What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 60 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 60 of 178

5340-12-316-7260
Mounting Bracket

123167260
42205265: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-323-3051
Angle Bracket

123233051
02491599: RNCC: 3 | RNVC: 2
2491599EE50-3449: RNCC: 5 | RNVC: 2

13 Nov 1990

5340-12-183-0522
Angle Bracket

121830522
42005716: RNCC: 3 | RNVC: 2
42005716ED5052-81: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-311-3759
Butt Hinge Leaf

123113759
2300227-342220.000: RNCC: 2 | RNVC: 2
2300227-342220.000: RNCC: 3 | RNVC: 2
2300227-342220.000: RNCC: 5 | RNVC: 9

25 Aug 1987

5340-12-198-1174
Flush Lock

121981174
171837019: RNCC: 3 | RNVC: 9

21 Dec 1983

5340-12-193-9555
Pipe Bracket

121939555
160-714026: RNCC: 3 | RNVC: 2
160-714026: RNCC: 5 | RNVC: 2
160-714026: RNCC: 5 | RNVC: 9

20 Sep 1982

5340-12-321-9336
Helical Compression Spring Seat

123219336
1480551065: RNCC: 3 | RNVC: 2
1480551065: RNCC: 5 | RNVC: 2
1480551065: RNCC: 5 | RNVC: 9

10 Jul 1990

5340-12-321-9178
Retaining Strap

123219178
BMAB006: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-344-0423
Lock-Release Lever

123440423
2996.73.70: RNCC: 3 | RNVC: 2
2996.7370: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-167-8847
Escutcheon Plate

121678847
5800181: RNCC: 3 | RNVC: 2
39318: RNCC: 5 | RNVC: 2
4700017: RNCC: 5 | RNVC: 2
972725001: RNCC: 5 | RNVC: 9
972725001: RNCC: 5 | RNVC: 9

31 Jan 1977

5340-12-158-6805

5340-12-164-9175
Spring Tension Clip

121649175
681-23000-03: RNCC: 3 | RNVC: 2
681-23000-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-3347
Turnbuckle Body

121653347
41422-31: RNCC: 3 | RNVC: 2

9 Apr 1976

5340-12-189-0324
Folding Stay

121890324
NO PRIMARY REF 12-189-0324: RNCC: 3 | RNVC: 2
ART.1652-LINKS-MS-VERCHROMT: RNCC: 5 | RNVC: 9
301-MS-VERCHROMT-LINKS: RNCC: 5 | RNVC: 9

19 Aug 1981

5340-12-163-8995
Air Inlet-Outlet Frame

121638995
5M6892-220-07: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-163-0010
Retaining Strap

121630010
VG95933ER-55-W1-BK: RNCC: 2 | RNVC: 2
1/2D55MMN325: RNCC: 3 | RNVC: 2
MMN325-1-2D9-55: RNCC: 5 | RNVC: 2
MMN325-1-2D9-55: RNCC: 5 | RNVC: 2
1-2D55MMN325: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-387-8910
Manual Control Lever

123878910
P-68-06+P-65.22: RNCC: 3 | RNVC: 2
19 00 186 FIG.1-35/5: RNCC: 5 | RNVC: 2

7 Feb 2012

5340-12-179-5769
Spring Tension Clip

121795769
0009888478: RNCC: 3 | RNVC: 2

9 Jul 1979

5340-12-330-1218
Angle Bracket

123301218
10459202: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-12-198-2425
Bridge Clamp

121982425
66.3851.530.04-A001: RNCC: 3 | RNVC: 2
161796: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-301-3862
Double Angle Bracket

123013862
8 5035 1080: RNCC: 3 | RNVC: 2

11 Oct 1984

5340-12-327-7892
Mending Plate

123277892
R-4-26344: RNCC: 3 | RNVC: 2
R-1-26337REP13: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-12-361-4708
Mounting Bracket

123614708
2500262-748000.003.0: RNCC: 2 | RNVC: 2
2500262-748000.003.0: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-310-2735
Nonmetallic Bumper

123102735
330496: RNCC: 3 | RNVC: 2
3-V7277: RNCC: 5 | RNVC: 2

30 Apr 1987

5340-12-385-7965
Sliding Door Track

123857965
2500262-531000.002.0: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-12-392-2038
Cushioning Pad

123922038
DF 402 810 A: RNCC: 3 | RNVC: 2

15 May 2013

5340-12-392-4725
Dust And Moisture Seal Protective Cap

123924725
3316889: RNCC: 3 | RNVC: 2
03316889: RNCC: 5 | RNVC: 2

12 Jun 2013

5340-12-302-0828
Double Angle Bracket

123020828
3852681640: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-309-2812
Access Cover

123092812
6108801: RNCC: 3 | RNVC: 2

9 Jan 1987

5340-12-311-3874
Mounting Bracket

123113874
78203 41504: RNCC: 2 | RNVC: 2
7820341504: RNCC: 3 | RNVC: 2
78203 41504: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-12-348-6559
Mounting Plate

123486559
0423 1920: RNCC: 3 | RNVC: 2
0423 1920ED0150-19: RNCC: 5 | RNVC: 2

29 Jul 1999

5340-12-320-1407
Butt Hinge

123201407
CF 832 322 AE: RNCC: 2 | RNVC: 2
CF 832 322 AE: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-339-1263
Angle Bracket

123391263
3660183940: RNCC: 3 | RNVC: 2

12 Oct 1995

5340-12-301-9952
Bow Handle

123019952
3148150436: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-322-3584
Butt Hinge

123223584
100013881: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-309-7929
Access Cover

123097929
6131618: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-316-8272
Mounting Bracket

123168272
2300279-9730.09: RNCC: 2 | RNVC: 2
2300279-9730.09: RNCC: 3 | RNVC: 2
9871628: RNCC: 5 | RNVC: 9
2300279-9730.09: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-189-2982
Access Cover

121892982
02424 61 102: RNCC: 3 | RNVC: 2
002424 61 102: RNCC: 5 | RNVC: 2
00242461102: RNCC: 5 | RNVC: 2

16 Sep 1981

5340-12-314-2219
Detent Plunger

123142219
1200096-15B800012: RNCC: 2 | RNVC: 2

17 Jun 1988

5340-12-322-6131
Access Door

123226131
10 0021 031: RNCC: 2 | RNVC: 2
10 0021 031: RNCC: 3 | RNVC: 2

6 Sep 1990

5340-12-341-2379
Plug Button

123412379
43127130565: RNCC: 3 | RNVC: 9
4312 713 0565: RNCC: 5 | RNVC: 9

13 Aug 1996

5340-12-360-0765
Mounting Bracket

123600765
9418200414: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-348-9515
Mounting Bracket

123489515
530813-8011.000: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-12-188-2961
Nonmetallic Bumper

121882961
2538: RNCC: 3 | RNVC: 2

25 Jun 1981

5340-12-135-6653

5340-12-357-2690
Dust And Moisture Seal Protective Cap

123572690
45757-20: RNCC: 3 | RNVC: 2
0005332831: RNCC: 5 | RNVC: 2

28 May 2002

5340-12-334-6714
Access Cover

123346714
J230ZZ2E001-000: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-12-700-8685
Loop Clamp

127008685
VG95211-ML-127008685: RNCC: 2 | RNVC: 2
155N464-277: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-7683
Turnbuckle

123077683
DIN82004-D4-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-D4-VERZINKT: RNCC: 3 | RNVC: 2
D4DIN82004VERZINKT: RNCC: 5 | RNVC: 2

24 Jul 1986

5340-12-702-9201
Rod End Connector

127029201
VG95211-ML-127029201: RNCC: 2 | RNVC: 2
5.12.5111.6760.03: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-145-3364
Retaining Strap

121453364
X11-11APL15-2: RNCC: 3 | RNVC: 2
10300206: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-3578
Expansion Plug

121783578
DIN470-18-ST-A2C: RNCC: 2 | RNVC: 2
18DIN470-ST-A2C: RNCC: 5 | RNVC: 2
18DIN470A2C: RNCC: 5 | RNVC: 2
18DIN470GALZN5C: RNCC: 5 | RNVC: 2
18DIN470STA2C: RNCC: 5 | RNVC: 2
18DIN470STGALZN5C: RNCC: 5 | RNVC: 2

17 Apr 1979

5340-12-701-8409
Loop Clamp

127018409
VG95211-ML-127018409: RNCC: 2 | RNVC: 2
5148A-10: RNCC: 3 | RNVC: 2
0500840244499: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-702-1797
Mounting Bracket

127021797
VG95211-ML-127021797: RNCC: 2 | RNVC: 2
30.7204.1085: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-2176
Mounting Bracket

123402176
9895467: RNCC: 3 | RNVC: 9
463-151911.000: RNCC: 5 | RNVC: 9

15 Mar 1996

5340-12-196-1890
Door Closer

121961890
409-039580: RNCC: 3 | RNVC: 2
409-039580: RNCC: 5 | RNVC: 9

9 Jun 1983

5340-12-357-1340
Mechanic Equipment Hardware Kit

123571340
1120-70074.01: RNCC: 3 | RNVC: 2

8 May 2002

5340-12-091-2526

5340-12-312-3438
Angle Bracket

123123438
100000839: RNCC: 2 | RNVC: 2
100000839: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-12-316-6747
Double Angle Bracket

123166747
5800777-8621.02: RNCC: 2 | RNVC: 2
5800777-8621.02: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-340-9897
Mounting Plate

123409897
20-5120-619: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-12-152-2740

5340-12-326-4372
Plug Button

123264372
6202680557: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-358-9758
Clamping Catch

123589758
273366: RNCC: 3 | RNVC: 2
0007950273: RNCC: 5 | RNVC: 2

4 Dec 2002

5340-12-362-3073
Loop Clamp

123623073
LN9490BK35: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-091-8676

5340-12-341-6262
Bridge Clamp

123416262
609510060: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-12-336-1782
Spring Tension Clip

123361782
4620 306 248: RNCC: 3 | RNVC: 2
4620306248: RNCC: 5 | RNVC: 2
9398069: RNCC: 5 | RNVC: 2
8781459: RNCC: 5 | RNVC: 2
4620306248: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-12-199-5776
Nonmetallic Bumper

121995776
295511413: RNCC: 3 | RNVC: 2

15 May 1984

5340-12-139-3977
Loop Clamp

121393977
1671312007: RNCC: 3 | RNVC: 2
WBE50Z8X: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-340-7163
Metallic Bumper

123407163
000 51 270: RNCC: 3 | RNVC: 2
00051270: RNCC: 5 | RNVC: 2

30 May 1996

5340-12-385-4711
Double Angle Bracket

123854711
5841751241: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-357-3761
Federkraft- Klipp

5340-12-043-2722

5340-12-152-8893
Retaining Strap

121528893
23114-5719.00: RNCC: 2 | RNVC: 2
23114-5719-00: RNCC: 3 | RNVC: 2
1123373: RNCC: 5 | RNVC: 9
23114-5719-00: RNCC: 5 | RNVC: 9
23114-5719-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-8586
Dust And Moisture Seal Protective Plug

123758586
350-I42: RNCC: 3 | RNVC: 2
GPN350-I42: RNCC: 5 | RNVC: 2

14 Jul 2008

5340-12-196-5544
Expansion Plug

121965544
81364100010: RNCC: 3 | RNVC: 2
81.36410.0010: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-168-0319
Helical Compression Spring Seat

121680319
6.4215-0005.1: RNCC: 3 | RNVC: 2
6-4215-0005-1: RNCC: 5 | RNVC: 2

9 Feb 1977

5340-12-183-1042
Mending Plate

121831042
42005922: RNCC: 3 | RNVC: 2
42005922EZ5054-80: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-380-5353
Dust And Moisture Seal Boot

123805353
0005598070: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-315-8014
Mounting Bracket

123158014
13.4.751D: RNCC: 3 | RNVC: 2

26 Nov 1988

5340-12-324-2044
Mounting Bracket

123242044
54.2544.302.31: RNCC: 2 | RNVC: 2
54.2544.302.31: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-12-358-1430
Roller Holder

123581430
BFAB003: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-359-7241
Manual Control Lever

123597241
6410.230.041.003: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-359-6048
Dust And Moisture Seal Protective Cap

123596048
9452610533: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-375-1812
Access Cover

123751812
L311M3820101: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-12-331-6168

5340-12-307-2370
Dust And Moisture Seal Protective Cap

123072370
992 198 001: RNCC: 3 | RNVC: 2

23 May 1986

5340-12-358-1839
Dust And Moisture Seal Boot

123581839
1119970181: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-305-3125
Escutcheon Plate

123053125
4067660005: RNCC: 3 | RNVC: 2
60017517500: RNCC: 5 | RNVC: 2

21 Oct 1985

5340-12-353-8735
Mounting Bracket

123538735
0182779C01: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-360-1535
Angle Bracket

123601535
9425061540: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-304-9738
Lock-Release Lever

123049738
3149100224: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-12-188-3058
Strap Bolt

121883058
53.1103.308-00: RNCC: 3 | RNVC: 2
53-1103-308-00: RNCC: 5 | RNVC: 2

29 Jun 1981

5340-12-302-4689
Flush Lock

123024689
4152-616: RNCC: 3 | RNVC: 2
4152-616: RNCC: 5 | RNVC: 2
4152616: RNCC: 5 | RNVC: 2
166-2451: RNCC: 5 | RNVC: 2
166-2451: RNCC: 5 | RNVC: 9
4152-616: RNCC: 5 | RNVC: 9

3 Jan 1985

5340-12-197-6602
Electrical-Mechanical Equipment Post

121976602
2562-41.2: RNCC: 3 | RNVC: 2
2562-41-2: RNCC: 5 | RNVC: 9
2562-41.2: RNCC: 5 | RNVC: 9

14 Nov 1983

5340-12-183-5225
Electrical-Mechanical Equipment Post

121835225
C200ZZ30002-000: RNCC: 3 | RNVC: 2

24 Apr 1980

5340-12-025-4534

5340-12-358-8903
Double Angle Bracket

123588903
3521871640: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-386-6266
Bumper

123866266
TYP B25X15 M6X18: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-12-313-6049
Angle Bracket

123136049
2300013-6508.02: RNCC: 2 | RNVC: 2
2300013-6508.02: RNCC: 3 | RNVC: 2
2300013-6508.02: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-12-360-1281
Double Angle Bracket

123601281
9418857914: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-370-8664
Loop Clamp

123708664
3094923441: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-12-378-3952
Clamping Catch

123783952
0000596597: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-366-2964
Spacing Threaded Standoff

123662964
105124: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-369-1464
Verriegelun Buegel

123691464
10.1230: RNCC: 3 | RNVC: 2

30 May 2006

5340-12-370-7852
Nonmetallic Bumper

123707852
312223: RNCC: 3 | RNVC: 2
90216299: RNCC: 5 | RNVC: 2
90216298: RNCC: 5 | RNVC: 2

20 Dec 2006

5340-12-365-7356
Mechanic Equipment Hardware Kit

123657356
9438100814: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-12-331-8966
Spacing Threaded Standoff

123318966
6821201: RNCC: 3 | RNVC: 2
682.1201: RNCC: 5 | RNVC: 2

2 Jul 1993

5340-12-358-2487
Helical Compression Spring Seat

123582487
4420160026: RNCC: 3 | RNVC: 2
15010419: RNCC: 5 | RNVC: 2

1 Oct 2002

5340-12-364-1604
Butt Hinge

123641604
1056-U35: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-394-5373
Runner

123945373
4052063132767: RNCC: 3 | RNVC: 2
I012748: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-011-6141

5340-12-342-8705
Strap Hinge

123428705
1217-472: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-12-316-7575
Kunst Gleitschiene

123167575
5800777-8300.01: RNCC: 2 | RNVC: 2
5800777-8300.01: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-317-7323
Mounting Bracket

123177323
3641201: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-182-9997
Handle Grip

121829997
0012233: RNCC: 3 | RNVC: 2
12233-43544: RNCC: 5 | RNVC: 2

13 Mar 1980

5340-12-323-1838
Multiple Angle Bracket

123231838
42333882: RNCC: 3 | RNVC: 2
42333882EE56-0244: RNCC: 5 | RNVC: 2

30 Oct 1990

5340-12-136-8247
Expansion Plug

121368247
DIN470-34-ST-PHR: RNCC: 2 | RNVC: 2
000470034000: RNCC: 5 | RNVC: 2
000470034001: RNCC: 5 | RNVC: 2
34DIN470PHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-4727
Retaining Strap

123204727
33019-002-003: RNCC: 3 | RNVC: 2
33019-02-03: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-190-0443
Retaining Strap

121900443
F1143386-0049: RNCC: 3 | RNVC: 2
F11.43386-0049: RNCC: 5 | RNVC: 2
F11.43386-0049: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-359-8334
Mounting Bracket

123598334
2500261-182600.008.0: RNCC: 2 | RNVC: 2
2500261-182600.008.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-359-4370
Loop Clamp

123594370
DIN3016-1-E1-34X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-362-0088
Loop Clamp

123620088
DIN3016-1-E2-15-15X15-W1-2-NBR: RNCC: 2 | RNVC: 2

16 Dec 2003

5340-12-342-6188
Mounting Bracket

123426188
0001-162010-000-0: RNCC: 3 | RNVC: 2
0001-162010-000-0: RNCC: 5 | RNVC: 9

7 Mar 1997

5340-12-322-3953
Angle Bracket

123223953
7068-81100-000-2: RNCC: 3 | RNVC: 2

17 Aug 1990

5340-12-198-4343
Angle Bracket

121984343
5802111-3000.01: RNCC: 2 | RNVC: 2
2500135-060000.001.0: RNCC: 3 | RNVC: 2
7802082301: RNCC: 3 | RNVC: 2
5802111-3000.01: RNCC: 5 | RNVC: 2
2500135-060000.001.0: RNCC: 5 | RNVC: 2
5802111-3000.01: RNCC: 5 | RNVC: 9
78020 82301: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-12-383-7309
Bow Handle

123837309
GN565.1-26-132-SW: RNCC: 3 | RNVC: 2

1 Dec 2010

5340-12-376-6900
Nut And Bolt Locking Plate

123766900
063935: RNCC: 3 | RNVC: 2

29 Oct 2008

5340-12-365-7116
Access Cover

123657116
1615500291: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-368-6825
Retaining Strap

123686825
306795: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-12-392-3317
Mounting Plate

123923317
125.131658: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-301-7715
Metal Runner

123017715
2300107-310511: RNCC: 2 | RNVC: 2
2300107-310511: RNCC: 3 | RNVC: 2
2300107-310511: RNCC: 5 | RNVC: 9
2300107-310511: RNCC: 5 | RNVC: 9

8 Nov 1984

5340-12-180-3175
Dust And Moisture Seal Protective Plug

121803175
433881637A01Z: RNCC: 3 | RNVC: 2
53362: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-143-2694
Butt Hinge Leaf

121432694
RELAPS342T21: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-338-6395
Angle Bracket

123386395
2803789: RNCC: 3 | RNVC: 2

8 Aug 1995

5340-12-041-0390

5340-12-383-9265
Mechanical Stop

123839265
931133040000: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-12-337-1399
Spacing Threaded Standoff

123371399
52.0271.390.05: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-12-365-9674
Loop Clamp

123659674
3647A006: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-12-382-4336
Rod End Clevis

123824336
06360610163: RNCC: 3 | RNVC: 2
06.36061.0163: RNCC: 5 | RNVC: 2

21 Jun 2010

5340-12-384-8723
Retaining Strap

123848723
208062: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-134-0947
Stift

121340947
5167-27-06-531: RNCC: 3 | RNVC: 2
5167-27-06.531: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-131-0512
Stift

121310512
8402180: RNCC: 3 | RNVC: 2
0029-855: RNCC: 5 | RNVC: 2
0029855: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-1401
Helical Compression Spring Retainer

123201401
4507-3530.04N: RNCC: 3 | RNVC: 2
4507-3530-04: RNCC: 5 | RNVC: 9

11 Dec 1989

5340-12-346-4351
Retaining Strap

123464351
88974010004: RNCC: 3 | RNVC: 2

27 Jul 1998

5340-12-390-6384
Dust And Moisture Seal Protective Cap

123906384
7125270: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-12-358-9231
Double Angle Bracket

123589231
3854280140: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-312-1334
Flush Lock

123121334
251905855A: RNCC: 3 | RNVC: 2
81.97100.6072: RNCC: 5 | RNVC: 2
81971006072: RNCC: 5 | RNVC: 2

25 Nov 1987

5340-12-301-7730
Detent Plunger

123017730
1172650474: RNCC: 3 | RNVC: 2

8 Nov 1984

5340-12-323-9438
Mending Plate

123239438
160.32.0008: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-320-7714
Manual Control Handle

123207714
A9NAN2256: RNCC: 3 | RNVC: 2

15 Feb 1990

5340-12-350-0102
Mending Plate

123500102
54.1038.180.02: RNCC: 2 | RNVC: 2
54.1038.180.02: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-374-3189
Mending Plate

123743189
L183M0003208: RNCC: 3 | RNVC: 2

7 Feb 2008

5340-12-389-0906
Expansion Shield

123890906
061130: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-391-4307
Access Cover

123914307
I006008TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-361-5097
Loop Clamp

123615097
1218 7759: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-12-091-3388

5340-12-360-0973
Spring Tension Clip

123600973
9419880578: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-305-3683
Electrical-Mechanical Equipment Post

123053683
272.315 328: RNCC: 2 | RNVC: 2
272.315.328: RNCC: 3 | RNVC: 2
272.315 328: RNCC: 5 | RNVC: 9

28 Oct 1985

5340-12-377-8423
Ball Stud Holder

123778423
4603000240: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-12-316-5510
Spring Holder

123165510
5183804: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-12-041-2985

5340-12-090-5043

5340-12-022-0852

5340-12-174-4583
Quick Release Plunger

121744583
500903: RNCC: 3 | RNVC: 2

29 Jun 1978

5340-12-186-5109
Spring Tension Clip

121865109
00560110: RNCC: 3 | RNVC: 2
15406001: RNCC: 5 | RNVC: 2
15406001: RNCC: 5 | RNVC: 9

12 Jan 1981

5340-12-163-9480
Nonmetallic Bumper

121639480
330822096: RNCC: 3 | RNVC: 2
330822096: RNCC: 3 | RNVC: 2
22096: RNCC: 5 | RNVC: 2
330822096: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-346-0175
Mounting Bracket

123460175
2300061-291211.000: RNCC: 2 | RNVC: 2
2300061-291211.000: RNCC: 3 | RNVC: 2
2300061-291211.000: RNCC: 5 | RNVC: 9
9908150: RNCC: 5 | RNVC: 9

29 May 1998

5340-12-344-4873
Retaining Strap

123444873
78027 61065: RNCC: 2 | RNVC: 2
7802761065: RNCC: 3 | RNVC: 2
78027 61065: RNCC: 5 | RNVC: 9

3 Nov 1997

5340-12-345-8740
Mounting Bracket

123458740
52.0285.145.01: RNCC: 3 | RNVC: 2

8 May 1998

5340-12-367-2624
Headless Grooved Rod

123672624
0986611252: RNCC: 3 | RNVC: 2

26 Jul 2005

5340-12-197-4504
Metal Runner

121974504
30819-312: RNCC: 3 | RNVC: 2
30819-312: RNCC: 5 | RNVC: 2

24 Oct 1983

5340-12-319-3313
Nonmetallic Solid Wheel

123193313
1700013-20300.01: RNCC: 2 | RNVC: 2
297161: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-171-9804
Loop Clamp

121719804
4638 305 030: RNCC: 3 | RNVC: 2
4638 305 030: RNCC: 5 | RNVC: 2
4638305030: RNCC: 5 | RNVC: 9

5 Dec 1977

5340-12-352-7116
Catch Strike

123527116
T521M0201214: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-319-4572
Angle Bracket

123194572
105-45401.13: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-12-319-4150
Access Cover

123194150
5802006-622100.01: RNCC: 2 | RNVC: 2
5802006-622100.01: RNCC: 3 | RNVC: 2

29 Sep 1989

5340-12-198-1998
Angle Bracket

121981998
6065401: RNCC: 3 | RNVC: 2

29 Dec 1983

5340-12-345-2696
Spacing Threaded Standoff

123452696
52.2009.905.03: RNCC: 3 | RNVC: 2

20 Feb 1998

5340-12-363-5200
Retaining Strap

123635200
T214M1002102: RNCC: 2 | RNVC: 2
T214M1002102: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-363-9901
Section Block Clamp

123639901
04186663: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-040-1266

5340-12-156-3553

5340-12-094-1051

5340-12-349-5861
Access Cover

123495861
U60.281000.07-00: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-701-5082
Line Supporting Strap

127015082
VG95211-ML-127015082: RNCC: 2 | RNVC: 2
5.12.5850.8160.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-366-6991
Manual Control Handle

123666991
6-30-MAB-03.01: RNCC: 3 | RNVC: 2

25 May 2005

5340-12-321-9415
Mending Plate

123219415
702-141300-959-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-328-9151
Access Cover

123289151
2350-021110.000.0: RNCC: 2 | RNVC: 2
2350-021110.000.0: RNCC: 3 | RNVC: 2
2350-021110.000.0: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-307-3333
Bow Handle

123073333
FT6100129-022: RNCC: 2 | RNVC: 2
1095-05: RNCC: 3 | RNVC: 2
0.65.0045.4: RNCC: 3 | RNVC: 2
213-0201: RNCC: 3 | RNVC: 2
3773009: RNCC: 5 | RNVC: 2

5 Jun 1986

5340-12-317-2806
Access Hole Frame

123172806
S35261-01-6-229: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-12-176-3625
Webbing Strap

121763625
81968024027: RNCC: 3 | RNVC: 2
23230-183605.000.0: RNCC: 5 | RNVC: 9
23230-183605-000-0: RNCC: 5 | RNVC: 9
23230-183605.000.0: RNCC: 5 | RNVC: 9

27 Nov 1978

5340-12-349-6080
Retaining Strap

123496080
160-77870-01: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-333-3245
Nonmetallic Bumper

123333245
00098348340: RNCC: 3 | RNVC: 9
328-180121.002: RNCC: 5 | RNVC: 9
9834834: RNCC: 5 | RNVC: 9

24 Nov 1993

5340-12-172-2535
Mending Plate

121722535
2360-261130.03.0: RNCC: 2 | RNVC: 2
2360-261130.03.0: RNCC: 3 | RNVC: 2
2360-261130-03-0: RNCC: 5 | RNVC: 2
2360-261130.03.0: RNCC: 5 | RNVC: 2
2360-261130-03-0: RNCC: 5 | RNVC: 9
2360-261130.03.0: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-193-2910
Nonmetallic Bumper

121932910
DIN95364-A40X30-NR60ST-M8X22,5: RNCC: 2 | RNVC: 2
1.40.30.4.60NR/ST-M8X22,5: RNCC: 5 | RNVC: 2
811.030.040.030.08X22,5.NR60.ST: RNCC: 5 | RNVC: 2
81130-40X30-M8X22,5.NR60.ST: RNCC: 5 | RNVC: 2
3018120: RNCC: 5 | RNVC: 2
3018120/11MN60: RNCC: 5 | RNVC: 2
7516340: RNCC: 5 | RNVC: 2
VG95364-A40X30-M8X22,5-NR60ST: RNCC: 5 | RNVC: 9
VG95364-A40X30-NR60ST-M8X22,5: RNCC: 5 | RNVC: 9

7 Jul 1982

5340-12-701-3665
Mounting Plate

127013665
VG95211-ML-127013665: RNCC: 2 | RNVC: 2
5.12.5302.1551.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-377-1065
Loop Clamp

123771065
DIN3016-1-D1-12X15-W5-2-NBR: RNCC: 2 | RNVC: 2

11 Dec 2008

5340-12-339-2890
Mending Plate

123392890
DIN3015-Z-AP-2-W1: RNCC: 2 | RNVC: 2
AP-B2: RNCC: 3 | RNVC: 2
SP2D: RNCC: 5 | RNVC: 2
AP-B2: RNCC: 5 | RNVC: 2
SP 2 D: RNCC: 5 | RNVC: 9

6 Nov 1995

5340-12-701-4515
Mounting Bracket

127014515
VG95211-ML-127014515: RNCC: 2 | RNVC: 2
5.12.5314.0730.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-1369
Webbing Strap

123811369
6.373-395.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-178-8120
Mounting Bracket

121788120
5561658/4: RNCC: 2 | RNVC: 2
5561658/4: RNCC: 3 | RNVC: 2
5561658-4A: RNCC: 5 | RNVC: 2
5561658-4: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-193-3209
Electrical-Mechanical Equipment Post

121933209
1406539/4: RNCC: 3 | RNVC: 2
1406539-4: RNCC: 5 | RNVC: 2

12 Jul 1982

5340-12-356-6177
Access Cover

123566177
0337 3126: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-300-9119
Double Angle Bracket

123009119
332104-4701.000: RNCC: 3 | RNVC: 2
332104-4701.000: RNCC: 5 | RNVC: 9
1200032-21210.001: RNCC: 5 | RNVC: 9

11 Sep 1984

5340-12-313-3512
Cane Bolt

123133512
1069051: RNCC: 2 | RNVC: 2
1069051: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-12-378-6891
Loop Clamp

123786891
857835153010: RNCC: 3 | RNVC: 2

4 May 2009

5340-12-309-8310
Support Hook

123098310
3274275189: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-372-0040
Access Cover

123720040
4168477: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-372-4729
Mounting Bracket

123724729
9414298368: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-12-318-2642
Door Holder

123182642
C44.0115.00: RNCC: 3 | RNVC: 2
4607200416: RNCC: 5 | RNVC: 2

23 Jun 1989

5340-12-317-9048
Protection Bellows

123179048
8917: RNCC: 3 | RNVC: 2

24 May 1989

5340-12-332-3924
Mending Plate

123323924
DKAU019: RNCC: 3 | RNVC: 2

5 Aug 1993

5340-12-352-5336
Loop Clamp

123525336
13788201: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-12-357-8810
Mending Plate

123578810
2300042-254500.001: RNCC: 2 | RNVC: 2
2300042-254500.001: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-12-368-1421
Dust And Moisture Seal Protective Cap

123681421
344991300: RNCC: 2 | RNVC: 2
344991300: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-164-6734
Mending Plate

121646734
81974860006: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-365-8675
Double Angle Bracket

123658675
05097100: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-027-4418

5340-12-310-5353
Angle Bracket

123105353
78203 59207: RNCC: 2 | RNVC: 2
7820359207: RNCC: 3 | RNVC: 2
78203 59207: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-336-7090
Handle Grip

123367090
8304310: RNCC: 3 | RNVC: 2
8304310: RNCC: 5 | RNVC: 9

12 Dec 1994

5340-12-359-4917
Rod End Clevis

123594917
BD5.100.134.541: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-348-6625
Mounting Bracket

123486625
4647101: RNCC: 2 | RNVC: 2
4647101: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-388-5349
Expansion Shield

123885349
50523: RNCC: 3 | RNVC: 2
SLM12N: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-12-304-9737
Nonmetallic Bumper

123049737
3149190637: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-12-300-7459
Nonmetallic Bumper

123007459
A11A532440001: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-389-2549
Dust And Moisture Seal Protective Plug Set

123892549
129589009100: RNCC: 3 | RNVC: 2
129589009100: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-12-011-2853

5340-12-090-7476

5340-12-369-6599
Angle Bracket

123696599
63021: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-323-7364
Hinge Torsion Bar

123237364
9000 8249: RNCC: 3 | RNVC: 2

12 Dec 1990

5340-12-336-6136
Mending Plate

123366136
4220 312 204: RNCC: 3 | RNVC: 2
4220 312 204: RNCC: 5 | RNVC: 2

1 Dec 1994

5340-12-347-3503
Mounting Bracket

123473503
4965.05.05: RNCC: 2 | RNVC: 2
4965.05.05: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-308-6268
Hand Crank

123086268
3900054-510000.00: RNCC: 2 | RNVC: 2
1750.5.15.00: RNCC: 3 | RNVC: 2

30 Oct 1986

5340-12-701-7538
Loop Clamp

127017538
5.12.7616.0360.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-7753
Dust And Moisture Seal Protective Cap

123317753
4630370414: RNCC: 3 | RNVC: 2
463 037 041 4: RNCC: 5 | RNVC: 2
463 037 0414: RNCC: 5 | RNVC: 2
00009730460: RNCC: 5 | RNVC: 9

21 Jun 1993

5340-12-168-5478
Helical Compression Spring Retainer

121685478
WW419170A: RNCC: 3 | RNVC: 9
WW 419 170 A: RNCC: 5 | RNVC: 2
WW419170A: RNCC: 5 | RNVC: 2
WW419170A: RNCC: 5 | RNVC: 2
WW 419 170 A: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-333-1978
Access Cover

123331978
81429025191: RNCC: 2 | RNVC: 2
81429025191: RNCC: 3 | RNVC: 2
81.42902.5191: RNCC: 5 | RNVC: 2

9 Nov 1993

5340-12-378-1901
Barrel Bolt

123781901
252.72.708: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-390-4557
Dust And Moisture Seal Protective Cover

123904557
34168: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-12-150-7261
Spannschlosz

5340-12-149-9846
Verriegelung Hebel

5340-12-150-7227
Spannschlosz

5340-12-198-8428
Loop Clamp

121988428
PAN4231L3232: RNCC: 3 | RNVC: 2

3 Mar 1984

5340-12-196-5543
Nonmetallic Bumper

121965543
81960200150: RNCC: 3 | RNVC: 2
81.96020.0150: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-371-5869
Retaining Clip

123715869
T881M4032210: RNCC: 2 | RNVC: 2
T881M4032210: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-390-0538
Blank Panel

123900538
DU 407 055 AE: RNCC: 3 | RNVC: 2
DU 407 055 AE: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-361-0024
Bow Handle

123610024
2290: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-198-3486
Helical Compression Spring Seat

121983486
27 0318 131: RNCC: 2 | RNVC: 2
9859895: RNCC: 3 | RNVC: 9
27 0318 131: RNCC: 5 | RNVC: 2
27 0318 131: RNCC: 5 | RNVC: 9
270318131: RNCC: 5 | RNVC: 9

18 Jan 1984

5340-12-043-3562

5340-12-094-0006

5340-12-130-1979

5340-12-186-8629
Spring Tension Clip

121868629
LN29789A10: RNCC: 2 | RNVC: 2
A10LN29789: RNCC: 5 | RNVC: 2

13 Feb 1981

5340-12-310-4040
Mending Plate

123104040
2300227-321060.001: RNCC: 2 | RNVC: 2
2300227-321060.001: RNCC: 3 | RNVC: 2

19 May 1987

5340-12-011-5333

5340-12-389-0596
Expansion Shield

123890596
050405: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-164-4573
Loop Clamp

121644573
3609950101: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-9524
Webbing Strap

123289524
2654-971124.00: RNCC: 2 | RNVC: 2
2654-971124.00: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-173-0003
Retaining Strap

121730003
3875460244: RNCC: 3 | RNVC: 2

13 Mar 1978

5340-12-360-4208
Spring Holder

123604208
1733139003: RNCC: 3 | RNVC: 2

20 May 2003

5340-12-199-8008
Angle Bracket

121998008
4900123-620031.00: RNCC: 2 | RNVC: 2
4900123-620031.00: RNCC: 3 | RNVC: 2

31 May 1984

5340-12-391-6645
Turnbuckle

123916645
M5537090200600: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-12-345-4383
Mounting Plate

123454383
54.0053.406.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-302-7553
Angle Bracket

123027553
CF 493 040: RNCC: 3 | RNVC: 2
CF 493 040: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-300-2707
Mending Plate

123002707
A11A121408251: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-349-8859
Angle Bracket

123498859
A1Z10283548: RNCC: 2 | RNVC: 2
A1Z10283548: RNCC: 3 | RNVC: 2
20361078: RNCC: 5 | RNVC: 2

20 Jan 2000

5340-12-360-1524
Mounting Bracket

123601524
9424700781: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-360-0622
Cushioning Pad

123600622
9417220180: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-12-361-7858
Loop Clamp

123617858
EN4114V10WH1: RNCC: 2 | RNVC: 2

18 Nov 2003

5340-12-310-9967
Angle Bracket

123109967
01068500: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-349-8925
Retaining Strap

123498925
T212M2004101: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-350-0078
Dust And Moisture Seal Protective Cap

123500078
81981260035: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-363-6123
Access Cover

123636123
7058684332VW: RNCC: 3 | RNVC: 2
705 868 433 2VW: RNCC: 5 | RNVC: 2

8 Jul 2004

5340-12-167-5474
Angle Bracket

121675474
3553400: RNCC: 3 | RNVC: 2
2841-1212-00: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-195-3748
Lock-Release Lever

121953748
2500125-211400.00: RNCC: 2 | RNVC: 2
2500125-211400.00: RNCC: 3 | RNVC: 2
2500125-211400.00: RNCC: 3 | RNVC: 2
2500125-211400-00: RNCC: 5 | RNVC: 2
2500125-211400-00: RNCC: 5 | RNVC: 9
2500125-211400.00: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-12-176-3584
Hasp Staple

121763584
23302-182120.00: RNCC: 2 | RNVC: 2
2651316: RNCC: 3 | RNVC: 2
2651-316: RNCC: 5 | RNVC: 2
23302-182120: RNCC: 5 | RNVC: 9

27 Nov 1978

5340-12-382-8467
Loop Clamp

123828467
HRGKSM0R89-92/93STZN: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-12-170-9888
Spring Tension Clip

121709888
H070-5-5695: RNCC: 3 | RNVC: 2
81.97640-0153: RNCC: 5 | RNVC: 2
81976400153: RNCC: 5 | RNVC: 2

29 Aug 1977

5340-12-301-2489
Mending Plate

123012489
P-243843-004: RNCC: 3 | RNVC: 2
P243843-004: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-314-6976
Resilient Mount

123146976
60165003-A-M20: RNCC: 3 | RNVC: 2
E1N3340-01: RNCC: 3 | RNVC: 2
331952197: RNCC: 5 | RNVC: 2
VG95365-D5-NR-AMST: RNCC: 5 | RNVC: 9

30 Jul 1988

5340-12-180-8725
Plain Solid Disk

121808725
AFG0174952: RNCC: 3 | RNVC: 2
AFG017495-2: RNCC: 5 | RNVC: 2

8 Oct 1979

5340-12-189-7697
Hand Crank

121897697
VG85087-A-125X11-AM: RNCC: 2 | RNVC: 2
VG85087-A-125X11-AM: RNCC: 3 | RNVC: 2
VG85087-A-125X11-AM: RNCC: 3 | RNVC: 2
VG85087-A-125X11-AM: RNCC: 3 | RNVC: 9
A125X11VG85087-RG5: RNCC: 5 | RNVC: 9
A125X11VG85087GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A125X11VG85087RG5: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-306-0626
Case Corner

123060626
553-20000.010: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-136-1701
Retaining Strap

121361701
81974010189: RNCC: 3 | RNVC: 2
00.04362-9740: RNCC: 5 | RNVC: 2
00043629740: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-312-7379
Access Cover

123127379
23114-0450.01: RNCC: 2 | RNVC: 2
23114-0450.01: RNCC: 3 | RNVC: 2
23114-0450.01: RNCC: 5 | RNVC: 9
9864711: RNCC: 5 | RNVC: 9

1 Feb 1988

5340-12-122-6218
Loop Clamp

121226218
4049950235: RNCC: 3 | RNVC: 2
32-4041-1006-00: RNCC: 5 | RNVC: 2
324041100600: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-343-1041
Mounting Bracket

123431041
5092-183: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-12-316-1838
Angle Bracket

123161838
5802261-580000.000: RNCC: 2 | RNVC: 2
5802261-580000.000: RNCC: 3 | RNVC: 2

29 Dec 1988

5340-12-327-4316
Mending Plate

123274316
704-126900-902-0: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-181-4847
Access Cover

121814847
2300033-306740-04: RNCC: 2 | RNVC: 2
2300033-306740-04: RNCC: 5 | RNVC: 9
2300033-306740-04: RNCC: 5 | RNVC: 9
2300033-306740.04: RNCC: 5 | RNVC: 9

26 Nov 1979

5340-12-328-9482
Hand Crank

123289482
583A575: RNCC: 3 | RNVC: 2
81.62641-6052: RNCC: 5 | RNVC: 2
81626416052: RNCC: 5 | RNVC: 2
583 K 0215: RNCC: 5 | RNVC: 2
583K0215: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-121-5305
Retaining Strap

121215305
1033050: RNCC: 3 | RNVC: 2
1033-05-0: RNCC: 5 | RNVC: 2
250-11VERZINKT: RNCC: 5 | RNVC: 2
503-151: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-349-8225
Dust And Moisture Seal Protective Cap

123498225
31 42 2 311 980: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-350-1007
Mounting Bracket

123501007
2300348-970100.012.0: RNCC: 3 | RNVC: 2
1810425: RNCC: 5 | RNVC: 2

15 Feb 2000

5340-12-326-9521
Friction Catch Stud

123269521
2300232-971410.002.0: RNCC: 2 | RNVC: 2
2300232-971410.002.0: RNCC: 3 | RNVC: 2

13 Nov 1991

5340-12-377-4055
Mounting Plate

123774055
8605001.3.550.20: RNCC: 3 | RNVC: 2
8605001355020: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-12-387-3914
Detent Plunger

123873914
1030229-171001.000.0: RNCC: 3 | RNVC: 2

8 Dec 2011

5340-12-169-2040
Nonmetallic Bumper

121692040
CF 446 614 A: RNCC: 2 | RNVC: 2
CF 446 614: RNCC: 5 | RNVC: 2
CF 446 614 A: RNCC: 5 | RNVC: 2
CF446614: RNCC: 5 | RNVC: 2
CF446614A: RNCC: 5 | RNVC: 2
CF 446 614: RNCC: 5 | RNVC: 2
CF 446 614 A: RNCC: 5 | RNVC: 2
CF446614: RNCC: 5 | RNVC: 2
CF446614A: RNCC: 5 | RNVC: 2
CF 446 614: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-382-4156
Loop Clamp

123824156
01571490: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-12-318-0218
Butt Hinge

123180218
539867: RNCC: 3 | RNVC: 2
A13.0236.00: RNCC: 5 | RNVC: 2
0431.058.4: RNCC: 5 | RNVC: 2
0539867: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-347-5233
Mounting Bracket

123475233
5034.04.00: RNCC: 2 | RNVC: 2
5034.04.00: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-12-182-9994
Manual Control Handle

121829994
0032847: RNCC: 3 | RNVC: 2
32847-43323: RNCC: 5 | RNVC: 2

13 Mar 1980

5340-12-377-5741
Lock Bolt

123775741
33336: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-12-339-0306
Angle Bracket

123390306
10.41.082.00: RNCC: 3 | RNVC: 2
0008631414: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-12-329-3683
Access Door

123293683
2300248-80710.00: RNCC: 2 | RNVC: 2
2300248-80710.00: RNCC: 3 | RNVC: 2
2300248-80710.00: RNCC: 5 | RNVC: 2
2300248-80710.00: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-12-329-5183
Angle Bracket

123295183
4619390114: RNCC: 3 | RNVC: 2

26 Aug 1992

5340-12-197-5303
Resilient Mount

121975303
4212400740: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-326-4546
Retaining Strap

123264546
6735460075: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-329-4629
Key Blank

123294629
1180: RNCC: 3 | RNVC: 2

21 Aug 1992

5340-12-302-7905
Mending Plate

123027905
178.E56.80: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-199-1795
Nonmetallic Bumper

121991795
411513381: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-198-7980
Retaining Clip

121987980
5801998-641200.01: RNCC: 2 | RNVC: 2
5801998-641200.01: RNCC: 3 | RNVC: 2

27 Feb 1984

5340-12-300-6626
Lock-Release Lever

123006626
1000091-5200: RNCC: 2 | RNVC: 2
1000091-5200: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-375-6939
Double Angle Bracket

123756939
L252M4803205: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-12-359-9797
Headless Straight Rod

123599797
39: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-12-328-6494
Nonmetallic Bumper

123286494
281511353A: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-12-316-9689
Dust And Moisture Seal Protective Cap

123169689
6162010008: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-369-0133
Spring Tension Clip

123690133
7803061172: RNCC: 2 | RNVC: 2
7803061172: RNCC: 3 | RNVC: 2

12 May 2006

5340-12-157-9193
Electrical-Mechanical Equipment Post

121579193
123036: RNCC: 3 | RNVC: 2
123036: RNCC: 5 | RNVC: 2
123036: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-352-9089
Webbing Strap

123529089
4258600252: RNCC: 3 | RNVC: 2

4 Jan 2001

5340-12-156-3488

5340-12-042-5534

5340-12-307-4530
Loop Clamp

123074530
210158-4000: RNCC: 3 | RNVC: 2

19 Jun 1986

5340-12-310-5038
Case Corner

123105038
4355251039: RNCC: 3 | RNVC: 2

27 May 1987

5340-12-198-5109
Angle Bracket

121985109
2143634006: RNCC: 3 | RNVC: 2

3 Feb 1984

5340-12-356-6215
Manual Control Handle

123566215
1000-U510: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-321-8701
Access Door

123218701
9000 8189: RNCC: 3 | RNVC: 2

4 Jul 1990

5340-12-356-1333
Loop Clamp

123561333
83200A: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-199-3940
Mending Plate

121993940
01TC34665: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-316-2402
Loop Clamp

123162402
55300495: RNCC: 3 | RNVC: 2
90220093: RNCC: 5 | RNVC: 2
55300495: RNCC: 5 | RNVC: 2

3 Jan 1989

5340-12-305-6106
Sealing Plug Assembly

123056106
050797: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-364-2448
Retaining Clip

123642448
0002951173: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-358-7984
Mounting Bracket

123587984
1H0 611 800: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-360-3721
Loop Clamp

123603721
0009553606: RNCC: 3 | RNVC: 2
0009553606: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-191-6705
Pad Eye

121916705
3614524005: RNCC: 3 | RNVC: 2
36145 24005: RNCC: 5 | RNVC: 9

23 Feb 1982

5340-12-382-9447
Spring Holder

123829447
23303015: RNCC: 3 | RNVC: 2

26 Aug 2010

5340-12-334-2230
Clamping Catch

123342230
731672: RNCC: 3 | RNVC: 2

14 Apr 1994

5340-12-026-2204

5340-12-303-6548
Electrical-Mechanical Equipment Post

123036548
01TC34614: RNCC: 3 | RNVC: 2

18 Apr 1985

5340-12-362-8516
Mounting Plate

123628516
51-51676: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-144-6309

5340-12-372-6292
Access Cover

123726292
3D17470: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-12-320-7236
Helical Compression Spring Retainer

123207236
4900059-751530.011.0: RNCC: 3 | RNVC: 2
1227772: RNCC: 5 | RNVC: 2

9 Feb 1990

5340-12-332-8382
Manual Control Handle

123328382
201.231.00.0: RNCC: 3 | RNVC: 2

24 Sep 1993

5340-12-179-8390
Mounting Plate

121798390
CF 446 477 A: RNCC: 3 | RNVC: 2
CF 446 477 A: RNCC: 3 | RNVC: 2
CF 446 477 A: RNCC: 5 | RNVC: 2
CF446477A: RNCC: 5 | RNVC: 2
CF446477A: RNCC: 5 | RNVC: 2
CF446477A: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-366-4962
Mounting Bracket

123664962
2 0066-890: RNCC: 3 | RNVC: 2
2 0066-890: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-12-328-9838
Dust And Moisture Seal Protective Cap

123289838
200Z9X16: RNCC: 3 | RNVC: 2
GPN200Z9X16: RNCC: 5 | RNVC: 2
N17361: RNCC: 5 | RNVC: 2
GPN200,Z9X16: RNCC: 5 | RNVC: 9

4 Jul 1992

5340-12-349-7820
Loop Clamp

123497820
T290M00X1002: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-337-9935
Angle Bracket

123379935
4932301: RNCC: 3 | RNVC: 2

9 May 1995

5340-12-333-1252
Mounting Plate

123331252
51056400021: RNCC: 3 | RNVC: 2
51.05640.0021: RNCC: 5 | RNVC: 2

2 Nov 1993

5340-12-381-6926
Double Angle Bracket

123816926
279658758: RNCC: 2 | RNVC: 2
279658758: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-12-343-8940
Clamping Catch

123438940
408709: RNCC: 3 | RNVC: 2

12 Aug 1997

5340-12-357-0163
Block Clamp

123570163
HRES-3-KPPA: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-020-7259

5340-12-362-0733
Mounting Bracket

123620733
117-84433: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-323-9709
Access Cover

123239709
122.459: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-12-199-5780
Resilient Mount

121995780
06.018.18.203: RNCC: 3 | RNVC: 2
111L84701: RNCC: 5 | RNVC: 2
111L84701: RNCC: 5 | RNVC: 2

15 May 1984

5340-12-176-6802
Nonmetallic Bumper

121766802
WW 415 587: RNCC: 2 | RNVC: 2
WW 415 587: RNCC: 3 | RNVC: 9
WW415587: RNCC: 5 | RNVC: 2
WW 415 587: RNCC: 5 | RNVC: 2
WW415587: RNCC: 5 | RNVC: 9

13 Dec 1978

5340-12-199-5087
Plain Solid Disk

121995087
1200024-12100.004: RNCC: 2 | RNVC: 2
1200024-12100.004: RNCC: 3 | RNVC: 2
1200024-12100.004: RNCC: 5 | RNVC: 9
1200024-12100.004: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-199-5640
Mending Plate

121995640
6006 200 070: RNCC: 3 | RNVC: 2
6006200070: RNCC: 5 | RNVC: 9

11 May 1984

5340-12-094-4724

5340-12-344-8141
Friction Catch

123448141
2907257: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-12-361-0343
Angle Bracket

123610343
J92220364-003: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-301-6354
Mending Plate

123016354
43712203-301: RNCC: 2 | RNVC: 2
43712203-301: RNCC: 3 | RNVC: 2
43712203-301: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-163-2153
Retaining Strap

121632153
03016600: RNCC: 3 | RNVC: 2
03016600-274: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-6204
Angle Bracket

123106204
52.0258.013.00: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-340-6954
Mounting Bracket

123406954
463-611210.001: RNCC: 3 | RNVC: 2
DHAC013: RNCC: 5 | RNVC: 2

24 May 1996

5340-12-380-8787
Turnbuckle

123808787
5734.78.12: RNCC: 3 | RNVC: 2

8 Dec 2009

5340-12-123-2717
Platte

121232717
227253: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-316-5481
Butt Hinge

123165481
LN9172KGG120: RNCC: 2 | RNVC: 2

24 Jan 1989

5340-12-349-0715
Mounting Bracket

123490715
2300387-700846.000: RNCC: 2 | RNVC: 2
9911493: RNCC: 3 | RNVC: 2
2300387-700846.000: RNCC: 5 | RNVC: 9
9911493: RNCC: 5 | RNVC: 9

21 Sep 1999

5340-12-043-1358

5340-12-182-2506
Mounting Bracket

121822506
4115500440: RNCC: 3 | RNVC: 2
411 550 04 40: RNCC: 5 | RNVC: 2

21 Jan 1980

5340-12-316-6913
Mounting Plate

123166913
51-51663: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-180-1853
Dust And Moisture Seal Protective Plug

121801853
81960020062: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-12-344-3479
Mending Plate

123443479
81429400216: RNCC: 3 | RNVC: 2
81.42940.0216: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-334-8178
Mounting Bracket

123348178
715.403B: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-027-9050

5340-12-302-6726
Manual Control Handle

123026726
TK-BA35-5340-372: RNCC: 2 | RNVC: 2
M0203 3310: RNCC: 3 | RNVC: 2
6301-683.03(5): RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-701-2695
Mounting Bracket

127012695
VG95211-ML-127012695: RNCC: 2 | RNVC: 2
5.12.4805.2050.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-328-9357
Catch Strike

123289357
2350-010200.031.0: RNCC: 2 | RNVC: 2
2350-010200.031.0: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-702-5698
Mounting Bracket

127025698
VG95211-ML-127025698: RNCC: 2 | RNVC: 2
5.51.7701.1120.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-9064
Retaining Strap

123309064
2718-000000.025.0: RNCC: 2 | RNVC: 2
2718-000000.025.0: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-12-701-1931
Angle Bracket

127011931
VG95211-ML-127011931: RNCC: 2 | RNVC: 2
5.12.0602.0001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-380-9880
Bow Handle

123809880
GN728-180-B-SW: RNCC: 3 | RNVC: 2

18 Dec 2009

5340-12-326-5809
Support Hook

123265809
2300232-182412.000.0: RNCC: 2 | RNVC: 2
2300232-182412.000.0: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-12-379-2214
Compression Cup

123792214
EM888/4559: RNCC: 3 | RNVC: 2
EM8884559: RNCC: 5 | RNVC: 2
100135: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-12-300-8550
Spring Loaded Cylinder Fastener

123008550
TK-BA35-5340-355: RNCC: 2 | RNVC: 2
M0203 3300: RNCC: 3 | RNVC: 2
1601-330.07(4): RNCC: 5 | RNVC: 9

5 Sep 1984

5340-12-162-0015
Pipe Hanger Extension Bar

121620015
188-190: RNCC: 3 | RNVC: 2
1761-0001-0002: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-3505
Angle Bracket

123653505
2300109-062920.001.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-309-4086
Dust And Moisture Seal Protective Cap-Plug

123094086
TL-4-188: RNCC: 3 | RNVC: 2
W 4098 032: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-12-303-9082
Clamping Catch

123039082
V46L38-1-1AA: RNCC: 3 | RNVC: 2

20 May 1985

5340-12-385-2885
Door Closer

123852885
TS93B/G EN 5-7: RNCC: 3 | RNVC: 2

18 May 2011

5340-12-334-9090
Pipe Hanger

123349090
4207618016: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-12-308-5364
Elbow Catch

123085364
6671233: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-12-187-9595
Access Cover

121879595
03206200: RNCC: 3 | RNVC: 2
29.01.38B: RNCC: 5 | RNVC: 9
03206200.294: RNCC: 5 | RNVC: 9

20 May 1981

5340-12-331-3782
Mechanic Equipment Hardware Kit

123313782
070298051A: RNCC: 3 | RNVC: 2

29 Apr 1993

5340-12-334-0938
Handle Grip

123340938
20817-327: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-12-093-8324

5340-12-352-2372
Mounting Bracket

123522372
2300387-612100.001: RNCC: 2 | RNVC: 2
9909064: RNCC: 3 | RNVC: 2
2300387-612100.001: RNCC: 5 | RNVC: 9
9909064: RNCC: 5 | RNVC: 9

27 Oct 2000

5340-12-380-9988
Mounting Bracket

123809988
41245626: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-12-333-5150
Nonmetallic Bumper

123335150
1103250185: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-356-1483
Angle Bracket

123561483
4617150312: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-195-4092
Flush Lock

121954092
1169Z 40MM DORNMASZ: RNCC: 3 | RNVC: 2
1169Z40MMDORNMASZ: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-372-8389
Sliding Block

123728389
5020610076: RNCC: 3 | RNVC: 2
502 061 00 76: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-12-193-9055
Manual Control Handle

121939055
5546799: RNCC: 3 | RNVC: 2
554.6799: RNCC: 5 | RNVC: 2

13 Sep 1982

5340-12-139-8227

5340-12-314-3651
Retaining Strap

123143651
28209952020: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-12-391-4819
Spacing Threaded Standoff

123914819
I010232: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-353-0308
Dust And Moisture Seal Protective Cover

123530308
1219 0307: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-307-2457
Mending Plate

123072457
RP988899: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-330-9354
Access Cover

123309354
592601-9007.000: RNCC: 3 | RNVC: 2

1 Mar 1993

5340-12-381-8162
Retaining Strap

123818162
13.11.43: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-12-361-4621
Loop Clamp

123614621
N3903: RNCC: 3 | RNVC: 2
N 3903: RNCC: 5 | RNVC: 9

6 Oct 2003

5340-12-392-1684
Double Angle Bracket

123921684
4100095-982149.000.0: RNCC: 2 | RNVC: 2
4100095-982149.000.0: RNCC: 3 | RNVC: 2

10 May 2013

5340-12-388-1858
Section Block Clamp

123881858
1030105-206300.002.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-313-8662
Loop Clamp

123138662
3874900041: RNCC: 3 | RNVC: 2
387 490 00 41: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-355-3919
Dust And Moisture Seal Boot

123553919
0520.721-238: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-12-175-0993
Resilient Mount

121750993
0118126/11MN60: RNCC: 3 | RNVC: 2
0118126.60: RNCC: 5 | RNVC: 2
0009884510: RNCC: 5 | RNVC: 2
0118126: RNCC: 5 | RNVC: 9

23 Aug 1978

5340-12-198-2860
Support Hook

121982860
66.3527.615.05-A001: RNCC: 3 | RNVC: 2
748003: RNCC: 5 | RNVC: 2

11 Jan 1984

5340-12-360-4733
Anschlagecke

123604733
82-0975: RNCC: 3 | RNVC: 2

23 May 2003

5340-12-163-3405
Lock-Release Lever

121633405
0141204003: RNCC: 3 | RNVC: 2
01412.40-30GRAD-GRAU: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-140-0308
Buckle

121400308
DIN5291-16-MS-VERNICKELT: RNCC: 2 | RNVC: 2
16DIN5291MSVERNICKELT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-1516
Mounting Bracket

123561516
8382370139: RNCC: 2 | RNVC: 2
8382370139: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-324-2082
Angle Bracket

123242082
1121-23507.13: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-12-319-8063
Bow Handle

123198063
CF 832 086 AE: RNCC: 2 | RNVC: 2
CF 832 086 AE: RNCC: 3 | RNVC: 2
CF 832 086 AE: RNCC: 5 | RNVC: 2

7 Nov 1989

5340-12-358-0384
Mechanical Stop

123580384
2.13.04: RNCC: 3 | RNVC: 2
2-13-04: RNCC: 5 | RNVC: 9

4 Sep 2002

5340-12-323-6096
Clamping Catch

123236096
V951L02-1-2AF: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-358-4250
Access Cover

123584250
4000A-341200.010.0: RNCC: 2 | RNVC: 2
4000A-341200.010.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-700-9160
Rod End Connector

127009160
VG95211-ML-127009160: RNCC: 2 | RNVC: 2
2.49.6114.2176.98: RNCC: 3 | RNVC: 2
94-6114-2176: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-303-0224
Butt Hinge Leaf

123030224
03477843: RNCC: 3 | RNVC: 2
0144-44-420-10: RNCC: 5 | RNVC: 2
02919294: RNCC: 5 | RNVC: 2
E0144-44-420.10: RNCC: 5 | RNVC: 2

20 Feb 1985

5340-12-300-8730
Bow Handle

123008730
2116-200.10(5): RNCC: 3 | RNVC: 2

6 Sep 1984

5340-12-701-7826
Angle Bracket

127017826
VG95211-ML-127017826: RNCC: 2 | RNVC: 2
5.12.7800.8185.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-2891
Mounting Bracket

127032891
VG95211-ML-127032891: RNCC: 2 | RNVC: 2
1-16-3 OST1 10220-71: RNCC: 3 | RNVC: 2

24 Mar 2000

5340-12-322-3518
Spring Holder

123223518
013 003: RNCC: 3 | RNVC: 2
406-188-01-01: RNCC: 5 | RNVC: 2
81.62340.0021: RNCC: 5 | RNVC: 2
81623400021: RNCC: 5 | RNVC: 2

14 Aug 1990

5340-12-182-6898
Loop Clamp

121826898
RSGU1.8/15A: RNCC: 3 | RNVC: 2
4519015008: RNCC: 5 | RNVC: 2
RSGU1100-8-15A: RNCC: 5 | RNVC: 2
RSGU1100.8/15A: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-12-326-3305
Nonmetallic Bumper

123263305
704-126990-904-0: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-359-9385
Dust And Moisture Seal Boot

123599385
2500261-182400.019.0: RNCC: 2 | RNVC: 2
2500261-182400.019.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-700-8928
Loop Clamp

127008928
VG95211-ML-127008928: RNCC: 2 | RNVC: 2
2-8-11-10 OST1 11119-73: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-003-0280

5340-12-359-2274
Angle Bracket

123592274
T531M4521232: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-360-1523
Mounting Bracket

123601523
9424700081: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-359-8929
Dust And Moisture Seal Protective Cap

123598929
0121851: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-12-332-1337
Spring Tension Clip

123321337
1H0853733B: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-336-9869
Retaining Strap

123369869
81251400096: RNCC: 3 | RNVC: 2
81.25140.0096: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-180-5947
Hinge Torsion Bar

121805947
4200274: RNCC: 3 | RNVC: 2

19 Sep 1979

5340-12-092-0943

5340-12-352-7143
Access Cover

123527143
64416366: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-174-7655
Dust And Moisture Seal Protective Plug

121747655
300F25: RNCC: 3 | RNVC: 2
300002500: RNCC: 5 | RNVC: 2
F25: RNCC: 5 | RNVC: 2
F25GPN300: RNCC: 5 | RNVC: 2
GPN300,F25: RNCC: 5 | RNVC: 2
GPN300F25: RNCC: 5 | RNVC: 2

1 Aug 1978

5340-12-310-4861
Mending Plate

123104861
2300227-341100.006: RNCC: 2 | RNVC: 2
2300227-341100.006: RNCC: 3 | RNVC: 2
2300227-341100.006: RNCC: 5 | RNVC: 9

26 May 1987

5340-12-359-9494
Nonmetallic Bumper

123599494
DIN95364-E80X60-NBR55STPH: RNCC: 2 | RNVC: 2

24 Mar 2003

5340-12-307-1566
Strap Fastener Loop

123071566
4069880183: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-322-8095
Plain Solid Disk

123228095
8470 032 153: RNCC: 3 | RNVC: 2
8470032153: RNCC: 5 | RNVC: 2
8470032153: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-355-8846
Dust And Moisture Seal Protective Plug

123558846
0029970986: RNCC: 3 | RNVC: 2

2 Jan 2002

5340-12-022-7570

5340-12-359-0512
Manual Control Lever

123590512
0008353843: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-184-8878
Metal Runner

121848878
CF205505AU: RNCC: 3 | RNVC: 2
CF 205 505 AU: RNCC: 5 | RNVC: 2
CF205505AU: RNCC: 5 | RNVC: 2
CF 205 505 AU: RNCC: 5 | RNVC: 2

26 Aug 1980

5340-12-342-1590
Angle Bracket

123421590
536M09763: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-380-4714
Handwheel

123804714
H02822: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-302-6701
Handwheel

123026701
1040045: RNCC: 3 | RNVC: 2
040045: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-195-4653
Butt Hinge Leaf

121954653
52.1405.100.06: RNCC: 3 | RNVC: 2
52-1405-100-06: RNCC: 5 | RNVC: 2

1 Mar 1983

5340-12-385-1381
Loop Holder

123851381
88208-51: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-157-4418
Mending Plate

121574418
51-0288-126-08: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-156-5465
Webbing Strap

121565465
42161-21110: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-381-9317
Flush Bolt

123819317
5371-140100A14K: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-12-703-3433
Retaining Strap

127033433
VG95211-ML-127033433: RNCC: 2 | RNVC: 2
N1119-584: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-175-8000
Resilient Mount

121758000
CF404487BR: RNCC: 3 | RNVC: 2
536056-0813.000: RNCC: 3 | RNVC: 2
CF 404 487 BR: RNCC: 5 | RNVC: 2
CF404487BR: RNCC: 5 | RNVC: 2
CF 404 487 BR: RNCC: 5 | RNVC: 2
CF404487BR: RNCC: 5 | RNVC: 2
CF 404 487 BR: RNCC: 5 | RNVC: 2
536056-0813.000: RNCC: 5 | RNVC: 9

18 Oct 1978

5340-12-331-9297
Angle Bracket

123319297
1780803: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-12-338-7862
Angle Bracket

123387862
4102611733: RNCC: 3 | RNVC: 2

24 Aug 1995

5340-12-702-4192
Mounting Bracket

127024192
VG95211-ML-127024192: RNCC: 2 | RNVC: 2
5.12.7070.1130.13: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3690
Mounting Plate

127013690
VG95211-ML-127013690: RNCC: 2 | RNVC: 2
5.12.5302.1730.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4084
Loop Clamp

127014084
VG95211-ML-127014084: RNCC: 2 | RNVC: 2
5.12.5311.8310.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-0287
Angle Bracket

123320287
160-74335-09: RNCC: 3 | RNVC: 2
160-74335-09: RNCC: 5 | RNVC: 9

16 Jul 1993

5340-12-313-0163
Double Angle Bracket

123130163
P-086147-081: RNCC: 3 | RNVC: 2
P086147-081: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-365-1915
Fuehrungs- Schiene

123651915
2500267-199820.001.0: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-12-199-6897
Double Angle Bracket

121996897
A-296770-045: RNCC: 3 | RNVC: 2
A296770-045: RNCC: 5 | RNVC: 2

23 May 1984

5340-12-328-8779
Lock-Release Lever

123288779
GN6337.3-25-M10-25-N: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-356-1860
Loop Clamp

123561860
DIN3016-1-A1-50X15-W5: RNCC: 2 | RNVC: 2
RS1.50/15-W5: RNCC: 3 | RNVC: 2
RS1 50/15-W5: RNCC: 5 | RNVC: 2
11048: RNCC: 5 | RNVC: 2
DIN3016-A1-50X15-W5: RNCC: 5 | RNVC: 9

30 Jan 2002

5340-12-156-5788
Retaining Strap

121565788
BSN22X20X2: RNCC: 3 | RNVC: 2
6-472-0101: RNCC: 5 | RNVC: 2
0632 311 272: RNCC: 5 | RNVC: 2
15200000022: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-333-3716
Double Angle Bracket

123333716
81429025163: RNCC: 2 | RNVC: 2
81429025163: RNCC: 3 | RNVC: 2
81.42902.5163: RNCC: 5 | RNVC: 2

7 Dec 1993

5340-12-326-4547
Double Angle Bracket

123264547
3963120987: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-333-9686
Manual Control Handle

123339686
171041.00.01: RNCC: 3 | RNVC: 2
1331113: RNCC: 5 | RNVC: 2

2 Mar 1994

5340-12-177-3197
Butt Hinge Leaf

121773197
WW 306 052 BR: RNCC: 2 | RNVC: 2
WW 306 052 BR: RNCC: 3 | RNVC: 9
WW 306 052 AR: RNCC: 5 | RNVC: 2
WW306052AR: RNCC: 5 | RNVC: 2
WW 306 052 BR: RNCC: 5 | RNVC: 2
WW 306 052 AR: RNCC: 5 | RNVC: 9
WW306052AR: RNCC: 5 | RNVC: 9

29 Jan 1979

5340-12-310-6231
Rod End Clevis

123106231
52.0260.010.02: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-092-3840

5340-12-305-5632
Retaining Strap

123055632
303965: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-042-5982

5340-12-338-1759
Spacing Threaded Standoff

123381759
243.2594: RNCC: 3 | RNVC: 2
243.2594.00: RNCC: 5 | RNVC: 2

31 May 1995

5340-12-319-9653
Mounting Plate

123199653
54.0028.156.25: RNCC: 3 | RNVC: 2

23 Nov 1989

5340-12-320-0460
Rod End Clevis

123200460
5128042500: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-12-341-7639
Mounting Bracket

123417639
2500255-322700.03.0: RNCC: 2 | RNVC: 2
2500255-322700.03.0: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-12-372-4102
Retaining Band

123724102
P70180 801003: RNCC: 2 | RNVC: 2
P70180 801003: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-301-8423
Nonmetallic Bumper

123018423
0009970925: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-12-199-3672
Retaining Strap

121993672
A11A823110130: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-310-2886
Mending Plate

123102886
1068884: RNCC: 2 | RNVC: 2
1068884: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-382-6877
Loop Clamp

123826877
15209003: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-173-8518
Retaining Strap

121738518
PAN4231EBE4922: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-376-3969
Dust And Moisture Seal Protective Cap

123763969
50279700: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-12-316-7337
Angle Bracket

123167337
51-76812: RNCC: 3 | RNVC: 2

8 Feb 1989

Load More Results