What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 66 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 66 of 178

5340-12-315-4141
Nonmetallic Bumper

123154141
15368501: RNCC: 3 | RNVC: 2
320414: RNCC: 5 | RNVC: 2

20 Oct 1988

5340-12-331-5230
Mounting Plate

123315230
2992948: RNCC: 3 | RNVC: 2
299.2948.00: RNCC: 5 | RNVC: 2

17 May 1993

5340-12-302-2041
Dust And Moisture Seal Protective Cap

123022041
032025609: RNCC: 3 | RNVC: 2

8 Dec 1984

5340-12-150-2411
Buegel- Griff

5340-12-150-7226
Spannschlosz

5340-12-010-8476

5340-12-010-8611

5340-12-353-1905
Bow Handle

123531905
AFG0702165: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-12-179-5092
Dust And Moisture Seal Protective Cap

121795092
F0748: RNCC: 3 | RNVC: 2
3520180206: RNCC: 5 | RNVC: 2

4 Jul 1979

5340-12-149-5208
Gurtgewebe- Riemen

5340-12-150-7253
Spannschlosz

5340-12-356-9293
Befestigung Halter

5340-12-318-6001
Mounting Bracket

123186001
88066134004: RNCC: 3 | RNVC: 2
88.06613.4004: RNCC: 5 | RNVC: 2
88066134004: RNCC: 5 | RNVC: 9

31 Jul 1989

5340-12-333-3669
Retaining Strap

123333669
13668: RNCC: 3 | RNVC: 2

7 Dec 1993

5340-12-346-7675
Loop Clamp

123467675
5097595/4: RNCC: 3 | RNVC: 2

8 Sep 1998

5340-12-367-1138
Access Hole Frame

123671138
8.B.1.0.0.00001: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-12-325-5083
Bow Handle

123255083
3523000: RNCC: 3 | RNVC: 2
106 014: RNCC: 5 | RNVC: 2
3559: RNCC: 5 | RNVC: 2
3523000: RNCC: 5 | RNVC: 9
3559: RNCC: 5 | RNVC: 9

12 Jun 1991

5340-12-333-8000
Access Cover

123338000
53.1622.018.00: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-12-386-1885
Mounting Bracket

123861885
0053 316 062: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-194-7326
Pad Eye

121947326
148705: RNCC: 3 | RNVC: 2

1 Dec 1982

5340-12-386-1181
Access Cover

123861181
4138301033: RNCC: 3 | RNVC: 2
(241)A42494138301033: RNCC: 5 | RNVC: 2
4138 301 033: RNCC: 5 | RNVC: 2

9 Aug 2011

5340-12-385-0308
Mounting Plate

123850308
S010003: RNCC: 3 | RNVC: 2
04052063170813: RNCC: 5 | RNVC: 2

20 Apr 2011

5340-12-310-6230
Cane Bolt

123106230
52.0260.010.01: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-349-1737
Snap Hook

123491737
2500271-60210.02: RNCC: 2 | RNVC: 2
7103178: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-359-9435
Angle Bracket

123599435
03960500: RNCC: 3 | RNVC: 2
05722536: RNCC: 5 | RNVC: 2

21 Mar 2003

5340-12-347-8836
Access Cover

123478836
5582040203: RNCC: 3 | RNVC: 2
558 204 02 03: RNCC: 5 | RNVC: 9

3 Mar 1999

5340-12-342-8143
Flush Lock

123428143
721843654C: RNCC: 3 | RNVC: 9

7 Apr 1997

5340-12-180-7413
Retaining Strap

121807413
1269 307 032: RNCC: 3 | RNVC: 2
2968885EY5032-53: RNCC: 5 | RNVC: 2
02968885: RNCC: 5 | RNVC: 2
1269307032: RNCC: 5 | RNVC: 9

1 Oct 1979

5340-12-379-4520
Access Cover

123794520
4234 301 001: RNCC: 3 | RNVC: 2

24 Jul 2009

5340-12-357-8153
Mending Plate

123578153
2300042-255512.002: RNCC: 2 | RNVC: 2
9940415: RNCC: 3 | RNVC: 2
2300042-255512.002: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-355-9362
Nonmetallic Bumper

123559362
601 262: RNCC: 3 | RNVC: 2
601262: RNCC: 5 | RNVC: 2

8 Jan 2002

5340-12-180-3123
Bow Handle

121803123
581K0184: RNCC: 3 | RNVC: 2
02612597: RNCC: 5 | RNVC: 2
2612597EZ5508-34: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-378-0207
Loop Clamp

123780207
17316892: RNCC: 3 | RNVC: 2
18-M8-17316892EY11-0760: RNCC: 5 | RNVC: 2

5 Mar 2009

5340-12-351-4609
Mending Plate

123514609
160-88343-03: RNCC: 3 | RNVC: 2

29 Jul 2000

5340-12-145-2852
Nonmetallic Bumper

121452852
4700055: RNCC: 3 | RNVC: 2
39016: RNCC: 5 | RNVC: 2
201001022: RNCC: 5 | RNVC: 2
0029870340: RNCC: 5 | RNVC: 2
2345-27200-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-382-8732
Access Cover

123828732
21-000-02-0105621: RNCC: 3 | RNVC: 2

18 Aug 2010

5340-12-359-6546
Angle Bracket

123596546
2277-100000C03B: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-12-182-3979
Loop Clamp

121823979
1200037-1-036: RNCC: 3 | RNVC: 2
1200037-1.036: RNCC: 5 | RNVC: 2
1200037-1-036: RNCC: 5 | RNVC: 9

30 Jan 1980

5340-12-702-5274
Mounting Bracket

127025274
VG95211-ML-127025274: RNCC: 2 | RNVC: 2
5.51.7010.0651.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-181-4239
Mending Plate

121814239
81251400064: RNCC: 3 | RNVC: 2
23246-063000-001-0: RNCC: 5 | RNVC: 9
23246-063000.001.0: RNCC: 5 | RNVC: 9

22 Nov 1979

5340-12-324-8135
Double Angle Bracket

123248135
702-444910-000-0: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-313-0182
Angle Bracket

123130182
P-086148-407: RNCC: 3 | RNVC: 2
P086148-407: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-306-0721
Mending Plate

123060721
5801984-200211.004.0: RNCC: 2 | RNVC: 2
5801984-200211.004.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-313-0187
Double Angle Bracket

123130187
P-086148-010: RNCC: 3 | RNVC: 2
P086148-010: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-389-3736
Bow Handle

123893736
S533M9030111: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-12-302-4672
Mending Plate

123024672
43712549-601: RNCC: 2 | RNVC: 2
43712549-601: RNCC: 3 | RNVC: 2

3 Jan 1985

5340-12-198-8074
Mending Plate

121988074
3522900031: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-042-1620

5340-12-316-2233
Pipe Bracket

123162233
1616466089-W5: RNCC: 3 | RNVC: 2
67210710: RNCC: 5 | RNVC: 2
1616466089W5: RNCC: 5 | RNVC: 2

2 Jan 1989

5340-12-702-5356
Mounting Bracket

127025356
VG95211-ML-127025356: RNCC: 2 | RNVC: 2
5.51.7204.0520.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-386-4096
Mounting Plate

123864096
2500262-190541.000.0: RNCC: 2 | RNVC: 2
2500262-190541.000.0: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-304-0661
Mending Plate

123040661
B-02-005-03-000: RNCC: 3 | RNVC: 2
7-698-0228: RNCC: 5 | RNVC: 2

7 Jun 1985

5340-12-303-5896
Mending Plate

123035896
704-121400-905-0: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-328-7216
Lock-Release Lever

123287216
2350-012300.002.0: RNCC: 2 | RNVC: 2
2350-012300.002.0: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-12-368-4758
Mounting Plate

123684758
2300519-184000.001.0: RNCC: 2 | RNVC: 2
2300519-184000.001.0: RNCC: 3 | RNVC: 2
1722276: RNCC: 5 | RNVC: 2

15 Mar 2006

5340-12-701-6106
Mounting Bracket

127016106
VG95211-ML-127016106: RNCC: 2 | RNVC: 2
5.12.7010.1400.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6097
Mounting Bracket

127016097
VG95211-ML-127016097: RNCC: 2 | RNVC: 2
5.12.7003.1400.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-6129
Flush Lock

127006129
VG95211-ML-127006129: RNCC: 2 | RNVC: 2
5.12.4805.0410.91: RNCC: 3 | RNVC: 2
0501400526449: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-12-386-5656
Access Cover

123865656
4000A-310626.001.0: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-327-0608
Mending Plate

123270608
702-235100-903-0: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-12-701-1402
Angle Bracket

127011402
VG95211-ML-127011402: RNCC: 2 | RNVC: 2
5.12.0100.6900.12: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-043-5937

5340-12-364-4820
Manual Control Handle

123644820
54.1105.250.02: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-091-0617

5340-12-372-1483
Mounting Bracket

123721483
S252M1040102: RNCC: 2 | RNVC: 2
S252M1040102: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-302-6928
Mending Plate

123026928
43712107-601: RNCC: 2 | RNVC: 2
43712107-601: RNCC: 3 | RNVC: 2
43712107-601: RNCC: 5 | RNVC: 2

23 Jan 1985

5340-12-041-9766

5340-12-316-4718
Mounting Bracket

123164718
54.0026.888.00: RNCC: 3 | RNVC: 2
54002688800: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-133-5694

5340-12-331-0295
Webbing Strap

123310295
52.3109.540.16: RNCC: 2 | RNVC: 2
52.3109.540.16: RNCC: 3 | RNVC: 2

15 Mar 1993

5340-12-364-3834
Webbing Strap

123643834
42.050.017: RNCC: 3 | RNVC: 9

17 Sep 2004

5340-12-371-2712
Nonmetallic Bumper

123712712
2738: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-183-3244
Access Cover

121833244
2452101: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-183-1187
Pipe Hanger Extension Bar

121831187
0287 9505: RNCC: 3 | RNVC: 2
2879505: RNCC: 5 | RNVC: 2
2879505EE0693-79: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-386-5793
Butt Hinge Leaf

123865793
T531M5500103: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-347-0230
Snap Hook

123470230
NB 6270: RNCC: 3 | RNVC: 9
70X7 NB 6270: RNCC: 5 | RNVC: 9

13 Oct 1998

5340-12-349-8485
Mounting Plate

123498485
A1Z10283929: RNCC: 2 | RNVC: 2
A1Z10283923: RNCC: 3 | RNVC: 2
20361700: RNCC: 5 | RNVC: 2

17 Jan 2000

5340-12-140-7923

5340-12-180-5288
Spring Tension Clip

121805288
3554683: RNCC: 3 | RNVC: 2

17 Sep 1979

5340-12-173-0383
Loop Clamp

121730383
DIN3016-1-D2-8-8X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-8-8X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X8/12: RNCC: 3 | RNVC: 2
4219212008: RNCC: 5 | RNVC: 2
RSGU1100.2X8/12: RNCC: 5 | RNVC: 2
RSGU1100-2X8-12: RNCC: 5 | RNVC: 2
DIN3016-D2-8-8X12-W1-2: RNCC: 5 | RNVC: 9

15 Mar 1978

5340-12-390-2159
Loop Clamp

123902159
DIN3016-1-D1-69X25-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Oct 2012

5340-12-340-8816
Support Hook

123408816
23182-7016-D: RNCC: 3 | RNVC: 2
23182-7016: RNCC: 5 | RNVC: 2

27 Jun 1996

5340-12-301-3818
Butt Hinge

123013818
P-855244-403: RNCC: 3 | RNVC: 2
P855244-403: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-382-8335
Spring Loaded Cylinder Fastener

123828335
10113-012160.000.0: RNCC: 2 | RNVC: 2
10113-012160.000.0: RNCC: 3 | RNVC: 2

13 Aug 2010

5340-12-339-7410
Seal Retaining Plate

123397410
2500255-000000.009.0: RNCC: 2 | RNVC: 2
2500255-000000.009.0: RNCC: 3 | RNVC: 2

9 Jan 1996

5340-12-374-1757
Loop Clamp

123741757
DIN3016-1-D1-40X20-W5: RNCC: 2 | RNVC: 2
RSGU1.40/20-W5: RNCC: 3 | RNVC: 2
DKAI036: RNCC: 5 | RNVC: 2
VG95931-D40X20-W5: RNCC: 5 | RNVC: 9

25 Jan 2008

5340-12-188-9278
Butt Hinge Leaf

121889278
2500075-320750.01.0: RNCC: 2 | RNVC: 2
2500075-320750.01.0: RNCC: 3 | RNVC: 2
2500075-320750-01-0: RNCC: 5 | RNVC: 2
2500075-320750-01-0: RNCC: 5 | RNVC: 9
2500075-320750.01.0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-361-0374
Angle Bracket

123610374
J92227019-003: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-336-6469
Loop Clamp

123366469
DIN3015-S-KP-4-R-42-PP: RNCC: 2 | RNVC: 2
6042PP: RNCC: 3 | RNVC: 2
RCPR-442: RNCC: 3 | RNVC: 2
RCPR-442: RNCC: 5 | RNVC: 2
6042PP: RNCC: 5 | RNVC: 2
RCP-442: RNCC: 5 | RNVC: 2

5 Dec 1994

5340-12-314-1023
Retaining Strap

123141023
1000202-0-01: RNCC: 3 | RNVC: 2

7 Jun 1988

5340-12-326-7235
Lock-Release Lever

123267235
6600155-202100.00: RNCC: 2 | RNVC: 2
6600155-202100.00: RNCC: 3 | RNVC: 2

23 Oct 1991

5340-12-177-5159
Handle Grip

121775159
2300002-181011.000: RNCC: 2 | RNVC: 2
2300002-181011.000: RNCC: 3 | RNVC: 2
2300002-181011: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-332-9831
Dust And Moisture Seal Protective Cap

123329831
189.826: RNCC: 3 | RNVC: 2
81.96410-0525: RNCC: 5 | RNVC: 2

18 Oct 1993

5340-12-342-6179
Handle Grip

123426179
U100-3422-101: RNCC: 2 | RNVC: 2
U100-3422-101: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-361-3352
Mounting Plate

123613352
51974800422: RNCC: 3 | RNVC: 2
51.97480-0422: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-198-1435
Angle Bracket

121981435
5801999-251000.00: RNCC: 2 | RNVC: 2
5801999-251000.00: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-389-2541
Mounting Plate

123892541
81423900218: RNCC: 3 | RNVC: 2
81.42390-0218: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-12-167-0992
Loop Clamp

121670992
DIN3016-1-A1-10X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-10X12-W1-2: RNCC: 3 | RNVC: 2
RS1.10/12: RNCC: 3 | RNVC: 2
RS1100.10/12: RNCC: 5 | RNVC: 2
RS1100-10-12: RNCC: 5 | RNVC: 2
4110012010: RNCC: 5 | RNVC: 2
VG95931-A10X12-W1: RNCC: 5 | RNVC: 9
VG95931A10X12W1: RNCC: 5 | RNVC: 9
DIN3016-A1-10X12-W1-2: RNCC: 5 | RNVC: 9

23 Nov 1976

5340-12-177-5165
Pad Eye

121775165
2300002-181040.005: RNCC: 2 | RNVC: 2
2300002-181040.005: RNCC: 3 | RNVC: 2
2300002-181040-005: RNCC: 5 | RNVC: 9
2300002-181040.005: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-177-2356
Double Angle Bracket

121772356
2300002-224500.019: RNCC: 2 | RNVC: 2
2300002-224500.019: RNCC: 3 | RNVC: 2
2300002-224500.019: RNCC: 5 | RNVC: 9
2300002-224500-019: RNCC: 5 | RNVC: 9

22 Jan 1979

5340-12-344-8929
Nonmetallic Bumper

123448929
U15.151000.05-00: RNCC: 3 | RNVC: 2

8 Jan 1998

5340-12-380-5166
Locking Shackle

123805166
433-920-0025: RNCC: 3 | RNVC: 2
0008370336: RNCC: 5 | RNVC: 2

4 Nov 2009

5340-12-349-7654
Nonmetallic Bumper

123497654
U60.232000.06-00: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-320-6058
Nonmetallic Bumper

123206058
42088284: RNCC: 3 | RNVC: 2
42088284ED50-0446: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-12-701-2662
Angle Bracket

127012662
VG95211-ML-127012662: RNCC: 2 | RNVC: 2
5.12.4805.0004.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-8373
Webbing Strap

121828373
TK5340-065: RNCC: 2 | RNVC: 2
4200053-11: RNCC: 5 | RNVC: 2
4200053-11: RNCC: 5 | RNVC: 9

27 Feb 1980

5340-12-309-2214
Nonmetallic Bumper

123092214
82300-2200360.NR45.ST: RNCC: 3 | RNVC: 2
2200360: RNCC: 3 | RNVC: 2
2200360.NR45.ST: RNCC: 5 | RNVC: 2

23 Dec 1986

5340-12-320-8118
Dust And Moisture Seal Protective Cap

123208118
800/9/16"-18UNF: RNCC: 3 | RNVC: 2
GPN800/9/16JN-18UNF: RNCC: 5 | RNVC: 2
GPN800-A9/16-18UNF: RNCC: 5 | RNVC: 2
800/9/16JN-18UNF: RNCC: 5 | RNVC: 2

19 Feb 1990

5340-12-369-5517
Double Angle Bracket

123695517
5.048-300.0: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-12-388-2967
Block Clamp

123882967
11.43386-0309: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-12-382-6253
Nut And Bolt Head Protective Cap

123826253
059006: RNCC: 3 | RNVC: 2

19 Jul 2010

5340-12-316-1548
Double Angle Bracket

123161548
3954920941: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-354-1558
Snap-In Threaded Standoff

123541558
506 072 04 89: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-349-8150
Dust And Moisture Seal Protective Plug

123498150
81960020312: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-381-9091
Mechanical Stop

123819091
000605-204000.01: RNCC: 2 | RNVC: 2
39134: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-12-386-7486
Mounting Bracket

123867486
T251M4963101: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-353-2157
Bow Handle

123532157
16001475: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-326-6144
Dust And Moisture Seal Protective Plug

123266144
6019970335: RNCC: 3 | RNVC: 2

15 Oct 1991

5340-12-193-4457
Sealing Plug Assembly

121934457
4069970035: RNCC: 3 | RNVC: 2

21 Jul 1982

5340-12-143-7462

5340-12-357-7629
Webbing Strap

123577629
909143803: RNCC: 2 | RNVC: 2
909143803: RNCC: 3 | RNVC: 2

19 Jul 2002

5340-12-346-8367
Double Angle Bracket

123468367
8680.1016: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-12-357-1737
Mechanical Stop

123571737
8800180292: RNCC: 2 | RNVC: 2
8800180292: RNCC: 3 | RNVC: 2

15 May 2002

5340-12-356-0920
Strap Hinge

123560920
4609100252: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-335-6745
Mounting Plate

123356745
7801035061: RNCC: 3 | RNVC: 2
78010 35061: RNCC: 5 | RNVC: 9

12 Sep 1994

5340-12-343-4336
Mounting Bracket

123434336
028199351: RNCC: 3 | RNVC: 2
F300 0T 023 1265: RNCC: 6 | RNVC: 9

19 Jun 1997

5340-12-195-0214
Wood Runner

121950214
3825022004: RNCC: 3 | RNVC: 2
38250 22004: RNCC: 5 | RNVC: 9

3 Jan 1983

5340-12-359-8464
Mounting Plate

123598464
1421901177: RNCC: 3 | RNVC: 2
0132 1214: RNCC: 3 | RNVC: 2
0131 0181: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-322-3583
Butt Hinge

123223583
100013861: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-360-2951
Eye Hook

123602951
000611-266000.00: RNCC: 3 | RNVC: 2

6 May 2003

5340-12-090-6954

5340-12-360-0908
Angle Bracket

123600908
2500262-830000.014.0: RNCC: 2 | RNVC: 2
2500262-830000.014.0: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-026-9925

5340-12-311-0195
Plain Solid Disk

123110195
046.870.3: RNCC: 3 | RNVC: 2
46870.3: RNCC: 5 | RNVC: 2

17 Jul 1987

5340-12-320-8779
Dust And Moisture Seal Protective Cap Set

123208779
890124: RNCC: 3 | RNVC: 2

1 Mar 1990

5340-12-136-4335

5340-12-092-0930

5340-12-316-2993
Rod End Clevis

123162993
5186597: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-319-4989
Nonmetallic Bumper

123194989
VG95092B12X5NR60: RNCC: 2 | RNVC: 2
VG95092B12X5NR60: RNCC: 3 | RNVC: 2

6 Oct 1989

5340-12-367-9666
Nonmetallic Bumper

123679666
5592370112: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-360-1431
Mounting Plate

123601431
3032235: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-311-4467
Dust And Moisture Seal Protective Cap

123114467
0019881435: RNCC: 2 | RNVC: 2
0019881435: RNCC: 3 | RNVC: 2
001 988 1435: RNCC: 5 | RNVC: 2
VK50X10.46.20: RNCC: 5 | RNVC: 2
VK 50X10X46.20: RNCC: 5 | RNVC: 2

3 Sep 1987

5340-12-360-6268
Mounting Plate

123606268
3539028228: RNCC: 3 | RNVC: 2

18 Jun 2003

5340-12-348-5906
Eye Hook

123485906
837 642 44: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-12-338-9963
Metallic Solid Wheel

123389963
2327-801.108: RNCC: 2 | RNVC: 2
2327-801.108: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-12-094-5448

5340-12-186-3149
Dust And Moisture Seal Protective Cap

121863149
130999: RNCC: 3 | RNVC: 2
130 999: RNCC: 5 | RNVC: 2
2163760: RNCC: 5 | RNVC: 2
41823099: RNCC: 5 | RNVC: 2
41823099EE8728-70: RNCC: 5 | RNVC: 2
908097214: RNCC: 5 | RNVC: 2
41823099: RNCC: 5 | RNVC: 9
41823099EE8728-70: RNCC: 5 | RNVC: 9

13 Dec 1980

5340-12-380-4390
Buckle

123804390
P20545NM: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-12-196-6769
Expansion Plug

121966769
3269970520: RNCC: 3 | RNVC: 2

1 Aug 1983

5340-12-301-6067
Double Angle Bracket

123016067
2300107-320100.08: RNCC: 2 | RNVC: 2
2300107-320100.08: RNCC: 3 | RNVC: 2
2300107-320100.08: RNCC: 5 | RNVC: 9
2300107-320100.08: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-387-4844
Mounting Bracket

123874844
6625206544: RNCC: 3 | RNVC: 2

28 Dec 2011

5340-12-323-5909
Loop Clamp

123235909
188F: RNCC: 3 | RNVC: 2
ZET188F: RNCC: 5 | RNVC: 2

10 Dec 1990

5340-12-324-1354
Webbing Strap

123241354
400132404: RNCC: 3 | RNVC: 2

23 Jan 1991

5340-12-355-3458
Mechanical Stop

123553458
1465132655: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-360-6675
Angle Bracket

123606675
0009317093: RNCC: 3 | RNVC: 2
0009317093: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-375-9779
Loop Clamp

123759779
63539A: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-12-382-2529
Mounting Bracket

123822529
S433M1139103: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-351-3593
Loop Clamp

123513593
0009951407: RNCC: 3 | RNVC: 2
R277: RNCC: 5 | RNVC: 2
0009951407: RNCC: 5 | RNVC: 2

18 Jul 2000

5340-12-145-6664

5340-12-388-0265
Angle Bracket

123880265
5841871340: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-318-5727
Access Cover

123185727
4493401: RNCC: 3 | RNVC: 2

28 Jul 1989

5340-12-347-8811
Hand Crank

123478811
2995.09.31: RNCC: 2 | RNVC: 2
2995.09.31: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-134-1619

5340-12-183-1591
Angle Bracket

121831591
213G20T42: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-175-0997
Butt Hinge Leaf

121750997
4257230041: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-163-3196
Expansion Plug

121633196
3469970020: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-341-0449
Double Angle Bracket

123410449
B0554804: RNCC: 3 | RNVC: 2

20 Jul 1996

5340-12-349-1333
Handrail Bracket

123491333
606A572: RNCC: 3 | RNVC: 2
909617703: RNCC: 5 | RNVC: 2

29 Sep 1999

5340-12-358-7933
Mounting Plate

123587933
2500271-71100.01: RNCC: 2 | RNVC: 2
185024: RNCC: 3 | RNVC: 2
2500271-71100.01: RNCC: 5 | RNVC: 9

14 Nov 2002

5340-12-358-9463
Mounting Bracket

123589463
81061405006: RNCC: 3 | RNVC: 2
81.06140.5006: RNCC: 5 | RNVC: 2

2 Dec 2002

5340-12-319-5346
Electrical-Mechanical Equipment Post

123195346
52.9352.103.18: RNCC: 3 | RNVC: 2
52.9352.103.18: RNCC: 5 | RNVC: 9

10 Oct 1989

5340-12-123-6971
Utility Resilient Mount

121236971
115P24707: RNCC: 3 | RNVC: 2
511550714: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-6928
Retaining Strap

121876928
37 073-001: RNCC: 3 | RNVC: 2
37073-001: RNCC: 5 | RNVC: 2

29 Apr 1981

5340-12-365-7374
Bow Handle

123657374
GN424-10-192: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-12-316-1192
Mending Plate

123161192
P-M41913-008: RNCC: 3 | RNVC: 2
PM-41913-008: RNCC: 5 | RNVC: 2
PM41913-008: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-365-5838
Angle Bracket

123655838
J28230122-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-700-9130
Angle Bracket

127009130
VG95211-ML-127009130: RNCC: 2 | RNVC: 2
2.20.6409.0001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-7079
Mounting Plate

123197079
1229-210.33: RNCC: 2 | RNVC: 2
533221-0273.000: RNCC: 3 | RNVC: 2
533221-0273.000: RNCC: 5 | RNVC: 9

27 Oct 1989

5340-12-197-7922
Angle Bracket

121977922
A-145203-093: RNCC: 3 | RNVC: 2
A145203-093: RNCC: 5 | RNVC: 2

23 Nov 1983

5340-12-135-6696
Butt Hinge

121356696
DIN7956-20X0,7-30-MS-ST-BK: RNCC: 2 | RNVC: 2
A20DIN7956MS: RNCC: 5 | RNVC: 2
DIN7956-20X0,7-30-MS-BK: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-5860
Angle Bracket

123655860
J29120116-402: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-356-3260
Manual Control Lever

123563260
2125-121000A05B: RNCC: 2 | RNVC: 2
2125-121000A05B: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-313-5696
Mounting Bracket

123135696
6100108-1720.00: RNCC: 2 | RNVC: 2
6100108-1720.00: RNCC: 3 | RNVC: 2

16 Apr 1988

5340-12-362-9361
Lock-Release Lever

123629361
215374: RNCC: 3 | RNVC: 2
93112-322: RNCC: 5 | RNVC: 9

17 Apr 2004

5340-12-382-3681
Spring Tension Clip

123823681
DIN471-M15X1-A2D: RNCC: 2 | RNVC: 2

11 Jun 2010

5340-12-338-3037
Blank Panel

123383037
6600084-110400.18: RNCC: 3 | RNVC: 2
6600084-110400.18: RNCC: 5 | RNVC: 9

20 Jun 1995

5340-12-301-4323
Angle Bracket

123014323
P-855206-003: RNCC: 3 | RNVC: 2
P855206-003: RNCC: 5 | RNVC: 2

13 Oct 1984

5340-12-164-5737
Catch Strike

121645737
730024-20.4: RNCC: 2 | RNVC: 2
730024-20-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5280
Mounting Plate

127025280
VG95211-ML-127025280: RNCC: 2 | RNVC: 2
5.51.7010.0710.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-165-7874
Dust And Moisture Seal Protective Cap

121657874
25704-191360.05.0: RNCC: 2 | RNVC: 2
4515240159: RNCC: 3 | RNVC: 2
25704-191360.05.0: RNCC: 3 | RNVC: 2
25704-191360-05-0: RNCC: 5 | RNVC: 2
25704-191360.05.0: RNCC: 5 | RNVC: 9
25704-191350-06-0: RNCC: 5 | RNVC: 9
25704-191350.06.0: RNCC: 5 | RNVC: 9
25704-191350-06-0: RNCC: 5 | RNVC: 9
25704-191350.06.0: RNCC: 5 | RNVC: 9
25704-191360-05-0: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-384-5259
Vehicle B Carriage

123845259
F1.1189-30-10-10.00-57: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-12-196-9861
Angle Bracket

121969861
A-230129-201: RNCC: 3 | RNVC: 2
A230129-201: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-346-4853
Mechanical Stop

123464853
2300348-186210.006.0: RNCC: 2 | RNVC: 2
1807298: RNCC: 3 | RNVC: 2
2300348-186210.006.0: RNCC: 5 | RNVC: 2

30 Jul 1998

5340-12-187-9066
Access Cover

121879066
2300109-182008.000.0: RNCC: 2 | RNVC: 2
2300109-182008.000.0: RNCC: 3 | RNVC: 2
2300109-182008.000.0: RNCC: 5 | RNVC: 2
2300109-182017.000.0: RNCC: 5 | RNVC: 2
2300109-182017-000-0: RNCC: 5 | RNVC: 2
2300109-182017.000.0: RNCC: 5 | RNVC: 2
2300109-182017-000-0: RNCC: 5 | RNVC: 2
2300109-182017.000.0: RNCC: 5 | RNVC: 9
2300109-182017-000-0: RNCC: 5 | RNVC: 9
2300109-182017.000.0: RNCC: 5 | RNVC: 9

19 May 1981

5340-12-190-2785
Loop Clamp

121902785
VG95211-ML-121902785: RNCC: 2 | RNVC: 2
231 8036 106: RNCC: 3 | RNVC: 2
BRSP106/30SKZ-W4/W5: RNCC: 3 | RNVC: 2
2310700106: RNCC: 5 | RNVC: 2
BRSP106-30SKZ1-4571: RNCC: 5 | RNVC: 2
BRSP106/30SKZ-1.4571: RNCC: 5 | RNVC: 2
BRSP106/30SKZ-W5: RNCC: 5 | RNVC: 2

17 Nov 1981

5340-12-311-2626
Turnbuckle

123112626
2300223-180008.00.0: RNCC: 2 | RNVC: 2
2300223-180008.00.0: RNCC: 3 | RNVC: 2

11 Aug 1987

5340-12-313-8453
Nonmetallic Bumper

123138453
DIN95364-A50X25-NR60ST-M10X25: RNCC: 2 | RNVC: 2
91622226: RNCC: 5 | RNVC: 2
811.030.050.025.10X25.NR60.ST: RNCC: 5 | RNVC: 2
91002-900123: RNCC: 5 | RNVC: 2
D5025: RNCC: 5 | RNVC: 2
VG95364-A50X25-NR60ST-M10X25: RNCC: 5 | RNVC: 9

11 May 1988

5340-12-334-4320
T Bracket

123344320
6700018-201220.03: RNCC: 2 | RNVC: 2
6700018-201220.03: RNCC: 3 | RNVC: 2

6 May 1994

5340-12-326-5090
Mounting Bracket

123265090
704-122820-000-0: RNCC: 3 | RNVC: 2

26 Sep 1991

5340-12-371-8776
Angle Bracket

123718776
1506134: RNCC: 3 | RNVC: 2
15004270: RNCC: 5 | RNVC: 2
548-060006.00.0: RNCC: 5 | RNVC: 2

24 May 2007

5340-12-162-4741
Electrical-Mechanical Equipment Post

121624741
VG95148C7XM4X32-ST-B3C: RNCC: 2 | RNVC: 2
5800359-020171-06: RNCC: 3 | RNVC: 2
VG95148C7XM4X32-ST-B3C: RNCC: 3 | RNVC: 2
5800359-020171-06: RNCC: 5 | RNVC: 9
5800359-020171.06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-6702
Electrical-Mechanical Equipment Post

123146702
512214-2511.000: RNCC: 3 | RNVC: 2
512214-2511: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-168-1212
Loop Clamp

121681212
4H050-3803: RNCC: 3 | RNVC: 2

18 Feb 1977

5340-12-321-7052
Metal Runner

123217052
702-143400-901-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-329-5380
Mending Plate

123295380
2500229-197600.000.0: RNCC: 2 | RNVC: 2
2500229-197600.000.0: RNCC: 3 | RNVC: 2

28 Aug 1992

5340-12-370-3322
Angle Bracket

123703322
1216 3319: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-12-164-8130
Butt Hinge

121648130
160-73417: RNCC: 3 | RNVC: 2
160-73417: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-8573
Spring Tension Clip

121878573
251380010004: RNCC: 3 | RNVC: 2
251380010004: RNCC: 5 | RNVC: 2
0008352634: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-373-9141
Angle Bracket

123739141
1461332441: RNCC: 3 | RNVC: 2
722110: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-12-382-6029
Nut And Bolt Head Protective Cap

123826029
0590012: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-12-373-6368
Spacing Threaded Standoff

123736368
8809972616: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-382-6950
Retaining Strap

123826950
806280613: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-349-1894
Metal Grille

123491894
88521 15488: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-199-0323
Nonmetallic Bumper

121990323
2044760081: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-370-3197
Mounting Bracket

123703197
131 0096: RNCC: 3 | RNVC: 2
1310096: RNCC: 5 | RNVC: 2

25 Oct 2006

5340-12-130-1148

5340-12-022-1099

5340-12-164-1638

5340-12-373-8836
Retaining Band

123738836
4614700240: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-12-385-7927
Mounting Bracket

123857927
5240980939: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-12-318-0019
Mounting Bracket

123180019
81523400319: RNCC: 3 | RNVC: 2
81.52340.0319: RNCC: 5 | RNVC: 2

2 Jun 1989

5340-12-181-1102
Angle Bracket

121811102
81974850109: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-387-5940
Padlock

123875940
46789: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-179-6005
Resilient Mount

121796005
3192400018: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-385-4362
Access Cover

123854362
DF 407 479 AE: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-322-8096
Plain Solid Disk

123228096
8470 032 154: RNCC: 3 | RNVC: 2
8470032154: RNCC: 5 | RNVC: 2
8470032154: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-195-0173
Mending Plate

121950173
4696401: RNCC: 3 | RNVC: 2
469.6401: RNCC: 5 | RNVC: 2

30 Dec 1982

5340-12-320-7638
Resilient Mount

123207638
58500BSTN4090: RNCC: 3 | RNVC: 2
58500.NR40.ST: RNCC: 3 | RNVC: 2
331228996: RNCC: 5 | RNVC: 2
332328996: RNCC: 5 | RNVC: 2

14 Feb 1990

5340-12-342-7925
Recess Handle

123427925
4274 193: RNCC: 3 | RNVC: 2

1 Apr 1997

5340-12-354-1798
Angle Bracket

123541798
03875400: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-198-5302
Case Corner

121985302
5802017-704600.00: RNCC: 2 | RNVC: 2
5802017-704600.00: RNCC: 3 | RNVC: 2
5802017-704600.00: RNCC: 3 | RNVC: 2
5802017-704600.00: RNCC: 5 | RNVC: 9
5802017-704600.00: RNCC: 5 | RNVC: 9

7 Feb 1984

5340-12-175-5783
Angle Bracket

121755783
WW 415 891: RNCC: 2 | RNVC: 2
WW 415 891: RNCC: 3 | RNVC: 9
WW415891: RNCC: 5 | RNVC: 2
WW 415 891: RNCC: 5 | RNVC: 2
WW415891: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-367-3240
Section Block Clamp

123673240
1218 8916: RNCC: 3 | RNVC: 2

4 Aug 2005

5340-12-199-1105
Helical Compression Spring Seat

121991105
2420500042: RNCC: 3 | RNVC: 2
2420500042: RNCC: 5 | RNVC: 2
2420500042: RNCC: 5 | RNVC: 2
0000806159: RNCC: 5 | RNVC: 2

27 Mar 1984

5340-12-383-8844
Mounting Bracket

123838844
60005270: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-174-0227
Spring Holder

121740227
50021461: RNCC: 3 | RNVC: 2
50021461: RNCC: 5 | RNVC: 2
50021461: RNCC: 5 | RNVC: 9
50021461: RNCC: 5 | RNVC: 9

29 May 1978

5340-12-314-2466
Pad Eye

123142466
4032231841: RNCC: 3 | RNVC: 2
403 223 18 41: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-199-3954
Ball Socket Seat

121993954
0009914822: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-303-1010
Rubber Bumper

123031010
861711133: RNCC: 3 | RNVC: 9

25 Feb 1985

5340-12-326-8959
Angle Bracket

123268959
62211244134: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-333-4255
Nonmetallic Bumper

123334255
0049-801056A00C: RNCC: 2 | RNVC: 2
0049-801056A00C: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-335-7939
Mending Plate

123357939
020422: RNCC: 3 | RNVC: 2

17 Sep 1994

5340-12-194-9101
Helical Compression Spring Seat

121949101
2564014: RNCC: 3 | RNVC: 2
2564 014: RNCC: 5 | RNVC: 2

16 Dec 1982

5340-12-382-4519
Dust And Moisture Seal Protective Plug

123824519
09865: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-12-370-0226
Plug Button

123700226
PP 3/8: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-12-361-4601
Webbing Strap

123614601
189143803: RNCC: 2 | RNVC: 2
189143803: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-327-2148
Escutcheon Plate

123272148
1000227-2000.04: RNCC: 2 | RNVC: 2
1000227-2000.04: RNCC: 3 | RNVC: 2

17 Dec 1991

5340-12-040-6606

5340-12-357-9950
Spring Tension Clip

123579950
0079931301: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-12-301-1931
Lock-Release Lever

123011931
MODELL235-U: RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-307-9615
Manual Control Handle

123079615
0061.2100.3: RNCC: 3 | RNVC: 2
PO21003: RNCC: 5 | RNVC: 2

14 Aug 1986

5340-12-345-6395
Mounting Bracket

123456395
TA3008P011: RNCC: 3 | RNVC: 2

7 Apr 1998

5340-12-315-5152
Electrical-Mechanical Equipment Post

123155152
7820359411: RNCC: 3 | RNVC: 2
78203 59411: RNCC: 5 | RNVC: 9

29 Oct 1988

5340-12-190-4443
Resilient Mount

121904443
03347144: RNCC: 3 | RNVC: 2
33045266: RNCC: 5 | RNVC: 2
3347144ED5061-57: RNCC: 5 | RNVC: 2

26 Nov 1981

5340-12-188-3417
Manual Control Handle

121883417
81658804001: RNCC: 3 | RNVC: 2
81.65880.4001: RNCC: 5 | RNVC: 2

1 Jul 1981

5340-12-326-4966
Electrical-Mechanical Equipment Post

123264966
05 284 23: RNCC: 3 | RNVC: 2
0528423: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-12-315-2531
Catch Strike

123152531
3817520311: RNCC: 3 | RNVC: 2
381 752 03 11: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-326-6746
Retaining Strap

123266746
191253139G: RNCC: 3 | RNVC: 2

18 Oct 1991

5340-12-321-6523
Retaining Strap

123216523
293455: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-385-7686
Mounting Plate

123857686
5582377335: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-12-332-6836
Runner

123326836
40142: RNCC: 3 | RNVC: 2

6 Sep 1993

5340-12-334-0983
Access Cover

123340983
01464200: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-12-182-1596
Mounting Bracket

121821596
4115410040: RNCC: 3 | RNVC: 2
411 541 00 40: RNCC: 5 | RNVC: 2

16 Jan 1980

5340-12-183-9370
Mounting Bracket

121839370
181885533: RNCC: 3 | RNVC: 2

3 Jun 1980

5340-12-310-8919
Resilient Mount

123108919
RU51877: RNCC: 3 | RNVC: 2

7 Jul 1987

5340-12-308-7205
Loop Clamp

123087205
490.4640.02: RNCC: 3 | RNVC: 2
490464002: RNCC: 5 | RNVC: 2
490.4640: RNCC: 5 | RNVC: 2

11 Nov 1986

5340-12-392-6600
Section Block Clamp

123926600
15003447: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-391-4213
Mechanical Stop

123914213
M539M179120000: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-323-8282
Mending Plate

123238282
0289 1774: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-166-3119
Spring Tension Clip

121663119
AZ6009G085: RNCC: 3 | RNVC: 2
AZ6009G085: RNCC: 5 | RNVC: 9

23 Jul 1976

5340-12-389-3726
Door Handle

123893726
10222-181736.000.0: RNCC: 2 | RNVC: 2
10222-181736.000.0: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-12-393-2614
Access Cover

123932614
121W066130.000.0: RNCC: 2 | RNVC: 2
121W066130.000.0: RNCC: 3 | RNVC: 2

22 Aug 2013

5340-12-393-0133
Access Cover

123930133
1030124-182065.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-392-2066
Butt Hinge Leaf

123922066
DF 300 596 A: RNCC: 3 | RNVC: 2
DF 300 596 A: RNCC: 5 | RNVC: 2

15 May 2013

5340-12-171-7560
Nonmetallic Bumper

121717560
CF419004A: RNCC: 3 | RNVC: 2
CF 419 004 A: RNCC: 5 | RNVC: 2
CF419004A: RNCC: 5 | RNVC: 2
CF 419 004 A: RNCC: 5 | RNVC: 2
CF 419 004 A: RNCC: 5 | RNVC: 2
CF419004A: RNCC: 5 | RNVC: 2

11 Nov 1977

5340-12-323-4440
Spring Tension Clip

123234440
1249881278: RNCC: 3 | RNVC: 2
453 9120-005: RNCC: 5 | RNVC: 2
453 9120-005: RNCC: 5 | RNVC: 2

27 Nov 1990

5340-12-317-3190
Angle Bracket

123173190
4900064-412.006: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-362-5051
Loop Clamp

123625051
9019A0010-01: RNCC: 3 | RNVC: 2

4 Mar 2004

5340-12-344-6388
Mounting Bracket

123446388
5802285-209000.00: RNCC: 2 | RNVC: 2
5802285-209000.00: RNCC: 3 | RNVC: 2
STA01D8-501: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-12-363-8496
Angle Bracket

123638496
J92226425-002: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-311-8347
Rod End Clevis

123118347
BS336.14.1-65-U: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-12-301-2067
Angle Bracket

123012067
A-295077-407: RNCC: 3 | RNVC: 2
A295077-407: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-324-8134
Mounting Bracket

123248134
702-444720-000-0: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-377-7989
Double Angle Bracket

123777989
3642030340: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-12-332-9903
Dust And Moisture Seal Protective Plug

123329903
3669970186: RNCC: 3 | RNVC: 2
366 997 01 86: RNCC: 5 | RNVC: 2
3669970186: RNCC: 5 | RNVC: 2
3669970186: RNCC: 5 | RNVC: 2

19 Oct 1993

5340-12-196-9900
Angle Bracket

121969900
D234.33.02.02: RNCC: 3 | RNVC: 2
4358607012: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-020-5514

5340-12-125-2707

5340-12-315-8769
Lock-Release Lever

123158769
3819300136: RNCC: 3 | RNVC: 2
381 930 01 36: RNCC: 5 | RNVC: 2

3 Dec 1988

5340-12-387-4328
Clamping Catch

123874328
10014532: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-12-316-5918
Double Angle Bracket

123165918
0242 4795: RNCC: 3 | RNVC: 2
02424795ED0148-16: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-316-1531
Retaining Strap

123161531
3815012720: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-317-2004
Angle Bracket

123172004
3834280140: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-026-1654

5340-12-392-8716
Dust And Moisture Seal Protective Plug

123928716
L134M2803209: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-316-8378
Metal Runner

123168378
4900278-603110.01: RNCC: 2 | RNVC: 2
4900278-603110.01: RNCC: 3 | RNVC: 2

16 Feb 1989

5340-12-300-0030
Strap Fastener Loop

123000030
5802017-701600.00: RNCC: 2 | RNVC: 2
5802017-701600.00: RNCC: 3 | RNVC: 2
5802017-701600.00: RNCC: 3 | RNVC: 2
2-12.012: RNCC: 3 | RNVC: 2
5802017-701600.00: RNCC: 5 | RNVC: 2
5802017-701600.00: RNCC: 5 | RNVC: 9

21 Jun 1984

5340-12-354-0875
Dust And Moisture Seal Protective Cap

123540875
305810-0000.000: RNCC: 3 | RNVC: 2
305810-0000: RNCC: 5 | RNVC: 9

1 Jun 2001

5340-12-305-9244
Dust And Moisture Seal Protective Plug

123059244
H1-RAL6014: RNCC: 3 | RNVC: 2
300F4 RAL601: RNCC: 3 | RNVC: 2
300000490-RAL6014: RNCC: 5 | RNVC: 2
GPN300,F4-RAL6014: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-12-319-9380
Hand Crank

123199380
2808114: RNCC: 3 | RNVC: 2
2808-114: RNCC: 5 | RNVC: 2

20 Nov 1989

5340-12-390-7110
Butt Hinge Leaf

123907110
7145628: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-393-7414
Mechanical Stop

123937414
1094809: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-357-8163
Multiple Angle Bracket

123578163
2300388-250490.001: RNCC: 2 | RNVC: 2
9941701: RNCC: 3 | RNVC: 2
2300388-250490.001: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-198-1576
Angle Bracket

121981576
RP981781: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-354-1794
Mending Plate

123541794
03853601: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-311-1133
Access Cover

123111133
2300074-5895.04: RNCC: 2 | RNVC: 2
2300074-5895.04: RNCC: 3 | RNVC: 2
2300074-5895.04: RNCC: 5 | RNVC: 9

28 Jul 1987

5340-12-390-4099
Electronic Equipment Hardware Kit

123904099
351212200871: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-192-9059
Turnbuckle

121929059
PAN4531A18F1337: RNCC: 3 | RNVC: 2

3 Jun 1982

5340-12-391-4460
Access Cover

123914460
I006004TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-330-3170
Headless Straight Rod

123303170
5219A016: RNCC: 2 | RNVC: 2
5219A016: RNCC: 3 | RNVC: 2
5219A016: RNCC: 5 | RNVC: 2
5219A016: RNCC: 5 | RNVC: 2
5219A016: RNCC: 5 | RNVC: 9

2 Dec 1992

5340-12-374-1753
Angle Bracket

123741753
4375041440: RNCC: 3 | RNVC: 2

25 Jan 2008

5340-12-346-2064
Mounting Bracket

123462064
2996.67.66: RNCC: 3 | RNVC: 2

29 Jun 1998

5340-12-346-1532
Dust And Moisture Seal Protective Cap

123461532
42174: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-308-6537
Angle Bracket

123086537
152-45550: RNCC: 3 | RNVC: 2

3 Nov 1986

5340-12-198-4077
Double Angle Bracket

121984077
27 0323 277: RNCC: 2 | RNVC: 2
9859327: RNCC: 3 | RNVC: 9
27 0323 277: RNCC: 5 | RNVC: 2
27 0323 277: RNCC: 5 | RNVC: 9
270323277: RNCC: 5 | RNVC: 9

25 Jan 1984

5340-12-380-5214
Mounting Bracket

123805214
8831500173: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-359-2914
Strap Fastener Loop

123592914
VE01933: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-12-382-1745
Mounting Bracket

123821745
5230980029: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-163-3162

5340-12-309-4478
Double Angle Bracket

123094478
1700014-10000.10: RNCC: 2 | RNVC: 2
501219: RNCC: 3 | RNVC: 2

26 Jan 1987

5340-12-370-9357
Angle Bracket

123709357
81974860295: RNCC: 3 | RNVC: 2
81.97486-0295: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-12-326-8335
Mending Plate

123268335
0A844.18-31-00-00-005: RNCC: 3 | RNVC: 2

31 Oct 1991

5340-12-337-6801
Double Angle Bracket

123376801
E-5074-403-13: RNCC: 3 | RNVC: 2
E5074-403-13: RNCC: 5 | RNVC: 2

27 Mar 1995

5340-12-365-3496
Mounting Bracket

123653496
2300109-060060.000.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-311-3650
Mending Plate

123113650
P-230229-308: RNCC: 3 | RNVC: 2
P230229-308: RNCC: 5 | RNVC: 2

24 Aug 1987

5340-12-701-7044
Mounting Plate

127017044
VG95211-ML-127017044: RNCC: 2 | RNVC: 2
5.12.7240.2420.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-2054
Door Button

121902054
DIN7463-A1-6ZN: RNCC: 2 | RNVC: 2
A1-6DIN7463GALZN5C: RNCC: 5 | RNVC: 2

11 Nov 1981

5340-12-362-6914
Mounting Plate

123626914
0A807.41-01-02-00-004: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-320-0962
Mounting Bracket

123200962
217216-2000: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-310-2130
Spring Tension Clip

123102130
100418-0803.03: RNCC: 2 | RNVC: 2

22 Apr 1987

5340-12-165-8368
Nonmetallic Bumper

121658368
100429-00000-09-0: RNCC: 2 | RNVC: 2
100429-00000-09-0: RNCC: 3 | RNVC: 2
100429-00000-09-0: RNCC: 3 | RNVC: 2
100429-00000-09-0: RNCC: 5 | RNVC: 9

2 Jul 1976

5340-12-329-5379
Mending Plate

123295379
2500229-197500.000.0: RNCC: 2 | RNVC: 2
2500229-197500.000.0: RNCC: 3 | RNVC: 2

28 Aug 1992

5340-12-174-6103
Loop Clamp

121746103
2124343: RNCC: 3 | RNVC: 2
2124-34-3: RNCC: 5 | RNVC: 2
3082: RNCC: 5 | RNVC: 2

13 Jul 1978

5340-12-145-6185
Elastic Strap

121456185
23176-262144.00.0: RNCC: 2 | RNVC: 2
82300-23176-262144.00.0: RNCC: 3 | RNVC: 2
23176-262144.00.0: RNCC: 5 | RNVC: 2
0841179: RNCC: 5 | RNVC: 2
23176-262144-00-0: RNCC: 5 | RNVC: 2
23176-262144-00-0: RNCC: 5 | RNVC: 9
23176-262144.00.0: RNCC: 5 | RNVC: 9
82300-C215X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-702-5311
Angle Bracket

127025311
VG95211-ML-127025311: RNCC: 2 | RNVC: 2
5.51.7040.0040.13: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-7057
Access Cover

123307057
1866-010000.12.0: RNCC: 3 | RNVC: 9
1866-010000.12.0: RNCC: 3 | RNVC: 9

28 Jan 1993

5340-12-303-2626
Angle Bracket

123032626
P-886763-006: RNCC: 3 | RNVC: 2
P886763-006: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-346-1550
Spring Loaded Cylinder Fastener

123461550
GN617.1-5-AK-NI: RNCC: 3 | RNVC: 2
7804981020AA: RNCC: 5 | RNVC: 2
091-301-0150: RNCC: 5 | RNVC: 2

19 Jun 1998

5340-12-347-2127
Spring Tension Clip

123472127
54.1100.161.00: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-374-2573
Access Cover

123742573
L533M1802051: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-361-4921
Mounting Plate

123614921
1504300: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-387-0601
Mounting Plate

123870601
58291127: RNCC: 3 | RNVC: 2
CV192128: RNCC: 5 | RNVC: 2
58291127: RNCC: 5 | RNVC: 2

2 Nov 2011

5340-12-370-5065
Fahrzeugau Traeger

123705065
7803204500AA: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-188-5076
Buckle

121885076
T50509: RNCC: 3 | RNVC: 2
T50509: RNCC: 5 | RNVC: 9

15 Jul 1981

5340-12-346-0194
Access Cover

123460194
1093078: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-320-1735
Dust And Moisture Seal Protective Plug

123201735
R5030: RNCC: 3 | RNVC: 2

14 Dec 1989

5340-12-194-1238
Recess Handle

121941238
A501056: RNCC: 3 | RNVC: 2

5 Oct 1982

5340-12-353-0525
Angle Bracket

123530525
52.2124.085.01: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-12-358-5479
Angle Bracket

123585479
5411800240: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-353-8845
Lock-Release Lever

123538845
209426: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-353-8588
Angle Bracket

123538588
16001556: RNCC: 3 | RNVC: 2

15 May 2001

5340-12-353-7070
Mounting Bracket

123537070
47365130100: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-300-4910
Plug Button

123004910
4256890339: RNCC: 3 | RNVC: 2

7 Aug 1984

5340-12-025-7402

5340-12-378-3373
Mounting Plate

123783373
41259016: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-349-8224
Dust And Moisture Seal Protective Plug

123498224
31 42 2 314 304: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-303-5805
Plug Button

123035805
538.00-3104.4: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-371-5057
Mounting Plate

123715057
23302-182300.13: RNCC: 2 | RNVC: 2
4-2605-745: RNCC: 3 | RNVC: 2
2605745: RNCC: 5 | RNVC: 2

10 Apr 2007

5340-12-176-1301
Mounting Bracket

121761301
536056-0340.000: RNCC: 3 | RNVC: 2
CF 417 745 C: RNCC: 3 | RNVC: 2
CF 417 745 C: RNCC: 5 | RNVC: 2
CF 417 745 C: RNCC: 5 | RNVC: 2
CF417745C: RNCC: 5 | RNVC: 9
CF417745C: RNCC: 5 | RNVC: 9
536056-0340.000: RNCC: 5 | RNVC: 9
CF417745C: RNCC: 5 | RNVC: 9

9 Nov 1978

5340-12-322-8796
Mounting Plate

123228796
704-121123-001-0: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-12-700-5037
Retaining Strap

127005037
VG95211-ML-127005037: RNCC: 2 | RNVC: 2
5149A-5: RNCC: 3 | RNVC: 2
0500840057709: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-330-1232
Dust And Moisture Seal Protective Plug

123301232
710R1": RNCC: 3 | RNVC: 2
GPN710-R1: RNCC: 5 | RNVC: 9
GPN710-R1": RNCC: 5 | RNVC: 9
GPN710/R1IN: RNCC: 5 | RNVC: 9
GPN710R1IN: RNCC: 5 | RNVC: 9

5 Nov 1992

5340-12-384-1264
Mending Plate

123841264
DIN15058-25X6-1.4571: RNCC: 2 | RNVC: 2

25 Jan 2011

5340-12-352-6498
Retaining Bail

123526498
2192692000: RNCC: 3 | RNVC: 2
219269-2000: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-12-198-1982
Quick Release Plunger

121981982
1300061-150230: RNCC: 2 | RNVC: 2
7835036: RNCC: 3 | RNVC: 2
1300061-150230: RNCC: 5 | RNVC: 2
7835-036: RNCC: 5 | RNVC: 2
1300061-150230: RNCC: 5 | RNVC: 9

29 Dec 1983

5340-12-181-3624
Mounting Plate

121813624
AZ9500T111: RNCC: 3 | RNVC: 2
AZ9500T111: RNCC: 5 | RNVC: 9
1200072-020120-111: RNCC: 5 | RNVC: 9
1200072-020120.111: RNCC: 5 | RNVC: 9
AZ9500T111: RNCC: 5 | RNVC: 9

19 Nov 1979

5340-12-348-8857
Mounting Bracket

123488857
245/7346-46-11-00: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-12-166-8786
Retaining Strap

121668786
5800748-11.123: RNCC: 3 | RNVC: 2
5800748-11-123: RNCC: 5 | RNVC: 9

27 Oct 1976

5340-12-167-0546
Spring Tension Clip

121670546
5801412-5311.008: RNCC: 3 | RNVC: 2
5801412-5311-008: RNCC: 5 | RNVC: 9

13 Nov 1976

5340-12-166-9103
Angle Bracket

121669103
5800875-5111.024: RNCC: 3 | RNVC: 2
5800875-5111-024: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-183-2548
Electrical-Mechanical Equipment Post

121832548
VG95148B5,5XM3X15-ST-B2C: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X15-ST-B2C: RNCC: 3 | RNVC: 2
M3/M3X15WN0425031-ST-B2G: RNCC: 3 | RNVC: 2
56-0049-300-03: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-193-3383
Metal Runner

121933383
5801417-0120.001: RNCC: 3 | RNVC: 2
5801417-0120-001: RNCC: 5 | RNVC: 2

13 Jul 1982

5340-12-182-2225
Platte

121822225
C280-A13-C20: RNCC: 2 | RNVC: 2
C280A13C20: RNCC: 3 | RNVC: 2
C280-A13-C20: RNCC: 5 | RNVC: 2
C280A13C20: RNCC: 5 | RNVC: 2
C280-A13-C20: RNCC: 5 | RNVC: 2

21 Jan 1980

5340-12-302-8072
Electrical-Mechanical Equipment Post

123028072
178.E70.80A-151/RO3: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-330-1181
Retaining Strap

123301181
DIN72571-1X9-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72571-1X9-ST-ZN: RNCC: 5 | RNVC: 2
DIN72571-1X9-ST: RNCC: 5 | RNVC: 9

5 Nov 1992

5340-12-360-4003
Bow Handle

123604003
CBD32555P07: RNCC: 3 | RNVC: 2

19 May 2003

5340-12-312-1285
Access Cover

123121285
209582: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-12-359-7309
Access Cover

123597309
S281M2021207: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-357-1719
Swivel Caster

123571719
9250FTP250P65: RNCC: 3 | RNVC: 2

15 May 2002

5340-12-136-3206
Plain Solid Disk

121363206
114F35004: RNCC: 3 | RNVC: 2
8391810052: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-090-7377

5340-12-339-5280
Plug Button

123395280
81964100560: RNCC: 3 | RNVC: 2
81.96410.0560: RNCC: 5 | RNVC: 2

30 Nov 1995

5340-12-090-0285

5340-12-386-9633
Access Cover

123869633
272-406808: RNCC: 3 | RNVC: 2

20 Oct 2011

5340-12-324-7266
Mounting Bracket

123247266
2500171-465100.00: RNCC: 2 | RNVC: 2
2500171-465100.00: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-12-348-4603
Butt Hinge

123484603
100055669: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-345-1636
Mounting Bracket

123451636
111L14004: RNCC: 3 | RNVC: 2
111 L14 004 E1: RNCC: 5 | RNVC: 2

6 Feb 1998

5340-12-044-0575

5340-12-316-3573
Butt Hinge

123163573
2300035-230450.05A: RNCC: 2 | RNVC: 2
2300035-230450.05A: RNCC: 5 | RNVC: 9
2300035-230450.05A: RNCC: 5 | RNVC: 9

12 Jan 1989

5340-12-344-3474
Loop Clamp

123443474
81974010900: RNCC: 3 | RNVC: 2
81.97401.0900: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-331-9414
Plug Button

123319414
553 1782: RNCC: 3 | RNVC: 2
5531782: RNCC: 5 | RNVC: 2
553 1782: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-12-304-9455
Casement Fastener

123049455
0009800430: RNCC: 3 | RNVC: 2

10 Sep 1985

5340-12-318-3420
Dust And Moisture Seal Protective Cap

123183420
PAN3863H08: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-12-339-0527
Angle Bracket

123390527
4607500014: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-185-6684
Angle Bracket

121856684
42013619: RNCC: 3 | RNVC: 2
42013619ED5059-80: RNCC: 5 | RNVC: 9

23 Oct 1980

5340-12-362-3080
Loop Clamp

123623080
LN9490BM28: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-352-2135
Angle Bracket

123522135
T251M3007204: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-198-7173
Detent Plunger

121987173
4252620074: RNCC: 3 | RNVC: 2
A4252620074: RNCC: 5 | RNVC: 2

22 Feb 1984

5340-12-342-3284
Catch Strike

123423284
581699: RNCC: 3 | RNVC: 2
437002: RNCC: 5 | RNVC: 2
581 699: RNCC: 5 | RNVC: 2

23 Jan 1997

5340-12-165-8434
Schluessel

5340-12-165-9644
Treibstange Riegel

5340-12-165-8745
Festhalte- Klipp

5340-12-343-9415
Mechanical Stop

123439415
23218: RNCC: 3 | RNVC: 2
3766/95 ITEM 11: RNCC: 5 | RNVC: 2
23218: RNCC: 5 | RNVC: 2

18 Aug 1997

5340-12-154-6167
Nonmetallic Bumper

121546167
8202200417: RNCC: 3 | RNVC: 2
8202200417: RNCC: 3 | RNVC: 2
845.8202200417: RNCC: 5 | RNVC: 2
28202200417: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-3553
Rim Latch

123923553
7000119: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-165-9162
Schlieszblech

5340-12-309-4073
Access Cover

123094073
WG 309 006: RNCC: 2 | RNVC: 2
WG 309 006: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-310-6229
Rod End Clevis

123106229
52.0260.012.00: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-353-4095
Loop Clamp

123534095
EN4113F50WH: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-12-369-6306
Mounting Plate

123696306
D18 103 2304: RNCC: 3 | RNVC: 2
18 103 2304: RNCC: 5 | RNVC: 2
181032304: RNCC: 5 | RNVC: 2

3 Aug 2006

5340-12-316-8006
Extension Handle

123168006
GLZ 4798 014 R2: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-12-349-4445
Caster Wheel

123494445
0039933604: RNCC: 3 | RNVC: 2

16 Nov 1999

5340-12-384-8809
Retaining Strap

123848809
MMN325-3/2 D9-10 S235JR: RNCC: 3 | RNVC: 2
700325010105: RNCC: 5 | RNVC: 2

6 Apr 2011

5340-12-334-4186
Angle Bracket

123344186
702-241910-905-0: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-304-3719
Metal Runner

123043719
08-1065-1: RNCC: 3 | RNVC: 2
501 04 193: RNCC: 5 | RNVC: 2
08-1065-01-01: RNCC: 5 | RNVC: 2

10 Jul 1985

5340-12-304-4926
Cremone Bolt

123044926
5801435-512000.01.0: RNCC: 2 | RNVC: 2
5801435-512000.01.0: RNCC: 3 | RNVC: 2

24 Jul 1985

5340-12-186-0831
Resilient Mount

121860831
155008-M4-HD.AL/AM-60: RNCC: 3 | RNVC: 2
GE21-02-8: RNCC: 5 | RNVC: 2
GE21-02-8HDS: RNCC: 5 | RNVC: 2
VG95406-B1-4-Q-H: RNCC: 5 | RNVC: 9
VG95406-B1-4Q-H-AL-NMST: RNCC: 5 | RNVC: 9
GE21-02-8: RNCC: 5 | RNVC: 9

27 Nov 1980

5340-12-701-6528
Loop Clamp

127016528
VG95211-ML-127016528: RNCC: 2 | RNVC: 2
5.12.7207.1006.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-8516
Mounting Bracket

123148516
P-086151-005: RNCC: 3 | RNVC: 2
P086151-005: RNCC: 5 | RNVC: 2

18 Aug 1988

5340-12-171-1200
Catch Strike

121711200
81626800029: RNCC: 3 | RNVC: 2
23230-172447.001.0: RNCC: 5 | RNVC: 9
23230-172447-001-0: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-12-356-1768
Nonmetallic Bumper

123561768
4-219-00/09.98BU: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-309-5012
Resilient Mount

123095012
2-01-007511-01: RNCC: 3 | RNVC: 9

29 Jan 1987

5340-12-322-6911
Mounting Bracket

123226911
3000009-207251.02.0: RNCC: 3 | RNVC: 2
2300264-207.251.02.0: RNCC: 5 | RNVC: 9
A3-248.053-16: RNCC: 5 | RNVC: 9
2300264-207251.02.0: RNCC: 5 | RNVC: 9
A3-248.053-16: RNCC: 5 | RNVC: 9

12 Sep 1990

5340-12-131-7478
Turnbuckle

121317478
DIN1480-SPM16-HAKEN-OESE-TZN600: RNCC: 2 | RNVC: 2
SP-DIN1480-M16-H/OE-TZN600: RNCC: 3 | RNVC: 2
4000016V: RNCC: 5 | RNVC: 2
20.18-M16-TZN600: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-361-3689
Loop Clamp

123613689
DIN3016-1-D1-22X20-W1-2-EPDM: RNCC: 2 | RNVC: 2
06.67300-2236: RNCC: 5 | RNVC: 2
06673002236: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-12-158-9191
Swivel Caster

121589191
441A27R200IZPK: RNCC: 3 | RNVC: 2
441A27R200IZPK: RNCC: 5 | RNVC: 2
441-28-RO/200/20-N: RNCC: 5 | RNVC: 9
441-28R0200-20N: RNCC: 5 | RNVC: 9
441A27R200LZPK: RNCC: 5 | RNVC: 9
441A27R200ZPK: RNCC: 5 | RNVC: 9
441A28R200LZPK: RNCC: 5 | RNVC: 9
200X50X20DIN8458: RNCC: 5 | RNVC: 9
DIN8458B3-200X50B1: RNCC: 5 | RNVC: 9
441A27R200LZPK: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-132-7448
Loop Clamp

121327448
DIN3016-2-G1-38X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-38X20-W1-2: RNCC: 3 | RNVC: 2
SP38/20SKZ: RNCC: 3 | RNVC: 2
1510000038: RNCC: 5 | RNVC: 2
SP38-20SK: RNCC: 5 | RNVC: 2
DIN3016-G1-38X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-G38X20-W1: RNCC: 5 | RNVC: 9
VG95931G38X20W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-1365
Double Angle Bracket

123471365
54.1100.116.02: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-12-317-4671
Shimmy Damper

123174671
302279: RNCC: 3 | RNVC: 2

11 Apr 1989

5340-12-317-6036
Retaining Band

123176036
531906-8030.000: RNCC: 3 | RNVC: 2
531906-8030.000: RNCC: 5 | RNVC: 9

20 Apr 1989

5340-12-315-4749
Hinge Torsion Bar

123154749
6550: RNCC: 3 | RNVC: 2
442101: RNCC: 5 | RNVC: 2
6510135: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-12-179-5896
Angle Bracket

121795896
4254201686: RNCC: 3 | RNVC: 2
A4254201686: RNCC: 5 | RNVC: 2

11 Jul 1979

5340-12-122-3860
Retaining Strap

121223860
3044340643: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-317-4703
Counterbalance Weight

123174703
3124111094: RNCC: 3 | RNVC: 2

11 Apr 1989

5340-12-135-6719

5340-12-179-7936
Catch Strike

121797936
403197230003: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-314-5439
Mounting Bracket

123145439
4245240640: RNCC: 3 | RNVC: 2
424 524 06 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-300-4547
Flush Lock

123004547
6020302: RNCC: 3 | RNVC: 2
78A32R: RNCC: 5 | RNVC: 2

2 Aug 1984

5340-12-043-5936

5340-12-339-4501
Mounting Plate

123394501
4220 306 066: RNCC: 3 | RNVC: 2
4220306066: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-094-9395

5340-12-333-8486
Runner

123338486
532104-8447.000: RNCC: 2 | RNVC: 2
532104-8447.000: RNCC: 3 | RNVC: 2
532104-8447.000: RNCC: 5 | RNVC: 9

17 Feb 1994

5340-12-375-9032
Mounting Bracket

123759032
4608900489: RNCC: 3 | RNVC: 2
A4608900489: RNCC: 5 | RNVC: 9

17 Jul 2008

5340-12-022-7566

5340-12-192-6871
Retaining Strap

121926871
DIN1593-39-1.4571: RNCC: 2 | RNVC: 2
DIN1593-39-1.4571: RNCC: 3 | RNVC: 2
DIN1593-39-1.4571: RNCC: 3 | RNVC: 2
39DIN1593-1-4571: RNCC: 5 | RNVC: 2
39DIN1593-1.4571: RNCC: 5 | RNVC: 2
DIN1593-39-1.4571: RNCC: 5 | RNVC: 2

17 May 1982

5340-12-333-4571
Mending Plate

123334571
1283274: RNCC: 3 | RNVC: 2
1-4037-12-4: RNCC: 5 | RNVC: 2
283274: RNCC: 5 | RNVC: 9

17 Dec 1993

5340-12-194-1807
Dust And Moisture Seal Protective Cap

121941807
956-156-0104: RNCC: 3 | RNVC: 2
0009110030: RNCC: 5 | RNVC: 2
956-156-0104: RNCC: 5 | RNVC: 9
E12X19BN226-PVC,SZ: RNCC: 5 | RNVC: 9

11 Oct 1982

5340-12-324-8140
Webbing Strap

123248140
702-445220-000-0: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-342-1631
Mounting Plate

123421631
6700021-201700.01: RNCC: 2 | RNVC: 2
6700021-201700.01: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-309-0646
Strap Hinge

123090646
NO PRIMARY REF 12-309-0646: RNCC: 3 | RNVC: 2
NR.190-76X82 UNGEBOHRT: RNCC: 5 | RNVC: 9

11 Dec 1986

5340-12-159-3187
Retaining Strap

121593187
C3: RNCC: 3 | RNVC: 2
201-10030: RNCC: 5 | RNVC: 2
531003130: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-6255
Electrical-Mechanical Equipment Post

123116255
S01-102030.04: RNCC: 3 | RNVC: 2

29 Sep 1987

5340-12-341-8355
Loop Clamp

123418355
DIN3015-L-KP-6-R-50,8-PA: RNCC: 2 | RNVC: 2
HRL6KP50,8PA: RNCC: 3 | RNVC: 2
RANR-6 2: RNCC: 3 | RNVC: 2
650,8PA: RNCC: 3 | RNVC: 2
RANR-6 2: RNCC: 5 | RNVC: 2

1 Nov 1996

5340-12-359-3478
Angle Bracket

123593478
009-221.500-012: RNCC: 2 | RNVC: 2
009-221.500-012: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-360-0397
Mounting Plate

123600397
9239674000: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-335-2465
Handle Grip

123352465
11332201: RNCC: 3 | RNVC: 2

1 Aug 1994

5340-12-361-4624
Mounting Bracket

123614624
61403-655: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-364-4305
Mounting Bracket

123644305
54.1107.403.00: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-357-3469
Loop Clamp

123573469
5561769: RNCC: 2 | RNVC: 2
5561769: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-361-7317
Mounting Bracket

123617317
T622M1303111: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-12-377-0989
Cushioning Pad

123770989
1030027-972070.001.0: RNCC: 3 | RNVC: 2
1030027-972070.001.0: RNCC: 5 | RNVC: 2

11 Dec 2008

5340-12-191-4061
Bow Handle

121914061
0.050.404.0: RNCC: 3 | RNVC: 2
0-050-404-0: RNCC: 5 | RNVC: 2

1 Feb 1982

5340-12-351-2237
Friction Catch

123512237
9112.982.4: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-352-5181
Mounting Bracket

123525181
521910-820380.000.0: RNCC: 2 | RNVC: 2
521910-820380.000.0: RNCC: 3 | RNVC: 2
1271530: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-12-360-1377
Nonmetallic Bumper

123601377
0002037383/87: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-316-6137
Rod End Clevis

123166137
3006BDR1040001: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-027-6238

5340-12-198-5304
Case Corner

121985304
5802017-704800.00: RNCC: 2 | RNVC: 2

7 Feb 1984

5340-12-388-0769
Strap Fastener Loop

123880769
5000161969: RNCC: 3 | RNVC: 2
CV135867: RNCC: 5 | RNVC: 2
0161969: RNCC: 5 | RNVC: 2
0161969: RNCC: 5 | RNVC: 9

23 Feb 2012

5340-12-334-9773
Double Angle Bracket

123349773
4110612213: RNCC: 3 | RNVC: 2

7 Jul 1994

5340-12-183-0523
Angle Bracket

121830523
02525323: RNCC: 3 | RNVC: 2
2525323KZ5052-81: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-050-3735

5340-12-090-8066

5340-12-333-3577
Angle Bracket

123333577
81429020171: RNCC: 2 | RNVC: 2
81429020171: RNCC: 3 | RNVC: 2
81.42902.0171: RNCC: 5 | RNVC: 2

6 Dec 1993

5340-12-359-0734
Mounting Bracket

123590734
61 3781 420: RNCC: 3 | RNVC: 2
0008100625: RNCC: 5 | RNVC: 2

13 Dec 2002

5340-12-175-0994
Dust And Moisture Seal Protective Plug

121750994
3819190013: RNCC: 3 | RNVC: 2
3819190013: RNCC: 5 | RNVC: 2

23 Aug 1978

5340-12-345-8584
Spring Tension Clip

123458584
372913: RNCC: 3 | RNVC: 2

6 May 1998

5340-12-314-1116
Mounting Bracket

123141116
4047900214: RNCC: 3 | RNVC: 2
404 790 02 14: RNCC: 5 | RNVC: 2

8 Jun 1988

5340-12-353-9531
Mounting Plate

123539531
590619-8420.000: RNCC: 3 | RNVC: 2
590619-8420.000: RNCC: 5 | RNVC: 2
590619-8420.000: RNCC: 5 | RNVC: 9

22 May 2001

5340-12-366-8982
Mounting Bracket

123668982
TC-1664-05.020.001B: RNCC: 2 | RNVC: 2
TC-1664-05.020.001B: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-360-8667
Dust And Moisture Seal Protective Cover

123608667
83-8200: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-12-315-6651
Mounting Bracket

123156651
510252-3070.000: RNCC: 3 | RNVC: 2
510252-3070: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-176-8781
Spring Tension Clip

121768781
51-6861-610-02: RNCC: 3 | RNVC: 2

20 Dec 1978

5340-12-305-5181
Mending Plate

123055181
2300124-180000.002.0: RNCC: 2 | RNVC: 2
2300124-180000.002.0: RNCC: 3 | RNVC: 2
2300124-180000.002.0: RNCC: 3 | RNVC: 2
2300124-180000.002.0: RNCC: 5 | RNVC: 9

18 Nov 1985

5340-12-186-0454
Dust And Moisture Seal Protective Plug

121860454
2382-023340.03.0: RNCC: 2 | RNVC: 2
4592022109: RNCC: 3 | RNVC: 2
2382-023340.03.0: RNCC: 5 | RNVC: 2
2382-023340.03.0: RNCC: 5 | RNVC: 2
2382-023340-03-0: RNCC: 5 | RNVC: 9
2382-023340.03.0: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-351-7893
Loop Clamp

123517893
DIN3015-LA-K-1R-8-PP-W1: RNCC: 2 | RNVC: 2
RAPR3-108: RNCC: 3 | RNVC: 2
SP108A-PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR3-108: RNCC: 3 | RNVC: 2
330133: RNCC: 5 | RNVC: 2

23 Aug 2000

5340-12-343-4293
Mounting Plate

123434293
C-166942: RNCC: 3 | RNVC: 2
C166942: RNCC: 5 | RNVC: 2

19 Jun 1997

5340-12-301-1629
Case Corner

123011629
A-244813-751: RNCC: 3 | RNVC: 2
A244813-751: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-316-6398
Angle Bracket

123166398
1000192-01 4 01100.01: RNCC: 2 | RNVC: 2
1000192-01 4 01100.01: RNCC: 3 | RNVC: 2
10000-00 0 00200.01: RNCC: 5 | RNVC: 9
1000192-01 4 01100.01: RNCC: 5 | RNVC: 9

30 Jan 1989

5340-12-182-9750
Retaining Strap

121829750
23223-038011-00-0: RNCC: 2 | RNVC: 2
23223-038011-00-0: RNCC: 5 | RNVC: 2
23223-038011.00.0: RNCC: 5 | RNVC: 2
23223-038011.00.0: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-701-2802
Rod End Clevis

127012802
VG95211-ML-127012802: RNCC: 2 | RNVC: 2
5.12.5101.0641.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-374-6940
Mounting Plate

123746940
SK971-171224.000.0: RNCC: 3 | RNVC: 2
7086997: RNCC: 5 | RNVC: 2

7 Mar 2008

5340-12-324-6843
Mounting Bracket

123246843
52820-W12.16: RNCC: 3 | RNVC: 2

15 Mar 1991

5340-12-308-4189
Electrical-Mechanical Equipment Post

123084189
7179101: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-12-323-8223
Access Cover

123238223
2902708M1: RNCC: 3 | RNVC: 2
395 902 517: RNCC: 5 | RNVC: 2

20 Dec 1990

5340-12-378-7936
Angle Bracket

123787936
1534561: RNCC: 3 | RNVC: 2

13 May 2009

5340-12-382-3446
Mounting Bracket

123823446
00605-200000.05: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-025-8864

5340-12-172-8141
Loop Clamp

121728141
PAN6636B16: RNCC: 3 | RNVC: 2

22 Feb 1978

5340-12-333-8318
Rod End Clevis

123338318
93001-162.01: RNCC: 3 | RNVC: 2

16 Feb 1994

Load More Results