: 3 | RNVC: 2
1000/893 GRAU: RNCC: 3 | RNVC: 2
SKS08: RNCC: 3 | RNVC: 2
5800583-094500-103: RNCC: 5 | RNVC: 2
5800583-094500.103: RNCC: 5 | RNVC: 2
608-13GRAU: RNCC: 5 | RNVC: 2
101089350: RNCC: 5 | RNVC: 2
GPN1000/893GRAU: RNCC: 5 | RNVC: 2

25 Nov 1976

5340-12-339-6481
Mounting Bracket

123396481
81432455015: RNCC: 3 | RNVC: 2
81.43245.5015: RNCC: 5 | RNVC: 2

18 Dec 1995

5340-12-307-7023
Mending Plate

123077023
RP981744: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-305-7620
Nonmetallic Bumper

123057620
106050: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-042-0661

5340-12-361-7846
Pawl Fastener

123617846
17290: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-376-1209
Rigid Caster

123761209
3201.14.0175: RNCC: 3 | RNVC: 2

14 Aug 2008

5340-12-133-4047

5340-12-198-1005
Nonmetallic Bumper

121981005
3092410313: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-12-010-8487

5340-12-305-6099
Mending Plate

123056099
716303: RNCC: 3 | RNVC: 2
501352: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-12-376-1286
Mounting Bracket

123761286
L221M1017883: RNCC: 3 | RNVC: 2

14 Aug 2008

5340-12-132-2412

5340-12-011-5899

5340-12-375-5859
Mending Plate

123755859
1290102518: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-130-8314

5340-12-360-3769
Mechanical Stop

123603769
4139 306 668: RNCC: 3 | RNVC: 2
(241)A39630-124719: RNCC: 5 | RNVC: 2
1PA39630-124719: RNCC: 8 | RNVC: 2
0-124719: RNCC: 8 | RNVC: 2

15 May 2003

5340-12-309-5148
Double Angle Bracket

123095148
70.1200.213-00: RNCC: 3 | RNVC: 2

30 Jan 1987

5340-12-196-9528
Angle Bracket

121969528
A-295027-403: RNCC: 3 | RNVC: 2
A295027-403: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-304-5268
Nonmetallic Bumper

123045268
5801434-200000.02: RNCC: 2 | RNVC: 2
5801434-200000.02: RNCC: 3 | RNVC: 2
5801434-200000.02: RNCC: 5 | RNVC: 9

26 Jul 1985

5340-12-354-7688
Extension Drawer Slide

123547688
P-876180-001: RNCC: 3 | RNVC: 2
P876180-001: RNCC: 5 | RNVC: 2

23 Aug 2001

5340-12-355-5810
Multiple Angle Bracket

123555810
2125-131162.00C: RNCC: 2 | RNVC: 2
2125-131162.00C: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-390-4696
Helical Compression Spring Seat

123904696
F1.4553-30-01-20.00-06: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-374-4833
Support Hook

123744833
453 6124-001: RNCC: 3 | RNVC: 2
453 6124-001: RNCC: 5 | RNVC: 2

21 Feb 2008

5340-12-145-9641
Webbing Strap

121459641
5800268-123: RNCC: 2 | RNVC: 2
5800268-123: RNCC: 3 | RNVC: 2
5800268-123: RNCC: 5 | RNVC: 2
5800268-123: RNCC: 5 | RNVC: 9
5800268-123: RNCC: 5 | RNVC: 9
000-F3-25X2,5X1125-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-319-4153
Access Cover

123194153
C249-A11-B53: RNCC: 3 | RNVC: 2

29 Sep 1989

5340-12-127-4311
Clamping Catch

121274311
81658005001: RNCC: 3 | RNVC: 2
90.18351-6449: RNCC: 5 | RNVC: 2
90183516449: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-0859
Rod End Connector

123480859
105-072-332-13: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-12-341-2018
Access Cover

123412018
01.947.0: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-12-362-2778
Mounting Bracket

123622778
0318911660: RNCC: 3 | RNVC: 2
3KK892: RNCC: 5 | RNVC: 2
03.189.11.66.0: RNCC: 5 | RNVC: 2

2 Feb 2004

5340-12-090-4692

5340-12-315-2536
Mounting Bracket

123152536
3818100142: RNCC: 3 | RNVC: 2
381 810 01 42: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-349-7844
Mounting Bracket

123497844
0044-602000B46B: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-358-7400
Access Cover

123587400
6773560020: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-379-3857
Doorstop

123793857
517353: RNCC: 3 | RNVC: 2

17 Jul 2009

5340-12-326-8184
Double Angle Bracket

123268184
30-92101-5092: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-12-312-2795
Extension Drawer Slide

123122795
1840134: RNCC: 3 | RNVC: 2
75D5.030.001-01: RNCC: 5 | RNVC: 2

11 Dec 1987

5340-12-171-5808
Electrical-Mechanical Equipment Post

121715808
1392265-030111.011: RNCC: 3 | RNVC: 2
1392265-030111-011: RNCC: 5 | RNVC: 9
1392265-030111.011: RNCC: 5 | RNVC: 9
1392265-030111-011: RNCC: 5 | RNVC: 9

26 Oct 1977

5340-12-394-0325
Angle Bracket

123940325
L313M2856101: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-044-4436

5340-12-359-4449
Mounting Bracket

123594449
3640760035: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-345-8774
Retaining Strap

123458774
6.232.0.977.006.4: RNCC: 3 | RNVC: 9
1216 2561: RNCC: 5 | RNVC: 2

11 May 1998

5340-12-352-5684
Runner

123525684
1.110.659.0: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-386-6043
Mechanical Stop

123866043
2500262-323010.000.0: RNCC: 2 | RNVC: 2
2500262-323010.000.0: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-351-3235
Mounting Bracket

123513235
2500113-5500: RNCC: 2 | RNVC: 2
2500113-5500: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-351-5101
Multiple Angle Bracket

123515101
4617902114: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-374-7446
Mounting Plate

123747446
999899-120000.004.0: RNCC: 3 | RNVC: 2

13 Mar 2008

5340-12-392-6805
Mechanic Equipment Hardware Kit

123926805
Y2300306-189899.000.0: RNCC: 2 | RNVC: 2
Y2300306-189899.000.0: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-12-196-9463
Angle Bracket

121969463
4900059-121249.002.0: RNCC: 3 | RNVC: 2
4900059-121249-002-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-145-1358
Spring Tension Clip

121451358
169571901: RNCC: 3 | RNVC: 2
7101-11-18.10: RNCC: 5 | RNVC: 2
7101-11-18-10: RNCC: 5 | RNVC: 2
7101-11-18-10: RNCC: 5 | RNVC: 9
7101-11-18.10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-7871
Angle Bracket

123087871
KM.S01-110800.000: RNCC: 3 | RNVC: 2
4900059-710228.000.0: RNCC: 5 | RNVC: 2

18 Nov 1986

5340-12-312-5899
Mending Plate

123125899
615.06-05-00-00-006: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-197-7699
Mending Plate

121977699
A-145401-052: RNCC: 3 | RNVC: 2
A145401-052: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-314-7439
Mending Plate

123147439
E-4782-01-98: RNCC: 3 | RNVC: 2
E4782-01-98: RNCC: 5 | RNVC: 2

5 Aug 1988

5340-12-365-5850
Double Angle Bracket

123655850
J28730021-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-340-7922
Resilient Mount

123407922
4900371-603000.02: RNCC: 2 | RNVC: 2
DIN95363-A30X20-M8X14M8X20NR55ST: RNCC: 2 | RNVC: 2
4900371-603000.02: RNCC: 5 | RNVC: 2
500031-M8X14-M8X20.NR55.ST: RNCC: 5 | RNVC: 2
4900371-603000.02: RNCC: 5 | RNVC: 2
VG95363-A30X20-M8X14-M8X20NR55ST: RNCC: 5 | RNVC: 9

13 Jun 1996

5340-12-192-2687
Pad Eye

121922687
65.7091.105.11-A001: RNCC: 3 | RNVC: 2
65-7091-105-11A001: RNCC: 5 | RNVC: 2
65.7091.105.11: RNCC: 5 | RNVC: 2
207801: RNCC: 5 | RNVC: 2

7 Apr 1982

5340-12-325-7610
Dust And Moisture Seal Protective Cap

123257610
1000/2424: RNCC: 3 | RNVC: 2
GPN1000/2424: RNCC: 5 | RNVC: 2

5 Jul 1991

5340-12-180-8845
Angle Bracket

121808845
2500035-124000-00: RNCC: 2 | RNVC: 2
2500035-124000-00: RNCC: 5 | RNVC: 2
2500035-124000.00: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-198-0963
Angle Bracket

121980963
1200096-111320015: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-392-6003
Dust And Moisture Seal Protective Cap

123926003
6000062-391214.000.0: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-148-3011
Loop Clamp

121483011
R20-MESSING: RNCC: 3 | RNVC: 2
H3220-D4X6-MS: RNCC: 3 | RNVC: 2
0117 7780: RNCC: 5 | RNVC: 2
H3220-A4X6-MS: RNCC: 5 | RNVC: 2
H3220-D4X6-MS: RNCC: 5 | RNVC: 2
WN8510-4X35-MS: RNCC: 5 | RNVC: 2
4X35WN8510MS: RNCC: 5 | RNVC: 9
WN8510-4X35-MS: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-1222
Mounting Bracket

123561222
2339-170000A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-388-6396
Catch Strike

123886396
122W185150.001.0: RNCC: 2 | RNVC: 2
122W185150.001.0: RNCC: 3 | RNVC: 2
122W185150.001.0: RNCC: 5 | RNVC: 9

5 Apr 2012

5340-12-384-6640
Lock Key Set

123846640
I002725: RNCC: 3 | RNVC: 2
4052063027254: RNCC: 5 | RNVC: 2

17 Mar 2011

5340-12-332-0099
Butt Hinge

123320099
919800: RNCC: 3 | RNVC: 2
4000.300.009: RNCC: 5 | RNVC: 2
NL 4000.300.009: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-12-377-3646
Mounting Bracket

123773646
98409727: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-361-4345
Loop Clamp

123614345
1504297: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-317-4815
Rod End Clevis

123174815
1741113B1401: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-12-194-3708
Plug Button

121943708
271821890: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-12-307-8168
Lock-Release Lever

123078168
RP988607: RNCC: 3 | RNVC: 2

29 Jul 1986

5340-12-374-2987
Mounting Plate

123742987
5324793: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-179-5142
Electrical-Mechanical Equipment Post

121795142
CF414299: RNCC: 3 | RNVC: 2
CF 414 299: RNCC: 5 | RNVC: 2
CF414299: RNCC: 5 | RNVC: 2
CF 414 299: RNCC: 5 | RNVC: 2
CF414299: RNCC: 5 | RNVC: 2
CF 414 299: RNCC: 5 | RNVC: 2

4 Jul 1979

5340-12-169-2026
Dust And Moisture Seal Protective Plug

121692026
WW410571: RNCC: 3 | RNVC: 2
WW410571: RNCC: 5 | RNVC: 2
WW 410 571: RNCC: 5 | RNVC: 2
WW410571: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-340-2291
Protection Bellows

123402291
362729: RNCC: 3 | RNVC: 2
362729: RNCC: 5 | RNVC: 2

15 Mar 1996

5340-12-044-1349

5340-12-070-2065

5340-12-308-6833
Angle Bracket

123086833
152-45544: RNCC: 3 | RNVC: 2

7 Nov 1986

5340-12-317-1800
Nonmetallic Bumper

123171800
4603170026: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-376-8105
Nut And Bolt Locking Plate

123768105
5369940025: RNCC: 3 | RNVC: 2

10 Nov 2008

5340-12-306-0123
Angle Bracket

123060123
2475301: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-341-2010
Nonmetallic Bumper

123412010
251371150603: RNCC: 3 | RNVC: 2
251371150603: RNCC: 5 | RNVC: 2
25 1371 15 06 03: RNCC: 5 | RNVC: 9

8 Aug 1996

Load More Results