What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 62 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 62 of 178

5340-12-178-1890
Dust And Moisture Seal Protective Cap

121781890
926088-2: RNCC: 3 | RNVC: 2

26 Mar 1979

5340-12-172-0719
Angle Bracket

121720719
1626756-1: RNCC: 3 | RNVC: 2

19 Dec 1977

5340-12-323-2305
Turnbuckle

123232305
J120460: RNCC: 3 | RNVC: 2

5 Nov 1990

5340-12-186-0657
Rigid Caster

121860657
CF 431 611 A: RNCC: 3 | RNVC: 2
CF 431 611 A: RNCC: 5 | RNVC: 2
CF431611A: RNCC: 5 | RNVC: 2
CF431611A: RNCC: 5 | RNVC: 2

27 Nov 1980

5340-12-340-4148
Webbing Strap

123404148
2300298-973020.000.0: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-393-9654
Mounting Plate

123939654
L281M8853101: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-12-331-8401
Nonmetallic Bumper

123318401
1-213-001-3970: RNCC: 3 | RNVC: 9
81.43706-0024: RNCC: 5 | RNVC: 2
81.43706.0024: RNCC: 5 | RNVC: 2
81437060024: RNCC: 5 | RNVC: 2
1-213-007-3790: RNCC: 5 | RNVC: 9
12130013970: RNCC: 5 | RNVC: 9
12130073790: RNCC: 5 | RNVC: 9
8A0512131H: RNCC: 5 | RNVC: 9

25 Jun 1993

5340-12-300-2183
Retaining Strap

123002183
23114-1900.24: RNCC: 2 | RNVC: 2
23114-1900.24: RNCC: 3 | RNVC: 2
23114-1900-24: RNCC: 5 | RNVC: 9
23114-1900.24: RNCC: 5 | RNVC: 9
23114-1900-24: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-195-6572
Loop Clamp

121956572
DIN3016-1-A1-6X9-W5: RNCC: 2 | RNVC: 2
RS1.6/9-W5: RNCC: 3 | RNVC: 2
DIN3016-A1-6X9-W5: RNCC: 3 | RNVC: 2
RS1.6/9-1.4571: RNCC: 5 | RNVC: 2
4110709006: RNCC: 5 | RNVC: 2
RS1100-6-9-1-4571: RNCC: 5 | RNVC: 2
DIN3016-A1-6X9-W5: RNCC: 5 | RNVC: 9
VG95931-A6X9-1.4571: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-703-3486
Mending Plate

127033486
VG95211-ML-127033486: RNCC: 2 | RNVC: 2
S32-6175-40A: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-700-9244
Loop Clamp

127009244
VG95211-ML-127009244: RNCC: 2 | RNVC: 2
200N7-180: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-352-3894
Butt Hinge

123523894
341.15.501: RNCC: 3 | RNVC: 2
ABS0733-01: RNCC: 5 | RNVC: 2
341-15-501: RNCC: 5 | RNVC: 2
DAN236-01: RNCC: 5 | RNVC: 2

14 Nov 2000

5340-12-187-5175
Multiple Angle Bracket

121875175
5802206-132000-004: RNCC: 2 | RNVC: 2
535.3375: RNCC: 3 | RNVC: 2
5353375: RNCC: 5 | RNVC: 2

13 Apr 1981

5340-12-700-5035
Retaining Strap

127005035
VG95211-ML-127005035: RNCC: 2 | RNVC: 2
5150A-10: RNCC: 3 | RNVC: 2
0500840035139: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-192-2280
Resilient Mount

121922280
1341113000: RNCC: 3 | RNVC: 2
6993600050: RNCC: 5 | RNVC: 2
2K2-BAM-130-G1: RNCC: 5 | RNVC: 2
0565: RNCC: 5 | RNVC: 2
331933470: RNCC: 5 | RNVC: 2
B462K2BAM130G1: RNCC: 5 | RNVC: 2
N14191: RNCC: 5 | RNVC: 9
2K2BAM130G1: RNCC: 5 | RNVC: 9
2K2BAM130G1: RNCC: 5 | RNVC: 9
B462K2BAM130G1: RNCC: 5 | RNVC: 9

1 Apr 1982

5340-12-352-4832
Mending Plate

123524832
1014-0034: RNCC: 3 | RNVC: 2
079089450: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-172-8669
Support Hook

121728669
2623-25MM: RNCC: 3 | RNVC: 2

27 Feb 1978

5340-12-312-8919
Electrical-Mechanical Equipment Post

123128919
6100108-1760.03: RNCC: 2 | RNVC: 2
6100108-1760.03: RNCC: 3 | RNVC: 2
VG95148A12XM5X110-AL-RAL6019: RNCC: 5 | RNVC: 2
VG95148A12XM5X110-AL-RAL6019: RNCC: 5 | RNVC: 2

17 Feb 1988

5340-12-309-6893
Rubber Bumper

123096893
46531454145: RNCC: 3 | RNVC: 9

16 Feb 1987

5340-12-355-0376
Angle Bracket

123550376
5400049-622140.00: RNCC: 2 | RNVC: 2
5400049-622140.00: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-368-3680
Dust And Moisture Seal Protective Cap-Plug

123683680
37024-D10S12: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-12-385-3516
Sliding Block

123853516
5550610014: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-366-5081
Bow Handle

123665081
283 0048-801: RNCC: 3 | RNVC: 2
283 0048-801: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-177-0768
Retaining Strap

121770768
81974010701: RNCC: 3 | RNVC: 2

12 Jan 1979

5340-12-350-3635
Access Cover

123503635
105-21441.01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-180-7277
Retaining Clip

121807277
2101321110: RNCC: 3 | RNVC: 2

28 Sep 1979

5340-12-373-6209
Nut And Bolt Locking Plate

123736209
8809940632: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-12-313-0698
Retaining Strap

123130698
T2334027: RNCC: 3 | RNVC: 2

2 Mar 1988

5340-12-010-7451

5340-12-357-4755
Mounting Plate

123574755
A05107: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-12-198-4372
Catch Strike

121984372
3127250148: RNCC: 3 | RNVC: 2

27 Jan 1984

5340-12-326-1130
Lock-Release Lever

123261130
54.0070.735.04: RNCC: 3 | RNVC: 2

9 Aug 1991

5340-12-385-6156
Angle Bracket

123856156
5562033840: RNCC: 3 | RNVC: 2
5562033540 TEIL 5562033840: RNCC: 5 | RNVC: 2

22 Jun 2011

5340-12-367-4021
Retaining Bail

123674021
943374965: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-12-392-7219
Rod End Clevis

123927219
869146708: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-12-379-5761
Angle Bracket

123795761
S537M3024102: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-12-361-5256
Loop Clamp

123615256
61825180: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-12-309-7922
Access Cover

123097922
6175595: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-333-2107
Double Angle Bracket

123332107
81429025158: RNCC: 2 | RNVC: 2
81.42902.5158: RNCC: 3 | RNVC: 2
81429025158: RNCC: 3 | RNVC: 2

10 Nov 1993

5340-12-326-3789
Door Hook

123263789
1490-5624.00: RNCC: 3 | RNVC: 2
1490-5624.00: RNCC: 5 | RNVC: 2

9 Sep 1991

5340-12-313-8505
Retaining Strap

123138505
3512 711 41672: RNCC: 3 | RNVC: 2
3512 711 4167: RNCC: 5 | RNVC: 2

12 May 1988

5340-12-178-3392
Quick Release Plunger

121783392
CF 833 480 AE: RNCC: 2 | RNVC: 2
CF 833 480 AE: RNCC: 3 | RNVC: 2
CF 301 752 EU: RNCC: 5 | RNVC: 2
CF 833 480 AE: RNCC: 5 | RNVC: 2
CF301752DU: RNCC: 5 | RNVC: 2
CF301752EU: RNCC: 5 | RNVC: 2
CF 301 752 EU: RNCC: 5 | RNVC: 2
CF301752DU: RNCC: 5 | RNVC: 2
CF301752EU: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-377-4315
Bumper

123774315
10089275: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-198-6079
Lock-Release Lever

121986079
5802017-702900.00: RNCC: 2 | RNVC: 2
5802017-702900.00: RNCC: 3 | RNVC: 2
5802017-702900.00: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-156-7964
Spring Tension Clip

121567964
6174171: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-301-3600
Helical Compression Spring Retainer

123013600
4177537: RNCC: 3 | RNVC: 2

10 Oct 1984

5340-12-301-1950
Retaining Strap

123011950
4356167020: RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-362-5438
Metallic Bumper

123625438
0334521010: RNCC: 3 | RNVC: 2
3KK916: RNCC: 5 | RNVC: 2

5 Mar 2004

5340-12-322-0030
Mounting Plate

123220030
CF 454 553 AE: RNCC: 2 | RNVC: 2
CF 454 553 AE: RNCC: 3 | RNVC: 2
CF 454 553 AE: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-12-316-5400
Access Cover

123165400
4900278-603300.01: RNCC: 2 | RNVC: 2
4900278-603300.01: RNCC: 3 | RNVC: 2

24 Jan 1989

5340-12-179-6243
Nonmetallic Bumper

121796243
810201245D: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-308-7047
Access Door

123087047
0535301: RNCC: 3 | RNVC: 2

10 Nov 1986

5340-12-195-4088
Escutcheon Plate

121954088
6644WCO AL: RNCC: 3 | RNVC: 2

21 Feb 1983

5340-12-190-8256
Flush Lock

121908256
5L3743.001.29: RNCC: 3 | RNVC: 2

16 Dec 1981

5340-12-194-7324
Ball Socket Seat

121947324
148723: RNCC: 3 | RNVC: 2
148 723: RNCC: 5 | RNVC: 2

1 Dec 1982

5340-12-300-3120
Butt Hinge

123003120
3097402437: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-335-6276
Access Cover

123356276
54.2546.040.03: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-12-190-8762
Helical Compression Spring Seat

121908762
2410320066: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-351-5053
Angle Bracket

123515053
4617100019: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-301-6747
Access Cover

123016747
4178618: RNCC: 3 | RNVC: 2
S12B.D00.01.00.015: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-324-3805
Mounting Bracket

123243805
2982371037: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-12-177-0185
Resilient Mount

121770185
E1E 31S 55 AL: RNCC: 3 | RNVC: 2
E1E31S55AL: RNCC: 5 | RNVC: 2
VE31HDS55AL: RNCC: 5 | RNVC: 2

3 Jan 1979

5340-12-322-5513
Double Angle Bracket

123225513
54.0062.993.00: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-175-8204
Door Button

121758204
3038700218: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-125-2024

5340-12-313-7390
Spring Tension Clip

123137390
1461290301: RNCC: 3 | RNVC: 2
1461290301: RNCC: 5 | RNVC: 2

29 Apr 1988

5340-12-388-6354
Mounting Bracket

123886354
5842032040: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-194-4835
Strap Hinge

121944835
281843686: RNCC: 3 | RNVC: 2

9 Nov 1982

5340-12-143-6847
Resilient Mount

121436847
8382230412: RNCC: 3 | RNVC: 2
972835001: RNCC: 5 | RNVC: 2
0050060002: RNCC: 5 | RNVC: 2
8382230412: RNCC: 5 | RNVC: 2
972835001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-7790
Door Button

123127790
100000897: RNCC: 2 | RNVC: 2
100000897: RNCC: 3 | RNVC: 2

4 Feb 1988

5340-12-010-8646

5340-12-040-9028

5340-12-190-7206
Metal Runner

121907206
NO PRIMARY REF 12-190-7206: RNCC: 3 | RNVC: 2
7208 120753: RNCC: 5 | RNVC: 9
7208120753: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-701-2119
Mounting Plate

127012119
VG95211-ML-127012119: RNCC: 2 | RNVC: 2
5.12.0604.1120.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-8576
Angle Bracket

123558576
J29120078-003: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-12-153-4487
Loop Clamp

121534487
5800583-096190.072: RNCC: 2 | RNVC: 2
C47195-Z13-C30: RNCC: 3 | RNVC: 2
H12P: RNCC: 3 | RNVC: 2
5N.3821.022.02: RNCC: 5 | RNVC: 2
5N3821-011-71: RNCC: 5 | RNVC: 2
5N3821-022-02: RNCC: 5 | RNVC: 2
5N.3821.022.02: RNCC: 5 | RNVC: 2
211-60129: RNCC: 5 | RNVC: 2
203012102: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-6028
Mounting Bracket

123476028
8854 130-191: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-196-8433
Nonmetallic Solid Wheel

121968433
00465-024-000: RNCC: 3 | RNVC: 2
465-24: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-12-390-4152
Mounting Bracket

123904152
64/1001 POS16: RNCC: 3 | RNVC: 2
TRIO3835-16: RNCC: 5 | RNVC: 9

9 Nov 2012

5340-12-347-4877
Mending Plate

123474877
2300421-151110.002: RNCC: 2 | RNVC: 2
2300421-151110.002: RNCC: 5 | RNVC: 2
2300421-151110.002: RNCC: 5 | RNVC: 9
9916008: RNCC: 5 | RNVC: 9

16 Dec 1998

5340-12-329-7101
Loop Clamp

123297101
R38/081-R38/100: RNCC: 3 | RNVC: 2
51.97401-6050: RNCC: 5 | RNVC: 2
51974016050: RNCC: 5 | RNVC: 2

22 Sep 1992

5340-12-317-2369
Mounting Plate

123172369
5-440-020: RNCC: 3 | RNVC: 2
440 020: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-701-6124
Angle Bracket

127016124
VG95211-ML-127016124: RNCC: 2 | RNVC: 2
5.12.7010.1460.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-4734
Helical Compression Spring Seat

121824734
54-2534-060-06: RNCC: 3 | RNVC: 2

6 Feb 1980

5340-12-350-8241
Spacing Threaded Standoff

123508241
58R118-231-2: RNCC: 3 | RNVC: 2

25 May 2000

5340-12-390-5533
Strap Fastener Loop

123905533
SK1145-977220.003.0: RNCC: 3 | RNVC: 2
7112184: RNCC: 5 | RNVC: 2

23 Nov 2012

5340-12-385-3598
Extension Drawer Slide

123853598
DZ3308-0014-2: RNCC: 3 | RNVC: 2

26 May 2011

5340-12-701-6183
Loop Clamp

127016183
VG95211-ML-127016183: RNCC: 2 | RNVC: 2
5.12.7011.0011.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-5087
Loop Clamp

123235087
DIN3015-Z-A-2R-18-18-PP-W1: RNCC: 2 | RNVC: 2
HRZ2A18-18PP STMBL: RNCC: 3 | RNVC: 2
RBPR1-218/18: RNCC: 3 | RNVC: 2
SP218/18PP-GD-AS: RNCC: 3 | RNVC: 2
DIN3015-ZA2R-18-18PP-W1: RNCC: 5 | RNVC: 2
SP218/18PP-GD-AS: RNCC: 5 | RNVC: 2
0452846: RNCC: 5 | RNVC: 2
0452846: RNCC: 5 | RNVC: 2
RBPR1-218/18: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-371-5603
Mounting Plate

123715603
2300397-050000.003.0: RNCC: 3 | RNVC: 2
1809976: RNCC: 5 | RNVC: 9

18 Apr 2007

5340-12-322-2207
Headless Straight Rod

123222207
1780441: RNCC: 3 | RNVC: 2
1780441: RNCC: 5 | RNVC: 2
1780441-6: RNCC: 5 | RNVC: 2

2 Aug 1990

5340-12-300-3593
Mending Plate

123003593
1300061-100000.02: RNCC: 2 | RNVC: 2
7834770: RNCC: 3 | RNVC: 2
7834-770: RNCC: 5 | RNVC: 2

27 Jul 1984

5340-12-145-0915
Loop Clamp

121450915
1201 8648: RNCC: 3 | RNVC: 2
12018648: RNCC: 5 | RNVC: 2
A26.13041/3.4: RNCC: 5 | RNVC: 2
A26-13041-3-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-2651
Hand Crank

123012651
23302-262000.00: RNCC: 2 | RNVC: 2
2532023: RNCC: 3 | RNVC: 2
2532-023: RNCC: 5 | RNVC: 2
23302-262000: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-12-348-5156
Dust And Moisture Seal Protective Cap

123485156
1000/0857: RNCC: 3 | RNVC: 2
GPN1000/0857: RNCC: 5 | RNVC: 2

8 Jul 1999

5340-12-335-0908
Access Cover

123350908
2500255-190000.008.0: RNCC: 2 | RNVC: 2
2500255-190000.008.0: RNCC: 3 | RNVC: 2
2500255-190000-008-0: RNCC: 5 | RNVC: 2

21 Jul 1994

5340-12-313-9193
Lock-Release Lever

123139193
8439598: RNCC: 3 | RNVC: 2
0014661: RNCC: 5 | RNVC: 2
0014-661: RNCC: 5 | RNVC: 2

20 May 1988

5340-12-152-2971
Nonmetallic Bumper

121522971
5800401-8661.002: RNCC: 2 | RNVC: 2
5800401-8661.002: RNCC: 3 | RNVC: 2
5800401-8661-002: RNCC: 3 | RNVC: 2
5800401-8661-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-7657
Resilient Mount

123187657
2-12-16-3239-01: RNCC: 3 | RNVC: 9
08195015: RNCC: 5 | RNVC: 2

15 Aug 1989

5340-12-357-1550
Multiple Angle Bracket

123571550
J28230165-003: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-004-0171

5340-12-312-9178
Snap Hook

123129178
05796012: RNCC: 3 | RNVC: 9

18 Feb 1988

5340-12-376-7734
Mounting Bracket

123767734
8202003040: RNCC: 3 | RNVC: 2

5 Nov 2008

5340-12-391-4666
Mounting Plate

123914666
I010848: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-134-4490

5340-12-363-0534
Webbing Strap

123630534
2300042-992545.000: RNCC: 2 | RNVC: 2
2300042-992545.000: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-393-5875
Bumper

123935875
20H179: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-186-0356
Dust And Moisture Seal Protective Plug

121860356
WFGS16I: RNCC: 3 | RNVC: 2

25 Nov 1980

5340-12-179-7757
Webbing Strap

121797757
4258600294: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-093-6690

5340-12-179-7760
Webbing Strap

121797760
4258600594: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-383-3778
Spring Tension Clip

123833778
55379: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-12-351-8495
Mounting Plate

123518495
5400051-973220.01: RNCC: 2 | RNVC: 2
5400051-973220.01: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-12-022-1495

5340-12-369-1172
Spring Tension Clip

123691172
7803221302: RNCC: 3 | RNVC: 2

24 May 2006

5340-12-369-8780
Butt Hinge

123698780
045014: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-355-4253
Webbing Strap

123554253
4617902179: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-360-0020
Mounting Bracket

123600020
9414297540: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-317-8848
Access Cover

123178848
40 0166 564: RNCC: 2 | RNVC: 2
40 0166 564: RNCC: 3 | RNVC: 2
40 0166 564: RNCC: 5 | RNVC: 9

23 May 1989

5340-12-040-1442

5340-12-043-1796

5340-12-172-0655
Hand Crank

121720655
1000078-300100: RNCC: 2 | RNVC: 2
1000078-300100: RNCC: 5 | RNVC: 2
1000078-300100: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-010-8477

5340-12-043-5220

5340-12-309-6864
Manual Control Handle

123096864
32721454129: RNCC: 3 | RNVC: 9

16 Feb 1987

5340-12-390-0841
Runner

123900841
DF 306 363 A: RNCC: 3 | RNVC: 2
DF 306 363 A: RNCC: 5 | RNVC: 2

2 Oct 2012

5340-12-310-2750
Mending Plate

123102750
1000104-212300.42: RNCC: 3 | RNVC: 2
1000104-212300.42: RNCC: 5 | RNVC: 9

4 May 1987

5340-12-373-1817
Mending Plate

123731817
8351871140: RNCC: 3 | RNVC: 2

8 Oct 2007

5340-12-094-1163

5340-12-333-4429
Mounting Plate

123334429
1236269: RNCC: 3 | RNVC: 2
1236269: RNCC: 5 | RNVC: 2

15 Dec 1993

5340-12-353-8014
Bail Handle

123538014
263.02: RNCC: 3 | RNVC: 2
263 02: RNCC: 5 | RNVC: 2

10 May 2001

5340-12-356-7485
Double Angle Bracket

123567485
T622M1301209: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-378-3377
Mounting Bracket

123783377
9251693000: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-316-6000
Metal Runner

123166000
23182-8100.03: RNCC: 2 | RNVC: 2
23182-8100.03: RNCC: 3 | RNVC: 2
23182-8100.03: RNCC: 5 | RNVC: 2

27 Jan 1989

5340-12-300-9033
Resilient Mount

123009033
DIN95363-B30X30-NR40ST: RNCC: 2 | RNVC: 2
1.30.30.3.40NR/ST: RNCC: 5 | RNVC: 2
077-22-1030: RNCC: 5 | RNVC: 2
811.010.030.030.08X20.NR40.ST: RNCC: 5 | RNVC: 2
81110-30X30-M8X20.NR40.ST: RNCC: 5 | RNVC: 2
31660/B-BSTN4090: RNCC: 5 | RNVC: 2
31660/V-BSTN4090: RNCC: 5 | RNVC: 2
31660/V-BSMN400: RNCC: 5 | RNVC: 2
VG95363-B30X30-NR40ST: RNCC: 5 | RNVC: 9

11 Sep 1984

5340-12-186-6517
Retaining Clip

121866517
C22136-A1000-C77: RNCC: 3 | RNVC: 2
C22136A1000C77: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-319-9696
Expansion Plug

123199696
DIN442-70: RNCC: 2 | RNVC: 2

23 Nov 1989

5340-12-325-6510
Electrical-Mechanical Equipment Post

123256510
VG95148B5XM3X19,5-ALCUMGPB-ANOD.: RNCC: 2 | RNVC: 2
211.03.07.012.2: RNCC: 3 | RNVC: 2
211.03.07.012: RNCC: 5 | RNVC: 2
211.03.07.012.2: RNCC: 5 | RNVC: 2

26 Jun 1991

5340-12-323-7608
Snap Hook

123237608
42904-136000.03: RNCC: 2 | RNVC: 2
27-04.5: RNCC: 3 | RNVC: 2

14 Dec 1990

5340-12-373-2675
Nonmetallic Bumper

123732675
060301/7373-34-10-03: RNCC: 3 | RNVC: 2
654850: RNCC: 5 | RNVC: 2

16 Oct 2007

5340-12-176-3585
Angle Bracket

121763585
8439865: RNCC: 3 | RNVC: 2
0018-553: RNCC: 5 | RNVC: 2
0018553: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-307-0065
Retaining Strap

123070065
LN29836B1-12: RNCC: 2 | RNVC: 2

28 Apr 1986

5340-12-302-7629
Shimmy Damper

123027629
1-0410-50-538-0: RNCC: 3 | RNVC: 9
2376100100: RNCC: 5 | RNVC: 2
401700124918: RNCC: 5 | RNVC: 2

29 Jan 1985

5340-12-149-3841
Spring Tension Clip

121493841
25704-190700.19.0: RNCC: 2 | RNVC: 2
25704-190700.19.0: RNCC: 3 | RNVC: 2
25704-190700.19.0: RNCC: 3 | RNVC: 2
25704-190700-19-0: RNCC: 5 | RNVC: 2
1179-11.00: RNCC: 5 | RNVC: 2
25704-190700-19-0: RNCC: 5 | RNVC: 9
25704-190700.19.0: RNCC: 5 | RNVC: 9
25704-190700.19.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-8484
Mounting Bracket

123638484
J32320319-401: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-303-9398
Loop Clamp

123039398
DIN3016-1-A1-18X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-18X15-W1-2: RNCC: 3 | RNVC: 2
RS1.18/15: RNCC: 3 | RNVC: 2
RS1100.18/15: RNCC: 5 | RNVC: 2
4110015018: RNCC: 5 | RNVC: 2
025805: RNCC: 5 | RNVC: 2
VG95931-A18X15-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-18X15-W1-2: RNCC: 5 | RNVC: 9

23 May 1985

5340-12-187-5464
Antipilferage Seal

121875464
1423120063: RNCC: 3 | RNVC: 2
91678973: RNCC: 5 | RNVC: 2

13 Apr 1981

5340-12-384-2894
Mechanical Stop

123842894
9239674001: RNCC: 3 | RNVC: 2
23980: RNCC: 5 | RNVC: 2
9239674001: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-326-3473
Dust And Moisture Seal Protective Plug

123263473
620U1B: RNCC: 3 | RNVC: 2
9560171130: RNCC: 5 | RNVC: 2
620U1B: RNCC: 5 | RNVC: 2
GPN620,U1B: RNCC: 5 | RNVC: 9

4 Sep 1991

5340-12-302-8335
Metal Runner

123028335
4900123-5000.04: RNCC: 2 | RNVC: 2
4900123-5000.04: RNCC: 3 | RNVC: 2
4900123-5000.04: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-339-0518
Mounting Plate

123390518
4618682014: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-337-0927
Access Cover

123370927
111G08006: RNCC: 3 | RNVC: 2
111 G08 006: RNCC: 5 | RNVC: 2
111G08006C1: RNCC: 5 | RNVC: 2

18 Jan 1995

5340-12-324-7662
Lock-Release Lever

123247662
2500171-444100.00: RNCC: 2 | RNVC: 2
2500171-444100.00: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-330-0493
Mounting Bracket

123300493
5047501: RNCC: 3 | RNVC: 9
5047501: RNCC: 5 | RNVC: 2
91640398: RNCC: 5 | RNVC: 2

27 Oct 1992

5340-12-151-8962
Nonmetallic Bumper

121518962
113E273: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-316-0009
Resilient Mount

123160009
4603520665: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-345-5982
Mounting Bracket

123455982
01036000: RNCC: 3 | RNVC: 2
01036000.514: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-12-300-2817
Spring Tension Clip

123002817
3149180137: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-302-6772
Flush Lock

123026772
1164620079: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-026-6969

5340-12-330-8745
Protection Bellows

123308745
208468: RNCC: 3 | RNVC: 2
7009914: RNCC: 5 | RNVC: 2
208468: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-12-321-8949
Butt Hinge Leaf

123218949
0900101: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-12-180-5260
Spring Tension Clip

121805260
SCA5628: RNCC: 3 | RNVC: 2
046129559: RNCC: 5 | RNVC: 2

17 Sep 1979

5340-12-349-7825
Retaining Strap

123497825
T290M2202261: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-349-1098
Mounting Plate

123491098
800005001: RNCC: 3 | RNVC: 2
F800005001: RNCC: 5 | RNVC: 9

27 Sep 1999

5340-12-362-7348
Angle Bracket

123627348
S533M6034213: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-378-3413
Angle Bracket

123783413
5559521: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-350-7027
Spannversch Halter

123507027
10063-313320: RNCC: 3 | RNVC: 2
10063-313320: RNCC: 5 | RNVC: 9

8 May 2000

5340-12-372-7354
Retaining Bail

123727354
00003530600: RNCC: 3 | RNVC: 2

16 Aug 2007

5340-12-197-2658
Angle Bracket

121972658
10.720.04.05-21: RNCC: 2 | RNVC: 2
10.720.04.05-21: RNCC: 5 | RNVC: 2

5 Oct 1983

5340-12-194-8908
Retaining Clip

121948908
55651544275557: RNCC: 3 | RNVC: 2
781900130001: RNCC: 5 | RNVC: 9
55651544275557: RNCC: 5 | RNVC: 9
4275 557: RNCC: 5 | RNVC: 9

15 Dec 1982

5340-12-199-7064
Loop Clamp

121997064
351271302961: RNCC: 3 | RNVC: 2
35127130296: RNCC: 5 | RNVC: 2

24 May 1984

5340-12-050-1980

5340-12-094-1093

5340-12-393-5882
Mounting Bracket

123935882
1116666-8: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-321-8027
Mounting Bracket

123218027
54.3040.210.03LV: RNCC: 2 | RNVC: 2
54.3040.210.03LV: RNCC: 3 | RNVC: 2

28 Jun 1990

5340-12-302-4236
Double Angle Bracket

123024236
3878916820: RNCC: 3 | RNVC: 2

28 Dec 1984

5340-12-344-2382
Metallic Bumper

123442382
2500255-531510.001.0: RNCC: 2 | RNVC: 2
2500255-531510.001.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-329-0358
Escutcheon Plate

123290358
6645WCO/WCR: RNCC: 3 | RNVC: 2

11 Jul 1992

5340-12-320-8778
Dust And Moisture Seal Protective Plug

123208778
590157: RNCC: 3 | RNVC: 2
86489: RNCC: 5 | RNVC: 2

1 Mar 1990

5340-12-341-9771
Angle Bracket

123419771
0224 6978: RNCC: 3 | RNVC: 2
02246978ED0142-29: RNCC: 5 | RNVC: 9

22 Nov 1996

5340-12-367-4024
Angle Bracket

123674024
943385939: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-12-021-3800

5340-12-043-2646

5340-12-387-0267
Block Clamp

123870267
58080177: RNCC: 3 | RNVC: 2
CV190749: RNCC: 5 | RNVC: 2
58080177: RNCC: 5 | RNVC: 2

27 Oct 2011

5340-12-309-2745
Strap Hinge

123092745
4617200437: RNCC: 3 | RNVC: 2

9 Jan 1987

5340-12-313-3780
Hand Crank

123133780
2300248-90900.00: RNCC: 2 | RNVC: 2
2300248-90900.00: RNCC: 3 | RNVC: 2
2300248-90900.00: RNCC: 5 | RNVC: 2

26 Mar 1988

5340-12-306-6148
Recess Handle

123066148
84239: RNCC: 3 | RNVC: 2
030305: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-368-6536
Swivel Caster

123686536
L-P 261R-ST: RNCC: 3 | RNVC: 2

4 Apr 2006

5340-12-182-4977
Loop Clamp

121824977
900729-4: RNCC: 3 | RNVC: 2

6 Feb 1980

5340-12-334-4910
Spacing Threaded Standoff

123344910
1676674500: RNCC: 3 | RNVC: 2
16766745: RNCC: 5 | RNVC: 2

16 May 1994

5340-12-330-1507
Angle Bracket

123301507
A4.2440: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-12-143-4684

5340-12-183-6048
Helical Compression Spring Retainer

121836048
6011 317 001: RNCC: 3 | RNVC: 2
1092977: RNCC: 5 | RNVC: 2
8454072: RNCC: 5 | RNVC: 2
6011317001: RNCC: 5 | RNVC: 9

3 May 1980

5340-12-378-1170
Spring Tension Clip

123781170
8909990239: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-162-4524
Spring Tension Clip

121624524
2241428701: RNCC: 3 | RNVC: 2
22414 28701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-5464
Mounting Bracket

123585464
5410100140: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-092-0909

5340-12-186-1508
Manual Control Handle

121861508
PAN5103: RNCC: 3 | RNVC: 2

2 Dec 1980

5340-12-136-3207
Plain Solid Disk

121363207
114F35008: RNCC: 3 | RNVC: 2
8391810452: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-9317
Support Hook

121859317
5315996: RNCC: 3 | RNVC: 2

11 Nov 1980

5340-12-363-9132
Mounting Plate

123639132
1267661519: RNCC: 3 | RNVC: 2
1407661019: RNCC: 5 | RNVC: 9

4 Aug 2004

5340-12-378-9618
Access Cover

123789618
11230211100: RNCC: 3 | RNVC: 2

4 Jun 2009

5340-12-320-2111
Angle Bracket

123202111
0241 0412: RNCC: 3 | RNVC: 2
02410412EE0147-17: RNCC: 5 | RNVC: 2

19 Dec 1989

5340-12-320-0723
Access Door

123200723
100013005: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-300-6697
Double Angle Bracket

123006697
4355222240: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-366-9713
Mounting Bracket

123669713
S252M3131101: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-316-2905
Rod End Clevis

123162905
6387946: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-316-4172
Helical Compression Spring Retainer

123164172
6378706: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-388-5401
Expansion Shield

123885401
50557: RNCC: 3 | RNVC: 2
SLM 20: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-12-316-9827
Dust And Moisture Seal Protective Cap

123169827
20784: RNCC: 3 | RNVC: 2
M27A: RNCC: 5 | RNVC: 2

1 Mar 1989

5340-12-324-7664
Nonmetallic Bumper

123247664
2500171-452000.03: RNCC: 2 | RNVC: 2
2500171-452000.03: RNCC: 3 | RNVC: 2
2500171-452000.03: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-360-0439
Mounting Bracket

123600439
9416110114: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-332-5864
Handwheel

123325864
M13053: RNCC: 3 | RNVC: 2
M13053: RNCC: 5 | RNVC: 9

25 Aug 1993

5340-12-357-6318
Access Cover

123576318
028145111: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-366-6871
Mounting Bracket

123666871
181004348: RNCC: 3 | RNVC: 2

24 May 2005

5340-12-368-2616
Mounting Bracket

123682616
85417200014: RNCC: 3 | RNVC: 2
85.41720-0014: RNCC: 5 | RNVC: 2

18 Jan 2006

5340-12-380-2368
Access Cover

123802368
4100038-181153.000.0: RNCC: 2 | RNVC: 2
4100038-181153.000.0: RNCC: 3 | RNVC: 2

8 Oct 2009

5340-12-701-6888
Mounting Plate

127016888
VG95211-ML-127016888: RNCC: 2 | RNVC: 2
5.12.7220.2330.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-333-2010
Retaining Strap

123332010
00098348100: RNCC: 3 | RNVC: 9
328-1801117.000: RNCC: 5 | RNVC: 9
9834810: RNCC: 5 | RNVC: 9

9 Nov 1993

5340-12-339-8236
Mending Plate

123398236
857 446-00: RNCC: 3 | RNVC: 2
857446-00: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-12-191-0010
Resilient Mount

121910010
1204090000: RNCC: 3 | RNVC: 2
UMA,568/969,U3: RNCC: 5 | RNVC: 2
UMA,INDEX568/969: RNCC: 5 | RNVC: 9
U3: RNCC: 5 | RNVC: 9

5 Jan 1982

5340-12-339-7315
Butt Hinge Leaf

123397315
2300218-103300.03: RNCC: 2 | RNVC: 2
2300218-103300.03: RNCC: 3 | RNVC: 2

5 Jan 1996

5340-12-301-4182
Nonmetallic Bumper

123014182
4900059-132105.002.0: RNCC: 2 | RNVC: 2
4900059-132105.002.0: RNCC: 3 | RNVC: 2
1228801: RNCC: 5 | RNVC: 2

12 Oct 1984

5340-12-151-6991
Pipe Bracket

121516991
160-71015-21: RNCC: 3 | RNVC: 2
160-71015-21: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-185-3983
Angle Bracket

121853983
555-00-000000041: RNCC: 3 | RNVC: 2

3 Oct 1980

5340-12-158-6394
Spring Tension Clip

121586394
450-0104: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-387-3885
Mounting Plate

123873885
80996066107: RNCC: 3 | RNVC: 2
80.99606-6107: RNCC: 5 | RNVC: 2

7 Dec 2011

5340-12-300-9188
Helical Compression Spring Retainer

123009188
3904-223.57(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-367-3969
Escutcheon Plate

123673969
NO PRIMARY REF 12-367-3969: RNCC: 3 | RNVC: 2
7069411: RNCC: 5 | RNVC: 2

15 Aug 2005

5340-12-385-8448
Access Cover

123858448
XP51220200018: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-12-346-1533
Dust And Moisture Seal Protective Cap

123461533
7103468: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-344-9968
Angle Bracket

123449968
160-24180-65: RNCC: 3 | RNVC: 2
160-24180-65: RNCC: 5 | RNVC: 9

20 Jan 1998

5340-12-363-9342
Angle Bracket

123639342
0419 0690: RNCC: 3 | RNVC: 2

5 Aug 2004

5340-12-340-0806
Buckle

123400806
P20570: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-198-4109
Angle Bracket

121984109
5802017-603005.00: RNCC: 3 | RNVC: 2

25 Jan 1984

5340-12-350-5587
Headless Straight Rod

123505587
10063-213100.02: RNCC: 3 | RNVC: 2
10063-213100.02: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-196-2041
Retaining Clip

121962041
1820022000: RNCC: 3 | RNVC: 2
0002520829: RNCC: 5 | RNVC: 2

13 Jun 1983

5340-12-374-0443
Nonmetallic Bumper

123740443
233235: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-12-307-2211
Nonmetallic Bumper

123072211
6064402: RNCC: 3 | RNVC: 2

22 May 1986

5340-12-024-2023

5340-12-041-6771

5340-12-366-7349
Mounting Bracket

123667349
187404310: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-337-1386
Mending Plate

123371386
52.1850.500.10: RNCC: 3 | RNVC: 2
52.1850.500.10: RNCC: 5 | RNVC: 9

24 Jan 1995

5340-12-024-2024

5340-12-025-0197

5340-12-388-0663
Mounting Plate

123880663
2012814006: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-12-195-1419
Retaining Strap

121951419
1437011: RNCC: 3 | RNVC: 2
7903 TYPII: RNCC: 5 | RNVC: 2

17 Jan 1983

5340-12-378-4291
Door Handle

123784291
65000311: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-332-8409
Mending Plate

123328409
81429025185: RNCC: 2 | RNVC: 2
81429025185: RNCC: 3 | RNVC: 2
81.42902.5185: RNCC: 5 | RNVC: 2

24 Sep 1993

5340-12-387-5696
Mounting Bracket

123875696
BD9102E787: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-368-1429
Clamping Catch

123681429
341-R: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-346-4059
Shock Mount Pad

123464059
251863821H: RNCC: 3 | RNVC: 2

21 Jul 1998

5340-12-307-7038
Angle Bracket

123077038
RP988841: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-314-5965
Resilient Mount

123145965
2K22BAM25G1: RNCC: 3 | RNVC: 2
3319.51946: RNCC: 5 | RNVC: 2
2K22BAM25G1: RNCC: 5 | RNVC: 9

21 Jul 1988

5340-12-180-4691
Mounting Bracket

121804691
3816220414: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-308-7496
Container Adapter

123087496
6900109-991800002: RNCC: 2 | RNVC: 2

13 Nov 1986

5340-12-315-7240
Angle Bracket

123157240
4256240011: RNCC: 3 | RNVC: 2
425 624 00 11: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-179-7592
Angle Bracket

121797592
81429400106: RNCC: 3 | RNVC: 2
81.42940.0106: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-025-0583

5340-12-353-1804
Loop Clamp

123531804
L157110: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-044-2910

5340-12-358-6288
Multiple Angle Bracket

123586288
EZ155207: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-195-5749
Dust And Moisture Seal Protective Cap

121955749
4069870345: RNCC: 3 | RNVC: 2

14 Mar 1983

5340-12-309-4664
Flare Lock Fastener

123094664
15054: RNCC: 3 | RNVC: 2
0059888278: RNCC: 5 | RNVC: 2

27 Jan 1987

5340-12-190-4816
Electrical-Mechanical Equipment Post

121904816
CF 429 334: RNCC: 3 | RNVC: 2
CF429334: RNCC: 5 | RNVC: 2
CF 429 334: RNCC: 5 | RNVC: 2
CF429334: RNCC: 5 | RNVC: 2

1 Dec 1981

5340-12-180-4688
Nonmetallic Bumper

121804688
1239870940: RNCC: 3 | RNVC: 2
1149870039: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-199-3303
Spring Tension Clip

121993303
11994: RNCC: 3 | RNVC: 2
15622021: RNCC: 5 | RNVC: 2
15622021: RNCC: 5 | RNVC: 2
0019889878: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-12-328-9200
Retaining Strap

123289200
105-617071.50: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-378-4434
Angle Bracket

123784434
41229121: RNCC: 3 | RNVC: 2

7 Apr 2009

5340-12-351-8498
Angle Bracket

123518498
5400051-773213.00: RNCC: 2 | RNVC: 2
5400051-773213.00: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-12-320-1430
Rigid Caster

123201430
349883: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-12-390-9952
Spring Tension Clip

123909952
094910: RNCC: 3 | RNVC: 2

14 Jan 2013

5340-12-179-1511
Angle Bracket

121791511
CF437717: RNCC: 3 | RNVC: 2
CF437717: RNCC: 5 | RNVC: 2
CF437717: RNCC: 5 | RNVC: 2
CF 437 717: RNCC: 5 | RNVC: 2
CF 437 717: RNCC: 5 | RNVC: 2
CF 437 717: RNCC: 5 | RNVC: 2

11 Jun 1979

5340-12-131-2965

5340-12-192-7110
Lock-Release Lever

121927110
01TC34223: RNCC: 3 | RNVC: 2

17 May 1982

5340-12-176-1948
Loop Clamp

121761948
PAN4231F2424: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-182-6309
Access Cover

121826309
0287 7494: RNCC: 3 | RNVC: 2
2877494KZ0704-78: RNCC: 5 | RNVC: 2
2877494: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-12-331-2733
Butt Hinge Leaf

123312733
LN9172KF915: RNCC: 2 | RNVC: 2
105-22301.20: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-12-189-7616
Lock-Release Lever

121897616
01A109BBAH10A: RNCC: 3 | RNVC: 2
K2601A109BBAH10A: RNCC: 5 | RNVC: 2
K2601A109BBAH10A: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-198-3013
Clamping Catch

121983013
27 0322 313: RNCC: 2 | RNVC: 2
9837754: RNCC: 3 | RNVC: 2
9837754: RNCC: 5 | RNVC: 9

13 Jan 1984

5340-12-311-1170
Shimmy Damper

123111170
1000025-120000.29: RNCC: 2 | RNVC: 2
1000025-120000.29: RNCC: 3 | RNVC: 2
1000025-120000.29: RNCC: 5 | RNVC: 9

28 Jul 1987

5340-12-352-3304
Retaining Strap

123523304
856294: RNCC: 3 | RNVC: 9

8 Nov 2000

5340-12-350-7030
Spring Loaded Cylinder Fastener

123507030
10063-546000: RNCC: 3 | RNVC: 2
10063-546000: RNCC: 5 | RNVC: 9

8 May 2000

5340-12-319-4604
Rod End Clevis

123194604
392062: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-321-9171
Webbing Strap

123219171
9000 1109: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-187-4880
Retaining Strap

121874880
BK5056/4: RNCC: 3 | RNVC: 2
BK5056/4: RNCC: 5 | RNVC: 9
BK5056/4: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-355-4837
Webbing Strap

123554837
9193.964.4: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-311-8350
Rod End Clevis

123118350
BS415.3.1-U: RNCC: 3 | RNVC: 2
BS415-3-1: RNCC: 5 | RNVC: 2

21 Oct 1987

5340-12-309-8037
Angle Bracket

123098037
5110800040: RNCC: 3 | RNVC: 2

4 Mar 1987

5340-12-185-0490
Clamping Catch

121850490
420: RNCC: 3 | RNVC: 2

6 Sep 1980

5340-12-161-0051
Nut And Bolt Locking Plate

121610051
100355-003700.03: RNCC: 2 | RNVC: 2
100355-003700.03: RNCC: 3 | RNVC: 2
100355-003700-03: RNCC: 5 | RNVC: 9
100355-003700.03: RNCC: 5 | RNVC: 9
100355-003700-03: RNCC: 5 | RNVC: 9
100355-003700.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-346-9935
Dust And Moisture Seal Protective Cap

123469935
691032: RNCC: 3 | RNVC: 2
0509/024: RNCC: 5 | RNVC: 2
2.90.010267: RNCC: 5 | RNVC: 2

8 Oct 1998

5340-12-194-0169
Resilient Mount

121940169
155011-6,6-HD.1.4305-69: RNCC: 3 | RNVC: 2
5220 HDS V2A: RNCC: 5 | RNVC: 2
TX3054/04/2: RNCC: 5 | RNVC: 2
60-52-20 HD-1.4305: RNCC: 5 | RNVC: 2
TX3054/04/02: RNCC: 5 | RNVC: 2
5220 HDS V2A: RNCC: 5 | RNVC: 9
VG95406-G4-8-Q-H-NMST: RNCC: 5 | RNVC: 9
5220 HDS A: RNCC: 5 | RNVC: 9
5220 S HDS: RNCC: 5 | RNVC: 9
5220HDS-1.4305: RNCC: 5 | RNVC: 9

23 Sep 1982

5340-12-171-5157
Mending Plate

121715157
81264120003: RNCC: 3 | RNVC: 2
81.26412-0003: RNCC: 5 | RNVC: 2
195536: RNCC: 5 | RNVC: 2

20 Oct 1977

5340-12-370-5520
Compression Cup

123705520
4312000035: RNCC: 3 | RNVC: 2
2178-04-00-01/27: RNCC: 5 | RNVC: 2
303345: RNCC: 5 | RNVC: 2

21 Nov 2006

5340-12-309-3525
Angle Bracket

123093525
5800043-1610.00: RNCC: 2 | RNVC: 2
5800043-1610.00: RNCC: 3 | RNVC: 2

19 Jan 1987

5340-12-146-8717
Loop Clamp

121468717
14C: RNCC: 3 | RNVC: 2
25704-350000T182: RNCC: 5 | RNVC: 2
5800583-096190-125: RNCC: 5 | RNVC: 2
5800583-096190.125: RNCC: 5 | RNVC: 2
211-15140: RNCC: 5 | RNVC: 2
202011901: RNCC: 5 | RNVC: 9
25704-350000T182: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-142-2452
Spring Tension Clip

121422452
C20326-A86-C172: RNCC: 3 | RNVC: 2
C20326A86C172: RNCC: 5 | RNVC: 2
TSEND86T172: RNCC: 5 | RNVC: 9
TFS72-83172: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-136-7646
Door Button

121367646
2768-040: RNCC: 3 | RNVC: 2
2768040: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-4382
Manual Control Handle

121894382
009-078.195-000: RNCC: 3 | RNVC: 2
009-078-195: RNCC: 5 | RNVC: 2
009-078.195: RNCC: 5 | RNVC: 2
009-078.195: RNCC: 5 | RNVC: 9
009-078-195: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-12-165-4419
Dust And Moisture Seal Protective Cap-Plug

121654419
610U16: RNCC: 3 | RNVC: 2
GPN610U16: RNCC: 5 | RNVC: 2
002346-0016: RNCC: 5 | RNVC: 2
GPN610U16: RNCC: 5 | RNVC: 2
909734182: RNCC: 5 | RNVC: 2
610001600: RNCC: 5 | RNVC: 9
U16GPN610: RNCC: 5 | RNVC: 9
U16: RNCC: 5 | RNVC: 9
GPN610,U16: RNCC: 5 | RNVC: 9
GPN610-U16: RNCC: 5 | RNVC: 9

4 May 1976

5340-12-351-0720
Spring Tension Clip

123510720
81045109: RNCC: 3 | RNVC: 2
81-045-109: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-12-183-8084
Hand Carrying Strap Assembly

121838084
5801441-31170: RNCC: 2 | RNVC: 2
5801441-31170: RNCC: 3 | RNVC: 2
5801441-31170: RNCC: 5 | RNVC: 9

23 May 1980

5340-12-366-7918
Door Button

123667918
2300421-183200.040: RNCC: 2 | RNVC: 2
2300421-183200.040: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-12-306-8054
Ball Socket Seat

123068054
DIN71805-B10-B3P: RNCC: 2 | RNVC: 2
DIN71805-B10-B3P: RNCC: 3 | RNVC: 2
01103021: RNCC: 5 | RNVC: 2

3 Apr 1986

5340-12-197-8181
Dust And Moisture Seal Protective Plug

121978181
5801439-32.001: RNCC: 3 | RNVC: 2
5801439-32.001: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-179-2325
Platte

121792325
5800828-1331-002: RNCC: 3 | RNVC: 2
5800828-1331.002: RNCC: 5 | RNVC: 2

18 Jun 1979

5340-12-361-0764
Access Cover

123610764
S433M1002210: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-316-7950
Mounting Bracket

123167950
2300279-3638.00: RNCC: 2 | RNVC: 2
2300279-3638.00: RNCC: 3 | RNVC: 2
2300279-3638.00: RNCC: 5 | RNVC: 9
9866235: RNCC: 5 | RNVC: 9

14 Feb 1989

5340-12-043-3563

5340-12-091-7025

5340-12-384-8054
Access Cover

123848054
31.02.03.013H: RNCC: 3 | RNVC: 2
678.03.006.000: RNCC: 5 | RNVC: 2

30 Mar 2011

5340-12-359-8128
Shimmy Damper

123598128
094358: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-026-3562

5340-12-391-4075
Rod End Clevis

123914075
1103620: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-12-381-8383
Mounting Plate

123818383
000605-215000.01: RNCC: 2 | RNVC: 2
000605-215000.01: RNCC: 3 | RNVC: 2
39303: RNCC: 5 | RNVC: 2

8 Apr 2010

5340-12-388-4472
Mounting Plate

123884472
5842371540: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-091-2531

5340-12-343-0914
Spring Tension Clip

123430914
1772 2274: RNCC: 3 | RNVC: 2
17722274: RNCC: 5 | RNVC: 2
77222: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-343-8046
Retaining Strap

123438046
32702000: RNCC: 3 | RNVC: 9
7005036: RNCC: 5 | RNVC: 2
0059970690: RNCC: 5 | RNVC: 2

30 Jul 1997

5340-12-310-1282
Bridge Clamp

123101282
00009620023: RNCC: 3 | RNVC: 2

9 Apr 1987

5340-12-314-0194
Clamping Catch

123140194
351271101940: RNCC: 3 | RNVC: 2

31 May 1988

5340-12-307-7029
Mending Plate

123077029
RP981719: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-187-7176
Bow Handle

121877176
2201251001: RNCC: 3 | RNVC: 2
22012 51001: RNCC: 5 | RNVC: 9

29 Apr 1981

5340-12-393-2721
Dust And Moisture Seal Protective Plug

123932721
600B1140RAL3000: RNCC: 3 | RNVC: 2
GPN600B1140RAL3000: RNCC: 3 | RNVC: 9
9560159360: RNCC: 5 | RNVC: 2
600B1140RAL3000: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-12-308-6286
Electrical-Mechanical Equipment Post

123086286
351271266761: RNCC: 3 | RNVC: 2

30 Oct 1986

5340-12-370-0534
Flush Lock

123700534
308.308: RNCC: 3 | RNVC: 2
11.395: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-12-369-4339
Mounting Bracket

123694339
5832300740: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-12-311-7482
Catch Strike

123117482
2300074-4156.02: RNCC: 2 | RNVC: 2
2300074-4156.02: RNCC: 3 | RNVC: 2
9803547: RNCC: 3 | RNVC: 2
2300074-4156.02: RNCC: 5 | RNVC: 9
9803547: RNCC: 5 | RNVC: 9

14 Oct 1987

5340-12-354-4481
Mounting Plate

123544481
1150000734: RNCC: 3 | RNVC: 2
SPAS 4S: RNCC: 5 | RNVC: 9

12 Jul 2001

5340-12-094-6060

5340-12-190-4519
Folding Stay

121904519
81613350005: RNCC: 3 | RNVC: 2
81.61335.0005: RNCC: 5 | RNVC: 2

26 Nov 1981

5340-12-357-2586
Dust And Moisture Seal Protective Cover

123572586
0005454930: RNCC: 3 | RNVC: 2

27 May 2002

5340-12-320-2589
Eye Hook

123202589
251803659B: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-12-319-6352
Dust And Moisture Seal Protective Plug

123196352
4325000404: RNCC: 3 | RNVC: 2

19 Oct 1989

5340-12-349-8832
Angle Bracket

123498832
54.1038.035.40: RNCC: 2 | RNVC: 2
54.1038.035.40: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-094-4368

5340-12-330-9995
Mending Plate

123309995
2782-363000.012.0: RNCC: 2 | RNVC: 2
2782-363000.012.0: RNCC: 3 | RNVC: 2

9 Mar 1993

5340-12-308-8269
Access Cover

123088269
2500179-350700.006.0: RNCC: 2 | RNVC: 2
2500179-350700.006.0: RNCC: 3 | RNVC: 2

20 Nov 1986

5340-12-307-9960
Lock-Release Lever

123079960
0061.1860.9: RNCC: 3 | RNVC: 2

18 Aug 1986

5340-12-177-2817
Platte

121772817
1-1-4074: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-317-6524
Retaining Strap

123176524
R99103C: RNCC: 3 | RNVC: 2
068 130 421 A: RNCC: 5 | RNVC: 2
068130421A: RNCC: 5 | RNVC: 2
068 130 421 A: RNCC: 5 | RNVC: 2
068 130 421 A: RNCC: 5 | RNVC: 2

26 Apr 1989

5340-12-381-7860
Mounting Plate

123817860
4100037-980690.002.0: RNCC: 2 | RNVC: 2
4100037-980690.002.0: RNCC: 3 | RNVC: 2
4100037-980690.002.0: RNCC: 5 | RNVC: 9

31 Mar 2010

5340-12-357-8894
Mending Plate

123578894
12227301: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-338-2297
Nonmetallic Bumper

123382297
3972001: RNCC: 3 | RNVC: 2

8 Jun 1995

5340-12-392-0045
Mounting Plate

123920045
I006519TAN686A: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-320-7128
Mending Plate

123207128
9000 2397: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-328-7192
Lock-Release Lever

123287192
90.112.01.706: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-12-323-8292
Mounting Plate

123238292
0289 6519: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-186-6790
Expansion Plug

121866790
3273320029: RNCC: 3 | RNVC: 2

26 Jan 1981

5340-12-389-4560
Mounting Bracket

123894560
X00024714: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-310-9751
Double Angle Bracket

123109751
03827300: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-178-8181
Nonmetallic Bumper

121788181
837 078 1438: RNCC: 2 | RNVC: 2
8370781438: RNCC: 3 | RNVC: 2

18 May 1979

5340-12-195-0798
Swivel Caster

121950798
307.601-60261.00: RNCC: 3 | RNVC: 2
2.307.601-60261: RNCC: 5 | RNVC: 9
2307601-60261-00: RNCC: 5 | RNVC: 9

11 Jan 1983

5340-12-315-9513
Dust And Moisture Seal Protective Cap

123159513
250/14: RNCC: 3 | RNVC: 2
GPN250/14: RNCC: 5 | RNVC: 2
250001400: RNCC: 5 | RNVC: 9

9 Dec 1988

5340-12-362-3164
Mounting Bracket

123623164
2447-105: RNCC: 3 | RNVC: 2
2447-105: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-12-326-9723
Rod End Connector

123269723
279.824 086: RNCC: 3 | RNVC: 2
1392152-350038.207: RNCC: 5 | RNVC: 9
279.824 086: RNCC: 5 | RNVC: 9

14 Nov 1991

5340-12-156-0758
Rod End Clevis

121560758
30-5160-005: RNCC: 3 | RNVC: 2
303-100-0086-055: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-7777
Access Cover

123477777
C107-A104-C190: RNCC: 2 | RNVC: 2
C107-A104-C190: RNCC: 3 | RNVC: 2
C107A104C190: RNCC: 5 | RNVC: 2

9 Feb 1999

5340-12-153-4636
Klemme

121534636
C42105-A25-B11: RNCC: 3 | RNVC: 2
C42105A25B11: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-180-6346
Catch Strike

121806346
C119-A31-C426: RNCC: 2 | RNVC: 2
C119A31C426: RNCC: 3 | RNVC: 2
C119A31C426: RNCC: 5 | RNVC: 2
C119-A31-C426: RNCC: 5 | RNVC: 2
C119-A31-C426: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-381-6164
Cushioning Pad

123816164
D0124758-001: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-12-313-8236
Mounting Bracket

123138236
5803471-201380.00: RNCC: 2 | RNVC: 2
5803471-201380.00: RNCC: 3 | RNVC: 2
65.7789.437.00-A001: RNCC: 3 | RNVC: 2
5803471-201380.00: RNCC: 5 | RNVC: 2
65.7789.437.00: RNCC: 5 | RNVC: 2

10 May 1988

5340-12-701-8495
Loop Clamp

127018495
VG95211-ML-127018495: RNCC: 2 | RNVC: 2
5191A-40: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-394-4966
Mounting Bracket

123944966
L717M2014201: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-302-1370
Nonmetallic Bumper

123021370
4178856: RNCC: 3 | RNVC: 2
S12B.F01.07.00.007: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-198-7547
Pipe Hanger

121987547
51.6816.067.00: RNCC: 3 | RNVC: 2

23 Feb 1984

5340-12-304-1273
Bail Handle

123041273
17462.0M32: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-311-8434
Access Cover

123118434
2300074-3007.00: RNCC: 2 | RNVC: 2
2300074-3007.00: RNCC: 3 | RNVC: 2
2300074-3007.00: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-374-0295
Hand Crank

123740295
288/A3050: RNCC: 3 | RNVC: 2

11 Jan 2008

5340-12-301-8433
Nonmetallic Bumper

123018433
3638910717: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-12-316-5873
Mounting Bracket

123165873
2500121-442000.00: RNCC: 2 | RNVC: 2
2500121-442000.00: RNCC: 3 | RNVC: 2
2500121-442000.00: RNCC: 5 | RNVC: 9

26 Jan 1989

5340-12-349-0129
Bow Handle

123490129
4258150636: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-12-181-0980
Dust And Moisture Seal Protective Plug

121810980
300F142RAL1016: RNCC: 3 | RNVC: 2
F142GELB: RNCC: 5 | RNVC: 9
300014200GELB: RNCC: 5 | RNVC: 9
300014210: RNCC: 5 | RNVC: 9
300F142 GELB: RNCC: 5 | RNVC: 9
F142GPN300GELB: RNCC: 5 | RNVC: 9
GPN300,F142,GELB: RNCC: 5 | RNVC: 9
GPN300F142GELB: RNCC: 5 | RNVC: 9

24 Oct 1979

5340-12-379-4728
Nonmetallic Solid Wheel

123794728
614,002,0341: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-12-360-2987
Loop Clamp

123602987
0009502218: RNCC: 3 | RNVC: 2
0009502218: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-305-6105
Spring Tension Clip

123056105
501908: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-356-7674
Dust And Moisture Seal Protective Plug

123567674
6419970186: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-174-7938
Sliding Stay

121747938
DM450: RNCC: 3 | RNVC: 9
DM450: RNCC: 5 | RNVC: 2
DM450: RNCC: 5 | RNVC: 9

3 Aug 1978

5340-12-190-8751
Helical Compression Spring Seat

121908751
2410320052: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-357-0076
Mounting Bracket

123570076
8812370047: RNCC: 2 | RNVC: 2
8812370047: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-144-8566
Clamp Bolt Assembly

121448566
AHAN16409: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-131-5596

5340-12-361-7314
Angle Bracket

123617314
T622M1003221: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-12-386-5648
Mounting Bracket

123865648
5347-561015B00C: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-382-8342
Spacing Threaded Standoff

123828342
10113-910000.007.0: RNCC: 2 | RNVC: 2
10113-910000.007.0: RNCC: 3 | RNVC: 2

13 Aug 2010

5340-12-337-0112
Case Corner

123370112
0.021.046.2: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-12-305-5968
Double Angle Bracket

123055968
4064202886: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-196-3965
Shimmy Damper

121963965
P-855045-401: RNCC: 3 | RNVC: 2
P855045-401: RNCC: 5 | RNVC: 2

4 Jul 1983

5340-12-194-3738
Angle Bracket

121943738
66.3505.326.00-A001: RNCC: 3 | RNVC: 2
599256: RNCC: 5 | RNVC: 2
66-3505-326-00A001: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-149-9099
Resilient Mount

121499099
DIN95369-A1-1-CR-ST: RNCC: 2 | RNVC: 2
151001-M6-CR.ST-40: RNCC: 5 | RNVC: 2
262289011004: RNCC: 5 | RNVC: 2
6374149: RNCC: 5 | RNVC: 2
VBE424-10: RNCC: 5 | RNVC: 2
60-100-040: RNCC: 5 | RNVC: 2
332052182: RNCC: 5 | RNVC: 2
C1010: RNCC: 5 | RNVC: 2
352250016912: RNCC: 5 | RNVC: 2
VG95369-A1-1-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-4623
Angle Bracket

123174623
3787186EE3138-99: RNCC: 3 | RNVC: 2
151-230000-901-0: RNCC: 5 | RNVC: 2
151-230000-901-0: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-702-2184
Mounting Bracket

127022184
VG95211-ML-127022184: RNCC: 2 | RNVC: 2
30.7225.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-9900
Angle Bracket

127019900
VG95211-ML-127019900: RNCC: 2 | RNVC: 2
155N1377-9: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6653
Blank Panel

127016653
VG95211-ML-127016653: RNCC: 2 | RNVC: 2
5.12.7210.3890.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3916
Loop Clamp

127013916
VG95211-ML-127013916: RNCC: 2 | RNVC: 2
5.12.5311.1000.34: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-199-3081
Nonmetallic Bumper

121993081
1000042-133100.07: RNCC: 3 | RNVC: 2
1000042-133100-07: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-330-8743
Nonmetallic Bumper

123308743
275.1964: RNCC: 3 | RNVC: 2
275-1964: RNCC: 5 | RNVC: 2
275.1958: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-12-159-7982
Bow Handle

121597982
ZBB11330M64: RNCC: 3 | RNVC: 2
KF0155484: RNCC: 5 | RNVC: 2
KF015-5484: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-1881
Detent Plunger

123541881
03760100: RNCC: 3 | RNVC: 2

18 Jun 2001

5340-12-374-7205
Angle Bracket

123747205
4615240110: RNCC: 3 | RNVC: 2
4615240110: RNCC: 5 | RNVC: 2

11 Mar 2008

5340-12-316-1541
Nonmetallic Bumper

123161541
3819870139: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-391-6423
Loop Clamp

123916423
0302901: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-12-332-0438
Angle Bracket

123320438
160-22308-36: RNCC: 3 | RNVC: 2
160-22308-36: RNCC: 5 | RNVC: 9

19 Jul 1993

5340-12-364-6679
Helical Compression Spring Seat

123646679
2D0407183: RNCC: 3 | RNVC: 2
9013230085: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-12-366-0516
Spring Tension Clip

123660516
0009946148: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-169-0173
Leather Strap

121690173
WW 310 244 C: RNCC: 2 | RNVC: 2
WW 310 244 C: RNCC: 3 | RNVC: 2
WW 310 244 C: RNCC: 5 | RNVC: 2
WW310244B: RNCC: 5 | RNVC: 2
WW310244C: RNCC: 5 | RNVC: 2
WW 310 244 B: RNCC: 5 | RNVC: 2
WW 310 244 C: RNCC: 5 | RNVC: 2
WW310244B: RNCC: 5 | RNVC: 2
WW310244C: RNCC: 5 | RNVC: 2
WW310244B: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-12-182-7381
Mounting Bracket

121827381
R1570S7: RNCC: 3 | RNVC: 2

22 Feb 1980

5340-12-183-1057
Mending Plate

121831057
03436362: RNCC: 3 | RNVC: 2
3436362EE5059-80: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-027-9074

5340-12-181-2637
Loop Clamp

121812637
DIN3016-1-D2-22-22X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-22-22X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X22/20: RNCC: 3 | RNVC: 2
0009952705: RNCC: 5 | RNVC: 2
4219220022: RNCC: 5 | RNVC: 2
RSGU1100-2X22-20: RNCC: 5 | RNVC: 2
RSGU1100.2X22/20: RNCC: 5 | RNVC: 2
DIN3016-D2-22-22X20-W1-2: RNCC: 5 | RNVC: 9

7 Nov 1979

5340-12-199-3133
Access Cover

121993133
2.72-8145: RNCC: 3 | RNVC: 2
2-72-8145: RNCC: 5 | RNVC: 2
2-72-8145: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-196-9865
Angle Bracket

121969865
A-230129-077: RNCC: 3 | RNVC: 2
A230129-077: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-303-2742
Access Hole Frame

123032742
P-886754-003: RNCC: 3 | RNVC: 2
P886754-003: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-184-1885
Clamping Catch

121841885
V951L02-1-5AF: RNCC: 3 | RNVC: 2
51L1-1-5AA: RNCC: 5 | RNVC: 2
91690877: RNCC: 5 | RNVC: 2

3 Jul 1980

5340-12-164-8247
Clamping Catch

121648247
2300LG0FNSKADMIERT: RNCC: 3 | RNVC: 2
8406004: RNCC: 5 | RNVC: 2
0646-099: RNCC: 5 | RNVC: 2
0646099: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-310-2475
Mending Plate

123102475
974-200000.07.0: RNCC: 3 | RNVC: 2
974-200000.07.0: RNCC: 5 | RNVC: 9
974-200000-07-0: RNCC: 5 | RNVC: 9

27 Apr 1987

5340-12-182-7575
Resilient Mount

121827575
DIN95363-B30X20-NR45ST-M8X13: RNCC: 2 | RNVC: 2
57810790012: RNCC: 5 | RNVC: 2
781079WEICH: RNCC: 5 | RNVC: 2
1.30.20.3.45NR/ST-M8X13: RNCC: 5 | RNVC: 2
811.010.030.020.08X13.NR45.ST: RNCC: 5 | RNVC: 2
81110-30X20-M8X13.NR45.ST: RNCC: 5 | RNVC: 2
VG95363-B30X20-M8X13-NR45ST: RNCC: 5 | RNVC: 9
VG95363-B30X20-NR45ST-M8X13: RNCC: 5 | RNVC: 9

25 Feb 1980

5340-12-318-1286
Mounting Bracket

123181286
5600023-190277.000.0: RNCC: 2 | RNVC: 2
5600023-190277.000.0: RNCC: 3 | RNVC: 2
22010.0.09.400.00: RNCC: 3 | RNVC: 2
1271867: RNCC: 5 | RNVC: 2
22010.0.09.400.00: RNCC: 5 | RNVC: 9

14 Jun 1989

5340-12-143-9858
Lock-Release Lever

121439858
1004400-1063: RNCC: 3 | RNVC: 9
1.00.4400-106.3: RNCC: 5 | RNVC: 9
109217-3600-085: RNCC: 5 | RNVC: 9
109217-3600-085: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-7834
Lock-Release Lever

123397834
87-401.10-00.00-76: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-198-5020
Retaining Strap

121985020
160-744902-12: RNCC: 3 | RNVC: 2
160-744902-12: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-307-9610
Double Angle Bracket

123079610
NO PRIMARY REF 12-307-9610: RNCC: 3 | RNVC: 2
LM-2882POS17: RNCC: 5 | RNVC: 9

14 Aug 1986

5340-12-318-8656
Mounting Bracket

123188656
42309112: RNCC: 3 | RNVC: 2
42309112UE5516-29: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-199-7137
Rod End Connector

121997137
A11A173130502A1: RNCC: 3 | RNVC: 2

24 May 1984

5340-12-372-3926
Nonmetallic Bumper

123723926
5500780638: RNCC: 3 | RNVC: 2
550 078 06 38: RNCC: 5 | RNVC: 2

12 Jul 2007

5340-12-189-0575
Dust And Moisture Seal Protective Plug

121890575
158396: RNCC: 3 | RNVC: 2
158 396: RNCC: 5 | RNVC: 2
158 396: RNCC: 5 | RNVC: 9
158396: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-179-7838
Helical Compression Spring Seat

121797838
0287 4808: RNCC: 3 | RNVC: 2
2874808: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-373-1541
Butt Hinge

123731541
3842524781: RNCC: 3 | RNVC: 2
3842535642: RNCC: 5 | RNVC: 2

4 Oct 2007

5340-12-194-6889
Ball Socket Seat

121946889
4193220790: RNCC: 3 | RNVC: 2
419 322 07 90: RNCC: 5 | RNVC: 2

25 Nov 1982

5340-12-311-9911
Retaining Strap

123119911
01TC30909: RNCC: 3 | RNVC: 2

9 Nov 1987

5340-12-391-8292
Access Cover

123918292
I006480TAN686A: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-12-339-1256
Mounting Bracket

123391256
3520723540: RNCC: 3 | RNVC: 2

12 Oct 1995

5340-12-308-6421
Flush Catch Claw

123086421
152-44818: RNCC: 3 | RNVC: 2

31 Oct 1986

5340-12-317-1984
Strap Hinge

123171984
3227200637: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-320-1349
Access Cover

123201349
0202101: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-304-3343
Dust And Moisture Seal Protective Plug

123043343
1 32 522: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-198-7175
Dust And Moisture Seal Protective Plug

121987175
915042007001: RNCC: 3 | RNVC: 2
7,5N15042SW: RNCC: 5 | RNVC: 2
7-5N15042SW: RNCC: 5 | RNVC: 2
STOPFEN7,5N15042-SW: RNCC: 5 | RNVC: 2

22 Feb 1984

5340-12-193-2019
Webbing Strap

121932019
4607920162: RNCC: 3 | RNVC: 2
721 1 77 157 1: RNCC: 5 | RNVC: 9

30 Jun 1982

5340-12-319-5057
Angle Bracket

123195057
4900059-755130.005.0: RNCC: 3 | RNVC: 2
1504310: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-322-5514
Mounting Bracket

123225514
54.0062.986.00: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-195-6427
Loop Clamp

121956427
PAN4231BG3726: RNCC: 3 | RNVC: 2

22 Mar 1983

5340-12-309-0294
Extension Drawer Slide

123090294
VS7048T024: RNCC: 3 | RNVC: 2
VS7048T024: RNCC: 5 | RNVC: 9

9 Dec 1986

5340-12-309-0788
Angle Bracket

123090788
2702064500: RNCC: 3 | RNVC: 2
27020 64500: RNCC: 5 | RNVC: 9

11 Dec 1986

5340-12-360-4772
Loop Clamp

123604772
82040412: RNCC: 3 | RNVC: 2
82040412: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-339-5467
Flush Lock

123395467
2030 1211 00: RNCC: 3 | RNVC: 2
2030 1217 35: RNCC: 5 | RNVC: 2
E509A: RNCC: 5 | RNVC: 2

4 Dec 1995

5340-12-326-3984
Mending Plate

123263984
272.345 499: RNCC: 2 | RNVC: 2
272.345.499: RNCC: 3 | RNVC: 2
272.345 499: RNCC: 5 | RNVC: 9

11 Sep 1991

5340-12-323-5963
Lock-Release Lever

123235963
2982371109: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-301-6148
Dust And Moisture Seal Protective Cap

123016148
3524620096: RNCC: 3 | RNVC: 2

26 Oct 1984

5340-12-362-8950
Angle Bracket

123628950
4044290540: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-12-356-1480
Casement Fastener

123561480
0009880764: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-194-2451
Nonmetallic Bumper

121942451
411513121: RNCC: 3 | RNVC: 2

14 Oct 1982

5340-12-363-8827
Loop Clamp

123638827
DIN3016-2-G2-48X12-W5: RNCC: 2 | RNVC: 2
SP48/12SZ-W5-2-TEILIG: RNCC: 3 | RNVC: 2
1310725048: RNCC: 5 | RNVC: 2

31 Jul 2004

5340-12-154-6763
Loop Clamp

121546763
DIN3016-1-D1-28X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-28X15-W5: RNCC: 3 | RNVC: 2
RSGU1.28/15-W5: RNCC: 3 | RNVC: 2
RSGU1100.28/15-1.4571: RNCC: 5 | RNVC: 2
9410715028: RNCC: 5 | RNVC: 2
RSGU1100-28-15-1-4571: RNCC: 5 | RNVC: 2
VG95931-D28X15-W5: RNCC: 5 | RNVC: 9
DIN3016-D1-28X15-W5: RNCC: 5 | RNVC: 9
VG95931D28X15W5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-3087
Casement Fastener

123363087
E3-99-358-35: RNCC: 3 | RNVC: 2
E3-13-35-N: RNCC: 5 | RNVC: 2
E3-99-358-35: RNCC: 5 | RNVC: 2
E3-13-35-N: RNCC: 5 | RNVC: 2

9 Nov 1994

5340-12-186-6163
Rod End Clevis

121866163
4-84974: RNCC: 3 | RNVC: 2

21 Jan 1981

5340-12-345-8775
Access Cover

123458775
6.232.0.653.002.4: RNCC: 3 | RNVC: 9
1216 1611: RNCC: 5 | RNVC: 2

11 May 1998

5340-12-318-6365
Double Angle Bracket

123186365
0223 3837: RNCC: 3 | RNVC: 2
02233837: RNCC: 5 | RNVC: 2
2233837EE0141-01: RNCC: 5 | RNVC: 2
02233837EE0141-01: RNCC: 5 | RNVC: 2

2 Aug 1989

5340-12-162-4304
Rod End Connector

121624304
5800359-010330-08: RNCC: 3 | RNVC: 2
5800359-010330-08: RNCC: 5 | RNVC: 9
5800359-010330.08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-2014
Kunst Gleitschiene

123132014
42491/0110-03: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-12-386-3357
Lock-Release Lever

123863357
009-221.293-000: RNCC: 2 | RNVC: 2
009-221.293-000: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-315-4173
Webbing Strap

123154173
AFG0176193: RNCC: 3 | RNVC: 2
124 9557: RNCC: 5 | RNVC: 2
AFG-34-15-28-01-00: RNCC: 5 | RNVC: 2

20 Oct 1988

5340-12-701-4094
Loop Clamp

127014094
VG95211-ML-127014094: RNCC: 2 | RNVC: 2
5.12.5311.8350.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-4531
Mending Plate

123094531
2500135-190000.012.0: RNCC: 2 | RNVC: 2
2500135-190000.012.0: RNCC: 3 | RNVC: 2

26 Jan 1987

5340-12-199-4302
Mending Plate

121994302
2300014-020000.24.0: RNCC: 2 | RNVC: 2
2300014-020000.24.0: RNCC: 3 | RNVC: 2
2300014-020000.24.0: RNCC: 3 | RNVC: 2
2300014-020000.24.0: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-701-4661
Loop Clamp

127014661
VG95211-ML-127014661: RNCC: 2 | RNVC: 2
5.12.5314.8190.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-329-8578
Door Button

123298578
M-APU-000000-30035-040: RNCC: 3 | RNVC: 2
M-APU-000000-30035-040: RNCC: 5 | RNVC: 9

7 Oct 1992

5340-12-701-1682
Mounting Bracket

127011682
VG95211-ML-127011682: RNCC: 2 | RNVC: 2
5.12.0237.1640.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-370-7825
Webbing Strap

123707825
01-300 02500: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-12-319-6564
Mounting Bracket

123196564
504690: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-368-4406
Furniture Glide

123684406
2259468: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-12-312-9209
Access Cover

123129209
164367: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-176-2583
Nonmetallic Bumper

121762583
181860331: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-352-2823
Blank Panel

123522823
6278001: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-12-042-4188

5340-12-350-6149
Mounting Bracket

123506149
11420401: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-12-350-8935
Mounting Plate

123508935
10063-608200.02: RNCC: 3 | RNVC: 2
10063-608200.02: RNCC: 5 | RNVC: 9

31 May 2000

5340-12-374-9619
Mounting Bracket

123749619
279.658 261: RNCC: 2 | RNVC: 2
279.658 261: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-12-385-5910
Surface Bolt

123855910
XP58408300031: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-12-094-6431

5340-12-394-0790
Dust And Moisture Seal Protective Cap

123940790
CTP40390P004: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-190-6019
Resilient Mount

121906019
02514836: RNCC: 3 | RNVC: 2
2514836EZ5045-42: RNCC: 5 | RNVC: 2
2514836: RNCC: 5 | RNVC: 2
2514836EZ5045-42: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-146-5234
Nonmetallic Bumper

121465234
3170232: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-180-0494
Resilient Mount

121800494
81962100110: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-302-2571
Mending Plate

123022571
6204901140: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-356-1451
Expansion Plug

123561451
000443018003: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-362-3928
Loop Clamp

123623928
RAP110X: RNCC: 3 | RNVC: 2
RAP110X-2 PIECE: RNCC: 5 | RNVC: 2

17 Feb 2004

5340-12-327-3767
Angle Bracket

123273767
2300223-020000.04.0: RNCC: 2 | RNVC: 2
2300223-020000.04.0: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-176-9998
Door Handle

121769998
NO PRIMARY REF 12-176-9998: RNCC: 3 | RNVC: 2
B213-250-10-8: RNCC: 5 | RNVC: 9

3 Jan 1979

5340-12-374-6361
Pipe Hanger

123746361
2 0000-050: RNCC: 3 | RNVC: 2
2 0000-050: RNCC: 5 | RNVC: 2

3 Mar 2008

5340-12-377-0301
Mounting Bracket

123770301
1030027-060016.001.0: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-12-322-9777
Angle Bracket

123229777
702-144900-902-0: RNCC: 3 | RNVC: 2

15 Oct 1990

5340-12-701-2201
Mounting Bracket

127012201
VG95211-ML-127012201: RNCC: 2 | RNVC: 2
5.12.0605.8650.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-371-5782
Multiple Angle Bracket

123715782
2300397-970158.001.0: RNCC: 3 | RNVC: 2
1809663: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-348-2904
Loop Clamp

123482904
2300298-820000.001.0: RNCC: 2 | RNVC: 2

25 May 1999

Load More Results