What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 61 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 61 of 178

5340-12-334-7826
Mounting Plate

123347826
52.0099.100.02: RNCC: 2 | RNVC: 2
52.0099.100.02: RNCC: 3 | RNVC: 2

21 Jun 1994

5340-12-190-3783
Loop Clamp

121903783
PAN4231BBCC5218: RNCC: 3 | RNVC: 2

24 Nov 1981

5340-12-318-0220
Hinge Torsion Bar

123180220
66305: RNCC: 3 | RNVC: 2
66877: RNCC: 5 | RNVC: 2
0067788: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-026-1102

5340-12-316-1339
Webbing Strap

123161339
25784-30: RNCC: 2 | RNVC: 2

24 Dec 1988

5340-12-044-4981

5340-12-352-1418
Nut And Bolt Locking Plate

123521418
8809940532: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-12-318-8655
Plug Button

123188655
04789361: RNCC: 3 | RNVC: 2
04789361EZ12-0853: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-145-9206
Retaining Strap

121459206
6188822: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-162-4734
Nonmetallic Bumper

121624734
5800359-010110-03: RNCC: 3 | RNVC: 2
5800359-010110-03: RNCC: 5 | RNVC: 9
5800359-010110.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-371-3063
Mechanic Equipment Hardware Kit

123713063
8390-0010: RNCC: 2 | RNVC: 2
8390-0010: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-393-0394
Dust And Moisture Seal Protective Cover

123930394
800367: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-020-5560

5340-12-393-5878
Plug Button

123935878
1758731: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-365-9291
Mounting Bracket

123659291
9424290669: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-180-4448
Loop Clamp

121804448
LN9490B9: RNCC: 2 | RNVC: 2

12 Sep 1979

5340-12-386-1510
Extension Drawer Slide

123861510
2500261-850320.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-166-6079
Helical Compression Spring Retainer

121666079
WW415998B: RNCC: 3 | RNVC: 9
WW 415 998 B: RNCC: 5 | RNVC: 2
WW415998B: RNCC: 5 | RNVC: 2
WW 415 998 B: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-314-8576
Spring Tension Clip

123148576
2360-261116.03.0: RNCC: 2 | RNVC: 2
2360-261116.03.0: RNCC: 3 | RNVC: 2
2360-261116.03.0: RNCC: 5 | RNVC: 2

19 Aug 1988

5340-12-149-0912
Double Angle Bracket

121490912
121G10009: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-2866
Lock-Release Lever

123222866
323585: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-12-342-1582
Double Angle Bracket

123421582
536L02035: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-135-7273

5340-12-357-8911
Mounting Bracket

123578911
2300042-255290.004: RNCC: 2 | RNVC: 2
2300042-255290.004: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-359-7388
Access Cover

123597388
272.495.642: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-328-6750
Retaining Strap

123286750
281611767: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-315-7239
Angle Bracket

123157239
4256240111: RNCC: 3 | RNVC: 2
425 624 01 11: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-306-9550
Extension Drawer Slide

123069550
GM401457: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-12-357-8280
Mounting Bracket

123578280
2300042-255811.000: RNCC: 2 | RNVC: 2
9940416: RNCC: 3 | RNVC: 2
2300042-255811.000: RNCC: 5 | RNVC: 2

30 Jul 2002

5340-12-345-8122
Access Cover

123458122
TA3014P005: RNCC: 3 | RNVC: 2

29 Apr 1998

5340-12-380-6632
Clamping Catch

123806632
81669150014: RNCC: 3 | RNVC: 2
81.66915.0014: RNCC: 5 | RNVC: 2

17 Nov 2009

5340-12-011-5325

5340-12-150-6408

5340-12-702-1796
Mounting Bracket

127021796
VG95211-ML-127021796: RNCC: 2 | RNVC: 2
30.7204.1080: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-9877
Mounting Bracket

123839877
V6560-06879-101: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-12-377-8456
Spacing Threaded Standoff

123778456
VG95148-B7XM4X45-CW614N-E2A: RNCC: 2 | RNVC: 2

16 Feb 2009

5340-12-374-6416
Mending Plate

123746416
453 6455-001: RNCC: 3 | RNVC: 2
453 6455-001: RNCC: 5 | RNVC: 2

4 Mar 2008

5340-12-158-9687
Electrical-Mechanical Equipment Post

121589687
934-01-64-03: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-186-4364
Halter

121864364
100L55-7121-011-00-09: RNCC: 2 | RNVC: 2
100L55-7121-011-00-09: RNCC: 5 | RNVC: 2

30 Dec 1980

5340-12-187-6091
Loop Clamp

121876091
5562809/4: RNCC: 3 | RNVC: 2
5562809/4A: RNCC: 5 | RNVC: 2
5562809-4: RNCC: 5 | RNVC: 9

21 Apr 1981

5340-12-130-8315
Expansion Plug

121308315
DIN470-56ROH: RNCC: 2 | RNVC: 2
938291: RNCC: 5 | RNVC: 2
56DIN470: RNCC: 5 | RNVC: 2
56DIN470R0H: RNCC: 5 | RNVC: 2
DIN470-56R0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-153-8302
Nut And Bolt Locking Plate

121538302
100355-460000.04: RNCC: 2 | RNVC: 2
100355-460000.04: RNCC: 3 | RNVC: 2
100355-460000-04: RNCC: 5 | RNVC: 2
100355-460000-04: RNCC: 5 | RNVC: 9
100355-460000-04: RNCC: 5 | RNVC: 9
100355-460000.04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6531
Loop Clamp

127016531
VG95211-ML-127016531: RNCC: 2 | RNVC: 2
5.12.7207.1070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-336-6860
Loop Clamp

123366860
2300245-069983.00.0: RNCC: 2 | RNVC: 2
2300245-069983.00.0: RNCC: 3 | RNVC: 2

8 Dec 1994

5340-12-321-1221
Bow Handle

123211221
9000 2097: RNCC: 3 | RNVC: 2

29 Mar 1990

5340-12-388-8528
Mounting Bracket

123888528
5842001840: RNCC: 3 | RNVC: 2

27 Apr 2012

5340-12-371-7765
Loop Clamp

123717765
EN4113S34WR: RNCC: 2 | RNVC: 2

15 May 2007

5340-12-360-0474
Dust And Moisture Seal Protective Cap

123600474
9416980177: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-333-5464
Strap Fastener Loop

123335464
2300005-4194.03: RNCC: 2 | RNVC: 2
2300005-4194.03: RNCC: 3 | RNVC: 2
2300005-4194.03: RNCC: 3 | RNVC: 2
2300005-4194.03: RNCC: 3 | RNVC: 2
9903536: RNCC: 5 | RNVC: 9
2300005-4194.03: RNCC: 5 | RNVC: 9

4 Jan 1994

5340-12-166-1986
Folding Stay

121661986
KBJ92085: RNCC: 3 | RNVC: 2
KZ0435379: RNCC: 5 | RNVC: 2

12 Aug 1976

5340-12-319-5420
Angle Bracket

123195420
731.06.181: RNCC: 3 | RNVC: 2
V731.06.181: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-175-2666
Double Angle Bracket

121752666
WW310353: RNCC: 3 | RNVC: 2
WW310353: RNCC: 5 | RNVC: 2
WW310353: RNCC: 5 | RNVC: 2
WW 310 353: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-347-6143
Loop Clamp

123476143
1682-380203.000.0: RNCC: 2 | RNVC: 2
1682-380203.000.0: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-12-147-4115
Dust And Moisture Seal Protective Plug

121474115
SZM5FVA1060-2: RNCC: 3 | RNVC: 2
SZM5FVA1060-2: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-0077
Access Cover

123560077
0.0.026.79: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-359-8434
Spring Tension Clip

123598434
1868-252000.007.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-307-5539
Electrical-Mechanical Equipment Post

123075539
1270.1,8.0.412: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-12-701-2687
Mounting Bracket

127012687
5.12.4805.0420.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-2506
Nonmetallic Bumper

123312506
0.020.048.9: RNCC: 3 | RNVC: 2

7 Apr 1993

5340-12-091-4890

5340-12-043-3088

5340-12-364-4248
Metallic Bumper

123644248
T661P1002110: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-042-2512

5340-12-314-0854
Mending Plate

123140854
43712649-601: RNCC: 2 | RNVC: 2
43712649-601: RNCC: 3 | RNVC: 2

4 Jun 1988

5340-12-130-1176

5340-12-311-9843
Retaining Strap

123119843
272.313 258: RNCC: 2 | RNVC: 2
272.313.258: RNCC: 3 | RNVC: 2
272.313 258: RNCC: 5 | RNVC: 9

6 Nov 1987

5340-12-353-4562
Clamping Catch

123534562
P70157102500: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-12-321-1798
Spring Loaded Cylinder Fastener

123211798
2500067-102121.00: RNCC: 2 | RNVC: 2
2500067-102121.00: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-12-355-9954
Mounting Plate

123559954
5400051-148650.02: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-317-3217
Angle Bracket

123173217
4900064-4122.009: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-311-7981
Angle Bracket

123117981
4900278-103500.01: RNCC: 2 | RNVC: 2
4900278-103500.01: RNCC: 3 | RNVC: 2

19 Oct 1987

5340-12-186-7444
Loop Clamp

121867444
5802206-029000-001: RNCC: 2 | RNVC: 2
535.1295: RNCC: 3 | RNVC: 2
5351295: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-199-6153
Dust And Moisture Seal Protective Plug

121996153
399246: RNCC: 3 | RNVC: 2
7193-0016-399246: RNCC: 5 | RNVC: 2

16 May 1984

5340-12-362-1242
Rod End Connector

123621242
L50-57L235: RNCC: 3 | RNVC: 2

13 Jan 2004

5340-12-325-7849
Dust And Moisture Seal Protective Cap

123257849
3014620196: RNCC: 3 | RNVC: 2

9 Jul 1991

5340-12-310-0506
Spring Holder

123100506
3052 202 001: RNCC: 3 | RNVC: 2
3052202001: RNCC: 5 | RNVC: 9

1 Apr 1987

5340-12-322-7022
Clamping Catch

123227022
101.101702: RNCC: 3 | RNVC: 2
10.1702: RNCC: 5 | RNVC: 9

13 Sep 1990

5340-12-357-5292
Flush Lock

123575292
0008400484: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-390-0390
Headless Straight Rod

123900390
311367: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-321-2494
Angle Bracket

123212494
536L02045: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-315-2694
Retaining Strap

123152694
54.0026.148.00: RNCC: 3 | RNVC: 2

7 Oct 1988

5340-12-311-8429
Access Cover

123118429
2300074-3002.01: RNCC: 2 | RNVC: 2
2300074-3002.01: RNCC: 3 | RNVC: 2
2300074-3002.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-330-7860
Extension Drawer Slide Section

123307860
PG4001G027: RNCC: 3 | RNVC: 2
PG4001G027: RNCC: 5 | RNVC: 9

9 Feb 1993

5340-12-321-1548
Detent Plunger

123211548
5010610123: RNCC: 3 | RNVC: 2
5010610123: RNCC: 5 | RNVC: 2
5010610123: RNCC: 5 | RNVC: 2

6 Apr 1990

5340-12-337-7742
Mounting Plate

123377742
201256: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-321-1224
Access Door

123211224
9000 3015: RNCC: 3 | RNVC: 2

29 Mar 1990

5340-12-301-0994
Metal Runner

123010994
54.0028.164.00: RNCC: 3 | RNVC: 2

21 Sep 1984

5340-12-198-0444
Mending Plate

121980444
C42080-A6-B54: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-123-2604
Nut And Bolt Locking Plate

121232604
5150-56-01-26: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-319-8774
Metal Runner

123198774
120100000301: RNCC: 3 | RNVC: 2
467-422/4127-01-00-20: RNCC: 5 | RNVC: 2

14 Nov 1989

5340-12-177-4360
Spacing Threaded Standoff

121774360
PAN5170-08-110: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-12-150-3346
Angle Bracket

121503346
C20170-A82-C86: RNCC: 3 | RNVC: 2
C20170A82C86: RNCC: 5 | RNVC: 2
TFS7233086: RNCC: 5 | RNVC: 2
TFS72-33086: RNCC: 5 | RNVC: 9
TGRPL82T86: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-2184
Mending Plate

123282184
SK2504-19: RNCC: 3 | RNVC: 2
2490559: RNCC: 3 | RNVC: 2
5000821604: RNCC: 5 | RNVC: 2
SK2504-19: RNCC: 5 | RNVC: 2

23 Apr 1992

5340-12-355-9478
Double Angle Bracket

123559478
J92228401-003: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-390-5590
Multiple Angle Bracket

123905590
5804038-202200.03: RNCC: 2 | RNVC: 2

23 Nov 2012

5340-12-145-1426
Retaining Strap

121451426
161396203: RNCC: 3 | RNVC: 2
7101-17-36-05: RNCC: 5 | RNVC: 2
7101-17-36.05: RNCC: 5 | RNVC: 2
E7101-17-36-05: RNCC: 5 | RNVC: 2
E7101-17-36.05: RNCC: 5 | RNVC: 2
7101-17-36-05: RNCC: 5 | RNVC: 9
7101-17-36.05: RNCC: 5 | RNVC: 9
E7101-17-36-05: RNCC: 5 | RNVC: 9
E7101-17-36.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-3418
Dust And Moisture Seal Protective Plug

121883418
81960020070: RNCC: 3 | RNVC: 2
81.96002.0070: RNCC: 5 | RNVC: 2
90-201-00-817: RNCC: 5 | RNVC: 2
90.201.00.817: RNCC: 5 | RNVC: 2

1 Jul 1981

5340-12-378-3011
Metal Grille

123783011
8320-0085: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-178-0695
Expansion Plug

121780695
DIN443-22-2.0335.26: RNCC: 2 | RNVC: 2
DIN443-22-CUZN36F38: RNCC: 5 | RNVC: 2
0024484610: RNCC: 5 | RNVC: 2
22DIN443CUZN36F38: RNCC: 5 | RNVC: 2
22DIN443MS63F38: RNCC: 5 | RNVC: 2
0024484610: RNCC: 5 | RNVC: 9

16 Mar 1979

5340-12-355-2182
Quick Release Plunger

123552182
GN617-8-AK-NI: RNCC: 3 | RNVC: 2
P70162100004: RNCC: 5 | RNVC: 2

23 Oct 2001

5340-12-185-0639
T Bracket

121850639
F01-211170.07.0: RNCC: 3 | RNVC: 2
F01-211170-07-0: RNCC: 5 | RNVC: 2

6 Sep 1980

5340-12-701-5571
Loop Clamp

127015571
VG95211-ML-127015571: RNCC: 2 | RNVC: 2
5.12.6113.8010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-6606
Mending Plate

123326606
81254410379: RNCC: 2 | RNVC: 2
81254410379: RNCC: 3 | RNVC: 2
81.25441.0379: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-358-9192
Mounting Bracket

123589192
3805402073: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-306-8388
Bow Handle

123068388
2800017-530: RNCC: 2 | RNVC: 2
25300155: RNCC: 3 | RNVC: 2

9 Apr 1986

5340-12-380-6452
Bumper

123806452
017111-160N: RNCC: 3 | RNVC: 2

16 Nov 2009

5340-12-337-3434
Handle Grip

123373434
01011310: RNCC: 3 | RNVC: 2
01011310.164: RNCC: 5 | RNVC: 2

16 Feb 1995

5340-12-352-6737
Angle Bracket

123526737
15048401: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-186-4288
Helical Compression Spring Seat

121864288
5500530025: RNCC: 3 | RNVC: 2
EV174313: RNCC: 5 | RNVC: 2

30 Dec 1980

5340-12-190-8749
Helical Compression Spring Seat

121908749
2410501009: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-343-1932
Dust And Moisture Seal Protective Plug

123431932
17760036: RNCC: 3 | RNVC: 2
9319 0785: RNCC: 5 | RNVC: 2
93190785: RNCC: 5 | RNVC: 2

15 May 1997

5340-12-196-5145
Dust And Moisture Seal Protective Plug

121965145
81964100017: RNCC: 3 | RNVC: 2
81.96410.0017: RNCC: 5 | RNVC: 2

13 Jul 1983

5340-12-149-1009
Retaining Strap

121491009
521D20003D1: RNCC: 3 | RNVC: 2
521D20003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-323-4721
Helical Compression Spring Seat

123234721
225971: RNCC: 3 | RNVC: 2
1000203-20.01: RNCC: 5 | RNVC: 2

28 Nov 1990

5340-12-147-9147
Angle Bracket

121479147
258554: RNCC: 3 | RNVC: 2
0331 7967: RNCC: 5 | RNVC: 2
258554A3: RNCC: 5 | RNVC: 2
3317967KZ0154-46: RNCC: 5 | RNVC: 2
3317967: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-182-3274
Pipe Bracket

121823274
2300033-940112: RNCC: 2 | RNVC: 2
2300033-940112: RNCC: 5 | RNVC: 9

25 Jan 1980

5340-12-139-5588

5340-12-090-7133

5340-12-011-5327

5340-12-332-4349
Mounting Bracket

123324349
88415014800: RNCC: 3 | RNVC: 2
88.41501.4800: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-324-7659
Butt Hinge

123247659
2500171-423000.02: RNCC: 2 | RNVC: 2
2500171-423000.02: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-131-5632

5340-12-178-6747
Retaining Strap

121786747
8739950025: RNCC: 3 | RNVC: 2
8739950025: RNCC: 5 | RNVC: 2
8739950025: RNCC: 5 | RNVC: 9

9 May 1979

5340-12-174-2616
Angle Bracket

121742616
8475267: RNCC: 3 | RNVC: 2
1778-355: RNCC: 5 | RNVC: 2

19 Jun 1978

5340-12-387-8333
Mounting Bracket

123878333
7094195: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-155-8408

5340-12-181-1092
Angle Bracket

121811092
81974860230: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-347-2128
Nonmetallic Bumper

123472128
54.1100.285.02: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-386-2770
Snap-In Plain Standoff

123862770
2500262-531700.004.0: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-12-359-4769
Access Cover

123594769
2300373-430210.000: RNCC: 2 | RNVC: 2
2300373-430210.000: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-12-357-5414
Helical Compression Spring Retainer

123575414
5553039: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-369-4018
Runner

123694018
3030918: RNCC: 3 | RNVC: 2
3030.918: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-366-7071
Spacing Threaded Standoff

123667071
05.16.409: RNCC: 3 | RNVC: 2
006401181: RNCC: 5 | RNVC: 2

30 May 2005

5340-12-316-4204
Bow Handle

123164204
51-53139-VERZINKT: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-387-5652
Mounting Bracket

123875652
30150780: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-360-0992
Mounting Bracket

123600992
9424296768: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-357-3453
Retaining Strap

123573453
8811510011: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-122-6439
Stift

121226439
4049900838: RNCC: 3 | RNVC: 2
654041123800: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-5239
Mending Plate

123565239
SPAS-AS 4S: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-372-4141
Metal Grille

123724141
8320-0047: RNCC: 2 | RNVC: 2
8320-0047: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-315-8489
Plain Solid Disk

123158489
5019R-1100.07: RNCC: 3 | RNVC: 2
120160: RNCC: 5 | RNVC: 2

1 Dec 1988

5340-12-306-0770
Spring Tension Clip

123060770
0009883178: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-305-6267
Double Angle Bracket

123056267
635E02050: RNCC: 3 | RNVC: 2

28 Nov 1985

5340-12-300-9433
Shimmy Damper

123009433
01TL12584: RNCC: 3 | RNVC: 2
01TL12584: RNCC: 5 | RNVC: 9

13 Sep 1984

5340-12-332-6604
Angle Bracket

123326604
81429020165: RNCC: 2 | RNVC: 2
81429020165: RNCC: 3 | RNVC: 2
81.42902.0165: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-379-4104
Mounting Bracket

123794104
5802017-732131.00: RNCC: 2 | RNVC: 2
5802017-732131.00: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-12-340-5090
Handle Grip

123405090
0700-4000.03: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-12-383-8842
Webbing Strap

123838842
65000493: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-364-6627
Support Hook

123646627
209345: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-310-9094
Mounting Bracket

123109094
62395400: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-12-368-6679
Lock-Release Lever

123686679
4608980264: RNCC: 3 | RNVC: 2

5 Apr 2006

5340-12-186-0584
Angle Bracket

121860584
81974860541: RNCC: 3 | RNVC: 2

27 Nov 1980

5340-12-362-3707
Retaining Band

123623707
774282008: RNCC: 3 | RNVC: 2

12 Feb 2004

5340-12-174-0367
Dust And Moisture Seal Protective Cap

121740367
E24241: RNCC: 3 | RNVC: 2

31 May 1978

5340-12-320-9709
Bow Handle

123209709
3HE: RNCC: 3 | RNVC: 2
5L.3731.001.80: RNCC: 5 | RNVC: 2
5L.3731.001.80: RNCC: 5 | RNVC: 2

12 Mar 1990

5340-12-316-4145
Clamping Catch

123164145
0285802: RNCC: 3 | RNVC: 2
GZ02858: RNCC: 5 | RNVC: 2
81.41140.6005: RNCC: 5 | RNVC: 2
81411406005: RNCC: 5 | RNVC: 2

16 Jan 1989

5340-12-316-2943
Mending Plate

123162943
5194128: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-312-5136
Access Cover

123125136
04209874: RNCC: 3 | RNVC: 2
04209874: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-372-9140
Sliding Door Track

123729140
L521M3805105: RNCC: 3 | RNVC: 2

5 Sep 2007

5340-12-314-6887
Shimmy Damper

123146887
1547019: RNCC: 3 | RNVC: 2
1547019: RNCC: 5 | RNVC: 2

29 Jul 1988

5340-12-199-0629
Rigid Caster

121990629
293059F: RNCC: 3 | RNVC: 2
293059P: RNCC: 5 | RNVC: 2

22 Mar 1984

5340-12-322-8374
Retaining Band

123228374
3080300050: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-172-4555
Angle Bracket

121724555
4045250256: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-12-362-6212
Nonmetallic Bumper

123626212
12.7382-01-11-00.00-21: RNCC: 2 | RNVC: 2
12.7382-01-11-00.00-21: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-306-3205
Flush Catch Claw

123063205
8100219-1700-02: RNCC: 2 | RNVC: 2
4446 1141 00: RNCC: 3 | RNVC: 2
8100219-1700-02: RNCC: 5 | RNVC: 9

19 Feb 1986

5340-12-391-0462
Spacing Threaded Standoff

123910462
601215-202200.05: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-302-9653
Resilient Mount

123029653
86002808: RNCC: 3 | RNVC: 2
86002808ED5045-42: RNCC: 5 | RNVC: 2

12 Feb 1985

5340-12-153-5329
Nut And Bolt Locking Plate

121535329
100355-001900.04: RNCC: 2 | RNVC: 2
100355-001900-04: RNCC: 3 | RNVC: 2
100355-001900-04: RNCC: 5 | RNVC: 9
100355-001900-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-167-5283
Mending Plate

121675283
23290-142281: RNCC: 2 | RNVC: 2

3 Jan 1977

5340-12-363-8172
Lock-Release Lever

123638172
J52422518-003: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-12-155-6204
Pipe Bracket

121556204
160-77236-01: RNCC: 3 | RNVC: 2
160-77236-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-9866
Mechanical Stop

123489866
245/7346-43-00-10: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-186-8789
Stuetze

121868789
051975: RNCC: 3 | RNVC: 2

16 Feb 1981

5340-12-351-3239
Mounting Bracket

123513239
2500113-6410: RNCC: 2 | RNVC: 2
2500113-6410: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-372-8076
Butt Hinge Leaf

123728076
A121844.01: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-12-359-7123
Access Cover

123597123
9762611333: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-188-3416
Manual Control Handle

121883416
81618526038: RNCC: 3 | RNVC: 2
81.61852.6038: RNCC: 5 | RNVC: 2

1 Jul 1981

5340-12-325-5511
Bail Handle

123255511
6417500093: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-12-311-6895
Helical Compression Spring Seat

123116895
281424: RNCC: 3 | RNVC: 2
281424: RNCC: 5 | RNVC: 9

6 Oct 1987

5340-12-365-6042
Mounting Bracket

123656042
9414294840: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-307-5091
Strap Hinge

123075091
601A648: RNCC: 3 | RNVC: 2
AEGN451021: RNCC: 5 | RNVC: 2
N451021: RNCC: 5 | RNVC: 2

25 Jun 1986

5340-12-365-6065
Angle Bracket

123656065
2641610: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-348-1493
Rod End Clevis

123481493
4033.3104: RNCC: 3 | RNVC: 2
40333104: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-12-362-9329
Angle Bracket

123629329
4618200314: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-12-147-6936
Clamping Catch

121476936
ZB7611: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-176-4068
Retaining Strap

121764068
LN29836B40: RNCC: 2 | RNVC: 2

27 Nov 1978

5340-12-315-8279
Access Cover

123158279
54.0026.972.02: RNCC: 3 | RNVC: 2
54002697202: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-307-7046
Mending Plate

123077046
RP650870: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-138-3881

5340-12-305-0064
Double Angle Bracket

123050064
0214 9354: RNCC: 3 | RNVC: 2
02149354EE0148-20: RNCC: 5 | RNVC: 2

17 Sep 1985

5340-12-303-4375
Flush Lock

123034375
1157300135: RNCC: 3 | RNVC: 2

22 Mar 1985

5340-12-360-8523
Manual Control Lever

123608523
000420-010210.00: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-12-349-7874
Mounting Plate

123497874
105-61701.31: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-375-0324
Spacing Threaded Standoff

123750324
8189646: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-12-321-4022
Electrical-Mechanical Equipment Post

123214022
7681041115: RNCC: 3 | RNVC: 2
76810 41115: RNCC: 5 | RNVC: 9

16 May 1990

5340-12-190-5998
Loop Clamp

121905998
02483398: RNCC: 3 | RNVC: 2
02483398: RNCC: 5 | RNVC: 2
2483398: RNCC: 5 | RNVC: 2
2483398EC5034-71: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-040-1771

5340-12-132-8191

5340-12-131-0711
Pipe Bracket

121310711
0144-63-12-10: RNCC: 3 | RNVC: 2
0797-617: RNCC: 5 | RNVC: 2
8451732: RNCC: 5 | RNVC: 2
3631190KZ0144-63: RNCC: 5 | RNVC: 2
0363 1190: RNCC: 5 | RNVC: 2
3631190: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-380-8377
Mounting Bracket

123808377
2W112AD010-2200: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-186-6479
Spring Tension Clip

121866479
4-105758: RNCC: 3 | RNVC: 2

23 Jan 1981

5340-12-303-1624
Dust And Moisture Seal Protective Cap-Plug

123031624
T8AS: RNCC: 3 | RNVC: 2
C 4098 657 21: RNCC: 5 | RNVC: 2
C 4098 657 21: RNCC: 5 | RNVC: 2

1 Mar 1985

5340-12-335-4734
Electronic Equipment Hardware Kit

123354734
8 692 020 365: RNCC: 3 | RNVC: 2

22 Aug 1994

5340-12-310-1281
Retaining Strap

123101281
09012607000: RNCC: 3 | RNVC: 2

9 Apr 1987

5340-12-305-6123
Angle Bracket

123056123
4065503140: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-320-4770
Spring Holder

123204770
6233107: RNCC: 3 | RNVC: 2
6233 107: RNCC: 5 | RNVC: 2

18 Jan 1990

5340-12-328-4944
Mending Plate

123284944
2300354-509920-002: RNCC: 2 | RNVC: 2
07655-730071-99: RNCC: 5 | RNVC: 9

23 May 1992

5340-12-361-4349
Track Stop

123614349
65126-16000: RNCC: 2 | RNVC: 2
65126-16000: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-193-9843
Dust And Moisture Seal Protective Cap

121939843
F00993820: RNCC: 3 | RNVC: 2
F0.099.3820: RNCC: 5 | RNVC: 2
KD498-80-37PPD: RNCC: 5 | RNVC: 9

21 Sep 1982

5340-12-179-7036
Spring Tension Clip

121797036
80624: RNCC: 3 | RNVC: 2
81.90410-0012: RNCC: 5 | RNVC: 2
81904100012: RNCC: 5 | RNVC: 2
01-2582: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-12-337-2948
Double Angle Bracket

123372948
6700017-200000.20: RNCC: 2 | RNVC: 2
6700017-200000.20: RNCC: 3 | RNVC: 2

14 Feb 1995

5340-12-366-6519
Mounting Bracket

123666519
946538877: RNCC: 3 | RNVC: 2
3501-100.01.00.006-001: RNCC: 5 | RNVC: 2

19 May 2005

5340-12-183-8700
Butt Hinge Leaf

121838700
5801225-12200: RNCC: 2 | RNVC: 2
5801225-12200: RNCC: 3 | RNVC: 2
5801225-12200: RNCC: 3 | RNVC: 2
5801225-12200: RNCC: 5 | RNVC: 9
5801225-12200: RNCC: 5 | RNVC: 9

29 May 1980

5340-12-700-1906
Retaining Clamp Assembly

127001906
51-260091054: RNCC: 2 | RNVC: 2
765-05-SB22: RNCC: 5 | RNVC: 2

4 Nov 1991

5340-12-320-8548
Mounting Bracket

123208548
2654-331000.06: RNCC: 2 | RNVC: 2
2654-331000.06: RNCC: 3 | RNVC: 2
2654-331 000.06: RNCC: 5 | RNVC: 9
679-01000000.06: RNCC: 5 | RNVC: 9
679-01000000.06: RNCC: 5 | RNVC: 9

28 Feb 1990

5340-12-302-5293
Electrical-Mechanical Equipment Post

123025293
VG95148C5,5XM3X10-ST-B2C: RNCC: 2 | RNVC: 2
M3/M3X8/10WN0425011-ST-B2G: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X10-ST-B2C: RNCC: 3 | RNVC: 2
048110442: RNCC: 5 | RNVC: 2

10 Jan 1985

5340-12-332-0544
Angle Bracket

123320544
480-7346-03-00-00-3: RNCC: 3 | RNVC: 2
480/7346-03-00-00/3: RNCC: 5 | RNVC: 2

20 Jul 1993

5340-12-363-1279
Mounting Plate

123631279
160-27203-05: RNCC: 3 | RNVC: 2
160-27203.05: RNCC: 5 | RNVC: 2

6 May 2004

5340-12-328-4113
Nonmetallic Bumper

123284113
4700079: RNCC: 3 | RNVC: 2
0019875940: RNCC: 5 | RNVC: 2

15 May 1992

5340-12-389-5942
Loop Clamp

123895942
000000006288: RNCC: 3 | RNVC: 2

26 Jul 2012

5340-12-310-6217
Loop Clamp

123106217
52.0259.222.02: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-302-2625
Mending Plate

123022625
42408176: RNCC: 3 | RNVC: 2
163773101: RNCC: 3 | RNVC: 2
42408176EZ7101-71: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-12-374-5178
Latch Bar

123745178
4138 202 017: RNCC: 1 | RNVC: 2
4138 202 017: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-12-164-5068
Retaining Strap

121645068
103071501: RNCC: 3 | RNVC: 2
E103071501: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-0500
Section Block Clamp

123900500
312338: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-388-0794
Mounting Plate

123880794
5000161723: RNCC: 3 | RNVC: 2
CV135667: RNCC: 5 | RNVC: 2
0161723: RNCC: 5 | RNVC: 2
0161723: RNCC: 5 | RNVC: 9

23 Feb 2012

5340-12-357-2777
Mounting Bracket

123572777
5582959: RNCC: 2 | RNVC: 2
5582959: RNCC: 3 | RNVC: 2

29 May 2002

5340-12-370-6292
Mounting Plate

123706292
4068 301 208: RNCC: 3 | RNVC: 2

4 Dec 2006

5340-12-141-5301
Blatt- Feder

5340-12-158-6747

5340-12-150-8596
Rod End Connector

121508596
8332360234: RNCC: 2 | RNVC: 2
8332360234: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-7921
Mending Plate

123027921
178.E43.80A: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-300-6364
Plain Solid Disk

123006364
1686-916130: RNCC: 3 | RNVC: 2

18 Aug 1984

5340-12-376-0969
Barrel Bolt

123760969
1521133: RNCC: 3 | RNVC: 2

12 Aug 2008

5340-12-130-2954

5340-12-093-7674

5340-12-387-5715
Mounting Bracket

123875715
GE9102T959: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-392-3362
Elastic Strap

123923362
4100095-982436.003.0: RNCC: 2 | RNVC: 2
4100095-982436.003.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-358-7567
Angle Bracket

123587567
2481-392415.000.0: RNCC: 2 | RNVC: 2
2481-392415.000.0: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-336-2650
Access Cover

123362650
4620 306 419: RNCC: 3 | RNVC: 2
4620306419: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-370-7906
Door Handle

123707906
7H0 837 114 9B9: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-340-0721
Handle Grip

123400721
1509827: RNCC: 3 | RNVC: 2

23 Feb 1996

5340-12-352-9883
Mounting Plate

123529883
F04743: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-184-9963
Butt Hinge Leaf

121849963
CF 327 117 B: RNCC: 3 | RNVC: 2
CF327117B: RNCC: 5 | RNVC: 2
CF327117A: RNCC: 5 | RNVC: 2
CF 327 117 B: RNCC: 5 | RNVC: 2
CF327117A: RNCC: 5 | RNVC: 2
CF327117B: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-168-9336
Access Cover

121689336
WW304967A: RNCC: 3 | RNVC: 9
WW 304 967 A: RNCC: 5 | RNVC: 2
WW304967A: RNCC: 5 | RNVC: 2
WW 304 967 A: RNCC: 5 | RNVC: 9

13 Apr 1977

5340-12-333-0457
Spacing Threaded Standoff

123330457
2 805 102 460: RNCC: 3 | RNVC: 2
2805102460: RNCC: 5 | RNVC: 2

22 Oct 1993

5340-12-367-3047
Spacing Threaded Standoff

123673047
5.13.129: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-12-365-3912
Mounting Bracket

123653912
2500075-730203.004.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-701-2683
Lock-Release Lever

127012683
5.12.4805.0212.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-368-9335
Mounting Bracket

123689335
1555600: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-188-7431
Flange Protector

121887431
3097660125: RNCC: 3 | RNVC: 2

28 Jul 1981

5340-12-332-7311
Access Cover

123327311
6808921: RNCC: 3 | RNVC: 2

13 Sep 1993

5340-12-358-7381
Runner

123587381
2481-391210.001.0: RNCC: 2 | RNVC: 2
2481-391210.001.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-175-3357
Dust And Moisture Seal Protective Cap

121753357
049903193: RNCC: 3 | RNVC: 2

11 Sep 1978

5340-12-333-4366
Lock-Release Lever

123334366
050377: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-371-4880
Retaining Strap

123714880
7785266: RNCC: 3 | RNVC: 2
99707785266: RNCC: 5 | RNVC: 2

5 Apr 2007

5340-12-346-6317
Access Cover

123466317
100.458: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-12-308-5964
Extension Drawer Slide

123085964
1201.16023: RNCC: 3 | RNVC: 2
031.16023: RNCC: 5 | RNVC: 2

28 Oct 1986

5340-12-309-4964
Webbing Strap

123094964
5400029-600: RNCC: 2 | RNVC: 2
5400029-600: RNCC: 5 | RNVC: 9

28 Jan 1987

5340-12-308-3045
Lock-Release Lever

123083045
3346601: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-198-2710
Double Angle Bracket

121982710
27 0319 127: RNCC: 2 | RNVC: 2
9849697: RNCC: 3 | RNVC: 2
27 0319 127: RNCC: 5 | RNVC: 9
9849697: RNCC: 5 | RNVC: 9
270319127: RNCC: 5 | RNVC: 9

9 Jan 1984

5340-12-323-9702
Lock-Release Lever

123239702
2300002-187340.000: RNCC: 2 | RNVC: 2
2300002-187340.000: RNCC: 3 | RNVC: 2
2300002-187340.000: RNCC: 5 | RNVC: 9
2300002-187340.000: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-323-8151
Mounting Plate

123238151
100-00082-12.03: RNCC: 2 | RNVC: 2
100-00082-12.03: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-175-0162
Retaining Strap

121750162
44-25579: RNCC: 3 | RNVC: 2

16 Aug 1978

5340-12-702-7099
Mounting Plate

127027099
25-08301005754: RNCC: 2 | RNVC: 2

5 Dec 1995

5340-12-391-1538
Catch Strike

123911538
V951L7-5AGV: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-12-375-0273
Bail Handle

123750273
588.70-400004-006: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-12-163-3420
Helical Compression Spring Seat

121633420
3420120000: RNCC: 3 | RNVC: 2
0003015037: RNCC: 5 | RNVC: 2
0003015144: RNCC: 5 | RNVC: 2
WMS2218-503X: RNCC: 5 | RNVC: 2
0003015144: RNCC: 5 | RNVC: 9
3015037: RNCC: 5 | RNVC: 9
0003015037: RNCC: 5 | RNVC: 9
3015144: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-7430
Metal Runner

123087430
KM.S01-110000.001: RNCC: 3 | RNVC: 2

13 Nov 1986

5340-12-313-7193
Resilient Mount

123137193
VG95446T05H005Z: RNCC: 2 | RNVC: 2
54015011: RNCC: 3 | RNVC: 2
313040: RNCC: 5 | RNVC: 2
C42165-A97-C5: RNCC: 5 | RNVC: 2

28 Apr 1988

5340-12-182-3730
Resilient Mount

121823730
640206U09-062ST: RNCC: 3 | RNVC: 2

28 Jan 1980

5340-12-326-6910
Electronic Equipment Hardware Kit

123266910
7800011600: RNCC: 3 | RNVC: 2
5802233-010600.000: RNCC: 5 | RNVC: 9
78000 11600: RNCC: 5 | RNVC: 9

22 Oct 1991

5340-12-195-9927
Loop Clamp

121959927
NX5: RNCC: 3 | RNVC: 2
221-10050: RNCC: 5 | RNVC: 2

13 May 1983

5340-12-386-5473
Bumper

123865473
174.00007: RNCC: 3 | RNVC: 2
700-17400007: RNCC: 5 | RNVC: 2

9 Sep 2011

5340-12-198-4319
Webbing Strap

121984319
2500138-150100.02: RNCC: 2 | RNVC: 2
2500138-150100.02: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-12-175-2671
Loop Clamp

121752671
WW310095B: RNCC: 3 | RNVC: 2
WW310095B: RNCC: 5 | RNVC: 2
WW310095B: RNCC: 5 | RNVC: 2
WW 310 095 B: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-178-7803
Electrical-Mechanical Equipment Post

121787803
10449-02: RNCC: 3 | RNVC: 2
477111-001: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-188-7742
Webbing Strap

121887742
5801479-3153: RNCC: 2 | RNVC: 2
5801479-3153: RNCC: 3 | RNVC: 2
5801479-3153: RNCC: 3 | RNVC: 2
5801479-3153: RNCC: 5 | RNVC: 9
5801479-3153: RNCC: 5 | RNVC: 9
000-F1-25X2,0X220-PE-RAL6031: RNCC: 6 | RNVC: 9

29 Jul 1981

5340-12-324-8431
Kunst Gleitschiene

123248431
6600133-331110.010: RNCC: 2 | RNVC: 2
002 529 000-116: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-328-9548
Electrical-Mechanical Equipment Post

123289548
5802259-1112.003: RNCC: 2 | RNVC: 2
5802259-1112.003: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-309-3802
Angle Bracket

123093802
5300000-00272: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-12-319-0700
Angle Bracket

123190700
6600015-201.003: RNCC: 3 | RNVC: 2
6600015-201.003: RNCC: 5 | RNVC: 9

4 Sep 1989

5340-12-371-5426
Retaining Clip

123715426
T881M4032211: RNCC: 2 | RNVC: 2
T881M4032211: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-382-1734
Angle Bracket

123821734
5231500073: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-317-5152
Nonmetallic Bumper

123175152
21710001: RNCC: 3 | RNVC: 2

14 Apr 1989

5340-12-322-0165
Loop Clamp

123220165
7633 222 105: RNCC: 3 | RNVC: 2
7633222105: RNCC: 5 | RNVC: 2
7633222105: RNCC: 5 | RNVC: 9

17 Jul 1990

5340-12-377-4330
Retaining Bail

123774330
41215037: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-044-4979

5340-12-131-5491

5340-12-360-5101
Nonmetallic Bumper

123605101
81960200236: RNCC: 3 | RNVC: 2
81.96020.0236: RNCC: 5 | RNVC: 2

28 May 2003

5340-12-365-2305
Double Angle Bracket

123652305
2500135-730203.006.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-319-4187
Mounting Bracket

123194187
4900059-751242.000.0: RNCC: 3 | RNVC: 2
1284051: RNCC: 5 | RNVC: 2

29 Sep 1989

5340-12-192-8619
Lock-Release Lever

121928619
4616840054: RNCC: 3 | RNVC: 2
721 1 62 099 1: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-335-7802
Access Cover

123357802
2782-360910.001.0: RNCC: 2 | RNVC: 2
2782-360910.001.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-366-9294
Clamping Catch

123669294
1876020150-S.110.53: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-12-197-0224
Dust And Moisture Seal Protective Plug

121970224
7478.0: RNCC: 3 | RNVC: 2

12 Sep 1983

5340-12-378-3463
Angle Bracket

123783463
598102-830110.002.0: RNCC: 2 | RNVC: 2
598102-830110.002.0: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-335-0747
Angle Bracket

123350747
0048-208000A03B: RNCC: 2 | RNVC: 2
0048-208000A03B: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-12-328-9589
Spring Tension Clip

123289589
50251: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-311-8439
Mending Plate

123118439
2300074-5550.01: RNCC: 2 | RNVC: 2
2300074-5550.01: RNCC: 3 | RNVC: 2
2300074-5550.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-180-6765
Bail Handle

121806765
R21617: RNCC: 3 | RNVC: 2
R21617: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-315-1906
Angle Bracket

123151906
6202953240: RNCC: 3 | RNVC: 2
620 295 32 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-362-1401
Arched Cushion

123621401
11195000: RNCC: 3 | RNVC: 2
LFPC150: RNCC: 5 | RNVC: 2
LFPC150: RNCC: 5 | RNVC: 2
364-6558: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-12-338-7794
Angle Bracket

123387794
2300137-240000.001: RNCC: 2 | RNVC: 2
2300137-240000.001: RNCC: 3 | RNVC: 2
2300137-240000.001: RNCC: 5 | RNVC: 9

24 Aug 1995

5340-12-376-9172
Spring Tension Clip

123769172
241705: RNCC: 3 | RNVC: 2
400-820.1005.4: RNCC: 5 | RNVC: 2

21 Nov 2008

5340-12-371-9712
Angle Bracket

123719712
S282M4024101: RNCC: 2 | RNVC: 2
S282M4024101: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-374-3476
Mounting Plate

123743476
5324361: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-12-350-4065
Handle Grip

123504065
RC003200: RNCC: 3 | RNVC: 2

28 Mar 2000

5340-12-020-7562

5340-12-386-1506
Access Cover

123861506
2500261-182430.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-311-4607
Strap Fastener Loop

123114607
DFVLR40-091-9: RNCC: 3 | RNVC: 2
DFVLR40-091-9: RNCC: 3 | RNVC: 2

4 Sep 1987

5340-12-384-3661
Mounting Plate

123843661
7010713-000210.03: RNCC: 3 | RNVC: 2
SK1034-003030.001.0: RNCC: 3 | RNVC: 2
7106614: RNCC: 5 | RNVC: 2

17 Feb 2011

5340-12-356-5068
Access Cover

123565068
E11.07788-0019: RNCC: 3 | RNVC: 2
11.07700-0136POS136: RNCC: 5 | RNVC: 2
11.07788-0019: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-12-701-7737
Mounting Bracket

127017737
VG95211-ML-127017737: RNCC: 2 | RNVC: 2
5.12.7702.8170.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-5724
Electrical-Mechanical Equipment Post

121825724
C145-A5-C123: RNCC: 2 | RNVC: 2
C145A5C123: RNCC: 3 | RNVC: 2
C145-A5-C123: RNCC: 5 | RNVC: 2
C145A5C123: RNCC: 5 | RNVC: 2
252200117001: RNCC: 5 | RNVC: 2
C145-A5-C123: RNCC: 5 | RNVC: 2

12 Feb 1980

5340-12-373-4052
Key Holder

123734052
PMAAC/22/03-07: RNCC: 3 | RNVC: 2
8415-00606: RNCC: 6 | RNVC: 9
55970A010: RNCC: 6 | RNVC: 9

30 Oct 2007

5340-12-175-3197
Retaining Strap

121753197
7882-231: RNCC: 3 | RNVC: 2
7882231: RNCC: 5 | RNVC: 2
1000025-593000-02: RNCC: 5 | RNVC: 9
1000025-593000.02: RNCC: 5 | RNVC: 9

11 Sep 1978

5340-12-188-1794
Halter

121881794
409037024: RNCC: 3 | RNVC: 2
409.037024: RNCC: 5 | RNVC: 2
38 702-037: RNCC: 5 | RNVC: 2
38702-037: RNCC: 5 | RNVC: 2
409-037024: RNCC: 5 | RNVC: 9

11 Jun 1981

5340-12-319-7911
Retaining Band

123197911
335907-1701.000: RNCC: 2 | RNVC: 2
335907-1701.000: RNCC: 3 | RNVC: 2
335907-1701.000: RNCC: 5 | RNVC: 9

6 Nov 1989

5340-12-168-2443
Helical Compression Spring Seat

121682443
E4-2003630: RNCC: 3 | RNVC: 2
E4-2003630: RNCC: 5 | RNVC: 9

28 Feb 1977

5340-12-124-4597
Leather Strap

121244597
NO PRIMARY REF 12-124-4597: RNCC: 3 | RNVC: 2
A16X300DIN6408ANGEBRAEUNTGENAEHT: RNCC: 5 | RNVC: 9
DIN6408-A16X300-ANGEBRAEUNT,GENA: RNCC: 5 | RNVC: 9
DIN6408-A16X300-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9
DIN6408-A16X300-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-176-3277
Loop Clamp

121763277
PAN4263-45: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-702-2006
Mounting Bracket

127022006
VG95211-ML-127022006: RNCC: 2 | RNVC: 2
30.7211.1008: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-6660
Bow Handle

123336660
16 400 7504: RNCC: 3 | RNVC: 2
16-400-7504: RNCC: 5 | RNVC: 2
D164007504: RNCC: 5 | RNVC: 2

20 Jan 1994

5340-12-185-0480
Helical Compression Spring Seat

121850480
061490: RNCC: 3 | RNVC: 2
061490-200-40-10-00: RNCC: 5 | RNVC: 2
061490: RNCC: 5 | RNVC: 9
061490-200-40-10-00: RNCC: 5 | RNVC: 9

4 Sep 1980

5340-12-702-7557
Plug Button

127027557
50-06101660085: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-386-7281
Catch Strike

123867281
6010-16-JQ: RNCC: 3 | RNVC: 2

27 Sep 2011

5340-12-182-1614
Angle Bracket

121821614
2300033-430430-06: RNCC: 2 | RNVC: 2
2300033-430430-06: RNCC: 5 | RNVC: 9
2300033-430430.06: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-307-1675
Nonmetallic Bumper

123071675
4900241-111200.002: RNCC: 2 | RNVC: 2
4900241-111200.002: RNCC: 3 | RNVC: 2
279.991410: RNCC: 3 | RNVC: 2
82200-4900241-111200.002: RNCC: 5 | RNVC: 2
279.991410: RNCC: 5 | RNVC: 9
279.991410: RNCC: 5 | RNVC: 9

16 May 1986

5340-12-320-5701
Nonmetallic Bumper

123205701
42342007ED55-4070: RNCC: 3 | RNVC: 2
469/81.010/702FNKN4590: RNCC: 3 | RNVC: 2
469/81.010/702: RNCC: 5 | RNVC: 2
4234 2007: RNCC: 5 | RNVC: 2
42342007ED55-4070: RNCC: 5 | RNVC: 2
42342007: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-337-6760
Dust And Moisture Seal Protective Plug

123376760
300V4: RNCC: 3 | RNVC: 2
100067139: RNCC: 5 | RNVC: 2
10 0067 139: RNCC: 5 | RNVC: 2
GPN300,V4: RNCC: 5 | RNVC: 9
GPN300-V4: RNCC: 5 | RNVC: 9
V4: RNCC: 5 | RNVC: 9
GPN300/V4: RNCC: 5 | RNVC: 9

27 Mar 1995

5340-12-350-7718
Mounting Plate

123507718
105-90022.75: RNCC: 3 | RNVC: 2

18 May 2000

5340-12-381-0535
Spring Loaded Cylinder Fastener

123810535
S1514SP30X3X60: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-12-304-0460
Flush Lock

123040460
251829231B: RNCC: 3 | RNVC: 9

3 Jun 1985

5340-12-022-7103

5340-12-023-1927

5340-12-025-7468

5340-12-351-6761
Mounting Bracket

123516761
2300387-660411.000: RNCC: 2 | RNVC: 2
9903933: RNCC: 3 | RNVC: 2
2300387-660411.000: RNCC: 5 | RNVC: 9
9903933: RNCC: 5 | RNVC: 9

15 Aug 2000

5340-12-346-4593
Spring Tension Clip

123464593
2020: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-12-332-6599
Mending Plate

123326599
81974870498: RNCC: 2 | RNVC: 2
81974870498: RNCC: 3 | RNVC: 2
81.97487.0498: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-331-8157
Lock-Release Lever

123318157
2422003066: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-360-8722
Mounting Bracket

123608722
15714501: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-12-338-9633
Protection Bellows

123389633
49.50 40 00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-12-371-7036
Helical Compression Spring Seat

123717036
42656: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-199-4153
Double Angle Bracket

121994153
3104271289: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-312-3439
Escutcheon Plate

123123439
100000841: RNCC: 2 | RNVC: 2
100000841: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-12-303-5376
Pad Eye

123035376
7820403103: RNCC: 3 | RNVC: 2
78204 03103: RNCC: 5 | RNVC: 2

2 Apr 1985

5340-12-380-8790
Dust And Moisture Seal Protective Cap

123808790
L304M2001206: RNCC: 3 | RNVC: 2

8 Dec 2009

5340-12-360-1546
Mounting Bracket

123601546
9425404773: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-163-5658
Loop Clamp

121635658
LN9490BM12: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-011-5610

5340-12-309-4148
Nonmetallic Bumper

123094148
4063380082: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-12-334-2870
Mending Plate

123342870
M642098: RNCC: 3 | RNVC: 9

22 Apr 1994

5340-12-192-3933
Dust And Moisture Seal Protective Cap

121923933
1000502005: RNCC: 3 | RNVC: 2

20 Apr 1982

5340-12-388-8903
Suction Cup

123888903
119001000001: RNCC: 3 | RNVC: 2
119001000001: RNCC: 5 | RNVC: 2

3 May 2012

5340-12-168-2685
Retaining Strap

121682685
909620501: RNCC: 3 | RNVC: 2
E909620501: RNCC: 5 | RNVC: 9

2 Mar 1977

5340-12-337-1392
Spacing Threaded Standoff

123371392
52.9352.102.17: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-12-317-5151
Retaining Strap

123175151
61710006: RNCC: 3 | RNVC: 2

14 Apr 1989

5340-12-353-8840
Mounting Plate

123538840
209420: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-300-7457
Nonmetallic Bumper

123007457
A11A522440002: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-166-3064
Helical Compression Spring Seat

121663064
113129909: RNCC: 3 | RNVC: 9

22 Jul 1976

5340-12-308-8693
Mending Plate

123088693
490500002: RNCC: 3 | RNVC: 2
490.5000.02: RNCC: 5 | RNVC: 2

25 Nov 1986

5340-12-153-7065
Bow Handle

121537065
8792025017: RNCC: 3 | RNVC: 2
8792025017: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-0549
Angle Bracket

121910549
6171591240: RNCC: 3 | RNVC: 2

11 Jan 1982

5340-12-314-8045
Loop Clamp

123148045
SC7.45MM: RNCC: 3 | RNVC: 2
774210977: RNCC: 5 | RNVC: 2

12 Aug 1988

5340-12-315-3017
Mounting Bracket

123153017
6205010020: RNCC: 3 | RNVC: 2
620 501 00 20: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-184-7745
Nonmetallic Bumper

121847745
CF415169: RNCC: 3 | RNVC: 2
CF 415 169: RNCC: 5 | RNVC: 2
CF415169: RNCC: 5 | RNVC: 2
CF 415 169: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-315-8272
Access Cover

123158272
54.0026.030.01: RNCC: 3 | RNVC: 2
54002603001: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-341-9157
Butt Hinge

123419157
3229180251: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-12-319-6431
Headless Straight Rod

123196431
503471: RNCC: 3 | RNVC: 2

20 Oct 1989

5340-12-391-4453
Mounting Plate

123914453
I010158TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-040-0177

5340-12-321-5033
Angle Bracket

123215033
160.03.0001: RNCC: 2 | RNVC: 2
160.03.0001: RNCC: 3 | RNVC: 2

25 May 1990

5340-12-359-7368
Mounting Bracket

123597368
S282M4013101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-306-3626
Webbing Strap

123063626
5801984-984510.000.0: RNCC: 2 | RNVC: 2
5801984-984510.000.0: RNCC: 3 | RNVC: 2

24 Feb 1986

5340-12-361-0766
Access Cover

123610766
A1Z10140517: RNCC: 2 | RNVC: 2
A1Z10140517: RNCC: 3 | RNVC: 2
10140517: RNCC: 5 | RNVC: 2
58R105-6-7: RNCC: 5 | RNVC: 2

19 Aug 2003

5340-12-303-9877
Retaining Strap

123039877
K6222: RNCC: 3 | RNVC: 2
KLPKS72.20-2: RNCC: 5 | RNVC: 2

29 May 1985

5340-12-305-3804
Spring Tension Clip

123053804
C-115968: RNCC: 3 | RNVC: 2
C-115968: RNCC: 5 | RNVC: 2

29 Oct 1985

5340-12-304-4310
Access Cover

123044310
4/0953/7008/1: RNCC: 2 | RNVC: 2
4/0953/7008/1: RNCC: 3 | RNVC: 2

17 Jul 1985

5340-12-180-8569
Mending Plate

121808569
CF 420 669 A: RNCC: 2 | RNVC: 2
CF 420 669 A: RNCC: 3 | RNVC: 2
CF420669A: RNCC: 5 | RNVC: 2
CF420669A: RNCC: 5 | RNVC: 2
CF420669A: RNCC: 5 | RNVC: 2
CF 420 669 A: RNCC: 5 | RNVC: 2
CF 420 669 A: RNCC: 5 | RNVC: 2

8 Oct 1979

5340-12-393-0207
Mounting Bracket

123930207
1030105-260000.002.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-314-3743
Webbing Strap

123143743
4357907371: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-12-370-4334
Angle Bracket

123704334
7803200291AA: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-12-301-9671
Nonmetallic Bumper

123019671
4-V2823-A-1: RNCC: 3 | RNVC: 2

21 Nov 1984

5340-12-354-5965
Mounting Bracket

123545965
05.114.76.08.0: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-372-0039
Rod End Clevis

123720039
8412998: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-393-0360
Clamping Catch

123930360
591.308: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-370-7527
Mounting Bracket

123707527
81 322 752 321: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-12-195-4211
Retaining Strap

121954211
98105544: RNCC: 3 | RNVC: 2
98105544: RNCC: 5 | RNVC: 9

23 Feb 1983

5340-12-136-7668
Retaining Strap

121367668
4049950010: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-303-1008
Dust And Moisture Seal Protective Cap

123031008
357412135: RNCC: 3 | RNVC: 9

25 Feb 1985

5340-12-307-7037
Angle Bracket

123077037
RP988978: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-198-3334
Friction Catch Stud

121983334
27 0318 134: RNCC: 2 | RNVC: 2
9859998: RNCC: 3 | RNVC: 9
27 0318 134: RNCC: 5 | RNVC: 2
27 0318 134: RNCC: 5 | RNVC: 9
270318134: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-329-9289
Mounting Bracket

123299289
10 0013 735: RNCC: 3 | RNVC: 2
100013735: RNCC: 5 | RNVC: 2

14 Oct 1992

5340-12-330-1400
Plain Solid Disk

123301400
0851 9516.003: RNCC: 3 | RNVC: 2
8519516.003: RNCC: 5 | RNVC: 2

7 Nov 1992

5340-12-314-1251
Mounting Bracket

123141251
3875450540: RNCC: 3 | RNVC: 2
387 545 05 40: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-175-7012
Nonmetallic Bumper

121757012
WW 407 117: RNCC: 2 | RNVC: 2
WW 407 117: RNCC: 3 | RNVC: 9
WW 407 117: RNCC: 5 | RNVC: 2
WW407117: RNCC: 5 | RNVC: 2
WW407117: RNCC: 5 | RNVC: 9

11 Oct 1978

5340-12-318-0176
Nonmetallic Bumper

123180176
51961012006: RNCC: 3 | RNVC: 2
51.96101.2006: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-318-1871
Catch Strike

123181871
6417250018: RNCC: 3 | RNVC: 2
641 725 00 18: RNCC: 5 | RNVC: 2

19 Jun 1989

5340-12-350-8356
Verriegelun Buegel

123508356
58R119-1171: RNCC: 3 | RNVC: 2

26 May 2000

5340-12-701-3468
Mounting Bracket

127013468
VG95211-ML-127013468: RNCC: 2 | RNVC: 2
5.12.5111.3633.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-312-2075
Mending Plate

123122075
326-28011-6001: RNCC: 3 | RNVC: 2

3 Dec 1987

5340-12-308-2433
Mending Plate

123082433
0A846.92-01-20-00-003: RNCC: 3 | RNVC: 2

18 Sep 1986

5340-12-365-7583
Mending Plate

123657583
5161-233100B01B: RNCC: 2 | RNVC: 2
5161-233100B01B: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-186-9313
Strap Bolt

121869313
431271222650: RNCC: 3 | RNVC: 2
43127122265: RNCC: 5 | RNVC: 2
5801796-120000-01: RNCC: 5 | RNVC: 9
5801796-120000.01: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-12-356-0082
Access Cover

123560082
10088: RNCC: 3 | RNVC: 2
10088: RNCC: 5 | RNVC: 2

14 Jan 2002

5340-12-392-7183
Angle Bracket

123927183
L716M5806207: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-12-338-1932
Access Cover

123381932
0730 361 055: RNCC: 3 | RNVC: 2
0730361055: RNCC: 5 | RNVC: 2

1 Jun 1995

5340-12-382-6331
Expansion Plug

123826331
000443024002: RNCC: 3 | RNVC: 2

19 Jul 2010

5340-12-371-5056
Mounting Bracket

123715056
13404: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-12-393-8531
Mounting Bracket

123938531
M5537360720200: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-381-8037
Antipilferage Seal

123818037
JG740: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-12-345-8951
Threaded Rod End

123458951
TA3006P007: RNCC: 3 | RNVC: 2

13 May 1998

5340-12-351-2387
Mounting Plate

123512387
T672M1035209: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-12-392-8020
Extension Handle

123928020
L135M2902213: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-12-136-1071
Expansion Plug

121361071
6369971025: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-164-1256
Compression Cup

121641256
D192: RNCC: 3 | RNVC: 2
D 192: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-6624
Casement Fastener

123686624
4617500084: RNCC: 3 | RNVC: 2

4 Apr 2006

5340-12-194-8704
Lock-Release Lever

121948704
6002332: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-12-352-0398
Access Cover

123520398
2378-430000A00C: RNCC: 3 | RNVC: 2

9 Oct 2000

5340-12-307-2441
Lock-Release Lever

123072441
RP988882: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-369-0068
Mounting Bracket

123690068
2045-252000B02B: RNCC: 3 | RNVC: 2

11 May 2006

5340-12-183-5575
Double Angle Bracket

121835575
CF 406 699: RNCC: 2 | RNVC: 2
CF 406 699: RNCC: 3 | RNVC: 2
CF406699: RNCC: 5 | RNVC: 2
CF 406 699: RNCC: 5 | RNVC: 2
CF406699: RNCC: 5 | RNVC: 2
CF 406 699: RNCC: 5 | RNVC: 2
CF406699: RNCC: 5 | RNVC: 2

29 Apr 1980

5340-12-316-9141
Helical Compression Spring Seat

123169141
2420328033: RNCC: 3 | RNVC: 2
2420328033: RNCC: 5 | RNVC: 2
5000808630: RNCC: 5 | RNVC: 2
0128 8570: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-12-318-5576
Mending Plate

123185576
0414 3322: RNCC: 3 | RNVC: 2
04143322EE0148.40: RNCC: 5 | RNVC: 2
4079930: RNCC: 5 | RNVC: 2

26 Jul 1989

5340-12-352-6054
Dust And Moisture Seal Protective Plug

123526054
260Q8080: RNCC: 3 | RNVC: 2
GPN260Q8080: RNCC: 5 | RNVC: 2
106454: RNCC: 5 | RNVC: 2

29 Nov 2000

5340-12-302-7864
Nonmetallic Bumper

123027864
CF 493 237 A: RNCC: 3 | RNVC: 2
CF 493 237 A: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-311-9477
Mounting Bracket

123119477
2300074-5532.00: RNCC: 2 | RNVC: 2
2300074-5532.00: RNCC: 3 | RNVC: 2
2300074-5532.00: RNCC: 5 | RNVC: 9

3 Nov 1987

5340-12-701-6000
Loop Clamp

127016000
VG95211-ML-127016000: RNCC: 2 | RNVC: 2
5.12.6501.8180.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-336-4152
Angle Bracket

123364152
6100146-105000.009.0: RNCC: 2 | RNVC: 2
6100146-105000.009.0: RNCC: 3 | RNVC: 2
6100146-105000.009.0: RNCC: 5 | RNVC: 2

14 Nov 1994

5340-12-312-6759
Access Door

123126759
42529/1022: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-12-305-4436
Loop Clamp

123054436
WN 414 25-160-ST: RNCC: 3 | RNVC: 2
WN41425-160-ST: RNCC: 5 | RNVC: 9
0685160: RNCC: 5 | RNVC: 9
WN 414 25-160-ST: RNCC: 5 | RNVC: 9

7 Nov 1985

5340-12-188-2632
Platte

121882632
4312 712 25970: RNCC: 3 | RNVC: 2
431271225970: RNCC: 5 | RNVC: 2
5801685-124000-03: RNCC: 5 | RNVC: 9
5801685-124000.03: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-164-5784
Retaining Clip

121645784
5800828-1471-007: RNCC: 3 | RNVC: 2
C42334-A228-C2: RNCC: 5 | RNVC: 2
C42334A228C2: RNCC: 5 | RNVC: 2
5800828-1471.007: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-303-5827
Angle Bracket

123035827
A-295133-003: RNCC: 3 | RNVC: 2
A295133-003: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-301-1646
Angle Bracket

123011646
A-243799-031: RNCC: 3 | RNVC: 2
A243799-031: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-374-8537
Mending Plate

123748537
SK976-194220.004.0: RNCC: 3 | RNVC: 2
1300756: RNCC: 5 | RNVC: 9

31 Mar 2008

5340-12-381-2941
Mending Plate

123812941
424-06-AD1: RNCC: 3 | RNVC: 2
4250473100820: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-342-8797
Mounting Plate

123428797
D0322-0000-0001: RNCC: 3 | RNVC: 2
260428: RNCC: 5 | RNVC: 2

11 Apr 1997

5340-12-363-1916
Nonmetallic Bumper

123631916
J0413020H113-003A0-008: RNCC: 3 | RNVC: 2

12 May 2004

5340-12-358-9373
Helical Compression Spring Retainer

123589373
E3-2029020: RNCC: 3 | RNVC: 2

2 Dec 2002

5340-12-172-9530
Access Cover

121729530
14021-15003-06: RNCC: 3 | RNVC: 2
893620: RNCC: 5 | RNVC: 2
14021-15003-06: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-358-8729
Double Angle Bracket

123588729
24.18.27: RNCC: 3 | RNVC: 2
24-18-27: RNCC: 5 | RNVC: 2

25 Nov 2002

5340-12-195-4649
Lock-Release Lever

121954649
52.1405.135.01: RNCC: 3 | RNVC: 2
52-1405-135-01: RNCC: 5 | RNVC: 2

1 Mar 1983

5340-12-199-8292
Access Cover

121998292
536116-8005: RNCC: 2 | RNVC: 2
536116-8005: RNCC: 3 | RNVC: 2
536116-8005: RNCC: 5 | RNVC: 9
536116-8005.000: RNCC: 5 | RNVC: 9
536116-8005: RNCC: 5 | RNVC: 9
536116-8005.000: RNCC: 5 | RNVC: 9

2 Jun 1984

5340-12-388-3791
Threaded Rod End

123883791
160-104057: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-12-301-8894
Double Angle Bracket

123018894
20-5220-172: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-702-2185
Mounting Bracket

127022185
VG95211-ML-127022185: RNCC: 2 | RNVC: 2
30.7225.53: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-326-5782
Mounting Plate

123265782
63038-001: RNCC: 3 | RNVC: 2
63 038-001: RNCC: 5 | RNVC: 9

9 Oct 1991

5340-12-328-0676
Angle Bracket

123280676
2805100932: RNCC: 3 | RNVC: 2
805-10-66-02-01: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-12-393-6816
Mounting Bracket

123936816
11.29251-0033: RNCC: 3 | RNVC: 2
11.29251-0033: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-361-9492
Block Clamp

123619492
117-80157.05: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-12-301-6380
Access Cover

123016380
43712170-601: RNCC: 2 | RNVC: 2
43712170-601: RNCC: 3 | RNVC: 2
43712170-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-179-2716
Webbing Strap

121792716
183871223A: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-180-4703
Catch Strike

121804703
3817250019: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-319-5458
Mending Plate

123195458
504296: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-358-5476
Mounting Bracket

123585476
5411540145: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-356-0919
Nut And Bolt Locking Plate

123560919
4638811514: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-197-6177
Butt Hinge Leaf

121976177
50031182: RNCC: 3 | RNVC: 2

8 Nov 1983

5340-12-199-3699
Webbing Strap

121993699
707223-8011.000: RNCC: 3 | RNVC: 2

17 Apr 1984

5340-12-182-1328
Mounting Bracket

121821328
4213530540: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-172-6151
Retaining Clip

121726151
021101487: RNCC: 3 | RNVC: 2

31 Jan 1978

5340-12-350-1477
Butt Hinge Leaf

123501477
LN9172KF345: RNCC: 2 | RNVC: 2

21 Feb 2000

5340-12-377-3912
Spring Tension Clip

123773912
0009949245: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-383-3788
Spring Tension Clip

123833788
M1509A: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-12-330-3030
Spring Tension Clip

123303030
6738260314: RNCC: 3 | RNVC: 2

28 Nov 1992

5340-12-176-5850

5340-12-360-5986
Bow Handle

123605986
BD5.100.134.570: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-12-336-2841
Access Cover

123362841
4620 335 078: RNCC: 3 | RNVC: 2
4620335078: RNCC: 5 | RNVC: 2

7 Nov 1994

5340-12-372-4910
Door Button

123724910
10019722: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-190-8064
Access Cover

121908064
23111-3838.01: RNCC: 2 | RNVC: 2
23111-3838.01: RNCC: 5 | RNVC: 2
1091685: RNCC: 5 | RNVC: 9
23111-3838.01: RNCC: 5 | RNVC: 9
23111-3838.01: RNCC: 5 | RNVC: 9

15 Dec 1981

5340-12-325-3643
Filler Opening Cap

123253643
965451900: RNCC: 3 | RNVC: 2

29 May 1991

5340-12-380-2362
Dust And Moisture Seal Protective Cap

123802362
S281M8084205: RNCC: 3 | RNVC: 2

8 Oct 2009

5340-12-024-6377

5340-12-388-8471
Access Cover

123888471
61.132.11.000: RNCC: 3 | RNVC: 2
0002062803: RNCC: 5 | RNVC: 2

27 Apr 2012

5340-12-300-5195
Loop Clamp

123005195
625S: RNCC: 3 | RNVC: 2
ZT0625S: RNCC: 5 | RNVC: 2
ZT625S: RNCC: 5 | RNVC: 2
12H4108: RNCC: 5 | RNVC: 2

9 Aug 1984

5340-12-391-3556
Buckle

123913556
M1C001: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-305-9322
Angle Bracket

123059322
4064202286: RNCC: 3 | RNVC: 2

9 Jan 1986

5340-12-191-1351
Metal Runner

121911351
CF 442 570: RNCC: 3 | RNVC: 2
CF442570: RNCC: 5 | RNVC: 2
CF 442 57A: RNCC: 5 | RNVC: 2
CF442570: RNCC: 5 | RNVC: 2
CF442570A: RNCC: 5 | RNVC: 2
CF 442 570: RNCC: 5 | RNVC: 2

14 Jan 1982

5340-12-364-5727
Angle Bracket

123645727
T257M2206205: RNCC: 2 | RNVC: 2
T257M2206205: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-12-366-0133
Mounting Bracket

123660133
9436110431: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-176-8480
Dust And Moisture Seal Protective Plug

121768480
31422000381: RNCC: 3 | RNVC: 9

20 Dec 1978

5340-12-179-9827
Webbing Strap

121799827
3818900494: RNCC: 3 | RNVC: 2

14 Aug 1979

5340-12-354-8243
Dust And Moisture Seal Protective Plug

123548243
300V12: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-313-1122
Bow Handle

123131122
654.6019.02: RNCC: 3 | RNVC: 2

4 Mar 1988

5340-12-337-9620
Clamping Catch

123379620
101.102115: RNCC: 3 | RNVC: 2
620: RNCC: 5 | RNVC: 9
10.2115: RNCC: 5 | RNVC: 9

5 May 1995

5340-12-175-4555
Dust And Moisture Seal Protective Plug

121754555
01TC30920: RNCC: 3 | RNVC: 2

19 Sep 1978

5340-12-360-6040
Seal Retaining Plate

123606040
NN31407P01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-12-319-4969
Mounting Bracket

123194969
702.1CG: RNCC: 3 | RNVC: 2
702.1C: RNCC: 5 | RNVC: 2
702.1CG: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-197-2060
Angle Bracket

121972060
4355450840: RNCC: 3 | RNVC: 2

29 Sep 1983

5340-12-179-7758
Webbing Strap

121797758
4258600394: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-343-3368
Shimmy Damper

123433368
55.2502.107.33: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-12-183-7226
Loop Clamp

121837226
PAN4231GGG6626: RNCC: 3 | RNVC: 2

15 May 1980

5340-12-321-0801
Angle Bracket

123210801
5803606-611000.02: RNCC: 2 | RNVC: 2
5803606-611000.02: RNCC: 5 | RNVC: 9

26 Mar 1990

5340-12-301-2402
Clamping Catch

123012402
4178777: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-135-9982

5340-12-390-8440
Spacing Threaded Standoff

123908440
565655059: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-12-379-6632
Spring Loaded Cylinder Fastener

123796632
03089-5105: RNCC: 3 | RNVC: 2

20 Aug 2009

5340-12-301-2389
Mending Plate

123012389
4178085: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-092-0963

Load More Results