What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 50 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 50 of 178

5340-12-359-1937
Mounting Bracket

123591937
9414298240: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-390-4722
Dust And Moisture Seal Protective Cap

123904722
4253204: RNCC: 3 | RNVC: 2
4253204: RNCC: 5 | RNVC: 2

15 Nov 2012

5340-12-350-4827
Nonmetallic Bumper

123504827
12072502: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-12-318-5835
Dust And Moisture Seal Protective Plug

123185835
31201000: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-354-6338
Cushioning Pad

123546338
7354101000: RNCC: 3 | RNVC: 2

9 Aug 2001

5340-12-372-9905
Hasp Staple

123729905
02.0925.01: RNCC: 3 | RNVC: 2

13 Sep 2007

5340-12-170-1108
Helical Compression Spring Seat

121701108
1000042-112500.04: RNCC: 3 | RNVC: 2
1000042-112500-04: RNCC: 5 | RNVC: 2

27 Jun 1977

5340-12-347-7950
Blank Panel

123477950
2300002-062245.000: RNCC: 2 | RNVC: 2
9916634: RNCC: 3 | RNVC: 2
2300002-062245.000: RNCC: 5 | RNVC: 2
2300002-062245.000: RNCC: 5 | RNVC: 9
9916634: RNCC: 5 | RNVC: 9

10 Feb 1999

5340-12-356-0496
Mounting Bracket

123560496
2339-630016A00C: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-362-7974
Mounting Bracket

123627974
0000.343359: RNCC: 3 | RNVC: 2
88 8110.0547: RNCC: 5 | RNVC: 2

1 Apr 2004

5340-12-328-6733
Nonmetallic Bumper

123286733
701121276B: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-360-0458
Mounting Bracket

123600458
9416800514: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-185-0791
Clamp Bolt Assembly

121850791
5498874: RNCC: 3 | RNVC: 2

9 Sep 1980

5340-12-329-9696
Double Angle Bracket

123299696
1000042-194620.07: RNCC: 3 | RNVC: 2

16 Oct 1992

5340-12-360-6041
Seal Retaining Plate

123606041
NN31407P02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-12-173-4626
Retaining Strap

121734626
021905119: RNCC: 3 | RNVC: 2

18 Apr 1978

5340-12-364-1460
Bow Handle

123641460
368855: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-12-368-2995
Friction Catch

123682995
1346: RNCC: 3 | RNVC: 2
63140030: RNCC: 5 | RNVC: 2

13 Feb 2006

5340-12-022-6535

5340-12-379-9386
Retaining Bail

123799386
1554030: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-360-7822
Buckle

123607822
08000972: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-12-388-7933
Dust And Moisture Seal Protective Plug

123887933
2312-1021: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-352-2636
Access Cover

123522636
5205912: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-348-7713
Dust And Moisture Seal Protective Plug

123487713
805X(SIZEDN40): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-380-3840
Mounting Bracket

123803840
4258900114: RNCC: 3 | RNVC: 2

26 Oct 2009

5340-12-334-3707
Access Cover

123343707
272.1329.11-02: RNCC: 3 | RNVC: 2

2 May 1994

5340-12-171-8391
Dust And Moisture Seal Protective Plug

121718391
TL2-204: RNCC: 3 | RNVC: 2

22 Nov 1977

5340-12-363-6766
Retaining Clamp Assembly

123636766
4638800193: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-300-0890
Mending Plate

123000890
0289 0542: RNCC: 3 | RNVC: 2
2890542: RNCC: 5 | RNVC: 2
2890542KZ0693-79: RNCC: 5 | RNVC: 2

30 Jun 1984

5340-12-305-5625
Retaining Strap

123055625
400780: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-090-6584

5340-12-324-6842
Mending Plate

123246842
52820-W21.05: RNCC: 3 | RNVC: 2

15 Mar 1991

5340-12-197-0760
Door Button

121970760
4355900087: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-354-5389
Quick Release Plunger

123545389
04454.B8: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-333-2437
Flush Lock

123332437
160-73326-19: RNCC: 3 | RNVC: 2
15160-73326.19: RNCC: 5 | RNVC: 2
160-73326-19: RNCC: 5 | RNVC: 9

12 Nov 1993

5340-12-366-5697
Spring Tension Clip

123665697
223.70.016: RNCC: 3 | RNVC: 2

10 May 2005

5340-12-363-5033
Mounting Bracket

123635033
T947M4011102: RNCC: 2 | RNVC: 2
T947M4011102: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-362-9636
Mounting Bracket

123629636
504.170: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-12-320-5175
Nonmetallic Bumper

123205175
5801411-607: RNCC: 3 | RNVC: 2

23 Jan 1990

5340-12-351-5185
Mechanic Equipment Hardware Kit

123515185
7802769350: RNCC: 3 | RNVC: 2
78027 69350: RNCC: 5 | RNVC: 9

1 Aug 2000

5340-12-316-6754
Access Cover

123166754
5800777-8540: RNCC: 2 | RNVC: 2
5800777-8540: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-387-3554
Angle Bracket

123873554
5241534440: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-300-7964
Retaining Strap

123007964
23114-2405.59: RNCC: 2 | RNVC: 2
23114-2405.59: RNCC: 3 | RNVC: 2
23114-2405-59: RNCC: 5 | RNVC: 9
23114-2405.59: RNCC: 5 | RNVC: 9
23114-2405-59: RNCC: 5 | RNVC: 9
23114-2405.59: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-160-0317
Casement Fastener

121600317
6000129: RNCC: 3 | RNVC: 2
2638-406: RNCC: 5 | RNVC: 2
2638406: RNCC: 5 | RNVC: 2
166-2533: RNCC: 5 | RNVC: 2
43710: RNCC: 5 | RNVC: 2
166-2533: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-138-0476
Butt Hinge

121380476
2638-219: RNCC: 3 | RNVC: 2
2638219: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-335-8462
Lock-Release Lever

123358462
4900401-411241.00: RNCC: 2 | RNVC: 2
4900401-411241.00: RNCC: 3 | RNVC: 2

22 Sep 1994

5340-12-310-7272
Retaining Strap

123107272
4900278-202000.08: RNCC: 2 | RNVC: 2
4900278-202000.08: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-12-320-1012
Access Cover

123201012
C145-A11-C22: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-193-4363
Resilient Mount

121934363
2K2-BAM-60-G1: RNCC: 3 | RNVC: 2
95-75738: RNCC: 5 | RNVC: 2
331933468: RNCC: 5 | RNVC: 2
2K2-BAM-60-G1: RNCC: 5 | RNVC: 9
2K2BAM60G1: RNCC: 5 | RNVC: 9

21 Jul 1982

5340-12-323-1132
Angle Bracket

123231132
509473: RNCC: 3 | RNVC: 2
509473: RNCC: 5 | RNVC: 2
509473: RNCC: 5 | RNVC: 9

24 Oct 1990

5340-12-324-7062
Access Door

123247062
CF 454 473 AE: RNCC: 2 | RNVC: 2
CF 454 473 AE: RNCC: 3 | RNVC: 2
CF 454 473 AE: RNCC: 5 | RNVC: 2
CF 324 674 AZ: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-12-312-2856
Rod End Connector

123122856
281955317: RNCC: 3 | RNVC: 2
81.26411.0083: RNCC: 5 | RNVC: 2
81264110083: RNCC: 5 | RNVC: 2

11 Dec 1987

5340-12-326-5088
Mounting Bracket

123265088
5802017-713200.00: RNCC: 2 | RNVC: 2
5802017-713200.00: RNCC: 3 | RNVC: 2

26 Sep 1991

5340-12-352-6744
Mounting Bracket

123526744
14051201: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-332-1288
Rim Lock

123321288
1H0823509: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-010-4322

5340-12-161-1377
Retaining Strap

121611377
160-70262: RNCC: 3 | RNVC: 2
160-70262: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-374-1489
Mounting Bracket

123741489
153 6150-602: RNCC: 3 | RNVC: 2
153 6150-602: RNCC: 5 | RNVC: 2

23 Jan 2008

5340-12-353-3936
Mechanical Stop

123533936
CBD30099P02: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-351-3841
Spring Tension Clip

123513841
10063-313300.03: RNCC: 3 | RNVC: 2
10063-313300.03: RNCC: 5 | RNVC: 9

20 Jul 2000

5340-12-383-4950
Mounting Bracket

123834950
10903: RNCC: 3 | RNVC: 2

28 Oct 2010

5340-12-374-3164
Angle Bracket

123743164
2 0013-628: RNCC: 3 | RNVC: 2
2 0013-628: RNCC: 5 | RNVC: 2

7 Feb 2008

5340-12-192-8507
Webbing Strap

121928507
C2311-8-4187.00: RNCC: 2 | RNVC: 2
8-4187.00: RNCC: 2 | RNVC: 2
8-4187.00: RNCC: 3 | RNVC: 2
8-4187.00: RNCC: 5 | RNVC: 9
8-4187-00: RNCC: 5 | RNVC: 9
8-4187.00: RNCC: 5 | RNVC: 9
000-A3-25X2,0X850-PE-RAL6031: RNCC: 6 | RNVC: 9

27 May 1982

5340-12-371-4645
Mending Plate

123714645
23302-033000.07: RNCC: 2 | RNVC: 2
23302-033000.07: RNCC: 3 | RNVC: 2
2133013: RNCC: 5 | RNVC: 2
4-2133-013: RNCC: 5 | RNVC: 2

3 Apr 2007

5340-12-168-2378
Mending Plate

121682378
WW410664B: RNCC: 3 | RNVC: 2
WW410664B: RNCC: 5 | RNVC: 2
WW 410 664 B: RNCC: 5 | RNVC: 2
WW410664B: RNCC: 5 | RNVC: 2

28 Feb 1977

5340-12-179-7035
Loop Clamp

121797035
81637310047: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-025-3157

5340-12-341-0400
Door Button

123410400
17120: RNCC: 3 | RNVC: 9

19 Jul 1996

5340-12-302-6882
Spring Tension Clip

123026882
6290: RNCC: 3 | RNVC: 2
6291: RNCC: 3 | RNVC: 2
95.499: RNCC: 5 | RNVC: 2

23 Jan 1985

5340-12-142-3754

5340-12-305-8455
Retaining Strap

123058455
127-01/72452: RNCC: 3 | RNVC: 2
127-01/72452: RNCC: 5 | RNVC: 9

23 Dec 1985

5340-12-195-6973
Mending Plate

121956973
5800043-3200.01: RNCC: 3 | RNVC: 2
5800043-3200-01: RNCC: 5 | RNVC: 2
5800043-3200.01: RNCC: 5 | RNVC: 9
5800043-3200-01: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-165-2318
Retaining Strap

121652318
DIN72571-1X4-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72571-1X4-ST-VERZINKT: RNCC: 3 | RNVC: 2
BSL1X4/72571VPE: RNCC: 3 | RNVC: 2
5108980104: RNCC: 5 | RNVC: 2
DIN72571-1X4-ST-VERZINKT: RNCC: 5 | RNVC: 2
15210003: RNCC: 5 | RNVC: 2
15210003: RNCC: 5 | RNVC: 2
1X4DIN72571STVERZINKT: RNCC: 5 | RNVC: 2
DIN72571-1X4-ST-GALZN8: RNCC: 5 | RNVC: 2
030709: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-300-2171
Nut And Bolt Locking Plate

123002171
23114-2805.21: RNCC: 2 | RNVC: 2
23114-2805.21: RNCC: 3 | RNVC: 2
23114-2805-21: RNCC: 5 | RNVC: 9
23114-2805.21: RNCC: 5 | RNVC: 9
23114-2805-21: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-177-1359
Angle Bracket

121771359
5800822-111-005: RNCC: 3 | RNVC: 2
5800822-111.005: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-179-1788
Halter

121791788
5801113-111101-005: RNCC: 3 | RNVC: 2
5801113-111101.005: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-361-6989
Angle Bracket

123616989
J92228252-003: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-12-126-3414

5340-12-192-3023
Loop Clamp

121923023
1154600022: RNCC: 3 | RNVC: 2

13 Apr 1982

5340-12-301-9949
Catch Strike

123019949
3816200067: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-315-9875
Mounting Bracket

123159875
2996.51.16: RNCC: 3 | RNVC: 2

13 Dec 1988

5340-12-358-5286
Retaining Band

123585286
6174700440: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-371-5823
Retaining Clip

123715823
T881M4033209: RNCC: 2 | RNVC: 2
T881M4033209: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-158-4968
Bow Handle

121584968
00155426.00: RNCC: 3 | RNVC: 2
KF0155426: RNCC: 3 | RNVC: 2
0015.5426.00: RNCC: 5 | RNVC: 2
ZBB11031: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-0792
Helical Compression Spring Seat

123190792
H04500: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-12-317-0500
Access Cover

123170500
3123371130: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-383-4213
Hand Crank

123834213
76113: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-12-317-4301
Lock-Release Lever

123174301
3224300024: RNCC: 3 | RNVC: 2

6 Apr 1989

5340-12-389-4559
Access Cover

123894559
5840103035: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-361-7721
Access Cover

123617721
5354-61: RNCC: 3 | RNVC: 2
5354-61: RNCC: 3 | RNVC: 9

17 Nov 2003

5340-12-391-4229
Vent Plug

123914229
I000344: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-381-2949
Mounting Plate

123812949
424-04-K5V: RNCC: 3 | RNVC: 2
4250473100325: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-185-7649
Resilient Mount

121857649
DIN95363-A15X8-M4X6-M4X10-NR40S: RNCC: 2 | RNVC: 2
278-556: RNCC: 5 | RNVC: 2
500012-M4X6-M4X10.NR40.ST: RNCC: 5 | RNVC: 2
1002-1500-0202: RNCC: 5 | RNVC: 2
0008350494: RNCC: 5 | RNVC: 2
VG95363-A15X8-M4X6-M4X10-NR40ST: RNCC: 5 | RNVC: 9

30 Oct 1980

5340-12-195-8771
Butt Hinge Leaf

121958771
100109-6097: RNCC: 2 | RNVC: 2
100109-6097: RNCC: 3 | RNVC: 2
100109-6097: RNCC: 5 | RNVC: 2
100109-6097: RNCC: 5 | RNVC: 9

26 Apr 1983

5340-12-308-5301
Plug Button

123085301
040-4210: RNCC: 3 | RNVC: 2

21 Oct 1986

5340-12-164-5061
Clamping Catch

121645061
HAUBENHALTER 107A: RNCC: 3 | RNVC: 2
161393401: RNCC: 5 | RNVC: 2
107A: RNCC: 5 | RNVC: 2
6020022: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-8532
Access Cover

123658532
04095210: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-357-8815
Mounting Bracket

123578815
2300042-255240.017: RNCC: 2 | RNVC: 2
2300042-255240.017: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-12-159-1964
Dust And Moisture Seal Protective Cap

121591964
344011212: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-339-3041
Nonmetallic Bumper

123393041
3964128: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-12-143-0071

5340-12-136-5769

5340-12-300-2129
Flare Lock Fastener

123002129
0049881378: RNCC: 3 | RNVC: 2
255-1760-0010: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-316-6615
Double Angle Bracket

123166615
51123400022: RNCC: 3 | RNVC: 2
51123400022: RNCC: 3 | RNVC: 2
51.12340-0022: RNCC: 5 | RNVC: 2
51.12340-0022: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-367-5394
Extension Drawer Slide

123675394
DZ0301-0024: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-384-4253
Access Door Hinge

123844253
F1.1189-30-20-10.12-00: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-328-9587
Spring Tension Clip

123289587
DIN20043-KA3-12: RNCC: 2 | RNVC: 2
150103: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-092-2466

5340-12-092-3002

5340-12-349-8738
Access Cover

123498738
105-610311: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-12-356-1453
Dust And Moisture Seal Boot

123561453
2012950583: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-329-1089
Flush Lock

123291089
0007203335: RNCC: 3 | RNVC: 9

18 Jul 1992

5340-12-311-0025
Access Cover

123110025
78203 46400: RNCC: 2 | RNVC: 2
7820346400: RNCC: 3 | RNVC: 2
78203 46400: RNCC: 5 | RNVC: 9

16 Jul 1987

5340-12-362-3204
Shock Mount Pad

123623204
7226128: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-366-5376
Butt Hinge Leaf

123665376
10138912: RNCC: 3 | RNVC: 2

4 May 2005

5340-12-300-3649
Spring Tension Clip

123003649
KK11385ZIB/C.: RNCC: 3 | RNVC: 2
0009883478: RNCC: 5 | RNVC: 2
11385ZIB/C: RNCC: 5 | RNVC: 2

27 Jul 1984

5340-12-330-8228
Detent Plunger

123308228
DIN6311-S32-A3P: RNCC: 2 | RNVC: 2
S32DIN6311-VERZINKT: RNCC: 5 | RNVC: 2

12 Feb 1993

5340-12-383-8056
Lock-Release Lever

123838056
03-200.00-02.10-00: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-12-351-2164
Helical Compression Spring Retainer

123512164
3099-00-042000.08: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-342-6172
Pawl Fastener

123426172
U100-3362-000: RNCC: 2 | RNVC: 2
U100-3362-000: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-356-5082
Angle Bracket

123565082
J92220314-003: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-188-2631
Mending Plate

121882631
4312 712 20650: RNCC: 3 | RNVC: 2
431271220650: RNCC: 5 | RNVC: 2
5801685-121000.04: RNCC: 5 | RNVC: 9
5801685-121000-04: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-027-7414

5340-12-339-0494
Mounting Bracket

123390494
4602840628: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-339-0511
Double Angle Bracket

123390511
4618993614: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-170-5225
Loop Clamp

121705225
HNY13V: RNCC: 3 | RNVC: 2
211-65139: RNCC: 5 | RNVC: 2
203013101: RNCC: 5 | RNVC: 9

20 Jul 1977

5340-12-330-4786
Retaining Strap

123304786
5559952168: RNCC: 3 | RNVC: 2
5509952768: RNCC: 5 | RNVC: 2
5559952168: RNCC: 5 | RNVC: 2
5509952768: RNCC: 5 | RNVC: 2
5559952168: RNCC: 5 | RNVC: 2
5509952768: RNCC: 5 | RNVC: 9
5559951068: RNCC: 5 | RNVC: 9

19 Dec 1992

5340-12-321-1639
Access Cover

123211639
03842801: RNCC: 3 | RNVC: 2

6 Apr 1990

5340-12-358-7667
Multiple Angle Bracket

123587667
9412689340: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-358-9620
Mounting Plate

123589620
2300074-4128.05: RNCC: 2 | RNVC: 2
2300074-4128.05: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-358-9659
Mounting Bracket

123589659
T947M4005205: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-353-0304
Access Cover

123530304
1216 3429: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-326-4379
Loop Clamp

123264379
6204920940: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-193-9388
Loop Clamp

121939388
160-766093: RNCC: 3 | RNVC: 2
160-766093: RNCC: 5 | RNVC: 9

15 Sep 1982

5340-12-305-6119
Mending Plate

123056119
377979: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-315-1460
Support Hook

123151460
820303006: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-12-310-9385
Access Cover

123109385
2300227-321800.000: RNCC: 2 | RNVC: 2
2300227-321800.000: RNCC: 3 | RNVC: 2
2300227-321800.000: RNCC: 5 | RNVC: 9

10 Jul 1987

5340-12-180-3146
Escutcheon Plate

121803146
01231324: RNCC: 3 | RNVC: 2
1231324EE8934-17: RNCC: 5 | RNVC: 2
N92063Y2: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-155-9116
Friction Catch Stud

121559116
100297-2320: RNCC: 3 | RNVC: 2
100297-2320: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-2594
Angle Bracket

123022594
6204292540: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-346-9355
Mounting Bracket

123469355
049492: RNCC: 3 | RNVC: 2
SH2: RNCC: 5 | RNVC: 2

29 Sep 1998

5340-12-315-3058
Mounting Bracket

123153058
6245400473: RNCC: 3 | RNVC: 2
624 540 04 73: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-310-8918
Resilient Mount

123108918
RU51876: RNCC: 3 | RNVC: 2

7 Jul 1987

5340-12-356-3245
Loop Clamp

123563245
167.061.004: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-328-1569
Access Cover

123281569
4609301335: RNCC: 3 | RNVC: 2

11 Apr 1992

5340-12-330-4054
Spring Tension Clip

123304054
4200069-105500.03: RNCC: 3 | RNVC: 2
4200069-105500.03: RNCC: 5 | RNVC: 9

11 Dec 1992

5340-12-353-6879
Angle Bracket

123536879
J92224244-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-371-3229
Lock-Release Lever

123713229
NYX-DG-0809-11: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-364-7780
Mechanic Equipment Hardware Kit

123647780
2339-090040A00C: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-316-0021
Angle Bracket

123160021
C22107-A202-C75: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-168-2779
Loop Clamp

121682779
LN9491B15: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-350-5927
Access Cover

123505927
54.1038.062.02: RNCC: 2 | RNVC: 2
54.1038.062.02: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-352-2825
Blank Panel

123522825
6278201: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-12-044-4686

5340-12-371-9100
Mounting Bracket

123719100
0004226-049: RNCC: 2 | RNVC: 2
0004226-049: RNCC: 3 | RNVC: 2

29 May 2007

5340-12-310-7829
Resilient Mount

123107829
22420 24002: RNCC: 2 | RNVC: 2
996 001 02: RNCC: 3 | RNVC: 2
BDL 22420 24002: RNCC: 3 | RNVC: 2
BDL 22420 24002: RNCC: 3 | RNVC: 2
BDL 22420 24002: RNCC: 5 | RNVC: 2
996 001 02: RNCC: 5 | RNVC: 2
2242024002: RNCC: 5 | RNVC: 2
PDG2-S1: RNCC: 5 | RNVC: 9
996 001 01: RNCC: 5 | RNVC: 9
22420 24002: RNCC: 5 | RNVC: 9

30 Jun 1987

5340-12-347-9216
Befestigun Schelle

5340-12-347-9793
Karabiner- Haken

5340-12-389-7186
Sp Reeling Machine

123897186
1801.G.K.0: RNCC: 3 | RNVC: 2

16 Aug 2012

5340-12-188-7072
Dust And Moisture Seal Protective Plug

121887072
700M10 FORM B: RNCC: 3 | RNVC: 2
701001000: RNCC: 5 | RNVC: 2
M10GPN700FORMB: RNCC: 5 | RNVC: 2
GPN700,M10 FORM B: RNCC: 5 | RNVC: 2
GPN700,M10FORMB: RNCC: 5 | RNVC: 2
GPN700BM10: RNCC: 5 | RNVC: 2

27 Jul 1981

5340-12-368-8232
T Bracket

123688232
1600-990120.000.0: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-12-142-8781
Retaining Strap

121428781
8380780741: RNCC: 3 | RNVC: 2
600465: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-370-9595
Mounting Plate

123709595
881.902-4: RNCC: 2 | RNVC: 2
881.902-4: RNCC: 3 | RNVC: 2

22 Jan 2007

5340-12-354-1344
Clamping Catch

123541344
1429L02-2-1AG: RNCC: 3 | RNVC: 2

8 Jun 2001

5340-12-307-7034
Mending Plate

123077034
RP981711/2: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-186-5860
Spring Tension Clip

121865860
C22234-A1000-C76: RNCC: 3 | RNVC: 2
C22099A688C816: RNCC: 5 | RNVC: 2
C22099-A688-C816: RNCC: 5 | RNVC: 9
C22234A1000C76: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-363-1971
Loop Clamp

123631971
HRGKSM1R146-154/151STMUISO10511: RNCC: 3 | RNVC: 2

12 May 2004

5340-12-197-4074
Support Hook

121974074
5801807-1000.04: RNCC: 2 | RNVC: 2
5801807-1000-04: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-370-6893
Access Door Hinge

123706893
365/1611-37-05-00: RNCC: 3 | RNVC: 2
H22064: RNCC: 5 | RNVC: 2

11 Dec 2006

5340-12-349-2384
Retaining Band

123492384
245/9713-17-10-00: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-12-379-9442
Retaining Strap

123799442
000000004912: RNCC: 3 | RNVC: 2
DIN1593-19 DBL8451.16: RNCC: 5 | RNVC: 2

15 Sep 2009

5340-12-326-8456
Mending Plate

123268456
6600133-111131.06: RNCC: 2 | RNVC: 2
6600133-111131.06: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-341-4033
Resilient Mount

123414033
1221/2141-01-10-01: RNCC: 3 | RNVC: 2
1221/2141-01-10-01: RNCC: 3 | RNVC: 2
1221/2141-01-10-01: RNCC: 5 | RNVC: 2
36/01/2141-01-10-01: RNCC: 5 | RNVC: 2

31 Aug 1996

5340-12-166-8782
Retaining Strap

121668782
5800748-11.008: RNCC: 3 | RNVC: 2
5800748-11-008: RNCC: 5 | RNVC: 9

27 Oct 1976

5340-12-151-4076
Spring Tension Clip

121514076
23111-1136.00: RNCC: 2 | RNVC: 2
23111-1136.00: RNCC: 3 | RNVC: 2
1123623: RNCC: 5 | RNVC: 2
23111-1136-00: RNCC: 5 | RNVC: 2
1123623: RNCC: 5 | RNVC: 9
23111-1136-00: RNCC: 5 | RNVC: 9
23111-1136-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-330-6655
Mending Plate

123306655
1838801: RNCC: 3 | RNVC: 2

25 Jan 1993

5340-12-168-3277
Casement Fastener

121683277
103502301: RNCC: 3 | RNVC: 2
D103502301: RNCC: 5 | RNVC: 2

7 Mar 1977

5340-12-348-2814
Nonmetallic Bumper

123482814
874 514 44: RNCC: 3 | RNVC: 2

21 May 1999

5340-12-131-5590

5340-12-392-3550
Cushioning Pad

123923550
7000137: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-128-6727

5340-12-367-1922
Butt Hinge

123671922
S252M3170211: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-177-9290
Electrical-Mechanical Equipment Post

121779290
51904460005: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-368-2348
Rod End Clevis

123682348
000000.296727: RNCC: 3 | RNVC: 2
47.9990.6025: RNCC: 5 | RNVC: 2

12 Jan 2006

5340-12-302-1360
Butt Hinge Leaf

123021360
4593036131: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-322-2347
Double Angle Bracket

123222347
54.3050.000.08: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-377-1730
Suction Cup

123771730
BO CZS001: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-180-0477
Escutcheon Plate

121800477
403197660012: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-360-0981
Shock Mount Pad

123600981
9423172112: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-357-8913
Double Angle Bracket

123578913
2300042-255260.003: RNCC: 2 | RNVC: 2
2300042-255260.003: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-321-2289
Pipe Bracket

123212289
1531316005: RNCC: 3 | RNVC: 2

20 Apr 1990

5340-12-094-2003

5340-12-094-1844

5340-12-363-5202
Mounting Bracket

123635202
T214M1001102: RNCC: 2 | RNVC: 2
T214M1001102: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-702-2444
Angle Bracket

127022444
VG95211-ML-127022444: RNCC: 2 | RNVC: 2
30.7715.51: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-159-9052
Retaining Strap

121599052
C39281A1C59: RNCC: 3 | RNVC: 2
C39281-A1-C59: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-9136
Nonmetallic Bumper

123289136
XB378/207: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-311-8979
Dust And Moisture Seal Protective Cap

123118979
166031: RNCC: 2 | RNVC: 2
166031: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-12-308-5939
Spring Loaded Cylinder Fastener

123085939
5800.6024: RNCC: 3 | RNVC: 2
G003909: RNCC: 5 | RNVC: 2

28 Oct 1986

5340-12-300-3135
Double Angle Bracket

123003135
3098171463: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-363-5802
Angle Bracket

123635802
0242 3357: RNCC: 3 | RNVC: 2
571276477: RNCC: 5 | RNVC: 2

6 Jul 2004

5340-12-307-5620

5340-12-372-5130
Dust And Moisture Seal Protective Cap

123725130
28200160033/0: RNCC: 3 | RNVC: 2
28200160033E0: RNCC: 5 | RNVC: 2

24 Jul 2007

5340-12-324-6327
Webbing Strap

123246327
79017/026-1700-0100: RNCC: 3 | RNVC: 2
79017/026-1700-100: RNCC: 3 | RNVC: 2
79017/026-1700-0100: RNCC: 5 | RNVC: 9
79017/026-1700-100: RNCC: 5 | RNVC: 9

8 Mar 1991

5340-12-307-7168
Plain Solid Disk

123077168
706726-0005.000: RNCC: 3 | RNVC: 2
706726-0005: RNCC: 5 | RNVC: 2

18 Jul 1986

5340-12-346-3222
Lock-Release Lever

123463222
CF 842 255 BE: RNCC: 3 | RNVC: 2

10 Jul 1998

5340-12-355-3422
Mounting Bracket

123553422
GE8319G153: RNCC: 3 | RNVC: 2
GE8319G153: RNCC: 5 | RNVC: 9

6 Nov 2001

5340-12-340-2643
Nonmetallic Bumper

123402643
9525814: RNCC: 2 | RNVC: 2
9525814: RNCC: 3 | RNVC: 2

20 Mar 1996

5340-12-011-5345

5340-12-394-1136
Arched Cushion

123941136
CTP40990P004: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-391-4448
Access Cover

123914448
I006274TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-340-6926
Angle Bracket

123406926
8452331201: RNCC: 3 | RNVC: 2
84523 31201: RNCC: 5 | RNVC: 9

24 May 1996

5340-12-340-4720
Loop Clamp

123404720
0240-706R: RNCC: 3 | RNVC: 2
C157: RNCC: 5 | RNVC: 2

19 Apr 1996

5340-12-326-7996
Mending Plate

123267996
1512-9300.06: RNCC: 3 | RNVC: 2
1512-9300.06: RNCC: 5 | RNVC: 2

25 Oct 1991

5340-12-339-7219
Retaining Strap

123397219
BSAE020: RNCC: 3 | RNVC: 2

4 Jan 1996

5340-12-359-5829
Cushioning Pad

123595829
304831: RNCC: 3 | RNVC: 2
093.04.0179: RNCC: 5 | RNVC: 2

19 Feb 2003

5340-12-190-5813
Angle Bracket

121905813
1000078-111100.10: RNCC: 2 | RNVC: 2
1000078-111100.10: RNCC: 3 | RNVC: 2
1000078-111100.10: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-322-9588
Mending Plate

123229588
119235: RNCC: 3 | RNVC: 2

11 Oct 1990

5340-12-381-0437
Retaining Clamp Assembly

123810437
MAJ-960: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-173-4567
Retaining Strap

121734567
LN29836B1-40: RNCC: 2 | RNVC: 2

18 Apr 1978

5340-12-369-6363
Spring Tension Clip

123696363
81976510111: RNCC: 3 | RNVC: 2
81.97651-0111: RNCC: 5 | RNVC: 2
81.97651.0111: RNCC: 5 | RNVC: 2

3 Aug 2006

5340-12-344-3390
Angle Bracket

123443390
88416100014: RNCC: 3 | RNVC: 2
88.41610.0014: RNCC: 5 | RNVC: 2

17 Oct 1997

5340-12-392-4159
Butt Hinge

123924159
I007883: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-392-6043
Retaining Bail

123926043
4617910230: RNCC: 3 | RNVC: 2
B014631: RNCC: 5 | RNVC: 2

21 Jun 2013

5340-12-357-9187
Mounting Bracket

123579187
2300388-250120.000: RNCC: 2 | RNVC: 2
2300388-250120.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-375-6860
Access Cover

123756860
L252M4818101: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-311-6554
Door Handle

123116554
4429K: RNCC: 3 | RNVC: 2
570340177: RNCC: 5 | RNVC: 2

1 Oct 1987

5340-12-122-2378

5340-12-198-0977
Mending Plate

121980977
1200096-15C000007: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-340-6953
Hand Crank

123406953
BHAA014: RNCC: 3 | RNVC: 2
463-611214.000: RNCC: 5 | RNVC: 2

24 May 1996

5340-12-171-3411
Mounting Bracket

121713411
251244050002: RNCC: 3 | RNVC: 2
251244050002: RNCC: 5 | RNVC: 2

30 Sep 1977

5340-12-310-9186
Access Cover

123109186
4024112-2: RNCC: 3 | RNVC: 2
4038584: RNCC: 5 | RNVC: 2

9 Jul 1987

5340-12-309-6068
Door Button

123096068
03442734: RNCC: 3 | RNVC: 2
5555-06-15.02: RNCC: 5 | RNVC: 2

6 Feb 1987

5340-12-182-9720
Mounting Bracket

121829720
5801697-15500.00: RNCC: 3 | RNVC: 2
5801697-15500-00: RNCC: 5 | RNVC: 2
5801697-15500.00: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-152-5632
Retaining Strap

121525632
E7101-60-770-45: RNCC: 3 | RNVC: 2
7101-60-770-45: RNCC: 5 | RNVC: 2
7101-60-770.45: RNCC: 5 | RNVC: 2
164083046: RNCC: 5 | RNVC: 2
7101-60-770-45: RNCC: 5 | RNVC: 9
7101-60-770.45: RNCC: 5 | RNVC: 9
E7101-60-770-45: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-8325
Cover Retainer

123938325
11.48944-0553: RNCC: 3 | RNVC: 2
11.48944-0553: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-12-363-6785
Mounting Bracket

123636785
2500246-986100.00: RNCC: 2 | RNVC: 2

14 Jul 2004

5340-12-311-8427
Access Cover

123118427
2300074-5882.01: RNCC: 2 | RNVC: 2
2300074-5882.01: RNCC: 3 | RNVC: 2
2300074-5882.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-310-6958
Mending Plate

123106958
201281: RNCC: 3 | RNVC: 2

22 Jun 1987

5340-12-357-3460
Access Hole Frame

123573460
8812000142: RNCC: 2 | RNVC: 2
8812000142: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-357-5249
Dust And Moisture Seal Protective Plug

123575249
735084065000: RNCC: 3 | RNVC: 2
65MTN5084: RNCC: 5 | RNVC: 2

28 Jun 2002

5340-12-333-9472
Mounting Bracket

123339472
15 0004 718: RNCC: 3 | RNVC: 2
150004718: RNCC: 5 | RNVC: 2

25 Feb 1994

5340-12-180-9560
Mending Plate

121809560
81974850009: RNCC: 3 | RNVC: 2

12 Oct 1979

5340-12-383-7108
Bumper

123837108
50041997: RNCC: 3 | RNVC: 2
50041997: RNCC: 5 | RNVC: 2
4397463: RNCC: 5 | RNVC: 2

29 Nov 2010

5340-12-388-5339
Mounting Bracket

123885339
5842002840: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-359-5972
Mounting Plate

123595972
EL670.01.028: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-336-7053
Retaining Strap

123367053
28209952320: RNCC: 3 | RNVC: 2
28209952320 E0: RNCC: 5 | RNVC: 2

12 Dec 1994

5340-12-348-1588
Double Angle Bracket

123481588
7731428: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-12-383-3849
Webbing Strap

123833849
UK025/L=620MM: RNCC: 3 | RNVC: 2

14 Oct 2010

5340-12-701-6351
Mounting Plate

127016351
VG95211-ML-127016351: RNCC: 2 | RNVC: 2
5.12.7060.1480.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-2615
Metal Runner

121872615
4-141-0006: RNCC: 3 | RNVC: 2
4-141-006 4: RNCC: 5 | RNVC: 2

23 Mar 1981

5340-12-361-0371
Double Angle Bracket

123610371
J92226489-401: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-162-7403
Nonmetallic Bumper

121627403
14021-17001-03: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-143-1171
Manual Control Handle

121431171
DIN99-N100-VERCADMET: RNCC: 2 | RNVC: 2
E16XM12DIN99VERKADMET: RNCC: 5 | RNVC: 2
N100DIN99VERKADMET: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-5634
Mending Plate

123085634
5801392-1012.004: RNCC: 3 | RNVC: 2
5801392-1012-004: RNCC: 5 | RNVC: 2

23 Oct 1986

5340-12-176-6638
Dust And Moisture Seal Protective Cap

121766638
51-6861-615-15: RNCC: 3 | RNVC: 2

11 Dec 1978

5340-12-334-2148
Double Angle Bracket

123342148
45 250 38 151: RNCC: 3 | RNVC: 2
45 250 38 121: RNCC: 5 | RNVC: 9

13 Apr 1994

5340-12-390-6973
Rod End Clevis

123906973
L321P1011101: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-326-4897
Mending Plate

123264897
272.372 768: RNCC: 2 | RNVC: 2
272.372.768: RNCC: 3 | RNVC: 2
272.372 768: RNCC: 5 | RNVC: 9

24 Sep 1991

5340-12-094-1577

5340-12-370-2727
Helical Compression Spring Retainer

123702727
90375348: RNCC: 3 | RNVC: 2
0312509: RNCC: 5 | RNVC: 2

19 Oct 2006

5340-12-351-8426
Manual Control Handle

123518426
10063-322000.03: RNCC: 3 | RNVC: 2
10063-322000.03: RNCC: 5 | RNVC: 9

1 Sep 2000

5340-12-353-8151
Latch Bar

123538151
16001464: RNCC: 3 | RNVC: 2

11 May 2001

5340-12-378-3761
Retaining Strap

123783761
7H0819055: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-331-7148
Helical Compression Spring Seat

123317148
55.2509.000.05: RNCC: 3 | RNVC: 2

14 Jun 1993

5340-12-383-9015
Access Cover

123839015
981 236 040 000: RNCC: 3 | RNVC: 2

20 Dec 2010

5340-12-318-5722
Mounting Plate

123185722
4585501: RNCC: 3 | RNVC: 2

28 Jul 1989

5340-12-123-2647
Retaining Strap

121232647
K16337: RNCC: 3 | RNVC: 2
0334 1451: RNCC: 5 | RNVC: 2
K16337: RNCC: 5 | RNVC: 2
3341451EF5052-81: RNCC: 5 | RNVC: 2
3341451: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-7224
Angle Bracket

123157224
3874660940: RNCC: 3 | RNVC: 2

23 Nov 1988

5340-12-341-5135
Access Cover

123415135
2500262-970310.000.0: RNCC: 2 | RNVC: 2
2500262-970310.000.0: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-12-300-9412
Metal Runner

123009412
1423-910.92(3): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-701-7098
Mounting Bracket

127017098
VG95211-ML-127017098: RNCC: 2 | RNVC: 2
5.12.7601.2180.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-384-1469
Latch Bar

123841469
598102-185350.004.0: RNCC: 2 | RNVC: 2
598102-185350.004.0: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-12-166-6029
Helical Compression Spring Retainer

121666029
WW402581A: RNCC: 3 | RNVC: 9
WW 402 581 A: RNCC: 5 | RNVC: 2
WW402581A: RNCC: 5 | RNVC: 2
WW 402 581 A: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-332-4868
Webbing Strap

123324868
01802-2-SCHLAUFE-FE300-LE1400MM: RNCC: 3 | RNVC: 2
01802-2-SCHLAUFE-FE300-LE1400: RNCC: 3 | RNVC: 2
01802-2-FE300MM-LE1400MM: RNCC: 5 | RNVC: 2
79036/SCHLAUFE-1700-300: RNCC: 5 | RNVC: 2
01802-2-FE=300-LE=1400: RNCC: 5 | RNVC: 2
01802-2-FE300-LE1400: RNCC: 5 | RNVC: 2
DIN60060-2-25X300X1400-C1/SCHLAU: RNCC: 5 | RNVC: 9

16 Aug 1993

5340-12-315-6654
Mending Plate

123156654
510252-3342.000: RNCC: 3 | RNVC: 2
510252-3342: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-324-2290
Angle Bracket

123242290
5801352-5704.01: RNCC: 2 | RNVC: 2
5801352-5704.01: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-12-317-2479
Access Cover

123172479
53417-001: RNCC: 3 | RNVC: 2
53 417-001: RNCC: 5 | RNVC: 9

21 Mar 1989

5340-12-123-3332
Platte

121233332
E5645-16-01-29: RNCC: 3 | RNVC: 2
5645-16-01-29: RNCC: 5 | RNVC: 9
5645-16-01.29: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-3813
Angle Bracket

121963813
2300013-3419.00: RNCC: 2 | RNVC: 2
2300013-3419.00: RNCC: 3 | RNVC: 2
2300013-3419.00: RNCC: 5 | RNVC: 9
2300013-3419-00: RNCC: 5 | RNVC: 9

30 Jun 1983

5340-12-391-7263
Loop Clamp

123917263
TORRO 20-32/12 C7 W3: RNCC: 3 | RNVC: 2
01360703026: RNCC: 5 | RNVC: 2

2 Apr 2013

5340-12-342-2401
Helical Compression Spring Seat

123422401
11200720138: RNCC: 3 | RNVC: 2
11200720138: RNCC: 5 | RNVC: 2
200.07.020: RNCC: 5 | RNVC: 2
11.20072-0138: RNCC: 5 | RNVC: 2

9 Jan 1997

5340-12-354-8910
Mounting Bracket

123548910
5400049-111820.13: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-12-702-1708
Mounting Plate

127021708
VG95211-ML-127021708: RNCC: 2 | RNVC: 2
30.7117.100: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-7995
Angle Bracket

123387995
6700017-630040.01: RNCC: 2 | RNVC: 2
6700017-630040.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-185-0920
Dust And Moisture Seal Protective Cap

121850920
250/12: RNCC: 3 | RNVC: 2
GPN250-12: RNCC: 5 | RNVC: 2
GPN250/12: RNCC: 5 | RNVC: 2
12GPN250: RNCC: 5 | RNVC: 9
12: RNCC: 5 | RNVC: 9
250012000: RNCC: 5 | RNVC: 9
GPN250-12: RNCC: 5 | RNVC: 9

9 Sep 1980

5340-12-319-7362
Resilient Mount

123197362
62001: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-12-183-1435
Rod End Clevis

121831435
2301501: RNCC: 3 | RNVC: 2

20 Mar 1980

5340-12-341-2709
Electronic Equipment Hardware Kit

123412709
60 99999: RNCC: 3 | RNVC: 2

16 Aug 1996

5340-12-191-9144
Spring Tension Clip

121919144
M5280: RNCC: 3 | RNVC: 2
431.9932: RNCC: 5 | RNVC: 2
4319932: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-366-4037
Mechanical Stop

123664037
105042: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-12-344-3393
Mending Plate

123443393
81429400215: RNCC: 3 | RNVC: 2
81.42940.0215: RNCC: 5 | RNVC: 2

17 Oct 1997

5340-12-339-9277
Casement Fastener

123399277
SZ2304000: RNCC: 3 | RNVC: 2
SZ2304: RNCC: 5 | RNVC: 2
SZ2304.000: RNCC: 5 | RNVC: 2
SZ2304: RNCC: 5 | RNVC: 2

1 Feb 1996

5340-12-380-1734
Mounting Bracket

123801734
S993M2068101: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-12-368-9406
Access Door Hinge

123689406
2452120: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-321-9332
Helical Compression Spring Seat

123219332
1480120089: RNCC: 3 | RNVC: 2
1480120089: RNCC: 5 | RNVC: 2
1480120089: RNCC: 5 | RNVC: 9

10 Jul 1990

5340-12-360-7246
Dust And Moisture Seal Protective Plug

123607246
270R120605: RNCC: 3 | RNVC: 2
GPN270R120605: RNCC: 5 | RNVC: 2

2 Jul 2003

5340-12-327-1763
Angle Bracket

123271763
272.367.580: RNCC: 3 | RNVC: 2
272.367 580: RNCC: 5 | RNVC: 9

11 Dec 1991

5340-12-342-5734
Access Cover

123425734
4103650189: RNCC: 3 | RNVC: 2

28 Feb 1997

5340-12-382-1325
Mounting Bracket

123821325
1531316021: RNCC: 3 | RNVC: 2

12 May 2010

5340-12-024-7441

5340-12-176-4899
Butt Hinge Leaf

121764899
WW 306 067 BR: RNCC: 2 | RNVC: 2
WW 306 067 BR: RNCC: 3 | RNVC: 9
WW 306 067 AR: RNCC: 5 | RNVC: 2
WW 306 067 BR: RNCC: 5 | RNVC: 2
WW306067AR: RNCC: 5 | RNVC: 2
WW306067AR: RNCC: 5 | RNVC: 9
WW 306 067 AR: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-351-5007
Mounting Bracket

123515007
4615201441: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-345-0139
Verriegelung Hebel

5340-12-344-0588
Double Angle Bracket

123440588
7620217: RNCC: 3 | RNVC: 2
762.0217: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-342-5731
Access Cover

123425731
4110656712: RNCC: 3 | RNVC: 2
4110016712: RNCC: 5 | RNVC: 2

28 Feb 1997

5340-12-334-8781
Nut And Bolt Locking Plate

123348781
5800750173: RNCC: 3 | RNVC: 2
580 075 01 73: RNCC: 5 | RNVC: 2

30 Jun 1994

5340-12-316-3574
Butt Hinge

123163574
2300035-230512.02: RNCC: 2 | RNVC: 2
2300035-230512.02: RNCC: 5 | RNVC: 9
2300035-230512.02: RNCC: 5 | RNVC: 9

12 Jan 1989

5340-12-327-9979
Mounting Bracket

123279979
021.451755: RNCC: 3 | RNVC: 2

27 Mar 1992

5340-12-380-3774
Dust And Moisture Seal Protective Cap

123803774
6708110018: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-382-3442
Lock-Release Lever

123823442
4561.002.223.000000: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-349-4507
Dust And Moisture Seal Protective Cap-Plug

123494507
3252059020: RNCC: 3 | RNVC: 2
32520 59020: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-12-175-1851
Angle Bracket

121751851
03416192: RNCC: 3 | RNVC: 2
3416192EE5042-72: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-349-6290
Mechanical Stop

123496290
577.999.620: RNCC: 3 | RNVC: 2

12 Dec 1999

5340-12-350-8017
Friction Catch Stud Receptacle

123508017
251843668: RNCC: 3 | RNVC: 2

23 May 2000

5340-12-368-6890
Retaining Strap

123686890
221000500500: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-12-374-3079
Mechanical Stop

123743079
5325014: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-353-5104
Access Cover

123535104
160-75547: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-12-302-0384
Lock-Release Lever

123020384
3816600019: RNCC: 3 | RNVC: 2

28 Nov 1984

5340-12-389-0964
Caster Frame

123890964
154847: RNCC: 3 | RNVC: 2
G20825: RNCC: 5 | RNVC: 2

25 May 2012

5340-12-191-9084
Angle Bracket

121919084
8332360140: RNCC: 2 | RNVC: 2
8332360140: RNCC: 3 | RNVC: 2

16 Mar 1982

5340-12-359-7361
Mounting Bracket

123597361
S282M2013101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-348-5556
Retaining Strap

123485556
1079501: RNCC: 3 | RNVC: 2

16 Jul 1999

5340-12-186-7621
Nonmetallic Bumper

121867621
4606-0083.03: RNCC: 3 | RNVC: 2
4606-0083-03: RNCC: 5 | RNVC: 9

2 Feb 1981

5340-12-359-9751
Bow Handle

123599751
63382-002: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-343-0176
Handle Grip

123430176
5004-039: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-002-0863

5340-12-309-4660
Dust And Moisture Seal Protective Plug

123094660
3819973186: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-12-334-4912
Spring Tension Clip

123344912
1676677900: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-374-2947
Section Block Clamp

123742947
5308153: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-022-3487

5340-12-172-1468
Nonmetallic Solid Wheel

121721468
140BC0L65R0: RNCC: 3 | RNVC: 2

22 Dec 1977

5340-12-311-8981
Dust And Moisture Seal Protective Cap

123118981
166037: RNCC: 2 | RNVC: 2
166037: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-12-040-8100

5340-12-043-2673

5340-12-362-9784
Mounting Bracket

123629784
2300042-992911.000: RNCC: 2 | RNVC: 2
2300042-992911.000: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-318-3862
Bow Handle

123183862
54.0061.119.00: RNCC: 3 | RNVC: 2

10 Jul 1989

5340-12-020-1761

5340-12-358-1160
Flush Lock

123581160
85626806007: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-12-385-6267
Double Angle Bracket

123856267
5601870340: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-12-375-4692
Mounting Bracket

123754692
1521442: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-357-6317
Dust And Moisture Seal Protective Cap-Plug

123576317
028130229: RNCC: 1 | RNVC: 2
028130229: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-355-6438
Mounting Bracket

123556438
4618907414: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-355-9570
Retaining Strap

123559570
1279950020: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-322-5921
Retaining Strap

123225921
062.00.002C: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-12-195-2606
Dust And Moisture Seal Protective Cap

121952606
PAN3860-03: RNCC: 3 | RNVC: 2

31 Jan 1983

5340-12-334-0179
Spacing Threaded Standoff

123340179
NO PRIMARY REF 12-334-0179: RNCC: 3 | RNVC: 2
ABS: RNCC: 5 | RNVC: 9
ABS 3050 12: RNCC: 5 | RNVC: 9
ABS305012: RNCC: 5 | RNVC: 9

9 Mar 1994

5340-12-303-1508
Lock-Release Lever

123031508
0A844.32-21-00-00-005: RNCC: 3 | RNVC: 2

28 Feb 1985

5340-12-306-3649
Catch Strike

123063649
47042-001: RNCC: 3 | RNVC: 2
47 042-001: RNCC: 5 | RNVC: 9

24 Feb 1986

5340-12-312-7889
Resilient Mount

123127889
90257/TP286: RNCC: 3 | RNVC: 2
057900018: RNCC: 3 | RNVC: 2
90257/TP286: RNCC: 5 | RNVC: 9

5 Feb 1988

5340-12-345-1635
Mounting Bracket

123451635
28200785641: RNCC: 3 | RNVC: 2
2820 078 56 41E0: RNCC: 5 | RNVC: 2

6 Feb 1998

5340-12-338-1075
Mounting Plate

123381075
160-75754: RNCC: 3 | RNVC: 2
160-75754: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-386-4290
Electronic Equipment Hardware Kit

123864290
5005312882: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-390-0495
Section Block Clamp

123900495
311689: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-011-5007

5340-12-352-2192
Mounting Bracket

123522192
5205661: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-385-6222
Block Clamp

123856222
5849951768: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-12-388-3787
Retaining Clip

123883787
502061: RNCC: 3 | RNVC: 2
66.29.2223-02: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-12-192-9586
Sealing Plug Assembly

121929586
537152-0013: RNCC: 3 | RNVC: 2
537152-0320: RNCC: 5 | RNVC: 2
53 71 52-0013: RNCC: 5 | RNVC: 2
537152-0320: RNCC: 5 | RNVC: 2
537152-0320.000: RNCC: 5 | RNVC: 2
53 71 52-0013: RNCC: 5 | RNVC: 2
537152-0013: RNCC: 5 | RNVC: 9

7 Jun 1982

5340-12-365-5857
Angle Bracket

123655857
J29120111-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-313-4805
Nonmetallic Bumper

123134805
801-639.01.10.12: RNCC: 3 | RNVC: 2

7 Apr 1988

5340-12-325-6140
Spring Tension Clip

123256140
TY5-K3: RNCC: 3 | RNVC: 2
0005461243: RNCC: 5 | RNVC: 2

21 Jun 1991

5340-12-363-8480
Mounting Bracket

123638480
J28630017-403: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-393-1434
Mending Plate

123931434
81429400206: RNCC: 3 | RNVC: 2
81.42940-0206: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-12-355-5354
Nonmetallic Bumper

123555354
2125-131100.02B: RNCC: 2 | RNVC: 2
2125-131100.02B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-181-7768
Expansion Plug

121817768
DIN443-34-ST-ROH: RNCC: 2 | RNVC: 2
1124657EY8828-60: RNCC: 5 | RNVC: 2
34DIN443: RNCC: 5 | RNVC: 2
0112 4657: RNCC: 5 | RNVC: 2
1124657: RNCC: 5 | RNVC: 9

14 Dec 1979

5340-12-349-2672
Loop Clamp

123492672
A19B-642000.05: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-12-324-8011
Mounting Plate

123248011
54.0023.400.05: RNCC: 3 | RNVC: 2

25 Mar 1991

5340-12-135-6700

5340-12-358-7987
Mounting Bracket

123587987
3898120014: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-303-5765
Butt Hinge Leaf

123035765
52.0256.000.20: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-158-6917
Nonmetallic Bumper

121586917
068400: RNCC: 3 | RNVC: 2
225-43098: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-361-0522
Mounting Bracket

123610522
352660: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-163-9767
Dust And Moisture Seal Protective Plug

121639767
300V2: RNCC: 3 | RNVC: 2
300V2: RNCC: 5 | RNVC: 2
GPN300V2: RNCC: 5 | RNVC: 2
GPN300V2: RNCC: 5 | RNVC: 2
301000200: RNCC: 5 | RNVC: 9
V2GPN300: RNCC: 5 | RNVC: 9
GPN300,V2: RNCC: 5 | RNVC: 9
V2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-2710
Snap Hook

123592710
7103185: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-12-358-8752
Rim Lock

123588752
225.59.913: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-359-4304
Manual Control Handle

123594304
7891.15.00: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-339-7648
Dust And Moisture Seal Protective Plug

123397648
140304: RNCC: 3 | RNVC: 2
140304: RNCC: 5 | RNVC: 9

15 Jan 1996

5340-12-350-9018
Retaining Strap

123509018
T262M5001201: RNCC: 3 | RNVC: 2

31 May 2000

5340-12-353-7706
Mechanical Stop

123537706
CBD45017P07: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-346-2712
Anschlagecke

123462712
10.0000.092: RNCC: 2 | RNVC: 2
10.0000.092: RNCC: 3 | RNVC: 2

6 Jul 1998

5340-12-343-0915
Ball Socket Seat

123430915
1800 7911: RNCC: 3 | RNVC: 2
80079: RNCC: 5 | RNVC: 2
18007911: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-198-1708
Handwheel

121981708
E801-00-2-3: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-321-4887
Multiple Angle Bracket

123214887
702-237940-904-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-331-6507
Angle Bracket

123316507
2300264-064511.00.0: RNCC: 2 | RNVC: 2
2300264-064511.00.0: RNCC: 3 | RNVC: 2

3 Jun 1993

5340-12-184-2198
Angle Bracket

121842198
5801352-1100.06: RNCC: 2 | RNVC: 2
5801352-1100.06: RNCC: 3 | RNVC: 2
5801352-1100-06: RNCC: 5 | RNVC: 2
5801352-1100-06: RNCC: 5 | RNVC: 9
5801352-1100-06: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-364-6647
Access Door Hinge

123646647
2500262-250500.004.0: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-328-9741
Nonmetallic Bumper

123289741
2300232-974030.002.0: RNCC: 2 | RNVC: 2
2300232-974030.002.0: RNCC: 3 | RNVC: 2
2300232-974030.002.0: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-347-5799
Extension Handle

123475799
97.0093.7754: RNCC: 3 | RNVC: 2
999999 01631 4 6005: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-364-4427
Runner

123644427
T621P1002208: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-376-4355
Mechanical Stop

123764355
120159: RNCC: 3 | RNVC: 2
BSO 1030: RNCC: 5 | RNVC: 2

30 Sep 2008

5340-12-379-3620
Mounting Bracket

123793620
0105869: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-12-197-2054
Nonmetallic Bumper

121972054
4427660005: RNCC: 3 | RNVC: 2

29 Sep 1983

5340-12-179-2714
Webbing Strap

121792714
183871223: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-179-7601
Mounting Bracket

121797601
81429062039: RNCC: 3 | RNVC: 2
81.42906.2039: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-361-5303
Nonmetallic Bumper

123615303
5140740: RNCC: 3 | RNVC: 2
5140740: RNCC: 5 | RNVC: 2

14 Oct 2003

5340-12-311-1127
Mending Plate

123111127
2300074-5891.01: RNCC: 2 | RNVC: 2
2300074-5891.01: RNCC: 3 | RNVC: 2
2300074-5891.01: RNCC: 5 | RNVC: 9

28 Jul 1987

5340-12-356-1908
Multiple Eye Pad

123561908
T341M1001201: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-133-2979

5340-12-374-2509
Strap Hinge

123742509
L533M1143207: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-317-9608
Mounting Bracket

123179608
3316301: RNCC: 3 | RNVC: 2

30 May 1989

5340-12-338-2398
Angle Bracket

123382398
0459801: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-12-338-2399
Angle Bracket

123382399
0466301: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-12-369-2581
Multiple Angle Bracket

123692581
1505361: RNCC: 3 | RNVC: 2
15004351: RNCC: 5 | RNVC: 2

12 Jun 2006

5340-12-365-7096
Butt Hinge

123657096
9438200046: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-044-0640

5340-12-304-1745
Rim Lock

123041745
6000282: RNCC: 3 | RNVC: 2
600 0282: RNCC: 5 | RNVC: 2
7402016: RNCC: 5 | RNVC: 2

19 Jun 1985

5340-12-302-0963
Mending Plate

123020963
9837526: RNCC: 3 | RNVC: 2
9837526: RNCC: 5 | RNVC: 9
2300164-291040-012: RNCC: 5 | RNVC: 9
2300164-291040.012: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-12-312-3109
Gummi- Riemen

123123109
2300074-4182.00: RNCC: 2 | RNVC: 2
2300074-4182.00: RNCC: 3 | RNVC: 2
82300-2300074-4182.00: RNCC: 3 | RNVC: 2
2300074-4182.00: RNCC: 5 | RNVC: 9
2300074-4182.00: RNCC: 5 | RNVC: 9
82300-R130X20-NR-STZN-SW: RNCC: 6 | RNVC: 9

15 Dec 1987

5340-12-314-2049
Access Cover

123142049
272.1765.21-04: RNCC: 2 | RNVC: 2
272.1765.21-04: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-183-5197
Headless Straight Rod

121835197
5801441-30300.001: RNCC: 2 | RNVC: 2
5801441-30300.001: RNCC: 3 | RNVC: 2
5801441-30300-001: RNCC: 5 | RNVC: 2
5801441-30300.001: RNCC: 5 | RNVC: 9
5801441-30300-001: RNCC: 5 | RNVC: 9

24 Apr 1980

5340-12-319-8405
Hinged Hasp

123198405
4900288-021500.00: RNCC: 2 | RNVC: 2
4312 711 17560: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-303-0243
Angle Bracket

123030243
476.129: RNCC: 3 | RNVC: 2
0008354214: RNCC: 5 | RNVC: 2

21 Feb 1985

5340-12-133-7790

5340-12-356-1491
Webbing Strap

123561491
4617901379: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-349-7826
Retaining Strap

123497826
T290M2202262: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-355-5760
Webbing Strap

123555760
17.108.3710.03: RNCC: 2 | RNVC: 2
17.108.3710.03: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-391-7443
Dust And Moisture Seal Protective Cap

123917443
0009876245: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-12-194-3712
Spring Holder

121943712
211843393C: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-12-386-3455
Mounting Bracket

123863455
600100280000: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-12-377-1946
Mounting Plate

123771946
306309: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-301-1341
Angle Bracket

123011341
4245512540: RNCC: 3 | RNVC: 2

22 Sep 1984

5340-12-374-8854
Angle Bracket

123748854
SK871-192600.001.0: RNCC: 3 | RNVC: 2
1705551: RNCC: 5 | RNVC: 9

3 Apr 2008

5340-12-300-3171
Nonmetallic Bumper

123003171
250146-193800.04.0: RNCC: 2 | RNVC: 2
250146-193800.04.0: RNCC: 3 | RNVC: 2
250146-193800-04-0: RNCC: 5 | RNVC: 2

24 Jul 1984

5340-12-317-3462
Loop Clamp

123173462
DIN3015-L-KP-3-R-22-PA6: RNCC: 2 | RNVC: 2
HRL3KP22PA: RNCC: 3 | RNVC: 2
RANR-322: RNCC: 3 | RNVC: 2
322PA: RNCC: 3 | RNVC: 2
RANR-322: RNCC: 5 | RNVC: 2
322PA: RNCC: 5 | RNVC: 2
322-UL: RNCC: 5 | RNVC: 2
1920771: RNCC: 5 | RNVC: 2
DIN3015-L-KP-3-R-22-PA: RNCC: 5 | RNVC: 2
DIN3015-LKP3R-22PA: RNCC: 5 | RNVC: 2

30 Mar 1989

5340-12-184-2454
Loop Clamp

121842454
DIN3016-2-G1-167X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-167X20-W1-2: RNCC: 3 | RNVC: 2
SP167/20SKZ: RNCC: 3 | RNVC: 2
183805847: RNCC: 3 | RNVC: 2
1510000167: RNCC: 5 | RNVC: 2
SP167-20SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-167X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-G167X20-W1: RNCC: 5 | RNVC: 9

10 Jul 1980

5340-12-154-2639
Compression Cup

121542639
H170-2-88NBR/101: RNCC: 3 | RNVC: 2
H170-2-14PA101: RNCC: 5 | RNVC: 2
H170-2-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-166-6625
Furniture Glide

121666625
1200009-0600.002: RNCC: 2 | RNVC: 2
1200009-0600.002: RNCC: 3 | RNVC: 2
26.15-1: RNCC: 3 | RNVC: 2
26-15-1: RNCC: 5 | RNVC: 2
9722424004: RNCC: 5 | RNVC: 2
1200009-0600-002: RNCC: 5 | RNVC: 9
1200009-0600.002: RNCC: 5 | RNVC: 9
97224 24004: RNCC: 5 | RNVC: 9

5 Oct 1976

5340-12-309-5366
Dust And Moisture Seal Protective Cap

123095366
6600154-0.08: RNCC: 2 | RNVC: 2
K7501: RNCC: 3 | RNVC: 2

2 Feb 1987

5340-12-390-4098
Mounting Bracket

123904098
6000056-333311.012.0: RNCC: 2 | RNVC: 2
6000056-333311.012.0: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-342-1571
Mounting Bracket

123421571
5611500073: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-359-0494
Pawl Fastener

123590494
00001026238: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-357-8529
Mounting Plate

123578529
TA3004P005: RNCC: 3 | RNVC: 2

2 Aug 2002

5340-12-338-8348
Pawl Fastener

123388348
6735128: RNCC: 2 | RNVC: 2
6735128: RNCC: 3 | RNVC: 2
6735128: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-389-0626
Shimmy Damper

123890626
0587200500: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-094-2904

5340-12-700-8673
Loop Clamp

127008673
VG95211-ML-127008673: RNCC: 2 | RNVC: 2
155N464-13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-362-5382
Angle Bracket

123625382
ED41-1388-00001-122: RNCC: 2 | RNVC: 2
ED41-1388-00001-122: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-338-8043
Mounting Plate

123388043
6700017-202341.00: RNCC: 2 | RNVC: 2
6700017-202341.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-304-6510
Bow Handle

123046510
VG95149A235AL-SW: RNCC: 2 | RNVC: 2
16856-01: RNCC: 3 | RNVC: 2

8 Aug 1985

5340-12-179-1261
Bow Handle

121791261
CF 432 040: RNCC: 2 | RNVC: 2
CF 432 040: RNCC: 3 | RNVC: 2
CF432040: RNCC: 5 | RNVC: 2
CF432040: RNCC: 5 | RNVC: 2
CF 432 040: RNCC: 5 | RNVC: 2
CF432040: RNCC: 5 | RNVC: 2
CF 432 040: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-181-1079
Retaining Strap

121811079
81669190001: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-390-8158
Dust And Moisture Seal Protective Plug

123908158
GPN300F4RAL9005: RNCC: 3 | RNVC: 2

14 Dec 2012

5340-12-361-4319
Caster Wheel

123614319
N 3772: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-167-0533
Loop Clamp

121670533
LN29849-2: RNCC: 2 | RNVC: 2
2LN29849: RNCC: 5 | RNVC: 2

13 Nov 1976

5340-12-379-9484
Mounting Bracket

123799484
96500064: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-379-4685
Clamping Catch

123794685
501.117K: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-12-702-5424
Blank Panel

127025424
VG95211-ML-127025424: RNCC: 2 | RNVC: 2
5.51.7210.0640.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-339-0217
Butt Hinge Leaf

123390217
2300348-186130.001.0: RNCC: 2 | RNVC: 2
2300348-186130.001.0: RNCC: 3 | RNVC: 2
1807189: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-338-1085
Retaining Strap

123381085
160-76189: RNCC: 3 | RNVC: 2
15160-76189: RNCC: 5 | RNVC: 2
160-76189: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-190-6884
Double Angle Bracket

121906884
1200037-112.019: RNCC: 3 | RNVC: 2
1200037-112-019: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-318-1287
Mounting Bracket

123181287
5600023-190115.000.0: RNCC: 2 | RNVC: 2
5600023-190115.000.0: RNCC: 3 | RNVC: 2
1596676: RNCC: 5 | RNVC: 2

14 Jun 1989

5340-12-701-4763
Mounting Bracket

127014763
VG95211-ML-127014763: RNCC: 2 | RNVC: 2
5.12.5811.0521.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-0575
Leather Strap

123180575
4617780776: RNCC: 3 | RNVC: 2
7211762851: RNCC: 3 | RNVC: 9

8 Jun 1989

5340-12-359-6949
Loop Clamp

123596949
50388000: RNCC: 3 | RNVC: 2
05722568: RNCC: 5 | RNVC: 2

26 Feb 2003

5340-12-123-1042

5340-12-360-1416
Dust And Moisture Seal Protective Cap

123601416
280ER21: RNCC: 3 | RNVC: 2
GPN280ER21: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-379-1379
Lock Key

123791379
0091445-SCHLUESSELROHLING: RNCC: 3 | RNVC: 2

25 Jun 2009

5340-12-183-8112
Dust And Moisture Seal Protective Plug

121838112
311805707: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-307-0228
Loop Clamp

123070228
51974010374: RNCC: 3 | RNVC: 2
5000498707: RNCC: 5 | RNVC: 2

29 Apr 1986

5340-12-128-6254

5340-12-310-0145
Nonmetallic Bumper

123100145
064686: RNCC: 3 | RNVC: 2

30 Mar 1987

5340-12-146-3529

5340-12-336-2760
Metal Grille

123362760
13637: RNCC: 3 | RNVC: 2
13 637: RNCC: 5 | RNVC: 2

7 Nov 1994

5340-12-175-1008
Nonmetallic Bumper

121751008
3817510297: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-331-4539
Handwheel

123314539
V1083: RNCC: 3 | RNVC: 2
V01083: RNCC: 5 | RNVC: 2
V01083: RNCC: 5 | RNVC: 9
V1083: RNCC: 5 | RNVC: 9

6 May 1993

5340-12-328-9133
Plug Button

123289133
2644: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-326-4001
Angle Bracket

123264001
01TL30675: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-12-172-1699
Recess Handle

121721699
2591: RNCC: 3 | RNVC: 2

27 Dec 1977

5340-12-314-0416
Double Angle Bracket

123140416
6204297440: RNCC: 3 | RNVC: 2
620 429 74 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-337-3655
Mounting Bracket

123373655
81623055010: RNCC: 3 | RNVC: 2
81.62305.5010: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-323-7365
Dust And Moisture Seal Protective Plug Set

123237365
9000 8142: RNCC: 3 | RNVC: 2

12 Dec 1990

5340-12-306-6583
Nonmetallic Bumper

123066583
4357437341: RNCC: 3 | RNVC: 2
4357437341: RNCC: 3 | RNVC: 9

19 Mar 1986

5340-12-162-9584
Retaining Strap

121629584
5900780741: RNCC: 3 | RNVC: 2
5900780741: RNCC: 5 | RNVC: 2
5900780741: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-329-0628
Plug Button

123290628
357121422: RNCC: 3 | RNVC: 2

15 Jul 1992

5340-12-360-7093
Mounting Bracket

123607093
000611-253100.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-147-9019

5340-12-390-2472
Mounting Plate

123902472
316473: RNCC: 3 | RNVC: 2

22 Oct 2012

5340-12-094-1584

5340-12-331-8198
Double Angle Bracket

123318198
160-20656: RNCC: 3 | RNVC: 2
160-20656: RNCC: 5 | RNVC: 9

24 Jun 1993

5340-12-043-8552

5340-12-090-5230

5340-12-127-1258
Retaining Strap

121271258
4049950432: RNCC: 3 | RNVC: 2
224041108400: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-175-8275
Nut And Bolt Locking Plate

121758275
3700020: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-307-8221
Webbing Strap

123078221
AFG0356675: RNCC: 3 | RNVC: 2
MBEU-4476-DP-1: RNCC: 5 | RNVC: 2
MBEU-4476-DP-1: RNCC: 5 | RNVC: 2

30 Jul 1986

5340-12-387-6903
Elastic Strap

123876903
9999075-161042.000.0: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-702-5332
Mounting Bracket

127025332
VG95211-ML-127025332: RNCC: 2 | RNVC: 2
5.51.7070.0300.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-2930
Mending Plate

123082930
P-875217-001: RNCC: 3 | RNVC: 2
P875217-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-313-0195
Angle Bracket

123130195
P-086148-409: RNCC: 3 | RNVC: 2
P086148-409: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-343-3197
Ball Socket Seat

123433197
5610770436: RNCC: 3 | RNVC: 2

5 Jun 1997

5340-12-094-1999

5340-12-333-3993
Protection Bellows

123333993
4259871743: RNCC: 3 | RNVC: 2
DB4259871743: RNCC: 5 | RNVC: 9
4259871743: RNCC: 5 | RNVC: 9

10 Dec 1993

5340-12-145-5350
Retaining Strap

121455350
3229950022: RNCC: 3 | RNVC: 2
3229950022: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-387-1499
Mounting Bracket

123871499
5242030140: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-12-357-1576
Access Cover

123571576
4167929: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-315-3101
Spring Tension Clip

123153101
67.3811.000.08-A002: RNCC: 3 | RNVC: 2
193850: RNCC: 5 | RNVC: 2

12 Oct 1988

Load More Results