What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 56 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 56 of 178

5340-12-364-2870
Angle Bracket

123642870
5374-126000A02B: RNCC: 2 | RNVC: 2
5374-126000A02B: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-314-9018
Webbing Strap

123149018
160-26286-02: RNCC: 3 | RNVC: 2
160-26286-02: RNCC: 5 | RNVC: 9

25 Aug 1988

5340-12-361-1029
Mechanic Equipment Hardware Kit

123611029
V12S1T1T1-160: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-12-318-6439
Mounting Plate

123186439
512214-2151.000: RNCC: 3 | RNVC: 2

3 Aug 1989

5340-12-314-9275
Retaining Band

123149275
926765677: RNCC: 3 | RNVC: 2
3202-670.02.01.500-000: RNCC: 5 | RNVC: 2

27 Aug 1988

5340-12-311-6244
Mending Plate

123116244
65.7096.200.10-A001: RNCC: 3 | RNVC: 2

29 Sep 1987

5340-12-193-6490
Retaining Strap

121936490
PAN6483C: RNCC: 3 | RNVC: 2

17 Aug 1982

5340-12-311-8440
Double Angle Bracket

123118440
2300074-5500.01: RNCC: 2 | RNVC: 2
2300074-5500.01: RNCC: 3 | RNVC: 2
2300074-5500.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-353-0903
Mechanic Equipment Hardware Kit

123530903
650.32: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-12-358-0655
Loop Clamp

123580655
2300042-255625.000: RNCC: 2 | RNVC: 2
2300042-255625.000: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-12-091-3396

5340-12-028-0231
Hook Snap Safety

120280231
245X80X8: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-360-0348
Manual Control Handle

123600348
8012.34.00: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-130-5065

5340-12-179-7238
Mounting Plate

121797238
5941680: RNCC: 3 | RNVC: 2

23 Jul 1979

5340-12-027-9758

5340-12-360-6421
Mounting Bracket

123606421
000611-253000.00: RNCC: 3 | RNVC: 2

23 Jun 2003

5340-12-148-5000

5340-12-337-2609
Flush Lock

123372609
703829239E: RNCC: 3 | RNVC: 9

8 Feb 1995

5340-12-312-7288
Angle Bracket

123127288
3819190012: RNCC: 3 | RNVC: 2
381 919 00 12: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-125-8425

5340-12-302-5059
Mending Plate

123025059
F1003.02.06.01.07: RNCC: 3 | RNVC: 2
F1003.02.06.01.07: RNCC: 5 | RNVC: 9

9 Jan 1985

5340-12-348-0841
Helical Compression Spring Seat

123480841
1000118-110.36: RNCC: 2 | RNVC: 2
228684: RNCC: 3 | RNVC: 2
228 684: RNCC: 5 | RNVC: 2

12 Apr 1999

5340-12-193-3899
Spring Tension Clip

121933899
1084010328: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-125-5026

5340-12-369-5033
Mending Plate

123695033
164168: RNCC: 3 | RNVC: 2

13 Jul 2006

5340-12-332-5638
Mending Plate

123325638
1361235-16038-01: RNCC: 3 | RNVC: 2

20 Aug 1993

5340-12-316-1552
Door Handle

123161552
4067660102: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-316-4432
Mounting Bracket

123164432
068903251F: RNCC: 3 | RNVC: 2

18 Jan 1989

5340-12-341-0531
Retaining Strap

123410531
269012060007: RNCC: 3 | RNVC: 2
269012060007: RNCC: 5 | RNVC: 2

23 Jul 1996

5340-12-315-0238
Mounting Bracket

123150238
P-296820-403: RNCC: 3 | RNVC: 2
P296820-403: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-701-9403
Rod End Clevis

127019403
VG95211-ML-127019403: RNCC: 2 | RNVC: 2
4.15.9101.7731.98: RNCC: 3 | RNVC: 2
SKZ-9101-7731: RNCC: 5 | RNVC: 2

13 Mar 1995

5340-12-301-9475
Nonmetallic Bumper

123019475
2393-000000.000.0: RNCC: 2 | RNVC: 2
CF 802 545 A: RNCC: 2 | RNVC: 2
2393-000000.000.0: RNCC: 3 | RNVC: 2
CF 802 545 A: RNCC: 5 | RNVC: 2
CF802545A: RNCC: 5 | RNVC: 2
CF 802 545 A: RNCC: 5 | RNVC: 2
2393-000 000.000.0: RNCC: 5 | RNVC: 2

20 Nov 1984

5340-12-193-9478
Sealing Plug Assembly

121939478
160-736900.03: RNCC: 3 | RNVC: 2
160-736900-03: RNCC: 5 | RNVC: 2
160-736900.03: RNCC: 5 | RNVC: 9

16 Sep 1982

5340-12-386-8927
Nut And Bolt Head Protective Cap

123868927
0.553.9482: RNCC: 3 | RNVC: 2
0.553.9482: RNCC: 5 | RNVC: 2

13 Oct 2011

5340-12-338-8035
Angle Bracket

123388035
6700017-204900.01: RNCC: 2 | RNVC: 2
6700017-204900.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-198-2862
Electrical-Mechanical Equipment Post

121982862
VG95148B4XM2,5X13-NRST: RNCC: 2 | RNVC: 2
VG95148B4XM2,5X13-NRST: RNCC: 3 | RNVC: 2
66.3529.100.04-A001: RNCC: 3 | RNVC: 2
179511: RNCC: 5 | RNVC: 2

11 Jan 1984

5340-12-379-2970
Mounting Bracket

123792970
5802017-732101.00: RNCC: 2 | RNVC: 2
5802017-732101.00: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-365-1184
Permanent Magnet

123651184
2202710098: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-188-9959
Mending Plate

121889959
9434249: RNCC: 3 | RNVC: 2
03077100019000: RNCC: 5 | RNVC: 2
F300 0T 001 2849: RNCC: 6 | RNVC: 9

17 Aug 1981

5340-12-010-8637

5340-12-307-3760
Mending Plate

123073760
43716142-601: RNCC: 2 | RNVC: 2
43716142-601: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-334-0125
Mounting Bracket

123340125
4623150040: RNCC: 3 | RNVC: 2
ZR23150040: RNCC: 5 | RNVC: 2
7013-A0: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-12-356-7434
Mechanical Stop

123567434
T622M1301210: RNCC: 2 | RNVC: 2
T622M1301210: RNCC: 3 | RNVC: 2
1023102: RNCC: 5 | RNVC: 9

2 Apr 2002

5340-12-377-1977
Dust And Moisture Seal Protective Cap-Plug Set

123771977
312868: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-185-6678
Angle Bracket

121856678
02480663: RNCC: 3 | RNVC: 2
2480663EE5052-81: RNCC: 5 | RNVC: 2

23 Oct 1980

5340-12-377-0278
Buckle

123770278
10026846: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-12-349-4064
Access Cover

123494064
T524M3006101: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-134-8187

5340-12-197-3187
Nonmetallic Bumper

121973187
1169870040: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-12-387-4904
Mounting Bracket

123874904
X51599100003: RNCC: 3 | RNVC: 2

2 Jan 2012

5340-12-180-7370
Retaining Strap

121807370
0287 6372: RNCC: 3 | RNVC: 2
2876372EE0704-79: RNCC: 5 | RNVC: 2
2876372: RNCC: 5 | RNVC: 2

1 Oct 1979

5340-12-393-6846
Mounting Plate

123936846
11.29225-0058: RNCC: 3 | RNVC: 2
11.29225-0058: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-337-2793
Rod End Clevis

123372793
326-55-0100-33: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-12-338-7252
Angle Bracket

123387252
2300013-3220.01: RNCC: 2 | RNVC: 2
7900621-00200.01: RNCC: 3 | RNVC: 2
2300013-3220.01: RNCC: 5 | RNVC: 2
2300013-3220.01: RNCC: 5 | RNVC: 9
9911186: RNCC: 5 | RNVC: 9

21 Aug 1995

5340-12-305-3500
Angle Bracket

123053500
5801763-040000.002: RNCC: 2 | RNVC: 2
5801763-040000.002: RNCC: 3 | RNVC: 2
5801763-040000.002: RNCC: 5 | RNVC: 9

24 Oct 1985

5340-12-320-3024
Mending Plate

123203024
0414 3561: RNCC: 3 | RNVC: 2
1420878: RNCC: 5 | RNVC: 2
4079860: RNCC: 5 | RNVC: 2
4788784: RNCC: 5 | RNVC: 9
04143561EE0148-40: RNCC: 5 | RNVC: 9

29 Dec 1989

5340-12-702-1801
Angle Bracket

127021801
VG95211-ML-127021801: RNCC: 2 | RNVC: 2
30.7204.180: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-7651
Nonmetallic Bumper

123497651
U60.100000.07-00: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-329-5168
Rod End Clevis

123295168
160-80056-02: RNCC: 3 | RNVC: 2
160-80056-02: RNCC: 5 | RNVC: 2
160-80056.02: RNCC: 5 | RNVC: 2
15160-80056.02: RNCC: 5 | RNVC: 9
160-80056.02: RNCC: 5 | RNVC: 9

26 Aug 1992

5340-12-351-5782
Spring Loaded Cylinder Fastener

123515782
SG1514 FE/ZN5D: RNCC: 3 | RNVC: 2
SG 1514-VZ: RNCC: 5 | RNVC: 2

4 Aug 2000

5340-12-175-3799
Handle Grip

121753799
1680510007: RNCC: 3 | RNVC: 9
EFNH2Y1X: RNCC: 5 | RNVC: 9

11 Sep 1978

5340-12-311-6150
Helical Compression Spring Seat

123116150
2410516002: RNCC: 3 | RNVC: 2
OD20582: RNCC: 5 | RNVC: 2
2410516002: RNCC: 5 | RNVC: 2
23310148022: RNCC: 5 | RNVC: 2

25 Sep 1987

5340-12-394-6432
Elastic Strap

123946432
BSAP015: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-174-6503
Retaining Strap

121746503
3133321R1: RNCC: 3 | RNVC: 2

17 Jul 1978

5340-12-356-1489
Webbing Strap

123561489
4617900379: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-367-9582
Rim Latch

123679582
101837: RNCC: 3 | RNVC: 2
4309: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-152-8077

5340-12-175-8797
Angle Bracket

121758797
4258350014: RNCC: 3 | RNVC: 2
A4258350014: RNCC: 5 | RNVC: 2

25 Oct 1978

5340-12-135-6818

5340-12-137-6164

5340-12-300-9434
Angle Bracket

123009434
01TL12582: RNCC: 3 | RNVC: 2
01TL12582: RNCC: 5 | RNVC: 9

13 Sep 1984

5340-12-043-9171

5340-12-185-3196
Dust And Moisture Seal Protective Plug

121853196
3553416: RNCC: 3 | RNVC: 2

30 Sep 1980

5340-12-025-8062

5340-12-327-5165
Runner

123275165
9000 1147: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-12-357-9117
Lock-Release Lever

123579117
11143102: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-181-4705
Mounting Bracket

121814705
PAN3836: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-12-319-8241
Mending Plate

123198241
5802006-665000.01: RNCC: 2 | RNVC: 2
5802006-665000.01: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-12-314-3664
Mending Plate

123143664
5610063: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-12-162-2666
Butt Hinge

121622666
65202-06040B01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-360-1386
Ball Socket Seat

123601386
DIN71805-B16-A3C: RNCC: 2 | RNVC: 2
9803050161: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-12-375-9351
Flush Lock

123759351
208-9051: RNCC: 3 | RNVC: 2
612-740-0041: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-12-328-5163
Rod End Clevis

123285163
DIN71752-G6X12LH-A3P: RNCC: 2 | RNVC: 2
DIN71752-G6X12LH-A3P: RNCC: 3 | RNVC: 2

27 May 1992

5340-12-356-7495
Helical Compression Spring Retainer

123567495
1283-0003: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-315-5984
Retaining Strap

123155984
DIN3016-1-F1-20X15-W5-CR: RNCC: 2 | RNVC: 2
RSGU2.20/15-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-20X15-W5: RNCC: 3 | RNVC: 2
VG95931F20X15W5: RNCC: 5 | RNVC: 9
DIN3016-F1-20X15-W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-196-8332
Spring Tension Clip

121968332
588.70-510200-004: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-168-4649
Resilient Mount

121684649
7507911: RNCC: 3 | RNVC: 9
02521482: RNCC: 5 | RNVC: 2
2521482ED5049-04: RNCC: 5 | RNVC: 2

15 Mar 1977

5340-12-181-2817
Mending Plate

121812817
1361044-12000-09: RNCC: 3 | RNVC: 2

9 Nov 1979

5340-12-383-9537
Caster Set

123839537
S80040-00: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-340-3419
Lock-Release Lever

123403419
1566348: RNCC: 3 | RNVC: 2

27 Mar 1996

5340-12-304-0104
Metal Runner

123040104
52.3093.440.11: RNCC: 3 | RNVC: 2

30 May 1985

5340-12-344-3516
Retaining Strap

123443516
28201870345: RNCC: 3 | RNVC: 2
28201870345 E1: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-312-2500
Angle Bracket

123122500
100000637: RNCC: 2 | RNVC: 2
100000637: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-12-359-7403
Recess Handle

123597403
300.018.628: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-324-0328
Angle Bracket

123240328
66.3579.314.02-A001: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-12-373-9740
Mending Plate

123739740
8712033040: RNCC: 3 | RNVC: 2

4 Jan 2008

5340-12-389-1656
Retaining Strap

123891656
565532: RNCC: 3 | RNVC: 2
565532: RNCC: 5 | RNVC: 2
2500600767: RNCC: 5 | RNVC: 2
07410168: RNCC: 5 | RNVC: 9

31 May 2012

5340-12-167-3288
Mending Plate

121673288
CF 414 608: RNCC: 2 | RNVC: 2
CF 414 608: RNCC: 3 | RNVC: 2
CF414608: RNCC: 5 | RNVC: 2
CF 414 608: RNCC: 5 | RNVC: 2
CF 414 608: RNCC: 5 | RNVC: 2
CF414608: RNCC: 5 | RNVC: 2
CF414608: RNCC: 5 | RNVC: 2

14 Dec 1976

5340-12-135-6816

5340-12-316-2940
Mending Plate

123162940
6377621: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-315-0214
Webbing Strap

123150214
160-26284: RNCC: 3 | RNVC: 2
160-26284: RNCC: 5 | RNVC: 9

8 Sep 1988

5340-12-307-2451
Double Angle Bracket

123072451
RP981738: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-151-8921
Friction Catch Stud

121518921
9122.001.4: RNCC: 3 | RNVC: 2
139-02-05-1: RNCC: 5 | RNVC: 2
19000060: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-331-1395
Swivel Caster

123311395
11444001: RNCC: 2 | RNVC: 2
11444001: RNCC: 3 | RNVC: 2
11444001: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-12-010-7381

5340-12-190-8198
Resilient Mount

121908198
SP 406A-274: RNCC: 3 | RNVC: 2
SP 406-274: RNCC: 5 | RNVC: 9
SP406-274: RNCC: 5 | RNVC: 9

16 Dec 1981

5340-12-329-1264
Extension Drawer Slide

123291264
5800583-094710.201: RNCC: 2 | RNVC: 2
GC447-1014RH: RNCC: 3 | RNVC: 2

21 Jul 1992

5340-12-378-3554
Mounting Bracket

123783554
41012364: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-357-5416
Loop Clamp

123575416
5581097: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-357-9026
Dust And Moisture Seal Protective Cover

123579026
2300042-255153.000: RNCC: 2 | RNVC: 2
2300042-255153.000: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-379-5598
Spring Tension Clip

123795598
S259M8057242: RNCC: 3 | RNVC: 2

7 Aug 2009

5340-12-377-1776
Blank Panel

123771776
T251M0013109: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-027-3364

5340-12-042-5786

5340-12-314-8331
Hand Crank

123148331
2500167-300100: RNCC: 2 | RNVC: 2
2500167-300100: RNCC: 3 | RNVC: 2
2500167-300100: RNCC: 5 | RNVC: 9

16 Aug 1988

5340-12-391-4244
Access Cover

123914244
I006335: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-133-7268
Snap Hook

121337268
BSAM007: RNCC: 3 | RNVC: 2
STM 12N.12: RNCC: 5 | RNVC: 9
S0012.045: RNCC: 5 | RNVC: 9
ESAU001: RNCC: 5 | RNVC: 9
STM12N12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-1574
Mending Plate

121981574
RP981779: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-328-9775
Door Button

123289775
272.310 903: RNCC: 2 | RNVC: 2
272.310.903: RNCC: 3 | RNVC: 2
272.310 903: RNCC: 5 | RNVC: 9

4 Jul 1992

5340-12-366-8977
Rim Latch

123668977
1085-U1: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-321-9008
Double Angle Bracket

123219008
3815200733: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-12-359-7374
Multiple Angle Bracket

123597374
S284M3012101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-320-0203
Dust And Moisture Seal Protective Plug

123200203
GL50SCHWARZ: RNCC: 3 | RNVC: 2

28 Nov 1989

5340-12-388-7518
Clamp Bolt Assembly

123887518
PAN6623A: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-364-4311
Angle Bracket

123644311
54.1107.506.00: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-155-1669
Rod End Clevis

121551669
160-22686: RNCC: 3 | RNVC: 2
160-22686: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-6456
Mounting Bracket

123666456
BD5.250.178.230: RNCC: 3 | RNVC: 2

19 May 2005

5340-12-179-7370
Webbing Strap

121797370
T12983: RNCC: 3 | RNVC: 2
T12954: RNCC: 5 | RNVC: 2
T12983: RNCC: 5 | RNVC: 9

25 Jul 1979

5340-12-334-4911
Spacing Threaded Standoff

123344911
1676674800: RNCC: 3 | RNVC: 2
16766748: RNCC: 5 | RNVC: 2

16 May 1994

5340-12-316-2889
Rod End Clevis

123162889
5186389: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-326-9621
Permanent Magnet

123269621
871712: RNCC: 3 | RNVC: 2
OM25 BLAU: RNCC: 3 | RNVC: 2

13 Nov 1991

5340-12-315-4042
Dust And Moisture Seal Protective Cap

123154042
1460508304: RNCC: 3 | RNVC: 2
1460508304: RNCC: 5 | RNVC: 2

19 Oct 1988

5340-12-044-3086

5340-12-312-2582
Mending Plate

123122582
30819-597: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-12-326-8965
Mounting Bracket

123268965
1280505-13: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-316-1507
Mounting Bracket

123161507
3094272941: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-125-0484
Riegel

121250484
30355621210000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-381-4964
Angle Bracket

123814964
4040000501: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-12-355-5367
Mechanical Stop

123555367
2125-131210.02B: RNCC: 2 | RNVC: 2
2125-131210.02B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-319-0879
Catch Strike

123190879
2654-332000.04: RNCC: 2 | RNVC: 2
2654-332000.04: RNCC: 3 | RNVC: 2
2654-332 000.04: RNCC: 5 | RNVC: 9
679-02000000.04: RNCC: 5 | RNVC: 9
679-02000000.04: RNCC: 5 | RNVC: 9

6 Sep 1989

5340-12-367-1099
Angle Bracket

123671099
947631577: RNCC: 3 | RNVC: 2
3202-860.01.00.041-003: RNCC: 5 | RNVC: 2

11 Jul 2005

5340-12-163-7465
Retaining Strap

121637465
T5001: RNCC: 3 | RNVC: 2
5001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-315-0447
Dust And Moisture Seal Protective Plug

123150447
13N15042SW: RNCC: 3 | RNVC: 2
915042 013001: RNCC: 5 | RNVC: 2

9 Sep 1988

5340-12-196-4894
Mending Plate

121964894
5801435-040000.02: RNCC: 2 | RNVC: 2
5801435-040000.02: RNCC: 3 | RNVC: 2
5801435-040000-02: RNCC: 5 | RNVC: 2

12 Jul 1983

5340-12-346-0187
Access Cover

123460187
251776010400: RNCC: 3 | RNVC: 2
(241)A424960178225: RNCC: 5 | RNVC: 2
60178225: RNCC: 5 | RNVC: 2
251776010400: RNCC: 5 | RNVC: 2
251776010400: RNCC: 5 | RNVC: 2
06820P019002: RNCC: 5 | RNVC: 2
251776010400: RNCC: 5 | RNVC: 2
0-121834: RNCC: 8 | RNVC: 2

29 May 1998

5340-12-321-2931
Access Cover

123212931
409088255: RNCC: 3 | RNVC: 2
3101-42-01.14: RNCC: 5 | RNVC: 2
3101-42-01200.00: RNCC: 5 | RNVC: 2
R3101-42-01.14: RNCC: 5 | RNVC: 2
409.088255: RNCC: 5 | RNVC: 2

30 Apr 1990

5340-12-702-0229
Loop Clamp

127020229
VG95211-ML-127020229: RNCC: 2 | RNVC: 2
200N7-140: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-5827
Angle Bracket

123655827
J28130113-406: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-188-3853
Spring Tension Clip

121883853
11909: RNCC: 3 | RNVC: 2
86002555: RNCC: 5 | RNVC: 2
86002555EE5511-04: RNCC: 5 | RNVC: 2
01-1604: RNCC: 5 | RNVC: 2
A0022174023: RNCC: 5 | RNVC: 2

6 Jul 1981

5340-12-302-6495
Angle Bracket

123026495
GM5355-2: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-322-5066
Mending Plate

123225066
076-122900-903-0: RNCC: 2 | RNVC: 2
076-122900-903-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-382-6951
Retaining Strap

123826951
806280603: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-174-6039
Hasp Staple

121746039
4119880291: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-12-393-3782
Angle Bracket

123933782
11.29225-0013: RNCC: 3 | RNVC: 2
11.29225-0013: RNCC: 5 | RNVC: 2

12 Sep 2013

5340-12-336-4132
Lock-Release Lever

123364132
GN300-45-M5-16-SW: RNCC: 3 | RNVC: 2
GN-300.45-M5.16: RNCC: 5 | RNVC: 2

14 Nov 1994

5340-12-321-9048
Filler Opening Cap

123219048
NO PRIMARY REF 12-321-9048: RNCC: 3 | RNVC: 2
0000181502: RNCC: 5 | RNVC: 2
0000181502: RNCC: 5 | RNVC: 2
0000181502: RNCC: 5 | RNVC: 2
01050-00-006: RNCC: 5 | RNVC: 9

9 Jul 1990

5340-12-386-4687
Rod End Clevis

123864687
009-221.275-011: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-359-4369
Loop Clamp

123594369
DIN3016-1-E1-32X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-701-8175
Angle Bracket

127018175
VG95211-ML-127018175: RNCC: 2 | RNVC: 2
5.12.9205.0500.09: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-7363
Multiple Angle Bracket

123657363
9444320440: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-12-326-3704
Mending Plate

123263704
3963000440: RNCC: 3 | RNVC: 2
396 300 04 40: RNCC: 5 | RNVC: 2

6 Sep 1991

5340-12-338-1545
Retaining Strap

123381545
8935110204: RNCC: 3 | RNVC: 9

30 May 1995

5340-12-307-2423
Elbow Catch

123072423
6239197: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-317-3422
Mounting Bracket

123173422
025251243: RNCC: 3 | RNVC: 2
VW025251243: RNCC: 5 | RNVC: 2
025 251 243: RNCC: 5 | RNVC: 2

29 Mar 1989

5340-12-323-0585
Resilient Mount

123230585
6753200050: RNCC: 3 | RNVC: 2
675 320 00 50: RNCC: 5 | RNVC: 2

19 Oct 1990

5340-12-394-0922
Permanent Magnet

123940922
NE103: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-312-2258
Door Handle

123122258
100000106: RNCC: 2 | RNVC: 2
100000106: RNCC: 3 | RNVC: 2

7 Dec 1987

5340-12-300-2729
Double Angle Bracket

123002729
160-736606: RNCC: 3 | RNVC: 2
160-736606: RNCC: 5 | RNVC: 9

19 Jul 1984

5340-12-310-8400
Nonmetallic Bumper

123108400
3796601: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-12-358-1986
Mounting Bracket

123581986
3555460343: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-328-6273
Lock-Release Lever

123286273
1350.10.47.00: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-365-0223
Nonmetallic Bumper

123650223
T621P1002209: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-376-4266
Access Cover

123764266
7837013100: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-12-347-0624
Access Cover

123470624
592601-9004.000: RNCC: 3 | RNVC: 2

20 Oct 1998

5340-12-190-2441
Bow Handle

121902441
102862: RNCC: 3 | RNVC: 2

16 Nov 1981

5340-12-350-0770
Double Angle Bracket

123500770
T304M2001215: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-12-353-7999
Angle Bracket

123537999
47125130501: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-365-1214
Loop Clamp

123651214
034 000 007 018: RNCC: 3 | RNVC: 2
6763380045: RNCC: 5 | RNVC: 2

30 Nov 2004

5340-12-310-6896
Angle Bracket

123106896
2300227-351000.002: RNCC: 2 | RNVC: 2
2300227-351000.002: RNCC: 3 | RNVC: 2
2300227-351000.002: RNCC: 5 | RNVC: 9

22 Jun 1987

5340-12-363-1165
Bow Handle

123631165
599.076.008.001: RNCC: 3 | RNVC: 2
81970010568: RNCC: 5 | RNVC: 2

5 May 2004

5340-12-353-7066
Mounting Bracket

123537066
47067921000: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-321-1301
Angle Bracket

123211301
01069400: RNCC: 3 | RNVC: 2

30 Mar 1990

5340-12-313-8105
Mounting Bracket

123138105
3875531540: RNCC: 3 | RNVC: 2
387 553 15 40: RNCC: 5 | RNVC: 2

7 May 1988

5340-12-337-8882
Mounting Bracket

123378882
10 0054 911: RNCC: 3 | RNVC: 2
461 743 02 64: RNCC: 3 | RNVC: 2
4617430264: RNCC: 5 | RNVC: 2

28 Apr 1995

5340-12-162-5070
Electrical-Mechanical Equipment Post

121625070
3402028728: RNCC: 3 | RNVC: 2
34020 28728: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-323-1680
Dust And Moisture Seal Protective Plug

123231680
6012020522: RNCC: 3 | RNVC: 2

30 Oct 1990

5340-12-301-6753
Retaining Strap

123016753
4199160: RNCC: 3 | RNVC: 2
S12B.E03.01.34.001: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-353-3928
Mounting Bracket

123533928
VG95211-ML-123533928: RNCC: 2 | RNVC: 2
GA67076: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-12-324-9873
Nonmetallic Bumper

123249873
52000262: RNCC: 3 | RNVC: 2
SJ5777,TRASP.: RNCC: 3 | RNVC: 2
6L.3756.009.00-441719: RNCC: 5 | RNVC: 2
SJ5777: RNCC: 5 | RNVC: 2

18 Apr 1991

5340-12-174-2956
Loop Clamp

121742956
1301311033: RNCC: 3 | RNVC: 2
8781311005: RNCC: 3 | RNVC: 9
81908010280: RNCC: 5 | RNVC: 2
LMR18-1X: RNCC: 5 | RNVC: 2
8781311005: RNCC: 5 | RNVC: 9
1301311033: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-313-4476
Resilient Mount

123134476
RD215HD-MN45: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-12-343-1353
Rod End Clevis

123431353
5026-028: RNCC: 3 | RNVC: 2

6 May 1997

5340-12-302-7874
Nonmetallic Bumper

123027874
CF 493 331: RNCC: 3 | RNVC: 2
CF 493 331: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-199-6286
Clamping Catch

121996286
14L16-1AA: RNCC: 3 | RNVC: 2

17 May 1984

5340-12-311-8432
Access Cover

123118432
2300074-3008.00: RNCC: 2 | RNVC: 2
2300074-3008.00: RNCC: 3 | RNVC: 2
2300074-3008.00: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-179-3004
Nonmetallic Bumper

121793004
1079870240: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-198-1915
Helical Compression Spring Retainer

121981915
1420328019: RNCC: 3 | RNVC: 2
1420328019: RNCC: 5 | RNVC: 2
VDPM00706: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-305-9381
Detent Plunger

123059381
12706-1350: RNCC: 2 | RNVC: 2
332109-9135.000: RNCC: 3 | RNVC: 2
332109-9135.000: RNCC: 5 | RNVC: 9

10 Jan 1986

5340-12-127-8045

5340-12-390-5236
Block Clamp

123905236
7066624: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-12-387-8462
Pipe Hanger

123878462
7093705: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-307-1577
Double Angle Bracket

123071577
4217230014: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-378-5238
Mending Plate

123785238
0201085: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-12-385-4997
Lock-Release Lever

123854997
00001-079A: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-341-7723
Strap Fastener Loop

123417723
KOPPELOESE: RNCC: 3 | RNVC: 2

25 Oct 1996

5340-12-326-1378
Mounting Plate

123261378
272.362.119: RNCC: 3 | RNVC: 2
272.362 119: RNCC: 5 | RNVC: 9

12 Aug 1991

5340-12-337-0657
Angle Bracket

123370657
88417010013: RNCC: 3 | RNVC: 2
88.41701.0013: RNCC: 5 | RNVC: 2

17 Jan 1995

5340-12-376-4642
Mounting Bracket

123764642
5800.8662: RNCC: 3 | RNVC: 2
BK206440: RNCC: 5 | RNVC: 2
80061438: RNCC: 5 | RNVC: 2

2 Oct 2008

5340-12-307-2442
Mending Plate

123072442
RP981742: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-373-6913
Angle Bracket

123736913
5562038940: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-12-178-0105
Mounting Bracket

121780105
3816820086: RNCC: 3 | RNVC: 2

14 Mar 1979

5340-12-343-8247
Dust And Moisture Seal Protective Plug

123438247
WRYUG2119: RNCC: 3 | RNVC: 2
93163623: RNCC: 3 | RNVC: 2

1 Aug 1997

5340-12-358-8753
Latch Bar

123588753
226.07.209: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-194-8896
Grooved Clamp Coupling

121948896
M472189: RNCC: 3 | RNVC: 9
M472189: RNCC: 5 | RNVC: 2

15 Dec 1982

5340-12-314-1247
Bridge Clamp

123141247
6205410526: RNCC: 3 | RNVC: 2
620 541 05 26: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-163-5065
Retaining Strap

121635065
4039950410: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-145-6918
Nut And Bolt Locking Plate

121456918
3129941301: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-304-4823
Double Angle Bracket

123044823
2300106-620000.01: RNCC: 2 | RNVC: 2
2300106-620000.01: RNCC: 3 | RNVC: 2
2300106-620000.01: RNCC: 5 | RNVC: 9
2300106-620000.01: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-308-7044
Access Cover

123087044
0508201: RNCC: 3 | RNVC: 2

10 Nov 1986

5340-12-180-6313
Resilient Mount

121806313
0003233885: RNCC: 3 | RNVC: 2
99618200590: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-136-1672
Loop Clamp

121361672
81974010131: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-323-9288
Catch Strike

123239288
476405: RNCC: 2 | RNVC: 2
476405: RNCC: 3 | RNVC: 2
476405: RNCC: 5 | RNVC: 2
476405: RNCC: 5 | RNVC: 9

9 Jan 1991

5340-12-193-5968
Friction Catch

121935968
16106-3100.02: RNCC: 3 | RNVC: 2

9 Aug 1982

5340-12-314-8330
Access Cover

123148330
GLZ9300428R1: RNCC: 3 | RNVC: 2

16 Aug 1988

5340-12-355-0557
Dust And Moisture Seal Protective Cap

123550557
246082: RNCC: 3 | RNVC: 2

27 Sep 2001

5340-12-382-5813
Antipilferage Seal Locking Wire

123825813
902000.0000: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-12-360-3535
Spring Tension Clip

123603535
0009550831: RNCC: 3 | RNVC: 2
0009550831: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-315-2524
Dust And Moisture Seal Protective Plug

123152524
3819972186: RNCC: 3 | RNVC: 2
381 997 21 86: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-308-1399
Electrical-Mechanical Equipment Post

123081399
2859060686: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-022-5181

5340-12-380-2982
Dust And Moisture Seal Protective Plug

123802982
0019975186: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-12-352-6587
Mounting Bracket

123526587
P-076036-001: RNCC: 3 | RNVC: 2
P076036-001: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-12-300-1361
Bridge Clamp

123001361
2500075-198500.002.0: RNCC: 2 | RNVC: 2
2500075-198500.002.0: RNCC: 3 | RNVC: 2

6 Jul 1984

5340-12-197-7690
Angle Bracket

121977690
A-145401-079: RNCC: 3 | RNVC: 2
A145401-079: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-186-8055
Electrical-Mechanical Equipment Post

121868055
VG95148B5XM2,5X98-1.4301: RNCC: 2 | RNVC: 2
VG95148B5XM2,5X98-1.4301: RNCC: 3 | RNVC: 2
028-951000-03-0: RNCC: 3 | RNVC: 2

6 Feb 1981

5340-12-700-8576
Threaded End Tensioning Tie Rod

127008576
155N1220-20-1,5-929: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-346-6451
Clamping Catch

123466451
14L11-5-1AA: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-12-393-2257
Mounting Actuator Plate

123932257
106-1-3418: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-12-334-8188
Angle Bracket

123348188
XB712: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-374-2949
Loop Clamp

123742949
5308398: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-378-9009
Webbing Strap

123789009
7849016010AB: RNCC: 3 | RNVC: 2

27 May 2009

5340-12-379-3621
Mounting Bracket

123793621
0105861: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-12-188-1501
Mounting Bracket

121881501
0024616: RNCC: 3 | RNVC: 2
24616: RNCC: 5 | RNVC: 2

9 Jun 1981

5340-12-361-9797
Access Cover

123619797
1813-306: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-166-0137
Plain Solid Disk

121660137
03025: RNCC: 3 | RNVC: 2
03025: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-390-8447
Pipe Hanger

123908447
5821750141: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-12-317-3274
Resilient Mount

123173274
0118079-11MN60: RNCC: 3 | RNVC: 2
81.96210.0150: RNCC: 5 | RNVC: 2
81962100150: RNCC: 5 | RNVC: 2

29 Mar 1989

5340-12-339-4499
Helical Compression Spring Seat

123394499
4220 303 039: RNCC: 3 | RNVC: 2
4220303039: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-165-5136
Retaining Strap

121655136
PAN6483AA: RNCC: 3 | RNVC: 2
PAN6483A: RNCC: 5 | RNVC: 2

25 May 1976

5340-12-392-3607
Mounting Plate

123923607
I010591TAN686A: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-392-7841
Retaining Strap

123927841
239.68.014: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-12-348-5557
Lock-Release Lever

123485557
EZ17733: RNCC: 3 | RNVC: 2
1773301: RNCC: 5 | RNVC: 2

16 Jul 1999

5340-12-011-5433

5340-12-354-4060
Access Cover

123544060
F07090: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-340-1371
Mounting Bracket

123401371
726 30540 AAAA: RNCC: 3 | RNVC: 2

5 Mar 1996

5340-12-352-2358
Loop Clamp

123522358
5206617: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-12-367-8455
Angle Bracket

123678455
2300421-251400.009: RNCC: 2 | RNVC: 2
2300421-251400.009: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-12-199-4823
Angle Bracket

121994823
7801850008: RNCC: 3 | RNVC: 2
78018 50008: RNCC: 5 | RNVC: 9

1 May 1984

5340-12-315-7940
Dust And Moisture Seal Protective Plug

123157940
51960020004: RNCC: 3 | RNVC: 2
51.96002-0004: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-313-6048
Mending Plate

123136048
2300013-6508.04: RNCC: 2 | RNVC: 2
2300013-6508.04: RNCC: 3 | RNVC: 2
2300013-6508.04: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-12-190-7603
Sealing Plug Assembly

121907603
JJ52384: RNCC: 3 | RNVC: 2

14 Dec 1981

5340-12-307-7551
Rod End Connector

123077551
RP988644: RNCC: 3 | RNVC: 2

23 Jul 1986

5340-12-167-2867
Angle Bracket

121672867
66-3524-127-00A001: RNCC: 3 | RNVC: 2

8 Dec 1976

5340-12-359-6398
Angle Bracket

123596398
2500294-060-01: RNCC: 3 | RNVC: 2

24 Feb 2003

5340-12-144-8755
Halter

121448755
CTAN16450: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-191-2513
Bow Handle

121912513
2500058-130000.01: RNCC: 2 | RNVC: 2
2500058-130000.01: RNCC: 3 | RNVC: 2
2500058-130000.01: RNCC: 3 | RNVC: 2
2500058-130000.01: RNCC: 5 | RNVC: 2
2500058-130000.01: RNCC: 5 | RNVC: 9
2500058-130000.01: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-339-7660
Clamping Catch

123397660
8407371005: RNCC: 3 | RNVC: 2
112L31-1X2-CC: RNCC: 5 | RNVC: 2
112L31-1X2CC: RNCC: 5 | RNVC: 2
84073 71005: RNCC: 5 | RNVC: 9

15 Jan 1996

5340-12-154-3972
Bow Handle

121543972
R60-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-8487
Loop Clamp

127018487
VG95211-ML-127018487: RNCC: 2 | RNVC: 2
5191A-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-4175
Spring Tension Clip

123314175
80.10.007-4: RNCC: 3 | RNVC: 2

4 May 1993

5340-12-306-6586
Double Angle Bracket

123066586
23114-1937.00: RNCC: 2 | RNVC: 2
23114-1937-00: RNCC: 3 | RNVC: 2
23114-1937-00: RNCC: 5 | RNVC: 9
23114-1937-00: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-12-351-0653
Butt Hinge Leaf

123510653
J52422162-001: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-12-367-3066
Loop Clamp

123673066
83155015507: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-12-329-0543
Filler Opening Cap

123290543
00.003.99.120: RNCC: 3 | RNVC: 2
81061110017: RNCC: 3 | RNVC: 2
00 003 99 120: RNCC: 5 | RNVC: 9
0000399120: RNCC: 5 | RNVC: 9
81.06111-0017: RNCC: 5 | RNVC: 9

14 Jul 1992

5340-12-328-9510
Resilient Mount

123289510
069903147A: RNCC: 3 | RNVC: 2
069903147A: RNCC: 5 | RNVC: 2
069.903.147A: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-365-9294
Mounting Bracket

123659294
9424292068: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-043-3618

5340-12-011-4489

5340-12-332-3285
Dust And Moisture Seal Protective Plug

123323285
2501056229: RNCC: 3 | RNVC: 2
0009871645: RNCC: 5 | RNVC: 2

29 Jul 1993

5340-12-387-8257
Flush Lock

123878257
XP52799100191: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-321-1638
Access Cover

123211638
01047200: RNCC: 3 | RNVC: 2

6 Apr 1990

5340-12-334-3537
Access Door

123343537
CF 833 458 AE: RNCC: 2 | RNVC: 2
CF 833 458 AE: RNCC: 3 | RNVC: 2
CF 833 458 AE: RNCC: 5 | RNVC: 2
CF833458AE: RNCC: 5 | RNVC: 2

29 Apr 1994

5340-12-326-2084
Angle Bracket

123262084
3964661140: RNCC: 3 | RNVC: 2
396 466 11 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-321-5694
Angle Bracket

123215694
110050: RNCC: 3 | RNVC: 2
110050: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-333-2121
Mounting Plate

123332121
00098331180: RNCC: 3 | RNVC: 9
328-070003.000: RNCC: 5 | RNVC: 9
98331180: RNCC: 5 | RNVC: 9

10 Nov 1993

5340-12-091-4485

5340-12-141-6561

5340-12-304-9586
Mending Plate

123049586
5801761-130000.002: RNCC: 2 | RNVC: 2
5801761-130000.002: RNCC: 3 | RNVC: 2

10 Sep 1985

5340-12-349-7514
Butt Hinge Leaf

123497514
J52432610-001: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-172-7036
Mending Plate

121727036
1224-216.12: RNCC: 2 | RNVC: 2
532008-0104.000: RNCC: 3 | RNVC: 2
1224-216.12: RNCC: 5 | RNVC: 9
1224-216-12: RNCC: 5 | RNVC: 9
532008-0104.000: RNCC: 5 | RNVC: 9
532008-104: RNCC: 5 | RNVC: 9

13 Feb 1978

5340-12-313-1884
Angle Bracket

123131884
P-896440-409: RNCC: 3 | RNVC: 2
P896440-409: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-302-0934
Lock-Release Lever

123020934
23176-189232.00.0: RNCC: 2 | RNVC: 2
23176-189232.00.0: RNCC: 3 | RNVC: 2
23176-189232-00-0: RNCC: 5 | RNVC: 9
23176-189232.00.0: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-12-371-2192
Nonmetallic Bumper

123712192
5.767-014.0: RNCC: 3 | RNVC: 2
5.767-014: RNCC: 5 | RNVC: 9

1 Mar 2007

5340-12-393-3568
Mounting Bracket

123933568
10187-003141.000.0: RNCC: 2 | RNVC: 2
10187-003141.000.0: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-313-4253
Mending Plate

123134253
1030001452: RNCC: 3 | RNVC: 2
3100/2173-02-00-02: RNCC: 5 | RNVC: 2
3100/2173-02-00-02: RNCC: 5 | RNVC: 9

30 Mar 1988

5340-12-348-9876
Mechanical Stop

123489876
245/7346-56-00-00/03: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-166-0201
Lock-Release Lever

121660201
06430-3103X40: RNCC: 3 | RNVC: 2
643.1310X40-15GRAD: RNCC: 5 | RNVC: 9
NLM643-3103X40: RNCC: 5 | RNVC: 9
NLM643-310X40MM15GRAD: RNCC: 5 | RNVC: 9
NLM6430-3103X40: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-185-0701
Nonmetallic Bumper

121850701
556-865000-020: RNCC: 3 | RNVC: 2

6 Sep 1980

5340-12-184-6694
Handle Grip

121846694
65-7723-502-00A001: RNCC: 3 | RNVC: 2
13C00-1220-09H02: RNCC: 5 | RNVC: 2

12 Aug 1980

5340-12-380-3843
Mounting Bracket

123803843
197.003-058: RNCC: 3 | RNVC: 2

26 Oct 2009

5340-12-354-4144
Mounting Bracket

123544144
VG95211-ML-123544144: RNCC: 2 | RNVC: 2
E31201 -00: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-185-2291
Manual Control Handle

121852291
525241057: RNCC: 3 | RNVC: 2
5801416-360: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-308-0517
Spring Tension Clip

123080517
958010-01.11: RNCC: 3 | RNVC: 2

26 Aug 1986

5340-12-311-2576
Nonmetallic Bumper

123112576
47192-002: RNCC: 3 | RNVC: 2
47 192-002: RNCC: 5 | RNVC: 9

11 Aug 1987

5340-12-192-5248
Snap Hook

121925248
2221620001: RNCC: 3 | RNVC: 2
3130105055: RNCC: 5 | RNVC: 2
31301 050 55: RNCC: 5 | RNVC: 2
31301-050-55: RNCC: 5 | RNVC: 2
31301/050/55: RNCC: 5 | RNVC: 2
22216 20001: RNCC: 5 | RNVC: 9

3 May 1982

5340-12-198-9011
Compression Cup

121989011
T30-13-88NBR/101: RNCC: 3 | RNVC: 2
20-651-06: RNCC: 5 | RNVC: 2

13 Mar 1984

5340-12-194-3897
Catch Strike

121943897
291827527: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-380-5682
Snap-In Plain Standoff

123805682
HP3260BWS12: RNCC: 3 | RNVC: 2

10 Nov 2009

5340-12-194-3748
Angle Bracket

121943748
65.7096.200.03-A002: RNCC: 3 | RNVC: 2
253789: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-383-3787
Mechanic Equipment Hardware Kit

123833787
9011523A: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-12-325-8475
Access Door

123258475
8400270100: RNCC: 3 | RNVC: 2
84002 70100: RNCC: 5 | RNVC: 9

15 Jul 1991

5340-12-344-4001
Double Angle Bracket

123444001
P-296883-435: RNCC: 3 | RNVC: 2
P296883-435: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-390-3274
Spring Loaded Cylinder Fastener

123903274
GN817-5-5-CK-NI: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-199-3204
Resilient Mount

121993204
DIN95363-B25X20-NR70ST: RNCC: 2 | RNVC: 2
1.25.20.3.70NR/ST: RNCC: 5 | RNVC: 2
811.010.025.020.06X20.NR70.ST: RNCC: 5 | RNVC: 2
81110-25X20-M6X20.NR70.ST: RNCC: 5 | RNVC: 2
57810670016: RNCC: 5 | RNVC: 2
781067HART: RNCC: 5 | RNVC: 2
NB08-004.00-017: RNCC: 5 | RNVC: 2
NB08-04-17: RNCC: 5 | RNVC: 9
VG95363-B25X20-NR70ST: RNCC: 5 | RNVC: 9

12 Apr 1984

5340-12-189-4333
Lock-Release Lever

121894333
5801433-082000.01.0: RNCC: 3 | RNVC: 2
5801433-082000-01-0: RNCC: 5 | RNVC: 2
5801433-082000-01-0: RNCC: 5 | RNVC: 9
5801433-082000.01.0: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-12-167-5181
Compression Cup

121675181
H22-6-88NBR/101: RNCC: 3 | RNVC: 2
H22-6-88NBR101: RNCC: 5 | RNVC: 2
6362-256400-01-3TEILNR304: RNCC: 5 | RNVC: 9
SEVA8012TEILNR304: RNCC: 5 | RNVC: 9
6362-256400-01-3TEILNR304: RNCC: 5 | RNVC: 9
SEVA8012TEILNR304: RNCC: 5 | RNVC: 9

28 Dec 1976

5340-12-028-5713

5340-12-011-0424

5340-12-387-4664
Retaining Clip

123874664
2D0615295: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-12-024-9933

5340-12-368-2316
Access Cover

123682316
A221597: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-12-356-7506
Dust And Moisture Seal Protective Plug

123567506
D5237121720000: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-354-2530
Flush Lock

123542530
909223501: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-12-043-6962

5340-12-366-9005
Multiple Angle Bracket

123669005
1753653: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-197-0929
Nonmetallic Bumper

121970929
4358687197: RNCC: 3 | RNVC: 2

19 Sep 1983

5340-12-025-5881

5340-12-343-7904
Double Angle Bracket

123437904
00-28-10-26-15: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-12-182-8086
Mending Plate

121828086
00001123258: RNCC: 3 | RNVC: 2
81.65740-2045: RNCC: 5 | RNVC: 2
81657402045: RNCC: 5 | RNVC: 2

27 Feb 1980

5340-12-161-4075
Retaining Strap

121614075
100332-17400: RNCC: 2 | RNVC: 2
100332-17400: RNCC: 5 | RNVC: 2
100332-17400: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-2671
Angle Bracket

123102671
2300088-711023.04: RNCC: 2 | RNVC: 2
9851471: RNCC: 3 | RNVC: 2
9851471: RNCC: 5 | RNVC: 9

30 Apr 1987

5340-12-338-1710
Double Angle Bracket

123381710
437 524 00 40: RNCC: 3 | RNVC: 2
4375240040: RNCC: 5 | RNVC: 2
A4375240040: RNCC: 5 | RNVC: 2
4375240040: RNCC: 5 | RNVC: 2

31 May 1995

5340-12-392-7920
Rigid Caster

123927920
BK-ALTH125K-3: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-12-371-1699
Mounting Bracket

123711699
FEM-0214AHBP-LI: RNCC: 3 | RNVC: 2
868007701: RNCC: 5 | RNVC: 2

22 Feb 2007

5340-12-340-0403
Helical Compression Spring Seat

123400403
1104-640-0352: RNCC: 3 | RNVC: 2
1104 640 03: RNCC: 5 | RNVC: 2

20 Feb 1996

5340-12-143-0085
Loop Clamp

121430085
DIN3016-1-A1-15X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-15X12-W1-2: RNCC: 3 | RNVC: 2
RS1.15/12: RNCC: 3 | RNVC: 2
RS1100-15-12: RNCC: 5 | RNVC: 2
4110012015: RNCC: 5 | RNVC: 2
RS1100.15/12: RNCC: 5 | RNVC: 2
DIN3016-A1-15X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-A15X12-W1: RNCC: 5 | RNVC: 9
VG95931A15X12W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-346-1362
Electronic Equipment Hardware Kit

123461362
VG95211-ML-123461362: RNCC: 2 | RNVC: 2
7801767205: RNCC: 3 | RNVC: 2
78017 67205: RNCC: 5 | RNVC: 9

17 Jun 1998

5340-12-378-1897
Clamping Catch

123781897
GN831-100-A-ST: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-392-5670
Sliding Door Hanger

123925670
6000062-194260.000.0: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-12-322-4061
Pipe Bracket

123224061
VG95211-ML-123224061: RNCC: 2 | RNVC: 2
S36132-01-2-233: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-12-344-8991
Mounting Bracket

123448991
2300109-097100.003.0: RNCC: 2 | RNVC: 2
2300109-097100.003.0: RNCC: 3 | RNVC: 2

8 Jan 1998

5340-12-197-4071
Nonmetallic Solid Wheel

121974071
5801807-2000.06: RNCC: 2 | RNVC: 2
5801807-2000-06: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-315-4784
Angle Bracket

123154784
5802005-201900.08: RNCC: 2 | RNVC: 2
65.7789.255.08-A001: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-12-324-3476
Lock-Release Lever

123243476
335948-0806.000: RNCC: 2 | RNVC: 2
335948-0806.000: RNCC: 3 | RNVC: 2
335948-0806.000: RNCC: 5 | RNVC: 9

7 Feb 1991

5340-12-153-6084
Nut And Bolt Locking Plate

121536084
100355-114000.10: RNCC: 2 | RNVC: 2
100355-114000.10: RNCC: 3 | RNVC: 2
100355-114000-10: RNCC: 5 | RNVC: 2
100355-114000.10: RNCC: 5 | RNVC: 9
100355-114000-10: RNCC: 5 | RNVC: 9
100355-114000-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-5504
Retaining Strap

121665504
471-28: RNCC: 3 | RNVC: 2

21 Sep 1976

5340-12-319-5426
Access Cover

123195426
731.34.032: RNCC: 3 | RNVC: 2
V731.34.032: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-342-4767
Strap Fastener Loop

123424767
46198850836108: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-12-353-1163
Loop Clamp

123531163
EN4114F25WH1: RNCC: 2 | RNVC: 2

30 Jan 2001

5340-12-364-5165
Helical Compression Spring Seat

123645165
580-161000.003: RNCC: 2 | RNVC: 2
580-161000.003: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-701-6074
Angle Bracket

127016074
VG95211-ML-127016074: RNCC: 2 | RNVC: 2
5.12.7003.1070.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-6916
Angle Bracket

123276916
4900259-109000-10-02: RNCC: 2 | RNVC: 2
536.50-12.10: RNCC: 3 | RNVC: 2
VS5026E167: RNCC: 5 | RNVC: 2
VS5026E167: RNCC: 5 | RNVC: 9

19 Feb 1992

5340-12-311-2498
Angle Bracket

123112498
P-244512-754: RNCC: 3 | RNVC: 2
P244512-754: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-12-317-8891
Access Cover

123178891
40 0166 563: RNCC: 2 | RNVC: 2
40 0166 563: RNCC: 3 | RNVC: 2
40 0166 563: RNCC: 5 | RNVC: 9

23 May 1989

5340-12-393-3714
Cushioning Pad

123933714
4100094-982181.001.0: RNCC: 2 | RNVC: 2
4100094-982181.001.0: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-306-0659
Angle Bracket

123060659
5801984-982900.001.0: RNCC: 2 | RNVC: 2
5801984-982900.001.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-381-9749
Angle Bracket

123819749
10186-180010.004.0: RNCC: 2 | RNVC: 2
10186-180010.004.0: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-12-344-2210
Mounting Bracket

123442210
1221 3305: RNCC: 3 | RNVC: 2
6.234.0.637.195.5: RNCC: 5 | RNVC: 9

1 Oct 1997

5340-12-369-8766
Quick Release Plunger

123698766
GN615.3-M10-K: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-333-3451
Angle Bracket

123333451
81429020166: RNCC: 2 | RNVC: 2
81429020166: RNCC: 3 | RNVC: 2
81.42902.0166: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-12-385-3478
Dust And Moisture Seal Protective Cap

123853478
034-772: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-379-7141
Dust And Moisture Seal Protective Cap

123797141
151115: RNCC: 3 | RNVC: 2

25 Aug 2009

5340-12-355-9609
Webbing Strap

123559609
5400051-773232.00: RNCC: 2 | RNVC: 2
5400051-773232.00: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-368-0739
Angle Bracket

123680739
7801044395AA: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-371-7885
Multiple Angle Bracket

123717885
8404263: RNCC: 3 | RNVC: 2

16 May 2007

5340-12-125-0333
Retaining Strap

121250333
DIN72571-1X6-ST-GESCHWAERZT: RNCC: 2 | RNVC: 2
DIN72571-1X6-ST-GESCHWAERZT: RNCC: 3 | RNVC: 2
1X6DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 2
1X6DIN72571STSWGEBR: RNCC: 5 | RNVC: 2
5730054: RNCC: 5 | RNVC: 2
66376: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-8405
Rigid Caster

123548405
5400049-116812.04: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-347-8802
Catch Strike

123478802
820-1195.7A: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-380-8403
Mounting Plate

123808403
601255-201600.01: RNCC: 2 | RNVC: 2
601255-201600.01: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-350-9168
Access Cover

123509168
6700017-201800.01: RNCC: 2 | RNVC: 2
6700017-201800.01: RNCC: 3 | RNVC: 2

5 Jun 2000

5340-12-173-0807
Detent Plunger

121730807
C42326-A20-C137: RNCC: 3 | RNVC: 2
C42326A20C137: RNCC: 5 | RNVC: 2
5800573-1112-037: RNCC: 5 | RNVC: 2
5800573-1112.037: RNCC: 5 | RNVC: 2

20 Mar 1978

5340-12-306-6585
Retaining Strap

123066585
23110-1900.02: RNCC: 2 | RNVC: 2
23110-1900-02: RNCC: 3 | RNVC: 2
23110-1900-02: RNCC: 5 | RNVC: 9
23110-1900-02: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-12-169-8983
Quick Release Plunger

121698983
BK7013: RNCC: 3 | RNVC: 2
81971205003: RNCC: 5 | RNVC: 2
81.97120-5003: RNCC: 5 | RNVC: 2
263A/XIII: RNCC: 5 | RNVC: 9
BK7013: RNCC: 5 | RNVC: 9
263A13: RNCC: 5 | RNVC: 9

15 Jun 1977

5340-12-329-0744
Bow Handle

123290744
C42080-A20-C277: RNCC: 2 | RNVC: 2
C42080-A20-C277: RNCC: 3 | RNVC: 2

17 Jul 1992

5340-12-326-7865
Butt Hinge Leaf

123267865
279.823 070: RNCC: 3 | RNVC: 2
1392152-350000.006: RNCC: 5 | RNVC: 9

24 Oct 1991

5340-12-372-2336
Angle Bracket

123722336
4538349-001: RNCC: 3 | RNVC: 2
4538349-001: RNCC: 5 | RNVC: 2

29 Jun 2007

5340-12-195-0382
Permanent Magnet

121950382
009-086.191-003: RNCC: 3 | RNVC: 2

5 Jan 1983

5340-12-312-0064
Loop Clamp

123120064
HP120: RNCC: 3 | RNVC: 2
82.07-11: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-340-7371
Dust And Moisture Seal Protective Plug

123407371
81960020018: RNCC: 3 | RNVC: 9
NR. R 3/4": RNCC: 5 | RNVC: 2
81.96002.0018: RNCC: 5 | RNVC: 2
E 4178: RNCC: 5 | RNVC: 2

1 Jun 1996

5340-12-324-4136
Retaining Strap

123244136
23182-9707: RNCC: 2 | RNVC: 2
29490: RNCC: 3 | RNVC: 2
23182-9707: RNCC: 5 | RNVC: 9

14 Feb 1991

5340-12-319-3838
Mending Plate

123193838
C249-A13-C23: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-313-5297
Mounting Bracket

123135297
284-901-160-060: RNCC: 3 | RNVC: 2

13 Apr 1988

5340-12-318-9258
Mending Plate

123189258
VG95529-1ST: RNCC: 2 | RNVC: 2
2903: RNCC: 3 | RNVC: 2
VG95529-1ST-RAL6031F9: RNCC: 5 | RNVC: 2
CVG95529ST: RNCC: 5 | RNVC: 2

25 Aug 1989

5340-12-701-6185
Loop Clamp

127016185
VG95211-ML-127016185: RNCC: 2 | RNVC: 2
5.12.7011.0013.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-175-7912
Dust And Moisture Seal Protective Plug

121757912
4230060404: RNCC: 3 | RNVC: 2
42484170: RNCC: 5 | RNVC: 2
42484170EY5078-28: RNCC: 5 | RNVC: 2
0004210011: RNCC: 5 | RNVC: 2

18 Oct 1978

5340-12-317-7253
Nut And Bolt Locking Plate

123177253
32355-S2 T10: RNCC: 3 | RNVC: 2
32355-S2 T10: RNCC: 5 | RNVC: 9

3 May 1989

5340-12-180-3367
Support Hook

121803367
81618540001: RNCC: 3 | RNVC: 2

5 Sep 1979

5340-12-384-2365
Dust And Moisture Seal Protective Cap

123842365
WM 30993: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-12-369-1765
Leakproof Seal Plug

123691765
05206600: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-321-6551
Access Cover

123216551
66.3571.020.00-A001: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-193-2020
Webbing Strap

121932020
4617900196: RNCC: 3 | RNVC: 2

30 Jun 1982

5340-12-179-2448
Mounting Bracket

121792448
2483401: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-341-5649
Butt Hinge Leaf

123415649
1603601: RNCC: 3 | RNVC: 2
EZ16036: RNCC: 5 | RNVC: 2

21 Sep 1996

5340-12-010-2328

5340-12-197-1239
Nonmetallic Bumper

121971239
3523230385: RNCC: 3 | RNVC: 2

21 Sep 1983

5340-12-150-6362
Spannschloszkoerper

5340-12-150-6614
Verbindungsstueck

5340-12-308-3568
Flush Lock

123083568
E370007652: RNCC: 3 | RNVC: 2
370007652: RNCC: 5 | RNVC: 9

1 Oct 1986

5340-12-311-6179
Loop Clamp

123116179
SL30X6: RNCC: 3 | RNVC: 2
242201505288: RNCC: 5 | RNVC: 2

28 Sep 1987

5340-12-359-0158
Mounting Bracket

123590158
1120-80155.05: RNCC: 3 | RNVC: 2

10 Dec 2002

5340-12-334-2713
Mounting Bracket

123342713
54.0072.142.00: RNCC: 3 | RNVC: 2
54007214200: RNCC: 5 | RNVC: 9

20 Apr 1994

5340-12-186-8643
Dust And Moisture Seal Protective Cap

121868643
025139: RNCC: 3 | RNVC: 2
5800583-094515-006: RNCC: 5 | RNVC: 2

13 Feb 1981

5340-12-183-8519
Mounting Plate

121838519
1237-701-001B: RNCC: 3 | RNVC: 2

24 May 1980

5340-12-163-9815
Threaded End Tensioning Tie Rod

121639815
MK6091-3210: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-196-9812
Angle Bracket

121969812
4900059-212050.000.0: RNCC: 3 | RNVC: 2
4900059-212050-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-340-4966
Metallic Bumper

123404966
23305-312100.44.0: RNCC: 2 | RNVC: 2
0281 3514: RNCC: 3 | RNVC: 2
2813514ED7205-31: RNCC: 5 | RNVC: 2
86 701 2904: RNCC: 5 | RNVC: 2
867012904: RNCC: 5 | RNVC: 2
D867012904: RNCC: 5 | RNVC: 2

23 Apr 1996

5340-12-702-6343
Retaining Strap

127026343
VG95211-ML-127026343: RNCC: 2 | RNVC: 2
84-7208-1270-11: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-8723
Sealing Plug Assembly

123018723
TK.DS-19-53: RNCC: 3 | RNVC: 2
0002510183: RNCC: 5 | RNVC: 2

14 Nov 1984

5340-12-381-9709
Strap Fastener Loop

123819709
71326: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-12-328-5460
Double Angle Bracket

123285460
52.3108.901.20: RNCC: 2 | RNVC: 2
52.3108.901.20: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-162-0248
Nut And Bolt Locking Plate

121620248
0730 749 179: RNCC: 3 | RNVC: 2
0730749179: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-3196
Mounting Plate

123663196
943373617: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-12-341-8047
Headless Straight Rod

123418047
TNR. 101: RNCC: 3 | RNVC: 2
101: RNCC: 5 | RNVC: 2
3475381: RNCC: 5 | RNVC: 2

30 Oct 1996

5340-12-171-3326
Retaining Strap

121713326
81974010591: RNCC: 3 | RNVC: 2

30 Sep 1977

5340-12-300-8426
Angle Bracket

123008426
915060040000: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-186-0355
Dust And Moisture Seal Protective Plug

121860355
WFGS5I: RNCC: 3 | RNVC: 2

25 Nov 1980

5340-12-172-6626
Dust And Moisture Seal Protective Cap-Plug

121726626
610U10: RNCC: 3 | RNVC: 2
323144: RNCC: 5 | RNVC: 2
0019979686: RNCC: 5 | RNVC: 2
GPN610U10: RNCC: 5 | RNVC: 2
9560118150: RNCC: 5 | RNVC: 2
U10: RNCC: 5 | RNVC: 9
U10GPN610: RNCC: 5 | RNVC: 9
GPN610,U10: RNCC: 5 | RNVC: 9
610001000: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-300-8415
Dust And Moisture Seal Protective Cap

123008415
3819190113: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-020-7372

5340-12-374-2482
Access Cover

123742482
L521M3031102: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-353-7068
Access Cover

123537068
47356021100: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-703-2111
Retaining Strap

127032111
VG95211-ML-127032111: RNCC: 2 | RNVC: 2
5184A-34: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-300-7688
Lock-Release Lever

123007688
4252670030: RNCC: 3 | RNVC: 2

29 Aug 1984

5340-12-701-3649
Rod End Connector

127013649
VG95211-ML-127013649: RNCC: 2 | RNVC: 2
5.12.5301.1040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-153-9339
Turnbuckle Body

121539339
DIN1479-SPM12-ST-A3P: RNCC: 2 | RNVC: 2
SP-DIN1479-M12-A3P: RNCC: 3 | RNVC: 2
5500012V: RNCC: 5 | RNVC: 2
M12DIN1479A4C: RNCC: 5 | RNVC: 2
SPM12DIN1479A4C: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-0990
Angle Bracket

123180990
140-133300-911-0: RNCC: 3 | RNVC: 2
66858-760: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-322-4885
Mounting Bracket

123224885
8100397-260-03: RNCC: 2 | RNVC: 2
8100397-260-03: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-300-3638
Clamping Catch

123003638
1504L01-1X1A: RNCC: 3 | RNVC: 2
1504L01: RNCC: 5 | RNVC: 2
0745231215: RNCC: 5 | RNVC: 2

27 Jul 1984

5340-12-325-0489
Rod End Clevis

123250489
8958015192: RNCC: 3 | RNVC: 2

26 Apr 1991

5340-12-314-2280
Nut And Bolt Locking Plate

123142280
4039940730: RNCC: 3 | RNVC: 2
403 994 07 30: RNCC: 5 | RNVC: 2

17 Jun 1988

5340-12-197-1057
Flush Lock

121971057
E4950010090RECHTS: RNCC: 3 | RNVC: 2
0007230901: RNCC: 5 | RNVC: 2

20 Sep 1983

5340-12-333-1525
Loop Clamp

123331525
6B6X28TAN15843: RNCC: 3 | RNVC: 2

4 Nov 1993

5340-12-362-0100
Double Angle Bracket

123620100
15662: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-12-380-6638
Mounting Bracket

123806638
5500781941: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-12-365-7252
Bridge Clamp

123657252
5802017-653000.04: RNCC: 2 | RNVC: 2
5802017-653000.04: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-12-389-0904
Expansion Shield

123890904
061110: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-362-2840
Loop Clamp

123622840
LN9490BK42: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-352-5715
Retaining Strap

123525715
5400051-773215.03: RNCC: 2 | RNVC: 2
5400051-773215.03: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-337-1304
Mounting Bracket

123371304
2782-194600.000.0: RNCC: 2 | RNVC: 2
2782-194600.000.0: RNCC: 3 | RNVC: 2

23 Jan 1995

5340-12-197-5860
Mending Plate

121975860
A-230129-159: RNCC: 3 | RNVC: 2
A230129-159: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-701-5754
Angle Bracket

127015754
VG95211-ML-127015754: RNCC: 2 | RNVC: 2
5.12.6401.0110.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5349
Loop Clamp

127025349
VG95211-ML-127025349: RNCC: 2 | RNVC: 2
5.51.7204.0404.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-369-3337
Handwheel

123693337
2300515-186020.004.0: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-12-300-8559
Double Angle Bracket

123008559
TK-BA35-5340-357: RNCC: 2 | RNVC: 2
M1423 9447: RNCC: 3 | RNVC: 2
1423-948.47(4): RNCC: 5 | RNVC: 9

5 Sep 1984

5340-12-147-4792
Expansion Shield

121474792
NO PRIMARY REF 12-147-4792: RNCC: 3 | RNVC: 2
3500807: RNCC: 5 | RNVC: 2
HUELSEM20X100MITK0NUSVERZINKT: RNCC: 5 | RNVC: 2
2055-1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-1232
Mounting Bracket

123561232
2339-070061A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-134-0630
Resilient Mount

121340630
50008801: RNCC: 3 | RNVC: 2
54040017: RNCC: 5 | RNVC: 2
81100-40X25-M10X20-M10X25.CR45ST: RNCC: 5 | RNVC: 2
0341 2448: RNCC: 5 | RNVC: 2
3412448EE5008-66: RNCC: 5 | RNVC: 2
5135-66-01-06: RNCC: 5 | RNVC: 2
5135-66-01-06: RNCC: 5 | RNVC: 2
5135-66-01.06: RNCC: 5 | RNVC: 2
E5135-66-01-06: RNCC: 5 | RNVC: 2
3412448: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-1228
Spring Tension Clip

121781228
1000096-20.01: RNCC: 3 | RNVC: 2
204545: RNCC: 5 | RNVC: 2
1000096-20-01: RNCC: 5 | RNVC: 9

22 Mar 1979

5340-12-301-7979
Angle Bracket

123017979
1361013-14140.01: RNCC: 3 | RNVC: 2
1361013-14140-01: RNCC: 5 | RNVC: 2

10 Nov 1984

5340-12-199-5453
Nonmetallic Bumper

121995453
2500057-500000.09: RNCC: 2 | RNVC: 2
2500057-500000.09: RNCC: 3 | RNVC: 2
2500057-500000.09: RNCC: 3 | RNVC: 2
2500057-500000.09: RNCC: 3 | RNVC: 2
PLATTE 50X40X3-MIT LOCH 14MMCR75: RNCC: 5 | RNVC: 2
2500057-500000-09: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-181-1731
Mending Plate

121811731
2500035-122000.00: RNCC: 3 | RNVC: 2
2500035-122000.00: RNCC: 5 | RNVC: 9
2500035-122000-00: RNCC: 5 | RNVC: 9

29 Oct 1979

5340-12-359-4965
Helical Compression Spring Seat

123594965
6410.113.030.005: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-175-1258
Angle Bracket

121751258
4356317025: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-12-347-2294
Access Cover

123472294
T622M1001211: RNCC: 3 | RNVC: 2

16 Nov 1998

5340-12-026-8313

5340-12-384-6938
Butt Hinge Leaf

123846938
917347: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-381-5514
Butt Hinge Leaf

123815514
CBD45480P06: RNCC: 3 | RNVC: 2

3 Mar 2010

5340-12-309-5864
Mending Plate

123095864
5126578: RNCC: 3 | RNVC: 2

5 Feb 1987

5340-12-185-4416
Nonmetallic Bumper

121854416
CF402649: RNCC: 3 | RNVC: 2
CF 402 649: RNCC: 5 | RNVC: 2
CF 402 649: RNCC: 5 | RNVC: 2
CF402649: RNCC: 5 | RNVC: 2
CF402649: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-381-7235
Access Cover

123817235
028145111A: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-12-180-4698
Mounting Bracket

121804698
3818110236: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-320-5150
Double Angle Bracket

123205150
H800: RNCC: 3 | RNVC: 2
H800: RNCC: 5 | RNVC: 2
H800: RNCC: 5 | RNVC: 9

23 Jan 1990

5340-12-370-4823
Gleitschienensatz

123704823
26127-530: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-12-010-2708

5340-12-302-2807
Nut And Bolt Locking Plate

123022807
4039940330: RNCC: 3 | RNVC: 2

13 Dec 1984

5340-12-373-1994
Retaining Strap

123731994
1089950520: RNCC: 3 | RNVC: 2
108 995 05 20: RNCC: 5 | RNVC: 2

9 Oct 2007

5340-12-368-2318
Access Cover

123682318
A53538: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-12-373-5564
Elastic Strap

123735564
261150: RNCC: 3 | RNVC: 2

14 Nov 2007

5340-12-368-9530
Halter

123689530
1476290: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-177-5927

5340-12-042-0710

5340-12-334-4380
Mounting Bracket

123344380
4944201386: RNCC: 3 | RNVC: 2
947184: RNCC: 5 | RNVC: 2
120570A: RNCC: 5 | RNVC: 2
947184: RNCC: 5 | RNVC: 9

9 May 1994

5340-12-379-9588
Loop Clamp

123799588
EN4114F28WR1: RNCC: 2 | RNVC: 2
(241)I9005EN4114F28WR1: RNCC: 5 | RNVC: 2

15 Sep 2009

5340-12-351-0217
Access Cover

123510217
1677581: RNCC: 3 | RNVC: 2

15 Jun 2000

5340-12-351-1618
Mounting Bracket

123511618
523429: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-12-321-8815
Mounting Bracket

123218815
4353511840: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-12-307-6881
Electrical-Mechanical Equipment Post

123076881
RP988948: RNCC: 3 | RNVC: 2

16 Jul 1986

5340-12-348-0316
Angle Bracket

123480316
58R059-84612: RNCC: 2 | RNVC: 2
58R059-84612: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-199-6996
Electrical-Mechanical Equipment Post

121996996
606.15-02-00-00-005: RNCC: 3 | RNVC: 2

24 May 1984

5340-12-155-5837
Rod End Connector

121555837
160-80099-25: RNCC: 3 | RNVC: 2
160-80099-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-9799
Butt Hinge Leaf

123059799
1865-010230.01.0: RNCC: 3 | RNVC: 9

16 Jan 1986

5340-12-320-2071
Elastic Strap

123202071
7300037-75: RNCC: 2 | RNVC: 2
4.452-003.0: RNCC: 3 | RNVC: 2
TL 7320-0064 LFD. NR. 9: RNCC: 5 | RNVC: 9
4.452-003: RNCC: 5 | RNVC: 9

18 Dec 1989

5340-12-331-7189
Pipe Bracket

123317189
480/7345-14-00-00/9-11: RNCC: 3 | RNVC: 2
480-7345-14-00-00-9-11: RNCC: 5 | RNVC: 2

15 Jun 1993

5340-12-371-0819
Dust And Moisture Seal Protective Cap-Plug

123710819
330 L 16: RNCC: 3 | RNVC: 2
81.96002-0519: RNCC: 5 | RNVC: 2
81960020519: RNCC: 5 | RNVC: 2

7 Feb 2007

5340-12-190-2442
Bridge Clamp

121902442
9535089: RNCC: 3 | RNVC: 2
1-220-167: RNCC: 5 | RNVC: 9
1.220.167: RNCC: 5 | RNVC: 9

16 Nov 1981

5340-12-702-5451
Mounting Plate

127025451
VG95211-ML-127025451: RNCC: 2 | RNVC: 2
5.51.7210.1170.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-196-6675
Lock-Release Lever

121966675
5802017-210000.00: RNCC: 2 | RNVC: 2
5802017-210000.00: RNCC: 3 | RNVC: 2
5802017-210000.00: RNCC: 3 | RNVC: 2
5802017-210000.00: RNCC: 5 | RNVC: 9
5802017-210000.00: RNCC: 5 | RNVC: 9

1 Aug 1983

5340-12-701-8425
Loop Clamp

127018425
VG95211-ML-127018425: RNCC: 2 | RNVC: 2
5148A-55: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-132-8918
Retaining Strap

121328918
DIN72573-2X15-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-2X15-ST-ZN: RNCC: 3 | RNVC: 2
945533: RNCC: 5 | RNVC: 2
2X15DIN72573ST: RNCC: 5 | RNVC: 9
2X15DIN72573STR0H: RNCC: 5 | RNVC: 9
DIN72573-2X15-ST: RNCC: 5 | RNVC: 9
DIN72573-2X15-ST: RNCC: 5 | RNVC: 9
27410 27214: RNCC: 5 | RNVC: 9
2741027214: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-4812
Angle Bracket

121644812
5801081-77-003: RNCC: 3 | RNVC: 2
5801081-77.003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-8416
Loop Clamp

127018416
VG95211-ML-127018416: RNCC: 2 | RNVC: 2
5148A-25: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-302-8336
Angle Bracket

123028336
4900123-3700.01: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-305-6704
Clamping Catch

123056704
V17L12-1X2AJ: RNCC: 3 | RNVC: 2
024958: RNCC: 5 | RNVC: 2
V17L12-1X2AG: RNCC: 5 | RNVC: 2

3 Dec 1985

5340-12-301-9438
Rod End Clevis

123019438
20-5220-157: RNCC: 3 | RNVC: 2

20 Nov 1984

5340-12-162-2903
Loop Clamp

121622903
03600335: RNCC: 3 | RNVC: 2
036-00335: RNCC: 5 | RNVC: 2
909620115: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-2130
Mounting Bracket

127022130
VG95211-ML-127022130: RNCC: 2 | RNVC: 2
30.7221.210: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-179-1945
Mounting Bracket

121791945
3816820586: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-391-8131
Loop Clamp

123918131
9424310043: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-12-310-2889
Mounting Bracket

123102889
1068830: RNCC: 2 | RNVC: 2
1068830: RNCC: 3 | RNVC: 2

5 May 1987

Load More Results