5340-12-322-2208

5310-15-177-3668 5310151773668 151773668 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3040-00-177-3668 3040001773668 001773668 LINING,ELECTRIC BRA

6740-01-177-3668 6740011773668 011773668

333-9946 Nonmetallic Special Shaped Section Seal 1127924RNCC: 5 | RNVC: 2 | DAC: 4 7 Mar 1994 5340-12-322-2208