What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 58 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 58 of 178

5340-12-346-6475
Webbing Strap

123466475
2500045-5014.00: RNCC: 2 | RNVC: 2
2500045-5014.00: RNCC: 3 | RNVC: 2
9864025: RNCC: 5 | RNVC: 2
2500045-5014.00: RNCC: 5 | RNVC: 9
9864025: RNCC: 5 | RNVC: 9

20 Aug 1998

5340-12-332-4682
Mounting Bracket

123324682
52002100000001: RNCC: 3 | RNVC: 9

13 Aug 1993

5340-12-332-1611
Dust And Moisture Seal Protective Plug

123321611
00009731860: RNCC: 3 | RNVC: 2
1900508012: RNCC: 5 | RNVC: 2
00009731860: RNCC: 5 | RNVC: 9

22 Jul 1993

5340-12-325-3433
Nonmetallic Bumper

123253433
965403403: RNCC: 3 | RNVC: 2
965403270: RNCC: 5 | RNVC: 2

28 May 1991

5340-12-350-3400
Mechanical Stop

123503400
2996.10.97: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-193-8145
Hinge Torsion Bar

121938145
1091350.01: RNCC: 3 | RNVC: 2

2 Sep 1982

5340-12-390-2473
Mounting Bracket

123902473
315333: RNCC: 3 | RNVC: 2

22 Oct 2012

5340-12-373-6192
Angle Bracket

123736192
8802372140: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-12-320-4236
Mounting Bracket

123204236
130583210: RNCC: 3 | RNVC: 2
3666 0583 210: RNCC: 5 | RNVC: 2

12 Jan 1990

5340-12-381-7103
Swivel Caster

123817103
LS-VLE 255K: RNCC: 3 | RNVC: 2
297473: RNCC: 5 | RNVC: 2

19 Mar 2010

5340-12-305-5667
Bridge Clamp

123055667
4063250326: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-165-6836
Retaining Band

121656836
M3: RNCC: 3 | RNVC: 2

15 Jun 1976

5340-12-346-7524
Permanent Magnet

123467524
3016.1409: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-136-1901
Elek Gewindezapfen

5340-12-138-0192
Anschlag Scharnier

5340-12-138-1265
Anschlag Scharnier

5340-12-360-1755
Latch Bar

123601755
9417230269: RNCC: 3 | RNVC: 2

14 Apr 2003

5340-12-328-3835
Detent Plunger

123283835
173748: RNCC: 2 | RNVC: 2
173748: RNCC: 3 | RNVC: 2

13 May 1992

5340-12-393-4005
Dust And Moisture Seal Protective Cap

123934005
119209: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-352-2729
Loop Clamp

123522729
3102490: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-325-6544
Angle Bracket

123256544
3055420440: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-367-9534
Retaining Clip

123679534
4607430333: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-374-3639
Manual Control Lever

123743639
3NG2392198B: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-12-374-2889
Mechanical Stop

123742889
5307675: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-372-9142
Sliding Door Track

123729142
L521M3806105: RNCC: 3 | RNVC: 2

5 Sep 2007

5340-12-309-7923
Access Cover

123097923
5058882: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-375-6511
Mounting Bracket

123756511
9009203A: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-12-137-6029

5340-12-327-5164
Runner

123275164
9000 1146: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-12-336-7086
Retaining Strap

123367086
8403566: RNCC: 3 | RNVC: 2

12 Dec 1994

5340-12-027-0483

5340-12-316-2892
Handle Grip

123162892
6189976: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-356-4543
Pad Eye

123564543
P70157102001: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-359-1392
Nonmetallic Bumper

123591392
6254910085: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-12-375-1200
Angle Bracket

123751200
947143477: RNCC: 3 | RNVC: 2

23 Apr 2008

5340-12-365-1592
Loop Clamp

123651592
21115040: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-360-4800
Mounting Bracket

123604800
1644465509: RNCC: 3 | RNVC: 2
1644465509: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-317-3575
Access Cover

123173575
0241 5872: RNCC: 3 | RNVC: 2

31 Mar 1989

5340-12-358-5465
Access Cover

123585465
5410100235: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-334-5580
Access Cover

123345580
345071: RNCC: 3 | RNVC: 2

24 May 1994

5340-12-044-4151

5340-12-133-6803

5340-12-389-5580
Spring Tension Clip

123895580
020306100: RNCC: 3 | RNVC: 2
0129884678: RNCC: 5 | RNVC: 2

19 Jul 2012

5340-12-347-1841
Mechanical Stop

123471841
T561M10X1218: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-12-367-6918
Mounting Bracket

123676918
0003513: RNCC: 3 | RNVC: 2
0003513EINZELN: RNCC: 5 | RNVC: 2

27 Sep 2005

5340-12-135-7127

5340-12-043-3016

5340-12-335-0746
Angle Bracket

123350746
0048-208000A02B: RNCC: 2 | RNVC: 2
0048-208000A02B: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-12-323-7348
Bow Handle

123237348
265.88: RNCC: 3 | RNVC: 2
265.88: RNCC: 5 | RNVC: 2

12 Dec 1990

5340-12-370-5500
Angle Bracket

123705500
6204923941: RNCC: 3 | RNVC: 2
620 492 39 41: RNCC: 5 | RNVC: 2

21 Nov 2006

5340-12-361-7848
Support Hook

123617848
2850.00.06: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-360-0744
Butt Hinge

123600744
9417200037: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-177-9572
Access Cover

121779572
81614460009: RNCC: 3 | RNVC: 2

9 Mar 1979

5340-12-345-6431
Mounting Plate

123456431
227759-3001: RNCC: 3 | RNVC: 2
(241)A39630-119872: RNCC: 5 | RNVC: 2
2277593001: RNCC: 5 | RNVC: 2

7 Apr 1998

5340-12-358-6147
Bail Handle

123586147
481-200587: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-351-3615
Access Cover

123513615
72.012-113: RNCC: 3 | RNVC: 2

18 Jul 2000

5340-12-702-2332
Mounting Bracket

127022332
VG95211-ML-127022332: RNCC: 2 | RNVC: 2
30.7701.330: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-153-1821
Loop Clamp

121531821
E59-085ANDE40-626ANDE42-611: RNCC: 3 | RNVC: 2
S000651102000000: RNCC: 5 | RNVC: 2
0651102000: RNCC: 5 | RNVC: 2
59-085AND40-626AND42-611: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-1764
Mounting Bracket

127011764
VG95211-ML-127011764: RNCC: 2 | RNVC: 2
5.12.0246.0210.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-9680
Antipilferage Seal Locking Wire

127009680
VG95211-ML-127009680: RNCC: 2 | RNVC: 2
3 OST1 10067-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-1328
Angle Bracket

121771328
5800826-02-008: RNCC: 3 | RNVC: 2
5800826-02.008: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-163-1809
Mending Plate

121631809
03497900: RNCC: 3 | RNVC: 2
03497900-274: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-8715
Expansion Shield

123298715
4-127-0031: RNCC: 3 | RNVC: 2

8 Oct 1992

5340-12-361-4302
Access Cover

123614302
5981-205340.000.0: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-149-3725
Resilient Mount

121493725
A45X30M10X26-20NE40WNB611: RNCC: 3 | RNVC: 2
A45X30M10X26-20NE40: RNCC: 5 | RNVC: 2
6116081: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-181-3616
Angle Bracket

121813616
SH9500E546: RNCC: 3 | RNVC: 2
SH9500E546: RNCC: 3 | RNVC: 9
1200072-013509-546: RNCC: 5 | RNVC: 9
1200072-013509.546: RNCC: 5 | RNVC: 9
SH9500E546: RNCC: 5 | RNVC: 9

19 Nov 1979

5340-12-326-4795
Mounting Bracket

123264795
6100131-110720: RNCC: 2 | RNVC: 2

23 Sep 1991

5340-12-186-8758
Strap Fastener Loop

121868758
431271224620: RNCC: 3 | RNVC: 2
43127122462: RNCC: 5 | RNVC: 2
5801796-141000-01: RNCC: 5 | RNVC: 9
5801796-141000.01: RNCC: 5 | RNVC: 9

16 Feb 1981

5340-12-183-8563
Mounting Bracket

121838563
1000025-260670.01: RNCC: 3 | RNVC: 2
1000025-260670.01: RNCC: 5 | RNVC: 9
1000025-260670-01: RNCC: 5 | RNVC: 9
1000025-260670-01: RNCC: 5 | RNVC: 9

24 May 1980

5340-12-335-2160
Extension Drawer Slide

123352160
69 000-745: RNCC: 3 | RNVC: 2
100-320-002: RNCC: 5 | RNVC: 2

27 Jul 1994

5340-12-342-9260
Friction Catch Stud

123429260
VG95211-ML-123429260: RNCC: 2 | RNVC: 2
000000-0106.941: RNCC: 3 | RNVC: 2
000000-0106.941: RNCC: 5 | RNVC: 2
000000-0106.941: RNCC: 5 | RNVC: 9

16 Apr 1997

5340-12-178-8050
Angle Bracket

121788050
C106-A44-C34: RNCC: 2 | RNVC: 2
C106A44C34: RNCC: 3 | RNVC: 2
C106-A44-C34: RNCC: 5 | RNVC: 2
C106A44C34: RNCC: 5 | RNVC: 2
C106-A44-C34: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-155-4512
Rod End Clevis

121554512
160-71047-05: RNCC: 3 | RNVC: 2
160-71047-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-0623
Dust And Moisture Seal Protective Cap

123900623
118528: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-387-6504
Mounting Bracket

123876504
40032933: RNCC: 2 | RNVC: 2
40032933: RNCC: 3 | RNVC: 2
60124099: RNCC: 5 | RNVC: 2

19 Jan 2012

5340-12-349-7647
Liquid Holding Unit Filler Neck

123497647
741082: RNCC: 3 | RNVC: 2
741 082: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-385-7845
Manual Control Handle

123857845
4612600040: RNCC: 3 | RNVC: 2
21000298AA000: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-12-358-2486
Mounting Bracket

123582486
3954020040: RNCC: 3 | RNVC: 2

1 Oct 2002

5340-12-373-9052
Lock-Release Lever

123739052
5544653: RNCC: 2 | RNVC: 2
5544653: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-12-320-4404
Dust And Moisture Seal Protective Plug

123204404
620U22B: RNCC: 3 | RNVC: 2
620U22B: RNCC: 5 | RNVC: 2
GPN620,U22B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-331-8455
Casement Fastener

123318455
9227A35A3: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-12-197-0935
Nonmetallic Bumper

121970935
4357477092: RNCC: 3 | RNVC: 2

19 Sep 1983

5340-12-173-0397
Door Handle

121730397
5800176: RNCC: 3 | RNVC: 2
580K0264: RNCC: 5 | RNVC: 2
100061191: RNCC: 5 | RNVC: 2
4377075: RNCC: 5 | RNVC: 2
0007430172: RNCC: 5 | RNVC: 2

15 Mar 1978

5340-12-196-4352
Angle Bracket

121964352
62.6890.200.05-A001: RNCC: 3 | RNVC: 2
283984: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-301-7692
Nonmetallic Bumper

123017692
4179166: RNCC: 3 | RNVC: 2
S12B.K05.00.00.018: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-312-4464
Helical Compression Spring Seat

123124464
1152773136: RNCC: 3 | RNVC: 2

8 Jan 1988

5340-12-373-0797
Mounting Plate

123730797
DKAE045: RNCC: 3 | RNVC: 2

25 Sep 2007

5340-12-192-6551
Flare Lock Fastener

121926551
7820211650: RNCC: 3 | RNVC: 2
78202 11650: RNCC: 5 | RNVC: 9

12 May 1982

5340-12-304-0562
Sealing Plug Assembly

123040562
RP964854: RNCC: 3 | RNVC: 2

4 Jun 1985

5340-12-323-9649
Metallic Bumper

123239649
2300074-991300.08: RNCC: 2 | RNVC: 2
2300074-991300.08: RNCC: 5 | RNVC: 2
2300074-991300.08: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-363-2995
Snap Hook

123632995
TL8465-0032-28: RNCC: 2 | RNVC: 2
M73: RNCC: 3 | RNVC: 2

20 May 2004

5340-12-198-9955
Dust And Moisture Seal Protective Cap

121989955
2029880035: RNCC: 3 | RNVC: 2

20 Mar 1984

5340-12-196-6527
Retaining Strap

121966527
0289 3344: RNCC: 3 | RNVC: 2
2893344: RNCC: 5 | RNVC: 2

27 Jul 1983

5340-12-194-0435
Butt Hinge Leaf

121940435
4217230151: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-163-7416
Loop Clamp

121637416
LN9491BM40: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-183-8092
Retaining Band

121838092
113903141B: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-309-4701
Retaining Strap

123094701
AFG0348458: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-12-090-6501

5340-12-330-3147
Retaining Strap

123303147
A11A742420122N1: RNCC: 3 | RNVC: 2

1 Dec 1992

5340-12-317-2979
Double Angle Bracket

123172979
3227510151: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-332-2536
Nonmetallic Bumper

123322536
1H4831505: RNCC: 3 | RNVC: 9

26 Jul 1993

5340-12-352-2282
Angle Bracket

123522282
5062230141: RNCC: 3 | RNVC: 2
506 223 01 41: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-366-9732
Mounting Bracket

123669732
2300421-960627.000: RNCC: 2 | RNVC: 2
2300421-960627.000: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-329-7703
Mounting Bracket

123297703
4064200168: RNCC: 3 | RNVC: 2

25 Sep 1992

5340-12-320-1773
Webbing Strap

123201773
7300037-70: RNCC: 2 | RNVC: 2
7300037-70: RNCC: 3 | RNVC: 2
TL 7320-0064 LFD. NR. 12: RNCC: 5 | RNVC: 2

14 Dec 1989

5340-12-357-5720
Mounting Plate

123575720
3860-000000-10: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-386-4621
Angle Bracket

123864621
009-221.120-014: RNCC: 3 | RNVC: 2

2 Sep 2011

5340-12-340-8190
Mounting Bracket

123408190
23-120-JN-61: RNCC: 3 | RNVC: 2

19 Jun 1996

5340-12-197-8308
Bow Handle

121978308
C22300-A154-C12: RNCC: 3 | RNVC: 2

25 Nov 1983

5340-12-327-8038
Pipe Hanger

123278038
38012-043099: RNCC: 2 | RNVC: 2
38012-043099: RNCC: 3 | RNVC: 2
38012-043099: RNCC: 5 | RNVC: 9

6 Mar 1992

5340-12-354-8340
Caster Frame

123548340
5400049-116811.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-700-2762
Manual Control Lever

127002762
51-270447034: RNCC: 2 | RNVC: 2
765-65-SB343: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-12-702-2227
Mounting Bracket

127022227
VG95211-ML-127022227: RNCC: 2 | RNVC: 2
30.7601.400: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-179-1948
Mounting Bracket

121791948
NO PRIMARY REF 12-179-1948: RNCC: 3 | RNVC: 2
0039883578: RNCC: 5 | RNVC: 2
200105: RNCC: 5 | RNVC: 9

15 Jun 1979

5340-12-339-0570
Catch Strike

123390570
DIN3133-G15X45BK: RNCC: 2 | RNVC: 2
C15-01G2: RNCC: 3 | RNVC: 2

5 Oct 1995

5340-12-148-9290
Spring Tension Clip

121489290
23176-262383.02.0: RNCC: 2 | RNVC: 2
23176-262383.02.0: RNCC: 3 | RNVC: 2
23176-262383-02-0: RNCC: 5 | RNVC: 9
23176-262383.02.0: RNCC: 5 | RNVC: 9
23176-262383-02-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7001
Angle Bracket

127017001
VG95211-ML-127017001: RNCC: 2 | RNVC: 2
5.12.7230.2080.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-152-4947
Dust And Moisture Seal Protective Cap

121524947
6690006-250-09: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-199-4807
Nut And Bolt Retainer

121994807
320308-03: RNCC: 3 | RNVC: 2
320 308 03: RNCC: 5 | RNVC: 2
1100111: RNCC: 5 | RNVC: 2

28 Apr 1984

5340-12-330-0947
Butt Hinge Leaf

123300947
VG95211-ML-123300947: RNCC: 2 | RNVC: 2
65200-09004Y104: RNCC: 3 | RNVC: 2
65200-09004Y104: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-12-338-2060
Mending Plate

123382060
706-133300-957-0: RNCC: 3 | RNVC: 2

6 Jun 1995

5340-12-368-1375
Hand Crank

123681375
2300211-182360.000.0: RNCC: 2 | RNVC: 2
2300211-182360.000.0: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-330-2425
Access Cover

123302425
CH18425: RNCC: 3 | RNVC: 2
CH18425: RNCC: 5 | RNVC: 9

20 Nov 1992

5340-12-374-2510
Strap Hinge

123742510
L533M1143209: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-321-4092
Electrical-Mechanical Equipment Post

123214092
3610.100.03: RNCC: 3 | RNVC: 2
102571: RNCC: 5 | RNVC: 2

16 May 1990

5340-12-311-9587
Ball Socket Seat

123119587
162438: RNCC: 3 | RNVC: 2
162438: RNCC: 5 | RNVC: 9

5 Nov 1987

5340-12-353-7636
Mounting Bracket

123537636
16001487: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-040-1374

5340-12-041-0857

5340-12-354-4294
Mounting Plate

123544294
E20931: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-12-329-6194
Lock-Release Lever

123296194
8100211-212000-00-00: RNCC: 2 | RNVC: 2
ZG5043G030: RNCC: 3 | RNVC: 2
ZG5043G030: RNCC: 5 | RNVC: 9

9 Sep 1992

5340-12-339-0212
Handle Grip

123390212
080510 2208: RNCC: 3 | RNVC: 2
0008610175: RNCC: 5 | RNVC: 2
30.40.080.01: RNCC: 5 | RNVC: 2
304008001: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-385-4795
Mounting Bracket

123854795
X59499100361: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-12-311-5254
Angle Bracket

123115254
2300227-317000.000: RNCC: 2 | RNVC: 2
2300227-317000.000: RNCC: 3 | RNVC: 2
2300227-317000.000: RNCC: 5 | RNVC: 9

14 Sep 1987

5340-12-360-4097
Manual Control Lever

123604097
0009025184: RNCC: 3 | RNVC: 2
0009025184: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-384-4565
Mending Plate

123844565
2332983000: RNCC: 3 | RNVC: 2
2332984000: RNCC: 5 | RNVC: 2
24027: RNCC: 5 | RNVC: 2

24 Feb 2011

5340-12-360-7082
Mounting Bracket

123607082
000611-245100.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-144-8633
Butt Hinge Leaf

121448633
LN9172AF30: RNCC: 2 | RNVC: 2
A15X30LN9172: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-043-2676

5340-12-325-6898
Double Angle Bracket

123256898
3634311740: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-12-135-6510

5340-12-010-8647

5340-12-319-7794
Loop Clamp

123197794
6419970190: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-12-393-7708
Retaining Clip

123937708
236670: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-190-6418
Nonmetallic Bumper

121906418
2420026001: RNCC: 3 | RNVC: 2

7 Dec 1981

5340-12-308-2553
Gummi- Riemen

123082553
5800043-2511.00: RNCC: 2 | RNVC: 2
82300-5800043-2511.00: RNCC: 3 | RNVC: 2
5800043-2511.00: RNCC: 3 | RNVC: 2
5800043-2511.00: RNCC: 5 | RNVC: 9

19 Sep 1986

5340-12-701-6153
Mounting Bracket

127016153
VG95211-ML-127016153: RNCC: 2 | RNVC: 2
5.12.7010.1630.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-173-6611
Double Angle Bracket

121736611
4064280040: RNCC: 3 | RNVC: 2

28 Apr 1978

5340-12-183-1753
Mounting Bracket

121831753
214G16G2: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-162-9599
Mending Plate

121629599
5900780941: RNCC: 3 | RNVC: 2
5900780941: RNCC: 5 | RNVC: 2
5900780941: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-4629
Retaining Strap

121644629
23290-182000.009: RNCC: 2 | RNVC: 2
23290-182000.009: RNCC: 3 | RNVC: 2
23290-182000-009: RNCC: 5 | RNVC: 9
23290-182000.009: RNCC: 5 | RNVC: 9
23290-182000.009: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-3995
Mending Plate

121723995
1361035-21400-01: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-12-145-9872
Nonmetallic Bumper

121459872
75-06061-00: RNCC: 3 | RNVC: 2
837-7X4-PUR60: RNCC: 3 | RNVC: 2
0B6061: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-1761
Angle Bracket

123581761
2500261-060000.010.0: RNCC: 2 | RNVC: 2
2500261-060000.010.0: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-139-7013
Butt Hinge Leaf

121397013
REL11-554: RNCC: 3 | RNVC: 2
REL11-554: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-306-6614
Angle Bracket

123066614
704-152300-904-0: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-340-6907
Nonmetallic Bumper

123406907
704-180120-908-0: RNCC: 3 | RNVC: 2

23 May 1996

5340-12-701-3150
Rod End Connector

127013150
VG95211-ML-127013150: RNCC: 2 | RNVC: 2
5.12.5101.8000.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-6384
Mounting Bracket

123216384
217158-1000: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-157-9876
Angle Bracket

121579876
AZ0148521: RNCC: 3 | RNVC: 2
GZ12-30: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-3274
Double Angle Bracket

123223274
65.7059.600.02A001: RNCC: 3 | RNVC: 2
65-7059-600-02A001: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-193-9841
Electrical-Mechanical Equipment Post

121939841
VG95148B5XM2,5X12-AL: RNCC: 2 | RNVC: 2
VG95148B5XM2,5X12-AL: RNCC: 3 | RNVC: 2
MB0882210: RNCC: 3 | RNVC: 2
MB 088.2210: RNCC: 5 | RNVC: 2

21 Sep 1982

5340-12-330-8800
Nonmetallic Bumper

123308800
480-7347-10-00-14: RNCC: 3 | RNVC: 2
480/7347-10-00-14: RNCC: 5 | RNVC: 2

18 Feb 1993

5340-12-345-8865
Angle Bracket

123458865
5803583-201100.00: RNCC: 2 | RNVC: 2
55.0208.007.00: RNCC: 3 | RNVC: 2
5803583-201100.00: RNCC: 5 | RNVC: 2

12 May 1998

5340-12-189-7607
Lock-Release Lever

121897607
0000463101-08-09: RNCC: 3 | RNVC: 2
M260000463101-08-09: RNCC: 5 | RNVC: 2
M260000463101-08-09: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-701-5579
Mounting Plate

127015579
VG95211-ML-127015579: RNCC: 2 | RNVC: 2
5.12.6113.8090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-4791
Mending Plate

121744791
0287 2257: RNCC: 3 | RNVC: 2
2872257: RNCC: 5 | RNVC: 2
2872257EE0603-21: RNCC: 5 | RNVC: 2

3 Jul 1978

5340-12-176-9801
Angle Bracket

121769801
81974850686: RNCC: 3 | RNVC: 2

3 Jan 1979

5340-12-349-7695
Angle Bracket

123497695
81252450131: RNCC: 3 | RNVC: 2
81.25245.0131: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-044-5669

5340-12-040-1052

5340-12-333-2110
Double Angle Bracket

123332110
81429025161: RNCC: 2 | RNVC: 2
81429025161: RNCC: 3 | RNVC: 2
81.42902.5161: RNCC: 5 | RNVC: 2

10 Nov 1993

5340-12-308-6100
Flare Lock Fastener

123086100
20H622: RNCC: 3 | RNVC: 2
20H622: RNCC: 3 | RNVC: 2

28 Oct 1986

5340-12-367-6198
Mounting Bracket

123676198
2309244001: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-12-309-7920
Access Cover

123097920
3017237: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-163-9754
Loop Clamp

121639754
HP8N: RNCC: 3 | RNVC: 2
0158819: RNCC: 5 | RNVC: 2
ZBS5012: RNCC: 5 | RNVC: 2
HP8N: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-040-1503

5340-12-170-5730
Webbing Strap

121705730
6030014: RNCC: 3 | RNVC: 2
519600: RNCC: 5 | RNVC: 2
39648: RNCC: 5 | RNVC: 2

20 Jul 1977

5340-12-330-8935
Mounting Bracket

123308935
537172-8228.000: RNCC: 2 | RNVC: 2
537172-8228.000: RNCC: 3 | RNVC: 2
537172-8228.000: RNCC: 5 | RNVC: 9

19 Feb 1993

5340-12-376-8742
Abdeckung

123768742
0008310541: RNCC: 3 | RNVC: 2
0008300034: RNCC: 5 | RNVC: 9

14 Nov 2008

5340-12-317-9611
Mounting Bracket

123179611
7113102: RNCC: 3 | RNVC: 2

30 May 1989

5340-12-320-1326
Mounting Bracket

123201326
0893901: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-188-0151
Dust And Moisture Seal Protective Cap

121880151
01TC33155: RNCC: 3 | RNVC: 2

27 May 1981

5340-12-176-1946
Loop Clamp

121761946
PAN4231CMG6634: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-198-3948
Dust And Moisture Seal Protective Plug

121983948
2433924709: RNCC: 3 | RNVC: 2
5800401-8343.016: RNCC: 5 | RNVC: 2
24339 24709: RNCC: 5 | RNVC: 9

24 Jan 1984

5340-12-317-2967
Retaining Strap

123172967
1369950135: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-163-5061
Loop Clamp

121635061
4039950301: RNCC: 3 | RNVC: 2
4039950301: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-7332
Access Cover

123507332
13258501: RNCC: 3 | RNVC: 2

12 May 2000

5340-12-171-9584
Loop Clamp

121719584
81669156009: RNCC: 3 | RNVC: 2
81.66915-6009: RNCC: 5 | RNVC: 2
81.66915.6009: RNCC: 5 | RNVC: 2
23230-172476.000.0: RNCC: 5 | RNVC: 9
23230-172476-000-0: RNCC: 5 | RNVC: 9
23230-172476.000.0: RNCC: 5 | RNVC: 9

5 Dec 1977

5340-12-345-4495
Lock Key

123454495
P70085-416701: RNCC: 3 | RNVC: 9

17 Mar 1998

5340-12-315-5302
Access Cover

123155302
5803471-201323.01: RNCC: 2 | RNVC: 2
65.7789.427.01-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-316-7047
Extension Drawer Slide

123167047
GM305-559: RNCC: 3 | RNVC: 2
42-0012: RNCC: 5 | RNVC: 2

2 Feb 1989

5340-12-701-9715
Angle Bracket

127019715
VG95211-ML-127019715: RNCC: 2 | RNVC: 2
02.7607.270: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-393-5156
Mending Plate

123935156
2500255-190000.004.0: RNCC: 2 | RNVC: 2
2500255-190000.004.0: RNCC: 3 | RNVC: 2

20 Sep 2013

5340-12-188-9163
Helical Compression Spring Seat

121889163
5801433-060000.03.0: RNCC: 3 | RNVC: 2
5801433-060000-03-0: RNCC: 5 | RNVC: 2
5801433-060000.03.0: RNCC: 5 | RNVC: 9
5801433-060000-03-0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-309-2278
Mending Plate

123092278
P-896358-003: RNCC: 3 | RNVC: 2
P896358-003: RNCC: 5 | RNVC: 2

29 Dec 1986

5340-12-389-0963
Mending Plate

123890963
1187194: RNCC: 3 | RNVC: 2
H1.1784-47-01-00.00-06: RNCC: 5 | RNVC: 2

25 May 2012

5340-12-183-6358
Helical Compression Spring Seat

121836358
42009785: RNCC: 3 | RNVC: 2
42009785EE5041-04: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-124-1202
Rod End Clevis

121241202
DIN71752-G12X24-9SMNPB28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G12X24-10S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G12X24-9SMN28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G12X24-10S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G12X24-10S20K-A3P: RNCC: 3 | RNVC: 2
100200120024/024-10S20K: RNCC: 5 | RNVC: 2
071752012005: RNCC: 5 | RNVC: 2
G12X24DIN71752-10S20K: RNCC: 5 | RNVC: 2
DIN71752-G12X24-10S20K: RNCC: 5 | RNVC: 9
G12X24DIN71752-10S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-385-2545
Manual Control Lever

123852545
F1.1787-30-20-10.00-00: RNCC: 3 | RNVC: 2

13 May 2011

5340-12-196-8556
Dust And Moisture Seal Protective Cap

121968556
025-8636-029: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-377-5826
Dust And Moisture Seal Protective Cap

123775826
9HB408377-00: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-12-182-0170
Electrical-Mechanical Equipment Post

121820170
3415528712: RNCC: 3 | RNVC: 2
5801506-1000-018: RNCC: 5 | RNVC: 2
5801506-1000-018: RNCC: 5 | RNVC: 9
34155 28712: RNCC: 5 | RNVC: 9

7 Jan 1980

5340-12-701-9025
Loop Clamp

127019025
VG95211-ML-127019025: RNCC: 2 | RNVC: 2
N1119-417: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-2121
Loop Clamp

123552121
JN0210-20: RNCC: 3 | RNVC: 2

23 Oct 2001

5340-12-310-0087
Electrical-Mechanical Equipment Post

123100087
0224 3578: RNCC: 3 | RNVC: 2
02243578EE0155-57: RNCC: 5 | RNVC: 2
2243578: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-701-6443
Angle Bracket

127016443
VG95211-ML-127016443: RNCC: 2 | RNVC: 2
5.12.7204.0560.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-0999
Mending Plate

123180999
140-610000-901-0: RNCC: 3 | RNVC: 2
66965-635: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-322-4855
Mending Plate

123224855
C249-A32-C62: RNCC: 2 | RNVC: 2
C249-A32-C62: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-199-8756
Mending Plate

121998756
408-00.08.571-20: RNCC: 3 | RNVC: 2
408-00-08-571-20: RNCC: 5 | RNVC: 2
408-00.08.571-20: RNCC: 5 | RNVC: 9

9 Jun 1984

5340-12-302-0960
Pad Eye

123020960
9840366: RNCC: 3 | RNVC: 2
2300164-291010-016: RNCC: 5 | RNVC: 9
2300164-291010.016: RNCC: 5 | RNVC: 9
9840366: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-12-144-4576
Loop Clamp

121444576
RSIM46-20/12: RNCC: 3 | RNVC: 2
0009950536: RNCC: 5 | RNVC: 2
4417006046: RNCC: 5 | RNVC: 2
RSIM46-20-12: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-9554
Loop Clamp

123309554
480-7346-02-12-00: RNCC: 3 | RNVC: 2
480/7346-02-12-00: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-12-344-5889
Pad Eye

123445889
5803513-000000.02: RNCC: 2 | RNVC: 2
55.0205.310.02: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-173-8047
Webbing Strap

121738047
8475452: RNCC: 3 | RNVC: 2
8207-902: RNCC: 5 | RNVC: 2
8207902: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-196-4949
Swivel Caster

121964949
334A33C050BZLC: RNCC: 3 | RNVC: 2
334-OB/50GIKULA: RNCC: 5 | RNVC: 2
LARK 52: RNCC: 5 | RNVC: 9

12 Jul 1983

5340-12-361-0844
Double Angle Bracket

123610844
J29120234-405: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-310-3167
Mending Plate

123103167
81.62430.4053: RNCC: 3 | RNVC: 2

8 May 1987

5340-12-327-0405
Double Angle Bracket

123270405
2601487: RNCC: 3 | RNVC: 2

25 Nov 1991

5340-12-179-8310
Bow Handle

121798310
4258150236: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-329-1598
Electrical-Mechanical Equipment Post

123291598
54.0059.110.03: RNCC: 2 | RNVC: 2
54.0059.110.03: RNCC: 3 | RNVC: 2

22 Jul 1992

5340-12-315-0213
Door Button

123150213
66.3513.050.10-A001: RNCC: 3 | RNVC: 2
377776: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-360-2031
Ball Socket Seat

123602031
7966.33.00: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-350-7312
Angle Bracket

123507312
437 520 2841: RNCC: 3 | RNVC: 2

11 May 2000

5340-12-044-5187

5340-12-306-5624
Hand Crank

123065624
1163864: RNCC: 3 | RNVC: 2
163864: RNCC: 5 | RNVC: 9

11 Mar 1986

5340-12-314-6322
Angle Bracket

123146322
704257077: RNCC: 3 | RNVC: 2

23 Jul 1988

5340-12-341-9865
Mounting Bracket

123419865
4355201741: RNCC: 3 | RNVC: 2
435 520 17 41: RNCC: 5 | RNVC: 2

26 Nov 1996

5340-12-314-7366
Spring Tension Clip

123147366
6MBO06: RNCC: 3 | RNVC: 2
1006000006: RNCC: 3 | RNVC: 2
6SXN 06: RNCC: 5 | RNVC: 2

4 Aug 1988

5340-12-132-0626

5340-12-356-1371
Spring Tension Clip

123561371
0079973890: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-12-188-3862
Leather Strap

121883862
81968012076: RNCC: 3 | RNVC: 2
81.96801.2076: RNCC: 5 | RNVC: 2

6 Jul 1981

5340-12-347-1611
Butt Hinge

123471611
81972010300: RNCC: 3 | RNVC: 2
81.97201.0300: RNCC: 5 | RNVC: 2

4 Nov 1998

5340-12-338-9387
Spring Tension Clip

123389387
7018672991YX: RNCC: 3 | RNVC: 9
701867299: RNCC: 5 | RNVC: 9

13 Sep 1995

5340-12-390-2731
Bail Handle

123902731
498.443: RNCC: 3 | RNVC: 2
498.443: RNCC: 5 | RNVC: 2

24 Oct 2012

5340-12-387-7151
Lock Key

123877151
XP52638200005: RNCC: 3 | RNVC: 2

26 Jan 2012

5340-12-040-0169

5340-12-362-8024
Mounting Plate

123628024
10020926: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-365-3883
Strap Fastener Loop

123653883
54.1067.483.00: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-377-4173
Mending Plate

123774173
04728162: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-304-7890
Bow Handle

123047890
2300107-310500.16: RNCC: 2 | RNVC: 2
2300107-310500.16: RNCC: 3 | RNVC: 2
2300107-310500.16: RNCC: 5 | RNVC: 9
2300107-310500.16: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-357-3451
Rod End Clevis

123573451
8819960001: RNCC: 2 | RNVC: 2
8819960001: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-176-2389
Loop Clamp

121762389
PAN4231CMC5834: RNCC: 3 | RNVC: 2

15 Nov 1978

5340-12-349-5018
Strap Hinge

123495018
T524M1522201: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-332-2564
Bow Handle

123322564
5802017-708410.09: RNCC: 2 | RNVC: 2
5802017-708410.09: RNCC: 3 | RNVC: 2

26 Jul 1993

5340-12-337-7944
Rod End Clevis

123377944
8709960101: RNCC: 2 | RNVC: 2
8709960101: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-12-337-2837
Mounting Bracket

123372837
1000006-600.00: RNCC: 2 | RNVC: 2

13 Feb 1995

5340-12-393-5451
Mounting Bracket

123935451
L251M4803205: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-300-7454
Nonmetallic Bumper

123007454
A11A312110023: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-193-5456
Nonmetallic Bumper

121935456
281837749: RNCC: 3 | RNVC: 2
281837749: RNCC: 5 | RNVC: 2

2 Aug 1982

5340-12-192-3108
Nonmetallic Bumper

121923108
SW4080T034: RNCC: 3 | RNVC: 2
SW4080T034: RNCC: 5 | RNVC: 9

13 Apr 1982

5340-12-302-8158
Metal Runner

123028158
C1003.02.06.03.02: RNCC: 3 | RNVC: 2
C1003.02.06.03.02: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-337-7693
Spring Tension Clip

123377693
1409883778: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-384-8148
Self-Locking Insert

123848148
000019900: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-12-011-5115

5340-12-186-3274
Nonmetallic Bumper

121863274
601350: RNCC: 3 | RNVC: 2

17 Dec 1980

5340-12-174-7153
Retaining Strap

121747153
4072 306 126: RNCC: 3 | RNVC: 2
4072306126: RNCC: 5 | RNVC: 9

25 Jul 1978

5340-12-370-0537
Manual Control Handle

123700537
03074519: RNCC: 3 | RNVC: 2
3074519: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-12-346-9234
Mechanical Stop

123469234
358666: RNCC: 3 | RNVC: 2
358666: RNCC: 5 | RNVC: 2

29 Sep 1998

5340-12-331-0899
Manual Control Lever

123310899
268 230: RNCC: 3 | RNVC: 2
268 230: RNCC: 5 | RNVC: 2
268230: RNCC: 5 | RNVC: 2
268 230: RNCC: 5 | RNVC: 9

22 Mar 1993

5340-12-159-9592
Nonmetallic Bumper

121599592
7810039BL2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-044-1262

5340-12-335-1979
Padlock

123351979
116 SK 60: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-12-094-1043

5340-12-366-9292
Rim Latch Set

123669292
STTC-1664-02.010.200A: RNCC: 2 | RNVC: 2
STTC-1664-02.010.200A: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-12-152-6414
Handle Grip

121526414
858-10-2KS: RNCC: 3 | RNVC: 2
F852-10-2KS: RNCC: 5 | RNVC: 2
1179-37.00: RNCC: 5 | RNVC: 2
F852-10-2KS: RNCC: 5 | RNVC: 2
F852-10-2KS: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-4274
Access Hole Frame

121984274
5801998-211000.00: RNCC: 2 | RNVC: 2
5801998-211000.00: RNCC: 3 | RNVC: 2
5801998-211000.00: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-184-2529
Angle Bracket

121842529
5801357-1300.22: RNCC: 2 | RNVC: 2
5801357-1300.22: RNCC: 3 | RNVC: 2
5801357-1300-22: RNCC: 5 | RNVC: 2
5801357-1300-22: RNCC: 5 | RNVC: 9
5801357-1300-22: RNCC: 5 | RNVC: 9

10 Jul 1980

5340-12-164-5751
Folding Stay

121645751
730024-62.2: RNCC: 2 | RNVC: 2
730024-62-2AND62-3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-378-0611
Mounting Bracket

123780611
320.001-055: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-335-3034
Angle Bracket

123353034
6700018-200000.02: RNCC: 2 | RNVC: 2
6700018-200000.02: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-12-702-0237
Loop Clamp

127020237
VG95211-ML-127020237: RNCC: 2 | RNVC: 2
200N7-70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-379-0841
Latch Bar

123790841
D0110525-001: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-194-0279
Pad Eye

121940279
15616-01: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-177-3437
Dust And Moisture Seal Protective Cap-Plug

121773437
025-0480-000: RNCC: 3 | RNVC: 2
C334-Z21-C668: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-318-7423
Angle Bracket

123187423
C41107-A462-B20: RNCC: 3 | RNVC: 2

14 Aug 1989

5340-12-306-3047
Loop Clamp

123063047
234-10200: RNCC: 3 | RNVC: 2
KK2: RNCC: 5 | RNVC: 2

18 Feb 1986

5340-12-302-0299
Electrical-Mechanical Equipment Post

123020299
5801998-290000.01: RNCC: 2 | RNVC: 2
5801998-290000.01: RNCC: 3 | RNVC: 2
5801998-290000.01: RNCC: 5 | RNVC: 9

28 Nov 1984

5340-12-337-9012
Mounting Bracket

123379012
2654-182600.00: RNCC: 2 | RNVC: 2
2654-182600.00: RNCC: 3 | RNVC: 2

2 May 1995

5340-12-150-8614
Webbing Strap

121508614
390004-150: RNCC: 2 | RNVC: 2
390004-150: RNCC: 3 | RNVC: 2
390004-150: RNCC: 5 | RNVC: 9
390004-150: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-3312
Nonmetallic Bumper

123193312
1700013-10300.01: RNCC: 2 | RNVC: 2
297081: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-199-7195
Double Angle Bracket

121997195
43712519-301: RNCC: 2 | RNVC: 2
43712519-301: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-176-6127
Angle Bracket

121766127
5801216-0000-07: RNCC: 2 | RNVC: 2
5801216-0000-07: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-335-4478
Mounting Plate

123354478
120910: RNCC: 3 | RNVC: 2
89231029: RNCC: 5 | RNVC: 2
698-750-0021: RNCC: 5 | RNVC: 2

18 Aug 1994

5340-12-168-7190
Dust And Moisture Seal Protective Cap

121687190
250/21,3: RNCC: 3 | RNVC: 2
GPN250-21-3: RNCC: 5 | RNVC: 2
GPN250/21,3: RNCC: 5 | RNVC: 2
250-21-3GPN250: RNCC: 5 | RNVC: 9
250021300: RNCC: 5 | RNVC: 9
GPN250-21-3: RNCC: 5 | RNVC: 9
250-21-3: RNCC: 5 | RNVC: 9

30 Mar 1977

5340-12-148-3733
Resilient Mount

121483733
420-205-B-03.02: RNCC: 3 | RNVC: 2
82601501: RNCC: 3 | RNVC: 2
420-205B0302: RNCC: 5 | RNVC: 2
420-205-B-03.02: RNCC: 5 | RNVC: 2
29E2-02-05-03-02: RNCC: 5 | RNVC: 2
420-205B03-02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-168-1935
Angle Bracket

121681935
23176-221000-18-0: RNCC: 2 | RNVC: 2
23176-221000-18-0: RNCC: 5 | RNVC: 2
23176-221000.18.0: RNCC: 5 | RNVC: 9

25 Feb 1977

5340-12-337-6800
Nonmetallic Bumper

123376800
E5074-403-29: RNCC: 3 | RNVC: 2

27 Mar 1995

5340-12-702-5331
Angle Bracket

127025331
VG95211-ML-127025331: RNCC: 2 | RNVC: 2
5.51.7070.0290.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-368-3380
Loop Clamp

123683380
037699: RNCC: 3 | RNVC: 2
RCP1-115-RCP/A4: RNCC: 5 | RNVC: 2

20 Feb 2006

5340-12-197-0769
Rod End Clevis

121970769
8958010002: RNCC: 3 | RNVC: 2
0009962601: RNCC: 5 | RNVC: 2
A8958010002: RNCC: 5 | RNVC: 2
8968010002: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-12-328-9521
Webbing Strap

123289521
2653-971127.00: RNCC: 2 | RNVC: 2
2653-971127.00: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-334-7624
Handle Grip

123347624
52.3109.500.05: RNCC: 3 | RNVC: 2

17 Jun 1994

5340-12-306-2879
Double Angle Bracket

123062879
E0258.802: RNCC: 3 | RNVC: 2

14 Feb 1986

5340-12-197-9131
Mending Plate

121979131
CF 339 025: RNCC: 3 | RNVC: 2
CF 339 025: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-349-7526
Angle Bracket

123497526
A1Z10281603: RNCC: 2 | RNVC: 2
A1Z10281603: RNCC: 3 | RNVC: 2
20359208: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-12-301-4340
Pad Eye

123014340
5210463402: RNCC: 3 | RNVC: 2

13 Oct 1984

5340-12-377-4347
Mounting Plate

123774347
10013297: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-198-7578
Clamping Catch

121987578
1000042-132122: RNCC: 3 | RNVC: 2
1000042-132122: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-194-6039
Plug Button

121946039
251419669A01C: RNCC: 3 | RNVC: 2

23 Nov 1982

5340-12-322-3530
Angle Bracket

123223530
9000 2354: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-379-6290
Lock-Release Lever

123796290
0319056010: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-169-2831
Retaining Strap

121692831
HS8938-7-3: RNCC: 3 | RNVC: 2
1355716: RNCC: 5 | RNVC: 2

3 May 1977

5340-12-364-5945
Mounting Plate

123645945
0242 6769: RNCC: 3 | RNVC: 2
571263477: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-12-337-7876
Friction Catch

123377876
602K0543: RNCC: 3 | RNVC: 2
591M031: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-12-325-7772
Filler Opening Cap

123257772
1245000106: RNCC: 3 | RNVC: 2

8 Jul 1991

5340-12-134-3046

5340-12-321-9511
Access Cover

123219511
1481321004: RNCC: 3 | RNVC: 2
1481321004: RNCC: 5 | RNVC: 2
1481321004: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-12-163-7394
Loop Clamp

121637394
LN9491B25: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-330-3919
Webbing Strap

123303919
15 0004 126: RNCC: 2 | RNVC: 2
15 0004 126: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-12-323-9650
Metallic Bumper

123239650
2300074-991300.07: RNCC: 2 | RNVC: 2
2300074-991300.07: RNCC: 5 | RNVC: 2
2300074-991300.07: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-306-8611
Loop Clamp

123068611
43711581-601: RNCC: 3 | RNVC: 2

10 Apr 1986

5340-12-145-3846

5340-12-326-6609
Folding Stay

123266609
7820349960: RNCC: 3 | RNVC: 2
78203 49960: RNCC: 5 | RNVC: 9

18 Oct 1991

5340-12-317-1770
Sealing Plug Assembly

123171770
23176-261033.00.0: RNCC: 3 | RNVC: 2
23176-261033-00-0: RNCC: 5 | RNVC: 9

15 Mar 1989

5340-12-348-4811
Double Angle Bracket

123484811
2300103-262034.00.0: RNCC: 3 | RNVC: 2
2300103-262034-00-0: RNCC: 5 | RNVC: 9

29 Jun 1999

5340-12-379-3618
Mounting Bracket

123793618
0105868: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-12-301-0651
Spring Loaded Cylinder Fastener

123010651
54.0028.222.00: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-190-4600
Rim Lock

121904600
NR. T70: RNCC: 3 | RNVC: 2

26 Nov 1981

5340-12-348-7752
Loop Clamp

123487752
DIN3016-2-G1-73X15-W1-2: RNCC: 2 | RNVC: 2
0015714: RNCC: 5 | RNVC: 2
DIN3016-G1-73X15-W1-2: RNCC: 5 | RNVC: 9
DIN3016-G1-73X15W1-2: RNCC: 5 | RNVC: 9

17 Aug 1999

5340-12-177-4599
Nut And Bolt Locking Plate

121774599
23305-207000.19.0: RNCC: 2 | RNVC: 2
23305-207000.19.0: RNCC: 3 | RNVC: 2
23305-207000-19-0: RNCC: 5 | RNVC: 2
23305-207000-19-0: RNCC: 5 | RNVC: 9
23305-207000.19.0: RNCC: 5 | RNVC: 9

1 Feb 1979

5340-12-380-2826
Mounting Bracket

123802826
2599-25000: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-365-6348
Angle Bracket

123656348
J92228273-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-316-4010
Mounting Bracket

123164010
5801998-413000.00: RNCC: 2 | RNVC: 2
5801998-413000.00: RNCC: 3 | RNVC: 2
5801998-413000.00: RNCC: 5 | RNVC: 9

16 Jan 1989

5340-12-325-3649
Loop Clamp

123253649
0336 9462: RNCC: 3 | RNVC: 2
K0.00336-9462: RNCC: 5 | RNVC: 2
K0003369462: RNCC: 5 | RNVC: 2
4790099: RNCC: 5 | RNVC: 2

29 May 1991

5340-12-324-4004
Resilient Mount

123244004
134578-04040: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-12-700-8668
Loop Clamp

127008668
VG95211-ML-127008668: RNCC: 2 | RNVC: 2
155N464-10: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-125-0705
Expansion Plug

121250705
8401788: RNCC: 3 | RNVC: 2
0026017: RNCC: 5 | RNVC: 2
0026-017: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-339-7909
Manual Control Lever

123397909
2654-330510.00: RNCC: 2 | RNVC: 2
2654-330510.00: RNCC: 3 | RNVC: 2
2654-330 510.00: RNCC: 5 | RNVC: 9
K6084-1210: RNCC: 5 | RNVC: 9
2654-330 510.00: RNCC: 5 | RNVC: 9

18 Jan 1996

5340-12-196-8322
Swivel Caster

121968322
KB-59621-760: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-126-6271
Expansion Plug

121266271
DIN470-20-ST-PHR: RNCC: 2 | RNVC: 2
000470020000: RNCC: 5 | RNVC: 2
20DIN470PHR: RNCC: 5 | RNVC: 2
20DIN470PHRE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-5306
Manual Control Lever

123555306
2125-025260.05B: RNCC: 2 | RNVC: 2
2125-025260.05B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-365-5861
Double Angle Bracket

123655861
J29120121-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-355-1849
Angle Bracket

123551849
VG95211-ML-123551849: RNCC: 2 | RNVC: 2
5.12.7020.1470.19: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-12-702-4012
Mounting Bracket

127024012
VG95211-ML-127024012: RNCC: 2 | RNVC: 2
5.12.5811.1230.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-331-8217
Resilient Mount

123318217
1-0283-70-170-0: RNCC: 3 | RNVC: 9
88.43701-6024: RNCC: 5 | RNVC: 2
88.43701.6024: RNCC: 5 | RNVC: 2
88437016024: RNCC: 5 | RNVC: 2
10283701700: RNCC: 5 | RNVC: 9

24 Jun 1993

5340-12-313-0178
Double Angle Bracket

123130178
P-086148-011: RNCC: 3 | RNVC: 2
P086148-011: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-343-8919
Mechanical Stop

123438919
1421034005: RNCC: 3 | RNVC: 2
0130 9261: RNCC: 5 | RNVC: 2

11 Aug 1997

5340-12-342-1411
Lock-Release Lever

123421411
536H20007: RNCC: 3 | RNVC: 2
536H20007E1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-373-9659
Multiple Angle Bracket

123739659
L232M7811101: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-12-310-5039
Case Corner

123105039
4355250939: RNCC: 3 | RNVC: 2

27 May 1987

5340-12-352-7141
Access Cover

123527141
64416363: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-352-5833
Loop Clamp

123525833
8211000: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-315-8490
Webbing Strap

123158490
5019R-6000: RNCC: 3 | RNVC: 2
120316: RNCC: 5 | RNVC: 2

1 Dec 1988

5340-12-371-9681
Angle Bracket

123719681
2414197: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-380-5594
Mending Plate

123805594
8800160318: RNCC: 3 | RNVC: 2

9 Nov 2009

5340-12-091-7284

5340-12-022-5955

5340-12-372-4989
Butt Hinge

123724989
10060043: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-313-8697
Mortise Lock Set

123138697
283800375C: RNCC: 3 | RNVC: 2
81.97100.6069: RNCC: 5 | RNVC: 2
81971006069: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-196-3005
Dust And Moisture Seal Protective Cap

121963005
8980113504: RNCC: 3 | RNVC: 2
8980113504: RNCC: 5 | RNVC: 2
5000809068: RNCC: 5 | RNVC: 2
0691016: RNCC: 5 | RNVC: 2
691016: RNCC: 5 | RNVC: 9

23 Jun 1983

5340-12-359-4206
Nonmetallic Bumper

123594206
017240-040X020: RNCC: 3 | RNVC: 2
6410.111.000.035: RNCC: 5 | RNVC: 2

4 Feb 2003

5340-12-362-0000
Resilient Mount

123620000
50386700: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-393-2958
Mounting Plate

123932958
800030: RNCC: 3 | RNVC: 2
067: RNCC: 5 | RNVC: 2

5 Sep 2013

5340-12-322-7237
Resilient Mount

123227237
B3030400: RNCC: 3 | RNVC: 9
42048112EC5012-58: RNCC: 5 | RNVC: 2
42048112: RNCC: 5 | RNVC: 2

17 Sep 1990

5340-12-159-8616
Loop Clamp

121598616
M1213: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-9994
Access Cover

123229994
6731271: RNCC: 3 | RNVC: 2
6731271: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-12-361-6916
Rim Lock

123616916
704.122.018: RNCC: 3 | RNVC: 2
28730618: RNCC: 5 | RNVC: 2

4 Nov 2003

5340-12-360-0974
Loop Clamp

123600974
9419950001: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-180-1856
Halter

121801856
WW 110 042 BU: RNCC: 2 | RNVC: 2
WW 110 042 BU: RNCC: 3 | RNVC: 2
WW 110 042 BU: RNCC: 5 | RNVC: 2
WW 110 042 BU: RNCC: 5 | RNVC: 2
WW110042AU: RNCC: 5 | RNVC: 9
WW 110 042 AU: RNCC: 5 | RNVC: 9
WW110042AU: RNCC: 5 | RNVC: 9
WW110042AU: RNCC: 5 | RNVC: 9

27 Aug 1979

5340-12-320-9710
Webbing Strap

123209710
AFG012413: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-12-349-1483
Padlock

123491483
01677: RNCC: 3 | RNVC: 2
01677: RNCC: 5 | RNVC: 9
101677: RNCC: 5 | RNVC: 9

30 Sep 1999

5340-12-320-9062
Flare Lock Fastener

123209062
21100-566: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-12-378-3311
Detent Plunger

123783311
041 143 040 000: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-358-8918
Angle Bracket

123588918
3834929141: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-366-4240
Dust And Moisture Seal Protective Cap

123664240
R910783277: RNCC: 3 | RNVC: 2
00783277: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-12-380-1308
Access Cover

123801308
300.041.106: RNCC: 3 | RNVC: 2

30 Sep 2009

5340-12-374-8839
Angle Bracket

123748839
SK979-192200.004.0: RNCC: 3 | RNVC: 2
1304010: RNCC: 5 | RNVC: 2
7085559: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-12-180-2716
Butt Hinge

121802716
39-1040: RNCC: 2 | RNVC: 2
39-1040: RNCC: 3 | RNVC: 2

31 Aug 1979

5340-12-308-5733
Nut And Bolt Locking Plate

123085733
1295 332 052: RNCC: 3 | RNVC: 2
81908010293: RNCC: 5 | RNVC: 2
7382068: RNCC: 5 | RNVC: 2
0002640973: RNCC: 5 | RNVC: 2
1295332052: RNCC: 5 | RNVC: 2
81.90801-0293: RNCC: 5 | RNVC: 2

24 Oct 1986

5340-12-378-3820
Loop Clamp

123783820
DIN3015-LB-K3R-22-PP: RNCC: 2 | RNVC: 2
322-PP-IS: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-316-0687
Mending Plate

123160687
2500179-190000.050.0: RNCC: 2 | RNVC: 2
2500179-190000.050.0: RNCC: 3 | RNVC: 2

20 Dec 1988

5340-12-339-7085
Mending Plate

123397085
2500255-199900.002.0: RNCC: 2 | RNVC: 2
2500255-199900.002.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-187-5178
Mounting Bracket

121875178
5802206-002000-001: RNCC: 2 | RNVC: 2
535.5632: RNCC: 3 | RNVC: 2
5355632: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-307-3070
Mending Plate

123073070
F01-220000-01-0: RNCC: 3 | RNVC: 2

3 Jun 1986

5340-12-379-0856
Section Block Clamp

123790856
D0110529-001: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-317-1657
Electrical-Mechanical Equipment Post

123171657
C249-A10-C32: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-191-6111
Spring Tension Clip

121916111
12937FL: RNCC: 3 | RNVC: 2
1109950065: RNCC: 5 | RNVC: 2
02-2634FL: RNCC: 5 | RNVC: 2

16 Feb 1982

5340-12-700-8556
Loop Clamp

127008556
VG95211-ML-127008556: RNCC: 2 | RNVC: 2
155N1119-662: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-8045
Angle Bracket

121968045
4900123-2500.05: RNCC: 2 | RNVC: 2
4900123-2500.05: RNCC: 3 | RNVC: 2
4900123-2500.05: RNCC: 3 | RNVC: 2
4900123-2500.05: RNCC: 3 | RNVC: 2
4900123-2500.05: RNCC: 5 | RNVC: 9
4900123-2500.05: RNCC: 5 | RNVC: 9

18 Aug 1983

5340-12-369-0867
Adapter

123690867
450910-6127-000: RNCC: 3 | RNVC: 2

19 May 2006

5340-12-325-4204
Expansion Plug

123254204
DIN443-B32-ST-PHR: RNCC: 2 | RNVC: 2
B32 DIN443-PHR: RNCC: 5 | RNVC: 2
DIN443-B32-PHR: RNCC: 5 | RNVC: 2
0279097: RNCC: 5 | RNVC: 2

5 Jun 1991

5340-12-355-3390
Access Cover

123553390
22-320-JK-045: RNCC: 3 | RNVC: 2
1603295-9300: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-12-338-4723
Mounting Plate

123384723
160-22665-02: RNCC: 3 | RNVC: 2
160-22665-02: RNCC: 5 | RNVC: 9

14 Jul 1995

5340-12-195-4732
Nonmetallic Bumper

121954732
DIN95364-A20X13,5-M6X10-NR55ST: RNCC: 2 | RNVC: 2
530020-M6X10.NR55.ST: RNCC: 5 | RNVC: 2
328-182700.007: RNCC: 5 | RNVC: 2
328-182700-007: RNCC: 5 | RNVC: 9
328-182700.007: RNCC: 5 | RNVC: 9
VG95364-A20X13,5-M6X10-NR55ST: RNCC: 5 | RNVC: 9
VG95364-A20X13,5-NR55ST-M6X10: RNCC: 5 | RNVC: 9

2 Mar 1983

5340-12-173-7899
Dust And Moisture Seal Protective Cap

121737899
PAN3861-05: RNCC: 3 | RNVC: 2

16 May 1978

5340-12-326-8187
Mending Plate

123268187
30-79910-0267: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-12-368-7681
Friction Catch

123687681
81971166014: RNCC: 3 | RNVC: 2
81.97116-6014: RNCC: 5 | RNVC: 2

18 Apr 2006

5340-12-345-2995
Mounting Plate

123452995
VG95211-ML-123452995: RNCC: 2 | RNVC: 2
VD-41-10-00632-123: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-12-345-5095
Lock-Release Lever

123455095
2125-121600A07B: RNCC: 2 | RNVC: 2
2125-121600A07B: RNCC: 3 | RNVC: 2
2125-121600A07B: RNCC: 5 | RNVC: 2

25 Mar 1998

5340-12-302-9264
Mending Plate

123029264
4-128448: RNCC: 3 | RNVC: 2
268979: RNCC: 5 | RNVC: 2

8 Feb 1985

5340-12-177-4769
Loop Clamp

121774769
DIN3016-1-A1-11X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-11X20-W1-2: RNCC: 3 | RNVC: 2
RS1.11/20: RNCC: 3 | RNVC: 2
4110020011: RNCC: 5 | RNVC: 2
RS1100-11-20: RNCC: 5 | RNVC: 2
RS1100.11/20: RNCC: 5 | RNVC: 2
DIN3016-A1-11X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A11X20-W1: RNCC: 5 | RNVC: 9
VG95931A11X20W1: RNCC: 5 | RNVC: 9

1 Feb 1979

5340-12-182-9828
Webbing Strap

121829828
2000 N-0/5,5M: RNCC: 3 | RNVC: 2
2000N0-5-5M: RNCC: 5 | RNVC: 9
2000 N-0/5,5M: RNCC: 5 | RNVC: 9
2000 N-0/5500MM: RNCC: 5 | RNVC: 9
2000-0-N/5,5M: RNCC: 5 | RNVC: 9
2000N/5500MM: RNCC: 5 | RNVC: 9
ZA99: RNCC: 6 | RNVC: 9

11 Mar 1980

5340-12-339-1371
Support Hook

123391371
3662230941: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-12-369-0703
Nonmetallic Bumper

123690703
701843316: RNCC: 3 | RNVC: 2

18 May 2006

5340-12-169-7920
Angle Bracket

121697920
3709955031: RNCC: 3 | RNVC: 2
5077 327 046: RNCC: 3 | RNVC: 2
5077327046: RNCC: 5 | RNVC: 2

10 Jun 1977

5340-12-350-4345
Section Block Clamp

123504345
JN0413P40: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-180-2132
Loop Clamp

121802132
03340700: RNCC: 3 | RNVC: 2
3340700ED5034-71: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-142-3945

5340-12-094-4638

5340-12-134-0525

5340-12-324-7261
Double Angle Bracket

123247261
2500171-412000.02: RNCC: 2 | RNVC: 2
2500171-412000.02: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-12-320-6290
Filler Opening Cap

123206290
16131455063: RNCC: 3 | RNVC: 2
1455063: RNCC: 5 | RNVC: 2
16131455063: RNCC: 5 | RNVC: 9

1 Feb 1990

5340-12-360-3728
Dust And Moisture Seal Protective Cap

123603728
0009626504: RNCC: 3 | RNVC: 2
0009626504: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-389-9843
Retaining Strap

123899843
151-26819: RNCC: 3 | RNVC: 2

20 Sep 2012

5340-12-316-6478
Mending Plate

123166478
5187643: RNCC: 3 | RNVC: 2

31 Jan 1989

5340-12-192-1626
Retaining Strap

121921626
SW4080T031: RNCC: 3 | RNVC: 2
SW4080T031: RNCC: 5 | RNVC: 9

29 Mar 1982

5340-12-316-6039
Double Angle Bracket

123166039
AZ5005G030: RNCC: 3 | RNVC: 2
AZ5005G030: RNCC: 5 | RNVC: 9

27 Jan 1989

5340-12-345-5860
Angle Bracket

123455860
TA3100P004: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-353-4918
Spacing Threaded Standoff

123534918
8711590571: RNCC: 3 | RNVC: 2
15010246: RNCC: 5 | RNVC: 2
871 159 05 71: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-316-5720
Dust And Moisture Seal Protective Cap

123165720
201643010002: RNCC: 3 | RNVC: 2
201643010002: RNCC: 5 | RNVC: 2

25 Jan 1989

5340-12-122-8961

5340-12-044-1575

5340-12-351-0522
Mounting Bracket

123510522
4377900114: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-355-4812
Mounting Bracket

123554812
T521M1106221: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-389-4468
Swivel Caster

123894468
I0005996: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-322-6335
Retaining Strap

123226335
2254018: RNCC: 3 | RNVC: 2
2049: RNCC: 5 | RNVC: 2

7 Sep 1990

5340-12-355-6272
Spacing Threaded Standoff

123556272
54.1094.258.00: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-12-143-6809
Schraubbuchse

121436809
8379970915: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-142-3944

5340-12-315-1537
Mounting Bracket

123151537
5801417-01104.001: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-12-331-6586
Nonmetallic Bumper

123316586
480/7345-04-11-00/44-45: RNCC: 3 | RNVC: 2
480-7345-04-11-00-44,45: RNCC: 5 | RNVC: 2
480-7345-04-11-00-44-45: RNCC: 5 | RNVC: 2
480/7345-04-11-00/44,45: RNCC: 5 | RNVC: 2

4 Jun 1993

5340-12-339-4104
Retaining Strap

123394104
4931-0004-300000: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-12-186-2063
Mending Plate

121862063
23290-052000.020: RNCC: 2 | RNVC: 2
23290-052000.020: RNCC: 3 | RNVC: 2
23290-052000.020: RNCC: 5 | RNVC: 9
23290-052000-020: RNCC: 5 | RNVC: 9
23290-052000.020: RNCC: 5 | RNVC: 9

6 Dec 1980

5340-12-315-4964
Mending Plate

123154964
5803471-201912.01: RNCC: 2 | RNVC: 2
65.7789.458.01-A001: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-12-314-3928
Bow Handle

123143928
35121185057: RNCC: 3 | RNVC: 2

1 Jul 1988

5340-12-358-2565
Multiple Angle Bracket

123582565
61.9802.266.02-A001: RNCC: 3 | RNVC: 2
61.9802.266.02-A001: RNCC: 5 | RNVC: 9

2 Oct 2002

5340-12-174-2356

5340-12-384-5986
Lifting Sling Sleeve

123845986
98F27508498.202: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-332-1724
Retaining Strap

123321724
6006 322 088: RNCC: 3 | RNVC: 2
6006322088: RNCC: 5 | RNVC: 2

22 Jul 1993

5340-12-332-7346
Protection Bellows

123327346
00098430910: RNCC: 3 | RNVC: 9
108-352000.000: RNCC: 5 | RNVC: 9
9843091: RNCC: 5 | RNVC: 9

13 Sep 1993

5340-12-094-4942

5340-12-320-1337
Strap Hinge

123201337
0577901: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-316-8299
Angle Bracket

123168299
2300279-5000.17: RNCC: 2 | RNVC: 2
2300279-5000.17: RNCC: 3 | RNVC: 2
2300279-5000.17: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-316-2930
Support Hook

123162930
5183808: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-322-1004
Angle Bracket

123221004
42095287: RNCC: 3 | RNVC: 2
42095287ED50-8390: RNCC: 5 | RNVC: 2

24 Jul 1990

5340-12-323-9754
Sealing Plug Assembly

123239754
056103379: RNCC: 3 | RNVC: 2
056103379: RNCC: 5 | RNVC: 2

14 Jan 1991

5340-12-190-3795
Loop Clamp

121903795
PAN4231CBCD5520: RNCC: 3 | RNVC: 2

24 Nov 1981

5340-12-357-6480
Mounting Bracket

123576480
0025456840: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-180-8750
Dust And Moisture Seal Protective Plug

121808750
0287 4544: RNCC: 3 | RNVC: 2
2874544: RNCC: 5 | RNVC: 2
2874544EE0704-77: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-158-7535
Angle Bracket

121587535
8370780941: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-354-9071
Mounting Bracket

123549071
8691840190: RNCC: 3 | RNVC: 2
869 184 01 90: RNCC: 5 | RNVC: 2

4 Sep 2001

5340-12-158-6743

5340-12-317-5581
Mounting Plate

123175581
0301 324 012: RNCC: 3 | RNVC: 2
0301324012: RNCC: 5 | RNVC: 2

18 Apr 1989

5340-12-172-5987
Retaining Band

121725987
CF307229: RNCC: 3 | RNVC: 2
CF 307 229: RNCC: 5 | RNVC: 2
CF307229: RNCC: 5 | RNVC: 2
CF307229: RNCC: 5 | RNVC: 2
CF 307 229: RNCC: 5 | RNVC: 2

31 Jan 1978

5340-12-094-1578

5340-12-317-3899
Mending Plate

123173899
3719202: RNCC: 3 | RNVC: 2
ST359090 ITEM 49: RNCC: 5 | RNVC: 2

4 Apr 1989

5340-12-174-9290
Access Cover

121749290
5015-51: RNCC: 3 | RNVC: 2
0009974435: RNCC: 5 | RNVC: 2
A0009974435: RNCC: 5 | RNVC: 2

9 Aug 1978

5340-12-328-5661
Access Cover

123285661
WW 210 153 AX: RNCC: 3 | RNVC: 2
WW210153AX: RNCC: 5 | RNVC: 2
WW 210 153 AX: RNCC: 5 | RNVC: 2

3 Jun 1992

5340-12-319-3906
Angle Bracket

123193906
518012.0013.01: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-327-5401
Mounting Plate

123275401
4021501273: RNCC: 3 | RNVC: 2

30 Jan 1992

5340-12-351-0461
Mounting Bracket

123510461
78024 97030: RNCC: 2 | RNVC: 2
7802497030: RNCC: 3 | RNVC: 2
78024 97030: RNCC: 5 | RNVC: 9

19 Jun 2000

5340-12-010-5697

5340-12-127-7469
Expansion Plug

121277469
DIN443-50-ST-PHR: RNCC: 2 | RNVC: 2
50DIN443PHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-353-9194
Angle Bracket

123539194
2500284-000000.014.0: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-332-9801
Dust And Moisture Seal Protective Cap

123329801
TSW 55-1-G 92: RNCC: 3 | RNVC: 2
TSW55-1-G92: RNCC: 5 | RNVC: 2
TSW55-1-G92: RNCC: 5 | RNVC: 2

18 Oct 1993

5340-12-371-9887
Webbing Strap

123719887
598102-185630.000.0: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-12-197-0129
Webbing Strap

121970129
79057/SCHLAUFE-720-200: RNCC: 3 | RNVC: 2
01151-2-SCHLAUFE-FE200MM-LE600MM: RNCC: 3 | RNVC: 2
4900059-111246.000.0: RNCC: 3 | RNVC: 2
4900059-111246-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-25X200X600-C3/SCHLAUF: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-701-6164
Angle Bracket

127016164
VG95211-ML-127016164: RNCC: 2 | RNVC: 2
5.12.7010.1650.09: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-341-6246
Split Tubular Clip

123416246
5.471-060.0: RNCC: 3 | RNVC: 2
5.471-060: RNCC: 5 | RNVC: 9

3 Oct 1996

5340-12-335-2273
Access Cover

123352273
704-122530-000-0: RNCC: 3 | RNVC: 2

28 Jul 1994

5340-12-327-0835
Multiple Angle Bracket

123270835
701-782010-000-0: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-12-363-6003
Retaining Strap

123636003
HRBGS-2-BUE-STZN: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-12-199-1168
Angle Bracket

121991168
A-296658-403: RNCC: 3 | RNVC: 2
A296658-403: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-365-0926
Manual Control Lever

123650926
1000192-05 0 30100: RNCC: 2 | RNVC: 2
1000192-05 0 30100: RNCC: 3 | RNVC: 2

26 Nov 2004

5340-12-302-8433
Rigid Caster

123028433
6600117-520000.00: RNCC: 2 | RNVC: 2
6600117-520000.00: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-172-0633
Retaining Strap

121720633
1000078-200400.02: RNCC: 2 | RNVC: 2
1000078-200400.02: RNCC: 3 | RNVC: 2
1000078-200400-02: RNCC: 5 | RNVC: 2
1000078-200400-02: RNCC: 5 | RNVC: 9
1000078-200400.02: RNCC: 5 | RNVC: 9
1000078-200400-02: RNCC: 5 | RNVC: 9
1000078-200400.02: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-310-3344
Angle Bracket

123103344
1267901: RNCC: 3 | RNVC: 2
5340-12-306-0144: RNCC: 6 | RNVC: 9

11 May 1987

5340-12-392-4231
Access Cover

123924231
D3-362-29: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-322-1121
Resilient Mount

123221121
19 90 41: RNCC: 3 | RNVC: 2
19-90-41: RNCC: 5 | RNVC: 9
19 90 41: RNCC: 5 | RNVC: 9

25 Jul 1990

5340-12-339-0572
Retaining Strap

123390572
796.291: RNCC: 3 | RNVC: 2
HKL799-29: RNCC: 5 | RNVC: 9

5 Oct 1995

5340-12-318-5571
Mounting Plate

123185571
2653-073100.04: RNCC: 2 | RNVC: 2
2653-073100.04: RNCC: 3 | RNVC: 2
2653-073100.04: RNCC: 5 | RNVC: 2

26 Jul 1989

5340-12-339-0439
Angle Bracket

123390439
5801609-1900.09: RNCC: 2 | RNVC: 2
5801609-1900.09: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-349-0956
Butt Hinge

123490956
J52822820-401: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-12-314-0534
Hinge Torsion Bar

123140534
LN9373-4X1270: RNCC: 2 | RNVC: 2

2 Jun 1988

5340-12-385-7931
Loop Clamp

123857931
DIN3016-1-D1-15X15-W5-NBR: RNCC: 2 | RNVC: 2

8 Jul 2011

5340-12-702-5375
Mounting Bracket

127025375
VG95211-ML-127025375: RNCC: 2 | RNVC: 2
5.51.7204.1252.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-303-8736
Nonmetallic Bumper

123038736
124026: RNCC: 3 | RNVC: 2

10 May 1985

5340-12-321-2855
Manual Control Lever

123212855
9000 2087: RNCC: 3 | RNVC: 2

27 Apr 1990

5340-12-304-8260
Retaining Strap

123048260
2300107-310541: RNCC: 2 | RNVC: 2
2300107-310541: RNCC: 3 | RNVC: 2
2300107-310541: RNCC: 5 | RNVC: 9
2300107-310541: RNCC: 5 | RNVC: 9

28 Aug 1985

5340-12-092-0896

5340-12-335-8521
Spring Tension Clip

123358521
304 034: RNCC: 3 | RNVC: 2
304 034 011: RNCC: 5 | RNVC: 2
E4.034: RNCC: 5 | RNVC: 2

23 Sep 1994

5340-12-321-9656
Butt Hinge

123219656
4637200237: RNCC: 3 | RNVC: 2

12 Jul 1990

5340-12-178-6762
Angle Bracket

121786762
8702030440: RNCC: 3 | RNVC: 2

9 May 1979

5340-12-301-2406
Mending Plate

123012406
4179253: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-188-1210
Butt Hinge

121881210
LN9172KFF210: RNCC: 2 | RNVC: 2
LN9172FF210: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-12-302-2600
Angle Bracket

123022600
6245240140: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-312-8051
Mounting Bracket

123128051
0850.021.00.00.029: RNCC: 3 | RNVC: 2
0240588: RNCC: 5 | RNVC: 2

8 Feb 1988

5340-12-358-7729
Webbing Strap

123587729
3827901596: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-359-7331
Loop Clamp

123597331
S281M3027101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-310-6978
Catch Strike

123106978
2352201: RNCC: 3 | RNVC: 2

22 Jun 1987

5340-12-359-4747
Fuehrungss Gleiter

123594747
LAU15AL: RNCC: 3 | RNVC: 2
267-5814: RNCC: 5 | RNVC: 2

10 Feb 2003

5340-12-011-4382

5340-12-024-0756

5340-12-393-5733
Angle Bracket

123935733
4245519340: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-385-0750
Access Cover

123850750
921428: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-12-011-2095

5340-12-323-2220
Butt Hinge

123232220
100016622: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-319-7134
Helical Compression Spring Seat

123197134
03208001: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-12-702-1692
Mounting Plate

127021692
VG95211-ML-127021692: RNCC: 2 | RNVC: 2
30.7103.90: RNCC: 3 | RNVC: 2

6 Apr 1995

Load More Results