What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 54 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 54 of 178

5340-12-156-3014
Dust And Moisture Seal Protective Cap

121563014
1410502006: RNCC: 3 | RNVC: 2
EPDSK625C: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-347-6021
Mounting Bracket

123476021
8854 130-111: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-371-2609
Angle Bracket

123712609
30-99070-0139: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-12-300-1388
Helical Compression Spring Seat

123001388
2300002-223200.003: RNCC: 2 | RNVC: 2
2300002-223200.003: RNCC: 3 | RNVC: 2
2300002-223200-003: RNCC: 5 | RNVC: 9
2300002-223200.003: RNCC: 5 | RNVC: 9

6 Jul 1984

5340-12-187-5488
Strap Bolt

121875488
1215 9681: RNCC: 3 | RNVC: 2
12159681: RNCC: 5 | RNVC: 9
6-226-0-640-003-4: RNCC: 5 | RNVC: 9
6.226.0.640.003.4: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-329-9165
Butt Hinge

123299165
140-110000-910-0: RNCC: 3 | RNVC: 2

13 Oct 1992

5340-12-380-4735
Lock Bolt

123804735
11-01-032-09-01: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-346-6782
Mending Plate

123466782
3629227: RNCC: 3 | RNVC: 2
362.9227: RNCC: 5 | RNVC: 2

25 Aug 1998

5340-12-370-3470
Helical Compression Spring Seat

123703470
6663706: RNCC: 3 | RNVC: 2
0554103: RNCC: 5 | RNVC: 2

27 Oct 2006

5340-12-199-4098
Retaining Strap

121994098
52.9794.002.08: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-358-9201
Angle Bracket

123589201
3832600462: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-028-5827

5340-12-319-5623
Door Holder

123195623
731.43.083: RNCC: 3 | RNVC: 2
V731.43.083: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-302-6522
Dust And Moisture Seal Protective Cap

123026522
344991101: RNCC: 3 | RNVC: 2

21 Jan 1985

5340-12-310-8974
Retaining Clip

123108974
4255060240: RNCC: 3 | RNVC: 2
4255060240: RNCC: 5 | RNVC: 2

7 Jul 1987

5340-12-121-0621
Dust And Moisture Seal Protective Cap

121210621
514048370091: RNCC: 3 | RNVC: 2
4048370091: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-366-1516
Dust And Moisture Seal Protective Cap

123661516
0006910233: RNCC: 3 | RNVC: 2

15 Mar 2005

5340-12-384-5954
Flush Lock

123845954
2147: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-367-4308
Loop Clamp

123674308
3874920040: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-12-366-7979
Padlock

123667979
P252004: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-12-308-3822
Lock-Release Lever

123083822
7124002: RNCC: 3 | RNVC: 2
7124001: RNCC: 5 | RNVC: 2

3 Oct 1986

5340-12-392-7564
Genera Guide Rail

123927564
S252M3751102: RNCC: 3 | RNVC: 2

5 Jul 2013

5340-12-335-2994
Mounting Bracket

123352994
4900349-203310.00: RNCC: 2 | RNVC: 2
4900349-203310.00: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-12-328-7769
Dust And Moisture Seal Protective Plug

123287769
NO PRIMARY REF 12-328-7769: RNCC: 3 | RNVC: 2
E1250S409: RNCC: 5 | RNVC: 2
E1250S409: RNCC: 5 | RNVC: 9

20 Jun 1992

5340-12-321-9565
Loop Clamp

123219565
DIN3016-1-D1-13X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-13X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.13/20-W1: RNCC: 3 | RNVC: 2
RSGU1.13/20: RNCC: 5 | RNVC: 2
RSGU1100-13-20: RNCC: 5 | RNVC: 2
RSGU1100-13-20: RNCC: 5 | RNVC: 2
103167: RNCC: 5 | RNVC: 2
DIN3016-D1-13X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-D13X20-W1: RNCC: 5 | RNVC: 9
VG95931D13X20W1: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-12-701-6611
Angle Bracket

127016611
VG95211-ML-127016611: RNCC: 2 | RNVC: 2
5.12.7210.1180.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-356-7845
Helical Compression Spring Seat

123567845
09440979: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-12-343-0174
Angle Bracket

123430174
6924-008: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-365-0201
Mounting Plate

123650201
GLD99-00-111000.12: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-307-1740
Dust And Moisture Seal Protective Cap

123071740
1300392-200000.001: RNCC: 2 | RNVC: 2
279.992108: RNCC: 3 | RNVC: 2
279.992108: RNCC: 5 | RNVC: 9
279.992108: RNCC: 5 | RNVC: 9

20 May 1986

5340-12-376-5840
Locking Shackle

123765840
1000-93: RNCC: 3 | RNVC: 2

20 Oct 2008

5340-12-327-7923
Caster Frame

123277923
DR AO 005: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-12-343-5516
Retaining Strap

123435516
50011001080: RNCC: 3 | RNVC: 2
F300 0T 022 4031: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-701-8438
Loop Clamp

127018438
VG95211-ML-127018438: RNCC: 2 | RNVC: 2
5149A-26: RNCC: 3 | RNVC: 2
0500812912499: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-186-2049
Nonmetallic Bumper

121862049
9050001-42: RNCC: 3 | RNVC: 2
007-4802: RNCC: 3 | RNVC: 2

6 Dec 1980

5340-12-301-5079
Detent Plunger

123015079
1300062-223500.02: RNCC: 2 | RNVC: 2
7834683: RNCC: 3 | RNVC: 2
1300062-223500.02: RNCC: 5 | RNVC: 2
7834-683: RNCC: 5 | RNVC: 2

20 Oct 1984

5340-12-165-3191
Angle Bracket

121653191
307.601-60000.02: RNCC: 3 | RNVC: 2
0307601-60000-02: RNCC: 5 | RNVC: 9
2307601-60000-02: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-365-5894
Angle Bracket

123655894
J32320138-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-165-7285
Helical Compression Spring Seat

121657285
416S26027: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-375-5525
Double Angle Bracket

123755525
L311M3807208: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-12-300-2802
Angle Bracket

123002802
3094281140: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-392-8905
Mounting Bracket

123928905
2324803000: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-370-1908
Dust And Moisture Seal Protective Plug

123701908
1000946: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-12-192-3416
Retaining Strap

121923416
VG95933BR-18-W1-BK: RNCC: 2 | RNVC: 2
1/1G18MMN325: RNCC: 3 | RNVC: 2
1-1G18MMN325: RNCC: 5 | RNVC: 2

15 Apr 1982

5340-12-172-6142
Leather Strap

121726142
623202: RNCC: 3 | RNVC: 2
4230-03-06-15-01: RNCC: 5 | RNVC: 9

31 Jan 1978

5340-12-383-0196
Mounting Bracket

123830196
0025201: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-12-358-7666
Multiple Angle Bracket

123587666
9412682878: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-314-2042
Mending Plate

123142042
272.317 753: RNCC: 2 | RNVC: 2
272.317.753: RNCC: 3 | RNVC: 2
272.317 753: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-172-4792
Plain Solid Disk

121724792
601546: RNCC: 3 | RNVC: 2
4230-03-06-16-10: RNCC: 5 | RNVC: 2
4230-03-06-16-10: RNCC: 5 | RNVC: 9

23 Jan 1978

5340-12-165-7857
Dust And Moisture Seal Protective Plug

121657857
1161784EF8975-65: RNCC: 3 | RNVC: 2
0116 1784: RNCC: 5 | RNVC: 2
4H32X1-5X38H7565: RNCC: 5 | RNVC: 2
VDPM00001: RNCC: 5 | RNVC: 2
1161784: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-196-0742
Bail Handle

121960742
409.039712: RNCC: 3 | RNVC: 2
409-039712: RNCC: 5 | RNVC: 2
409.039712: RNCC: 5 | RNVC: 9

25 May 1983

5340-12-319-4964
Manual Control Handle

123194964
2300232-183400.000.0: RNCC: 2 | RNVC: 2
2300232-183400.000.0: RNCC: 3 | RNVC: 2
2300232-183400.000.02: RNCC: 5 | RNVC: 9

6 Oct 1989

5340-12-371-4640
Loop Clamp

123714640
6684920340: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-12-349-4637
Mechanical Stop

123494637
0223 0204: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-324-6495
Double Angle Bracket

123246495
100017212: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-328-3059
Angle Bracket

123283059
105-617071.55: RNCC: 3 | RNVC: 2

6 May 1992

5340-12-344-7421
Nonmetallic Bumper

123447421
3800145-100000.07: RNCC: 2 | RNVC: 2
3800145-100000.07: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-12-388-2582
Handle Grip

123882582
GN 819-22-B8: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-12-180-2158
Angle Bracket

121802158
02536954: RNCC: 3 | RNVC: 2
2536954EE5006-75: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-337-6763
Mounting Bracket

123376763
454-250210.002: RNCC: 3 | RNVC: 2
454-250210.002: RNCC: 5 | RNVC: 9
9874163: RNCC: 5 | RNVC: 9

27 Mar 1995

5340-12-343-9410
Mounting Bracket

123439410
52.9618.000.44: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-12-343-7814
Spacing Threaded Standoff

123437814
00-28-10-37-12: RNCC: 3 | RNVC: 2

28 Jul 1997

5340-12-321-6310
Resilient Mount

123216310
230005185-01: RNCC: 3 | RNVC: 9
81.96020.0250: RNCC: 5 | RNVC: 2
81960200250: RNCC: 5 | RNVC: 2

8 Jun 1990

5340-12-377-1543
Bow Handle

123771543
GN668-20-170-A-SW: RNCC: 3 | RNVC: 2

15 Dec 2008

5340-12-332-4194
Elastic Strap

123324194
480/7397-40-00-00/6: RNCC: 3 | RNVC: 2
480-7397-40-00-00-6: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-702-9228
Mounting Plate

127029228
VG95211-ML-127029228: RNCC: 2 | RNVC: 2
5.12.7211.2281.98: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-364-2057
Mounting Bracket

123642057
9455461082: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-197-5159
Doorstop

121975159
236-ALBEL: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-123-3915
Loop Clamp

121233915
81974010106: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-320-9085
Retaining Clip

123209085
0213 8201: RNCC: 3 | RNVC: 2
02138201EC0150-16: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-12-311-5852
Dust And Moisture Seal Protective Cap

123115852
021.450635: RNCC: 2 | RNVC: 2
021.450635: RNCC: 3 | RNVC: 2

22 Sep 1987

5340-12-370-2039
Hand Carrying Strap Assembly

123702039
F6207: RNCC: 3 | RNVC: 2

29 Sep 2006

5340-12-368-2918
Escutcheon Plate

123682918
5754120: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-12-178-9530
Spring Tension Clip

121789530
0117 3215: RNCC: 3 | RNVC: 2
1173215: RNCC: 5 | RNVC: 9
1173215EE8928-80: RNCC: 5 | RNVC: 9

28 May 1979

5340-12-177-3463
Retaining Clip

121773463
81482250024: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-311-8956
Plug Button

123118956
B1 091 11: RNCC: 3 | RNVC: 2
B4797237ZD: RNCC: 5 | RNVC: 2
B1.091.11: RNCC: 5 | RNVC: 2

27 Oct 1987

5340-12-313-7239
Gummi- Riemen

123137239
490113: RNCC: 3 | RNVC: 2
V/350: RNCC: 5 | RNVC: 2

29 Apr 1988

5340-12-144-8875
Turnbuckle Body

121448875
M10LANGLN9185-1-7214-4: RNCC: 2 | RNVC: 2
M10X1-5LANGLN9185-1-7214-4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-5642
Mounting Bracket

123265642
4225619902: RNCC: 3 | RNVC: 2

8 Oct 1991

5340-12-384-0152
Retaining Strap

123840152
30560: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-12-161-8160
Butt Hinge Leaf

121618160
81626900038: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-374-1425
Access Cover

123741425
4649201010: RNCC: 3 | RNVC: 2

23 Jan 2008

5340-12-367-9404
Dust And Moisture Seal Protective Cap-Plug

123679404
81960020171: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-12-360-9352
Mounting Bracket

123609352
160.31.0421: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-177-5504
Dust And Moisture Seal Protective Plug

121775504
4116830110: RNCC: 3 | RNVC: 2

5 Feb 1979

5340-12-317-5822
Mounting Bracket

123175822
42036061: RNCC: 3 | RNVC: 2
42036061KZ5021-68: RNCC: 5 | RNVC: 2

19 Apr 1989

5340-12-322-9967
Manual Control Handle

123229967
61312300387: RNCC: 3 | RNVC: 9

16 Oct 1990

5340-12-027-0020

5340-12-196-5144
Angle Bracket

121965144
81414010000: RNCC: 3 | RNVC: 2
81.41401.0000: RNCC: 5 | RNVC: 2
0159.36.03124: RNCC: 5 | RNVC: 9
159F3124: RNCC: 5 | RNVC: 9

13 Jul 1983

5340-12-374-7879
Clamping Catch

123747879
590.243-A2: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-12-304-4378
Retaining Strap

123044378
10100214450: RNCC: 3 | RNVC: 2
0005450686: RNCC: 5 | RNVC: 2

17 Jul 1985

5340-12-341-3439
Mounting Bracket

123413439
418341: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-12-375-9642
Spring Tension Clip

123759642
73764: RNCC: 3 | RNVC: 2

25 Jul 2008

5340-12-359-4914
Nonmetallic Bumper

123594914
7825.10.05: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-313-6045
Cane Bolt

123136045
2300013-5653.12: RNCC: 2 | RNVC: 2
2300013-5653.12: RNCC: 3 | RNVC: 2
2300013-5653.12: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-12-378-5730
Extension Drawer Slide

123785730
05.043.856.7: RNCC: 3 | RNVC: 2
5.043.856.7: RNCC: 5 | RNVC: 9
BF-480-FLR-16: RNCC: 5 | RNVC: 9

22 Apr 2009

5340-12-371-3940
Helical Compression Spring Seat

123713940
J94320262-002: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-12-393-0095
Mounting Plate

123930095
864064010: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-346-1418
Butt Hinge

123461418
9892215: RNCC: 3 | RNVC: 2
463-630400.004: RNCC: 5 | RNVC: 9
9892215: RNCC: 5 | RNVC: 9

18 Jun 1998

5340-12-339-5227
Webbing Strap

123395227
00303120: RNCC: 3 | RNVC: 2
00202120: RNCC: 5 | RNVC: 9

30 Nov 1995

5340-12-409-8191

5340-12-408-7183

5340-12-172-1345
Flush Lock

121721345
3296: RNCC: 3 | RNVC: 2

22 Dec 1977

5340-12-357-8808
Angle Bracket

123578808
2300042-255360.002: RNCC: 2 | RNVC: 2
2300042-255360.002: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-12-337-4083
Double Angle Bracket

123374083
4282405R01: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-12-191-7322
Nut And Bolt Locking Plate

121917322
753609: RNCC: 3 | RNVC: 2

1 Mar 1982

5340-12-378-4263
Mounting Bracket

123784263
41028335: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-385-5128
Angle Bracket

123855128
5350180440: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-021-9939

5340-12-382-3511
Loop Clamp

123823511
053911222: RNCC: 3 | RNVC: 2

9 Jun 2010

5340-12-179-6003
Resilient Mount

121796003
3358900001: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-197-3793
Resilient Mount

121973793
3.602.9.085.032.7: RNCC: 3 | RNVC: 2
3-602-9-085-032-7: RNCC: 5 | RNVC: 9
3.602.9.085.032.7: RNCC: 5 | RNVC: 9

18 Oct 1983

5340-12-174-7868
Angle Bracket

121747868
02516882: RNCC: 3 | RNVC: 2
2516882EE5062-26: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-702-5869
Manual Control Handle

127025869
VG95211-ML-127025869: RNCC: 2 | RNVC: 2
5.51.9205.0197.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-390-5379
Webbing Strap

123905379
SK950-990402.000.0: RNCC: 3 | RNVC: 2
7112646: RNCC: 5 | RNVC: 2

21 Nov 2012

5340-12-347-6610
Dust And Moisture Seal Protective Cap

123476610
HP-016-5-74-KU: RNCC: 3 | RNVC: 2
HP-016-5-74: RNCC: 5 | RNVC: 2

25 Jan 1999

5340-12-328-2894
Mounting Bracket

123282894
1.350.123.9: RNCC: 3 | RNVC: 2
1-350-123-9: RNCC: 5 | RNVC: 2

5 May 1992

5340-12-125-1002
Expansion Plug

121251002
4005 310 015: RNCC: 3 | RNVC: 2
0552136: RNCC: 5 | RNVC: 2
1094-500: RNCC: 5 | RNVC: 2
1094500: RNCC: 5 | RNVC: 2
4005310015: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-3693
Clamping Catch

123343693
07-10-201-12: RNCC: 3 | RNVC: 2
12-126: RNCC: 5 | RNVC: 2
90-28745-9: RNCC: 5 | RNVC: 2

2 May 1994

5340-12-185-2234
Nut And Bolt Locking Plate

121852234
061543: RNCC: 3 | RNVC: 2
061543-200-40-10-00: RNCC: 5 | RNVC: 2
061543-200-40-10-00: RNCC: 5 | RNVC: 9
061543: RNCC: 5 | RNVC: 9

20 Sep 1980

5340-12-348-8729
Mending Plate

123488729
245/7383-01-00-01: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-190-2457
Angle Bracket

121902457
V22.629.213-21: RNCC: 3 | RNVC: 2
272.309386: RNCC: 5 | RNVC: 2
V22-629-213-21: RNCC: 5 | RNVC: 9
2500001-351270-021: RNCC: 5 | RNVC: 9

16 Nov 1981

5340-12-344-3746
Angle Bracket

123443746
A-296771-047: RNCC: 3 | RNVC: 2
A296771-047: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-372-8529
Plain Solid Disk

123728529
R004413.101: RNCC: 3 | RNVC: 2

28 Aug 2007

5340-12-357-7056
Access Cover

123577056
421930: RNCC: 3 | RNVC: 2
0006110901: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-309-8305
Mending Plate

123098305
281805795: RNCC: 3 | RNVC: 2
81.62430.4029: RNCC: 5 | RNVC: 2

6 Mar 1987

5340-12-365-7651
Access Cover

123657651
5410100535: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-340-0011
Protection Bellows

123400011
200.998: RNCC: 3 | RNVC: 2
463-611201.000: RNCC: 3 | RNVC: 9
667916:317.28(2): RNCC: 5 | RNVC: 2

13 Feb 1996

5340-12-322-2693
Rod End Clevis

123222693
1904379: RNCC: 3 | RNVC: 2
1904379: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-367-9687
Access Cover

123679687
18899: RNCC: 3 | RNVC: 2

13 Nov 2005

5340-12-094-5201

5340-12-408-7182

5340-12-348-2506
Retaining Strap

123482506
T621M1113211: RNCC: 3 | RNVC: 2

17 May 1999

5340-12-316-3435
Nonmetallic Bumper

123163435
T50727: RNCC: 3 | RNVC: 2
T50727: RNCC: 5 | RNVC: 9

11 Jan 1989

5340-12-173-0342
Dust And Moisture Seal Protective Cap-Plug

121730342
025-0502-000: RNCC: 3 | RNVC: 2

15 Mar 1978

5340-12-198-8858
Retaining Strap

121988858
VG95933CR-15-W1-BK: RNCC: 2 | RNVC: 2
2/1D15MMN325: RNCC: 3 | RNVC: 2
MMN325-2-1D15: RNCC: 5 | RNVC: 2
MMN325-2-1D9-15: RNCC: 5 | RNVC: 2
2-1D15MMN325: RNCC: 5 | RNVC: 2
700325 015104: RNCC: 5 | RNVC: 2
700325015104: RNCC: 5 | RNVC: 2
MMN325-2-1D9-15: RNCC: 5 | RNVC: 2
MMN325-2-1D15: RNCC: 5 | RNVC: 2

9 Mar 1984

5340-12-386-0174
Access Cover

123860174
2500262-193700.003.0: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-12-330-4684
Resilient Mount

123304684
500037-M8X23-M12X60.NR55.ST: RNCC: 3 | RNVC: 2
140491: RNCC: 5 | RNVC: 2
31853-140491: RNCC: 5 | RNVC: 2
128-090.0084.4: RNCC: 5 | RNVC: 2
VG95363A40X30-M8X23-M12X60NR55ST: RNCC: 5 | RNVC: 9

18 Dec 1992

5340-12-701-4317
Mounting Plate

127014317
VG95211-ML-127014317: RNCC: 2 | RNVC: 2
5.12.5313.0330.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6476
Angle Bracket

127016476
VG95211-ML-127016476: RNCC: 2 | RNVC: 2
5.12.7204.4111.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-4727
Mounting Bracket

123384727
2500229-199100.000.0: RNCC: 2 | RNVC: 2
2500229-199100.000.0: RNCC: 3 | RNVC: 2

17 Jul 1995

5340-12-196-9859
Angle Bracket

121969859
A-230129-195: RNCC: 3 | RNVC: 2
A230129-195: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-317-4907
Manual Control Lever

123174907
1000192-02 0 31710: RNCC: 2 | RNVC: 2
1000192-02 0 31710: RNCC: 3 | RNVC: 2
1000192-02 0 31710: RNCC: 5 | RNVC: 9

13 Apr 1989

5340-12-196-9455
Angle Bracket

121969455
4900059-121222.000.0: RNCC: 3 | RNVC: 2
4900059-121222-000-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-360-0972
Spring Tension Clip

123600972
9419880478: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-312-6688
Friction Catch

123126688
1370-T96K: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-12-131-5636

5340-12-320-4154
Angle Bracket

123204154
0242 2321: RNCC: 3 | RNVC: 2
02422321KZ0148-44: RNCC: 5 | RNVC: 2

12 Jan 1990

5340-12-316-2992
Plug Button

123162992
5185289: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-374-3477
Loop Clamp

123743477
4059950001: RNCC: 3 | RNVC: 2
7085320: RNCC: 5 | RNVC: 2

11 Feb 2008

5340-12-323-7474
Electrical-Mechanical Equipment Post

123237474
66.3579.100.01-A001: RNCC: 3 | RNVC: 2

13 Dec 1990

5340-12-380-4288
Mounting Bracket

123804288
105-45041W26: RNCC: 3 | RNVC: 2

29 Oct 2009

5340-12-132-7919

5340-12-190-3782
Loop Clamp

121903782
PAN4231CCEF6424: RNCC: 3 | RNVC: 2

24 Nov 1981

5340-12-316-9755
Access Cover

123169755
1822330004: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-313-2587
Catch Strike

123132587
42045235KZ5059-80: RNCC: 3 | RNVC: 2

16 Mar 1988

5340-12-194-4006
Nonmetallic Bumper

121944006
043.5262: RNCC: 3 | RNVC: 2
0435262: RNCC: 5 | RNVC: 2
KBJ90141: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-197-2316
Electrical-Mechanical Equipment Post

121972316
2020550130: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-311-9774
Helical Compression Spring Seat

123119774
51917010285: RNCC: 3 | RNVC: 2
51.91701.0285: RNCC: 5 | RNVC: 2
51917010285: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-12-351-4918
Sliding Door Track

123514918
10063-312400: RNCC: 3 | RNVC: 2
10063-312400: RNCC: 5 | RNVC: 9

31 Jul 2000

5340-12-320-6909
Mounting Bracket

123206909
9000 6101: RNCC: 3 | RNVC: 2

7 Feb 1990

5340-12-363-6904
Access Cover

123636904
T531M3420101: RNCC: 2 | RNVC: 2
T531M3420101: RNCC: 3 | RNVC: 2

15 Jul 2004

5340-12-354-3093
Mounting Bracket

123543093
5909950269: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-12-130-1128

5340-12-357-8928
Caster Wheel

123578928
W150104: RNCC: 3 | RNVC: 2
150104: RNCC: 5 | RNVC: 2

8 Aug 2002

5340-12-389-9254
Door Handle

123899254
207149: RNCC: 3 | RNVC: 2
207149: RNCC: 5 | RNVC: 2

13 Sep 2012

5340-12-130-8717

5340-12-347-3136
Friction Catch

123473136
94789: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-12-329-7486
Runner

123297486
2300248-80420.06: RNCC: 2 | RNVC: 2
2300248-80420.06: RNCC: 3 | RNVC: 2
2300248-80420.06: RNCC: 5 | RNVC: 2

23 Sep 1992

5340-12-351-4169
Track Stop

123514169
10063-231000.04: RNCC: 3 | RNVC: 2
10063-231000.04: RNCC: 5 | RNVC: 9

25 Jul 2000

5340-12-305-6127
Elastic Cord Assembly

123056127
4218605081: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-300-0381
Angle Bracket

123000381
5802017-603000.10: RNCC: 2 | RNVC: 2
5802017-603000.10: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-12-343-8916
Mechanical Stop

123438916
1421034002: RNCC: 3 | RNVC: 2
0130 9259: RNCC: 5 | RNVC: 2

11 Aug 1997

5340-12-307-1764
Dust And Moisture Seal Protective Cap

123071764
K251: RNCC: 3 | RNVC: 2
N3627: RNCC: 5 | RNVC: 2

20 May 1986

5340-12-198-3278
Lock-Release Lever

121983278
27 0319 051: RNCC: 2 | RNVC: 2
9849768: RNCC: 3 | RNVC: 9
27 0319 051: RNCC: 5 | RNVC: 2
270319051: RNCC: 5 | RNVC: 9
27 0319 051: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-182-7184
Platte

121827184
81907500320: RNCC: 3 | RNVC: 2

22 Feb 1980

5340-12-312-3822
Expansion Plug

123123822
DIN443-B45-2.0335.10: RNCC: 2 | RNVC: 2
DIN443-B45-2-0335-10: RNCC: 5 | RNVC: 2
DIN443-B45-CUZN36F30: RNCC: 5 | RNVC: 2

22 Dec 1987

5340-12-352-2251
Mounting Bracket

123522251
5061420012: RNCC: 3 | RNVC: 2
506 142 00 12: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-308-0632
Dust And Moisture Seal Protective Plug

123080632
113101112: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-12-386-7430
Rim Lock Set

123867430
62.050.000: RNCC: 3 | RNVC: 2
49.072.000: RNCC: 5 | RNVC: 9

28 Sep 2011

5340-12-322-3349
Butt Hinge

123223349
4617600017: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-011-4550

5340-12-307-9283
Plug Button

123079283
2996.60.45: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-163-9040
Butt Hinge Leaf

121639040
A25X3X656HAN16515-3-3214-7: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-359-4362
Loop Clamp

123594362
DIN3016-1-E1-10X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-701-4941
Mounting Bracket

127014941
VG95211-ML-127014941: RNCC: 2 | RNVC: 2
5.12.5850.1670.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5530
Mounting Bracket

127025530
VG95211-ML-127025530: RNCC: 2 | RNVC: 2
5.51.7220.0240.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-192-5447
Metal Runner

121925447
5801215-0.085: RNCC: 3 | RNVC: 2

3 May 1982

5340-12-318-1337
Hinged Hasp

123181337
704-121310-000-0: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-171-2486
Mending Plate

121712486
306-096-80-094: RNCC: 3 | RNVC: 2
81.67196-0002: RNCC: 5 | RNVC: 2
039005: RNCC: 5 | RNVC: 2
81671960002: RNCC: 5 | RNVC: 2
23251-200642-007-0: RNCC: 5 | RNVC: 9
23251-200642.007.0: RNCC: 5 | RNVC: 9

21 Sep 1977

5340-12-381-9089
Mechanical Stop

123819089
000605-204000.05: RNCC: 2 | RNVC: 2
39214: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-12-382-1962
Mounting Bracket

123821962
12.35: RNCC: 3 | RNVC: 2

20 May 2010

5340-12-310-6959
Plug Button

123106959
024243: RNCC: 3 | RNVC: 2

22 Jun 1987

5340-12-133-2821
Bild Aufhaenger

5340-12-385-5908
Access Cover

123855908
5562030386: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-12-372-1629
Dust And Moisture Seal Protective Plug

123721629
S288M3008205: RNCC: 2 | RNVC: 2
S288M3008205: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-12-304-7824
Double Angle Bracket

123047824
P209279684106062: RNCC: 3 | RNVC: 2

26 Aug 1985

5340-12-167-7165
Angle Bracket

121677165
3574815: RNCC: 3 | RNVC: 2
3574815: RNCC: 5 | RNVC: 2

17 Jan 1977

5340-12-359-0495
Pawl Fastener

123590495
00001026101: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-315-6993
Dust And Moisture Seal Protective Cap

123156993
849 561: RNCC: 3 | RNVC: 2
553085077: RNCC: 5 | RNVC: 2
90156684: RNCC: 5 | RNVC: 2

22 Nov 1988

5340-12-317-5421
Access Cover

123175421
1000192-02 0 31000.17: RNCC: 2 | RNVC: 2
1000192-02 0 31000.17: RNCC: 3 | RNVC: 2
1000192-02 0 31000.17: RNCC: 5 | RNVC: 9

18 Apr 1989

5340-12-198-8550
Catch Strike

121988550
VG95136B2-35X20-TEIL 1: RNCC: 2 | RNVC: 2
602K0210-001-00.4: RNCC: 3 | RNVC: 2
VG95136B2-35X20-TEIL 1: RNCC: 3 | RNVC: 2
602K0210-1: RNCC: 5 | RNVC: 2
VG95136B2-35X20-TEIL 1: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-385-5516
Mounting Bracket

123855516
F6788566: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-307-5538
Detent Plunger

123075538
1270.1,8.0.413: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-12-358-7370
Dust And Moisture Seal Protective Cover

123587370
2719-300420.006.0: RNCC: 2 | RNVC: 2
2719-300420.006.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-331-2502
Mounting Plate

123312502
27.2.341.0009: RNCC: 3 | RNVC: 2

7 Apr 1993

5340-12-381-6795
Dust And Moisture Seal Protective Plug

123816795
504219737: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-155-2534
Butt Hinge Leaf

121552534
160-22542-64: RNCC: 3 | RNVC: 2
160-22542-64: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-1301
Mounting Bracket

123601301
9424313640: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-391-4274
Access Cover

123914274
I006473: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-317-6086
Access Cover

123176086
1000192-02 0 32010: RNCC: 2 | RNVC: 2
1000192-02 0 32010: RNCC: 3 | RNVC: 2
1000192-02 0 32010: RNCC: 5 | RNVC: 9

21 Apr 1989

5340-12-378-2809
Loop Clamp

123782809
DIN3016-1-D1-17X15-W1-2-NBR: RNCC: 2 | RNVC: 2

25 Mar 2009

5340-12-042-5823

5340-12-309-8254
Door Handle

123098254
580A042: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-352-2901
Dust And Moisture Seal Boot

123522901
00111101: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-12-092-3438

5340-12-183-0434
Dust And Moisture Seal Protective Plug

121830434
NO PRIMARY REF 12-183-0434: RNCC: 3 | RNVC: 2
2127-01-00.00: RNCC: 5 | RNVC: 9
32-543-35-4: RNCC: 5 | RNVC: 9
ERSETZT DURCH 5340-12-329-0558: RNCC: 5 | RNVC: 9
VERSCHL. ST. MIT LASCHE M12X1,5: RNCC: 5 | RNVC: 9
VERSCHL. ST. MIT LASCHE M12X1,5: RNCC: 5 | RNVC: 9

13 Mar 1980

5340-12-181-0817
Webbing Strap

121810817
5803463-4.152: RNCC: 2 | RNVC: 2
5803463-4.152: RNCC: 3 | RNVC: 2
5803463-4.152: RNCC: 3 | RNVC: 2
5801536-1152: RNCC: 5 | RNVC: 9
5801536-1152: RNCC: 5 | RNVC: 9
5801536-1152: RNCC: 5 | RNVC: 9
5803463-4.152: RNCC: 5 | RNVC: 9
000-A2-20X2,0X600-PE-RAL6031: RNCC: 6 | RNVC: 9

24 Oct 1979

5340-12-306-0697
Mending Plate

123060697
5801984-203000.005.0: RNCC: 2 | RNVC: 2
5801984-203000.005.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-186-6454
Butt Hinge Leaf

121866454
1444336: RNCC: 3 | RNVC: 2
75E5.22.1-2: RNCC: 5 | RNVC: 2
75E5-22-1-2: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-333-6696
Rigid Caster

123336696
BK-SPO 100 P: RNCC: 3 | RNVC: 2
BK-SPO100P: RNCC: 5 | RNVC: 2

20 Jan 1994

5340-12-184-5046
Plain Solid Disk

121845046
460-0-25-0-13: RNCC: 3 | RNVC: 2

29 Jul 1980

5340-12-316-3575
Butt Hinge

123163575
2300035-250100.11: RNCC: 2 | RNVC: 2
2300035-250100.11: RNCC: 5 | RNVC: 9
2300035-250100.11: RNCC: 5 | RNVC: 9

12 Jan 1989

5340-12-372-4369
Sliding Door Track

123724369
5400053-972500.05: RNCC: 2 | RNVC: 2
5400053-972500.05: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-12-337-9334
Spacing Threaded Standoff

123379334
4618430016: RNCC: 3 | RNVC: 2

4 May 1995

5340-12-167-9841
Retaining Clip

121679841
211711343: RNCC: 3 | RNVC: 9

7 Feb 1977

5340-12-361-6505
Spring Tension Clip

123616505
4D0 611 715 B: RNCC: 3 | RNVC: 2

29 Oct 2003

5340-12-369-6433
Mending Plate

123696433
03.281.25.04.0: RNCC: 3 | RNVC: 2
03.281.25.04.0: RNCC: 5 | RNVC: 2

4 Aug 2006

5340-12-189-1844
Mounting Plate

121891844
8331596440: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-355-1599
Hand Crank

123551599
239 620 03: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-358-9229
Multiple Angle Bracket

123589229
3814311440: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-147-2022
Retaining Strap

121472022
BSN20X20X2: RNCC: 3 | RNVC: 2
15200000020: RNCC: 5 | RNVC: 2
502936: RNCC: 5 | RNVC: 2
5200000020: RNCC: 5 | RNVC: 2
5200000020: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-128-0258

5340-12-199-8011
Double Angle Bracket

121998011
5801658-6201.00: RNCC: 2 | RNVC: 2
5801658-6201.00: RNCC: 3 | RNVC: 2

31 May 1984

5340-12-094-6107

5340-12-373-6329
Spring Tension Clip

123736329
X00015421: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-318-7325
Butt Hinge Leaf

123187325
704-122580-901-0: RNCC: 3 | RNVC: 2

11 Aug 1989

5340-12-701-1383
Mounting Bracket

127011383
VG95211-ML-127011383: RNCC: 2 | RNVC: 2
5.12.0100.6351.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-3336
Nut And Bolt Locking Plate

121963336
P-855948-403: RNCC: 3 | RNVC: 2
P855948-403: RNCC: 5 | RNVC: 2

28 Jun 1983

5340-12-350-3745
Door Holder

123503745
105-201791: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-12-385-5172
Access Cover

123855172
5580903543: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-12-307-1576
Mending Plate

123071576
4216710040: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-377-1103
Retaining Strap

123771103
41216793: RNCC: 3 | RNVC: 2

11 Dec 2008

5340-12-346-7504
Dust And Moisture Seal Protective Cover

123467504
2300211-991014.000.0: RNCC: 2 | RNVC: 2
2300211-991014.000.0: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-355-4842
Mounting Bracket

123554842
5362.007.3: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-134-8190

5340-12-135-6710

5340-12-359-1947
Dust And Moisture Seal Protective Cap

123591947
9416891439: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-193-0503
Retaining Strap

121930503
5802302840: RNCC: 3 | RNVC: 2

16 Jun 1982

5340-12-342-6850
Hinge Torsion Bar

123426850
81626912000: RNCC: 3 | RNVC: 2
81.62691.2000: RNCC: 5 | RNVC: 2
14F16164: RNCC: 5 | RNVC: 2
0014.36.16164: RNCC: 5 | RNVC: 2
00143616164: RNCC: 5 | RNVC: 2

14 Mar 1997

5340-12-358-2577
Helical Compression Spring Seat

123582577
41367: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-388-3485
Mechanical Stop

123883485
865344342: RNCC: 2 | RNVC: 2
865344342: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-12-350-2215
Nonmetallic Bumper

123502215
10063-110300.02: RNCC: 3 | RNVC: 2
10063-110300.02: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-364-3877
Mechanical Stop

123643877
T661P1002223: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-310-8858
Turnbuckle Body

123108858
1700037.01.28: RNCC: 2 | RNVC: 2
87.12.00000.0033: RNCC: 3 | RNVC: 2
1700037.01.28: RNCC: 5 | RNVC: 2
5-316-0043: RNCC: 5 | RNVC: 2
1700037.01.28: RNCC: 5 | RNVC: 9

6 Jul 1987

5340-12-353-5137
Verriegelun Buegel

123535137
2300298-183223.000.0: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-12-394-4103
Magnetic Catch

123944103
GN 54.1-SC-25: RNCC: 3 | RNVC: 2

28 Nov 2013

5340-12-182-3577
Metal Runner

121823577
C104-A24-C8: RNCC: 2 | RNVC: 2
C104-A24-C8: RNCC: 3 | RNVC: 2
C104-A24-C8: RNCC: 5 | RNVC: 2
C104A24C8: RNCC: 5 | RNVC: 2
C104A24C8: RNCC: 5 | RNVC: 2

28 Jan 1980

5340-12-192-8957
Catch Strike

121928957
4617430003: RNCC: 3 | RNVC: 2
8724-34: RNCC: 5 | RNVC: 2
ZR17430003: RNCC: 5 | RNVC: 2
8724-34: RNCC: 5 | RNVC: 9
721 1 66 746 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-700-8593
Threaded End Tensioning Tie Rod

127008593
VG95211-ML-127008593: RNCC: 2 | RNVC: 2
155N1220-25-1,5-716: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-9173
Access Cover

123309173
2718-000500.000.0: RNCC: 2 | RNVC: 2
2718-000500.000.0: RNCC: 3 | RNVC: 2

25 Feb 1993

5340-12-701-1985
Lock-Release Lever

127011985
VG95211-ML-127011985: RNCC: 2 | RNVC: 2
5.12.0603.0040.92: RNCC: 3 | RNVC: 2
0501420091099: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-308-2921
Mending Plate

123082921
P-875510-011: RNCC: 3 | RNVC: 2
P875510-011: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-196-9862
Angle Bracket

121969862
A-230129-197: RNCC: 3 | RNVC: 2
A230129-197: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-702-6024
Loop Clamp

127026024
VG95211-ML-127026024: RNCC: 2 | RNVC: 2
5159A-6-1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6958
Angle Bracket

127016958
VG95211-ML-127016958: RNCC: 2 | RNVC: 2
5.12.7222.8001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-5499
Dust And Moisture Seal Protective Plug

121825499
HK080CK11-211: RNCC: 3 | RNVC: 2
0287 7171: RNCC: 5 | RNVC: 2
2877171: RNCC: 5 | RNVC: 2
2877171EZ8928-63: RNCC: 5 | RNVC: 2
49.4901-0081.0: RNCC: 5 | RNVC: 2

11 Feb 1980

5340-12-311-2495
Angle Bracket

123112495
P-967410-001: RNCC: 3 | RNVC: 2
P967410-001: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-12-126-5261
Loop Clamp

121265261
DIN71555-48,5-PH: RNCC: 2 | RNVC: 2
DIN71555-48,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
48,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-48-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
48-5DIN71555PHRE: RNCC: 5 | RNVC: 2
DIN71555-48,5-PHOSPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-48-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
5500200048: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-168-2763
Loop Clamp

121682763
DIN3016-2-G1-96X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-96X15-W1-2: RNCC: 3 | RNVC: 2
SP96/15SKZ: RNCC: 3 | RNVC: 2
1410000096: RNCC: 5 | RNVC: 2
SP96-15SK: RNCC: 5 | RNVC: 2
DIN3016-G1-96X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G96X15-W1: RNCC: 5 | RNVC: 9
VG95931G96X15W1: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-306-4011
Angle Bracket

123064011
V22.917.3-19: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-177-3532
Ball Socket Seat

121773532
0009912422: RNCC: 3 | RNVC: 2
11700077: RNCC: 5 | RNVC: 2
0009912422: RNCC: 5 | RNVC: 2
0009912422: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-339-7321
Angle Bracket

123397321
2300042-240000.003: RNCC: 2 | RNVC: 2
2300042-240000.003: RNCC: 3 | RNVC: 2
2300042-240000.003: RNCC: 5 | RNVC: 9
9832839: RNCC: 5 | RNVC: 9

5 Jan 1996

5340-12-380-5330
Angle Bracket

123805330
8800783641: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-376-9586
Halter

123769586
0001510940: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-12-376-5459
Friction Catch Stud Receptacle

123765459
623.000.0170: RNCC: 3 | RNVC: 2
0224085: RNCC: 5 | RNVC: 2

15 Oct 2008

5340-12-193-0305
Resilient Mount

121930305
5802300880: RNCC: 3 | RNVC: 2
5802300080: RNCC: 5 | RNVC: 9

15 Jun 1982

5340-12-378-3073
Angle Bracket

123783073
598102-830110.001.0: RNCC: 2 | RNVC: 2
598102-830110.001.0: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-307-9962
Lock-Release Lever

123079962
0061.1916.1: RNCC: 3 | RNVC: 2

18 Aug 1986

5340-12-374-6245
Retaining Strap

123746245
L630M1001213: RNCC: 3 | RNVC: 2

3 Mar 2008

5340-12-198-1914
Helical Compression Spring Retainer

121981914
1420328013: RNCC: 3 | RNVC: 2
1420328013: RNCC: 5 | RNVC: 2
VDPM00705: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-198-0814
Elbow Catch

121980814
2335001: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-12-309-7918
Access Cover

123097918
6131613: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-362-5339
Dust And Moisture Seal Protective Plug

123625339
JDDA4238: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-308-5962
Resilient Mount

123085962
E1E 42S 38 EC: RNCC: 3 | RNVC: 2
E1E 42S 38EC: RNCC: 5 | RNVC: 2

28 Oct 1986

5340-12-135-6518

5340-12-321-5796
Mending Plate

123215796
160.19.0003: RNCC: 2 | RNVC: 2
160.19.0003: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-316-8281
Access Cover

123168281
2300279-9834.00: RNCC: 2 | RNVC: 2
2300279-9834.00: RNCC: 3 | RNVC: 2
2300279-9834.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-350-6152
Retaining Strap

123506152
28200784341: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-12-361-1991
Access Door Hinge

123611991
7861011420: RNCC: 2 | RNVC: 2
7861011420: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-320-9115
Angle Bracket

123209115
1304 334 025: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-12-355-1539
Angle Bracket

123551539
1603295-3100: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-189-4057
Loop Clamp

121894057
LN9491BK32: RNCC: 2 | RNVC: 2

24 Sep 1981

5340-12-377-3708
Multiple Angle Bracket

123773708
41297362: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-321-6487
Coat And Hat Hook

123216487
1138001: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-375-4055
Cushioning Pad

123754055
1404004-000.01: RNCC: 2 | RNVC: 2
1404004-000.01: RNCC: 3 | RNVC: 2

29 May 2008

5340-12-198-5766
Webbing Strap

121985766
C42123-A16-A7: RNCC: 2 | RNVC: 2
C42123-A16-A7: RNCC: 3 | RNVC: 2
000-A2-25X2,0X800-PE-RAL6031: RNCC: 6 | RNVC: 9

9 Feb 1984

5340-12-358-7812
Section Block Clamp

123587812
J29120082-001: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-302-4629
Nonmetallic Bumper

123024629
8100128-210000.04: RNCC: 2 | RNVC: 2
7835982: RNCC: 3 | RNVC: 2
7835-982: RNCC: 5 | RNVC: 2
8100128-210000.04: RNCC: 5 | RNVC: 2
8100128-210000.04: RNCC: 5 | RNVC: 9

2 Jan 1985

5340-12-313-0369
Mending Plate

123130369
P-086151-003: RNCC: 3 | RNVC: 2
P086151-003: RNCC: 5 | RNVC: 2

1 Mar 1988

5340-12-163-0051
Retaining Strap

121630051
BD89MMN346: RNCC: 3 | RNVC: 2
BD89MMN346ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-193-4532
Access Cover

121934532
2420050010: RNCC: 3 | RNVC: 2
8690741520: RNCC: 5 | RNVC: 2

22 Jul 1982

5340-12-027-3305

5340-12-028-0601

5340-12-372-0472
Bow Handle

123720472
247383: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-306-0743
Access Cover

123060743
5801984-982510.001.0: RNCC: 2 | RNVC: 2
5801984-982510.001.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-337-3905
Dust And Moisture Seal Protective Plug

123373905
300/V18: RNCC: 3 | RNVC: 2
V18: RNCC: 5 | RNVC: 2
GPN300-V18: RNCC: 5 | RNVC: 2
GPN300/V18: RNCC: 5 | RNVC: 2
50199200: RNCC: 5 | RNVC: 2
50199200.984: RNCC: 5 | RNVC: 2

22 Feb 1995

5340-12-199-5063
Resilient Mount

121995063
5802370011: RNCC: 3 | RNVC: 2

4 May 1984

5340-12-313-8668
Mounting Plate

123138668
4355451240: RNCC: 3 | RNVC: 2
435 545 12 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-197-0424
Bridge Clamp

121970424
4359317032: RNCC: 3 | RNVC: 2
4359317032: RNCC: 3 | RNVC: 9

13 Sep 1983

5340-12-393-5080
Angle Bracket

123935080
4374290840: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-027-5333

5340-12-364-5988
Webbing Strap

123645988
209844: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-12-334-9041
Mending Plate

123349041
52.0099.790.05: RNCC: 2 | RNVC: 2
52.0099.790.05: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-12-146-6600
Retaining Strap

121466600
A5WN7855: RNCC: 3 | RNVC: 2
A5WN7855: RNCC: 3 | RNVC: 2
A5WN7855: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-357-8929
Caster Wheel

123578929
W155085: RNCC: 3 | RNVC: 2
155085: RNCC: 5 | RNVC: 2

8 Aug 2002

5340-12-314-0427
Mounting Bracket

123140427
6204201286: RNCC: 3 | RNVC: 2
620 420 12 86: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-362-6902
Nonmetallic Bumper

123626902
S533M60X1001: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-321-6525
Mounting Bracket

123216525
294528: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-377-8035
Strap Fastener Loop

123778035
290 02548: RNCC: 3 | RNVC: 2

12 Feb 2009

5340-12-320-1454
Shimmy Damper

123201454
094536: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-12-320-2216
Protection Bellows

123202216
908.028: RNCC: 3 | RNVC: 2
161.00.74.0044: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-363-2905
Bow Handle

123632905
599.076.007.017: RNCC: 3 | RNVC: 2
81970010569: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-319-6092
Mounting Bracket

123196092
503394: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-12-392-7995
Dust And Moisture Seal Protective Cover

123927995
443906102G: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-12-350-4802
Compression Cup

123504802
SP491REP76: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-319-0857
Loop Clamp

123190857
E909,POS17: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-12-366-0725
Arched Cushion

123660725
CBD45333P02: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-170-3777
Angle Bracket

121703777
81974860190: RNCC: 3 | RNVC: 2

8 Jul 1977

5340-12-701-2786
Rod End Connector

127012786
VG95211-ML-127012786: RNCC: 2 | RNVC: 2
5.12.5101.0270.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-6249
Hand Crank

123396249
VG85087-A-150X12-AM: RNCC: 2 | RNVC: 2
9-45147-01-05: RNCC: 5 | RNVC: 2
A150-12VG85087RGSX: RNCC: 5 | RNVC: 2
A150X12VG85087-RG5: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-12-393-3031
Spacing Threaded Standoff

123933031
8376208-021: RNCC: 3 | RNVC: 2
R-8376208-021: RNCC: 5 | RNVC: 2

5 Sep 2013

5340-12-702-6271
Retaining Strap

127026271
VG95211-ML-127026271: RNCC: 2 | RNVC: 2
76.7600.630: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-0610
Angle Bracket

127020610
VG95211-ML-127020610: RNCC: 2 | RNVC: 2
3-138-20 OST1 10223-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-300-6511
Nonmetallic Bumper

123006511
DIN95364-C40X27-NR60ST: RNCC: 2 | RNVC: 2
57810860009: RNCC: 5 | RNVC: 2
1.40.27.5.60NR/ST: RNCC: 5 | RNVC: 2
81150-40X27-M8.NR60.ST: RNCC: 5 | RNVC: 2
781086MITTEL: RNCC: 5 | RNVC: 2
VG95364-C40X27-NR60ST: RNCC: 5 | RNVC: 9

21 Aug 1984

5340-12-195-1989
Retaining Strap

121951989
23111-2405.50: RNCC: 3 | RNVC: 2
1109694: RNCC: 5 | RNVC: 9
23111-2405-50: RNCC: 5 | RNVC: 9
23111-2405.50: RNCC: 5 | RNVC: 9
23111-2405-50: RNCC: 5 | RNVC: 9
23111-2405.50: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-12-314-9024
Catch Strike

123149024
160-26287-07: RNCC: 3 | RNVC: 2
160-26287-07: RNCC: 5 | RNVC: 9

25 Aug 1988

5340-12-177-3177
Buckle

121773177
4238-180-01: RNCC: 3 | RNVC: 2
03071F30: RNCC: 5 | RNVC: 9

29 Jan 1979

5340-12-370-9333
Bridge Clamp

123709333
7010708-100000.02: RNCC: 2 | RNVC: 2
7010708-100000.02: RNCC: 3 | RNVC: 2

17 Jan 2007

5340-12-319-4151
Loop Clamp

123194151
211-15110: RNCC: 3 | RNVC: 2
11C: RNCC: 5 | RNVC: 2
202008901: RNCC: 5 | RNVC: 2
211-15110TYP11C: RNCC: 5 | RNVC: 9

29 Sep 1989

5340-12-123-4077
Vent Plug

121234077
81371500001: RNCC: 3 | RNVC: 2
00.18360-1463: RNCC: 5 | RNVC: 2
00183601463: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-9629
Mounting Bracket

123269629
4110610324: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-12-162-9598
Retaining Strap

121629598
5900700640: RNCC: 3 | RNVC: 2
5900700640: RNCC: 5 | RNVC: 2
5900700640: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-316-8288
Angle Bracket

123168288
2300279-5050.02: RNCC: 2 | RNVC: 2
2300279-5050.02: RNCC: 3 | RNVC: 2
2300279-5050.02: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-194-0316
Resilient Mount

121940316
3521550650: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-385-2894
Access Cover

123852894
5500981943: RNCC: 3 | RNVC: 2

18 May 2011

5340-12-153-1858
Nonmetallic Bumper

121531858
P009279932701000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-196-6770
Expansion Plug

121966770
3269970820: RNCC: 3 | RNVC: 2

1 Aug 1983

5340-12-044-0590

5340-12-175-9730
Support Hook

121759730
23176-183922.00.0: RNCC: 2 | RNVC: 2
23176-183922-00-0: RNCC: 5 | RNVC: 2
23176-183922-00-0: RNCC: 5 | RNVC: 9

2 Nov 1978

5340-12-309-9793
Mending Plate

123099793
2300223-207260.08.0: RNCC: 2 | RNVC: 2
2300223-207260.08.0: RNCC: 3 | RNVC: 2
3000008-207260.08.0: RNCC: 5 | RNVC: 9
A4-248.052-80: RNCC: 5 | RNVC: 9

25 Mar 1987

5340-12-318-2393
Double Angle Bracket

123182393
6600015-221: RNCC: 3 | RNVC: 2
6600015-221: RNCC: 5 | RNVC: 9

22 Jun 1989

5340-12-316-4762
Bow Handle

123164762
5600023-190233.000.0: RNCC: 2 | RNVC: 2
5600023-190233.000.0: RNCC: 3 | RNVC: 2
1271840: RNCC: 5 | RNVC: 2
22012.0.08.430.00: RNCC: 5 | RNVC: 2
22012.0.08.430.00: RNCC: 5 | RNVC: 9

19 Jan 1989

5340-12-314-9396
Retaining Strap

123149396
C39166-A34-C52: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-12-359-4376
Loop Clamp

123594376
DIN3016-1-D2-21-21X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-183-6590
Dust And Moisture Seal Protective Cap

121836590
32147-5-04: RNCC: 3 | RNVC: 2
0287 5553: RNCC: 5 | RNVC: 2
2875553: RNCC: 5 | RNVC: 2

8 May 1980

5340-12-306-2432
Lock-Release Lever

123062432
47715-001: RNCC: 3 | RNVC: 2
47 715-001: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-12-367-4412
Dust And Moisture Seal Protective Cap

123674412
E32735-00: RNCC: 3 | RNVC: 2

19 Aug 2005

5340-12-188-2529
Dust And Moisture Seal Protective Plug

121882529
TL-2-222: RNCC: 3 | RNVC: 2
TL2-222: RNCC: 5 | RNVC: 2

22 Jun 1981

5340-12-193-4338
Hand Carrying Strap Assembly

121934338
5400027-6000: RNCC: 2 | RNVC: 2
813.06: RNCC: 3 | RNVC: 2
54082-6000: RNCC: 5 | RNVC: 9

21 Jul 1982

5340-12-352-6594
Angle Bracket

123526594
5400049-724100.01: RNCC: 2 | RNVC: 2
5400049-724100.01: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-12-364-4402
Mounting Plate

123644402
23722228: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-12-191-3444
Metal Runner

121913444
CF 307 885: RNCC: 3 | RNVC: 2
CF 307 885: RNCC: 5 | RNVC: 2
CF307885: RNCC: 5 | RNVC: 2
CF307885: RNCC: 5 | RNVC: 9

26 Jan 1982

5340-12-318-4686
Mounting Bracket

123184686
81083405159: RNCC: 3 | RNVC: 2
81.08340.5159: RNCC: 5 | RNVC: 2

18 Jul 1989

5340-12-094-4746

5340-12-321-5792
Mending Plate

123215792
435.07.0007: RNCC: 2 | RNVC: 2
435.07.0007: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-320-7979
Resilient Mount

123207979
0224 3338: RNCC: 3 | RNVC: 2
2243338KZ0150-46: RNCC: 5 | RNVC: 2

16 Feb 1990

5340-12-024-7442

5340-12-332-3922
Mending Plate

123323922
DKAU021: RNCC: 3 | RNVC: 2

5 Aug 1993

5340-12-388-8571
Threaded Hinged Standoff

123888571
140.03.014: RNCC: 3 | RNVC: 2
140.03.014: RNCC: 5 | RNVC: 2

30 Apr 2012

5340-12-363-9870
Mounting Bracket

123639870
T531M3004228: RNCC: 2 | RNVC: 2
T531M3004228: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-042-1177

5340-12-389-1022
Expansion Shield

123891022
050124: RNCC: 3 | RNVC: 2

29 May 2012

5340-12-010-8539

5340-12-359-3203
Block Clamp

123593203
31422345802: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-330-2843
Escutcheon Plate

123302843
4584136: RNCC: 3 | RNVC: 9

26 Nov 1992

5340-12-328-5455
Mounting Bracket

123285455
52.3108.820.00: RNCC: 2 | RNVC: 2
52.3108.820.00: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-327-3082
Mending Plate

123273082
M465167: RNCC: 3 | RNVC: 9
M465167: RNCC: 5 | RNVC: 2

9 Jan 1992

5340-12-328-5459
Mounting Bracket

123285459
52.3109.811.00: RNCC: 2 | RNVC: 2
52.3109.811.00: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-337-3637
Dust And Moisture Seal Protective Plug

123373637
81960020130: RNCC: 3 | RNVC: 2
81.96002.0130: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-146-0498
Retaining Strap

121460498
6177935: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-3639
Strap Hinge Leaf

123503639
105-62542.09: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-175-4792
Nut And Bolt Locking Plate

121754792
SKAR5302RE: RNCC: 3 | RNVC: 2

19 Sep 1978

5340-12-393-4007
Manual Control Handle

123934007
91461: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-351-4167
Track Stop

123514167
10063-230100: RNCC: 3 | RNVC: 2
10063-230100: RNCC: 5 | RNVC: 9

25 Jul 2000

5340-12-349-0597
Mounting Bracket

123490597
2300387-700850.002: RNCC: 2 | RNVC: 2
9911484: RNCC: 3 | RNVC: 2
9911484: RNCC: 5 | RNVC: 9
2300387-700850.002: RNCC: 5 | RNVC: 9

20 Sep 1999

5340-12-389-5085
Loop Clamp

123895085
RSGU1.06/20 W1 EPDM: RNCC: 3 | RNVC: 2
51974010540: RNCC: 5 | RNVC: 2
09418620006: RNCC: 5 | RNVC: 2

16 Jul 2012

5340-12-148-4350
Loop Clamp

121484350
2213428111: RNCC: 3 | RNVC: 2
0746-640: RNCC: 5 | RNVC: 2
0746640: RNCC: 5 | RNVC: 2
8450317: RNCC: 5 | RNVC: 2
RE134-01: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-372-4002
Retaining Band

123724002
81974605251: RNCC: 3 | RNVC: 2
81.97460-5251: RNCC: 5 | RNVC: 2
81.97460.5251: RNCC: 5 | RNVC: 2

13 Jul 2007

5340-12-313-4483
Resilient Mount

123134483
DIN95363-B75X50-NR60ST: RNCC: 2 | RNVC: 2
811.010.075.050.12X37.NR60.ST: RNCC: 5 | RNVC: 2
81110-75X50-M12X37.NR60.ST: RNCC: 5 | RNVC: 2
781107MITTEL: RNCC: 5 | RNVC: 2
VG95363-B75X50-NR60ST: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-12-195-1963
Rod End Clevis

121951963
DIN71752-G6X12A3PMITES-BOLZENA3P: RNCC: 2 | RNVC: 2
17411012: RNCC: 3 | RNVC: 2
1002006012-023 AND1001006801-023: RNCC: 3 | RNVC: 2
DIN71752-G6X12A3PMITES-BOLZENA3P: RNCC: 3 | RNVC: 2
AFKB100200068001/024: RNCC: 3 | RNVC: 2
DIN71752-G6X12A3PMITES-BOLZENA3P: RNCC: 3 | RNVC: 2
G6X12 MIT FKB6X12VERZINKT: RNCC: 5 | RNVC: 2
G6X12DIN71752-A3P MIT SXN01-A3P: RNCC: 5 | RNVC: 2
DIN71752-G6X12-FKB6X12 GELBVERZ.: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-12-167-5125
Spring Tension Clip

121675125
62709: RNCC: 3 | RNVC: 2
03439692: RNCC: 5 | RNVC: 2
3439692EZ5505-04: RNCC: 5 | RNVC: 2
5505-04-08-05: RNCC: 5 | RNVC: 2
5505-04-08.05: RNCC: 5 | RNVC: 2

28 Dec 1976

5340-12-304-8664
Pad Eye

123048664
0241 4528: RNCC: 3 | RNVC: 2
02414528EE0147-01: RNCC: 5 | RNVC: 2

29 Aug 1985

5340-12-373-2130
Dust And Moisture Seal Protective Plug

123732130
550/002: RNCC: 3 | RNVC: 2
GPN550/002: RNCC: 5 | RNVC: 2
GPN550-002: RNCC: 5 | RNVC: 2

10 Oct 2007

5340-12-361-0838
Angle Bracket

123610838
J28130004-401: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-306-8814
Mending Plate

123068814
C150ZZ40001-000: RNCC: 3 | RNVC: 2

14 Apr 1986

5340-12-325-9043
Retaining Strap

123259043
3101-42.07000.03: RNCC: 2 | RNVC: 2
3101-42-07000.03: RNCC: 3 | RNVC: 2

22 Jul 1991

5340-12-379-4380
Angle Bracket

123794380
1541260: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-307-4462
Catch Strike

123074462
T12784: RNCC: 3 | RNVC: 2
T12784: RNCC: 5 | RNVC: 9

19 Jun 1986

5340-12-305-4971
Electrical-Mechanical Equipment Post

123054971
54.0028.308.04: RNCC: 3 | RNVC: 2

14 Nov 1985

5340-12-165-9518
Sliding Stay

121659518
2572-191300.01.0: RNCC: 2 | RNVC: 2
2572-191300.01.0: RNCC: 3 | RNVC: 2
2572-191300-01-0: RNCC: 3 | RNVC: 2
2572-191300.01.0: RNCC: 5 | RNVC: 9
2572-191300-01-0: RNCC: 5 | RNVC: 9
2572-191300.01.0: RNCC: 5 | RNVC: 9

23 Jul 1976

5340-12-700-8981
Rod End Connector

127008981
VG95211-ML-127008981: RNCC: 2 | RNVC: 2
2.11.5101.8890.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3629
Rod End Connector

127013629
VG95211-ML-127013629: RNCC: 2 | RNVC: 2
5.12.5301.0141.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-333-6217
Flush Lock

123336217
1000-U45: RNCC: 3 | RNVC: 2
0.29.6000.0: RNCC: 3 | RNVC: 2
200-9001: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-12-194-2331
Nonmetallic Bumper

121942331
5552639: RNCC: 3 | RNVC: 2
555.2639: RNCC: 5 | RNVC: 2

13 Oct 1982

5340-12-342-1559
Mounting Bracket

123421559
536D18005: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-349-9680
Angle Bracket

123499680
5802017-622101.07: RNCC: 2 | RNVC: 2
5802017-622101.07: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-12-361-1988
Mounting Bracket

123611988
7861011206: RNCC: 2 | RNVC: 2
7861011206: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-374-3215
Section Block Clamp

123743215
5324439: RNCC: 3 | RNVC: 2

7 Feb 2008

5340-12-308-9740
Mending Plate

123089740
2859060253: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-12-091-0886

5340-12-050-0754

5340-12-316-7317
Access Cover

123167317
51-51207: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-12-382-5832
Loop Clamp

123825832
0543166028: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-12-331-7662
Butt Hinge Leaf

123317662
10341101: RNCC: 2 | RNVC: 2
10341101: RNCC: 3 | RNVC: 2
EZ103411: RNCC: 5 | RNVC: 2

18 Jun 1993

5340-12-156-8811
Electrical-Mechanical Equipment Post

121568811
118494101: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-335-9839
Dust And Moisture Seal Protective Cap

123359839
BA733076A00C: RNCC: 3 | RNVC: 2

10 Oct 1994

5340-12-356-5126
Mounting Bracket

123565126
910-346-629-00: RNCC: 3 | RNVC: 9
271.157 520: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-368-6561
Mounting Plate

123686561
207049: RNCC: 3 | RNVC: 2
93243-1006.01: RNCC: 5 | RNVC: 2

4 Apr 2006

5340-12-388-7362
Webbing Strap

123887362
5768-200321A00C: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-12-197-1557
Dust And Moisture Seal Protective Cap

121971557
4212910093: RNCC: 3 | RNVC: 2

26 Sep 1983

5340-12-374-8298
Detent Plunger

123748298
L671M5001209: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-12-306-8332
Angle Bracket

123068332
23111-7247.00: RNCC: 2 | RNVC: 2
23111-7247.00: RNCC: 3 | RNVC: 2
23111-7247.00: RNCC: 5 | RNVC: 9

9 Apr 1986

5340-12-194-9509
Resilient Mount

121949509
DIN95363-A25X15-NR55ST: RNCC: 2 | RNVC: 2
500026-M6X20.NR55.ST: RNCC: 5 | RNVC: 2
20292A/A-BSTN5590: RNCC: 5 | RNVC: 2
33567309: RNCC: 5 | RNVC: 2
03351305: RNCC: 5 | RNVC: 2
3351305: RNCC: 5 | RNVC: 2
3351305EE5049-67: RNCC: 5 | RNVC: 2
1-51-103-00: RNCC: 5 | RNVC: 2
VG95363-A25X15-NR55ST: RNCC: 5 | RNVC: 9
F300 0T 021 7923: RNCC: 6 | RNVC: 9

21 Dec 1982

5340-12-321-7928
Mounting Bracket

123217928
P-888540-001: RNCC: 3 | RNVC: 2
P888540-001: RNCC: 5 | RNVC: 2

27 Jun 1990

5340-12-701-6214
Angle Bracket

127016214
VG95211-ML-127016214: RNCC: 2 | RNVC: 2
5.12.7020.1390.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-7992
Mounting Plate

123387992
6700017-634000.02: RNCC: 2 | RNVC: 2
6700017-634000.02: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-701-9959
Loop Clamp

127019959
VG95211-ML-127019959: RNCC: 2 | RNVC: 2
155N464-664: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-159-3312
Electrical-Mechanical Equipment Post

121593312
2137E108686-00: RNCC: 3 | RNVC: 2
2137-108686: RNCC: 5 | RNVC: 2
1392253-100035-002: RNCC: 5 | RNVC: 9
1392253-100035.002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-380-4836
Cushioning Pad

123804836
6140-07-00-00: RNCC: 3 | RNVC: 2
JS-6140-07-00-00: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-12-368-8648
Swivel Caster

123688648
LER-VPP 80R: RNCC: 3 | RNVC: 2
00166-230-000: RNCC: 5 | RNVC: 2

2 May 2006

5340-12-332-7874
Flange Protector

123327874
160-75651-223: RNCC: 3 | RNVC: 2
15160-75651-223: RNCC: 5 | RNVC: 2
160-75651-223: RNCC: 5 | RNVC: 9

20 Sep 1993

5340-12-390-4140
Spacing Threaded Standoff

123904140
1563023: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-356-5028
Mounting Bracket

123565028
14998: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-12-316-8284
Butt Hinge

123168284
2300279-4639.00: RNCC: 2 | RNVC: 2
2300279-4639.00: RNCC: 3 | RNVC: 2
2300279-4639.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-332-5887
Mounting Bracket

123325887
20-5120-780: RNCC: 3 | RNVC: 2

25 Aug 1993

5340-12-353-4420
Dust And Moisture Seal Protective Cap

123534420
2020267: RNCC: 3 | RNVC: 2

23 Mar 2001

5340-12-394-6448
Electronic Equipment Hardware Kit

123946448
71008666: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-304-0757
Double Angle Bracket

123040757
81974860404: RNCC: 3 | RNVC: 2
81.97486.0404: RNCC: 5 | RNVC: 2
81.12340.0007: RNCC: 5 | RNVC: 9
81123400007: RNCC: 5 | RNVC: 9

10 Jun 1985

5340-12-310-2377
Retaining Strap

123102377
6139631: RNCC: 3 | RNVC: 2

24 Apr 1987

5340-12-316-4706
Mounting Bracket

123164706
54.0026.865.00: RNCC: 3 | RNVC: 2
54002686500: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-331-9777
Butt Hinge

123319777
112 093: RNCC: 3 | RNVC: 2
112 093: RNCC: 5 | RNVC: 9

13 Jul 1993

5340-12-386-9395
Angle Bracket

123869395
X00008544: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-360-3497
Mounting Bracket

123603497
3516021910: RNCC: 3 | RNVC: 2
3516021910: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-325-9053
Sliding Door Hanger

123259053
M551129: RNCC: 3 | RNVC: 9
M551129: RNCC: 5 | RNVC: 2

22 Jul 1991

5340-12-148-3045
Nonmetallic Bumper

121483045
2360-012000.68.0: RNCC: 2 | RNVC: 2
741561MITTEL: RNCC: 3 | RNVC: 2
2360-012000.68.0: RNCC: 3 | RNVC: 2
57415610022: RNCC: 5 | RNVC: 2
2360-012000-68-0: RNCC: 5 | RNVC: 2
2360-012000-68-0: RNCC: 5 | RNVC: 2
2360-012000.68.0: RNCC: 5 | RNVC: 2
845-741561.NBR60.ST: RNCC: 5 | RNVC: 2
2360-012000.68.0: RNCC: 5 | RNVC: 2
2360-012000-68-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-8755
Angle Bracket

121968755
A-297137-002: RNCC: 3 | RNVC: 2
A297137-002: RNCC: 5 | RNVC: 2

29 Aug 1983

5340-12-186-2970
Spring Tension Clip

121862970
F01-212190-03-0: RNCC: 3 | RNVC: 2

13 Dec 1980

5340-12-184-9311
Compression Cup

121849311
3800029-20: RNCC: 2 | RNVC: 2

28 Aug 1980

5340-12-369-9371
Headless Straight Rod

123699371
201-0111-884: RNCC: 3 | RNVC: 2
201-0111.00-00884: RNCC: 5 | RNVC: 2

29 Aug 2006

5340-12-320-6498
Loop Clamp

123206498
DIN3015-LA-K-2R-16-PP-W1: RNCC: 2 | RNVC: 2
RAPR3-216: RNCC: 3 | RNVC: 2
SP216PP-DP-AS: RNCC: 3 | RNVC: 2
HRL2A16PP STMBL: RNCC: 3 | RNVC: 2
RAPR3-216: RNCC: 5 | RNVC: 2
SP216PPDP-AS: RNCC: 5 | RNVC: 2
DIN3015-LA2R-16PP-W1-K: RNCC: 5 | RNVC: 2
330230: RNCC: 5 | RNVC: 2
BW208534: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-392-6662
Rod End Clevis

123926662
0753079: RNCC: 3 | RNVC: 2
000214090001/013: RNCC: 5 | RNVC: 2

27 Jun 2013

5340-12-302-0956
Loop Clamp

123020956
068130431: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-313-8654
Double Angle Bracket

123138654
4244760536: RNCC: 3 | RNVC: 2
424 476 05 36: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-353-2099
Spacing Threaded Standoff

123532099
54.0084.618.09: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-314-5453
Mounting Bracket

123145453
3874321616: RNCC: 3 | RNVC: 2
387 432 16 16: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-351-3196
Mounting Plate

123513196
T311M3120101: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-301-5802
Pipe Bracket

123015802
4175141: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-301-5364
Double Angle Bracket

123015364
2300107-620000.03: RNCC: 2 | RNVC: 2
2300107-620000.03: RNCC: 3 | RNVC: 2
2300107-620000.03: RNCC: 5 | RNVC: 9
2300107-620000.03: RNCC: 5 | RNVC: 9

23 Oct 1984

5340-12-199-3001
Metal Runner

121993001
3529051017: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-12-307-7022
Angle Bracket

123077022
RP981791: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-351-3236
Mounting Bracket

123513236
2500113-5510: RNCC: 2 | RNVC: 2
2500113-5510: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-313-8130
Retaining Strap

123138130
651.6482.00: RNCC: 3 | RNVC: 2

7 May 1988

5340-12-360-9944
Mounting Bracket

123609944
0853 9583.001: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-131-7471

5340-12-358-4204
Mounting Bracket

123584204
0414 0146: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-12-153-6743

5340-12-390-2745
Door Holder

123902745
MVTH 626000200: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-12-358-9663
Mounting Bracket

123589663
T947M4011101: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-358-8181
Dust And Moisture Seal Protective Plug

123588181
646390208066: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-354-0518
Retaining Strap

123540518
E822025: RNCC: 3 | RNVC: 2

30 May 2001

5340-12-181-6507
Butt Hinge

121816507
DIN7954C30MSNI: RNCC: 2 | RNVC: 2
C30DIN7954MSNI: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-316-9988
Access Cover

123169988
2300279-9726.00: RNCC: 2 | RNVC: 2
2300279-9726.00: RNCC: 3 | RNVC: 2
9871683: RNCC: 5 | RNVC: 9
2300279-9726.00: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-381-2610
Dust And Moisture Seal Protective Cap

123812610
0501 214 034: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-12-350-3434
Access Cover

123503434
105-61021.01: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-348-6150
Mounting Bracket

123486150
NN31223P01: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-12-188-2461
Mounting Bracket

121882461
4312 712 19540: RNCC: 3 | RNVC: 2
431271219540: RNCC: 5 | RNVC: 2
5801685-212000-04: RNCC: 5 | RNVC: 9
5801685-212000.04: RNCC: 5 | RNVC: 9

22 Jun 1981

5340-12-362-6207
Turnbuckle Body

123626207
127382-12-01-0000-12: RNCC: 2 | RNVC: 2
127382-12-01-0000-12: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-178-3008
Electrical-Mechanical Equipment Post

121783008
C381-A26-C63: RNCC: 2 | RNVC: 2
C381A26C63: RNCC: 3 | RNVC: 2
C381A26C63: RNCC: 5 | RNVC: 2
C381-A26-C63: RNCC: 5 | RNVC: 2
C381-A26-C63: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-348-9863
Mechanical Stop

123489863
245/1552-01-00-18: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-134-1353
Butt Hinge Leaf

121341353
5565-06-29-40: RNCC: 3 | RNVC: 2
5565-06-29.40: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-314-1958
Angle Bracket

123141958
512214-0415.000: RNCC: 3 | RNVC: 2
512214-0415: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-12-389-4737
Handwheel

123894737
V8431: RNCC: 3 | RNVC: 2

11 Jul 2012

5340-12-354-8333
Butt Hinge Leaf

123548333
5400049-111843.06: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-173-6363
Mending Plate

121736363
7823-509: RNCC: 3 | RNVC: 9
7823509: RNCC: 5 | RNVC: 9
063510-4: RNCC: 5 | RNVC: 9

26 Apr 1978

5340-12-313-7012
Dust And Moisture Seal Protective Cap

123137012
42-10-398.3: RNCC: 3 | RNVC: 2

27 Apr 1988

5340-12-329-4613
Mending Plate

123294613
A-616776-017: RNCC: 3 | RNVC: 2
A616776-017: RNCC: 5 | RNVC: 2

21 Aug 1992

5340-12-374-6791
Mounting Plate

123746791
SK971-171224.001.0: RNCC: 3 | RNVC: 2
1728209: RNCC: 5 | RNVC: 2

6 Mar 2008

5340-12-701-3044
Mounting Plate

127013044
VG95211-ML-127013044: RNCC: 2 | RNVC: 2
5.12.5101.6149.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-144-6395
Retaining Strap

121446395
81974010423: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-348-4597
Runner

123484597
100034423: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-314-5450
Mounting Bracket

123145450
6204293640: RNCC: 3 | RNVC: 2
620 429 36 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-347-8970
Nut And Bolt Locking Plate

123478970
5800750073: RNCC: 3 | RNVC: 2
580 075 00 73: RNCC: 5 | RNVC: 2

8 Mar 1999

5340-12-357-3888
Section Block Clamp

123573888
T290M2003206: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-12-332-3301
Retaining Strap

123323301
1249 206 154: RNCC: 3 | RNVC: 2
5000241645: RNCC: 5 | RNVC: 2
1249206154: RNCC: 5 | RNVC: 2
1249 206 154: RNCC: 5 | RNVC: 9
1249206154: RNCC: 5 | RNVC: 9

29 Jul 1993

5340-12-360-9924
Access Cover

123609924
15048301: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-172-8143
Loop Clamp

121728143
LN9490BK28: RNCC: 2 | RNVC: 2

22 Feb 1978

5340-12-365-1251
Webbing Strap

123651251
4618980377: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-303-3207
Webbing Strap

123033207
Z2: RNCC: 3 | RNVC: 2

14 Mar 1985

5340-12-363-4388
Loop Clamp

123634388
740718: RNCC: 3 | RNVC: 2
8196944: RNCC: 5 | RNVC: 2

16 Jun 2004

Load More Results