What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 59 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 59 of 178

5340-12-702-6015
Loop Clamp

127026015
VG95211-ML-127026015: RNCC: 2 | RNVC: 2
5158A-19: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-179-5502
Dust And Moisture Seal Protective Plug

121795502
300F7: RNCC: 3 | RNVC: 2
69 8499 54: RNCC: 5 | RNVC: 2
GPN300F7: RNCC: 5 | RNVC: 2
300000700: RNCC: 5 | RNVC: 9
F7: RNCC: 5 | RNVC: 9
F7GPN300: RNCC: 5 | RNVC: 9
GPN300,F7: RNCC: 5 | RNVC: 9

6 Jul 1979

5340-12-344-9966
Mounting Plate

123449966
160-25541-62: RNCC: 3 | RNVC: 2
160-25541-62: RNCC: 5 | RNVC: 9

20 Jan 1998

5340-12-164-3696
Retaining Strap

121643696
4030781541: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-024-8459

5340-12-154-6109
Retaining Strap

121546109
111G08011: RNCC: 3 | RNVC: 2
111G08011E1: RNCC: 5 | RNVC: 2
111G08011: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-194-1406
Strap Bolt

121941406
A501060: RNCC: 3 | RNVC: 2

6 Oct 1982

5340-12-180-6552
Mounting Bracket

121806552
81613505005: RNCC: 3 | RNVC: 2
81.61350.5005: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-374-5487
Dust And Moisture Seal Boot

123745487
1536411: RNCC: 3 | RNVC: 2

25 Feb 2008

5340-12-180-8651
Nonmetallic Bumper

121808651
3817230029: RNCC: 3 | RNVC: 2

8 Oct 1979

5340-12-010-8467

5340-12-322-6859
Rigid Caster

123226859
10041001: RNCC: 2 | RNVC: 2
10041001: RNCC: 3 | RNVC: 2

12 Sep 1990

5340-12-392-0181
Casement Fastener

123920181
1091-96: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-350-0655
Angle Bracket

123500655
T263M1005101: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-12-092-0913

5340-12-346-4297
Retaining Bail

123464297
03.160.56.01.0: RNCC: 3 | RNVC: 2
0316056010: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-310-2961
Access Cover

123102961
23223-395020.01.0: RNCC: 2 | RNVC: 2
23223-395020.01.0: RNCC: 3 | RNVC: 2

6 May 1987

5340-12-318-8597
Angle Bracket

123188597
2354-730216.001.0: RNCC: 2 | RNVC: 2
2354-730216.001.0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-701-6574
Loop Clamp

127016574
VG95211-ML-127016574: RNCC: 2 | RNVC: 2
5.12.7208.8300.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-168-6399
Leather Strap

121686399
1000025-290000-08: RNCC: 3 | RNVC: 2
1000025-290000.08: RNCC: 3 | RNVC: 2
1000025-290000-08: RNCC: 5 | RNVC: 9
1000025-290000.08: RNCC: 5 | RNVC: 9

25 Mar 1977

5340-12-356-8456
Angle Bracket

123568456
ED88-0100-01001-139: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-391-2513
Bow Handle

123912513
GN565-20-160-SW: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-12-356-6333
Angle Bracket

123566333
J28730013-003: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-148-3220
Hand Crank

121483220
VG85087-B-150X12-GT: RNCC: 2 | RNVC: 2
VG85087-B-150X12-GT: RNCC: 3 | RNVC: 2
VG85087-B-150X12-GT: RNCC: 3 | RNVC: 2
VG85087-B-150X12-GT: RNCC: 3 | RNVC: 9
B150X12VG85087GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-6646
Nonmetallic Bumper

121916646
4602950047: RNCC: 3 | RNVC: 2
2131-16: RNCC: 5 | RNVC: 2
721 1 26 009 2: RNCC: 5 | RNVC: 9

23 Feb 1982

5340-12-335-0510
Butt Hinge

123350510
DIN7955-C50-ST-ZN: RNCC: 2 | RNVC: 2
703 050 Z: RNCC: 3 | RNVC: 2
703050Z: RNCC: 5 | RNVC: 2

18 Jul 1994

5340-12-186-1363
Resilient Mount

121861363
208460010015: RNCC: 3 | RNVC: 2
208460010015: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-156-3034
Rod End Clevis

121563034
103561501: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-304-3422
Butt Hinge Leaf

123043422
2500093-3010.02: RNCC: 2 | RNVC: 2
2500093-3010.02: RNCC: 3 | RNVC: 2
2500093-3010.02: RNCC: 5 | RNVC: 9

8 Jul 1985

5340-12-154-3869
Retaining Strap

121543869
BSN13X20X2: RNCC: 3 | RNVC: 2
15200000013: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-1265
Mending Plate

121781265
81974860042: RNCC: 3 | RNVC: 2

22 Mar 1979

5340-12-323-8221
Lock-Release Lever

123238221
2904132M91: RNCC: 3 | RNVC: 2
395 910 848: RNCC: 5 | RNVC: 2

20 Dec 1990

5340-12-153-7057
Leather Strap

121537057
8784736006: RNCC: 3 | RNVC: 9

30 May 1969

5340-12-359-7642
Spacing Threaded Standoff

123597642
T631P3002110: RNCC: 3 | RNVC: 2
T631P3002110: RNCC: 5 | RNVC: 9

10 Mar 2003

5340-12-342-1550
Mounting Bracket

123421550
536H13701: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-369-9497
Manual Control Lever

123699497
65057: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-12-345-4317
Mounting Bracket

123454317
54.0053.105.00: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-12-358-8192
Section Block Clamp

123588192
DKAE003: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-302-4737
Angle Bracket

123024737
556-404202.000: RNCC: 3 | RNVC: 2
556-404202-000: RNCC: 5 | RNVC: 2

4 Jan 1985

5340-12-154-4991

5340-12-327-3756
Runner

123273756
81671650056: RNCC: 2 | RNVC: 2
81671650056: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-385-6556
Mounting Bracket

123856556
5240981839: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-025-8946

5340-12-329-0104
Permanent Magnet

123290104
MP4/PMM: RNCC: 3 | RNVC: 9
MP4/PMM: RNCC: 5 | RNVC: 2

8 Jul 1992

5340-12-331-1944
Loop Clamp

123311944
239.75.788: RNCC: 3 | RNVC: 2
239.71.799: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-12-364-8940
Nonmetallic Bumper

123648940
31658/AH-NR55: RNCC: 3 | RNVC: 2

12 Nov 2004

5340-12-320-4240
Mending Plate

123204240
3651 0323 198: RNCC: 3 | RNVC: 2

12 Jan 1990

5340-12-701-7077
Angle Bracket

127017077
VG95211-ML-127017077: RNCC: 2 | RNVC: 2
5.12.7601.0090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-6878
Mounting Bracket

127026878
VG95211-ML-127026878: RNCC: 2 | RNVC: 2
5.51.0602.1529.98: RNCC: 3 | RNVC: 2

25 Apr 1995

5340-12-146-8503
Loop Clamp

121468503
DIN3016-1-A1-12X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-12X15-W1-2: RNCC: 3 | RNVC: 2
RS1.12/15: RNCC: 3 | RNVC: 2
RS1100.12/15: RNCC: 5 | RNVC: 2
4110015012: RNCC: 5 | RNVC: 2
RS1100-12-15: RNCC: 5 | RNVC: 2
103117: RNCC: 5 | RNVC: 2
VG95931-A12X15-W1: RNCC: 5 | RNVC: 9
VG95931A12X15W1: RNCC: 5 | RNVC: 9
DIN3016-A1-12X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-2921
Helical Compression Spring Seat

121912921
NO PRIMARY REF 12-191-2921: RNCC: 3 | RNVC: 2
5HG 597/05: RNCC: 5 | RNVC: 9
5HG597-05: RNCC: 5 | RNVC: 9

26 Jan 1982

5340-12-352-4299
Manual Control Lever

123524299
2500238-070445.003.0: RNCC: 2 | RNVC: 2
2500238-070445.003.0: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-323-5959
Strap Fastener Loop

123235959
704-126200-912-3: RNCC: 3 | RNVC: 2
3200015-6,5MM BEFESTIGUNGSLOECHE: RNCC: 5 | RNVC: 2
704-126200-912-3: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-12-701-7042
Mounting Plate

127017042
VG95211-ML-127017042: RNCC: 2 | RNVC: 2
5.12.7240.2360.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-166-9285
Double Angle Bracket

121669285
23290-141002.001: RNCC: 2 | RNVC: 2
4944630040: RNCC: 3 | RNVC: 2
23290-141002.001: RNCC: 3 | RNVC: 2
23290-141002.001: RNCC: 5 | RNVC: 9
23290-141002-001: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-341-4034
Resilient Mount

123414034
106/4673-01-10-01: RNCC: 3 | RNVC: 2
106/4673-01-10-01: RNCC: 3 | RNVC: 2
36/05/4673-01-10-01: RNCC: 5 | RNVC: 2
106/4673-01-10-01: RNCC: 5 | RNVC: 2

31 Aug 1996

5340-12-192-6197
Spacing Threaded Standoff

121926197
PAN5171-10-060: RNCC: 3 | RNVC: 2

10 May 1982

5340-12-367-8738
Extension Drawer Slide

123678738
077 802: RNCC: 3 | RNVC: 2
KA3434/400: RNCC: 5 | RNVC: 2

26 Oct 2005

5340-12-351-3619
Access Cover

123513619
72.012-113.000:01: RNCC: 3 | RNVC: 2

18 Jul 2000

5340-12-356-1755
Angle Bracket

123561755
ED41-0800-00210-103: RNCC: 2 | RNVC: 2
ED41-0800-00210-103: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-354-1114
Mounting Plate

123541114
590619-0400.000: RNCC: 3 | RNVC: 2
590619-0400.000: RNCC: 5 | RNVC: 2
590619-0400.000: RNCC: 5 | RNVC: 9

6 Jun 2001

5340-12-332-4850
Manual Control Lever

123324850
1014209: RNCC: 3 | RNVC: 2
1B7-09-050-01-3: RNCC: 5 | RNVC: 2

16 Aug 1993

5340-12-701-9590
Rod End Clevis

127019590
VG95211-ML-127019590: RNCC: 2 | RNVC: 2
5.12.8102.4201.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-701-7334
Mounting Bracket

127017334
VG95211-ML-127017334: RNCC: 2 | RNVC: 2
5.12.7608.2500.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-6858
Mounting Plate

123606858
1873-090000.006.0: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-12-349-6066
Mending Plate

123496066
2500238-150900.001.0: RNCC: 2 | RNVC: 2
2500238-150900.001.0: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-701-4207
Loop Clamp

127014207
VG95211-ML-127014207: RNCC: 2 | RNVC: 2
5.12.5312.1000.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-152-3079
Mending Plate

121523079
5800400-0357-003: RNCC: 3 | RNVC: 2
6P358-357-3: RNCC: 5 | RNVC: 2
5800400-0357-003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-4179
Mounting Plate

127024179
VG95211-ML-127024179: RNCC: 2 | RNVC: 2
5.12.7050.8021.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-2530
Butt Hinge Leaf

123652530
2500278-191560.002.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-311-2952
Metal Runner

123112952
987-111110.00.0: RNCC: 3 | RNVC: 2
987-111110.00.0: RNCC: 5 | RNVC: 9

13 Aug 1987

5340-12-367-4394
Section Block Clamp

123674394
943384036: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-159-9593
Nonmetallic Bumper

121599593
7810041BL2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-320-1376
Mending Plate

123201376
4069125010: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-364-2491
Cushioning Pad

123642491
4367930296: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-321-5037
Mending Plate

123215037
060.20.0010: RNCC: 2 | RNVC: 2
060.20.0010: RNCC: 3 | RNVC: 2

25 May 1990

5340-12-321-8812
Angle Bracket

123218812
4353310040: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-12-165-0144

5340-12-141-6082

5340-12-043-1786

5340-12-354-1345
Catch Strike

123541345
1429L9-1AG: RNCC: 3 | RNVC: 2

8 Jun 2001

5340-12-317-3461
Sealing Plug Assembly

123173461
4325006534: RNCC: 3 | RNVC: 2
1696592: RNCC: 5 | RNVC: 2

30 Mar 1989

5340-12-321-4459
Dust And Moisture Seal Protective Cap

123214459
344991147: RNCC: 3 | RNVC: 2

21 May 1990

5340-12-156-4103

5340-12-090-7068

5340-12-335-1910
Access Cover

123351910
0048-200000A18B: RNCC: 2 | RNVC: 2
0048-200000A18B: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-12-360-2104
Angle Bracket

123602104
81626300053: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-321-0802
Angle Bracket

123210802
5803606-611000.01: RNCC: 2 | RNVC: 2
5803606-611000.01: RNCC: 5 | RNVC: 9

26 Mar 1990

5340-12-024-9847

5340-12-162-5076
Electrical-Mechanical Equipment Post

121625076
3422028706: RNCC: 3 | RNVC: 2
34220 28706: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-131-5502

5340-12-309-7942
Access Cover

123097942
4023712: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-002-1131

5340-12-315-0666
Pipe Bracket

123150666
0117 5537: RNCC: 3 | RNVC: 2
H3260-C10-10X15/15-DEUTZMVQ1-70: RNCC: 5 | RNVC: 2
K0.00117-5537: RNCC: 5 | RNVC: 2
K0001175537: RNCC: 5 | RNVC: 2
4786723: RNCC: 5 | RNVC: 2

13 Sep 1988

5340-12-387-4832
Rod End Clevis

123874832
DIN71752-G16X32-A3C: RNCC: 2 | RNVC: 2

28 Dec 2011

5340-12-371-3120
Multiple Angle Bracket

123713120
8350-0331: RNCC: 2 | RNVC: 2
8350-0331: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-317-1302
Mounting Plate

123171302
160-26765-11: RNCC: 3 | RNVC: 2
160-26765-11: RNCC: 5 | RNVC: 9

13 Mar 1989

5340-12-315-4144
Mounting Bracket

123154144
4900265-101500.00: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-12-343-1904
Casement Fastener

123431904
9843 6400: RNCC: 3 | RNVC: 2
98436400: RNCC: 5 | RNVC: 2

15 May 1997

5340-12-194-0171
Resilient Mount

121940171
E21-03-60: RNCC: 3 | RNVC: 2
TX3051/06: RNCC: 5 | RNVC: 2
E21-03-60: RNCC: 5 | RNVC: 9

23 Sep 1982

5340-12-337-0412
Plug Button

123370412
81623050029: RNCC: 3 | RNVC: 2
81.62305.0029: RNCC: 5 | RNVC: 2
1692-40-13: RNCC: 5 | RNVC: 2
1692 40 13: RNCC: 5 | RNVC: 2

13 Jan 1995

5340-12-123-4277
Rod End Clevis

121234277
81954500001: RNCC: 3 | RNVC: 2
00003702196: RNCC: 5 | RNVC: 2
00.00370-2196: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-4275
Retaining Strap

123134275
80996020028: RNCC: 3 | RNVC: 2
80.99602.0028: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-12-022-3249

5340-12-357-2155
Mounting Plate

123572155
264865: RNCC: 3 | RNVC: 2
0005220043: RNCC: 5 | RNVC: 2
A0005220043: RNCC: 5 | RNVC: 9

22 May 2002

5340-12-187-5020
Cremone Bolt

121875020
15715: RNCC: 3 | RNVC: 2
DRWG. 15715: RNCC: 5 | RNVC: 9

10 Apr 1981

5340-12-388-5594
Metallic Solid Wheel

123885594
SPK 75K: RNCC: 3 | RNVC: 2
SPK 75K: RNCC: 5 | RNVC: 2

30 Mar 2012

5340-12-305-5539
Spring Tension Clip

123055539
99306201: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-311-6654
Access Cover

123116654
5801669-7300.01: RNCC: 2 | RNVC: 2
5801669-7300.01: RNCC: 3 | RNVC: 2
5801669-7300.01: RNCC: 5 | RNVC: 9

2 Oct 1987

5340-12-167-6865
Dust And Moisture Seal Protective Plug

121676865
0960130000: RNCC: 3 | RNVC: 2

12 Jan 1977

5340-12-199-5085
Rigid Caster

121995085
100429-75000.09.0: RNCC: 2 | RNVC: 2
100429-75000.09.0: RNCC: 3 | RNVC: 2
100429-75000.09.0: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-192-6611
Electrical-Mechanical Equipment Post

121926611
5944251: RNCC: 3 | RNVC: 2
594.4251: RNCC: 5 | RNVC: 2

12 May 1982

5340-12-154-8471
Retaining Strap

121548471
51.2407.000-03: RNCC: 3 | RNVC: 2
51-2407-000-03: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-7036
Retaining Strap

123567036
00426-026-000: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-313-6980
Angle Bracket

123136980
510252-3340.000: RNCC: 3 | RNVC: 2

27 Apr 1988

5340-12-702-2435
Mounting Bracket

127022435
VG95211-ML-127022435: RNCC: 2 | RNVC: 2
30.7712.14: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-351-4166
Nonmetallic Bumper

123514166
10063-000000.14: RNCC: 3 | RNVC: 2
10063-000000.14: RNCC: 5 | RNVC: 9

25 Jul 2000

5340-12-370-7569
Nonmetallic Bumper

123707569
492-188162.011: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-12-350-7615
Mounting Bracket

123507615
504-423010.000: RNCC: 2 | RNVC: 2
9931686: RNCC: 3 | RNVC: 2
504-423010.000: RNCC: 5 | RNVC: 2
9931686: RNCC: 5 | RNVC: 9
504-423010.000: RNCC: 5 | RNVC: 9

17 May 2000

5340-12-389-0720
Expansion Shield

123890720
NO PRIMARY REF 12-389-0720: RNCC: 3 | RNVC: 2
050260: RNCC: 5 | RNVC: 2
050260: RNCC: 5 | RNVC: 2

24 May 2012

5340-12-342-9299
Manual Control Lever

123429299
5011-034: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-378-2848
Spacing Threaded Standoff

123782848
J04823252-028: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-12-393-3863
Lock-Release Lever

123933863
GN300-45-M5-25-SZ: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-12-172-9971
Nonmetallic Bumper

121729971
2300014-262120-08-0: RNCC: 2 | RNVC: 2
2300014-262120-08-0: RNCC: 5 | RNVC: 2
2300014-262120.08.0: RNCC: 5 | RNVC: 9

13 Mar 1978

5340-12-164-1288
Loop Clamp

121641288
DIN3016-1-D2-6-6X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-6-6X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X6/15: RNCC: 3 | RNVC: 2
4219215006: RNCC: 5 | RNVC: 2
RSGU1100-2X6-15: RNCC: 5 | RNVC: 2
RSGU1100.2X6/15: RNCC: 5 | RNVC: 2
DIN3016-D2-6-6X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-388-0335
Butt Hinge Leaf

123880335
2500255-191703.001.0: RNCC: 2 | RNVC: 2
2500255-191703.001.0: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-12-701-6367
Mounting Bracket

127016367
VG95211-ML-127016367: RNCC: 2 | RNVC: 2
5.12.7070.1112.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3352
Rod End Clevis

127013352
VG95211-ML-127013352: RNCC: 2 | RNVC: 2
5.12.5111.0023.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-1983
Mounting Bracket

127011983
VG95211-ML-127011983: RNCC: 2 | RNVC: 2
5.12.0603.0037.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4934
Mounting Bracket

127014934
VG95211-ML-127014934: RNCC: 2 | RNVC: 2
5.12.5850.0601.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-167-0483
Bail Handle

121670483
161-03-521: RNCC: 3 | RNVC: 2
1918-441001-039: RNCC: 5 | RNVC: 2

13 Nov 1976

5340-12-365-6345
Angle Bracket

123656345
J92228079-004: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-360-6768
Mounting Bracket

123606768
J28630005-405: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-12-321-4010
Expansion Plug

123214010
DIN470-45-ST-PHR: RNCC: 2 | RNVC: 2
0630 362 042: RNCC: 3 | RNVC: 2
0630362042: RNCC: 5 | RNVC: 9

16 May 1990

5340-12-366-2937
Manual Control Handle

123662937
60817-129: RNCC: 3 | RNVC: 2
5845-0133: RNCC: 5 | RNVC: 2

6 Apr 2005

5340-12-314-2230
Electrical-Mechanical Equipment Post

123142230
6100127-3200.31: RNCC: 2 | RNVC: 2
VG95148B8XM5X60-2.0380.30-E2A: RNCC: 2 | RNVC: 2
VG95148B8XM5X60-2.0380.30-E2A: RNCC: 3 | RNVC: 2
8793590052: RNCC: 5 | RNVC: 9

17 Jun 1988

5340-12-339-8474
Double Angle Bracket

123398474
702-241930-901-0: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-12-319-3813
Access Hole Frame

123193813
5802006-621000.01: RNCC: 2 | RNVC: 2
5802006-621000.01: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-355-4598
Mounting Plate

123554598
0008570511: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-12-317-1797
Double Angle Bracket

123171797
4602420640: RNCC: 3 | RNVC: 2
4602420540: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-382-2221
Mending Plate

123822221
4100036-981131.002: RNCC: 2 | RNVC: 2
4100036-981131.002: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-317-1978
Mounting Bracket

123171978
3224921819: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-181-3526
Mending Plate

121813526
3531528704: RNCC: 3 | RNVC: 2
35315 28704: RNCC: 5 | RNVC: 9

14 Nov 1979

5340-12-365-0392
Mounting Bracket

123650392
4612810040: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-363-9992
Nonmetallic Bumper

123639992
GSERD2010.15.00.01: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-305-2959
Quick Release Plunger

123052959
1000025-262180: RNCC: 2 | RNVC: 2
1000025-262180: RNCC: 3 | RNVC: 2
1000025-262180: RNCC: 5 | RNVC: 9

18 Oct 1985

5340-12-381-6003
Loop Clamp

123816003
17314892: RNCC: 3 | RNVC: 2

9 Mar 2010

5340-12-391-4282
Mounting Bracket

123914282
I009667TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-179-8382
Mounting Plate

121798382
CF 414 668: RNCC: 3 | RNVC: 2
CF 414 668: RNCC: 3 | RNVC: 2
CF414668: RNCC: 5 | RNVC: 2
CF414668: RNCC: 5 | RNVC: 2
CF 414 668: RNCC: 5 | RNVC: 2
CF414668: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-365-1750
Door Handle

123651750
1102-U2: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-348-6701
Access Cover

123486701
0594701: RNCC: 2 | RNVC: 2
0594701: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-391-5227
Section Block Clamp

123915227
I000778: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-12-367-4404
Loop Clamp

123674404
883 7: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-354-3095
Bridge Clamp

123543095
0008330170: RNCC: 3 | RNVC: 2
A0008330170: RNCC: 5 | RNVC: 2
A 000 833 01 70: RNCC: 5 | RNVC: 9

29 Jun 2001

5340-12-177-5508
Dust And Moisture Seal Protective Cap

121775508
344011888: RNCC: 3 | RNVC: 2

5 Feb 1979

5340-12-364-2476
Mounting Bracket

123642476
4256500261: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-312-1327
Door Holder

123121327
81626706005: RNCC: 3 | RNVC: 2
600837249: RNCC: 3 | RNVC: 2
81.62670.6005: RNCC: 5 | RNVC: 2

25 Nov 1987

5340-12-387-7212
Lock Bolt

123877212
260/J519: RNCC: 3 | RNVC: 2
004011: RNCC: 5 | RNVC: 2

26 Jan 2012

5340-12-344-8639
Mounting Bracket

123448639
5803514-211110.00: RNCC: 2 | RNVC: 2
55.0205.666.00: RNCC: 3 | RNVC: 2
5803514-211110.00: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-333-8709
Access Cover

123338709
405-12: RNCC: 3 | RNVC: 2

18 Feb 1994

5340-12-195-3533
Angle Bracket

121953533
81974860892: RNCC: 3 | RNVC: 2
81.97486-0892: RNCC: 5 | RNVC: 2

9 Feb 1983

5340-12-186-4732
Rigid Caster

121864732
100L55-07-01-10A: RNCC: 2 | RNVC: 2

7 Jan 1981

5340-12-365-0775
Catch Strike

123650775
GLD99-00-116000.11: RNCC: 3 | RNVC: 2

26 Nov 2004

5340-12-158-6731

5340-12-374-5489
Dust And Moisture Seal Boot

123745489
1536410: RNCC: 3 | RNVC: 2

25 Feb 2008

5340-12-360-9342
Manual Control Handle

123609342
12877401: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-300-3121
Lock-Release Lever

123003121
3197660102: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-179-4229
Retaining Strap

121794229
211251269A: RNCC: 3 | RNVC: 9

27 Jun 1979

5340-12-043-7128

5340-12-370-3316
Access Cover

123703316
1215 4495: RNCC: 3 | RNVC: 2
12154495: RNCC: 5 | RNVC: 2

26 Oct 2006

5340-12-357-1339
Mechanic Equipment Hardware Kit

123571339
1120-70074: RNCC: 3 | RNVC: 2

8 May 2002

5340-12-357-1017
Loop Clamp

123571017
EN4114F05WH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-316-6751
Electrical-Mechanical Equipment Post

123166751
5800777-8592.01: RNCC: 2 | RNVC: 2
5800777-8592.01: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-325-4867
Loop Clamp

123254867
60008: RNCC: 3 | RNVC: 2
SCH48: RNCC: 5 | RNVC: 2

10 Jun 1991

5340-12-378-5912
Quick Release Plunger

123785912
03036-06: RNCC: 3 | RNVC: 2
205 07 006: RNCC: 5 | RNVC: 2

23 Apr 2009

5340-12-340-1344
Butt Hinge Leaf

123401344
MZA B3 00: RNCC: 3 | RNVC: 2

2 Mar 1996

5340-12-181-0935
Hand Carrying Strap Assembly

121810935
R20223: RNCC: 3 | RNVC: 2
R20223: RNCC: 5 | RNVC: 9

24 Oct 1979

5340-12-308-6539
Instrument Mounting Clamp

123086539
5664200107: RNCC: 3 | RNVC: 2
05664200107: RNCC: 5 | RNVC: 2
566 4200 107: RNCC: 5 | RNVC: 2
SVSPR4200.107: RNCC: 5 | RNVC: 2

3 Nov 1986

5340-12-197-2141
Leather Strap

121972141
10.206.06.11: RNCC: 2 | RNVC: 2
10.206.06.11: RNCC: 5 | RNVC: 2

29 Sep 1983

5340-12-143-4857

5340-12-360-1517
Spring Tension Clip

123601517
18 693.663: RNCC: 3 | RNVC: 2
9419840761: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-303-9878
Retaining Strap

123039878
K6221: RNCC: 3 | RNVC: 2
KLPKS72.20-1: RNCC: 5 | RNVC: 2

29 May 1985

5340-12-386-0182
Access Cover

123860182
2500262-733000.001.0: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-12-317-6174
Nonmetallic Bumper

123176174
2636506: RNCC: 3 | RNVC: 2
1028.40.10265.4: RNCC: 5 | RNVC: 2
1028.4010265.4: RNCC: 5 | RNVC: 2

21 Apr 1989

5340-12-330-4872
Lock-Release Lever

123304872
6600153-982120.003.0: RNCC: 2 | RNVC: 2
6600153-982120.003.0: RNCC: 3 | RNVC: 2

22 Dec 1992

5340-12-305-3355
Lock-Release Lever

123053355
2.102.00: RNCC: 3 | RNVC: 2

23 Oct 1985

5340-12-354-8083
Manual Control Lever

123548083
03.265.04.02.0: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-314-0525
Double Angle Bracket

123140525
2300109-970100.085.0: RNCC: 2 | RNVC: 2
2300109-970100.085.0: RNCC: 3 | RNVC: 2
1224301: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-12-700-2753
Turnbuckle Body

127002753
51-261232074: RNCC: 2 | RNVC: 2
700.30.440: RNCC: 3 | RNVC: 2
700-30-440: RNCC: 5 | RNVC: 9

26 Nov 1991

5340-12-364-7777
Strap Fastener Loop

123647777
2339-180122A00C: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-362-4765
Mounting Bracket

123624765
0A807.41-01-01-02-012: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-314-7373
Threaded Rod End

123147373
E4782-01-83: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-12-319-4814
Manual Control Lever

123194814
1700013-31910.00: RNCC: 2 | RNVC: 2
297378: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-313-4256
Retaining Strap

123134256
1220000069: RNCC: 3 | RNVC: 2
134/2175-12-00-37: RNCC: 5 | RNVC: 2
3100/2175-12-00-37: RNCC: 5 | RNVC: 9

30 Mar 1988

5340-12-383-6875
Mounting Plate

123836875
ZK.A0084-0500: RNCC: 3 | RNVC: 2

25 Nov 2010

5340-12-319-8598
Mending Plate

123198598
6100125-11100.014: RNCC: 2 | RNVC: 2
4205015247: RNCC: 3 | RNVC: 2

10 Nov 1989

5340-12-306-5993
Access Cover

123065993
4001800-00122: RNCC: 3 | RNVC: 2

13 Mar 1986

5340-12-300-9830
Retaining Strap

123009830
0336 2936: RNCC: 3 | RNVC: 2
3362936EC0150-15: RNCC: 5 | RNVC: 2
3362936: RNCC: 5 | RNVC: 9

14 Sep 1984

5340-12-346-3830
Metallic Bumper

123463830
60 8700 0400 008: RNCC: 3 | RNVC: 2
10654: RNCC: 5 | RNVC: 2
6087000400008: RNCC: 5 | RNVC: 2

21 Jul 1998

5340-12-302-9070
Double Angle Bracket

123029070
5801500573: RNCC: 3 | RNVC: 2

6 Feb 1985

5340-12-322-3446
Mounting Bracket

123223446
43711224-601: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-320-5704
Protection Bellows

123205704
H2254: RNCC: 3 | RNVC: 2
08194507: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-198-4473
Detent Plunger

121984473
3222840148: RNCC: 3 | RNVC: 2

30 Jan 1984

5340-12-146-9552

5340-12-345-3714
Mounting Bracket

123453714
54.0053.247.00: RNCC: 3 | RNVC: 2

10 Mar 1998

5340-12-320-5910
Plug Button

123205910
6209880035: RNCC: 3 | RNVC: 2
620 988 00 35: RNCC: 5 | RNVC: 2

29 Jan 1990

5340-12-300-7043
Dust And Moisture Seal Protective Plug

123007043
0009871344: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-090-6245

5340-12-343-0187
Retaining Strap

123430187
005-009: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-189-3194
Nonmetallic Bumper

121893194
00 45 100: RNCC: 3 | RNVC: 2
0045100: RNCC: 5 | RNVC: 2

17 Sep 1981

5340-12-129-3875

5340-12-310-0148
Resilient Mount

123100148
255158: RNCC: 3 | RNVC: 2

30 Mar 1987

5340-12-352-9903
Mechanical Stop

123529903
VS27.28: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-188-2743
Mending Plate

121882743
1558064: RNCC: 3 | RNVC: 2
75E5.3.65-171: RNCC: 5 | RNVC: 2
75E5-3-65-171: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-334-2867
Loop Clamp

123342867
89 NR.480-0220-11-00-00: RNCC: 3 | RNVC: 2
480-0220-11-00-00-89: RNCC: 5 | RNVC: 2
8652422: RNCC: 5 | RNVC: 2
VG85529-89-1.0038: RNCC: 5 | RNVC: 9

22 Apr 1994

5340-12-338-1197
Mounting Bracket

123381197
VG95211-ML-123381197: RNCC: 2 | RNVC: 2
160-27132: RNCC: 3 | RNVC: 2
160-27132: RNCC: 5 | RNVC: 9

26 May 1995

5340-12-393-8459
Mounting Bracket

123938459
11.44686-0013: RNCC: 3 | RNVC: 2
11.44686-0013: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-354-3495
Section Block Clamp

123543495
JN0413DCE48: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-12-360-0539
Snap-In Hinged Standoff

123600539
01259310: RNCC: 3 | RNVC: 2
05722560: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-12-322-8088
Plain Solid Disk

123228088
8470 032 146: RNCC: 3 | RNVC: 2
8470032146: RNCC: 5 | RNVC: 2
8470032146: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-346-7513
Barrel Bolt

123467513
2043.0101: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-346-7515
Nonmetallic Bumper

123467515
2039.0321: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-179-7628
Mending Plate

121797628
81429400113: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-310-5408
Access Cover

123105408
3609601: RNCC: 3 | RNVC: 2

29 May 1987

5340-12-044-0054

5340-12-372-0459
Mounting Bracket

123720459
S281M3037102: RNCC: 2 | RNVC: 2
S281M3037102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-371-5822
Retaining Bail

123715822
9259113006: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-183-7713
Mounting Bracket

121837713
113201635: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-305-0219
Angle Bracket

123050219
0214 9836: RNCC: 3 | RNVC: 2
02149836KZ0148-20: RNCC: 5 | RNVC: 2

18 Sep 1985

5340-12-134-8144

5340-12-321-2453
Dust And Moisture Seal Protective Plug

123212453
803803583A: RNCC: 3 | RNVC: 2

23 Apr 1990

5340-12-389-4118
Flush Lock

123894118
954260: RNCC: 3 | RNVC: 2

3 Jul 2012

5340-12-044-4533

5340-12-044-1578

5340-12-178-7689
Butt Hinge Leaf

121787689
C324-A16-B30: RNCC: 2 | RNVC: 2
C324A16B30: RNCC: 3 | RNVC: 2
C324-A16-B30: RNCC: 5 | RNVC: 2
C324A16B30: RNCC: 5 | RNVC: 2
C324-A16-B30: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-166-4998
Rod End Connector

121664998
2500045-4001.01: RNCC: 3 | RNVC: 2
2500045-4001-01: RNCC: 5 | RNVC: 9
2500045-4001-01: RNCC: 5 | RNVC: 9
2500045-4001-01: RNCC: 5 | RNVC: 9

16 Sep 1976

5340-12-321-7073
Dust And Moisture Seal Protective Plug

123217073
MB700-100: RNCC: 3 | RNVC: 2
20.0080.0100: RNCC: 5 | RNVC: 2

18 Jun 1990

5340-12-366-9111
Lock-Release Lever

123669111
2300399-182120.000.0: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-701-7576
Mounting Plate

127017576
VG95211-ML-127017576: RNCC: 2 | RNVC: 2
5.12.7617.8400.15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-7656
Retaining Strap

121647656
23302-142000.60: RNCC: 2 | RNVC: 2
8403404: RNCC: 3 | RNVC: 2
0047-269: RNCC: 5 | RNVC: 2
0047269: RNCC: 5 | RNVC: 2
23302-142000.60: RNCC: 5 | RNVC: 9
23302-142000-60: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-150-7618
Nonmetallic Bumper

121507618
100334-1110.21: RNCC: 2 | RNVC: 2
837.100334-1110.21: RNCC: 3 | RNVC: 2
100334-1110-21: RNCC: 3 | RNVC: 2
100334-1110-21: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-4833
Leather Strap

121664833
23111-4228-00: RNCC: 2 | RNVC: 2

15 Sep 1976

5340-12-345-5889
Mounting Bracket

123455889
536514-0202.000: RNCC: 2 | RNVC: 2
536514-0202.000: RNCC: 3 | RNVC: 2
10005780: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-12-185-8285
Sicherungs- Kette

121858285
FE791-11: RNCC: 3 | RNVC: 9
06791011: RNCC: 3 | RNVC: 9

1 Nov 1980

5340-12-367-3960
Butt Hinge

123673960
NO PRIMARY REF 12-367-3960: RNCC: 3 | RNVC: 2
7069376: RNCC: 5 | RNVC: 2

15 Aug 2005

5340-12-314-9161
Electrical-Mechanical Equipment Post

123149161
VG95148B8XM5X26-NRST: RNCC: 2 | RNVC: 2
VG95148B8XM5X26-NRST: RNCC: 3 | RNVC: 2
C121-A44-C114: RNCC: 5 | RNVC: 2

26 Aug 1988

5340-12-358-7810
Mounting Bracket

123587810
J32320325-403: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-338-1073
Access Door

123381073
160-75543: RNCC: 3 | RNVC: 2
15160-75543: RNCC: 5 | RNVC: 2
160-75543: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-357-3458
Access Hole Frame

123573458
8812000042: RNCC: 2 | RNVC: 2
8812000042: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-300-7042
Dust And Moisture Seal Protective Cap

123007042
6018260024: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-302-7040
Helical Compression Spring Retainer

123027040
178.E7.80: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-315-6935
Flush Lock

123156935
SZ2520000: RNCC: 3 | RNVC: 2
SZ2520: RNCC: 5 | RNVC: 2

19 Nov 1988

5340-12-301-1074
Plug Button

123011074
0295 0702: RNCC: 3 | RNVC: 2
2950702EZ0609-98: RNCC: 5 | RNVC: 2

21 Sep 1984

5340-12-356-1494
Latch Bar

123561494
0008372105: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-337-4429
Strap Bolt

123374429
10 0067 384: RNCC: 3 | RNVC: 2
100067381: RNCC: 5 | RNVC: 2
0007430469: RNCC: 5 | RNVC: 2
10 0067 381: RNCC: 5 | RNVC: 2

6 Mar 1995

5340-12-342-8219
Plain Solid Disk

123428219
0009871744: RNCC: 3 | RNVC: 2

8 Apr 1997

5340-12-343-3592
Dust And Moisture Seal Protective Plug

123433592
0009974020: RNCC: 3 | RNVC: 2
1109870544: RNCC: 5 | RNVC: 2

10 Jun 1997

5340-12-371-9786
Access Cover

123719786
5802017-718600.00: RNCC: 2 | RNVC: 2
5802017-718600.00: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-368-6399
Flush Lock

123686399
101799: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-12-345-4813
Helical Compression Spring Seat

123454813
4723433890: RNCC: 3 | RNVC: 2
472.343.38.90: RNCC: 5 | RNVC: 2

24 Mar 1998

5340-12-308-6634
Access Door

123086634
7123901: RNCC: 3 | RNVC: 2
7123902: RNCC: 3 | RNVC: 2

4 Nov 1986

5340-12-357-0019
Nonmetallic Bumper

123570019
521213: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-354-4298
Dust And Moisture Seal Protective Plug

123544298
G60036: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-12-180-0464
Resilient Mount

121800464
3102420113: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-150-0872
Electrical-Mechanical Equipment Post

121500872
BD2E458: RNCC: 3 | RNVC: 9
BD0002E458: RNCC: 5 | RNVC: 2
BD0002E458: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-5466
Mounting Bracket

123585466
5410100240: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-320-1334
Kunst Gleitschiene

123201334
0679201: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-162-8884

5340-12-188-5332
Double Angle Bracket

121885332
03206000: RNCC: 3 | RNVC: 2
03206000.294: RNCC: 5 | RNVC: 9

15 Jul 1981

5340-12-389-5860
Access Cover

123895860
6568291: RNCC: 3 | RNVC: 2

25 Jul 2012

5340-12-044-5821

5340-12-311-3486
Rod End Clevis

123113486
5114210: RNCC: 3 | RNVC: 2

21 Aug 1987

5340-12-320-7337
Double Angle Bracket

123207337
54.0062.982.03: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-149-0897
Retaining Strap

121490897
121G08017: RNCC: 3 | RNVC: 2
28209952725: RNCC: 5 | RNVC: 9
8209952725: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-2920
Friction Catch

123632920
599.076.006.003: RNCC: 3 | RNVC: 2
81971120026: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-305-3587
Retaining Strap

123053587
2142139: RNCC: 3 | RNVC: 2
2142 139: RNCC: 5 | RNVC: 2

25 Oct 1985

5340-12-322-1868
Mending Plate

123221868
40 0176 520: RNCC: 2 | RNVC: 2
40 0176 520: RNCC: 3 | RNVC: 2
40 0176 520: RNCC: 5 | RNVC: 9

31 Jul 1990

5340-12-392-3544
Butt Hinge

123923544
7000141: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-358-7366
Buckle

123587366
P20596NM: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-319-7363
Resilient Mount

123197363
62002: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-12-094-1700

5340-12-123-4011
Retaining Strap

121234011
81974010037: RNCC: 3 | RNVC: 2
81.97401.0037: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-042-0900

5340-12-368-7588
Manual Control Lever

123687588
80510003901: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-12-351-0956
Plug Button

123510956
20100018: RNCC: 3 | RNVC: 2
20100018: RNCC: 5 | RNVC: 2

26 Jun 2000

5340-12-350-8503
Mounting Bracket

123508503
R900856889: RNCC: 3 | RNVC: 2
856889: RNCC: 5 | RNVC: 9

29 May 2000

5340-12-010-4278

5340-12-321-1127
Loop Clamp

123211127
03877700.644: RNCC: 3 | RNVC: 2
03877700: RNCC: 5 | RNVC: 2
47.63.328: RNCC: 5 | RNVC: 2
522.2403: RNCC: 5 | RNVC: 2

28 Mar 1990

5340-12-183-5457
Platte

121835457
CF400657: RNCC: 3 | RNVC: 2
CF 400 657: RNCC: 5 | RNVC: 2
CF400657: RNCC: 5 | RNVC: 2
CF 400 657: RNCC: 5 | RNVC: 2
CF400657: RNCC: 5 | RNVC: 2
CF 400 657: RNCC: 5 | RNVC: 2

26 Apr 1980

5340-12-043-2693

5340-12-309-4015
Nonmetallic Bumper

123094015
1748 254 002: RNCC: 3 | RNVC: 2
0003234985: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-12-309-2653
Double Angle Bracket

123092653
54.0028.614.00: RNCC: 3 | RNVC: 2

7 Jan 1987

5340-12-342-6301
Mounting Bracket

123426301
4618800058: RNCC: 3 | RNVC: 2
461 880 00 58: RNCC: 5 | RNVC: 9

10 Mar 1997

5340-12-176-1949
Loop Clamp

121761949
PAN4231EEF5624: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-122-0372

5340-12-306-6552
Retaining Strap

123066552
A11A 8231 10 150: RNCC: 3 | RNVC: 2
A11A823110150: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-12-358-7908
Mounting Plate

123587908
4376100253: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-322-8805
Nonmetallic Bumper

123228805
790519477: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-12-349-4108
Manual Control Lever

123494108
3093581800: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-043-2653

5340-12-092-0377

5340-12-090-7817

5340-12-353-0306
Dust And Moisture Seal Protective Cover

123530306
1218 9245: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-042-5909

5340-12-130-9205

5340-12-302-6713
Nonmetallic Bumper

123026713
1230013000: RNCC: 3 | RNVC: 2
1230006300: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-357-6155
Dust And Moisture Seal Protective Cap

123576155
0005338831: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-192-2554
Double Angle Bracket

121922554
4044310940: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-12-092-3158

5340-12-320-2404
Double Angle Bracket

123202404
0240 8981: RNCC: 3 | RNVC: 2
02408981EE0147-39: RNCC: 5 | RNVC: 2

21 Dec 1989

5340-12-347-8828
Doorstop

123478828
88.8281.5238: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-361-4327
Mounting Plate

123614327
1504286: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-300-2728
Double Angle Bracket

123002728
160-736605: RNCC: 3 | RNVC: 2
160-736605: RNCC: 5 | RNVC: 9

19 Jul 1984

5340-12-316-0694
Access Cover

123160694
54.0026.701.00: RNCC: 3 | RNVC: 2

20 Dec 1988

5340-12-043-2679

5340-12-388-0049
Webbing Strap

123880049
5803688-101360.00: RNCC: 2 | RNVC: 2
0106.13600.160: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-702-0654
Mounting Bracket

127020654
VG95211-ML-127020654: RNCC: 2 | RNVC: 2
30.0603.120: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-9194
Loop Clamp

127019194
T11-22-15-20 GOST 17679-80: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-8930
Detent Plunger

123008930
1300062-185000.02: RNCC: 2 | RNVC: 2
7835076: RNCC: 3 | RNVC: 2
7835-076: RNCC: 5 | RNVC: 2

11 Sep 1984

5340-12-390-6288
Mounting Plate

123906288
313406: RNCC: 3 | RNVC: 2
5387-06-15-00/37: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-308-9219
Spring Tension Clip

123089219
0415 7058: RNCC: 3 | RNVC: 2
0223 7494: RNCC: 5 | RNVC: 2
02237494EC0150-16: RNCC: 5 | RNVC: 2
04157058EC0150-16: RNCC: 5 | RNVC: 2
2237494: RNCC: 5 | RNVC: 2
2237494: RNCC: 5 | RNVC: 2
3469596-0150-16: RNCC: 5 | RNVC: 2
91501549: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-156-0878
Electrical-Mechanical Equipment Post

121560878
167475801: RNCC: 3 | RNVC: 2
7101-72-57-23: RNCC: 5 | RNVC: 2
7101-72-57.23: RNCC: 5 | RNVC: 2
7101-72-57-23: RNCC: 5 | RNVC: 9
7101-72-57.23: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-2437
Electrical-Mechanical Equipment Post

123282437
4900259-109000-11-02: RNCC: 2 | RNVC: 2
536.50-12.11: RNCC: 3 | RNVC: 2
VS5026E168: RNCC: 5 | RNVC: 2
VS5026E168: RNCC: 5 | RNVC: 9

28 Apr 1992

5340-12-154-6126
Retaining Strap

121546126
8201800445: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-304-4827
Angle Bracket

123044827
2300106-260200.13: RNCC: 2 | RNVC: 2
2300106-260200.13: RNCC: 3 | RNVC: 2
2300106-260200.13: RNCC: 5 | RNVC: 9
2300106-260200.13: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-385-8243
Manual Control Lever

123858243
5240980226: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-12-379-6675
Spring Loaded Cylinder Fastener

123796675
03089-1105: RNCC: 3 | RNVC: 2

20 Aug 2009

5340-12-380-2009
Retaining Strap

123802009
S281M8141101: RNCC: 3 | RNVC: 2

6 Oct 2009

5340-12-189-1837
Retaining Strap

121891837
8379950425: RNCC: 2 | RNVC: 2
8379950425: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-381-2969
Flush Lock

123812969
10020944: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-12-333-1665
Retaining Strap

123331665
5809955968: RNCC: 3 | RNVC: 2
580 995 59 68: RNCC: 5 | RNVC: 2

5 Nov 1993

5340-12-374-2627
Lock Bolt

123742627
L523M1002214: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-309-6730
Double Angle Bracket

123096730
8730810040: RNCC: 2 | RNVC: 2
8730810040: RNCC: 3 | RNVC: 2

16 Feb 1987

5340-12-129-3882

5340-12-331-2094
Mounting Bracket

123312094
1246260042: RNCC: 3 | RNVC: 2

1 Apr 1993

5340-12-199-7954
Webbing Strap

121997954
2996.64.40: RNCC: 3 | RNVC: 2

31 May 1984

5340-12-373-9312
Loop Clamp

123739312
028460015018: RNCC: 3 | RNVC: 2
437962: RNCC: 5 | RNVC: 2

19 Dec 2007

5340-12-309-6821
Rubber Bumper

123096821
18121451996: RNCC: 3 | RNVC: 9

16 Feb 1987

5340-12-010-8513

5340-12-158-6935

5340-12-331-4864
Retaining Strap

123314864
9998145: RNCC: 3 | RNVC: 2
25 031 1000 01 000: RNCC: 5 | RNVC: 2
25 031 1000 01 002: RNCC: 5 | RNVC: 2
25 031 1000 01 001: RNCC: 5 | RNVC: 2

10 May 1993

5340-12-338-0758
Extension Drawer Slide

123380758
30230-403: RNCC: 3 | RNVC: 2

18 May 1995

5340-12-318-5318
Electrical-Mechanical Equipment Post

123185318
200200.1000.005: RNCC: 3 | RNVC: 2
2002.10.00.005: RNCC: 3 | RNVC: 9

24 Jul 1989

5340-12-340-5458
Mounting Bracket

123405458
5900983739: RNCC: 3 | RNVC: 2
5900983739: RNCC: 5 | RNVC: 2
590 098 37 39: RNCC: 5 | RNVC: 2
5900983739: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-362-7658
Nonmetallic Bumper

123627658
S880M00X1008: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-323-1501
Dust And Moisture Seal Protective Plug

123231501
6012020622: RNCC: 3 | RNVC: 2

29 Oct 1990

5340-12-310-8600
Shimmy Damper

123108600
084115: RNCC: 3 | RNVC: 2
0301081615080GDTY: RNCC: 5 | RNVC: 2

2 Jul 1987

5340-12-349-8849
Angle Bracket

123498849
54.1038.130.04: RNCC: 2 | RNVC: 2
54.1038.130.04: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-382-2910
Control Asse Lever

123822910
1023437: RNCC: 3 | RNVC: 2

1 Jun 2010

5340-12-311-8467
Loop Clamp

123118467
LN9490BK10: RNCC: 2 | RNVC: 2
LN9490BR10: RNCC: 5 | RNVC: 2

22 Oct 1987

5340-12-342-8184
Butt Hinge

123428184
39502000: RNCC: 3 | RNVC: 2
DSC 1230: RNCC: 5 | RNVC: 2

7 Apr 1997

5340-12-174-6048
Butt Hinge

121746048
6010146: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-12-305-7235

5340-12-360-7096
Butt Hinge

123607096
000611-239500.11: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-391-1873
Dust And Moisture Seal Protective Cap

123911873
4000004437: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-12-394-5025
Mounting Bracket

123945025
L321M1027101: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-304-7107
Flush Lock

123047107
66738: RNCC: 3 | RNVC: 2
0066738: RNCC: 5 | RNVC: 2

14 Aug 1985

5340-12-184-8884
Handle Grip

121848884
CF406991AR: RNCC: 3 | RNVC: 2
CF 406 991 AR: RNCC: 5 | RNVC: 2
CF 406 991 AR: RNCC: 5 | RNVC: 2
CF406991AR: RNCC: 5 | RNVC: 2

26 Aug 1980

5340-12-199-3962
Ball Socket Seat

121993962
3099910522: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-388-0311
Mechanical Stop

123880311
5840940036: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-12-164-5689

5340-12-349-0793
Angle Bracket

123490793
5801532340: RNCC: 3 | RNVC: 2
580 153 23 40: RNCC: 5 | RNVC: 2

21 Sep 1999

5340-12-004-0520

5340-12-004-2793

5340-12-004-3061

5340-12-391-1866
Swivel Caster

123911866
F11518: RNCC: 3 | RNVC: 2
F11518: RNCC: 5 | RNVC: 2

25 Feb 2013

5340-12-142-8796
Mending Plate

121428796
8380980090: RNCC: 2 | RNVC: 2
8380980090: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-381-8810
Angle Bracket

123818810
000605-201000.07: RNCC: 2 | RNVC: 2
000605-201000.07: RNCC: 3 | RNVC: 2
44153: RNCC: 5 | RNVC: 9

14 Apr 2010

5340-12-378-3854
Mounting Plate

123783854
24860013: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-199-3346
Double Angle Bracket

121993346
6006 300 198: RNCC: 3 | RNVC: 2
6006.300.198: RNCC: 5 | RNVC: 9
6006300198: RNCC: 5 | RNVC: 9

12 Apr 1984

5340-12-356-8137
Helical Compression Spring Retainer

123568137
09435753: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-12-333-5465
Webbing Strap

123335465
2300005-4194.00: RNCC: 2 | RNVC: 2
2300005-4194.00: RNCC: 3 | RNVC: 2
9903534: RNCC: 5 | RNVC: 9
2300005-4194.00: RNCC: 5 | RNVC: 9

4 Jan 1994

5340-12-322-2327
Access Cover

123222327
CF 454 491 AE: RNCC: 2 | RNVC: 2
CF 454 491 AE: RNCC: 3 | RNVC: 2
CF 454 491 AE: RNCC: 5 | RNVC: 2

3 Aug 1990

5340-12-135-6505

5340-12-335-6758
Dust And Moisture Seal Protective Cap

123356758
073-465100-907-0: RNCC: 2 | RNVC: 2
073-465100-907-0: RNCC: 3 | RNVC: 2

12 Sep 1994

5340-12-197-8969
Dust And Moisture Seal Protective Cap

121978969
G-1543676-1: RNCC: 3 | RNVC: 2

30 Nov 1983

5340-12-342-6191
Hand Crank

123426191
0001-171000-909-0: RNCC: 2 | RNVC: 2
0001-171000-909-0: RNCC: 3 | RNVC: 2
0001-171000-909-0: RNCC: 5 | RNVC: 9

7 Mar 1997

5340-12-357-9163
Cushioning Pad

123579163
2300042-255160.002: RNCC: 2 | RNVC: 2
2300042-255160.002: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-195-9226
Butt Hinge

121959226
81626904025: RNCC: 3 | RNVC: 2
81.62690-4025: RNCC: 5 | RNVC: 2
5000253216: RNCC: 5 | RNVC: 2
81.62690.4002: RNCC: 5 | RNVC: 9
81626904002: RNCC: 5 | RNVC: 9
5000253216: RNCC: 5 | RNVC: 9

3 May 1983

5340-12-164-0247
Handwheel

121640247
DIN950-A3-80X10-AL: RNCC: 2 | RNVC: 2
DIN950-A3-80X10-AL: RNCC: 3 | RNVC: 2
A3-80X10DIN950AL: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-5889
Mounting Bracket

121785889
T01.01-06: RNCC: 3 | RNVC: 2
T01-01-06: RNCC: 5 | RNVC: 9
T01.01-06: RNCC: 5 | RNVC: 9

3 May 1979

5340-12-338-3140
Rigid Caster

123383140
143500: RNCC: 3 | RNVC: 2
GBLB6/260 ST: RNCC: 5 | RNVC: 2
120100: RNCC: 5 | RNVC: 9

21 Jun 1995

5340-12-186-4357
Multiple Angle Bracket

121864357
5801225-21000.01: RNCC: 2 | RNVC: 2
5801225-21000.01: RNCC: 3 | RNVC: 2
5801225-21000.01: RNCC: 3 | RNVC: 2
5801225-21000-01: RNCC: 5 | RNVC: 9
5801225-21000.01: RNCC: 5 | RNVC: 9

30 Dec 1980

5340-12-301-2745
Angle Bracket

123012745
2300106-260810.08: RNCC: 2 | RNVC: 2
2300106-260810.08: RNCC: 3 | RNVC: 2
2300106-260810.08: RNCC: 5 | RNVC: 9
2300106-260810.08: RNCC: 5 | RNVC: 9

3 Oct 1984

5340-12-188-3784
Dust And Moisture Seal Protective Cap

121883784
81964100244: RNCC: 3 | RNVC: 2
81.96410.0244: RNCC: 5 | RNVC: 2

6 Jul 1981

5340-12-369-3169
Nut And Bolt Head Protective Cap

123693169
1460505306: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-12-368-6969
Dust And Moisture Seal Protective Cover

123686969
313645: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-12-350-4559
Section Block Clamp

123504559
JN0413J28: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-342-1578
Angle Bracket

123421578
536L02703: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-374-9943
Mounting Bracket

123749943
353 7628-801: RNCC: 3 | RNVC: 2
353 7628-801: RNCC: 5 | RNVC: 2

10 Apr 2008

5340-12-185-8279
Rim Lock

121858279
2603370: RNCC: 3 | RNVC: 9

1 Nov 1980

5340-12-337-4604
Double Angle Bracket

123374604
62910200: RNCC: 3 | RNVC: 2

7 Mar 1995

5340-12-343-5524
Mounting Plate

123435524
56010501010: RNCC: 3 | RNVC: 2
F300 0T 022 5253: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-314-5744
Plain Solid Disk

123145744
313100-010-101: RNCC: 3 | RNVC: 2
0289643340: RNCC: 5 | RNVC: 2
305412-02: RNCC: 5 | RNVC: 2
110 0134: RNCC: 5 | RNVC: 2
313100-01: RNCC: 5 | RNVC: 2
110 0134: RNCC: 5 | RNVC: 2
1100134: RNCC: 5 | RNVC: 2
313100-01: RNCC: 5 | RNVC: 2

20 Jul 1988

5340-12-393-8709
Mounting Bracket

123938709
11.29225-0050: RNCC: 3 | RNVC: 2
11.29225-0050: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-12-180-5601
Dust And Moisture Seal Protective Plug

121805601
TDP687: RNCC: 3 | RNVC: 2
02580668: RNCC: 5 | RNVC: 2
2580668EZ5758-80: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-178-2883
Dust And Moisture Seal Protective Cap

121782883
T12957: RNCC: 3 | RNVC: 2
T12957: RNCC: 5 | RNVC: 9

12 Apr 1979

5340-12-382-3307
Loop Clamp

123823307
5310522: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-330-6241
Lock-Release Lever

123306241
0477 14 684 121: RNCC: 3 | RNVC: 2
0477 14 684 121: RNCC: 5 | RNVC: 9

19 Jan 1993

5340-12-331-8051
Bow Handle

123318051
300000-613000.04: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-313-4604
Handwheel

123134604
2300013-5551.10: RNCC: 2 | RNVC: 2
2300013-5551.10: RNCC: 3 | RNVC: 2
2300013-5551.10: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-329-2165
Lock-Release Lever

123292165
03.265.05.02.0: RNCC: 3 | RNVC: 2
0326505020: RNCC: 5 | RNVC: 2
6.19.007: RNCC: 5 | RNVC: 9
6.19.007.00: RNCC: 5 | RNVC: 9

24 Jul 1992

5340-12-337-9188
Angle Bracket

123379188
G-104942-11-2: RNCC: 3 | RNVC: 2

3 May 1995

5340-12-394-4972
Mounting Bracket

123944972
L321M1816101: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-314-4317
Mounting Bracket

123144317
6454920118: RNCC: 3 | RNVC: 2
645 492 01 18: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-338-1324
Mounting Bracket

123381324
160-75174: RNCC: 3 | RNVC: 2
160-75174: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-340-6191
Handle Grip

123406191
0819 58010 001: RNCC: 3 | RNVC: 2
081958010001: RNCC: 5 | RNVC: 2

14 May 1996

5340-12-342-1575
Mounting Bracket

123421575
536H20506: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-041-2549

5340-12-042-5869

5340-12-176-3867
Leather Strap

121763867
81968015029: RNCC: 3 | RNVC: 2
23230-183855-000-0: RNCC: 5 | RNVC: 9
23230-183855.000.0: RNCC: 5 | RNVC: 9

27 Nov 1978

5340-12-307-0640
Angle Bracket

123070640
P-296883-269: RNCC: 3 | RNVC: 2
P296883-269: RNCC: 5 | RNVC: 2

5 May 1986

5340-12-701-8134
Angle Bracket

127018134
VG95211-ML-127018134: RNCC: 2 | RNVC: 2
5.12.9201.1004.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-143-0731
Nonmetallic Bumper

121430731
2360-240000.10.0: RNCC: 2 | RNVC: 2
C 3695 731: RNCC: 5 | RNVC: 2
C3695731: RNCC: 5 | RNVC: 2
2360-240000.10.0: RNCC: 5 | RNVC: 2
82200-2360-240000.10.0: RNCC: 5 | RNVC: 2
2360-240000-10-0: RNCC: 5 | RNVC: 2
2360-240000.10.0: RNCC: 5 | RNVC: 2
2360-240000-10-0: RNCC: 5 | RNVC: 2
C 3695 731: RNCC: 5 | RNVC: 2
C3695731: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-5642
Access Cover

123545642
4900059-323310.000.0/16: RNCC: 3 | RNVC: 2

3 Aug 2001

5340-12-346-7536
Expansion Plug

123467536
0630 361 083: RNCC: 3 | RNVC: 2
(241)A39630-117483: RNCC: 5 | RNVC: 2
0630361083: RNCC: 5 | RNVC: 9
0-117483: RNCC: 8 | RNVC: 2

7 Sep 1998

5340-12-702-5242
Mounting Plate

127025242
VG95211-ML-127025242: RNCC: 2 | RNVC: 2
5.51.7010.0160.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-310-3662
Retaining Strap

123103662
4.125.01-1501-0003: RNCC: 3 | RNVC: 2

14 May 1987

5340-12-318-0978
Mounting Bracket

123180978
140-113000-001-0: RNCC: 3 | RNVC: 2
57879-760: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-361-9936
Clamping Catch

123619936
V96L01-1-1AG: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-347-5740
Webbing Strap

123475740
5803688-102020.00: RNCC: 2 | RNVC: 2
5803688-102020.00: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-376-0844
Block Clamp

123760844
1535663: RNCC: 3 | RNVC: 2

11 Aug 2008

5340-12-344-2341
Mounting Plate

123442341
1227 9793: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-358-5475
Dust And Moisture Seal Protective Cap

123585475
5411540085: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-319-5034
Retaining Clip

123195034
5801411-81.007: RNCC: 3 | RNVC: 2
5801411-81.007: RNCC: 5 | RNVC: 9

6 Oct 1989

5340-12-322-9740
Dust And Moisture Seal Protective Plug

123229740
484.113: RNCC: 3 | RNVC: 2

12 Oct 1990

5340-12-377-3506
Loop Clamp

123773506
504073261: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-358-7656
Mounting Bracket

123587656
9412604662: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-187-4969
Retaining Clip

121874969
R 624 895: RNCC: 3 | RNVC: 2
624895: RNCC: 5 | RNVC: 9

10 Apr 1981

5340-12-386-2786
Angle Bracket

123862786
5590780341: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-12-090-7288

5340-12-390-8689
Access Cover

123908689
5840310333: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-12-348-6260
Flush Lock

123486260
10001601: RNCC: 2 | RNVC: 2
GZ100016: RNCC: 3 | RNVC: 2
10001601: RNCC: 5 | RNVC: 2

28 Jul 1999

5340-12-392-8719
Mounting Bracket

123928719
L212M4003234: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-316-1167
Mounting Bracket

123161167
251597800001: RNCC: 3 | RNVC: 2
251597800001: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-365-6893
Spring Tension Clip

123656893
0119885778: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-12-329-4968
Handle Grip

123294968
566.10E: RNCC: 3 | RNVC: 2
P009271569847000: RNCC: 5 | RNVC: 2

25 Aug 1992

5340-12-191-9647
Bail Handle

121919647
0156374: RNCC: 3 | RNVC: 2
015.6374: RNCC: 5 | RNVC: 2
KF015.6374: RNCC: 5 | RNVC: 9

17 Mar 1982

5340-12-317-0001
Mounting Bracket

123170001
2300279-5084.00: RNCC: 2 | RNVC: 2
9872088: RNCC: 3 | RNVC: 2
2300279-5084.00: RNCC: 5 | RNVC: 2
2300279-5084.00: RNCC: 5 | RNVC: 9
9872088: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-158-8263
Resilient Mount

121588263
SCHIENE 38537.CR55.ST: RNCC: 3 | RNVC: 2
38537BSMQ5590: RNCC: 3 | RNVC: 2
38537SMQ550: RNCC: 5 | RNVC: 2
1058003000: RNCC: 5 | RNVC: 2
38537,CR55ST: RNCC: 5 | RNVC: 2
07891: RNCC: 5 | RNVC: 2
330307891: RNCC: 5 | RNVC: 2
38537SMQ550: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-0338
Mounting Bracket

123480338
272.411.303: RNCC: 2 | RNVC: 2
272.411.303: RNCC: 3 | RNVC: 2
272.411 303: RNCC: 5 | RNVC: 9
272.411 303: RNCC: 5 | RNVC: 9

30 Mar 1999

5340-12-360-3491
Mounting Bracket

123603491
3515206213: RNCC: 3 | RNVC: 2
3515206213: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-366-7348
Mounting Bracket

123667348
187406804: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-010-2337

5340-12-147-1021
Utility Resilient Mount

121471021
524K08702: RNCC: 3 | RNVC: 2
8392850182: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-125-4398

5340-12-197-0008

5340-12-351-4492
Access Cover

123514492
T311M3233101: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-12-383-0241
Eye Hook

123830241
0704.938-261: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-12-358-7864
Runner

123587864
3826160518: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-192-9452
Sealing Plug Assembly

121929452
0289 1197: RNCC: 3 | RNVC: 2
2891197: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-307-3435
Electrical-Mechanical Equipment Post

123073435
VG95148C5,5XM3X55-ST-ZN: RNCC: 2 | RNVC: 2
VG95148C5,5XM3X55-ST-ZN: RNCC: 3 | RNVC: 2
18H192: RNCC: 3 | RNVC: 2

6 Jun 1986

5340-12-381-1584
Clamping Catch

123811584
6.667-158.0: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-12-316-1195
Mending Plate

123161195
P-M41913-014: RNCC: 3 | RNVC: 2
PM41913-014: RNCC: 5 | RNVC: 2
PM-41913-014: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-330-6069
Mounting Bracket

123306069
630270: RNCC: 3 | RNVC: 2
4.042-237.0: RNCC: 5 | RNVC: 2
4.042-237: RNCC: 5 | RNVC: 9

15 Jan 1993

5340-12-175-6395
Webbing Strap

121756395
23111-4225.00: RNCC: 2 | RNVC: 2
23111-4225.00: RNCC: 3 | RNVC: 2
221-00-406-3: RNCC: 3 | RNVC: 2
23111-4225.00: RNCC: 3 | RNVC: 9
23111-4225-00: RNCC: 5 | RNVC: 2
23111-4225-00: RNCC: 5 | RNVC: 9
23111-4225.00: RNCC: 5 | RNVC: 9
221-00-406-3: RNCC: 5 | RNVC: 9
23111-4225-00: RNCC: 5 | RNVC: 9
983 240-257: RNCC: 5 | RNVC: 9

10 Oct 1978

5340-12-191-0008
Resilient Mount

121910008
1060595903: RNCC: 3 | RNVC: 2
24472/4SM650: RNCC: 5 | RNVC: 2
24472/AUSF4 AUS AUSF2 BSMN65: RNCC: 5 | RNVC: 2
S9/0405 POS. 5: RNCC: 5 | RNVC: 2

5 Jan 1982

5340-12-359-7360
Angle Bracket

123597360
S282M2005206: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-164-4561
Loop Clamp

121644561
3269950101: RNCC: 3 | RNVC: 2
4039950401: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-3922
Double Angle Bracket

123283922
CF 339 049 BU: RNCC: 2 | RNVC: 2
CF 339 049 BU: RNCC: 3 | RNVC: 2
CF 339 049 BU: RNCC: 5 | RNVC: 2

14 May 1992

5340-12-308-4808
Shelf Bracket

123084808
5802017-707310.00: RNCC: 2 | RNVC: 2
5802017-707310.00: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-303-9027
Shimmy Damper

123039027
3729901: RNCC: 3 | RNVC: 2

17 May 1985

5340-12-383-9431
Metallic Solid Wheel

123839431
200 110 030 300: RNCC: 3 | RNVC: 2

27 Dec 2010

5340-12-346-7783
Mending Plate

123467783
2396-292200A03B: RNCC: 3 | RNVC: 2

10 Sep 1998

5340-12-135-6769

5340-12-322-0134
Double Angle Bracket

123220134
027032504: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-304-8263
Permanent Magnet

123048263
1653-4B: RNCC: 3 | RNVC: 2

28 Aug 1985

5340-12-321-9405
Loop Clamp

123219405
4039950701: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-374-6931
Clamping Catch

123746931
504.250C: RNCC: 3 | RNVC: 2

7 Mar 2008

5340-12-309-6850
Spring Holder

123096850
31421450539: RNCC: 3 | RNVC: 9

16 Feb 1987

5340-12-309-6774
Electrical-Mechanical Equipment Post

123096774
0223 7992: RNCC: 3 | RNVC: 2
02237992EE0155-15: RNCC: 5 | RNVC: 2

16 Feb 1987

5340-12-307-3683
Retaining Strap

123073683
4746029: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-309-7772
Access Cover

123097772
6131621: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-309-6619
Access Cover

123096619
272.318 128: RNCC: 2 | RNVC: 2
272.318.128: RNCC: 3 | RNVC: 2
272.318 128: RNCC: 5 | RNVC: 9

13 Feb 1987

5340-12-327-1644
Mounting Bracket

123271644
100013019: RNCC: 3 | RNVC: 2

10 Dec 1991

5340-12-317-6200
Loop Clamp

123176200
3305: RNCC: 3 | RNVC: 2
336753: RNCC: 5 | RNVC: 2
6L.3821.036.00-A002: RNCC: 5 | RNVC: 2

24 Apr 1989

5340-12-301-6765
Mending Plate

123016765
4178930: RNCC: 3 | RNVC: 2
S12B.E03.05.00.064: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-363-8104
Access Cover

123638104
0001312932: RNCC: 3 | RNVC: 2

27 Jul 2004

5340-12-043-2692

5340-12-301-6129
Dust And Moisture Seal Protective Plug

123016129
181941425: RNCC: 3 | RNVC: 2

26 Oct 1984

5340-12-303-2113
Rubber Bumper

123032113
171827379: RNCC: 3 | RNVC: 9

6 Mar 1985

5340-12-186-9978
Spring Tension Clip

121869978
AFG008034: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-090-9986

5340-12-191-5837
Angle Bracket

121915837
4604280740: RNCC: 3 | RNVC: 2

15 Feb 1982

5340-12-301-6908
Escutcheon Plate

123016908
0123 0371: RNCC: 3 | RNVC: 2
01230371: RNCC: 5 | RNVC: 2
1230371EE8929-29: RNCC: 5 | RNVC: 2
N92082C4: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-174-7857
Angle Bracket

121747857
02515224: RNCC: 3 | RNVC: 2
2515224EE5088-55: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-348-0272
Friction Catch

123480272
58674: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-333-6896
Access Cover

123336896
517.017: RNCC: 3 | RNVC: 2
517.017: RNCC: 5 | RNVC: 2

26 Jan 1994

5340-12-308-8247
Access Cover

123088247
0934401: RNCC: 3 | RNVC: 2

20 Nov 1986

5340-12-310-9656
Metal Runner

123109656
272.315 241: RNCC: 2 | RNVC: 2
272.315 241: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-307-2660
Kunst Gleitschiene

123072660
4900238-5800.008: RNCC: 2 | RNVC: 2

28 May 1986

5340-12-348-8696
Mounting Bracket

123488696
4354202286: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-317-9594
Headless Straight Rod

123179594
22012.0.04.000.07: RNCC: 2 | RNVC: 2
22012.0.04.000.07: RNCC: 3 | RNVC: 2

30 May 1989

5340-12-342-5417
Rod End Clevis

123425417
372 954 792: RNCC: 3 | RNVC: 2
372954792(2): RNCC: 5 | RNVC: 2

25 Feb 1997

5340-12-332-5480
Spring Tension Clip

123325480
4H 24: RNCC: 3 | RNVC: 2
4H24: RNCC: 5 | RNVC: 2

19 Aug 1993

5340-12-179-9962
Helical Compression Spring Seat

121799962
4353250026: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-370-6564
Webbing Strap

123706564
01155-1-1100MM: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-12-315-8870
Dust And Moisture Seal Protective Cap

123158870
3104660205: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-345-9299
Retaining Clip

123459299
0009941448: RNCC: 3 | RNVC: 2
A 000 994 14 48: RNCC: 5 | RNVC: 9

18 May 1998

5340-12-145-0066
Rod End Connector

121450066
8ATAN16725: RNCC: 3 | RNVC: 2

30 May 1969

Load More Results