What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 53 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 53 of 178

5340-12-332-6287
Retaining Strap

123326287
81254410357: RNCC: 2 | RNVC: 2
81254410357: RNCC: 3 | RNVC: 2
81.25441.0357: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-337-9991
Helical Compression Spring Seat

123379991
0210 8098: RNCC: 3 | RNVC: 2
2108098: RNCC: 5 | RNVC: 2
02108098EB013808: RNCC: 5 | RNVC: 2

10 May 1995

5340-12-134-7261

5340-12-317-1993
Mounting Bracket

123171993
3404280240: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-378-7498
Lock-Release Lever

123787498
063937: RNCC: 3 | RNVC: 2

8 May 2009

5340-12-388-6868
Protection Bellows

123886868
4812070541: RNCC: 3 | RNVC: 2

13 Apr 2012

5340-12-091-3377

5340-12-314-6743
Dust And Moisture Seal Protective Plug

123146743
0295 0603: RNCC: 3 | RNVC: 2
2950603: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-180-2728
Resilient Mount

121802728
3575256: RNCC: 3 | RNVC: 2
3575256: RNCC: 5 | RNVC: 2

31 Aug 1979

5340-12-362-7626
Mounting Bracket

123627626
303120: RNCC: 3 | RNVC: 2

27 Mar 2004

5340-12-332-5910
Lock-Release Lever

123325910
021382: RNCC: 3 | RNVC: 2
21382: RNCC: 5 | RNVC: 2

25 Aug 1993

5340-12-387-6458
Mounting Bracket

123876458
40001199: RNCC: 3 | RNVC: 2
30067715: RNCC: 5 | RNVC: 2

19 Jan 2012

5340-12-317-1983
Plug Button

123171983
3226890030: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-128-0715

5340-12-177-0766
Retaining Band

121770766
81974605168: RNCC: 3 | RNVC: 2

12 Jan 1979

5340-12-022-1457

5340-12-316-6002
Metal Runner

123166002
23182-8100.05: RNCC: 2 | RNVC: 2
23182-8100.05: RNCC: 3 | RNVC: 2
23182-8100.05: RNCC: 5 | RNVC: 2

27 Jan 1989

5340-12-011-5809

5340-12-324-1313
Catch Strike

123241313
0368601: RNCC: 3 | RNVC: 2

23 Jan 1991

5340-12-148-1954
Retaining Strap

121481954
81974010457: RNCC: 3 | RNVC: 2
25-4E22081: RNCC: 5 | RNVC: 2
81.97401-0457: RNCC: 5 | RNVC: 2
22081: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-371-8123
Spring Tension Clip

123718123
0501214086: RNCC: 3 | RNVC: 2

18 May 2007

5340-12-161-8246
Electrical-Mechanical Equipment Post

121618246
100332-16110.01: RNCC: 2 | RNVC: 2
100332-16110.01: RNCC: 5 | RNVC: 2
100332-16110-01: RNCC: 5 | RNVC: 2
100332-16110-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-1461
Grooved Clamp Coupling Half

123071461
LN9293-B20: RNCC: 2 | RNVC: 2
B20LN9293: RNCC: 5 | RNVC: 2

15 May 1986

5340-12-321-9179
Mending Plate

123219179
DKAV012: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-338-1333
Access Cover

123381333
160-75726: RNCC: 3 | RNVC: 2
15160-75726: RNCC: 5 | RNVC: 2
160-75726: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-392-5569
Dust And Moisture Seal Protective Cover

123925569
D3-180-38: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-12-331-6757
Bail Handle

123316757
205/120MM GZ: RNCC: 3 | RNVC: 2
NO.205/120 GZ: RNCC: 3 | RNVC: 2
0853 0230.013: RNCC: 5 | RNVC: 2
8530230.013: RNCC: 5 | RNVC: 2
205 GZ: RNCC: 5 | RNVC: 9
205: RNCC: 5 | RNVC: 9
NO.205 GZ: RNCC: 5 | RNVC: 9

7 Jun 1993

5340-12-313-3544
Angle Bracket

123133544
8449066: RNCC: 3 | RNVC: 2
0627-595: RNCC: 5 | RNVC: 2
0627595: RNCC: 5 | RNVC: 2

24 Mar 1988

5340-12-163-9508
Retaining Strap

121639508
V22.228.530000-29: RNCC: 3 | RNVC: 2
V2.228.530000-29: RNCC: 5 | RNVC: 2
V2-228-530000-29: RNCC: 5 | RNVC: 2
V22-228-530000-29EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-145-0282
Spring Tension Clip

121450282
1202 2981: RNCC: 3 | RNVC: 2
KLS19GU-19GU: RNCC: 3 | RNVC: 2
5809919019: RNCC: 5 | RNVC: 2
KLSGU19-19: RNCC: 5 | RNVC: 2
12022981: RNCC: 5 | RNVC: 2
3.0402.01.0.0021: RNCC: 5 | RNVC: 2
30-3061-11: RNCC: 5 | RNVC: 9
3-0402-01-0-0021: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-2625
Lock-Release Lever

123122625
927176-1: RNCC: 3 | RNVC: 2
0-0-927176-1: RNCC: 5 | RNVC: 9

10 Dec 1987

5340-12-175-8920
Nonmetallic Solid Wheel

121758920
20-5280-008-11: RNCC: 3 | RNVC: 2

25 Oct 1978

5340-12-701-9943
Loop Clamp

127019943
VG95211-ML-127019943: RNCC: 2 | RNVC: 2
155N464-566: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-158-7188
Dust And Moisture Seal Protective Plug

121587188
414-0013: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-168-9899
Helical Compression Spring Retainer

121689899
WW415253B: RNCC: 3 | RNVC: 9
WW415253B: RNCC: 5 | RNVC: 2
WW 415 253 B: RNCC: 5 | RNVC: 2
WW415253B: RNCC: 5 | RNVC: 2
WW 415 253 B: RNCC: 5 | RNVC: 9

13 Apr 1977

5340-12-199-2737
Coat And Hat Hook

121992737
YN171-178-1: RNCC: 2 | RNVC: 2
105903: RNCC: 3 | RNVC: 2
YN171-178-1: RNCC: 5 | RNVC: 2
4244: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-12-192-9804
Retaining Strap

121929804
4607910006: RNCC: 3 | RNVC: 2
721 1 75 033 1: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-197-3770
Angle Bracket

121973770
WW210144C: RNCC: 3 | RNVC: 2
WW210144C: RNCC: 5 | RNVC: 2
WW 210 144 C: RNCC: 5 | RNVC: 2
WW210144C: RNCC: 5 | RNVC: 2

18 Oct 1983

5340-12-350-9028
Helical Compression Spring Seat

123509028
23176-208581-01-0: RNCC: 2 | RNVC: 2
H4486-13-4: RNCC: 3 | RNVC: 2

31 May 2000

5340-12-354-4110
Access Cover

123544110
135 1037/2: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-368-1322
Mounting Bracket

123681322
5161-340200A02B: RNCC: 2 | RNVC: 2
5161-340200A02B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-123-1406
Nonmetallic Bumper

121231406
03428627: RNCC: 3 | RNVC: 2
3428627EE5071-01: RNCC: 5 | RNVC: 2
5165-01-41-04: RNCC: 5 | RNVC: 2
5165-01-41.04: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-372-4799
Flush Lock

123724799
10060042: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-311-5877
Mending Plate

123115877
6600133-341100.007: RNCC: 2 | RNVC: 2
001 585 501-116: RNCC: 3 | RNVC: 2

23 Sep 1987

5340-12-136-2234
Nonmetallic Bumper

121362234
81961012006: RNCC: 3 | RNVC: 2
81.96101-2006: RNCC: 5 | RNVC: 2
00.37061-6181: RNCC: 5 | RNVC: 2
00370616181: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-153-6077
Nut And Bolt Locking Plate

121536077
100355-114000.04: RNCC: 2 | RNVC: 2
100355-114000-04: RNCC: 5 | RNVC: 2
100355-114000.04: RNCC: 5 | RNVC: 2
100355-114000-04: RNCC: 5 | RNVC: 9
100355-114000.04: RNCC: 5 | RNVC: 9
100355-114000-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-0681
Expansion Shield

123390681
53260: RNCC: 3 | RNVC: 2
FU 6X35: RNCC: 5 | RNVC: 2
53260: RNCC: 5 | RNVC: 2

5 Oct 1995

5340-12-378-8484
Nut And Bolt Retainer

123788484
0893 603 050: RNCC: 3 | RNVC: 2
238219224308: RNCC: 6 | RNVC: 9
A0893 603 050: RNCC: 6 | RNVC: 9

19 May 2009

5340-12-378-0497
Loop Clamp

123780497
41013533: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-358-3221
Turnbuckle Body

123583221
001480 010200: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-381-0880
Manual Control Handle

123810880
0009182660: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-12-339-4922
Mending Plate

123394922
88974800448: RNCC: 3 | RNVC: 2
88.97480.0448: RNCC: 5 | RNVC: 2

28 Nov 1995

5340-12-161-1083
Rod End Connector

121611083
8BTAN16725: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-361-9979
Pawl Fastener

123619979
1000-U343: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-025-4428

5340-12-177-1423
Nonmetallic Bumper

121771423
98408001: RNCC: 3 | RNVC: 2
4020780186: RNCC: 3 | RNVC: 2

17 Jan 1979

5340-12-350-1718
Mounting Bracket

123501718
VG95211-ML-123501718: RNCC: 2 | RNVC: 2
774-109-20/05: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-12-342-5355
Mounting Plate

123425355
70.406.01.562: RNCC: 3 | RNVC: 2
7040601562: RNCC: 5 | RNVC: 2

25 Feb 1997

5340-12-343-9245
Spring Tension Clip

123439245
1067552: RNCC: 3 | RNVC: 2

13 Aug 1997

5340-12-306-3490
Retaining Clip

123063490
DIN71805-S16-A4P: RNCC: 2 | RNVC: 2
DIN71805-S16-A4P: RNCC: 3 | RNVC: 2
01102270: RNCC: 5 | RNVC: 2
S16DIN71805-A4P: RNCC: 5 | RNVC: 2

20 Feb 1986

5340-12-346-7696
Angle Bracket

123467696
462-630410.005: RNCC: 3 | RNVC: 9
000373-410000.05: RNCC: 5 | RNVC: 2
462-630410.005: RNCC: 5 | RNVC: 2
9900105: RNCC: 5 | RNVC: 9

9 Sep 1998

5340-12-341-4867
Handwheel

123414867
0101220135: RNCC: 3 | RNVC: 2
0101 220 135: RNCC: 5 | RNVC: 2
10.006 100MM POS6: RNCC: 5 | RNVC: 2
22.006 100MM POS 6: RNCC: 5 | RNVC: 2

10 Sep 1996

5340-12-358-2034
Exit Bolt

123582034
2500075-191213.000.0: RNCC: 2 | RNVC: 2
2500075-191213.000.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-342-9226
Angle Bracket

123429226
2300211-206100.020.0: RNCC: 2 | RNVC: 2
2300211-206100.020.0: RNCC: 3 | RNVC: 2
520.00.660: RNCC: 5 | RNVC: 2

16 Apr 1997

5340-12-325-7140
Double Angle Bracket

123257140
61114-024000.01.0: RNCC: 2 | RNVC: 2
61114-024000.01.0: RNCC: 3 | RNVC: 2
61114-024000.01.0: RNCC: 5 | RNVC: 2

2 Jul 1991

5340-12-172-2524
Flush Catch Claw

121722524
VG95136A40X33-TEIL 2: RNCC: 2 | RNVC: 2
VG95136A40X33-TEIL 2: RNCC: 3 | RNVC: 2
602K0114-3: RNCC: 3 | RNVC: 2
VG95136A40X33-TEIL 2: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-305-2564
Angle Bracket

123052564
4900059-111222.000.0/2: RNCC: 3 | RNVC: 2
4900059-111222.002.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-321-2684
Mounting Bracket

123212684
0110.0110.00: RNCC: 3 | RNVC: 2
18043-3.4/50: RNCC: 3 | RNVC: 2
110.0110: RNCC: 5 | RNVC: 2
1100110: RNCC: 5 | RNVC: 2
18043-3-4-50: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-12-320-3032
Retaining Strap

123203032
H7673-C2X3,3/6: RNCC: 3 | RNVC: 2
4082790: RNCC: 5 | RNVC: 2
0117 3910: RNCC: 5 | RNVC: 2
01173910ES8250-29: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-149-7691
Nonmetallic Bumper

121497691
5800600-0080-005: RNCC: 2 | RNVC: 2
6P362-80-5: RNCC: 5 | RNVC: 2
5800600-0080-005: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-152-6530
Nonmetallic Bumper

121526530
199036-217130.06: RNCC: 2 | RNVC: 2
199036-217130.06: RNCC: 3 | RNVC: 2
199036-217130-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-6284
Kunst Gleitschiene

121996284
2300002-061010.007: RNCC: 2 | RNVC: 2
2300002-061010.007: RNCC: 3 | RNVC: 2
2300002-061010-007: RNCC: 5 | RNVC: 9
2300002-061010.007: RNCC: 5 | RNVC: 9

17 May 1984

5340-12-365-4877
Casement Fastener

123654877
200-9401-200-0610-200-0001: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-12-702-4148
Manual Control Handle

127024148
VG95211-ML-127024148: RNCC: 2 | RNVC: 2
5.12.6501.1560.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-6612
Double Angle Bracket

123076612
1218 9393: RNCC: 3 | RNVC: 2
6.226.0.982.058.4: RNCC: 5 | RNVC: 9
12189393: RNCC: 5 | RNVC: 9
6-226-0-982-058-4: RNCC: 5 | RNVC: 9

14 Jul 1986

5340-12-303-5575
Mending Plate

123035575
3-40VG85027: RNCC: 2 | RNVC: 2
HALTERING 3-40VG85027: RNCC: 5 | RNVC: 2

4 Apr 1985

5340-12-190-1370
Rigid Caster

121901370
20-5170-037: RNCC: 3 | RNVC: 2

9 Nov 1981

5340-12-301-6127
Catch Strike

123016127
183801975: RNCC: 3 | RNVC: 2

26 Oct 1984

5340-12-310-9970
Nonmetallic Bumper

123109970
00902800: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-172-2031
Loop Clamp

121722031
LN9491A12: RNCC: 2 | RNVC: 2

3 Jan 1978

5340-12-179-5477
Angle Bracket

121795477
C381-A26-C56: RNCC: 2 | RNVC: 2
C381A26C56: RNCC: 3 | RNVC: 2
C381-A26-C56: RNCC: 5 | RNVC: 2
C381A26C56: RNCC: 5 | RNVC: 2
C381-A26-C56: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-331-6882
Mounting Bracket

123316882
480-7397-26-15-00: RNCC: 3 | RNVC: 2
480/7397-26-15-00: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-12-125-0373
Karabiner- Haken

5340-12-125-1656
Krampe Mit Platte

5340-12-131-5614
Spannschlosz

5340-12-132-9635
Krampe Mit Platte

5340-12-363-9868
Angle Bracket

123639868
T531M3004117: RNCC: 2 | RNVC: 2
T531M3004117: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-373-1634
Retaining Strap

123731634
1409950422: RNCC: 3 | RNVC: 2
140 995 04 22: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-12-313-4391
Caster Frame

123134391
2300013-4801.08: RNCC: 2 | RNVC: 2
2300013-4801.08: RNCC: 3 | RNVC: 2
2300013-4801.08: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-12-321-6115
Mounting Bracket

123216115
124313: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-125-4429

5340-12-177-8934
Mounting Bracket

121778934
4021591840: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-358-4928
Spring Tension Clip

123584928
L.S.101/16-S-SCHWARZ: RNCC: 3 | RNVC: 2

22 Oct 2002

5340-12-305-0584
Mending Plate

123050584
A-296712-451: RNCC: 3 | RNVC: 2
A296712-451: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-304-7898
Manual Control Handle

123047898
8.316.001.007.10.00: RNCC: 3 | RNVC: 2
BHB500-313-1P0S7: RNCC: 5 | RNVC: 2
8.316.001.007.02.00: RNCC: 5 | RNVC: 2
2490878: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-331-9420
Access Cover

123319420
SK544-790302.000.0: RNCC: 2 | RNVC: 2
SK544-790302.000.0: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-12-389-2532
Spring Holder

123892532
9999260-185101.023.0: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-12-321-6141
Mending Plate

123216141
702-143800-901-0: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-199-9394
Bow Handle

121999394
5820104: RNCC: 3 | RNVC: 2
2638-205: RNCC: 5 | RNVC: 2
2638205: RNCC: 5 | RNVC: 2
582K0538-000-003: RNCC: 5 | RNVC: 2
2638205: RNCC: 5 | RNVC: 2
4-2638-205: RNCC: 5 | RNVC: 2
582K0538: RNCC: 5 | RNVC: 2
0666477: RNCC: 5 | RNVC: 2
666477: RNCC: 5 | RNVC: 9

20 Jun 1984

5340-12-174-0444
Rod End Clevis

121740444
8408861: RNCC: 3 | RNVC: 2
1412240: RNCC: 5 | RNVC: 2
1412-240: RNCC: 5 | RNVC: 2

6 Jun 1978

5340-12-317-7452
Double Angle Bracket

123177452
P-296885-423: RNCC: 3 | RNVC: 2
P296885-423: RNCC: 5 | RNVC: 2

8 May 1989

5340-12-389-0229
Runner

123890229
BANDEN10048-1,5X20X250SSTAHLEN1-: RNCC: 2 | RNVC: 2
NK1,5X20X250-1.4571-N.DIN-EN100-: RNCC: 3 | RNVC: 2

16 May 2012

5340-12-339-8454
Dust And Moisture Seal Protective Plug

123398454
U1229: RNCC: 3 | RNVC: 2
U1229: RNCC: 5 | RNVC: 2
03-0720101: RNCC: 5 | RNVC: 2
U1229: RNCC: 5 | RNVC: 9

24 Jan 1996

5340-12-169-1689
Turnbuckle Body

121691689
WW410831: RNCC: 3 | RNVC: 2
WW410831: RNCC: 5 | RNVC: 2
WW410831: RNCC: 5 | RNVC: 2
WW 410 831: RNCC: 5 | RNVC: 2

20 Apr 1977

5340-12-322-7376
Helical Compression Spring Seat

123227376
4603250715: RNCC: 3 | RNVC: 2

18 Sep 1990

5340-12-302-0144
Loop Clamp

123020144
51.1545.000.06: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-12-024-6078

5340-12-316-8778
Mounting Bracket

123168778
GHS210 1926 R0002: RNCC: 3 | RNVC: 2
GHS2101926R2: RNCC: 5 | RNVC: 2
GHS210 1926 R0002: RNCC: 5 | RNVC: 2

20 Feb 1989

5340-12-197-7471
Helical Compression Spring Retainer

121977471
3229301: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-170-2436
Spring Tension Clip

121702436
PAN3089-14: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-352-6121
Access Cover

123526121
8262-0009: RNCC: 2 | RNVC: 2
8262-0009: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-317-6001
Access Cover

123176001
171-02/64206: RNCC: 2 | RNVC: 2
171-02/64206: RNCC: 3 | RNVC: 2
171-02/64206: RNCC: 5 | RNVC: 9

20 Apr 1989

5340-12-318-2654
Expansion Plug

123182654
DIN443-36-ST-A3P: RNCC: 2 | RNVC: 2
50207200: RNCC: 5 | RNVC: 2
0630 361 071: RNCC: 5 | RNVC: 2
640016036: RNCC: 5 | RNVC: 2
0630361071: RNCC: 5 | RNVC: 9

23 Jun 1989

5340-12-317-9576
Electrical-Mechanical Equipment Post

123179576
1911929: RNCC: 3 | RNVC: 2
97E2.159.05-10: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-334-8646
Mounting Plate

123348646
2300002-031121.000: RNCC: 2 | RNVC: 2
2300002-031121.000: RNCC: 3 | RNVC: 2
2300002-031121: RNCC: 5 | RNVC: 9
2300002-031121: RNCC: 5 | RNVC: 9

29 Jun 1994

5340-12-362-6917
Mounting Plate

123626917
1A807.41-01-01-00-002: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-183-7227
Loop Clamp

121837227
PAN6636A24: RNCC: 3 | RNVC: 2

15 May 1980

5340-12-321-0373
Door Button

123210373
797.570.000: RNCC: 3 | RNVC: 2

20 Mar 1990

5340-12-391-4814
Bumper

123914814
46174002146431: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-341-5513
Butt Hinge Leaf

123415513
1852401: RNCC: 3 | RNVC: 2
EZ18524: RNCC: 5 | RNVC: 2

19 Sep 1996

5340-12-190-3003
Angle Bracket

121903003
1421331033: RNCC: 3 | RNVC: 2

17 Nov 1981

5340-12-301-6904
Mending Plate

123016904
240539E45001: RNCC: 3 | RNVC: 2
240539: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-301-7019
Lock-Release Lever

123017019
116 030: RNCC: 3 | RNVC: 2
116030: RNCC: 5 | RNVC: 2
116 030: RNCC: 5 | RNVC: 2
116005: RNCC: 5 | RNVC: 2
116 030: RNCC: 5 | RNVC: 9
116005: RNCC: 5 | RNVC: 9
116030: RNCC: 5 | RNVC: 9

3 Nov 1984

5340-12-185-2533
Dust And Moisture Seal Protective Plug

121852533
VG81299W21,7: RNCC: 2 | RNVC: 2
300F182: RNCC: 3 | RNVC: 2
GPN300F182: RNCC: 5 | RNVC: 2
3007-005: RNCC: 5 | RNVC: 2
3007005: RNCC: 5 | RNVC: 2
300018200: RNCC: 5 | RNVC: 9
F182: RNCC: 5 | RNVC: 9
F182GPN300: RNCC: 5 | RNVC: 9
GPN300,F182: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-191-7315
Nonmetallic Bumper

121917315
4603520465: RNCC: 3 | RNVC: 2
5160-03: RNCC: 5 | RNVC: 2
721 1 34 001 1: RNCC: 5 | RNVC: 9
121917315: RNCC: 6 | RNVC: 9

1 Mar 1982

5340-12-322-7049
Flush Lock

123227049
1 239 754: RNCC: 3 | RNVC: 2
51 25 1 242 327: RNCC: 5 | RNVC: 2
51.25-1242327: RNCC: 5 | RNVC: 2

13 Sep 1990

5340-12-354-5390
Mounting Bracket

123545390
54.0054.326.00: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-343-9811
Mounting Bracket

123439811
536519-0828.000: RNCC: 2 | RNVC: 2
536519-0828.000: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-12-175-1848
Angle Bracket

121751848
03426616: RNCC: 3 | RNVC: 2
3426616EE5091-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-338-8042
Mounting Plate

123388042
6700017-202331.00: RNCC: 2 | RNVC: 2
6700017-202331.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-381-1786
Plug Button

123811786
5-400-041: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-12-335-4960
Retaining Strap

123354960
2300014-020100.23.0: RNCC: 2 | RNVC: 2
45 940 38 241: RNCC: 3 | RNVC: 2
2300014-020100.23.0: RNCC: 5 | RNVC: 2

23 Aug 1994

5340-12-148-3216
Hand Crank

121483216
VG85086-B-100X9-GT: RNCC: 2 | RNVC: 2
VG85086-B-100X9-GT: RNCC: 3 | RNVC: 2
VG85086-B-100X9-GT: RNCC: 3 | RNVC: 2
VG85086-B-100X9-GT: RNCC: 3 | RNVC: 9
604116: RNCC: 5 | RNVC: 2
61820070: RNCC: 5 | RNVC: 2
B100X9VG85086-GTW-40: RNCC: 5 | RNVC: 9
B100X9VG85086GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-0561
Door Button

123110561
25704-190252.00.0: RNCC: 2 | RNVC: 2
25704-190252.00.0: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-12-702-6229
Dust And Moisture Seal Protective Cap

127026229
VG95211-ML-127026229: RNCC: 2 | RNVC: 2
7 OST1 10471-72: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-364-3912
Catch Strike

123643912
5981-182200.005.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-702-4021
Mounting Bracket

127024021
VG95211-ML-127024021: RNCC: 2 | RNVC: 2
5.12.5811.1930.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-305-1109
Mending Plate

123051109
4900059-111130.005.0: RNCC: 3 | RNVC: 2
1228084: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-197-7694
Angle Bracket

121977694
A-145401-099: RNCC: 3 | RNVC: 2
A145401-099: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-371-5816
Air Inlet-Outlet Frame

123715816
5400053-182058.000.0: RNCC: 3 | RNVC: 2
1581318: RNCC: 5 | RNVC: 9

20 Apr 2007

5340-12-353-9057
Dust And Moisture Seal Protective Cap

123539057
GN806-19-A: RNCC: 3 | RNVC: 2

17 May 2001

5340-12-352-2706
Rod End Clevis

123522706
521910-190233.000.0: RNCC: 2 | RNVC: 2
1271888: RNCC: 3 | RNVC: 2
521910-190233.000.0: RNCC: 5 | RNVC: 2
22013.0.08.311.00: RNCC: 5 | RNVC: 9

31 Oct 2000

5340-12-393-2360
Rod End Clevis

123932360
GN751-8-32-M8-B: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-12-306-3999
Mending Plate

123063999
V22.917.2-19: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-702-4197
Mounting Bracket

127024197
VG95211-ML-127024197: RNCC: 2 | RNVC: 2
5.12.7070.1220.09: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-2738
Mounting Plate

123652738
4258100042: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-313-7387
Helical Compression Spring Seat

123137387
1460500303: RNCC: 3 | RNVC: 2
1460500303: RNCC: 3 | RNVC: 2
(7001)5340123137387: RNCC: 5 | RNVC: 2
9982789: RNCC: 5 | RNVC: 2
1460500303: RNCC: 5 | RNVC: 2

29 Apr 1988

5340-12-370-5194
Mounting Bracket

123705194
7803204200AA: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-12-387-9273
Mounting Bracket

123879273
7093648: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-141-3150
Coat And Hat Hook

121413150
FM140: RNCC: 3 | RNVC: 2
2509FKUE805-812: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-372-4523
Dust And Moisture Seal Boot

123724523
42217068801: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-12-198-0979
Retaining Strap

121980979
1200096-15D200001: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-380-6678
Nut And Bolt Head Protective Cap

123806678
N91301801200: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-12-302-0849
Double Angle Bracket

123020849
3875205341: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-356-7483
Rod End Clevis

123567483
T622M1301207: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-388-0656
Engine Plate

123880656
6623171231: RNCC: 3 | RNVC: 1

22 Feb 2012

5340-12-359-0636
Dust And Moisture Seal Protective Cap

123590636
1239870045: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-351-7819
Dust And Moisture Seal Protective Cap

123517819
1420505033: RNCC: 3 | RNVC: 2

22 Aug 2000

5340-12-352-1465
Mounting Bracket

123521465
5205417: RNCC: 3 | RNVC: 2

20 Oct 2000

5340-12-351-5085
Loop Clamp

123515085
4614285041: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-339-3778
Butt Hinge

123393778
4303610054: RNCC: 3 | RNVC: 2

16 Nov 1995

5340-12-382-6972
Block Clamp

123826972
5200.230.031.001: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-300-2622
Double Angle Bracket

123002622
5801411-4125.018: RNCC: 3 | RNVC: 2
5801411-4125-018: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-190-7211
Cane Bolt

121907211
NO PRIMARY REF 12-190-7211: RNCC: 3 | RNVC: 2
25-86087-06: RNCC: 5 | RNVC: 9
25/86087.06: RNCC: 5 | RNVC: 9
7811 908656: RNCC: 5 | RNVC: 9
7811908656: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-324-1025
Case Corner

123241025
C22107-A300-C110: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-12-186-5080
Metal Runner

121865080
100L55-7121-011-00-08: RNCC: 2 | RNVC: 2
100L55-7121-011-00-08: RNCC: 5 | RNVC: 2

12 Jan 1981

5340-12-344-3849
Double Angle Bracket

123443849
A-296713-019: RNCC: 3 | RNVC: 2
A296713-019: RNCC: 5 | RNVC: 2

22 Oct 1997

5340-12-165-6566
Expansion Plug

121656566
0336 1334: RNCC: 3 | RNVC: 2
4060140: RNCC: 5 | RNVC: 2
0146-01-13-85: RNCC: 5 | RNVC: 2
3361334EE0146-01: RNCC: 5 | RNVC: 2
E0146-01-13.85: RNCC: 5 | RNVC: 2
VDPM00344: RNCC: 5 | RNVC: 2
3361334: RNCC: 5 | RNVC: 9

11 Jun 1976

5340-12-373-8515
Nonmetallic Bumper

123738515
233169: RNCC: 3 | RNVC: 2
94454-600.02: RNCC: 5 | RNVC: 2

12 Dec 2007

5340-12-337-3820
Double Angle Bracket

123373820
454-250708.000: RNCC: 3 | RNVC: 2
454-250708.000: RNCC: 5 | RNVC: 9
9892620: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-12-134-1905
Plain Solid Disk

121341905
7963 032 103: RNCC: 3 | RNVC: 2
8751-71-10-15: RNCC: 5 | RNVC: 2
8751-71-10.15: RNCC: 5 | RNVC: 2
7963032103: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-352-3751
Mounting Plate

123523751
533-250420.00.0: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-12-302-1489
Mending Plate

123021489
A-716653-405: RNCC: 3 | RNVC: 2
A716653-405: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-702-5251
Mounting Bracket

127025251
VG95211-ML-127025251: RNCC: 2 | RNVC: 2
5.51.7010.0240: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-381-2857
Block Clamp

123812857
RAN010X: RNCC: 3 | RNVC: 2
1516850: RNCC: 5 | RNVC: 2
RAN010X: RNCC: 5 | RNVC: 2
15013644: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-12-325-7577
Manual Control Handle

123257577
9617037322: RNCC: 3 | RNVC: 2

5 Jul 1991

5340-12-313-9297
Shimmy Damper

123139297
089737: RNCC: 3 | RNVC: 2
03-08-060-109-0400N: RNCC: 5 | RNVC: 2

20 May 1988

5340-12-393-4326
Mounting Bracket

123934326
J92222378-005: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-12-387-9010
Access Cover

123879010
SFK-804-0701-001-0000A: RNCC: 3 | RNVC: 2
179443: RNCC: 5 | RNVC: 2

7 Feb 2012

5340-12-348-7711
Dust And Moisture Seal Protective Plug

123487711
800X(SIZEDN80): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-190-8770
Helical Compression Spring Seat

121908770
2410320074: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-358-9654
Loop Clamp

123589654
068130431C: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-359-1943
Mounting Bracket

123591943
9415405673: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-092-2648

5340-12-339-0216
Lock-Release Lever

123390216
18.41.102.00: RNCC: 3 | RNVC: 2
0008333625: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-134-0698
Resilient Mount

121340698
845-OQ5.00-NR50.ST: RNCC: 3 | RNVC: 2
OQ5.00/35A: RNCC: 3 | RNVC: 9
0342 9481: RNCC: 5 | RNVC: 2
3429481EE5051-56: RNCC: 5 | RNVC: 2
5165-56-01-41: RNCC: 5 | RNVC: 2
5165-56-01-41: RNCC: 5 | RNVC: 2
5165-56-01.41: RNCC: 5 | RNVC: 2
E5165-56-01-41: RNCC: 5 | RNVC: 2
3429481: RNCC: 5 | RNVC: 9
0Q5-00-35A: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-094-9261
Stift

120949261
A4-40SENIR0: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-314-7805
Spring Tension Clip

123147805
C42107-A435-C343: RNCC: 3 | RNVC: 2

10 Aug 1988

5340-12-370-9216
Permanent Magnet

123709216
250-ZG 1514-12.310: RNCC: 3 | RNVC: 2

16 Jan 2007

5340-12-330-1976
Webbing Strap

123301976
2500117-50700: RNCC: 2 | RNVC: 2
2500117-50700: RNCC: 3 | RNVC: 2
000-A3-20X2,0X1500-BW-RAL6031: RNCC: 6 | RNVC: 9

13 Nov 1992

5340-12-199-1141
Angle Bracket

121991141
AW7048.660.23-A001: RNCC: 3 | RNVC: 2
746673: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-342-3790
Access Cover

123423790
SP06953: RNCC: 3 | RNVC: 2
50.4.864.0001: RNCC: 5 | RNVC: 9

30 Jan 1997

5340-12-166-8020
Nonmetallic Bumper

121668020
603D035: RNCC: 3 | RNVC: 2
03439719: RNCC: 5 | RNVC: 2
3439719EZ5505-04: RNCC: 5 | RNVC: 2
603K0089-2: RNCC: 5 | RNVC: 2

21 Oct 1976

5340-12-389-9728
Mounting Bracket

123899728
2300571-189814.000.0: RNCC: 2 | RNVC: 2
2300571-189814.000.0: RNCC: 3 | RNVC: 2

19 Sep 2012

5340-12-348-6291
Blank Panel

123486291
M10-74-107-16-0: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-701-6663
Mounting Plate

127016663
VG95211-ML-127016663: RNCC: 2 | RNVC: 2
5.12.7210.8004.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-5046
Dust And Moisture Seal Protective Cap

123635046
1-04-010-5-00000-B3-2: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-336-4194
Resilient Mount Adapter

123364194
60165003: RNCC: 3 | RNVC: 2
601 65 003: RNCC: 3 | RNVC: 2
3-91-011: RNCC: 5 | RNVC: 2
60165003: RNCC: 5 | RNVC: 2

14 Nov 1994

5340-12-145-4642
Compression Cup

121454642
TDUOH45-26-BRF: RNCC: 3 | RNVC: 2
6-365-007: RNCC: 5 | RNVC: 2
TDU0H45-26BRF: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-4907
Angle Bracket

123654907
519-120800.41.0: RNCC: 2 | RNVC: 2
519-120800.41.0: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-12-306-8156
Angle Bracket

123068156
25704-282102.00.0: RNCC: 2 | RNVC: 2
84023-11.02.00.0: RNCC: 3 | RNVC: 2
84023-11.02.00.0: RNCC: 5 | RNVC: 9

4 Apr 1986

5340-12-197-5079
Resilient Mount

121975079
2300172-188310.000.0: RNCC: 1 | RNVC: 2
2300172-188310.000.0: RNCC: 3 | RNVC: 2
2300172-188310.000.0: RNCC: 3 | RNVC: 2
2300172-188310.000.0: RNCC: 5 | RNVC: 9

27 Oct 1983

5340-12-386-6858
Manual Control Handle

123866858
DVZ-OMD-2005 ITEM 5: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-12-317-0456
Electronic Equipment Hardware Kit

123170456
ZG 4161 A 002: RNCC: 3 | RNVC: 9

7 Mar 1989

5340-12-193-6086
Catch Strike

121936086
CF 453 259 A: RNCC: 3 | RNVC: 2
CF 453 259 A: RNCC: 5 | RNVC: 2
CF453259A: RNCC: 5 | RNVC: 2
CF 453 259: RNCC: 5 | RNVC: 2
CF453259A: RNCC: 5 | RNVC: 2
CF453259: RNCC: 5 | RNVC: 2

10 Aug 1982

5340-12-363-0528
Mounting Bracket

123630528
946775277: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-305-2704
Flush Lock

123052704
0004629630: RNCC: 3 | RNVC: 9

15 Oct 1985

5340-12-199-6283
Loop Clamp

121996283
1451008101: RNCC: 3 | RNVC: 2

17 May 1984

5340-12-126-5106

5340-12-143-4333
Retaining Strap

121434333
3365184EE0152-01: RNCC: 3 | RNVC: 2
0336 5184: RNCC: 5 | RNVC: 2
0152-01-91.55: RNCC: 5 | RNVC: 2
03365184: RNCC: 5 | RNVC: 2
E0152-01-91-55: RNCC: 5 | RNVC: 2
0152-01-91-55: RNCC: 5 | RNVC: 2
E0152-01-91-55: RNCC: 5 | RNVC: 2
0152-01-91-55: RNCC: 5 | RNVC: 2
3365184EE0152-01: RNCC: 5 | RNVC: 2
3365184: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-2749
Loop Clamp

123182749
DIN3016-1-D2-19-19X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-19-19X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X19/20-W1: RNCC: 3 | RNVC: 2
DIN3016-D2-19-19X20W1-2: RNCC: 5 | RNVC: 2
RSGU1.2X19/20: RNCC: 5 | RNVC: 2
RSGU1.2X19/20W1: RNCC: 5 | RNVC: 2
DIN3016-D2-19-19X20W1-2: RNCC: 5 | RNVC: 2
DIN3016-D2-19-19X20-W1-2: RNCC: 5 | RNVC: 9

26 Jun 1989

5340-12-185-3077
Pipe Bracket

121853077
NO PRIMARY REF 12-185-3077: RNCC: 3 | RNVC: 2
01-4-6917: RNCC: 5 | RNVC: 9
1-6899-01-4-6917: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-166-5643
Mending Plate

121665643
2360-187000.01.0: RNCC: 2 | RNVC: 2
2360-187000.01.0: RNCC: 3 | RNVC: 2
2360-187000.01.0: RNCC: 5 | RNVC: 2
2360-187000-01-0: RNCC: 5 | RNVC: 9
2360-187000.01.0: RNCC: 5 | RNVC: 9

24 Sep 1976

5340-12-189-0594
Nut And Bolt Locking Plate

121890594
2500075-322560.00.0: RNCC: 2 | RNVC: 2
2500075-322560.00.0: RNCC: 3 | RNVC: 2
2500075-322560-00-0: RNCC: 5 | RNVC: 2
2500075-322560.00.0: RNCC: 5 | RNVC: 9
2500075-322560-00-0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-328-2636
Mending Plate

123282636
2300232-206000.016.0: RNCC: 2 | RNVC: 2
2300232-206000.016.0: RNCC: 3 | RNVC: 2
9997001-206000.016.0: RNCC: 5 | RNVC: 2

30 Apr 1992

5340-12-333-8849
Mounting Bracket

123338849
405-6-24-1: RNCC: 3 | RNVC: 2
405-6.24.1: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-196-8750
Mending Plate

121968750
A-243845-001: RNCC: 3 | RNVC: 2
A243845-001: RNCC: 5 | RNVC: 2

29 Aug 1983

5340-12-317-4205
Mounting Bracket

123174205
P-145502-062: RNCC: 3 | RNVC: 2
P145502-062: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-188-0424
Loop Clamp

121880424
DIN3016-2-G1-28X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-28X12-W1-2: RNCC: 3 | RNVC: 2
SP28/12SKZ: RNCC: 3 | RNVC: 2
1310005028: RNCC: 5 | RNVC: 2
SP28-12ZY: RNCC: 5 | RNVC: 2
SP28/12ZY: RNCC: 5 | RNVC: 2
DIN3016-G1-28X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-G28X12-W1: RNCC: 5 | RNVC: 9
VG95931G28X12-W1: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-366-9715
Mounting Bracket

123669715
BD5.250.746.220: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-364-2470
Angle Bracket

123642470
4055450140: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-186-2192
Butt Hinge Leaf

121862192
81658010048: RNCC: 3 | RNVC: 2

6 Dec 1980

5340-12-308-9255
Plug Button

123089255
14 09 559: RNCC: 3 | RNVC: 9

27 Nov 1986

5340-12-044-4233

5340-12-090-6225

5340-12-190-7012
Nonmetallic Bumper

121907012
CF 478 199: RNCC: 3 | RNVC: 2
CF 478 199: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-12-198-5866
Buckle

121985866
1070: RNCC: 3 | RNVC: 2

14 Feb 1984

5340-12-177-2309
Spring Tension Clip

121772309
5800822-15-001: RNCC: 3 | RNVC: 2
5800822-15.001: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-316-7603
Rim Lock

123167603
6188-020251: RNCC: 3 | RNVC: 2
6188 PAB-GCR-HCR-NPI 020251: RNCC: 5 | RNVC: 2

9 Feb 1989

5340-12-347-1260
Dust And Moisture Seal Protective Cap

123471260
255/30: RNCC: 3 | RNVC: 2
GPN255-30: RNCC: 5 | RNVC: 9
255-30: RNCC: 5 | RNVC: 9

29 Oct 1998

5340-12-326-5781
Mounting Plate

123265781
63038-002: RNCC: 3 | RNVC: 2
63 038-002: RNCC: 5 | RNVC: 9

9 Oct 1991

5340-12-186-9337
Mending Plate

121869337
DIN5295-A20ZN: RNCC: 2 | RNVC: 2
9501: RNCC: 3 | RNVC: 2
A20DIN5295ZN: RNCC: 5 | RNVC: 2
DIN5295-A20ZN: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-12-369-5693
Permanent Magnet

123695693
389200-35: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-12-316-2773
Angle Bracket

123162773
0336 0497: RNCC: 3 | RNVC: 2
03360497EE0144-40: RNCC: 5 | RNVC: 2
3360497: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-12-384-9687
Mechanical Stop

123849687
F1.1189-30-30-20.50-00: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-344-4188
Loop Clamp

123444188
51974010471: RNCC: 3 | RNVC: 2
51.97401-0471: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-362-9324
Mounting Bracket

123629324
4603101209: RNCC: 3 | RNVC: 2
S 721 1 31 435 2: RNCC: 5 | RNVC: 9

16 Apr 2004

5340-12-165-7231

5340-12-152-2701

5340-12-163-5062
Loop Clamp

121635062
4039950201: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-134-8974

5340-12-196-7791
Bridge Clamp

121967791
M525060-2: RNCC: 3 | RNVC: 9
M525060-2: RNCC: 5 | RNVC: 2
M250060-2: RNCC: 5 | RNVC: 9
M250060-2: RNCC: 5 | RNVC: 9

16 Aug 1983

5340-12-134-8838

5340-12-306-5836
Angle Bracket

123065836
1121-20501.02: RNCC: 3 | RNVC: 2

12 Mar 1986

5340-12-332-3084
Mounting Bracket

123323084
4605420840: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-190-3218
Mending Plate

121903218
AZ9500T931: RNCC: 2 | RNVC: 2
AZ9500T931: RNCC: 3 | RNVC: 2
AZ9500T931: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-190-2114
Metal Runner

121902114
GE9101G481: RNCC: 3 | RNVC: 2
GE9101G481: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-196-6865
Extension Drawer Slide Section

121966865
52.2031.550.01: RNCC: 3 | RNVC: 2

2 Aug 1983

5340-12-317-9829
Flush Lock

123179829
3307200135: RNCC: 3 | RNVC: 9

31 May 1989

5340-12-182-8277
Loop Clamp

121828277
DIN3016-1-D1-26X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-26X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.26/12: RNCC: 3 | RNVC: 2
26002250520: RNCC: 5 | RNVC: 2
9410012026: RNCC: 5 | RNVC: 2
RSGU1100-26-12: RNCC: 5 | RNVC: 2
RSGU1100.26/12: RNCC: 5 | RNVC: 2
DIN3016-D1-26X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-D26X12-W1: RNCC: 5 | RNVC: 9
VG95931D26X12W1: RNCC: 5 | RNVC: 9

27 Feb 1980

5340-12-700-2990
Lock-Release Lever

127002990
51-200674004: RNCC: 2 | RNVC: 2
2A28/1-30: RNCC: 3 | RNVC: 2
2A28-1-30: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-143-8046
Resilient Mount

121438046
DIN95363-A30X30-NBR55ST: RNCC: 2 | RNVC: 2
31660BSOX5590: RNCC: 5 | RNVC: 2
31660SMX550: RNCC: 5 | RNVC: 2
31660,NBR55ST: RNCC: 5 | RNVC: 2
31660/A-NBR55ST: RNCC: 5 | RNVC: 2
500033-M8X20.NBR55.ST: RNCC: 5 | RNVC: 2
8798990018: RNCC: 5 | RNVC: 9
GP19D2Q: RNCC: 5 | RNVC: 9
VG95363-A30X30-NBR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-7316
Resilient Mount

121917316
0118 709/102-13MN70: RNCC: 3 | RNVC: 2
0118 709/102: RNCC: 5 | RNVC: 2
0118-709-102-13MN70: RNCC: 5 | RNVC: 2
4603335014: RNCC: 5 | RNVC: 2
721 1 42 010 2: RNCC: 5 | RNVC: 9

1 Mar 1982

5340-12-373-6894
Block Clamp

123736894
8801800345: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-12-300-4930
Angle Bracket

123004930
240960: RNCC: 3 | RNVC: 2
240960E88307: RNCC: 5 | RNVC: 9

7 Aug 1984

5340-12-388-8231
Angle Bracket

123888231
601243-621010.02: RNCC: 2 | RNVC: 2
601243-621010.02: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-12-317-9465
Mounting Bracket

123179465
602B198: RNCC: 3 | RNVC: 2

29 May 1989

5340-12-356-4194
Mounting Bracket

123564194
3011R-800000.01: RNCC: 2 | RNVC: 2
3011R-800000.01: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-12-388-0768
Manual Control Handle

123880768
8699970119: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-392-0251
Protection Bellows

123920251
124002-0029: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-12-141-2839
Retaining Strap

121412839
DIN72571-1X10-ST-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN72571-1X10-ST-PHOSPHATIERT: RNCC: 3 | RNVC: 2
1X10DIN72571STPHRE: RNCC: 5 | RNVC: 2
1X10DIN72571STPH0SPHATIERT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-351-2369
Mounting Bracket

123512369
3099-111000.02: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-12-322-5085
Angle Bracket

123225085
2079-111000.10B: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-319-9507
Access Cover

123199507
6100125-11600: RNCC: 2 | RNVC: 2
4110610166: RNCC: 3 | RNVC: 2

21 Nov 1989

5340-12-351-4932
Webbing Strap

123514932
10063-000020: RNCC: 3 | RNVC: 2
10063-000020: RNCC: 5 | RNVC: 9

31 Jul 2000

5340-12-701-8437
Loop Clamp

127018437
VG95211-ML-127018437: RNCC: 2 | RNVC: 2
5149A-25: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-150-3582
Cremone Bolt

121503582
1.66.0133.0: RNCC: 3 | RNVC: 2
2281-1/2 K/3 SCHLIESZUNG 212: RNCC: 5 | RNVC: 2
1.66.133.0: RNCC: 5 | RNVC: 2
1.66.133.0 SCHLIESZUNG 01X: RNCC: 5 | RNVC: 2
2281-1-2K3SCHLIESZUNG212: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-7675
Electrical-Mechanical Equipment Post

123307675
VG95148B10XM6X78-ST: RNCC: 2 | RNVC: 2
TOR-1044-000A0-003: RNCC: 3 | RNVC: 2
TOR-1045-000A0-003: RNCC: 3 | RNVC: 2
9898883: RNCC: 5 | RNVC: 2
BM-TOR-1044-000A0-3: RNCC: 5 | RNVC: 2

5 Feb 1993

5340-12-326-0934
Rod End Clevis

123260934
1865-010540.02.0: RNCC: 3 | RNVC: 9

7 Aug 1991

5340-12-322-8130
Access Cover

123228130
1280505-1.063: RNCC: 3 | RNVC: 2

25 Sep 1990

5340-12-701-6203
Mounting Plate

127016203
VG95211-ML-127016203: RNCC: 2 | RNVC: 2
5.12.7020.1010.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-2097
Mounting Plate

127022097
VG95211-ML-127022097: RNCC: 2 | RNVC: 2
30.7215.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-304-8663
Dust And Moisture Seal Protective Plug

123048663
0241 2817: RNCC: 3 | RNVC: 2
02412817EE0148-01: RNCC: 5 | RNVC: 2

29 Aug 1985

5340-12-385-0652
Bumper

123850652
82960200018: RNCC: 3 | RNVC: 2
82.96020-0018: RNCC: 5 | RNVC: 2

27 Apr 2011

5340-12-385-7830
Padlock

123857830
651B/40: RNCC: 3 | RNVC: 2
4615800084: RNCC: 5 | RNVC: 2
4003318107627: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-12-342-4434
Retaining Strap

123424434
0 2714 090 49: RNCC: 3 | RNVC: 2
0 271 409 049: RNCC: 5 | RNVC: 2
6 2714 090 49: RNCC: 5 | RNVC: 9

12 Feb 1997

5340-12-392-2129
Mechanical Stop

123922129
DW 306 583 B: RNCC: 3 | RNVC: 2
DW 306 583 B: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-326-0777
Handle Grip

123260777
5801984-981117.001.0: RNCC: 2 | RNVC: 2
5801984-981117.001.0: RNCC: 3 | RNVC: 2

6 Aug 1991

5340-12-179-8381
Mounting Plate

121798381
CF 414 669: RNCC: 3 | RNVC: 2
CF 414 669: RNCC: 3 | RNVC: 2
CF414669: RNCC: 5 | RNVC: 2
CF 414 669: RNCC: 5 | RNVC: 2
CF414669: RNCC: 5 | RNVC: 2
CF414669: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-178-7072
Resilient Mount

121787072
5018001-1/2-13UNC/11MN50: RNCC: 3 | RNVC: 2
5018001.50-1-2-13UNC: RNCC: 5 | RNVC: 2
5018001-13-1-2-13UNC: RNCC: 5 | RNVC: 9

14 May 1979

5340-12-320-0442
Compression Cup

123200442
T50-22-JED.BODENLOCH 30MM: RNCC: 3 | RNVC: 2
150-22/30MM: RNCC: 5 | RNVC: 2
T50-22/30MM: RNCC: 5 | RNVC: 2
12152246: RNCC: 5 | RNVC: 2
6-0495-15-0-5022: RNCC: 5 | RNVC: 9
6.0495.15.0.5022: RNCC: 5 | RNVC: 9
1215 2246 EY: RNCC: 5 | RNVC: 9

30 Nov 1989

5340-12-333-8845
Angle Bracket

123338845
405-1-16: RNCC: 3 | RNVC: 2
405-1.16: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-197-7683
Angle Bracket

121977683
A-145401-084: RNCC: 3 | RNVC: 2
A145401-084: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-313-6380
Access Cover

123136380
4062640711: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-183-4841
Clamping Catch

121834841
2513555101: RNCC: 3 | RNVC: 2

22 Apr 1980

5340-12-362-8012
Cushioning Pad

123628012
56890: RNCC: 3 | RNVC: 2
BEACHVOLLEYBALL COVER-GUARD,POLE: RNCC: 5 | RNVC: 2

1 Apr 2004

5340-12-366-8805
Expansion Plug

123668805
5370160133: RNCC: 2 | RNVC: 2
5370160133: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-358-8749
Magnetic Catch

123588749
246.50.708: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-197-5319
Escutcheon Plate

121975319
3228330359: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-187-7793
Retaining Band

121877793
3634551353: RNCC: 3 | RNVC: 2
36345 51353: RNCC: 5 | RNVC: 9

6 May 1981

5340-12-319-7304
Dust And Moisture Seal Protective Cap

123197304
118562: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-12-314-0417
Angle Bracket

123140417
6174291040: RNCC: 3 | RNVC: 2
617 429 10 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-152-2098
Retaining Strap

121522098
DIN72571-1X5-ST-VERZINKT: RNCC: 2 | RNVC: 2
BSL1X5/72571VPE: RNCC: 3 | RNVC: 2
DIN72571-1X5-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72571-1X5-ST-VERZINKT: RNCC: 3 | RNVC: 2
1X5DIN72571STVZK: RNCC: 5 | RNVC: 2
DIN72571-1X5-ST-GALZN8: RNCC: 5 | RNVC: 2
DIN72571-1X5-ST-GALZN8: RNCC: 5 | RNVC: 2
072571001023: RNCC: 5 | RNVC: 2
1X5DIN72571STGALZN8C: RNCC: 5 | RNVC: 2
1X5DIN72571STVERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-345-8815
Mounting Plate

123458815
509-247-024: RNCC: 3 | RNVC: 2

11 May 1998

5340-12-337-3943
Multiple Angle Bracket

123373943
454-250700.012: RNCC: 3 | RNVC: 9
9892674: RNCC: 5 | RNVC: 9

24 Feb 1995

5340-12-186-4975
Angle Bracket

121864975
55-0206-001-05: RNCC: 3 | RNVC: 2

9 Jan 1981

5340-12-345-4856
Mounting Plate

123454856
5802097-11201.001: RNCC: 2 | RNVC: 2
5802097-11201.001: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-12-329-5485
Webbing Strap

123295485
01802-2-01212-FE300MM-LE400MM: RNCC: 3 | RNVC: 2
01802-2-01212-L700MM: RNCC: 5 | RNVC: 2
79036/038-700-300: RNCC: 5 | RNVC: 2
DIN60060-2-25X300X400-C1/D6: RNCC: 5 | RNVC: 9
DIN60060-2-25X300X400-C2/D6: RNCC: 5 | RNVC: 9

28 Aug 1992

5340-12-319-8410
Clamping Catch

123198410
TL-40-203-07: RNCC: 3 | RNVC: 2
335948-3703.000: RNCC: 3 | RNVC: 2
335948-3703.000: RNCC: 5 | RNVC: 2
2913 715 00066: RNCC: 5 | RNVC: 2
TL802B: RNCC: 5 | RNVC: 9
TL802 B-RAL6031F9: RNCC: 5 | RNVC: 9

9 Nov 1989

5340-12-301-6993
Pad Eye

123016993
1000163-990000.001.0: RNCC: 3 | RNVC: 2

3 Nov 1984

5340-12-011-4889

5340-12-199-3030
Electrical-Mechanical Equipment Post

121993030
160-23295-15: RNCC: 3 | RNVC: 2
160-23295.15: RNCC: 5 | RNVC: 2
160-23295-15: RNCC: 5 | RNVC: 2
160-23295.15: RNCC: 5 | RNVC: 9

11 Apr 1984

5340-12-163-9816
Rod End Connector

121639816
2500006-4940.00: RNCC: 2 | RNVC: 2
2500006-4940.00: RNCC: 3 | RNVC: 2
TK6092-4900-01: RNCC: 5 | RNVC: 9
2500006-4900-01: RNCC: 5 | RNVC: 9
2500006-4940: RNCC: 5 | RNVC: 9
2500006-4940.00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-169-7144
Electrical-Mechanical Equipment Post

121697144
535003-2570: RNCC: 3 | RNVC: 2
535003-2570: RNCC: 5 | RNVC: 9
535003-2570.000: RNCC: 5 | RNVC: 9
120003-1640-20: RNCC: 5 | RNVC: 9

3 Jun 1977

5340-12-334-9953
Flush Catch

123349953
VG95528-4ST: RNCC: 2 | RNVC: 2
2817: RNCC: 3 | RNVC: 2
571345477: RNCC: 5 | RNVC: 2

8 Jul 1994

5340-12-169-7588
Retaining Strap

121697588
1400003-12051-00: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-702-6447
Loop Clamp

127026447
VG95211-ML-127026447: RNCC: 2 | RNVC: 2
987S50-28-10-BP: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-142-9973
Manual Control Handle

121429973
DIN99-N125: RNCC: 2 | RNVC: 2
SM35-11-538: RNCC: 5 | RNVC: 2
E20XM16DIN99: RNCC: 5 | RNVC: 2
N125DIN99: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-8919
Electrical-Mechanical Equipment Post

121958919
VG95148A5XM2,5X14-AL-1101: RNCC: 2 | RNVC: 2
1280505-34.004: RNCC: 3 | RNVC: 2
VG95148A5XM2,5X14-AL-1101: RNCC: 3 | RNVC: 2

27 Apr 1983

5340-12-372-2085
Mounting Plate

123722085
J32320170-406: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-331-6118
Turnbuckle

123316118
70.0912.012.0450: RNCC: 3 | RNVC: 2
70-0912-012-0450: RNCC: 5 | RNVC: 9
70.0912.012.0450: RNCC: 5 | RNVC: 9

28 May 1993

5340-12-198-5022
Access Hole Frame

121985022
160-744916-02: RNCC: 3 | RNVC: 2
160-744916-02: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-165-9285
Retaining Clip

121659285
4119190183: RNCC: 3 | RNVC: 2
632010101500: RNCC: 5 | RNVC: 2

15 Jul 1976

5340-12-376-2340
Mounting Bracket

123762340
4615206641: RNCC: 3 | RNVC: 2

29 Aug 2008

5340-12-317-1938
Mending Plate

123171938
M01300041: RNCC: 2 | RNVC: 2
01300041: RNCC: 3 | RNVC: 2
01300041: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-042-2747

5340-12-357-7566
Butt Hinge

123577566
DIN7956-20X0,7-15-ST-NI: RNCC: 2 | RNVC: 2

19 Jul 2002

5340-12-123-4581
Retaining Strap

121234581
51974010025: RNCC: 3 | RNVC: 2
00.00430-5909: RNCC: 5 | RNVC: 2
00004305909: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-3145
Angle Bracket

121993145
2500043-194500.01.0: RNCC: 3 | RNVC: 2
2500043-194500-01-0: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-339-8546
Mounting Bracket

123398546
1.8535-111: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-12-300-9940
Rigid Caster

123009940
1423-320.02(3): RNCC: 3 | RNVC: 2

15 Sep 1984

5340-12-317-3456
Access Cover

123173456
963829314: RNCC: 3 | RNVC: 2
0201-218.00.02.003-0: RNCC: 5 | RNVC: 2

30 Mar 1989

5340-12-377-7518
Retaining Strap

123777518
58R052-651734-1: RNCC: 2 | RNVC: 2
58R052-651734-1: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-12-386-5830
Mounting Bracket

123865830
T251M4020202: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-025-3196

5340-12-314-3742
Webbing Strap

123143742
4357907471: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-12-306-4357
Bow Handle

123064357
10501-011: RNCC: 3 | RNVC: 2
52.1901.000.87: RNCC: 5 | RNVC: 2
V22.917.2-41: RNCC: 5 | RNVC: 2

28 Feb 1986

5340-12-136-5786

5340-12-310-2379
Casement Fastener

123102379
6131623: RNCC: 3 | RNVC: 2

24 Apr 1987

5340-12-700-8787
Loop Clamp

127008787
VG95211-ML-127008787: RNCC: 2 | RNVC: 2
1729S-52-20-T: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-8813
Clamping Catch

121958813
VG95528D140-10: RNCC: 2 | RNVC: 2
2807-2833: RNCC: 3 | RNVC: 2
VG95528D140-10: RNCC: 3 | RNVC: 2
VG95528D140-6-10ST: RNCC: 5 | RNVC: 9

27 Apr 1983

5340-12-343-2928
Mounting Bracket

123432928
9997006-241030.000.0: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-12-158-0281
Loop Clamp

121580281
DIN3016-1-A1-28X20-W1-2: RNCC: 2 | RNVC: 2
RS1.28/20: RNCC: 3 | RNVC: 2
DIN3016-A1-28X20-W1-2: RNCC: 3 | RNVC: 2
RS1100.28/20: RNCC: 5 | RNVC: 2
4110020028: RNCC: 5 | RNVC: 2
RS1100-28-20: RNCC: 5 | RNVC: 2
VG95931-A28X20-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-28X20-W1-2: RNCC: 5 | RNVC: 9
VG95931A28X20W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-394-4965
Blank Panel

123944965
L311M1104051: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-369-5558
Spring Tension Clip

123695558
13711707044: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-12-334-8358
Butt Hinge

123348358
52.3109.824.07: RNCC: 2 | RNVC: 2
52.3109.824.07: RNCC: 3 | RNVC: 2

27 Jun 1994

5340-12-180-8259
Webbing Strap

121808259
R23292: RNCC: 3 | RNVC: 2
R23292: RNCC: 5 | RNVC: 9

5 Oct 1979

5340-12-198-5024
Double Angle Bracket

121985024
160-744967: RNCC: 3 | RNVC: 2
160-744967: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-357-5424
Loop Clamp

123575424
5582422: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-379-6038
Webbing Strap

123796038
601250-202110.00: RNCC: 2 | RNVC: 2
601250-202110.00: RNCC: 3 | RNVC: 2

13 Aug 2009

5340-12-352-6112
Escutcheon Plate

123526112
8352-0006: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-360-4126
Mounting Bracket

123604126
3514462504: RNCC: 3 | RNVC: 2
3514462504: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-359-8487
Dust And Moisture Seal Protective Cap-Plug

123598487
610U8RAL3000: RNCC: 3 | RNVC: 2
610U8ROT: RNCC: 5 | RNVC: 9
GPN610-U8RAL3000: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-044-5085

5340-12-701-4361
Mounting Bracket

127014361
VG95211-ML-127014361: RNCC: 2 | RNVC: 2
5.12.5313.2000.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8071
Mounting Plate

127018071
VG95211-ML-127018071: RNCC: 2 | RNVC: 2
5.12.8700.8210.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-0733
Access Cover

123060733
5801984-200280.006.0: RNCC: 2 | RNVC: 2
5801984-200280.006.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-358-4258
Access Cover

123584258
4000A-310000.023.0: RNCC: 2 | RNVC: 2
4000A-310000.023.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-325-0865
Mounting Plate

123250865
151-271000-000-0: RNCC: 3 | RNVC: 2
3730832KE3138-50: RNCC: 5 | RNVC: 2

30 Apr 1991

5340-12-701-6116
Double Angle Bracket

127016116
VG95211-ML-127016116: RNCC: 2 | RNVC: 2
5.12.7010.1440.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-3326
Mounting Plate

123653326
2500075-195410.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-188-4651
Mounting Bracket

121884651
023-140300-00-0: RNCC: 3 | RNVC: 2

13 Jul 1981

5340-12-175-2883
Double Angle Bracket

121752883
6.6208-0035.1: RNCC: 3 | RNVC: 2
6-6208-0035-1: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-323-8639
Bow Handle

123238639
VG95149A102X28X8ST-CR: RNCC: 2 | RNVC: 2
35.01.9: RNCC: 3 | RNVC: 2
ZBG 1: RNCC: 5 | RNVC: 2

2 Jan 1991

5340-12-320-7342
Angle Bracket

123207342
54.0062.990.03: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-371-3247
Snap Hook

123713247
AFG0118363: RNCC: 3 | RNVC: 2
AFG-07-205-00-00-01: RNCC: 5 | RNVC: 2

15 Mar 2007

5340-12-363-7074
Automatic Closing Fire Door Hardware Kit

123637074
TS73 EMF/EMR 75400134: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-314-5495
Dust And Moisture Seal Protective Cap

123145495
E643-A30X45: RNCC: 3 | RNVC: 2
06.55700-0111: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-320-5989
Strap Hinge Leaf

123205989
100330-2500.12: RNCC: 2 | RNVC: 2
1064848: RNCC: 3 | RNVC: 2
100330-2500.12: RNCC: 5 | RNVC: 9
1064848: RNCC: 5 | RNVC: 9

30 Jan 1990

5340-12-700-8547
Loop Clamp

127008547
VG95211-ML-127008547: RNCC: 2 | RNVC: 2
155N1119-628: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-7229
Metal Runner

121907229
NO PRIMARY REF 12-190-7229: RNCC: 3 | RNVC: 2
7111 123419: RNCC: 5 | RNVC: 9
7111123419: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-315-1411
Access Cover

123151411
C50-00-002: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-12-162-8886

5340-12-351-0373
Angle Bracket

123510373
5.018-272: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-322-3153
Mending Plate

123223153
704-181232-901-0: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-12-169-5259
Electrical-Mechanical Equipment Post

121695259
VG95148A4XM2X12-3.1364: RNCC: 2 | RNVC: 2
VG95148A4XM2X12-3.1364: RNCC: 3 | RNVC: 2
924-45-02-01: RNCC: 3 | RNVC: 2
2924450152: RNCC: 5 | RNVC: 2
924.45.02-01: RNCC: 5 | RNVC: 2

24 May 1977

5340-12-320-6506
Loop Clamp

123206506
DIN3015-LH-3R-20-PP-W1: RNCC: 2 | RNVC: 2
RAPR18-320: RNCC: 3 | RNVC: 2
HRL3D20PP STMBL: RNCC: 3 | RNVC: 2
320PP-SIG-AF: RNCC: 3 | RNVC: 2
DIN3015-LH3R-20PP-W1: RNCC: 5 | RNVC: 2
RAPR18-320: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-331-7307
Strap Fastener Loop

123317307
71047: RNCC: 3 | RNVC: 2
VE 01244: RNCC: 3 | RNVC: 2
VE01244: RNCC: 5 | RNVC: 2
34038-4: RNCC: 5 | RNVC: 2
DIN60060-D2-50MM: RNCC: 5 | RNVC: 9

15 Jun 1993

5340-12-702-4941
Mounting Bracket

127024941
VG95211-ML-127024941: RNCC: 2 | RNVC: 2
5.51.5101.1140.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-306-9553
Resilient Mount

123069553
E1T2569-12: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-12-347-3508
Mounting Plate

123473508
4833.16.14: RNCC: 2 | RNVC: 2
4833.16.14: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-372-1439
Mechanical Stop

123721439
S322I30A1212: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-319-3318
Nonmetallic Bumper

123193318
107040130: RNCC: 3 | RNVC: 2
134176: RNCC: 5 | RNVC: 2
134176: RNCC: 5 | RNVC: 2

25 Sep 1989

5340-12-372-5739
Angle Bracket

123725739
184712406: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-12-323-5089
Nonmetallic Bumper

123235089
DIN3015-S-ELCR-4-48,3: RNCC: 2 | RNVC: 2
HRES4EE48,3: RNCC: 3 | RNVC: 2
RI6048,3: RNCC: 3 | RNVC: 2
EG-C448,3: RNCC: 3 | RNVC: 2
EG-C448,3: RNCC: 5 | RNVC: 2
DIN3015-S-EL-4-48,3: RNCC: 5 | RNVC: 2
DIN3015-SEL4-48,3: RNCC: 5 | RNVC: 2
1611578: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-373-0820
Loop Clamp

123730820
DIN3016-1-D1-25X15-W5-CR: RNCC: 2 | RNVC: 2
RSGU1.25/15-W5: RNCC: 3 | RNVC: 2
DKAI034: RNCC: 5 | RNVC: 2

25 Sep 2007

5340-12-371-9094
Mounting Bracket

123719094
1506278: RNCC: 3 | RNVC: 2
548-060200.08.0: RNCC: 5 | RNVC: 2
15015077: RNCC: 5 | RNVC: 2

29 May 2007

5340-12-316-1919
Mounting Bracket

123161919
4604300310: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-371-6158
Pad Eye

123716158
23302-181750.00: RNCC: 2 | RNVC: 2
2660464: RNCC: 5 | RNVC: 2

26 Apr 2007

5340-12-701-2551
Lock-Release Lever

127012551
VG95211-ML-127012551: RNCC: 2 | RNVC: 2
5.12.4003.0021.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-389-8626
Spring Loaded Cylinder Fastener

123898626
GN 612.2-6-16-B: RNCC: 3 | RNVC: 2
1310486: RNCC: 5 | RNVC: 2

6 Sep 2012

5340-12-191-5866
Loop Clamp

121915866
PAN6636B20: RNCC: 3 | RNVC: 2

15 Feb 1982

5340-12-386-8340
Cremone Bolt

123868340
58070900: RNCC: 3 | RNVC: 2
CV192095: RNCC: 5 | RNVC: 2
58070900: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-339-1456
Double Angle Bracket

123391456
3662030040: RNCC: 3 | RNVC: 2

17 Oct 1995

5340-12-393-7223
Dust And Moisture Seal Protective Cover

123937223
F8547028622200: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-195-3747
Lock-Release Lever

121953747
2500125-211500.00: RNCC: 2 | RNVC: 2
2500125-211500.00: RNCC: 3 | RNVC: 2
2500125-211500.00: RNCC: 3 | RNVC: 2
2500125-211500-00: RNCC: 5 | RNVC: 2
2500125-211500-00: RNCC: 5 | RNVC: 9
2500125-211500.00: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-12-133-2961
Line Supporting Strap

121332961
8HL 076 671-00: RNCC: 3 | RNVC: 2
160X7AL: RNCC: 5 | RNVC: 2
160X7FE: RNCC: 5 | RNVC: 2
076671-00: RNCC: 5 | RNVC: 2
MF02-59: RNCC: 5 | RNVC: 9
8HL076671-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-341-5326
Mounting Bracket

123415326
227802-2000: RNCC: 3 | RNVC: 2
2278022000: RNCC: 5 | RNVC: 2

17 Sep 1996

5340-12-178-7891
Mending Plate

121787891
1121-45021.75: RNCC: 3 | RNVC: 2
1121-45021-75: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-171-4604
Nonmetallic Bumper

121714604
42223-510.01: RNCC: 2 | RNVC: 2
42223-510-01: RNCC: 3 | RNVC: 2
42223-510-01: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-390-2759
Loop Clamp

123902759
DIN3016-D1-22X15-W4-CR: RNCC: 2 | RNVC: 2
RSGU 1.22/15-W4: RNCC: 3 | RNVC: 2
RSGU 1-22/15-W4: RNCC: 5 | RNVC: 2
SPP4510006: RNCC: 5 | RNVC: 2

24 Oct 2012

5340-12-329-0584
Resilient Mount

123290584
DIN95363-E40X25-M10X20-NR45ST: RNCC: 2 | RNVC: 2
515015-M10X20.NR45.ST: RNCC: 5 | RNVC: 2
BK5.40/24N: RNCC: 5 | RNVC: 9
VG95363-E40X25-M10X20-NR45ST: RNCC: 5 | RNVC: 9

15 Jul 1992

5340-12-310-3685
Mending Plate

123103685
5801758-0700.11: RNCC: 2 | RNVC: 2
5801758-0700.11: RNCC: 3 | RNVC: 2

15 May 1987

5340-12-357-8447
Angle Bracket

123578447
5400051-332000.07: RNCC: 2 | RNVC: 2
5400051-332000.07: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-338-1340
Access Cover

123381340
160-74963-962: RNCC: 3 | RNVC: 2
15160-74963-962: RNCC: 5 | RNVC: 2
160-74963-962: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-146-8750
Loop Clamp

121468750
18C: RNCC: 3 | RNVC: 2
211-15180: RNCC: 5 | RNVC: 2
25704-350000T185: RNCC: 5 | RNVC: 2
202015901: RNCC: 5 | RNVC: 9
25704-350000T185: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-1037
Loop Clamp

123201037
C195-A101-C172: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-341-5792
Nonmetallic Bumper

123415792
DIN95364-A50X28-M10X28-NR55NMST: RNCC: 2 | RNVC: 2
530056-M10X28.NR55.AMST: RNCC: 5 | RNVC: 2
VG95364-A50X28-M10X28-NR55AMST: RNCC: 5 | RNVC: 9

24 Sep 1996

5340-12-157-4478
Angle Bracket

121574478
51-2404-100-36: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-351-2245
Angle Bracket

123512245
2500113-2100.20: RNCC: 2 | RNVC: 2
2500113-2100.20: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-381-7633
Webbing Strap

123817633
7111984: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-12-324-4023
Dust And Moisture Seal Protective Plug

123244023
H20: RNCC: 3 | RNVC: 2
56498619: RNCC: 5 | RNVC: 2

13 Feb 1991

5340-12-348-1592
Angle Bracket

123481592
7731415: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-12-198-7252
Rod End Clevis

121987252
27 0319 158: RNCC: 2 | RNVC: 2
9849632: RNCC: 3 | RNVC: 2
9849632: RNCC: 5 | RNVC: 9
27 0319 158: RNCC: 5 | RNVC: 9
270319158: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-094-5521

5340-12-040-4548

5340-12-308-2924
Mending Plate

123082924
P-875311-001: RNCC: 3 | RNVC: 2
P875311-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-189-3067
Resilient Mount

121893067
E1FH 2500-01: RNCC: 3 | RNVC: 2
E1FH2500-01: RNCC: 5 | RNVC: 2
27331A: RNCC: 5 | RNVC: 2

17 Sep 1981

5340-12-366-5064
Mounting Bracket

123665064
2 0072-064: RNCC: 3 | RNVC: 2
2 0072-064: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-378-0563
Spacing Threaded Standoff

123780563
41269031: RNCC: 3 | RNVC: 2
IM057.07.04-0: RNCC: 5 | RNVC: 2

10 Mar 2009

5340-12-347-2219
Mending Plate

123472219
1216 1574: RNCC: 3 | RNVC: 2
6.232.0.650.093.4: RNCC: 5 | RNVC: 9

13 Nov 1998

5340-12-307-3682
Retaining Strap

123073682
4745997: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-183-5458
Retaining Strap

121835458
CF437792: RNCC: 3 | RNVC: 2
CF 437 792: RNCC: 5 | RNVC: 2
CF437792: RNCC: 5 | RNVC: 2
CF 437 792: RNCC: 5 | RNVC: 2
CF437792: RNCC: 5 | RNVC: 2
CF 437 792: RNCC: 5 | RNVC: 2

26 Apr 1980

5340-12-356-5266
Loop Clamp

123565266
8801401341: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-163-9481
Nonmetallic Bumper

121639481
330804820: RNCC: 3 | RNVC: 2
330804820: RNCC: 3 | RNVC: 2
04820: RNCC: 5 | RNVC: 2
330804820: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-312-4398
Nonmetallic Bumper

123124398
8975307904: RNCC: 3 | RNVC: 2
81960020366: RNCC: 5 | RNVC: 2

7 Jan 1988

5340-12-176-2598
Catch Strike

121762598
183847531A: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-393-4101
Nut And Bolt Locking Plate

123934101
7131295: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-323-8393
Electrical-Mechanical Equipment Post

123238393
479743: RNCC: 2 | RNVC: 2
479743: RNCC: 3 | RNVC: 2
479743: RNCC: 5 | RNVC: 2
479743: RNCC: 5 | RNVC: 9

21 Dec 1990

5340-12-153-6266
Mending Plate

121536266
100355-412300.01: RNCC: 2 | RNVC: 2
100355-412300.01: RNCC: 3 | RNVC: 2
100355-412300-01: RNCC: 5 | RNVC: 9
100355-412300.01: RNCC: 5 | RNVC: 9
100355-412300-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-3625
Multiple Angle Bracket

123313625
200431: RNCC: 3 | RNVC: 2
24K03-0084-00.H03: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-12-315-8784
Nonmetallic Bumper

123158784
5019R-1220: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-12-311-6177
Rod End Clevis

123116177
23303-149500.00: RNCC: 2 | RNVC: 2
619-22.12.800-02: RNCC: 3 | RNVC: 2
23303-149500.00: RNCC: 5 | RNVC: 9

28 Sep 1987

5340-12-356-6221
Mending Plate

123566221
2125-125120.16B: RNCC: 2 | RNVC: 2
2125-125120.16B: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-701-5067
Retaining Bail

127015067
VG95211-ML-127015067: RNCC: 2 | RNVC: 2
5.12.5850.8007.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-387-0607
Cover Strip

123870607
010414: RNCC: 3 | RNVC: 2

2 Nov 2011

5340-12-392-8911
Mounting Plate

123928911
2322064000: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-326-8957
Mounting Plate

123268957
62211244055: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-359-8900
Strap Hinge

123598900
351.01.510: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-12-308-1387
Retaining Strap

123081387
4016080089: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-162-4151
Casement Fastener

121624151
KT032-6840: RNCC: 3 | RNVC: 2
032-6840-00: RNCC: 5 | RNVC: 2
KAF20343: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-128-8400
Resilient Mount

121288400
845-A26.13819/7.4: RNCC: 3 | RNVC: 2
A26.13819/7.4: RNCC: 5 | RNVC: 2
1201 8724: RNCC: 5 | RNVC: 2
12018724: RNCC: 5 | RNVC: 2
A26-13819-7-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-4570
Mounting Bracket

127014570
VG95211-ML-127014570: RNCC: 2 | RNVC: 2
5.12.5314.1030.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-123-4513
Compression Cup

121234513
AN53 202: RNCC: 3 | RNVC: 2
211E6738-7: RNCC: 5 | RNVC: 2
81.50425-0010: RNCC: 5 | RNVC: 2
81504250010: RNCC: 5 | RNVC: 2
EW26-15: RNCC: 5 | RNVC: 2
26-15: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-8484
Dust And Moisture Seal Protective Cap-Plug

123598484
610U40RAL3000: RNCC: 3 | RNVC: 2
GPN610-U40RAL3000: RNCC: 5 | RNVC: 9
610U40ROT: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-378-4257
Buckle

123784257
P20595: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-388-4465
Section Block Clamp

123884465
5849953668: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-379-6215
Butt Hinge

123796215
530136: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-12-356-7068
Block Clamp

123567068
64453011: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-332-6752
Bow Handle

123326752
BD4080G262: RNCC: 3 | RNVC: 2
BD4080G262: RNCC: 5 | RNVC: 9

3 Sep 1993

5340-12-352-0547
Mounting Bracket

123520547
C39165-A7010-342-1-6: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-322-5568
Pipe Bracket

123225568
ST01092G1: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-176-1707
Webbing Strap

121761707
5801435-503100.00: RNCC: 2 | RNVC: 2
5801435-503100-00: RNCC: 3 | RNVC: 2
5801435-503100.00: RNCC: 3 | RNVC: 2
5801435-503100-00: RNCC: 5 | RNVC: 9
5801435-503100.00: RNCC: 5 | RNVC: 9
5801435-503100.00: RNCC: 5 | RNVC: 9
000-A3-25X2,5X270-BW-RAL6031: RNCC: 6 | RNVC: 9

9 Nov 1978

5340-12-340-6559
Resilient Mount

123406559
DIN95363-B50X45-NR50ST: RNCC: 2 | RNVC: 2
510039-M10X25-NR50.ST: RNCC: 5 | RNVC: 2
R11: RNCC: 5 | RNVC: 2
VG95363-B50X45-NR50ST: RNCC: 5 | RNVC: 9

21 May 1996

5340-12-346-1890
Mounting Plate

123461890
88669150004: RNCC: 3 | RNVC: 2
88.66915-0004: RNCC: 5 | RNVC: 2
A00V2080210005: RNCC: 5 | RNVC: 2
WRYUG2239: RNCC: 5 | RNVC: 2

24 Jun 1998

5340-12-362-7208
Mounting Bracket

123627208
160-73019-01: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-323-7773
Resilient Mount

123237773
HB44-CBM10-D: RNCC: 3 | RNVC: 2
C22300-Z3300-C14: RNCC: 5 | RNVC: 2
HB44-CBM10-D: RNCC: 5 | RNVC: 9

18 Dec 1990

5340-12-393-0223
Mending Plate

123930223
1030105-206510.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-318-9023
Support Hook

123189023
3516.998.4: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-12-339-7912
Dust And Moisture Seal Boot

123397912
00.4.187.0004: RNCC: 2 | RNVC: 2
SP02847: RNCC: 3 | RNVC: 2
00.4.187.0004: RNCC: 5 | RNVC: 9

18 Jan 1996

5340-12-122-4941
Loop Clamp

121224941
1869950944: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-306-6284
Mending Plate

123066284
84174: RNCC: 3 | RNVC: 2

17 Mar 1986

5340-12-379-2806
Angle Bracket

123792806
0069310: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-12-353-2180
Access Hole Frame

123532180
3.050-043.0: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-12-353-9565
Mortise Latch

123539565
VG95211-ML-123539565: RNCC: 2 | RNVC: 2
JN0096-1: RNCC: 3 | RNVC: 2

22 May 2001

5340-12-136-9468
Mortise Bolt

121369468
3ST2024-4000-1: RNCC: 3 | RNVC: 2
0646-005: RNCC: 5 | RNVC: 2
0646005: RNCC: 5 | RNVC: 2
8434715: RNCC: 5 | RNVC: 2
6025: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-338-4083
Spring Loaded Cylinder Fastener

123384083
NO PRIMARY REF 12-338-4083: RNCC: 3 | RNVC: 2
704208877: RNCC: 5 | RNVC: 2
S 1514 HN: RNCC: 5 | RNVC: 9

4 Jul 1995

5340-12-390-1527
Lock-Release Lever

123901527
2300559-183234.000.0: RNCC: 2 | RNVC: 2
2300559-183234.000.0: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-12-312-9795
Webbing Strap

123129795
2500211-404000.00: RNCC: 2 | RNVC: 2
2500211-404000.00: RNCC: 3 | RNVC: 2
200.3096/4: RNCC: 3 | RNVC: 2
000-F1-19X2,0X270-BW-RAL6031: RNCC: 6 | RNVC: 9

24 Feb 1988

5340-12-010-9848

5340-12-360-0467
Mounting Bracket

123600467
9416881214: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-361-4934
Mounting Bracket

123614934
1504292: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-193-4536
Dust And Moisture Seal Protective Cap

121934536
01TC30516: RNCC: 3 | RNVC: 2

22 Jul 1982

5340-12-374-2670
Access Cover

123742670
3132202: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-12-374-4090
Quick Release Plunger

123744090
5548097: RNCC: 2 | RNVC: 2
5548097: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-12-191-5368
Loop Clamp

121915368
PAN4286-25: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-12-370-8394
Lock Bolt

123708394
3102-0005: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-12-151-3003
Retaining Strap

121513003
5800358-110000-14: RNCC: 3 | RNVC: 2
5800358-110000-14: RNCC: 5 | RNVC: 9
5800358-110000.14: RNCC: 5 | RNVC: 9
5800358-110000-14: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-3070
Angle Bracket

121903070
128753: RNCC: 3 | RNVC: 2
1246-51.2: RNCC: 5 | RNVC: 9
1246-51-2: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-700-9380
Loop Clamp

127009380
VG95211-ML-127009380: RNCC: 2 | RNVC: 2
2272A-8-3: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-1917
Metal Grille

123491917
9005569 987: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-158-1703
Plain Solid Disk

121581703
107074507: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-181-4550

5340-12-339-5525
Retaining Strap

123395525
DIN3016-1-F1-45X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU2.45/20-W1: RNCC: 3 | RNVC: 2
DIN3016-F1-45X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1200.45/20: RNCC: 5 | RNVC: 2
RSGU2.45/20: RNCC: 5 | RNVC: 2
DIN3016-F1-45X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-F45X20-W1: RNCC: 5 | RNVC: 9

5 Dec 1995

5340-12-198-4111
Angle Bracket

121984111
2500135-191660.002.0: RNCC: 2 | RNVC: 2
2500135-191660.002.0: RNCC: 3 | RNVC: 2

25 Jan 1984

5340-12-701-1416
Mounting Plate

127011416
VG95211-ML-127011416: RNCC: 2 | RNVC: 2
5.12.0100.8410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6534
Angle Bracket

127016534
VG95211-ML-127016534: RNCC: 2 | RNVC: 2
5.12.7207.1202.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-369-5213
Angle Bracket

123695213
5062031040: RNCC: 3 | RNVC: 2
0902914KB: RNCC: 5 | RNVC: 2

17 Jul 2006

5340-12-010-8512

5340-12-317-1011
Nonmetallic Bumper

123171011
200.753: RNCC: 3 | RNVC: 2

10 Mar 1989

5340-12-131-5578

5340-12-163-3421
Helical Compression Spring Seat

121633421
3420120001: RNCC: 3 | RNVC: 2
WMS2218-504X: RNCC: 5 | RNVC: 2
0003015092: RNCC: 5 | RNVC: 2
0003015092: RNCC: 5 | RNVC: 9
3015092: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-1903
Mounting Plate

127021903
VG95211-ML-127021903: RNCC: 2 | RNVC: 2
30.7209.325: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-7323
Angle Bracket

127027323
40-13706652382: RNCC: 2 | RNVC: 2

8 Dec 1995

5340-12-189-1882
Dust And Moisture Seal Protective Plug

121891882
D10S12: RNCC: 3 | RNVC: 2
D10S12: RNCC: 3 | RNVC: 2
37 024-003: RNCC: 5 | RNVC: 2
5L.4593.013.59: RNCC: 5 | RNVC: 2
37024-003: RNCC: 5 | RNVC: 2
37024-012: RNCC: 5 | RNVC: 2

9 Sep 1981

5340-12-177-3326
Electrical-Mechanical Equipment Post

121773326
VG95148B7XM3X15-AL: RNCC: 2 | RNVC: 2
5800822-15-003: RNCC: 3 | RNVC: 2
VG95148B7XM3X15-AL: RNCC: 3 | RNVC: 2
5800822-15.003: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-307-3557
Butt Hinge

123073557
790-51.10.114-02: RNCC: 3 | RNVC: 2

9 Jun 1986

5340-12-328-9417
Expansion Plug

123289417
DIN470-60-ST-A3P: RNCC: 2 | RNVC: 2
3.3330-0460.1: RNCC: 3 | RNVC: 2
3.3330-0460.1.6: RNCC: 5 | RNVC: 2
000 421 09 76: RNCC: 5 | RNVC: 2
0004210976: RNCC: 5 | RNVC: 2
60DIN470VERZINKT: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-333-9431
Resilient Mount

123339431
DIN95363-A18X8,5-M6X11-NR70ST: RNCC: 2 | RNVC: 2
500019-M6X11.NR70.ST: RNCC: 5 | RNVC: 2
781040S1HART: RNCC: 5 | RNVC: 2
VG95363-A18X8,5-M6X11-NR70ST: RNCC: 5 | RNVC: 9

24 Feb 1994

5340-12-329-5488
Webbing Strap

123295488
01801-2-01414-FE300MM-LE700MM: RNCC: 3 | RNVC: 2
01801-2-01414-L1000MM: RNCC: 5 | RNVC: 2

28 Aug 1992

5340-12-310-1340
Access Cover

123101340
2-014-11/14000: RNCC: 3 | RNVC: 2
2-014-11-14000: RNCC: 5 | RNVC: 2
2-014-11-14000: RNCC: 5 | RNVC: 9
2-014-11/14000: RNCC: 5 | RNVC: 9

9 Apr 1987

5340-12-331-6261
Turnbuckle

123316261
DIN1480-SPM6-OESE/OESE-1.4571MUT: RNCC: 2 | RNVC: 2
4100006-1.4571 MIT MUTTERN: RNCC: 3 | RNVC: 2

1 Jun 1993

5340-12-385-5814
Loop Clamp

123855814
X00037987: RNCC: 3 | RNVC: 2

17 Jun 2011

5340-12-354-3081
Mounting Bracket

123543081
5NT2391104: RNCC: 3 | RNVC: 2
HH/4NT2391104-B: RNCC: 5 | RNVC: 2

29 Jun 2001

5340-12-321-3791
Loop Clamp

123213791
1212 6630: RNCC: 3 | RNVC: 2
31.1776-04.4: RNCC: 5 | RNVC: 2

11 May 1990

5340-12-184-4811
Mending Plate

121844811
F01-212110-06-0: RNCC: 3 | RNVC: 2

29 Jul 1980

5340-12-311-2497
Angle Bracket

123112497
P-244512-753: RNCC: 3 | RNVC: 2
P244512-753: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-12-311-8666
Access Cover

123118666
X11.05588-2010: RNCC: 3 | RNVC: 2
4D10008: RNCC: 5 | RNVC: 2

26 Oct 1987

5340-12-373-0770
Lock-Release Lever

123730770
2162482000: RNCC: 3 | RNVC: 2
216248-2000: RNCC: 5 | RNVC: 2

24 Sep 2007

5340-12-310-0041
Retaining Strap

123100041
177M56005: RNCC: 3 | RNVC: 2

27 Mar 1987

Load More Results