What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 52 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 52 of 178

5340-12-302-2574
Retaining Strap

123022574
6204920540: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-354-4064
Lock Key

123544064
M01198: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-360-1539
Mounting Bracket

123601539
9425208041: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-360-0030
Mounting Bracket

123600030
9414304457: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-179-7749
Webbing Strap

121797749
4258600694: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-359-7992
Manual Control Lever

123597992
81955400025: RNCC: 3 | RNVC: 2
208799: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-180-6671
Nonmetallic Bumper

121806671
0287 7762: RNCC: 3 | RNVC: 2
2877762: RNCC: 5 | RNVC: 2
2877762EE0704-79: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-184-0181
Double Angle Bracket

121840181
03435848: RNCC: 3 | RNVC: 2
3435848ED5037-55: RNCC: 5 | RNVC: 2

12 Jun 1980

5340-12-342-5366
Mounting Plate

123425366
4068 301 358: RNCC: 3 | RNVC: 2
4068301358: RNCC: 5 | RNVC: 2

25 Feb 1997

5340-12-362-0759
Expansion Plug

123620759
0630 361 048: RNCC: 3 | RNVC: 2
0630361048: RNCC: 5 | RNVC: 9

6 Jan 2004

5340-12-361-9883
Dust And Moisture Seal Protective Cap-Plug

123619883
63 6040 832 067: RNCC: 3 | RNVC: 2

12 Dec 2003

5340-12-309-8763
Retaining Band

123098763
03000809: RNCC: 3 | RNVC: 2

13 Mar 1987

5340-12-181-6264
Dust And Moisture Seal Protective Cap

121816264
41700E1020: RNCC: 3 | RNVC: 2
41700E1020: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-310-8860
Double Angle Bracket

123108860
03591300: RNCC: 3 | RNVC: 2

6 Jul 1987

5340-12-392-6536
Mounting Bracket

123926536
0315362: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-197-0943
Nonmetallic Bumper

121970943
4358537023: RNCC: 3 | RNVC: 2

19 Sep 1983

5340-12-178-0444
Nonmetallic Bumper

121780444
3855410236: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-12-379-5544
Spring Tension Clip

123795544
S259M8057218: RNCC: 3 | RNVC: 2

7 Aug 2009

5340-12-322-0133
Mounting Plate

123220133
027032505: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-313-8681
Angle Bracket

123138681
6205462143: RNCC: 3 | RNVC: 2
620 546 21 43: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-309-7845
Rim Lock

123097845
600B780: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-385-9413
Mortise Lock

123859413
210.40.600: RNCC: 3 | RNVC: 2

25 Jul 2011

5340-12-196-7681
Bridge Clamp

121967681
4213221409: RNCC: 3 | RNVC: 2

15 Aug 1983

5340-12-360-0628
Handle Grip

123600628
9418100754: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-12-360-0081
Mounting Bracket

123600081
9415426440: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-177-6999
Manual Control Handle

121776999
1000086-101232: RNCC: 2 | RNVC: 2
1000086-101232: RNCC: 5 | RNVC: 2
1000086-101232: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-310-3848
Mending Plate

123103848
2300227-300000.021: RNCC: 2 | RNVC: 2
2300227-300000.021: RNCC: 3 | RNVC: 2

18 May 1987

5340-12-303-5777
Electrical-Mechanical Equipment Post

123035777
52.0261.901.04: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-359-0511
Manual Control Lever

123590511
0008353943: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-010-8515

5340-12-372-0530
Mounting Bracket

123720530
15004032: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-348-8608
Angle Bracket

123488608
6205242940: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-387-8511
Mounting Bracket

123878511
7094048: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-315-4057
Turnbuckle

123154057
BF4: RNCC: 3 | RNVC: 2
08-50: RNCC: 5 | RNVC: 2

19 Oct 1988

5340-12-380-9881
Bail Handle

123809881
GN425.2-120-NI: RNCC: 3 | RNVC: 2

18 Dec 2009

5340-12-321-8959
Loop Clamp

123218959
DIN3016-1-A1-5X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-5X9-W1-2: RNCC: 3 | RNVC: 2
RS1.5/9-W1: RNCC: 3 | RNVC: 2
RS1.5/9: RNCC: 5 | RNVC: 2
RS1100.5/9: RNCC: 5 | RNVC: 2
DIN3016-A1-5X9-W1-2: RNCC: 5 | RNVC: 9

6 Jul 1990

5340-12-306-0780
Mending Plate

123060780
P-026602-007: RNCC: 3 | RNVC: 2
P026602-007: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-335-2606
Mounting Bracket

123352606
2500255-197700.000.0: RNCC: 2 | RNVC: 2
2500255-197700.000.0: RNCC: 3 | RNVC: 2
2500255-197700-000-0: RNCC: 5 | RNVC: 2

1 Aug 1994

5340-12-149-0198
Compression Cup

121490198
H40-5-BRF-88NBR/101: RNCC: 3 | RNVC: 2
H40-5BRF: RNCC: 5 | RNVC: 2
H40-5BRF88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-0502
Resilient Mount

123180502
DIN95363-E30X25-M8X12-NR55ST: RNCC: 2 | RNVC: 2
81170-30X25-M8X12.NR55.ST: RNCC: 5 | RNVC: 2
23176-262000.12.0: RNCC: 5 | RNVC: 2
VG95363-E30X25-M8X12-NR55ST: RNCC: 5 | RNVC: 9
23176-262000.12.0: RNCC: 5 | RNVC: 9

7 Jun 1989

5340-12-388-9606
Retaining Strap

123889606
85974010003: RNCC: 3 | RNVC: 2
85.97401-0003: RNCC: 5 | RNVC: 2

10 May 2012

5340-12-186-0634
Electrical-Mechanical Equipment Post

121860634
VG95148A4XM2X7,3-NRST: RNCC: 2 | RNVC: 2
VG95148A4XM2X7,3-NRST: RNCC: 3 | RNVC: 2
31023-001: RNCC: 3 | RNVC: 2
31 023-001: RNCC: 5 | RNVC: 9

27 Nov 1980

5340-12-351-4503
Handwheel

123514503
J95220006-001: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-12-388-8679
Webbing Strap

123888679
2300365-188353.000: RNCC: 2 | RNVC: 2
2300365-188353.000: RNCC: 3 | RNVC: 2
9939693: RNCC: 3 | RNVC: 9

2 May 2012

5340-12-146-4330
Bow Handle

121464330
116-001-417: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-354-8236
Clamping Catch

123548236
9997010-016101.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-164-5758
Butt Hinge Leaf

121645758
730024-20.12: RNCC: 2 | RNVC: 2
730024-20-12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-5795
Retaining Strap

123265795
2300232-033110.000.0: RNCC: 2 | RNVC: 2
2300232-033110.000.0: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-12-197-3659
Webbing Strap

121973659
1249-08: RNCC: 2 | RNVC: 2

17 Oct 1983

5340-12-190-7194
Extension Drawer Slide Section

121907194
NO PRIMARY REF 12-190-7194: RNCC: 3 | RNVC: 2
6935 132726: RNCC: 5 | RNVC: 9
6935132726: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-150-6286
Rod End Connector

121506286
B10LN29605: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-370-6352
Spring Tension Clip

123706352
AH30694P01: RNCC: 3 | RNVC: 2

4 Dec 2006

5340-12-196-7790
Bridge Clamp

121967790
M525060-1: RNCC: 3 | RNVC: 9
M525060-1: RNCC: 5 | RNVC: 2

16 Aug 1983

5340-12-320-4323
Electrical-Mechanical Equipment Post

123204323
SP06585: RNCC: 3 | RNVC: 2
50.4.076.0001: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-301-1979
Nonmetallic Bumper

123011979
1301-918.44(5): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-379-8475
Nut And Bolt Locking Plate

123798475
120D080000.017.0: RNCC: 2 | RNVC: 2
120D080000.017.0: RNCC: 3 | RNVC: 2
1316040: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-300-8189
Angle Bracket

123008189
1423-910.33(4): RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-371-4087
Manual Control Lever

123714087
48635: RNCC: 3 | RNVC: 2
4-8635: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-12-164-5105

5340-12-353-2100
Catch Strike

123532100
54.0084.618.06: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-183-1181
Pipe Hanger Extension Bar

121831181
0288 8328: RNCC: 3 | RNVC: 2
2888328EE0693-79: RNCC: 5 | RNVC: 2
2888328: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-192-1321
Pad Eye

121921321
03465800: RNCC: 3 | RNVC: 2

24 Mar 1982

5340-12-182-3553
Dust And Moisture Seal Protective Cap

121823553
240299: RNCC: 3 | RNVC: 2
240299: RNCC: 5 | RNVC: 2

28 Jan 1980

5340-12-302-8249
Angle Bracket

123028249
472.832: RNCC: 3 | RNVC: 2
439.088: RNCC: 5 | RNVC: 2
D2346-0000-1002: RNCC: 5 | RNVC: 2
2015454140: RNCC: 5 | RNVC: 2

4 Feb 1985

5340-12-356-0197
Elastic Strap

123560197
J0423059H521-002A0-023: RNCC: 3 | RNVC: 2

15 Jan 2002

5340-12-319-3848
Mending Plate

123193848
C105-A12-C39: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-169-4360
Loop Clamp

121694360
PAN4263-50: RNCC: 3 | RNVC: 2

18 May 1977

5340-12-371-3010
Mechanical Stop

123713010
8350-0233: RNCC: 2 | RNVC: 2
8350-0233: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-12-163-0912
Retaining Strap

121630912
14021-17015-00: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-343-9870
Access Cover

123439870
330206-1306.000: RNCC: 3 | RNVC: 2
330206-1306.000: RNCC: 5 | RNVC: 9

22 Aug 1997

5340-12-153-6343
Nut And Bolt Locking Plate

121536343
100355-413000.11: RNCC: 2 | RNVC: 2
100355-413000.11: RNCC: 3 | RNVC: 2
100355-413000-11: RNCC: 5 | RNVC: 9
100355-413000-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-157-8675
Dust And Moisture Seal Protective Cap-Plug

121578675
610U19: RNCC: 3 | RNVC: 2
GPN610U19: RNCC: 5 | RNVC: 2
610001900: RNCC: 5 | RNVC: 9
GPN610,U19: RNCC: 5 | RNVC: 9
U19: RNCC: 5 | RNVC: 9
U19GPN610: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-9170
Clamping Catch

123489170
13972: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-321-3387
Dust And Moisture Seal Protective Plug

123213387
056129777: RNCC: 3 | RNVC: 2

7 May 1990

5340-12-328-6609
Filler Opening Cap

123286609
281201551A: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-313-8674
Mounting Bracket

123138674
4255400018: RNCC: 3 | RNVC: 2
425 540 00 18: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-090-2122

5340-12-175-3552

5340-12-313-3259
Helical Compression Spring Seat

123133259
611 2915 003: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-183-9344
Casement Fastener

121839344
6020272: RNCC: 3 | RNVC: 2
5L.3743.001.34: RNCC: 5 | RNVC: 2

3 Jun 1980

5340-12-192-5856
Friction Catch Stud Receptacle

121925856
437559702: RNCC: 3 | RNVC: 2
437.5597.02: RNCC: 5 | RNVC: 2
437.5600: RNCC: 5 | RNVC: 9
437.5616: RNCC: 5 | RNVC: 9

6 May 1982

5340-12-190-2996
Helical Compression Spring Retainer

121902996
1420521032: RNCC: 3 | RNVC: 2
0128 8624: RNCC: 5 | RNVC: 2
81115360001: RNCC: 5 | RNVC: 2

17 Nov 1981

5340-12-310-9754
Retaining Strap

123109754
03756800: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-380-2563
Access Cover

123802563
110389: RNCC: 3 | RNVC: 2

12 Oct 2009

5340-12-199-2308
Retaining Strap

121992308
114M80008: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-12-179-6788
Nonmetallic Bumper

121796788
3812910186: RNCC: 3 | RNVC: 2

18 Jul 1979

5340-12-305-2853
Dust And Moisture Seal Protective Plug

123052853
9,5N15042: RNCC: 3 | RNVC: 2
9-5N15042: RNCC: 5 | RNVC: 2
915042009001: RNCC: 5 | RNVC: 2

17 Oct 1985

5340-12-703-2059
Mounting Bracket

127032059
VG95211-ML-127032059: RNCC: 2 | RNVC: 2
5.12.5313.2021.02: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-311-2768
Access Door

123112768
60661-625: RNCC: 3 | RNVC: 2
KB-60661-625: RNCC: 5 | RNVC: 2

12 Aug 1987

5340-12-188-4689
Retaining Strap

121884689
PAN4285-22: RNCC: 3 | RNVC: 2

13 Jul 1981

5340-12-360-0125
Mounting Plate

123600125
24-520-JK-004: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-134-0291
Retaining Strap

121340291
59-045: RNCC: 3 | RNVC: 2
090961100000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-169-9656
Bail Handle

121699656
405-1114: RNCC: 3 | RNVC: 2

15 Jun 1977

5340-12-320-1338
Strap Hinge

123201338
0593301: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-305-5990
Retaining Strap

123055990
4115520054: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-387-0589
Mounting Bracket

123870589
2300588-480312.000: RNCC: 2 | RNVC: 2
2300588-480312.000: RNCC: 3 | RNVC: 2

2 Nov 2011

5340-12-306-1057
Manual Control Handle

123061057
9033664: RNCC: 3 | RNVC: 2

28 Jan 1986

5340-12-197-8067
Dust And Moisture Seal Protective Plug

121978067
600B385: RNCC: 3 | RNVC: 2
GPN600B385: RNCC: 5 | RNVC: 2
GPN600B385: RNCC: 5 | RNVC: 2
600038500: RNCC: 5 | RNVC: 9
GPN600,B385: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-187-9343
Retaining Strap

121879343
2505401: RNCC: 3 | RNVC: 2

19 May 1981

5340-12-028-4110

5340-12-345-7955
Access Cover

123457955
TA3014P009: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-335-3718
Catch Strike

123353718
073-371010-901-0: RNCC: 2 | RNVC: 2
073-371010-901-0: RNCC: 3 | RNVC: 2

15 Aug 1994

5340-12-379-4370
Expansion Shield

123794370
040806: RNCC: 3 | RNVC: 2
4006209408063: RNCC: 5 | RNVC: 2
FBN II 8/5 K: RNCC: 5 | RNVC: 2

22 Jul 2009

5340-12-358-6832
Angle Bracket

123586832
2481-390102.000.0: RNCC: 2 | RNVC: 2
2481-390102.000.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-317-7549
Dust And Moisture Seal Protective Cap

123177549
4/0019/7009/4: RNCC: 3 | RNVC: 2

9 May 1989

5340-12-307-8157
Mending Plate

123078157
2500179-350700.010.0: RNCC: 2 | RNVC: 2
2500179-350700.010.0: RNCC: 3 | RNVC: 2

29 Jul 1986

5340-12-171-2024
Expansion Shield

121712024
81960010221: RNCC: 3 | RNVC: 2
81.96001-0221: RNCC: 5 | RNVC: 2
02-3175: RNCC: 5 | RNVC: 2
13478: RNCC: 5 | RNVC: 2

16 Sep 1977

5340-12-391-5071
Mechanical Stop

123915071
DW 410 309 A: RNCC: 3 | RNVC: 2
DW 410 309 A: RNCC: 5 | RNVC: 2

15 Mar 2013

5340-12-368-8202
Angle Bracket

123688202
1030010-180780.001.0: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-12-377-1081
Multiple Angle Bracket

123771081
1030027-240000.001.0: RNCC: 3 | RNVC: 2

11 Dec 2008

5340-12-342-2421
Sealing Plug Assembly

123422421
11100880137: RNCC: 3 | RNVC: 2
11.10088-0137: RNCC: 5 | RNVC: 2
11.10088-0137: RNCC: 5 | RNVC: 2
11.10088-0137: RNCC: 5 | RNVC: 2
11100880137: RNCC: 5 | RNVC: 2

9 Jan 1997

5340-12-350-2013
Retaining Strap

123502013
V6550-06001-139: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-168-3138
Buckle

121683138
6490905: RNCC: 3 | RNVC: 2
972390-426308: RNCC: 5 | RNVC: 2

7 Mar 1977

5340-12-306-7307
Butt Hinge Leaf

123067307
28.06.205-140.03: RNCC: 3 | RNVC: 2
286-205-140-030: RNCC: 5 | RNVC: 2

25 Mar 1986

5340-12-356-2406
Mounting Bracket

123562406
2339-070030A03B: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-309-8182
Dust And Moisture Seal Protective Cap

123098182
320-997001-01: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-153-6428
Rod End Clevis

121536428
NO PRIMARY REF 12-153-6428: RNCC: 3 | RNVC: 2
8653401: RNCC: 5 | RNVC: 9
91001312: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-8087
Mounting Bracket

123198087
335907-0603.000: RNCC: 2 | RNVC: 2
335907-0603.000: RNCC: 3 | RNVC: 2
335907-0603.000: RNCC: 5 | RNVC: 9

7 Nov 1989

5340-12-135-6977

5340-12-340-5189
Helical Compression Spring Seat

123405189
5909930026: RNCC: 3 | RNVC: 2
5909930026: RNCC: 5 | RNVC: 2
5909930026: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-043-9616

5340-12-358-2028
Mechanical Stop

123582028
2500262-000200.001.0: RNCC: 2 | RNVC: 2
2500262-000200.001.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-344-3764
Mounting Bracket

123443764
A-566920-039: RNCC: 3 | RNVC: 2
A566920-039: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-196-7706
Angle Bracket

121967706
P-296873-423: RNCC: 3 | RNVC: 2
P296873-423: RNCC: 5 | RNVC: 2

15 Aug 1983

5340-12-196-5525
Lock-Release Lever

121965525
C22136-A1000-C213: RNCC: 3 | RNVC: 2
C22136A1000C213: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-321-4280
Strap Hinge Leaf

123214280
7068-58100-013-2: RNCC: 3 | RNVC: 2

17 May 1990

5340-12-197-3354
Mending Plate

121973354
86-1559-201200.005.0: RNCC: 3 | RNVC: 2
86-1559-201200.005.0: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-177-0930
Webbing Strap

121770930
2300012-4135.00: RNCC: 2 | RNVC: 2
2300012-4135.00: RNCC: 3 | RNVC: 2
2300012-4135.00: RNCC: 3 | RNVC: 2
23290-151057: RNCC: 5 | RNVC: 9
2300012-4135-00: RNCC: 5 | RNVC: 9
23290-151057: RNCC: 5 | RNVC: 9
2300012-4135.00: RNCC: 5 | RNVC: 9
2300012-4135.00: RNCC: 5 | RNVC: 9
2300012-4135-00: RNCC: 5 | RNVC: 9
23290-151057: RNCC: 5 | RNVC: 9

15 Jan 1979

5340-12-300-2120
Retaining Strap

123002120
1989950020: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-354-3151
Mounting Bracket

123543151
4274261140: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-12-315-2522
Spring Tension Clip

123152522
3816880183: RNCC: 3 | RNVC: 2
381 688 01 83: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-163-2415
An Scharnierlappen

5340-12-130-4708
Spannschlosz

5340-12-311-6061
Butt Hinge Leaf

123116061
LN9372AG1260: RNCC: 2 | RNVC: 2

24 Sep 1987

5340-12-349-5079
Rod End Clevis

123495079
24901031: RNCC: 3 | RNVC: 2
249036: RNCC: 5 | RNVC: 2
280433: RNCC: 5 | RNVC: 2

23 Nov 1999

5340-12-168-2805
Loop Clamp

121682805
LN9491B21: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-392-4944
Spring Loaded Cylinder Fastener

123924944
GN 417-8-C: RNCC: 3 | RNVC: 2
GN 417-8-C: RNCC: 5 | RNVC: 2
GN417-8-C: RNCC: 5 | RNVC: 2

13 Jun 2013

5340-12-334-2079
Hand Crank

123342079
201 644: RNCC: 3 | RNVC: 2
201644: RNCC: 5 | RNVC: 2
1889.5.38.00: RNCC: 5 | RNVC: 2

12 Apr 1994

5340-12-190-6827
Electrical-Mechanical Equipment Post

121906827
NO PRIMARY REF 12-190-6827: RNCC: 3 | RNVC: 2
7801 137675: RNCC: 5 | RNVC: 9
7801137675: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-702-9370
Dust And Moisture Seal Protective Cap

127029370
VG95211-ML-127029370: RNCC: 2 | RNVC: 2
N1163-36: RNCC: 3 | RNVC: 2
0500800948179: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-167-8532
Detent Plunger

121678532
5800748-1127.005: RNCC: 3 | RNVC: 2
5800748-1127-005: RNCC: 5 | RNVC: 9

26 Jan 1977

5340-12-318-8532
Handwheel

123188532
DIN950-A4-100X12-GG: RNCC: 2 | RNVC: 2
06270-10X12: RNCC: 3 | RNVC: 2
NLM627-10X12: RNCC: 5 | RNVC: 9
NLM6270-10X12: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-310-9926
Mending Plate

123109926
NGE 108-2500.002: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-332-1314
Spring Tension Clip

123321314
1H0853585A: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-173-1665
Extension Drawer Slide Section

121731665
5801113-111109: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-12-140-6798
Buckle

121406798
T3816: RNCC: 3 | RNVC: 2
2260928: RNCC: 3 | RNVC: 2
2260-928: RNCC: 5 | RNVC: 2
T3816: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-4697
Dust And Moisture Seal Protective Cap

123104697
800M36X2: RNCC: 3 | RNVC: 2
GPN800,M36X2 FORM A: RNCC: 5 | RNVC: 2
779009877: RNCC: 5 | RNVC: 2
800362000: RNCC: 5 | RNVC: 2
004078 3620: RNCC: 5 | RNVC: 2

25 May 1987

5340-12-199-8988
Dust And Moisture Seal Protective Cap

121998988
8977519624: RNCC: 3 | RNVC: 2
81.52315.0041: RNCC: 5 | RNVC: 2
81523150041: RNCC: 5 | RNVC: 2

14 Jun 1984

5340-12-381-7396
Protection Bellows

123817396
MANF006000200XXXXX: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-12-320-6331
Bow Handle

123206331
3.299.1303: RNCC: 3 | RNVC: 2
20H239: RNCC: 5 | RNVC: 2
09 0004 130: RNCC: 5 | RNVC: 9

2 Feb 1990

5340-12-359-8670
Mounting Plate

123598670
SP18954: RNCC: 3 | RNVC: 2
71.2.238.0006: RNCC: 5 | RNVC: 9

17 Mar 2003

5340-12-301-5163
Mending Plate

123015163
1000163-371011.001.0: RNCC: 2 | RNVC: 2
1000163-371011.001.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-190-7337
Mending Plate

121907337
CF 327 327: RNCC: 3 | RNVC: 2
CF 327 327: RNCC: 5 | RNVC: 2
CF327327: RNCC: 5 | RNVC: 2
CF327327: RNCC: 5 | RNVC: 2

10 Dec 1981

5340-12-361-8270
Rim Lock

123618270
3107-0001: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-12-193-9845
Dust And Moisture Seal Protective Cap

121939845
F00993836: RNCC: 3 | RNVC: 2
F0.099.3836: RNCC: 5 | RNVC: 2
KD498-80-19PPD: RNCC: 5 | RNVC: 9

21 Sep 1982

5340-12-387-9672
Retaining Strap

123879672
5803744-003000.00: RNCC: 2 | RNVC: 2
5803744-003000.00: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-12-194-2993
Lock-Release Lever

121942993
C42334-A228-B78: RNCC: 3 | RNVC: 2
C42334A228B78: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-12-375-9622
Hose-Cable Hanger

123759622
238-20: RNCC: 3 | RNVC: 2
4078500023801: RNCC: 5 | RNVC: 2

24 Jul 2008

5340-12-305-0184
Angle Bracket

123050184
5801759-010000.003: RNCC: 2 | RNVC: 2
5801759-010000.003: RNCC: 3 | RNVC: 2
5801759-010000.003: RNCC: 5 | RNVC: 9

17 Sep 1985

5340-12-368-1340
Access Cover

123681340
5161-360000B06B: RNCC: 2 | RNVC: 2
5161-360000B06B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-198-1438
Double Angle Bracket

121981438
5801999-320000.02: RNCC: 2 | RNVC: 2
5801999-320000.02: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-304-3421
Butt Hinge Leaf

123043421
2500093-1200.24: RNCC: 2 | RNVC: 2
2500093-1200.24: RNCC: 3 | RNVC: 2
2500093-1200.24: RNCC: 5 | RNVC: 9

8 Jul 1985

5340-12-356-2413
Mounting Bracket

123562413
2339-010480A07B: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-361-7927
Mounting Bracket

123617927
2300042-066000.001: RNCC: 2 | RNVC: 2
2300042-066000.001: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-311-3642
Helical Compression Spring Retainer

123113642
S4-2400580: RNCC: 3 | RNVC: 2
S4-2400580: RNCC: 5 | RNVC: 9

24 Aug 1987

5340-12-183-2899
Retaining Strap

121832899
4670-0000-0010: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-198-1128
Mending Plate

121981128
5801411-33012.010: RNCC: 3 | RNVC: 2
5801411-33012.010: RNCC: 5 | RNVC: 9

21 Dec 1983

5340-12-372-7080
Manual Control Lever

123727080
6111-31-09-40: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-12-185-8045
Mending Plate

121858045
298-816: RNCC: 3 | RNVC: 2
553172177: RNCC: 5 | RNVC: 2
1002-2407-0301: RNCC: 5 | RNVC: 2
785905: RNCC: 5 | RNVC: 2

1 Nov 1980

5340-12-198-0498
Double Angle Bracket

121980498
43711182-301: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-324-0008
Clamping Catch

123240008
TL-40-204-07: RNCC: 3 | RNVC: 2
00 6405 044: RNCC: 3 | RNVC: 2
TL802 DA: RNCC: 5 | RNVC: 9

15 Jan 1991

5340-12-702-1889
Retaining Strap

127021889
VG95211-ML-127021889: RNCC: 2 | RNVC: 2
30.7208.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-5888
Angle Bracket

123655888
J32320066-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-371-0150
Split Tubular Clip

123710150
II 16774: RNCC: 3 | RNVC: 2
81.25937-0011: RNCC: 5 | RNVC: 2
81.25937.0011: RNCC: 5 | RNVC: 2
81259370011: RNCC: 5 | RNVC: 2

25 Jan 2007

5340-12-356-5647
Mounting Bracket

123565647
2125-125214.05B: RNCC: 2 | RNVC: 2
2125-125214.05B: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-365-4507
Multiple Angle Bracket

123654507
04044800: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-369-1202
Grooved Clamp Coupling Ferrule

123691202
878331: RNCC: 3 | RNVC: 2

24 May 2006

5340-12-191-3183
Nut And Bolt Locking Plate

121913183
103700041001000KMT11CUZN35NIF45: RNCC: 3 | RNVC: 9

26 Jan 1982

5340-12-351-6766
Mounting Bracket

123516766
2300387-612110.000: RNCC: 2 | RNVC: 2
9909007: RNCC: 3 | RNVC: 2
9909007: RNCC: 5 | RNVC: 9
2300387-612110.000: RNCC: 5 | RNVC: 9

15 Aug 2000

5340-12-043-2690

5340-12-043-3423

5340-12-365-1203
Spring Tension Clip

123651203
4634350340: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-194-3750
Angle Bracket

121943750
65.7096.200.02-A001: RNCC: 3 | RNVC: 2
253786: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-180-0572
Webbing Strap

121800572
3827900596: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-370-1577
Spring Tension Clip

123701577
1304682038: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-313-5445
Dust And Moisture Seal Protective Plug

123135445
600B360: RNCC: 3 | RNVC: 2
GPN600B360: RNCC: 5 | RNVC: 2
GPN600B360: RNCC: 5 | RNVC: 2
600036000: RNCC: 5 | RNVC: 9
GPN600,B360: RNCC: 5 | RNVC: 9

14 Apr 1988

5340-12-364-1984
Rim Lock

123641984
215.102419: RNCC: 3 | RNVC: 2
10.2419: RNCC: 5 | RNVC: 2

1 Sep 2004

5340-12-180-7892
Platte

121807892
CU400489E: RNCC: 3 | RNVC: 2
CU 400 489 E: RNCC: 5 | RNVC: 2
CU400489E: RNCC: 5 | RNVC: 2
CU 400 489 E: RNCC: 5 | RNVC: 2
CU400489E: RNCC: 5 | RNVC: 2
CU 400 489 E: RNCC: 5 | RNVC: 2

4 Oct 1979

5340-12-394-3839
Butt Hinge

123943839
219-9005: RNCC: 3 | RNVC: 2

27 Nov 2013

5340-12-316-4805
Mounting Plate

123164805
P-087043-037: RNCC: 3 | RNVC: 2
P087043-037: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-309-4762
Loop Clamp

123094762
DIN3016-1-D1-24X12-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-24X12-W5: RNCC: 3 | RNVC: 2
RSGU1.24/12-W5: RNCC: 3 | RNVC: 2
26002250620: RNCC: 5 | RNVC: 2
09410712024: RNCC: 5 | RNVC: 2
9410712024: RNCC: 5 | RNVC: 2
RSGU1.24/12W5: RNCC: 5 | RNVC: 2
Q 314 176 124: RNCC: 5 | RNVC: 2
DIN3016-D1-24X12-W5: RNCC: 5 | RNVC: 9
VG95931-D24X12-W5: RNCC: 5 | RNVC: 9

27 Jan 1987

5340-12-348-2150
Retaining Strap

123482150
2500253-192300.001.0: RNCC: 2 | RNVC: 2
2500253-192300.001.0: RNCC: 3 | RNVC: 2

7 May 1999

5340-12-305-0553
Angle Bracket

123050553
P-230229-297: RNCC: 3 | RNVC: 2
P230229-297: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-145-2363
Compression Cup

121452363
TDUO40-39 40X10X25-80NBR/709: RNCC: 3 | RNVC: 2
OD28627A: RNCC: 5 | RNVC: 1
15-15000-33: RNCC: 5 | RNVC: 2
150718E ITEM 1.53: RNCC: 5 | RNVC: 2
TDU0-40-39: RNCC: 5 | RNVC: 2
20-011-01: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-302-0248
Double Angle Bracket

123020248
P-855977-406: RNCC: 3 | RNVC: 2
P855977-406: RNCC: 5 | RNVC: 2

28 Nov 1984

5340-12-306-0950
Resilient Mount

123060950
155001-5,1-HD.AM-40: RNCC: 3 | RNVC: 2
5105 HDS A: RNCC: 3 | RNVC: 2
E1E 11S 38 AL: RNCC: 3 | RNVC: 2
35343-012: RNCC: 3 | RNVC: 2
5105 HDS A: RNCC: 5 | RNVC: 2
35 343-012: RNCC: 5 | RNVC: 9
5105 HDS A: RNCC: 5 | RNVC: 9

27 Jan 1986

5340-12-317-7446
Mounting Plate

123177446
P-230234-013: RNCC: 3 | RNVC: 2
P230234-013: RNCC: 5 | RNVC: 2

8 May 1989

5340-12-366-8766
Spring Tension Clip

123668766
918002005001: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-377-7697
Access Cover

123777697
S259M8030205: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-357-5219
Mounting Plate

123575219
T311M3120102: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-308-3143
Mending Plate

123083143
151-47616: RNCC: 3 | RNVC: 2

25 Sep 1986

5340-12-312-7269
Coat And Hat Hook

123127269
3818140201: RNCC: 3 | RNVC: 2
381 814 02 01: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-374-3166
Angle Bracket

123743166
153 6150-676: RNCC: 3 | RNVC: 2
153 6150-676: RNCC: 5 | RNVC: 2

7 Feb 2008

5340-12-394-1146
Dust And Moisture Seal Protective Cap

123941146
CTP40290P005: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-374-1620
Mounting Plate

123741620
AH30169P01: RNCC: 3 | RNVC: 2

24 Jan 2008

5340-12-199-4658
Angle Bracket

121994658
8731500773: RNCC: 2 | RNVC: 2
8731500773: RNCC: 3 | RNVC: 2

27 Apr 1984

5340-12-302-4807
Butt Hinge

123024807
255971: RNCC: 3 | RNVC: 2

7 Jan 1985

5340-12-344-1472
Mounting Bracket

123441472
798.2149: RNCC: 3 | RNVC: 2
7982149: RNCC: 5 | RNVC: 2

18 Sep 1997

5340-12-383-5955
Retaining Strap

123835955
865306402: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-12-134-4905

5340-12-020-4904

5340-12-362-6663
Dust And Moisture Seal Protective Cap

123626663
83052-7: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-157-2847
Angle Bracket

121572847
773-201-29: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-319-2587
Mounting Plate

123192587
NO PRIMARY REF 12-319-2587: RNCC: 3 | RNVC: 2
5801288-11100.02: RNCC: 5 | RNVC: 9
5801288-11100.02: RNCC: 5 | RNVC: 9

15 Sep 1989

5340-12-177-1569
Bow Handle

121771569
5801214-26: RNCC: 3 | RNVC: 2

17 Jan 1979

5340-12-344-6550
Access Cover

123446550
54.0053.085.01: RNCC: 3 | RNVC: 2
3039A150-001: RNCC: 5 | RNVC: 2

24 Nov 1997

5340-12-325-1792
Double Angle Bracket

123251792
5803576-200700.01: RNCC: 2 | RNVC: 2
5803576-200700.01: RNCC: 3 | RNVC: 2

14 May 1991

5340-12-300-2188
Mending Plate

123002188
23114-0100.03: RNCC: 2 | RNVC: 2
23114-0100.03: RNCC: 3 | RNVC: 2
23114-0100.03: RNCC: 5 | RNVC: 9
23114-0100-03: RNCC: 5 | RNVC: 9
23114-0100-03: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-393-1827
Dust And Moisture Seal Protective Cap

123931827
GPN200Z38X25-RAL3000: RNCC: 3 | RNVC: 2
200Z38X25-RAL3000: RNCC: 5 | RNVC: 2
9560128570: RNCC: 5 | RNVC: 2
GPN200Z38X25-RAL3000: RNCC: 5 | RNVC: 2

15 Aug 2013

5340-12-134-0673
Nonmetallic Bumper

121340673
03420979: RNCC: 3 | RNVC: 2
3420979EF5018-66: RNCC: 5 | RNVC: 2
5155-66-04.06: RNCC: 5 | RNVC: 2
3420979EF5018-66: RNCC: 5 | RNVC: 2
0342 0979: RNCC: 5 | RNVC: 2
5155-66-04-06: RNCC: 5 | RNVC: 2
5155-66-04-06: RNCC: 5 | RNVC: 2
3420979: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-3381
Mounting Plate

123553381
V6507-20075-104: RNCC: 2 | RNVC: 2
V6507-20075-104: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-198-1921
Angle Bracket

121981921
1421332001: RNCC: 3 | RNVC: 2
0128 8655: RNCC: 5 | RNVC: 2
01288655EY0147-17: RNCC: 5 | RNVC: 2
VDPM00724: RNCC: 5 | RNVC: 2
5100112629: RNCC: 5 | RNVC: 2
1421332001: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-314-1102
Mending Plate

123141102
6100127-0000.12: RNCC: 2 | RNVC: 2
8791331269: RNCC: 3 | RNVC: 9

8 Jun 1988

5340-12-362-2734
Angle Bracket

123622734
J21520063-003: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-356-7044
Helical Compression Spring Retainer

123567044
33036-003-022: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-143-6375
Loop Clamp

121436375
RSGU1.8033.27/20: RNCC: 3 | RNVC: 2
0009950007: RNCC: 5 | RNVC: 2
4218033000: RNCC: 5 | RNVC: 2
RSGU1.8033-27/20: RNCC: 5 | RNVC: 2
RSGU11-033-027-20: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-8537
Handwheel

121958537
12729-12950.001: RNCC: 2 | RNVC: 2
12729-12950.001: RNCC: 3 | RNVC: 2
12729-12950-001: RNCC: 5 | RNVC: 2
12729-12950.001: RNCC: 5 | RNVC: 9

25 Apr 1983

5340-12-325-0802
Resilient Mount

123250802
DIN95363-A20X25-M6X12-NR40ST: RNCC: 2 | RNVC: 2
500023-M6X12.NR40.ST: RNCC: 5 | RNVC: 2
101559: RNCC: 5 | RNVC: 2
VG95363-A20X25-M6X12-NR40ST: RNCC: 5 | RNVC: 9

30 Apr 1991

5340-12-702-4165
Mounting Bracket

127024165
VG95211-ML-127024165: RNCC: 2 | RNVC: 2
5.12.7001.1191.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-7406
Rod End Connector

123077406
1218 9366: RNCC: 3 | RNVC: 2
12189366: RNCC: 5 | RNVC: 9
6-226-0-473-007-4: RNCC: 5 | RNVC: 9
6.226.0.473.007.4: RNCC: 5 | RNVC: 9

22 Jul 1986

5340-12-378-6610
Spring Loaded Cylinder Fastener

123786610
GN717-8-CK-NI: RNCC: 3 | RNVC: 2

29 Apr 2009

5340-12-701-7100
Mounting Bracket

127017100
VG95211-ML-127017100: RNCC: 2 | RNVC: 2
5.12.7601.2190.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-166-1283
Nonmetallic Bumper

121661283
NO PRIMARY REF 12-166-1283: RNCC: 3 | RNVC: 2
25-57922-00: RNCC: 5 | RNVC: 9
25/57922.00: RNCC: 5 | RNVC: 9
7852 557922: RNCC: 5 | RNVC: 9
7852557922: RNCC: 5 | RNVC: 9

31 Jul 1976

5340-12-321-3080
Mending Plate

123213080
536L02009: RNCC: 3 | RNVC: 2

3 May 1990

5340-12-094-0952

5340-12-043-2947

5340-12-322-8092
Plain Solid Disk

123228092
8470 032 150: RNCC: 3 | RNVC: 2
8470032150: RNCC: 5 | RNVC: 2
8470032150: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-352-0419
Retaining Strap

123520419
J36120130-001: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-12-366-8456
Mounting Bracket

123668456
948291877: RNCC: 3 | RNVC: 2
3201-792.02.01.120-001: RNCC: 5 | RNVC: 2

15 Jun 2005

5340-12-390-7520
Mounting Actuator Plate

123907520
05-700227: RNCC: 2 | RNVC: 2
05-700227: RNCC: 3 | RNVC: 2
05-700227: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-12-357-1018
Loop Clamp

123571018
EN4114F09WH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-178-7875
Angle Bracket

121787875
81974850115: RNCC: 3 | RNVC: 2

16 May 1979

5340-12-044-3497

5340-12-198-3416
Clamp Bolt Assembly

121983416
5802017-321000.00: RNCC: 2 | RNVC: 2
5802017-321000.00: RNCC: 3 | RNVC: 2
5802017-321000.00: RNCC: 3 | RNVC: 2
2-12.010: RNCC: 3 | RNVC: 2
5802017-321000.00: RNCC: 3 | RNVC: 2
5802017-321000.00: RNCC: 5 | RNVC: 2
7071121: RNCC: 5 | RNVC: 2
5802017-321000.00: RNCC: 5 | RNVC: 9

18 Jan 1984

5340-12-311-3651
Angle Bracket

123113651
P-230229-311: RNCC: 3 | RNVC: 2
P230229-311: RNCC: 5 | RNVC: 2

24 Aug 1987

5340-12-308-6712
Mending Plate

123086712
6109-4-03-2: RNCC: 3 | RNVC: 2
6109-4-03-0: RNCC: 5 | RNVC: 9

5 Nov 1986

5340-12-196-2982
Loop Clamp

121962982
DIN3016-2-G1-145X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-145X20-W1-2: RNCC: 3 | RNVC: 2
SP145/20SKZ: RNCC: 3 | RNVC: 2
SP145-20SKZ: RNCC: 5 | RNVC: 2
1510000145: RNCC: 5 | RNVC: 2
249233997: RNCC: 5 | RNVC: 2
DIN3016-G1-145X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-G145X20-W1: RNCC: 5 | RNVC: 9

23 Jun 1983

5340-12-192-3154
Catch Strike

121923154
42316567: RNCC: 3 | RNVC: 2
42316567EE5616-18: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-198-0969
Angle Bracket

121980969
1200096-1131D0001: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-308-6793
Angle Bracket

123086793
1281-19074: RNCC: 2 | RNVC: 2
159748: RNCC: 3 | RNVC: 2
1281-19074: RNCC: 5 | RNVC: 2

7 Nov 1986

5340-12-701-3912
Loop Clamp

127013912
VG95211-ML-127013912: RNCC: 2 | RNVC: 2
5.12.5311.1000.27: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-375-9859
Dust And Moisture Seal Protective Plug

123759859
5.411-124.0: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-12-185-2635
Loop Clamp

121852635
DIN3016-G1-111X20-W1-2: RNCC: 2 | RNVC: 2
SP111/20X1,25SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-111X20-W1-2: RNCC: 3 | RNVC: 2
SP111-20X1-25SKN288A: RNCC: 5 | RNVC: 2
900288111100: RNCC: 5 | RNVC: 2
SP111-20X1-25SKN288A: RNCC: 5 | RNVC: 2
SP111/20X1,25SKN288A: RNCC: 5 | RNVC: 2
1510000111: RNCC: 5 | RNVC: 2
SP111-20SKZ: RNCC: 5 | RNVC: 2
VG95931-G111X20X1,25-W1: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-370-1487
Clamping Catch

123701487
QC-200-CVF: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-358-2817
Nonmetallic Bumper

123582817
2500261-065000.003.0: RNCC: 2 | RNVC: 2
2500261-065000.003.0: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-12-315-2021
Retaining Strap

123152021
401320-23: RNCC: 3 | RNVC: 2

30 Sep 1988

5340-12-195-2607
Dust And Moisture Seal Protective Cap

121952607
PAN3860-03R: RNCC: 3 | RNVC: 2

31 Jan 1983

5340-12-320-7986
Mounting Plate

123207986
0213 8266: RNCC: 3 | RNVC: 2
2138266ED0150-01: RNCC: 5 | RNVC: 2

16 Feb 1990

5340-12-358-2564
Angle Bracket

123582564
61.9802.267.00-A001: RNCC: 3 | RNVC: 2
61.9802.267.00-A001: RNCC: 5 | RNVC: 9

2 Oct 2002

5340-12-702-8544
Support Hook

127028544
52-04045105124: RNCC: 2 | RNVC: 2

4 Jan 1996

5340-12-392-7554
Expansion Plug

123927554
DIN470-56-ST-A3L: RNCC: 2 | RNVC: 2
0010123: RNCC: 5 | RNVC: 2

5 Jul 2013

5340-12-146-7058
Retaining Strap

121467058
TW931-2140-112: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-176-4855
Angle Bracket

121764855
81658022137: RNCC: 3 | RNVC: 2
81.65802-2137: RNCC: 5 | RNVC: 2
00001209081: RNCC: 5 | RNVC: 2

30 Nov 1978

5340-12-125-0085
Expansion Plug

121250085
DIN470-25-ST-PHR: RNCC: 2 | RNVC: 2
25DIN470-ST-PHR: RNCC: 5 | RNVC: 2
DIN470-25-PHR: RNCC: 5 | RNVC: 2
25DIN470PHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-180-2144
Angle Bracket

121802144
02631985: RNCC: 3 | RNVC: 2
2631985EE5505-34: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-347-8033
Blank Panel

123478033
2300405-250609.001: RNCC: 2 | RNVC: 2
9918028: RNCC: 3 | RNVC: 2
2300405-250609.001: RNCC: 5 | RNVC: 2
2300405-250609.001: RNCC: 5 | RNVC: 9
9918028: RNCC: 5 | RNVC: 9

11 Feb 1999

5340-12-150-3985

5340-12-189-2695
Expansion Plug

121892695
DIN443-A40-ST-A3P: RNCC: 2 | RNVC: 2
DIN433-A40-DBL8451.11: RNCC: 5 | RNVC: 2
DIN443-A40-DBL8451.11: RNCC: 5 | RNVC: 2
DIN443-B22-MS63: RNCC: 5 | RNVC: 2
DIN433-A40-DBL8451.11: RNCC: 5 | RNVC: 2
DIN443-A40-DBL8451.11: RNCC: 5 | RNVC: 2
DIN443-B22-MS63: RNCC: 5 | RNVC: 2
A40DIN443A3B: RNCC: 5 | RNVC: 2

16 Sep 1981

5340-12-382-6863
Access Cover

123826863
6096374: RNCC: 3 | RNVC: 2
600.2M1 340.020.71.10.8505/01/24: RNCC: 5 | RNVC: 2
81671390010: RNCC: 5 | RNVC: 2
22077: RNCC: 5 | RNVC: 2

26 Jul 2010

5340-12-186-5317
Double Angle Bracket

121865317
1000086-101210-01: RNCC: 2 | RNVC: 2
1000086-101210-01: RNCC: 5 | RNVC: 2
1000086-101210.01: RNCC: 5 | RNVC: 9
1000086-101210-01: RNCC: 5 | RNVC: 9

14 Jan 1981

5340-12-324-3900
Angle Bracket

123243900
608.11-00-00-00-022: RNCC: 3 | RNVC: 2
142551: RNCC: 5 | RNVC: 2

12 Feb 1991

5340-12-321-9266
Mortise Lock Set

123219266
00394 000: RNCC: 3 | RNVC: 2

10 Jul 1990

5340-12-120-3321

5340-12-194-3719
Nonmetallic Bumper

121943719
281827525B: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-12-349-2067
Plain Solid Disk

123492067
127502: RNCC: 3 | RNVC: 2
00127502: RNCC: 5 | RNVC: 2

7 Oct 1999

5340-12-042-1623

5340-12-316-1617
Lock-Release Lever

123161617
133454: RNCC: 3 | RNVC: 2
400-550.0050: RNCC: 5 | RNVC: 2

28 Dec 1988

5340-12-324-6463
Retaining Clip

123246463
90.703.06.768: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-180-0409
Resilient Mount

121800409
3222400017: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-027-1091

5340-12-370-3327
Nonmetallic Bumper

123703327
0117 7993: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-12-350-3432
Access Cover

123503432
1121-60911.14: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-384-2115
Mounting Bracket

123842115
4565038881: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-12-390-6373
Retaining Band

123906373
T130117205AB3A: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-12-092-0919

5340-12-092-3157

5340-12-092-0918

5340-12-141-3313
Snap Hook

121413313
NO PRIMARY REF 12-141-3313: RNCC: 3 | RNVC: 2
610-30: RNCC: 5 | RNVC: 9
2512-44-56: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-158-9357
Spring Tension Clip

121589357
2572-190470.01.0: RNCC: 2 | RNVC: 2
2572-190470-01-0: RNCC: 5 | RNVC: 2
2572-190470-01-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-3529
Angle Bracket

123193529
1000192-05 0 10180: RNCC: 2 | RNVC: 2
1000192-05 0 10180: RNCC: 3 | RNVC: 2
1000192-05 0 10180: RNCC: 5 | RNVC: 9

26 Sep 1989

5340-12-363-6009
Mounting Bracket

123636009
2300007-151000.000.0: RNCC: 2 | RNVC: 2
2300007-151000.000.0: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-12-321-4999
Mending Plate

123214999
365.866-283: RNCC: 3 | RNVC: 2
365866-284: RNCC: 5 | RNVC: 2
410.17.14.000: RNCC: 5 | RNVC: 2

25 May 1990

5340-12-302-7687
Dust And Moisture Seal Protective Cap

123027687
705520-0047.000: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-308-3823
Double Angle Bracket

123083823
7075801: RNCC: 3 | RNVC: 2

3 Oct 1986

5340-12-383-7112
Filler Opening Cap

123837112
5011-133000A07B: RNCC: 3 | RNVC: 2

29 Nov 2010

5340-12-167-3800
Catch Strike

121673800
1400003-11005-03: RNCC: 3 | RNVC: 2
1400003-11005-03: RNCC: 5 | RNVC: 9
1400003-11005.03: RNCC: 5 | RNVC: 9

16 Dec 1976

5340-12-305-4306
Compression Cup

123054306
TFH72,7-98-10-4TF/529: RNCC: 3 | RNVC: 2
TFH72,7-98-10: RNCC: 5 | RNVC: 2
TFH72,7X98X10-4TF/529: RNCC: 5 | RNVC: 2

5 Nov 1985

5340-12-320-6469
Mounting Bracket

123206469
991-410810.00.0: RNCC: 3 | RNVC: 2
991-410810.00.0: RNCC: 5 | RNVC: 9

5 Feb 1990

5340-12-367-6689
Mounting Bracket

123676689
SK861-851070.000.0: RNCC: 3 | RNVC: 2

21 Sep 2005

5340-12-188-9161
Lock-Release Lever

121889161
5801433-031000.03.0: RNCC: 3 | RNVC: 2
5801433-031000-03-0: RNCC: 5 | RNVC: 2
5801433-031000-03-0: RNCC: 5 | RNVC: 9
5801433-031000.03.0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-196-9458
Double Angle Bracket

121969458
4900059-221456.000.0: RNCC: 3 | RNVC: 2
4900059-221456-000-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-348-6699
Retaining Clamp Assembly

123486699
7068-01000-000-2: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-197-5841
Mending Plate

121975841
A-230129-143: RNCC: 3 | RNVC: 2
A230129-143: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-158-7125
Door Button

121587125
NO PRIMARY REF 12-158-7125: RNCC: 3 | RNVC: 2
72DIN31215-ST00-VERZINKT: RNCC: 5 | RNVC: 9
72DIN31215-ST00-VERZINKT: RNCC: 5 | RNVC: 9
72DIN31215ST00VERZINKT: RNCC: 5 | RNVC: 9
DIN31215-72-ST-ZN: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-330-3180
Door Handle

123303180
16-4-005: RNCC: 3 | RNVC: 2
16-4-005: RNCC: 5 | RNVC: 2
16-4-005: RNCC: 5 | RNVC: 2
16-4-005: RNCC: 5 | RNVC: 9

2 Dec 1992

5340-12-362-0086
Loop Clamp

123620086
DIN3016-1-D1-22X20-W1-2-NBR: RNCC: 2 | RNVC: 2

16 Dec 2003

5340-12-322-9526
Double Angle Bracket

123229526
6734921141: RNCC: 3 | RNVC: 2
673 492 11 41: RNCC: 5 | RNVC: 2

10 Oct 1990

5340-12-359-4764
Dust And Moisture Seal Protective Cap

123594764
864-9819-290: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-12-380-0389
Mounting Bracket

123800389
95004351: RNCC: 3 | RNVC: 2

22 Sep 2009

5340-12-180-0501
Helical Compression Spring Seat

121800501
0287 0874: RNCC: 3 | RNVC: 2
2870874: RNCC: 5 | RNVC: 2
2870874EE0693-60: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-391-4289
Mounting Bracket

123914289
I006172TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-136-8240

5340-12-159-2159
Nonmetallic Bumper

121592159
7810040BL2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-319-0496
Access Cover

123190496
54.0026.169.00: RNCC: 3 | RNVC: 2

1 Sep 1989

5340-12-308-1396
Electrical-Mechanical Equipment Post

123081396
2859060679: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-184-9565
Butt Hinge Leaf

121849565
5801357-1731.02: RNCC: 2 | RNVC: 2
5801357-1731.02: RNCC: 3 | RNVC: 2
5801357-1731-02: RNCC: 5 | RNVC: 9
100000330: RNCC: 5 | RNVC: 9
5801357-1731-02: RNCC: 5 | RNVC: 9
5801357-1731-02: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-163-0292
Catch Strike

121630292
3152: RNCC: 3 | RNVC: 2
1918-741152-018: RNCC: 5 | RNVC: 2
1918-741152-018: RNCC: 5 | RNVC: 9
1918-741152.018: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6797
Angle Bracket

127016797
VG95211-ML-127016797: RNCC: 2 | RNVC: 2
5.12.7213.8007.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3238
Angle Bracket

127033238
VG95211-ML-127033238: RNCC: 2 | RNVC: 2
5.12.7060.2370.03: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-702-4461
Metal Grille

127024461
VG95211-ML-127024461: RNCC: 2 | RNVC: 2
5.51.0240.0160.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-164-8237
Support Hook

121648237
100356-229020-02: RNCC: 2 | RNVC: 2
100356-229020-02: RNCC: 5 | RNVC: 2
100356-229020.02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-170-9482
Webbing Strap

121709482
5800044-1012.00: RNCC: 2 | RNVC: 2
5800044-1012.00: RNCC: 3 | RNVC: 2
5800044-1012.00: RNCC: 3 | RNVC: 2
5800044-1012-00: RNCC: 5 | RNVC: 2
5800044-1012-00: RNCC: 5 | RNVC: 9
5800044-1012.00: RNCC: 5 | RNVC: 9
5800044-1012.00: RNCC: 5 | RNVC: 9
000-D9-20X2,0X300-PE-RAL6031: RNCC: 6 | RNVC: 9

24 Aug 1977

5340-12-701-7999
Mounting Plate

127017999
VG95211-ML-127017999: RNCC: 2 | RNVC: 2
5.12.8102.6100.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-5159
Access Cover

123635159
1901-060200.000.0: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-701-2722
Rod End Connector

127012722
VG95211-ML-127012722: RNCC: 2 | RNVC: 2
5.12.4806.1550.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8192
Angle Bracket

127018192
VG95211-ML-127018192: RNCC: 2 | RNVC: 2
5.12.9205.0580.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-7031
Angle Bracket

123077031
RP981819: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-346-4326
Dust And Moisture Seal Protective Cap

123464326
3010: RNCC: 3 | RNVC: 2

27 Jul 1998

5340-12-345-9921
Spacing Threaded Standoff

123459921
18H314: RNCC: 3 | RNVC: 2

27 May 1998

5340-12-332-6977
Loop Clamp

123326977
9108510077: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-12-182-1299
Sicherheits Schlosz

121821299
1309165: RNCC: 3 | RNVC: 2
BKS1309: RNCC: 5 | RNVC: 2
1309165: RNCC: 5 | RNVC: 2
1309165: RNCC: 5 | RNVC: 9
BKS1309165: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-349-4948
Retaining Strap

123494948
A11A272450201A1: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-12-162-4742
Loop Clamp

121624742
HP3N: RNCC: 3 | RNVC: 2
DZ0158777: RNCC: 5 | RNVC: 2
ZBS5004: RNCC: 5 | RNVC: 2
HP3N: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-091-0891

5340-12-356-1905
Dust And Moisture Seal Protective Cap-Plug

123561905
610U11RAL3000: RNCC: 3 | RNVC: 2
GPN610U11ROUGE: RNCC: 5 | RNVC: 2
61OU11RAL3000: RNCC: 5 | RNVC: 9

30 Jan 2002

5340-12-310-3036
Nonmetallic Bumper

123103036
81960200369: RNCC: 3 | RNVC: 2
81.96020.0369: RNCC: 5 | RNVC: 2
81.96020.0333: RNCC: 5 | RNVC: 9
81960200333: RNCC: 5 | RNVC: 9

7 May 1987

5340-12-130-3137

5340-12-392-3986
Case Corner

123923986
1410930017: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-042-1180

5340-12-383-3283
Retaining Clip

123833283
9019880178: RNCC: 3 | RNVC: 2
2D0721570: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-12-391-7250
Runner

123917250
I002982TAN686A: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-12-371-6260
Mounting Bracket

123716260
213.0101.03: RNCC: 3 | RNVC: 2

27 Apr 2007

5340-12-359-0469
Double Angle Bracket

123590469
4065830351: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-317-2989
Nonmetallic Bumper

123172989
VG95092B12X5X22X7X10NR65: RNCC: 2 | RNVC: 2
3229870740: RNCC: 3 | RNVC: 2
VG95092B12X5X22X7X10NR65: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-309-1011
Access Cover

123091011
4644 301 014: RNCC: 3 | RNVC: 2
4644301014: RNCC: 5 | RNVC: 2
8994057: RNCC: 5 | RNVC: 2
4644301014: RNCC: 5 | RNVC: 2

15 Dec 1986

5340-12-313-9431
Helical Compression Spring Seat

123139431
2420324001: RNCC: 3 | RNVC: 2
8690740150: RNCC: 5 | RNVC: 2

25 May 1988

5340-12-357-2708
Access Cover

123572708
0005400882: RNCC: 3 | RNVC: 2

28 May 2002

5340-12-370-6080
Mounting Bracket

123706080
868204301: RNCC: 2 | RNVC: 2
868204301: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-12-372-5756
Dust And Moisture Seal Protective Cap

123725756
DR4002G087: RNCC: 3 | RNVC: 2
300026079: RNCC: 5 | RNVC: 2
DR4002G087 GZ: RNCC: 5 | RNVC: 9

31 Jul 2007

5340-12-377-2275
Access Cover

123772275
0115 1645: RNCC: 3 | RNVC: 2

18 Dec 2008

5340-12-701-3031
Mounting Bracket

127013031
VG95211-ML-127013031: RNCC: 2 | RNVC: 2
5.12.5101.5410.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8101
Retaining Bail

127018101
VG95211-ML-127018101: RNCC: 2 | RNVC: 2
5.12.8800.8984.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-2902
Webbing Strap

123402902
2300298-972100.001.0: RNCC: 2 | RNVC: 2
2300298-972100.001.0: RNCC: 3 | RNVC: 2
1025011-1530: RNCC: 5 | RNVC: 2
2300298-972100.001.0: RNCC: 5 | RNVC: 2
000-F7-25X1,2X1100-PE-RAL6031: RNCC: 6 | RNVC: 9

21 Mar 1996

5340-12-313-0162
Double Angle Bracket

123130162
P-086147-011: RNCC: 3 | RNVC: 2
P086147-011: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-304-7204
Hand Crank

123047204
2300126-141100.001.0: RNCC: 2 | RNVC: 2
2300126-141100.001.0: RNCC: 3 | RNVC: 2
2300126-141100.001.0: RNCC: 5 | RNVC: 2
2300126-141100.001.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-308-9268
Handle Grip

123089268
E2574: RNCC: 3 | RNVC: 2
42481448: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-314-0876
Clamping Catch

123140876
81032047: RNCC: 3 | RNVC: 2
8103204700: RNCC: 5 | RNVC: 2

4 Jun 1988

5340-12-308-3824
Mending Plate

123083824
7111901: RNCC: 3 | RNVC: 2

3 Oct 1986

5340-12-370-3271
Spacing Threaded Standoff

123703271
1216 0958: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-12-179-8160
Access Cover

121798160
4046710033: RNCC: 3 | RNVC: 2

1 Aug 1979

5340-12-340-0326
Mending Plate

123400326
DIN3015-L-VS-1-W4: RNCC: 2 | RNVC: 2
SIG-1A-W4: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-12-186-6948
Rod End Clevis

121866948
25704-190820.02.0: RNCC: 2 | RNVC: 2
25704-190820.02.0: RNCC: 3 | RNVC: 2
25704-190820-02-0: RNCC: 5 | RNVC: 2
25704-190820-02-0: RNCC: 5 | RNVC: 9
25704-190820.02.0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-321-8954
Metal Runner

123218954
7068-15300-026-2: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-12-340-0329
Loop Clamp

123400329
DIN3015-L-H-3-R-22-PP-W4: RNCC: 2 | RNVC: 2
322PP-SIG-AF-W4: RNCC: 3 | RNVC: 2
DIN3015-LH-3R-22-PP-W4: RNCC: 5 | RNVC: 2

16 Feb 1996

5340-12-189-0532
Dust And Moisture Seal Protective Cap

121890532
330701-0002.000: RNCC: 3 | RNVC: 2
330701-0002: RNCC: 5 | RNVC: 2
330701-0002.000: RNCC: 5 | RNVC: 9
6900075-0.002: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-333-8848
Mounting Bracket

123338848
405-3-1: RNCC: 3 | RNVC: 2
405-3.1: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-307-0772
Butt Hinge

123070772
E11A2488-10: RNCC: 3 | RNVC: 2
151-131000-901-0: RNCC: 5 | RNVC: 2

6 May 1986

5340-12-701-4862
Angle Bracket

127014862
VG95211-ML-127014862: RNCC: 2 | RNVC: 2
5.12.5811.8130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-378-2925
Mounting Bracket

123782925
9997023-068200.002.0: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-301-1639
Angle Bracket

123011639
A-243842-005: RNCC: 3 | RNVC: 2
A243842-005: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-179-1816
Loop Clamp

121791816
DIN3016-1-E1-34X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-34X12-W1-2: RNCC: 3 | RNVC: 2
RSGU0.34/12: RNCC: 3 | RNVC: 2
9400012034: RNCC: 5 | RNVC: 2
RSGU34-12: RNCC: 5 | RNVC: 2
RSGU34/12: RNCC: 5 | RNVC: 2
DIN3016-E1-34X12-W1-2: RNCC: 5 | RNVC: 9
VG95931E34X12W1: RNCC: 5 | RNVC: 9
VG95931-E34X12-W1: RNCC: 5 | RNVC: 9

15 Jun 1979

5340-12-308-2434
Mending Plate

123082434
0A846.91-10-00-00-001: RNCC: 3 | RNVC: 2

18 Sep 1986

5340-12-181-4829
Mending Plate

121814829
2300033-100000.05: RNCC: 2 | RNVC: 2
2300033-100000-05: RNCC: 5 | RNVC: 9
2300033-100000-05: RNCC: 5 | RNVC: 9
2300033-100000.05: RNCC: 5 | RNVC: 9
2300033-100000.05: RNCC: 5 | RNVC: 9

26 Nov 1979

5340-12-302-2508
Dust And Moisture Seal Protective Cap

123022508
785703150: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-348-7710
Dust And Moisture Seal Protective Plug

123487710
800X(SIZEDN70): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-040-1232

5340-12-348-7715
Dust And Moisture Seal Protective Plug

123487715
805X(SIZEDN70): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-316-9909
Angle Bracket

123169909
3875015820: RNCC: 3 | RNVC: 2

1 Mar 1989

5340-12-138-0174

5340-12-378-2301
Mounting Plate

123782301
08169793: RNCC: 3 | RNVC: 2
8169793: RNCC: 5 | RNVC: 9

20 Mar 2009

5340-12-197-0741
Webbing Strap

121970741
4359837094: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-314-3654
Mending Plate

123143654
121G10027: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-12-043-3380

5340-12-304-4108
Dust And Moisture Seal Protective Plug

123044108
712562: RNCC: 3 | RNVC: 2
712562: RNCC: 5 | RNVC: 9

12 Jul 1985

5340-12-361-0887
Loop Clamp

123610887
64415210: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-353-8187
Mounting Plate

123538187
506 200 04 39: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-179-5894
Mounting Bracket

121795894
4244280073: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-317-9656
Helical Compression Spring Seat

123179656
PYO-T022: RNCC: 3 | RNVC: 2
98680098062: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-373-0598
Angle Bracket

123730598
DWAB351: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-12-198-3277
Support Hook

121983277
27 0319 220: RNCC: 2 | RNVC: 2
9849658: RNCC: 3 | RNVC: 2
27 0319 220: RNCC: 5 | RNVC: 9
9849658: RNCC: 5 | RNVC: 9
270319220: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-316-5755
Flush Lock

123165755
3296K: RNCC: 3 | RNVC: 2
GSV3296K: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-12-041-9811

5340-12-165-6579
Mending Plate

121656579
4661921: RNCC: 3 | RNVC: 2

11 Jun 1976

5340-12-199-3289
Angle Bracket

121993289
3140721040: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-375-9774
Loop Clamp

123759774
63299A: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-12-150-8438
Resilient Mount

121508438
8339880010: RNCC: 2 | RNVC: 2
735189: RNCC: 3 | RNVC: 2
8339880010: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-346-9196
Nonmetallic Bumper

123469196
93156390: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-12-141-6083

5340-12-094-0927

5340-12-027-0027

5340-12-347-9218
Befestigun Schelle

5340-12-122-6437
Turnbuckle

121226437
4046100250: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-379-3679
Mounting Bracket

123793679
0105863: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-12-387-0272
Block Clamp

123870272
58080176: RNCC: 3 | RNVC: 2
CV190748: RNCC: 5 | RNVC: 2
58080176: RNCC: 5 | RNVC: 2

27 Oct 2011

5340-12-188-3851
Escutcheon Plate

121883851
A0030080293: RNCC: 3 | RNVC: 2
A00030.080.293: RNCC: 5 | RNVC: 2

6 Jul 1981

5340-12-169-1843
Dust And Moisture Seal Protective Cap

121691843
1287406300000: RNCC: 3 | RNVC: 2

20 Apr 1977

5340-12-379-3863
Padlock

123793863
38875: RNCC: 3 | RNVC: 2

17 Jul 2009

5340-12-310-2673
Mending Plate

123102673
2300088-310611.00: RNCC: 2 | RNVC: 2
9851205: RNCC: 3 | RNVC: 2
9851205: RNCC: 5 | RNVC: 9

30 Apr 1987

5340-12-391-4663
Mounting Bracket

123914663
I010845: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-370-3314
Access Cover

123703314
1215 4497: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-12-198-8011
Electrical-Mechanical Equipment Post

121988011
8330750062: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-312-0020
Mending Plate

123120020
01TL12600: RNCC: 3 | RNVC: 2

10 Nov 1987

5340-12-343-3595
Strap Fastener Loop

123433595
4847510032: RNCC: 3 | RNVC: 2

10 Jun 1997

5340-12-044-0578

5340-12-163-3211
Expansion Plug

121633211
4039971020: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-376-8968
Angle Bracket

123768968
160.03.0323: RNCC: 3 | RNVC: 2
300.062.311: RNCC: 5 | RNVC: 2

17 Nov 2008

5340-12-025-0196

5340-12-348-7714
Dust And Moisture Seal Protective Plug

123487714
805X(SIZEDN50): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-196-1165
Nut And Bolt Locking Plate

121961165
8100146-3000-06: RNCC: 2 | RNVC: 2

1 Jun 1983

5340-12-337-8916
Mounting Bracket

123378916
9890429: RNCC: 3 | RNVC: 9
465-068381.001: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-12-302-3486
Dust And Moisture Seal Protective Plug

123023486
03.188: RNCC: 3 | RNVC: 2
03-188: RNCC: 5 | RNVC: 2

19 Dec 1984

5340-12-181-1998
Helical Compression Spring Seat

121811998
809-202-76: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-309-5615
Angle Bracket

123095615
5802255-050000.007: RNCC: 2 | RNVC: 2
5802255-050000.007: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-352-1411
Manual Control Lever

123521411
4171825K: RNCC: 3 | RNVC: 2
5022-021: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-12-372-1315
Helical Compression Spring Seat

123721315
4374-3142 POS 16: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-12-175-5804
Nonmetallic Bumper

121755804
23290-151025.006: RNCC: 2 | RNVC: 2
23290-151025.006: RNCC: 3 | RNVC: 2
23290-151025.006: RNCC: 3 | RNVC: 2
23290-151025.006: RNCC: 3 | RNVC: 2
23290-151025-006: RNCC: 5 | RNVC: 9
23290-151025-006: RNCC: 5 | RNVC: 9
23290-151025.006: RNCC: 5 | RNVC: 9
23290-151025.006: RNCC: 5 | RNVC: 9
23290-151025.006: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-176-7666
Rod End Connector

121767666
1000078-161500.01: RNCC: 2 | RNVC: 2
1000078-161500-01: RNCC: 5 | RNVC: 2
1000078-161500-01: RNCC: 5 | RNVC: 9
1000078-161500-01: RNCC: 5 | RNVC: 9

18 Dec 1978

5340-12-180-6329
Bow Handle

121806329
C381-A27-B84: RNCC: 2 | RNVC: 2
C381A27B84: RNCC: 3 | RNVC: 2
C381-A27-B84: RNCC: 5 | RNVC: 2
C381A27B84: RNCC: 5 | RNVC: 2
C381-A27-B84: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-312-2215
Door Button

123122215
1000-12: RNCC: 3 | RNVC: 2
0.20.0554.0: RNCC: 3 | RNVC: 2
200-0434: RNCC: 3 | RNVC: 2

4 Dec 1987

5340-12-304-6563
Elastic Cord Assembly

123046563
3505/180CM: RNCC: 3 | RNVC: 2
BEG5340-12-304-6563: RNCC: 3 | RNVC: 2
JD5340-12-304-6563: RNCC: 5 | RNVC: 2

12 Aug 1985

5340-12-370-8999
Handwheel

123708999
SK778M6-236560.000.0: RNCC: 3 | RNVC: 2
4617500160: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-12-346-9488
Loop Clamp

123469488
VG95211-ML-123469488: RNCC: 2 | RNVC: 2
P76795-1: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-12-702-3890
Threaded End Tensioning Tie Rod

127023890
VG95211-ML-127023890: RNCC: 2 | RNVC: 2
5.12.5111.3720.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-174-2931
Retaining Strap

121742931
23223-060000-23-0: RNCC: 2 | RNVC: 2
23223-060000-23-0: RNCC: 5 | RNVC: 2
23223-060000.23.0: RNCC: 5 | RNVC: 2
23223-060000.23.0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-304-1595
Dust And Moisture Seal Protective Plug

123041595
251807140: RNCC: 3 | RNVC: 9

18 Jun 1985

5340-12-337-4427
Strap Bolt

123374427
10 0067 383: RNCC: 3 | RNVC: 2
10 0067 380: RNCC: 5 | RNVC: 2
100067380: RNCC: 5 | RNVC: 2
0007430369: RNCC: 5 | RNVC: 2

6 Mar 1995

5340-12-169-2041
Angle Bracket

121692041
CF 446 673: RNCC: 2 | RNVC: 2
CF 446 673: RNCC: 3 | RNVC: 2
CF 446 673: RNCC: 5 | RNVC: 2
CF446673: RNCC: 5 | RNVC: 2
CF 446 673: RNCC: 5 | RNVC: 2
CF446673: RNCC: 5 | RNVC: 2
CF446673: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-192-1517
Mending Plate

121921517
4379028: RNCC: 3 | RNVC: 2
437.9028: RNCC: 5 | RNVC: 2

29 Mar 1982

5340-12-347-9470
Nonmetallic Bumper

123479470
5000566: RNCC: 3 | RNVC: 2

16 Mar 1999

5340-12-356-3276
Dust And Moisture Seal Protective Plug

123563276
300V35: RNCC: 3 | RNVC: 2
GPN300V35: RNCC: 5 | RNVC: 2

14 Feb 2002

5340-12-195-3398
Retaining Strap

121953398
81619400032: RNCC: 3 | RNVC: 2
81.61940.0032: RNCC: 5 | RNVC: 2
5000274452: RNCC: 5 | RNVC: 2
5000274452: RNCC: 5 | RNVC: 9

8 Feb 1983

5340-12-382-2526
Access Cover

123822526
S433M1151210: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-306-7018
Retaining Strap

123067018
2142163: RNCC: 3 | RNVC: 2
2955-PG16: RNCC: 5 | RNVC: 2

21 Mar 1986

5340-12-361-0810
Mounting Bracket

123610810
JN1138B02: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-197-3384
Case Corner

121973384
1G0248: RNCC: 3 | RNVC: 2
0008990318: RNCC: 5 | RNVC: 2

13 Oct 1983

5340-12-183-2519
Retaining Strap

121832519
51974010372: RNCC: 3 | RNVC: 2
5000498411: RNCC: 5 | RNVC: 2
5000498411: RNCC: 5 | RNVC: 9

28 Mar 1980

5340-12-300-3503
Screw Hook

123003503
4049370376: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-021-5942

5340-12-303-8992
Rod End Clevis

123038992
3974465500: RNCC: 3 | RNVC: 2
519460: RNCC: 5 | RNVC: 9

15 May 1985

5340-12-356-1910
Mounting Bracket

123561910
T342M3001102: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-328-6734
Spring Tension Clip

123286734
012141741: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-306-1599
Access Cover

123061599
632-160300.01.3: RNCC: 3 | RNVC: 2

31 Jan 1986

5340-12-330-1509
Loop Clamp

123301509
DIN3016-G1-133X25-W1-2: RNCC: 2 | RNVC: 2
SP133/25SK-W1: RNCC: 3 | RNVC: 2
DIN3016-G1-133X25-W1-2: RNCC: 3 | RNVC: 2
0047797: RNCC: 5 | RNVC: 2
8433954: RNCC: 5 | RNVC: 2
SP133/25SK: RNCC: 5 | RNVC: 2

10 Nov 1992

5340-12-196-2555
Clamping Catch

121962555
V951L03-1-1AF: RNCC: 3 | RNVC: 2
51L3-1-1AA: RNCC: 5 | RNVC: 2
40121300: RNCC: 5 | RNVC: 2

20 Jun 1983

5340-12-390-7160
Angle Bracket

123907160
SK1171-192480.001.0: RNCC: 3 | RNVC: 2
7116860: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-12-167-3349
Resilient Mount

121673349
1204100100: RNCC: 3 | RNVC: 2
UMA,453/942,AMAGNETISCH,U24A: RNCC: 5 | RNVC: 2
U24AMAGNETISCH: RNCC: 5 | RNVC: 9
UMA,INDEX453/942AMAGNETISCH: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-387-0341
Corner Brace

123870341
5802017-719300.03: RNCC: 2 | RNVC: 2
5802017-719300.03: RNCC: 3 | RNVC: 2

27 Oct 2011

5340-12-093-6806

5340-12-370-7524
Rod End Locking Retainer

123707524
095334418-0: RNCC: 3 | RNVC: 2
66 000 000 016: RNCC: 5 | RNVC: 2

18 Dec 2006

5340-12-180-7368
Retaining Strap

121807368
0287 6503: RNCC: 3 | RNVC: 2
2876503: RNCC: 5 | RNVC: 2
2876503ED0704-79: RNCC: 5 | RNVC: 2

1 Oct 1979

5340-12-325-8993
Loop Clamp

123258993
3960940021: RNCC: 3 | RNVC: 2

19 Jul 1991

5340-12-191-3455
Retaining Strap

121913455
496.6021: RNCC: 3 | RNVC: 2
4966021: RNCC: 5 | RNVC: 2

26 Jan 1982

5340-12-374-5962
Dust And Moisture Seal Protective Cap-Plug

123745962
5410015: RNCC: 3 | RNVC: 2

28 Feb 2008

5340-12-358-7753
Mounting Plate

123587753
EZ154307: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-043-3325

5340-12-314-5431
Angle Bracket

123145431
6204300110: RNCC: 3 | RNVC: 2
620 430 01 10: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-090-6987

5340-12-043-2720

5340-12-165-4739
Manual Control Handle

121654739
1482020013: RNCC: 3 | RNVC: 2

18 May 1976

5340-12-178-7685
Mounting Bracket

121787685
C119-A2-C71: RNCC: 2 | RNVC: 2
C119-A2-C71: RNCC: 3 | RNVC: 2
C119-A2-C71: RNCC: 5 | RNVC: 2
C119A2C71: RNCC: 5 | RNVC: 2
C119A2C71: RNCC: 5 | RNVC: 9

16 May 1979

5340-12-387-4474
Swivel Caster

123874474
712200: RNCC: 3 | RNVC: 2

16 Dec 2011

5340-12-311-7297
Access Cover

123117297
272.309.853: RNCC: 3 | RNVC: 2
272.309 853: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-12-385-7703
Mounting Plate

123857703
5561532641: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-12-377-4738
Mounting Plate

123774738
5500784541: RNCC: 3 | RNVC: 2

19 Jan 2009

5340-12-319-7657
Access Cover

123197657
8450412300: RNCC: 3 | RNVC: 2
84504 12300: RNCC: 5 | RNVC: 9

2 Nov 1989

5340-12-326-8158
Webbing Strap

123268158
4063-977: RNCC: 3 | RNVC: 2

29 Oct 1991

5340-12-151-2302
Helical Compression Spring Seat

121512302
1300F23021: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-330-1850
Nonmetallic Bumper

123301850
26007790: RNCC: 3 | RNVC: 2
26002490: RNCC: 5 | RNVC: 9

12 Nov 1992

5340-12-360-0965
Bow Handle

123600965
9418800020: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-327-8720
Mounting Bracket

123278720
2653-970010.00: RNCC: 2 | RNVC: 2
2653-970010.00: RNCC: 3 | RNVC: 2

14 Mar 1992

5340-12-362-8517
Mounting Plate

123628517
51-51723: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-020-5128

5340-12-339-0502
Angle Bracket

123390502
4618202614: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-392-8632
Mounting Bracket

123928632
0101710000: RNCC: 3 | RNVC: 2

17 Jul 2013

5340-12-317-1966
Retaining Band

123171966
51061405030: RNCC: 3 | RNVC: 2
51.06140.5030: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-196-0376
Lock-Release Lever

121960376
SK1201: RNCC: 3 | RNVC: 2
02968481: RNCC: 5 | RNVC: 2
SK1201: RNCC: 5 | RNVC: 2

18 May 1983

5340-12-180-6646
Access Cover

121806646
0288 8045: RNCC: 3 | RNVC: 2
2888045: RNCC: 5 | RNVC: 2
2888045ED0695-78: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-330-4221
Butt Hinge

123304221
100054334: RNCC: 3 | RNVC: 2
10 0054 334: RNCC: 5 | RNVC: 2

11 Dec 1992

5340-12-319-6671
Retaining Strap

123196671
5359301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-025-9819

5340-12-387-8488
Retaining Clip

123878488
7093891: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-164-5072
Retaining Strap

121645072
113072602: RNCC: 3 | RNVC: 2
E113072602: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-7125
Retaining Strap

123227125
LPR5006: RNCC: 3 | RNVC: 2
5006: RNCC: 5 | RNVC: 2
435.07.0005: RNCC: 5 | RNVC: 2

14 Sep 1990

5340-12-301-6082
Angle Bracket

123016082
2300107-370000.10: RNCC: 2 | RNVC: 2
2300107-370000.10: RNCC: 3 | RNVC: 2
2300107-370000.10: RNCC: 5 | RNVC: 9
2300107-370000.10: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-328-6294
Clamping Catch

123286294
112L31-2X2AA: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-327-5092
Angle Bracket

123275092
6309399: RNCC: 3 | RNVC: 2
630.9399: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-12-391-4705
Retaining Strap

123914705
I010079: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-348-8544
Access Cover

123488544
2300387-660341.001: RNCC: 2 | RNVC: 2
2300387-660341.001: RNCC: 3 | RNVC: 2
2300387-660341.001: RNCC: 5 | RNVC: 9

27 Aug 1999

5340-12-132-9440

5340-12-305-6101
Mending Plate

123056101
503993: RNCC: 3 | RNVC: 2

27 Nov 1985

Load More Results