What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 65 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 65 of 178

5340-12-328-7896
Webbing Strap

123287896
221-00 471-3: RNCC: 3 | RNVC: 2
79017/026SCHLAUFE1550-1125-71026: RNCC: 3 | RNVC: 2
221-00-471-3: RNCC: 5 | RNVC: 9

24 Jun 1992

5340-12-311-5489
Angle Bracket

123115489
P-086471-419: RNCC: 3 | RNVC: 2
P086471-419: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-166-9644
Haube Halter

121669644
81971010000: RNCC: 3 | RNVC: 2
81.97101.0000: RNCC: 5 | RNVC: 2
261947112: RNCC: 5 | RNVC: 9
261947112: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-390-5632
Nut And Bolt Locking Plate

123905632
EN29S850: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-12-389-5455
Manual Control Lever

123895455
06390-2102.007: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-12-379-9112
Section Block Clamp

123799112
58080159: RNCC: 3 | RNVC: 2
CV169110: RNCC: 5 | RNVC: 2
58080159: RNCC: 5 | RNVC: 2

11 Sep 2009

5340-12-371-1775
Spring Tension Clip

123711775
5083854: RNCC: 3 | RNVC: 2
549198: RNCC: 5 | RNVC: 2

23 Feb 2007

5340-12-195-5209
Access Cover

121955209
3900060662: RNCC: 3 | RNVC: 2

8 Mar 1983

5340-12-179-5494
Angle Bracket

121795494
C381-A27-C50: RNCC: 2 | RNVC: 2
C381A27C50: RNCC: 3 | RNVC: 2
C381-A27-C50: RNCC: 5 | RNVC: 2
C381A27C50: RNCC: 5 | RNVC: 2
C381-A27-C50: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-162-4511
Extension Drawer Slide

121624511
5800748-1172.001: RNCC: 3 | RNVC: 2
5800748-1172-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-3991
Screw Hook

123053991
5800043-1730.01: RNCC: 2 | RNVC: 2
5800043-1730.01: RNCC: 3 | RNVC: 2
5800043-1730-01: RNCC: 5 | RNVC: 2
5800043-1730-01: RNCC: 5 | RNVC: 9
5800043-1730.01: RNCC: 5 | RNVC: 9

31 Oct 1985

5340-12-702-1670
Mounting Plate

127021670
VG95211-ML-127021670: RNCC: 2 | RNVC: 2
30.7100.2131: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-355-5315
Mounting Bracket

123555315
2125-129800A02B: RNCC: 2 | RNVC: 2
2125-129800A02B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-350-4466
Webbing Strap

123504466
79052-2300-GB82000: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-172-6835
Flush Catch Claw

121726835
2504050101: RNCC: 3 | RNVC: 2
23290-033260.001: RNCC: 5 | RNVC: 9
23290-033260-001: RNCC: 5 | RNVC: 9

13 Feb 1978

5340-12-356-6216
Nonmetallic Bumper

123566216
2125-122600A03B: RNCC: 2 | RNVC: 2
2125-122600A03B: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-182-1214
Butt Hinge Leaf

121821214
5801215-55: RNCC: 3 | RNVC: 2
5801215-55: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-320-0062
Loop Clamp

123200062
7C27-22BA: RNCC: 3 | RNVC: 2

27 Nov 1989

5340-12-193-5970
Slide Keeper

121935970
16106-1200: RNCC: 3 | RNVC: 2

9 Aug 1982

5340-12-175-0164
Dust And Moisture Seal Protective Cap

121750164
4X6-1460-02: RNCC: 3 | RNVC: 2

16 Aug 1978

5340-12-305-7623
Bow Handle

123057623
VG95149A90X30-M4AL-FB: RNCC: 2 | RNVC: 2
104787: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-358-2432
Spacing Threaded Standoff

123582432
62582011: RNCC: 3 | RNVC: 2
5.14.351: RNCC: 5 | RNVC: 2

1 Oct 2002

5340-12-386-2577
Mounting Bracket

123862577
1001000108: RNCC: 3 | RNVC: 2
2 0141-272: RNCC: 5 | RNVC: 2

19 Aug 2011

5340-12-300-8843
Angle Bracket

123008843
1423-849.11(4): RNCC: 3 | RNVC: 2

7 Sep 1984

5340-12-356-5142
Access Cover

123565142
CF 235 054 A: RNCC: 2 | RNVC: 2
CF 235 054 A: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-373-3772
Electronic Equipment Hardware Kit

123733772
L761M1002103: RNCC: 3 | RNVC: 2

26 Oct 2007

5340-12-376-1189
Dust And Moisture Seal Protective Plug

123761189
TDP625SW: RNCC: 3 | RNVC: 2

14 Aug 2008

5340-12-372-4117
Dust And Moisture Seal Protective Cap

123724117
11250847100: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-344-4045
Retaining Clip

123444045
R50302: RNCC: 3 | RNVC: 2
R50302: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-316-6061
Retaining Strap

123166061
5560780435: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-394-6162
Bow Handle

123946162
8466071380AA: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-364-1326
Locking Stay

123641326
T621P1002106: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-12-192-3074
Retaining Strap

121923074
BSN2X15X20X2OHNEGEGENPLATTE: RNCC: 3 | RNVC: 2
5220000015: RNCC: 5 | RNVC: 2
BSN2X15X20X2: RNCC: 5 | RNVC: 2
BSN2X15X20X2OHNEGEGEN: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-320-1526
Mounting Bracket

123201526
1624101: RNCC: 3 | RNVC: 2
GZ16241: RNCC: 5 | RNVC: 2

13 Dec 1989

5340-12-123-9332
Loop Clamp

121239332
81974400015: RNCC: 3 | RNVC: 2
6338HE18: RNCC: 5 | RNVC: 2
90.405.00.022: RNCC: 5 | RNVC: 2
9040500022: RNCC: 5 | RNVC: 2
81.97440-0015: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-9316
Access Cover

123289316
2653-180000.10: RNCC: 2 | RNVC: 2
2653-180000.10: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-143-6383
Loop Clamp

121436383
SP8684.47/15SKZ: RNCC: 3 | RNVC: 2
0009953201: RNCC: 5 | RNVC: 2
1418684047: RNCC: 5 | RNVC: 2
SP684-047-15: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-126-4277
Retaining Clip

121264277
61-390: RNCC: 3 | RNVC: 2
65051229210: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-366-4409
Clamping Catch

123664409
35044: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-12-011-5008

5340-12-354-8341
Runner

123548341
5400049-116810.12: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-185-2467
Angle Bracket

121852467
NO PRIMARY REF 12-185-2467: RNCC: 3 | RNVC: 2
06-3-6965LE: RNCC: 5 | RNVC: 9
1-6899-06-3-6965LE: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-346-8372
Mounting Bracket

123468372
5097069: RNCC: 3 | RNVC: 2
5097069/1: RNCC: 5 | RNVC: 9
6F300 0T 024 4228: RNCC: 6 | RNVC: 9

17 Sep 1998

5340-12-322-4879
Mounting Bracket

123224879
8100397-2210: RNCC: 2 | RNVC: 2
8100397-2210: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-319-9306
Mounting Bracket

123199306
4900213-207 100: RNCC: 2 | RNVC: 2
4312 711 23550: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-351-3786
Dust And Moisture Seal Protective Cover

123513786
A3 121-484: RNCC: 3 | RNVC: 2
209914: RNCC: 5 | RNVC: 2

19 Jul 2000

5340-12-358-1095
Double Angle Bracket

123581095
J28130068-403: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-12-702-1716
Mounting Plate

127021716
VG95211-ML-127021716: RNCC: 2 | RNVC: 2
30.7143.150.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-2735
Nonmetallic Bumper

123212735
9000 3139: RNCC: 3 | RNVC: 2

26 Apr 1990

5340-12-321-8997
Rod End Clevis

123218997
038820: RNCC: 3 | RNVC: 9
038820: RNCC: 5 | RNVC: 9

6 Jul 1990

5340-12-322-3579
Double Angle Bracket

123223579
100013038: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-316-5119
Nonmetallic Bumper

123165119
6387952: RNCC: 3 | RNVC: 2

23 Jan 1989

5340-12-359-5957
Dust And Moisture Seal Protective Cap

123595957
0501 317 042: RNCC: 3 | RNVC: 2
330890A1: RNCC: 5 | RNVC: 2

19 Feb 2003

5340-12-327-5130
Mounting Bracket

123275130
S2281.4-28: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-12-334-4190
Angle Bracket

123344190
702-241900-908-0: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-161-4279
Rod End Clevis

121614279
100332-13240.07: RNCC: 2 | RNVC: 2
100332-13240-07: RNCC: 5 | RNVC: 2
100332-13240.07: RNCC: 5 | RNVC: 2
100332-13240-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-3993
Pad Eye

123573993
LSNG-32: RNCC: 3 | RNVC: 2
031740: RNCC: 5 | RNVC: 2
LSNG-32: RNCC: 5 | RNVC: 2
8028087X00: RNCC: 5 | RNVC: 2

17 Jun 2002

5340-12-171-6210
Plain Solid Disk

121716210
81907120307: RNCC: 3 | RNVC: 2
8951506804: RNCC: 5 | RNVC: 2
81.90712-0307: RNCC: 5 | RNVC: 2

28 Oct 1977

5340-12-318-1124
Double Angle Bracket

123181124
6600015-202.002: RNCC: 3 | RNVC: 2

13 Jun 1989

5340-12-316-7457
Gummi- Riemen

123167457
6030008 UND 6030042: RNCC: 3 | RNVC: 2
1101062-06: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-362-0715
Angle Bracket

123620715
J27420225-407: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-356-1929
Access Cover

123561929
V6530-08005-103: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-12-301-9669
Bow Handle

123019669
3816600032: RNCC: 3 | RNVC: 2

21 Nov 1984

5340-12-327-1052
Retaining Band

123271052
160-26993: RNCC: 3 | RNVC: 2
160-26993: RNCC: 5 | RNVC: 9

2 Dec 1991

5340-12-093-7400

5340-12-043-7152

5340-12-136-5261
Spring Tension Clip

121365261
N0143861: RNCC: 3 | RNVC: 2
N143861: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-347-9509
Angle Bracket

123479509
54.0058.570.02: RNCC: 2 | RNVC: 2
54.0058.570.02: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-322-3481
Spring Tension Clip

123223481
311K0009: RNCC: 3 | RNVC: 2
0049885678: RNCC: 5 | RNVC: 2
721 1 83 1U2 1: RNCC: 5 | RNVC: 9

14 Aug 1990

5340-12-322-5159
Pipe Bracket

123225159
4-162615: RNCC: 3 | RNVC: 2
139010: RNCC: 5 | RNVC: 2

29 Aug 1990

5340-12-302-6158
Rubber Bumper

123026158
YK03200478: RNCC: 3 | RNVC: 2
03200478: RNCC: 5 | RNVC: 9
H.B.913SV 1056 1975 03 20 0478: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-312-1368
Access Cover

123121368
2300147-400100.000.0: RNCC: 2 | RNVC: 2
2300147-400100.000.0: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-12-328-9578
Retaining Clip

123289578
2300232-972275.001.0: RNCC: 2 | RNVC: 2
2300232-972275.001.0: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-301-5160
Metal Runner

123015160
1000163-371020.000.0: RNCC: 2 | RNVC: 2
1000163-371020.000.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-383-1784
Mounting Bracket

123831784
121W168040.000.0: RNCC: 2 | RNVC: 2
121W168040.000.0: RNCC: 3 | RNVC: 2
1797252: RNCC: 5 | RNVC: 2

22 Sep 2010

5340-12-305-9376
Lock-Release Lever

123059376
81629102094: RNCC: 3 | RNVC: 2
AU5123-3: RNCC: 5 | RNVC: 2
81.62910.2094: RNCC: 5 | RNVC: 2

10 Jan 1986

5340-12-364-7789
Catch Strike

123647789
54.0084.172.06: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-315-1196
Resilient Mount

123151196
02507884: RNCC: 3 | RNVC: 2
250 7884: RNCC: 5 | RNVC: 2
2507884EE5038-51: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-306-9295
Spring Loaded Cylinder Fastener

123069295
6202262: RNCC: 3 | RNVC: 2

17 Apr 1986

5340-12-306-0138
Angle Bracket

123060138
2660101: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-313-3751
Mounting Bracket

123133751
1077805: RNCC: 2 | RNVC: 2
1077805: RNCC: 3 | RNVC: 2

26 Mar 1988

5340-12-182-1519
Sicherheits Schlosz

121821519
81626410067: RNCC: 3 | RNVC: 2

16 Jan 1980

5340-12-303-4111
Double Angle Bracket

123034111
4252602160: RNCC: 3 | RNVC: 2

20 Mar 1985

5340-12-011-4757

5340-12-166-3588
Retaining Clip

121663588
13626001: RNCC: 3 | RNVC: 2
1269350EE8751-18: RNCC: 5 | RNVC: 2
8751-18-01-88: RNCC: 5 | RNVC: 2
E8751-18-01-88: RNCC: 5 | RNVC: 2
0126 9350: RNCC: 5 | RNVC: 2
1269350: RNCC: 5 | RNVC: 9

31 Aug 1976

5340-12-178-2251
Mounting Bracket

121782251
81517100555: RNCC: 3 | RNVC: 2
81.51710.0555: RNCC: 5 | RNVC: 2
23250-120610-001-0: RNCC: 5 | RNVC: 9
23250-120610.001.0: RNCC: 5 | RNVC: 9

9 Apr 1979

5340-12-333-4615
Butt Hinge

123334615
DIN7958-S80-ST-ZN: RNCC: 2 | RNVC: 2
00705 080 Z: RNCC: 3 | RNVC: 2
705080Z: RNCC: 5 | RNVC: 2
S80DIN7958VERZINKT: RNCC: 5 | RNVC: 2

20 Dec 1993

5340-12-370-2360
Mending Plate

123702360
1997-190000.042.0: RNCC: 2 | RNVC: 2
1997-190000.042.0: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-12-146-8027
Hasp Staple

121468027
801: RNCC: 3 | RNVC: 2
2321-505-6: RNCC: 5 | RNVC: 2
3200021: RNCC: 5 | RNVC: 2
32122: RNCC: 5 | RNVC: 2
2759-011: RNCC: 5 | RNVC: 2
2759011: RNCC: 5 | RNVC: 2
20X29VG75068: RNCC: 5 | RNVC: 9
VG75068-20X29: RNCC: 5 | RNVC: 9
20X29VDA75068: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-7901
Resilient Mount

121657901
DIN95363-E25X30-M6X20-NR55ST: RNCC: 4 | RNVC: 1
515000-25X30-M6X20.NR55ST: RNCC: 5 | RNVC: 2
BG6-40-25N: RNCC: 5 | RNVC: 9
VG95363-E25X30-M6X20-NR55ST: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-319-0635
Mounting Bracket

123190635
5801361-14: RNCC: 2 | RNVC: 2
5801361-14: RNCC: 3 | RNVC: 2
5801361-14: RNCC: 5 | RNVC: 2
5801361-14: RNCC: 5 | RNVC: 2

4 Sep 1989

5340-12-139-7022
Resilient Mount

121397022
845-REM-0101-205.NR40.STZN: RNCC: 3 | RNVC: 2
REM0101-205: RNCC: 3 | RNVC: 2
REM0101-205: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-5691
Mounting Bracket

123505691
2125-111620.43B: RNCC: 2 | RNVC: 2
2125-111620.43B: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-12-356-5235
Detent Plunger

123565235
11.11175-0044: RNCC: 3 | RNVC: 2
11.11174-0196POS023: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-334-9528
Webbing Strap

123349528
52.3109.865.00: RNCC: 3 | RNVC: 2
52.3109.865.00LV: RNCC: 5 | RNVC: 2
000-A3-20X2,0X360-PE-RAL6031: RNCC: 6 | RNVC: 9

6 Jul 1994

5340-12-192-2274
Access Cover

121922274
15801-01: RNCC: 3 | RNVC: 2

1 Apr 1982

5340-12-179-8555
Mending Plate

121798555
490126-22100-08: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-355-9494
Mounting Bracket

123559494
J92220254-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-366-8759
Mounting Bracket

123668759
S252M3114101: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-326-7895
Tee Hinge

123267895
1000227-2200: RNCC: 2 | RNVC: 2
1000227-2200: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-12-186-6609
Door Button

121866609
6020036: RNCC: 3 | RNVC: 2

23 Jan 1981

5340-12-308-6721
Mending Plate

123086721
65256-08001X01: RNCC: 3 | RNVC: 2
65256-08001X01: RNCC: 5 | RNVC: 2

6 Nov 1986

5340-12-179-9890
Dust And Moisture Seal Protective Cap

121799890
980/200: RNCC: 3 | RNVC: 2
9800200: RNCC: 5 | RNVC: 2
980020000: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-169-3230
Access Cover

121693230
0026-0450-000: RNCC: 3 | RNVC: 2
0409-8788-000: RNCC: 5 | RNVC: 2
0026-0450-000: RNCC: 5 | RNVC: 9
0409-8788-000: RNCC: 5 | RNVC: 9

4 May 1977

5340-12-199-4198
Flush Catch Claw

121994198
2300088-311100.01: RNCC: 2 | RNVC: 2
2300088-311100-01: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-382-9327
Access Cover

123829327
5841 300 011: RNCC: 3 | RNVC: 2
81.38104-0145: RNCC: 5 | RNVC: 2
81381040145: RNCC: 5 | RNVC: 2
81.38104-0145: RNCC: 5 | RNVC: 2
81381040145: RNCC: 5 | RNVC: 2

25 Aug 2010

5340-12-321-9987
Retaining Strap

123219987
R99097C: RNCC: 3 | RNVC: 2
R244: RNCC: 5 | RNVC: 2
51.97401-6031: RNCC: 5 | RNVC: 2
51974016031: RNCC: 5 | RNVC: 2
51.97401-6031: RNCC: 5 | RNVC: 2
5000806112: RNCC: 5 | RNVC: 2
91628410: RNCC: 5 | RNVC: 2

16 Jul 1990

5340-12-165-3203
Mending Plate

121653203
307.161-10000.12: RNCC: 3 | RNVC: 2
0307161-10000-12: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-353-8356
Spring Tension Clip

123538356
VG95211-ML-123538356: RNCC: 2 | RNVC: 2
MBCS1172: RNCC: 3 | RNVC: 2

15 May 2001

5340-12-317-7053
Mounting Bracket

123177053
5803476-000100.00: RNCC: 2 | RNVC: 2
5803476-000100.00: RNCC: 3 | RNVC: 2

3 May 1989

5340-12-369-5920
Dust And Moisture Seal Protective Cap

123695920
588.91-736000-100: RNCC: 3 | RNVC: 2

27 Jul 2006

5340-12-300-5355
Butt Hinge Leaf

123005355
8100073-100.07: RNCC: 2 | RNVC: 2
8100073-100.07: RNCC: 5 | RNVC: 9
61.174.102-13: RNCC: 5 | RNVC: 9

11 Aug 1984

5340-12-165-3804
Loop Clamp

121653804
3800028-20: RNCC: 2 | RNVC: 2
3800028-20: RNCC: 5 | RNVC: 9
TL3835-022: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-12-143-4109
Angle Bracket

121434109
RIG02-253: RNCC: 3 | RNVC: 2
RIG02-253: RNCC: 5 | RNVC: 2
RIG02-253: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-9804
Helical Compression Spring Seat

123289804
060393-200-25-10-00: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-314-7539
Loop Clamp

123147539
RSIM42-13/12: RNCC: 3 | RNVC: 2
04418028000: RNCC: 5 | RNVC: 2
4418028000: RNCC: 5 | RNVC: 2

6 Aug 1988

5340-12-360-0041
Mounting Bracket

123600041
9414323740: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-304-7244
Access Hole Frame

123047244
84500 28504: RNCC: 2 | RNVC: 2
8450028504: RNCC: 3 | RNVC: 2
84500 28504: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-323-3724
Retaining Strap

123233724
6010782141: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-12-322-3436
Headless Straight Rod

123223436
2300264-261150.00.0: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-348-7859
Mounting Plate

123487859
1626-180200.001.0: RNCC: 2 | RNVC: 2
1626-180200.001.0: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-12-388-9682
Door Button

123889682
1.65.3210: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-340-2239
Helical Compression Spring Seat

123402239
1.3502-18: RNCC: 3 | RNVC: 2
213351114: RNCC: 5 | RNVC: 2

15 Mar 1996

5340-12-334-4396
Angle Bracket

123344396
104-111000-903-0: RNCC: 2 | RNVC: 2
104-111000-903-0: RNCC: 3 | RNVC: 2

9 May 1994

5340-12-322-3120
Mounting Bracket

123223120
1483.3.28.00: RNCC: 3 | RNVC: 2
1483.328: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-389-4399
Catch Strike

123894399
2300570-261110.05.0: RNCC: 2 | RNVC: 2
2300570-261110.05.0: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-12-372-3448
Mounting Bracket

123723448
15010241: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-12-343-6099
Caster Wheel

123436099
4032260: RNCC: 3 | RNVC: 2

8 Jul 1997

5340-12-340-5184
Access Cover

123405184
5900110033: RNCC: 3 | RNVC: 2
5900110033: RNCC: 5 | RNVC: 2
5900110033: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-140-3078

5340-12-325-6546
Double Angle Bracket

123256546
3015460843: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-354-4142
Dust And Moisture Seal Protective Plug

123544142
V5403: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-302-4136
Rim Lock

123024136
1118800260: RNCC: 3 | RNVC: 2

28 Dec 1984

5340-12-316-8273
Manual Control Handle

123168273
23111-9740.00: RNCC: 2 | RNVC: 2
23111-9740.00: RNCC: 3 | RNVC: 2
23111-9740.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-345-4068
Mending Plate

123454068
54.0053.300.04: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-12-135-7276

5340-12-379-3048
Mounting Bracket

123793048
3433-301100 R: RNCC: 3 | RNVC: 2

13 Jul 2009

5340-12-352-0192
Angle Bracket

123520192
702-468002-905-0: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-12-324-4644
Electrical-Mechanical Equipment Post

123244644
VY906564-29: RNCC: 3 | RNVC: 2
VY3.068-29: RNCC: 5 | RNVC: 2

19 Feb 1991

5340-12-191-1028
Spring Tension Clip

121911028
23114-4321.16: RNCC: 2 | RNVC: 2
23114-4321.16: RNCC: 3 | RNVC: 2
23114-4321.16: RNCC: 3 | RNVC: 2
23114-4321-16: RNCC: 5 | RNVC: 9
23114-4321.16: RNCC: 5 | RNVC: 9
23114-4321-16: RNCC: 5 | RNVC: 9
23114-4321.16: RNCC: 5 | RNVC: 9

12 Jan 1982

5340-12-171-7011
Electrical-Mechanical Equipment Post

121717011
WN02-008: RNCC: 3 | RNVC: 2
VG95148C7XM4X118,5-3.1645.51EQE1: RNCC: 3 | RNVC: 2

7 Nov 1977

5340-12-702-5352
Angle Bracket

127025352
VG95211-ML-127025352: RNCC: 2 | RNVC: 2
5.51.7204.0430.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-386-0293
Butt Hinge

123860293
1002778: RNCC: 3 | RNVC: 2
SK913-110020.000.0: RNCC: 5 | RNVC: 2
4617500421: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-12-346-4204
Angle Bracket

123464204
2300348-060000.059.0: RNCC: 2 | RNVC: 2
2300348-060000.059.0: RNCC: 3 | RNVC: 2
1809908: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-394-4428
Nut And Bolt Head Protective Cap

123944428
5.0008.01-0000.018: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-384-1539
Loop Clamp

123841539
DIN3016-1-D2-22-22X12-W1-2-CR: RNCC: 2 | RNVC: 2

27 Jan 2011

5340-12-360-9383
Mounting Plate

123609383
2500306-195250.000.0: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-188-8944
Rod End Clevis

121888944
5801433-040000.26.0: RNCC: 3 | RNVC: 2
5801433-040000-26-0: RNCC: 5 | RNVC: 2
5801433-040000-26-0: RNCC: 5 | RNVC: 9
5801433-040000.26.0: RNCC: 5 | RNVC: 9

6 Aug 1981

5340-12-391-0442
Angle Bracket

123910442
601283-201100.01: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-154-3401
Webbing Strap

121543401
VG95211-ML-121543401: RNCC: 2 | RNVC: 2
160-72076: RNCC: 3 | RNVC: 2
160-72076: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-9975
Door Button

123619975
1000-10: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-338-6276
Section Block Clamp

123386276
VG95211-ML-123386276: RNCC: 2 | RNVC: 2
VG1373-1009-104: RNCC: 3 | RNVC: 2

4 Aug 1995

5340-12-171-5642
Spacing Threaded Standoff

121715642
PAN5170-08-100: RNCC: 3 | RNVC: 2

26 Oct 1977

5340-12-361-4321
Mounting Plate

123614321
71682-670: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-338-8871
Mending Plate

123388871
4900319-206100.01: RNCC: 2 | RNVC: 2
4900319-206100.01: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-198-5826
Metal Runner

121985826
4900189-330000.00: RNCC: 2 | RNVC: 2
4900189-330000.00: RNCC: 3 | RNVC: 2
4900189-330000.00: RNCC: 3 | RNVC: 2
4900189-330000.00: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-175-8951
Retaining Strap

121758951
5801352-5214.00: RNCC: 2 | RNVC: 2
5801352-5214.00: RNCC: 3 | RNVC: 2
5801352-5214-00: RNCC: 5 | RNVC: 2
5801352-5214-00: RNCC: 5 | RNVC: 2
5801352-5214-00: RNCC: 5 | RNVC: 9

25 Oct 1978

5340-12-356-6328
Mounting Bracket

123566328
J92222234-403: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-320-5442
Mending Plate

123205442
5803505-000600.00: RNCC: 2 | RNVC: 2
5803505-000600.00: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-12-199-7199
Double Angle Bracket

121997199
43712524-301: RNCC: 2 | RNVC: 2
43712524-301: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-380-7729
Angle Bracket

123807729
601245-201700.04: RNCC: 2 | RNVC: 2
601245-201700.04: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-12-192-2608
Butt Hinge Leaf

121922608
4067230451: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-12-352-8928
Loop Clamp

123528928
PAN6636A20: RNCC: 3 | RNVC: 2

3 Jan 2001

5340-12-188-9692
Rod End Clevis

121889692
9436649: RNCC: 3 | RNVC: 2
046874009101: RNCC: 5 | RNVC: 2
F300 0T 001 2860: RNCC: 6 | RNVC: 9

12 Aug 1981

5340-12-334-5557
Resilient Mount

123345557
70.03.17: RNCC: 3 | RNVC: 2
1334: RNCC: 5 | RNVC: 2

24 May 1994

5340-12-173-8601
Helical Compression Spring Seat

121738601
4253250026: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-175-3378
Dust And Moisture Seal Protective Plug

121753378
183711919: RNCC: 3 | RNVC: 2

11 Sep 1978

5340-12-176-8428
Resilient Mount

121768428
33531230258: RNCC: 3 | RNVC: 9

20 Dec 1978

5340-12-196-2552
Retaining Strap

121962552
03666600: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-152-2932

5340-12-353-4248
Angle Bracket

123534248
3100-800: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-359-3994
Manual Control Handle

123593994
51257650082: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-12-357-2684
Handle Grip

123572684
8800180027: RNCC: 3 | RNVC: 2

28 May 2002

5340-12-360-0064
Mounting Bracket

123600064
9415405073: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-316-4769
Bow Handle

123164769
22013.0.08.230.00: RNCC: 2 | RNVC: 2
22013.0.08.230.00: RNCC: 3 | RNVC: 2

19 Jan 1989

5340-12-366-4832
Mounting Bracket

123664832
2 0080-623: RNCC: 3 | RNVC: 2
2 0080-623: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-12-348-1617
Mounting Bracket

123481617
2300262-970174.001.0: RNCC: 2 | RNVC: 2
2300262-970174.001.0: RNCC: 3 | RNVC: 2
1811987: RNCC: 5 | RNVC: 2

27 Apr 1999

5340-12-043-2708

5340-12-333-3450
Rod End Connector

123333450
81427400005: RNCC: 3 | RNVC: 2
81.42740.0005: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-12-370-7903
Electronic Equipment Hardware Kit

123707903
5400049-763109.001: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-173-8604
Helical Compression Spring Seat

121738604
4253250915: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-173-6200
Nonmetallic Bumper

121736200
3353250044: RNCC: 3 | RNVC: 2

26 Apr 1978

5340-12-372-2161
Retaining Clip

123722161
13200: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-12-393-8340
Section Block Clamp

123938340
T290M2202290: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-380-8406
Mounting Bracket

123808406
011175270: RNCC: 3 | RNVC: 2
011175270: RNCC: 3 | RNVC: 9
GE7071T006: RNCC: 5 | RNVC: 2

3 Dec 2009

5340-12-384-2246
Dust And Moisture Seal Protective Cap

123842246
10068513: RNCC: 3 | RNVC: 2
10068513: RNCC: 5 | RNVC: 2

3 Feb 2011

5340-12-320-2405
Double Angle Bracket

123202405
0241 7069: RNCC: 3 | RNVC: 2
02417069EE0148-39: RNCC: 5 | RNVC: 2

21 Dec 1989

5340-12-393-4462
Shimmy Damper

123934462
6829283: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-387-5814
Mounting Plate

123875814
GE9101Z568: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-12-307-3745
Mending Plate

123073745
2421901: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-309-8354
Access Cover

123098354
5804.2003: RNCC: 3 | RNVC: 2

9 Mar 1987

5340-12-312-6991
Mounting Bracket

123126991
2300013-4511.01: RNCC: 2 | RNVC: 2
2300013-4511.01: RNCC: 3 | RNVC: 2
2300013-4511.01: RNCC: 5 | RNVC: 9
9840671: RNCC: 5 | RNVC: 9

28 Jan 1988

5340-12-700-8698
Loop Clamp

127008698
VG95211-ML-127008698: RNCC: 2 | RNVC: 2
155N464-683: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-8350
Mounting Bracket

123548350
5400049-116820.04: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-320-3388
Clamping Catch

123203388
4TL47-32748-001: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-12-325-1162
Shock Mount Pad

123251162
C22107-A302-B82: RNCC: 3 | RNVC: 2

6 May 1991

5340-12-702-0236
Loop Clamp

127020236
VG95211-ML-127020236: RNCC: 2 | RNVC: 2
200N7-60: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-193-5975
Friction Catch

121935975
16113-110.02: RNCC: 3 | RNVC: 2

9 Aug 1982

5340-12-190-2363
Dust And Moisture Seal Protective Cap

121902363
5801544-01106: RNCC: 3 | RNVC: 2

16 Nov 1981

5340-12-174-5138
Mending Plate

121745138
1241-3004.005: RNCC: 2 | RNVC: 2
1241-3004.005: RNCC: 3 | RNVC: 2
1241-3004-005: RNCC: 5 | RNVC: 2
1241-3004-005: RNCC: 5 | RNVC: 9

5 Jul 1978

5340-12-702-1164
Mounting Bracket

127021164
VG95211-ML-127021164: RNCC: 2 | RNVC: 2
30.5314.170.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-184-7738
Double Angle Bracket

121847738
211260836A: RNCC: 3 | RNVC: 2

16 Aug 1980

5340-12-094-4868

5340-12-329-3476
Flush Lock

123293476
4040Z-LINKS: RNCC: 3 | RNVC: 2

8 Aug 1992

5340-12-394-6180
Loop Clamp

123946180
0009954202: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-357-6907
Access Cover

123576907
114306613: RNCC: 3 | RNVC: 2
075619950: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-355-0378
Mounting Plate

123550378
5400049-622320.00: RNCC: 2 | RNVC: 2
5400049-622320.00: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-378-3495
Mounting Bracket

123783495
2500262-250400.002.0: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-339-8547
Mounting Bracket

123398547
1.8535-10: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-12-360-1435
Door Button

123601435
0.25.0577.0: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-168-5472
Helical Compression Spring Retainer

121685472
WW401133C: RNCC: 3 | RNVC: 9
WW401133C: RNCC: 5 | RNVC: 2
WW 401 133 C: RNCC: 5 | RNVC: 2
WW401133C: RNCC: 5 | RNVC: 2
WW 401 133 C: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-300-8849
Plug Button

123008849
1423-351.01(4): RNCC: 3 | RNVC: 2

7 Sep 1984

5340-12-351-2512
Dust And Moisture Seal Protective Plug

123512512
12H3650: RNCC: 3 | RNVC: 2
12 H 3650: RNCC: 5 | RNVC: 2

5 Jul 2000

5340-12-301-6990
Mending Plate

123016990
1000163-571000.001.0: RNCC: 3 | RNVC: 2

3 Nov 1984

5340-12-197-9441
Nonmetallic Bumper

121979441
7718001: RNCC: 3 | RNVC: 2
52-56322-4: RNCC: 5 | RNVC: 2

2 Dec 1983

5340-12-334-0152
Turnbuckle

123340152
S-18136A-23: RNCC: 3 | RNVC: 2
S-18136A-23: RNCC: 3 | RNVC: 2

9 Mar 1994

5340-12-191-4469
Angle Bracket

121914469
4604920841: RNCC: 3 | RNVC: 2
721 1 12 036 1: RNCC: 5 | RNVC: 9

3 Feb 1982

5340-12-181-2273
Angle Bracket

121812273
CF 414 812 A: RNCC: 2 | RNVC: 2
CF 414 812 A: RNCC: 3 | RNVC: 2
CF414812A: RNCC: 5 | RNVC: 2
CF414812A: RNCC: 5 | RNVC: 2
CF414812A: RNCC: 5 | RNVC: 2
CF 414 812 A: RNCC: 5 | RNVC: 2
CF 414 812 A: RNCC: 5 | RNVC: 2

5 Nov 1979

5340-12-329-5889
Mounting Bracket

123295889
358850: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-12-344-5660
Access Cover

123445660
178613: RNCC: 3 | RNVC: 2

7 Nov 1997

5340-12-330-2099
Electrical-Mechanical Equipment Post

123302099
8531219.015: RNCC: 3 | RNVC: 2
0853 1219.015: RNCC: 3 | RNVC: 2
4853 1219.015: RNCC: 5 | RNVC: 2

14 Nov 1992

5340-12-325-8913
Tee Hinge

123258913
100016616: RNCC: 3 | RNVC: 2
100016615TEIL1: RNCC: 5 | RNVC: 2

18 Jul 1991

5340-12-359-7232
Dust And Moisture Seal Protective Cap Set

123597232
6002045: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-301-5810
Rod End Connector

123015810
4178673: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-391-4252
Mounting Bracket

123914252
I008901: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-384-2457
Catch Strike

123842457
1000029418: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-12-392-2242
Manual Control Lever

123922242
3046587: RNCC: 3 | RNVC: 2
03046587: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-191-0944
Helical Compression Spring Seat

121910944
6151840031: RNCC: 3 | RNVC: 2

12 Jan 1982

5340-12-349-7128
Angle Bracket

123497128
FAST-201800.01: RNCC: 2 | RNVC: 2
FAST-201800.01: RNCC: 3 | RNVC: 2

28 Dec 1999

5340-12-701-6446
Angle Bracket

127016446
VG95211-ML-127016446: RNCC: 2 | RNVC: 2
5.12.7204.0580.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-8621
Flare Lock Fastener

121928621
SCL1696/5: RNCC: 3 | RNVC: 2
0019946345: RNCC: 5 | RNVC: 2
7928-16: RNCC: 5 | RNVC: 2
9223385680: RNCC: 5 | RNVC: 2
721 1 68 008 1: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-182-2733
Bow Handle

121822733
VG95149A110X67-M4-NRST-BK: RNCC: 2 | RNVC: 2
1200037-1-023: RNCC: 3 | RNVC: 2
1200037-1.023: RNCC: 5 | RNVC: 2
1200037-1-023: RNCC: 5 | RNVC: 9

23 Jan 1980

5340-12-193-7230
Butt Hinge

121937230
DIN7956-40X1,5-30-ST-BK-U: RNCC: 2 | RNVC: 2
6010065: RNCC: 3 | RNVC: 2
6010065: RNCC: 3 | RNVC: 9
C40X1-5DIN7956ST: RNCC: 5 | RNVC: 2
DIN7956-40X1,5-ST-BK-U: RNCC: 5 | RNVC: 2

25 Aug 1982

5340-12-182-9747
Loop Clamp

121829747
23223-011100-01-0: RNCC: 2 | RNVC: 2
23223-011100-01-0: RNCC: 5 | RNVC: 2
23223-011100.01.0: RNCC: 5 | RNVC: 2
23223-011100.01.0: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-366-5228
Mounting Bracket

123665228
2 0055-103: RNCC: 3 | RNVC: 2
2 0055-103: RNCC: 5 | RNVC: 2

3 May 2005

5340-12-176-4129
Dust And Moisture Seal Protective Cap

121764129
30-79501-0053: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-193-8500
Angle Bracket

121938500
5800822-051211: RNCC: 3 | RNVC: 2

7 Sep 1982

5340-12-702-2453
Angle Bracket

127022453
VG95211-ML-127022453: RNCC: 2 | RNVC: 2
30.7800.30: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-351-3116
Door Button

123513116
2500113-2460.09: RNCC: 2 | RNVC: 2
2500113-2460.09: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-12-352-2748
Rod End Clevis

123522748
VG95211-ML-123522748: RNCC: 2 | RNVC: 2
160-88438-05: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-361-3176
Dust And Moisture Seal Protective Cover

123613176
597.51-140000-000: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-12-361-0825
Support Hook

123610825
588.00-009000-126: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-357-4316
Lock-Release Lever

123574316
06460-2082X25: RNCC: 3 | RNVC: 2
NLM06460-2082X25: RNCC: 5 | RNVC: 2

20 Jun 2002

5340-12-354-8244
Dust And Moisture Seal Protective Plug

123548244
300V18: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-379-3858
Doorstop

123793858
517695: RNCC: 3 | RNVC: 2

17 Jul 2009

5340-12-342-1453
Clamping Catch

123421453
1429L02-2X1BP: RNCC: 3 | RNVC: 2
909681224: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-346-6785
Mounting Plate

123466785
5077 327 008: RNCC: 3 | RNVC: 2

25 Aug 1998

5340-12-375-6452
Ball Socket Seat

123756452
6420910050: RNCC: 3 | RNVC: 2
6420910150: RNCC: 5 | RNVC: 9

19 Jun 2008

5340-12-384-7570
Headless Straight Rod

123847570
WTG750491: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-12-387-9295
Butt Hinge

123879295
7094112: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-319-5624
Door Holder

123195624
731.43.093: RNCC: 3 | RNVC: 2
V731.43.093: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-354-1115
Mechanical Stop

123541115
000000-1002.739: RNCC: 3 | RNVC: 2
000000-1002.739: RNCC: 5 | RNVC: 2
000000-1002.739: RNCC: 5 | RNVC: 9

6 Jun 2001

5340-12-310-5991
Handle Grip

123105991
025103: RNCC: 3 | RNVC: 2
025 103: RNCC: 5 | RNVC: 2
25 103: RNCC: 5 | RNVC: 9

4 Jun 1987

5340-12-358-8882
Angle Bracket

123588882
3833020740: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-354-3418
Dust And Moisture Seal Protective Cap

123543418
800M12X1RAL3000: RNCC: 3 | RNVC: 2
FA08377: RNCC: 5 | RNVC: 2
GPN800M12X1ROUGE: RNCC: 5 | RNVC: 2
GPN800M12X1RAL3000: RNCC: 5 | RNVC: 2

3 Jul 2001

5340-12-151-1316
Loop Clamp

121511316
521D25004E1: RNCC: 3 | RNVC: 2
521D25004: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-314-0855
Mending Plate

123140855
43712650-601: RNCC: 2 | RNVC: 2
43712650-601: RNCC: 3 | RNVC: 2

4 Jun 1988

5340-12-348-1595
Mending Plate

123481595
7731427: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-12-382-7101
Flush Lock

123827101
1811555: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-12-367-8936
Nonmetallic Bumper

123678936
679437: RNCC: 3 | RNVC: 2

29 Oct 2005

5340-12-385-8473
Rod End Clevis

123858473
0009963401: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-12-374-2223
Retaining Strap

123742223
0009956244: RNCC: 3 | RNVC: 2
A0009956244: RNCC: 5 | RNVC: 9

30 Jan 2008

5340-12-384-8792
Mounting Bracket

123848792
61.000.002: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-387-4679
Flush Lock

123874679
6020364: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-12-301-1985
Angle Bracket

123011985
1423-910.86(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-300-3536
Nonmetallic Bumper

123003536
4257270097: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-378-2101
Mounting Bracket

123782101
41213828: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-12-386-6869
Spacing Threaded Standoff

123866869
05.03.123: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-12-351-0655
Loop Clamp

123510655
JN0264F50: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-12-357-8813
Spacing Threaded Standoff

123578813
2300042-250610.002: RNCC: 2 | RNVC: 2
2300042-250610.002: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-12-384-4804
Dust And Moisture Seal Protective Cover

123844804
1687010137: RNCC: 3 | RNVC: 2

28 Feb 2011

5340-12-353-3508
Mounting Bracket

123533508
2995.23.44: RNCC: 2 | RNVC: 2
2995.23.44: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-12-384-8782
Mounting Plate

123848782
M2727004600000: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-354-8295
Mounting Bracket

123548295
2300279-4507.00: RNCC: 2 | RNVC: 2
2300279-4507.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-175-0987
Bow Handle

121750987
582K0651: RNCC: 3 | RNVC: 2
E582K0651: RNCC: 5 | RNVC: 2
3818150036: RNCC: 5 | RNVC: 2

23 Aug 1978

5340-12-309-7771
Access Cover

123097771
5058891: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-359-4373
Loop Clamp

123594373
DIN3016-1-D2-7-7X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-183-1725
Metal Runner

121831725
844-30-110000007-0B: RNCC: 3 | RNVC: 2
0B844-30-11-00-00-007: RNCC: 5 | RNVC: 2

25 Mar 1980

5340-12-175-9103
Catch Strike

121759103
5800121-1000-005: RNCC: 3 | RNVC: 2

25 Oct 1978

5340-12-189-4670
Mounting Plate

121894670
5801479-3025.03: RNCC: 2 | RNVC: 2
5801479-3025.03: RNCC: 3 | RNVC: 2
5801479-3025-03: RNCC: 5 | RNVC: 2
5801479-3025-03: RNCC: 5 | RNVC: 9
5801479-3025.03: RNCC: 5 | RNVC: 9

29 Sep 1981

5340-12-306-0777
Angle Bracket

123060777
P-244584-062: RNCC: 3 | RNVC: 2
P244584-062: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-188-7484
Rod End Connector

121887484
A-245861-007: RNCC: 3 | RNVC: 2
A245861-007: RNCC: 5 | RNVC: 2

28 Jul 1981

5340-12-701-5966
Mounting Bracket

127015966
VG95211-ML-127015966: RNCC: 2 | RNVC: 2
5.12.6501.1830.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-0825
Dust And Moisture Seal Protective Cap

121740825
11-04779-3-4: RNCC: 3 | RNVC: 2
110477900: RNCC: 5 | RNVC: 2
000421020A: RNCC: 5 | RNVC: 2
300-591-502P: RNCC: 5 | RNVC: 2

6 Jun 1978

5340-12-372-1225
Loop Clamp

123721225
DIN3016-1 A1-25X12-W1: RNCC: 2 | RNVC: 2
RS1.25-12W1: RNCC: 3 | RNVC: 2
VG95931-A25X12-W1: RNCC: 5 | RNVC: 9

20 Jun 2007

5340-12-360-8582
Door Button

123608582
1.306-0100.00: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-12-368-2499
Mounting Bracket

123682499
SK688-203021-000.0: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-12-330-5220
Handle Grip

123305220
17 1020.00.01: RNCC: 3 | RNVC: 2
582080: RNCC: 5 | RNVC: 2
65722.1: RNCC: 5 | RNVC: 2
520453: RNCC: 5 | RNVC: 2
520453: RNCC: 5 | RNVC: 2
17 1020.99.01: RNCC: 5 | RNVC: 2
17-1020.00.01: RNCC: 5 | RNVC: 2
1710209901: RNCC: 5 | RNVC: 2
65722-1: RNCC: 5 | RNVC: 2

4 Jan 1993

5340-12-301-4431
Electrical-Mechanical Equipment Post

123014431
VG95148B5,5XM2X8-2.0380.30: RNCC: 2 | RNVC: 2
VG95148B5,5XM2X8-2.0380.30: RNCC: 3 | RNVC: 2
8.8701.00-04-10-AUSF2: RNCC: 3 | RNVC: 2

13 Oct 1984

5340-12-350-1928
Retaining Strap

123501928
105-23333.07: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-12-357-5183
Mounting Bracket

123575183
0009700114: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-163-7405
Loop Clamp

121637405
LN9491BM45: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-319-5276
Double Angle Bracket

123195276
504335: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-389-9846
Mounting Bracket

123899846
5842005140: RNCC: 3 | RNVC: 2

20 Sep 2012

5340-12-391-5984
Mounting Bracket

123915984
S252M3178107: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-371-0379
Dust And Moisture Seal Protective Cap

123710379
E9358020001: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-12-167-8669
Nonmetallic Bumper

121678669
395902224: RNCC: 3 | RNVC: 9
395902224: RNCC: 5 | RNVC: 9

26 Jan 1977

5340-12-323-4687
Plain Solid Disk

123234687
7392685: RNCC: 3 | RNVC: 2

28 Nov 1990

5340-12-385-4810
Mounting Bracket

123854810
XP52717300059: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-12-314-4010
Double Angle Bracket

123144010
272.304 893: RNCC: 2 | RNVC: 2
272.304.893: RNCC: 3 | RNVC: 2
272.304 893: RNCC: 5 | RNVC: 9

2 Jul 1988

5340-12-359-2491
Mounting Bracket

123592491
15798001: RNCC: 3 | RNVC: 2

15 Jan 2003

5340-12-350-3746
Access Cover

123503746
105-201781.02: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-12-365-2763
Loop Clamp

123652763
6204900441: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-374-7068
Dust And Moisture Seal Protective Cap

123747068
184081803: RNCC: 3 | RNVC: 2

10 Mar 2008

5340-12-010-8453

5340-12-090-6276

5340-12-380-3545
Electronic Equipment Hardware Kit

123803545
FIXIERUNG RACK TYP 3: RNCC: 3 | RNVC: 2
FIXIERUNG RACK TYP 3: RNCC: 5 | RNVC: 2

22 Oct 2009

5340-12-365-1341
Mounting Bracket

123651341
1837-191300.002.0: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-359-8310
Nonmetallic Bumper

123598310
2500262-830200.003.0: RNCC: 2 | RNVC: 2
2500262-830200.003.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-156-3111
Retaining Clip

121563111
147793002: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-2662
Mending Plate

123222662
54.2055.830.09: RNCC: 3 | RNVC: 2

7 Aug 1990

5340-12-351-4635
Mending Plate

123514635
10063-220000.07: RNCC: 3 | RNVC: 2
10063-220000.07: RNCC: 5 | RNVC: 9

29 Jul 2000

5340-12-333-4034
Butt Hinge

123334034
100016690: RNCC: 3 | RNVC: 2
10 0016 690: RNCC: 5 | RNVC: 2
3522 589 08203: RNCC: 5 | RNVC: 2
352258908203: RNCC: 5 | RNVC: 2

10 Dec 1993

5340-12-361-4913
Access Door Hinge

123614913
05011801: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-388-2257
Bumper

123882257
68559215: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-12-351-0469
Mounting Bracket

123510469
7802497041: RNCC: 3 | RNVC: 2
78024 97041: RNCC: 5 | RNVC: 9

19 Jun 2000

5340-12-137-1047

5340-12-352-6134
Bow Handle

123526134
2430.310: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-346-7535
Retaining Bail

123467535
8680.1201: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-314-8237
Swivel Caster

123148237
LK-STAK125: RNCC: 3 | RNVC: 2

13 Aug 1988

5340-12-307-6962
Loop Clamp

123076962
454.311: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-325-0263
Protection Bellows

123250263
0417 2371: RNCC: 3 | RNVC: 2
50008970: RNCC: 5 | RNVC: 2

23 Apr 1991

5340-12-416-6336

5340-12-366-4254
Mounting Bracket

123664254
2 0068-221: RNCC: 3 | RNVC: 2
2 0068-221: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-12-381-0130
Mounting Bracket

123810130
5.034-871.0: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-12-368-5473
Mounting Plate

123685473
1030099-183300.001.0: RNCC: 2 | RNVC: 2
1030099-183300.001.0: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-12-310-2672
Angle Bracket

123102672
2300088-711023.03: RNCC: 2 | RNVC: 2
9851470: RNCC: 3 | RNVC: 2
9851470: RNCC: 5 | RNVC: 9

30 Apr 1987

5340-12-314-0852
Mending Plate

123140852
43712645-601: RNCC: 2 | RNVC: 2
43712645-601: RNCC: 3 | RNVC: 2

4 Jun 1988

5340-12-390-6174
Mending Plate

123906174
1Z9023.06220: RNCC: 3 | RNVC: 2
7118324: RNCC: 5 | RNVC: 2

28 Nov 2012

5340-12-386-4362
Spacing Threaded Standoff

123864362
1030001-122000.05: RNCC: 2 | RNVC: 2
1030001-122000.05: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-12-309-7914
Access Cover

123097914
4024113: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-311-7623
Lock-Release Lever

123117623
2300074-4183.03: RNCC: 2 | RNVC: 2
2300074-4183.03: RNCC: 3 | RNVC: 2
2300074-4183.03: RNCC: 5 | RNVC: 9

15 Oct 1987

5340-12-394-4492
Retaining Strap

123944492
7222741: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-342-6183
Friction Catch

123426183
631802: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-349-6600
Access Cover

123496600
8464.1300: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-350-1806
Mounting Bracket

123501806
23176-209260.00.0: RNCC: 2 | RNVC: 2
23176-209260.00.0: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-12-164-4124
Retaining Strap

121644124
8433891: RNCC: 3 | RNVC: 2
0047-073: RNCC: 5 | RNVC: 2
0047073: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-302-0950
Mending Plate

123020950
9840357: RNCC: 3 | RNVC: 2
2300164-291120.000: RNCC: 5 | RNVC: 9
9840357: RNCC: 5 | RNVC: 9
2300164-291120-000: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-12-188-3505
Resilient Mount

121883505
H64-BAM-15: RNCC: 3 | RNVC: 2
H64-BAM-15: RNCC: 5 | RNVC: 9
H64BAM15: RNCC: 5 | RNVC: 9

2 Jul 1981

5340-12-355-7304
Mounting Bracket

123557304
P-876386-021: RNCC: 3 | RNVC: 2
P876386-021: RNCC: 5 | RNVC: 2

11 Dec 2001

5340-12-701-6559
Mounting Bracket

127016559
VG95211-ML-127016559: RNCC: 2 | RNVC: 2
5.12.7208.3390.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-1967
Access Cover

123861967
2500261-187810.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-368-4772
Access Cover

123684772
51082030008: RNCC: 3 | RNVC: 2
51.08203-0008: RNCC: 5 | RNVC: 2

15 Mar 2006

5340-12-701-5437
Angle Bracket

127015437
VG95211-ML-127015437: RNCC: 2 | RNVC: 2
5.12.6110.8011.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-6580
Detent Plunger

121966580
AFG014304: RNCC: 3 | RNVC: 2
AFG-06-59-00-00-07: RNCC: 5 | RNVC: 2

28 Jul 1983

5340-12-388-7642
Mechanic Equipment Hardware Kit

123887642
601250-201800.00: RNCC: 2 | RNVC: 2
601250-201800.00: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-169-1696
Spring Tension Clip

121691696
CF446664: RNCC: 3 | RNVC: 2
CF 446 664: RNCC: 5 | RNVC: 2
CF 446 664: RNCC: 5 | RNVC: 2
CF446664: RNCC: 5 | RNVC: 2
CF 446 664: RNCC: 5 | RNVC: 2
CF446664: RNCC: 5 | RNVC: 2

20 Apr 1977

5340-12-310-4693
Metal Runner

123104693
5800884-7111.010: RNCC: 3 | RNVC: 2

25 May 1987

5340-12-301-5764
Mending Plate

123015764
4199093: RNCC: 3 | RNVC: 2
S12B.E01.04.00.008: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-094-6993

5340-12-315-3589
Mounting Bracket

123153589
1000173-190320.000.0: RNCC: 2 | RNVC: 2
1000173-190320.000.0: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-12-375-6796
Dust And Moisture Seal Protective Plug

123756796
105-50101.6: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-384-6866
Headless Grooved Rod

123846866
7122350: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-12-348-6146
Mounting Bracket

123486146
NN31144G01: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-12-321-9114
Angle Bracket

123219114
GLZ9300274R1: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-192-3632
Helical Compression Spring Seat

121923632
8200 1800 0101 06: RNCC: 3 | RNVC: 2

19 Apr 1982

5340-12-173-8534
Loop Clamp

121738534
PAN4231BBDED7222: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-320-7609
Lock-Release Lever

123207609
335909-9009.000: RNCC: 2 | RNVC: 2
335909-9009.000: RNCC: 3 | RNVC: 2
335909-9009.000: RNCC: 5 | RNVC: 9

14 Feb 1990

5340-12-350-0097
Mounting Bracket

123500097
54.1038.066.00: RNCC: 2 | RNVC: 2
54.1038.066.00: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-311-7611
Handle Grip

123117611
83101: RNCC: 3 | RNVC: 2
503959: RNCC: 5 | RNVC: 2

15 Oct 1987

5340-12-314-4205
Electrical-Mechanical Equipment Post

123144205
450.3188: RNCC: 2 | RNVC: 2
4503188: RNCC: 3 | RNVC: 2
450.3188: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-330-0595
Dust And Moisture Seal Protective Plug

123300595
2300223-264046.00.0: RNCC: 3 | RNVC: 2

28 Oct 1992

5340-12-168-6742
Loop Clamp

121686742
WW 200 475 E: RNCC: 2 | RNVC: 2
WW 200 475 E: RNCC: 3 | RNVC: 2
WW200475C: RNCC: 5 | RNVC: 2
WW200475D: RNCC: 5 | RNVC: 2
WW 200 475 C: RNCC: 5 | RNVC: 9
WW 200 475 D: RNCC: 5 | RNVC: 9
WW 200 475 C: RNCC: 5 | RNVC: 9
WW 200 475 D: RNCC: 5 | RNVC: 9
WW 200 475 E: RNCC: 5 | RNVC: 9
WW200475C: RNCC: 5 | RNVC: 9

28 Mar 1977

5340-12-300-7847
Leather Strap

123007847
4357907896: RNCC: 3 | RNVC: 2
4357907896: RNCC: 5 | RNVC: 1

30 Aug 1984

5340-12-190-8760
Helical Compression Spring Seat

121908760
2410320061: RNCC: 3 | RNVC: 2
8690740062: RNCC: 5 | RNVC: 2

21 Dec 1981

5340-12-343-5528
Mounting Bracket

123435528
56010505000: RNCC: 3 | RNVC: 2
F300 0T 022 5257: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-349-8843
Angle Bracket

123498843
54.1038.035.06: RNCC: 2 | RNVC: 2
54.1038.035.06: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-333-7218
Access Cover

123337218
5070810505: RNCC: 3 | RNVC: 2
507 081 05 05: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-12-128-0865

5340-12-043-1912

5340-12-360-9583
Elastic Strap

123609583
82401010: RNCC: 3 | RNVC: 2
08.0901.70: RNCC: 3 | RNVC: 2

31 Jul 2003

5340-12-363-0504
Double Angle Bracket

123630504
81155010564: RNCC: 3 | RNVC: 2
81.15501.0564: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-347-4389
Webbing Strap

123474389
8700130002: RNCC: 3 | RNVC: 2

10 Dec 1998

5340-12-310-2378
Retaining Strap

123102378
6139630: RNCC: 3 | RNVC: 2

24 Apr 1987

5340-12-314-1095
Angle Bracket

123141095
43712643-601: RNCC: 2 | RNVC: 2
43712643-601: RNCC: 3 | RNVC: 2

8 Jun 1988

5340-12-329-4953
Access Cover

123294953
43707132-601: RNCC: 3 | RNVC: 2

25 Aug 1992

5340-12-359-7883
Access Cover

123597883
2500261-183581.000.0: RNCC: 2 | RNVC: 2
2500261-183581.000.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-185-4524
Dust And Moisture Seal Protective Plug

121854524
636390208501-0E: RNCC: 3 | RNVC: 2
C 4157 740: RNCC: 5 | RNVC: 2
C4157740: RNCC: 5 | RNVC: 2
C 4157 740: RNCC: 5 | RNVC: 2
C4157740: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-188-0451
Bridge Clamp

121880451
2300109-182004.002.0: RNCC: 2 | RNVC: 2
2300109-182004.002.0: RNCC: 3 | RNVC: 2
2300109-182004.002.0: RNCC: 3 | RNVC: 2
2300109-182004-002-0: RNCC: 5 | RNVC: 2
2300109-182004-002-0: RNCC: 5 | RNVC: 2
2300109-182004-002-0: RNCC: 5 | RNVC: 9
2300109-182004.002.0: RNCC: 5 | RNVC: 9
2300109-182004.002.0: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-193-4628
Angle Bracket

121934628
2500043-283100.00.0: RNCC: 2 | RNVC: 2
2500043-283100.00.0: RNCC: 3 | RNVC: 2
2500043-283100-00-0: RNCC: 5 | RNVC: 2

22 Jul 1982

5340-12-173-1784
Loop Clamp

121731784
DIN3016-1-B2-45-45X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B2-45-45X15-W1-2: RNCC: 3 | RNVC: 2
RS0.2X45/15: RNCC: 3 | RNVC: 2
4207215045: RNCC: 5 | RNVC: 2
RS2X45-15: RNCC: 5 | RNVC: 2
RS2X45/15: RNCC: 5 | RNVC: 2
DIN3016-B2-45-45X15-W1-2: RNCC: 5 | RNVC: 9

22 Mar 1978

5340-12-321-9401
Nonmetallic Solid Wheel

123219401
8100397-2300/13: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-701-3911
Loop Clamp

127013911
VG95211-ML-127013911: RNCC: 2 | RNVC: 2
5.12.5311.1000.25: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-368-9770
Angle Bracket

123689770
7803221108: RNCC: 3 | RNVC: 2
1030010-721000.008.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-173-0647
Handwheel

121730647
DIN390-B100-AL: RNCC: 2 | RNVC: 2
DIN390-B100-AL: RNCC: 3 | RNVC: 2
B100DIN390AL: RNCC: 5 | RNVC: 2

15 Mar 1978

5340-12-176-3229
Mounting Bracket

121763229
CF446676: RNCC: 3 | RNVC: 2
536056-0914.000: RNCC: 3 | RNVC: 2
CF 446 676: RNCC: 5 | RNVC: 2
CF446676: RNCC: 5 | RNVC: 2
CF 446 676: RNCC: 5 | RNVC: 2
CF446676: RNCC: 5 | RNVC: 2
CF 446 676: RNCC: 5 | RNVC: 2
536056-0914.000: RNCC: 5 | RNVC: 9

23 Nov 1978

5340-12-192-8966
Butt Hinge

121928966
02-0899-181312.02.0: RNCC: 3 | RNVC: 2
02-0899-181312-02-0: RNCC: 5 | RNVC: 2

3 Jun 1982

5340-12-193-7971
Loop Clamp

121937971
DIN3016-1-A1-59X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-59X15-W1-2: RNCC: 3 | RNVC: 2
RS1.59/15: RNCC: 3 | RNVC: 2
4110015059: RNCC: 5 | RNVC: 2
GLZ1416056P5: RNCC: 5 | RNVC: 2
RS1100.59/15: RNCC: 5 | RNVC: 2
DIN3016-A1-59X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-A59X15-W1: RNCC: 5 | RNVC: 9
VG95931A59X15-W1: RNCC: 5 | RNVC: 9

31 Aug 1982

5340-12-301-4363
Casement Fastener

123014363
3-001-36/11210.02: RNCC: 3 | RNVC: 2
3-00136-11210-02: RNCC: 5 | RNVC: 2
3-001-36/11210-02: RNCC: 5 | RNVC: 2
3-001-36/11210-02: RNCC: 5 | RNVC: 9
3-001-36/11210.02: RNCC: 5 | RNVC: 9
3-00136-11210-02: RNCC: 5 | RNVC: 9
897334: RNCC: 8 | RNVC: 2

13 Oct 1984

5340-12-312-2262
Angle Bracket

123122262
5801357-1712.13: RNCC: 2 | RNVC: 2
5801357-1712.13: RNCC: 3 | RNVC: 2
100000306: RNCC: 5 | RNVC: 9

7 Dec 1987

5340-12-332-5007
Handwheel

123325007
03-22-020-17-02: RNCC: 3 | RNVC: 2

17 Aug 1993

5340-12-170-7422
Dust And Moisture Seal Protective Cap

121707422
30-79501-0043: RNCC: 3 | RNVC: 2

3 Aug 1977

5340-12-302-6326
Retaining Strap

123026326
5801101-2751.012: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-180-4956
Threaded End Tensioning Tie Rod

121804956
5900063-210000.04: RNCC: 3 | RNVC: 2
5900063-210000-04: RNCC: 5 | RNVC: 2
5900063-210000.04: RNCC: 5 | RNVC: 9

14 Sep 1979

5340-12-179-9942
Angle Bracket

121799942
WW304333AX: RNCC: 3 | RNVC: 9
WW 304 333 AX: RNCC: 5 | RNVC: 2
WW304333AX: RNCC: 5 | RNVC: 2
WW 304 333 AX: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-12-180-6644
Access Cover

121806644
0288 8048: RNCC: 3 | RNVC: 2
2888048: RNCC: 5 | RNVC: 2
2888048EE0695-78: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-070-1912

5340-12-393-9567
Mounting Bracket

123939567
7189174: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-12-387-4992
Spacing Threaded Standoff

123874992
X51199100015: RNCC: 3 | RNVC: 2

3 Jan 2012

5340-12-377-0931
Angle Bracket

123770931
5502036240: RNCC: 3 | RNVC: 2

11 Dec 2008

5340-12-391-4265
Mounting Bracket

123914265
I008899: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-199-1803
Resilient Mount

121991803
311301265: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-344-4965
Lock-Release Lever

123444965
535.63.900: RNCC: 3 | RNVC: 9

3 Nov 1997

5340-12-354-8653
Dust And Moisture Seal Protective Cap

123548653
8440 040 152: RNCC: 3 | RNVC: 2
06440P006001: RNCC: 5 | RNVC: 2
8440040152: RNCC: 5 | RNVC: 9

30 Aug 2001

5340-12-310-6416
Resilient Mount

123106416
000031005008: RNCC: 3 | RNVC: 2
0002420250: RNCC: 5 | RNVC: 2

11 Jun 1987

5340-12-339-8388
Dust And Moisture Seal Protective Cap

123398388
3390 522 000: RNCC: 3 | RNVC: 2
WSNF 30A11X: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-358-9211
Double Angle Bracket

123589211
3852952840: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-309-3081
Resilient Mount

123093081
06.035.18.203: RNCC: 3 | RNVC: 2
124L84701D1: RNCC: 5 | RNVC: 2
124L84701: RNCC: 5 | RNVC: 2

13 Jan 1987

5340-12-337-2914
Sealing Plug Assembly

123372914
04000400: RNCC: 3 | RNVC: 2
04000400.874: RNCC: 5 | RNVC: 2

13 Feb 1995

5340-12-372-1343
Mounting Bracket

123721343
15004050: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-12-168-1551
Butt Hinge Leaf

121681551
LN9172BF330: RNCC: 2 | RNVC: 2
B15X330LN9172: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-379-5098
Metal Grille

123795098
89141A: RNCC: 3 | RNVC: 2

31 Jul 2009

5340-12-149-8960

5340-12-365-6906
Fuehrungs- Schiene

123656906
9418121875: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-12-380-7018
Angle Bracket

123807018
1121-45031: RNCC: 3 | RNVC: 2

20 Nov 2009

5340-12-390-0501
Loop Clamp

123900501
311737: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-190-7011
Nonmetallic Bumper

121907011
CF 478 198: RNCC: 3 | RNVC: 2
CF 478 198: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-12-155-1670
Rod End Clevis

121551670
160-22687: RNCC: 3 | RNVC: 2
160-22687: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-4000
Multiple Angle Bracket

123554000
4634281240: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-345-2746
Mounting Bracket

123452746
54.0026.263.00: RNCC: 3 | RNVC: 2

24 Feb 1998

5340-12-374-2880
Loop Clamp

123742880
5341256: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-330-2192
Hand Crank

123302192
A2.1639: RNCC: 3 | RNVC: 2
A2 1639: RNCC: 5 | RNVC: 2

17 Nov 1992

5340-12-363-8342
Angle Bracket

123638342
04203836: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-12-363-2912
Mounting Plate

123632912
599.076.009.008: RNCC: 3 | RNVC: 2
81252450170: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-353-4563
Dust And Moisture Seal Protective Cap

123534563
49433: RNCC: 3 | RNVC: 2
37.00273: RNCC: 5 | RNVC: 2

27 Mar 2001

5340-12-307-4823
Angle Bracket

123074823
6100129-90000.001: RNCC: 2 | RNVC: 2
3781329: RNCC: 3 | RNVC: 2

23 Jun 1986

5340-12-125-5389

5340-12-358-0919
Mechanical Stop

123580919
171 881 213B-909: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-022-8532

5340-12-374-2473
Mounting Bracket

123742473
L521M3055205: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-092-4769

5340-12-139-2843

5340-12-184-9967
Nonmetallic Bumper

121849967
CF419950AR: RNCC: 3 | RNVC: 2
CF 419 950 AR: RNCC: 5 | RNVC: 2
CF419950AR: RNCC: 5 | RNVC: 2
CF 419 950 AR: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-353-4449
Retaining Strap

123534449
T531M0531201: RNCC: 3 | RNVC: 2

23 Mar 2001

5340-12-353-8849
Cremone Bolt

123538849
209440: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-173-9598
Compression Cup

121739598
1420551001: RNCC: 3 | RNVC: 2

23 May 1978

5340-12-311-8303
Pad Eye

123118303
4900278-602210.00: RNCC: 2 | RNVC: 2
4900278-602210.00: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-12-177-0156
Pipe Bracket

121770156
51974010174: RNCC: 3 | RNVC: 2
5000283409: RNCC: 5 | RNVC: 2
5000283409: RNCC: 5 | RNVC: 9

3 Jan 1979

5340-12-362-7479
Manual Control Lever

123627479
160-24405: RNCC: 3 | RNVC: 2

26 Mar 2004

5340-12-350-1402
Dust And Moisture Seal Protective Cap

123501402
120901: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-12-301-6733
Mending Plate

123016733
4179466: RNCC: 3 | RNVC: 2
S12B.K02.21.00.001: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-139-8437
Retaining Strap

121398437
177B07023: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-189-7536
Detent Plunger

121897536
3006GVD1030005: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-12-372-4845
Flush Lock

123724845
10060051: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-141-6554

5340-12-332-5660
Webbing Strap

123325660
01802-2-SCHLAUFE-FE500-LE1200: RNCC: 3 | RNVC: 2
01802-2-SCHLAUFE-FE500-LE1200MM: RNCC: 3 | RNVC: 2
01802-2 FE=500 LE=1200: RNCC: 5 | RNVC: 2
01802-2-FE500-LE1200: RNCC: 5 | RNVC: 2
01802-2-FE500MM-LE1200MM: RNCC: 5 | RNVC: 2
79036/SCHLAUFE-1700-500: RNCC: 5 | RNVC: 2
DIN60060-2-25X500X1200-C1/SCHLAU: RNCC: 5 | RNVC: 9

20 Aug 1993

5340-12-702-4542
Mounting Bracket

127024542
VG95211-ML-127024542: RNCC: 2 | RNVC: 2
5.51.0602.1711.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-359-3603
Mounting Bracket

123593603
SK688-131040.000.0: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-348-7036
Angle Bracket

123487036
704-000001-935-0: RNCC: 3 | RNVC: 2

9 Aug 1999

5340-12-703-3070
Mending Plate

127033070
VG95211-ML-127033070: RNCC: 2 | RNVC: 2
5.12.2210.1604.01: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-700-5062
Flush Lock

127005062
VG95211-ML-127005062: RNCC: 2 | RNVC: 2
5.12.0100.8020.00: RNCC: 3 | RNVC: 2
0501400113599: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-701-8019
Angle Bracket

127018019
VG95211-ML-127018019: RNCC: 2 | RNVC: 2
5.12.8102.7950.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-347-0057
Access Cover

123470057
53542-001: RNCC: 3 | RNVC: 2
53 542-001: RNCC: 5 | RNVC: 9

12 Oct 1998

5340-12-146-2152
Retaining Clip

121462152
23114-2451.04: RNCC: 2 | RNVC: 2
23114-2451-04: RNCC: 3 | RNVC: 2
23114-2451-04: RNCC: 5 | RNVC: 9
23114-2451-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-352-8833
Pawl Fastener

123528833
325G-111-G12: RNCC: 3 | RNVC: 2

2 Jan 2001

5340-12-702-5255
Mounting Plate

127025255
VG95211-ML-127025255: RNCC: 2 | RNVC: 2
5.51.7010.0300.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-355-7990
Mounting Bracket

123557990
7637: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-12-382-7902
Dust And Moisture Seal Protective Plug

123827902
GPN300F142: RNCC: 3 | RNVC: 2
300F142: RNCC: 5 | RNVC: 2
A831409900008: RNCC: 5 | RNVC: 2

9 Aug 2010

5340-12-305-5385
Retaining Strap

123055385
3167219: RNCC: 3 | RNVC: 2
316.7219: RNCC: 5 | RNVC: 2

19 Nov 1985

5340-12-309-7094
Lock-Release Lever

123097094
0120802501: RNCC: 3 | RNVC: 2

18 Feb 1987

5340-12-334-1584
Access Cover

123341584
532104-8275.000: RNCC: 3 | RNVC: 2
532104-8275.000: RNCC: 5 | RNVC: 9

5 Apr 1994

5340-12-316-7580
Kunst Gleitschiene

123167580
5800777-8220.08: RNCC: 2 | RNVC: 2
5800777-8220.08: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-325-0393
Webbing Strap

123250393
335948-8211.000: RNCC: 2 | RNVC: 2
335948-8211.000: RNCC: 3 | RNVC: 2
335948-8211.000: RNCC: 5 | RNVC: 9

24 Apr 1991

5340-12-359-7122
Access Cover

123597122
9762611033: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-306-8557
Electrical-Mechanical Equipment Post

123068557
6210105: RNCC: 3 | RNVC: 2

10 Apr 1986

5340-12-316-5511
Spring Holder

123165511
5183803: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-12-357-9168
Blank Panel

123579168
2300042-255155.004: RNCC: 2 | RNVC: 2
2300042-255155.004: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-385-9844
Manual Control Lever

123859844
2481-514230.001.0: RNCC: 2 | RNVC: 2
2481-514230.001.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-320-1802
Mending Plate

123201802
217375-4000: RNCC: 3 | RNVC: 2

15 Dec 1989

5340-12-347-8844
Dust And Moisture Seal Protective Plug

123478844
7760 030 133: RNCC: 3 | RNVC: 2
(241)A39630-114900: RNCC: 5 | RNVC: 2
7760030133: RNCC: 5 | RNVC: 9

3 Mar 1999

5340-12-150-0659

5340-12-023-2973

5340-12-313-1400
Resilient Mount

123131400
81.41720.6002: RNCC: 3 | RNVC: 2
291.511.171: RNCC: 3 | RNVC: 2
600899397: RNCC: 5 | RNVC: 2

5 Mar 1988

5340-12-187-0286
Nonmetallic Bumper

121870286
6084920184: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-354-5159
Strapping Seal

123545159
LN9291B16: RNCC: 2 | RNVC: 2

24 Jul 2001

5340-12-388-6278
Mounting Bracket

123886278
T313D3001101: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-010-8493

5340-12-311-1134
Angle Bracket

123111134
2300074-5204.00: RNCC: 2 | RNVC: 2
2300074-5204.00: RNCC: 3 | RNVC: 2
2300074-5204.00: RNCC: 5 | RNVC: 9

28 Jul 1987

5340-12-388-8600
Dust And Moisture Seal Protective Plug

123888600
2315-3026: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-359-5330
Access Cover

123595330
15778901: RNCC: 3 | RNVC: 2

13 Feb 2003

5340-12-361-6504
Spring Tension Clip

123616504
92 503 55 001: RNCC: 3 | RNVC: 2
0008353334: RNCC: 5 | RNVC: 2

29 Oct 2003

5340-12-329-0460
Loop Clamp

123290460
DIN3015-Z-G2-R-15-15-PP-W1: RNCC: 2 | RNVC: 2
HRZ2A1 15-15PPZN: RNCC: 3 | RNVC: 2
RBPR6-215/15: RNCC: 3 | RNVC: 2
215/15PP-GD-AS: RNCC: 3 | RNVC: 2
6-476-0412: RNCC: 5 | RNVC: 2
215/15 GDII: RNCC: 5 | RNVC: 2
RBPR6-215/15: RNCC: 5 | RNVC: 2

14 Jul 1992

5340-12-360-2109
Mounting Bracket

123602109
W3-2-6-17: RNCC: 3 | RNVC: 9
81424010073: RNCC: 5 | RNVC: 2

17 Apr 2003

5340-12-301-1638
Angle Bracket

123011638
A-243842-003: RNCC: 3 | RNVC: 2
A243842-003: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-322-5875
Folding Stay

123225875
344407727: RNCC: 3 | RNVC: 2
3444.07727: RNCC: 5 | RNVC: 2
1/12-695: RNCC: 5 | RNVC: 2

4 Sep 1990

5340-12-329-6649
Loop Clamp

123296649
DIN3015-LD-4R-28-PP-W1: RNCC: 2 | RNVC: 2
RAPR12-428: RNCC: 3 | RNVC: 2
SM428PP-DP-AS: RNCC: 3 | RNVC: 2
SM428DP-AS: RNCC: 3 | RNVC: 2
RAPR12-428: RNCC: 5 | RNVC: 2

16 Sep 1992

5340-12-195-4728
Retaining Strap

121954728
23111-2405.64: RNCC: 2 | RNVC: 2
23111-2405.64: RNCC: 3 | RNVC: 2
1115267: RNCC: 5 | RNVC: 9
23111-2405.64: RNCC: 5 | RNVC: 9
23111-2405-64: RNCC: 5 | RNVC: 9
23111-2405-64: RNCC: 5 | RNVC: 9
23111-2405.64: RNCC: 5 | RNVC: 9

2 Mar 1983

5340-12-323-9661
Access Cover

123239661
009-039.110-023: RNCC: 3 | RNVC: 2
009-039.110-23: RNCC: 5 | RNVC: 2
12791-110000.023: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-179-1821
Retaining Strap

121791821
5800748-1212.041: RNCC: 3 | RNVC: 2
5800748-1212-041: RNCC: 5 | RNVC: 9

15 Jun 1979

5340-12-368-2821
Loop Clamp

123682821
DIN3016-1-B1-34X20-W1-2: RNCC: 2 | RNVC: 2
RS0.34/20: RNCC: 3 | RNVC: 2
VG95931-B34X20-W1: RNCC: 5 | RNVC: 9

8 Feb 2006

5340-12-357-9949
Nonmetallic Bumper

123579949
0079930001: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-12-360-0034
Manual Control Lever

123600034
9414310039: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-341-3809
Protection Bellows

123413809
2933539M1: RNCC: 3 | RNVC: 2
7130793: RNCC: 5 | RNVC: 2

29 Aug 1996

5340-12-326-6048
Retaining Clip

123266048
2475-9200.08: RNCC: 3 | RNVC: 2
2475-9200.08: RNCC: 5 | RNVC: 2

11 Oct 1991

5340-12-309-7938
Access Cover

123097938
5057682: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-370-5480
Mending Plate

123705480
81413030080: RNCC: 3 | RNVC: 2
81.41303.0080: RNCC: 5 | RNVC: 2

21 Nov 2006

5340-12-379-9482
Mounting Bracket

123799482
96500038: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-306-4046
Electrical-Mechanical Equipment Post

123064046
12884: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-312-2082
Mounting Bracket

123122082
281857540A: RNCC: 3 | RNVC: 2
81.63731.6156: RNCC: 5 | RNVC: 2

3 Dec 1987

5340-12-376-4598
Extension Drawer Slide

123764598
9BEU10279-ARS: RNCC: 3 | RNVC: 2

1 Oct 2008

Load More Results